demistifying make *clean targets, fix some clean targets issues

SVN-Revision: 272

openwrt/Makefile

@@ -27,8 +27,7 @@ CONFIG_DEFCONFIG = .defconfig
 CONFIG = package/config
 
 noconfig_targets := menuconfig config oldconfig randconfig \
-	defconfig allyesconfig allnoconfig clean distclean \
+	defconfig allyesconfig allnoconfig release tags
-	release tags
 
 # Pull in the user's configuration file
 ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
@@ -127,17 +126,17 @@ source: $(TARGETS_SOURCE)
 # Cleanup and misc junk
 #
 #############################################################
-clean: $(TARGETS_CLEAN)
+clean: 
-	rm -rf $(STAGING_DIR) $(TARGET_DIR) $(IMAGE)
+	rm -rf $(TARGET_DIR) $(IMAGE).*
+	$(MAKE) $(DIST)-image-clean
 
 dirclean: $(TARGETS_DIRCLEAN)
-	rm -rf $(STAGING_DIR) $(TARGET_DIR) $(IMAGE)
+	rm -rf $(TARGET_DIR) $(IMAGE).*
+	$(MAKE) $(DIST)-image-clean
 
-distclean:
+distclean: clean
-	rm -rf $(DL_DIR) $(BUILD_DIR) $(LINUX_KERNEL) $(IMAGE)
+	rm -rf $(DL_DIR) $(BUILD_DIR) $(TOOL_BUILD_DIR) 
-
+	rm .config* .tmpconfig.h
-cleanall:
-	rm -rf $(DL_DIR) $(BUILD_DIR) $(LINUX_KERNEL) $(IMAGE) $(TOOL_BUILD_DIR)
 
 sourceball:
 	rm -rf $(BUILD_DIR)
@@ -194,8 +193,8 @@ defconfig: $(CONFIG)/conf
 # Cleanup and misc junk
 #
 #############################################################
-clean: 
+clean:
-	- $(MAKE) -C $(CONFIG) clean
+	@$(MAKE) -C $(CONFIG) clean
 
 distclean: clean
 
@@ -204,4 +203,3 @@ endif # ifeq ($(strip $(BR2_HAVE_DOT_CONFIG)),y)
 .PHONY: dummy subdirs release distclean clean config oldconfig \
 	menuconfig tags check test depend
 
-

openwrt/README

@@ -0,0 +1,29 @@
+This is the buildsystem for the OpenWrt Linux Distribution
+It is a modified uClibc buildroot2.
+
+Please use "make menuconfig" to configure your appreciated
+configuration for the toolchain and firmware.
+
+Simply running 'make' will build your firmware and a tarball
+of kernel modules. It will download all sources, build the 
+cross-compile toolchain, the kernel and all choosen applications.
+
+You can use flash.sh for remotely updating your embedded system
+via tftp.
+
+
+There are some cleanup targets we would like to explain.
+"make clean" will only clean the firmware images and the root
+filesystem. "make dirclean" will remove the extracted kernel source
+and all exctracted software. (busybox,bridge-utils,..), but will
+preserve your toolchain. (compiler,linker,..)
+"make distclean" will remove everything, including the toolchain, 
+all downloaded source code archives and your firmware configuration. 
+You can cleanup separate directories by using "make application-dirclean" 
+and rebuild the firmware with "make".
+
+Be happy..
+	Your OpenWRT Project
+	http://www.openwrt.org
+
+

openwrt/package/linux/linux.config

@@ -86,7 +86,7 @@ CONFIG_BCM4704=y
 # CONFIG_HIGHMEM is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
 CONFIG_PCI=y
 CONFIG_NONCOHERENT_IO=y
 CONFIG_NEW_TIME_C=y

openwrt/package/linux/linux.mk

@@ -57,6 +57,12 @@ endif
 
 $(LINUX_DIR)/.configured:  $(LINUX_DIR)/.patched
 	-cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config
+ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS_LZMA),y)
+	$(SED) "s,rootfstype=jffs2,rootfstype=squashfs," $(LINUX_DIR)/.config
+endif
+ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS),y)
+	$(SED) "s,rootfstype=jffs2,rootfstype=squashfs," $(LINUX_DIR)/.config
+endif
 	$(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/Makefile
 	$(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/arch/mips/Makefile
 	$(SED) "s,\-mcpu=,\-mtune=,g;" $(LINUX_DIR)/arch/mips/Makefile

openwrt/package/sed/sed.mk

@@ -69,7 +69,6 @@ use-sed-host-binary:
 host-sed: $(HOST_SED_TARGET)
 
 host-sed-clean:
-	$(MAKE) DESTDIR=$(STAGING_DIR) -C $(SED_DIR1) uninstall
 	-$(MAKE) -C $(SED_DIR1) clean
 
 host-sed-dirclean:
@@ -127,7 +126,6 @@ sed-target_binary: $(SED_DIR2)/$(SED_BINARY)
 sed: uclibc sed-target_binary
 
 sed-clean:
-	$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(SED_DIR2) uninstall
 	-$(MAKE) -C $(SED_DIR2) clean
 
 sed-dirclean:

