hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ipq806x: Add ADM support 

These are cherry-picked & backported from LKML:
*https://lkml.org/lkml/2015/3/17/19

They are enabled on both 3.18 and 4.1 kernel. Patches 150 to 154 are
applying changes merged since 3.18; they enable mechanisms used by the
ADM driver.

ADM engine is used by the NAND controller, so it is necessary to
bring-up NAND flash support.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46567
lede-17.01
Felix Fietkau 2015-08-07 08:36:16 +00:00
parent de19f06d12
commit c7bf2accc9
18 changed files with 2448 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
target/linux/ipq806x/config-3.18
View File

@ -327,6 +327,7 @@ CONFIG_PREEMPT_RCU=y
CONFIG_PRINTK_TIME=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PTP_1588_CLOCK=y
# CONFIG_QCOM_ADM is not set
CONFIG_QCOM_BAM_DMA=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_HFPLL=y

1
target/linux/ipq806x/config-4.1
View File

@ -341,6 +341,7 @@ CONFIG_PREEMPT_RCU=y
CONFIG_PRINTK_TIME=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PTP_1588_CLOCK=y
# CONFIG_QCOM_ADM is not set
CONFIG_QCOM_BAM_DMA=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_HFPLL=y

2
target/linux/ipq806x/patches-3.18/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch
View File

@ -1,6 +1,6 @@
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -109,5 +109,29 @@
@@ -114,5 +114,29 @@
sata@29000000 {
status = "ok";
};

70
target/linux/ipq806x/patches-3.18/150-dmaengine-Rework-dma_chan_get.patch Normal file
View File

@ -0,0 +1,70 @@
From d2f4f99db3e9ec8b063cf2e45704e2bb95428317 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Mon, 17 Nov 2014 14:41:58 +0100
Subject: [PATCH] dmaengine: Rework dma_chan_get
dma_chan_get uses a rather interesting error handling and code path.
Change it to something more usual in the kernel.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
drivers/dma/dmaengine.c | 36 +++++++++++++++++++-----------------
1 file changed, 19 insertions(+), 17 deletions(-)
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -222,31 +222,33 @@ static void balance_ref_count(struct dma
*/
static int dma_chan_get(struct dma_chan *chan)
{
- int err = -ENODEV;
struct module *owner = dma_chan_to_owner(chan);
+ int ret;
+ /* The channel is already in use, update client count */
if (chan->client_count) {
__module_get(owner);
- err = 0;
- } else if (try_module_get(owner))
- err = 0;
+ goto out;
+ }
- if (err == 0)
- chan->client_count++;
+ if (!try_module_get(owner))
+ return -ENODEV;
/* allocate upon first client reference */
- if (chan->client_count == 1 && err == 0) {
- int desc_cnt = chan->device->device_alloc_chan_resources(chan);
-
- if (desc_cnt < 0) {
- err = desc_cnt;
- chan->client_count = 0;
- module_put(owner);
- } else if (!dma_has_cap(DMA_PRIVATE, chan->device->cap_mask))
- balance_ref_count(chan);
- }
-
- return err;
+ ret = chan->device->device_alloc_chan_resources(chan);
+ if (ret < 0)
+ goto err_out;
+
+ if (!dma_has_cap(DMA_PRIVATE, chan->device->cap_mask))
+ balance_ref_count(chan);
+
+out:
+ chan->client_count++;
+ return 0;
+
+err_out:
+ module_put(owner);
+ return ret;
}
/**

27
target/linux/ipq806x/patches-3.18/151-dmaengine-Remove-the-need-to-declare-device_control.patch Normal file
View File

@ -0,0 +1,27 @@
From 4f8ef9f4140cc286d7d1cf9237da7a7439e4fc0b Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Mon, 17 Nov 2014 14:42:03 +0100
Subject: [PATCH] dmaengine: Remove the need to declare device_control
In order to migrate the drivers without triggering a BUG_ON for the converted
drivers, which would cause bisectability issues, we need to remove that check
before removing the device_control function entirely.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
drivers/dma/dmaengine.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -814,8 +814,6 @@ int dma_async_device_register(struct dma
!device->device_prep_dma_sg);
BUG_ON(dma_has_cap(DMA_CYCLIC, device->cap_mask) &&
!device->device_prep_dma_cyclic);
- BUG_ON(dma_has_cap(DMA_SLAVE, device->cap_mask) &&
- !device->device_control);
BUG_ON(dma_has_cap(DMA_INTERLEAVE, device->cap_mask) &&
!device->device_prep_interleaved_dma);

62
target/linux/ipq806x/patches-3.18/152-dmaengine-Make-channel-allocation-callbacks-optional.patch Normal file
View File

@ -0,0 +1,62 @@
From c4b54a648e682f678c338619df848233a6babc46 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Mon, 17 Nov 2014 14:41:59 +0100
Subject: [PATCH] dmaengine: Make channel allocation callbacks optional
Nowadays, some drivers don't have anything in there channel allocation
callbacks anymore.
Remove the BUG_ON if those callbacks aren't implemented, in order to allow
drivers to not implement them.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
drivers/dma/dmaengine.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -235,9 +235,11 @@ static int dma_chan_get(struct dma_chan
return -ENODEV;
/* allocate upon first client reference */
- ret = chan->device->device_alloc_chan_resources(chan);
- if (ret < 0)
- goto err_out;
+ if (chan->device->device_alloc_chan_resources) {
+ ret = chan->device->device_alloc_chan_resources(chan);
+ if (ret < 0)
+ goto err_out;
+ }
if (!dma_has_cap(DMA_PRIVATE, chan->device->cap_mask))
balance_ref_count(chan);
@@ -259,11 +261,15 @@ err_out:
*/
static void dma_chan_put(struct dma_chan *chan)
{
+ /* This channel is not in use, bail out */
if (!chan->client_count)
- return; /* this channel failed alloc_chan_resources */
+ return;
+
chan->client_count--;
module_put(dma_chan_to_owner(chan));
- if (chan->client_count == 0)
+
+ /* This channel is not in use anymore, free it */
+ if (!chan->client_count && chan->device->device_free_chan_resources)
chan->device->device_free_chan_resources(chan);
}
@@ -817,8 +823,6 @@ int dma_async_device_register(struct dma
BUG_ON(dma_has_cap(DMA_INTERLEAVE, device->cap_mask) &&
!device->device_prep_interleaved_dma);
- BUG_ON(!device->device_alloc_chan_resources);
- BUG_ON(!device->device_free_chan_resources);
BUG_ON(!device->device_tx_status);
BUG_ON(!device->device_issue_pending);
BUG_ON(!device->dev);

51
target/linux/ipq806x/patches-3.18/153-dmaengine-Introduce-a-device_config-callback.patch Normal file
View File

@ -0,0 +1,51 @@
From 94a73e30dfe6722e9f4ef19f7892901d7d00eab1 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Mon, 17 Nov 2014 14:42:00 +0100
Subject: [PATCH] dmaengine: Introduce a device_config callback
The fact that the channel configuration is done in device_control is rather
misleading, since it's not really advertised as such, plus, the fact that the
framework exposes a function of its own makes it not really intuitive, while
we're losing the type checking whenever we pass that unsigned long argument.
Add a device_config callback to dma_device, with a fallback on the old
behaviour for now for existing drivers to opt in.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
include/linux/dmaengine.h | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -607,6 +607,8 @@ struct dma_tx_state {
* The function takes a buffer of size buf_len. The callback function will
* be called after period_len bytes have been transferred.
* @device_prep_interleaved_dma: Transfer expression in a generic way.
+ * @device_config: Pushes a new configuration to a channel, return 0 or an error
+ * code
* @device_control: manipulate all pending operations on a channel, returns
* zero or error code
* @device_tx_status: poll for transaction completion, the optional
@@ -673,6 +675,9 @@ struct dma_device {
struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)(
struct dma_chan *chan, struct dma_interleaved_template *xt,
unsigned long flags);
+
+ int (*device_config)(struct dma_chan *chan,
+ struct dma_slave_config *config);
int (*device_control)(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
unsigned long arg);
@@ -696,6 +701,9 @@ static inline int dmaengine_device_contr
static inline int dmaengine_slave_config(struct dma_chan *chan,
struct dma_slave_config *config)
{
+ if (chan->device->device_config)
+ return chan->device->device_config(chan, config);
+
return dmaengine_device_control(chan, DMA_SLAVE_CONFIG,
(unsigned long)config);
}

47
target/linux/ipq806x/patches-3.18/154-dmaengine-Add-device_terminate_all-callback.patch Normal file
View File

@ -0,0 +1,47 @@
From 7fa0cf462daa6f6121b332b87833d7f5bdb515c0 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Mon, 17 Nov 2014 14:42:02 +0100
Subject: [PATCH] dmaengine: Add device_terminate_all callback
Split out the terminate_all command from device_control to a dma_device
callback. In order to preserve backward capability, still rely on
device_control if no such callback has been implemented.
Eventually, this will allow to create a generic dma_slave_caps callback.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
include/linux/dmaengine.h | 6 ++++++
1 file changed, 6 insertions(+)
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -611,6 +611,8 @@ struct dma_tx_state {
* code
* @device_control: manipulate all pending operations on a channel, returns
* zero or error code
+ * @device_terminate_all: Aborts all transfers on a channel. Returns 0
+ * or an error code
* @device_tx_status: poll for transaction completion, the optional
* txstate parameter can be supplied with a pointer to get a
* struct with auxiliary transfer status information, otherwise the call
@@ -680,6 +682,7 @@ struct dma_device {
struct dma_slave_config *config);
int (*device_control)(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
unsigned long arg);
+ int (*device_terminate_all)(struct dma_chan *chan);
enum dma_status (*device_tx_status)(struct dma_chan *chan,
dma_cookie_t cookie,
@@ -789,6 +792,9 @@ static inline int dma_get_slave_caps(str
static inline int dmaengine_terminate_all(struct dma_chan *chan)
{
+ if (chan->device->device_terminate_all)
+ return chan->device->device_terminate_all(chan);
+
return dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
}

