brcm2708: update linux 4.4 patches to latest version

As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48966

target/linux/brcm2708/bcm2708/config-4.4

@@ -32,7 +32,6 @@ CONFIG_ARM_THUMB=y
 CONFIG_ARM_UNWIND=y
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_RPI=y
 # CONFIG_BCM2708_NOL2CACHE is not set
 CONFIG_BCM2708_VCHIQ=y
 CONFIG_BCM2708_VCMEM=y
@@ -67,7 +66,6 @@ CONFIG_CMA_SIZE_MBYTES=16
 CONFIG_CMA_SIZE_SEL_MBYTES=y
 # CONFIG_CMA_SIZE_SEL_MIN is not set
 # CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
 CONFIG_COMMON_CLK=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_CONSOLE_TRANSLATIONS=y
@@ -105,7 +103,7 @@ CONFIG_DEFAULT_CFQ=y
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_DEVTMPFS=y
 CONFIG_DMADEVICES=y
-# CONFIG_DMA_BCM2708 is not set
+CONFIG_DMA_BCM2708=y
 CONFIG_DMA_BCM2835=y
 CONFIG_DMA_CMA=y
 CONFIG_DMA_ENGINE=y
@@ -157,6 +155,7 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GENERIC_STRNCPY_FROM_USER=y
 CONFIG_GENERIC_STRNLEN_USER=y
 CONFIG_GPIOLIB=y
+# CONFIG_GPIO_BCM_VIRT is not set
 CONFIG_GPIO_DEVRES=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_HANDLE_DOMAIN_IRQ=y
@@ -293,6 +292,7 @@ CONFIG_PRINTK_TIME=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_PWM=y
 CONFIG_PWM_BCM2835=y
+CONFIG_PWM_SYSFS=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_RATIONAL=y
 CONFIG_RAW_DRIVER=y
@@ -316,7 +316,6 @@ CONFIG_SPARSE_IRQ=y
 CONFIG_SRCU=y
 # CONFIG_STAGING is not set
 # CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_SUNXI_SRAM is not set
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_SWIOTLB=y

target/linux/brcm2708/bcm2709/config-4.4

@@ -38,7 +38,6 @@ CONFIG_ARM_UNWIND=y
 CONFIG_ARM_VIRT_EXT=y
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_RPI=y
 CONFIG_BCM2708_NOL2CACHE=y
 CONFIG_BCM2708_VCHIQ=y
 CONFIG_BCM2708_VCMEM=y
@@ -72,7 +71,6 @@ CONFIG_CMA_SIZE_MBYTES=16
 CONFIG_CMA_SIZE_SEL_MBYTES=y
 # CONFIG_CMA_SIZE_SEL_MIN is not set
 # CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
 CONFIG_COMMON_CLK=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_CONSOLE_TRANSLATIONS=y
@@ -112,7 +110,7 @@ CONFIG_DEFAULT_CFQ=y
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_DEVTMPFS=y
 CONFIG_DMADEVICES=y
-# CONFIG_DMA_BCM2708 is not set
+CONFIG_DMA_BCM2708=y
 CONFIG_DMA_BCM2835=y
 CONFIG_DMA_CMA=y
 CONFIG_DMA_ENGINE=y
@@ -164,6 +162,7 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GENERIC_STRNCPY_FROM_USER=y
 CONFIG_GENERIC_STRNLEN_USER=y
 CONFIG_GPIOLIB=y
+# CONFIG_GPIO_BCM_VIRT is not set
 CONFIG_GPIO_DEVRES=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_HANDLE_DOMAIN_IRQ=y
@@ -311,6 +310,7 @@ CONFIG_PRINTK_TIME=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_PWM=y
 CONFIG_PWM_BCM2835=y
+CONFIG_PWM_SYSFS=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_RATIONAL=y
 CONFIG_RAW_DRIVER=y
@@ -341,7 +341,6 @@ CONFIG_SPARSE_IRQ=y
 CONFIG_SRCU=y
 # CONFIG_STAGING is not set
 # CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_SUNXI_SRAM is not set
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_SWIOTLB=y

target/linux/brcm2708/modules.mk

@@ -289,6 +289,25 @@ endef
 
 $(eval $(call KernelPackage,spi-bcm2835))
 
+define KernelPackage/spi-bcm2835-aux
+  SUBMENU:=$(SPI_MENU)
+  TITLE:=BCM2835 Aux SPI controller driver
+  KCONFIG:=\
+    CONFIG_BCM2708_SPIDEV=n \
+    CONFIG_SPI=y \
+    CONFIG_SPI_BCM2835AUX \
+    CONFIG_SPI_MASTER=y
+  FILES:=$(LINUX_DIR)/drivers/spi/spi-bcm2835aux.ko
+  AUTOLOAD:=$(call AutoLoad,89,spi-bcm2835aux)
+  DEPENDS:=@TARGET_brcm2708
+endef
+
+define KernelPackage/spi-bcm2835-aux/description
+  This package contains the Broadcom 2835 Aux SPI master controller driver
+endef
+
+$(eval $(call KernelPackage,spi-bcm2835-aux))
+
 
 define KernelPackage/hwmon-bcm2835
   TITLE:=BCM2835 HWMON driver

target/linux/brcm2708/patches-4.4/0001-smsx95xx-fix-crimes-against-truesize.patch

@@ -1,7 +1,7 @@
-From e01f4314ca3bad1a9e6e75011e096b2e7c9ae9c1 Mon Sep 17 00:00:00 2001
+From b6cc28abbbf710379772d3da9227ce66926c46a3 Mon Sep 17 00:00:00 2001
 From: Steve Glendinning <steve.glendinning@smsc.com>
 Date: Thu, 19 Feb 2015 18:47:12 +0000
-Subject: [PATCH 001/156] smsx95xx: fix crimes against truesize
+Subject: [PATCH 001/170] smsx95xx: fix crimes against truesize
 
 smsc95xx is adjusting truesize when it shouldn't, and following a recent patch from Eric this is now triggering warnings.
 

target/linux/brcm2708/patches-4.4/0002-smsc95xx-Disable-turbo-mode-by-default.patch

@@ -1,7 +1,7 @@
-From 53c281914c7bb489a5dba2559bdbbdbdc25bd515 Mon Sep 17 00:00:00 2001
+From 37e24d2f0af32632a17692076dddcf176d1af1f7 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Fri, 17 Apr 2015 16:58:45 +0100
-Subject: [PATCH 002/156] smsc95xx: Disable turbo mode by default
+Subject: [PATCH 002/170] smsc95xx: Disable turbo mode by default
 
 ---
  drivers/net/usb/smsc95xx.c | 2 +-

target/linux/brcm2708/patches-4.4/0003-vmstat-Workaround-for-issue-where-dirty-page-count-g.patch

@@ -1,7 +1,7 @@
-From 570a13246efbcaf5f0952f8b2382166ab7677f7d Mon Sep 17 00:00:00 2001
+From d5cb475205138f9df1fdbb74d8810ab1928696ea Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 18 Jun 2014 13:42:01 +0100
-Subject: [PATCH 003/156] vmstat: Workaround for issue where dirty page count
+Subject: [PATCH 003/170] vmstat: Workaround for issue where dirty page count
  goes negative
 
 See:

target/linux/brcm2708/patches-4.4/0004-BCM2835_DT-Fix-I2S-register-map.patch

@@ -1,7 +1,7 @@
-From 030a4127de50633f29388f7cc5170537baa8a46b Mon Sep 17 00:00:00 2001
+From 249a499b1d4b6f8a57b3377d4f505841e99f60c8 Mon Sep 17 00:00:00 2001
 From: Robert Tiemann <rtie@gmx.de>
 Date: Mon, 20 Jul 2015 11:01:25 +0200
-Subject: [PATCH 004/156] BCM2835_DT: Fix I2S register map
+Subject: [PATCH 004/170] BCM2835_DT: Fix I2S register map
 
 ---
  Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt   | 4 ++--

target/linux/brcm2708/patches-4.4/0005-irq-bcm2836-Prevent-spurious-interrupts-and-trap-the.patch

@@ -1,7 +1,7 @@
-From 0e31e724041c5aa97de901e88eb889697605a543 Mon Sep 17 00:00:00 2001
+From c24657505a2aac71d0409b0ef703fc21ecab4b2e Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Fri, 4 Dec 2015 17:41:50 +0000
-Subject: [PATCH 005/156] irq-bcm2836: Prevent spurious interrupts, and trap
+Subject: [PATCH 005/170] irq-bcm2836: Prevent spurious interrupts, and trap
  them early
 
 The old arch-specific IRQ macros included a dsb to ensure the

target/linux/brcm2708/patches-4.4/0006-irqchip-bcm2835-Add-FIQ-support.patch

@@ -1,7 +1,7 @@
-From 05e41ed8765557174e13c868e6bdead409452b9a Mon Sep 17 00:00:00 2001
+From 229bcf2e73ce37e8a18d68773471024c848d84bd Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Fri, 12 Jun 2015 19:01:05 +0200
-Subject: [PATCH 006/156] irqchip: bcm2835: Add FIQ support
+Subject: [PATCH 006/170] irqchip: bcm2835: Add FIQ support
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0007-irqchip-irq-bcm2835-Add-2836-FIQ-support.patch

