hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

sunxi: remove 3.13 support 

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42628
lede-17.01
Zoltan Herpai 2014-09-21 15:42:36 +00:00
parent c54e245b3f
commit cc60fad010
172 changed files with 0 additions and 20084 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

430
target/linux/sunxi/config-3.13
View File

@ -1,430 +0,0 @@
CONFIG_AHCI_SUNXI=y
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_ARCH_NR_GPIO=288
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARM=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_ARM_CPU_SUSPEND is not set
CONFIG_ARM_ERRATA_430973=y
CONFIG_ARM_ERRATA_720789=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_ARM_ERRATA_775420=y
CONFIG_ARM_GIC=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
# CONFIG_ARM_LPAE is not set
CONFIG_ARM_NR_BANKS=8
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_ARM_PSCI=y
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_ARM_VIRT_EXT=y
CONFIG_ATA=y
CONFIG_ATAGS=y
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_AVERAGE=y
CONFIG_BCH=y
CONFIG_BINFMT_MISC=y
CONFIG_BLK_CGROUP=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_BOUNCE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_SCHED is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2"
CONFIG_CMDLINE_FORCE=y
CONFIG_COMMON_CLK=y
CONFIG_COMPACTION=y
CONFIG_CONFIGFS_FS=y
CONFIG_CONNECTOR=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_COREDUMP=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_CPUSETS=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_HAS_ASID=y
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_RMAP=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_V7=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_UART_8250 is not set
# CONFIG_DEBUG_UART_PL01X is not set
# CONFIG_DEBUG_USER is not set
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_DIRECT_IO=y
CONFIG_DMADEVICES=y
CONFIG_DMA_OF=y
CONFIG_DNOTIFY=y
CONFIG_DTC=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DWMAC_SUNXI=y
# CONFIG_DW_DMAC_CORE is not set
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_EEPROM_SUNXI_SID is not set
CONFIG_ELF_CORE=y
# CONFIG_EMBEDDED is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_EXPERT is not set
CONFIG_EXT4_FS=y
CONFIG_FRAME_POINTER=y
CONFIG_FRAME_WARN=2048
CONFIG_FREEZER=y
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
CONFIG_GARP=y
CONFIG_GENERIC_ACL=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
# CONFIG_HAMRADIO is not set
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_BPF_JIT=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SMP=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HW_CONSOLE=y
CONFIG_HZ_FIXED=0
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_MUX=y
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_MV64XXX=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_INPUT=y
# CONFIG_INPUT_MISC is not set
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_IOSCHED_CFQ=y
CONFIG_IPC_NS=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_BOOTP is not set
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_RARP is not set
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_KALLSYMS=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_KEYBOARD_SUN4I_LRADC=y
CONFIG_KSM=y
CONFIG_KTIME_SCALAR=y
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LOG_BUF_SHIFT=19
CONFIG_LZ4_DECOMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MDIO_SUN4I=y
# CONFIG_MEMCG is not set
CONFIG_MIGRATION=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_SUNXI=y
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NAMESPACES=y
CONFIG_NEED_DMA_MAP_STATE=y
# CONFIG_NEON is not set
# CONFIG_NETPRIO_CGROUP is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_NS=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_NET_VENDOR_ALLWINNER=y
CONFIG_NLS=y
CONFIG_NO_HZ=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NR_CPUS=4
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PARTITION_ADVANCED is not set
# CONFIG_PCI_SYSCALL is not set
CONFIG_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PID_NS=y
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINCTRL_SUNXI=y
CONFIG_PM=y
CONFIG_PM_CLK=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_RUNTIME=y
CONFIG_POWER_SUPPLY=y
CONFIG_PPS=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_RCU=y
CONFIG_PRINTK_TIME=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_PROC_DEVICETREE=y
CONFIG_PROC_EVENTS=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_PTP_1588_CLOCK=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTA=y
CONFIG_QUOTACTL=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_RCU_BOOST is not set
CONFIG_RCU_CPU_STALL_VERBOSE=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RD_BZIP2=y
CONFIG_RD_GZIP=y
CONFIG_RD_LZ4=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_RD_XZ=y
CONFIG_REGMAP=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_RELAY=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_RFKILL_REGULATOR is not set
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SCHED_HRTICK=y
CONFIG_SCSI=y
CONFIG_SECURITYFS=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_RUNTIME_UARTS=8
CONFIG_SERIAL_8250_SYSRQ=y
CONFIG_SERIO=y
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_SUN4I=y
# CONFIG_SPI_SUN6I is not set
# CONFIG_STAGING is not set
# CONFIG_STMMAC_DA is not set
# CONFIG_STMMAC_DEBUG_FS is not set
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_STOP_MACHINE=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_SUN4I_EMAC is not set
CONFIG_SUN4I_TIMER=y
CONFIG_SUN5I_HSTIMER=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_SWIOTLB=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_TASK_XACCT=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_THUMB2_KERNEL is not set
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TOUCHSCREEN_SUN4I=y
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_UID16=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_COMMON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_SUPPORT=y
# CONFIG_USER_NS is not set
CONFIG_USE_OF=y
CONFIG_UTS_NS=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_XEN is not set
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XPS=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ZBOOT_ROM_TEXT=0
# CONFIG_ZBUD is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZONE_DMA_FLAG=0

70
target/linux/sunxi/patches-3.13/100-clk-composite-determine-rate.patch
View File

@ -1,70 +0,0 @@
From a968e9dc5983d258a4aa7e496d58c92e9e4cf670 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Sat, 14 Sep 2013 21:37:59 -0300
Subject: [PATCH] clk: composite: .determine_rate support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This commit adds .determine_rate support to the composite clock. It will
use the .determine_rate callback from the rate component if available,
and fall back on the mux component otherwise. This allows composite
clocks to enjoy the benefits of automatic clock reparenting.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/clk-composite.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
--- a/drivers/clk/clk-composite.c
+++ b/drivers/clk/clk-composite.c
@@ -55,6 +55,30 @@ static unsigned long clk_composite_recal
return rate_ops->recalc_rate(rate_hw, parent_rate);
}
+static long clk_composite_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_p)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *rate_ops = composite->rate_ops;
+ const struct clk_ops *mux_ops = composite->mux_ops;
+ struct clk_hw *rate_hw = composite->rate_hw;
+ struct clk_hw *mux_hw = composite->mux_hw;
+
+ if (rate_hw && rate_ops && rate_ops->determine_rate) {
+ rate_hw->clk = hw->clk;
+ return rate_ops->determine_rate(rate_hw, rate, best_parent_rate,
+ best_parent_p);
+ } else if (mux_hw && mux_ops && mux_ops->determine_rate) {
+ mux_hw->clk = hw->clk;
+ return mux_ops->determine_rate(rate_hw, rate, best_parent_rate,
+ best_parent_p);
+ } else {
+ pr_err("clk: clk_composite_determine_rate function called, but no mux or rate callback set!\n");
+ return 0;
+ }
+}
+
static long clk_composite_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
@@ -147,6 +171,8 @@ struct clk *clk_register_composite(struc
composite->mux_ops = mux_ops;
clk_composite_ops->get_parent = clk_composite_get_parent;
clk_composite_ops->set_parent = clk_composite_set_parent;
+ if (mux_ops->determine_rate)
+ clk_composite_ops->determine_rate = clk_composite_determine_rate;
}
if (rate_hw && rate_ops) {
@@ -170,6 +196,8 @@ struct clk *clk_register_composite(struc
composite->rate_hw = rate_hw;
composite->rate_ops = rate_ops;
clk_composite_ops->recalc_rate = clk_composite_recalc_rate;
+ if (rate_ops->determine_rate)
+ clk_composite_ops->determine_rate = clk_composite_determine_rate;
}
if (gate_hw && gate_ops) {

29
target/linux/sunxi/patches-3.13/101-fix-off-by-one-masks.patch
View File

@ -1,29 +0,0 @@
From b3cb099f8b0cbe56fcfbb4fb9c7cce48afff41f0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Fri, 20 Sep 2013 22:03:10 -0300
Subject: [PATCH] clk: sunxi: factors: fix off-by-one masks
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The previous code would generate one bit too long masks, and was
needlessly complicated. This patch replaces it by simpler code that can
generate the masks correctly.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/sunxi/clk-factors.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/clk/sunxi/clk-factors.c
+++ b/drivers/clk/sunxi/clk-factors.c
@@ -40,7 +40,7 @@ struct clk_factors {
#define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
-#define SETMASK(len, pos) (((-1U) >> (31-len)) << (pos))
+#define SETMASK(len, pos) (((1U << (len)) - 1) << (pos))
#define CLRMASK(len, pos) (~(SETMASK(len, pos)))
#define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit))

27
target/linux/sunxi/patches-3.13/102-clk-factors-clear-vars.patch
View File

@ -1,27 +0,0 @@
From 789bea92aba0256a7f5309992327df8729333750 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Fri, 20 Sep 2013 22:03:11 -0300
Subject: [PATCH] clk: sunxi: factors: clear variables before using them
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Random bits may get into our factors if we don't clear n, k, m and p.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/sunxi/clk-factors.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/clk/sunxi/clk-factors.c
+++ b/drivers/clk/sunxi/clk-factors.c
@@ -88,7 +88,7 @@ static long clk_factors_round_rate(struc
static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
- u8 n, k, m, p;
+ u8 n = 0, k = 0, m = 0, p = 0;
u32 reg;
struct clk_factors *factors = to_clk_factors(hw);
struct clk_factors_config *config = factors->config;

66
target/linux/sunxi/patches-3.13/103-sunxi-clk-core-clock-protect.patch
View File

@ -1,66 +0,0 @@
From 7df19a0adca7806e081479eecb07365652c26ef5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Fri, 20 Sep 2013 22:03:12 -0300
Subject: [PATCH] clk: sunxi: protect core clocks from accidental shutdown
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Some important clocks may get disabled as a side effect of another clock
being disabled, because they have no consumers. This patch implements a
mechanism so those clocks can be claimed by the driver and therefore
remain enabled at all times.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Conflicts:
drivers/clk/sunxi/clk-sunxi.c
---
drivers/clk/sunxi/clk-sunxi.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -616,6 +616,31 @@ static void __init of_sunxi_table_clock_
}
}
+/**
+ * System clock protection
+ *
+ * By enabling these critical clocks, we prevent their accidental gating
+ * by the framework
+ */
+static void __init sunxi_clock_protect(void)
+{
+ struct clk *clk;
+
+ /* memory bus clock - sun5i+ */
+ clk = clk_get(NULL, "mbus");
+ if (!IS_ERR(clk)) {
+ clk_prepare_enable(clk);
+ clk_put(clk);
+ }
+
+ /* DDR clock - sun4i+ */
+ clk = clk_get(NULL, "pll5_ddr");
+ if (!IS_ERR(clk)) {
+ clk_prepare_enable(clk);
+ clk_put(clk);
+ }
+}
+
static void __init sunxi_init_clocks(struct device_node *np)
{
/* Register factor clocks */
@@ -629,6 +654,9 @@ static void __init sunxi_init_clocks(str
/* Register gate clocks */
of_sunxi_table_clock_setup(clk_gates_match, sunxi_gates_clk_setup);
+
+ /* Enable core system clocks */
+ sunxi_clock_protect();
}
CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sunxi_init_clocks);
CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sunxi_init_clocks);

63
target/linux/sunxi/patches-3.13/104-clk-sunxi-fix-memory-leak.patch
View File

@ -1,63 +0,0 @@
From 9dc8189536f4c59bb7ad8c736021cefc1488bf74 Mon Sep 17 00:00:00 2001
From: "Victor N. Ramos Mello" <victornrm@gmail.com>
Date: Fri, 18 Oct 2013 20:27:51 -0300
Subject: [PATCH] drivers: clk: sunxi: Fix memory leakage in clk-sunxi.c
Fix a possible memory leak in sun4i_osc_clk_setup().
Moved clock-frequency check to save superfluous allocation.
Signed-off-by: Victor N. Ramos Mello <victornrm@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/sunxi/clk-sunxi.c | 28 +++++++++++++++++-----------
1 file changed, 17 insertions(+), 11 deletions(-)
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -37,18 +37,16 @@ static void __init sun4i_osc_clk_setup(s
const char *clk_name = node->name;
u32 rate;
+ if (of_property_read_u32(node, "clock-frequency", &rate))
+ return;
+
/* allocate fixed-rate and gate clock structs */
fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL);
if (!fixed)
return;
gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
- if (!gate) {
- kfree(fixed);
- return;
- }
-
- if (of_property_read_u32(node, "clock-frequency", &rate))
- return;
+ if (!gate)
+ goto err_free_fixed;
/* set up gate and fixed rate properties */
gate->reg = of_iomap(node, 0);
@@ -63,10 +61,18 @@ static void __init sun4i_osc_clk_setup(s
&gate->hw, &clk_gate_ops,
CLK_IS_ROOT);
- if (!IS_ERR(clk)) {
- of_clk_add_provider(node, of_clk_src_simple_get, clk);
- clk_register_clkdev(clk, clk_name, NULL);
- }
+ if (IS_ERR(clk))
+ goto err_free_gate;
+
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+
+ return;
+
+err_free_gate:
+ kfree(gate);
+err_free_fixed:
+ kfree(fixed);
}
CLK_OF_DECLARE(sun4i_osc, "allwinner,sun4i-osc-clk", sun4i_osc_clk_setup);

206
target/linux/sunxi/patches-3.13/105-reset-add-reset-ctrler.patch
View File

@ -1,206 +0,0 @@
From 8015cea648c452bbfe0fc820dcb1185beaeb8736 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Tue, 24 Sep 2013 11:07:43 +0300
Subject: [PATCH] reset: Add Allwinner SoCs Reset Controller Driver
The Allwinner A31 and most of the other Allwinner SoCs have an IP
maintaining a few other IPs in the SoC in reset by default. Among these
IPs are the A31's High Speed Timers, hence why we can't use the regular
driver construct in every cases, and need to call the registering
function directly during machine initialisation.
Apart from this, the implementation is fairly straightforward, and could
easily be moved to a generic MMIO-based reset controller driver if the
need ever arise.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/reset/Makefile | 1 +
drivers/reset/reset-sunxi.c | 175 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 176 insertions(+)
create mode 100644 drivers/reset/reset-sunxi.c
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_RESET_CONTROLLER) += core.o
+obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
--- /dev/null
+++ b/drivers/reset/reset-sunxi.c
@@ -0,0 +1,175 @@
+/*
+ * Allwinner SoCs Reset Controller driver
+ *
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+struct sunxi_reset_data {
+ spinlock_t lock;
+ void __iomem *membase;
+ struct reset_controller_dev rcdev;
+};
+
+static int sunxi_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct sunxi_reset_data *data = container_of(rcdev,
+ struct sunxi_reset_data,
+ rcdev);
+ int bank = id / BITS_PER_LONG;
+ int offset = id % BITS_PER_LONG;
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&data->lock, flags);
+
+ reg = readl(data->membase + (bank * 4));
+ writel(reg & ~BIT(offset), data->membase + (bank * 4));
+
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ return 0;
+}
+
+static int sunxi_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct sunxi_reset_data *data = container_of(rcdev,
+ struct sunxi_reset_data,
+ rcdev);
+ int bank = id / BITS_PER_LONG;
+ int offset = id % BITS_PER_LONG;
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&data->lock, flags);
+
+ reg = readl(data->membase + (bank * 4));
+ writel(reg | BIT(offset), data->membase + (bank * 4));
+
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ return 0;
+}
+
+static struct reset_control_ops sunxi_reset_ops = {
+ .assert = sunxi_reset_assert,
+ .deassert = sunxi_reset_deassert,
+};
+
+static int sunxi_reset_init(struct device_node *np)
+{
+ struct sunxi_reset_data *data;
+ struct resource res;
+ resource_size_t size;
+ int ret;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret)
+ goto err_alloc;
+
+ size = resource_size(&res);
+ if (!request_mem_region(res.start, size, np->name)) {
+ ret = -EBUSY;
+ goto err_alloc;
+ }
+
+ data->membase = ioremap(res.start, size);
+ if (!data->membase) {
+ ret = -ENOMEM;
+ goto err_alloc;
+ }
+
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.nr_resets = size * 32;
+ data->rcdev.ops = &sunxi_reset_ops;
+ data->rcdev.of_node = np;
+ reset_controller_register(&data->rcdev);
+
+ return 0;
+
+err_alloc:
+ kfree(data);
+ return ret;
+};
+
+/*
+ * These are the reset controller we need to initialize early on in
+ * our system, before we can even think of using a regular device
+ * driver for it.
+ */
+static const struct of_device_id sunxi_early_reset_dt_ids[] __initdata = {
+ { .compatible = "allwinner,sun6i-a31-ahb1-reset", },
+ { /* sentinel */ },
+};
+
+void __init sun6i_reset_init(void)
+{
+ struct device_node *np;
+
+ for_each_matching_node(np, sunxi_early_reset_dt_ids)
+ sunxi_reset_init(np);
+}
+
+/*
+ * And these are the controllers we can register through the regular
+ * device model.
+ */
+static const struct of_device_id sunxi_reset_dt_ids[] = {
+ { .compatible = "allwinner,sun6i-a31-clock-reset", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, sunxi_reset_dt_ids);
+
+static int sunxi_reset_probe(struct platform_device *pdev)
+{
+ return sunxi_reset_init(pdev->dev.of_node);
+}
+
+static int sunxi_reset_remove(struct platform_device *pdev)
+{
+ struct sunxi_reset_data *data = platform_get_drvdata(pdev);
+
+ reset_controller_unregister(&data->rcdev);
+ iounmap(data->membase);
+ kfree(data);
+
+ return 0;
+}
+
+static struct platform_driver sunxi_reset_driver = {
+ .probe = sunxi_reset_probe,
+ .remove = sunxi_reset_remove,
+ .driver = {
+ .name = "sunxi-reset",
+ .owner = THIS_MODULE,
+ .of_match_table = sunxi_reset_dt_ids,
+ },
+};
+module_platform_driver(sunxi_reset_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com");
+MODULE_DESCRIPTION("Allwinner SoCs Reset Controller Driver");
+MODULE_LICENSE("GPL");

23
target/linux/sunxi/patches-3.13/106-add-Kconfig-for-reset.patch
View File

@ -1,23 +0,0 @@
From 73f948fb57f489ed8252fa8480575c91f027200d Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Tue, 24 Sep 2013 11:09:55 +0300
Subject: [PATCH] ARM: sunxi: Select ARCH_HAS_RESET_CONTROLLER
The A31 has a reset controller, and we have to select this option to
have access to the reset controller framework.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
---
arch/arm/mach-sunxi/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,5 +1,6 @@
config ARCH_SUNXI
bool "Allwinner A1X SOCs" if ARCH_MULTI_V7
+ select ARCH_HAS_RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
select CLKSRC_MMIO

45
target/linux/sunxi/patches-3.13/107-sunxi-register-a31-reset.patch
View File

@ -1,45 +0,0 @@
From dae0e37c2df466f5eb6459d05f392e86b4236666 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Sat, 5 Oct 2013 14:53:48 +0200
Subject: [PATCH] ARM: sunxi: Register the A31 reset IP in init_time
The A31 has a reset IP that maintains a few other IPs in reset by
default. Among these IPs are the UARTs, and most notably the timers. We
thus need to register the reset driver before initializing the timers so
that the reset timer can use the reset framework.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
---
arch/arm/mach-sunxi/sunxi.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -10,6 +10,8 @@
* warranty of any kind, whether express or implied.
*/
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -132,8 +134,17 @@ static const char * const sun6i_board_dt
NULL,
};
+extern void __init sun6i_reset_init(void);
+static void __init sun6i_timer_init(void)
+{
+ of_clk_init(NULL);
+ sun6i_reset_init();
+ clocksource_of_init();
+}
+
DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family")
.init_machine = sunxi_dt_init,
+ .init_time = sun6i_timer_init,
.dt_compat = sun6i_board_dt_compat,
.restart = sun6i_restart,
MACHINE_END

206
target/linux/sunxi/patches-3.13/108-sun6i-add-smp-support.patch
View File

@ -1,206 +0,0 @@
From 6f5002c91f35f6b171bc608b87b3f2b55451f32b Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Sun, 3 Nov 2013 10:30:13 +0100
Subject: [PATCH] ARM: sun6i: Add SMP support for the Allwinner A31
The A31 is a quad Cortex-A7. Add the logic to use the IPs used to
control the CPU configuration and the CPU power so that we can bring up
secondary CPUs at boot.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/mach-sunxi/Makefile | 1 +
arch/arm/mach-sunxi/common.h | 19 +++++++
arch/arm/mach-sunxi/headsmp.S | 9 +++
arch/arm/mach-sunxi/platsmp.c | 124 ++++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-sunxi/sunxi.c | 3 +
5 files changed, 156 insertions(+)
create mode 100644 arch/arm/mach-sunxi/common.h
create mode 100644 arch/arm/mach-sunxi/headsmp.S
create mode 100644 arch/arm/mach-sunxi/platsmp.c
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_ARCH_SUNXI) += sunxi.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
--- /dev/null
+++ b/arch/arm/mach-sunxi/common.h
@@ -0,0 +1,19 @@
+/*
+ * Core functions for Allwinner SoCs
+ *
+ * Copyright (C) 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_SUNXI_COMMON_H_
+#define __ARCH_SUNXI_COMMON_H_
+
+void sun6i_secondary_startup(void);
+extern struct smp_operations sun6i_smp_ops;
+
+#endif /* __ARCH_SUNXI_COMMON_H_ */
--- /dev/null
+++ b/arch/arm/mach-sunxi/headsmp.S
@@ -0,0 +1,9 @@
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ .section ".text.head", "ax"
+
+ENTRY(sun6i_secondary_startup)
+ msr cpsr_fsxc, #0xd3
+ b secondary_startup
+ENDPROC(sun6i_secondary_startup)
--- /dev/null
+++ b/arch/arm/mach-sunxi/platsmp.c
@@ -0,0 +1,124 @@
+/*
+ * SMP support for Allwinner SoCs
+ *
+ * Copyright (C) 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * Based on code
+ * Copyright (C) 2012-2013 Allwinner Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/memory.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/smp.h>
+
+#include "common.h"
+
+#define CPUCFG_CPU_PWR_CLAMP_STATUS_REG(cpu) ((cpu) * 0x40 + 0x64)
+#define CPUCFG_CPU_RST_CTRL_REG(cpu) (((cpu) + 1) * 0x40)
+#define CPUCFG_CPU_CTRL_REG(cpu) (((cpu) + 1) * 0x40 + 0x04)
+#define CPUCFG_CPU_STATUS_REG(cpu) (((cpu) + 1) * 0x40 + 0x08)
+#define CPUCFG_GEN_CTRL_REG 0x184
+#define CPUCFG_PRIVATE0_REG 0x1a4
+#define CPUCFG_PRIVATE1_REG 0x1a8
+#define CPUCFG_DBG_CTL0_REG 0x1e0
+#define CPUCFG_DBG_CTL1_REG 0x1e4
+
+#define PRCM_CPU_PWROFF_REG 0x100
+#define PRCM_CPU_PWR_CLAMP_REG(cpu) (((cpu) * 4) + 0x140)
+
+static void __iomem *cpucfg_membase;
+static void __iomem *prcm_membase;
+
+static DEFINE_SPINLOCK(cpu_lock);
+
+static void __init sun6i_smp_prepare_cpus(unsigned int max_cpus)
+{
+ struct device_node *node;
+
+ node = of_find_compatible_node(NULL, NULL, "allwinner,sun6i-a31-prcm");
+ if (!node) {
+ pr_err("Missing A31 PRCM node in the device tree\n");
+ return;
+ }
+
+ prcm_membase = of_iomap(node, 0);
+ if (!prcm_membase) {
+ pr_err("Couldn't map A31 PRCM registers\n");
+ return;
+ }
+
+ node = of_find_compatible_node(NULL, NULL,
+ "allwinner,sun6i-a31-cpuconfig");
+ if (!node) {
+ pr_err("Missing A31 CPU config node in the device tree\n");
+ return;
+ }
+
+ cpucfg_membase = of_iomap(node, 0);
+ if (!cpucfg_membase)
+ pr_err("Couldn't map A31 CPU config registers\n");
+
+}
+
+static int sun6i_smp_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ u32 reg;
+ int i;
+
+ if (!(prcm_membase && cpucfg_membase))
+ return -EFAULT;
+
+ spin_lock(&cpu_lock);
+
+ /* Set CPU boot address */
+ writel(virt_to_phys(sun6i_secondary_startup),
+ cpucfg_membase + CPUCFG_PRIVATE0_REG);
+
+ /* Assert the CPU core in reset */
+ writel(0, cpucfg_membase + CPUCFG_CPU_RST_CTRL_REG(cpu));
+
+ /* Assert the L1 cache in reset */
+ reg = readl(cpucfg_membase + CPUCFG_GEN_CTRL_REG);
+ writel(reg & ~BIT(cpu), cpucfg_membase + CPUCFG_GEN_CTRL_REG);
+
+ /* Disable external debug access */
+ reg = readl(cpucfg_membase + CPUCFG_DBG_CTL1_REG);
+ writel(reg & ~BIT(cpu), cpucfg_membase + CPUCFG_DBG_CTL1_REG);
+
+ /* Power up the CPU */
+ for (i = 0; i <= 8; i++)
+ writel(0xff >> i, prcm_membase + PRCM_CPU_PWR_CLAMP_REG(cpu));
+ mdelay(10);
+
+ /* Clear CPU power-off gating */
+ reg = readl(prcm_membase + PRCM_CPU_PWROFF_REG);
+ writel(reg & ~BIT(cpu), prcm_membase + PRCM_CPU_PWROFF_REG);
+ mdelay(1);
+
+ /* Deassert the CPU core reset */
+ writel(3, cpucfg_membase + CPUCFG_CPU_RST_CTRL_REG(cpu));
+
+ /* Enable back the external debug accesses */
+ reg = readl(cpucfg_membase + CPUCFG_DBG_CTL1_REG);
+ writel(reg | BIT(cpu), cpucfg_membase + CPUCFG_DBG_CTL1_REG);
+
+ spin_unlock(&cpu_lock);
+
+ return 0;
+}
+
+struct smp_operations sun6i_smp_ops __initdata = {
+ .smp_prepare_cpus = sun6i_smp_prepare_cpus,
+ .smp_boot_secondary = sun6i_smp_boot_secondary,
+};
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -25,6 +25,8 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
+#include "common.h"
+
#define SUN4I_WATCHDOG_CTRL_REG 0x00
#define SUN4I_WATCHDOG_CTRL_RESTART BIT(0)
#define SUN4I_WATCHDOG_MODE_REG 0x04
@@ -147,6 +149,7 @@ DT_MACHINE_START(SUN6I_DT, "Allwinner su
.init_time = sun6i_timer_init,
.dt_compat = sun6i_board_dt_compat,
.restart = sun6i_restart,
+ .smp = smp_ops(sun6i_smp_ops),
MACHINE_END
static const char * const sun7i_board_dt_compat[] = {

90
target/linux/sunxi/patches-3.13/109-dt-sun6i-add-reset-ctrler.patch
View File

@ -1,90 +0,0 @@
From f88dc0623908b574d9dcdae8815ccd0829fc6828 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Tue, 24 Sep 2013 11:10:41 +0300
Subject: [PATCH] ARM: sun6i: Add the reset controller to the DTSI
The A31 has a reset controller IP that maintains a few other IPs in
reset, among which we can find the UARTs, high speed timers or the I2C.
Now that we have support for them, add the reset controllers to the DTSI.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -212,6 +212,24 @@
};
};
+ ahb1_rst: reset@01c202c0 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-ahb1-reset";
+ reg = <0x01c202c0 0xc>;
+ };
+
+ apb1_rst: reset@01c202d0 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x01c202d0 0x4>;
+ };
+
+ apb2_rst: reset@01c202d8 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x01c202d8 0x4>;
+ };
+
timer@01c20c00 {
compatible = "allwinner,sun4i-timer";
reg = <0x01c20c00 0xa0>;
@@ -235,6 +253,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 16>;
+ resets = <&apb2_rst 16>;
status = "disabled";
};
@@ -245,6 +264,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 17>;
+ resets = <&apb2_rst 17>;
status = "disabled";
};
@@ -255,6 +275,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 18>;
+ resets = <&apb2_rst 18>;
status = "disabled";
};
@@ -265,6 +286,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 19>;
+ resets = <&apb2_rst 19>;
status = "disabled";
};
@@ -275,6 +297,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 20>;
+ resets = <&apb2_rst 20>;
status = "disabled";
};
@@ -285,6 +308,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 21>;
+ resets = <&apb2_rst 21>;
status = "disabled";
};

28
target/linux/sunxi/patches-3.13/110-sun4i-clkevent-fill-irqfield.patch
View File

@ -1,28 +0,0 @@
From abc12cd5c39556824cc9022db6eddc64e8e8dbe9 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Wed, 23 Oct 2013 17:54:39 +0100
Subject: [PATCH] clockevent: sun4i: Fill the irq field in the clockevent
structure
The clock event structure irq field was not filled previously to the
interrupt we're using.
This was resulting in the timer not being used at all when using a
configuration with SMP enabled on a system with several CPUs, and with
the cpumask set to the cpu_possible_mask.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clocksource/sun4i_timer.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -191,6 +191,7 @@ static void __init sun4i_timer_init(stru
writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
sun4i_clockevent.cpumask = cpumask_of(0);
+ sun4i_clockevent.irq = irq;
clockevents_config_and_register(&sun4i_clockevent, rate,
TIMER_SYNC_TICKS, 0xffffffff);

25
target/linux/sunxi/patches-3.13/111-sun4i-clksrc-change-cpu-mask.patch
View File

@ -1,25 +0,0 @@
From 64a9fa131380f9cef9328d0cf9f2d49a538e6dd2 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Wed, 9 Oct 2013 22:44:56 +0200
Subject: [PATCH] clocksource: sun4i: change CPU mask to cpu_possible_mask
The interrupt for the timer is a shared processor interrupt, so any CPU
found in the system can handle it. Switch to our cpumask to
cpu_possible_mask instead of cpumask_of(0).
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clocksource/sun4i_timer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -190,7 +190,7 @@ static void __init sun4i_timer_init(stru
val = readl(timer_base + TIMER_IRQ_EN_REG);
writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
- sun4i_clockevent.cpumask = cpumask_of(0);
+ sun4i_clockevent.cpumask = cpu_possible_mask;
sun4i_clockevent.irq = irq;
clockevents_config_and_register(&sun4i_clockevent, rate,

41
target/linux/sunxi/patches-3.13/112-sun4i-clksrc-increase-a-bit-in-clockevent.patch
View File

@ -1,41 +0,0 @@
From a4eb936767bd6a63d54734b9ce48932609ce58eb Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Thu, 7 Nov 2013 12:01:48 +0100
Subject: [PATCH] clocksource: sun4i: Increase a bit the clock event and
sources rating
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
We want to keep this driver as the default provider of the clock events
and source, yet some other driver might fit in the "desired" category of
ratings. Hence, we need to increase a bit the rating so that we can have
more flexibility in the ratings we choose.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/clocksource/sun4i_timer.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -114,7 +114,7 @@ static int sun4i_clkevt_next_event(unsig
static struct clock_event_device sun4i_clockevent = {
.name = "sun4i_tick",
- .rating = 300,
+ .rating = 350,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = sun4i_clkevt_mode,
.set_next_event = sun4i_clkevt_next_event,
@@ -172,7 +172,7 @@ static void __init sun4i_timer_init(stru
setup_sched_clock(sun4i_timer_sched_read, 32, rate);
clocksource_mmio_init(timer_base + TIMER_CNTVAL_REG(1), node->name,
- rate, 300, 32, clocksource_mmio_readl_down);
+ rate, 350, 32, clocksource_mmio_readl_down);
ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);

223
target/linux/sunxi/patches-3.13/113-clk-sunxi-register-factors-clocks.patch
View File

