convert ppc44x to arch/powerpc, use squashfs images by default

SVN-Revision: 10372
lede-17.01
Imre Kaloz 2008-02-03 14:54:01 +00:00
parent 4f71fabba4
commit 98236f47c8
7 changed files with 68 additions and 141 deletions

View File

@ -9,13 +9,15 @@ include $(TOPDIR)/rules.mk
ARCH:=powerpc
BOARD:=ppc44x
BOARDNAME:=AMCC Taishan
FEATURES:=jffs2
FEATURES:=squashfs
LINUX_VERSION:=2.6.23.14
LINUX_KARCH:=ppc
LINUX_VERSION:=2.6.24
LINUX_KARCH:=powerpc
include $(INCLUDE_DIR)/target.mk
KERNELNAME:="zImage"
define Target/Description
Build firmware images for the AMCC Taishan evaluation board
endef

View File

@ -1,5 +1,4 @@
# CONFIG_40x is not set
CONFIG_440A=y
CONFIG_440GX=y
CONFIG_44x=y
CONFIG_4xx=y
@ -19,12 +18,13 @@ CONFIG_BOOKE=y
# CONFIG_BOOKE_WDT is not set
CONFIG_BOOT_LOAD=0x01000000
# CONFIG_BT is not set
CONFIG_CMDLINE="console=ttyS1,115200 init=/etc/preinit"
CONFIG_CMDLINE="console=ttyS1,115200 root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd init=/etc/preinit"
CONFIG_CMDLINE_BOOL=y
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_CONSISTENT_START=0xff100000
# CONFIG_CPU_FREQ is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEVICE_TREE="taishan.dts"
# CONFIG_E200 is not set
# CONFIG_E500 is not set
# CONFIG_EBONY is not set
@ -43,22 +43,18 @@ CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_I2C is not set
CONFIG_IBM_EMAC=y
CONFIG_IBM_EMAC4=y
# CONFIG_IBM_EMAC_DEBUG is not set
CONFIG_IBM_EMAC_PHY_RX_CLK_FIX=y
CONFIG_IBM_EMAC_POLL_WEIGHT=32
CONFIG_IBM_EMAC_RGMII=y
CONFIG_IBM_EMAC_RXB=128
CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
CONFIG_IBM_EMAC_TAH=y
CONFIG_IBM_EMAC_TXB=128
CONFIG_IBM_EMAC_ZMII=y
CONFIG_IBM_NEW_EMAC=y
CONFIG_IBM_NEW_EMAC_RXB=128
CONFIG_IBM_NEW_EMAC_TXB=128
CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
# CONFIG_IBM_NEW_EMAC_DEBUG is not set
CONFIG_IBM_OCP=y
# CONFIG_IDE is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_ISA_DMA_API=y
# CONFIG_KATMAI is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_LOWMEM_SIZE=0x30000000
# CONFIG_LUAN is not set
@ -106,10 +102,8 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_START=0x8000000
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_RAM is not set
@ -123,6 +117,7 @@ CONFIG_NET_SCH_FIFO=y
CONFIG_NOT_COHERENT_CACHE=y
# CONFIG_NVRAM is not set
# CONFIG_OCOTEA is not set
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_PC_KEYBOARD is not set
@ -130,15 +125,21 @@ CONFIG_PHYS_64BIT=y
# CONFIG_PNPACPI is not set
CONFIG_PPC=y
CONFIG_PPC32=y
# CONFIG_PPC64 is not set
CONFIG_PPC4xx_DMA=y
CONFIG_PPC4xx_EDMA=y
# CONFIG_PPC_8xx is not set
# CONFIG_PPC_85xx is not set
CONFIG_PPC_DCR=y
CONFIG_PPC_DCR_NATIVE=y
CONFIG_PPC_GEN550=y
# CONFIG_PPC_I8259 is not set
CONFIG_PPC_INDIRECT_PCI=y
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_PPC_OCP=y
CONFIG_PROC_DEVICETREE=y
CONFIG_PTE_64BIT=y
# CONFIG_RAINIER is not set
CONFIG_RESOURCES_64BIT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
@ -148,7 +149,9 @@ CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_TEXT_DEBUG is not set
# CONFIG_SEQUOIA is not set
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_SOUND is not set
# CONFIG_SPARSEMEM_STATIC is not set
@ -160,6 +163,7 @@ CONFIG_TASK_SIZE=0x80000000
# CONFIG_USER_NS is not set
# CONFIG_VIA_RHINE is not set
CONFIG_WANT_EARLY_SERIAL=y
# CONFIG_WARP is not set
# CONFIG_WINDFARM is not set
# CONFIG_XILINX_SYSACE is not set
# CONFIG_YUCCA is not set

