diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
index 6e17d4dde2..4903eb92d0 100644
--- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
@@ -109,6 +109,12 @@ P2601HNFX)
 	ucidef_add_switch "switch0" "1" "1"
 	ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
 	;;
+	
+P2812HNUFX)
+	ucidef_set_interface_lan 'eth0.1'
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 5 6t"
+	;;
 
 TDW8970)
 	lan_mac=$(mtd_get_mac_binary boardconfig 61696)
diff --git a/target/linux/lantiq/dts/P2812HNUFX.dts b/target/linux/lantiq/dts/P2812HNUFX.dts
new file mode 100644
index 0000000000..5af10d49f3
--- /dev/null
+++ b/target/linux/lantiq/dts/P2812HNUFX.dts
@@ -0,0 +1,308 @@
+/dts-v1/;
+
+/include/ "vr9.dtsi"
+
+/ {
+	model = "P2812HNUFX - ZyXEL P-2812HNU-Fx";
+	
+	chosen {
+		/*bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";*/
+	};
+
+	memory@0 {
+		reg = <0x0 0x8000000>;
+	};
+	
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,fpi", "simple-bus";
+		ranges = <0x0 0x10000000 0xEEFFFFF>;
+		reg = <0x10000000 0xEF00000>;
+
+		localbus@0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "lantiq,localbus", "simple-bus";
+
+			nand-parts@0 {
+				compatible = "gen_nand", "lantiq,nand-xway";
+				lantiq,cs = <1>;
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x00000 0x40000>;
+				};
+
+				partition@40000 {
+					label = "u-boot environment";
+					reg = <0x40000 0x20000>;
+				};
+
+				partition@60000 {
+					label = "root";
+					reg = <0x60000 0x7fa0000>;
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			compatible = "lantiq,pinctrl-xr9";
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+			
+			interrupt-parent = <&icu0>;
+			interrupts = <166 135 66 40 41 42 38>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xE100B10 0xA0>;
+
+			state_default: pinmux {
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				gphy-leds {
+					lantiq,groups = "gphy0 led1", "gphy1 led1",
+							"gphy0 led2", "gphy1 led2";
+					lantiq,function = "gphy";
+					lantiq,pull = <2>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+					lantiq,pull = <2>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				pci {
+					lantiq,groups = "gnt1", "req1";
+					lantiq,function = "pci";
+				};
+				pci-rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <0>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				ifxhcd-rst {
+					lantiq,pins = "io33";
+					lantiq,pull = <0>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				nand {
+					lantiq,groups = "nand cle", "nand ale",
+							"nand rd", "nand cs1", "nand rdy";
+					lantiq,function = "ebu";
+					lantiq,pull = <1>;
+				};
+			};
+		};
+
+		eth@E108000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "lantiq,xrx200-net";
+			reg = <	0xE108000 0x3000 /* switch */
+				0xE10B100 0x70 /* mdio */
+				0xE10B1D8 0x30 /* mii */
+				0xE10B308 0x30 /* pmac */
+			>;
+			interrupt-parent = <&icu0>;
+			interrupts = <73 72>;
+
+			lan: interface@0 {
+				compatible = "lantiq,xrx200-pdi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				mac-address = [ 00 11 22 33 44 55 ];
+				lantiq,switch;
+
+				ethernet@0 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <0>;
+					phy-mode = "rgmii";
+					phy-handle = <&phy0>;
+				};
+				ethernet@1 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <1>;
+					phy-mode = "rgmii";
+					phy-handle = <&phy1>;
+				};
+				ethernet@2 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <2>;
+					phy-mode = "gmii";
+					phy-handle = <&phy11>;
+				};
+				ethernet@4 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <4>;
+					phy-mode = "gmii";
+					phy-handle = <&phy13>;
+				};
+				ethernet@5 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <5>;
+					phy-mode = "rgmii";
+					phy-handle = <&phy5>;
+				};
+			};
+
+			mdio@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "lantiq,xrx200-mdio";
+				phy0: ethernet-phy@0 {
+					reg = <0x0>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+				};
+				phy1: ethernet-phy@1 {
+					reg = <0x1>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+				};
+				phy5: ethernet-phy@5 {
+					reg = <0x5>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+				};
+				phy11: ethernet-phy@11 {
+					reg = <0x11>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+				};
+				phy13: ethernet-phy@13 {
+					reg = <0x13>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+				};
+			};
+		};
+
+		stp: stp@E100BB0 {
+			compatible = "lantiq,gpio-stp-xway";
+			reg = <0xE100BB0 0x40>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			lantiq,shadow = <0xffffff>;
+			lantiq,groups = <0x7>;
+			/*
+			lantiq,dsl = <0x3>;
+			lantiq,phy1 = <0x7>;
+			lantiq,phy2 = <0x7>;
+			*/
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 33 0>;
+			lantiq,portmask = <0x3>;
+		};
+
+		pci@E105400 {
+			lantiq,bus-clock = <33333333>;
+			/* lantiq,external-clock; */
+			lantiq,delay-hi = <0>; /* 0ns delay */
+			lantiq,delay-lo = <0>; /* 0.0ns delay */
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x7000 0 0 1 &icu0 29 //1 // slot 14, irq 29
+				>;
+			gpio-reset = <&gpio 21 0>;
+			req-mask = <0x1>;	/* GNT1 */
+			status = "okay";
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware = "lantiq/vr9_phy11g_a1x.bin";
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		reset {
+			label = "reset";
+			gpios = <&gpio 39 1>;
+			linux,code = <0x198>;
+		};
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 1 1>;
+			linux,code = <0xf7>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		internet2 {
+			label = "internet2";
+			gpios = <&stp 16 1>;
+		};
+		internet {
+			label = "internet";
+			gpios = <&stp 17 1>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&stp 18 1>;
+		};
+		dsl2 {
+			label = "dsl2";
+			gpios = <&stp 19 1>;
+		};
+		wifi2 {
+			label = "wifi2";
+			gpios = <&stp 20 1>;
+		};
+		wlan {
+			label = "wifi";
+			gpios = <&stp 21 1>;
+		};
+		power2 {
+			label = "power2";
+			gpios = <&stp 22 1>;
+		};
+		power {
+			label = "power";
+			gpios = <&stp 23 1>;
+		};
+		usb1 {
+			label = "usb";
+			gpios = <&gpio 38 1>;
+		};
+		usb2 {
+			label = "usb2";
+			gpios = <&gpio 44 1>;
+		};
+		phone1 {
+			label = "phone1";
+			gpios = <&gpio 11 1>;
+		};
+		phone1warn {
+			label = "phone1warn";
+			gpios = <&gpio 12 1>;
+		};
+		phone2 {
+			label = "phone2";
+			gpios = <&gpio 28 1>;
+		};
+		phone2warn {
+			label = "phone2warn";
+			gpios = <&gpio 26 1>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index 98f82369b1..4550fc4619 100644
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -310,6 +310,10 @@ endif
 ifeq ($(CONFIG_TARGET_lantiq_xrx200),y)
 
