mirror of https://github.com/hak5/openwrt.git
ar71xx: add kernel support for the WD My Net N600 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38072lede-17.01
Gabor Juhos
parent
9200807877
commit
9a2e94476a
|
|
@ -49,6 +49,7 @@ CONFIG_ATH79_MACH_HORNET_UB=y
|
|||
CONFIG_ATH79_MACH_JA76PF=y
|
||||
CONFIG_ATH79_MACH_JWAP003=y
|
||||
CONFIG_ATH79_MACH_MR600=y
|
||||
CONFIG_ATH79_MACH_MYNET_N600=y
|
||||
CONFIG_ATH79_MACH_MZK_W04NU=y
|
||||
CONFIG_ATH79_MACH_MZK_W300NH=y
|
||||
CONFIG_ATH79_MACH_NBG460N=y
|
||||
|
|
|
|||
|
|
@ -0,0 +1,191 @@
|
|||
/*
|
||||
* WD My Net N600 board support
|
||||
*
|
||||
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/phy.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ath9k_platform.h>
|
||||
#include <linux/ar8216_platform.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-spi.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
#include "nvram.h"
|
||||
|
||||
#define MYNET_N600_GPIO_LED_WIFI 0
|
||||
#define MYNET_N600_GPIO_LED_POWER 11
|
||||
#define MYNET_N600_GPIO_LED_INTERNET 12
|
||||
#define MYNET_N600_GPIO_LED_WPS 13
|
||||
|
||||
#define MYNET_N600_GPIO_LED_LAN1 4
|
||||
#define MYNET_N600_GPIO_LED_LAN2 3
|
||||
#define MYNET_N600_GPIO_LED_LAN3 2
|
||||
#define MYNET_N600_GPIO_LED_LAN4 1
|
||||
|
||||
#define MYNET_N600_GPIO_BTN_RESET 16
|
||||
#define MYNET_N600_GPIO_BTN_WPS 17
|
||||
|
||||
#define MYNET_N600_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define MYNET_N600_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_N600_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define MYNET_N600_MAC0_OFFSET 0
|
||||
#define MYNET_N600_MAC1_OFFSET 6
|
||||
#define MYNET_N600_WMAC_CALDATA_OFFSET 0x1000
|
||||
#define MYNET_N600_PCIE_CALDATA_OFFSET 0x5000
|
||||
|
||||
#define MYNET_N600_NVRAM_ADDR 0x1f058010
|
||||
#define MYNET_N600_NVRAM_SIZE 0x7ff0
|
||||
|
||||
static struct gpio_led mynet_n600_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "wd:blue:power",
|
||||
.gpio = MYNET_N600_GPIO_LED_POWER,
|
||||
.active_low = 0,
|
||||
},
|
||||
{
|
||||
.name = "wd:blue:wps",
|
||||
.gpio = MYNET_N600_GPIO_LED_WPS,
|
||||
.active_low = 0,
|
||||
},
|
||||
{
|
||||
.name = "wd:blue:wireless",
|
||||
.gpio = MYNET_N600_GPIO_LED_WIFI,
|
||||
.active_low = 0,
|
||||
},
|
||||
{
|
||||
.name = "wd:blue:internet",
|
||||
.gpio = MYNET_N600_GPIO_LED_INTERNET,
|
||||
.active_low = 0,
|
||||
},
|
||||
{
|
||||
.name = "wd:green:lan1",
|
||||
.gpio = MYNET_N600_GPIO_LED_LAN1,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "wd:green:lan2",
|
||||
.gpio = MYNET_N600_GPIO_LED_LAN2,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "wd:green:lan3",
|
||||
.gpio = MYNET_N600_GPIO_LED_LAN3,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "wd:green:lan4",
|
||||
.gpio = MYNET_N600_GPIO_LED_LAN4,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button mynet_n600_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "Reset button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_WPS_BUTTON,
|
||||
.debounce_interval = MYNET_N600_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = MYNET_N600_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.desc = "WPS button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_WPS_BUTTON,
|
||||
.debounce_interval = MYNET_N600_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = MYNET_N600_GPIO_BTN_WPS,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static void mynet_n600_get_mac(const char *name, char *mac)
|
||||
{
|
||||
u8 *nvram = (u8 *) KSEG1ADDR(MYNET_N600_NVRAM_ADDR);
|
||||
int err;
|
||||
|
||||
err = ath79_nvram_parse_mac_addr(nvram, MYNET_N600_NVRAM_SIZE,
|
||||
name, mac);
|
||||
if (err)
|
||||
pr_err("no MAC address found for %s\n", name);
|
||||
}
|
||||
|
||||
#define MYNET_N600_WAN_PHY_MASK BIT(0)
|
||||
|
||||
static void __init mynet_n600_setup(void)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||
