mirror of https://github.com/hak5/openwrt.git
add support for Hauppauge Broadway
This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway platform. It doesn't deal with the TV tuner or transcoder at this point, but the core functionality is working (Ethernet, wireless, USB, buttons, LEDs, etc). Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> SVN-Revision: 34595lede-17.01
John Crispin
parent
cb9c63048d
commit
c2ae0ec02a
|
|
@ -59,6 +59,7 @@ case "$FIRMWARE" in
|
|||
all5002 | \
|
||||
argus-atp52b | \
|
||||
bc2 | \
|
||||
broadway | \
|
||||
carambola | \
|
||||
dir-615-h1 | \
|
||||
dir-620-a1 | \
|
||||
|
|
|
|||
|
|
@ -28,6 +28,10 @@ case $board in
|
|||
bc2)
|
||||
set_usb_led "bc2:blue:usb"
|
||||
;;
|
||||
broadway)
|
||||
set_usb_led "red:diskmounted"
|
||||
set_wifi_led "red:wps_active"
|
||||
;;
|
||||
dir-300-b1|\
|
||||
dir-600-b1|\
|
||||
dir-600-b2|\
|
||||
|
|
|
|||
|
|
@ -43,7 +43,8 @@ ramips_setup_interfaces()
|
|||
|
||||
case $board in
|
||||
all0256n | \
|
||||
all5002)
|
||||
all5002 | \
|
||||
broadway)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
|
||||
|
|
@ -141,6 +142,7 @@ ramips_setup_macs()
|
|||
3g-6200n | \
|
||||
argus-atp52b | \
|
||||
bc2 | \
|
||||
broadway | \
|
||||
f5d8235-v1 | \
|
||||
nw718 | \
|
||||
psr-680w | \
|
||||
|
|
|
|||
|
|
@ -13,6 +13,7 @@ preinit_set_mac_address() {
|
|||
ifconfig eth0 hw ether $mac 2>/dev/null
|
||||
;;
|
||||
bc2 |\
|
||||
broadway |\
|
||||
dir-620-a1 |\
|
||||
esr-9753 |\
|
||||
freestation5 |\
|
||||
|
|
|
|||
|
|
@ -110,6 +110,9 @@ ramips_board_name() {
|
|||
*"F5D8235 v2")
|
||||
name="f5d8235-v2"
|
||||
;;
|
||||
*"Hauppauge Broadway")
|
||||
name="broadway"
|
||||
;;
|
||||
*"La Fonera 2.0N")
|
||||
name="fonera20n"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -19,6 +19,7 @@ platform_check_image() {
|
|||
all0256n | \
|
||||
all5002 | \
|
||||
bc2 | \
|
||||
broadway | \
|
||||
carambola | \
|
||||
dir-300-b1 | \
|
||||
dir-600-b1 | \
|
||||
|
|
|
|||
|
|
@ -39,6 +39,7 @@ enum ramips_mach_type {
|
|||
RAMIPS_MACH_ALL0239_3G, /* ALL0239-3G */
|
||||
RAMIPS_MACH_ARGUS_ATP52B, /* Argus ATP-52B */
|
||||
RAMIPS_MACH_BC2, /* NexAira BC2 */
|
||||
RAMIPS_MACH_BROADWAY, /* Hauppauge Broadway */
|
||||
RAMIPS_MACH_DAP_1350, /* D-Link DAP-1350 */
|
||||
RAMIPS_MACH_ESR_9753, /* Senao / EnGenius ESR-9753*/
|
||||
RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */
|
||||
|
|
|
|||
|
|
@ -91,6 +91,11 @@ config RT305X_MACH_ESR_9753
|
|||
select RALINK_DEV_GPIO_BUTTONS
|
||||
select RALINK_DEV_GPIO_LEDS
|
||||
|
||||
config RT305X_MACH_BROADWAY
|
||||
bool "Hauppauge Broadway support"
|
||||
select RALINK_DEV_GPIO_BUTTONS
|
||||
select RALINK_DEV_GPIO_LEDS
|
||||
|
||||
config RT305X_MACH_FONERA20N
|
||||
bool "La Fonera20N board support"
|
||||
select RALINK_DEV_GPIO_BUTTONS
|
||||
|
|
|
|||
|
|
@ -16,6 +16,7 @@ obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o
|
|||
obj-$(CONFIG_RT305X_MACH_BC2) += mach-bc2.o
|
||||
obj-$(CONFIG_RT305X_MACH_ALL0256N) += mach-all0256n.o
|
||||
obj-$(CONFIG_RT305X_MACH_ALL5002) += mach-all5002.o
|
||||
obj-$(CONFIG_RT305X_MACH_BROADWAY) += mach-broadway.o
|
||||
