hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

uboot-sunxi: dts: Update orange Pi R1 integration 

This syncs the Orange Pi R1 device tree files with the one from the
upstream kernel and also uses the default configuration from the Orange
Pi Zero.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
openwrt-18.06
Hauke Mehrtens 2018-01-02 00:37:26 +01:00
parent 7a6de6d77a
commit c971b4eeea
2 changed files with 76 additions and 149 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

48
package/boot/uboot-sunxi/patches/301-sunxi-add-orangepi-R1-defconfig.patch
View File

@ -1,48 +0,0 @@
From 231201c71b902b5999ed9b143f2a54674cfae88a Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Tue, 26 Sep 2017 22:17:33 +0200
Subject: sunxi: add orangepi R1 defconfig
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
board/sunxi/MAINTAINERS | 5 +++++
configs/orangepi_r1_defconfig | 19 +++++++++++++++++++
2 files changed, 24 insertions(+)
create mode 100644 configs/orangepi_r1_defconfig
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -302,6 +302,11 @@ M: Jagan Teki <jagan@amarulasolutions.co
S: Maintained
F: configs/orangepi_prime_defconfig
+ORANGEPI R1 BOARD
+M: Hauke Mehrtens <hauke@hauke-m.de>
+S: Maintained
+F: configs/orangepi_r1_defconfig
+
PINE64 BOARDS
M: Andre Przywara <andre.przywara@arm.com>
S: Maintained
--- /dev/null
+++ b/configs/orangepi_r1_defconfig
@@ -0,0 +1,19 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_MACH_SUN8I_H3=y
+CONFIG_DRAM_CLK=624
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+# CONFIG_VIDEO_DE2 is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-r1"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_CONSOLE_MUX=y
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_SPL_SPI_SUNXI=y
+CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y

177
package/boot/uboot-sunxi/patches/300-sunxi-add-device-tree-for-Orange-Pi-R1-board.patch → package/boot/uboot-sunxi/patches/320-sunxi-Add-support-for-Orange-Pi-R1.patch
View File

@ -1,14 +1,20 @@
From 1f92596cc520f760589289059a5aa739366dd19c Mon Sep 17 00:00:00 2001 From 068fb0d5728c5ec93cb961718d59e7c718886edd Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de> From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Tue, 26 Sep 2017 22:16:59 +0200 Date: Tue, 26 Sep 2017 22:16:59 +0200
Subject: sunxi: add device tree for Orange Pi R1 board Subject: sunxi: Add support for Orange Pi R1
The device tree files are also submitted for inclusion into the Linux
kernel.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
--- ---
arch/arm/dts/Makefile | 1 + arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts | 157 +++++++++++++++++++++++++++++ arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts | 77 ++++++++++++++++++++++++++++++
2 files changed, 158 insertions(+) board/sunxi/MAINTAINERS | 5 ++
configs/orangepi_r1_defconfig | 26 ++++++++++
4 files changed, 109 insertions(+)
create mode 100644 arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts create mode 100644 arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
create mode 100644 configs/orangepi_r1_defconfig
--- a/arch/arm/dts/Makefile --- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile
@ -22,15 +28,9 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
sun8i-h3-orangepi-2.dtb \ sun8i-h3-orangepi-2.dtb \
--- /dev/null --- /dev/null
+++ b/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts +++ b/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
@@ -0,0 +1,157 @@ @@ -0,0 +1,91 @@
+/* +/*
+ * Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de> + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun8i-h2-plus-orangepi-zero.dts, which is:
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun8i-h3-orangepi-one.dts, which is:
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ * + *
+ * This file is dual-licensed: you can use it either under the terms + * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual + * of the GPL or the X11 license, at your option. Note that this dual
@ -71,112 +71,87 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ * OTHER DEALINGS IN THE SOFTWARE. + * OTHER DEALINGS IN THE SOFTWARE.
+ */ + */
+ +
+/dts-v1/; +/* Orange Pi R1 is based on Orange Pi Zero design */
+#include "sun8i-h3.dtsi" +#include "sun8i-h2-plus-orangepi-zero.dts"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+ +
+/ { +/ {
+ model = "Xunlong Orange Pi R1"; + model = "Xunlong Orange Pi R1";
+ compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus"; + compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
+ +
+ aliases { + /delete-node/ reg_vcc_wifi;
+ serial0 = &uart0;
+ /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+ ethernet1 = &xr819;
+ };
+ +
+ chosen { + /*
+ stdout-path = "serial0:115200n8"; + * Ths pin of this regulator is the same with the Wi-Fi extra
+ }; + * regulator on the original Zero. However it's used for USB
+ + * Ethernet rather than the Wi-Fi now.
+ leds { + */
+ compatible = "gpio-leds"; + reg_vcc_usb_eth: reg-vcc-usb-ethernet {
+
+ pwr_led {
+ label = "orangepi:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ status_led {
+ label = "orangepi:red:status";
+ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_vcc_wifi: reg_vcc_wifi {
+ compatible = "regulator-fixed"; + compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>; + regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc-wifi"; + regulator-name = "vcc-usb-ethernet";
+ enable-active-high; + enable-active-high;
+ gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; + gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ }; + };
+ +
+ wifi_pwrseq: wifi_pwrseq { + aliases {
+ compatible = "mmc-pwrseq-simple"; + ethernet1 = &rtl8189etv;
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ phy = <&phy1>;
+ phy-mode = "mii";
+ allwinner,use-internal-phy;
+ allwinner,leds-active-low;
+ status = "okay";
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>;
+ vmmc-supply = <&reg_vcc_wifi>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ /*
+ * Explicitly define the sdio device, so that we can add an ethernet
+ * alias for it (which e.g. makes u-boot set a mac-address).
+ */
+ xr819: sdio_wifi@1 {
+ reg = <1>;
+ }; + };
+}; +};
+ +
+&ohci1 { +&ohci1 {
+ status = "okay"; + /*
+ * RTL8152B USB-Ethernet adapter is connected to USB1,
+ * and it's a USB 2.0 device. So the OHCI1 controller
+ * can be left disabled.
+ */
+ status = "disabled";
+}; +};
+ +
+&uart0 { +&mmc1 {
+ pinctrl-names = "default"; + vmmc-supply = <&reg_vcc3v3>;
+ pinctrl-0 = <&uart0_pins_a>; + vqmmc-supply = <&reg_vcc3v3>;
+ status = "okay"; +
+ rtl8189etv: sdio_wifi@1 {
+ reg = <1>;
+ };
+}; +};
+ +
+&usbphy { +&usbphy {
+ /* USB VBUS is always on */ + usb1_vbus-supply = <&reg_vcc_usb_eth>;
+ status = "okay";
+}; +};
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -302,6 +302,11 @@ M: Jagan Teki <jagan@amarulasolutions.co
S: Maintained
F: configs/orangepi_prime_defconfig
+ORANGEPI R1 BOARD
+M: Hauke Mehrtens <hauke@hauke-m.de>
+S: Maintained
+F: configs/orangepi_r1_defconfig
+
PINE64 BOARDS
M: Andre Przywara <andre.przywara@arm.com>
S: Maintained
--- /dev/null
+++ b/configs/orangepi_r1_defconfig
@@ -0,0 +1,18 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_MACH_SUN8I_H3=y
+CONFIG_DRAM_CLK=624
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+# CONFIG_VIDEO_DE2 is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-r1"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_CONSOLE_MUX=y
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_SPL_SPI_SUNXI=y
+CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y