View File

@ -10,7 +10,7 @@ include $(INCLUDE_DIR)/image.mk
JFFS2_BLOCKSIZE=256k
define Image/Prepare
cp $(LINUX_DIR)/arch/ppc/boot/images/uImage $(KDIR)/uImage
cp $(LINUX_DIR)/arch/powerpc/boot/cuImage.taishan $(KDIR)/uImage
endef
define Image/BuildKernel
@ -23,7 +23,7 @@ endef
define Image/Build/jffs2-256k
( \
dd if=$(LINUX_DIR)/arch/ppc/boot/images/uImage bs=4096k conv=sync; \
dd if=$(KDIR)/uImage bs=2048k conv=sync; \
dd if=$(KDIR)/root.$(1) bs=256k conv=sync; \
) > $(BIN_DIR)/openwrt-$(BOARD)-jffs2.img
endef
@ -31,7 +31,7 @@ endef
define Image/Build/squashfs
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
( \
dd if=$(LINUX_DIR)/arch/ppc/boot/images/uImage bs=4096k conv=sync; \
dd if=$(KDIR)/uImage bs=2048k conv=sync; \
dd if=$(KDIR)/root.$(1) bs=256k conv=sync; \
) > $(BIN_DIR)/openwrt-$(BOARD)-$(1).img
endef

View File

@ -0,0 +1,38 @@
diff -Nur linux-2.6.24/arch/powerpc/boot/dts/taishan.dts linux-2.6.24-owrt/arch/powerpc/boot/dts/taishan.dts
--- linux-2.6.24/arch/powerpc/boot/dts/taishan.dts 2008-01-31 18:55:57.000000000 +0100
+++ linux-2.6.24-owrt/arch/powerpc/boot/dts/taishan.dts 2008-02-02 23:04:12.000000000 +0100
@@ -175,6 +175,34 @@
interrupt-parent = <&UIC1>;
/* TODO: Add other EBC devices */
+ nor_flash@0,0 {
+ compatible = "cfi-flash";
+ bank-width = <4>;
+ device-width = <2>;
+ reg = <0 000000 4000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0 200000>;
+ };
+ partition@200000 {
+ label = "rootfs";
+ reg = <200000 3c00000>;
+ };
+ partition@3e00000 {
+ label = "diagnostics";
+ reg = <3e00000 140000>;
+ };
+ partition@3f40000 {
+ label = "env";
+ reg = <3f40000 80000>;
+ };
+ partition@3fc0000 {
+ label = "u-boot";
+ reg = <3fc0000 40000>;
+ };
+ };
};