obj-$(CONFIG_RT305X_MACH_CARAMBOLA) += mach-carambola.o
|
||||
obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o
|
||||
obj-$(CONFIG_RT305X_MACH_DIR_615_H1) += mach-dir-615-h1.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,87 @@
|
|||
/*
|
||||
* Hauppauge/PCTV Broadway Support
|
||||
*
|
||||
* Copyright (C) 2012 Devin Heitmueller <dheitmueller@kernellabs.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <asm/mach-ralink/machine.h>
|
||||
#include <asm/mach-ralink/dev-gpio-buttons.h>
|
||||
#include <asm/mach-ralink/dev-gpio-leds.h>
|
||||
#include <asm/mach-ralink/rt305x.h>
|
||||
#include <asm/mach-ralink/rt305x_regs.h>
|
||||
|
||||
#include "devices.h"
|
||||
|
||||
#define BROADWAY_GPIO_LED_DISKMOUNT 9
|
||||
#define BROADWAY_GPIO_LED_WPS 14
|
||||
|
||||
#define BROADWAY_GPIO_BUTTON_WPS 0
|
||||
#define BROADWAY_GPIO_BUTTON_FACTORYRESET 13
|
||||
|
||||
#define BROADWAY_KEYS_POLL_INTERVAL 20
|
||||
#define BROADWAY_KEYS_DEBOUNCE_INTERVAL (3 * BROADWAY_KEYS_POLL_INTERVAL)
|
||||
|
||||
static struct gpio_led broadway_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "red:diskmounted",
|
||||
.gpio = BROADWAY_GPIO_LED_DISKMOUNT,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "red:wps_active",
|
||||
.gpio = BROADWAY_GPIO_LED_WPS,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button broadway_gpio_buttons[] __initdata = {
|
||||
{
|
||||
.desc = "Factory Reset button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = BROADWAY_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = BROADWAY_GPIO_BUTTON_FACTORYRESET,
|
||||
.active_low = 1,
|
||||
},
|
||||
#ifdef DJH_WPS_BUTTON_NOT_WIRED_TO_GPIO
|
||||
{
|
||||
.desc = "WPS button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_WPS_BUTTON,
|
||||
.debounce_interval = BROADWAY_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = BROADWAY_GPIO_BUTTON_WPS,
|
||||
.active_low = 1,
|
||||
},
|
||||
#endif
|
||||
};
|
||||
|
||||
static void __init broadway_init(void)
|
||||
{
|
||||
rt305x_gpio_init((RT305X_GPIO_MODE_GPIO <<
|
||||
RT305X_GPIO_MODE_UART0_SHIFT));
|
||||
|
||||
rt305x_register_flash(0);
|
||||
|
||||
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
|
||||
rt305x_register_ethernet();
|
||||
|
||||
ramips_register_gpio_leds(-1, ARRAY_SIZE(broadway_leds_gpio),
|
||||
broadway_leds_gpio);
|
||||
ramips_register_gpio_buttons(-1, BROADWAY_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(broadway_gpio_buttons),
|
||||
broadway_gpio_buttons);
|
||||
|
||||
rt305x_register_wifi();
|
||||
rt305x_register_wdt();
|
||||
rt305x_register_usb();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(RAMIPS_MACH_BROADWAY, "BROADWAY", "Hauppauge Broadway",
|
||||
broadway_init);
|
||||
|
|
@ -162,6 +162,22 @@ define BuildFirmware/ARGUS_ATP52B
|
|||
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_argus_atp52b)),$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size))
|
||||
endef
|
||||
|
||||
# djh - Note all of these are marked Read-Only for now
|
||||
mtdlayout_broadway=192k(bootloader)ro,64k(config)ro,64k(factory)ro,1024k(kernel)ro,6720k(rootfs),7744k@0x50000(firmware)
|
||||
mtd_broadway_kernel_part_size=1048576
|
||||
mtd_broadway_rootfs_part_size=6881280