76
target/linux/ipq806x/patches-3.18/155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch Normal file
View File

@ -0,0 +1,76 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v6,1/2] dt/bindings: qcom_adm: Fix channel specifiers
From: Andy Gross <agross@codeaurora.org>
X-Patchwork-Id: 6027361
Message-Id: <1426571172-9711-2-git-send-email-agross@codeaurora.org>
To: Vinod Koul <vinod.koul@intel.com>
Cc: devicetree@vger.kernel.org, dmaengine@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, Kumar Gala <galak@codeaurora.org>,
Bjorn Andersson <bjorn.andersson@sonymobile.com>,
Andy Gross <agross@codeaurora.org>
Date: Tue, 17 Mar 2015 00:46:11 -0500
This patch removes the crci information from the dma channel property. At least
one client device requires using more than one CRCI value for a channel. This
does not match the current binding and the crci information needs to be removed.
Instead, the client device will provide this information via other means.
Signed-off-by: Andy Gross <agross@codeaurora.org>
---
Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
+++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
@@ -4,8 +4,7 @@ Required properties:
- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
- reg: Address range for DMA registers
- interrupts: Should contain one interrupt shared by all channels
-- #dma-cells: must be <2>. First cell denotes the channel number. Second cell
- denotes CRCI (client rate control interface) flow control assignment.
+- #dma-cells: must be <1>. First cell denotes the channel number.
- clocks: Should contain the core clock and interface clock.
- clock-names: Must contain "core" for the core clock and "iface" for the
interface clock.
@@ -22,7 +21,7 @@ Example:
compatible = "qcom,adm";
reg = <0x18300000 0x100000>;
interrupts = <0 170 0>;
- #dma-cells = <2>;
+ #dma-cells = <1>;
clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
clock-names = "core", "iface";
@@ -35,15 +34,12 @@ Example:
qcom,ee = <0>;
};
-DMA clients must use the format descripted in the dma.txt file, using a three
+DMA clients must use the format descripted in the dma.txt file, using a two
cell specifier for each channel.
-Each dmas request consists of 3 cells:
+Each dmas request consists of two cells:
1. phandle pointing to the DMA controller
2. channel number
- 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0.
- The CRCI is used for flow control. It identifies the peripheral device that
- is the source/destination for the transferred data.
Example:
@@ -56,7 +52,7 @@ Example:
cs-gpios = <&qcom_pinmux 20 0>;
- dmas = <&adm_dma 6 9>,
- <&adm_dma 5 10>;
+ dmas = <&adm_dma 6>,
+ <&adm_dma 5>;
dma-names = "rx", "tx";
};

958
target/linux/ipq806x/patches-3.18/156-dmaengine-Add-ADM-driver.patch Normal file
View File

