kernel: add pending e1000e fixes

The previous round of fixes for the 82574 chip cause an issue with
emulated e1000e devices in VMware ESXi 6.5. It also contains changes
that are not strictly necessary. These patches fix the issues introduced
in the previous series, revert the unnecessary changes to avoid
unforeseen fallout, and avoid a case where interrupts can be missed.

The final two patches of this series are already in the kernel, so no
need to include them here.

Patchwork: https://patchwork.ozlabs.org/cover/881776/

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit ef025e6417)
openwrt-18.06
Stijn Tintel 2018-06-28 11:44:10 +02:00
parent aeec1dd7ba
commit bd451d46a6
4 changed files with 331 additions and 0 deletions

View File

@ -0,0 +1,66 @@
From patchwork Mon Mar 5 21:40:25 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [net,v2,1/6] e1000e: Remove Other from EIAC
X-Patchwork-Submitter: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
X-Patchwork-Id: 881773
X-Patchwork-Delegate: davem@davemloft.net
Message-Id: <20180305214030.25141-2-jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Benjamin Poirier <bpoirier@suse.com>, netdev@vger.kernel.org,
nhorman@redhat.com, sassmann@redhat.com, jogreene@redhat.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Mon, 5 Mar 2018 13:40:25 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
List-Id: <netdev.vger.kernel.org>
From: Benjamin Poirier <bpoirier@suse.com>
It was reported that emulated e1000e devices in vmware esxi 6.5 Build
7526125 do not link up after commit 4aea7a5c5e94 ("e1000e: Avoid receiver
overrun interrupt bursts", v4.15-rc1). Some tracing shows that after
e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other()
on emulated e1000e devices. In comparison, on real e1000e 82574 hardware,
icr=0x80000004 (_INT_ASSERTED | _LSC) in the same situation.
Some experimentation showed that this flaw in vmware e1000e emulation can
be worked around by not setting Other in EIAC. This is how it was before
16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1).
Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1914,6 +1914,8 @@ static irqreturn_t e1000_msix_other(int
bool enable = true;
icr = er32(ICR);
+ ew32(ICR, E1000_ICR_OTHER);
+
if (icr & E1000_ICR_RXO) {
ew32(ICR, E1000_ICR_RXO);
enable = false;
@@ -2036,7 +2038,6 @@ static void e1000_configure_msix(struct
hw->hw_addr + E1000_EITR_82574(vector));
else
writel(1, hw->hw_addr + E1000_EITR_82574(vector));
- adapter->eiac_mask |= E1000_IMS_OTHER;
/* Cause Tx interrupts on every write back */
ivar |= BIT(31);
@@ -2261,7 +2262,7 @@ static void e1000_irq_enable(struct e100
if (adapter->msix_entries) {
ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
- ew32(IMS, adapter->eiac_mask | E1000_IMS_LSC);
+ ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
} else if (hw->mac.type >= e1000_pch_lpt) {
ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);
} else {

