uboot-kirkwood: add uboot for CheckPoint L-50

This patch add u-boot for CheckPoint L-50 routers.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
master
Pawel Dembicki 2020-01-24 07:13:24 +01:00 committed by Petr Štetiar
parent 9c99187e61
commit c881d7ab03
5 changed files with 1078 additions and 2 deletions

View File

@ -54,6 +54,11 @@ define U-Boot/iconnect_second_stage
BUILD_DEVICES:=iom_iconnect-1.1
endef
define U-Boot/l-50
NAME:=CheckPoint L-50
BUILD_DEVICES:=checkpoint_l-50
endef
define U-Boot/nsa310
NAME:=Zyxel NSA310
BUILD_DEVICES:=zyxel_nsa310b
@ -89,6 +94,7 @@ UBOOT_TARGETS := \
goflexhome \
ib62x0 ib62x0_second_stage \
iconnect iconnect_second_stage \
l-50 \
nsa310 \
nsa310s \
nsa325 \

View File

@ -0,0 +1,928 @@
From 742f780f62ace452b83e2463f1f1afdda4b724ea Mon Sep 17 00:00:00 2001
From: Pawel Dembicki <paweldembicki@gmail.com>
Date: Sun, 26 Jan 2020 07:27:24 +0100
Subject: [PATCH] arm: kirkwood: add CheckPoint L-50 device
This patch adds support for the Check Point L-50 from 600/1100 series
routers.
Specification:
-CPU: Marvell Kirkwood 88F6821 1200MHz
-RAM: 512MB
-Flash: NAND 512MB
-WiFi: mPCIe card based on Atheros AR9287 b/g/n
-WAN: 1 Gigabit Port (Marvell 88E1116R PHY)
-LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+4))
-USB: 2x USB2.0
-Express card slot
-SD card slot
-Serial console: RJ-45 115200 8n1
-Unsupported DSL
Known limitations:
- In board is used two switches in chain. Second Marvell is not used
in u-Boot.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/kirkwood-l-50.dts | 439 +++++++++++++++++++++++++++++
arch/arm/mach-kirkwood/Kconfig | 4 +
board/checkpoint/l-50/Kconfig | 12 +
board/checkpoint/l-50/MAINTAINERS | 6 +
board/checkpoint/l-50/Makefile | 11 +
board/checkpoint/l-50/kwbimage.cfg | 36 +++
board/checkpoint/l-50/l-50.c | 172 +++++++++++
board/checkpoint/l-50/l-50.h | 29 ++
configs/l-50_defconfig | 59 ++++
include/configs/l-50.h | 59 ++++
11 files changed, 828 insertions(+)
create mode 100644 arch/arm/dts/kirkwood-l-50.dts
create mode 100644 board/checkpoint/l-50/Kconfig
create mode 100644 board/checkpoint/l-50/MAINTAINERS
create mode 100644 board/checkpoint/l-50/Makefile
create mode 100644 board/checkpoint/l-50/kwbimage.cfg
create mode 100644 board/checkpoint/l-50/l-50.c
create mode 100644 board/checkpoint/l-50/l-50.h
create mode 100644 configs/l-50_defconfig
create mode 100644 include/configs/l-50.h
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -51,6 +51,7 @@ dtb-$(CONFIG_KIRKWOOD) += \
kirkwood-iconnect.dtb \
kirkwood-is2.dtb \
kirkwood-km_kirkwood.dtb \
+ kirkwood-l-50.dtb \
kirkwood-lsxhl.dtb \
kirkwood-lschlv2.dtb \
kirkwood-net2big.dtb \
--- /dev/null
+++ b/arch/arm/dts/kirkwood-l-50.dts
@@ -0,0 +1,439 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Check Point L-50 Board Description
+ * Copyright 2020 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "Check Point L-50";
+ compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+ };
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+ pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>;
+ pinctrl-names = "default";
+
+ pmx_sysrst: pmx-sysrst {
+ marvell,pins = "mpp6";
+ marvell,function = "sysrst";
+ };
+
+ pmx_button29: pmx_button29 {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_led38: pmx_led38 {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+
+ pmx_sdio_cd: pmx-sdio-cd {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ mvsdio@90000 {
+ status = "okay";
+ cd-gpios = <&gpio1 14 9>;
+ };
+
+ i2c@11000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ gpio2: gpio-expander@20{
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ compatible = "semtech,sx1505q";
+ reg = <0x20>;
+
+ gpio-controller;
+ };
+
+ /* Three GPIOs from 0x21 exp. are undescribed in dts:
+ * 1: DSL module reset (active low)
+ * 5: mPCIE reset (active low)
+ * 6: Express card reset (active low)
+ */
+ gpio3: gpio-expander@21{
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ compatible = "semtech,sx1505q";
+ reg = <0x21>;
+
+ gpio-controller;
+ };
+
+ rtc@30 {
+ compatible = "s35390a";
+ reg = <0x30>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status_green {
+ label = "l-50:green:status";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+
