mediatek: add U-Boot build for UniElec U7623

Patches submitted upstream at
https://patchwork.ozlabs.org/project/uboot/list/?series=189178

Tested on Banana Pi R2 and U7623-06.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
master
David Woodhouse 2020-07-13 10:37:28 +01:00 committed by Chuanhong Guo
parent ff8cc137fb
commit ad295e0ee8
4 changed files with 391 additions and 7 deletions

View File

@ -15,18 +15,18 @@ define U-Boot/Default
DEFAULT:=y
endef
define U-Boot/mt7629
NAME:=MT7629
BUILD_SUBTARGET:=mt7629
UBOOT_CONFIG:=mt7629_rfb
endef
define U-Boot/mt7622
NAME:=MT7622
BUILD_SUBTARGET:=mt7622
UBOOT_CONFIG:=mt7622_rfb
endef
define U-Boot/mt7623a_unielec_u7623
NAME:=UniElec U7623 (mt7623)
BUILD_SUBTARGET:=mt7623
UBOOT_CONFIG:=mt7623a_unielec_u7623_02
endef
define U-Boot/mt7623n_bpir2
NAME:=Banana Pi R2 (mt7623)
BUILD_SUBTARGET:=mt7623
@ -34,7 +34,13 @@ define U-Boot/mt7623n_bpir2
UBOOT_CONFIG:=mt7623n_bpir2
endef
UBOOT_TARGETS := mt7629 mt7622 mt7623n_bpir2
define U-Boot/mt7629
NAME:=MT7629
BUILD_SUBTARGET:=mt7629
UBOOT_CONFIG:=mt7629_rfb
endef
UBOOT_TARGETS := mt7629 mt7622 mt7623n_bpir2 mt7623a_unielec_u7623
UBOOT_MAKE_FLAGS += $(UBOOT_IMAGE)

View File

@ -0,0 +1,51 @@
From b0d1b85fb25a28a9532eaa9dda064b40a0e25f25 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Sun, 12 Jul 2020 23:19:09 +0100
Subject: [PATCH 1/3] board: mediatek: fix mmc_get_boot_dev() for platforms
without external SD
On the UniElec U7623 board there is no external SD slot and the preloader
doesn't fill in the magic field at 0x81dffff0 to indicate that it was
booted from eMMC.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
board/mediatek/mt7623/mt7623_rfb.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/board/mediatek/mt7623/mt7623_rfb.c b/board/mediatek/mt7623/mt7623_rfb.c
index 4ec2764976..984e75ccaf 100644
--- a/board/mediatek/mt7623/mt7623_rfb.c
+++ b/board/mediatek/mt7623/mt7623_rfb.c
@@ -4,6 +4,7 @@
*/
#include <common.h>
+#include <mmc.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -15,10 +16,15 @@ int board_init(void)
return 0;
}
+#ifdef CONFIG_MMC
int mmc_get_boot_dev(void)
{
int g_mmc_devid = -1;
char *uflag = (char *)0x81DFFFF0;
+
+ if (!find_mmc_device(1))
+ return 0;
+
if (strncmp(uflag,"eMMC",4)==0) {
g_mmc_devid = 0;
printf("Boot From Emmc(id:%d)\n\n", g_mmc_devid);
@@ -33,3 +39,4 @@ int mmc_get_env_dev(void)
{
return mmc_get_boot_dev();
}
+#endif
--
2.26.2

