remove binutils 2.17 and 2.19

SVN-Revision: 15619
lede-17.01
Felix Fietkau 2009-05-05 11:01:35 +00:00
parent e85943d41a
commit 90826d83c9
18 changed files with 0 additions and 111579 deletions

View File

@ -8,16 +8,9 @@ choice
help
Select the version of binutils you wish to use.
config BINUTILS_VERSION_2_17
bool "binutils 2.17"
config BINUTILS_VERSION_2_18
bool "binutils 2.18"
config BINUTILS_VERSION_2_19
depends !TARGET_avr32
bool "binutils 2.19"
config BINUTILS_VERSION_2_19_1
depends !TARGET_avr32
bool "binutils 2.19.1"
@ -33,9 +26,7 @@ config EXTRA_BINUTILS_CONFIG_OPTIONS
config BINUTILS_VERSION
string
prompt "Binutils Version" if (TOOLCHAINOPTS && NULL)
default "2.17" if BINUTILS_VERSION_2_17
default "2.18" if BINUTILS_VERSION_2_18
default "2.19" if BINUTILS_VERSION_2_19
default "2.19.1" if BINUTILS_VERSION_2_19_1
default "2.18" if TARGET_avr32
default "2.18" if TARGET_ppc44x || TARGET_ppc40x

View File

@ -12,15 +12,9 @@ PKG_VERSION:=$(call qstrip,$(CONFIG_BINUTILS_VERSION))
PKG_SOURCE_URL:=@GNU/binutils/
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
ifeq ($(PKG_VERSION),2.17)
PKG_MD5SUM:=e26e2e06b6e4bf3acf1dc8688a94c0d1
endif
ifeq ($(PKG_VERSION),2.18)
PKG_MD5SUM:=9d22ee4dafa3a194457caf4706f9cf01
endif
ifeq ($(PKG_VERSION),2.19)
PKG_MD5SUM:=17a52219dee5a76c1a9d9b0bfd337d66
endif
ifeq ($(PKG_VERSION),2.19.1)
PKG_MD5SUM:=09a8c5821a2dfdbb20665bc0bd680791
endif

View File

@ -1,20 +0,0 @@
--- a/config.sub
+++ b/config.sub
@@ -240,7 +240,7 @@ case $basic_machine in
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
| am33_2.0 \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
| bfin \
| c4x | clipper \
| d10v | d30v | dlx | dsp16xx \
@@ -317,7 +317,7 @@ case $basic_machine in
| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
- | avr-* \
+ | avr-* | avr32-* \
| bfin-* | bs2000-* \
| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
| clipper-* | craynv-* | cydra-* \

View File

@ -1,139 +0,0 @@
--- a/bfd/configure
+++ b/bfd/configure
@@ -3576,7 +3576,7 @@ irix5* | irix6*)
;;
# This must be Linux ELF.
-linux-gnu*)
+linux-gnu*|linux-uclibc*)
lt_cv_deplibs_check_method=pass_all
;;
--- a/binutils/configure
+++ b/binutils/configure
@@ -3411,7 +3411,7 @@ irix5* | irix6*)
;;
# This must be Linux ELF.
-linux-gnu*)
+linux-gnu*|linux-uclibc*)
lt_cv_deplibs_check_method=pass_all
;;
--- a/configure
+++ b/configure
@@ -1276,7 +1276,7 @@ case "${target}" in
am33_2.0-*-linux*)
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
;;
- sh-*-linux*)
+ sh*-*-linux*)
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
@@ -1584,7 +1584,7 @@ case "${target}" in
romp-*-*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
;;
- sh-*-* | sh64-*-*)
+ sh*-*-* | sh64-*-*)
case "${host}" in
i[3456789]86-*-vsta) ;; # don't add gprof back in
i[3456789]86-*-go32*) ;; # don't add gprof back in
--- a/configure.in
+++ b/configure.in
@@ -468,7 +468,7 @@ case "${target}" in
am33_2.0-*-linux*)
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
;;
- sh-*-linux*)
+ sh*-*-linux*)
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
@@ -776,7 +776,7 @@ case "${target}" in
romp-*-*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
;;
- sh-*-* | sh64-*-*)
+ sh*-*-* | sh64-*-*)
case "${host}" in
i[[3456789]]86-*-vsta) ;; # don't add gprof back in
i[[3456789]]86-*-go32*) ;; # don't add gprof back in
--- a/gas/configure
+++ b/gas/configure
@@ -3411,7 +3411,7 @@ irix5* | irix6*)
;;
# This must be Linux ELF.
-linux-gnu*)
+linux-gnu*|linux-uclibc*)
lt_cv_deplibs_check_method=pass_all
;;
--- a/gprof/configure
+++ b/gprof/configure
@@ -3414,6 +3414,11 @@ linux-gnu*)
lt_cv_deplibs_check_method=pass_all
;;
+linux-uclibc*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
+ ;;
+
netbsd* | knetbsd*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
--- a/ld/configure
+++ b/ld/configure
@@ -3413,7 +3413,7 @@ irix5* | irix6*)
;;
# This must be Linux ELF.
-linux-gnu*)
+linux-gnu*|linux-uclibc*)
lt_cv_deplibs_check_method=pass_all
;;
--- a/libtool.m4
+++ b/libtool.m4
@@ -739,7 +739,7 @@ irix5* | irix6*)
;;
# This must be Linux ELF.
-linux-gnu*)
+linux-gnu*|linux-uclibc*)
lt_cv_deplibs_check_method=pass_all
;;
--- a/ltconfig
+++ b/ltconfig
@@ -602,6 +602,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-
# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
case $host_os in
+linux-uclibc*) ;;
linux-gnu*) ;;
linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
esac
@@ -1247,7 +1248,7 @@ linux-gnuoldld* | linux-gnuaout* | linux
;;
# This must be Linux ELF.
-linux-gnu*)
+linux-gnu*|linux-uclibc*)
version_type=linux
need_lib_prefix=no
need_version=no
--- a/opcodes/configure
+++ b/opcodes/configure
@@ -3579,7 +3579,7 @@ irix5* | irix6*)
;;
# This must be Linux ELF.
-linux-gnu*)
+linux-gnu*|linux-uclibc*)
lt_cv_deplibs_check_method=pass_all
;;