@@ -1,7 +1,7 @@
-From f5c7fd23e80638ed98babafb2c7d97df569e2bce Mon Sep 17 00:00:00 2001
+From 6780f0a5c6af19f2b9850e961a0f81fbfdfa48fe Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Fri, 23 Oct 2015 16:26:55 +0200
-Subject: [PATCH 007/156] irqchip: irq-bcm2835: Add 2836 FIQ support
+Subject: [PATCH 007/170] irqchip: irq-bcm2835: Add 2836 FIQ support
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0008-serial-8250-Don-t-crash-when-nr_uarts-is-0.patch

@@ -1,7 +1,7 @@
-From 4db60442326172e590b3c34ab5f75f1359d42ec8 Mon Sep 17 00:00:00 2001
+From 4b9529b98c01569dff06f4e67ba28a47318e5ea5 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Tue, 30 Jun 2015 14:12:42 +0100
-Subject: [PATCH 008/156] serial: 8250: Don't crash when nr_uarts is 0
+Subject: [PATCH 008/170] serial: 8250: Don't crash when nr_uarts is 0
 
 ---
  drivers/tty/serial/8250/8250_core.c | 2 ++

target/linux/brcm2708/patches-4.4/0009-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch

@@ -1,7 +1,7 @@
-From e1239426241dc0af5bf9c7eb25b3b5b91f8072f2 Mon Sep 17 00:00:00 2001
+From 5fd6ab82b1027504faa66cf4fc8b999fafaacd12 Mon Sep 17 00:00:00 2001
 From: notro <notro@tronnes.org>
 Date: Thu, 10 Jul 2014 13:59:47 +0200
-Subject: [PATCH 009/156] pinctrl-bcm2835: Set base to 0 give expected gpio
+Subject: [PATCH 009/170] pinctrl-bcm2835: Set base to 0 give expected gpio
  numbering
 
 Signed-off-by: Noralf Tronnes <notro@tronnes.org>

target/linux/brcm2708/patches-4.4/0010-pinctrl-bcm2835-Fix-interrupt-handling-for-GPIOs-28-.patch

@@ -1,7 +1,7 @@
-From 0b7c13febba234187396a3a9a5af92e20deeab88 Mon Sep 17 00:00:00 2001
+From 4254ef2647e89061427836443eac60351b3306a7 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Tue, 24 Feb 2015 13:40:50 +0000
-Subject: [PATCH 010/156] pinctrl-bcm2835: Fix interrupt handling for GPIOs
+Subject: [PATCH 010/170] pinctrl-bcm2835: Fix interrupt handling for GPIOs
  28-31 and 46-53
 
 Contrary to the documentation, the BCM2835 GPIO controller actually has

target/linux/brcm2708/patches-4.4/0011-pinctrl-bcm2835-Only-request-the-interrupts-listed-i.patch

@@ -1,7 +1,7 @@
-From a5cbd1b6abdf86be640d0f312e69046c3e4907f8 Mon Sep 17 00:00:00 2001
+From 93b12e64d0e2a8a65189dedd667e00b0a0fab60a Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Thu, 26 Feb 2015 09:58:22 +0000
-Subject: [PATCH 011/156] pinctrl-bcm2835: Only request the interrupts listed
+Subject: [PATCH 011/170] pinctrl-bcm2835: Only request the interrupts listed
  in the DTB
 
 Although the GPIO controller can generate three interrupts (four counting

target/linux/brcm2708/patches-4.4/0012-spi-bcm2835-Support-pin-groups-other-than-7-11.patch

@@ -1,7 +1,7 @@
-From dd2680dc2e5fd417101093c6618cc5c14ad8f949 Mon Sep 17 00:00:00 2001
+From bb8ff388ad26721eebb7249afb6f6f57bc196de4 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Wed, 24 Jun 2015 14:10:44 +0100
-Subject: [PATCH 012/156] spi-bcm2835: Support pin groups other than 7-11
+Subject: [PATCH 012/170] spi-bcm2835: Support pin groups other than 7-11
 
 The spi-bcm2835 driver automatically uses GPIO chip-selects due to
 some unreliability of the native ones. In doing so it chooses the

target/linux/brcm2708/patches-4.4/0013-ARM-bcm2835-Set-Serial-number-and-Revision.patch

@@ -1,7 +1,7 @@
-From 95d71f47cc485c5d0030291b9388bbdbdc335437 Mon Sep 17 00:00:00 2001
+From bfcfed788d152e828747ea889a88f8b179217ddb Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Wed, 3 Jun 2015 12:26:13 +0200
-Subject: [PATCH 013/156] ARM: bcm2835: Set Serial number and Revision
+Subject: [PATCH 013/170] ARM: bcm2835: Set Serial number and Revision
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0014-bcm2835-i2s-get-base-address-for-DMA-from-devicetree.patch

@@ -1,7 +1,7 @@
-From 5d6a70aac1ff4f0c898131100599340c1c3aba25 Mon Sep 17 00:00:00 2001
+From fb968a02c00e2722df2dcfec6f54b7524ff5a155 Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <hias@horus.com>
 Date: Sun, 11 Oct 2015 16:44:05 +0200
-Subject: [PATCH 014/156] bcm2835-i2s: get base address for DMA from devicetree
+Subject: [PATCH 014/170] bcm2835-i2s: get base address for DMA from devicetree
 
 Code copied from spi-bcm2835. Get physical address from devicetree
 instead of using hardcoded constant.

target/linux/brcm2708/patches-4.4/0015-bcm2835-i2s-add-24bit-support-update-bclk_ratio-to-m.patch

@@ -1,7 +1,7 @@
-From e7f330a7e837e0d6e31cb85dbaeace60ebd8cad1 Mon Sep 17 00:00:00 2001
+From abbe565abfe075b76e01b9671c6fc4cf42cc0328 Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <hias@horus.com>
 Date: Sun, 11 Oct 2015 15:21:16 +0200
-Subject: [PATCH 015/156] bcm2835-i2s: add 24bit support, update bclk_ratio to
+Subject: [PATCH 015/170] bcm2835-i2s: add 24bit support, update bclk_ratio to
  more correct values
 
 Code ported from bcm2708-i2s driver in Raspberry Pi tree.

target/linux/brcm2708/patches-4.4/0016-bcm2835-i2s-setup-clock-only-if-CPU-is-clock-master.patch

@@ -1,7 +1,7 @@
-From 19ed56e06d7b9342227ccf5942471d3c265a1685 Mon Sep 17 00:00:00 2001
+From b2cc62cd13099d6d2f21b9927df248aa3bdd8d5b Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <hias@horus.com>
 Date: Sun, 11 Oct 2015 15:25:51 +0200
-Subject: [PATCH 016/156] bcm2835-i2s: setup clock only if CPU is clock master
+Subject: [PATCH 016/170] bcm2835-i2s: setup clock only if CPU is clock master
 
 Code ported from bcm2708-i2s driver in Raspberry Pi tree.
 

target/linux/brcm2708/patches-4.4/0017-bcm2835-i2s-Eliminate-debugfs-directory-error.patch

@@ -1,7 +1,7 @@
-From cdc4ea613c38dc44e44dabba95b2eb594c22cd29 Mon Sep 17 00:00:00 2001
+From 71b2c93cd332be280b9ca7f293e463f30d5fb108 Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <hias@horus.com>
 Date: Sun, 11 Oct 2015 15:49:51 +0200
-Subject: [PATCH 017/156] bcm2835-i2s: Eliminate debugfs directory error
+Subject: [PATCH 017/170] bcm2835-i2s: Eliminate debugfs directory error
 
 Code ported from bcm2708-i2s driver in Raspberry Pi tree.
 

target/linux/brcm2708/patches-4.4/0018-bcm2835-i2s-Register-PCM-device.patch

@@ -1,7 +1,7 @@
-From f74c822d357e64c2da9d116a532bd581522efc06 Mon Sep 17 00:00:00 2001
+From fae43fcaa20df1d39c09c98372100bb1dedd6090 Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <hias@horus.com>
 Date: Sun, 11 Oct 2015 15:35:20 +0200
-Subject: [PATCH 018/156] bcm2835-i2s: Register PCM device
+Subject: [PATCH 018/170] bcm2835-i2s: Register PCM device
 
 Code ported from bcm2708-i2s driver in Raspberry Pi tree.
 

target/linux/brcm2708/patches-4.4/0019-bcm2835-i2s-Enable-MMAP-support-via-a-DT-property.patch