View File

@ -0,0 +1,310 @@
From d13abe5b2c5b85228bdd34584fcbd642f1883668 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Sun, 12 Jul 2020 23:23:05 +0100
Subject: [PATCH 3/3] board: mediatek: Add support for UniElec U7623 board
This is an MT7623A-based board, very similar to the Banana Pi R2.
http://www.unielecinc.com/q/news/cn/p/product/detail.html?qd_guid=OjXwKCaRlN
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
arch/arm/dts/Makefile | 1 +
.../arm/dts/mt7623a-unielec-u7623-02-emmc.dts | 211 ++++++++++++++++++
configs/mt7623a_unielec_u7623_02_defconfig | 54 +++++
3 files changed, 266 insertions(+)
create mode 100644 arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts
create mode 100644 configs/mt7623a_unielec_u7623_02_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 89fa448818..a140b1c8d4 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -938,6 +938,7 @@ dtb-$(CONFIG_SOC_K3_J721E) += k3-j721e-common-proc-board.dtb \
dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt7622-rfb.dtb \
+ mt7623a-unielec-u7623-02-emmc.dtb \
mt7623n-bananapi-bpi-r2.dtb \
mt7629-rfb.dtb \
mt8512-bm1-emmc.dtb \
diff --git a/arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts b/arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts
new file mode 100644
index 0000000000..fdeec75b05
--- /dev/null
+++ b/arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts
@@ -0,0 +1,211 @@
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include "mt7623.dtsi"
+#include "mt7623-u-boot.dtsi"
+
+/ {
+ model = "UniElec U7623-02 eMMC";
+ compatible = "unielec,u7623-02-emmc", "mediatek,mt7623";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x20000000>;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ tick-timer = &timer0;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led3 {
+ label = "u7623-01:green:led3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led4 {
+ label = "u7623-01:green:led4";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+};
+
+&eth {
+ status = "okay";
+ mediatek,gmac-id = <0>;
+ phy-mode = "rgmii";
+ mediatek,switch = "mt7530";
+ mediatek,mcm;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_default>;
+ status = "okay";
+ bus-width = <8>;
+ max-frequency = <50000000>;
+ cap-mmc-highspeed;
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_1p8v>;
+ non-removable;
+};
+
+&pinctrl {
+ ephy_default: ephy_default {
+ mux {
+ function = "eth";
+ groups = "mdc_mdio", "ephy";
+ };
+
+ conf {
+ pins = "G2_TXEN", "G2_TXD0", "G2_TXD1", "G2_TXD2",
+ "G2_TXD3", "G2_TXC", "G2_RXC", "G2_RXD0",
+ "G2_RXD1", "G2_RXD2", "G2_RXD3", "G2_RXDV",
+ "MDC", "MDIO";
+ drive-strength = <12>;
+ mediatek,tdsel = <5>;
+ };
+ };
+
+ mmc0_pins_default: mmc0default {
+ mux {
+ function = "msdc";
+ groups = "msdc0";
+ };
+
+ conf-cmd-data {
+ pins = "MSDC0_CMD", "MSDC0_DAT0", "MSDC0_DAT1",
+ "MSDC0_DAT2", "MSDC0_DAT3", "MSDC0_DAT4",
+ "MSDC0_DAT5", "MSDC0_DAT6", "MSDC0_DAT7";
+ input-enable;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "MSDC0_CLK";
+ bias-pull-down;
+ };
+
+ conf-rst {
+ pins = "MSDC0_RSTB";
+ bias-pull-up;
+ };
+ };
+
+ pcie_default: pcie-default {
+ mux {
+ function = "pcie";
+ groups = "pcie0_0_perst", "pcie1_0_perst";
+ };
+ };
+
+ uart0_pins_a: uart0-default {
+ mux {
+ function = "uart";
+ groups = "uart0_0_txd_rxd";
+ };
+ };
+
+ uart1_pins_a: uart1-default {
+ mux {
+ function = "uart";
+ groups = "uart1_0_txd_rxd";
+ };
+ };
+
+ uart2_pins_a: uart2-default {
+ mux {
+ function = "uart";
+ groups = "uart2_0_txd_rxd";
+ };
+ };
+
+ uart2_pins_b: uart2-alt {
+ mux {
+ function = "uart";
+ groups = "uart2_1_txd_rxd";
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_default>;
+ status = "okay";
+
+ pcie@0,0 {
+ status = "okay";
+ };
+
+ pcie@1,0 {
+ status = "okay";
+ };
+};
+
+&pcie0_phy {
+ status = "okay";
+};
+
+&pcie1_phy {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_a>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins_b>;
+ status = "okay";
+};
diff --git a/configs/mt7623a_unielec_u7623_02_defconfig b/configs/mt7623a_unielec_u7623_02_defconfig
new file mode 100644
index 0000000000..72b5f31092
--- /dev/null
+++ b/configs/mt7623a_unielec_u7623_02_defconfig
@@ -0,0 +1,54 @@
+CONFIG_ARM=y
+CONFIG_SYS_THUMB_BUILD=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_SYS_TEXT_BASE=0x81e00000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ENV_SIZE=0x1000
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_TARGET_MT7623=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_BOOTDELAY=3
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_DEFAULT_FDT_FILE="mt7623a-unielec-u7623-02-emmc.dtb"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_CMD_BOOTMENU=y
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_READ=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_DEFAULT_DEVICE_TREE="mt7623a-unielec-u7623-02-emmc"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CLK=y
+CONFIG_DM_MMC=y
+# CONFIG_MMC_QUIRKS is not set
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_MMC_MTK=y
+CONFIG_PHY_FIXED=y
+CONFIG_DM_ETH=y
+CONFIG_MEDIATEK_ETH=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_MT7623=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MTK_POWER_DOMAIN=y
+CONFIG_DM_SERIAL=y
+CONFIG_MTK_SERIAL=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_TIMER=y
+CONFIG_MTK_TIMER=y
+CONFIG_WDT_MTK=y
+CONFIG_LZMA=y
--
2.26.2

View File

@ -0,0 +1,17 @@
diff --git a/configs/mt7623n_bpir2_defconfig b/configs/mt7623n_bpir2_defconfig
index 6b9fbd7e22..fb2a004803 100644
--- a/configs/mt7623a_unielec_u7623_02_defconfig
+++ b/configs/mt7623a_unielec_u7623_02_defconfig
@@ -52,3 +52,12 @@ CONFIG_TIMER=y
CONFIG_MTK_TIMER=y
CONFIG_WDT_MTK=y
CONFIG_LZMA=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_OF_LIBFDT_OVERLAY=y
+#enables savenenv-command
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_FAT_INTERFACE="mmc"
+CONFIG_ENV_FAT_DEVICE_AND_PART="0:2"
+CONFIG_ENV_FAT_FILE="uboot.env"
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_SETEXPR=y