imx6: drop 4.3 support

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48299
lede-17.01
Luka Perkov 2016-01-18 06:43:48 +00:00
parent 85bdde7cf2
commit c4de2dfd2d
18 changed files with 0 additions and 2978 deletions

View File

@ -1,410 +0,0 @@
CONFIG_AHCI_IMX=y
CONFIG_ALIGNMENT_TRAP=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MXC=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARM=y
# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
# CONFIG_ARM_CCI500_PMU is not set
# CONFIG_ARM_CPU_SUSPEND is not set
CONFIG_ARM_ERRATA_754322=y
CONFIG_ARM_ERRATA_764369=y
CONFIG_ARM_ERRATA_775420=y
CONFIG_ARM_GIC=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_HEAVY_MB=y
CONFIG_ARM_IMX6Q_CPUFREQ=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
# CONFIG_ARM_LPAE is not set
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_ARM_PMU=y
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_ARM_VIRT_EXT=y
CONFIG_ATA=y
CONFIG_ATAGS=y
# CONFIG_ATA_SFF is not set
CONFIG_AUTO_ZRELADDR=y
CONFIG_CACHE_L2X0=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_IMX_GPT=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
CONFIG_CPUFREQ_DT=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_HAS_ASID=y
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_RMAP=y
CONFIG_CPU_THERMAL=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_V7=y
CONFIG_CRC16=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_XZ=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_DEBUG_IMX_UART_PORT=1
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
# CONFIG_DEBUG_UART_8250 is not set
# CONFIG_DEBUG_USER is not set
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DMADEVICES=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
CONFIG_DTC=y
# CONFIG_DW_DMAC_PCI is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_FEC=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_FRAME_POINTER=y
# CONFIG_FSL_PQ_MDIO is not set
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
# CONFIG_GIANFAR is not set
CONFIG_GLOB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MXC=y
CONFIG_GPIO_SYSFS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_ARM_SCU=y
CONFIG_HAVE_ARM_TWD=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_BPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IMX_ANATOP=y
CONFIG_HAVE_IMX_GPC=y
CONFIG_HAVE_IMX_MMDC=y
CONFIG_HAVE_IMX_SRC=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SMP=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_HSU_DMA_PCI is not set
CONFIG_HZ_FIXED=0
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IMX=y
CONFIG_IMX2_WDT=y
CONFIG_IMX_DMA=y
CONFIG_IMX_SDMA=y
CONFIG_IMX_THERMAL=y
# CONFIG_IMX_WEIM is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IOMMU_HELPER=y
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_JBD2=y
CONFIG_LIBFDT=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
# CONFIG_MMC_MXC is not set
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_GPMI_NAND=y
# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_MX3_IPU is not set
CONFIG_MXS_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEON=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NO_BOOTMEM=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NR_CPUS=4
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_PCI=y
CONFIG_PCIEAER=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_DW=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_IMX6=y
CONFIG_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX=y
CONFIG_PINCTRL_IMX6Q=y
CONFIG_PINCTRL_IMX6SL=y
CONFIG_PINCTRL_IMX6SX=y
CONFIG_PINCTRL_IMX6UL=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PL310_ERRATA_588369=y
CONFIG_PL310_ERRATA_727915=y
# CONFIG_PL310_ERRATA_753970 is not set
CONFIG_PL310_ERRATA_769419=y
CONFIG_PM_OPP=y
CONFIG_PPS=y
CONFIG_PTP_1588_CLOCK=y
CONFIG_RAS=y
CONFIG_RATIONAL=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RD_BZIP2=y
CONFIG_RD_GZIP=y
CONFIG_RD_LZO=y
CONFIG_RD_XZ=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_SPI=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_IMXDI is not set
# CONFIG_RTC_DRV_MXC is not set
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCHED_INFO is not set
CONFIG_SCSI=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
# CONFIG_SG_SPLIT is not set
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_SOC_BUS=y
# CONFIG_SOC_IMX50 is not set
# CONFIG_SOC_IMX51 is not set
# CONFIG_SOC_IMX53 is not set
CONFIG_SOC_IMX6=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
CONFIG_SOC_IMX6SX=y
CONFIG_SOC_IMX6UL=y
# CONFIG_SOC_IMX7D is not set
# CONFIG_SOC_LS1021A is not set
# CONFIG_SOC_VF610 is not set
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_IMX=y
CONFIG_SPI_MASTER=y
CONFIG_SRAM=y
CONFIG_SRCU=y
CONFIG_STMP_DEVICE=y
CONFIG_STOP_MACHINE=y
# CONFIG_SUNXI_SRAM is not set
CONFIG_SWIOTLB=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_THERMAL=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TREE_RCU=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_XZ=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
# CONFIG_USB_MXS_PHY is not set
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_VMSPLIT_2G=y
# CONFIG_VMSPLIT_3G is not set
CONFIG_WATCHDOG_CORE=y
CONFIG_XPS=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZONE_DMA_FLAG=0