@ -1,223 +0,0 @@
From 9212bc4a3752e9a4db2f73afd99278eb28e5dcff Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Mon, 23 Dec 2013 00:32:32 -0300
Subject: [PATCH] clk: sunxi: register factors clocks behind composite
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This commit reworks factors clock registration to be done behind a
composite clock. This allows us to additionally add a gate, mux or
divisors, as it will be needed by some future PLLs.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/sunxi/clk-factors.c | 63 +------------------------------------
drivers/clk/sunxi/clk-factors.h | 16 +++++-----
drivers/clk/sunxi/clk-sunxi.c | 70 ++++++++++++++++++++++++++++++++++++++---
3 files changed, 76 insertions(+), 73 deletions(-)
--- a/drivers/clk/sunxi/clk-factors.c
+++ b/drivers/clk/sunxi/clk-factors.c
@@ -30,14 +30,6 @@
* parent - fixed parent. No clk_set_parent support
*/
-struct clk_factors {
- struct clk_hw hw;
- void __iomem *reg;
- struct clk_factors_config *config;
- void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p);
- spinlock_t *lock;
-};
-
#define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
#define SETMASK(len, pos) (((1U << (len)) - 1) << (pos))
@@ -120,61 +112,8 @@ static int clk_factors_set_rate(struct c
return 0;
}
-static const struct clk_ops clk_factors_ops = {
+const struct clk_ops clk_factors_ops = {
.recalc_rate = clk_factors_recalc_rate,
.round_rate = clk_factors_round_rate,
.set_rate = clk_factors_set_rate,
};
-
-/**
- * clk_register_factors - register a factors clock with
- * the clock framework
- * @dev: device registering this clock
- * @name: name of this clock
- * @parent_name: name of clock's parent
- * @flags: framework-specific flags
- * @reg: register address to adjust factors
- * @config: shift and width of factors n, k, m and p
- * @get_factors: function to calculate the factors for a given frequency
- * @lock: shared register lock for this clock
- */
-struct clk *clk_register_factors(struct device *dev, const char *name,
- const char *parent_name,
- unsigned long flags, void __iomem *reg,
- struct clk_factors_config *config,
- void (*get_factors)(u32 *rate, u32 parent,
- u8 *n, u8 *k, u8 *m, u8 *p),
- spinlock_t *lock)
-{
- struct clk_factors *factors;
- struct clk *clk;
- struct clk_init_data init;
-
- /* allocate the factors */
- factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL);
- if (!factors) {
- pr_err("%s: could not allocate factors clk\n", __func__);
- return ERR_PTR(-ENOMEM);
- }
-
- init.name = name;
- init.ops = &clk_factors_ops;
- init.flags = flags;
- init.parent_names = (parent_name ? &parent_name : NULL);
- init.num_parents = (parent_name ? 1 : 0);
-
- /* struct clk_factors assignments */
- factors->reg = reg;
- factors->config = config;
- factors->lock = lock;
- factors->hw.init = &init;
- factors->get_factors = get_factors;
-
- /* register the clock */
- clk = clk_register(dev, &factors->hw);
-
- if (IS_ERR(clk))
- kfree(factors);
-
- return clk;
-}
--- a/drivers/clk/sunxi/clk-factors.h
+++ b/drivers/clk/sunxi/clk-factors.h
@@ -17,11 +17,13 @@ struct clk_factors_config {
u8 pwidth;
};
-struct clk *clk_register_factors(struct device *dev, const char *name,
- const char *parent_name,
- unsigned long flags, void __iomem *reg,
- struct clk_factors_config *config,
- void (*get_factors) (u32 *rate, u32 parent_rate,
- u8 *n, u8 *k, u8 *m, u8 *p),
- spinlock_t *lock);
+struct clk_factors {
+ struct clk_hw hw;
+ void __iomem *reg;
+ struct clk_factors_config *config;
+ void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p);
+ spinlock_t *lock;
+};
+
+extern const struct clk_ops clk_factors_ops;
#endif
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -23,6 +23,9 @@
static DEFINE_SPINLOCK(clk_lock);
+/* Maximum number of parents our clocks have */
+#define SUNXI_MAX_PARENTS 5
+
/**
* sun4i_osc_clk_setup() - Setup function for gatable oscillator
*/
@@ -261,7 +264,11 @@ static void sun4i_get_apb1_factors(u32 *
* sunxi_factors_clk_setup() - Setup function for factor clocks
*/
+#define SUNXI_FACTORS_MUX_MASK 0x3
+
struct factors_data {
+ int enable;
+ int mux;
struct clk_factors_config *table;
void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p);
};
@@ -312,16 +319,71 @@ static void __init sunxi_factors_clk_set
struct factors_data *data)
{
struct clk *clk;
+ struct clk_factors *factors;
+ struct clk_gate *gate = NULL;
+ struct clk_mux *mux = NULL;
+ struct clk_hw *gate_hw = NULL;
+ struct clk_hw *mux_hw = NULL;
const char *clk_name = node->name;
- const char *parent;
+ const char *parents[SUNXI_MAX_PARENTS];
void *reg;
+ int i = 0;
reg = of_iomap(node, 0);
- parent = of_clk_get_parent_name(node, 0);
+ /* if we have a mux, we will have >1 parents */
+ while (i < SUNXI_MAX_PARENTS &&
+ (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
+ i++;
+
+ factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL);
+ if (!factors)
+ return;
+
+ /* Add a gate if this factor clock can be gated */
+ if (data->enable) {
+ gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+ if (!gate) {
+ kfree(factors);
+ return;
+ }
+
+ /* set up gate properties */
+ gate->reg = reg;
+ gate->bit_idx = data->enable;
+ gate->lock = &clk_lock;
+ gate_hw = &gate->hw;
+ }
+
+ /* Add a mux if this factor clock can be muxed */
+ if (data->mux) {
+ mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
+ if (!mux) {
+ kfree(factors);
+ kfree(gate);
+ return;
+ }
+
+ /* set up gate properties */
+ mux->reg = reg;
+ mux->shift = data->mux;
+ mux->mask = SUNXI_FACTORS_MUX_MASK;
+ mux->lock = &clk_lock;
+ mux_hw = &mux->hw;
+ }
- clk = clk_register_factors(NULL, clk_name, parent, 0, reg,
- data->table, data->getter, &clk_lock);
+ /* set up factors properties */
+ factors->reg = reg;
+ factors->config = data->table;
+ factors->get_factors = data->getter;
+ factors->lock = &clk_lock;
+
+ clk = clk_register_composite(NULL, clk_name,
+ parents, i,
+ mux_hw, &clk_mux_ops,
+ &factors->hw, &clk_factors_ops,
+ gate_hw, &clk_gate_ops,
+ i ? 0 : CLK_IS_ROOT);
if (!IS_ERR(clk)) {
of_clk_add_provider(node, of_clk_src_simple_get, clk);

35
target/linux/sunxi/patches-3.13/114-clk-sunxi-clean-magic-number.patch
View File

@ -1,35 +0,0 @@
From 33574f94b0d4d8bc8af732fbcb4f911c3dd8c96b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Mon, 23 Dec 2013 00:32:33 -0300
Subject: [PATCH] clk: sunxi: clean the magic number of mux parents
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This was pointed out during the review of the factor patches. Let's
indicate what does that magic 5 mean.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
---
drivers/clk/sunxi/clk-sunxi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -420,13 +420,14 @@ static void __init sunxi_mux_clk_setup(s
{
struct clk *clk;
const char *clk_name = node->name;
- const char *parents[5];
+ const char *parents[SUNXI_MAX_PARENTS];
void *reg;
int i = 0;
reg = of_iomap(node, 0);
- while (i < 5 && (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
+ while (i < SUNXI_MAX_PARENTS &&
+ (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
i++;
clk = clk_register_mux(NULL, clk_name, parents, i,

46
target/linux/sunxi/patches-3.13/115-clk-sunxi_add-gating-pll1.patch
View File

@ -1,46 +0,0 @@
From 3d56b9643ff9fff3c7ceb095e03f4ab7e149b9ce Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Mon, 23 Dec 2013 00:32:34 -0300
Subject: [PATCH] clk: sunxi: add gating support to PLL1
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This commit adds gating support to PLL1 on the clock driver. This makes
the PLL1 implementation fully compatible with PLL4 as well.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
---
Documentation/devicetree/bindings/clock/sunxi.txt | 2 +-
drivers/clk/sunxi/clk-sunxi.c | 2 ++
2 files changed, 3 insertions(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -7,7 +7,7 @@ This binding uses the common clock bindi
Required properties:
- compatible : shall be one of the following:
"allwinner,sun4i-osc-clk" - for a gatable oscillator
- "allwinner,sun4i-pll1-clk" - for the main PLL clock
+ "allwinner,sun4i-pll1-clk" - for the main PLL clock and PLL4
"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
"allwinner,sun4i-axi-clk" - for the AXI clock
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -301,11 +301,13 @@ static struct clk_factors_config sun4i_a
};
static const struct factors_data sun4i_pll1_data __initconst = {
+ .enable = 31,
.table = &sun4i_pll1_config,
.getter = sun4i_get_pll1_factors,
};
static const struct factors_data sun6i_a31_pll1_data __initconst = {
+ .enable = 31,
.table = &sun6i_a31_pll1_config,
.getter = sun6i_a31_get_pll1_factors,
};

84
target/linux/sunxi/patches-3.13/116-clk-sunxi-add-pll4.patch
View File

@ -1,84 +0,0 @@
From ff0b5fdb65bc7f10af7e83bb0919cb6bec2dc624 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Mon, 23 Dec 2013 00:32:35 -0300
Subject: [PATCH] ARM: sunxi: add PLL4 support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This commit adds the PLL4 definition to the sun4i, sun5i and sun7i
device trees. PLL4 is compatible with PLL1.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 7 +++++++
arch/arm/boot/dts/sun5i-a10s.dtsi | 7 +++++++
arch/arm/boot/dts/sun5i-a13.dtsi | 7 +++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++
4 files changed, 28 insertions(+)
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -66,6 +66,13 @@
clocks = <&osc24M>;
};
+ pll4: pll4@01c20018 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-pll1-clk";
+ reg = <0x01c20018 0x4>;
+ clocks = <&osc24M>;
+ };
+
/* dummy is 200M */
cpu: cpu@01c20054 {
#clock-cells = <0>;
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -63,6 +63,13 @@
clocks = <&osc24M>;
};
+ pll4: pll4@01c20018 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-pll1-clk";
+ reg = <0x01c20018 0x4>;
+ clocks = <&osc24M>;
+ };
+
/* dummy is 200M */
cpu: cpu@01c20054 {
#clock-cells = <0>;
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -67,6 +67,13 @@
clocks = <&osc24M>;
};
+ pll4: pll4@01c20018 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-pll1-clk";
+ reg = <0x01c20018 0x4>;
+ clocks = <&osc24M>;
+ };
+
/* dummy is 200M */
cpu: cpu@01c20054 {
#clock-cells = <0>;
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -62,6 +62,13 @@
clocks = <&osc24M>;
};
+ pll4: pll4@01c20018 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-pll1-clk";
+ reg = <0x01c20018 0x4>;
+ clocks = <&osc24M>;
+ };
+
/*
* This is a dummy clock, to be used as placeholder on
* other mux clocks when a specific parent clock is not

74
target/linux/sunxi/patches-3.13/117-clk-sunxi-factors_clk_setup_update.patch
View File

@ -1,74 +0,0 @@
From 8a3282a0a185108e37e7a48437b58d956ff56f4a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Mon, 23 Dec 2013 00:32:36 -0300
Subject: [PATCH] clk: sunxi: make factors_clk_setup return the clock it
registers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
We will be needing this to register a factor clock as parent with leaf
divisors on a single call.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Mike Turquette <mturquette@linaro.org>
---
drivers/clk/sunxi/clk-sunxi.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -317,8 +317,8 @@ static const struct factors_data sun4i_a
.getter = sun4i_get_apb1_factors,
};
-static void __init sunxi_factors_clk_setup(struct device_node *node,
- struct factors_data *data)
+static struct clk * __init sunxi_factors_clk_setup(struct device_node *node,
+ const struct factors_data *data)
{
struct clk *clk;
struct clk_factors *factors;
@@ -340,14 +340,14 @@ static void __init sunxi_factors_clk_set
factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL);
if (!factors)
- return;
+ return NULL;
/* Add a gate if this factor clock can be gated */
if (data->enable) {
gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
if (!gate) {
kfree(factors);
- return;
+ return NULL;
}
/* set up gate properties */
@@ -363,7 +363,7 @@ static void __init sunxi_factors_clk_set
if (!mux) {
kfree(factors);
kfree(gate);
- return;
+ return NULL;
}
/* set up gate properties */
@@ -384,13 +384,14 @@ static void __init sunxi_factors_clk_set
parents, i,
mux_hw, &clk_mux_ops,
&factors->hw, &clk_factors_ops,
- gate_hw, &clk_gate_ops,
- i ? 0 : CLK_IS_ROOT);
+ gate_hw, &clk_gate_ops, 0);
if (!IS_ERR(clk)) {
of_clk_add_provider(node, of_clk_src_simple_get, clk);
clk_register_clkdev(clk, clk_name, NULL);
}
+
+ return clk;
}

303
target/linux/sunxi/patches-3.13/118-clk-sunxi-add-pll5-pll6.patch
View File

@ -1,303 +0,0 @@
From 655893a197a5134a371a5c6b579f1bbce03ab413 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Mon, 23 Dec 2013 00:32:37 -0300
Subject: [PATCH] clk: sunxi: add PLL5 and PLL6 support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This commit implements PLL5 and PLL6 support on the sunxi clock driver.
These PLLs use a similar factor clock, but differ on their outputs.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Mike Turquette <mturquette@linaro.org>
---
Documentation/devicetree/bindings/clock/sunxi.txt | 2 +
drivers/clk/sunxi/clk-sunxi.c | 230 ++++++++++++++++++++++
2 files changed, 232 insertions(+)
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -9,6 +9,8 @@ Required properties:
"allwinner,sun4i-osc-clk" - for a gatable oscillator
"allwinner,sun4i-pll1-clk" - for the main PLL clock and PLL4
"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
+ "allwinner,sun4i-pll5-clk" - for the PLL5 clock
+ "allwinner,sun4i-pll6-clk" - for the PLL6 clock
"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
"allwinner,sun4i-axi-clk" - for the AXI clock
"allwinner,sun4i-axi-gates-clk" - for the AXI gates
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -218,6 +218,40 @@ static void sun6i_a31_get_pll1_factors(u
}
/**
+ * sun4i_get_pll5_factors() - calculates n, k factors for PLL5
+ * PLL5 rate is calculated as follows
+ * rate = parent_rate * n * (k + 1)
+ * parent_rate is always 24Mhz
+ */
+
+static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p)
+{
+ u8 div;
+
+ /* Normalize value to a parent_rate multiple (24M) */
+ div = *freq / parent_rate;
+ *freq = parent_rate * div;
+
+ /* we were called to round the frequency, we can now return */
+ if (n == NULL)
+ return;
+
+ if (div < 31)
+ *k = 0;
+ else if (div / 2 < 31)
+ *k = 1;
+ else if (div / 3 < 31)
+ *k = 2;
+ else
+ *k = 3;
+
+ *n = DIV_ROUND_UP(div, (*k+1));
+}
+
+
+
+/**
* sun4i_get_apb1_factors() - calculates m, p factors for APB1
* APB1 rate is calculated as follows
* rate = (parent_rate >> p) / (m + 1);
@@ -293,6 +327,13 @@ static struct clk_factors_config sun6i_a
.mwidth = 2,
};
+static struct clk_factors_config sun4i_pll5_config = {
+ .nshift = 8,
+ .nwidth = 5,
+ .kshift = 4,
+ .kwidth = 2,
+};
+
static struct clk_factors_config sun4i_apb1_config = {
.mshift = 0,
.mwidth = 5,
@@ -312,6 +353,12 @@ static const struct factors_data sun6i_a
.getter = sun6i_a31_get_pll1_factors,
};
+static const struct factors_data sun4i_pll5_data __initconst = {
+ .enable = 31,
+ .table = &sun4i_pll5_config,
+ .getter = sun4i_get_pll5_factors,
+};
+
static const struct factors_data sun4i_apb1_data __initconst = {
.table = &sun4i_apb1_config,
.getter = sun4i_get_apb1_factors,
@@ -627,6 +674,179 @@ static void __init sunxi_gates_clk_setup
of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
}
+
+
+/**
+ * sunxi_divs_clk_setup() helper data
+ */
+
+#define SUNXI_DIVS_MAX_QTY 2
+#define SUNXI_DIVISOR_WIDTH 2
+
+struct divs_data {
+ const struct factors_data *factors; /* data for the factor clock */
+ struct {
+ u8 fixed; /* is it a fixed divisor? if not... */
+ struct clk_div_table *table; /* is it a table based divisor? */
+ u8 shift; /* otherwise it's a normal divisor with this shift */
+ u8 pow; /* is it power-of-two based? */
+ u8 gate; /* is it independently gateable? */
+ } div[SUNXI_DIVS_MAX_QTY];
+};
+
+static struct clk_div_table pll6_sata_tbl[] = {
+ { .val = 0, .div = 6, },
+ { .val = 1, .div = 12, },
+ { .val = 2, .div = 18, },
+ { .val = 3, .div = 24, },
+ { } /* sentinel */
+};
+
+static const struct divs_data pll5_divs_data __initconst = {
+ .factors = &sun4i_pll5_data,
+ .div = {
+ { .shift = 0, .pow = 0, }, /* M, DDR */
+ { .shift = 16, .pow = 1, }, /* P, other */
+ }
+};
+
+static const struct divs_data pll6_divs_data __initconst = {
+ .factors = &sun4i_pll5_data,
+ .div = {
+ { .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */
+ { .fixed = 2 }, /* P, other */
+ }
+};
+
+/**
+ * sunxi_divs_clk_setup() - Setup function for leaf divisors on clocks
+ *
+ * These clocks look something like this
+ * ________________________
+ * | ___divisor 1---|----> to consumer
+ * parent >--| pll___/___divisor 2---|----> to consumer
+ * | \_______________|____> to consumer
+ * |________________________|
+ */
+
+static void __init sunxi_divs_clk_setup(struct device_node *node,
+ struct divs_data *data)
+{
+ struct clk_onecell_data *clk_data;
+ const char *parent = node->name;
+ const char *clk_name;
+ struct clk **clks, *pclk;
+ struct clk_hw *gate_hw, *rate_hw;
+ const struct clk_ops *rate_ops;
+ struct clk_gate *gate = NULL;
+ struct clk_fixed_factor *fix_factor;
+ struct clk_divider *divider;
+ void *reg;
+ int i = 0;
+ int flags, clkflags;
+
+ /* Set up factor clock that we will be dividing */
+ pclk = sunxi_factors_clk_setup(node, data->factors);
+
+ reg = of_iomap(node, 0);
+
+ clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
+ if (!clk_data)
+ return;
+
+ clks = kzalloc(SUNXI_DIVS_MAX_QTY * sizeof(struct clk *), GFP_KERNEL);
+ if (!clks)
+ goto free_clkdata;
+
+ clk_data->clks = clks;
+
+ /* It's not a good idea to have automatic reparenting changing
+ * our RAM clock! */
+ clkflags = !strcmp("pll5", parent) ? 0 : CLK_SET_RATE_PARENT;
+
+ for (i = 0; i < SUNXI_DIVS_MAX_QTY; i++) {
+ if (of_property_read_string_index(node, "clock-output-names",
+ i, &clk_name) != 0)
+ break;
+
+ gate_hw = NULL;
+ rate_hw = NULL;
+ rate_ops = NULL;
+
+ /* If this leaf clock can be gated, create a gate */
+ if (data->div[i].gate) {
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ goto free_clks;
+
+ gate->reg = reg;
+ gate->bit_idx = data->div[i].gate;
+ gate->lock = &clk_lock;
+
+ gate_hw = &gate->hw;
+ }
+
+ /* Leaves can be fixed or configurable divisors */
+ if (data->div[i].fixed) {
+ fix_factor = kzalloc(sizeof(*fix_factor), GFP_KERNEL);
+ if (!fix_factor)
+ goto free_gate;
+
+ fix_factor->mult = 1;
+ fix_factor->div = data->div[i].fixed;
+
+ rate_hw = &fix_factor->hw;
+ rate_ops = &clk_fixed_factor_ops;
+ } else {
+ divider = kzalloc(sizeof(*divider), GFP_KERNEL);
+ if (!divider)
+ goto free_gate;
+
+ flags = data->div[i].pow ? CLK_DIVIDER_POWER_OF_TWO : 0;
+
+ divider->reg = reg;
+ divider->shift = data->div[i].shift;
+ divider->width = SUNXI_DIVISOR_WIDTH;
+ divider->flags = flags;
+ divider->lock = &clk_lock;
+ divider->table = data->div[i].table;
+
+ rate_hw = &divider->hw;
+ rate_ops = &clk_divider_ops;
+ }
+
+ /* Wrap the (potential) gate and the divisor on a composite
+ * clock to unify them */
+ clks[i] = clk_register_composite(NULL, clk_name, &parent, 1,
+ NULL, NULL,
+ rate_hw, rate_ops,
+ gate_hw, &clk_gate_ops,
+ clkflags);
+
+ WARN_ON(IS_ERR(clk_data->clks[i]));
+ clk_register_clkdev(clks[i], clk_name, NULL);
+ }
+
+ /* The last clock available on the getter is the parent */
+ clks[i++] = pclk;
+
+ /* Adjust to the real max */
+ clk_data->clk_num = i;
+
+ of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ return;
+
+free_gate:
+ kfree(gate);
+free_clks:
+ kfree(clks);
+free_clkdata:
+ kfree(clk_data);
+}
+
+
+
/* Matches for factors clocks */
static const struct of_device_id clk_factors_match[] __initconst = {
{.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,},
@@ -644,6 +864,13 @@ static const struct of_device_id clk_div
{}
};
+/* Matches for divided outputs */
+static const struct of_device_id clk_divs_match[] __initconst = {
+ {.compatible = "allwinner,sun4i-pll5-clk", .data = &pll5_divs_data,},
+ {.compatible = "allwinner,sun4i-pll6-clk", .data = &pll6_divs_data,},
+ {}
+};
+
/* Matches for mux clocks */
static const struct of_device_id clk_mux_match[] __initconst = {
{.compatible = "allwinner,sun4i-cpu-clk", .data = &sun4i_cpu_mux_data,},
@@ -721,6 +948,9 @@ static void __init sunxi_init_clocks(str
/* Register divider clocks */
of_sunxi_table_clock_setup(clk_div_match, sunxi_divider_clk_setup);
+ /* Register divided output clocks */
+ of_sunxi_table_clock_setup(clk_divs_match, sunxi_divs_clk_setup);
+
/* Register mux clocks */
of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup);

187
target/linux/sunxi/patches-3.13/119-dt-sunxi-add-pll5-pll6.patch
View File

@ -1,187 +0,0 @@
From 6d3ca59232090bff1b5e1abfd3417a3859e47425 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Mon, 23 Dec 2013 00:32:38 -0300
Subject: [PATCH] ARM: sunxi: add PLL5 and PLL6 support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This commit adds PLL5 and PLL6 nodes to the sun4i, sun5i and sun7i
device trees.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 19 +++++++++++++++++--
arch/arm/boot/dts/sun5i-a10s.dtsi | 19 +++++++++++++++++--
arch/arm/boot/dts/sun5i-a13.dtsi | 19 +++++++++++++++++--
arch/arm/boot/dts/sun7i-a20.dtsi | 28 ++++++++++++++++------------
4 files changed, 67 insertions(+), 18 deletions(-)
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -73,6 +73,22 @@
clocks = <&osc24M>;
};
+ pll5: pll5@01c20020 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-pll5-clk";
+ reg = <0x01c20020 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll5_ddr", "pll5_other";
+ };
+
+ pll6: pll6@01c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6_sata", "pll6_other", "pll6";
+ };
+
/* dummy is 200M */
cpu: cpu@01c20054 {
#clock-cells = <0>;
@@ -138,12 +154,11 @@
"apb0_ir1", "apb0_keypad";
};
- /* dummy is pll62 */
apb1_mux: apb1_mux@01c20058 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-apb1-mux-clk";
reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&dummy>, <&osc32k>;
+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
};
apb1: apb1@01c20058 {
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -70,6 +70,22 @@
clocks = <&osc24M>;
};
+ pll5: pll5@01c20020 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-pll5-clk";
+ reg = <0x01c20020 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll5_ddr", "pll5_other";
+ };
+
+ pll6: pll6@01c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6_sata", "pll6_other", "pll6";
+ };
+
/* dummy is 200M */
cpu: cpu@01c20054 {
#clock-cells = <0>;
@@ -130,12 +146,11 @@
"apb0_ir", "apb0_keypad";
};
- /* dummy is pll62 */
apb1_mux: apb1_mux@01c20058 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-apb1-mux-clk";
reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&dummy>, <&osc32k>;
+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
};
apb1: apb1@01c20058 {
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -74,6 +74,22 @@
clocks = <&osc24M>;
};
+ pll5: pll5@01c20020 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-pll5-clk";
+ reg = <0x01c20020 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll5_ddr", "pll5_other";
+ };
+
+ pll6: pll6@01c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6_sata", "pll6_other", "pll6";
+ };
+
/* dummy is 200M */
cpu: cpu@01c20054 {
#clock-cells = <0>;
@@ -132,12 +148,11 @@
clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir";
};
- /* dummy is pll6 */
apb1_mux: apb1_mux@01c20058 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-apb1-mux-clk";
reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&dummy>, <&osc32k>;
+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
};
apb1: apb1@01c20058 {
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -69,23 +69,27 @@
clocks = <&osc24M>;
};
- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- pll6: pll6 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
+ pll5: pll5@01c20020 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-pll5-clk";
+ reg = <0x01c20020 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll5_ddr", "pll5_other";
+ };
+
+ pll6: pll6@01c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6_sata", "pll6_other", "pll6";
};
cpu: cpu@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-cpu-clk";
reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6>;
+ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
};
axi: axi@01c20054 {
@@ -144,7 +148,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun4i-apb1-mux-clk";
reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6>, <&osc32k>;
+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
};
apb1: apb1@01c20058 {

122
target/linux/sunxi/patches-3.13/120-clk-sunxi-mod0.patch
View File

@ -1,122 +0,0 @@
From bdc913d1ef5143a8728ae414fcb90f9ed87a58da Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Mon, 23 Dec 2013 00:32:39 -0300
Subject: [PATCH] clk: sunxi: mod0 support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This commit implements support for the "module 0" type of clocks, as
used by MMC, IR, NAND, SATA and other components.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Mike Turquette <mturquette@linaro.org>
---
Documentation/devicetree/bindings/clock/sunxi.txt | 5 +-
drivers/clk/sunxi/clk-sunxi.c | 57 +++++++++++++++++++++++
2 files changed, 61 insertions(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -35,10 +35,13 @@ Required properties:
"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
+ "allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
Required properties for all clocks:
- reg : shall be the control register address for the clock.
-- clocks : shall be the input parent clock(s) phandle for the clock
+- clocks : shall be the input parent clock(s) phandle for the clock. For
+ multiplexed clocks, the list order must match the hardware
+ programming order.
- #clock-cells : from common clock binding; shall be set to 0 except for
"allwinner,*-gates-clk" where it shall be set to 1
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -295,6 +295,47 @@ static void sun4i_get_apb1_factors(u32 *
/**
+ * sun4i_get_mod0_factors() - calculates m, n factors for MOD0-style clocks
+ * MMC rate is calculated as follows
+ * rate = (parent_rate >> p) / (m + 1);
+ */
+
+static void sun4i_get_mod0_factors(u32 *freq, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p)
+{
+ u8 div, calcm, calcp;
+
+ /* These clocks can only divide, so we will never be able to achieve
+ * frequencies higher than the parent frequency */
+ if (*freq > parent_rate)
+ *freq = parent_rate;
+
+ div = parent_rate / *freq;
+
+ if (div < 16)
+ calcp = 0;
+ else if (div / 2 < 16)
+ calcp = 1;
+ else if (div / 4 < 16)
+ calcp = 2;
+ else
+ calcp = 3;
+
+ calcm = DIV_ROUND_UP(div, 1 << calcp);
+
+ *freq = (parent_rate >> calcp) / calcm;
+
+ /* we were called to round the frequency, we can now return */
+ if (n == NULL)
+ return;
+
+ *m = calcm - 1;
+ *p = calcp;
+}
+
+
+
+/**
* sunxi_factors_clk_setup() - Setup function for factor clocks
*/
@@ -341,6 +382,14 @@ static struct clk_factors_config sun4i_a
.pwidth = 2,
};
+/* user manual says "n" but it's really "p" */
+static struct clk_factors_config sun4i_mod0_config = {
+ .mshift = 0,
+ .mwidth = 4,
+ .pshift = 16,
+ .pwidth = 2,
+};
+
static const struct factors_data sun4i_pll1_data __initconst = {
.enable = 31,
.table = &sun4i_pll1_config,
@@ -364,6 +413,13 @@ static const struct factors_data sun4i_a
.getter = sun4i_get_apb1_factors,
};
+static const struct factors_data sun4i_mod0_data __initconst = {
+ .enable = 31,
+ .mux = 24,
+ .table = &sun4i_mod0_config,
+ .getter = sun4i_get_mod0_factors,
+};
+
static struct clk * __init sunxi_factors_clk_setup(struct device_node *node,
const struct factors_data *data)
{
@@ -852,6 +908,7 @@ static const struct of_device_id clk_fac
{.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,},
{.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
{.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,},
+ {.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,},
{}
};

47
target/linux/sunxi/patches-3.13/121-clk-sunxi-better-factor-dt-nodes.patch
View File

@ -1,47 +0,0 @@
From 7d47b009bf287bf5e0817f47c40e32b7ec0e8151 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Mon, 23 Dec 2013 00:32:40 -0300
Subject: [PATCH] clk: sunxi: support better factor DT nodes
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The DT nodes should look like
abc_clk: clk@deadbeef {
...
clock-output-names = "abc";
}
But our old DT nodes look like
abc: abc@deadbeef {
...
}
So, let's support both formats, until we can transition everything
to the new, correct one.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
---
drivers/clk/sunxi/clk-sunxi.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -441,6 +441,15 @@ static struct clk * __init sunxi_factors
(parents[i] = of_clk_get_parent_name(node, i)) != NULL)
i++;
+ /* Nodes should be providing the name via clock-output-names
+ * but originally our dts didn't, and so we used node->name.
+ * The new, better nodes look like clk@deadbeef, so we pull the
+ * name just in this case */
+ if (!strcmp("clk", clk_name)) {
+ of_property_read_string_index(node, "clock-output-names",
+ 0, &clk_name);
+ }
+
factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL);
if (!factors)
return NULL;

145
target/linux/sunxi/patches-3.13/122-1-dt-sun4i-add-mod0.patch
View File

@ -1,145 +0,0 @@
From dda274b6f95902b619af1fb14f26e231bb420371 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Mon, 23 Dec 2013 00:32:41 -0300
Subject: [PATCH] ARM: sun4i: dt: mod0 clocks
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This commit adds all the mod0 clocks present on sun4i to its device tree
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 120 +++++++++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -180,6 +180,126 @@
"apb1_uart4", "apb1_uart5", "apb1_uart6",
"apb1_uart7";
};
+
+ nand_clk: clk@01c20080 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20080 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "nand";
+ };
+
+ ms_clk: clk@01c20084 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20084 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ms";
+ };
+
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc0";
+ };
+
+ mmc1_clk: clk@01c2008c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2008c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc1";
+ };
+
+ mmc2_clk: clk@01c20090 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20090 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc2";
+ };
+
+ mmc3_clk: clk@01c20094 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20094 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc3";
+ };
+
+ ts_clk: clk@01c20098 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20098 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ts";
+ };
+
+ ss_clk: clk@01c2009c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2009c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ss";
+ };
+
+ spi0_clk: clk@01c200a0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi0";
+ };
+
+ spi1_clk: clk@01c200a4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi1";
+ };
+
+ spi2_clk: clk@01c200a8 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a8 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi2";
+ };
+
+ pata_clk: clk@01c200ac {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200ac 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "pata";
+ };
+
+ ir0_clk: clk@01c200b0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200b0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ir0";
+ };
+
+ ir1_clk: clk@01c200b4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200b4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ir1";
+ };
+
+ spi3_clk: clk@01c200d4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200d4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi3";
+ };
};
soc@01c00000 {

213
target/linux/sunxi/patches-3.13/122-2-dt-sun5i-add-mod0.patch
View File

@ -1,213 +0,0 @@
From 9a8d3f21c94099a2bcd79ac1684cc8020fd98df2 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Mon, 23 Dec 2013 00:32:42 -0300
Subject: [PATCH] ARM: sun5i: dt: mod0 clocks
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This commit adds all the mod0 clocks available on A10 and A13. The list
has been constructed by looking at the Allwinner code release for A10S
and A13.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun5i-a10s.dtsi | 88 +++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/sun5i-a13.dtsi | 88 +++++++++++++++++++++++++++++++++++++++
2 files changed, 176 insertions(+)
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -169,6 +169,94 @@
"apb1_i2c2", "apb1_uart0", "apb1_uart1",
"apb1_uart2", "apb1_uart3";
};
+
+ nand_clk: clk@01c20080 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20080 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "nand";
+ };
+
+ ms_clk: clk@01c20084 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20084 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ms";
+ };
+
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc0";
+ };
+
+ mmc1_clk: clk@01c2008c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2008c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc1";
+ };
+
+ mmc2_clk: clk@01c20090 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20090 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc2";
+ };
+
+ ts_clk: clk@01c20098 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20098 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ts";
+ };
+
+ ss_clk: clk@01c2009c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2009c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ss";
+ };
+
+ spi0_clk: clk@01c200a0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi0";
+ };
+
+ spi1_clk: clk@01c200a4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi1";
+ };
+
+ spi2_clk: clk@01c200a8 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a8 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi2";
+ };
+
+ ir0_clk: clk@01c200b0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200b0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ir0";
+ };
};
soc@01c00000 {
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -170,6 +170,94 @@
clock-output-names = "apb1_i2c0", "apb1_i2c1",
"apb1_i2c2", "apb1_uart1", "apb1_uart3";
};
+
+ nand_clk: clk@01c20080 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20080 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "nand";
+ };
+
+ ms_clk: clk@01c20084 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20084 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ms";
+ };
+
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc0";
+ };
+
+ mmc1_clk: clk@01c2008c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2008c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc1";
+ };
+
+ mmc2_clk: clk@01c20090 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20090 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc2";
+ };
+
+ ts_clk: clk@01c20098 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20098 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ts";
+ };
+
+ ss_clk: clk@01c2009c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2009c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ss";
+ };
+
+ spi0_clk: clk@01c200a0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi0";
+ };
+
+ spi1_clk: clk@01c200a4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi1";
+ };
+
+ spi2_clk: clk@01c200a8 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a8 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi2";
+ };
+
+ ir0_clk: clk@01c200b0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200b0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ir0";
+ };
};
soc@01c00000 {

146
target/linux/sunxi/patches-3.13/122-3-dt-sun7i-add-mod0.patch
View File

@ -1,146 +0,0 @@
From d7904e075e3378bec09333b6a3247b3146b3dd91 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Mon, 23 Dec 2013 00:32:43 -0300
Subject: [PATCH] ARM: sun7i: dt: mod0 clocks
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This commit adds all the mod0 clocks available on A20 to its device
tree. This list was created by looking at AW's code release.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 120 +++++++++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -170,6 +170,126 @@
"apb1_uart2", "apb1_uart3", "apb1_uart4",
"apb1_uart5", "apb1_uart6", "apb1_uart7";
};
+
+ nand_clk: clk@01c20080 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20080 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "nand";
+ };
+
+ ms_clk: clk@01c20084 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20084 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ms";
+ };
+
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc0";
+ };
+
+ mmc1_clk: clk@01c2008c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2008c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc1";
+ };
+
+ mmc2_clk: clk@01c20090 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20090 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc2";
+ };
+
+ mmc3_clk: clk@01c20094 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20094 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc3";
+ };
+
+ ts_clk: clk@01c20098 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20098 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ts";
+ };
+
+ ss_clk: clk@01c2009c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2009c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ss";
+ };
+
+ spi0_clk: clk@01c200a0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi0";
+ };
+
+ spi1_clk: clk@01c200a4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi1";
+ };
+
+ spi2_clk: clk@01c200a8 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a8 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi2";
+ };
+
+ pata_clk: clk@01c200ac {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200ac 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "pata";
+ };
+
+ ir0_clk: clk@01c200b0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200b0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ir0";
+ };
+
+ ir1_clk: clk@01c200b4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200b4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ir1";
+ };
+
+ spi3_clk: clk@01c200d4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200d4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi3";
+ };
};
soc@01c00000 {

68
target/linux/sunxi/patches-3.13/123-clk-sunxi-automatic-reparenting.patch
View File