@ -0,0 +1,958 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v6,2/2] dmaengine: Add ADM driver
From: Andy Gross <agross@codeaurora.org>
X-Patchwork-Id: 6027351
Message-Id: <1426571172-9711-3-git-send-email-agross@codeaurora.org>
To: Vinod Koul <vinod.koul@intel.com>
Cc: devicetree@vger.kernel.org, dmaengine@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, Kumar Gala <galak@codeaurora.org>,
Bjorn Andersson <bjorn.andersson@sonymobile.com>,
Andy Gross <agross@codeaurora.org>
Date: Tue, 17 Mar 2015 00:46:12 -0500
Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
controller found in the MSM8x60 and IPQ/APQ8064 platforms.
The ADM supports both memory to memory transactions and memory
to/from peripheral device transactions. The controller also provides flow
control capabilities for transactions to/from peripheral devices.
The initial release of this driver supports slave transfers to/from peripherals
and also incorporates CRCI (client rate control interface) flow control.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Reviewed-by: sricharan <sricharan@codeaurora.org>
---
drivers/dma/Kconfig | 10 +
drivers/dma/Makefile | 1 +
drivers/dma/qcom_adm.c | 900 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 911 insertions(+)
create mode 100644 drivers/dma/qcom_adm.c
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -457,4 +457,14 @@ config QCOM_BAM_DMA
Enable support for the QCOM BAM DMA controller. This controller
provides DMA capabilities for a variety of on-chip devices.
+config QCOM_ADM
+ tristate "Qualcomm ADM support"
+ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+ ---help---
+ Enable support for the Qualcomm ADM DMA controller. This controller
+ provides DMA capabilities for both general purpose and on-chip
+ peripheral devices.
+
endif
--- /dev/null
+++ b/drivers/dma/qcom_adm.c
@@ -0,0 +1,896 @@
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_dma.h>
+#include <linux/reset.h>
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+
+#include "dmaengine.h"
+#include "virt-dma.h"
+
+/* ADM registers - calculated from channel number and security domain */
+#define ADM_CHAN_MULTI 0x4
+#define ADM_CI_MULTI 0x4
+#define ADM_CRCI_MULTI 0x4
+#define ADM_EE_MULTI 0x800
+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
+#define ADM_EE_OFFS(ee) (ADM_EE_MULTI * ee)
+#define ADM_CHAN_EE_OFFS(chan, ee) (ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee))
+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
+#define ADM_CI_OFFS(ci) (ADM_CHAN_OFF(ci))
+#define ADM_CH_CMD_PTR(chan, ee) (ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_RSLT(chan, ee) (0x40 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_FLUSH_STATE0(chan, ee) (0x80 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_STATUS_SD(chan, ee) (0x200 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_CONF(chan) (0x240 + ADM_CHAN_OFFS(chan))
+#define ADM_CH_RSLT_CONF(chan, ee) (0x300 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + ADM_EE_OFFS(ee))
+#define ADM_CI_CONF(ci) (0x390 + ci * ADM_CI_MULTI)
+#define ADM_GP_CTL 0x3d8
+#define ADM_CRCI_CTL(crci, ee) (0x400 + crci * ADM_CRCI_MULTI + \
+ ADM_EE_OFFS(ee))
+
+/* channel status */
+#define ADM_CH_STATUS_VALID BIT(1)
+
+/* channel result */
+#define ADM_CH_RSLT_VALID BIT(31)
+#define ADM_CH_RSLT_ERR BIT(3)
+#define ADM_CH_RSLT_FLUSH BIT(2)
+#define ADM_CH_RSLT_TPD BIT(1)
+
+/* channel conf */
+#define ADM_CH_CONF_SHADOW_EN BIT(12)
+#define ADM_CH_CONF_MPU_DISABLE BIT(11)
+#define ADM_CH_CONF_PERM_MPU_CONF BIT(9)
+#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7)
+#define ADM_CH_CONF_SEC_DOMAIN(ee) (((ee & 0x3) << 4) | ((ee & 0x4) << 11))
+
+/* channel result conf */
+#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1)
+#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0)
+
+/* CRCI CTL */
+#define ADM_CRCI_CTL_MUX_SEL BIT(18)
+#define ADM_CRCI_CTL_RST BIT(17)
+
+/* CI configuration */
+#define ADM_CI_RANGE_END(x) (x << 24)
+#define ADM_CI_RANGE_START(x) (x << 16)
+#define ADM_CI_BURST_4_WORDS BIT(2)
+#define ADM_CI_BURST_8_WORDS BIT(3)
+
+/* GP CTL */
+#define ADM_GP_CTL_LP_EN BIT(12)
+#define ADM_GP_CTL_LP_CNT(x) (x << 8)
+
+/* Command pointer list entry */
+#define ADM_CPLE_LP BIT(31)
+#define ADM_CPLE_CMD_PTR_LIST BIT(29)
+
+/* Command list entry */
+#define ADM_CMD_LC BIT(31)
+#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7)
+#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3)
+
+#define ADM_CMD_TYPE_SINGLE 0x0
+#define ADM_CMD_TYPE_BOX 0x3
+
+#define ADM_CRCI_MUX_SEL BIT(4)
+#define ADM_DESC_ALIGN 8
+#define ADM_MAX_XFER (SZ_64K-1)
+#define ADM_MAX_ROWS (SZ_64K-1)
+#define ADM_MAX_CHANNELS 16
+
+struct adm_desc_hw_box {
+ u32 cmd;
+ u32 src_addr;
+ u32 dst_addr;
+ u32 row_len;
+ u32 num_rows;
+ u32 row_offset;
+};
+
+struct adm_desc_hw_single {
+ u32 cmd;
+ u32 src_addr;
+ u32 dst_addr;
+ u32 len;
+};
+
+struct adm_async_desc {
+ struct virt_dma_desc vd;
+ struct adm_device *adev;
+
+ size_t length;
+ enum dma_transfer_direction dir;
+ dma_addr_t dma_addr;
+ size_t dma_len;
+
+ void *cpl;
+ dma_addr_t cp_addr;
+ u32 crci;
+ u32 mux;
+ u32 blk_size;
+};
+
+struct adm_chan {
+ struct virt_dma_chan vc;
+ struct adm_device *adev;
+
+ /* parsed from DT */
+ u32 id; /* channel id */
+
+ struct adm_async_desc *curr_txd;
+ struct dma_slave_config slave;
+ struct list_head node;
+
+ int error;
+ int initialized;
+};
+
+static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
+{
+ return container_of(common, struct adm_chan, vc.chan);
+}
+
+struct adm_device {
+ void __iomem *regs;
+ struct device *dev;
+ struct dma_device common;
+ struct device_dma_parameters dma_parms;
+ struct adm_chan *channels;
+
+ u32 ee;
+
+ struct clk *core_clk;
+ struct clk *iface_clk;
+
+ struct reset_control *clk_reset;
+ struct reset_control *c0_reset;
+ struct reset_control *c1_reset;
+ struct reset_control *c2_reset;
+ int irq;
+};
+
+/**
+ * adm_free_chan - Frees dma resources associated with the specific channel
+ *
+ * Free all allocated descriptors associated with this channel
+ *
+ */
+static void adm_free_chan(struct dma_chan *chan)
+{
+ /* free all queued descriptors */
+ vchan_free_chan_resources(to_virt_chan(chan));
+}
+
+/**
+ * adm_get_blksize - Get block size from burst value
+ *
+ */
+static int adm_get_blksize(unsigned int burst)
+{
+ int ret;
+
+ switch (burst) {
+ case 16:
+ case 32:
+ case 64:
+ case 128:
+ ret = ffs(burst>>4) - 1;
+ break;
+ case 192:
+ ret = 4;
+ break;
+ case 256:
+ ret = 5;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
+ *
+ * @achan: ADM channel
+ * @desc: Descriptor memory pointer
+ * @sg: Scatterlist entry
+ * @crci: CRCI value
+ * @burst: Burst size of transaction
+ * @direction: DMA transfer direction
+ */
+static void *adm_process_fc_descriptors(struct adm_chan *achan,
+ void *desc, struct scatterlist *sg, u32 crci, u32 burst,
+ enum dma_transfer_direction direction)
+{
+ struct adm_desc_hw_box *box_desc = NULL;
+ struct adm_desc_hw_single *single_desc;
+ u32 remainder = sg_dma_len(sg);
+ u32 rows, row_offset, crci_cmd;
+ u32 mem_addr = sg_dma_address(sg);
+ u32 *incr_addr = &mem_addr;
+ u32 *src, *dst;
+
+ if (direction == DMA_DEV_TO_MEM) {
+ crci_cmd = ADM_CMD_SRC_CRCI(crci);
+ row_offset = burst;
+ src = &achan->slave.src_addr;
+ dst = &mem_addr;
+ } else {
+ crci_cmd = ADM_CMD_DST_CRCI(crci);
+ row_offset = burst << 16;
+ src = &mem_addr;
+ dst = &achan->slave.dst_addr;
+ }
+
+ while (remainder >= burst) {
+ box_desc = desc;
+ box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd;
+ box_desc->row_offset = row_offset;
+ box_desc->src_addr = *src;
+ box_desc->dst_addr = *dst;
+
+ rows = remainder / burst;
+ rows = min_t(u32, rows, ADM_MAX_ROWS);
+ box_desc->num_rows = rows << 16 | rows;
+ box_desc->row_len = burst << 16 | burst;
+
+ *incr_addr += burst * rows;
+ remainder -= burst * rows;
+ desc += sizeof(*box_desc);
+ }
+
+ /* if leftover bytes, do one single descriptor */
+ if (remainder) {
+ single_desc = desc;
+ single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd;
+ single_desc->len = remainder;
+ single_desc->src_addr = *src;
+ single_desc->dst_addr = *dst;
+ desc += sizeof(*single_desc);
+
+ if (sg_is_last(sg))
+ single_desc->cmd |= ADM_CMD_LC;
+ } else {
+ if (box_desc && sg_is_last(sg))
+ box_desc->cmd |= ADM_CMD_LC;
+ }
+
+ return desc;
+}
+
+/**
+ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers
+ *
+ * @achan: ADM channel
+ * @desc: Descriptor memory pointer
+ * @sg: Scatterlist entry
+ * @direction: DMA transfer direction
+ */
+static void *adm_process_non_fc_descriptors(struct adm_chan *achan,
+ void *desc, struct scatterlist *sg,
+ enum dma_transfer_direction direction)
+{
+ struct adm_desc_hw_single *single_desc;
+ u32 remainder = sg_dma_len(sg);
+ u32 mem_addr = sg_dma_address(sg);
+ u32 *incr_addr = &mem_addr;
+ u32 *src, *dst;
+
+ if (direction == DMA_DEV_TO_MEM) {
+ src = &achan->slave.src_addr;
+ dst = &mem_addr;
+ } else {
+ src = &mem_addr;
+ dst = &achan->slave.dst_addr;
+ }
+
+ do {
+ single_desc = desc;
+ single_desc->cmd = ADM_CMD_TYPE_SINGLE;
+ single_desc->src_addr = *src;
+ single_desc->dst_addr = *dst;
+ single_desc->len = (remainder > ADM_MAX_XFER) ?
+ ADM_MAX_XFER : remainder;
+
+ remainder -= single_desc->len;
+ *incr_addr += single_desc->len;
+ desc += sizeof(*single_desc);
+ } while (remainder);
+
+ /* set last command if this is the end of the whole transaction */
+ if (sg_is_last(sg))
+ single_desc->cmd |= ADM_CMD_LC;
+
+ return desc;
+}
+
+/**
+ * adm_prep_slave_sg - Prep slave sg transaction
+ *
+ * @chan: dma channel
+ * @sgl: scatter gather list
+ * @sg_len: length of sg
+ * @direction: DMA transfer direction
+ * @flags: DMA flags
+ * @context: transfer context (unused)
+ */
+static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
+ struct scatterlist *sgl, unsigned int sg_len,
+ enum dma_transfer_direction direction, unsigned long flags,
+ void *context)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct adm_device *adev = achan->adev;
+ struct adm_async_desc *async_desc;
+ struct scatterlist *sg;
+ u32 i, burst;
+ u32 single_count = 0, box_count = 0, crci = 0;
+ void *desc;
+ u32 *cple;
+ int blk_size = 0;
+
+ if (!is_slave_direction(direction)) {
+ dev_err(adev->dev, "invalid dma direction\n");
+ return NULL;
+ }
+
+ /*
+ * get burst value from slave configuration
+ */
+ burst = (direction == DMA_MEM_TO_DEV) ?
+ achan->slave.dst_maxburst :
+ achan->slave.src_maxburst;
+
+ /* if using flow control, validate burst and crci values */
+ if (achan->slave.device_fc) {
+
+ blk_size = adm_get_blksize(burst);
+ if (blk_size < 0) {
+ dev_err(adev->dev, "invalid burst value: %d\n",
+ burst);
+ return ERR_PTR(-EINVAL);
+ }
+
+ crci = achan->slave.slave_id & 0xf;
+ if (!crci || achan->slave.slave_id > 0x1f) {
+ dev_err(adev->dev, "invalid crci value\n");
+ return ERR_PTR(-EINVAL);
+ }
+ }
+
+ /* iterate through sgs and compute allocation size of structures */
+ for_each_sg(sgl, sg, sg_len, i) {
+ if (achan->slave.device_fc) {
+ box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,
+ ADM_MAX_ROWS);
+ if (sg_dma_len(sg) % burst)
+ single_count++;
+ } else {
+ single_count += DIV_ROUND_UP(sg_dma_len(sg),
+ ADM_MAX_XFER);
+ }
+ }
+
+ async_desc = kzalloc(sizeof(*async_desc), GFP_NOWAIT);
+ if (!async_desc)
+ return ERR_PTR(-ENOMEM);
+
+ if (crci)
+ async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
+ ADM_CRCI_CTL_MUX_SEL : 0;
+ async_desc->crci = crci;
+ async_desc->blk_size = blk_size;
+ async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
+ box_count * sizeof(struct adm_desc_hw_box) +
+ sizeof(*cple) + 2 * ADM_DESC_ALIGN;
+
+ async_desc->cpl = dma_alloc_writecombine(adev->dev, async_desc->dma_len,
+ &async_desc->dma_addr, GFP_NOWAIT);
+
+ if (!async_desc->cpl) {
+ kfree(async_desc);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ async_desc->adev = adev;
+
+ /* both command list entry and descriptors must be 8 byte aligned */
+ cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
+ desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN);
+
+ /* init cmd list */
+ *cple = ADM_CPLE_LP;
+ *cple |= (desc - async_desc->cpl + async_desc->dma_addr) >> 3;
+
+ for_each_sg(sgl, sg, sg_len, i) {
+ async_desc->length += sg_dma_len(sg);
+
+ if (achan->slave.device_fc)
+ desc = adm_process_fc_descriptors(achan, desc, sg, crci,
+ burst, direction);
+ else
+ desc = adm_process_non_fc_descriptors(achan, desc, sg,
+ direction);
+ }
+
+ return vchan_tx_prep(&achan->vc, &async_desc->vd, flags);
+}
+
+/**
+ * adm_terminate_all - terminate all transactions on a channel
+ * @achan: adm dma channel
+ *
+ * Dequeues and frees all transactions, aborts current transaction
+ * No callbacks are done
+ *
+ */
+static int adm_terminate_all(struct dma_chan *chan)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct adm_device *adev = achan->adev;
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+ vchan_get_all_descriptors(&achan->vc, &head);
+
+ /* send flush command to terminate current transaction */
+ writel_relaxed(0x0,
+ adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee));
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+
+ vchan_dma_desc_free_list(&achan->vc, &head);
+
+ return 0;
+}
+
+static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ unsigned long flag;
+
+ spin_lock_irqsave(&achan->vc.lock, flag);
+ memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
+ spin_unlock_irqrestore(&achan->vc.lock, flag);
+
+ return 0;
+}
+
+/**
+ * adm_start_dma - start next transaction
+ * @achan - ADM dma channel
+ */
+static void adm_start_dma(struct adm_chan *achan)
+{
+ struct virt_dma_desc *vd = vchan_next_desc(&achan->vc);
+ struct adm_device *adev = achan->adev;
+ struct adm_async_desc *async_desc;
+
+ lockdep_assert_held(&achan->vc.lock);
+
+ if (!vd)
+ return;
+
+ list_del(&vd->node);
+
+ /* write next command list out to the CMD FIFO */
+ async_desc = container_of(vd, struct adm_async_desc, vd);
+ achan->curr_txd = async_desc;
+
+ /* reset channel error */
+ achan->error = 0;
+
+ if (!achan->initialized) {
+ /* enable interrupts */
+ writel(ADM_CH_CONF_SHADOW_EN |
+ ADM_CH_CONF_PERM_MPU_CONF |
+ ADM_CH_CONF_MPU_DISABLE |
+ ADM_CH_CONF_SEC_DOMAIN(adev->ee),
+ adev->regs + ADM_CH_CONF(achan->id));
+
+ writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN,
+ adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
+
+ achan->initialized = 1;
+ }
+
+ /* set the crci block size if this transaction requires CRCI */
+ if (async_desc->crci) {
+ writel(async_desc->mux | async_desc->blk_size,
+ adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee));
+ }
+
+ /* make sure IRQ enable doesn't get reordered */
+ wmb();
+
+ /* write next command list out to the CMD FIFO */
+ writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3,
+ adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee));
+}
+
+/**
+ * adm_dma_irq - irq handler for ADM controller
+ * @irq: IRQ of interrupt
+ * @data: callback data
+ *
+ * IRQ handler for the bam controller
+ */
+static irqreturn_t adm_dma_irq(int irq, void *data)
+{
+ struct adm_device *adev = data;
+ u32 srcs, i;
+ struct adm_async_desc *async_desc;
+ unsigned long flags;
+
+ srcs = readl_relaxed(adev->regs +
+ ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee));
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
+ struct adm_chan *achan = &adev->channels[i];
+ u32 status, result;
+
+ if (srcs & BIT(i)) {
+ status = readl_relaxed(adev->regs +
+ ADM_CH_STATUS_SD(i, adev->ee));
+
+ /* if no result present, skip */
+ if (!(status & ADM_CH_STATUS_VALID))
+ continue;
+
+ result = readl_relaxed(adev->regs +
+ ADM_CH_RSLT(i, adev->ee));
+
+ /* no valid results, skip */
+ if (!(result & ADM_CH_RSLT_VALID))
+ continue;
+
+ /* flag error if transaction was flushed or failed */
+ if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH))
+ achan->error = 1;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+ async_desc = achan->curr_txd;
+
+ achan->curr_txd = NULL;
+
+ if (async_desc) {
+ vchan_cookie_complete(&async_desc->vd);
+
+ /* kick off next DMA */
+ adm_start_dma(achan);
+ }
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * adm_tx_status - returns status of transaction
+ * @chan: dma channel
+ * @cookie: transaction cookie
+ * @txstate: DMA transaction state
+ *
+ * Return status of dma transaction
+ */
+static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct virt_dma_desc *vd;
+ enum dma_status ret;
+ unsigned long flags;
+ size_t residue = 0;
+
+ ret = dma_cookie_status(chan, cookie, txstate);
+ if (ret == DMA_COMPLETE || !txstate)
+ return ret;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+
+ vd = vchan_find_desc(&achan->vc, cookie);
+ if (vd)
+ residue = container_of(vd, struct adm_async_desc, vd)->length;
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+
+ /*
+ * residue is either the full length if it is in the issued list, or 0
+ * if it is in progress. We have no reliable way of determining
+ * anything inbetween
+ */
+ dma_set_residue(txstate, residue);
+
+ if (achan->error)
+ return DMA_ERROR;
+
+ return ret;
+}
+
+/**
+ * adm_issue_pending - starts pending transactions
+ * @chan: dma channel
+ *
+ * Issues all pending transactions and starts DMA
+ */
+static void adm_issue_pending(struct dma_chan *chan)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+
+ if (vchan_issue_pending(&achan->vc) && !achan->curr_txd)
+ adm_start_dma(achan);
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+}
+
+/**
+ * adm_dma_free_desc - free descriptor memory
+ * @vd: virtual descriptor
+ *
+ */
+static void adm_dma_free_desc(struct virt_dma_desc *vd)
+{
+ struct adm_async_desc *async_desc = container_of(vd,
+ struct adm_async_desc, vd);
+
+ dma_free_writecombine(async_desc->adev->dev, async_desc->dma_len,
+ async_desc->cpl, async_desc->dma_addr);
+ kfree(async_desc);
+}
+
+static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
+ u32 index)
+{
+ achan->id = index;
+ achan->adev = adev;
+
+ vchan_init(&achan->vc, &adev->common);
+ achan->vc.desc_free = adm_dma_free_desc;
+}
+
+static int adm_dma_probe(struct platform_device *pdev)
+{
+ struct adm_device *adev;
+ struct resource *iores;
+ int ret;
+ u32 i;
+
+ adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
+ if (!adev)
+ return -ENOMEM;
+
+ adev->dev = &pdev->dev;
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ adev->regs = devm_ioremap_resource(&pdev->dev, iores);
+ if (IS_ERR(adev->regs))
+ return PTR_ERR(adev->regs);
+
+ adev->irq = platform_get_irq(pdev, 0);
+ if (adev->irq < 0)
+ return adev->irq;
+
+ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
+ if (ret) {
+ dev_err(adev->dev, "Execution environment unspecified\n");
+ return ret;
+ }
+
+ adev->core_clk = devm_clk_get(adev->dev, "core");
+ if (IS_ERR(adev->core_clk))
+ return PTR_ERR(adev->core_clk);
+
+ ret = clk_prepare_enable(adev->core_clk);
+ if (ret) {
+ dev_err(adev->dev, "failed to prepare/enable core clock\n");
+ return ret;
+ }
+
+ adev->iface_clk = devm_clk_get(adev->dev, "iface");
+ if (IS_ERR(adev->iface_clk)) {
+ ret = PTR_ERR(adev->iface_clk);
+ goto err_disable_core_clk;
+ }
+
+ ret = clk_prepare_enable(adev->iface_clk);
+ if (ret) {
+ dev_err(adev->dev, "failed to prepare/enable iface clock\n");
+ goto err_disable_core_clk;
+ }
+
+ adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk");
+ if (IS_ERR(adev->clk_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 reset\n");
+ ret = PTR_ERR(adev->clk_reset);
+ goto err_disable_clks;
+ }
+
+ adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0");
+ if (IS_ERR(adev->c0_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
+ ret = PTR_ERR(adev->c0_reset);
+ goto err_disable_clks;
+ }
+
+ adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1");
+ if (IS_ERR(adev->c1_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
+ ret = PTR_ERR(adev->c1_reset);
+ goto err_disable_clks;
+ }
+
+ adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2");
+ if (IS_ERR(adev->c2_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
+ ret = PTR_ERR(adev->c2_reset);
+ goto err_disable_clks;
+ }
+
+ reset_control_assert(adev->clk_reset);
+ reset_control_assert(adev->c0_reset);
+ reset_control_assert(adev->c1_reset);
+ reset_control_assert(adev->c2_reset);
+
+ reset_control_deassert(adev->clk_reset);
+ reset_control_deassert(adev->c0_reset);
+ reset_control_deassert(adev->c1_reset);
+ reset_control_deassert(adev->c2_reset);
+
+ adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS,
+ sizeof(*adev->channels), GFP_KERNEL);
+
+ if (!adev->channels) {
+ ret = -ENOMEM;
+ goto err_disable_clks;
+ }
+
+ /* allocate and initialize channels */
+ INIT_LIST_HEAD(&adev->common.channels);
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++)
+ adm_channel_init(adev, &adev->channels[i], i);
+
+ /* reset CRCIs */
+ for (i = 0; i < 16; i++)
+ writel(ADM_CRCI_CTL_RST, adev->regs +
+ ADM_CRCI_CTL(i, adev->ee));
+
+ /* configure client interfaces */
+ writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0));
+ writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1));
+ writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2));
+ writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf),
+ adev->regs + ADM_GP_CTL);
+
+ ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq,
+ 0, "adm_dma", adev);
+ if (ret)
+ goto err_disable_clks;
+
+ platform_set_drvdata(pdev, adev);
+
+ adev->common.dev = adev->dev;
+ adev->common.dev->dma_parms = &adev->dma_parms;
+
+ /* set capabilities */
+ dma_cap_zero(adev->common.cap_mask);
+ dma_cap_set(DMA_SLAVE, adev->common.cap_mask);
+ dma_cap_set(DMA_PRIVATE, adev->common.cap_mask);
+
+ /* initialize dmaengine apis */
+ adev->common.device_free_chan_resources = adm_free_chan;
+ adev->common.device_prep_slave_sg = adm_prep_slave_sg;
+ adev->common.device_issue_pending = adm_issue_pending;
+ adev->common.device_tx_status = adm_tx_status;
+ adev->common.device_terminate_all = adm_terminate_all;
+ adev->common.device_config = adm_slave_config;
+
+ ret = dma_async_device_register(&adev->common);
+ if (ret) {
+ dev_err(adev->dev, "failed to register dma async device\n");
+ goto err_disable_clks;
+ }
+
+ ret = of_dma_controller_register(pdev->dev.of_node,
+ of_dma_xlate_by_chan_id,
+ &adev->common);
+ if (ret)
+ goto err_unregister_dma;
+
+ return 0;
+
+err_unregister_dma:
+ dma_async_device_unregister(&adev->common);
+err_disable_clks:
+ clk_disable_unprepare(adev->iface_clk);
+err_disable_core_clk:
+ clk_disable_unprepare(adev->core_clk);
+
+ return ret;
+}
+
+static int adm_dma_remove(struct platform_device *pdev)
+{
+ struct adm_device *adev = platform_get_drvdata(pdev);
+ struct adm_chan *achan;
+ u32 i;
+
+ of_dma_controller_free(pdev->dev.of_node);
+ dma_async_device_unregister(&adev->common);
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
+ achan = &adev->channels[i];
+
+ /* mask IRQs for this channel/EE pair */
+ writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
+
+ adm_terminate_all(&adev->channels[i].vc.chan);
+ }
+
+ devm_free_irq(adev->dev, adev->irq, adev);
+
+ clk_disable_unprepare(adev->core_clk);
+ clk_disable_unprepare(adev->iface_clk);
+
+ return 0;
+}
+
+static const struct of_device_id adm_of_match[] = {
+ { .compatible = "qcom,adm", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, adm_of_match);
+
+static struct platform_driver adm_dma_driver = {
+ .probe = adm_dma_probe,
+ .remove = adm_dma_remove,
+ .driver = {
+ .name = "adm-dma-engine",
+ .of_match_table = adm_of_match,
+ },
+};
+
+module_platform_driver(adm_dma_driver);
+
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -49,3 +49,4 @@ obj-y += xilinx/
obj-$(CONFIG_INTEL_MIC_X100_DMA) += mic_x100_dma.o
obj-$(CONFIG_NBPFAXI_DMA) += nbpfaxi.o
obj-$(CONFIG_DMA_SUN6I) += sun6i-dma.o
+obj-$(CONFIG_QCOM_ADM) += qcom_adm.o