+ status_red {
+ label = "l-50:red:status";
+ gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "l-50:green:wifi";
+ gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ internet_green {
+ label = "l-50:green:internet";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+
+ internet_red {
+ label = "l-50:red:internet";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+
+ usb1_green {
+ label = "l-50:green:usb1";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port3>;
+ };
+
+ usb1_red {
+ label = "l-50:red:usb1";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ };
+
+ usb2_green {
+ label = "l-50:green:usb2";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port1>;
+ };
+
+ usb2_red {
+ label = "l-50:red:usb2";
+ gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb2_pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "usb2_pwr";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
+ regulator-always-on;
+ };
+
+ usb1_pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_pwr";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
+ regulator-always-on;
+ };
+
+ mpcie_pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "mpcie_pwr";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ express_card_pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "express_card_pwr";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ factory_defaults {
+ label = "factory_defaults";
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy8: ethernet-phy@8 {
+ reg = <0x08>;
+ };
+
+ switch0: switch@10 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10>;
+ dsa,member = <0 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan5";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan6";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan2";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan7";
+ };
+
+ switch0port5: port@5 {
+ reg = <5>;
+ phy-mode = "rgmii-txid";
+ link = <&switch1port5>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ phy-mode = "rgmii-id";
+ ethernet = <&eth1port>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
+ switch@11 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11>;
+ dsa,member = <0 1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan3";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan8";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan4";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "dmz";
+ };
+
+ switch1port5: port@5 {
+ reg = <5>;
+ phy-mode = "rgmii-txid";
+ link = <&switch0port5>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "dsl";
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <&ethphy8>;
+ };
+};
+
+&eth1 {
+ status = "okay";
+ ethernet1-port@0 {
+ speed = <1000>;
+ duplex = <1>;
+ phy-handle = <&switch0>;
+ };
+};
+
+&nand {
+ status = "okay";
+ pinctrl-0 = <&pmx_nand>;
+ pinctrl-names = "default";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x000c0000>;
+ };
+
+ partition@a0000 {
+ label = "bootldr-env";
+ reg = <0x000c0000 0x00040000>;
+ };
+
+ partition@100000 {
+ label = "kernel-1";
+ reg = <0x00100000 0x00800000>;
+ };
+
+ partition@900000 {
+ label = "rootfs-1";
+ reg = <0x00900000 0x07100000>;
+ };
+
+ partition@7a00000 {
+ label = "kernel-2";
+ reg = <0x07a00000 0x00800000>;
+ };
+
+ partition@8200000 {
+ label = "rootfs-2";
+ reg = <0x08200000 0x07100000>;
+ };
+
+ partition@f300000 {
+ label = "default_sw";
+ reg = <0x0f300000 0x07900000>;
+ };
+
+ partition@16c00000 {
+ label = "logs";
+ reg = <0x16c00000 0x01800000>;
+ };
+
+ partition@18400000 {
+ label = "preset_cfg";
+ reg = <0x18400000 0x00100000>;
+ };
+
+ partition@18500000 {
+ label = "adsl";
+ reg = <0x18500000 0x00100000>;
+ };
+
+ partition@18600000 {
+ label = "storage";
+ reg = <0x18600000 0x07a00000>;
+ };
+};
+
+&rtc {
+ status = "disabled";
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&sata_phy0 {
+ status = "disabled";
+};
+
+&sata_phy1 {
+ status = "disabled";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ #trigger-source-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ hub_port3: port@3 {
+ reg = <3>;
+ #trigger-source-cells = <0>;
+ };
+ };
+};
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -74,6 +74,9 @@ config TARGET_DB_88F6281_BP
