brcm63xx: add support for Huawei HG622

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48305
lede-17.01
Jonas Gorski 2016-01-18 10:47:23 +00:00
parent 25ce154605
commit a78bb9590f
11 changed files with 240 additions and 0 deletions

View File

@ -39,6 +39,9 @@ hg556a_*)
ucidef_set_led_netdev "lan" "LAN" "HW556:red:dsl" "eth0"
ucidef_set_led_usbdev "usb" "USB" "HW556:red:hspa" "1-2"
;;
hg622)
ucidef_set_led_usbdev "usb" "USB" "HG622:green:usb" "1-2"
;;
hg655b)
ucidef_set_led_usbdev "usb" "USB" "HW65x:green:usb" "1-2"
;;

View File

@ -86,6 +86,7 @@ dsl-274xb-f |\
dsl-275xb-d |\
fast2504n |\
fast2704v2 |\
hg622 |\
hg655b |\
p870hw-51a_v2 |\
r5010un_v2 |\

View File

@ -34,6 +34,7 @@ case "$FIRMWARE" in
hg556a_c)
rt2x00_eeprom_extract "cal_data" 130560 512
;;
hg622 |\
hg655b)
rt2x00_eeprom_extract "cal_data" 0 512
;;

View File

@ -21,6 +21,7 @@ case "$(brcm63xx_board_name)" in
cpva642 |\
ct-6373 |\
dsl-274xb-f |\
hg622 |\
magic |\
p870hw-51a_v2 |\
r5010un_v2 |\

View File

@ -159,6 +159,9 @@ brcm63xx_dt_detect() {
"Huawei EchoLife HG556a (version C)")
board_name="hg556a_c"
;;
"Huawei HG622")
board_name="hg622"
;;
"Huawei HG655b")
board_name="hg655b"
;;

View File

@ -23,6 +23,7 @@ set_preinit_iface() {
hg553 |\
hg556a_* |\
hg520 |\
hg622 |\
neufbox6 |\
p870hw-51a_v2 |\
rta770bw |\

View File

@ -0,0 +1,74 @@
/dts-v1/;
#include "bcm6368.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Huawei HG622";
compatible = "huawei,hg622", "brcm,bcm6368";
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
reset {
label = "reset";
gpios = <&gpio1 2 1>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
dsl_green {
label = "HG622:green:dsl";
gpios = <&gpio0 2 1>;
};
inet_green {
label = "HG622:green:inet";
gpios = <&gpio0 5 1>;
};
usb_green {
label = "HG622:green:usb";
gpios = <&gpio0 11 1>;
};
power_green {
label = "HG622:green:power";
gpios = <&gpio0 22 1>;
default-state = "on";
};
};
};
&pflash {
status = "ok";
linux,part-probe = "bcm63xxpart";
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
linux@20000 {
label = "linux";
reg = <0x020000 0xf80000>;
};
cal_data@fa0000 {
label = "cal_data";
reg = <0xfa0000 0x020000>;
read-only;
};
nvram@fe0000 {
label = "nvram";
reg = <0xfe0000 0x020000>;
};
};

View File

@ -575,6 +575,8 @@ $(eval $(call bcm63xxCfe,HG553,HG553,hg553,HW553,6358,--rsa-signature "EchoLife_
$(eval $(call bcm63xxCfe,HG556a_AB,HG556a_A,hg556a-a,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x10000 --tag-version 8))
$(eval $(call bcm63xxCfe,HG556a_AB,HG556a_B,hg556a-b,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x20000 --tag-version 8))
$(eval $(call bcm63xxCfe,HG556a_C,HG556a_C,hg556a-c,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x20000 --tag-version 8))
# Huawei HG622
$(eval $(call bcm63xxCfe,HG622,HG622,hg622,96368MVWG_hg622,6368,--image-offset 0x20000 --block-size 0x20000 --tag-version 7 --pad 8))
# Huawei HG655b
$(eval $(call bcm63xxCfe,HG655b,HG655b,hg655b,HW65x,6368,--image-offset 0x20000 --tag-version 7 --pad 4))
# Inteno VG50

View File

@ -0,0 +1,72 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -2057,6 +2057,53 @@ static struct board_info __initdata boar
},
};
+static struct board_info __initdata board_HG622 = {
+ .name = "96368MVWG_hg622",
+ .expected_cpu_id = 0x6368,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 2,
+
+ .has_caldata = 1,
+ .caldata = {
+ {
+ .vendor = PCI_VENDOR_ID_RALINK,
+ .caldata_offset = 0xfa0000,
+ .slot = 1,
+ .eeprom = "rt2x00.eeprom",
+ },
+ },
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "port1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "port2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "port3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "port4",
+ },
+ },
+ },
+};
+
static struct sprom_fixup __initdata vr3025u_fixups[] = {
{ .offset = 97, .value = 0xfeb3 },
{ .offset = 98, .value = 0x1618 },
@@ -2563,6 +2610,7 @@ static const struct board_info __initcon
&board_96368mvwg,
&board_96368mvngr,
&board_DGND3700v1_3800B,
+ &board_HG622,
&board_HG655b,
&board_P870HW51A_V2,
&board_VR3025u,
@@ -2671,6 +2719,7 @@ static struct of_device_id const bcm963x
{ .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
{ .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ { .compatible = "huawei,hg622", .data = &board_HG622, },
{ .compatible = "huawei,hg655b", .data = &board_HG655b, },
{ .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
{ .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },

View File

@ -0,0 +1,72 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -2057,6 +2057,53 @@ static struct board_info __initdata boar
},
};
+static struct board_info __initdata board_HG622 = {
+ .name = "96368MVWG_hg622",
+ .expected_cpu_id = 0x6368,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 2,
+
+ .has_caldata = 1,
+ .caldata = {
+ {
+ .vendor = PCI_VENDOR_ID_RALINK,
+ .caldata_offset = 0xfa0000,
+ .slot = 1,
+ .eeprom = "rt2x00.eeprom",
+ },
+ },
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "port1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "port2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "port3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "port4",
+ },
+ },
+ },
+};
+
static struct sprom_fixup __initdata vr3025u_fixups[] = {
{ .offset = 97, .value = 0xfeb3 },
{ .offset = 98, .value = 0x1618 },
@@ -2563,6 +2610,7 @@ static const struct board_info __initcon
&board_96368mvwg,
&board_96368mvngr,
&board_DGND3700v1_3800B,
+ &board_HG622,
&board_HG655b,
&board_P870HW51A_V2,
&board_VR3025u,
@@ -2671,6 +2719,7 @@ static struct of_device_id const bcm963x
{ .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
{ .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ { .compatible = "huawei,hg622", .data = &board_HG622, },
{ .compatible = "huawei,hg655b", .data = &board_HG655b, },
{ .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
{ .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },

View File

@ -44,6 +44,16 @@ define Profile/HG556a_C/Description
endef
$(eval $(call Profile,HG556a_C))
define Profile/HG622
NAME:=Huawei HG622
PACKAGES:=kmod-rt2800-pci wpad-mini \
kmod-usb2 kmod-usb-ohci kmod-ledtrig-usbdev
endef
define Profile/HG622/Description
Package set optimized for Huawei HG622.
endef
$(eval $(call Profile,HG622))
define Profile/HG655b
NAME:=Huawei HG655b
PACKAGES:=kmod-rt2800-pci wpad-mini \