File diff suppressed because it is too large Load Diff

View File

@ -1,123 +0,0 @@
/*
* drivers/net/phy/mv88e6176.h
*
* Driver for Marvell Switch
*
* Author: Tim Harvey
*
* Copyright (c) 2014 Tim Harvey <tharvey@gateworks.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef _GW16083_H_
#define _GW16083_H_
#define MII_MARVELL_PHY_PAGE 22
/*
* I2C Addresses
*/
#define GW16083_I2C_ADDR_SFP1 0x50
#define GW16083_I2C_ADDR_SFP2 0x51
#define GW16083_I2C_ADDR_EEPROM 0x52
#define GW16083_I2C_ADDR_PCA9543 0x70
/*
* MV88E1111 PHY Registers
*/
enum {
MII_M1111_PHY_CONTROL = 0,
MII_M1111_PHY_STATUS = 1,
MII_M1111_PHY_IDENT0 = 2,
MII_M1111_PHY_IDENT1 = 3,
MII_M1111_PHY_EXT_CR = 20,
MII_M1111_PHY_LED_CONTROL = 24,
MII_M1111_PHY_EXT_SR = 27,
};
#define MII_M1111_PHY_ID_MASK 0xfffffff0
#define MII_M1111_PHY_ID 0x01410cc0
#define MII_M1111_PHY_CONTROL_RESET (1 << 15)
#define MII_M1111_PHY_LED_DIRECT 0x4100
#define MII_M1111_PHY_LED_PULSE_STR 0x4111
#define MII_M1111_PHY_LED_COMBINE 0x411c
#define MII_M1111_RX_DELAY 0x80
#define MII_M1111_TX_DELAY 0x2
/*
* MV88E6176 Switch Registers
*/
/* PHY Addrs */
#define MV_BASE 0x10
#define MV_GLOBAL1 0x1b
#define MV_GLOBAL2 0x1c
#define MV_GLOBAL3 0x1d
/* Global2 Registers */
enum {
MV_SMI_PHY_COMMAND = 0x18,
MV_SMI_PHY_DATA = 0x19,
MV_SCRATCH_MISC = 0x1A,
};
/* Scratch And Misc Reg offsets */
enum {
MV_GPIO_MODE = 0x60,
MV_GPIO_DIR = 0x62,
MV_GPIO_DATA = 0x64,
MV_GPIO76_CNTL = 0x6B,
MV_GPIO54_CNTL = 0x6A,
MV_GPIO32_CNTL = 0x69,
MV_GPIO10_CNTL = 0x68,
MV_CONFIG0 = 0x70,
MV_CONFIG1 = 0x71,
MV_CONFIG2 = 0x72,
MV_CONFIG3 = 0x73,
};
/* PHY Registers */
enum {
MV_PHY_CONTROL = 0x00,
MV_PHY_STATUS = 0x01,
MV_PHY_IDENT0 = 0x02,
MV_PHY_IDENT1 = 0x03,
MV_PHY_ANEG = 0x04,
MV_PHY_LINK_ABILITY = 0x05,
MV_PHY_ANEG_EXPAND = 0x06,
MV_PHY_XMIT_NEXTP = 0x07,
MV_PHY_LINK_NEXTP = 0x08,
MV_PHY_CONTROL1 = 0x10,
MV_PHY_STATUS1 = 0x11,
MV_PHY_INTR_EN = 0x12,
};
/* Port Registers */
enum {
MV_PORT_STATUS = 0x00,
MV_PORT_PHYS_CONTROL = 0x01,
MV_PORT_IDENT = 0x03,
MV_PORT_CONTROL = 0x04,
MV_PORT_VLANMAP = 0x06,
MV_PORT_ASSOC = 0x0b,
MV_PORT_RXCOUNT = 0x10,
MV_PORT_TXCOUNT = 0x11,
};
#define SMIBUSY (1<<15)
#define SMIMODE22 (1<<12)
#define SMIOP_READ (2<<10)
#define SMIOP_WRITE (1<<10)
#define DEVADDR 5
#define REGADDR 0
#define MV_IDENT_MASK 0x0000fff0
#define MV_IDENT_VALUE 0x00001760
#endif /* _GW16083_H_ */

View File

@ -1,26 +0,0 @@
From 57b82d9e79d77442bae3d2c13b98ceccb39fe5e2 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Thu, 5 Nov 2015 10:49:31 -0800
Subject: [PATCH 1/3] ARM: dts: imx: ventana: set GW54xx PMIC swbst regulator
as always-on
The GW54xx PMIC swbst regulator is used for LVDS power, CANbus xceiver
and HDMI DDC and is enabled by the bootloader. Set the regulator to
always-on so that Linux doesn't turn it off thinking its not needed.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -260,6 +260,8 @@
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
+ regulator-boot-on;
+ regulator-always-on;
};
snvs_reg: vsnvs {

View File

@ -1,33 +0,0 @@
From 473d0353979db3673a7aa365265ba9b00decd414 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Thu, 5 Nov 2015 10:52:53 -0800
Subject: [PATCH 2/3] ARM: dts: imx: ventana: fix GW53xx/GW54xx lvds channel
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -247,7 +247,7 @@
&ldb {
status = "okay";
- lvds-channel@1 {
+ lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "okay";
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -338,7 +338,7 @@
&ldb {
status = "okay";
- lvds-channel@1 {
+ lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "okay";