config TARGET_NSA325
bool "Zyxel NSA325 board"
+config TARGET_L50
+ bool "Check Point L-50"
+
endchoice
config SYS_SOC
@@ -102,5 +105,6 @@ source "board/zyxel/nsa325/Kconfig"
source "board/alliedtelesis/SBx81LIFKW/Kconfig"
source "board/alliedtelesis/SBx81LIFXCAT/Kconfig"
source "board/Marvell/db-88f6281-bp/Kconfig"
+source "board/checkpoint/l-50/Kconfig"
endif
--- /dev/null
+++ b/board/checkpoint/l-50/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_L50
+
+config SYS_BOARD
+ default "l-50"
+
+config SYS_VENDOR
+ default "checkpoint"
+
+config SYS_CONFIG_NAME
+ default "l-50"
+
+endif
--- /dev/null
+++ b/board/checkpoint/l-50/MAINTAINERS
@@ -0,0 +1,6 @@
+L50 BOARD
+M: Pawel Dembicki <paweldembicki@gmail.com>
+S: Maintained
+F: board/checkpoint/l-50/
+F: include/configs/l-50.h
+F: configs/l-50_defconfig
--- /dev/null
+++ b/board/checkpoint/l-50/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2020
+# Pawel Dembicki <paweldembicki@gmail.com>
+#
+# Based on Kirkwood support:
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+obj-y := l-50.o
--- /dev/null
+++ b/board/checkpoint/l-50/kwbimage.cfg
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Values taken from original bootloader source.
+# Based on:
+# dramregs_seattle_400rd_A.txt from uboot_src_CP600_1100.
+
+# Boot Media configurations
+BOOT_FROM nand
+NAND_ECC_MODE default
+NAND_PAGE_SIZE 0x0800
+
+DATA 0xFFD100e0 0x1b1b1b9b
+DATA 0xFFD01400 0x43000c30
+DATA 0xFFD01404 0x39543000
+DATA 0xFFD01408 0x22125451
+DATA 0xFFD0140C 0x00000833
+DATA 0xFFD01410 0x000000cc
+DATA 0xFFD01414 0x00000000
+DATA 0xFFD01418 0x00000000
+DATA 0xFFD0141C 0x00000C52
+DATA 0xFFD01420 0x00000004
+DATA 0xFFD01424 0x0000F17F
+DATA 0xFFD01428 0x00085520
+DATA 0xFFD0147C 0x00008552
+DATA 0xFFD01504 0x0FFFFFF1
+DATA 0xFFD01508 0x10000000
+DATA 0xFFD0150C 0x0FFFFFF5
+DATA 0xFFD01514 0x00000000
+DATA 0xFFD0151C 0x00000000
+DATA 0xFFD01494 0x00120012
+DATA 0xFFD01498 0x00000000
+DATA 0xFFD0149C 0x0000E40F
+DATA 0xFFD01480 0x00000001
+DATA 0xFFD20134 0x66666666
+DATA 0xFFD20138 0x66666666
+DATA 0x0 0x0
--- /dev/null
+++ b/board/checkpoint/l-50/l-50.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020
+ * Pawel Dembicki <paweldembicki@gmail.com>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/mpp.h>
+#include <asm/arch/gpio.h>
+#include "l-50.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ /* Gpio configuration */
+ mvebu_config_gpio(L50_OE_VAL_LOW, L50_OE_VAL_HIGH,
+ L50_OE_LOW, L50_OE_HIGH);
+
+ /* Multi-Purpose Pins Functionality configuration */
+ static const u32 kwmpp_config[] = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP7_SPI_SCn,
+ MPP8_TW_SDA,
+ MPP9_TW_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_SD_CLK,
+ MPP13_SD_CMD,
+ MPP14_SD_D0,
+ MPP15_SD_D1,
+ MPP16_SD_D2,
+ MPP17_SD_D3,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_GE1_0,
+ MPP21_GE1_1,
+ MPP22_GE1_2,
+ MPP23_GE1_3,
+ MPP24_GE1_4,
+ MPP25_GE1_5,
+ MPP26_GE1_6,
+ MPP27_GE1_7,
+ MPP28_GPIO,
+ MPP29_GPIO,
+ MPP30_GE1_10,
+ MPP31_GE1_11,
+ MPP32_GE1_12,
+ MPP33_GE1_13,
+ MPP34_GPIO,
+ MPP35_GPIO,
+ MPP36_AUDIO_SPDIFI, /* value from stock u-boot */
+ MPP37_GPIO,
+ MPP38_GPIO,
+ MPP39_TDM_SPI_CS0,
+ MPP40_GPIO,
+ MPP41_GPIO,
+ MPP42_TDM_SPI_MOSI,
+ MPP43_TDM_CODEC_INTn,
+ MPP44_GPIO,
+ MPP45_TDM_PCLK,
+ MPP46_GPIO,
+ MPP47_TDM_DRX,
+ MPP48_GPIO,
+ MPP49_GPIO,
+ 0
+ };
+ kirkwood_mpp_conf(kwmpp_config, NULL);
+
+ return 0;
+}
+
+void board_gpio_expander_init(void)
+{
+ struct udevice *dev0, *dev1;
+ uchar data_buffer;
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(0, L50_GPIO0_I2C_ADDRESS, 1, &dev0);
+ if (ret) {
+ debug("%s: Cannot find I2C GPIO expander chip 0x02%X\n",
+ __func__, L50_GPIO0_I2C_ADDRESS);
+ return;
+ }
+
+ ret = i2c_get_chip_for_busnum(0, L50_GPIO1_I2C_ADDRESS, 1, &dev1);
+ if (ret) {
+ debug("%s: Cannot find I2C GPIO expander chip 0x02%X\n",
+ __func__, L50_GPIO1_I2C_ADDRESS);
+ return;
+ }
+
+ /* Set IO as output */
+ data_buffer = 0x0;
+ dm_i2c_write(dev0, 1, &data_buffer, 1);
+ dm_i2c_write(dev1, 1, &data_buffer, 1);
+
+ /* Set all leds off, reset asserted, pwr off */
+ data_buffer = 0xbf;
+ dm_i2c_write(dev0, 0, &data_buffer, 1);
+ data_buffer = 0x1c;
+ dm_i2c_write(dev1, 0, &data_buffer, 1);
+
