mac80211: backport some upstream fixes

Backports the following upstream fixes:

mac80211: initialize fast-xmit 'info' later
mac80211: fix legacy and invalid rx-rate report
mac80211: fix tid_agg_rx NULL dereference

Compiled and tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
lede-17.01
Koen Vandeputte 2017-01-13 10:34:52 +01:00 committed by Felix Fietkau
parent 5b089e45a6
commit adf2fef5e8
3 changed files with 200 additions and 0 deletions

View File

@ -0,0 +1,60 @@
From a17d93ff3a950fefaea40e4a4bf3669b9137c533 Mon Sep 17 00:00:00 2001
From: Ben Greear <greearb@candelatech.com>
Date: Wed, 14 Dec 2016 11:30:38 -0800
Subject: [PATCH] mac80211: fix legacy and invalid rx-rate report
This fixes obtaining the rate info via sta_set_sinfo
when the rx rate is invalid (for instance, on IBSS
interface that has received no frames from one of its
peers).
Also initialize rinfo->flags for legacy rates, to not
rely on the whole sinfo being initialized to zero.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
net/mac80211/sta_info.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -1975,6 +1975,7 @@ static void sta_stats_decode_rate(struct
u16 brate;
unsigned int shift;
+ rinfo->flags = 0;
sband = local->hw.wiphy->bands[(rate >> 4) & 0xf];
brate = sband->bitrates[rate & 0xf].bitrate;
if (rinfo->bw == RATE_INFO_BW_5)
@@ -1990,14 +1991,15 @@ static void sta_stats_decode_rate(struct
rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI;
}
-static void sta_set_rate_info_rx(struct sta_info *sta, struct rate_info *rinfo)
+static int sta_set_rate_info_rx(struct sta_info *sta, struct rate_info *rinfo)
{
u16 rate = ACCESS_ONCE(sta_get_last_rx_stats(sta)->last_rate);
if (rate == STA_STATS_RATE_INVALID)
- rinfo->flags = 0;
- else
- sta_stats_decode_rate(sta->local, rate, rinfo);
+ return -EINVAL;
+
+ sta_stats_decode_rate(sta->local, rate, rinfo);
+ return 0;
}
static void sta_set_tidstats(struct sta_info *sta,
@@ -2202,8 +2204,8 @@ void sta_set_sinfo(struct sta_info *sta,
}
if (!(sinfo->filled & BIT(NL80211_STA_INFO_RX_BITRATE))) {
- sta_set_rate_info_rx(sta, &sinfo->rxrate);
- sinfo->filled |= BIT(NL80211_STA_INFO_RX_BITRATE);
+ if (sta_set_rate_info_rx(sta, &sinfo->rxrate) == 0)
+ sinfo->filled |= BIT(NL80211_STA_INFO_RX_BITRATE);
}
sinfo->filled |= BIT(NL80211_STA_INFO_TID_STATS);

View File

@ -0,0 +1,41 @@
From 35f432a03e41d3bf08c51ede917f94e2288fbe8c Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 2 Jan 2017 11:19:29 +0100
Subject: [PATCH] mac80211: initialize fast-xmit 'info' later
In ieee80211_xmit_fast(), 'info' is initialized to point to the skb
that's passed in, but that skb may later be replaced by a clone (if
it was shared), leading to an invalid pointer.
This can lead to use-after-free and also later crashes since the
real SKB's info->hw_queue doesn't get initialized properly.
Fix this by assigning info only later, when it's needed, after the
skb replacement (may have) happened.
Cc: stable@vger.kernel.org
Reported-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
net/mac80211/tx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -3297,7 +3297,7 @@ static bool ieee80211_xmit_fast(struct i
int extra_head = fast_tx->hdr_len - (ETH_HLEN - 2);
int hw_headroom = sdata->local->hw.extra_tx_headroom;
struct ethhdr eth;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_tx_info *info;
struct ieee80211_hdr *hdr = (void *)fast_tx->hdr;
struct ieee80211_tx_data tx;
ieee80211_tx_result r;
@@ -3361,6 +3361,7 @@ static bool ieee80211_xmit_fast(struct i
memcpy(skb->data + fast_tx->da_offs, eth.h_dest, ETH_ALEN);
memcpy(skb->data + fast_tx->sa_offs, eth.h_source, ETH_ALEN);
+ info = IEEE80211_SKB_CB(skb);
memset(info, 0, sizeof(*info));
info->band = fast_tx->band;
info->control.vif = &sdata->vif;