@ -1,68 +0,0 @@
From 04b5b3f9c83c0c0b472c4704d83ec7f56a485a21 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Thu, 5 Sep 2013 19:52:41 -0300
Subject: [PATCH] clk: sunxi: factors: automatic reparenting support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This commit implements .determine_rate, so that our factor clocks can be
reparented when needed.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
---
drivers/clk/sunxi/clk-factors.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
--- a/drivers/clk/sunxi/clk-factors.c
+++ b/drivers/clk/sunxi/clk-factors.c
@@ -77,6 +77,41 @@ static long clk_factors_round_rate(struc
return rate;
}
+static long clk_factors_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_p)
+{
+ struct clk *clk = hw->clk, *parent, *best_parent = NULL;
+ int i, num_parents;
+ unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0;
+
+ /* find the parent that can help provide the fastest rate <= rate */
+ num_parents = __clk_get_num_parents(clk);
+ for (i = 0; i < num_parents; i++) {
+ parent = clk_get_parent_by_index(clk, i);
+ if (!parent)
+ continue;
+ if (__clk_get_flags(clk) & CLK_SET_RATE_PARENT)
+ parent_rate = __clk_round_rate(parent, rate);
+ else
+ parent_rate = __clk_get_rate(parent);
+
+ child_rate = clk_factors_round_rate(hw, rate, &parent_rate);
+
+ if (child_rate <= rate && child_rate > best_child_rate) {
+ best_parent = parent;
+ best = parent_rate;
+ best_child_rate = child_rate;
+ }
+ }
+
+ if (best_parent)
+ *best_parent_p = best_parent;
+ *best_parent_rate = best;
+
+ return best_child_rate;
+}
+
static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
@@ -113,6 +148,7 @@ static int clk_factors_set_rate(struct c
}
const struct clk_ops clk_factors_ops = {
+ .determine_rate = clk_factors_determine_rate,
.recalc_rate = clk_factors_recalc_rate,
.round_rate = clk_factors_round_rate,
.set_rate = clk_factors_set_rate,

31
target/linux/sunxi/patches-3.13/125-dt-sun6i-add-nodes-for-additional-cores.patch
View File

@ -1,31 +0,0 @@
From d3861805e84e1b54073e20dc499b9380b38bb7ab Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Sun, 3 Nov 2013 10:30:12 +0100
Subject: [PATCH] ARM: sun6i: dt: Add IP needed to bring up the additional
cores
Add the PRCM and CPU configuration units needed for SMP in the A31 DTSI.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -322,5 +322,15 @@
#interrupt-cells = <3>;
interrupts = <1 9 0xf04>;
};
+
+ cpucfg@01f01c00 {
+ compatible = "allwinner,sun6i-a31-cpuconfig";
+ reg = <0x01f01c00 0x300>;
+ };
+
+ prcm@01f01c00 {
+ compatible = "allwinner,sun6i-a31-prcm";
+ reg = <0x01f01400 0x200>;
+ };
};
};

58
target/linux/sunxi/patches-3.13/126-dt-sun7i-add-external-clock-outputs.patch
View File

@ -1,58 +0,0 @@
From 0aff0370cbffeadc14456556b904c80e30b3717e Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Wed, 1 Jan 2014 10:30:48 +0800
Subject: [PATCH] ARM: dts: sun7i: external clock outputs
This commit adds the two external clock outputs available on A20 to
its device tree. A dummy fixed factor clock is also added to serve as
the first input of the clock outputs, which according to AW's A20 user
manual, is the 24MHz oscillator divided by 750.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index edad6f1..0d54998 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -303,6 +303,34 @@
clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
clock-output-names = "mbus";
};
+
+ /*
+ * Dummy clock used by output clocks
+ */
+ osc24M_32k: clk@1 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <750>;
+ clock-mult = <1>;
+ clocks = <&osc24M>;
+ clock-output-names = "osc24M_32k";
+ };
+
+ clk_out_a: clk@01c201f0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-out-clk";
+ reg = <0x01c201f0 0x4>;
+ clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
+ clock-output-names = "clk_out_a";
+ };
+
+ clk_out_b: clk@01c201f4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-out-clk";
+ reg = <0x01c201f4 0x4>;
+ clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
+ clock-output-names = "clk_out_b";
+ };
};
soc@01c00000 {
--
1.8.5.5

139
target/linux/sunxi/patches-3.13/127-1-dt-sun4i-rename-clock-node-names.patch
View File

@ -1,139 +0,0 @@
From dfb12c0c35b6cca5e55f40870b65af87988adb3e Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Mon, 3 Feb 2014 09:51:41 +0800
Subject: [PATCH] ARM: dts: sun4i: rename clock node names to clk@N
Device tree naming conventions state that node names should match
node function. Change fully functioning clock nodes to match and
add clock-output-names to all sunxi clock nodes.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 30 ++++++++++++++++++++----------
1 file changed, 20 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 28273f9..26cf191 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -58,34 +58,38 @@
clock-frequency = <0>;
};
- osc24M: osc24M@01c20050 {
+ osc24M: clk@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-osc-clk";
reg = <0x01c20050 0x4>;
clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
};
- osc32k: osc32k {
+ osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
+ clock-output-names = "osc32k";
};
- pll1: pll1@01c20000 {
+ pll1: clk@01c20000 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll1";
};
- pll4: pll4@01c20018 {
+ pll4: clk@01c20018 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-pll1-clk";
reg = <0x01c20018 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll4";
};
- pll5: pll5@01c20020 {
+ pll5: clk@01c20020 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-pll5-clk";
reg = <0x01c20020 0x4>;
@@ -93,7 +97,7 @@
clock-output-names = "pll5_ddr", "pll5_other";
};
- pll6: pll6@01c20028 {
+ pll6: clk@01c20028 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-pll6-clk";
reg = <0x01c20028 0x4>;
@@ -107,6 +111,7 @@
compatible = "allwinner,sun4i-cpu-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+ clock-output-names = "cpu";
};
axi: axi@01c20054 {
@@ -114,9 +119,10 @@
compatible = "allwinner,sun4i-axi-clk";
reg = <0x01c20054 0x4>;
clocks = <&cpu>;
+ clock-output-names = "axi";
};
- axi_gates: axi_gates@01c2005c {
+ axi_gates: clk@01c2005c {
#clock-cells = <1>;
compatible = "allwinner,sun4i-axi-gates-clk";
reg = <0x01c2005c 0x4>;
@@ -129,9 +135,10 @@
compatible = "allwinner,sun4i-ahb-clk";
reg = <0x01c20054 0x4>;
clocks = <&axi>;
+ clock-output-names = "ahb";
};
- ahb_gates: ahb_gates@01c20060 {
+ ahb_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-ahb-gates-clk";
reg = <0x01c20060 0x8>;
@@ -154,9 +161,10 @@
compatible = "allwinner,sun4i-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb>;
+ clock-output-names = "apb0";
};
- apb0_gates: apb0_gates@01c20068 {
+ apb0_gates: clk@01c20068 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-apb0-gates-clk";
reg = <0x01c20068 0x4>;
@@ -171,6 +179,7 @@
compatible = "allwinner,sun4i-apb1-mux-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+ clock-output-names = "apb1_mux";
};
apb1: apb1@01c20058 {
@@ -178,9 +187,10 @@
compatible = "allwinner,sun4i-apb1-clk";
reg = <0x01c20058 0x4>;
clocks = <&apb1_mux>;
+ clock-output-names = "apb1";
};
- apb1_gates: apb1_gates@01c2006c {
+ apb1_gates: clk@01c2006c {
#clock-cells = <1>;
compatible = "allwinner,sun4i-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
--
1.8.5.5

261
target/linux/sunxi/patches-3.13/127-2-dt-sun5i-rename-clock-node-names.patch
View File

@ -1,261 +0,0 @@
From 3dce8324949eaa1ab4b750e8422ce78ddceb7aa4 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Mon, 3 Feb 2014 09:51:42 +0800
Subject: [PATCH] ARM: dts: sun5i: rename clock node names to clk@N
Device tree naming conventions state that node names should match
node function. Change fully functioning clock nodes to match and
add clock-output-names to all sunxi clock nodes.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun5i-a10s.dtsi | 30 ++++++++++++++++++++----------
arch/arm/boot/dts/sun5i-a13.dtsi | 30 ++++++++++++++++++++----------
2 files changed, 40 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 2318082..b114be7 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -51,34 +51,38 @@
clock-frequency = <0>;
};
- osc24M: osc24M@01c20050 {
+ osc24M: clk@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-osc-clk";
reg = <0x01c20050 0x4>;
clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
};
- osc32k: osc32k {
+ osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
+ clock-output-names = "osc32k";
};
- pll1: pll1@01c20000 {
+ pll1: clk@01c20000 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll1";
};
- pll4: pll4@01c20018 {
+ pll4: clk@01c20018 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-pll1-clk";
reg = <0x01c20018 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll4";
};
- pll5: pll5@01c20020 {
+ pll5: clk@01c20020 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-pll5-clk";
reg = <0x01c20020 0x4>;
@@ -86,7 +90,7 @@
clock-output-names = "pll5_ddr", "pll5_other";
};
- pll6: pll6@01c20028 {
+ pll6: clk@01c20028 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-pll6-clk";
reg = <0x01c20028 0x4>;
@@ -100,6 +104,7 @@
compatible = "allwinner,sun4i-cpu-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+ clock-output-names = "cpu";
};
axi: axi@01c20054 {
@@ -107,9 +112,10 @@
compatible = "allwinner,sun4i-axi-clk";
reg = <0x01c20054 0x4>;
clocks = <&cpu>;
+ clock-output-names = "axi";
};
- axi_gates: axi_gates@01c2005c {
+ axi_gates: clk@01c2005c {
#clock-cells = <1>;
compatible = "allwinner,sun4i-axi-gates-clk";
reg = <0x01c2005c 0x4>;
@@ -122,9 +128,10 @@
compatible = "allwinner,sun4i-ahb-clk";
reg = <0x01c20054 0x4>;
clocks = <&axi>;
+ clock-output-names = "ahb";
};
- ahb_gates: ahb_gates@01c20060 {
+ ahb_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
reg = <0x01c20060 0x8>;
@@ -143,9 +150,10 @@
compatible = "allwinner,sun4i-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb>;
+ clock-output-names = "apb0";
};
- apb0_gates: apb0_gates@01c20068 {
+ apb0_gates: clk@01c20068 {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
reg = <0x01c20068 0x4>;
@@ -159,6 +167,7 @@
compatible = "allwinner,sun4i-apb1-mux-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+ clock-output-names = "apb1_mux";
};
apb1: apb1@01c20058 {
@@ -166,9 +175,10 @@
compatible = "allwinner,sun4i-apb1-clk";
reg = <0x01c20058 0x4>;
clocks = <&apb1_mux>;
+ clock-output-names = "apb1";
};
- apb1_gates: apb1_gates@01c2006c {
+ apb1_gates: clk@01c2006c {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 6de40b6..5c121fc 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -52,34 +52,38 @@
clock-frequency = <0>;
};
- osc24M: osc24M@01c20050 {
+ osc24M: clk@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-osc-clk";
reg = <0x01c20050 0x4>;
clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
};
- osc32k: osc32k {
+ osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
+ clock-output-names = "osc32k";
};
- pll1: pll1@01c20000 {
+ pll1: clk@01c20000 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll1";
};
- pll4: pll4@01c20018 {
+ pll4: clk@01c20018 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-pll1-clk";
reg = <0x01c20018 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll4";
};
- pll5: pll5@01c20020 {
+ pll5: clk@01c20020 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-pll5-clk";
reg = <0x01c20020 0x4>;
@@ -87,7 +91,7 @@
clock-output-names = "pll5_ddr", "pll5_other";
};
- pll6: pll6@01c20028 {
+ pll6: clk@01c20028 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-pll6-clk";
reg = <0x01c20028 0x4>;
@@ -101,6 +105,7 @@
compatible = "allwinner,sun4i-cpu-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+ clock-output-names = "cpu";
};
axi: axi@01c20054 {
@@ -108,9 +113,10 @@
compatible = "allwinner,sun4i-axi-clk";
reg = <0x01c20054 0x4>;
clocks = <&cpu>;
+ clock-output-names = "axi";
};
- axi_gates: axi_gates@01c2005c {
+ axi_gates: clk@01c2005c {
#clock-cells = <1>;
compatible = "allwinner,sun4i-axi-gates-clk";
reg = <0x01c2005c 0x4>;
@@ -123,9 +129,10 @@
compatible = "allwinner,sun4i-ahb-clk";
reg = <0x01c20054 0x4>;
clocks = <&axi>;
+ clock-output-names = "ahb";
};
- ahb_gates: ahb_gates@01c20060 {
+ ahb_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a13-ahb-gates-clk";
reg = <0x01c20060 0x8>;
@@ -143,9 +150,10 @@
compatible = "allwinner,sun4i-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb>;
+ clock-output-names = "apb0";
};
- apb0_gates: apb0_gates@01c20068 {
+ apb0_gates: clk@01c20068 {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a13-apb0-gates-clk";
reg = <0x01c20068 0x4>;
@@ -158,6 +166,7 @@
compatible = "allwinner,sun4i-apb1-mux-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+ clock-output-names = "apb1_mux";
};
apb1: apb1@01c20058 {
@@ -165,9 +174,10 @@
compatible = "allwinner,sun4i-apb1-clk";
reg = <0x01c20058 0x4>;
clocks = <&apb1_mux>;
+ clock-output-names = "apb1";
};
- apb1_gates: apb1_gates@01c2006c {
+ apb1_gates: clk@01c2006c {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a13-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
--
1.8.5.5

112
target/linux/sunxi/patches-3.13/127-3-dt-sun6i-rename-clock-node-names.patch
View File

@ -1,112 +0,0 @@
From 5cd0fa24e51d342f175d31ecb72c2e957a6bd0af Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Mon, 3 Feb 2014 09:51:43 +0800
Subject: [PATCH] ARM: dts: sun6i: rename clock node names to clk@N
Device tree naming conventions state that node names should match
node function. Change fully functioning clock nodes to match and
add clock-output-names to all sunxi clock nodes.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index fc07f70..d3f1995 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -70,17 +70,19 @@
clock-frequency = <24000000>;
};
- osc32k: osc32k {
+ osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
+ clock-output-names = "osc32k";
};
- pll1: pll1@01c20000 {
+ pll1: clk@01c20000 {
#clock-cells = <0>;
compatible = "allwinner,sun6i-a31-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll1";
};
pll6: clk@01c20028 {
@@ -103,6 +105,7 @@
* Allwinner.
*/
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+ clock-output-names = "cpu";
};
axi: axi@01c20050 {
@@ -110,6 +113,7 @@
compatible = "allwinner,sun4i-axi-clk";
reg = <0x01c20050 0x4>;
clocks = <&cpu>;
+ clock-output-names = "axi";
};
ahb1_mux: ahb1_mux@01c20054 {
@@ -117,6 +121,7 @@
compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
+ clock-output-names = "ahb1_mux";
};
ahb1: ahb1@01c20054 {
@@ -124,9 +129,10 @@
compatible = "allwinner,sun4i-ahb-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb1_mux>;
+ clock-output-names = "ahb1";
};
- ahb1_gates: ahb1_gates@01c20060 {
+ ahb1_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
reg = <0x01c20060 0x8>;
@@ -152,9 +158,10 @@
compatible = "allwinner,sun4i-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb1>;
+ clock-output-names = "apb1";
};
- apb1_gates: apb1_gates@01c20060 {
+ apb1_gates: clk@01c20068 {
#clock-cells = <1>;
compatible = "allwinner,sun6i-a31-apb1-gates-clk";
reg = <0x01c20068 0x4>;
@@ -169,6 +176,7 @@
compatible = "allwinner,sun4i-apb1-mux-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+ clock-output-names = "apb2_mux";
};
apb2: apb2@01c20058 {
@@ -176,9 +184,10 @@
compatible = "allwinner,sun6i-a31-apb2-div-clk";
reg = <0x01c20058 0x4>;
clocks = <&apb2_mux>;
+ clock-output-names = "apb2";
};
- apb2_gates: apb2_gates@01c2006c {
+ apb2_gates: clk@01c2006c {
#clock-cells = <1>;
compatible = "allwinner,sun6i-a31-apb2-gates-clk";
reg = <0x01c2006c 0x4>;
--
1.8.5.5

132
target/linux/sunxi/patches-3.13/127-4-dt-sun7i-rename-clock-node-names.patch
View File

@ -1,132 +0,0 @@
From cb6050998de262d5acf2207c5451d4f5995a5bff Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Mon, 3 Feb 2014 09:51:44 +0800
Subject: [PATCH] ARM: dts: sun7i: rename clock node names to clk@N
Device tree naming conventions state that node names should match
node function. Change fully functioning clock nodes to match and
add clock-output-names to all sunxi clock nodes.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index fe0fe47..cefd7ac 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -54,11 +54,12 @@
#size-cells = <1>;
ranges;
- osc24M: osc24M@01c20050 {
+ osc24M: clk@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-osc-clk";
reg = <0x01c20050 0x4>;
clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
};
osc32k: clk@0 {
@@ -68,21 +69,23 @@
clock-output-names = "osc32k";
};
- pll1: pll1@01c20000 {
+ pll1: clk@01c20000 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll1";
};
- pll4: pll4@01c20018 {
+ pll4: clk@01c20018 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-pll1-clk";
reg = <0x01c20018 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll4";
};
- pll5: pll5@01c20020 {
+ pll5: clk@01c20020 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-pll5-clk";
reg = <0x01c20020 0x4>;
@@ -90,7 +93,7 @@
clock-output-names = "pll5_ddr", "pll5_other";
};
- pll6: pll6@01c20028 {
+ pll6: clk@01c20028 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-pll6-clk";
reg = <0x01c20028 0x4>;
@@ -103,6 +106,7 @@
compatible = "allwinner,sun4i-cpu-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
+ clock-output-names = "cpu";
};
axi: axi@01c20054 {
@@ -110,6 +114,7 @@
compatible = "allwinner,sun4i-axi-clk";
reg = <0x01c20054 0x4>;
clocks = <&cpu>;
+ clock-output-names = "axi";
};
ahb: ahb@01c20054 {
@@ -117,9 +122,10 @@
compatible = "allwinner,sun4i-ahb-clk";
reg = <0x01c20054 0x4>;
clocks = <&axi>;
+ clock-output-names = "ahb";
};
- ahb_gates: ahb_gates@01c20060 {
+ ahb_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun7i-a20-ahb-gates-clk";
reg = <0x01c20060 0x8>;
@@ -144,9 +150,10 @@
compatible = "allwinner,sun4i-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb>;
+ clock-output-names = "apb0";
};
- apb0_gates: apb0_gates@01c20068 {
+ apb0_gates: clk@01c20068 {
#clock-cells = <1>;
compatible = "allwinner,sun7i-a20-apb0-gates-clk";
reg = <0x01c20068 0x4>;
@@ -162,6 +169,7 @@
compatible = "allwinner,sun4i-apb1-mux-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+ clock-output-names = "apb1_mux";
};
apb1: apb1@01c20058 {
@@ -169,9 +177,10 @@
compatible = "allwinner,sun4i-apb1-clk";
reg = <0x01c20058 0x4>;
clocks = <&apb1_mux>;
+ clock-output-names = "apb1";
};
- apb1_gates: apb1_gates@01c2006c {
+ apb1_gates: clk@01c2006c {
#clock-cells = <1>;
compatible = "allwinner,sun7i-a20-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
--
1.8.5.5

70
target/linux/sunxi/patches-3.13/128-dt-sunxi-add-mbusclk.patch
View File

@ -1,70 +0,0 @@
From 538d4a6ca5f41039d906f28be82e0f4d26ec8ac9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Mon, 23 Dec 2013 00:32:44 -0300
Subject: [PATCH] ARM: sunxi: dt: add nodes for the mbus clock
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
mbus is the memory bus clock, and it is present on both sun5i and sun7i
machines. Its register layout is compatible with the mod0 one.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun5i-a10s.dtsi | 8 ++++++++
arch/arm/boot/dts/sun5i-a13.dtsi | 8 ++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
3 files changed, 24 insertions(+)
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -257,6 +257,14 @@
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ir0";
};
+
+ mbus_clk: clk@01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2015c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mbus";
+ };
};
soc@01c00000 {
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -258,6 +258,14 @@
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ir0";
};
+
+ mbus_clk: clk@01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2015c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mbus";
+ };
};
soc@01c00000 {
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -290,6 +290,14 @@
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi3";
};
+
+ mbus_clk: clk@01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2015c 0x4>;
+ clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
+ clock-output-names = "mbus";
+ };
};
soc@01c00000 {

60
target/linux/sunxi/patches-3.13/130-1-dt-sunxi-add-emac-aliases.patch
View File

@ -1,60 +0,0 @@
From 2af807481169af627dc63f98b773c33d85020658 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Fri, 15 Nov 2013 15:26:44 -0300
Subject: [PATCH] ARM: sunxi: dt: add EMAC aliases
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
U-Boot uses the ethernet0 alias to locate the right node to fill in
the MAC address of the first ethernet interface. This patch adds the
alias on all the sunxi SoCs with EMAC. In this way, people using
ethernet in U-Boot (eg, for tftp) can keep a consistent address on both
U-Boot and Linux with no additional effort.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 4 ++++
arch/arm/boot/dts/sun5i-a10s.dtsi | 4 ++++
arch/arm/boot/dts/sun7i-a20.dtsi | 4 ++++
3 files changed, 12 insertions(+)
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -15,6 +15,10 @@
/ {
interrupt-parent = <&intc>;
+ aliases {
+ ethernet0 = &emac;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -16,6 +16,10 @@
/ {
interrupt-parent = <&intc>;
+ aliases {
+ ethernet0 = &emac;
+ };
+
cpus {
cpu@0 {
compatible = "arm,cortex-a8";
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -16,6 +16,10 @@
/ {
interrupt-parent = <&gic>;
+ aliases {
+ ethernet0 = &emac;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;

25
target/linux/sunxi/patches-3.13/130-2-dt-sun7i-update-eth-aliases.patch
View File

@ -1,25 +0,0 @@
From dfd4430579f5e53324c00e9e21fb0929bb46542c Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Sat, 7 Dec 2013 01:29:43 +0800
Subject: [PATCH] ARM: dts: sun7i: Add ethernet alias for GMAC
U-Boot will insert MAC address into the device tree image.
It looks up ethernet[0-5] aliases to find the ethernet nodes.
Alias GMAC as ethernet0, as it is the only ethernet controller used.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -17,7 +17,7 @@
interrupt-parent = <&gic>;
aliases {
- ethernet0 = &emac;
+ ethernet0 = &gmac;
};
cpus {

38
target/linux/sunxi/patches-3.13/131-dt-sun7i-add-arch-timers.patch
View File

@ -1,38 +0,0 @@
From fdc4530902ed845fc0f31b9bbcc45e05fefe21da Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sun, 1 Dec 2013 22:40:34 +0100
Subject: [PATCH] ARM: dts: sun7i: Add arch timers
Note this requires a new enough uboot, otherwise things won't work, ie:
https://github.com/jwrdegoede/u-boot-sunxi/commits/sunxi-next
or:
http://xenbits.xen.org/gitweb/?p=people/ianc/u-boot.git;a=shortlog;h=refs/heads/devel/sunxi-psci
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index f4ecd79..fa2ef07 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -370,6 +370,14 @@
};
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ };
+
soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
--
1.8.5.5

108
target/linux/sunxi/patches-3.13/132-dt-sun5i-a13-add-olinuxino-micro.patch
View File

@ -1,108 +0,0 @@
From aad62992a2921436ec7c054f8b80bc916b8cc9d7 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sat, 14 Dec 2013 16:26:17 +0100
Subject: [PATCH] ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board
The A13-OLinuXino-MICRO is a small dev-board with the Allwinner A13 SoC:
https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino-MICRO/
Features:
A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU
256 MB RAM (128Mbit x 16)
5VDC input power supply with own ICs, noise immune design
1 USB host
1 USB OTG which can power the board
SD-card connector for booting the Linux image
VGA video output
LCD signals available on connector so you still can use LCD if you disable VGA/HDMI
Audio output
Microphone input pads (no connector)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 68 +++++++++++++++++++++++++
2 files changed, 69 insertions(+)
create mode 100644 arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -255,6 +255,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
sun4i-a10-hackberry.dtb \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a13-olinuxino.dtb \
+ sun5i-a13-olinuxino-micro.dtb \
sun6i-a31-colombus.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun5i-a13.dtsi"
+
+/ {
+ model = "Olimex A13-Olinuxino Micro";
+ compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
+
+ soc@01c00000 {
+ pinctrl@01c20800 {
+ led_pins_olinuxinom: led_pins@0 {
+ allwinner,pins = "PG9";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <1>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ uart1: serial@01c28400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
+ status = "okay";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+ };
+
+ i2c1: i2c@01c2b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+ };
+
+ i2c2: i2c@01c2b400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxinom>;
+
+ power {
+ label = "a13-olinuxino-micro:green:power";
+ gpios = <&pio 6 9 0>;
+ default-state = "on";
+ };
+ };
+};