+ mdelay(100);
+
+ /* Set pwr on */
+ data_buffer = 0xa5;
+ dm_i2c_write(dev1, 0, &data_buffer, 1);
+
+ mdelay(100);
+
+ /* Set reset deasserted, status red led enabled*/
+ data_buffer = 0xff;
+ dm_i2c_write(dev0, 0, &data_buffer, 1);
+ data_buffer = 0xe3;
+ dm_i2c_write(dev1, 0, &data_buffer, 1);
+}
+
+int board_init(void)
+{
+ /* Boot parameters address */
+ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
+
+ board_gpio_expander_init();
+
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+/* Configure and initialize PHY */
+void reset_phy(void)
+{
+ u16 devadr;
+ char *name = "ethernet-controller@72000";
+
+ if (miiphy_set_current_dev(name))
+ return;
+
+ /* command to read PHY dev address */
+ if (miiphy_read(name, 0xEE, 0xEE, (u16 *)&devadr)) {
+ printf("Err..(%s) could not read PHY dev address\n", __func__);
+ return;
+ }
+
+ /*
+ * Fix PHY led configuration
+ */
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 3);
+ miiphy_write(name, devadr, 0x10, 0x1177);
+ miiphy_write(name, devadr, 0x11, 0x4417);
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
+
+ debug("88E1116 Initialized on %s\n", name);
+}
+#endif /* CONFIG_RESET_PHY_R */
--- /dev/null
+++ b/board/checkpoint/l-50/l-50.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020
+ * Pawel Dembicki <paweldembicki@gmail.com>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#ifndef __L50_H
+#define __L50_H
+
+/* GPIO configuration */
+#define L50_OE_LOW 0x30000000
+#define L50_OE_HIGH 0x0000004c
+#define L50_OE_VAL_LOW 0x00000000
+#define L50_OE_VAL_HIGH 0x00000000
+
+/* Expander GPIO addresses */
+
+#define L50_GPIO0_I2C_ADDRESS 0x20
+#define L50_GPIO1_I2C_ADDRESS 0x21
+
+/* PHY register */
+#define MV88E1116_PGADR_REG 22
+
+#endif /* __L50_H */
--- /dev/null
+++ b/configs/l-50_defconfig
@@ -0,0 +1,59 @@
+CONFIG_ARM=y
+CONFIG_SYS_DCACHE_OFF=y
+CONFIG_ARCH_CPU_INIT=y
+CONFIG_KIRKWOOD=y
+CONFIG_SYS_TEXT_BASE=0x600000
+CONFIG_TARGET_L50=y
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0xC0000
+CONFIG_ENV_SECT_SIZE=0x20000
+CONFIG_ENV_ADDR=0xC0000
+CONFIG_IDENT_STRING="\nCheck Point L-50"
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_BOOTDELAY=1
+CONFIG_CONSOLE_MUX=y
+CONFIG_DISPLAY_BOARDINFO=y
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_FLASH is not set
+#CONFIG_CMD_IDE=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_JFFS2=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xc0000@0x0(u-boot)ro,0x40000@0xc0000(bootldr-env),0x7900000@0x100000(ubi),0x800000@0x7a00000(kernel-2),0x7100000@0x8200000(rootfs-2),0x7900000@0xf300000(default_sw),0x1800000@0x16c00000(logs),0x100000@0x18400000(preset_cfg),0x100000@0x18500000(adsl),-@0x18600000(storage)"
+CONFIG_CMD_UBI=y
+CONFIG_ISO_PARTITION=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="kirkwood-l-50"
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_DM=y
+CONFIG_DM_ETH=y
+#CONFIG_MVSATA_IDE=y
+CONFIG_MMC=y
+CONFIG_MVGBE=y
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MARVELL=y
+CONFIG_MV88E61XX_SWITCH=y
+CONFIG_MV88E61XX_CPU_PORT=6
+CONFIG_MV88E61XX_PHY_PORTS=0x01f
+CONFIG_MV88E61XX_FIXED_PORTS=0
+#CONFIG_DM_RTC=y
+#CONFIG_RTC_MV=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
--- /dev/null
+++ b/include/configs/l-50.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020
+ * Pawel Dembicki <paweldembicki@gmail.com>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#ifndef _CONFIG_L50_H
+#define _CONFIG_L50_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
+#define CONFIG_KW88F6281 /* SOC Name */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/* Remove or override few declarations from mv-common.h */
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS {1, 1} /* enable port 0 only */
+#define CONFIG_NETCONSOLE
+#endif
+
+#define CONFIG_MV88E61XX_CPU_PORT_RX_DELAY
+#define CONFIG_MV88E61XX_CPU_PORT_TX_DELAY
+
+/*
+ * Enable GPI0 support
+ */
+#define CONFIG_KIRKWOOD_GPIO
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND \
+ "ubi part ubi; " \
+ "ubi read 0x800000 kernel; " \
+ "bootm 0x800000"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootargs=console=ttyS0,115200\0" \
+ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+ "bootargs_root=\0"
+#endif /* _CONFIG_L50_H */

