ralink: add support for dalink dcs930l ipcam

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38053
lede-17.01
John Crispin 2013-09-19 05:56:46 +00:00
parent 898c164b46
commit c0f6bf05f4
8 changed files with 140 additions and 1 deletions

View File

@ -27,7 +27,7 @@ get_status_led() {
d105)
status_led="d105:red:power"
;;
dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-610-a1 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1| dir-300-b7| dir-320-b1)
dcs-930 | dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-610-a1 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1| dir-300-b7| dir-320-b1)
status_led="d-link:green:status"
;;
dir-645)

View File

@ -68,6 +68,7 @@ case "$FIRMWARE" in
br6524n | \
carambola | \
d105 | \
dcs-930 | \
dir-300-b7 | \
dir-320-b1 | \
dir-610-a1 | \

View File

@ -43,6 +43,7 @@ ramips_setup_interfaces()
all5003 | \
awm002-evb | \
broadway | \
dcs-930| \
wnce2001)
ucidef_add_switch "switch0" "1" "0"
ucidef_set_interface_lan "eth0"

View File

@ -64,6 +64,9 @@ ramips_board_detect() {
*"Aztech HW550-3G")
name="hw550-3g"
;;
*"DCS-930")
name="dcs-930"
;;
*"DIR-300 B1")
name="dir-300-b1"
;;

View File

@ -29,6 +29,7 @@ platform_check_image() {
broadway | \
carambola | \
d105 | \
dcs-930 | \
dir-300-b1 | \
dir-300-b7 | \
dir-320-b1 | \

View File

@ -0,0 +1,118 @@
/dts-v1/;
/include/ "rt3050.dtsi"
/ {
compatible = "DCS-930", "ralink,rt3050-soc";
model = "D-Link DCS-930";
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
ralink,function = "gpio";
};
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x400000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
gpio-leds {
compatible = "gpio-leds";
wifi {
label = "d-link:red:alert";
gpios = <&gpio0 8 1>;
};
power {
label = "d-link:green:status";
gpios = <&gpio0 9 1>;
};
wps {
label = "d-link:blue:wps";
gpios = <&gpio0 13 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x101>;
};
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
};
esw@10110000 {
ralink,portmap = <0x2f>;
port@0 {
compatible = "swconfig,port";
swconfig,segment = "lan";
swconfig,portmap = <0 4>;
};
port@1 {
compatible = "swconfig,port";
swconfig,segment = "lan";
swconfig,portmap = <1 3>;
};
port@2 {
compatible = "swconfig,port";
swconfig,segment = "lan";
swconfig,portmap = <2 2>;
};
port@3 {
compatible = "swconfig,port";
swconfig,segment = "lan";
swconfig,portmap = <3 1>;
};
port@4 {
compatible = "swconfig,port";
swconfig,segment = "wan";
swconfig,portmap = <4 0>;
};
};
otg@101c0000 {
status = "okay";
};
};

View File

@ -357,6 +357,8 @@ Image/Build/Profile/DAP1350=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350,DAP-
Image/Build/Profile/DAP1350WW=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350WW,DAP-1350,RT3052-AP-DAP1350WW-3)
Image/Build/Profile/DCS930=$(call BuildFirmware/Default4M/$(1),$(1),dcs-930,DCS-930)
Image/Build/Profile/ESR-9753=$(call BuildFirmware/Default4M/$(1),$(1),esr-9753,ESR-9753)
Image/Build/Profile/HW550-3G=$(call BuildFirmware/Default8M/$(1),$(1),hw550-3g,HW550-3G)
@ -519,6 +521,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/DIR615H1,$(1))
$(call Image/Build/Profile/DAP1350,$(1))
$(call Image/Build/Profile/DAP1350WW,$(1))
$(call Image/Build/Profile/DCS930,$(1))
$(call Image/Build/Profile/ESR-9753,$(1))
$(call Image/Build/Profile/F7C027,$(1))
$(call Image/Build/Profile/F5D8235V2,$(1))

View File

@ -18,6 +18,18 @@ endef
$(eval $(call Profile,DIR615H1))
define Profile/DCS930
NAME:=Dlink DCS-930
PACKAGES:=kmod-video-core kmod-video-uvc \
kmod-usb-core kmod-usb-rt305x-dwc_otg
endef
define Profile/DCS930/Description
Package set for Dlink DCS-930 board
endef
$(eval $(call Profile,DCS930))
define Profile/DIR610A1
NAME:=Dlink DIR-610 A1
PACKAGES:=kmod-ledtrig-netdev kmod-ledtrig-timer