54
target/linux/ipq806x/patches-3.18/157-ARM-DT-ipq8064-Add-ADM-device-node.patch Normal file
View File

@ -0,0 +1,54 @@
From 1fb18acab2d71e7e4efd9c10492edb1baf84dcc0 Mon Sep 17 00:00:00 2001
From: Andy Gross <agross@codeaurora.org>
Date: Wed, 20 May 2015 15:41:07 +0530
Subject: [PATCH] ARM: DT: ipq8064: Add ADM device node
This patch adds support for the ADM DMA on the IPQ8064 SOC
Signed-off-by: Andy Gross <agross@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 4 ++++
arch/arm/boot/dts/qcom-ipq8064.dtsi | 21 +++++++++++++++++++++
2 files changed, 25 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -90,6 +90,10 @@
cs-gpios = <&qcom_pinmux 20 0>;
+ dmas = <&adm_dma 6>,
+ <&adm_dma 5>;
+ dma-names = "rx", "tx";
+
flash: m25p80@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -657,5 +657,25 @@
};
};
+ adm_dma: dma@18300000 {
+ compatible = "qcom,adm";
+ reg = <0x18300000 0x100000>;
+ interrupts = <0 170 0>;
+ #dma-cells = <1>;
+
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc ADM0_RESET>,
+ <&gcc ADM0_PBUS_RESET>,
+ <&gcc ADM0_C0_RESET>,
+ <&gcc ADM0_C1_RESET>,
+ <&gcc ADM0_C2_RESET>;
+ reset-names = "clk", "pbus", "c0", "c1", "c2";
+ qcom,ee = <0>;
+
+ status = "disabled";
+ };
+
};
};

2
target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
View File

@ -38,7 +38,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
};
gsbi@16300000 {
@@ -170,5 +180,33 @@
@@ -174,5 +184,33 @@
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
};

7
target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
View File

@ -29,7 +29,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
};
gsbi@16300000 {
@@ -208,5 +218,26 @@
@@ -212,5 +222,26 @@
reg = <4>;
};
};
@ -116,8 +116,8 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
};
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -657,5 +657,90 @@
};
@@ -677,5 +677,91 @@
status = "disabled";
};
+ nss_common: syscon@03000000 {
@ -205,5 +205,6 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+
+ status = "disabled";
+ };
+
};
};

76
target/linux/ipq806x/patches-4.1/155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch Normal file
View File

@ -0,0 +1,76 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v6,1/2] dt/bindings: qcom_adm: Fix channel specifiers
From: Andy Gross <agross@codeaurora.org>
X-Patchwork-Id: 6027361
Message-Id: <1426571172-9711-2-git-send-email-agross@codeaurora.org>
To: Vinod Koul <vinod.koul@intel.com>
Cc: devicetree@vger.kernel.org, dmaengine@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, Kumar Gala <galak@codeaurora.org>,
Bjorn Andersson <bjorn.andersson@sonymobile.com>,
Andy Gross <agross@codeaurora.org>
Date: Tue, 17 Mar 2015 00:46:11 -0500
This patch removes the crci information from the dma channel property. At least
one client device requires using more than one CRCI value for a channel. This
does not match the current binding and the crci information needs to be removed.
Instead, the client device will provide this information via other means.
Signed-off-by: Andy Gross <agross@codeaurora.org>
---
Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
+++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
@@ -4,8 +4,7 @@ Required properties:
- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
- reg: Address range for DMA registers
- interrupts: Should contain one interrupt shared by all channels
-- #dma-cells: must be <2>. First cell denotes the channel number. Second cell
- denotes CRCI (client rate control interface) flow control assignment.
+- #dma-cells: must be <1>. First cell denotes the channel number.
- clocks: Should contain the core clock and interface clock.
- clock-names: Must contain "core" for the core clock and "iface" for the
interface clock.
@@ -22,7 +21,7 @@ Example:
compatible = "qcom,adm";
reg = <0x18300000 0x100000>;
interrupts = <0 170 0>;
- #dma-cells = <2>;
+ #dma-cells = <1>;
clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
clock-names = "core", "iface";
@@ -35,15 +34,12 @@ Example:
qcom,ee = <0>;
};
-DMA clients must use the format descripted in the dma.txt file, using a three
+DMA clients must use the format descripted in the dma.txt file, using a two
cell specifier for each channel.
-Each dmas request consists of 3 cells:
+Each dmas request consists of two cells:
1. phandle pointing to the DMA controller
2. channel number
- 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0.
- The CRCI is used for flow control. It identifies the peripheral device that
- is the source/destination for the transferred data.
Example:
@@ -56,7 +52,7 @@ Example:
cs-gpios = <&qcom_pinmux 20 0>;
- dmas = <&adm_dma 6 9>,
- <&adm_dma 5 10>;
+ dmas = <&adm_dma 6>,
+ <&adm_dma 5>;
dma-names = "rx", "tx";
};

962
target/linux/ipq806x/patches-4.1/156-dmaengine-Add-ADM-driver.patch Normal file
View File