570
target/linux/sunxi/patches-3.13/140-sun47i-rtc-driver.patch
View File

@ -1,570 +0,0 @@
From c6890cadc2129a07d69f3dcbfca66522c27b8069 Mon Sep 17 00:00:00 2001
From: Carlo Caione <carlo.caione@gmail.com>
Date: Sat, 16 Nov 2013 18:33:54 +0100
Subject: [PATCH] ARM: sun4i/sun7i: RTC driver
This patch introduces the driver for the RTC in the Allwinner A10 and
A20 SoCs.
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/rtc/Kconfig | 7 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-sunxi.c | 523 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 531 insertions(+)
create mode 100644 drivers/rtc/rtc-sunxi.c
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1122,6 +1122,13 @@ config RTC_DRV_SUN4V
If you say Y here you will get support for the Hypervisor
based RTC on SUN4V systems.
+config RTC_DRV_SUNXI
+ tristate "Allwinner sun4i/sun7i RTC"
+ depends on ARCH_SUNXI
+ help
+ If you say Y here you will get support for the RTC found on
+ Allwinner A10/A20.
+
config RTC_DRV_STARFIRE
bool "Starfire RTC"
depends on SPARC64
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -119,6 +119,7 @@ obj-$(CONFIG_RTC_DRV_STARFIRE) += rtc-st
obj-$(CONFIG_RTC_DRV_STK17TA8) += rtc-stk17ta8.o
obj-$(CONFIG_RTC_DRV_STMP) += rtc-stmp3xxx.o
obj-$(CONFIG_RTC_DRV_SUN4V) += rtc-sun4v.o
+obj-$(CONFIG_RTC_DRV_SUNXI) += rtc-sunxi.o
obj-$(CONFIG_RTC_DRV_TEGRA) += rtc-tegra.o
obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
obj-$(CONFIG_RTC_DRV_TILE) += rtc-tile.o
--- /dev/null
+++ b/drivers/rtc/rtc-sunxi.c
@@ -0,0 +1,523 @@
+/*
+ * An RTC driver for Allwinner A10/A20
+ *
+ * Copyright (c) 2013, Carlo Caione <carlo.caione@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/types.h>
+
+#define SUNXI_LOSC_CTRL 0x0000
+#define SUNXI_LOSC_CTRL_RTC_HMS_ACC BIT(8)
+#define SUNXI_LOSC_CTRL_RTC_YMD_ACC BIT(7)
+
+#define SUNXI_RTC_YMD 0x0004
+
+#define SUNXI_RTC_HMS 0x0008
+
+#define SUNXI_ALRM_DHMS 0x000c
+
+#define SUNXI_ALRM_EN 0x0014
+#define SUNXI_ALRM_EN_CNT_EN BIT(8)
+
+#define SUNXI_ALRM_IRQ_EN 0x0018
+#define SUNXI_ALRM_IRQ_EN_CNT_IRQ_EN BIT(0)
+
+#define SUNXI_ALRM_IRQ_STA 0x001c
+#define SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND BIT(0)
+
+#define SUNXI_MASK_DH 0x0000001f
+#define SUNXI_MASK_SM 0x0000003f
+#define SUNXI_MASK_M 0x0000000f
+#define SUNXI_MASK_LY 0x00000001
+#define SUNXI_MASK_D 0x00000ffe
+#define SUNXI_MASK_M 0x0000000f
+
+#define SUNXI_GET(x, mask, shift) (((x) & ((mask) << (shift))) \
+ >> (shift))
+
+#define SUNXI_SET(x, mask, shift) (((x) & (mask)) << (shift))
+
+/*
+ * Get date values
+ */
+#define SUNXI_DATE_GET_DAY_VALUE(x) SUNXI_GET(x, SUNXI_MASK_DH, 0)
+#define SUNXI_DATE_GET_MON_VALUE(x) SUNXI_GET(x, SUNXI_MASK_M, 8)
+#define SUNXI_DATE_GET_YEAR_VALUE(x, mask) SUNXI_GET(x, mask, 16)
+
+/*
+ * Get time values
+ */
+#define SUNXI_TIME_GET_SEC_VALUE(x) SUNXI_GET(x, SUNXI_MASK_SM, 0)
+#define SUNXI_TIME_GET_MIN_VALUE(x) SUNXI_GET(x, SUNXI_MASK_SM, 8)
+#define SUNXI_TIME_GET_HOUR_VALUE(x) SUNXI_GET(x, SUNXI_MASK_DH, 16)
+
+/*
+ * Get alarm values
+ */
+#define SUNXI_ALRM_GET_SEC_VALUE(x) SUNXI_GET(x, SUNXI_MASK_SM, 0)
+#define SUNXI_ALRM_GET_MIN_VALUE(x) SUNXI_GET(x, SUNXI_MASK_SM, 8)
+#define SUNXI_ALRM_GET_HOUR_VALUE(x) SUNXI_GET(x, SUNXI_MASK_DH, 16)
+
+/*
+ * Set date values
+ */
+#define SUNXI_DATE_SET_DAY_VALUE(x) SUNXI_DATE_GET_DAY_VALUE(x)
+#define SUNXI_DATE_SET_MON_VALUE(x) SUNXI_SET(x, SUNXI_MASK_M, 8)
+#define SUNXI_DATE_SET_YEAR_VALUE(x, mask) SUNXI_SET(x, mask, 16)
+#define SUNXI_LEAP_SET_VALUE(x, shift) SUNXI_SET(x, SUNXI_MASK_LY, shift)
+
+/*
+ * Set time values
+ */
+#define SUNXI_TIME_SET_SEC_VALUE(x) SUNXI_TIME_GET_SEC_VALUE(x)
+#define SUNXI_TIME_SET_MIN_VALUE(x) SUNXI_SET(x, SUNXI_MASK_SM, 8)
+#define SUNXI_TIME_SET_HOUR_VALUE(x) SUNXI_SET(x, SUNXI_MASK_DH, 16)
+
+/*
+ * Set alarm values
+ */
+#define SUNXI_ALRM_SET_SEC_VALUE(x) SUNXI_ALRM_GET_SEC_VALUE(x)
+#define SUNXI_ALRM_SET_MIN_VALUE(x) SUNXI_SET(x, SUNXI_MASK_SM, 8)
+#define SUNXI_ALRM_SET_HOUR_VALUE(x) SUNXI_SET(x, SUNXI_MASK_DH, 16)
+#define SUNXI_ALRM_SET_DAY_VALUE(x) SUNXI_SET(x, SUNXI_MASK_D, 21)
+
+/*
+ * Time unit conversions
+ */
+#define SEC_IN_MIN 60
+#define SEC_IN_HOUR (60 * SEC_IN_MIN)
+#define SEC_IN_DAY (24 * SEC_IN_HOUR)
+
+/*
+ * The year parameter passed to the driver is usually an offset relative to
+ * the year 1900. This macro is used to convert this offset to another one
+ * relative to the minimum year allowed by the hardware.
+ */
+#define SUNXI_YEAR_OFF(x) ((x)->min - 1900)
+
+/*
+ * min and max year are arbitrary set considering the limited range of the
+ * hardware register field
+ */
+struct sunxi_rtc_data_year {
+ unsigned int min; /* min year allowed */
+ unsigned int max; /* max year allowed */
+ unsigned int mask; /* mask for the year field */
+ unsigned char leap_shift; /* bit shift to get the leap year */
+};
+
+static struct sunxi_rtc_data_year data_year_param[] = {
+ [0] = {
+ .min = 2010,
+ .max = 2073,
+ .mask = 0x3f,
+ .leap_shift = 22,
+ },
+ [1] = {
+ .min = 1970,
+ .max = 2225,
+ .mask = 0xff,
+ .leap_shift = 24,
+ },
+};
+
+struct sunxi_rtc_dev {
+ struct rtc_device *rtc;
+ struct device *dev;
+ struct sunxi_rtc_data_year *data_year;
+ void __iomem *base;
+ int irq;
+};
+
+static irqreturn_t sunxi_rtc_alarmirq(int irq, void *id)
+{
+ struct sunxi_rtc_dev *chip = (struct sunxi_rtc_dev *) id;
+ u32 val;
+
+ val = readl(chip->base + SUNXI_ALRM_IRQ_STA);
+
+ if (val & SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND) {
+ val |= SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND;
+ writel(val, chip->base + SUNXI_ALRM_IRQ_STA);
+
+ rtc_update_irq(chip->rtc, 1, RTC_AF | RTC_IRQF);
+
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+static void sunxi_rtc_setaie(int to, struct sunxi_rtc_dev *chip)
+{
+ u32 alrm_val = 0;
+ u32 alrm_irq_val = 0;
+
+ if (to) {
+ alrm_val = readl(chip->base + SUNXI_ALRM_EN);
+ alrm_val |= SUNXI_ALRM_EN_CNT_EN;
+
+ alrm_irq_val = readl(chip->base + SUNXI_ALRM_IRQ_EN);
+ alrm_irq_val |= SUNXI_ALRM_IRQ_EN_CNT_IRQ_EN;
+ } else {
+ writel(SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND,
+ chip->base + SUNXI_ALRM_IRQ_STA);
+ }
+
+ writel(alrm_val, chip->base + SUNXI_ALRM_EN);
+ writel(alrm_irq_val, chip->base + SUNXI_ALRM_IRQ_EN);
+}
+
+static int sunxi_rtc_getalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+ struct sunxi_rtc_dev *chip = dev_get_drvdata(dev);
+ struct rtc_time *alrm_tm = &wkalrm->time;
+ u32 alrm;
+ u32 alrm_en;
+ u32 date;
+
+ alrm = readl(chip->base + SUNXI_ALRM_DHMS);
+ date = readl(chip->base + SUNXI_RTC_YMD);
+
+ alrm_tm->tm_sec = SUNXI_ALRM_GET_SEC_VALUE(alrm);
+ alrm_tm->tm_min = SUNXI_ALRM_GET_MIN_VALUE(alrm);
+ alrm_tm->tm_hour = SUNXI_ALRM_GET_HOUR_VALUE(alrm);
+
+ alrm_tm->tm_mday = SUNXI_DATE_GET_DAY_VALUE(date);
+ alrm_tm->tm_mon = SUNXI_DATE_GET_MON_VALUE(date);
+ alrm_tm->tm_year = SUNXI_DATE_GET_YEAR_VALUE(date,
+ chip->data_year->mask);
+
+ alrm_tm->tm_mon -= 1;
+
+ /*
+ * switch from (data_year->min)-relative offset to
+ * a (1900)-relative one
+ */
+ alrm_tm->tm_year += SUNXI_YEAR_OFF(chip->data_year);
+
+ alrm_en = readl(chip->base + SUNXI_ALRM_IRQ_EN);
+ if (alrm_en & SUNXI_ALRM_EN_CNT_EN)
+ wkalrm->enabled = 1;
+
+ return 0;
+}
+
+static int sunxi_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
+{
+ struct sunxi_rtc_dev *chip = dev_get_drvdata(dev);
+ u32 date, time;
+
+ /*
+ * read again in case it changes
+ */
+ do {
+ date = readl(chip->base + SUNXI_RTC_YMD);
+ time = readl(chip->base + SUNXI_RTC_HMS);
+ } while ((date != readl(chip->base + SUNXI_RTC_YMD)) ||
+ (time != readl(chip->base + SUNXI_RTC_HMS)));
+
+ rtc_tm->tm_sec = SUNXI_TIME_GET_SEC_VALUE(time);
+ rtc_tm->tm_min = SUNXI_TIME_GET_MIN_VALUE(time);
+ rtc_tm->tm_hour = SUNXI_TIME_GET_HOUR_VALUE(time);
+
+ rtc_tm->tm_mday = SUNXI_DATE_GET_DAY_VALUE(date);
+ rtc_tm->tm_mon = SUNXI_DATE_GET_MON_VALUE(date);
+ rtc_tm->tm_year = SUNXI_DATE_GET_YEAR_VALUE(date,
+ chip->data_year->mask);
+
+ rtc_tm->tm_mon -= 1;
+
+ /*
+ * switch from (data_year->min)-relative offset to
+ * a (1900)-relative one
+ */
+ rtc_tm->tm_year += SUNXI_YEAR_OFF(chip->data_year);
+
+ return rtc_valid_tm(rtc_tm);
+}
+
+static int sunxi_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+ struct sunxi_rtc_dev *chip = dev_get_drvdata(dev);
+ struct rtc_time *alrm_tm = &wkalrm->time;
+ struct rtc_time tm_now;
+ u32 alrm = 0;
+ unsigned long time_now = 0;
+ unsigned long time_set = 0;
+ unsigned long time_gap = 0;
+ unsigned long time_gap_day = 0;
+ unsigned long time_gap_hour = 0;
+ unsigned long time_gap_min = 0;
+ int ret = 0;
+
+ ret = sunxi_rtc_gettime(dev, &tm_now);
+ if (ret < 0) {
+ dev_err(dev, "Error in getting time\n");
+ return -EINVAL;
+ }
+
+ rtc_tm_to_time(alrm_tm, &time_set);
+ rtc_tm_to_time(&tm_now, &time_now);
+ if (time_set <= time_now) {
+ dev_err(dev, "Date to set in the past\n");
+ return -EINVAL;
+ }
+
+ time_gap = time_set - time_now;
+ time_gap_day = time_gap / SEC_IN_DAY;
+ time_gap -= time_gap_day * SEC_IN_DAY;
+ time_gap_hour = time_gap / SEC_IN_HOUR;
+ time_gap -= time_gap_hour * SEC_IN_HOUR;
+ time_gap_min = time_gap / SEC_IN_MIN;
+ time_gap -= time_gap_min * SEC_IN_MIN;
+
+ if (time_gap_day > 255) {
+ dev_err(dev, "Day must be in the range 0 - 255\n");
+ return -EINVAL;
+ }
+
+ sunxi_rtc_setaie(0, chip);
+ writel(0, chip->base + SUNXI_ALRM_DHMS);
+ usleep_range(100, 300);
+
+ alrm = SUNXI_ALRM_SET_SEC_VALUE(time_gap) |
+ SUNXI_ALRM_SET_MIN_VALUE(time_gap_min) |
+ SUNXI_ALRM_SET_HOUR_VALUE(time_gap_hour) |
+ SUNXI_ALRM_SET_DAY_VALUE(time_gap_day);
+ writel(alrm, chip->base + SUNXI_ALRM_DHMS);
+
+ writel(0, chip->base + SUNXI_ALRM_IRQ_EN);
+ writel(SUNXI_ALRM_IRQ_EN_CNT_IRQ_EN, chip->base + SUNXI_ALRM_IRQ_EN);
+
+ sunxi_rtc_setaie(wkalrm->enabled, chip);
+
+ return 0;
+}
+
+static int sunxi_rtc_wait(struct sunxi_rtc_dev *chip, int offset,
+ unsigned int mask, unsigned int ms_timeout)
+{
+ const unsigned long timeout = jiffies + msecs_to_jiffies(ms_timeout);
+ u32 reg;
+
+ do {
+ reg = readl(chip->base + offset);
+ reg &= mask;
+
+ if (reg == mask)
+ return 0;
+
+ } while (time_before(jiffies, timeout));
+
+ return -ETIMEDOUT;
+}
+
+static int sunxi_rtc_settime(struct device *dev, struct rtc_time *rtc_tm)
+{
+ struct sunxi_rtc_dev *chip = dev_get_drvdata(dev);
+ u32 date = 0;
+ u32 time = 0;
+ int year;
+
+ /*
+ * the input rtc_tm->tm_year is the offset relative to 1900. We use
+ * the SUNXI_YEAR_OFF macro to rebase it with respect to the min year
+ * allowed by the hardware
+ */
+
+ year = rtc_tm->tm_year + 1900;
+ if (year < chip->data_year->min || year > chip->data_year->max) {
+ dev_err(dev, "rtc only supports year in range %d - %d\n",
+ chip->data_year->min, chip->data_year->max);
+ return -EINVAL;
+ }
+
+ rtc_tm->tm_year -= SUNXI_YEAR_OFF(chip->data_year);
+ rtc_tm->tm_mon += 1;
+
+ date = SUNXI_DATE_SET_DAY_VALUE(rtc_tm->tm_mday) |
+ SUNXI_DATE_SET_MON_VALUE(rtc_tm->tm_mon) |
+ SUNXI_DATE_SET_YEAR_VALUE(rtc_tm->tm_year,
+ chip->data_year->mask);
+
+ if (is_leap_year(year))
+ date |= SUNXI_LEAP_SET_VALUE(1, chip->data_year->leap_shift);
+
+ time = SUNXI_TIME_SET_SEC_VALUE(rtc_tm->tm_sec) |
+ SUNXI_TIME_SET_MIN_VALUE(rtc_tm->tm_min) |
+ SUNXI_TIME_SET_HOUR_VALUE(rtc_tm->tm_hour);
+
+ writel(0, chip->base + SUNXI_RTC_HMS);
+ writel(0, chip->base + SUNXI_RTC_YMD);
+
+ writel(time, chip->base + SUNXI_RTC_HMS);
+
+ /*
+ * After writing the RTC HH-MM-SS register, the
+ * SUNXI_LOSC_CTRL_RTC_HMS_ACC bit is set and it will not
+ * be cleared until the real writing operation is finished
+ */
+
+ if (sunxi_rtc_wait(chip, SUNXI_LOSC_CTRL,
+ SUNXI_LOSC_CTRL_RTC_HMS_ACC, 50)) {
+ dev_err(dev, "Failed to set rtc time.\n");
+ return -1;
+ }
+
+ writel(date, chip->base + SUNXI_RTC_YMD);
+
+ /*
+ * After writing the RTC YY-MM-DD register, the
+ * SUNXI_LOSC_CTRL_RTC_YMD_ACC bit is set and it will not
+ * be cleared until the real writing operation is finished
+ */
+
+ if (sunxi_rtc_wait(chip, SUNXI_LOSC_CTRL,
+ SUNXI_LOSC_CTRL_RTC_YMD_ACC, 50)) {
+ dev_err(dev, "Failed to set rtc time.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int sunxi_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct sunxi_rtc_dev *chip = dev_get_drvdata(dev);
+
+ if (!enabled)
+ sunxi_rtc_setaie(enabled, chip);
+
+ return 0;
+}
+
+static const struct rtc_class_ops sunxi_rtc_ops = {
+ .read_time = sunxi_rtc_gettime,
+ .set_time = sunxi_rtc_settime,
+ .read_alarm = sunxi_rtc_getalarm,
+ .set_alarm = sunxi_rtc_setalarm,
+ .alarm_irq_enable = sunxi_rtc_alarm_irq_enable
+};
+
+static const struct of_device_id sunxi_rtc_dt_ids[] = {
+ { .compatible = "allwinner,sun4i-rtc", .data = &data_year_param[0] },
+ { .compatible = "allwinner,sun7i-a20-rtc", .data = &data_year_param[1] },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, sunxi_rtc_dt_ids);
+
+static int sunxi_rtc_probe(struct platform_device *pdev)
+{
+ struct sunxi_rtc_dev *chip;
+ struct resource *res;
+ const struct of_device_id *of_id;
+ int ret;
+
+ chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, chip);
+ chip->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ chip->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(chip->base))
+ return PTR_ERR(chip->base);
+
+ chip->irq = platform_get_irq(pdev, 0);
+ if (chip->irq < 0) {
+ dev_err(&pdev->dev, "No IRQ resource\n");
+ return chip->irq;
+ }
+ ret = devm_request_irq(&pdev->dev, chip->irq, sunxi_rtc_alarmirq,
+ 0, dev_name(&pdev->dev), chip);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not request IRQ\n");
+ return ret;
+ }
+
+ of_id = of_match_device(sunxi_rtc_dt_ids, &pdev->dev);
+ if (!of_id) {
+ dev_err(&pdev->dev, "Unable to setup RTC data\n");
+ return -ENODEV;
+ }
+ chip->data_year = (struct sunxi_rtc_data_year *) of_id->data;
+
+ /* clear the alarm count value */
+ writel(0, chip->base + SUNXI_ALRM_DHMS);
+
+ /* disable alarm, not generate irq pending */
+ writel(0, chip->base + SUNXI_ALRM_EN);
+
+ /* disable alarm week/cnt irq, unset to cpu */
+ writel(0, chip->base + SUNXI_ALRM_IRQ_EN);
+
+ /* clear alarm week/cnt irq pending */
+ writel(SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND, chip->base +
+ SUNXI_ALRM_IRQ_STA);
+
+ chip->rtc = rtc_device_register("rtc-sunxi", &pdev->dev,
+ &sunxi_rtc_ops, THIS_MODULE);
+ if (IS_ERR(chip->rtc)) {
+ dev_err(&pdev->dev, "unable to register device\n");
+ return PTR_ERR(chip->rtc);
+ }
+
+ dev_info(&pdev->dev, "RTC enabled\n");
+
+ return 0;
+}
+
+static int sunxi_rtc_remove(struct platform_device *pdev)
+{
+ struct sunxi_rtc_dev *chip = platform_get_drvdata(pdev);
+
+ rtc_device_unregister(chip->rtc);
+
+ return 0;
+}
+
+static struct platform_driver sunxi_rtc_driver = {
+ .probe = sunxi_rtc_probe,
+ .remove = sunxi_rtc_remove,
+ .driver = {
+ .name = "sunxi-rtc",
+ .owner = THIS_MODULE,
+ .of_match_table = sunxi_rtc_dt_ids,
+ },
+};
+
+module_platform_driver(sunxi_rtc_driver);
+
+MODULE_DESCRIPTION("sunxi RTC driver");
+MODULE_AUTHOR("Carlo Caione <carlo.caione@gmail.com>");
+MODULE_LICENSE("GPL");

44
target/linux/sunxi/patches-3.13/141-dt-sun47i-add-rtc.patch
View File

@ -1,44 +0,0 @@
From b15b9f68606134222f7aff5120c8ef70ffab92b8 Mon Sep 17 00:00:00 2001
From: Carlo Caione <carlo.caione@gmail.com>
Date: Wed, 16 Oct 2013 20:30:26 +0200
Subject: [PATCH] ARM: dts: sun4i/sun7i: add RTC node
Add the RTC node to DTS for Allwinner A10 and Allwinner A20.
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 6 ++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 6 ++++++
2 files changed, 12 insertions(+)
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -412,6 +412,12 @@
reg = <0x01c20c90 0x10>;
};
+ rtc: rtc@01c20d00 {
+ compatible = "allwinner,sun4i-rtc";
+ reg = <0x01c20d00 0x20>;
+ interrupts = <24>;
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-sid";
reg = <0x01c23800 0x10>;
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -416,6 +416,12 @@
reg = <0x01c20c90 0x10>;
};
+ rtc: rtc@01c20d00 {
+ compatible = "allwinner,sun7i-a20-rtc";
+ reg = <0x01c20d00 0x20>;
+ interrupts = <0 24 1>;
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun7i-a20-sid";
reg = <0x01c23800 0x200>;

282
target/linux/sunxi/patches-3.13/145-clksrc-add-hstimer.patch
View File

@ -1,282 +0,0 @@
From 3bf30f6381f9287eb99ce096bf2fa327a69c8a71 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Thu, 7 Nov 2013 12:01:48 +0100
Subject: [PATCH] clocksource: Add Allwinner SoCs HS timers driver
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Most of the Allwinner SoCs (at this time, all but the A10) also have a
High Speed timers that are not using the 24MHz oscillator as a source
but rather the AHB clock running much faster.
The IP is slightly different between the A10s/A13 and the one used in
the A20/A31, since the latter have 4 timers available, while the former
have only 2 of them.
[dlezcano] : Fixed conflict with b788beda "Order Kconfig options
alphabetically"
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
.../bindings/timer/allwinner,sun5i-a13-hstimer.txt | 22 +++
arch/arm/mach-sunxi/Kconfig | 1 +
drivers/clocksource/Kconfig | 4 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-sun5i.c | 192 +++++++++++++++++++++
5 files changed, 220 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
create mode 100644 drivers/clocksource/timer-sun5i.c
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
@@ -0,0 +1,22 @@
+Allwinner SoCs High Speed Timer Controller
+
+Required properties:
+
+- compatible : should be "allwinner,sun5i-a13-hstimer" or
+ "allwinner,sun7i-a20-hstimer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : The interrupts of these timers (2 for the sun5i IP, 4 for the sun7i
+ one)
+- clocks: phandle to the source clock (usually the AHB clock)
+
+Example:
+
+timer@01c60000 {
+ compatible = "allwinner,sun7i-a20-hstimer";
+ reg = <0x01c60000 0x1000>;
+ interrupts = <0 51 1>,
+ <0 52 1>,
+ <0 53 1>,
+ <0 54 1>;
+ clocks = <&ahb1_gates 19>;
+};
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -13,3 +13,4 @@ config ARCH_SUNXI
select PINCTRL_SUNXI
select SPARSE_IRQ
select SUN4I_TIMER
+ select SUN5I_HSTIMER
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -37,6 +37,10 @@ config SUN4I_TIMER
select CLKSRC_MMIO
bool
+config SUN5I_HSTIMER
+ select CLKSRC_MMIO
+ bool
+
config VT8500_TIMER
bool
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_ARCH_MOXART) += moxart_time
obj-$(CONFIG_ARCH_MXS) += mxs_timer.o
obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o
+obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o
--- /dev/null
+++ b/drivers/clocksource/timer-sun5i.c
@@ -0,0 +1,192 @@
+/*
+ * Allwinner SoCs hstimer driver.
+ *
+ * Copyright (C) 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define TIMER_IRQ_EN_REG 0x00
+#define TIMER_IRQ_EN(val) BIT(val)
+#define TIMER_IRQ_ST_REG 0x04
+#define TIMER_CTL_REG(val) (0x20 * (val) + 0x10)
+#define TIMER_CTL_ENABLE BIT(0)
+#define TIMER_CTL_RELOAD BIT(1)
+#define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4)
+#define TIMER_CTL_ONESHOT BIT(7)
+#define TIMER_INTVAL_LO_REG(val) (0x20 * (val) + 0x14)
+#define TIMER_INTVAL_HI_REG(val) (0x20 * (val) + 0x18)
+#define TIMER_CNTVAL_LO_REG(val) (0x20 * (val) + 0x1c)
+#define TIMER_CNTVAL_HI_REG(val) (0x20 * (val) + 0x20)
+
+#define TIMER_SYNC_TICKS 3
+
+static void __iomem *timer_base;
+static u32 ticks_per_jiffy;
+
+/*
+ * When we disable a timer, we need to wait at least for 2 cycles of
+ * the timer source clock. We will use for that the clocksource timer
+ * that is already setup and runs at the same frequency than the other
+ * timers, and we never will be disabled.
+ */
+static void sun5i_clkevt_sync(void)
+{
+ u32 old = readl(timer_base + TIMER_CNTVAL_LO_REG(1));
+
+ while ((old - readl(timer_base + TIMER_CNTVAL_LO_REG(1))) < TIMER_SYNC_TICKS)
+ cpu_relax();
+}
+
+static void sun5i_clkevt_time_stop(u8 timer)
+{
+ u32 val = readl(timer_base + TIMER_CTL_REG(timer));
+ writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer));
+
+ sun5i_clkevt_sync();
+}
+
+static void sun5i_clkevt_time_setup(u8 timer, u32 delay)
+{
+ writel(delay, timer_base + TIMER_INTVAL_LO_REG(timer));
+}
+
+static void sun5i_clkevt_time_start(u8 timer, bool periodic)
+{
+ u32 val = readl(timer_base + TIMER_CTL_REG(timer));
+
+ if (periodic)
+ val &= ~TIMER_CTL_ONESHOT;
+ else
+ val |= TIMER_CTL_ONESHOT;
+
+ writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
+ timer_base + TIMER_CTL_REG(timer));
+}
+
+static void sun5i_clkevt_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ sun5i_clkevt_time_stop(0);
+ sun5i_clkevt_time_setup(0, ticks_per_jiffy);
+ sun5i_clkevt_time_start(0, true);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ sun5i_clkevt_time_stop(0);
+ sun5i_clkevt_time_start(0, false);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ sun5i_clkevt_time_stop(0);
+ break;
+ }
+}
+
+static int sun5i_clkevt_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ sun5i_clkevt_time_stop(0);
+ sun5i_clkevt_time_setup(0, evt - TIMER_SYNC_TICKS);
+ sun5i_clkevt_time_start(0, false);
+
+ return 0;
+}
+
+static struct clock_event_device sun5i_clockevent = {
+ .name = "sun5i_tick",
+ .rating = 340,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = sun5i_clkevt_mode,
+ .set_next_event = sun5i_clkevt_next_event,
+};
+
+
+static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+
+ writel(0x1, timer_base + TIMER_IRQ_ST_REG);
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction sun5i_timer_irq = {
+ .name = "sun5i_timer0",
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = sun5i_timer_interrupt,
+ .dev_id = &sun5i_clockevent,
+};
+
+static u32 sun5i_timer_sched_read(void)
+{
+ return ~readl(timer_base + TIMER_CNTVAL_LO_REG(1));
+}
+
+static void __init sun5i_timer_init(struct device_node *node)
+{
+ unsigned long rate;
+ struct clk *clk;
+ int ret, irq;
+ u32 val;
+
+ timer_base = of_iomap(node, 0);
+ if (!timer_base)
+ panic("Can't map registers");
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq <= 0)
+ panic("Can't parse IRQ");
+
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk))
+ panic("Can't get timer clock");
+ clk_prepare_enable(clk);
+ rate = clk_get_rate(clk);
+
+ writel(~0, timer_base + TIMER_INTVAL_LO_REG(1));
+ writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
+ timer_base + TIMER_CTL_REG(1));
+
+ setup_sched_clock(sun5i_timer_sched_read, 32, rate);
+ clocksource_mmio_init(timer_base + TIMER_CNTVAL_LO_REG(1), node->name,
+ rate, 340, 32, clocksource_mmio_readl_down);
+
+ ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
+
+ ret = setup_irq(irq, &sun5i_timer_irq);
+ if (ret)
+ pr_warn("failed to setup irq %d\n", irq);
+
+ /* Enable timer0 interrupt */
+ val = readl(timer_base + TIMER_IRQ_EN_REG);
+ writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
+
+ sun5i_clockevent.cpumask = cpu_possible_mask;
+ sun5i_clockevent.irq = irq;
+
+ clockevents_config_and_register(&sun5i_clockevent, rate,
+ TIMER_SYNC_TICKS, 0xffffffff);
+}
+CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer",
+ sun5i_timer_init);
+CLOCKSOURCE_OF_DECLARE(sun7i_a20, "allwinner,sun7i-a20-hstimer",
+ sun5i_timer_init);

33
target/linux/sunxi/patches-3.13/146-1-dt-sun5i-a10s-add-hstimer.patch
View File

@ -1,33 +0,0 @@
From 5ace5467690055b1772dcac69dd1377735b8a34b Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Thu, 7 Nov 2013 12:01:48 +0100
Subject: [PATCH] ARM: sun5i: a10s: Add support for the High Speed Timers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The Allwinner A10s has support for two high speed timers. Now that we
have a driver to support it, we can enable them in the device tree.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
arch/arm/boot/dts/sun5i-a10s.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -454,5 +454,12 @@
clock-frequency = <100000>;
status = "disabled";
};
+
+ timer@01c60000 {
+ compatible = "allwinner,sun5i-a13-hstimer";
+ reg = <0x01c60000 0x1000>;
+ interrupts = <82>, <83>;
+ clocks = <&ahb_gates 28>;
+ };
};
};

33
target/linux/sunxi/patches-3.13/146-2-dt-sun5i-a13-add-hstimer.patch
View File

@ -1,33 +0,0 @@
From 22a3eff19679e0e592e061201690670a2f5fdba7 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Thu, 7 Nov 2013 12:01:48 +0100
Subject: [PATCH] ARM: sun5i: a13: Add support for the High Speed Timers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The Allwinner A13 has support for two high speed timers. Now that we
have a driver to support it, we can enable them in the device tree.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
arch/arm/boot/dts/sun5i-a13.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -391,5 +391,12 @@
clock-frequency = <100000>;
status = "disabled";
};
+
+ timer@01c60000 {
+ compatible = "allwinner,sun5i-a13-hstimer";
+ reg = <0x01c60000 0x1000>;
+ interrupts = <82>, <83>;
+ clocks = <&ahb_gates 28>;
+ };
};
};

43
target/linux/sunxi/patches-3.13/146-3-dt-sun7i-a20-add-hstimer.patch
View File

@ -1,43 +0,0 @@
From 6c23e1fa6bd220b8f5665c150c83d4c016d95482 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Thu, 7 Nov 2013 12:01:48 +0100
Subject: [PATCH] ARM: sun7i: a20: Add support for the High Speed Timers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The Allwinner A20 has support for four high speed timers. Apart for the
number of timers (4 vs 2), it's basically the same logic than the high
speed timers found in the sun5i chips.
Now that we have a driver to support it, we can enable them in the
device tree.
[dlezcano] : Fixed conflict with 428abbb8 "Enable the I2C controllers"
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -552,6 +552,16 @@
status = "disabled";
};
+ hstimer@01c60000 {
+ compatible = "allwinner,sun7i-a20-hstimer";
+ reg = <0x01c60000 0x1000>;
+ interrupts = <0 81 4>,
+ <0 82 4>,
+ <0 83 4>,
+ <0 84 4>;
+ clocks = <&ahb_gates 28>;
+ };
+
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,

37
target/linux/sunxi/patches-3.13/146-4-dt-sun6i-a31-add-hstimer.patch
View File

@ -1,37 +0,0 @@
From 28a9c5d93113cab73dd3a4b4a74a983151c08b9d Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Fri, 20 Dec 2013 22:41:09 +0100
Subject: [PATCH] ARM: sun6i: a31: Add support for the High Speed Timers
The Allwinner A31 has support for four high speed timers. Apart for the
number of timers (4 vs 2), it's basically the same logic than the high
speed timers found in the sun5i chips.
Now that we have a driver to support it, we can enable them in the
device tree.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -312,6 +312,17 @@
status = "disabled";
};
+ hstimer@01c60000 {
+ compatible = "allwinner,sun7i-a20-hstimer";
+ reg = <0x01c60000 0x1000>;
+ interrupts = <0 51 4>,
+ <0 52 4>,
+ <0 53 4>,
+ <0 54 4>;
+ clocks = <&ahb1_gates 19>;
+ resets = <&ahb1_rst 19>;
+ };
+
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,

56
target/linux/sunxi/patches-3.13/150-1-dt-sun7i-add-gmac-clock-node.patch
View File

@ -1,56 +0,0 @@
From bc7a0478e6dac1304fdfdb6f3056f438b632da62 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Mon, 10 Feb 2014 18:35:48 +0800
Subject: [PATCH] ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI
The GMAC uses 1 of 2 sources for its transmit clock, depending on the
PHY interface mode. Add both sources as dummy clocks, and as parents
to the GMAC clock node.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index cefd7ac..7d98edc 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -322,6 +322,34 @@
};
/*
+ * The following two are dummy clocks, placeholders used in the gmac_tx
+ * clock. The gmac driver will choose one parent depending on the PHY
+ * interface mode, using clk_set_rate auto-reparenting.
+ * The actual TX clock rate is not controlled by the gmac_tx clock.
+ */
+ mii_phy_tx_clk: clk@2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ clock-output-names = "mii_phy_tx";
+ };
+
+ gmac_int_tx_clk: clk@3 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_int_tx";
+ };
+
+ gmac_tx_clk: clk@01c20164 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-gmac-clk";
+ reg = <0x01c20164 0x4>;
+ clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+ clock-output-names = "gmac_tx";
+ };
+
+ /*
* Dummy clock used by output clocks
*/
osc24M_32k: clk@1 {
--
1.8.5.5

39
target/linux/sunxi/patches-3.13/150-2-dt-sun7i-add-gmac-ctrler-node.patch
View File

@ -1,39 +0,0 @@
From 7584e81f6d9fecf0ad6e2854654b183432adb918 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Mon, 10 Feb 2014 18:35:49 +0800
Subject: [PATCH] ARM: dts: sun7i: Add GMAC controller node to sun7i DTSI
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 7d98edc..87eab0d 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -645,6 +645,21 @@
status = "disabled";
};
+ gmac: ethernet@01c50000 {
+ compatible = "allwinner,sun7i-a20-gmac";
+ reg = <0x01c50000 0x10000>;
+ interrupts = <0 85 4>;
+ interrupt-names = "macirq";
+ clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
+ clock-names = "stmmaceth", "allwinner_gmac_tx";
+ snps,pbl = <2>;
+ snps,fixed-burst;
+ snps,force_sf_dma_mode;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
hstimer@01c60000 {
compatible = "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
--
1.8.5.5

53
target/linux/sunxi/patches-3.13/150-3-dt-sun7i-gmac-add-pinmuxing.patch
View File

@ -1,53 +0,0 @@
From 249ac8d24efdc07f521b796b96796ffa55abe0a5 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Mon, 10 Feb 2014 18:35:50 +0800
Subject: [PATCH] ARM: dts: sun7i: Add pin muxing options for the GMAC
The A20 has EMAC and GMAC muxed on the same pins.
Add pin sets with gmac function for MII and RGMII mode to the DTSI.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 87eab0d..9bb6fdf 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -484,6 +484,32 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ gmac_pins_mii_a: gmac_mii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA9", "PA10",
+ "PA11", "PA12", "PA13", "PA14",
+ "PA15", "PA16";
+ allwinner,function = "gmac";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ gmac_pins_rgmii_a: gmac_rgmii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA10",
+ "PA11", "PA12", "PA13",
+ "PA15", "PA16";
+ allwinner,function = "gmac";
+ /*
+ * data lines in RGMII mode use DDR mode
+ * and need a higher signal drive strength
+ */
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
--
1.8.5.5

50
target/linux/sunxi/patches-3.13/151-0-stmmac-fixup-0.patch
View File

@ -1,50 +0,0 @@
From 33ba4079ea8c611c1aeca34f2d6d53a8214c14c5 Mon Sep 17 00:00:00 2001
From: Rashika Kheria <rashika.kheria@gmail.com>
Date: Thu, 19 Dec 2013 14:19:44 +0530
Subject: [PATCH] drivers: net: Mark functions as static in stmmac_platform.c
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This patch marks the function stmmac_pltfr_freeze() and
stmmac_pltfr_restore() in stmmac_platform.c as static because they are
not used outside this file.
Thus, it also removes the following warnings in
ethernet/stmicro/stmmac/stmmac_platform.c:
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:222:5: warning: no previous prototype for ‘stmmac_pltfr_freeze’ [-Wmissing-prototypes]
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:236:5: warning: no previous prototype for ‘stmmac_pltfr_restore’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 51c9069..38bd1f4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -219,7 +219,7 @@ static int stmmac_pltfr_resume(struct device *dev)
return stmmac_resume(ndev);
}
-int stmmac_pltfr_freeze(struct device *dev)
+static int stmmac_pltfr_freeze(struct device *dev)
{
int ret;
struct plat_stmmacenet_data *plat_dat = dev_get_platdata(dev);
@@ -233,7 +233,7 @@ int stmmac_pltfr_freeze(struct device *dev)
return ret;
}
-int stmmac_pltfr_restore(struct device *dev)
+static int stmmac_pltfr_restore(struct device *dev)
{
struct plat_stmmacenet_data *plat_dat = dev_get_platdata(dev);
struct net_device *ndev = dev_get_drvdata(dev);
--
1.8.5.5

77
target/linux/sunxi/patches-3.13/151-1-stmmac-fixup-1.patch
View File

@ -1,77 +0,0 @@
From 9cbadf094d9d479413dc8cfa77dff9e732184337 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Date: Thu, 16 Jan 2014 10:51:43 +0000
Subject: [PATCH] net: stmmac: support max-speed device tree property
This patch adds support to "max-speed" property which is a standard
Ethernet device tree property. max-speed specifies maximum speed
(specified in megabits per second) supported the device.
Depending on the clocking schemes some of the boards can only support
few link speeds, so having a way to limit the link speed in the mac
driver would allow such setups to work reliably.
Without this patch there is no way to tell the driver to limit the
link speed.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +++-
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 4 ++++
include/linux/stmmac.h | 1 +
3 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index ecdc8ab..15192c0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -776,6 +776,7 @@ static int stmmac_init_phy(struct net_device *dev)
char phy_id_fmt[MII_BUS_ID_SIZE + 3];
char bus_id[MII_BUS_ID_SIZE];
int interface = priv->plat->interface;
+ int max_speed = priv->plat->max_speed;
priv->oldlink = 0;
priv->speed = 0;
priv->oldduplex = -1;
@@ -800,7 +801,8 @@ static int stmmac_init_phy(struct net_device *dev)
/* Stop Advertising 1000BASE Capability if interface is not GMII */
if ((interface == PHY_INTERFACE_MODE_MII) ||
- (interface == PHY_INTERFACE_MODE_RMII))
+ (interface == PHY_INTERFACE_MODE_RMII) ||
+ (max_speed < 1000 && max_speed > 0))
phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 38bd1f4..9377ee6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -42,6 +42,10 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
*mac = of_get_mac_address(np);
plat->interface = of_get_phy_mode(np);
+ /* Get max speed of operation from device tree */
+ if (of_property_read_u32(np, "max-speed", &plat->max_speed))
+ plat->max_speed = -1;
+
plat->bus_id = of_alias_get_id(np, "ethernet");
if (plat->bus_id < 0)
plat->bus_id = 0;
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index bb5deb0..33ace71 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -110,6 +110,7 @@ struct plat_stmmacenet_data {
int force_sf_dma_mode;
int force_thresh_dma_mode;
int riwt_off;
+ int max_speed;
void (*fix_mac_speed)(void *priv, unsigned int speed);
void (*bus_setup)(void __iomem *ioaddr);
int (*init)(struct platform_device *pdev);
--
1.8.5.5

31
target/linux/sunxi/patches-3.13/151-2-stmmac-fixup-2.patch
View File

@ -1,31 +0,0 @@
From 984203ceff27e9d6d94fbae4b043fc9afb658121 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Date: Thu, 16 Jan 2014 10:51:58 +0000
Subject: [PATCH] net: stmmac: mdio: remove reset gpio free
This patch removes gpio_free for reset line of the phy, driver stores
the gpio number in its private data-structure to use in future. As the
driver uses this pin in future this pin should not be freed.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index fe7bc99..aab12d2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -166,7 +166,6 @@ static int stmmac_mdio_reset(struct mii_bus *bus)
udelay(data->delays[1]);
gpio_set_value(reset_gpio, active_low ? 1 : 0);
udelay(data->delays[2]);
- gpio_free(reset_gpio);
}
}
#endif
--
1.8.5.5

