kernel: update linux 3.3 to 3.3.4

SVN-Revision: 31541
lede-17.01
Gabor Juhos 2012-04-30 08:38:11 +00:00
parent f8868fc87b
commit cbfce53831
24 changed files with 25 additions and 100 deletions

View File

@ -38,8 +38,8 @@ endif
ifeq ($(LINUX_VERSION),3.2.16)
LINUX_KERNEL_MD5SUM:=246e6bd28ea44c90ec66c7f8b56e4803
endif
ifeq ($(LINUX_VERSION),3.3.3)
LINUX_KERNEL_MD5SUM:=a6897310b4785b5f912c567cdc93402e
ifeq ($(LINUX_VERSION),3.3.4)
LINUX_KERNEL_MD5SUM:=113baeccd2a3341ecc62ae5e73c2ed1d
endif
# disable the md5sum check for unknown kernel versions

View File

@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
BOARD:=adm5120
BOARDNAME:=Infineon/ADMtek ADM5120
LINUX_VERSION:=3.3.3
LINUX_VERSION:=3.3.4
SUBTARGETS:=router_le router_be rb1xx
INITRAMFS_EXTRA_FILES:=

View File

@ -12,7 +12,7 @@ BOARDNAME:=Infineon WildPass ADM8668
FEATURES:=squashfs
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
LINUX_VERSION:=3.3.3
LINUX_VERSION:=3.3.4
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += wpad-mini kmod-rt61-pci

View File

@ -13,7 +13,7 @@ FEATURES:=squashfs jffs2 targz
CFLAGS:=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves
SUBTARGETS:=generic nand
LINUX_VERSION:=3.3.3
LINUX_VERSION:=3.3.4
include $(INCLUDE_DIR)/target.mk

View File

@ -14,7 +14,7 @@ FEATURES:=squashfs jffs2 targz ext2 usb
CFLAGS:=-Os -pipe -march=armv5te -mtune=arm926ej-s -fno-caller-saves
SUBTARGETS:=9g20 9260 9263
LINUX_VERSION:=3.3.3
LINUX_VERSION:=3.3.4
DEVICE_TYPE=
include $(INCLUDE_DIR)/target.mk

View File

@ -12,7 +12,7 @@ BOARDNAME:=Atmel AVR32
FEATURES:=squashfs
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
LINUX_VERSION:=3.3.3
LINUX_VERSION:=3.3.4
include $(INCLUDE_DIR)/target.mk

View File

@ -10,7 +10,7 @@ ARCH:=mips
BOARD:=brcm63xx
BOARDNAME:=Broadcom BCM63xx
FEATURES:=squashfs jffs2 usb atm pci pcmcia
LINUX_VERSION:=3.3.3
LINUX_VERSION:=3.3.4
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
include $(INCLUDE_DIR)/target.mk

View File

@ -226,7 +226,7 @@ Subject: [PATCH 25/63] ehci: add driver for bcm63xx integrated controller.
+MODULE_ALIAS("platform:bcm63xx_ehci");
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1376,6 +1376,11 @@ MODULE_LICENSE ("GPL");
@@ -1381,6 +1381,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_mv_driver
#endif

View File

@ -2,7 +2,7 @@
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -17,6 +17,9 @@
#include <linux/ssb/ssb.h>
#include <linux/gpio_buttons.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>

View File

@ -110,4 +110,4 @@
+ struct gpio_led leds[14];
/* Buttons */
struct gpio_button buttons[4];
struct gpio_keys_button buttons[4];

View File

@ -2,7 +2,7 @@
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -17,6 +17,7 @@
#include <linux/ssb/ssb.h>
#include <linux/gpio_buttons.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
+#include <linux/export.h>
#include <linux/spi/spi.h>

View File

@ -12,7 +12,7 @@ BOARDNAME:=Cavium Networks Econa CNS21xx
FEATURES:=squashfs broken
CFLAGS:=-Os -pipe -march=armv4 -mtune=fa526 -fno-caller-saves
LINUX_VERSION:=3.3.3
LINUX_VERSION:=3.3.4
include $(INCLUDE_DIR)/target.mk

View File

@ -3166,7 +3166,7 @@
+module_exit(ovl_exit);
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1299,6 +1299,7 @@ long do_splice_direct(struct file *in, l
@@ -1302,6 +1302,7 @@ long do_splice_direct(struct file *in, l
return ret;
}

