mirror of https://github.com/hak5/openwrt.git
ath79: add support for MikroTik RouterBOARD 493G (rb4xx series)
This patch adds support for the MikroTik RouterBOARD RB493G, ported from the ar71xx target. See https://routerboard.com/RB493G for details Specification: - SoC Qualcomm Atheros AR7161 - RAM: 256 MiB - Storage: 128MiB NAND - Ethernet: 9x 1000/100/10 Mbps - USB 1x 2.0 / 1.0 type A - PCIe: 3x Mini slot - MicroSD slot Working: - Board/system detection - Ethernet - SPI - NAND - LEDs - USB - Sysupgrade Enabled (but untested due to lack of hardware): - PCIe - ath79_pci_irq struct has the slot/pin/IRQ mappings if needed Installation methods: - tftp boot initramfs image, scp then flash via "sysupgrade -n" - nand boot existing OpenWrt, scp then flash via "sysupgrade -n" Notes: - initramfs image will not work if uncompressed image size over ~8.5Mb - The "rb4xx" drivers have been enabled Signed-off-by: Christopher Hill <ch6574@gmail.com>master
Christopher Hill
Adrian Schmutzler
parent
fa70b3a4bb
commit
b7a8a54542
|
|
@ -16,6 +16,7 @@ menu "Target Images"
|
|||
prompt "Compression"
|
||||
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_apm821xx
|
||||
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx
|
||||
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ath79_mikrotik
|
||||
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_lantiq
|
||||
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_mpc85xx
|
||||
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips
|
||||
|
|
|
|||
|
|
@ -0,0 +1,180 @@
|
|||
// SPDX-License-Identifier: GPL-1.0-or-later OR MIT
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "ar7100.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
led-boot = &led_user;
|
||||
led-failsafe = &led_user;
|
||||
led-running = &led_user;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_user: user {
|
||||
label = "mikrotik:yellow:user";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
led1 {
|
||||
label = "mikrotik:green:led1";
|
||||
gpios = <&cpld_gpio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led2 {
|
||||
label = "mikrotik:green:led2";
|
||||
gpios = <&cpld_gpio 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led3 {
|
||||
label = "mikrotik:green:led3";
|
||||
gpios = <&cpld_gpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led4 {
|
||||
label = "mikrotik:green:led4";
|
||||
gpios = <&cpld_gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led5 {
|
||||
label = "mikrotik:green:led5";
|
||||
gpios = <&cpld_gpio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
ngpios = <31>;
|
||||
gpio-line-names =
|
||||
"", "", "", "", "LED", "RDY", "", "MDC",
|
||||
"MDIO", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "", "", "", "";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
compatible = "mikrotik,rb4xx-spi";
|
||||
|
||||
flash@0 {
|
||||
compatible = "pm25lv512", "jedec,spi-nor";
|
||||
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "mikrotik,routerboot-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "routerboot1";
|
||||
reg = <0x0 0x0>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
hard_config {
|
||||
label = "hard_config";
|
||||
read-only;
|
||||
};
|
||||
|
||||
bios {
|
||||
label = "bios";
|
||||
size = <0x1000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
routerboot2 {
|
||||
label = "routerboot2";
|
||||
read-only;
|
||||
};
|
||||
|
||||
soft_config {
|
||||
label = "soft_config";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cpld@1 {
|
||||
compatible = "mikrotik,rb4xx-cpld";
|
||||
|
||||
reg = <1>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
cpld_gpio: gpio {
|
||||
compatible = "mikrotik,rb4xx-gpio";
|
||||
|
||||
base = <32>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-line-names =
|
||||
"LED1", "LED2", "LED3", "LED4",
|
||||
"FAN", "ALE", "CLE", "nCE",
|
||||
"LED5";
|
||||
};
|
||||
|
||||
nand {
|
||||
compatible = "mikrotik,rb4xx-nand";