View File

@ -0,0 +1,84 @@
From patchwork Mon Mar 5 21:40:26 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [net, v2,
2/6] Partial revert "e1000e: Avoid receiver overrun interrupt bursts"
X-Patchwork-Submitter: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
X-Patchwork-Id: 881769
X-Patchwork-Delegate: davem@davemloft.net
Message-Id: <20180305214030.25141-3-jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Benjamin Poirier <bpoirier@suse.com>, netdev@vger.kernel.org,
nhorman@redhat.com, sassmann@redhat.com, jogreene@redhat.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Mon, 5 Mar 2018 13:40:26 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
List-Id: <netdev.vger.kernel.org>
From: Benjamin Poirier <bpoirier@suse.com>
This partially reverts commit 4aea7a5c5e940c1723add439f4088844cd26196d.
We keep the fix for the first part of the problem (1) described in the log
of that commit, that is to read ICR in the other interrupt handler. We
remove the fix for the second part of the problem (2), Other interrupt
throttling.
Bursts of "Other" interrupts may once again occur during rxo (receive
overflow) traffic conditions. This is deemed acceptable in the interest of
avoiding unforeseen fallout from changes that are not strictly necessary.
As discussed, the e1000e driver should be in "maintenance mode".
Link: https://www.spinics.net/lists/netdev/msg480675.html
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 16 ++--------------
1 file changed, 2 insertions(+), 14 deletions(-)
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1911,21 +1911,10 @@ static irqreturn_t e1000_msix_other(int
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
u32 icr;
- bool enable = true;
icr = er32(ICR);
ew32(ICR, E1000_ICR_OTHER);
- if (icr & E1000_ICR_RXO) {
- ew32(ICR, E1000_ICR_RXO);
- enable = false;
- /* napi poll will re-enable Other, make sure it runs */
- if (napi_schedule_prep(&adapter->napi)) {
- adapter->total_rx_bytes = 0;
- adapter->total_rx_packets = 0;
- __napi_schedule(&adapter->napi);
- }
- }
if (icr & E1000_ICR_LSC) {
ew32(ICR, E1000_ICR_LSC);
hw->mac.get_link_status = true;
@@ -1934,7 +1923,7 @@ static irqreturn_t e1000_msix_other(int
mod_timer(&adapter->watchdog_timer, jiffies + 1);
}
- if (enable && !test_bit(__E1000_DOWN, &adapter->state))
+ if (!test_bit(__E1000_DOWN, &adapter->state))
ew32(IMS, E1000_IMS_OTHER);
return IRQ_HANDLED;
@@ -2704,8 +2693,7 @@ static int e1000e_poll(struct napi_struc
napi_complete_done(napi, work_done);
if (!test_bit(__E1000_DOWN, &adapter->state)) {
if (adapter->msix_entries)
- ew32(IMS, adapter->rx_ring->ims_val |
- E1000_IMS_OTHER);
+ ew32(IMS, adapter->rx_ring->ims_val);
else
e1000_irq_enable(adapter);
}

View File

@ -0,0 +1,50 @@
From patchwork Mon Mar 5 21:40:27 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [net, v2,
3/6] e1000e: Fix queue interrupt re-raising in Other interrupt
X-Patchwork-Submitter: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
X-Patchwork-Id: 881775
X-Patchwork-Delegate: davem@davemloft.net
Message-Id: <20180305214030.25141-4-jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Benjamin Poirier <bpoirier@suse.com>, netdev@vger.kernel.org,
nhorman@redhat.com, sassmann@redhat.com, jogreene@redhat.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Mon, 5 Mar 2018 13:40:27 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
List-Id: <netdev.vger.kernel.org>
From: Benjamin Poirier <bpoirier@suse.com>
Restores the ICS write for Rx/Tx queue interrupts which was present before
commit 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1)
but was not restored in commit 4aea7a5c5e94
("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1).
This re-raises the queue interrupts in case the txq or rxq bits were set in
ICR and the Other interrupt handler read and cleared ICR before the queue
interrupt was raised.
Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1915,6 +1915,9 @@ static irqreturn_t e1000_msix_other(int
icr = er32(ICR);
ew32(ICR, E1000_ICR_OTHER);
+ if (icr & adapter->eiac_mask)
+ ew32(ICS, (icr & adapter->eiac_mask));
+
if (icr & E1000_ICR_LSC) {
ew32(ICR, E1000_ICR_LSC);
hw->mac.get_link_status = true;