@@ -1,7 +1,7 @@
-From 72e07a497854cf8f63ffafc84e016ed859cb7d31 Mon Sep 17 00:00:00 2001
+From c9e2eeee4889f965a29744718bbff2de409ac649 Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <hias@horus.com>
 Date: Sun, 11 Oct 2015 15:55:21 +0200
-Subject: [PATCH 019/156] bcm2835-i2s: Enable MMAP support via a DT property
+Subject: [PATCH 019/170] bcm2835-i2s: Enable MMAP support via a DT property
 
 Code ported from bcm2708-i2s driver in Raspberry Pi tree.
 

target/linux/brcm2708/patches-4.4/0020-dmaengine-bcm2835-Add-slave-dma-support.patch

@@ -1,7 +1,7 @@
-From 79923137826ff02cad3536d7984626065f42ce6d Mon Sep 17 00:00:00 2001
+From dc5b926436bccc4efbb1695ec3696b5db6746d3b Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Thu, 9 Apr 2015 12:34:11 +0200
-Subject: [PATCH 020/156] dmaengine: bcm2835: Add slave dma support
+Subject: [PATCH 020/170] dmaengine: bcm2835: Add slave dma support
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0021-dmaengine-bcm2835-set-residue_granularity-field.patch

@@ -1,7 +1,7 @@
-From b6906312ccc7e18a0d8608c1d1bc318ab6f84656 Mon Sep 17 00:00:00 2001
+From 9c6955f3fbfbb46242c63b4640886b9a0d87910a Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Sat, 3 Oct 2015 15:58:59 +0200
-Subject: [PATCH 021/156] dmaengine: bcm2835: set residue_granularity field
+Subject: [PATCH 021/170] dmaengine: bcm2835: set residue_granularity field
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0022-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch

@@ -1,7 +1,7 @@
-From 53fcf558378cab445edc70a2a03a4ec7e1498107 Mon Sep 17 00:00:00 2001
+From 8da7ee8d9b714dbbac842fb5ae0471b52e0393ec Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Sat, 3 Oct 2015 22:22:55 +0200
-Subject: [PATCH 022/156] dmaengine: bcm2835: Load driver early and support
+Subject: [PATCH 022/170] dmaengine: bcm2835: Load driver early and support
  legacy API
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8

target/linux/brcm2708/patches-4.4/0023-bcm2835-dma-Fix-dreq-not-set-for-slave-transfers.patch

@@ -1,7 +1,7 @@
-From a8f6a0a5ad90dd940fffcd73311abb1aae8acfcc Mon Sep 17 00:00:00 2001
+From 0f3a30eb7ad7e709fdc6447c70bc3f1d5704eb63 Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <hias@horus.com>
 Date: Sat, 10 Oct 2015 12:29:18 +0200
-Subject: [PATCH 023/156] bcm2835-dma: Fix dreq not set for slave transfers
+Subject: [PATCH 023/170] bcm2835-dma: Fix dreq not set for slave transfers
 
 Set dreq to slave_id if it is not set like in bcm2708-dmaengine.
 ---

target/linux/brcm2708/patches-4.4/0024-bcm2835-dma-Limit-cyclic-transfers-on-lite-channels-.patch

@@ -1,7 +1,7 @@
-From 0ab04f220a909d20f991f3392d65aceb0ec7e774 Mon Sep 17 00:00:00 2001
+From 305370f7caaecafbabb77b630380dbc0c436bb4c Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <hias@horus.com>
 Date: Sun, 11 Oct 2015 12:28:30 +0200
-Subject: [PATCH 024/156] bcm2835-dma: Limit cyclic transfers on lite channels
+Subject: [PATCH 024/170] bcm2835-dma: Limit cyclic transfers on lite channels
  to 32k
 
 Transfers larger than 32k cause repeated clicking with I2S soundcards.

target/linux/brcm2708/patches-4.4/0025-bcm2835-Add-support-for-uart1.patch

@@ -1,7 +1,7 @@
-From 71b7745f15495d3f9fd59be9e5789c18581d60a0 Mon Sep 17 00:00:00 2001
+From d801c33b7e2fb0d02ac11b95ea92b7d692286ffc Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Sat, 15 Aug 2015 20:50:02 +0200
-Subject: [PATCH 025/156] bcm2835: Add support for uart1
+Subject: [PATCH 025/170] bcm2835: Add support for uart1
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0026-firmware-bcm2835-Add-missing-property-tags.patch

@@ -1,7 +1,7 @@
-From e289839705c709e9c4479566cef5605466f6a648 Mon Sep 17 00:00:00 2001
+From 5e90e32b539720ad8c6c8d7ec462378685924f22 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Fri, 26 Jun 2015 14:21:20 +0200
-Subject: [PATCH 026/156] firmware: bcm2835: Add missing property tags
+Subject: [PATCH 026/170] firmware: bcm2835: Add missing property tags
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0027-Main-bcm2708-bcm2709-linux-port.patch

@@ -1,7 +1,7 @@
-From e6b5eb84f3342be4dd3838279802b43521cd419f Mon Sep 17 00:00:00 2001
+From 894f124497e95c9af506af2ed7335857f2e71358 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Sun, 12 May 2013 12:24:19 +0100
-Subject: [PATCH 027/156] Main bcm2708/bcm2709 linux port
+Subject: [PATCH 027/170] Main bcm2708/bcm2709 linux port
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0028-squash-include-ARCH_BCM2708-ARCH_BCM2709.patch

@@ -1,7 +1,7 @@
-From eb50bdd77b032b204591287bd7b5881ab31162a3 Mon Sep 17 00:00:00 2001
+From 74b2c26348d94949561979a9a3ad61adcac74398 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 11 Nov 2015 21:01:15 +0000
-Subject: [PATCH 028/156] squash: include ARCH_BCM2708 / ARCH_BCM2709
+Subject: [PATCH 028/170] squash: include ARCH_BCM2708 / ARCH_BCM2709
 
 ---
  drivers/char/hw_random/Kconfig    |  2 +-

target/linux/brcm2708/patches-4.4/0029-Add-dwc_otg-driver.patch

@@ -1,7 +1,7 @@
-From 9a08cd1f14fd6e6797ddf99303175088bdb0ff90 Mon Sep 17 00:00:00 2001
+From a03df8d0f93365689c718f3d1fb62695e9fffe31 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 1 May 2013 19:46:17 +0100
-Subject: [PATCH 029/156] Add dwc_otg driver
+Subject: [PATCH 029/170] Add dwc_otg driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0030-bcm2708-framebuffer-driver.patch

@@ -1,7 +1,7 @@
-From 5722cc32ff8ec100e2f0490d4b94a257085871ff Mon Sep 17 00:00:00 2001
+From 845f985818d3d9ba162ab1102da78b0e39eaedba Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 17 Jun 2015 17:06:34 +0100
-Subject: [PATCH 030/156] bcm2708 framebuffer driver
+Subject: [PATCH 030/170] bcm2708 framebuffer driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0031-dmaengine-Add-support-for-BCM2708.patch

@@ -1,7 +1,7 @@
-From 04c9e1905ed9aae6208650d81c26baa142fc9e7c Mon Sep 17 00:00:00 2001
+From a35139d316b78606bfdeb0f10656ba6f1729c83f Mon Sep 17 00:00:00 2001
 From: Florian Meier <florian.meier@koalo.de>
 Date: Fri, 22 Nov 2013 14:22:53 +0100
-Subject: [PATCH 031/156] dmaengine: Add support for BCM2708
+Subject: [PATCH 031/170] dmaengine: Add support for BCM2708
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0032-Add-blk_pos-parameter-to-mmc-multi_io_quirk-callback.patch

@@ -1,7 +1,7 @@
-From 8883ad2926f389ee00f33ef52b1a8d7ecdad085f Mon Sep 17 00:00:00 2001
+From 462591cf98f15614620667e93b7f8bc0da6e86da Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Fri, 17 Apr 2015 19:30:22 +0100
-Subject: [PATCH 032/156] Add blk_pos parameter to mmc multi_io_quirk callback
+Subject: [PATCH 032/170] Add blk_pos parameter to mmc multi_io_quirk callback
 
 ---
  drivers/mmc/card/block.c          | 1 +

target/linux/brcm2708/patches-4.4/0033-MMC-added-alternative-MMC-driver.patch

@@ -1,7 +1,7 @@
-From 118e1dbbd1a750304eaf53ed97f05ee86e6f4d52 Mon Sep 17 00:00:00 2001
+From 3d0ca77d187abbbde572f4a73b1f864ffb8b5d8a Mon Sep 17 00:00:00 2001
 From: gellert <gellert@raspberrypi.org>
 Date: Fri, 15 Aug 2014 16:35:06 +0100
-Subject: [PATCH 033/156] MMC: added alternative MMC driver
+Subject: [PATCH 033/170] MMC: added alternative MMC driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0034-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch

@@ -1,7 +1,7 @@
-From d29928fd47f28cf8ee0221c4979da984203503a1 Mon Sep 17 00:00:00 2001
+From 756bf8b8f081be45e16d4d58d3fbe2ca073df298 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Wed, 25 Mar 2015 17:49:47 +0000
-Subject: [PATCH 034/156] Adding bcm2835-sdhost driver, and an overlay to
+Subject: [PATCH 034/170] Adding bcm2835-sdhost driver, and an overlay to
  enable it
 
 BCM2835 has two SD card interfaces. This driver uses the other one.

target/linux/brcm2708/patches-4.4/0035-cma-Add-vc_cma-driver-to-enable-use-of-CMA.patch

@@ -1,7 +1,7 @@
-From c6f15fd48c94d179e6e829cee2c36c2b4dc9a07d Mon Sep 17 00:00:00 2001
+From 8dbb0430386b772f636f474ed45496076d135428 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 3 Jul 2013 00:31:47 +0100
-Subject: [PATCH 035/156] cma: Add vc_cma driver to enable use of CMA
+Subject: [PATCH 035/170] cma: Add vc_cma driver to enable use of CMA
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0036-bcm2708-alsa-sound-driver.patch

@@ -1,7 +1,7 @@
-From 26d9897700046c008240842bafec44eed727df89 Mon Sep 17 00:00:00 2001
+From 1e8eb30b259278ea7ab9d14c66d2fab5f580f73c Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Mon, 26 Mar 2012 22:15:50 +0100
-Subject: [PATCH 036/156] bcm2708: alsa sound driver
+Subject: [PATCH 036/170] bcm2708: alsa sound driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0037-bcm2708-vchiq-driver.patch

@@ -1,7 +1,7 @@
-From ad0b56e0e4c45cbc6014f6befcb53ffc05dff857 Mon Sep 17 00:00:00 2001
+From 20c0f57db9cca65943519bd404b3e346958f4544 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Tue, 2 Jul 2013 23:42:01 +0100
-Subject: [PATCH 037/156] bcm2708 vchiq driver
+Subject: [PATCH 037/170] bcm2708 vchiq driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0038-vc_mem-Add-vc_mem-driver.patch

@@ -1,7 +1,7 @@
-From 431b30a19d76bc784aa609481c43121092b81f86 Mon Sep 17 00:00:00 2001
+From 2cabfc660c80dd79f24a8323b3913b5060ebf750 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 17 Jun 2015 16:07:06 +0100
-Subject: [PATCH 038/156] vc_mem: Add vc_mem driver
+Subject: [PATCH 038/170] vc_mem: Add vc_mem driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0039-vcsm-VideoCore-shared-memory-service-for-BCM2835.patch

@@ -1,7 +1,7 @@
-From d70f57c3da95fc54dfd702cb3d521cc3a9cc9850 Mon Sep 17 00:00:00 2001
+From 01574b9e0f1086399e7f796cc1dc8fcadabf4a46 Mon Sep 17 00:00:00 2001
 From: Tim Gover <tgover@broadcom.com>
 Date: Tue, 22 Jul 2014 15:41:04 +0100
-Subject: [PATCH 039/156] vcsm: VideoCore shared memory service for BCM2835
+Subject: [PATCH 039/170] vcsm: VideoCore shared memory service for BCM2835
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0040-Add-dev-gpiomem-device-for-rootless-user-GPIO-access.patch

@@ -1,7 +1,7 @@
-From a582dfc468cbb9176054bdcc02dce40a0e0441e6 Mon Sep 17 00:00:00 2001
+From 832077a0f61e44a9259b153f60eb233fa723c2a9 Mon Sep 17 00:00:00 2001
 From: Luke Wren <luke@raspberrypi.org>
 Date: Fri, 21 Aug 2015 23:14:48 +0100
-Subject: [PATCH 040/156] Add /dev/gpiomem device for rootless user GPIO access
+Subject: [PATCH 040/170] Add /dev/gpiomem device for rootless user GPIO access
 
 Signed-off-by: Luke Wren <luke@raspberrypi.org>
 

target/linux/brcm2708/patches-4.4/0041-Add-SMI-driver.patch

@@ -1,7 +1,7 @@
-From 7ccd5e32f6e98f1522a3e471e4afeef564497264 Mon Sep 17 00:00:00 2001
+From 6609b15c34f26f34b4b49e7726693a1de321078c Mon Sep 17 00:00:00 2001
 From: Luke Wren <wren6991@gmail.com>
 Date: Sat, 5 Sep 2015 01:14:45 +0100
-Subject: [PATCH 041/156] Add SMI driver
+Subject: [PATCH 041/170] Add SMI driver
 
 Signed-off-by: Luke Wren <wren6991@gmail.com>
 ---

target/linux/brcm2708/patches-4.4/0042-Add-SMI-NAND-driver.patch

@@ -1,7 +1,7 @@
-From 06301e219cb176ca2917ad7e51fc9cf9897cf52b Mon Sep 17 00:00:00 2001
+From f4d44b2c447c401791645627e88d0ef9830c1239 Mon Sep 17 00:00:00 2001
 From: Luke Wren <wren6991@gmail.com>
 Date: Sat, 5 Sep 2015 01:16:10 +0100
-Subject: [PATCH 042/156] Add SMI NAND driver
+Subject: [PATCH 042/170] Add SMI NAND driver
 
 Signed-off-by: Luke Wren <wren6991@gmail.com>
 ---

target/linux/brcm2708/patches-4.4/0043-lirc-added-support-for-RaspberryPi-GPIO.patch

@@ -1,7 +1,7 @@
-From 38d02987b33c187e2a02794c0b97c28d270f1d9b Mon Sep 17 00:00:00 2001
+From 2faad8f6644fa53418c5a7b80da8d5400b72df3f Mon Sep 17 00:00:00 2001
 From: Aron Szabo <aron@aron.ws>
 Date: Sat, 16 Jun 2012 12:15:55 +0200
-Subject: [PATCH 043/156] lirc: added support for RaspberryPi GPIO
+Subject: [PATCH 043/170] lirc: added support for RaspberryPi GPIO
 
 lirc_rpi: Use read_current_timer to determine transmitter delay. Thanks to jjmz and others
 See: https://github.com/raspberrypi/linux/issues/525

target/linux/brcm2708/patches-4.4/0044-Add-cpufreq-driver.patch

@@ -1,7 +1,7 @@
-From c2a1eecef94520be7c785cf6d23aca9c695122f5 Mon Sep 17 00:00:00 2001
+From 3c7ea37319a4974cbf6b89a84c109a53f4d6b408 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 3 Jul 2013 00:49:20 +0100
-Subject: [PATCH 044/156] Add cpufreq driver
+Subject: [PATCH 044/170] Add cpufreq driver
 
 Signed-off-by: popcornmix <popcornmix@gmail.com>
 ---

target/linux/brcm2708/patches-4.4/0045-Added-hwmon-thermal-driver-for-reporting-core-temper.patch

@@ -1,7 +1,7 @@
-From 76ad29cef7e6dc73d7f9c3cd3578783d1daefa6d Mon Sep 17 00:00:00 2001
+From 776e87ffc8b137ea465e7b0076e56cd71d9c56d1 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Tue, 26 Mar 2013 19:24:24 +0000
-Subject: [PATCH 045/156] Added hwmon/thermal driver for reporting core
+Subject: [PATCH 045/170] Added hwmon/thermal driver for reporting core
  temperature. Thanks Dorian
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8

target/linux/brcm2708/patches-4.4/0046-Add-Chris-Boot-s-i2c-driver.patch

@@ -1,7 +1,7 @@
-From aac476eac7be9830cbda14fe82afa7d4afbd41d2 Mon Sep 17 00:00:00 2001
+From 72181304010d3aa74cd2b98db592554a541ce4c2 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 17 Jun 2015 15:44:08 +0100
-Subject: [PATCH 046/156] Add Chris Boot's i2c driver
+Subject: [PATCH 046/170] Add Chris Boot's i2c driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0047-char-broadcom-Add-vcio-module.patch

@@ -1,7 +1,7 @@
-From 8e1245bf1c5553baec76ccb0deb521df84a3f48f Mon Sep 17 00:00:00 2001
+From abcf04d54ccb3d0897b1f7a95ddf9d9ccf63dc76 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Fri, 26 Jun 2015 14:27:06 +0200
-Subject: [PATCH 047/156] char: broadcom: Add vcio module
+Subject: [PATCH 047/170] char: broadcom: Add vcio module
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0048-firmware-bcm2835-Support-ARCH_BCM270x.patch

@@ -1,7 +1,7 @@
-From bf182799da48b6072c783fed452a752715b9b479 Mon Sep 17 00:00:00 2001
+From a205e934b63b6bf3f5f74bc39974ec6ff09df596 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Fri, 26 Jun 2015 14:25:01 +0200
-Subject: [PATCH 048/156] firmware: bcm2835: Support ARCH_BCM270x
+Subject: [PATCH 048/170] firmware: bcm2835: Support ARCH_BCM270x
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0049-bcm2835-add-v4l2-camera-device.patch