View File

@ -1,70 +0,0 @@
From d86b202436b6f3111c4c37b8701daa0764d2ca55 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Thu, 5 Nov 2015 11:10:00 -0800
Subject: [PATCH 3/3] ARM: dts: imx: ventana: Allow HDMI and LVDS to work
simultaneously
Currently it is not possible to have HDMI and LVDS working simultaneously,
because both ports try to use PLL5.
Move the LVDS clock parent to PLL3_USB_OTG, so that HDMI and LVDS can be
driven from independent sources.
With this change the LDB pixel clock goes to 68.57 MHz, which is still
within the valid range for the displays supported by the Ventana boards.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 7 +++++++
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 7 +++++++
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 7 +++++++
3 files changed, 21 insertions(+)
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -151,6 +151,13 @@
status = "okay";
};
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -152,6 +152,13 @@
status = "okay";
};
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -142,6 +142,13 @@
status = "okay";
};
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;

View File

@ -1,264 +0,0 @@
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -174,6 +174,24 @@
status = "okay";
};
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+ status = "disabled";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -294,6 +312,24 @@
>;
};
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -282,6 +282,18 @@
status = "okay";
};
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
@@ -436,6 +448,18 @@
>;
};
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -287,6 +287,18 @@
};
};
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
@@ -442,6 +454,18 @@
>;
};
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -378,6 +378,24 @@
};
};
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
+ status = "disabled";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
@@ -537,6 +555,24 @@
>;
};
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -198,6 +198,18 @@
status = "okay";
};
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
&ssi1 {
status = "okay";
};
@@ -290,6 +302,18 @@
>;
};
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -164,6 +164,18 @@
status = "okay";
};
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
@@ -242,6 +254,18 @@
>;
};
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1

View File

@ -1,33 +0,0 @@
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -158,6 +158,14 @@
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
};
+&ecspi3 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ status = "okay";
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
@@ -357,6 +365,15 @@
>;
};
+ pinctrl_ecspi3: escpi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1
+ >;
+ };
+
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0

View File

@ -1,112 +0,0 @@
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -55,6 +55,7 @@
#define TEMPSENSE2_PANIC_VALUE_SHIFT 16
#define TEMPSENSE2_PANIC_VALUE_MASK 0xfff0000
+#define OCOTP_MEM0 0x0480
#define OCOTP_ANA1 0x04e0
/* The driver supports 1 passive trip point and 1 critical trip point */
@@ -64,12 +65,6 @@ enum imx_thermal_trip {
IMX_TRIP_NUM,
};
-/*
- * It defines the temperature in millicelsius for passive trip point
- * that will trigger cooling action when crossed.
- */
-#define IMX_TEMP_PASSIVE 85000
-
#define IMX_POLLING_DELAY 2000 /* millisecond */
#define IMX_PASSIVE_DELAY 1000
@@ -100,12 +95,14 @@ struct imx_thermal_data {
u32 c1, c2; /* See formula in imx_get_sensor_data() */
int temp_passive;
int temp_critical;
+ unsigned long temp_max;
int alarm_temp;
int last_temp;
bool irq_enabled;
int irq;
struct clk *thermal_clk;
const struct thermal_soc_data *socdata;
+ const char *temp_grade;
};
static void imx_set_panic_temp(struct imx_thermal_data *data,
@@ -285,10 +282,12 @@ static int imx_set_trip_temp(struct ther
{
struct imx_thermal_data *data = tz->devdata;
+ /* do not allow changing critical threshold */
if (trip == IMX_TRIP_CRITICAL)
return -EPERM;
- if (temp > IMX_TEMP_PASSIVE)
+ /* do not allow passive to be set higher than critical */
+ if (temp < 0 || temp > data->temp_critical)
return -EINVAL;
data->temp_passive = temp;
@@ -404,17 +403,39 @@ static int imx_get_sensor_data(struct pl
data->c1 = temp64;
data->c2 = n1 * data->c1 + 1000 * t1;
- /*
- * Set the default passive cooling trip point,
- * can be changed from userspace.
- */
- data->temp_passive = IMX_TEMP_PASSIVE;
+ /* use OTP for thermal grade */
+ ret = regmap_read(map, OCOTP_MEM0, &val);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read temp grade: %d\n", ret);
+ return ret;
+ }
+
+ /* The maximum die temp is specified by the Temperature Grade */
+ switch ((val >> 6) & 0x3) {
+ case 0: /* Commercial (0 to 95C) */
+ data->temp_grade = "Commercial";
+ data->temp_max = 95000;
+ break;
+ case 1: /* Extended Commercial (-20 to 105C) */
+ data->temp_grade = "Extended Commercial";
+ data->temp_max = 105000;
+ break;
+ case 2: /* Industrial (-40 to 105C) */
+ data->temp_grade = "Industrial";
+ data->temp_max = 105000;
+ break;
+ case 3: /* Automotive (-40 to 125C) */
+ data->temp_grade = "Automotive";
+ data->temp_max = 125000;
+ break;
+ }
/*
- * The maximum die temperature set to 20 C higher than
- * IMX_TEMP_PASSIVE.
+ * Set the critical trip point at 5C under max
+ * Set the passive trip point at 10C under max (can change via sysfs)
*/
- data->temp_critical = 1000 * 20 + data->temp_passive;
+ data->temp_critical = data->temp_max - (1000 * 5);
+ data->temp_passive = data->temp_max - (1000 * 10);
return 0;
}
@@ -559,6 +580,11 @@ static int imx_thermal_probe(struct plat
return ret;
}
+ dev_info(&pdev->dev, "%s CPU temperature grade - max:%ldC"
+ " critical:%ldC passive:%ldC\n", data->temp_grade,
+ data->temp_max / 1000, data->temp_critical / 1000,
+ data->temp_passive / 1000);
+
/* Enable measurements at ~ 10 Hz */
regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ);
measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */

View File

@ -1,11 +0,0 @@
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
@@ -19,4 +19,8 @@
memory {
reg = <0x10000000 0x40000000>;
};
+
+ chosen {
+ bootargs = "console=ttymxc0,115200";
+ };
};

View File

@ -1,129 +0,0 @@
Author: Tim Harvey <tharvey@gateworks.com>
Date: Thu May 15 00:12:26 2014 -0700
net: igb: add i210/i211 support for phy read/write
The i210/i211 uses the MDICNFG register for the phy address instead of the
MDIC register.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -129,7 +129,7 @@ out:
s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
{
struct e1000_phy_info *phy = &hw->phy;
- u32 i, mdic = 0;
+ u32 i, mdicnfg, mdic = 0;
s32 ret_val = 0;
if (offset > MAX_PHY_REG_ADDRESS) {
@@ -142,11 +142,25 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
* Control register. The MAC will take care of interfacing with the
* PHY to retrieve the desired data.
*/
- mdic = ((offset << E1000_MDIC_REG_SHIFT) |
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
- (E1000_MDIC_OP_READ));
+ switch (hw->mac.type) {
+ case e1000_i210:
+ case e1000_i211:
+ mdicnfg = rd32(E1000_MDICNFG);
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
+ mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
+ wr32(E1000_MDICNFG, mdicnfg);
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+ (E1000_MDIC_OP_READ));
+ break;
+ default:
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_READ));
+ break;
+ }
wr32(E1000_MDIC, mdic);
+ wrfl();
/* Poll the ready bit to see if the MDI read completed
* Increasing the time out as testing showed failures with
@@ -171,6 +185,18 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
*data = (u16) mdic;
out:
+ switch (hw->mac.type) {
+ /* restore MDICNFG to have phy's addr */
+ case e1000_i210:
+ case e1000_i211:
+ mdicnfg = rd32(E1000_MDICNFG);
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
+ mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
+ wr32(E1000_MDICNFG, mdicnfg);
+ break;
+ default:
+ break;
+ }
return ret_val;
}
@@ -185,7 +211,7 @@ out:
s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
{
struct e1000_phy_info *phy = &hw->phy;
- u32 i, mdic = 0;
+ u32 i, mdicnfg, mdic = 0;
s32 ret_val = 0;
if (offset > MAX_PHY_REG_ADDRESS) {
@@ -198,12 +224,27 @@ s32 igb_write_phy_reg_mdic(struct e1000_
* Control register. The MAC will take care of interfacing with the
* PHY to retrieve the desired data.
*/
- mdic = (((u32)data) |
- (offset << E1000_MDIC_REG_SHIFT) |
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
- (E1000_MDIC_OP_WRITE));
+ switch (hw->mac.type) {
+ case e1000_i210:
+ case e1000_i211:
+ mdicnfg = rd32(E1000_MDICNFG);
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
+ mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
+ wr32(E1000_MDICNFG, mdicnfg);
+ mdic = (((u32)data) |
+ (offset << E1000_MDIC_REG_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+ break;
+ default:
+ mdic = (((u32)data) |
+ (offset << E1000_MDIC_REG_SHIFT) |
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+ break;
+ }
wr32(E1000_MDIC, mdic);
+ wrfl();
/* Poll the ready bit to see if the MDI read completed
* Increasing the time out as testing showed failures with
@@ -227,6 +268,18 @@ s32 igb_write_phy_reg_mdic(struct e1000_
}
out:
+ switch (hw->mac.type) {
+ /* restore MDICNFG to have phy's addr */
+ case e1000_i210:
+ case e1000_i211:
+ mdicnfg = rd32(E1000_MDICNFG);
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
+ mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
+ wr32(E1000_MDICNFG, mdicnfg);
+ break;
+ default:
+ break;
+ }
return ret_val;
}