u8 tmpmac[ETH_ALEN];
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
|
||||
ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN1,
|
||||
AR934X_GPIO_OUT_GPIO);
|
||||
ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN2,
|
||||
AR934X_GPIO_OUT_GPIO);
|
||||
ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN3,
|
||||
AR934X_GPIO_OUT_GPIO);
|
||||
ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN4,
|
||||
AR934X_GPIO_OUT_GPIO);
|
||||
ath79_gpio_output_select(MYNET_N600_GPIO_LED_INTERNET,
|
||||
AR934X_GPIO_OUT_GPIO);
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(mynet_n600_leds_gpio),
|
||||
mynet_n600_leds_gpio);
|
||||
|
||||
ath79_register_gpio_keys_polled(-1, MYNET_N600_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(mynet_n600_gpio_keys),
|
||||
mynet_n600_gpio_keys);
|
||||
|
||||
mynet_n600_get_mac("wlan24mac=", tmpmac);
|
||||
ath79_register_wmac(art + MYNET_N600_WMAC_CALDATA_OFFSET, tmpmac);
|
||||
|
||||
mynet_n600_get_mac("wlan5mac=", tmpmac);
|
||||
ap91_pci_init(art + MYNET_N600_PCIE_CALDATA_OFFSET, tmpmac);
|
||||
|
||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE |
|
||||
AR934X_ETH_CFG_SW_PHY_SWAP);
|
||||
|
||||
ath79_register_mdio(1, 0x0);
|
||||
|
||||
/* LAN */
|
||||
mynet_n600_get_mac("lanmac=", ath79_eth1_data.mac_addr);
|
||||
|
||||
/* GMAC1 is connected to the internal switch */
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
||||
|
||||
ath79_register_eth(1);
|
||||
|
||||
/* WAN */
|
||||
mynet_n600_get_mac("wanmac=", ath79_eth0_data.mac_addr);
|
||||
|
||||
/* GMAC0 is connected to the PHY4 of the internal switch */
|
||||
ath79_switch_data.phy4_mii_en = 1;
|
||||
ath79_switch_data.phy_poll_mask = MYNET_N600_WAN_PHY_MASK;
|
||||
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
||||
ath79_eth0_data.phy_mask = MYNET_N600_WAN_PHY_MASK;
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
||||
|
||||
ath79_register_eth(0);
|
||||
|
||||
ath79_register_usb();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_MYNET_N600, "MYNET-N600", "WD My Net N600",
|
||||
mynet_n600_setup);
|
||||
|
|
@ -0,0 +1,39 @@
|
|||
--- a/arch/mips/ath79/Kconfig
|
||||
+++ b/arch/mips/ath79/Kconfig
|
||||
@@ -759,6 +759,16 @@ config ATH79_MACH_UBNT_XM
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
Ubiquiti Networks XM (rev 1.0) board.
|
||||
|
||||
+config ATH79_MACH_MYNET_N600
|
||||
+ bool "WD My Net N600 board support"
|
||||
+ select SOC_AR934X
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_GPIO_BUTTONS
|
||||
+ select ATH79_DEV_LEDS_GPIO
|
||||
+ select ATH79_DEV_M25P80
|
||||
+ select ATH79_DEV_WMAC
|
||||
+ select ATH79_NVRAM
|
||||
+
|
||||
config ATH79_MACH_ZCN_1523H
|
||||
bool "Zcomax ZCN-1523H support"
|
||||
select SOC_AR724X
|
||||
--- a/arch/mips/ath79/machtypes.h
|
||||
+++ b/arch/mips/ath79/machtypes.h
|
||||
@@ -53,6 +53,7 @@ enum ath79_mach_type {
|
||||
ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
|
||||
ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
|
||||
ATH79_MACH_MR600, /* OpenMesh MR600 */
|
||||
+ ATH79_MACH_MYNET_N600, /* WD My Net N600 */
|
||||
ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
|
||||
ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
|
||||
ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
|
||||
--- a/arch/mips/ath79/Makefile
|
||||
+++ b/arch/mips/ath79/Makefile
|
||||
@@ -64,6 +64,7 @@ obj-$(CONFIG_ATH79_MACH_JA76PF) += mach
|
||||
obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
|
||||
obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
|
||||
obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
|
||||
+obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
|
||||
obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o
|
||||
obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
|
||||
obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
|
||||
Loading…
Reference in New Issue