@@ -1,7 +1,7 @@
-From f4ccd72c0038efded59351ceb59dc0a1f227890c Mon Sep 17 00:00:00 2001
+From 4d74ee3d433df319ae3fc36bd16fd96b4bbff865 Mon Sep 17 00:00:00 2001
 From: Vincent Sanders <vincent.sanders@collabora.co.uk>
 Date: Wed, 30 Jan 2013 12:45:18 +0000
-Subject: [PATCH 049/156] bcm2835: add v4l2 camera device
+Subject: [PATCH 049/170] bcm2835: add v4l2 camera device
 
 - Supports raw YUV capture, preview, JPEG and H264.
 - Uses videobuf2 for data transfer, using dma_buf.

target/linux/brcm2708/patches-4.4/0050-scripts-Add-mkknlimg-and-knlinfo-scripts-from-tools-.patch

@@ -1,7 +1,7 @@
-From a98c2f7958c16abd5d1536f80c241ec83ee99b86 Mon Sep 17 00:00:00 2001
+From 03435989bbadbd333a810644c8246dd7eb0bad07 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Mon, 11 May 2015 09:00:42 +0100
-Subject: [PATCH 050/156] scripts: Add mkknlimg and knlinfo scripts from tools
+Subject: [PATCH 050/170] scripts: Add mkknlimg and knlinfo scripts from tools
  repo
 
 The Raspberry Pi firmware looks for a trailer on the kernel image to

target/linux/brcm2708/patches-4.4/0051-fdt-Add-support-for-the-CONFIG_CMDLINE_EXTEND-option.patch

@@ -1,7 +1,7 @@
-From eafa669fc02f9d7aa9d6fb0376558217d5d432e1 Mon Sep 17 00:00:00 2001
+From a251bf4a37d8fd468bc3ff853bcebe8ee452a31e Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Fri, 5 Dec 2014 17:26:26 +0000
-Subject: [PATCH 051/156] fdt: Add support for the CONFIG_CMDLINE_EXTEND option
+Subject: [PATCH 051/170] fdt: Add support for the CONFIG_CMDLINE_EXTEND option
 
 ---
  drivers/of/fdt.c | 29 ++++++++++++++++++++++++-----

target/linux/brcm2708/patches-4.4/0052-BCM2708-Add-core-Device-Tree-support.patch

@@ -1,7 +1,7 @@
-From 1bf87715f0e3eb28ca753ec6cc4d189e8bc0de66 Mon Sep 17 00:00:00 2001
+From 0112c4ce9db6cdc53af67dc7634966c3594de7ff Mon Sep 17 00:00:00 2001
 From: notro <notro@tronnes.org>
 Date: Wed, 9 Jul 2014 14:46:08 +0200
-Subject: [PATCH 052/156] BCM2708: Add core Device Tree support
+Subject: [PATCH 052/170] BCM2708: Add core Device Tree support
 
 Add the bare minimum needed to boot BCM2708 from a Device Tree.
 

target/linux/brcm2708/patches-4.4/0053-bcm2835-Match-with-BCM2708-Device-Trees.patch

@@ -1,7 +1,7 @@
-From 3ee2870ef7f0aa7c48a7cd1ae532aa9e1ac4f6ce Mon Sep 17 00:00:00 2001
+From 23eabf2220f0f748df3e88a35e55a82c53242b4a Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Sat, 15 Aug 2015 20:47:07 +0200
-Subject: [PATCH 053/156] bcm2835: Match with BCM2708 Device Trees
+Subject: [PATCH 053/170] bcm2835: Match with BCM2708 Device Trees
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0054-fbdev-add-FBIOCOPYAREA-ioctl.patch

@@ -1,7 +1,7 @@
-From 1d6ca03eff36dc3d5675554fb1cb4db6ebeb7e74 Mon Sep 17 00:00:00 2001
+From f978fb3b816681159b6cc97104954dea31488add Mon Sep 17 00:00:00 2001
 From: Siarhei Siamashka <siarhei.siamashka@gmail.com>
 Date: Mon, 17 Jun 2013 13:32:11 +0300
-Subject: [PATCH 054/156] fbdev: add FBIOCOPYAREA ioctl
+Subject: [PATCH 054/170] fbdev: add FBIOCOPYAREA ioctl
 
 Based on the patch authored by Ali Gholami Rudi at
     https://lkml.org/lkml/2009/7/13/153

target/linux/brcm2708/patches-4.4/0058-Speed-up-console-framebuffer-imageblit-function.patch

@@ -1,7 +1,7 @@
-From b070d3d1d6e0896607f3f4978c072cc33af62f80 Mon Sep 17 00:00:00 2001
+From 53bcd6e5a43a353508c7aff48abcdcaae1b35ca8 Mon Sep 17 00:00:00 2001
 From: Harm Hanemaaijer <fgenfb@yahoo.com>
 Date: Thu, 20 Jun 2013 20:21:39 +0200
-Subject: [PATCH 058/156] Speed up console framebuffer imageblit function
+Subject: [PATCH 058/170] Speed up console framebuffer imageblit function
 
 Especially on platforms with a slower CPU but a relatively high
 framebuffer fill bandwidth, like current ARM devices, the existing

target/linux/brcm2708/patches-4.4/0059-Allow-mac-address-to-be-set-in-smsc95xx.patch

@@ -1,7 +1,7 @@
-From 4a5e988e0730b19eaca3df7c279d9b38f69e9860 Mon Sep 17 00:00:00 2001
+From 6c0a9150827dc58fac38c8e787c050626325842e Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Tue, 26 Mar 2013 17:26:38 +0000
-Subject: [PATCH 059/156] Allow mac address to be set in smsc95xx
+Subject: [PATCH 059/170] Allow mac address to be set in smsc95xx
 
 Signed-off-by: popcornmix <popcornmix@gmail.com>
 ---

target/linux/brcm2708/patches-4.4/0060-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch

@@ -1,7 +1,7 @@
-From 4d386cf6aeac54f49224ac0b400cf58c6ba227d9 Mon Sep 17 00:00:00 2001
+From e172d31b8402f13aed5679cd7023f0c0935aab05 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 8 May 2013 11:46:50 +0100
-Subject: [PATCH 060/156] enabling the realtime clock 1-wire chip DS1307 and
+Subject: [PATCH 060/170] enabling the realtime clock 1-wire chip DS1307 and
  1-wire on GPIO4 (as a module)
 
 1-wire: Add support for configuring pin for w1-gpio kernel module

target/linux/brcm2708/patches-4.4/0061-Added-Device-IDs-for-August-DVB-T-205.patch

@@ -1,7 +1,7 @@
-From dbdc294a9b911c943d5214fefb5143e40dba056d Mon Sep 17 00:00:00 2001
+From 78c49b30c0dcc8b73f383f71b89719798fc89b72 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 3 Jul 2013 00:54:08 +0100
-Subject: [PATCH 061/156] Added Device IDs for August DVB-T 205
+Subject: [PATCH 061/170] Added Device IDs for August DVB-T 205
 
 ---
  drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 4 ++++

target/linux/brcm2708/patches-4.4/0062-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch

@@ -1,7 +1,7 @@
-From 3bbfaaf97f167d4f889c41822c4e767947fd1995 Mon Sep 17 00:00:00 2001
+From d0f48fe7aab3e4036fd55b491a9be94ea24f377d Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 18 Dec 2013 22:16:19 +0000
-Subject: [PATCH 062/156] config: Enable CONFIG_MEMCG, but leave it disabled
+Subject: [PATCH 062/170] config: Enable CONFIG_MEMCG, but leave it disabled
  (due to memory cost). Enable with cgroup_enable=memory.
 