View File

@ -0,0 +1,99 @@
From 1c3d185a9a0b136a58e73b02912d593d0303d1da Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 18 Oct 2016 23:12:08 +0300
Subject: [PATCH] mac80211: fix tid_agg_rx NULL dereference
On drivers setting the SUPPORTS_REORDERING_BUFFER hardware flag,
we crash when the peer sends an AddBA request while we already
have a session open on the seame TID; this is because on those
drivers, the tid_agg_rx is left NULL even though the session is
valid, and the agg_session_valid bit is set.
To fix this, store the dialog tokens outside the tid_agg_rx to
be able to compare them to the received AddBA request.
Fixes: f89e07d4cf26 ("mac80211: agg-rx: refuse ADDBA Request with timeout update")
Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
net/mac80211/agg-rx.c | 8 ++------
net/mac80211/debugfs_sta.c | 2 +-
net/mac80211/sta_info.h | 4 ++--
3 files changed, 5 insertions(+), 9 deletions(-)
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -315,11 +315,7 @@ void __ieee80211_start_rx_ba_session(str
mutex_lock(&sta->ampdu_mlme.mtx);
if (test_bit(tid, sta->ampdu_mlme.agg_session_valid)) {
- tid_agg_rx = rcu_dereference_protected(
- sta->ampdu_mlme.tid_rx[tid],
- lockdep_is_held(&sta->ampdu_mlme.mtx));
-
- if (tid_agg_rx->dialog_token == dialog_token) {
+ if (sta->ampdu_mlme.tid_rx_token[tid] == dialog_token) {
ht_dbg_ratelimited(sta->sdata,
"updated AddBA Req from %pM on tid %u\n",
sta->sta.addr, tid);
@@ -396,7 +392,6 @@ void __ieee80211_start_rx_ba_session(str
}
/* update data */
- tid_agg_rx->dialog_token = dialog_token;
tid_agg_rx->ssn = start_seq_num;
tid_agg_rx->head_seq_num = start_seq_num;
tid_agg_rx->buf_size = buf_size;
@@ -418,6 +413,7 @@ end:
if (status == WLAN_STATUS_SUCCESS) {
__set_bit(tid, sta->ampdu_mlme.agg_session_valid);
__clear_bit(tid, sta->ampdu_mlme.unexpected_agg);
+ sta->ampdu_mlme.tid_rx_token[tid] = dialog_token;
}
mutex_unlock(&sta->ampdu_mlme.mtx);
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -205,7 +205,7 @@ static ssize_t sta_agg_status_read(struc
p += scnprintf(p, sizeof(buf) + buf - p, "%02d", i);
p += scnprintf(p, sizeof(buf) + buf - p, "\t\t%x", !!tid_rx);
p += scnprintf(p, sizeof(buf) + buf - p, "\t%#.2x",
- tid_rx ? tid_rx->dialog_token : 0);
+ tid_rx ? sta->ampdu_mlme.tid_rx_token[i] : 0);
p += scnprintf(p, sizeof(buf) + buf - p, "\t%#.3x",
tid_rx ? tid_rx->ssn : 0);
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -184,7 +184,6 @@ struct tid_ampdu_tx {
* @ssn: Starting Sequence Number expected to be aggregated.
* @buf_size: buffer size for incoming A-MPDUs
* @timeout: reset timer value (in TUs).
- * @dialog_token: dialog token for aggregation session
* @rcu_head: RCU head used for freeing this struct
* @reorder_lock: serializes access to reorder buffer, see below.
* @auto_seq: used for offloaded BA sessions to automatically pick head_seq_and
@@ -213,7 +212,6 @@ struct tid_ampdu_rx {
u16 ssn;
u16 buf_size;
u16 timeout;
- u8 dialog_token;
bool auto_seq;
bool removed;
};
@@ -225,6 +223,7 @@ struct tid_ampdu_rx {
* to tid_tx[idx], which are protected by the sta spinlock)
* tid_start_tx is also protected by sta->lock.
* @tid_rx: aggregation info for Rx per TID -- RCU protected
+ * @tid_rx_token: dialog tokens for valid aggregation sessions
* @tid_rx_timer_expired: bitmap indicating on which TIDs the
* RX timer expired until the work for it runs
* @tid_rx_stop_requested: bitmap indicating which BA sessions per TID the
@@ -243,6 +242,7 @@ struct sta_ampdu_mlme {
struct mutex mtx;
/* rx */
struct tid_ampdu_rx __rcu *tid_rx[IEEE80211_NUM_TIDS];
+ u8 tid_rx_token[IEEE80211_NUM_TIDS];
unsigned long tid_rx_timer_expired[BITS_TO_LONGS(IEEE80211_NUM_TIDS)];
unsigned long tid_rx_stop_requested[BITS_TO_LONGS(IEEE80211_NUM_TIDS)];
unsigned long agg_session_valid[BITS_TO_LONGS(IEEE80211_NUM_TIDS)];