View File

@ -0,0 +1,131 @@
From patchwork Mon Mar 5 21:40:28 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [net,v2,4/6] e1000e: Avoid missed interrupts following ICR read
X-Patchwork-Submitter: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
X-Patchwork-Id: 881771
X-Patchwork-Delegate: davem@davemloft.net
Message-Id: <20180305214030.25141-5-jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Benjamin Poirier <bpoirier@suse.com>, netdev@vger.kernel.org,
nhorman@redhat.com, sassmann@redhat.com, jogreene@redhat.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Mon, 5 Mar 2018 13:40:28 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
List-Id: <netdev.vger.kernel.org>
From: Benjamin Poirier <bpoirier@suse.com>
The 82574 specification update errata 12 states that interrupts may be
missed if ICR is read while INT_ASSERTED is not set. Avoid that problem by
setting all bits related to events that can trigger the Other interrupt in
IMS.
The Other interrupt is raised for such events regardless of whether or not
they are set in IMS. However, only when they are set is the INT_ASSERTED
bit also set in ICR.
By doing this, we ensure that INT_ASSERTED is always set when we read ICR
in e1000_msix_other() and steer clear of the errata. This also ensures that
ICR will automatically be cleared on read, therefore we no longer need to
clear bits explicitly.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/e1000e/defines.h | 21 ++++++++++++++++++++-
drivers/net/ethernet/intel/e1000e/netdev.c | 11 ++++-------
2 files changed, 24 insertions(+), 8 deletions(-)
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -400,6 +400,10 @@
#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
#define E1000_ICR_RXO 0x00000040 /* Receiver Overrun */
#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
+#define E1000_ICR_MDAC 0x00000200 /* MDIO Access Complete */
+#define E1000_ICR_SRPD 0x00010000 /* Small Receive Packet Detected */
+#define E1000_ICR_ACK 0x00020000 /* Receive ACK Frame Detected */
+#define E1000_ICR_MNG 0x00040000 /* Manageability Event Detected */
#define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */
/* If this bit asserted, the driver should claim the interrupt */
#define E1000_ICR_INT_ASSERTED 0x80000000
@@ -407,7 +411,7 @@
#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
#define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */
#define E1000_ICR_TXQ1 0x00800000 /* Tx Queue 1 Interrupt */
-#define E1000_ICR_OTHER 0x01000000 /* Other Interrupts */
+#define E1000_ICR_OTHER 0x01000000 /* Other Interrupt */
/* PBA ECC Register */
#define E1000_PBA_ECC_COUNTER_MASK 0xFFF00000 /* ECC counter mask */
@@ -431,12 +435,27 @@
E1000_IMS_RXSEQ | \
E1000_IMS_LSC)
+/* These are all of the events related to the OTHER interrupt.
+ */
+#define IMS_OTHER_MASK ( \
+ E1000_IMS_LSC | \
+ E1000_IMS_RXO | \
+ E1000_IMS_MDAC | \
+ E1000_IMS_SRPD | \
+ E1000_IMS_ACK | \
+ E1000_IMS_MNG)
+
/* Interrupt Mask Set */
#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
+#define E1000_IMS_RXO E1000_ICR_RXO /* Receiver Overrun */
#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */
+#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO Access Complete */
+#define E1000_IMS_SRPD E1000_ICR_SRPD /* Small Receive Packet */
+#define E1000_IMS_ACK E1000_ICR_ACK /* Receive ACK Frame Detected */
+#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability Event */
#define E1000_IMS_ECCER E1000_ICR_ECCER /* Uncorrectable ECC Error */
#define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */
#define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1910,16 +1910,12 @@ static irqreturn_t e1000_msix_other(int
struct net_device *netdev = data;
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- u32 icr;
-
- icr = er32(ICR);
- ew32(ICR, E1000_ICR_OTHER);
+ u32 icr = er32(ICR);
if (icr & adapter->eiac_mask)
ew32(ICS, (icr & adapter->eiac_mask));
if (icr & E1000_ICR_LSC) {
- ew32(ICR, E1000_ICR_LSC);
hw->mac.get_link_status = true;
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -1927,7 +1923,7 @@ static irqreturn_t e1000_msix_other(int
}
if (!test_bit(__E1000_DOWN, &adapter->state))
- ew32(IMS, E1000_IMS_OTHER);
+ ew32(IMS, E1000_IMS_OTHER | IMS_OTHER_MASK);
return IRQ_HANDLED;
}
@@ -2254,7 +2250,8 @@ static void e1000_irq_enable(struct e100
if (adapter->msix_entries) {
ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
- ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
+ ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER |
+ IMS_OTHER_MASK);
} else if (hw->mac.type >= e1000_pch_lpt) {
ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);
} else {