ramips: add support for ZBT-WE1226

MT7628NN (580MHz), 8MB SPI NOR, 64MB DDR2 RAM

Everything except for the switch LEDs works great.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
openwrt-18.06
Daniel Golle 2018-01-23 02:46:36 +01:00
parent b33c3e1b7c
commit 9c4fe103cb
7 changed files with 132 additions and 0 deletions

View File

@ -491,6 +491,12 @@ zbt-we826-32M)
set_wifi_led "zbt-we826:green:wifi"
set_usb_led "zbt-we826:green:usb"
;;
zbt-we1226)
set_wifi_led "$boardname:green:wlan"
ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01"
ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x02"
ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10"
;;
zbt-wr8305rt)
ucidef_set_led_default "power" "power" "$boardname:green:sys" "1"
set_usb_led "$boardname:green:usb"

View File

@ -349,6 +349,7 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "0:wan" "6@eth0"
;;
zbt-we1226|\
y1)
ucidef_add_switch "switch0" \
"0:lan:2" "1:lan:1" "4:wan" "6@eth0"

View File

@ -314,6 +314,9 @@ get_status_led() {
zbt-we826-32M)
status_led="zbt-we826:green:power"
;;
zbt-we1226)
status_led="zbt-we1226:green:wlan"
;;
zbt-wg3526-16M|\
zbt-wg3526-32M)
status_led="zbt-wg3526:green:status"

View File

@ -688,6 +688,9 @@ ramips_board_detect() {
*"ZBT-WA05")
name="zbt-wa05"
;;
*"ZBT-WE1226")
name="zbt-we1226"
;;
*"ZBT-WE1326")
name="zbt-we1326"
;;

View File

@ -203,6 +203,7 @@ platform_check_image() {
zbt-ape522ii|\
zbt-cpe102|\
zbt-wa05|\
zbt-we1226|\
zbt-we1326|\
zbt-we2026|\
zbtlink,zbt-we3526|\

View File

@ -0,0 +1,111 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "mt7628an.dtsi"
/ {
compatible = "zbt,we1226", "mediatek,mt7628an-soc";
model = "Zbtlink ZBT-WE1226";
chosen {
bootargs = "console=ttyS0,115200";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
lan2 {
label = "zbt-we1226:green:lan2";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "zbt-we1226:green:lan1";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
wan {
label = "zbt-we1226:green:wan";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
wlan {
label = "zbt-we1226:green:wlan";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "wled_an";
ralink,function = "gpio";
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&wmac {
status = "okay";
ralink,mtd-eeprom = <&factory 0x4>;
};
&ethernet {
mtd-mac-address = <&factory 0x2e>;
mediatek,portmap = "llllw";
};

View File

@ -238,3 +238,10 @@ define Device/wrtnode2r
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += wrtnode2r
define Device/zbt-we1226
DTS := ZBT-WE1226
IMAGE_SIZE := $(ralink_default_fw_size_8M)
DEVICE_TITLE := ZBTlink ZBT-WE1226
endef
TARGET_DEVICES += zbt-we1226