223
target/linux/sunxi/patches-3.13/151-3-stmmac-fixup-3.patch
View File

@ -1,223 +0,0 @@
From 09f8d6960b69e474eef9d2aebdd0d536d00af0c8 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Date: Thu, 16 Jan 2014 10:52:06 +0000
Subject: [PATCH] net: stmmac: move dma allocation to new function
This patch moves dma resource allocation to a new function
alloc_dma_desc_resources, the reason for moving this to a new function
is to keep the memory allocations in a separate function. One more reason
it to get suspend and hibernation cases working without releasing and
allocating these resources during suspend-resume and freeze-restore
cases.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 169 +++++++++++-----------
1 file changed, 85 insertions(+), 84 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 15192c0..532f2b4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -996,66 +996,6 @@ static int init_dma_desc_rings(struct net_device *dev)
pr_debug("%s: txsize %d, rxsize %d, bfsize %d\n", __func__,
txsize, rxsize, bfsize);
- if (priv->extend_desc) {
- priv->dma_erx = dma_alloc_coherent(priv->device, rxsize *
- sizeof(struct
- dma_extended_desc),
- &priv->dma_rx_phy,
- GFP_KERNEL);
- if (!priv->dma_erx)
- goto err_dma;
-
- priv->dma_etx = dma_alloc_coherent(priv->device, txsize *
- sizeof(struct
- dma_extended_desc),
- &priv->dma_tx_phy,
- GFP_KERNEL);
- if (!priv->dma_etx) {
- dma_free_coherent(priv->device, priv->dma_rx_size *
- sizeof(struct dma_extended_desc),
- priv->dma_erx, priv->dma_rx_phy);
- goto err_dma;
- }
- } else {
- priv->dma_rx = dma_alloc_coherent(priv->device, rxsize *
- sizeof(struct dma_desc),
- &priv->dma_rx_phy,
- GFP_KERNEL);
- if (!priv->dma_rx)
- goto err_dma;
-
- priv->dma_tx = dma_alloc_coherent(priv->device, txsize *
- sizeof(struct dma_desc),
- &priv->dma_tx_phy,
- GFP_KERNEL);
- if (!priv->dma_tx) {
- dma_free_coherent(priv->device, priv->dma_rx_size *
- sizeof(struct dma_desc),
- priv->dma_rx, priv->dma_rx_phy);
- goto err_dma;
- }
- }
-
- priv->rx_skbuff_dma = kmalloc_array(rxsize, sizeof(dma_addr_t),
- GFP_KERNEL);
- if (!priv->rx_skbuff_dma)
- goto err_rx_skbuff_dma;
-
- priv->rx_skbuff = kmalloc_array(rxsize, sizeof(struct sk_buff *),
- GFP_KERNEL);
- if (!priv->rx_skbuff)
- goto err_rx_skbuff;
-
- priv->tx_skbuff_dma = kmalloc_array(txsize, sizeof(dma_addr_t),
- GFP_KERNEL);
- if (!priv->tx_skbuff_dma)
- goto err_tx_skbuff_dma;
-
- priv->tx_skbuff = kmalloc_array(txsize, sizeof(struct sk_buff *),
- GFP_KERNEL);
- if (!priv->tx_skbuff)
- goto err_tx_skbuff;
-
if (netif_msg_probe(priv)) {
pr_debug("(%s) dma_rx_phy=0x%08x dma_tx_phy=0x%08x\n", __func__,
(u32) priv->dma_rx_phy, (u32) priv->dma_tx_phy);
@@ -1123,30 +1063,6 @@ static int init_dma_desc_rings(struct net_device *dev)
err_init_rx_buffers:
while (--i >= 0)
stmmac_free_rx_buffers(priv, i);
- kfree(priv->tx_skbuff);
-err_tx_skbuff:
- kfree(priv->tx_skbuff_dma);
-err_tx_skbuff_dma:
- kfree(priv->rx_skbuff);
-err_rx_skbuff:
- kfree(priv->rx_skbuff_dma);
-err_rx_skbuff_dma:
- if (priv->extend_desc) {
- dma_free_coherent(priv->device, priv->dma_tx_size *
- sizeof(struct dma_extended_desc),
- priv->dma_etx, priv->dma_tx_phy);
- dma_free_coherent(priv->device, priv->dma_rx_size *
- sizeof(struct dma_extended_desc),
- priv->dma_erx, priv->dma_rx_phy);
- } else {
- dma_free_coherent(priv->device,
- priv->dma_tx_size * sizeof(struct dma_desc),
- priv->dma_tx, priv->dma_tx_phy);
- dma_free_coherent(priv->device,
- priv->dma_rx_size * sizeof(struct dma_desc),
- priv->dma_rx, priv->dma_rx_phy);
- }
-err_dma:
return ret;
}
@@ -1182,6 +1098,85 @@ static void dma_free_tx_skbufs(struct stmmac_priv *priv)
}
}
+static int alloc_dma_desc_resources(struct stmmac_priv *priv)
+{
+ unsigned int txsize = priv->dma_tx_size;
+ unsigned int rxsize = priv->dma_rx_size;
+ int ret = -ENOMEM;
+
+ priv->rx_skbuff_dma = kmalloc_array(rxsize, sizeof(dma_addr_t),
+ GFP_KERNEL);
+ if (!priv->rx_skbuff_dma)
+ return -ENOMEM;
+
+ priv->rx_skbuff = kmalloc_array(rxsize, sizeof(struct sk_buff *),
+ GFP_KERNEL);
+ if (!priv->rx_skbuff)
+ goto err_rx_skbuff;
+
+ priv->tx_skbuff_dma = kmalloc_array(txsize, sizeof(dma_addr_t),
+ GFP_KERNEL);
+ if (!priv->tx_skbuff_dma)
+ goto err_tx_skbuff_dma;
+
+ priv->tx_skbuff = kmalloc_array(txsize, sizeof(struct sk_buff *),
+ GFP_KERNEL);
+ if (!priv->tx_skbuff)
+ goto err_tx_skbuff;
+
+ if (priv->extend_desc) {
+ priv->dma_erx = dma_alloc_coherent(priv->device, rxsize *
+ sizeof(struct
+ dma_extended_desc),
+ &priv->dma_rx_phy,
+ GFP_KERNEL);
+ if (!priv->dma_erx)
+ goto err_dma;
+
+ priv->dma_etx = dma_alloc_coherent(priv->device, txsize *
+ sizeof(struct
+ dma_extended_desc),
+ &priv->dma_tx_phy,
+ GFP_KERNEL);
+ if (!priv->dma_etx) {
+ dma_free_coherent(priv->device, priv->dma_rx_size *
+ sizeof(struct dma_extended_desc),
+ priv->dma_erx, priv->dma_rx_phy);
+ goto err_dma;
+ }
+ } else {
+ priv->dma_rx = dma_alloc_coherent(priv->device, rxsize *
+ sizeof(struct dma_desc),
+ &priv->dma_rx_phy,
+ GFP_KERNEL);
+ if (!priv->dma_rx)
+ goto err_dma;
+
+ priv->dma_tx = dma_alloc_coherent(priv->device, txsize *
+ sizeof(struct dma_desc),
+ &priv->dma_tx_phy,
+ GFP_KERNEL);
+ if (!priv->dma_tx) {
+ dma_free_coherent(priv->device, priv->dma_rx_size *
+ sizeof(struct dma_desc),
+ priv->dma_rx, priv->dma_rx_phy);
+ goto err_dma;
+ }
+ }
+
+ return 0;
+
+err_dma:
+ kfree(priv->tx_skbuff);
+err_tx_skbuff:
+ kfree(priv->tx_skbuff_dma);
+err_tx_skbuff_dma:
+ kfree(priv->rx_skbuff);
+err_rx_skbuff:
+ kfree(priv->rx_skbuff_dma);
+ return ret;
+}
+
static void free_dma_desc_resources(struct stmmac_priv *priv)
{
/* Release the DMA TX/RX socket buffers */
@@ -1623,6 +1618,12 @@ static int stmmac_open(struct net_device *dev)
priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
priv->dma_buf_sz = STMMAC_ALIGN(buf_sz);
+ alloc_dma_desc_resources(priv);
+ if (ret < 0) {
+ pr_err("%s: DMA descriptors allocation failed\n", __func__);
+ goto dma_desc_error;
+ }
+
ret = init_dma_desc_rings(dev);
if (ret < 0) {
pr_err("%s: DMA descriptors initialization failed\n", __func__);
--
1.8.5.5

214
target/linux/sunxi/patches-3.13/151-4-stmmac-fixup-4.patch
View File

@ -1,214 +0,0 @@
From 523f11b5d4fd72efb72b04cd7006bfd1d1d4f341 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Date: Thu, 16 Jan 2014 10:52:14 +0000
Subject: [PATCH] net: stmmac: move hardware setup for stmmac_open to new
function
This patch moves hardware setup part of the code in stmmac_open to a new
function stmmac_hw_setup, the reason for doing this is to make hw
initialization independent function so that PM functions can re-use it to
re-initialize the IP after returning from low power state.
This will also avoid code duplication across stmmac_resume/restore and
stmmac_open.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 155 ++++++++++++----------
1 file changed, 88 insertions(+), 67 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 532f2b4..341c8dc3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1586,6 +1586,86 @@ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv)
}
/**
+ * stmmac_hw_setup: setup mac in a usable state.
+ * @dev : pointer to the device structure.
+ * Description:
+ * This function sets up the ip in a usable state.
+ * Return value:
+ * 0 on success and an appropriate (-)ve integer as defined in errno.h
+ * file on failure.
+ */
+static int stmmac_hw_setup(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ int ret;
+
+ ret = init_dma_desc_rings(dev);
+ if (ret < 0) {
+ pr_err("%s: DMA descriptors initialization failed\n", __func__);
+ return ret;
+ }
+ /* DMA initialization and SW reset */
+ ret = stmmac_init_dma_engine(priv);
+ if (ret < 0) {
+ pr_err("%s: DMA engine initialization failed\n", __func__);
+ return ret;
+ }
+
+ /* Copy the MAC addr into the HW */
+ priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0);
+
+ /* If required, perform hw setup of the bus. */
+ if (priv->plat->bus_setup)
+ priv->plat->bus_setup(priv->ioaddr);
+
+ /* Initialize the MAC Core */
+ priv->hw->mac->core_init(priv->ioaddr);
+
+ /* Enable the MAC Rx/Tx */
+ stmmac_set_mac(priv->ioaddr, true);
+
+ /* Set the HW DMA mode and the COE */
+ stmmac_dma_operation_mode(priv);
+
+ stmmac_mmc_setup(priv);
+
+ ret = stmmac_init_ptp(priv);
+ if (ret)
+ pr_warn("%s: failed PTP initialisation\n", __func__);
+
+#ifdef CONFIG_STMMAC_DEBUG_FS
+ ret = stmmac_init_fs(dev);
+ if (ret < 0)
+ pr_warn("%s: failed debugFS registration\n", __func__);
+#endif
+ /* Start the ball rolling... */
+ pr_debug("%s: DMA RX/TX processes started...\n", dev->name);
+ priv->hw->dma->start_tx(priv->ioaddr);
+ priv->hw->dma->start_rx(priv->ioaddr);
+
+ /* Dump DMA/MAC registers */
+ if (netif_msg_hw(priv)) {
+ priv->hw->mac->dump_regs(priv->ioaddr);
+ priv->hw->dma->dump_regs(priv->ioaddr);
+ }
+ priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS;
+
+ priv->eee_enabled = stmmac_eee_init(priv);
+
+ stmmac_init_tx_coalesce(priv);
+
+ if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) {
+ priv->rx_riwt = MAX_DMA_RIWT;
+ priv->hw->dma->rx_watchdog(priv->ioaddr, MAX_DMA_RIWT);
+ }
+
+ if (priv->pcs && priv->hw->mac->ctrl_ane)
+ priv->hw->mac->ctrl_ane(priv->ioaddr, 0);
+
+ return 0;
+}
+
+/**
* stmmac_open - open entry point of the driver
* @dev : pointer to the device structure.
* Description:
@@ -1613,6 +1693,10 @@ static int stmmac_open(struct net_device *dev)
}
}
+ /* Extra statistics */
+ memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats));
+ priv->xstats.threshold = tc;
+
/* Create and initialize the TX/RX descriptors chains. */
priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
@@ -1624,28 +1708,14 @@ static int stmmac_open(struct net_device *dev)
goto dma_desc_error;
}
- ret = init_dma_desc_rings(dev);
+ ret = stmmac_hw_setup(dev);
if (ret < 0) {
- pr_err("%s: DMA descriptors initialization failed\n", __func__);
- goto dma_desc_error;
- }
-
- /* DMA initialization and SW reset */
- ret = stmmac_init_dma_engine(priv);
- if (ret < 0) {
- pr_err("%s: DMA engine initialization failed\n", __func__);
+ pr_err("%s: Hw setup failed\n", __func__);
goto init_error;
}
- /* Copy the MAC addr into the HW */
- priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0);
-
- /* If required, perform hw setup of the bus. */
- if (priv->plat->bus_setup)
- priv->plat->bus_setup(priv->ioaddr);
-
- /* Initialize the MAC Core */
- priv->hw->mac->core_init(priv->ioaddr);
+ if (priv->phydev)
+ phy_start(priv->phydev);
/* Request the IRQ lines */
ret = request_irq(dev->irq, stmmac_interrupt,
@@ -1678,55 +1748,6 @@ static int stmmac_open(struct net_device *dev)
}
}
- /* Enable the MAC Rx/Tx */
- stmmac_set_mac(priv->ioaddr, true);
-
- /* Set the HW DMA mode and the COE */
- stmmac_dma_operation_mode(priv);
-
- /* Extra statistics */
- memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats));
- priv->xstats.threshold = tc;
-
- stmmac_mmc_setup(priv);
-
- ret = stmmac_init_ptp(priv);
- if (ret)
- pr_warn("%s: failed PTP initialisation\n", __func__);
-
-#ifdef CONFIG_STMMAC_DEBUG_FS
- ret = stmmac_init_fs(dev);
- if (ret < 0)
- pr_warn("%s: failed debugFS registration\n", __func__);
-#endif
- /* Start the ball rolling... */
- pr_debug("%s: DMA RX/TX processes started...\n", dev->name);
- priv->hw->dma->start_tx(priv->ioaddr);
- priv->hw->dma->start_rx(priv->ioaddr);
-
- /* Dump DMA/MAC registers */
- if (netif_msg_hw(priv)) {
- priv->hw->mac->dump_regs(priv->ioaddr);
- priv->hw->dma->dump_regs(priv->ioaddr);
- }
-
- if (priv->phydev)
- phy_start(priv->phydev);
-
- priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS;
-
- priv->eee_enabled = stmmac_eee_init(priv);
-
- stmmac_init_tx_coalesce(priv);
-
- if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) {
- priv->rx_riwt = MAX_DMA_RIWT;
- priv->hw->dma->rx_watchdog(priv->ioaddr, MAX_DMA_RIWT);
- }
-
- if (priv->pcs && priv->hw->mac->ctrl_ane)
- priv->hw->mac->ctrl_ane(priv->ioaddr, 0);
-
napi_enable(&priv->napi);
netif_start_queue(dev);
--
1.8.5.5

45
target/linux/sunxi/patches-3.13/151-5-stmmac-fixup-5.patch
View File

@ -1,45 +0,0 @@
From 073752aa59b3db120b2508d5bdd0598ada25fd25 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Date: Thu, 16 Jan 2014 10:52:27 +0000
Subject: [PATCH] net: stmmac: make stmmac_mdio_reset non-static
This patch promotes stmmac_mdio_reset function from static to
non-static, so that power management functions can decide to reset if
the IP comes out from lowe power state specially hibernation cases.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 92be6b3..5a568015 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -110,6 +110,7 @@ struct stmmac_priv {
int stmmac_mdio_unregister(struct net_device *ndev);
int stmmac_mdio_register(struct net_device *ndev);
+int stmmac_mdio_reset(struct mii_bus *mii);
void stmmac_set_ethtool_ops(struct net_device *netdev);
extern const struct stmmac_desc_ops enh_desc_ops;
extern const struct stmmac_desc_ops ndesc_ops;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index aab12d2..a468eb1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -128,7 +128,7 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
* @bus: points to the mii_bus structure
* Description: reset the MII bus
*/
-static int stmmac_mdio_reset(struct mii_bus *bus)
+int stmmac_mdio_reset(struct mii_bus *bus)
{
#if defined(CONFIG_STMMAC_PLATFORM)
struct net_device *ndev = bus->priv;
--
1.8.5.5

57
target/linux/sunxi/patches-3.13/151-6-stmmac-fixup-6.patch
View File

@ -1,57 +0,0 @@
From 623997fb90eab7a135c2c68a332c8450a488baca Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Date: Thu, 16 Jan 2014 10:52:35 +0000
Subject: [PATCH] net: stmmac: fix power management suspend-resume case
The driver PM resume assumes that the IP is still powered up and the
all the register contents are not disturbed when it comes out of low
power suspend case. This assumption is wrong, basically the driver
should not consider any state of registers after it comes out of low
power. However driver can keep the part of the IP powered up if its a
wake up source. But it can not assume the register state of the IP. Also
its possible that SOC glue layer can take the power off the IP if its
not wake-up source to reduce the power consumption.
This patch re initializes hardware by calling stmmac_hw_setup function in
resume case.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 341c8dc3..742a83f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2887,18 +2887,19 @@ int stmmac_resume(struct net_device *ndev)
* this bit because it can generate problems while resuming
* from another devices (e.g. serial console).
*/
- if (device_may_wakeup(priv->device))
+ if (device_may_wakeup(priv->device)) {
priv->hw->mac->pmt(priv->ioaddr, 0);
- else
+ } else {
/* enable the clk prevously disabled */
clk_prepare_enable(priv->stmmac_clk);
+ /* reset the phy so that it's ready */
+ if (priv->mii)
+ stmmac_mdio_reset(priv->mii);
+ }
netif_device_attach(ndev);
- /* Enable the MAC and DMA */
- stmmac_set_mac(priv->ioaddr, true);
- priv->hw->dma->start_tx(priv->ioaddr);
- priv->hw->dma->start_rx(priv->ioaddr);
+ stmmac_hw_setup(ndev);
napi_enable(&priv->napi);
--
1.8.5.5

146
target/linux/sunxi/patches-3.13/151-7-stmmac-fixup-7.patch
View File

@ -1,146 +0,0 @@
From 33a23e223749c45ff8099ff9baa235301a3ad07f Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Date: Thu, 16 Jan 2014 10:52:44 +0000
Subject: [PATCH] net: stmmac: use suspend functions for hibernation
In hibernation freeze case the driver just releases the resources like
dma buffers, irqs, unregisters the drivers and during restore it does
register, request the resources. This is not really necessary, as part
of power management all the data structures are intact, all the
previously allocated resources can be used after coming out of low
power.
This patch uses the suspend and resume callbacks for freeze and
restore which initializes the hardware correctly without unregistering
or releasing the resources, this should also help in reducing the time
to restore.
Also this patch fixes a bug in stmmac_pltfr_restore and
stmmac_pltfr_freeze where it tries to get hold of platform data via
dev_get_platdata call, which would return NULL in device tree cases and
the next if statement would crash as there is no NULL check.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 -
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 16 --------
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 44 ++++++----------------
3 files changed, 12 insertions(+), 50 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 5a568015..027f1dd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -117,8 +117,6 @@ struct stmmac_priv {
extern const struct stmmac_hwtimestamp stmmac_ptp;
int stmmac_ptp_register(struct stmmac_priv *priv);
void stmmac_ptp_unregister(struct stmmac_priv *priv);
-int stmmac_freeze(struct net_device *ndev);
-int stmmac_restore(struct net_device *ndev);
int stmmac_resume(struct net_device *ndev);
int stmmac_suspend(struct net_device *ndev);
int stmmac_dvr_remove(struct net_device *ndev);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 742a83f..c1298a0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2912,22 +2912,6 @@ int stmmac_resume(struct net_device *ndev)
return 0;
}
-
-int stmmac_freeze(struct net_device *ndev)
-{
- if (!ndev || !netif_running(ndev))
- return 0;
-
- return stmmac_release(ndev);
-}
-
-int stmmac_restore(struct net_device *ndev)
-{
- if (!ndev || !netif_running(ndev))
- return 0;
-
- return stmmac_open(ndev);
-}
#endif /* CONFIG_PM */
/* Driver can be configured w/ and w/ both PCI and Platf drivers
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 9377ee6..6d0bf22 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -211,55 +211,35 @@ static int stmmac_pltfr_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static int stmmac_pltfr_suspend(struct device *dev)
{
- struct net_device *ndev = dev_get_drvdata(dev);
-
- return stmmac_suspend(ndev);
-}
-
-static int stmmac_pltfr_resume(struct device *dev)
-{
- struct net_device *ndev = dev_get_drvdata(dev);
-
- return stmmac_resume(ndev);
-}
-
-static int stmmac_pltfr_freeze(struct device *dev)
-{
int ret;
- struct plat_stmmacenet_data *plat_dat = dev_get_platdata(dev);
struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
struct platform_device *pdev = to_platform_device(dev);
- ret = stmmac_freeze(ndev);
- if (plat_dat->exit)
- plat_dat->exit(pdev);
+ ret = stmmac_suspend(ndev);
+ if (priv->plat->exit)
+ priv->plat->exit(pdev);
return ret;
}
-static int stmmac_pltfr_restore(struct device *dev)
+static int stmmac_pltfr_resume(struct device *dev)
{
- struct plat_stmmacenet_data *plat_dat = dev_get_platdata(dev);
struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
struct platform_device *pdev = to_platform_device(dev);
- if (plat_dat->init)
- plat_dat->init(pdev);
+ if (priv->plat->init)
+ priv->plat->init(pdev);
- return stmmac_restore(ndev);
+ return stmmac_resume(ndev);
}
-static const struct dev_pm_ops stmmac_pltfr_pm_ops = {
- .suspend = stmmac_pltfr_suspend,
- .resume = stmmac_pltfr_resume,
- .freeze = stmmac_pltfr_freeze,
- .thaw = stmmac_pltfr_restore,
- .restore = stmmac_pltfr_restore,
-};
-#else
-static const struct dev_pm_ops stmmac_pltfr_pm_ops;
#endif /* CONFIG_PM */
+static SIMPLE_DEV_PM_OPS(stmmac_pltfr_pm_ops,
+ stmmac_pltfr_suspend, stmmac_pltfr_resume);
+
static const struct of_device_id stmmac_dt_ids[] = {
{ .compatible = "st,spear600-gmac"},
{ .compatible = "snps,dwmac-3.610"},
--
1.8.5.5

50
target/linux/sunxi/patches-3.13/151-8-stmmac-fixup-8.patch
View File

@ -1,50 +0,0 @@
From db88f10ad6a84c5bcb71bf51f0988a4bb1733bea Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Date: Thu, 16 Jan 2014 10:52:52 +0000
Subject: [PATCH] net: stmmac: restore pinstate in pm resume.
This patch adds code to restore default pinstate of the pins when it
comes back from low power state. Without this patch the state of the
pins would be unknown and the driver would not work.
This patch also adds code to put the pins in to sleep state when the
driver enters low power state.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index c1298a0..df7d8d6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -43,6 +43,7 @@
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/prefetch.h>
+#include <linux/pinctrl/consumer.h>
#ifdef CONFIG_STMMAC_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
@@ -2864,6 +2865,7 @@ int stmmac_suspend(struct net_device *ndev)
priv->hw->mac->pmt(priv->ioaddr, priv->wolopts);
else {
stmmac_set_mac(priv->ioaddr, false);
+ pinctrl_pm_select_sleep_state(priv->device);
/* Disable clock in case of PWM is off */
clk_disable_unprepare(priv->stmmac_clk);
}
@@ -2890,6 +2892,7 @@ int stmmac_resume(struct net_device *ndev)
if (device_may_wakeup(priv->device)) {
priv->hw->mac->pmt(priv->ioaddr, 0);
} else {
+ pinctrl_pm_select_default_state(priv->device);
/* enable the clk prevously disabled */
clk_prepare_enable(priv->stmmac_clk);
/* reset the phy so that it's ready */
--
1.8.5.5

73
target/linux/sunxi/patches-3.13/151-9-stmmac-fixup-9.patch
View File

@ -1,73 +0,0 @@
From 89f7f2cfdd7ade55d5230501c21271690790ceda Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Date: Thu, 16 Jan 2014 10:53:00 +0000
Subject: [PATCH] net: stmmac: notify the PM core of a wakeup event.
In PM_SUSPEND_FREEZE and WOL(Wakeup On Lan) case, when the driver gets a
wakeup event, either the driver or platform specific PM code should notify
the pm core about it, so that the system can wakeup from low power.
In cases where there is no involvement of platform specific PM, it
becomes driver responsibility to notify the PM core to wakeup the
system.
Without this WOL with PM_SUSPEND_FREEZE does not work on STi based SOCs.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 9 +++++++--
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 027f1dd..73709e9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -105,6 +105,7 @@ struct stmmac_priv {
unsigned int default_addend;
u32 adv_ts;
int use_riwt;
+ int irq_wake;
spinlock_t ptp_lock;
};
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index df7d8d6..cddcf76 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2320,6 +2320,9 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
struct net_device *dev = (struct net_device *)dev_id;
struct stmmac_priv *priv = netdev_priv(dev);
+ if (priv->irq_wake)
+ pm_wakeup_event(priv->device, 0);
+
if (unlikely(!dev)) {
pr_err("%s: invalid dev pointer\n", __func__);
return IRQ_NONE;
@@ -2861,9 +2864,10 @@ int stmmac_suspend(struct net_device *ndev)
stmmac_clear_descriptors(priv);
/* Enable Power down mode by programming the PMT regs */
- if (device_may_wakeup(priv->device))
+ if (device_may_wakeup(priv->device)) {
priv->hw->mac->pmt(priv->ioaddr, priv->wolopts);
- else {
+ priv->irq_wake = 1;
+ } else {
stmmac_set_mac(priv->ioaddr, false);
pinctrl_pm_select_sleep_state(priv->device);
/* Disable clock in case of PWM is off */
@@ -2891,6 +2895,7 @@ int stmmac_resume(struct net_device *ndev)
*/
if (device_may_wakeup(priv->device)) {
priv->hw->mac->pmt(priv->ioaddr, 0);
+ priv->irq_wake = 0;
} else {
pinctrl_pm_select_default_state(priv->device);
/* enable the clk prevously disabled */
--
1.8.5.5

38
target/linux/sunxi/patches-3.13/152-1-dt-sun7i-enable-gmac-cubietruck.patch
View File

@ -1,38 +0,0 @@
From 957f00fbab201f429ad81cc87ee3177e4289567d Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Mon, 10 Feb 2014 18:35:51 +0800
Subject: [PATCH] ARM: dts: sun7i: cubietruck: Enable the GMAC
The CubieTruck uses the GMAC with an RGMII phy.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index f9dcb61..025ce52 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -51,6 +51,18 @@
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
+
+ gmac: ethernet@01c50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
};
leds {
--
1.8.5.5

61
target/linux/sunxi/patches-3.13/152-2-dt-sun7i-enable-gmac-cubieboard2.patch
View File

@ -1,61 +0,0 @@
From 7405ae68d251191677e51aadb4308d6ce5212bbe Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Mon, 10 Feb 2014 18:35:52 +0800
Subject: [PATCH] ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC
GMAC has better performance and fewer hardware issues.
Use the GMAC in MII mode for ethernet instead of the EMAC.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 27 ++++++++++++---------------
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 5c51cb8..7bf4935 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -19,21 +19,6 @@
compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
-
- mdio@01c0b080 {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
-
pinctrl@01c20800 {
led_pins_cubieboard2: led_pins@0 {
allwinner,pins = "PH20", "PH21";
@@ -60,6 +45,18 @@
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
+
+ gmac: ethernet@01c50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
};
leds {
--
1.8.5.5

62
target/linux/sunxi/patches-3.13/152-3-dt-sun7i-enable-gmac-a20-micro.patch
View File

@ -1,62 +0,0 @@
From e401b86036245d2d62d825f0e3e12286c111b281 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Mon, 10 Feb 2014 18:35:53 +0800
Subject: [PATCH] ARM: dts: sun7i: a20-olinuxino-micro: Enable GMAC instead of
EMAC
GMAC has better performance and fewer hardware issues.
Use the GMAC in MII mode for ethernet instead of the EMAC.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 27 +++++++++++--------------
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index ead3013..b02a796 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -19,21 +19,6 @@
compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
-
- mdio@01c0b080 {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
-
pinctrl@01c20800 {
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PH2";
@@ -78,6 +63,18 @@
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
+
+ gmac: ethernet@01c50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
};
leds {
--
1.8.5.5

96
target/linux/sunxi/patches-3.13/153-1-stmmac-enable-main-clock-when-probing.patch
View File

@ -1,96 +0,0 @@
From 62866e98737e77c87f9dec99edea76ab54360770 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Fri, 17 Jan 2014 21:24:40 +0800
Subject: [PATCH] net: stmmac: Enable stmmac main clock when probing hardware
The stmmac driver does not enable the main clock during the probe phase.
If the clock was not enabled by the boot loader or was disabled by the
kernel, hardware features and the MDIO bus would not be probed properly.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 26 +++++++++++------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index cddcf76..0d2c4cb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1680,8 +1680,6 @@ static int stmmac_open(struct net_device *dev)
struct stmmac_priv *priv = netdev_priv(dev);
int ret;
- clk_prepare_enable(priv->stmmac_clk);
-
stmmac_check_ether_addr(priv);
if (priv->pcs != STMMAC_PCS_RGMII && priv->pcs != STMMAC_PCS_TBI &&
@@ -1819,7 +1817,6 @@ static int stmmac_release(struct net_device *dev)
#ifdef CONFIG_STMMAC_DEBUG_FS
stmmac_exit_fs();
#endif
- clk_disable_unprepare(priv->stmmac_clk);
stmmac_release_ptp(priv);
@@ -2727,10 +2724,18 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
if ((phyaddr >= 0) && (phyaddr <= 31))
priv->plat->phy_addr = phyaddr;
+ priv->stmmac_clk = devm_clk_get(priv->device, STMMAC_RESOURCE_NAME);
+ if (IS_ERR(priv->stmmac_clk)) {
+ dev_warn(priv->device, "%s: warning: cannot get CSR clock\n",
+ __func__);
+ goto error_clk_get;
+ }
+ clk_prepare_enable(priv->stmmac_clk);
+
/* Init MAC and get the capabilities */
ret = stmmac_hw_init(priv);
if (ret)
- goto error_free_netdev;
+ goto error_hw_init;
ndev->netdev_ops = &stmmac_netdev_ops;
@@ -2768,12 +2773,6 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
goto error_netdev_register;
}
- priv->stmmac_clk = clk_get(priv->device, STMMAC_RESOURCE_NAME);
- if (IS_ERR(priv->stmmac_clk)) {
- pr_warn("%s: warning: cannot get CSR clock\n", __func__);
- goto error_clk_get;
- }
-
/* If a specific clk_csr value is passed from the platform
* this means that the CSR Clock Range selection cannot be
* changed at run-time and it is fixed. Viceversa the driver'll try to
@@ -2801,12 +2800,12 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
return priv;
error_mdio_register:
- clk_put(priv->stmmac_clk);
-error_clk_get:
unregister_netdev(ndev);
error_netdev_register:
netif_napi_del(&priv->napi);
-error_free_netdev:
+error_hw_init:
+ clk_disable_unprepare(priv->stmmac_clk);
+error_clk_get:
free_netdev(ndev);
return NULL;
@@ -2833,6 +2832,7 @@ int stmmac_dvr_remove(struct net_device *ndev)
stmmac_mdio_unregister(ndev);
netif_carrier_off(ndev);
unregister_netdev(ndev);
+ clk_disable_unprepare(priv->stmmac_clk);
free_netdev(ndev);
return 0;
--
1.8.5.5

158
target/linux/sunxi/patches-3.13/153-2-stmmac-add-support-for-optional-reset-control.patch
View File

@ -1,158 +0,0 @@
From c5e4ddbdfa1134a36589c1466ed4abb85fe6f976 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Fri, 17 Jan 2014 21:24:41 +0800
Subject: [PATCH] net: stmmac: Add support for optional reset control
The DWMAC has a reset assert line, which is used on some SoCs. Add an
optional reset control to stmmac driver core.
To support reset control deferred probing, this patch changes the driver
probe function to return the actual error, instead of just -EINVAL.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
Documentation/devicetree/bindings/net/stmmac.txt | 3 +++
drivers/net/ethernet/stmicro/stmmac/Kconfig | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 ++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 19 ++++++++++++++++++-
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 4 ++--
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 4 ++--
6 files changed, 28 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index eba0e5e..d132513 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -30,6 +30,9 @@ Required properties:
Optional properties:
- mac-address: 6 bytes, mac address
+- resets: Should contain a phandle to the STMMAC reset signal, if any
+- reset-names: Should contain the reset signal name "stmmaceth", if a
+ reset phandle is given
Examples:
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 6e52c0f..b59d1ef 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -5,6 +5,7 @@ config STMMAC_ETH
select PHYLIB
select CRC32
select PTP_1588_CLOCK
+ select RESET_CONTROLLER
---help---
This is the driver for the Ethernet IPs are built around a
Synopsys IP Core and only tested on the STMicroelectronics
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 73709e9..c1c141f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -32,6 +32,7 @@
#include <linux/pci.h>
#include "common.h"
#include <linux/ptp_clock_kernel.h>
+#include <linux/reset.h>
struct stmmac_priv {
/* Frequently used values are kept adjacent for cache effect */
@@ -91,6 +92,7 @@ struct stmmac_priv {
int wolopts;
int wol_irq;
struct clk *stmmac_clk;
+ struct reset_control *stmmac_rst;
int clk_csr;
struct timer_list eee_ctrl_timer;
int lpi_irq;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0d2c4cb..0c5c120 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -51,6 +51,7 @@
#include <linux/net_tstamp.h>
#include "stmmac_ptp.h"
#include "stmmac.h"
+#include <linux/reset.h>
#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x)
#define JUMBO_LEN 9000
@@ -2728,10 +2729,24 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
if (IS_ERR(priv->stmmac_clk)) {
dev_warn(priv->device, "%s: warning: cannot get CSR clock\n",
__func__);
+ ret = PTR_ERR(priv->stmmac_clk);
goto error_clk_get;
}
clk_prepare_enable(priv->stmmac_clk);
+ priv->stmmac_rst = devm_reset_control_get(priv->device,
+ STMMAC_RESOURCE_NAME);
+ if (IS_ERR(priv->stmmac_rst)) {
+ if (PTR_ERR(priv->stmmac_rst) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto error_hw_init;
+ }
+ dev_info(priv->device, "no reset control found\n");
+ priv->stmmac_rst = NULL;
+ }
+ if (priv->stmmac_rst)
+ reset_control_deassert(priv->stmmac_rst);
+
/* Init MAC and get the capabilities */
ret = stmmac_hw_init(priv);
if (ret)
@@ -2808,7 +2823,7 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
error_clk_get:
free_netdev(ndev);
- return NULL;
+ return ERR_PTR(ret);
}
/**
@@ -2832,6 +2847,8 @@ int stmmac_dvr_remove(struct net_device *ndev)
stmmac_mdio_unregister(ndev);
netif_carrier_off(ndev);
unregister_netdev(ndev);
+ if (priv->stmmac_rst)
+ reset_control_assert(priv->stmmac_rst);
clk_disable_unprepare(priv->stmmac_clk);
free_netdev(ndev);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 37ba2e0..2916089 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -100,9 +100,9 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
stmmac_default_data();
priv = stmmac_dvr_probe(&(pdev->dev), &plat_dat, addr);
- if (!priv) {
+ if (IS_ERR(priv)) {
pr_err("%s: main driver probe failed", __func__);
- ret = -ENODEV;
+ ret = PTR_ERR(priv);
goto err_out;
}
priv->dev->irq = pdev->irq;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 6d0bf22..cc6b89a7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -152,9 +152,9 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
}
priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr);
- if (!priv) {
+ if (IS_ERR(priv)) {
pr_err("%s: main driver probe failed", __func__);
- return -ENODEV;
+ return PTR_ERR(priv);
}
/* Get MAC address if available (DT) */
--
1.8.5.5