 ---

target/linux/brcm2708/patches-4.4/0063-ASoC-Add-support-for-PCM5102A-codec.patch

@@ -1,7 +1,7 @@
-From 58218d451343867c4b18909c7c11cd348a6ce343 Mon Sep 17 00:00:00 2001
+From 8d35b3a72d3580ad6f5bc5835bfe13b00cce6086 Mon Sep 17 00:00:00 2001
 From: Florian Meier <florian.meier@koalo.de>
 Date: Fri, 22 Nov 2013 14:59:51 +0100
-Subject: [PATCH 063/156] ASoC: Add support for PCM5102A codec
+Subject: [PATCH 063/170] ASoC: Add support for PCM5102A codec
 
 Some definitions to support the PCM5102A codec
 by Texas Instruments.

target/linux/brcm2708/patches-4.4/0064-ASoC-Add-support-for-HifiBerry-DAC.patch

@@ -1,7 +1,7 @@
-From 062c5f7da781aac9e13c959e6b84359cc71e790e Mon Sep 17 00:00:00 2001
+From 9ced0e86593de2214ff8a81f71c802d7e7301b05 Mon Sep 17 00:00:00 2001
 From: Florian Meier <florian.meier@koalo.de>
 Date: Fri, 22 Nov 2013 19:19:08 +0100
-Subject: [PATCH 064/156] ASoC: Add support for HifiBerry DAC
+Subject: [PATCH 064/170] ASoC: Add support for HifiBerry DAC
 
 This adds a machine driver for the HifiBerry DAC.
 It is a sound card that can

target/linux/brcm2708/patches-4.4/0065-ASoC-Add-support-for-Rpi-DAC.patch

@@ -1,7 +1,7 @@
-From 698c90d19c77b07426d8b5825d7053b8ba5d8bc3 Mon Sep 17 00:00:00 2001
+From f16a654f57b024d44fe58d62b660e01de6a7811a Mon Sep 17 00:00:00 2001
 From: Florian Meier <florian.meier@koalo.de>
 Date: Fri, 22 Nov 2013 19:21:34 +0100
-Subject: [PATCH 065/156] ASoC: Add support for Rpi-DAC
+Subject: [PATCH 065/170] ASoC: Add support for Rpi-DAC
 
 ---
  sound/soc/bcm/Kconfig       |   7 +++

target/linux/brcm2708/patches-4.4/0066-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch

@@ -1,7 +1,7 @@
-From 41b19bff4474377f327d058488e1424ad74452e3 Mon Sep 17 00:00:00 2001
+From dbdeca565b0850da182d3bd0b3ed41f667ca8a45 Mon Sep 17 00:00:00 2001
 From: Daniel Matuschek <info@crazy-audio.com>
 Date: Wed, 15 Jan 2014 21:41:23 +0100
-Subject: [PATCH 066/156] ASoC: wm8804: Implement MCLK configuration options,
+Subject: [PATCH 066/170] ASoC: wm8804: Implement MCLK configuration options,
  add 32bit support WM8804 can run with PLL frequencies of 256xfs and 128xfs
  for most sample rates. At 192kHz only 128xfs is supported. The existing
  driver selects 128xfs automatically for some lower samples rates. By using an

target/linux/brcm2708/patches-4.4/0067-ASoC-BCM-Add-support-for-HiFiBerry-Digi.-Driver-is-b.patch

@@ -1,7 +1,7 @@
-From 7408f4b6cc7b535f9af624a5a7da7e8012448acd Mon Sep 17 00:00:00 2001
+From 0c2e64d3eda229c2f52ce6ed9d0b1c1572dd9b19 Mon Sep 17 00:00:00 2001
 From: Daniel Matuschek <info@crazy-audio.com>
 Date: Wed, 15 Jan 2014 21:42:08 +0100
-Subject: [PATCH 067/156] ASoC: BCM:Add support for HiFiBerry Digi. Driver is
+Subject: [PATCH 067/170] ASoC: BCM:Add support for HiFiBerry Digi. Driver is
  based on the patched WM8804 driver.
 
 Signed-off-by: Daniel Matuschek <daniel@matuschek.net>

target/linux/brcm2708/patches-4.4/0068-ASoC-wm8804-Set-idle_bias_off-to-false-Idle-bias-has.patch

@@ -1,7 +1,7 @@
-From b44c52875239b2e3ae992ca27212f71b8f77765f Mon Sep 17 00:00:00 2001
+From f2789622ff7c1297e28f38bb198f5fd24b4602ef Mon Sep 17 00:00:00 2001
 From: Daniel Matuschek <info@crazy-audio.com>
 Date: Thu, 16 Jan 2014 07:36:35 +0100
-Subject: [PATCH 068/156] ASoC: wm8804: Set idle_bias_off to false Idle bias
+Subject: [PATCH 068/170] ASoC: wm8804: Set idle_bias_off to false Idle bias
  has been change to remove warning on driver startup
 
 Signed-off-by: Daniel Matuschek <daniel@matuschek.net>

target/linux/brcm2708/patches-4.4/0069-Add-IQaudIO-Sound-Card-support-for-Raspberry-Pi.patch

@@ -1,7 +1,7 @@
-From 5c7f1224804dd5dc7d5dbcd208432261266f7595 Mon Sep 17 00:00:00 2001
+From 80fa31f923b4967bc86be20c5af780ef284fc972 Mon Sep 17 00:00:00 2001
 From: Gordon Garrity <gordon@iqaudio.com>
 Date: Sat, 8 Mar 2014 16:56:57 +0000
-Subject: [PATCH 069/156] Add IQaudIO Sound Card support for Raspberry Pi
+Subject: [PATCH 069/170] Add IQaudIO Sound Card support for Raspberry Pi
 
 Set a limit of 0dB on Digital Volume Control
 

target/linux/brcm2708/patches-4.4/0070-hid-Reduce-default-mouse-polling-interval-to-60Hz.patch

@@ -1,7 +1,7 @@
-From 6804db582a5c59d572eb0d4b5fb84204928e33bf Mon Sep 17 00:00:00 2001
+From b15f112ddaf2cd20a8f999ac823ddb51d7d513b9 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Mon, 14 Jul 2014 22:02:09 +0100
-Subject: [PATCH 070/156] hid: Reduce default mouse polling interval to 60Hz
+Subject: [PATCH 070/170] hid: Reduce default mouse polling interval to 60Hz
 
 Reduces overhead when using X
 ---

target/linux/brcm2708/patches-4.4/0071-Added-support-for-HiFiBerry-DAC.patch

@@ -1,7 +1,7 @@
-From cfa429e2830a4a720740098790f4a5fe8fca0486 Mon Sep 17 00:00:00 2001
+From debd3d30b1127328b5a1e444bd1550cb45c50362 Mon Sep 17 00:00:00 2001
 From: Daniel Matuschek <info@crazy-audio.com>
 Date: Mon, 4 Aug 2014 10:06:56 +0200
-Subject: [PATCH 071/156] Added support for HiFiBerry DAC+
+Subject: [PATCH 071/170] Added support for HiFiBerry DAC+
 
 The driver is based on the HiFiBerry DAC driver. However HiFiBerry DAC+ uses
 a different codec chip (PCM5122), therefore a new driver is necessary.

target/linux/brcm2708/patches-4.4/0072-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch

@@ -1,7 +1,7 @@
-From eb7a554225c0ac786a6795f330b8ccf7454b5ff8 Mon Sep 17 00:00:00 2001
+From 9c6f0b1812313d39afeefd700b7f9df9a82a47cd Mon Sep 17 00:00:00 2001
 From: Daniel Matuschek <info@crazy-audio.com>
 Date: Mon, 4 Aug 2014 11:09:58 +0200
-Subject: [PATCH 072/156] Added driver for HiFiBerry Amp amplifier add-on board
+Subject: [PATCH 072/170] Added driver for HiFiBerry Amp amplifier add-on board
 
 The driver contains a low-level hardware driver for the TAS5713 and the
 drivers for the Raspberry Pi I2S subsystem.

target/linux/brcm2708/patches-4.4/0073-Update-ds1307-driver-for-device-tree-support.patch

@@ -1,7 +1,7 @@
-From 0944a852d7cc31e1112559b6f6bc2d81724c96a3 Mon Sep 17 00:00:00 2001
+From 21d08f232ffc350b2930f761f3da26f9867b1d4d Mon Sep 17 00:00:00 2001
 From: Ryan Coe <bluemrp9@gmail.com>
 Date: Sat, 31 Jan 2015 18:25:49 -0700
-Subject: [PATCH 073/156] Update ds1307 driver for device-tree support
+Subject: [PATCH 073/170] Update ds1307 driver for device-tree support
 
 Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
 ---

target/linux/brcm2708/patches-4.4/0074-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch

@@ -1,7 +1,7 @@
-From 70cae40081cad507c562148d047afe05334675ad Mon Sep 17 00:00:00 2001
+From a2b52a3af1314e2b691d9518afb3051193758671 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Fri, 6 Feb 2015 13:50:57 +0000
-Subject: [PATCH 074/156] BCM270x_DT: Add pwr_led, and the required "input"
+Subject: [PATCH 074/170] BCM270x_DT: Add pwr_led, and the required "input"
  trigger
 
 The "input" trigger makes the associated GPIO an input.  This is to support

target/linux/brcm2708/patches-4.4/0075-enc28j60-Add-device-tree-compatible-string-and-an-ov.patch

@@ -1,7 +1,7 @@
-From e697bb5943f0c2c51bedc7b194059ea4da1e26f7 Mon Sep 17 00:00:00 2001
+From 12ad9b7c670220b1b8b80ebf507651d106cb28c0 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Fri, 27 Feb 2015 15:10:24 +0000
-Subject: [PATCH 075/156] enc28j60: Add device tree compatible string and an
+Subject: [PATCH 075/170] enc28j60: Add device tree compatible string and an
  overlay
 
 ---

target/linux/brcm2708/patches-4.4/0076-Add-driver-for-rpi-proto.patch

@@ -1,7 +1,7 @@
-From 8a8d68121ff5145452a0645123119847ddba9396 Mon Sep 17 00:00:00 2001
+From 660d2fba0483aafc4a1ce678016620c0871bb759 Mon Sep 17 00:00:00 2001
 From: Waldemar Brodkorb <wbrodkorb@conet.de>
 Date: Wed, 25 Mar 2015 09:26:17 +0100
-Subject: [PATCH 076/156] Add driver for rpi-proto
+Subject: [PATCH 076/170] Add driver for rpi-proto
 