|
||||
|
||||
gpios = <&cpld_gpio 5 GPIO_ACTIVE_HIGH>, // ALE
|
||||
<&cpld_gpio 6 GPIO_ACTIVE_HIGH>, // CLE
|
||||
<&cpld_gpio 7 GPIO_ACTIVE_HIGH>, // nCE
|
||||
<&gpio 5 GPIO_ACTIVE_HIGH>; // RDY
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "booter";
|
||||
reg = <0x0000000 0x0040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "kernel";
|
||||
reg = <0x0040000 0x0800000>;
|
||||
};
|
||||
|
||||
partition@840000 {
|
||||
label = "ubi";
|
||||
reg = <0x0840000 0x77c0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,53 @@
|
|||
// SPDX-License-Identifier: GPL-1.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "ar7100_mikrotik_routerboard-4xx.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "mikrotik,routerboard-493g", "qca,ar7161";
|
||||
model = "MikroTik RouterBOARD 493G";
|
||||
|
||||
aliases {
|
||||
mdio-gpio0 = &mdio_gpio0;
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
sdcard: mmc-slot@2 {
|
||||
compatible = "mmc-spi-slot";
|
||||
|
||||
reg = <2>;
|
||||
spi-max-frequency = <25000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
|
||||
phy-handle = <&gpio_phy0>;
|
||||
|
||||
mdio_gpio0: mdio-gpio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>, // MDC
|
||||
<&gpio 8 GPIO_ACTIVE_HIGH>; // MDIO
|
||||
|
||||
gpio_phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -1,5 +1,16 @@
|
|||
include ./common-mikrotik.mk
|
||||
|
||||
define Device/mikrotik_routerboard-493g
|
||||
$(Device/mikrotik)
|
||||
SOC := ar7161
|
||||
DEVICE_MODEL := RouterBOARD 493G
|
||||
IMAGE/sysupgrade.bin = append-kernel | kernel2minor -s 2048 -e -c | \
|
||||
sysupgrade-tar kernel=$$$$@ | append-metadata
|
||||
DEVICE_PACKAGES += kmod-usb-ohci kmod-usb2 nand-utils
|
||||
SUPPORTED_DEVICES += rb-493g
|
||||
endef
|
||||
TARGET_DEVICES += mikrotik_routerboard-493g
|
||||
|
||||
define Device/mikrotik_routerboard-922uags-5hpacd
|
||||
$(Device/mikrotik)
|
||||
SOC := qca9558
|
||||
|
|
|
|||
|
|
@ -8,6 +8,13 @@ ath79_setup_interfaces()
|
|||
local board="$1"
|
||||
|
||||
case "$board" in
|
||||
mikrotik,routerboard-493g)
|
||||
ucidef_set_interfaces_lan_wan "eth0.1 eth1.1" "eth0.2"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "1:lan:4" "2:lan:1" "3:lan:3" "4:lan:2" "5:wan"
|
||||
ucidef_add_switch "switch1" \
|
||||
"0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
|
||||
;;
|
||||
mikrotik,routerboard-922uags-5hpacd|\
|
||||
mikrotik,routerboard-wap-g-5hact2hnd)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
|
|
|
|||
|
|
@ -31,6 +31,7 @@ platform_do_upgrade() {
|
|||
local board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
mikrotik,routerboard-493g|\
|
||||
mikrotik,routerboard-922uags-5hpacd)
|
||||
platform_do_upgrade_mikrotik_nand "$1"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -2,16 +2,20 @@ CONFIG_AT803X_PHY=y
|
|||
CONFIG_CRC16=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_GPIO_LATCH=y
|
||||
CONFIG_GPIO_RB4XX=y
|
||||
CONFIG_GPIO_WATCHDOG=y
|
||||
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
|
||||
CONFIG_LEDS_RESET=y
|
||||
CONFIG_LZO_DECOMPRESS=y
|
||||
CONFIG_MDIO_GPIO=y
|
||||
CONFIG_MFD_RB4XX_CPLD=y
|
||||
CONFIG_MIKROTIK=y
|
||||
CONFIG_MIKROTIK_RB_SYSFS=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_AR934X=y
|
||||
CONFIG_MTD_NAND_CORE=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_RB4XX=y
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
CONFIG_MTD_ROUTERBOOT_PARTS=y
|
||||
CONFIG_MTD_SPI_NAND=y
|
||||
|
|
@ -24,10 +28,12 @@ CONFIG_MTD_UBI_BEB_LIMIT=20
|
|||
# CONFIG_MTD_UBI_FASTMAP is not set
|
||||
# CONFIG_MTD_UBI_GLUEBI is not set
|
||||
CONFIG_NET_SWITCHDEV=y
|
||||
CONFIG_PCI_AR71XX=y
|
||||
CONFIG_PHY_AR7100_USB=y
|
||||
CONFIG_PHY_AR7200_USB=y
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_SPI_RB4XX=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
||||
CONFIG_UBIFS_FS_LZO=y
|
||||
|
|
|
|||
Loading…
Reference in New Issue