124
target/linux/sunxi/patches-3.13/153-3-stmmac-allocate-pass-board-specific-data-to-callbacks.patch
View File

@ -1,124 +0,0 @@
From 938dfdaa3c0f92e9a490d324f3bce43bbaef7632 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Fri, 17 Jan 2014 21:24:42 +0800
Subject: [PATCH] net: stmmac: Allocate and pass soc/board specific data to
callbacks
The current .init and .exit callbacks requires access to driver
private data structures. This is not a good seperation and abstraction.
Instead, we add a new .setup callback for allocating private data, and
pass the returned pointer to the other callbacks.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
Documentation/networking/stmmac.txt | 12 ++++++++----
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 18 ++++++++++++++----
include/linux/stmmac.h | 6 ++++--
3 files changed, 26 insertions(+), 10 deletions(-)
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index cdd916d..2090895 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -127,8 +127,9 @@ struct plat_stmmacenet_data {
int riwt_off;
void (*fix_mac_speed)(void *priv, unsigned int speed);
void (*bus_setup)(void __iomem *ioaddr);
- int (*init)(struct platform_device *pdev);
- void (*exit)(struct platform_device *pdev);
+ void *(*setup)(struct platform_device *pdev);
+ int (*init)(struct platform_device *pdev, void *priv);
+ void (*exit)(struct platform_device *pdev, void *priv);
void *custom_cfg;
void *custom_data;
void *bsp_priv;
@@ -169,10 +170,13 @@ Where:
o bus_setup: perform HW setup of the bus. For example, on some ST platforms
this field is used to configure the AMBA bridge to generate more
efficient STBus traffic.
- o init/exit: callbacks used for calling a custom initialization;
+ o setup/init/exit: callbacks used for calling a custom initialization;
this is sometime necessary on some platforms (e.g. ST boxes)
where the HW needs to have set some PIO lines or system cfg
- registers.
+ registers. setup should return a pointer to private data,
+ which will be stored in bsp_priv, and then passed to init and
+ exit callbacks. init/exit callbacks should not use or modify
+ platform data.
o custom_cfg/custom_data: this is a custom configuration that can be passed
while initializing the resources.
o bsp_priv: another private pointer.
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index cc6b89a7..704a5e0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -144,9 +144,16 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
}
}
+ /* Custom setup (if needed) */
+ if (plat_dat->setup) {
+ plat_dat->bsp_priv = plat_dat->setup(pdev);
+ if (IS_ERR(plat_dat->bsp_priv))
+ return PTR_ERR(plat_dat->bsp_priv);
+ }
+
/* Custom initialisation (if needed)*/
if (plat_dat->init) {
- ret = plat_dat->init(pdev);
+ ret = plat_dat->init(pdev, plat_dat->bsp_priv);
if (unlikely(ret))
return ret;
}
@@ -203,7 +210,10 @@ static int stmmac_pltfr_remove(struct platform_device *pdev)
int ret = stmmac_dvr_remove(ndev);
if (priv->plat->exit)
- priv->plat->exit(pdev);
+ priv->plat->exit(pdev, priv->plat->bsp_priv);
+
+ if (priv->plat->free)
+ priv->plat->free(pdev, priv->plat->bsp_priv);
return ret;
}
@@ -218,7 +228,7 @@ static int stmmac_pltfr_suspend(struct device *dev)
ret = stmmac_suspend(ndev);
if (priv->plat->exit)
- priv->plat->exit(pdev);
+ priv->plat->exit(pdev, priv->plat->bsp_priv);
return ret;
}
@@ -230,7 +240,7 @@ static int stmmac_pltfr_resume(struct device *dev)
struct platform_device *pdev = to_platform_device(dev);
if (priv->plat->init)
- priv->plat->init(pdev);
+ priv->plat->init(pdev, priv->plat->bsp_priv);
return stmmac_resume(ndev);
}
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 33ace71..0a5a7ac 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -113,8 +113,10 @@ struct plat_stmmacenet_data {
int max_speed;
void (*fix_mac_speed)(void *priv, unsigned int speed);
void (*bus_setup)(void __iomem *ioaddr);
- int (*init)(struct platform_device *pdev);
- void (*exit)(struct platform_device *pdev);
+ void *(*setup)(struct platform_device *pdev);
+ void (*free)(struct platform_device *pdev, void *priv);
+ int (*init)(struct platform_device *pdev, void *priv);
+ void (*exit)(struct platform_device *pdev, void *priv);
void *custom_cfg;
void *custom_data;
void *bsp_priv;
--
1.8.5.5

31
target/linux/sunxi/patches-3.13/153-4-stmmac-honor-dt-parameter-to-dma-store-and-fwd.patch
View File

@ -1,31 +0,0 @@
From 6aedb8c06df732625cf998c1428396914f3139b4 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Fri, 17 Jan 2014 21:24:44 +0800
Subject: [PATCH] net: stmmac: Honor DT parameter to force DMA store and
forward mode
"snps,force_sf_dma_mode" is documented in stmmac device tree bindings,
but is never handled by the driver.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 704a5e0..634260e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -56,6 +56,8 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
sizeof(struct stmmac_mdio_bus_data),
GFP_KERNEL);
+ plat->force_sf_dma_mode = of_property_read_bool(np, "snps,force_sf_dma_mode");
+
/*
* Currently only the properties needed on SPEAr600
* are provided. All other properties should be added
--
1.8.5.5

55
target/linux/sunxi/patches-3.13/153-5-stmmac-deprecate-snps-phy-addr.patch
View File

@ -1,55 +0,0 @@
From 436f7ecdcc08f71ddc106b7bbe3bcbf1785f3bff Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Fri, 17 Jan 2014 21:24:45 +0800
Subject: [PATCH] net: stmmac: Deprecate snps, phy-addr and auto-detect PHY
address
The snps,phy-addr device tree property is non-standard, and should be
removed in favor of proper phy node support. Remove it from the binding
documents and warn if the property is still used.
Most PHYs respond to address 0, but a few don't, so auto-detect PHY
address by default, to make up for the lack of explicit address selection.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
Documentation/devicetree/bindings/net/stmmac.txt | 1 -
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 9 ++++++++-
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index d132513..aefb639 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -12,7 +12,6 @@ Required properties:
property
- phy-mode: String, operation mode of the PHY interface.
Supported values are: "mii", "rmii", "gmii", "rgmii".
-- snps,phy-addr phy address to connect to.
- snps,reset-gpio gpio number for phy reset.
- snps,reset-active-low boolean flag to indicate if phy reset is active low.
- snps,reset-delays-us is triplet of delays
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 634260e..82110f1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -50,7 +50,14 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
if (plat->bus_id < 0)
plat->bus_id = 0;
- of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr);
+ /* Default to phy auto-detection */
+ plat->phy_addr = -1;
+
+ /* "snps,phy-addr" is not a standard property. Mark it as deprecated
+ * and warn of its use. Remove this when phy node support is added.
+ */
+ if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
+ dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
sizeof(struct stmmac_mdio_bus_data),
--
1.8.5.5

123
target/linux/sunxi/patches-3.13/153-6-stmmac-use-drvdata-callback-with-compat-strings.patch
View File

@ -1,123 +0,0 @@
From 022066f50f53000679d31eb407693085f37b3f14 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Fri, 17 Jan 2014 21:24:46 +0800
Subject: [PATCH] net: stmmac: Use driver data and callbacks tied with
compatible strings
The stmmac driver core allows passing feature flags and callbacks via
platform data. Add a similar stmmac_of_data to pass flags and callbacks
tied to compatible strings. This allows us to extend stmmac with glue
layers for different SoCs.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 44 +++++++++++++++++-----
include/linux/stmmac.h | 18 +++++++++
2 files changed, 52 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 82110f1..bf119db 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -26,8 +26,20 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_net.h>
+#include <linux/of_device.h>
#include "stmmac.h"
+static const struct of_device_id stmmac_dt_ids[] = {
+ /* SoC specific glue layers should come before generic bindings */
+ { .compatible = "st,spear600-gmac"},
+ { .compatible = "snps,dwmac-3.610"},
+ { .compatible = "snps,dwmac-3.70a"},
+ { .compatible = "snps,dwmac-3.710"},
+ { .compatible = "snps,dwmac"},
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
+
#ifdef CONFIG_OF
static int stmmac_probe_config_dt(struct platform_device *pdev,
struct plat_stmmacenet_data *plat,
@@ -35,10 +47,32 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
{
struct device_node *np = pdev->dev.of_node;
struct stmmac_dma_cfg *dma_cfg;
+ const struct of_device_id *device;
if (!np)
return -ENODEV;
+ device = of_match_device(stmmac_dt_ids, &pdev->dev);
+ if (!device)
+ return -ENODEV;
+
+ if (device->data) {
+ const struct stmmac_of_data *data = device->data;
+ plat->has_gmac = data->has_gmac;
+ plat->enh_desc = data->enh_desc;
+ plat->tx_coe = data->tx_coe;
+ plat->rx_coe = data->rx_coe;
+ plat->bugged_jumbo = data->bugged_jumbo;
+ plat->pmt = data->pmt;
+ plat->riwt_off = data->riwt_off;
+ plat->fix_mac_speed = data->fix_mac_speed;
+ plat->bus_setup = data->bus_setup;
+ plat->setup = data->setup;
+ plat->free = data->free;
+ plat->init = data->init;
+ plat->exit = data->exit;
+ }
+
*mac = of_get_mac_address(np);
plat->interface = of_get_phy_mode(np);
@@ -259,16 +293,6 @@ static int stmmac_pltfr_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(stmmac_pltfr_pm_ops,
stmmac_pltfr_suspend, stmmac_pltfr_resume);
-static const struct of_device_id stmmac_dt_ids[] = {
- { .compatible = "st,spear600-gmac"},
- { .compatible = "snps,dwmac-3.610"},
- { .compatible = "snps,dwmac-3.70a"},
- { .compatible = "snps,dwmac-3.710"},
- { .compatible = "snps,dwmac"},
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
-
struct platform_driver stmmac_pltfr_driver = {
.probe = stmmac_pltfr_probe,
.remove = stmmac_pltfr_remove,
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 0a5a7ac..1367974 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -121,4 +121,22 @@ struct plat_stmmacenet_data {
void *custom_data;
void *bsp_priv;
};
+
+/* of_data for SoC glue layer device tree bindings */
+
+struct stmmac_of_data {
+ int has_gmac;
+ int enh_desc;
+ int tx_coe;
+ int rx_coe;
+ int bugged_jumbo;
+ int pmt;
+ int riwt_off;
+ void (*fix_mac_speed)(void *priv, unsigned int speed);
+ void (*bus_setup)(void __iomem *ioaddr);
+ void *(*setup)(struct platform_device *pdev);
+ void (*free)(struct platform_device *pdev, void *priv);
+ int (*init)(struct platform_device *pdev, void *priv);
+ void (*exit)(struct platform_device *pdev, void *priv);
+};
#endif
--
1.8.5.5

273
target/linux/sunxi/patches-3.13/153-7-stmmac-sunxi-extensions-for-a20.patch
View File

@ -1,273 +0,0 @@
From af0bd4e9ba809391f275d0c094ac0bfbfbb3f430 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Fri, 17 Jan 2014 21:24:47 +0800
Subject: [PATCH] net: stmmac: sunxi platform extensions for GMAC in Allwinner
A20 SoC's
The Allwinner A20 has an ethernet controller that seems to be
an early version of Synopsys DesignWare MAC 10/100/1000 Universal,
which is supported by the stmmac driver.
Allwinner's GMAC requires setting additional registers in the SoC's
clock control unit.
The exact version of the DWMAC IP that Allwinner uses is unknown,
thus the exact feature set is unknown.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
.../bindings/net/allwinner,sun7i-a20-gmac.txt | 27 ++++
drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 ++
drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 140 +++++++++++++++++++++
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 3 +
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 3 +
6 files changed, 185 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
new file mode 100644
index 0000000..ea4d752
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
@@ -0,0 +1,27 @@
+* Allwinner GMAC ethernet controller
+
+This device is a platform glue layer for stmmac.
+Please see stmmac.txt for the other unchanged properties.
+
+Required properties:
+ - compatible: Should be "allwinner,sun7i-a20-gmac"
+ - clocks: Should contain the GMAC main clock, and tx clock
+ The tx clock type should be "allwinner,sun7i-a20-gmac-clk"
+ - clock-names: Should contain the clock names "stmmaceth",
+ and "allwinner_gmac_tx"
+
+Optional properties:
+- phy-supply: phandle to a regulator if the PHY needs one
+
+Examples:
+
+ gmac: ethernet@01c50000 {
+ compatible = "allwinner,sun7i-a20-gmac";
+ reg = <0x01c50000 0x10000>,
+ <0x01c20164 0x4>;
+ interrupts = <0 85 1>;
+ interrupt-names = "macirq";
+ clocks = <&ahb_gates 49>, <&gmac_tx>;
+ clock-names = "stmmaceth", "allwinner_gmac_tx";
+ phy-mode = "mii";
+ };
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index b59d1ef..e2f202e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -26,6 +26,17 @@ config STMMAC_PLATFORM
If unsure, say N.
+config DWMAC_SUNXI
+ bool "Allwinner GMAC support"
+ depends on STMMAC_PLATFORM && ARCH_SUNXI
+ default y
+ ---help---
+ Support for Allwinner A20/A31 GMAC ethernet controllers.
+
+ This selects Allwinner SoC glue layer support for the
+ stmmac device driver. This driver is used for A20/A31
+ GMAC ethernet controller.
+
config STMMAC_PCI
bool "STMMAC PCI bus support"
depends on STMMAC_ETH && PCI
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index 356a9dd..ecadece 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -1,6 +1,7 @@
obj-$(CONFIG_STMMAC_ETH) += stmmac.o
stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o
stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o
+stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o \
chain_mode.o dwmac_lib.o dwmac1000_core.o dwmac1000_dma.o \
dwmac100_core.o dwmac100_dma.o enh_desc.o norm_desc.o \
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
new file mode 100644
index 0000000..771cd15f
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -0,0 +1,140 @@
+/**
+ * dwmac-sunxi.c - Allwinner sunxi DWMAC specific glue layer
+ *
+ * Copyright (C) 2013 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/stmmac.h>
+#include <linux/clk.h>
+#include <linux/phy.h>
+#include <linux/of_net.h>
+#include <linux/regulator/consumer.h>
+
+struct sunxi_priv_data {
+ int interface;
+ int clk_enabled;
+ struct clk *tx_clk;
+ struct regulator *regulator;
+};
+
+static void *sun7i_gmac_setup(struct platform_device *pdev)
+{
+ struct sunxi_priv_data *gmac;
+ struct device *dev = &pdev->dev;
+
+ gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
+ if (!gmac)
+ return ERR_PTR(-ENOMEM);
+
+ gmac->interface = of_get_phy_mode(dev->of_node);
+
+ gmac->tx_clk = devm_clk_get(dev, "allwinner_gmac_tx");
+ if (IS_ERR(gmac->tx_clk)) {
+ dev_err(dev, "could not get tx clock\n");
+ return gmac->tx_clk;
+ }
+
+ /* Optional regulator for PHY */
+ gmac->regulator = devm_regulator_get_optional(dev, "phy");
+ if (IS_ERR(gmac->regulator)) {
+ if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER)
+ return ERR_PTR(-EPROBE_DEFER);
+ dev_info(dev, "no regulator found\n");
+ gmac->regulator = NULL;
+ }
+
+ return gmac;
+}
+
+#define SUN7I_GMAC_GMII_RGMII_RATE 125000000
+#define SUN7I_GMAC_MII_RATE 25000000
+
+static int sun7i_gmac_init(struct platform_device *pdev, void *priv)
+{
+ struct sunxi_priv_data *gmac = priv;
+ int ret;
+
+ if (gmac->regulator) {
+ ret = regulator_enable(gmac->regulator);
+ if (ret)
+ return ret;
+ }
+
+ /* Set GMAC interface port mode
+ *
+ * The GMAC TX clock lines are configured by setting the clock
+ * rate, which then uses the auto-reparenting feature of the
+ * clock driver, and enabling/disabling the clock.
+ */
+ if (gmac->interface == PHY_INTERFACE_MODE_RGMII) {
+ clk_set_rate(gmac->tx_clk, SUN7I_GMAC_GMII_RGMII_RATE);
+ clk_prepare_enable(gmac->tx_clk);
+ gmac->clk_enabled = 1;
+ } else {
+ clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE);
+ clk_prepare(gmac->tx_clk);
+ }
+
+ return 0;
+}
+
+static void sun7i_gmac_exit(struct platform_device *pdev, void *priv)
+{
+ struct sunxi_priv_data *gmac = priv;
+
+ if (gmac->clk_enabled) {
+ clk_disable(gmac->tx_clk);
+ gmac->clk_enabled = 0;
+ }
+ clk_unprepare(gmac->tx_clk);
+
+ if (gmac->regulator)
+ regulator_disable(gmac->regulator);
+}
+
+static void sun7i_fix_speed(void *priv, unsigned int speed)
+{
+ struct sunxi_priv_data *gmac = priv;
+
+ /* only GMII mode requires us to reconfigure the clock lines */
+ if (gmac->interface != PHY_INTERFACE_MODE_GMII)
+ return;
+
+ if (gmac->clk_enabled) {
+ clk_disable(gmac->tx_clk);
+ gmac->clk_enabled = 0;
+ }
+ clk_unprepare(gmac->tx_clk);
+
+ if (speed == 1000) {
+ clk_set_rate(gmac->tx_clk, SUN7I_GMAC_GMII_RGMII_RATE);
+ clk_prepare_enable(gmac->tx_clk);
+ gmac->clk_enabled = 1;
+ } else {
+ clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE);
+ clk_prepare(gmac->tx_clk);
+ }
+}
+
+/* of_data specifying hardware features and callbacks.
+ * hardware features were copied from Allwinner drivers. */
+const struct stmmac_of_data sun7i_gmac_data = {
+ .has_gmac = 1,
+ .tx_coe = 1,
+ .fix_mac_speed = sun7i_fix_speed,
+ .setup = sun7i_gmac_setup,
+ .init = sun7i_gmac_init,
+ .exit = sun7i_gmac_exit,
+};
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index c1c141f..d9af26e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -130,6 +130,9 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
bool stmmac_eee_init(struct stmmac_priv *priv);
#ifdef CONFIG_STMMAC_PLATFORM
+#ifdef CONFIG_DWMAC_SUNXI
+extern const struct stmmac_of_data sun7i_gmac_data;
+#endif
extern struct platform_driver stmmac_pltfr_driver;
static inline int stmmac_register_platform(void)
{
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index bf119db..9d4baa8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -30,6 +30,9 @@
#include "stmmac.h"
static const struct of_device_id stmmac_dt_ids[] = {
+#ifdef CONFIG_DWMAC_SUNXI
+ { .compatible = "allwinner,sun7i-a20-gmac", .data = &sun7i_gmac_data},
+#endif
/* SoC specific glue layers should come before generic bindings */
{ .compatible = "st,spear600-gmac"},
{ .compatible = "snps,dwmac-3.610"},
--
1.8.5.5

45
target/linux/sunxi/patches-3.13/160-1-phy-core-phy_get_leave-error-logging-to-caller.patch
View File

@ -1,45 +0,0 @@
From cc8e5932c671ba2d3ce511a15c19c47b015bc4ab Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sun, 5 Jan 2014 00:00:30 +0100
Subject: [PATCH] phy-core: phy_get: Leave error logging to the caller
In various cases errors may be expected, ie probe-deferral or a call to
phy_get from a driver where the use of a phy is optional.
Rather then adding all sort of complicated checks for this, and/or adding
special functions like devm_phy_get_optional, simply don't log an error,
and let deciding if get_phy returning an error really should result in a
dev_err up to the caller.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/phy/phy-core.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 5f5b0f4..b355553 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -404,17 +404,11 @@ struct phy *phy_get(struct device *dev, const char *string)
index = of_property_match_string(dev->of_node, "phy-names",
string);
phy = of_phy_get(dev, index);
- if (IS_ERR(phy)) {
- dev_err(dev, "unable to find phy\n");
- return phy;
- }
} else {
phy = phy_lookup(dev, string);
- if (IS_ERR(phy)) {
- dev_err(dev, "unable to find phy\n");
- return phy;
- }
}
+ if (IS_ERR(phy))
+ return phy;
if (!try_module_get(phy->ops->owner))
return ERR_PTR(-EPROBE_DEFER);
--
1.8.5.5

40
target/linux/sunxi/patches-3.13/160-2-phy-core-dont-porpagate-ENOSUPP.patch
View File

@ -1,40 +0,0 @@
From 37e3cce7288f7d5c34ae630f16faf48bd3d01c18 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sun, 5 Jan 2014 22:40:39 +0100
Subject: [PATCH] phy-core: Don't propagate -ENOSUPP from
phy_pm_runtime_get_sync to caller
The phy-core allows phy_init and phy_power_on to be called multiple times,
but before this patch -ENOSUPP from phy_pm_runtime_get_sync would be
propagated to the caller for the 2nd and later calls.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/phy/phy-core.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index b355553..6c73837 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -176,6 +176,8 @@ int phy_init(struct phy *phy)
dev_err(&phy->dev, "phy init failed --> %d\n", ret);
goto out;
}
+ } else {
+ ret = 0; /* Override possible ret == -ENOTSUPP */
}
++phy->init_count;
@@ -232,6 +234,8 @@ int phy_power_on(struct phy *phy)
dev_err(&phy->dev, "phy poweron failed --> %d\n", ret);
goto out;
}
+ } else {
+ ret = 0; /* Override possible ret == -ENOTSUPP */
}
++phy->power_count;
mutex_unlock(&phy->mutex);
--
1.8.5.5

48
target/linux/sunxi/patches-3.13/160-3-phy-core-no-module-build.patch
View File

@ -1,48 +0,0 @@
From 87c01c9ef0602abaa909771c6c6eab1f4c2c384d Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Tue, 11 Feb 2014 16:55:57 +0100
Subject: [PATCH] phy-core: Don't allow building phy-core as a module
include/phy/phy.h has stub code in there for when building without the
phy-core enabled. This is useful for generic drivers such as ahci-platform,
ehci-platoform and ohci-platform which have support for driving an optional
phy passed to them through the devicetree.
Since on some boards this phy functionality is not needed, being able to
disable the phy subsystem without needing a lot of #ifdef magic in the
driver using it is quite useful.
However this breaks when the module using the phy subsystem is build-in and
the phy-core is not, which leads to the build failing with missing symbol
errors in the linking stage of the zImage.
Which leads to gems such as this being added to the Kconfig for achi_platform:
depends on GENERIC_PHY || !GENERIC_PHY
Rather then duplicating this code in a lot of places using the phy-core,
I believe it is better to simply not allow the phy-core to be built as a
module. The phy core is quite small and has no external dependencies, so
always building it in when enabling it should not be an issue.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/phy/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index afa2354..4ef8755 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -5,7 +5,7 @@
menu "PHY Subsystem"
config GENERIC_PHY
- tristate "PHY Core"
+ bool "PHY Core"
help
Generic PHY support.
--
1.8.5.5

222
target/linux/sunxi/patches-3.13/160-4-libahci-allow-override-start_engine.patch
View File

@ -1,222 +0,0 @@
From 9b10bc9f84fc221fcef9ddca92972af9b442f49d Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 2 Dec 2013 16:13:32 +0100
Subject: [PATCH] libahci: Allow drivers to override start_engine
Allwinner A10 and A20 ARM SoCs have an AHCI sata controller which needs a
special register to be poked before starting the DMA engine.
This register gets reset on an ahci_stop_engine call, so there is no other
place then ahci_start_engine where this poking can be done.
This commit allows drivers to override ahci_start_engine behavior for use by
the Allwinner AHCI driver (and potentially other drivers in the future).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/ata/ahci.c | 6 ++++--
drivers/ata/ahci.h | 6 ++++++
drivers/ata/libahci.c | 26 +++++++++++++++++++-------
drivers/ata/sata_highbank.c | 3 ++-
4 files changed, 31 insertions(+), 10 deletions(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index dc2756f..eda68b4 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -564,6 +564,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
bool online;
int rc;
@@ -574,7 +575,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
deadline, &online, NULL);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
@@ -589,6 +590,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
{
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
@@ -604,7 +606,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
deadline, &online, NULL);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
/* The pseudo configuration device on SIMG4726 attached to
* ASUS P5W-DH Deluxe doesn't send signature FIS after
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 2289efd..64d1a99d 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -323,6 +323,12 @@ struct ahci_host_priv {
u32 em_msg_type; /* EM message type */
struct clk *clk; /* Only for platforms supporting clk */
void *plat_data; /* Other platform data */
+ /*
+ * Optional ahci_start_engine override, if not set this gets set to the
+ * default ahci_start_engine during ahci_save_initial_config, this can
+ * be overridden anytime before the host is activated.
+ */
+ void (*start_engine)(struct ata_port *ap);
};
extern int ahci_ignore_sss;
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 36605ab..f839bb3 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -394,6 +394,9 @@ static ssize_t ahci_show_em_supported(struct device *dev,
*
* If inconsistent, config values are fixed up by this function.
*
+ * If it is not set already this function sets hpriv->start_engine to
+ * ahci_start_engine.
+ *
* LOCKING:
* None.
*/
@@ -500,6 +503,9 @@ void ahci_save_initial_config(struct device *dev,
hpriv->cap = cap;
hpriv->cap2 = cap2;
hpriv->port_map = port_map;
+
+ if (!hpriv->start_engine)
+ hpriv->start_engine = ahci_start_engine;
}
EXPORT_SYMBOL_GPL(ahci_save_initial_config);
@@ -766,7 +772,7 @@ static void ahci_start_port(struct ata_port *ap)
/* enable DMA */
if (!(hpriv->flags & AHCI_HFLAG_DELAY_ENGINE))
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
/* turn on LEDs */
if (ap->flags & ATA_FLAG_EM) {
@@ -1234,7 +1240,7 @@ int ahci_kick_engine(struct ata_port *ap)
/* restart engine */
out_restart:
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
return rc;
}
EXPORT_SYMBOL_GPL(ahci_kick_engine);
@@ -1426,6 +1432,7 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
@@ -1443,7 +1450,7 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
rc = sata_link_hardreset(link, timing, deadline, &online,
ahci_check_ready);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
if (online)
*class = ahci_dev_classify(ap);
@@ -2007,10 +2014,12 @@ static void ahci_thaw(struct ata_port *ap)
void ahci_error_handler(struct ata_port *ap)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
/* restart engine */
ahci_stop_engine(ap);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
}
sata_pmp_error_handler(ap);
@@ -2031,6 +2040,7 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
struct ata_device *dev = ap->link.device;
u32 devslp, dm, dito, mdat, deto;
@@ -2094,7 +2104,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
PORT_DEVSLP_ADSE);
writel(devslp, port_mmio + PORT_DEVSLP);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
/* enable device sleep feature for the drive */
err_mask = ata_dev_set_feature(dev,
@@ -2106,6 +2116,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
static void ahci_enable_fbs(struct ata_port *ap)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
struct ahci_port_priv *pp = ap->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 fbs;
@@ -2134,11 +2145,12 @@ static void ahci_enable_fbs(struct ata_port *ap)
} else
dev_err(ap->host->dev, "Failed to enable FBS\n");
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
}
static void ahci_disable_fbs(struct ata_port *ap)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
struct ahci_port_priv *pp = ap->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 fbs;
@@ -2166,7 +2178,7 @@ static void ahci_disable_fbs(struct ata_port *ap)
pp->fbs_enabled = false;
}
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
}
static void ahci_pmp_attach(struct ata_port *ap)
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index 870b11e..b3b18d1 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -403,6 +403,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
static const unsigned long timing[] = { 5, 100, 500};
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
@@ -431,7 +432,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
break;
} while (!online && retry--);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
if (online)
*class = ahci_dev_classify(ap);
--
1.8.5.5

255
target/linux/sunxi/patches-3.13/160-5-ahci-platform-devs-with-more-than-1-clock.patch
View File

@ -1,255 +0,0 @@
From bdad8090b5efdb24fa9db00d8e2891927b68dcec Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Thu, 16 Jan 2014 14:32:35 +0100
Subject: [PATCH] ahci-platform: Add support for devices with more then 1 clock
The allwinner-sun4i AHCI controller needs 2 clocks to be enabled and the
imx AHCI controller needs 3 clocks to be enabled.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
.../devicetree/bindings/ata/ahci-platform.txt | 1 +
drivers/ata/ahci.h | 3 +-
drivers/ata/ahci_platform.c | 119 ++++++++++++++++-----
include/linux/ahci_platform.h | 4 +
4 files changed, 99 insertions(+), 28 deletions(-)
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 89de156..3ced07d 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -10,6 +10,7 @@ Required properties:
Optional properties:
- dma-coherent : Present if dma operations are coherent
+- clocks : a list of phandle + clock specifier pairs
Example:
sata@ffe08000 {
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 64d1a99d..c12862b 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -51,6 +51,7 @@
enum {
AHCI_MAX_PORTS = 32,
+ AHCI_MAX_CLKS = 3,
AHCI_MAX_SG = 168, /* hardware max is 64K */
AHCI_DMA_BOUNDARY = 0xffffffff,
AHCI_MAX_CMDS = 32,
@@ -321,7 +322,7 @@ struct ahci_host_priv {
u32 em_loc; /* enclosure management location */
u32 em_buf_sz; /* EM buffer size in byte */
u32 em_msg_type; /* EM message type */
- struct clk *clk; /* Only for platforms supporting clk */
+ struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
void *plat_data; /* Other platform data */
/*
* Optional ahci_start_engine override, if not set this gets set to the
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 4b231ba..609975d 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -87,6 +87,66 @@ struct ata_port_operations ahci_platform_ops = {
AHCI_SHT("ahci_platform"),
};
+/**
+ * ahci_platform_enable_clks - Enable platform clocks
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all the clks found in hpriv->clks, starting
+ * at index 0. If any clk fails to enable it disables all the clks
+ * already enabled in reverse order, and then returns an error.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
+{
+ int c, rc;
+
+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
+ rc = clk_prepare_enable(hpriv->clks[c]);
+ if (rc)
+ goto disable_unprepare_clk;
+ }
+ return 0;
+
+disable_unprepare_clk:
+ while (--c >= 0)
+ clk_disable_unprepare(hpriv->clks[c]);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
+
+/**
+ * ahci_platform_disable_clks - Disable platform clocks
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all the clks found in hpriv->clks, in reverse
+ * order of ahci_platform_enable_clks (starting at the end of the array).
+ *
+ * LOCKING:
+ * None.
+ */
+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
+{
+ int c;
+
+ for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
+ if (hpriv->clks[c])
+ clk_disable_unprepare(hpriv->clks[c]);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
+
+static void ahci_put_clks(struct ahci_host_priv *hpriv)
+{
+ int c;
+
+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
+ clk_put(hpriv->clks[c]);
+}
+
static int ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -97,6 +157,7 @@ static int ahci_probe(struct platform_device *pdev)
struct ahci_host_priv *hpriv;
struct ata_host *host;
struct resource *mem;
+ struct clk *clk;
int irq;
int n_ports;
int i;
@@ -131,17 +192,31 @@ static int ahci_probe(struct platform_device *pdev)
return -ENOMEM;
}
- hpriv->clk = clk_get(dev, NULL);
- if (IS_ERR(hpriv->clk)) {
- dev_err(dev, "can't get clock\n");
- } else {
- rc = clk_prepare_enable(hpriv->clk);
- if (rc) {
- dev_err(dev, "clock prepare enable failed");
- goto free_clk;
+ for (i = 0; i < AHCI_MAX_CLKS; i++) {
+ /*
+ * For now we must use clk_get(dev, NULL) for the first clock,
+ * because some platforms (da850, spear13xx) are not yet
+ * converted to use devicetree for clocks. For new platforms
+ * this is equivalent to of_clk_get(dev->of_node, 0).
+ */
+ if (i == 0)
+ clk = clk_get(dev, NULL);
+ else
+ clk = of_clk_get(dev->of_node, i);
+
+ if (IS_ERR(clk)) {
+ rc = PTR_ERR(clk);
+ if (rc == -EPROBE_DEFER)
+ goto free_clk;
+ break;
}
+ hpriv->clks[i] = clk;
}
+ rc = ahci_enable_clks(dev, hpriv);
+ if (rc)
+ goto free_clk;
+
/*
* Some platforms might need to prepare for mmio region access,
* which could be done in the following init call. So, the mmio
@@ -222,11 +297,9 @@ static int ahci_probe(struct platform_device *pdev)
if (pdata && pdata->exit)
pdata->exit(dev);
disable_unprepare_clk:
- if (!IS_ERR(hpriv->clk))
- clk_disable_unprepare(hpriv->clk);
+ ahci_disable_clks(hpriv);
free_clk:
- if (!IS_ERR(hpriv->clk))
- clk_put(hpriv->clk);
+ ahci_put_clks(hpriv);
return rc;
}
@@ -239,10 +312,8 @@ static void ahci_host_stop(struct ata_host *host)
if (pdata && pdata->exit)
pdata->exit(dev);
- if (!IS_ERR(hpriv->clk)) {
- clk_disable_unprepare(hpriv->clk);
- clk_put(hpriv->clk);
- }
+ ahci_disable_clks(hpriv);
+ ahci_put_clks(hpriv);
}
#ifdef CONFIG_PM_SLEEP
@@ -277,8 +348,7 @@ static int ahci_suspend(struct device *dev)
if (pdata && pdata->suspend)
return pdata->suspend(dev);
- if (!IS_ERR(hpriv->clk))
- clk_disable_unprepare(hpriv->clk);
+ ahci_disable_clks(hpriv);
return 0;
}
@@ -290,13 +360,9 @@ static int ahci_resume(struct device *dev)
struct ahci_host_priv *hpriv = host->private_data;
int rc;
- if (!IS_ERR(hpriv->clk)) {
- rc = clk_prepare_enable(hpriv->clk);
- if (rc) {
- dev_err(dev, "clock prepare enable failed");
- return rc;
- }
- }
+ rc = ahci_enable_clks(dev, hpriv);
+ if (rc)
+ return rc;
if (pdata && pdata->resume) {
rc = pdata->resume(dev);
@@ -317,8 +383,7 @@ static int ahci_resume(struct device *dev)
return 0;
disable_unprepare_clk:
- if (!IS_ERR(hpriv->clk))
- clk_disable_unprepare(hpriv->clk);
+ ahci_disable_clks(hpriv);
return rc;
}
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index 73a2500..769d065 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -19,6 +19,7 @@
struct device;
struct ata_port_info;
+struct ahci_host_priv;
struct ahci_platform_data {
int (*init)(struct device *dev, void __iomem *addr);
@@ -30,4 +31,7 @@ struct ahci_platform_data {
unsigned int mask_port_map;
};
+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
+
#endif /* _AHCI_PLATFORM_H */
--
1.8.5.5