View File

@ -1,260 +0,0 @@
From 16df7dc5901c1cb2a40f6adbd0d9423768ed8210 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Thu, 15 May 2014 00:29:18 -0700
Subject: [PATCH] net: igb: add phy read/write functions that accept phy addr
Add igb_write_reg_gs40g/igb_read_reg_gs40g that can be passed a phy address.
The existing igb_write_phy_reg_gs40g/igb_read_phy_reg_gs40g become wrappers
to this function.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
drivers/net/ethernet/intel/igb/e1000_82575.c | 4 +-
drivers/net/ethernet/intel/igb/e1000_phy.c | 74 +++++++++++++++++++---------
drivers/net/ethernet/intel/igb/e1000_phy.h | 6 ++-
3 files changed, 58 insertions(+), 26 deletions(-)
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2153,7 +2153,7 @@ static s32 igb_read_phy_reg_82580(struct
if (ret_val)
goto out;
- ret_val = igb_read_phy_reg_mdic(hw, offset, data);
+ ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr, offset, data);
hw->phy.ops.release(hw);
@@ -2178,7 +2178,7 @@ static s32 igb_write_phy_reg_82580(struc
if (ret_val)
goto out;
- ret_val = igb_write_phy_reg_mdic(hw, offset, data);
+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr, offset, data);
hw->phy.ops.release(hw);
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -126,9 +126,8 @@ out:
* Reads the MDI control regsiter in the PHY at offset and stores the
* information read to data.
**/
-s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
{
- struct e1000_phy_info *phy = &hw->phy;
u32 i, mdicnfg, mdic = 0;
s32 ret_val = 0;
@@ -147,14 +146,14 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
case e1000_i211:
mdicnfg = rd32(E1000_MDICNFG);
mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
- mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
+ mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
wr32(E1000_MDICNFG, mdicnfg);
mdic = ((offset << E1000_MDIC_REG_SHIFT) |
(E1000_MDIC_OP_READ));
break;
default:
mdic = ((offset << E1000_MDIC_REG_SHIFT) |
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
+ (addr << E1000_MDIC_PHY_SHIFT) |
(E1000_MDIC_OP_READ));
break;
}
@@ -208,9 +207,8 @@ out:
*
* Writes data to MDI control register in the PHY at offset.
**/
-s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
{
- struct e1000_phy_info *phy = &hw->phy;
u32 i, mdicnfg, mdic = 0;
s32 ret_val = 0;
@@ -229,7 +227,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
case e1000_i211:
mdicnfg = rd32(E1000_MDICNFG);
mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
- mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
+ mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
wr32(E1000_MDICNFG, mdicnfg);
mdic = (((u32)data) |
(offset << E1000_MDIC_REG_SHIFT) |
@@ -238,7 +236,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
default:
mdic = (((u32)data) |
(offset << E1000_MDIC_REG_SHIFT) |
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
+ (addr << E1000_MDIC_PHY_SHIFT) |
(E1000_MDIC_OP_WRITE));
break;
}
@@ -458,7 +456,7 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
goto out;
if (offset > MAX_PHY_MULTI_PAGE_REG) {
- ret_val = igb_write_phy_reg_mdic(hw,
+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
IGP01E1000_PHY_PAGE_SELECT,
(u16)offset);
if (ret_val) {
@@ -467,8 +465,8 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
}
}
- ret_val = igb_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
+ ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr,
+ MAX_PHY_REG_ADDRESS & offset, data);
hw->phy.ops.release(hw);
@@ -497,7 +495,7 @@ s32 igb_write_phy_reg_igp(struct e1000_h
goto out;
if (offset > MAX_PHY_MULTI_PAGE_REG) {
- ret_val = igb_write_phy_reg_mdic(hw,
+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
IGP01E1000_PHY_PAGE_SELECT,
(u16)offset);
if (ret_val) {
@@ -506,8 +504,8 @@ s32 igb_write_phy_reg_igp(struct e1000_h
}
}
- ret_val = igb_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
+ MAX_PHY_REG_ADDRESS & offset, data);
hw->phy.ops.release(hw);
@@ -2547,8 +2545,9 @@ out:
}
/**
- * igb_write_phy_reg_gs40g - Write GS40G PHY register
+ * igb_write_reg_gs40g - Write GS40G PHY register
* @hw: pointer to the HW structure
+ * @addr: phy address to write to
* @offset: lower half is register offset to write to
* upper half is page to use.
* @data: data to write at register offset
@@ -2556,7 +2555,7 @@ out:
* Acquires semaphore, if necessary, then writes the data to PHY register
* at the offset. Release any acquired semaphores before exiting.
**/
-s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
+s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
{
s32 ret_val;
u16 page = offset >> GS40G_PAGE_SHIFT;
@@ -2566,10 +2565,10 @@ s32 igb_write_phy_reg_gs40g(struct e1000
if (ret_val)
return ret_val;
- ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
+ ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
if (ret_val)
goto release;
- ret_val = igb_write_phy_reg_mdic(hw, offset, data);
+ ret_val = igb_write_phy_reg_mdic(hw, addr, offset, data);
release:
hw->phy.ops.release(hw);
@@ -2577,8 +2576,24 @@ release:
}
/**
- * igb_read_phy_reg_gs40g - Read GS40G PHY register
+ * igb_write_phy_reg_gs40g - Write GS40G PHY register
+ * @hw: pointer to the HW structure
+ * @offset: lower half is register offset to write to
+ * upper half is page to use.
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return igb_write_reg_gs40g(hw, hw->phy.addr, offset, data);
+}
+
+/**
+ * igb_read_reg_gs40g - Read GS40G PHY register
* @hw: pointer to the HW structure
+ * @addr: phy address to read from
* @offset: lower half is register offset to read to
* upper half is page to use.
* @data: data to read at register offset
@@ -2586,7 +2601,7 @@ release:
* Acquires semaphore, if necessary, then reads the data in the PHY register
* at the offset. Release any acquired semaphores before exiting.
**/
-s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
+s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
{
s32 ret_val;
u16 page = offset >> GS40G_PAGE_SHIFT;
@@ -2596,10 +2611,10 @@ s32 igb_read_phy_reg_gs40g(struct e1000_
if (ret_val)
return ret_val;
- ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
+ ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
if (ret_val)
goto release;
- ret_val = igb_read_phy_reg_mdic(hw, offset, data);
+ ret_val = igb_read_phy_reg_mdic(hw, addr, offset, data);
release:
hw->phy.ops.release(hw);
@@ -2607,6 +2622,21 @@ release:
}
/**
+ * igb_read_phy_reg_gs40g - Read GS40G PHY register
+ * @hw: pointer to the HW structure
+ * @offset: lower half is register offset to read to
+ * upper half is page to use.
+ * @data: data to read at register offset
+ *
+ * Acquires semaphore, if necessary, then reads the data in the PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return igb_read_reg_gs40g(hw, hw->phy.addr, offset, data);
+}
+
+/**
* igb_set_master_slave_mode - Setup PHY for Master/slave mode
* @hw: pointer to the HW structure
*
--- a/drivers/net/ethernet/intel/igb/e1000_phy.h
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
@@ -62,8 +62,8 @@ void igb_power_up_phy_copper(struct e100
void igb_power_down_phy_copper(struct e1000_hw *hw);
s32 igb_phy_init_script_igp3(struct e1000_hw *hw);
s32 igb_initialize_M88E1512_phy(struct e1000_hw *hw);
-s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
-s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
s32 igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data);
@@ -73,6 +73,8 @@ s32 igb_phy_force_speed_duplex_82580(st
s32 igb_get_cable_length_82580(struct e1000_hw *hw);
s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
+s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
+s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
s32 igb_check_polarity_m88(struct e1000_hw *hw);
/* IGP01E1000 Specific Registers */