|
||||
define BuildFirmware/BROADWAY
|
||||
$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_broadway)),$(mtd_broadway_kernel_part_size),$(mtd_broadway_rootfs_part_size))
|
||||
mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry)\
|
||||
-n 'Broadway Kernel Image' \
|
||||
-d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage
|
||||
$(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(mtd_broadway_kernel_part_size),$(KDIR)/root.$(1),$(mtd_broadway_rootfs_part_size),$(call imgname,$(1),$(2))-factory.bin)
|
||||
endef
|
||||
|
||||
define BuildFirmware/BROADWAY/initramfs
|
||||
$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_broadway)))
|
||||
endef
|
||||
|
||||
define BuildFirmware/Buffalo
|
||||
$(call MkImageLzma,$(2),$(3))
|
||||
$(call Sysupgrade/KRuImage,$(1),$(2),$(4),$(5))
|
||||
|
|
@ -461,6 +477,10 @@ define Image/Build/Profile/BC2
|
|||
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,bc2,BC2,ttyS1,57600,phys)
|
||||
endef
|
||||
|
||||
define Image/Build/Profile/BROADWAY
|
||||
$(call Image/Build/Template/$(fs_squash)/$(1),BROADWAY,broadway,BROADWAY,ttyS1,57600,phys)
|
||||
endef
|
||||
|
||||
define Image/Build/Profile/CARAMBOLA
|
||||
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,carambola,CARAMBOLA,ttyS1,115200,phys)
|
||||
endef
|
||||
|
|
@ -604,6 +624,7 @@ define Image/Build/Profile/Default
|
|||
$(call Image/Build/Profile/ALL5002,$(1))
|
||||
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
|
||||
$(call Image/Build/Profile/BC2,$(1))
|
||||
$(call Image/Build/Profile/BROADWAY,$(1))
|
||||
$(call Image/Build/Profile/CARAMBOLA,$(1))
|
||||
$(call Image/Build/Profile/DIR300B1,$(1))
|
||||
$(call Image/Build/Profile/DIR615H1,$(1))
|
||||
|
|
|
|||
|
|
@ -91,6 +91,7 @@ CONFIG_RT305X_MACH_ALL0256N=y
|
|||
CONFIG_RT305X_MACH_ALL5002=y
|
||||
CONFIG_RT305X_MACH_ARGUS_ATP52B=y
|
||||
CONFIG_RT305X_MACH_BC2=y
|
||||
CONFIG_RT305X_MACH_BROADWAY=y
|
||||
CONFIG_RT305X_MACH_CARAMBOLA=y
|
||||
CONFIG_RT305X_MACH_DAP_1350=y
|
||||
CONFIG_RT305X_MACH_DIR_300_REVB=y
|
||||
|
|
|
|||
|
|
@ -43,6 +43,7 @@ CONFIG_HAS_IOMEM=y
|
|||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAVE_ARCH_JUMP_LABEL=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_CLK=y
|
||||
CONFIG_HAVE_C_RECORDMCOUNT=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DMA_ATTRS=y
|
||||
|
|
@ -96,6 +97,7 @@ CONFIG_RT305X_MACH_ALL0256N=y
|
|||
CONFIG_RT305X_MACH_ALL5002=y
|
||||
CONFIG_RT305X_MACH_ARGUS_ATP52B=y
|
||||
CONFIG_RT305X_MACH_BC2=y
|
||||
CONFIG_RT305X_MACH_BROADWAY=y
|
||||
CONFIG_RT305X_MACH_CARAMBOLA=y
|
||||
CONFIG_RT305X_MACH_DAP_1350=y
|
||||
CONFIG_RT305X_MACH_DIR_300_REVB=y
|
||||
|
|
|
|||
|
|
@ -0,0 +1,19 @@
|
|||
#
|
||||
# Copyright (C) 2012 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
|
||||
define Profile/BROADWAY
|
||||
NAME:=Hauppauge Broadway
|
||||
PACKAGES:=\
|
||||
kmod-usb-core kmod-usb-rt305x-dwc_otg \
|
||||
kmod-ledtrig-usbdev restorefactory
|
||||
endef
|
||||
|
||||
define Profile/BROADWAY/Description
|
||||
Package set for Hauppauge Broadway
|
||||
endef
|
||||
|
||||
$(eval $(call Profile,BROADWAY))
|
||||
Loading…
Reference in New Issue