 # VR9
+Image/BuildKernel/Profile/P2812HNUFX=$(call Image/BuildKernel/Template,P2812HNUFX)
+Image/InstallKernel/Template/P2812HNUFX=$(call Image/InstallKernel/Template,P2812HNUFX)
+Image/Build/Profile/P2812HNUFX=$(call Image/Build/$(1),$(1),P2812HNUFX)
+
 Image/BuildKernel/Profile/EASY80920NAND=$(call Image/BuildKernel/Template,EASY80920NAND)
 Image/Build/Profile/EASY80920NAND=$(call Image/Build/$(1),$(1),EASY80920NAND)
 
diff --git a/target/linux/lantiq/xrx200/profiles/zyxel.mk b/target/linux/lantiq/xrx200/profiles/zyxel.mk
new file mode 100644
index 0000000000..e758a50360
--- /dev/null
+++ b/target/linux/lantiq/xrx200/profiles/zyxel.mk
@@ -0,0 +1,14 @@
+define Profile/P2812HNUFX
+  NAME:=ZyXEL P-2812HNU-Fx
+  PACKAGES:=kmod-rt2800-pci wpad-mini \
+	kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \
+	kmod-ltq-vdsl-vr9-mei kmod-ltq-vdsl-vr9 \
+	kmod-ltq-atm-vr9 ltq-vdsl-vr9-fw-installer \
+	ltq-vdsl-app ppp-mod-pppoa \
+	swconfig
+endef
+
+P2812HNUFX_UBIFS_OPTS:="-m 2048 -e 126KiB -c 4096"
+P2812HNUFX_UBI_OPTS:="-m 2048 -p 128KiB -s 512"
+
+$(eval $(call Profile,P2812HNUFX))