View File

@ -1,8 +1,8 @@
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -103,4 +103,7 @@ source "board/alliedtelesis/SBx81LIFKW/K
source "board/alliedtelesis/SBx81LIFXCAT/Kconfig"
@@ -107,4 +107,7 @@ source "board/alliedtelesis/SBx81LIFXCAT
source "board/Marvell/db-88f6281-bp/Kconfig"
source "board/checkpoint/l-50/Kconfig"
+config SECOND_STAGE
+ bool "OpenWrt second stage hack"
@ -35,6 +35,17 @@
+#include "openwrt-kirkwood-common.h"
+
#endif /* _CONFIG_ICONNECT_H */
--- a/include/configs/l-50.h
+++ b/include/configs/l-50.h
@@ -12,6 +12,8 @@
#ifndef _CONFIG_L50_H
#define _CONFIG_L50_H
+#include "openwrt-kirkwood-common.h"
+
/*
* High Level Configuration Options (easy to change)
*/
--- /dev/null
+++ b/include/configs/openwrt-kirkwood-common.h
@@ -0,0 +1,31 @@
@ -139,6 +150,17 @@
+CONFIG_FIT_VERBOSE=y
CONFIG_LZMA=y
+CONFIG_LZO=y
--- a/configs/l-50_defconfig
+++ b/configs/l-50_defconfig
@@ -57,3 +57,8 @@ CONFIG_SYS_I2C_MVTWSI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_LZMA=y
+CONFIG_LZO=y
--- a/configs/nsa310_defconfig
+++ b/configs/nsa310_defconfig
@@ -43,6 +43,9 @@ CONFIG_CMD_UBI=y