 Forward port of 3.10.x driver from https://github.com/koalo
 We are using a custom board and would like to use rpi 3.18.x

target/linux/brcm2708/patches-4.4/0077-config-Add-default-configs.patch

@@ -1,7 +1,7 @@
-From adc027efa7b5703f0d452fff7a821570776da786 Mon Sep 17 00:00:00 2001
+From e2af169e60b4ebd710e733996d57ad86264bae27 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Mon, 13 Apr 2015 17:16:29 +0100
-Subject: [PATCH 077/156] config: Add default configs
+Subject: [PATCH 077/170] config: Add default configs
 
 ---
  arch/arm/configs/bcm2709_defconfig | 1254 +++++++++++++++++++++++++++++++++++

target/linux/brcm2708/patches-4.4/0078-bcm2835-bcm2835_defconfig.patch

@@ -1,7 +1,7 @@
-From d36556c5965dacf7335068a3c4af4613be6268ed Mon Sep 17 00:00:00 2001
+From e5292198fc83805a9f4751fddeb802f69c0270f0 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Wed, 29 Apr 2015 17:24:02 +0200
-Subject: [PATCH 078/156] bcm2835: bcm2835_defconfig
+Subject: [PATCH 078/170] bcm2835: bcm2835_defconfig
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0079-rpi-ft5406-Add-touchscreen-driver-for-pi-LCD-display.patch

@@ -1,7 +1,7 @@
-From 3a15b5f0db3f90c4534a01a8631d1d0be94e3957 Mon Sep 17 00:00:00 2001
+From 6fb12ee15eb9b0f5b6fea66c861a9db8ec6671ed Mon Sep 17 00:00:00 2001
 From: Gordon Hollingworth <gordon@raspberrypi.org>
 Date: Tue, 12 May 2015 14:47:56 +0100
-Subject: [PATCH 079/156] rpi-ft5406: Add touchscreen driver for pi LCD display
+Subject: [PATCH 079/170] rpi-ft5406: Add touchscreen driver for pi LCD display
 
 Fix driver detection failure Check that the buffer response is non-zero meaning the touchscreen was detected
 

target/linux/brcm2708/patches-4.4/0080-Improve-__copy_to_user-and-__copy_from_user-performa.patch

@@ -1,7 +1,7 @@
-From 2195d7057b15258644aa186dc4784757dfc2291a Mon Sep 17 00:00:00 2001
+From b57a6269e03fe055f78ab50add6e2c68d43254e2 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Mon, 13 Oct 2014 11:47:53 +0100
-Subject: [PATCH 080/156] Improve __copy_to_user and __copy_from_user
+Subject: [PATCH 080/170] Improve __copy_to_user and __copy_from_user
  performance
 
 Provide a __copy_from_user that uses memcpy. On BCM2708, use

target/linux/brcm2708/patches-4.4/0081-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch

@@ -1,7 +1,7 @@
-From 4a8b44e4db451f80235221dd558d95aface19148 Mon Sep 17 00:00:00 2001
+From 44d43099a94c8b2db818c80c67789ef5f9857b81 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Thu, 25 Jun 2015 12:16:11 +0100
-Subject: [PATCH 081/156] gpio-poweroff: Allow it to work on Raspberry Pi
+Subject: [PATCH 081/170] gpio-poweroff: Allow it to work on Raspberry Pi
 
 The Raspberry Pi firmware manages the power-down and reboot
 process. To do this it installs a pm_power_off handler, causing

target/linux/brcm2708/patches-4.4/0082-spidev-Add-spidev-compatible-string-to-silence-warni.patch

@@ -1,7 +1,7 @@
-From 1aae6581fac6cf69e0772d13338b44c90eeab969 Mon Sep 17 00:00:00 2001
+From 5b2d8bca046bd6f1a426e9205f194ece5b95e300 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Tue, 14 Jul 2015 10:26:09 +0100
-Subject: [PATCH 082/156] spidev: Add "spidev" compatible string to silence
+Subject: [PATCH 082/170] spidev: Add "spidev" compatible string to silence
  warning
 
 See: https://github.com/raspberrypi/linux/issues/1054

target/linux/brcm2708/patches-4.4/0083-scripts-dtc-Add-overlay-support.patch

@@ -1,7 +1,7 @@
-From 1f1e162b80815e9cb308c14ad4425a314686a813 Mon Sep 17 00:00:00 2001
+From 534c337ea28bee34f886a1d1e00d281365c94efa Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Tue, 14 Jul 2015 17:00:18 +0100
-Subject: [PATCH 083/156] scripts/dtc: Add overlay support
+Subject: [PATCH 083/170] scripts/dtc: Add overlay support
 
 ---
  scripts/dtc/checks.c                 |  119 ++-

target/linux/brcm2708/patches-4.4/0084-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch

@@ -1,7 +1,7 @@
-From b3ca8734955b9bbf611e58444f7e4ab239f5c54a Mon Sep 17 00:00:00 2001
+From b065c580329ecb7c7e77bb7019c6059d7db83398 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <pelwell@users.noreply.github.com>
 Date: Tue, 14 Jul 2015 14:32:47 +0100
-Subject: [PATCH 084/156] mfd: Add Raspberry Pi Sense HAT core driver
+Subject: [PATCH 084/170] mfd: Add Raspberry Pi Sense HAT core driver
 
 ---
  drivers/input/joystick/Kconfig           |   8 +

target/linux/brcm2708/patches-4.4/0085-RaspiDAC3-support.patch

@@ -1,7 +1,7 @@
-From 305847dcc80fa3e3ffccd0e6c77b45d0a54ed185 Mon Sep 17 00:00:00 2001
+From c86a74aaff9bc42b3cb04881b3aaf7f822edda04 Mon Sep 17 00:00:00 2001
 From: Jan Grulich <jan@grulich.eu>
 Date: Mon, 24 Aug 2015 16:03:47 +0100
-Subject: [PATCH 085/156] RaspiDAC3 support
+Subject: [PATCH 085/170] RaspiDAC3 support
 
 Signed-off-by: Jan Grulich <jan@grulich.eu>
 

target/linux/brcm2708/patches-4.4/0086-tpa6130a2-Add-headphone-switch-control.patch

@@ -1,7 +1,7 @@
-From 1f384a47d40c8f7112d6ea3b9b20442a089f63bb Mon Sep 17 00:00:00 2001
+From 2d340e2fbbc9f4735b798601a43ae9f0f4cc5742 Mon Sep 17 00:00:00 2001
 From: Jan Grulich <jan@grulich.eu>
 Date: Mon, 24 Aug 2015 16:02:34 +0100
-Subject: [PATCH 086/156] tpa6130a2: Add headphone switch control
+Subject: [PATCH 086/170] tpa6130a2: Add headphone switch control
 
 Signed-off-by: Jan Grulich <jan@grulich.eu>
 ---

target/linux/brcm2708/patches-4.4/0087-irq-bcm2835-Fix-building-with-2708.patch

@@ -1,7 +1,7 @@
-From e14cfb794033608cb17a1537d5cceaeb3842c41a Mon Sep 17 00:00:00 2001
+From 6fc9d40bec5dbcf3ae8b52ab6850ed0b18193c82 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Mon, 28 Sep 2015 23:38:59 +0100
-Subject: [PATCH 087/156] irq-bcm2835: Fix building with 2708
+Subject: [PATCH 087/170] irq-bcm2835: Fix building with 2708
 
 ---
  drivers/irqchip/irq-bcm2835.c | 3 ++-

target/linux/brcm2708/patches-4.4/0088-rpi_display-add-backlight-driver-and-overlay.patch

@@ -1,7 +1,7 @@
-From e6699e6b06d539e29869d751f1cb666192d045c0 Mon Sep 17 00:00:00 2001
+From 0e7ec1e61b149567d5af63169cd4d701c133356f Mon Sep 17 00:00:00 2001
 From: P33M <P33M@github.com>
 Date: Wed, 21 Oct 2015 14:55:21 +0100
-Subject: [PATCH 088/156] rpi_display: add backlight driver and overlay
+Subject: [PATCH 088/170] rpi_display: add backlight driver and overlay
 
 Add a mailbox-driven backlight controller for the Raspberry Pi DSI
 touchscreen display. Requires updated GPU firmware to recognise the

target/linux/brcm2708/patches-4.4/0089-bcm2835-dma-Fix-up-convert-to-DMA-pool.patch