141
target/linux/sunxi/patches-3.13/160-6-ahci-platform-support-optional-regulator.patch
View File

@ -1,141 +0,0 @@
From ba6850946d9e1959be1b00f6ae06454546350c75 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Fri, 17 Jan 2014 13:23:21 +0100
Subject: [PATCH] ahci-platform: Add support for an optional regulator for
sata-target power
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
.../devicetree/bindings/ata/ahci-platform.txt | 1 +
drivers/ata/ahci.h | 2 ++
drivers/ata/ahci_platform.c | 36 ++++++++++++++++++++--
3 files changed, 37 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 3ced07d..1ac807f 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -11,6 +11,7 @@ Required properties:
Optional properties:
- dma-coherent : Present if dma operations are coherent
- clocks : a list of phandle + clock specifier pairs
+- target-supply : regulator for SATA target power
Example:
sata@ffe08000 {
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index c12862b..bf8100c 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -37,6 +37,7 @@
#include <linux/clk.h>
#include <linux/libata.h>
+#include <linux/regulator/consumer.h>
/* Enclosure Management Control */
#define EM_CTRL_MSG_TYPE 0x000f0000
@@ -323,6 +324,7 @@ struct ahci_host_priv {
u32 em_buf_sz; /* EM buffer size in byte */
u32 em_msg_type; /* EM message type */
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
+ struct regulator *target_pwr; /* Optional */
void *plat_data; /* Other platform data */
/*
* Optional ahci_start_engine override, if not set this gets set to the
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 609975d..907c076 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -192,6 +192,14 @@ static int ahci_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
+ if (IS_ERR(hpriv->target_pwr)) {
+ rc = PTR_ERR(hpriv->target_pwr);
+ if (rc == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ hpriv->target_pwr = NULL;
+ }
+
for (i = 0; i < AHCI_MAX_CLKS; i++) {
/*
* For now we must use clk_get(dev, NULL) for the first clock,
@@ -213,9 +221,15 @@ static int ahci_probe(struct platform_device *pdev)
hpriv->clks[i] = clk;
}
+ if (hpriv->target_pwr) {
+ rc = regulator_enable(hpriv->target_pwr);
+ if (rc)
+ goto free_clk;
+ }
+
rc = ahci_enable_clks(dev, hpriv);
if (rc)
- goto free_clk;
+ goto disable_regulator;
/*
* Some platforms might need to prepare for mmio region access,
@@ -298,6 +312,9 @@ static int ahci_probe(struct platform_device *pdev)
pdata->exit(dev);
disable_unprepare_clk:
ahci_disable_clks(hpriv);
+disable_regulator:
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
free_clk:
ahci_put_clks(hpriv);
return rc;
@@ -314,6 +331,9 @@ static void ahci_host_stop(struct ata_host *host)
ahci_disable_clks(hpriv);
ahci_put_clks(hpriv);
+
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
}
#ifdef CONFIG_PM_SLEEP
@@ -350,6 +370,9 @@ static int ahci_suspend(struct device *dev)
ahci_disable_clks(hpriv);
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+
return 0;
}
@@ -360,9 +383,15 @@ static int ahci_resume(struct device *dev)
struct ahci_host_priv *hpriv = host->private_data;
int rc;
+ if (hpriv->target_pwr) {
+ rc = regulator_enable(hpriv->target_pwr);
+ if (rc)
+ return rc;
+ }
+
rc = ahci_enable_clks(dev, hpriv);
if (rc)
- return rc;
+ goto disable_regulator;
if (pdata && pdata->resume) {
rc = pdata->resume(dev);
@@ -384,6 +413,9 @@ static int ahci_resume(struct device *dev)
disable_unprepare_clk:
ahci_disable_clks(hpriv);
+disable_regulator:
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
return rc;
}
--
1.8.5.5

211
target/linux/sunxi/patches-3.13/160-7-ahci-platform-add-resource-helpers.patch
View File

@ -1,211 +0,0 @@
From 05d5a60ae336c122e478cc002afccc880d462b3b Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 20 Jan 2014 14:54:40 +0100
Subject: [PATCH] ahci-platform: Add enable_ / disable_resources helper
functions
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/ata/ahci_platform.c | 112 ++++++++++++++++++++++++++++--------------
include/linux/ahci_platform.h | 2 +
2 files changed, 77 insertions(+), 37 deletions(-)
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 907c076..6ebbc17 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -139,6 +139,68 @@ void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
+/**
+ * ahci_platform_enable_resources - Enable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all ahci_platform managed resources in
+ * the following order:
+ * 1) Regulator
+ * 2) Clocks (through ahci_platform_enable_clks)
+ *
+ * If resource enabling fails at any point the previous enabled
+ * resources are disabled in reverse order.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
+{
+ int rc;
+
+ if (hpriv->target_pwr) {
+ rc = regulator_enable(hpriv->target_pwr);
+ if (rc)
+ return rc;
+ }
+
+ rc = ahci_platform_enable_clks(hpriv);
+ if (rc)
+ goto disable_regulator;
+
+ return 0;
+
+disable_regulator:
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
+
+/**
+ * ahci_platform_disable_resources - Disable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all ahci_platform managed resources in
+ * the following order:
+ * 1) Clocks (through ahci_platform_disable_clks)
+ * 2) Regulator
+ *
+ * LOCKING:
+ * None.
+ */
+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
+{
+ ahci_platform_disable_clks(hpriv);
+
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
+
static void ahci_put_clks(struct ahci_host_priv *hpriv)
{
int c;
@@ -221,15 +283,9 @@ static int ahci_probe(struct platform_device *pdev)
hpriv->clks[i] = clk;
}
- if (hpriv->target_pwr) {
- rc = regulator_enable(hpriv->target_pwr);
- if (rc)
- goto free_clk;
- }
-
- rc = ahci_enable_clks(dev, hpriv);
+ rc = ahci_platform_enable_resources(hpriv);
if (rc)
- goto disable_regulator;
+ goto free_clk;
/*
* Some platforms might need to prepare for mmio region access,
@@ -240,7 +296,7 @@ static int ahci_probe(struct platform_device *pdev)
if (pdata && pdata->init) {
rc = pdata->init(dev, hpriv->mmio);
if (rc)
- goto disable_unprepare_clk;
+ goto disable_resources;
}
ahci_save_initial_config(dev, hpriv,
@@ -310,11 +366,8 @@ static int ahci_probe(struct platform_device *pdev)
pdata_exit:
if (pdata && pdata->exit)
pdata->exit(dev);
-disable_unprepare_clk:
- ahci_disable_clks(hpriv);
-disable_regulator:
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
free_clk:
ahci_put_clks(hpriv);
return rc;
@@ -329,11 +382,8 @@ static void ahci_host_stop(struct ata_host *host)
if (pdata && pdata->exit)
pdata->exit(dev);
- ahci_disable_clks(hpriv);
+ ahci_platform_disable_resources(hpriv);
ahci_put_clks(hpriv);
-
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
}
#ifdef CONFIG_PM_SLEEP
@@ -368,10 +418,7 @@ static int ahci_suspend(struct device *dev)
if (pdata && pdata->suspend)
return pdata->suspend(dev);
- ahci_disable_clks(hpriv);
-
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
+ ahci_platform_disable_resources(hpriv);
return 0;
}
@@ -383,26 +430,20 @@ static int ahci_resume(struct device *dev)
struct ahci_host_priv *hpriv = host->private_data;
int rc;
- if (hpriv->target_pwr) {
- rc = regulator_enable(hpriv->target_pwr);
- if (rc)
- return rc;
- }
-
- rc = ahci_enable_clks(dev, hpriv);
+ rc = ahci_platform_enable_resources(hpriv);
if (rc)
- goto disable_regulator;
+ return rc;
if (pdata && pdata->resume) {
rc = pdata->resume(dev);
if (rc)
- goto disable_unprepare_clk;
+ goto disable_resources;
}
if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
rc = ahci_reset_controller(host);
if (rc)
- goto disable_unprepare_clk;
+ goto disable_resources;
ahci_init_controller(host);
}
@@ -411,11 +452,8 @@ static int ahci_resume(struct device *dev)
return 0;
-disable_unprepare_clk:
- ahci_disable_clks(hpriv);
-disable_regulator:
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
return rc;
}
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index 769d065..b674b01 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -33,5 +33,7 @@ struct ahci_platform_data {
int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv);
+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv);
#endif /* _AHCI_PLATFORM_H */
--
1.8.5.5

344
target/linux/sunxi/patches-3.13/160-8-ahci-plat-libraryise-ahci_probe.patch
View File

@ -1,344 +0,0 @@
From 98601575da5276173233dd575bdd61cccdeb861a Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 20 Jan 2014 14:58:04 +0100
Subject: [PATCH] ahci-platform: "Library-ise" ahci_probe functionality
ahci_probe consists of 3 steps:
1) Get resources (get mmio, clks, regulator)
2) Enable resources, handled by ahci_platform_enable_resouces
3) The more or less standard ahci-host controller init sequence
This commit refactors step 1 and 3 into separate functions, so the platform
drivers for AHCI implementations which need a specific order in step 2,
and / or need to do some custom register poking at some time, can re-use
ahci-platform.c code without needing to copy and paste it.
Note that ahci_platform_init_host's prototype takes the 3 non function
members of ahci_platform_data as arguments, the idea is that drivers using
the new exported utility functions will not use ahci_platform_data at all,
and hopefully in the future ahci_platform_data can go away entirely.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/ata/ahci_platform.c | 195 ++++++++++++++++++++++++++++--------------
include/linux/ahci_platform.h | 14 +++
2 files changed, 144 insertions(+), 65 deletions(-)
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 6ebbc17..7f3f2ac 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -201,64 +201,64 @@ void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
-static void ahci_put_clks(struct ahci_host_priv *hpriv)
+static void ahci_platform_put_resources(struct device *dev, void *res)
{
+ struct ahci_host_priv *hpriv = res;
int c;
for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
clk_put(hpriv->clks[c]);
}
-static int ahci_probe(struct platform_device *pdev)
+/**
+ * ahci_platform_get_resources - Get platform resources
+ * @pdev: platform device to get resources for
+ *
+ * This function allocates an ahci_host_priv struct, and gets the
+ * following resources, storing a reference to them inside the returned
+ * struct:
+ *
+ * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
+ * 2) regulator for controlling the targets power (optional)
+ * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
+ * or for non devicetree enabled platforms a single clock
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
+ */
+struct ahci_host_priv *ahci_platform_get_resources(
+ struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
- const struct platform_device_id *id = platform_get_device_id(pdev);
- struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0];
- const struct ata_port_info *ppi[] = { &pi, NULL };
struct ahci_host_priv *hpriv;
- struct ata_host *host;
- struct resource *mem;
struct clk *clk;
- int irq;
- int n_ports;
- int i;
- int rc;
+ int i, rc = -ENOMEM;
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(dev, "no mmio space\n");
- return -EINVAL;
- }
+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
+ return ERR_PTR(-ENOMEM);
- irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- dev_err(dev, "no irq\n");
- return -EINVAL;
- }
+ hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
+ GFP_KERNEL);
+ if (!hpriv)
+ goto err_out;
- if (pdata && pdata->ata_port_info)
- pi = *pdata->ata_port_info;
+ devres_add(dev, hpriv);
- hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
- if (!hpriv) {
- dev_err(dev, "can't alloc ahci_host_priv\n");
- return -ENOMEM;
- }
-
- hpriv->flags |= (unsigned long)pi.private_data;
-
- hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
+ hpriv->mmio = devm_ioremap_resource(dev,
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
if (!hpriv->mmio) {
- dev_err(dev, "can't map %pR\n", mem);
- return -ENOMEM;
+ dev_err(dev, "no mmio space\n");
+ goto err_out;
}
hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
if (IS_ERR(hpriv->target_pwr)) {
rc = PTR_ERR(hpriv->target_pwr);
if (rc == -EPROBE_DEFER)
- return -EPROBE_DEFER;
+ goto err_out;
hpriv->target_pwr = NULL;
}
@@ -277,33 +277,62 @@ static int ahci_probe(struct platform_device *pdev)
if (IS_ERR(clk)) {
rc = PTR_ERR(clk);
if (rc == -EPROBE_DEFER)
- goto free_clk;
+ goto err_out;
break;
}
hpriv->clks[i] = clk;
}
- rc = ahci_platform_enable_resources(hpriv);
- if (rc)
- goto free_clk;
+ devres_remove_group(dev, NULL);
+ return hpriv;
- /*
- * Some platforms might need to prepare for mmio region access,
- * which could be done in the following init call. So, the mmio
- * region shouldn't be accessed before init (if provided) has
- * returned successfully.
- */
- if (pdata && pdata->init) {
- rc = pdata->init(dev, hpriv->mmio);
- if (rc)
- goto disable_resources;
- }
+err_out:
+ devres_release_group(dev, NULL);
+ return ERR_PTR(rc);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
+
+/**
+ * ahci_platform_init_host - Bring up an ahci-platform host
+ * @pdev: platform device pointer for the host
+ * @hpriv: ahci-host private data for the host
+ * @pi_template: template for the ata_port_info to use
+ * @force_port_map: param passed to ahci_save_initial_config
+ * @mask_port_map: param passed to ahci_save_initial_config
+ *
+ * This function does all the usual steps needed to bring up an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be initialized / enabled before calling this.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_init_host(struct platform_device *pdev,
+ struct ahci_host_priv *hpriv,
+ const struct ata_port_info *pi_template,
+ unsigned int force_port_map,
+ unsigned int mask_port_map)
+{
+ struct device *dev = &pdev->dev;
+ struct ata_port_info pi = *pi_template;
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct ata_host *host;
+ int i, irq, n_ports, rc;
- ahci_save_initial_config(dev, hpriv,
- pdata ? pdata->force_port_map : 0,
- pdata ? pdata->mask_port_map : 0);
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(dev, "no irq\n");
+ return -EINVAL;
+ }
/* prepare host */
+ hpriv->flags |= (unsigned long)pi.private_data;
+
+ ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map);
+
if (hpriv->cap & HOST_CAP_NCQ)
pi.flags |= ATA_FLAG_NCQ;
@@ -320,10 +349,8 @@ static int ahci_probe(struct platform_device *pdev)
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
host = ata_host_alloc_pinfo(dev, ppi, n_ports);
- if (!host) {
- rc = -ENOMEM;
- goto pdata_exit;
- }
+ if (!host)
+ return -ENOMEM;
host->private_data = hpriv;
@@ -338,7 +365,8 @@ static int ahci_probe(struct platform_device *pdev)
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
- ata_port_desc(ap, "mmio %pR", mem);
+ ata_port_desc(ap, "mmio %pR",
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
/* set enclosure management message type */
@@ -352,13 +380,53 @@ static int ahci_probe(struct platform_device *pdev)
rc = ahci_reset_controller(host);
if (rc)
- goto pdata_exit;
+ return rc;
ahci_init_controller(host);
ahci_print_info(host, "platform");
- rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
- &ahci_platform_sht);
+ return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
+ &ahci_platform_sht);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_init_host);
+
+static int ahci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ const struct platform_device_id *id = platform_get_device_id(pdev);
+ const struct ata_port_info *pi_template;
+ struct ahci_host_priv *hpriv;
+ int rc;
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ /*
+ * Some platforms might need to prepare for mmio region access,
+ * which could be done in the following init call. So, the mmio
+ * region shouldn't be accessed before init (if provided) has
+ * returned successfully.
+ */
+ if (pdata && pdata->init) {
+ rc = pdata->init(dev, hpriv->mmio);
+ if (rc)
+ goto disable_resources;
+ }
+
+ if (pdata && pdata->ata_port_info)
+ pi_template = pdata->ata_port_info;
+ else
+ pi_template = &ahci_port_info[id ? id->driver_data : 0];
+
+ rc = ahci_platform_init_host(pdev, hpriv, pi_template,
+ pdata ? pdata->force_port_map : 0,
+ pdata ? pdata->mask_port_map : 0);
if (rc)
goto pdata_exit;
@@ -368,8 +436,6 @@ static int ahci_probe(struct platform_device *pdev)
pdata->exit(dev);
disable_resources:
ahci_platform_disable_resources(hpriv);
-free_clk:
- ahci_put_clks(hpriv);
return rc;
}
@@ -383,7 +449,6 @@ static void ahci_host_stop(struct ata_host *host)
pdata->exit(dev);
ahci_platform_disable_resources(hpriv);
- ahci_put_clks(hpriv);
}
#ifdef CONFIG_PM_SLEEP
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index b674b01..b80c51c 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -20,7 +20,14 @@
struct device;
struct ata_port_info;
struct ahci_host_priv;
+struct platform_device;
+/*
+ * Note ahci_platform_data is deprecated, it is only kept around for use
+ * by the old da850 and spear13xx ahci code.
+ * New drivers should instead declare their own platform_driver struct, and
+ * use ahci_platform* functions in their own probe, suspend and resume methods.
+ */
struct ahci_platform_data {
int (*init)(struct device *dev, void __iomem *addr);
void (*exit)(struct device *dev);
@@ -35,5 +42,12 @@ struct ahci_platform_data {
void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
int ahci_platform_enable_resources(struct ahci_host_priv *hpriv);
void ahci_platform_disable_resources(struct ahci_host_priv *hpriv);
+struct ahci_host_priv *ahci_platform_get_resources(
+ struct platform_device *pdev);
+int ahci_platform_init_host(struct platform_device *pdev,
+ struct ahci_host_priv *hpriv,
+ const struct ata_port_info *pi_template,
+ unsigned int force_port_map,
+ unsigned int mask_port_map);
#endif /* _AHCI_PLATFORM_H */
--
1.8.5.5

188
target/linux/sunxi/patches-3.13/160-9-ahci-plat-libraryise-suspend-resume.patch
View File

@ -1,188 +0,0 @@
From 041cf8356a4eb91ee8118004b2bc9c78cdd7866c Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 20 Jan 2014 15:52:07 +0100
Subject: [PATCH] ahci-platform: "Library-ise" suspend / resume functionality
Split suspend / resume code into host suspend / resume functionality and
resource enable / disabling phases, and export the new suspend_ / resume_host
functions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/ata/ahci_platform.c | 109 ++++++++++++++++++++++++++++++++++++------
include/linux/ahci_platform.h | 5 ++
2 files changed, 99 insertions(+), 15 deletions(-)
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 7f3f2ac..bdadec1 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -452,14 +452,26 @@ static void ahci_host_stop(struct ata_host *host)
}
#ifdef CONFIG_PM_SLEEP
-static int ahci_suspend(struct device *dev)
+/**
+ * ahci_platform_suspend_host - Suspend an ahci-platform host
+ * @dev: device pointer for the host
+ *
+ * This function does all the usual steps needed to suspend an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be disabled after calling this.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend_host(struct device *dev)
{
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
u32 ctl;
- int rc;
if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
dev_err(dev, "firmware update required for suspend/resume\n");
@@ -476,7 +488,64 @@ static int ahci_suspend(struct device *dev)
writel(ctl, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
- rc = ata_host_suspend(host, PMSG_SUSPEND);
+ return ata_host_suspend(host, PMSG_SUSPEND);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
+
+/**
+ * ahci_platform_resume_host - Resume an ahci-platform host
+ * @dev: device pointer for the host
+ *
+ * This function does all the usual steps needed to resume an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be initialized / enabled before calling this.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_resume_host(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ int rc;
+
+ if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ }
+
+ ata_host_resume(host);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
+
+/**
+ * ahci_platform_suspend - Suspend an ahci-platform device
+ * @dev: the platform device to suspend
+ *
+ * This function suspends the host associated with the device, followed
+ * by disabling all the resources of the device.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend(struct device *dev)
+{
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+ rc = ahci_platform_suspend_host(dev);
if (rc)
return rc;
@@ -487,8 +556,22 @@ static int ahci_suspend(struct device *dev)
return 0;
}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend);
-static int ahci_resume(struct device *dev)
+/**
+ * ahci_platform_resume - Resume an ahci-platform device
+ * @dev: the platform device to resume
+ *
+ * This function enables all the resources of the device followed by
+ * resuming the host associated with the device.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_resume(struct device *dev)
{
struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct ata_host *host = dev_get_drvdata(dev);
@@ -505,15 +588,9 @@ static int ahci_resume(struct device *dev)
goto disable_resources;
}
- if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
- rc = ahci_reset_controller(host);
- if (rc)
- goto disable_resources;
-
- ahci_init_controller(host);
- }
-
- ata_host_resume(host);
+ rc = ahci_platform_resume_host(dev);
+ if (rc)
+ goto disable_resources;
return 0;
@@ -522,9 +599,11 @@ static int ahci_resume(struct device *dev)
return rc;
}
+EXPORT_SYMBOL_GPL(ahci_platform_resume);
#endif
-static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_suspend, ahci_resume);
+static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
+ ahci_platform_resume);
static const struct of_device_id ahci_of_match[] = {
{ .compatible = "snps,spear-ahci", },
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index b80c51c..542f268 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -50,4 +50,9 @@ int ahci_platform_init_host(struct platform_device *pdev,
unsigned int force_port_map,
unsigned int mask_port_map);
+int ahci_platform_suspend_host(struct device *dev);
+int ahci_platform_resume_host(struct device *dev);
+int ahci_platform_suspend(struct device *dev);
+int ahci_platform_resume(struct device *dev);
+
#endif /* _AHCI_PLATFORM_H */
--
1.8.5.5

352
target/linux/sunxi/patches-3.13/161-ahci-add-sunxi-to-ahci_platform.patch
View File

@ -1,352 +0,0 @@
From 93dd2c512a24c552f1146d746aac112da7677430 Mon Sep 17 00:00:00 2001
From: Olliver Schinagl <oliver@schinagl.nl>
Date: Sat, 18 Jan 2014 15:00:45 +0100
Subject: [PATCH] ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to
ahci_platform
This patch adds support for the ahci sata controler found on Allwinner A10
and A20 SoCs to the ahci_platform driver.
Orignally written by Olliver Schinagl using the approach of having a platform
device which probe method creates a new child platform device which gets
driven by ahci_platform.c, as done by ahci_imx.c .
Refactored by Hans de Goede to add most of the non sunxi specific functionality
to ahci_platform.c and use a platform_data pointer from of_device_id for the
sunxi specific bits.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
.../devicetree/bindings/ata/ahci-platform.txt | 15 +-
drivers/ata/Kconfig | 9 +
drivers/ata/Makefile | 1 +
drivers/ata/ahci_sunxi.c | 249 +++++++++++++++++++++
4 files changed, 271 insertions(+), 3 deletions(-)
create mode 100644 drivers/ata/ahci_sunxi.c
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 1ac807f..499bfed 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -4,7 +4,9 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
Each SATA controller should have its own node.
Required properties:
-- compatible : compatible list, contains "snps,spear-ahci"
+- compatible : compatible list, one of "snps,spear-ahci",
+ "snps,exynos5440-ahci", "ibm,476gtr-ahci", or
+ "allwinner,sun4i-a10-ahci"
- interrupts : <interrupt mapping for SATA IRQ>
- reg : <registers mapping>
@@ -13,10 +15,17 @@ Optional properties:
- clocks : a list of phandle + clock specifier pairs
- target-supply : regulator for SATA target power
-Example:
+Examples:
sata@ffe08000 {
compatible = "snps,spear-ahci";
reg = <0xffe08000 0x1000>;
interrupts = <115>;
-
};
+
+ ahci: sata@01c18000 {
+ compatible = "allwinner,sun4i-a10-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <56>;
+ clocks = <&pll6 0>, <&ahb_gates 25>;
+ target-supply = <&reg_ahci_5v>;
+ };
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 4e73772..cc67cc0 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -106,6 +106,15 @@ config AHCI_IMX
If unsure, say N.
+config AHCI_SUNXI
+ tristate "Allwinner sunxi AHCI SATA support"
+ depends on ARCH_SUNXI && SATA_AHCI_PLATFORM
+ help
+ This option enables support for the Allwinner sunxi SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 46518c6..246050b 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o
+obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o
# SFF w/ custom DMA
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c
new file mode 100644
index 0000000..001f7dfc
--- /dev/null
+++ b/drivers/ata/ahci_sunxi.c
@@ -0,0 +1,249 @@
+/*
+ * Allwinner sunxi AHCI SATA platform driver
+ * Copyright 2013 Olliver Schinagl <oliver@schinagl.nl>
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
+ * Based on code from Allwinner Technology Co., Ltd. <www.allwinnertech.com>,
+ * Daniel Wang <danielwang@allwinnertech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/ahci_platform.h>
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include "ahci.h"
+
+#define AHCI_BISTAFR 0x00a0
+#define AHCI_BISTCR 0x00a4
+#define AHCI_BISTFCTR 0x00a8
+#define AHCI_BISTSR 0x00ac
+#define AHCI_BISTDECR 0x00b0
+#define AHCI_DIAGNR0 0x00b4
+#define AHCI_DIAGNR1 0x00b8
+#define AHCI_OOBR 0x00bc
+#define AHCI_PHYCS0R 0x00c0
+#define AHCI_PHYCS1R 0x00c4
+#define AHCI_PHYCS2R 0x00c8
+#define AHCI_TIMER1MS 0x00e0
+#define AHCI_GPARAM1R 0x00e8
+#define AHCI_GPARAM2R 0x00ec
+#define AHCI_PPARAMR 0x00f0
+#define AHCI_TESTR 0x00f4
+#define AHCI_VERSIONR 0x00f8
+#define AHCI_IDR 0x00fc
+#define AHCI_RWCR 0x00fc
+#define AHCI_P0DMACR 0x0170
+#define AHCI_P0PHYCR 0x0178
+#define AHCI_P0PHYSR 0x017c
+
+static void sunxi_clrbits(void __iomem *reg, u32 clr_val)
+{
+ u32 reg_val;
+
+ reg_val = readl(reg);
+ reg_val &= ~(clr_val);
+ writel(reg_val, reg);
+}
+
+static void sunxi_setbits(void __iomem *reg, u32 set_val)
+{
+ u32 reg_val;
+
+ reg_val = readl(reg);
+ reg_val |= set_val;
+ writel(reg_val, reg);
+}
+
+static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val)
+{
+ u32 reg_val;
+
+ reg_val = readl(reg);
+ reg_val &= ~(clr_val);
+ reg_val |= set_val;
+ writel(reg_val, reg);
+}
+
+static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift)
+{
+ return (readl(reg) >> shift) & mask;
+}
+
+static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
+{
+ u32 reg_val;
+ int timeout;
+
+ /* This magic is from the original code */
+ writel(0, reg_base + AHCI_RWCR);
+ mdelay(5);
+
+ sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
+ (0x7 << 24),
+ (0x5 << 24) | BIT(23) | BIT(18));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS1R,
+ (0x3 << 16) | (0x1f << 8) | (0x3 << 6),
+ (0x2 << 16) | (0x6 << 8) | (0x2 << 6));
+ sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15));
+ sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
+ (0x7 << 20), (0x3 << 20));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS2R,
+ (0x1f << 5), (0x19 << 5));
+ mdelay(5);
+
+ sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
+
+ timeout = 250; /* Power up takes aprox 50 us */
+ do {
+ reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28);
+ if (reg_val == 0x02)
+ break;
+
+ if (--timeout == 0) {
+ dev_err(dev, "PHY power up failed.\n");
+ return -EIO;
+ }
+ udelay(1);
+ } while (1);
+
+ sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24));
+
+ timeout = 100; /* Calibration takes aprox 10 us */
+ do {
+ reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24);
+ if (reg_val == 0x00)
+ break;
+
+ if (--timeout == 0) {
+ dev_err(dev, "PHY calibration failed.\n");
+ return -EIO;
+ }
+ udelay(1);
+ } while (1);
+
+ mdelay(15);
+
+ writel(0x7, reg_base + AHCI_RWCR);
+
+ return 0;
+}
+
+static void ahci_sunxi_start_engine(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ /* Setup DMA before DMA start */
+ sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ff00, 0x00004400);
+
+ /* Start DMA */
+ sunxi_setbits(port_mmio + PORT_CMD, PORT_CMD_START);
+}
+
+static const struct ata_port_info ahci_sunxi_port_info = {
+ AHCI_HFLAGS(AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
+ AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ),
+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_platform_ops,
+};
+
+static int ahci_sunxi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ int rc;
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ hpriv->start_engine = ahci_sunxi_start_engine;
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ rc = ahci_sunxi_phy_init(dev, hpriv->mmio);
+ if (rc)
+ goto disable_resources;
+
+ rc = ahci_platform_init_host(pdev, hpriv, &ahci_sunxi_port_info, 0, 0);
+ if (rc)
+ goto disable_resources;
+
+ return 0;
+
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+ return rc;
+}
+
+#ifdef CONFIG_PM_SLEEP
+int ahci_sunxi_resume(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ rc = ahci_sunxi_phy_init(dev, hpriv->mmio);
+ if (rc)
+ goto disable_resources;
+
+ rc = ahci_platform_resume_host(dev);
+ if (rc)
+ goto disable_resources;
+
+ return 0;
+
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+ return rc;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ahci_sunxi_pm_ops, ahci_platform_suspend,
+ ahci_sunxi_resume);
+
+static const struct of_device_id ahci_sunxi_of_match[] = {
+ { .compatible = "allwinner,sun4i-a10-ahci", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ahci_sunxi_of_match);
+
+static struct platform_driver ahci_sunxi_driver = {
+ .probe = ahci_sunxi_probe,
+ .remove = ata_platform_remove_one,
+ .driver = {
+ .name = "ahci-sunxi",
+ .owner = THIS_MODULE,
+ .of_match_table = ahci_sunxi_of_match,
+ .pm = &ahci_sunxi_pm_ops,
+ },
+};
+module_platform_driver(ahci_sunxi_driver);
+
+MODULE_DESCRIPTION("Allwinner sunxi AHCI SATA driver");
+MODULE_AUTHOR("Olliver Schinagl <oliver@schinagl.nl>");
+MODULE_LICENSE("GPL");
--
1.8.5.5

31
target/linux/sunxi/patches-3.13/162-1-ahci-plat-add-dt-compat.patch
View File

@ -1,31 +0,0 @@
From 90189e2c18e983da0ce22e44cd610f9ce2db69b1 Mon Sep 17 00:00:00 2001
From: Roger Quadros <rogerq@ti.com>
Date: Mon, 20 Jan 2014 16:32:33 +0200
Subject: [PATCH] ata: ahci_platform: Add DT compatible for Synopsis DWC AHCI
controller
Add compatible string "snps,dwc-ahci", which should be used
for Synopsis Designware SATA cores. e.g. on TI OMAP5 and DRA7 platforms.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/ata/ahci_platform.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index bdadec1..d7e55ba 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -609,6 +609,7 @@ static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
{ .compatible = "snps,spear-ahci", },
{ .compatible = "snps,exynos5440-ahci", },
{ .compatible = "ibm,476gtr-ahci", },
+ { .compatible = "snps,dwc-ahci", },
{},
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
--
1.8.5.5

142
target/linux/sunxi/patches-3.13/162-2-ahci-plat-manage-sata-phy.patch
View File

@ -1,142 +0,0 @@
From 154a670a945c54300749d5ba008f30bbd6089017 Mon Sep 17 00:00:00 2001
From: Roger Quadros <rogerq@ti.com>
Date: Mon, 27 Jan 2014 16:41:18 +0200
Subject: [PATCH] ata: ahci_platform: Manage SATA PHY
Some platforms have a PHY hooked up to the
SATA controller. The PHY needs to be initialized
and powered up for SATA to work. We do that
using the PHY framework.
CC: Balaji T K <balajitk@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/ata/ahci.h | 2 ++
drivers/ata/ahci_platform.c | 47 +++++++++++++++++++++++++++++++++++++++++++--
2 files changed, 47 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index bf8100c..3ab7ac9 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -37,6 +37,7 @@
#include <linux/clk.h>
#include <linux/libata.h>
+#include <linux/phy/phy.h>
#include <linux/regulator/consumer.h>
/* Enclosure Management Control */
@@ -325,6 +326,7 @@ struct ahci_host_priv {
u32 em_msg_type; /* EM message type */
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
struct regulator *target_pwr; /* Optional */
+ struct phy *phy; /* If platform uses phy */
void *plat_data; /* Other platform data */
/*
* Optional ahci_start_engine override, if not set this gets set to the
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index d7e55ba..99d38c1 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
+#include <linux/phy/phy.h>
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
@@ -147,6 +148,7 @@ void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
* the following order:
* 1) Regulator
* 2) Clocks (through ahci_platform_enable_clks)
+ * 3) Phy
*
* If resource enabling fails at any point the previous enabled
* resources are disabled in reverse order.
@@ -171,8 +173,23 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
if (rc)
goto disable_regulator;
+ if (hpriv->phy) {
+ rc = phy_init(hpriv->phy);
+ if (rc)
+ goto disable_clks;
+
+ rc = phy_power_on(hpriv->phy);
+ if (rc) {
+ phy_exit(hpriv->phy);
+ goto disable_clks;
+ }
+ }
+
return 0;
+disable_clks:
+ ahci_platform_disable_clks(hpriv);
+
disable_regulator:
if (hpriv->target_pwr)
regulator_disable(hpriv->target_pwr);
@@ -186,14 +203,20 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
*
* This function disables all ahci_platform managed resources in
* the following order:
- * 1) Clocks (through ahci_platform_disable_clks)
- * 2) Regulator
+ * 1) Phy
+ * 2) Clocks (through ahci_platform_disable_clks)
+ * 3) Regulator
*
* LOCKING:
* None.
*/
void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
{
+ if (hpriv->phy) {
+ phy_power_off(hpriv->phy);
+ phy_exit(hpriv->phy);
+ }
+
ahci_platform_disable_clks(hpriv);
if (hpriv->target_pwr)
@@ -222,6 +245,7 @@ static void ahci_platform_put_resources(struct device *dev, void *res)
* 2) regulator for controlling the targets power (optional)
* 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
* or for non devicetree enabled platforms a single clock
+ * 4) phy (optional)
*
* LOCKING:
* None.
@@ -283,6 +307,25 @@ struct ahci_host_priv *ahci_platform_get_resources(
hpriv->clks[i] = clk;
}
+ hpriv->phy = devm_phy_get(dev, "sata-phy");
+ if (IS_ERR(hpriv->phy)) {
+ rc = PTR_ERR(hpriv->phy);
+ switch (rc) {
+ case -ENODEV:
+ case -ENOSYS:
+ /* continue normally */
+ hpriv->phy = NULL;
+ break;
+
+ case -EPROBE_DEFER:
+ goto err_out;
+
+ default:
+ dev_err(dev, "couldn't get sata-phy\n");
+ goto err_out;
+ }
+ }
+
devres_remove_group(dev, NULL);
return hpriv;
--
1.8.5.5