View File

@ -0,0 +1,53 @@
From 940e9a5828480e4185c9a276ad7f35a4069a2393 Mon Sep 17 00:00:00 2001
From: Pawel Dembicki <paweldembicki@gmail.com>
Date: Thu, 23 Jan 2020 22:04:15 +0100
Subject: [PATCH 1/2] phy: mv88e61xx: add support for RGMII TX/RX delay
Clock delay in RGMII is required for some boards.
This patch introduce CONFIG_MV88E61XX_CPU_PORT_TX_DELAY and
CONFIG_MV88E61XX_CPU_PORT_RX_DELAY defines, which are setting
proper bits in PORT_REG_PHYS_CTRL register.
Cc: Chris Packham <judge.packham@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
drivers/net/phy/mv88e61xx.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c
index 5aff7ed397..889327639d 100644
--- a/drivers/net/phy/mv88e61xx.c
+++ b/drivers/net/phy/mv88e61xx.c
@@ -94,6 +94,8 @@
#define PORT_REG_STATUS_CMODE_1000BASE_X 0x9
#define PORT_REG_STATUS_CMODE_SGMII 0xa
+#define PORT_REG_PHYS_CTRL_RGMII_RX_DELAY BIT(15)
+#define PORT_REG_PHYS_CTRL_RGMII_TX_DELAY BIT(14)
#define PORT_REG_PHYS_CTRL_PCS_AN_EN BIT(10)
#define PORT_REG_PHYS_CTRL_PCS_AN_RST BIT(9)
#define PORT_REG_PHYS_CTRL_FC_VALUE BIT(7)
@@ -747,9 +749,16 @@ static int mv88e61xx_fixed_port_setup(struct phy_device *phydev, u8 port)
PORT_REG_PHYS_CTRL_SPD1000;
}
- if (port == CONFIG_MV88E61XX_CPU_PORT)
+ if (port == CONFIG_MV88E61XX_CPU_PORT) {
val |= PORT_REG_PHYS_CTRL_LINK_VALUE |
PORT_REG_PHYS_CTRL_LINK_FORCE;
+#if defined(CONFIG_MV88E61XX_CPU_PORT_RX_DELAY)
+ val |= PORT_REG_PHYS_CTRL_RGMII_RX_DELAY;
+#endif
+#if defined(CONFIG_MV88E61XX_CPU_PORT_TX_DELAY)
+ val |= PORT_REG_PHYS_CTRL_RGMII_TX_DELAY;
+#endif
+ }
return mv88e61xx_port_write(phydev, port, PORT_REG_PHYS_CTRL,
val);
--
2.20.1

View File

@ -0,0 +1,67 @@
From 7ffab66a99831ce5e3037b608d73565c9d1abd20 Mon Sep 17 00:00:00 2001
From: Pawel Dembicki <paweldembicki@gmail.com>
Date: Thu, 23 Jan 2020 22:09:51 +0100
Subject: [PATCH 2/2] phy: mv88e61xx: add support for MV88E6171
This patch add MV88E6171 id to driver data.
Tested on Checkpoint L-50 board.
Cc: Chris Packham <judge.packham@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
drivers/net/phy/mv88e61xx.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c
index 889327639d..e0b648a54e 100644
--- a/drivers/net/phy/mv88e61xx.c
+++ b/drivers/net/phy/mv88e61xx.c
@@ -180,6 +180,7 @@
#define PORT_SWITCH_ID_6071 0x0710
#define PORT_SWITCH_ID_6096 0x0980
#define PORT_SWITCH_ID_6097 0x0990
+#define PORT_SWITCH_ID_6171 0x1710
#define PORT_SWITCH_ID_6172 0x1720
#define PORT_SWITCH_ID_6176 0x1760
#define PORT_SWITCH_ID_6220 0x2200
@@ -997,6 +998,7 @@ static int mv88e61xx_probe(struct phy_device *phydev)
switch (priv->id) {
case PORT_SWITCH_ID_6096:
case PORT_SWITCH_ID_6097:
+ case PORT_SWITCH_ID_6171:
case PORT_SWITCH_ID_6172:
case PORT_SWITCH_ID_6176:
case PORT_SWITCH_ID_6240:
@@ -1152,6 +1154,17 @@ static struct phy_driver mv88e61xx_driver = {
.shutdown = &genphy_shutdown,
};
+static struct phy_driver mv88e617x_driver = {
+ .name = "Marvell MV88E617x",
+ .uid = 0x01410e70,
+ .mask = 0xfffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .probe = mv88e61xx_probe,
+ .config = mv88e61xx_phy_config,
+ .startup = mv88e61xx_phy_startup,
+ .shutdown = &genphy_shutdown,
+};
+
static struct phy_driver mv88e609x_driver = {
.name = "Marvell MV88E609x",
.uid = 0x1410c89,
@@ -1177,6 +1190,7 @@ static struct phy_driver mv88e6071_driver = {
int phy_mv88e61xx_init(void)
{
phy_register(&mv88e61xx_driver);
+ phy_register(&mv88e617x_driver);
phy_register(&mv88e609x_driver);
phy_register(&mv88e6071_driver);
--
2.20.1