View File

@ -1,308 +0,0 @@
From 03855caf93f7332a3f320228ba1a0e7baae8a749 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Thu, 15 May 2014 12:36:23 -0700
Subject: [PATCH] net: igb: register mii_bus for SerDes w/ external phy
If an i210 is configured for 1000BASE-BX link_mode and has an external phy
specified, then register an mii bus using the external phy address as
a mask.
An i210 hooked to an external standard phy will be configured with a link_mo
of SGMII in which case phy ops will be configured and used internall in the
igb driver for link status. However, in certain cases one might be using a
backplane SerDes connection to something that talks on the mdio bus but is
not a standard phy, such as a switch. In this case by registering an mdio
bus a phy driver can manage the device.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
drivers/net/ethernet/intel/igb/e1000_82575.c | 15 +++
drivers/net/ethernet/intel/igb/e1000_hw.h | 7 ++
drivers/net/ethernet/intel/igb/igb_main.c | 168 ++++++++++++++++++++++++++-
3 files changed, 185 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -612,13 +612,25 @@ static s32 igb_get_invariants_82575(stru
switch (link_mode) {
case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
hw->phy.media_type = e1000_media_type_internal_serdes;
+ if (igb_sgmii_uses_mdio_82575(hw)) {
+ u32 mdicnfg = rd32(E1000_MDICNFG);
+ mdicnfg &= E1000_MDICNFG_PHY_MASK;
+ hw->phy.addr = mdicnfg >> E1000_MDICNFG_PHY_SHIFT;
+ hw_dbg("1000BASE_KX w/ external MDIO device at 0x%x\n",
+ hw->phy.addr);
+ } else {
+ hw_dbg("1000BASE_KX");
+ }
break;
case E1000_CTRL_EXT_LINK_MODE_SGMII:
/* Get phy control interface type set (MDIO vs. I2C)*/
if (igb_sgmii_uses_mdio_82575(hw)) {
hw->phy.media_type = e1000_media_type_copper;
dev_spec->sgmii_active = true;
+ hw_dbg("SGMII with external MDIO PHY");
break;
+ } else {
+ hw_dbg("SGMII with external I2C PHY");
}
/* fall through for I2C based SGMII */
case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
@@ -635,8 +647,11 @@ static s32 igb_get_invariants_82575(stru
hw->phy.media_type = e1000_media_type_copper;
dev_spec->sgmii_active = true;
}
+ hw_dbg("SERDES with external SFP");
break;
+ } else {
+ hw_dbg("SERDES");
}
/* do not change link mode for 100BaseFX */
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -27,6 +27,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/netdevice.h>
+#include <linux/phy.h>
#include "e1000_regs.h"
#include "e1000_defines.h"
@@ -543,6 +544,12 @@ struct e1000_hw {
struct e1000_mbx_info mbx;
struct e1000_host_mng_dhcp_cookie mng_cookie;
+#ifdef CONFIG_PHYLIB
+ /* Phylib and MDIO interface */
+ struct mii_bus *mii_bus;
+ struct phy_device *phy_dev;
+ phy_interface_t phy_interface;
+#endif
union {
struct e1000_dev_spec_82575 _82575;
} dev_spec;
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -41,6 +41,7 @@
#include <linux/if_vlan.h>
#include <linux/pci.h>
#include <linux/pci-aspm.h>
+#include <linux/phy.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/ip.h>
@@ -2223,6 +2224,126 @@ static s32 igb_init_i2c(struct igb_adapt
return status;
}
+
+#ifdef CONFIG_PHYLIB
+/*
+ * MMIO/PHYdev support
+ */
+
+static int igb_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct e1000_hw *hw = bus->priv;
+ u16 out;
+ int err;
+
+ err = igb_read_reg_gs40g(hw, mii_id, regnum, &out);
+ if (err)
+ return err;
+ return out;
+}
+
+static int igb_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
+ u16 val)
+{
+ struct e1000_hw *hw = bus->priv;
+
+ return igb_write_reg_gs40g(hw, mii_id, regnum, val);
+}
+
+static int igb_enet_mdio_reset(struct mii_bus *bus)
+{
+ udelay(300);
+ return 0;
+}
+
+static void igb_enet_mii_link(struct net_device *netdev)
+{
+}
+
+/* Probe the mdio bus for phys and connect them */
+static int igb_enet_mii_probe(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct phy_device *phy_dev = NULL;
+ int phy_id;
+
+ /* check for attached phy */
