hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ath79/nand: add support for Netgear WNDR4300SW 

This patch adds support for the WNDR4300SW, marketed by California ISP
SureWest (hence the 'SW' suffix). Hardware wise, it's identical to the
WNDR4300 v1.

Specifications:
* SoC: Atheros AR9344
* RAM: 128 MB
* Flash: 128 MB NAND flash
* WiFi: Atheros AR9580 (5 GHz) and AR9344 (2,4 GHz)
* Ethernet: 5x 1000Base-T
* LED: Power, WAN, LAN, WiFi, USB, WPS
* UART: on board, to the right of the RF shield at the top of the board

Installation:

* Flashing through the OEM web interface:
  + Connect your computer to the router with an ethernet cable and browse
    to http://192.168.1.1/
  + Log in with the default credentials are admin:password
  + Browse to Advanced > Administration > Firmware Upgrade in the Netgear
    interface
  + Upload the Openwrt firmware: openwrt-ath79-nand-netgear_wndr4300sw-squashfs-factory.img
  + Proceed with the firmware installation and give the device a few
    minutes to finish and reboot.

* Flashing through TFTP:
  + Configure your wired client with a static IP in the 192.168.1.x range,
    e.g. 192.168.1.10 and netmask 255.255.255.0.
  + Power off the router.
  + Press and hold the RESET button (the factory reset button on the bottom
    of the device, with the red circle around it) and turn the router on
    while keeping the button pressed.
  + The power LED will start flashing orange. You can release the button
    once it switches to flashing green.
  + Transfer the image over TFTP:
    $ tftp 192.168.1.1 -m binary -c put openwrt-ath79-nand-netgear_wndr4300sw-squashfs-factory.img

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
master
Stijn Segers 2020-05-23 10:50:03 +02:00 committed by Adrian Schmutzler
parent 1bbc1aa884
commit 9a1f4b2f83
5 changed files with 24 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
target/linux/ath79/dts/ar9344_netgear_wndr4300sw.dts Normal file
View File

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9344_netgear_wndr.dtsi"
/ {
compatible = "netgear,wndr4300sw", "qca,ar9344";
model = "Netgear WNDR4300SW";
};

10
target/linux/ath79/image/nand.mk
View File

@ -172,6 +172,16 @@ define Device/netgear_wndr4300
endef
TARGET_DEVICES += netgear_wndr4300
define Device/netgear_wndr4300sw
SOC := ar9344
DEVICE_MODEL := WNDR4300SW
NETGEAR_KERNEL_MAGIC := 0x33373033
NETGEAR_BOARD_ID := WNDR4300SW
NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
$(Device/netgear_ath79_nand)
endef
TARGET_DEVICES += netgear_wndr4300sw
define Device/netgear_wndr4300-v2
SOC := qca9563
DEVICE_MODEL := WNDR4300

1
target/linux/ath79/nand/base-files/etc/board.d/01_leds
View File

@ -14,6 +14,7 @@ glinet,gl-ar300m-nor)
;;
netgear,wndr3700-v4|\
netgear,wndr4300|\
netgear,wndr4300sw|\
netgear,wndr4300-v2|\
netgear,wndr4500-v3)
ucidef_set_led_switch "wan-amber" "WAN (amber)" "netgear:amber:wan" "switch0" "0x20"

2
target/linux/ath79/nand/base-files/etc/board.d/02_network
View File

@ -22,6 +22,7 @@ ath79_setup_interfaces()
;;
netgear,wndr3700-v4|\
netgear,wndr4300|\
netgear,wndr4300sw|\
netgear,wndr4300-v2|\
netgear,wndr4500-v3)
ucidef_add_switch "switch0" \
@ -44,6 +45,7 @@ ath79_setup_macs()
case "$board" in
netgear,wndr3700-v4|\
netgear,wndr4300|\
netgear,wndr4300sw|\
netgear,wndr4300-v2|\
netgear,wndr4500-v3)
wan_mac=$(mtd_get_mac_binary caldata 0x6)

2
target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@ -11,6 +11,7 @@ case "$FIRMWARE" in
case $board in
netgear,wndr3700-v4|\
netgear,wndr4300|\
netgear,wndr4300sw|\
netgear,wndr4300-v2|\
netgear,wndr4500-v3)
caldata_extract "caldata" 0x1000 0x440
@ -24,6 +25,7 @@ case "$FIRMWARE" in
case $board in
netgear,wndr3700-v4|\
netgear,wndr4300|\
netgear,wndr4300sw|\
netgear,wndr4300-v2|\
netgear,wndr4500-v3)
caldata_extract "caldata" 0x5000 0x440