missing patch & config file

SVN-Revision: 20604
lede-17.01
Ralph Hempel 2010-03-30 13:51:10 +00:00
parent 360c8146b4
commit aa323e0134
2 changed files with 9381 additions and 0 deletions

View File

@ -0,0 +1,32 @@
config UBOOT_CONFIG
string "configuration file"
default "easy50712_DDR166M"
help
The configuration reflects the settings for a dedicated board hardware.
Select for Danube evaluation board easy50712_DDR166M .
Select for AR9 evaluation board easy50812_DDR166M .
config UBOOT_DDR_CONFIG
string "DDR configuration file"
default "danube_ref_ddr166.conf"
depends on UBOOT_RAMBOOT
help
The DDR configuration file should reflect the DDR memory device configuration .
It will be used to create a RAM boot image
Select for Danube evalution board danube_ref_ddr166.conf .
Select for AR9 evalution board easy50812.conf .
config UBOOT_RAMBOOT
bool "Enable RAM boot image"
help
Using the UART boot mode of the ROM code this image could be loaded to the RAM.
Executing the image in the RAM the functionality of the uboot image can be
tested first without touching the original flash.
Note: Be carefull, by saving the environment the flash will be modified.
The OWRT flash layout differs from the layout provided by Lantiq / Infineon.
config IFXMIPS_UBOOT_A800
bool "add ARV452 Switch bringup hack"
depends on PACKAGE_uboot-ifxmips
help
Say Y, if you have a arv452 board (wav-281, A800, ..)

File diff suppressed because it is too large Load Diff