@ -0,0 +1,962 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v6,2/2] dmaengine: Add ADM driver
From: Andy Gross <agross@codeaurora.org>
X-Patchwork-Id: 6027351
Message-Id: <1426571172-9711-3-git-send-email-agross@codeaurora.org>
To: Vinod Koul <vinod.koul@intel.com>
Cc: devicetree@vger.kernel.org, dmaengine@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, Kumar Gala <galak@codeaurora.org>,
Bjorn Andersson <bjorn.andersson@sonymobile.com>,
Andy Gross <agross@codeaurora.org>
Date: Tue, 17 Mar 2015 00:46:12 -0500
Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
controller found in the MSM8x60 and IPQ/APQ8064 platforms.
The ADM supports both memory to memory transactions and memory
to/from peripheral device transactions. The controller also provides flow
control capabilities for transactions to/from peripheral devices.
The initial release of this driver supports slave transfers to/from peripherals
and also incorporates CRCI (client rate control interface) flow control.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Reviewed-by: sricharan <sricharan@codeaurora.org>
---
drivers/dma/Kconfig | 10 +
drivers/dma/Makefile | 1 +
drivers/dma/qcom_adm.c | 900 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 911 insertions(+)
create mode 100644 drivers/dma/qcom_adm.c
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -492,4 +492,14 @@ config QCOM_BAM_DMA
Enable support for the QCOM BAM DMA controller. This controller
provides DMA capabilities for a variety of on-chip devices.
+config QCOM_ADM
+ tristate "Qualcomm ADM support"
+ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+ ---help---
+ Enable support for the Qualcomm ADM DMA controller. This controller
+ provides DMA capabilities for both general purpose and on-chip
+ peripheral devices.
+
endif
--- /dev/null
+++ b/drivers/dma/qcom_adm.c
@@ -0,0 +1,900 @@
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_dma.h>
+#include <linux/reset.h>
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+
+#include "dmaengine.h"
+#include "virt-dma.h"
+
+/* ADM registers - calculated from channel number and security domain */
+#define ADM_CHAN_MULTI 0x4
+#define ADM_CI_MULTI 0x4
+#define ADM_CRCI_MULTI 0x4
+#define ADM_EE_MULTI 0x800
+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
+#define ADM_EE_OFFS(ee) (ADM_EE_MULTI * ee)
+#define ADM_CHAN_EE_OFFS(chan, ee) (ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee))
+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
+#define ADM_CI_OFFS(ci) (ADM_CHAN_OFF(ci))
+#define ADM_CH_CMD_PTR(chan, ee) (ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_RSLT(chan, ee) (0x40 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_FLUSH_STATE0(chan, ee) (0x80 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_STATUS_SD(chan, ee) (0x200 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_CONF(chan) (0x240 + ADM_CHAN_OFFS(chan))
+#define ADM_CH_RSLT_CONF(chan, ee) (0x300 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + ADM_EE_OFFS(ee))
+#define ADM_CI_CONF(ci) (0x390 + ci * ADM_CI_MULTI)
+#define ADM_GP_CTL 0x3d8
+#define ADM_CRCI_CTL(crci, ee) (0x400 + crci * ADM_CRCI_MULTI + \
+ ADM_EE_OFFS(ee))
+
+/* channel status */
+#define ADM_CH_STATUS_VALID BIT(1)
+
+/* channel result */
+#define ADM_CH_RSLT_VALID BIT(31)
+#define ADM_CH_RSLT_ERR BIT(3)
+#define ADM_CH_RSLT_FLUSH BIT(2)
+#define ADM_CH_RSLT_TPD BIT(1)
+
+/* channel conf */
+#define ADM_CH_CONF_SHADOW_EN BIT(12)
+#define ADM_CH_CONF_MPU_DISABLE BIT(11)
+#define ADM_CH_CONF_PERM_MPU_CONF BIT(9)
+#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7)
+#define ADM_CH_CONF_SEC_DOMAIN(ee) (((ee & 0x3) << 4) | ((ee & 0x4) << 11))
+
+/* channel result conf */
+#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1)
+#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0)
+
+/* CRCI CTL */
+#define ADM_CRCI_CTL_MUX_SEL BIT(18)
+#define ADM_CRCI_CTL_RST BIT(17)
+
+/* CI configuration */
+#define ADM_CI_RANGE_END(x) (x << 24)
+#define ADM_CI_RANGE_START(x) (x << 16)
+#define ADM_CI_BURST_4_WORDS BIT(2)
+#define ADM_CI_BURST_8_WORDS BIT(3)
+
+/* GP CTL */
+#define ADM_GP_CTL_LP_EN BIT(12)
+#define ADM_GP_CTL_LP_CNT(x) (x << 8)
+
+/* Command pointer list entry */
+#define ADM_CPLE_LP BIT(31)
+#define ADM_CPLE_CMD_PTR_LIST BIT(29)
+
+/* Command list entry */
+#define ADM_CMD_LC BIT(31)
+#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7)
+#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3)
+
+#define ADM_CMD_TYPE_SINGLE 0x0
+#define ADM_CMD_TYPE_BOX 0x3
+
+#define ADM_CRCI_MUX_SEL BIT(4)
+#define ADM_DESC_ALIGN 8
+#define ADM_MAX_XFER (SZ_64K-1)
+#define ADM_MAX_ROWS (SZ_64K-1)
+#define ADM_MAX_CHANNELS 16
+
+struct adm_desc_hw_box {
+ u32 cmd;
+ u32 src_addr;
+ u32 dst_addr;
+ u32 row_len;
+ u32 num_rows;
+ u32 row_offset;
+};
+
+struct adm_desc_hw_single {
+ u32 cmd;
+ u32 src_addr;
+ u32 dst_addr;
+ u32 len;
+};
+
+struct adm_async_desc {
+ struct virt_dma_desc vd;
+ struct adm_device *adev;
+
+ size_t length;
+ enum dma_transfer_direction dir;
+ dma_addr_t dma_addr;
+ size_t dma_len;
+
+ void *cpl;
+ dma_addr_t cp_addr;
+ u32 crci;
+ u32 mux;
+ u32 blk_size;
+};
+
+struct adm_chan {
+ struct virt_dma_chan vc;
+ struct adm_device *adev;
+
+ /* parsed from DT */
+ u32 id; /* channel id */
+
+ struct adm_async_desc *curr_txd;
+ struct dma_slave_config slave;
+ struct list_head node;
+
+ int error;
+ int initialized;
+};
+
+static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
+{
+ return container_of(common, struct adm_chan, vc.chan);
+}
+
+struct adm_device {
+ void __iomem *regs;
+ struct device *dev;
+ struct dma_device common;
+ struct device_dma_parameters dma_parms;
+ struct adm_chan *channels;
+
+ u32 ee;
+
+ struct clk *core_clk;
+ struct clk *iface_clk;
+
+ struct reset_control *clk_reset;
+ struct reset_control *c0_reset;
+ struct reset_control *c1_reset;
+ struct reset_control *c2_reset;
+ int irq;
+};
+
+/**
+ * adm_free_chan - Frees dma resources associated with the specific channel
+ *
+ * Free all allocated descriptors associated with this channel
+ *
+ */
+static void adm_free_chan(struct dma_chan *chan)
+{
+ /* free all queued descriptors */
+ vchan_free_chan_resources(to_virt_chan(chan));
+}
+
+/**
+ * adm_get_blksize - Get block size from burst value
+ *
+ */
+static int adm_get_blksize(unsigned int burst)
+{
+ int ret;
+
+ switch (burst) {
+ case 16:
+ case 32:
+ case 64:
+ case 128:
+ ret = ffs(burst>>4) - 1;
+ break;
+ case 192:
+ ret = 4;
+ break;
+ case 256:
+ ret = 5;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
+ *
+ * @achan: ADM channel
+ * @desc: Descriptor memory pointer
+ * @sg: Scatterlist entry
+ * @crci: CRCI value
+ * @burst: Burst size of transaction
+ * @direction: DMA transfer direction
+ */
+static void *adm_process_fc_descriptors(struct adm_chan *achan,
+ void *desc, struct scatterlist *sg, u32 crci, u32 burst,
+ enum dma_transfer_direction direction)
+{
+ struct adm_desc_hw_box *box_desc = NULL;
+ struct adm_desc_hw_single *single_desc;
+ u32 remainder = sg_dma_len(sg);
+ u32 rows, row_offset, crci_cmd;
+ u32 mem_addr = sg_dma_address(sg);
+ u32 *incr_addr = &mem_addr;
+ u32 *src, *dst;
+
+ if (direction == DMA_DEV_TO_MEM) {
+ crci_cmd = ADM_CMD_SRC_CRCI(crci);
+ row_offset = burst;
+ src = &achan->slave.src_addr;
+ dst = &mem_addr;
+ } else {
+ crci_cmd = ADM_CMD_DST_CRCI(crci);
+ row_offset = burst << 16;
+ src = &mem_addr;
+ dst = &achan->slave.dst_addr;
+ }
+
+ while (remainder >= burst) {
+ box_desc = desc;
+ box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd;
+ box_desc->row_offset = row_offset;
+ box_desc->src_addr = *src;
+ box_desc->dst_addr = *dst;
+
+ rows = remainder / burst;
+ rows = min_t(u32, rows, ADM_MAX_ROWS);
+ box_desc->num_rows = rows << 16 | rows;
+ box_desc->row_len = burst << 16 | burst;
+
+ *incr_addr += burst * rows;
+ remainder -= burst * rows;
+ desc += sizeof(*box_desc);
+ }
+
+ /* if leftover bytes, do one single descriptor */
+ if (remainder) {
+ single_desc = desc;
+ single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd;
+ single_desc->len = remainder;
+ single_desc->src_addr = *src;
+ single_desc->dst_addr = *dst;
+ desc += sizeof(*single_desc);
+
+ if (sg_is_last(sg))
+ single_desc->cmd |= ADM_CMD_LC;
+ } else {
+ if (box_desc && sg_is_last(sg))
+ box_desc->cmd |= ADM_CMD_LC;
+ }
+
+ return desc;
+}
+
+/**
+ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers
+ *
+ * @achan: ADM channel
+ * @desc: Descriptor memory pointer
+ * @sg: Scatterlist entry
+ * @direction: DMA transfer direction
+ */
+static void *adm_process_non_fc_descriptors(struct adm_chan *achan,
+ void *desc, struct scatterlist *sg,
+ enum dma_transfer_direction direction)
+{
+ struct adm_desc_hw_single *single_desc;
+ u32 remainder = sg_dma_len(sg);
+ u32 mem_addr = sg_dma_address(sg);
+ u32 *incr_addr = &mem_addr;
+ u32 *src, *dst;
+
+ if (direction == DMA_DEV_TO_MEM) {
+ src = &achan->slave.src_addr;
+ dst = &mem_addr;
+ } else {
+ src = &mem_addr;
+ dst = &achan->slave.dst_addr;
+ }
+
+ do {
+ single_desc = desc;
+ single_desc->cmd = ADM_CMD_TYPE_SINGLE;
+ single_desc->src_addr = *src;
+ single_desc->dst_addr = *dst;
+ single_desc->len = (remainder > ADM_MAX_XFER) ?
+ ADM_MAX_XFER : remainder;
+
+ remainder -= single_desc->len;
+ *incr_addr += single_desc->len;
+ desc += sizeof(*single_desc);
+ } while (remainder);
+
+ /* set last command if this is the end of the whole transaction */
+ if (sg_is_last(sg))
+ single_desc->cmd |= ADM_CMD_LC;
+
+ return desc;
+}
+
+/**
+ * adm_prep_slave_sg - Prep slave sg transaction
+ *
+ * @chan: dma channel
+ * @sgl: scatter gather list
+ * @sg_len: length of sg
+ * @direction: DMA transfer direction
+ * @flags: DMA flags
+ * @context: transfer context (unused)
+ */
+static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
+ struct scatterlist *sgl, unsigned int sg_len,
+ enum dma_transfer_direction direction, unsigned long flags,
+ void *context)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct adm_device *adev = achan->adev;
+ struct adm_async_desc *async_desc;
+ struct scatterlist *sg;
+ u32 i, burst;
+ u32 single_count = 0, box_count = 0, crci = 0;
+ void *desc;
+ u32 *cple;
+ int blk_size = 0;
+
+ if (!is_slave_direction(direction)) {
+ dev_err(adev->dev, "invalid dma direction\n");
+ return NULL;
+ }
+
+ /*
+ * get burst value from slave configuration
+ */
+ burst = (direction == DMA_MEM_TO_DEV) ?
+ achan->slave.dst_maxburst :
+ achan->slave.src_maxburst;
+
+ /* if using flow control, validate burst and crci values */
+ if (achan->slave.device_fc) {
+
+ blk_size = adm_get_blksize(burst);
+ if (blk_size < 0) {
+ dev_err(adev->dev, "invalid burst value: %d\n",
+ burst);
+ return ERR_PTR(-EINVAL);
+ }
+
+ crci = achan->slave.slave_id & 0xf;
+ if (!crci || achan->slave.slave_id > 0x1f) {
+ dev_err(adev->dev, "invalid crci value\n");
+ return ERR_PTR(-EINVAL);
+ }
+ }
+
+ /* iterate through sgs and compute allocation size of structures */
+ for_each_sg(sgl, sg, sg_len, i) {
+ if (achan->slave.device_fc) {
+ box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,
+ ADM_MAX_ROWS);
+ if (sg_dma_len(sg) % burst)
+ single_count++;
+ } else {
+ single_count += DIV_ROUND_UP(sg_dma_len(sg),
+ ADM_MAX_XFER);
+ }
+ }
+
+ async_desc = kzalloc(sizeof(*async_desc), GFP_NOWAIT);
+ if (!async_desc)
+ return ERR_PTR(-ENOMEM);
+
+ if (crci)
+ async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
+ ADM_CRCI_CTL_MUX_SEL : 0;
+ async_desc->crci = crci;
+ async_desc->blk_size = blk_size;
+ async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
+ box_count * sizeof(struct adm_desc_hw_box) +
+ sizeof(*cple) + 2 * ADM_DESC_ALIGN;
+
+ async_desc->cpl = dma_alloc_writecombine(adev->dev, async_desc->dma_len,
+ &async_desc->dma_addr, GFP_NOWAIT);
+
+ if (!async_desc->cpl) {
+ kfree(async_desc);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ async_desc->adev = adev;
+
+ /* both command list entry and descriptors must be 8 byte aligned */
+ cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
+ desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN);
+
+ /* init cmd list */
+ *cple = ADM_CPLE_LP;
+ *cple |= (desc - async_desc->cpl + async_desc->dma_addr) >> 3;
+
+ for_each_sg(sgl, sg, sg_len, i) {
+ async_desc->length += sg_dma_len(sg);
+
+ if (achan->slave.device_fc)
+ desc = adm_process_fc_descriptors(achan, desc, sg, crci,
+ burst, direction);
+ else
+ desc = adm_process_non_fc_descriptors(achan, desc, sg,
+ direction);
+ }
+
+ return vchan_tx_prep(&achan->vc, &async_desc->vd, flags);
+}
+
+/**
+ * adm_terminate_all - terminate all transactions on a channel
+ * @achan: adm dma channel
+ *
+ * Dequeues and frees all transactions, aborts current transaction
+ * No callbacks are done
+ *
+ */
+static int adm_terminate_all(struct dma_chan *chan)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct adm_device *adev = achan->adev;
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+ vchan_get_all_descriptors(&achan->vc, &head);
+
+ /* send flush command to terminate current transaction */
+ writel_relaxed(0x0,
+ adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee));
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+
+ vchan_dma_desc_free_list(&achan->vc, &head);
+
+ return 0;
+}
+
+static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ unsigned long flag;
+
+ spin_lock_irqsave(&achan->vc.lock, flag);
+ memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
+ spin_unlock_irqrestore(&achan->vc.lock, flag);
+
+ return 0;
+}
+
+/**
+ * adm_start_dma - start next transaction
+ * @achan - ADM dma channel
+ */
+static void adm_start_dma(struct adm_chan *achan)
+{
+ struct virt_dma_desc *vd = vchan_next_desc(&achan->vc);
+ struct adm_device *adev = achan->adev;
+ struct adm_async_desc *async_desc;
+
+ lockdep_assert_held(&achan->vc.lock);
+
+ if (!vd)
+ return;
+
+ list_del(&vd->node);
+
+ /* write next command list out to the CMD FIFO */
+ async_desc = container_of(vd, struct adm_async_desc, vd);
+ achan->curr_txd = async_desc;
+
+ /* reset channel error */
+ achan->error = 0;
+
+ if (!achan->initialized) {
+ /* enable interrupts */
+ writel(ADM_CH_CONF_SHADOW_EN |
+ ADM_CH_CONF_PERM_MPU_CONF |
+ ADM_CH_CONF_MPU_DISABLE |
+ ADM_CH_CONF_SEC_DOMAIN(adev->ee),
+ adev->regs + ADM_CH_CONF(achan->id));
+
+ writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN,
+ adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
+
+ achan->initialized = 1;
+ }
+
+ /* set the crci block size if this transaction requires CRCI */
+ if (async_desc->crci) {
+ writel(async_desc->mux | async_desc->blk_size,
+ adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee));
+ }
+
+ /* make sure IRQ enable doesn't get reordered */
+ wmb();
+
+ /* write next command list out to the CMD FIFO */
+ writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3,
+ adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee));
+}
+
+/**
+ * adm_dma_irq - irq handler for ADM controller
+ * @irq: IRQ of interrupt
+ * @data: callback data
+ *
+ * IRQ handler for the bam controller
+ */
+static irqreturn_t adm_dma_irq(int irq, void *data)
+{
+ struct adm_device *adev = data;
+ u32 srcs, i;
+ struct adm_async_desc *async_desc;
+ unsigned long flags;
+
+ srcs = readl_relaxed(adev->regs +
+ ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee));
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
+ struct adm_chan *achan = &adev->channels[i];
+ u32 status, result;
+
+ if (srcs & BIT(i)) {
+ status = readl_relaxed(adev->regs +
+ ADM_CH_STATUS_SD(i, adev->ee));
+
+ /* if no result present, skip */
+ if (!(status & ADM_CH_STATUS_VALID))
+ continue;
+
+ result = readl_relaxed(adev->regs +
+ ADM_CH_RSLT(i, adev->ee));
+
+ /* no valid results, skip */
+ if (!(result & ADM_CH_RSLT_VALID))
+ continue;
+
+ /* flag error if transaction was flushed or failed */
+ if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH))
+ achan->error = 1;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+ async_desc = achan->curr_txd;
+
+ achan->curr_txd = NULL;
+
+ if (async_desc) {
+ vchan_cookie_complete(&async_desc->vd);
+
+ /* kick off next DMA */
+ adm_start_dma(achan);
+ }
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * adm_tx_status - returns status of transaction
+ * @chan: dma channel
+ * @cookie: transaction cookie
+ * @txstate: DMA transaction state
+ *
+ * Return status of dma transaction
+ */
+static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct virt_dma_desc *vd;
+ enum dma_status ret;
+ unsigned long flags;
+ size_t residue = 0;
+
+ ret = dma_cookie_status(chan, cookie, txstate);
+ if (ret == DMA_COMPLETE || !txstate)
+ return ret;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+
+ vd = vchan_find_desc(&achan->vc, cookie);
+ if (vd)
+ residue = container_of(vd, struct adm_async_desc, vd)->length;
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+
+ /*
+ * residue is either the full length if it is in the issued list, or 0
+ * if it is in progress. We have no reliable way of determining
+ * anything inbetween
+ */
+ dma_set_residue(txstate, residue);
+
+ if (achan->error)
+ return DMA_ERROR;
+
+ return ret;
+}
+
+/**
+ * adm_issue_pending - starts pending transactions
+ * @chan: dma channel
+ *
+ * Issues all pending transactions and starts DMA
+ */
+static void adm_issue_pending(struct dma_chan *chan)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+
+ if (vchan_issue_pending(&achan->vc) && !achan->curr_txd)
+ adm_start_dma(achan);
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+}
+
+/**
+ * adm_dma_free_desc - free descriptor memory
+ * @vd: virtual descriptor
+ *
+ */
+static void adm_dma_free_desc(struct virt_dma_desc *vd)
+{
+ struct adm_async_desc *async_desc = container_of(vd,
+ struct adm_async_desc, vd);
+
+ dma_free_writecombine(async_desc->adev->dev, async_desc->dma_len,
+ async_desc->cpl, async_desc->dma_addr);
+ kfree(async_desc);
+}
+
+static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
+ u32 index)
+{
+ achan->id = index;
+ achan->adev = adev;
+
+ vchan_init(&achan->vc, &adev->common);
+ achan->vc.desc_free = adm_dma_free_desc;
+}
+
+static int adm_dma_probe(struct platform_device *pdev)
+{
+ struct adm_device *adev;
+ struct resource *iores;
+ int ret;
+ u32 i;
+
+ adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
+ if (!adev)
+ return -ENOMEM;
+
+ adev->dev = &pdev->dev;
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ adev->regs = devm_ioremap_resource(&pdev->dev, iores);
+ if (IS_ERR(adev->regs))
+ return PTR_ERR(adev->regs);
+
+ adev->irq = platform_get_irq(pdev, 0);
+ if (adev->irq < 0)
+ return adev->irq;
+
+ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
+ if (ret) {
+ dev_err(adev->dev, "Execution environment unspecified\n");
+ return ret;
+ }
+
+ adev->core_clk = devm_clk_get(adev->dev, "core");
+ if (IS_ERR(adev->core_clk))
+ return PTR_ERR(adev->core_clk);
+
+ ret = clk_prepare_enable(adev->core_clk);
+ if (ret) {
+ dev_err(adev->dev, "failed to prepare/enable core clock\n");
+ return ret;
+ }
+
+ adev->iface_clk = devm_clk_get(adev->dev, "iface");
+ if (IS_ERR(adev->iface_clk)) {
+ ret = PTR_ERR(adev->iface_clk);
+ goto err_disable_core_clk;
+ }
+
+ ret = clk_prepare_enable(adev->iface_clk);
+ if (ret) {
+ dev_err(adev->dev, "failed to prepare/enable iface clock\n");
+ goto err_disable_core_clk;
+ }
+
+ adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk");
+ if (IS_ERR(adev->clk_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 reset\n");
+ ret = PTR_ERR(adev->clk_reset);
+ goto err_disable_clks;
+ }
+
+ adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0");
+ if (IS_ERR(adev->c0_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
+ ret = PTR_ERR(adev->c0_reset);
+ goto err_disable_clks;
+ }
+
+ adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1");
+ if (IS_ERR(adev->c1_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
+ ret = PTR_ERR(adev->c1_reset);
+ goto err_disable_clks;
+ }
+
+ adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2");
+ if (IS_ERR(adev->c2_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
+ ret = PTR_ERR(adev->c2_reset);
+ goto err_disable_clks;
+ }
+
+ reset_control_assert(adev->clk_reset);
+ reset_control_assert(adev->c0_reset);
+ reset_control_assert(adev->c1_reset);
+ reset_control_assert(adev->c2_reset);
+
+ reset_control_deassert(adev->clk_reset);
+ reset_control_deassert(adev->c0_reset);
+ reset_control_deassert(adev->c1_reset);
+ reset_control_deassert(adev->c2_reset);
+
+ adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS,
+ sizeof(*adev->channels), GFP_KERNEL);
+
+ if (!adev->channels) {
+ ret = -ENOMEM;
+ goto err_disable_clks;
+ }
+
+ /* allocate and initialize channels */
+ INIT_LIST_HEAD(&adev->common.channels);
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++)
+ adm_channel_init(adev, &adev->channels[i], i);
+
+ /* reset CRCIs */
+ for (i = 0; i < 16; i++)
+ writel(ADM_CRCI_CTL_RST, adev->regs +
+ ADM_CRCI_CTL(i, adev->ee));
+
+ /* configure client interfaces */
+ writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0));
+ writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1));
+ writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2));
+ writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf),
+ adev->regs + ADM_GP_CTL);
+
+ ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq,
+ 0, "adm_dma", adev);
+ if (ret)
+ goto err_disable_clks;
+
+ platform_set_drvdata(pdev, adev);
+
+ adev->common.dev = adev->dev;
+ adev->common.dev->dma_parms = &adev->dma_parms;
+
+ /* set capabilities */
+ dma_cap_zero(adev->common.cap_mask);
+ dma_cap_set(DMA_SLAVE, adev->common.cap_mask);
+ dma_cap_set(DMA_PRIVATE, adev->common.cap_mask);
+
+ /* initialize dmaengine apis */
+ adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV);
+ adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
+ adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ adev->common.device_free_chan_resources = adm_free_chan;
+ adev->common.device_prep_slave_sg = adm_prep_slave_sg;
+ adev->common.device_issue_pending = adm_issue_pending;
+ adev->common.device_tx_status = adm_tx_status;
+ adev->common.device_terminate_all = adm_terminate_all;
+ adev->common.device_config = adm_slave_config;
+
+ ret = dma_async_device_register(&adev->common);
+ if (ret) {
+ dev_err(adev->dev, "failed to register dma async device\n");
+ goto err_disable_clks;
+ }
+
+ ret = of_dma_controller_register(pdev->dev.of_node,
+ of_dma_xlate_by_chan_id,
+ &adev->common);
+ if (ret)
+ goto err_unregister_dma;
+
+ return 0;
+
+err_unregister_dma:
+ dma_async_device_unregister(&adev->common);
+err_disable_clks:
+ clk_disable_unprepare(adev->iface_clk);
+err_disable_core_clk:
+ clk_disable_unprepare(adev->core_clk);
+
+ return ret;
+}
+
+static int adm_dma_remove(struct platform_device *pdev)
+{
+ struct adm_device *adev = platform_get_drvdata(pdev);
+ struct adm_chan *achan;
+ u32 i;
+
+ of_dma_controller_free(pdev->dev.of_node);
+ dma_async_device_unregister(&adev->common);
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
+ achan = &adev->channels[i];
+
+ /* mask IRQs for this channel/EE pair */
+ writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
+
+ adm_terminate_all(&adev->channels[i].vc.chan);
+ }
+
+ devm_free_irq(adev->dev, adev->irq, adev);
+
+ clk_disable_unprepare(adev->core_clk);
+ clk_disable_unprepare(adev->iface_clk);
+
+ return 0;
+}
+
+static const struct of_device_id adm_of_match[] = {
+ { .compatible = "qcom,adm", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, adm_of_match);
+
+static struct platform_driver adm_dma_driver = {
+ .probe = adm_dma_probe,
+ .remove = adm_dma_remove,
+ .driver = {
+ .name = "adm-dma-engine",
+ .of_match_table = adm_of_match,
+ },
+};
+
+module_platform_driver(adm_dma_driver);
+
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -54,3 +54,4 @@ obj-$(CONFIG_NBPFAXI_DMA) += nbpfaxi.o
obj-$(CONFIG_DMA_SUN6I) += sun6i-dma.o
obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
+obj-$(CONFIG_QCOM_ADM) += qcom_adm.o