@@ -1,7 +1,7 @@
-From 66bd6f87c5477a16d94c8cf8879919632508813f Mon Sep 17 00:00:00 2001
+From 0459ca97c1f2753ce805ab58ff17847cb4c142e0 Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <hias@horus.com>
 Date: Mon, 16 Nov 2015 14:05:35 +0000
-Subject: [PATCH 089/156] bcm2835-dma: Fix up convert to DMA pool
+Subject: [PATCH 089/170] bcm2835-dma: Fix up convert to DMA pool
 
 ---
  drivers/dma/bcm2835-dma.c | 36 ++++++++++++++++++++++++++----------

target/linux/brcm2708/patches-4.4/0090-scripts-Multi-platform-support-for-mkknlimg-and-knli.patch

@@ -1,7 +1,7 @@
-From 6e5a9e29f92463a7c3e0230f8c8ea9001bda2bff Mon Sep 17 00:00:00 2001
+From f6dd60426dc7970ef4e9e3d9e00d374f80a6abd2 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Wed, 11 Nov 2015 11:38:59 +0000
-Subject: [PATCH 090/156] scripts: Multi-platform support for mkknlimg and
+Subject: [PATCH 090/170] scripts: Multi-platform support for mkknlimg and
  knlinfo
 
 The firmware uses tags in the kernel trailer to choose which dtb file

target/linux/brcm2708/patches-4.4/0091-drm-vc4-Add-suport-for-3D-rendering-using-the-V3D-en.patch

@@ -1,7 +1,7 @@
-From 9fcd3d8e07364a62bc57770f54a2e1b0b232bb17 Mon Sep 17 00:00:00 2001
+From 6d38553e5ce7fb70dd1f89665caf58064a7e97d7 Mon Sep 17 00:00:00 2001
 From: Eric Anholt <eric@anholt.net>
 Date: Mon, 2 Mar 2015 13:01:12 -0800
-Subject: [PATCH 091/156] drm/vc4: Add suport for 3D rendering using the V3D
+Subject: [PATCH 091/170] drm/vc4: Add suport for 3D rendering using the V3D
  engine.
 
 This is a squash of the out-of-tree development series.  Since that

target/linux/brcm2708/patches-4.4/0092-drm-vc4-Force-HDMI-to-connected.patch

@@ -1,7 +1,7 @@
-From 4fae622e03263fa61e1d56ba13ea8d8802d5e64f Mon Sep 17 00:00:00 2001
+From aa579c7485e1bae681c50b223e89cd658dd0b2c1 Mon Sep 17 00:00:00 2001
 From: Eric Anholt <eric@anholt.net>
 Date: Wed, 14 Oct 2015 11:32:14 -0700
-Subject: [PATCH 092/156] drm/vc4: Force HDMI to connected.
+Subject: [PATCH 092/170] drm/vc4: Force HDMI to connected.
 
 For some reason on the downstream tree, the HPD GPIO isn't working.
 

target/linux/brcm2708/patches-4.4/0093-drm-vc4-bo-cache-locking-fixes.patch

@@ -1,7 +1,7 @@
-From ca6e3e079d54eae4839bd5d4cf16ed504be66d96 Mon Sep 17 00:00:00 2001
+From edb828d91374e8fa4f05d68be008c40d4f9a158d Mon Sep 17 00:00:00 2001
 From: Eric Anholt <eric@anholt.net>
 Date: Mon, 19 Oct 2015 08:23:18 -0700
-Subject: [PATCH 093/156] drm/vc4: bo cache locking fixes.
+Subject: [PATCH 093/170] drm/vc4: bo cache locking fixes.
 
 Signed-off-by: Eric Anholt <eric@anholt.net>
 ---

target/linux/brcm2708/patches-4.4/0094-drm-vc4-bo-cache-locking-cleanup.patch

@@ -1,7 +1,7 @@
-From 05987e4b471d4408e11e218886015bbd09b13edf Mon Sep 17 00:00:00 2001
+From eafd7a031a15fb0d51a86b89e42ccde4f23434b4 Mon Sep 17 00:00:00 2001
 From: Eric Anholt <eric@anholt.net>
 Date: Mon, 19 Oct 2015 08:29:41 -0700
-Subject: [PATCH 094/156] drm/vc4: bo cache locking cleanup.
+Subject: [PATCH 094/170] drm/vc4: bo cache locking cleanup.
 
 Signed-off-by: Eric Anholt <eric@anholt.net>
 ---

target/linux/brcm2708/patches-4.4/0095-drm-vc4-Use-job_lock-to-protect-seqno_cb_list.patch

@@ -1,7 +1,7 @@
-From 72d3af528b1ac1e2606d252d49f3f50281976f5c Mon Sep 17 00:00:00 2001
+From 482f2b3e97e919ac0ebc55a6040747495563b9a7 Mon Sep 17 00:00:00 2001
 From: Eric Anholt <eric@anholt.net>
 Date: Mon, 19 Oct 2015 08:32:24 -0700
-Subject: [PATCH 095/156] drm/vc4: Use job_lock to protect seqno_cb_list.
+Subject: [PATCH 095/170] drm/vc4: Use job_lock to protect seqno_cb_list.
 
 We're (mostly) not supposed to be using struct_mutex in drivers these
 days.

target/linux/brcm2708/patches-4.4/0096-drm-vc4-Drop-struct_mutex-around-CL-validation.patch

@@ -1,7 +1,7 @@
-From 1eba33023a05b04c591b212fbd5d3f19115c49b3 Mon Sep 17 00:00:00 2001
+From 4dc15a296586679d5b014011e44a093cf962123e Mon Sep 17 00:00:00 2001
 From: Eric Anholt <eric@anholt.net>
 Date: Mon, 19 Oct 2015 08:44:35 -0700
-Subject: [PATCH 096/156] drm/vc4: Drop struct_mutex around CL validation.
+Subject: [PATCH 096/170] drm/vc4: Drop struct_mutex around CL validation.
 
 We were using it so that we could make sure that shader validation
 state didn't change while we were validating, but now shader

target/linux/brcm2708/patches-4.4/0097-drm-vc4-Drop-struct_mutex-around-CL-validation.patch

@@ -1,7 +1,7 @@
-From ec1275865fd40eff9420aa4475da0a09a065e381 Mon Sep 17 00:00:00 2001
+From f1924e632d16f98eee1fe1be636249b8cee4ee6e Mon Sep 17 00:00:00 2001
 From: Eric Anholt <eric@anholt.net>
 Date: Mon, 19 Oct 2015 08:44:35 -0700
-Subject: [PATCH 097/156] drm/vc4: Drop struct_mutex around CL validation.
+Subject: [PATCH 097/170] drm/vc4: Drop struct_mutex around CL validation.
 
 We were using it so that we could make sure that shader validation
 state didn't change while we were validating, but now shader

target/linux/brcm2708/patches-4.4/0098-drm-vc4-Add-support-for-more-display-plane-formats.patch

@@ -1,7 +1,7 @@
-From 605806b44e12f9e9a88bfab65b5af00c2319edef Mon Sep 17 00:00:00 2001
+From 0193a1e5b931c7363279282b4169c2152af1a621 Mon Sep 17 00:00:00 2001
 From: Eric Anholt <eric@anholt.net>
 Date: Tue, 20 Oct 2015 13:59:15 +0100
-Subject: [PATCH 098/156] drm/vc4: Add support for more display plane formats.
+Subject: [PATCH 098/170] drm/vc4: Add support for more display plane formats.
 
 Signed-off-by: Eric Anholt <eric@anholt.net>
 ---

target/linux/brcm2708/patches-4.4/0099-drm-vc4-No-need-to-stop-the-stopped-threads.patch

@@ -1,7 +1,7 @@
-From 97a02955d447e975998b6e57febd7c304cac4ab1 Mon Sep 17 00:00:00 2001
+From 8faa3b83201819d56f997a2b2ecaf8c690080852 Mon Sep 17 00:00:00 2001
 From: Eric Anholt <eric@anholt.net>
 Date: Fri, 23 Oct 2015 12:31:56 +0100
-Subject: [PATCH 099/156] drm/vc4: No need to stop the stopped threads.
+Subject: [PATCH 099/170] drm/vc4: No need to stop the stopped threads.
 
 This was leftover debug code from the hackdriver.  We never submit
 unless the thread is already idle.

target/linux/brcm2708/patches-4.4/0100-drm-vc4-Remove-extra-barrier-s-aroudn-CTnCA-CTnEA-se.patch

@@ -1,7 +1,7 @@
-From 5a0dd0a09aab3f1f82c70ec298d86c794ee65097 Mon Sep 17 00:00:00 2001
+From d102d0e145b58bccbea52e89bbe52dcefc044aaa Mon Sep 17 00:00:00 2001
 From: Eric Anholt <eric@anholt.net>
 Date: Fri, 23 Oct 2015 12:33:43 +0100
-Subject: [PATCH 100/156] drm/vc4: Remove extra barrier()s aroudn CTnCA/CTnEA
+Subject: [PATCH 100/170] drm/vc4: Remove extra barrier()s aroudn CTnCA/CTnEA
  setup.
 
 The writel() that these expand to already does barriers.