View File

@ -1,71 +0,0 @@
diff -Nur linux-2.6.21/drivers/net/ibm_emac/ibm_emac_phy.c linux-2.6.21-owrt/drivers/net/ibm_emac/ibm_emac_phy.c
--- linux-2.6.21/drivers/net/ibm_emac/ibm_emac_phy.c 2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21-owrt/drivers/net/ibm_emac/ibm_emac_phy.c 2007-05-28 16:27:15.000000000 +0200
@@ -299,11 +299,50 @@
.ops = &cis8201_phy_ops
};
+#if defined(CONFIG_TAISHAN)
+static int et1011c_init(struct mii_phy *phy)
+{
+ u16 reg_short;
+
+ reg_short = (u16)(phy_read(phy,0x16));
+ reg_short &= ~(0x7);
+ reg_short |= 0x6; /* RGMII Trace Delay*/
+ phy_write(phy, 0x16, reg_short);
+
+ reg_short = (u16)(phy_read(phy, 0x17));
+ reg_short &= ~(0x40);
+ phy_write(phy, 0x17, reg_short);
+
+ phy_write(phy,0x1c,0x74f0);
+ return 0;
+}
+
+static struct mii_phy_ops et1011c_phy_ops = {
+ .init = et1011c_init,
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link
+};
+
+static struct mii_phy_def et1011c_phy_def = {
+ .phy_id = 0x0282f000,
+ .phy_id_mask = 0x0fffff00,
+ .name = "ET1011C Gigabit Ethernet",
+ .ops = &et1011c_phy_ops
+};
+
+static struct mii_phy_def *mii_phy_table[] = {
+ &et1011c_phy_def,
+ NULL
+};
+#else
static struct mii_phy_def *mii_phy_table[] = {
&cis8201_phy_def,
&genmii_phy_def,
NULL
};
+#endif
int mii_phy_probe(struct mii_phy *phy, int address)
{
diff -Nur linux-2.6.21/drivers/net/ibm_emac/ibm_emac_zmii.c linux-2.6.21-owrt/drivers/net/ibm_emac/ibm_emac_zmii.c
--- linux-2.6.21/drivers/net/ibm_emac/ibm_emac_zmii.c 2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21-owrt/drivers/net/ibm_emac/ibm_emac_zmii.c 2007-05-28 16:26:48.000000000 +0200
@@ -170,6 +170,13 @@
struct ocp_func_emac_data *emacdata = dev->def->additions;
if (emacdata->zmii_idx >= 0) {
+#if defined(CONFIG_TAISHAN)
+ /* don't attach emac0 and emac1 */
+ if( dev->def->index < 2 )
+ {
+ return -ENODEV;
+ }
+#endif
dev->zmii_input = emacdata->zmii_mux;
dev->zmii_dev =
ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII,

View File

@ -1,29 +0,0 @@
diff -Nur linux-2.6.21/arch/ppc/platforms/4xx/taishan.c linux-2.6.21-owrt/arch/ppc/platforms/4xx/taishan.c
--- linux-2.6.21/arch/ppc/platforms/4xx/taishan.c 2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21-owrt/arch/ppc/platforms/4xx/taishan.c 2007-05-28 17:21:46.000000000 +0200
@@ -60,8 +60,8 @@
};
#define RW_PART0_OF 0
-#define RW_PART0_SZ 0x180000
-#define RW_PART1_SZ 0x200000
+#define RW_PART0_SZ 0x400000
+#define RW_PART1_SZ 0x3a00000
/* Partition 2 will be autosized dynamically... */
#define RW_PART3_SZ 0x80000
#define RW_PART4_SZ 0x40000
@@ -73,12 +73,12 @@
.size = RW_PART0_SZ
},
{
- .name = "root",
+ .name = "rootfs",
.offset = MTDPART_OFS_APPEND,
.size = RW_PART1_SZ,
},
{
- .name = "user",
+ .name = "diagnostics",
.offset = MTDPART_OFS_APPEND,
/* .size = RW_PART2_SZ */ /* will be adjusted dynamically */
},

View File

@ -1,17 +0,0 @@
diff -Nur linux-2.6.21/arch/ppc/boot/images/Makefile linux-2.6.21-owrt/arch/ppc/boot/images/Makefile
--- linux-2.6.21/arch/ppc/boot/images/Makefile 2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21-owrt/arch/ppc/boot/images/Makefile 2007-05-28 17:44:11.000000000 +0200
@@ -20,11 +20,11 @@
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \
- -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \
+ -C none -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \
-d $< $@
targets += uImage
-$(obj)/uImage: $(obj)/vmlinux.gz
+$(obj)/uImage: $(obj)/vmlinux.bin
$(Q)rm -f $@
$(call cmd,uimage)
@echo -n ' Image: $@ '