85
target/linux/sunxi/patches-3.13/162-3-ahci-plat-runtime-resume.patch
View File

@ -1,85 +0,0 @@
From 48379fed3987d587a25a48e155872e9d3125490d Mon Sep 17 00:00:00 2001
From: Roger Quadros <rogerq@ti.com>
Date: Wed, 9 Oct 2013 15:08:59 +0300
Subject: [PATCH] ata: ahci_platform: runtime resume the device before use
On OMAP platforms the device needs to be runtime resumed before
it can be accessed. The OMAP HWMOD framework takes care of
enabling the module and its resources based on the
device's runtime PM state.
In this patch we runtime resume during .probe() and runtime suspend
after .remove().
We also update the runtime PM state during .resume().
CC: Balaji T K <balajitk@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/ata/ahci.h | 1 +
drivers/ata/ahci_platform.c | 15 +++++++++++++++
2 files changed, 16 insertions(+)
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 3ab7ac9..51af275b 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -324,6 +324,7 @@ struct ahci_host_priv {
u32 em_loc; /* enclosure management location */
u32 em_buf_sz; /* EM buffer size in byte */
u32 em_msg_type; /* EM message type */
+ bool got_runtime_pm; /* Did we do pm_runtime_get? */
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
struct regulator *target_pwr; /* Optional */
struct phy *phy; /* If platform uses phy */
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 99d38c1..75698a4 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -24,6 +24,7 @@
#include <linux/libata.h>
#include <linux/ahci_platform.h>
#include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
@@ -229,6 +230,11 @@ static void ahci_platform_put_resources(struct device *dev, void *res)
struct ahci_host_priv *hpriv = res;
int c;
+ if (hpriv->got_runtime_pm) {
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
+ }
+
for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
clk_put(hpriv->clks[c]);
}
@@ -326,6 +332,10 @@ struct ahci_host_priv *ahci_platform_get_resources(
}
}
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
+ hpriv->got_runtime_pm = true;
+
devres_remove_group(dev, NULL);
return hpriv;
@@ -635,6 +645,11 @@ int ahci_platform_resume(struct device *dev)
if (rc)
goto disable_resources;
+ /* We resumed so update PM runtime state */
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
return 0;
disable_resources:
--
1.8.5.5

47
target/linux/sunxi/patches-3.13/163-ahci_sunxi-use-mdelay.patch
View File

@ -1,47 +0,0 @@
From 09de09bc2c236dccb0ed5ed38015e829550a5c28 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sun, 23 Feb 2014 11:37:17 +0100
Subject: [PATCH] ahci_sunxi: Use msleep instead of mdelay
ahci_sunxi_phy_init is called from the probe and resume code paths, and
sleeping is safe in both, so use msleep instead of mdelay.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/ata/ahci_sunxi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c
index 001f7dfc..d1bf3f7 100644
--- a/drivers/ata/ahci_sunxi.c
+++ b/drivers/ata/ahci_sunxi.c
@@ -90,7 +90,7 @@ static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
/* This magic is from the original code */
writel(0, reg_base + AHCI_RWCR);
- mdelay(5);
+ msleep(5);
sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
@@ -105,7 +105,7 @@ static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
(0x7 << 20), (0x3 << 20));
sunxi_clrsetbits(reg_base + AHCI_PHYCS2R,
(0x1f << 5), (0x19 << 5));
- mdelay(5);
+ msleep(5);
sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
@@ -137,7 +137,7 @@ static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
udelay(1);
} while (1);
- mdelay(15);
+ msleep(15);
writel(0x7, reg_base + AHCI_RWCR);
--
1.8.5.5

122
target/linux/sunxi/patches-3.13/164-1-dt-sun4i-add-ahci.patch
View File

@ -1,122 +0,0 @@
From 3cae1df0e62432a80db86c80e261eb9bbed326ee Mon Sep 17 00:00:00 2001
From: Oliver Schinagl <oliver@schinagl.nl>
Date: Tue, 3 Dec 2013 12:10:11 +0100
Subject: [PATCH] ARM: sun4i: dt: Add ahci / sata support
This patch adds sunxi sata support to A10 boards that have such a connector.
Some boards also feature a regulator via a GPIO and support for this is also
added.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
arch/arm/boot/dts/sun4i-a10-a1000.dts | 4 ++++
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 6 +++++
arch/arm/boot/dts/sun4i-a10.dtsi | 8 +++++++
arch/arm/boot/dts/sunxi-ahci-reg.dtsi | 36 ++++++++++++++++++++++++++++++
4 files changed, 54 insertions(+)
create mode 100644 arch/arm/boot/dts/sunxi-ahci-reg.dtsi
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index cbd2e13..d6ec839 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -35,6 +35,10 @@
};
};
+ ahci: sata@01c18000 {
+ status = "okay";
+ };
+
pinctrl@01c20800 {
emac_power_pin_a1000: emac_power_pin@0 {
allwinner,pins = "PH15";
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index b139ee6..6df237d8 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -12,6 +12,7 @@
/dts-v1/;
/include/ "sun4i-a10.dtsi"
+/include/ "sunxi-ahci-reg.dtsi"
/ {
model = "Cubietech Cubieboard";
@@ -33,6 +34,11 @@
};
};
+ ahci: sata@01c18000 {
+ target-supply = <&reg_ahci_5v>;
+ status = "okay";
+ };
+
pinctrl@01c20800 {
led_pins_cubieboard: led_pins@0 {
allwinner,pins = "PH20", "PH21";
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 336dbec..454077a 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -338,6 +338,14 @@
#size-cells = <0>;
};
+ ahci: sata@01c18000 {
+ compatible = "allwinner,sun4i-a10-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <56>;
+ clocks = <&pll6 0>, <&ahb_gates 25>;
+ status = "disabled";
+ };
+
intc: interrupt-controller@01c20400 {
compatible = "allwinner,sun4i-ic";
reg = <0x01c20400 0x400>;
diff --git a/arch/arm/boot/dts/sunxi-ahci-reg.dtsi b/arch/arm/boot/dts/sunxi-ahci-reg.dtsi
new file mode 100644
index 0000000..7072af1
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-ahci-reg.dtsi
@@ -0,0 +1,36 @@
+/*
+ * sunxi boards sata target power supply common code
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ soc@01c00000 {
+ pio: pinctrl@01c20800 {
+ ahci_pwr_pin_a: ahci_pwr_pin@0 {
+ allwinner,pins = "PB8";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+ };
+
+ reg_ahci_5v: ahci-5v {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ahci_pwr_pin_a>;
+ regulator-name = "ahci-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pio 1 8 0>;
+ };
+};
--
1.8.5.5

128
target/linux/sunxi/patches-3.13/164-2-dt-sun7i-add-ahci.patch
View File

@ -1,128 +0,0 @@
From c7b99b7afc3882c1b38a15da8d1625dd448c6fee Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Fri, 3 Jan 2014 10:27:51 +0100
Subject: [PATCH] ARM: sun7i: dt: Add ahci / sata support
This patch adds sunxi sata support to A20 boards that have such a connector.
Some boards also feature a regulator via a GPIO and support for this is also
added.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 6 ++++++
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 18 ++++++++++++++++++
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 6 ++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
4 files changed, 38 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 7bf4935..07823c2 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -13,12 +13,18 @@
/dts-v1/;
/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-ahci-reg.dtsi"
/ {
model = "Cubietech Cubieboard2";
compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
soc@01c00000 {
+ ahci: sata@01c18000 {
+ target-supply = <&reg_ahci_5v>;
+ status = "okay";
+ };
+
pinctrl@01c20800 {
led_pins_cubieboard2: led_pins@0 {
allwinner,pins = "PH20", "PH21";
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 025ce52..403bd2e 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -13,13 +13,26 @@
/dts-v1/;
/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-ahci-reg.dtsi"
/ {
model = "Cubietech Cubietruck";
compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
soc@01c00000 {
+ ahci: sata@01c18000 {
+ target-supply = <&reg_ahci_5v>;
+ status = "okay";
+ };
+
pinctrl@01c20800 {
+ ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
+ allwinner,pins = "PH12";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
led_pins_cubietruck: led_pins@0 {
allwinner,pins = "PH7", "PH11", "PH20", "PH21";
allwinner,function = "gpio_out";
@@ -90,4 +103,10 @@
gpios = <&pio 7 7 0>;
};
};
+
+ reg_ahci_5v: ahci-5v {
+ pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
+ gpio = <&pio 7 12 0>;
+ status = "okay";
+ };
};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index b02a796..d5c6799 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -13,12 +13,18 @@
/dts-v1/;
/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-ahci-reg.dtsi"
/ {
model = "Olimex A20-Olinuxino Micro";
compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
soc@01c00000 {
+ ahci: sata@01c18000 {
+ target-supply = <&reg_ahci_5v>;
+ status = "okay";
+ };
+
pinctrl@01c20800 {
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PH2";
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index daaafd0..3385994 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -392,6 +392,14 @@
#size-cells = <0>;
};
+ ahci: sata@01c18000 {
+ compatible = "allwinner,sun4i-a10-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <0 56 4>;
+ clocks = <&pll6 0>, <&ahb_gates 25>;
+ status = "disabled";
+ };
+
pio: pinctrl@01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
--
1.8.5.5

1187
target/linux/sunxi/patches-3.13/170-1-mmc-add-driver.patch
View File

File diff suppressed because it is too large Load Diff

56
target/linux/sunxi/patches-3.13/170-2-mmc-simplify-clkdelay.patch
View File

@ -1,56 +0,0 @@
From 40889884d53094fe9987a45f9df99fdf1f311910 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sun, 16 Feb 2014 10:47:51 +0100
Subject: [PATCH] sunxi-mmc: Simplify clk delay setting
clk_sunxi_mmc_phase_control() does its own locking, so there is no need to
lock at the host. Without the locking having a separate sunxi_mmc_set_clk_dly()
makes no sense, so simply call clk_sunxi_mmc_phase_control() directly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/mmc/host/sunxi-mmc.c | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index f33bc30..f4bfaf0 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -420,17 +420,6 @@ static void sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en)
}
}
-static void sunxi_mmc_set_clk_dly(struct sunxi_mmc_host *smc_host,
- u32 oclk_dly, u32 sclk_dly)
-{
- unsigned long iflags;
- struct clk_hw *hw = __clk_get_hw(smc_host->clk_mod);
-
- spin_lock_irqsave(&smc_host->lock, iflags);
- clk_sunxi_mmc_phase_control(hw, sclk_dly, oclk_dly);
- spin_unlock_irqrestore(&smc_host->lock, iflags);
-}
-
struct sunxi_mmc_clk_dly mmc_clk_dly[MMC_CLK_MOD_NUM] = {
{ MMC_CLK_400K, 0, 7 },
{ MMC_CLK_25M, 0, 5 },
@@ -450,6 +439,7 @@ static void sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *smc_host,
u32 sclk_dly;
u32 temp;
struct sunxi_mmc_clk_dly *dly = NULL;
+ struct clk_hw *hw = __clk_get_hw(smc_host->clk_mod);
newrate = clk_round_rate(smc_host->clk_mod, rate);
if (smc_host->clk_mod_rate == newrate) {
@@ -508,7 +498,7 @@ static void sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *smc_host,
sclk_dly--;
}
- sunxi_mmc_set_clk_dly(smc_host, oclk_dly, sclk_dly);
+ clk_sunxi_mmc_phase_control(hw, sclk_dly, oclk_dly);
sunxi_mmc_oclk_onoff(smc_host, 1);
/* oclk_onoff sets various irq status bits, clear these */
--
1.8.5.5

49
target/linux/sunxi/patches-3.13/170-3-mmc-dont-set-mmc_clk-in-lowpower.patch
View File

@ -1,49 +0,0 @@
From 0a6ec6db90c73b037428bf3a94a6281754007c25 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 17 Feb 2014 16:55:54 +0100
Subject: [PATCH] sunxi-mmc: Don't set mmc clk in low power mode
The android driver uses an io-flag to descern whether a controller is
hooked up to a sdcard slot, or to an onboard sdio dev. And for sdcard slots
it sets the clock in a low-power mode.
This is causing transmission errors when talking to the sdio-wifi on the
cubietruck, and this may be the cause of problems with some type sdcards
too. This patch fixes things by simply never setting the clk in low power
mode.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/mmc/host/sunxi-mmc.c | 3 ---
drivers/mmc/host/sunxi-mmc.h | 1 -
2 files changed, 4 deletions(-)
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index f4bfaf0..c1a9d8a 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -400,9 +400,6 @@ static void sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en)
if (oclk_en)
rval |= SDXC_CARD_CLOCK_ON;
- if (!host->io_flag)
- rval |= SDXC_LOW_POWER_ON;
-
mci_writel(host, REG_CLKCR, rval);
rval = SDXC_START | SDXC_UPCLK_ONLY | SDXC_WAIT_PRE_OVER;
diff --git a/drivers/mmc/host/sunxi-mmc.h b/drivers/mmc/host/sunxi-mmc.h
index cbd6d49..a738850 100644
--- a/drivers/mmc/host/sunxi-mmc.h
+++ b/drivers/mmc/host/sunxi-mmc.h
@@ -211,7 +211,6 @@ struct sunxi_mmc_host {
/* flags */
u32 power_on:1;
- u32 io_flag:1;
u32 wait_dma:1;
dma_addr_t sg_dma;
--
1.8.5.5

32
target/linux/sunxi/patches-3.13/170-4-mmc-stop-claiming-UHS.patch
View File

@ -1,32 +0,0 @@
From 3ec947a9717509e204c7f09609717951beb7ef04 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 17 Feb 2014 17:11:58 +0100
Subject: [PATCH] sunxi-mmc: Stop claiming UHS modes
UHS requires a regulator to set the signaling voltage, as well as special
code to handle the signal voltage switching. We've never added the code
for this from the android driver to the upstream driver, so stop claiming
support for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/mmc/host/sunxi-mmc.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index c1a9d8a..2eaed10 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -803,8 +803,7 @@ static int sunxi_mmc_probe(struct platform_device *pdev)
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR50 |
- MMC_CAP_UHS_DDR50 | MMC_CAP_SDIO_IRQ | MMC_CAP_DRIVER_TYPE_A;
+ MMC_CAP_SDIO_IRQ;
mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP;
ret = mmc_add_host(mmc);
--
1.8.5.5

34
target/linux/sunxi/patches-3.13/170-5-mmc-fix-caps-override.patch
View File

@ -1,34 +0,0 @@
From dffb4d4d1fe3a6ba93102756152ec4518dbeac00 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 17 Feb 2014 17:13:19 +0100
Subject: [PATCH] sunxi-mmc: Or in caps, rather then overriding them
Now that we use mmc_of_parse() there are already some caps set by mmc_of_parse,
so or in our driver caps, rather then using an assignment. This fixes the
card running only in 1 bit mode instead of 4 bit mode problem we've had
since we switched to using mmc_of_parse().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/mmc/host/sunxi-mmc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index 2eaed10..d5e8ff9 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -802,9 +802,9 @@ static int sunxi_mmc_probe(struct platform_device *pdev)
else
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+ mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_SDIO_IRQ;
- mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP;
+ mmc->caps2 |= MMC_CAP2_NO_PRESCAN_POWERUP;
ret = mmc_add_host(mmc);
--
1.8.5.5

45
target/linux/sunxi/patches-3.13/170-6-mmc-dont-call-mmc_of_parser-until-ready.patch
View File

@ -1,45 +0,0 @@
From 73797537f3904fec60a647b3b209bf7add092ad5 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 17 Feb 2014 21:59:08 +0100
Subject: [PATCH] sunxi-mmc: Don't call mmc_of_parse until we're ready to
mmc_of_parse registers an irq handler for the gpio pins for cd, this irq
handler will reference host->ops, so don't call mmc_of_parse until we're
done setting everything up.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/mmc/host/sunxi-mmc.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index d5e8ff9..cceae68 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -766,10 +766,6 @@ static int sunxi_mmc_probe(struct platform_device *pdev)
return -ENOMEM;
}
- ret = mmc_of_parse(mmc);
- if (ret)
- goto error_free_host;
-
host = mmc_priv(mmc);
host->mmc = mmc;
spin_lock_init(&host->lock);
@@ -806,8 +802,11 @@ static int sunxi_mmc_probe(struct platform_device *pdev)
MMC_CAP_SDIO_IRQ;
mmc->caps2 |= MMC_CAP2_NO_PRESCAN_POWERUP;
- ret = mmc_add_host(mmc);
+ ret = mmc_of_parse(mmc);
+ if (ret)
+ goto error_free_dma;
+ ret = mmc_add_host(mmc);
if (ret)
goto error_free_dma;
--
1.8.5.5

42
target/linux/sunxi/patches-3.13/170-7-clk-export-mmc-phasectrl.patch
View File

@ -1,42 +0,0 @@
From 7bd0d82ef525e8949425fe271fb86eacf3822821 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sun, 15 Dec 2013 19:44:01 +0100
Subject: [PATCH] ARM: sunxi: clk: export clk_sunxi_mmc_phase_control
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
include/linux/clk/sunxi.h | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 include/linux/clk/sunxi.h
diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h
new file mode 100644
index 0000000..1ef5c89
--- /dev/null
+++ b/include/linux/clk/sunxi.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2013 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_CLK_SUNXI_H_
+#define __LINUX_CLK_SUNXI_H_
+
+#include <linux/clk.h>
+
+void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output);
+
+#endif
--
1.8.5.5

62
target/linux/sunxi/patches-3.13/170-8-clk-sunxi-implement-mmc-phasectrl.patch
View File

@ -1,62 +0,0 @@
From fcba369ee1af8657353bb1e37807aa492c462263 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Fri, 20 Sep 2013 20:29:17 -0300
Subject: [PATCH] clk: sunxi: Implement MMC phase control
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Emilio López <emilio@elopez.com.ar>
---
drivers/clk/sunxi/clk-sunxi.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 3283179..46a38b4 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -500,6 +500,41 @@ static void __init sun7i_a20_gmac_clk_setup(struct device_node *node)
/**
+ * clk_sunxi_mmc_phase_control() - configures MMC clock phase control
+ */
+
+void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output)
+{
+ #define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw)
+ #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
+
+ struct clk_composite *composite = to_clk_composite(hw);
+ struct clk_hw *rate_hw = composite->rate_hw;
+ struct clk_factors *factors = to_clk_factors(rate_hw);
+ unsigned long flags = 0;
+ u32 reg;
+
+ if (factors->lock)
+ spin_lock_irqsave(factors->lock, flags);
+
+ reg = readl(factors->reg);
+
+ /* set sample clock phase control */
+ reg &= ~(0x7 << 20);
+ reg |= ((sample & 0x7) << 20);
+
+ /* set output clock phase control */
+ reg &= ~(0x7 << 8);
+ reg |= ((output & 0x7) << 8);
+
+ writel(reg, factors->reg);
+
+ if (factors->lock)
+ spin_unlock_irqrestore(factors->lock, flags);
+}
+
+
+/**
* sunxi_factors_clk_setup() - Setup function for factor clocks
*/
--
1.8.5.5

44
target/linux/sunxi/patches-3.13/170-9-mmc-fixup-revert-sdio.patch
View File

@ -1,44 +0,0 @@
From 0483aa124d32bdcafc84623a31141a49e71cc72d Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sun, 16 Feb 2014 08:54:20 +0100
Subject: [PATCH] sunxi-mmc: fixup: revert "add host initialization for when
the sdio irq is enabled"
This is not necessary since when the host is not initialized at this point
yet the irq line from the mmc controller is not enabled, so writing the
host controller interrupt mask cannot cause interrupts at this point.
More over doing this is wrong, as it leads to unbalanced calling of
clk_prepare_enable and regulator_power_on.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/mmc/host/sunxi-mmc.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index 2dc446c..f33bc30 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -593,18 +593,9 @@ static void sunxi_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
{
struct sunxi_mmc_host *smc_host = mmc_priv(mmc);
unsigned long flags;
- int ret;
u32 imask;
spin_lock_irqsave(&smc_host->lock, flags);
-
- /* Make sure the controller is in a sane state before enabling irqs */
- ret = sunxi_mmc_init_host(host->mmc);
- if (ret) {
- spin_unlock_irqrestore(&smc_host->lock, flags);
- return ret;
- }
-
imask = mci_readl(smc_host, REG_IMASK);
if (enable) {
smc_host->sdio_imask = SDXC_SDIO_INTERRUPT;
--
1.8.5.5

56
target/linux/sunxi/patches-3.13/171-1-pinctrl-sunxi-fix-port-F-multiplexing.patch
View File

@ -1,56 +0,0 @@
From 85f17a0d652853455ac633fc965cea8431038518 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sat, 14 Dec 2013 17:20:13 +0100
Subject: [PATCH] pinctrl-sunxi: Fix sun5i-a13 port F multiplexing
The correct value for selecting the mmc0 function on port F pins is 2 not 4,
as per the data-sheet:
http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/pinctrl/pinctrl-sunxi-pins.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-sunxi-pins.h b/drivers/pinctrl/pinctrl-sunxi-pins.h
index 6fd8d4d..3d60669 100644
--- a/drivers/pinctrl/pinctrl-sunxi-pins.h
+++ b/drivers/pinctrl/pinctrl-sunxi-pins.h
@@ -1932,27 +1932,27 @@
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* D1 */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* D1 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* D0 */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* D0 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* CLK */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* CLK */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* CMD */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* CMD */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* D3 */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* D3 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* D2 */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* D2 */
/* Hole */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0,
SUNXI_FUNCTION(0x0, "gpio_in"),
--
1.8.5.5

26
target/linux/sunxi/patches-3.13/171-3-pinctrl-sunxi-fix-masking-with-irqtype.patch
View File

@ -1,26 +0,0 @@
From 9d506cbf0e7b0e017d78f244e2b4c0fc71206c6c Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sat, 15 Feb 2014 12:56:42 +0100
Subject: [PATCH] pinctrl-sunxi: Fix masking when setting irq type
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/pinctrl/pinctrl-sunxi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c
index cc9bd1b..917af0a 100644
--- a/drivers/pinctrl/pinctrl-sunxi.c
+++ b/drivers/pinctrl/pinctrl-sunxi.c
@@ -583,7 +583,7 @@ static int sunxi_pinctrl_irq_set_type(struct irq_data *d,
spin_lock_irqsave(&pctl->lock, flags);
regval = readl(pctl->membase + reg);
- regval &= ~IRQ_CFG_IRQ_MASK;
+ regval &= ~(IRQ_CFG_IRQ_MASK << index);
writel(regval | (mode << index), pctl->membase + reg);
spin_unlock_irqrestore(&pctl->lock, flags);
--
1.8.5.5

46
target/linux/sunxi/patches-3.13/171-4-pinctrl-sunxi-fix-irqregister-offset-calcs.patch
View File

@ -1,46 +0,0 @@
From a5f3d2672d5b9efe93be0bf66d69156bf806220b Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 17 Feb 2014 22:04:20 +0100
Subject: [PATCH] pinctrl-sunxi: Fix interrupt register offset calculation
This fixing setting the interrupt type for eints >= 8.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/pinctrl/pinctrl-sunxi.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-sunxi.h b/drivers/pinctrl/pinctrl-sunxi.h
index 01c494f..552b0e9 100644
--- a/drivers/pinctrl/pinctrl-sunxi.h
+++ b/drivers/pinctrl/pinctrl-sunxi.h
@@ -511,7 +511,7 @@ static inline u32 sunxi_pull_offset(u16 pin)
static inline u32 sunxi_irq_cfg_reg(u16 irq)
{
- u8 reg = irq / IRQ_CFG_IRQ_PER_REG;
+ u8 reg = irq / IRQ_CFG_IRQ_PER_REG * 0x04;
return reg + IRQ_CFG_REG;
}
@@ -523,7 +523,7 @@ static inline u32 sunxi_irq_cfg_offset(u16 irq)
static inline u32 sunxi_irq_ctrl_reg(u16 irq)
{
- u8 reg = irq / IRQ_CTRL_IRQ_PER_REG;
+ u8 reg = irq / IRQ_CTRL_IRQ_PER_REG * 0x04;
return reg + IRQ_CTRL_REG;
}
@@ -535,7 +535,7 @@ static inline u32 sunxi_irq_ctrl_offset(u16 irq)
static inline u32 sunxi_irq_status_reg(u16 irq)
{
- u8 reg = irq / IRQ_STATUS_IRQ_PER_REG;
+ u8 reg = irq / IRQ_STATUS_IRQ_PER_REG * 0x04;
return reg + IRQ_STATUS_REG;
}
--
1.8.5.5

133
target/linux/sunxi/patches-3.13/173-1-dt-sun4i-add-mmc.patch
View File

@ -1,133 +0,0 @@
From 6c6bc98f6a2b1f91071564efdb77c90307610018 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20Lanzend=C3=B6rfer?= <david.lanzendoerfer@o2s.ch>
Date: Sat, 15 Feb 2014 14:02:51 +0100
Subject: [PATCH] ARM: dts: sun4i: Add support for mmc
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
arch/arm/boot/dts/sun4i-a10-a1000.dts | 8 +++++
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 8 +++++
arch/arm/boot/dts/sun4i-a10.dtsi | 54 ++++++++++++++++++++++++++++++
3 files changed, 70 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index d6ec839..4b2a694 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -35,6 +35,14 @@
};
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ status = "okay";
+ };
+
ahci: sata@01c18000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 6df237d8..ef85b8e 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -34,6 +34,14 @@
};
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ status = "okay";
+ };
+
ahci: sata@01c18000 {
target-supply = <&reg_ahci_5v>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 454077a..a8e0df3 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -338,6 +338,50 @@
#size-cells = <0>;
};
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun4i-a10-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <32>;
+ bus-width = <4>;
+ status = "disabled";
+ cd-inverted;
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun4i-a10-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <33>;
+ bus-width = <4>;
+ status = "disabled";
+ cd-inverted;
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun4i-a10-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <34>;
+ bus-width = <4>;
+ status = "disabled";
+ cd-inverted;
+ };
+
+ mmc3: mmc@01c12000 {
+ compatible = "allwinner,sun4i-a10-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ahb_gates 11>, <&mmc3_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <35>;
+ bus-width = <4>;
+ status = "disabled";
+ cd-inverted;
+ };
+
ahci: sata@01c18000 {
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
@@ -416,6 +456,20 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
+
+ mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
+ allwinner,pins = "PH1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
};
timer@01c20c00 {
--
1.8.5.5

234
target/linux/sunxi/patches-3.13/173-2-dt-sun5i-add-mmc.patch
View File

@ -1,234 +0,0 @@
From 5bfbb46a8685de4c67f084aea983fc9a50c882ad Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20Lanzend=C3=B6rfer?= <david.lanzendoerfer@o2s.ch>
Date: Sat, 15 Feb 2014 14:02:29 +0100
Subject: [PATCH] ARM: dts: sun5i: Add support for mmc
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 30 ++++++++++++++++
arch/arm/boot/dts/sun5i-a10s.dtsi | 44 ++++++++++++++++++++++++
arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 15 ++++++++
arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 15 ++++++++
arch/arm/boot/dts/sun5i-a13.dtsi | 37 ++++++++++++++++++++
5 files changed, 141 insertions(+)
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 3c9f8b3..5c7b454 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -34,7 +34,37 @@
};
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_olinuxino_micro>;
+ cd-gpios = <&pio 6 1 0>; /* PG1 */
+ status = "okay";
+ };
+
+ mmc1: mmc@01c10000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc1_pins_a>;
+ pinctrl-1 = <&mmc1_cd_pin_olinuxino_micro>;
+ cd-gpios = <&pio 6 13 0>; /* PG13 */
+ status = "okay";
+ };
+
pinctrl@01c20800 {
+ mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
+ mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
+ allwinner,pins = "PG13";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PE3";
allwinner,function = "gpio_out";
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 3a9b33d..3a7039e 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -299,6 +299,36 @@
#size-cells = <0>;
};
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <32>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <33>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <34>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
intc: interrupt-controller@01c20400 {
compatible = "allwinner,sun4i-ic";
reg = <0x01c20400 0x400>;
@@ -369,6 +399,20 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
+
+ mmc1_pins_a: mmc1@0 {
+ allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
+ allwinner,function = "mmc1";
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
index fe2ce0a..2f08bb2 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -20,7 +20,22 @@
compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_olinuxinom>;
+ cd-gpios = <&pio 6 0 0>; /* PG0 */
+ status = "okay";
+ };
+
pinctrl@01c20800 {
+ mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
led_pins_olinuxinom: led_pins@0 {
allwinner,pins = "PG9";
allwinner,function = "gpio_out";
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index a4ba5ff..a7280f5 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -19,7 +19,22 @@
compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_olinuxino>;
+ cd-gpios = <&pio 6 0 0>; /* PG0 */
+ status = "okay";
+ };
+
pinctrl@01c20800 {
+ mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PG9";
allwinner,function = "gpio_out";
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 9612c52..63a35b8 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -281,6 +281,36 @@
#size-cells = <1>;
ranges;
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <32>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <33>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <34>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
intc: interrupt-controller@01c20400 {
compatible = "allwinner,sun4i-ic";
reg = <0x01c20400 0x400>;
@@ -333,6 +363,13 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
--
1.8.5.5

179
target/linux/sunxi/patches-3.13/173-3-dt-sun7i-add-mmc.patch
View File

@ -1,179 +0,0 @@
From a3bddfdd19c49f0bde7aa2ff496773c575763d07 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20Lanzend=C3=B6rfer?= <david.lanzendoerfer@o2s.ch>
Date: Sat, 15 Feb 2014 14:02:01 +0100
Subject: [PATCH] ARM: dts: sun7i: Add support for mmc
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 8 ++++
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 8 ++++
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 23 ++++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 61 +++++++++++++++++++++++++
4 files changed, 100 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 07823c2..a8186f5 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -20,6 +20,14 @@
compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ status = "okay";
+ };
+
ahci: sata@01c18000 {
target-supply = <&reg_ahci_5v>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 403bd2e..6cd7cca 100644
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index d5c6799..d4e2355 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -20,12 +20,35 @@
compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ status = "okay";
+ };
+
+ mmc3: mmc@01c12000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ pinctrl-1 = <&mmc3_cd_pin_olinuxinom>;
+ cd-gpios = <&pio 7 11 0>; /* PH11 */
+ status = "okay";
+ };
+
ahci: sata@01c18000 {
target-supply = <&reg_ahci_5v>;
status = "okay";
};
pinctrl@01c20800 {
+ mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
+ allwinner,pins = "PH11";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index cb25d3c..66bb3ef 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -20,6 +20,14 @@
compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ status = "okay";
+ };
+
ahci: sata@01c18000 {
target-supply = <&reg_ahci_5v>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 3385994..3bc6ac5 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -392,6 +392,46 @@
#size-cells = <0>;
};
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 32 4>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 33 4>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 34 4>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ mmc3: mmc@01c12000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ahb_gates 11>, <&mmc3_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 35 4>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
ahci: sata@01c18000 {
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
@@ -510,6 +550,27 @@
allwinner,drive = <3>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
+
+ mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
+ allwinner,pins = "PH1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
+ mmc3_pins_a: mmc3@0 {
+ allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
+ allwinner,function = "mmc3";
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
--
1.8.5.5

107
target/linux/sunxi/patches-3.13/173-5-dt-sun5i-fixup-mmc.patch
View File

@ -1,107 +0,0 @@
From 1fa41bc5a6659e453ca19086f195b02a23dc3bbe Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 17 Feb 2014 17:25:54 +0100
Subject: [PATCH] ARM: sun5i: dt: Fixup mmc bindings
1) Now that we're no longer overriding the caps set by mmc_of_parse we need
to set cd-inverted for our card detection to work.
2) Now that we no longer claim UHS modes support we will never use any DDR
modes, so drive-strength 2 is enough for the mmc data pins.
3) mmc1 on the A13 is not routed to any pins, and thus unusable, remove it
from the dtsi
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
arch/arm/boot/dts/sun5i-a10s.dtsi | 7 +++++--
arch/arm/boot/dts/sun5i-a13.dtsi | 14 +++-----------
2 files changed, 8 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 3a7039e..15dfa9a 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -306,6 +306,7 @@
clock-names = "ahb", "mod";
interrupts = <32>;
bus-width = <4>;
+ cd-inverted;
status = "disabled";
};
@@ -316,6 +317,7 @@
clock-names = "ahb", "mod";
interrupts = <33>;
bus-width = <4>;
+ cd-inverted;
status = "disabled";
};
@@ -326,6 +328,7 @@
clock-names = "ahb", "mod";
interrupts = <34>;
bus-width = <4>;
+ cd-inverted;
status = "disabled";
};
@@ -403,14 +406,14 @@
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,function = "mmc0";
- allwinner,drive = <3>;
+ allwinner,drive = <2>;
allwinner,pull = <0>;
};
mmc1_pins_a: mmc1@0 {
allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
allwinner,function = "mmc1";
- allwinner,drive = <3>;
+ allwinner,drive = <2>;
allwinner,pull = <0>;
};
};
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 63a35b8..14a99d0 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -288,16 +288,7 @@
clock-names = "ahb", "mod";
interrupts = <32>;
bus-width = <4>;
- status = "disabled";
- };
-
- mmc1: mmc@01c10000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c10000 0x1000>;
- clocks = <&ahb_gates 9>, <&mmc1_clk>;
- clock-names = "ahb", "mod";
- interrupts = <33>;
- bus-width = <4>;
+ cd-inverted;
status = "disabled";
};
@@ -308,6 +299,7 @@
clock-names = "ahb", "mod";
interrupts = <34>;
bus-width = <4>;
+ cd-inverted;
status = "disabled";
};
@@ -367,7 +359,7 @@
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,function = "mmc0";
- allwinner,drive = <3>;
+ allwinner,drive = <2>;
allwinner,pull = <0>;
};
};
--
1.8.5.5

Some files were not shown because too many files have changed in this diff Show More