View File

@ -1,75 +0,0 @@
commit 9a5d2bd99e0dfe9a31b3c160073ac445ba3d773f
Author: David Woodhouse <dwmw2@infradead.org>
Date: Sun Apr 8 10:01:44 2012 +0000
ppp: Fix race condition with queue start/stop
Commit e675f0cc9a872fd152edc0c77acfed19bf28b81e ("ppp: Don't stop and
restart queue on every TX packet") introduced a race condition which
could leave the net queue stopped even when the channel is no longer
busy. By calling netif_stop_queue() from ppp_start_xmit(), based on the
return value from ppp_xmit_process() but *after* all the locks have been
dropped, we could potentially do so *after* the channel has actually
finished transmitting and attempted to re-wake the queue.
Fix this by moving the netif_stop_queue() into ppp_xmit_process() under
the xmit lock. I hadn't done this previously, because it gets called
from other places than ppp_start_xmit(). But I now think it's the better
option. The net queue *should* be stopped if the channel becomes
congested due to writes from pppd, anyway.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit e675f0cc9a872fd152edc0c77acfed19bf28b81e
Author: David Woodhouse <dwmw2@infradead.org>
Date: Mon Mar 26 00:03:42 2012 +0000
ppp: Don't stop and restart queue on every TX packet
For every transmitted packet, ppp_start_xmit() will stop the netdev
queue and then, if appropriate, restart it. This causes the TX softirq
to run, entirely gratuitously.
This is "only" a waste of CPU time in the normal case, but it's actively
harmful when the PPP device is a TEQL slave — the wakeup will cause the
offending device to receive the next TX packet from the TEQL queue, when
it *should* have gone to the next slave in the list. We end up seeing
large bursts of packets on just *one* slave device, rather than using
the full available bandwidth over all slaves.
This patch fixes the problem by *not* unconditionally stopping the queue
in ppp_start_xmit(). It adds a return value from ppp_xmit_process()
which indicates whether the queue should be stopped or not.
It *doesn't* remove the call to netif_wake_queue() from
ppp_xmit_process(), because other code paths (especially from
ppp_output_wakeup()) need it there and it's messy to push it out to the
other callers to do it based on the return value. So we leave it in
place — it's a no-op in the case where the queue wasn't stopped, so it's
harmless in the TX path.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -968,7 +968,6 @@ ppp_start_xmit(struct sk_buff *skb, stru
proto = npindex_to_proto[npi];
put_unaligned_be16(proto, pp);
- netif_stop_queue(dev);
skb_queue_tail(&ppp->file.xq, skb);
ppp_xmit_process(ppp);
return NETDEV_TX_OK;
@@ -1063,6 +1062,8 @@ ppp_xmit_process(struct ppp *ppp)
code that we can accept some more. */
if (!ppp->xmit_pending && !skb_peek(&ppp->file.xq))
netif_wake_queue(ppp->dev);
+ else
+ netif_stop_queue(ppp->dev);
}
ppp_xmit_unlock(ppp);
}

View File

@ -1,6 +1,6 @@
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -139,6 +139,7 @@ struct net_bridge_port
@@ -135,6 +135,7 @@ struct net_bridge_port
unsigned long flags;
#define BR_HAIRPIN_MODE 0x00000001

View File

@ -58,7 +58,7 @@
default:
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -827,7 +827,7 @@ static void __br_multicast_send_query(st
@@ -753,7 +753,7 @@ static void __br_multicast_send_query(st
if (port) {
__skb_push(skb, sizeof(struct ethhdr));
skb->dev = port->dev;
@ -87,7 +87,7 @@
if (vlan_tx_tag_present(skb))
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -490,15 +490,29 @@ static inline bool br_multicast_is_route
@@ -486,15 +486,29 @@ static inline bool br_multicast_is_route
/* br_netfilter.c */
#ifdef CONFIG_BRIDGE_NETFILTER

View File

@ -69,7 +69,7 @@ Subject: [PATCH 44/70] MIPS: lantiq: adds dwc_otg
obj-$(CONFIG_USB_WDM) += class/
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2938,11 +2938,11 @@ hub_port_init (struct usb_hub *hub, stru
@@ -2935,11 +2935,11 @@ hub_port_init (struct usb_hub *hub, stru
udev->ttport = hdev->ttport;
} else if (udev->speed != USB_SPEED_HIGH
&& hdev->speed == USB_SPEED_HIGH) {

View File

@ -13,7 +13,7 @@ SUBTARGETS:=le be
INITRAMFS_EXTRA_FILES:=
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
LINUX_VERSION:=3.3.3
LINUX_VERSION:=3.3.4
include $(INCLUDE_DIR)/target.mk

View File

@ -12,7 +12,7 @@ BOARDNAME:=Freescale MPC52xx
CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=603e
FEATURES:=targz ext4
LINUX_VERSION:=3.3.3
LINUX_VERSION:=3.3.4
include $(INCLUDE_DIR)/target.mk

View File

@ -13,7 +13,7 @@ FEATURES:=squashfs
CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=405
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
LINUX_VERSION:=3.3.3
LINUX_VERSION:=3.3.4
include $(INCLUDE_DIR)/target.mk

View File

@ -13,7 +13,7 @@ SUBTARGETS:=rt288x rt305x rt3883
CFLAGS:=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves
FEATURES:=squashfs
LINUX_VERSION:=3.3.3
LINUX_VERSION:=3.3.4
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES+=\

View File

@ -18,7 +18,7 @@
depends on USB
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1376,6 +1376,11 @@ MODULE_LICENSE ("GPL");
@@ -1381,6 +1381,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_mv_driver
#endif

View File

@ -23,7 +23,7 @@ BOARDNAME:=User Mode Linux
FEATURES:=ext4 audio
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
LINUX_VERSION:=3.3.3
LINUX_VERSION:=3.3.4
include $(INCLUDE_DIR)/target.mk

View File

@ -1,4 +1,4 @@
LINUX_VERSION:=3.3.3
LINUX_VERSION:=3.3.4
BOARDNAME:=Traverse Geos
FEATURES:=squashfs jffs2 ext4 pci usb gpio
DEFAULT_PACKAGES += \