openwrt/target/Makefile.in

@@ -1,17 +1,20 @@
 # Default target skeleton stuff, may be overridden
+DIST=openwrt
 TARGET_SKELETON=target/default/skel.tar.gz
 TARGET_SKEL_DIR=target/default/target_skeleton
 
 include target/device/Makefile.in
 
-openwrt-linux.trx: openwrt-trx
+$(DIST)-linux.trx: openwrt-trx
-	PATH=$(TARGET_PATH) trx -o openwrt-linux.trx $(LINUX_DIR)/$(LINUX_BINLOC) $(IMAGE).$(ROOTFS)
+	PATH=$(TARGET_PATH) trx -o $(DIST)-linux.trx $(LINUX_DIR)/$(LINUX_BINLOC) $(IMAGE).$(ROOTFS)
 
-openwrt-gs-code.bin: openwrt-addpattern openwrt-linux.trx
+$(DIST)-gs-code.bin: openwrt-addpattern $(DIST)-linux.trx
-	PATH=$(TARGET_PATH) addpattern -2 -i  openwrt-linux.trx -o openwrt-gs-code.bin -g
+	PATH=$(TARGET_PATH) addpattern -2 -i  $(DIST)-linux.trx -o $(DIST)-gs-code.bin -g
 
-openwrt-g-code.bin: openwrt-gs-code.bin
+$(DIST)-g-code.bin: $(DIST)-gs-code.bin
-	sed -e "1s,^W54S,W54G," < openwrt-gs-code.bin > openwrt-g-code.bin
+	sed -e "1s,^W54S,W54G," < $(DIST)-gs-code.bin > $(DIST)-g-code.bin
 
-openwrt-image:	openwrt openwrt-g-code.bin
+openwrt-image:	openwrt $(DIST)-g-code.bin
 
+$(DIST)-image-clean:
+	@-rm $(DIST)-* 2>/dev/null

openwrt/toolchain/binutils/binutils.mk

@@ -79,7 +79,7 @@ binutils-clean:
 	rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
 	-$(MAKE) -C $(BINUTILS_DIR1) clean
 
-binutils-dirclean:
+binutils-toolclean:
 	rm -rf $(BINUTILS_DIR1)
 
 
@@ -130,5 +130,5 @@ binutils_target-clean:
 	rm -f $(TARGET_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
 	-$(MAKE) -C $(BINUTILS_DIR2) clean
 
-binutils_target-dirclean:
+binutils_target-toolclean:
 	rm -rf $(BINUTILS_DIR2)

openwrt/toolchain/ccache/ccache.mk

@@ -83,7 +83,7 @@ ccache-clean:
 	$(MAKE) -C $(CCACHE_DIR1) uninstall
 	-$(MAKE) -C $(CCACHE_DIR1) clean
 
-ccache-dirclean:
+ccache-toolclean:
 	rm -rf $(CCACHE_DIR1)
 
 
@@ -147,5 +147,5 @@ ccache_target-clean:
 	rm -f $(TARGET_DIR)/$(CCACHE_TARGET_BINARY)
 	-$(MAKE) -C $(CCACHE_DIR2) clean
 
-ccache_target-dirclean:
+ccache_target-toolclean:
 	rm -rf $(CCACHE_DIR2)

openwrt/toolchain/gcc/gcc-uclibc-3.x.mk

@@ -127,7 +127,7 @@ gcc_initial-clean:
 	rm -rf $(GCC_BUILD_DIR1)
 	rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
 
-gcc_initial-dirclean:
+gcc_initial-toolclean:
 	rm -rf $(GCC_BUILD_DIR1)
 
 #############################################################
@@ -225,7 +225,7 @@ gcc-clean:
 	rm -rf $(GCC_BUILD_DIR2)
 	rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
 
-gcc-dirclean:
+gcc-toolclean:
 	rm -rf $(GCC_BUILD_DIR2)
 
 #############################################################
@@ -315,7 +315,7 @@ gcc_target-clean:
 	rm -rf $(GCC_BUILD_DIR3)
 	rm -f $(TARGET_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)*
 
-gcc_target-dirclean:
+gcc_target-toolclean:
 	rm -rf $(GCC_BUILD_DIR3)
 
 endif

openwrt/toolchain/kernel-headers/kernel-headers.mk

@@ -40,5 +40,5 @@ kernel-headers-source: $(DL_DIR)/$(LINUX_HEADERS_SOURCE)
 kernel-headers-clean: clean
 	rm -rf $(LINUX_HEADERS_DIR)
 
-kernel-headers-dirclean:
+kernel-headers-toolclean:
 	rm -rf $(LINUX_HEADERS_DIR)

openwrt/toolchain/uClibc/uclibc.mk

@@ -137,7 +137,7 @@ uclibc-clean:
 	-$(MAKE1) -C $(UCLIBC_DIR) clean
 	rm -f $(UCLIBC_DIR)/.config
 
-uclibc-dirclean:
+uclibc-toolclean:
 	rm -rf $(UCLIBC_DIR)
 
 uclibc-target-utils: $(TARGET_DIR)/usr/bin/ldd