+ for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
+ if (hw->mii_bus->phy_map[phy_id]) {
+ phy_dev = hw->mii_bus->phy_map[phy_id];
+ break;
+ }
+ }
+ if (!phy_dev) {
+ netdev_err(netdev, "no PHY found\n");
+ return -ENODEV;
+ }
+
+ hw->phy_interface = PHY_INTERFACE_MODE_RGMII;
+ phy_dev = phy_connect(netdev, dev_name(&phy_dev->dev),
+ igb_enet_mii_link, hw->phy_interface);
+ if (IS_ERR(phy_dev)) {
+ netdev_err(netdev, "could not attach to PHY\n");
+ return PTR_ERR(phy_dev);
+ }
+
+ hw->phy_dev = phy_dev;
+ netdev_info(netdev, "igb PHY driver [%s] (mii_bus:phy_addr=%s)\n",
+ hw->phy_dev->drv->name, dev_name(&hw->phy_dev->dev));
+
+ return 0;
+}
+
+/* Create and register mdio bus */
+static int igb_enet_mii_init(struct pci_dev *pdev)
+{
+ struct mii_bus *mii_bus;
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ mii_bus = mdiobus_alloc();
+ if (mii_bus == NULL) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ mii_bus->name = "igb_enet_mii_bus";
+ mii_bus->read = igb_enet_mdio_read;
+ mii_bus->write = igb_enet_mdio_write;
+ mii_bus->reset = igb_enet_mdio_reset;
+ snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
+ pci_name(pdev), hw->device_id + 1);
+ mii_bus->priv = hw;
+ mii_bus->parent = &pdev->dev;
+ mii_bus->phy_mask = ~(1 << hw->phy.addr);
+
+ err = mdiobus_register(mii_bus);
+ if (err) {
+ printk(KERN_ERR "failed to register mii_bus: %d\n", err);
+ goto err_out_free_mdiobus;
+ }
+ hw->mii_bus = mii_bus;
+
+ return 0;
+
+err_out_free_mdiobus:
+ mdiobus_free(mii_bus);
+err_out:
+ return err;
+}
+
+static void igb_enet_mii_remove(struct e1000_hw *hw)
+{
+ if (hw->mii_bus) {
+ mdiobus_unregister(hw->mii_bus);
+ mdiobus_free(hw->mii_bus);
+ }
+}
+#endif /* CONFIG_PHYLIB */
+
/**
* igb_probe - Device Initialization Routine
* @pdev: PCI device information struct
@@ -2645,6 +2766,13 @@ static int igb_probe(struct pci_dev *pde
}
}
pm_runtime_put_noidle(&pdev->dev);
+
+#ifdef CONFIG_PHYLIB
+ /* create and register the mdio bus if using ext phy */
+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
+ igb_enet_mii_init(pdev);
+#endif
+
return 0;
err_register:
@@ -2792,6 +2920,10 @@ static void igb_remove(struct pci_dev *p
struct e1000_hw *hw = &adapter->hw;
pm_runtime_get_noresume(&pdev->dev);
+#ifdef CONFIG_PHYLIB
+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
+ igb_enet_mii_remove(hw);
+#endif
#ifdef CONFIG_IGB_HWMON
igb_sysfs_exit(adapter);
#endif
@@ -3105,6 +3237,12 @@ static int __igb_open(struct net_device
if (!resuming)
pm_runtime_put(&pdev->dev);
+#ifdef CONFIG_PHYLIB
+ /* Probe and connect to PHY if using ext phy */
+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
+ igb_enet_mii_probe(netdev);
+#endif
+
/* start the watchdog. */
hw->mac.get_link_status = 1;
schedule_work(&adapter->watchdog_task);
@@ -7090,21 +7228,41 @@ void igb_alloc_rx_buffers(struct igb_rin
static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
struct mii_ioctl_data *data = if_mii(ifr);
- if (adapter->hw.phy.media_type != e1000_media_type_copper)
+ if (adapter->hw.phy.media_type != e1000_media_type_copper &&
+ !(rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO))
return -EOPNOTSUPP;
switch (cmd) {
case SIOCGMIIPHY:
- data->phy_id = adapter->hw.phy.addr;
+ data->phy_id = hw->phy.addr;
break;
case SIOCGMIIREG:
- if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
- &data->val_out))
- return -EIO;
+ if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
+ if (igb_read_reg_gs40g(&adapter->hw, data->phy_id,
+ data->reg_num & 0x1F,
+ &data->val_out))
+ return -EIO;
+ } else {
+ if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+ &data->val_out))
+ return -EIO;
+ }
break;
case SIOCSMIIREG:
+ if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
+ if (igb_write_reg_gs40g(hw, data->phy_id,
+ data->reg_num & 0x1F,
+ data->val_in))
+ return -EIO;
+ } else {
+ if (igb_write_phy_reg(hw, data->reg_num & 0x1F,
+ data->val_in))
+ return -EIO;
+ }
+ break;
default:
return -EOPNOTSUPP;
}