54
target/linux/ipq806x/patches-4.1/157-ARM-DT-ipq8064-Add-ADM-device-node.patch Normal file
View File

@ -0,0 +1,54 @@
From 1fb18acab2d71e7e4efd9c10492edb1baf84dcc0 Mon Sep 17 00:00:00 2001
From: Andy Gross <agross@codeaurora.org>
Date: Wed, 20 May 2015 15:41:07 +0530
Subject: [PATCH] ARM: DT: ipq8064: Add ADM device node
This patch adds support for the ADM DMA on the IPQ8064 SOC
Signed-off-by: Andy Gross <agross@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 4 ++++
arch/arm/boot/dts/qcom-ipq8064.dtsi | 21 +++++++++++++++++++++
2 files changed, 25 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -90,6 +90,10 @@
cs-gpios = <&qcom_pinmux 20 0>;
+ dmas = <&adm_dma 6>,
+ <&adm_dma 5>;
+ dma-names = "rx", "tx";
+
flash: m25p80@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -595,5 +595,25 @@
status = "disabled";
};
+
+ adm_dma: dma@18300000 {
+ compatible = "qcom,adm";
+ reg = <0x18300000 0x100000>;
+ interrupts = <0 170 0>;
+ #dma-cells = <1>;
+
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc ADM0_RESET>,
+ <&gcc ADM0_PBUS_RESET>,
+ <&gcc ADM0_C0_RESET>,
+ <&gcc ADM0_C1_RESET>,
+ <&gcc ADM0_C2_RESET>;
+ reset-names = "clk", "pbus", "c0", "c1", "c2";
+ qcom,ee = <0>;
+
+ status = "disabled";
+ };
};
};

2
target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
View File

@ -38,7 +38,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
};
gsbi@16300000 {
@@ -146,5 +156,33 @@
@@ -150,5 +160,33 @@
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
};

4
target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
View File

@ -29,7 +29,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
};
gsbi@16300000 {
@@ -184,5 +194,26 @@
@@ -188,5 +198,26 @@
reg = <4>;
};
};
@ -116,7 +116,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
};
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -595,5 +595,91 @@
@@ -615,5 +615,91 @@
status = "disabled";
};