View File

@ -1,27 +0,0 @@
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -309,6 +309,14 @@ endif # RTL8366_SMI
source "drivers/net/phy/b53/Kconfig"
+config GATEWORKS_GW16083
+ tristate "Gateworks GW16083 Ethernet Expansion Mezzanine"
+ ---help---
+ The Gateworks GW16083 Ethernet Expansion Mezzanine connects to a
+ Gateworks Ventana baseboard and provides a 7-port GbE managed
+ Ethernet switch with 4 dedicated GbE RJ45 ports, and 2 Gbe/SFP
+ ports"
+
endif # PHYLIB
config MICREL_KS8995MA
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_DP83848_PHY) += dp83848.o
obj-$(CONFIG_DP83867_PHY) += dp83867.o
obj-$(CONFIG_STE10XP) += ste10Xp.o
obj-$(CONFIG_MICREL_PHY) += micrel.o
+obj-$(CONFIG_GATEWORKS_GW16083) += gw16083.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
obj-$(CONFIG_AT803X_PHY) += at803x.o

View File

@ -1,56 +0,0 @@
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -158,6 +158,11 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+
+ gw16083: gw16083@52 {
+ compatible = "gateworks,gw16083";
+ reg = <0x52>;
+ };
};
&i2c3 {
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -233,6 +233,11 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+
+ gw16083: gw16083@52 {
+ compatible = "gateworks,gw16083";
+ reg = <0x52>;
+ };
};
&i2c3 {
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -226,6 +226,11 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+
+ gw16083: gw16083@52 {
+ compatible = "gateworks,gw16083";
+ reg = <0x52>;
+ };
};
&i2c3 {
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -317,6 +317,11 @@
};
};
};
+
+ gw16083: gw16083@52 {
+ compatible = "gateworks,gw16083";
+ reg = <0x52>;
+ };
};
&i2c3 {

View File

@ -1,22 +0,0 @@
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -461,6 +461,8 @@ static int i2c_imx_acked(struct imx_i2c_
{
if (imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR) & I2SR_RXAK) {
dev_dbg(&i2c_imx->adapter.dev, "<%s> No ACK\n", __func__);
+ if (i2c_imx->adapter.retries)
+ return -EAGAIN;
return -EIO; /* No ACK */
}
@@ -1010,6 +1012,10 @@ static int i2c_imx_probe(struct platform
i2c_imx->adapter.nr = pdev->id;
i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
i2c_imx->base = base;
+ if (of_machine_is_compatible("gw,ventana") && phy_addr == 0x021a0000) {
+ dev_info(&pdev->dev, "Adding retries for Ventana GSC\n");
+ i2c_imx->adapter.retries = 3;
+ }
/* Get I2C clock */
i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);

View File

@ -1,28 +0,0 @@
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -4812,7 +4812,24 @@ static struct net_device *sky2_init_netd
* 1) from device tree data
* 2) from internal registers set by bootloader
*/
- iap = of_get_mac_address(hw->pdev->dev.of_node);
+
+ iap = NULL;
+ if (IS_ENABLED(CONFIG_OF)) {
+ struct device_node *np;
+ np = of_find_node_by_path("/aliases");
+ if (np) {
+ const char *path = of_get_property(np, "sky2", NULL);
+ if (path)
+ np = of_find_node_by_path(path);
+ if (np)
+ path = of_get_mac_address(np);
+ if (path)
+ iap = (unsigned char *) path;
+ }
+ }
+
+ if (!iap)
+ iap = of_get_mac_address(hw->pdev->dev.of_node);
if (iap)
memcpy(dev->dev_addr, iap, ETH_ALEN);
else

View File

@ -1,20 +0,0 @@
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -15,6 +15,7 @@
/* these are used by bootloader for disabling nodes */
aliases {
ethernet1 = &eth1;
+ sky2 = &eth1;
led0 = &led0;
led1 = &led1;
led2 = &led2;
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -15,6 +15,7 @@
/* these are used by bootloader for disabling nodes */
aliases {
ethernet1 = &eth1;
+ sky2 = &eth1;
led0 = &led0;
led1 = &led1;
led2 = &led2;