View File

@ -1,22 +0,0 @@
--- a/configure
+++ b/configure
@@ -1305,7 +1305,7 @@ case "${target}" in
arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
;;
- arm*-*-linux-gnueabi)
+ arm*-*-linux-gnueabi | arm*-*-linux-uclibcgnueabi)
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
noconfigdirs="$noconfigdirs target-libjava target-libobjc"
;;
--- a/configure.in
+++ b/configure.in
@@ -497,7 +497,7 @@ case "${target}" in
arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
;;
- arm*-*-linux-gnueabi)
+ arm*-*-linux-gnueabi | arm*-*-linux-uclibcgnueabi)
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
noconfigdirs="$noconfigdirs target-libjava target-libobjc"
;;

View File

@ -1,50 +0,0 @@
#!/bin/sh -e
## 001_ld_makefile_patch.dpatch
##
## All lines beginning with `## DP:' are a description of the patch.
## DP: Description: correct where ld scripts are installed
## DP: Author: Chris Chimelis <chris@debian.org>
## DP: Upstream status: N/A
## DP: Date: ??
if [ $# -ne 1 ]; then
echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
exit 1
fi
[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
case "$1" in
-patch) patch $patch_opts -p1 < $0;;
-unpatch) patch $patch_opts -p1 -R < $0;;
*)
echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
exit 1;;
esac
exit 0
@DPATCH@
--- a/ld/Makefile.am
+++ b/ld/Makefile.am
@@ -20,7 +20,7 @@ AM_CFLAGS = $(WARN_CFLAGS)
# We put the scripts in the directory $(scriptdir)/ldscripts.
# We can't put the scripts in $(datadir) because the SEARCH_DIR
# directives need to be different for native and cross linkers.
-scriptdir = $(tooldir)/lib
+scriptdir = $(libdir)
EMUL = @EMUL@
EMULATION_OFILES = @EMULATION_OFILES@
--- a/ld/Makefile.in
+++ b/ld/Makefile.in
@@ -269,7 +269,7 @@ AM_CFLAGS = $(WARN_CFLAGS)
# We put the scripts in the directory $(scriptdir)/ldscripts.
# We can't put the scripts in $(datadir) because the SEARCH_DIR
# directives need to be different for native and cross linkers.
-scriptdir = $(tooldir)/lib
+scriptdir = $(libdir)
BASEDIR = $(srcdir)/..
BFDDIR = $(BASEDIR)/bfd
INCDIR = $(BASEDIR)/include

View File

@ -1,42 +0,0 @@
#!/bin/sh -e
## 006_better_file_error.dpatch by David Kimdon <dwhedon@gordian.com>
##
## All lines beginning with `## DP:' are a description of the patch.
## DP: Specify which filename is causing an error if the filename is a
## DP: directory. (#45832)
if [ $# -ne 1 ]; then
echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
exit 1
fi
[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
case "$1" in
-patch) patch $patch_opts -p1 < $0;;
-unpatch) patch $patch_opts -p1 -R < $0;;
*)
echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
exit 1;;
esac
exit 0
@DPATCH@
--- a/bfd/opncls.c
+++ b/bfd/opncls.c
@@ -158,6 +158,13 @@ bfd_fopen (const char *filename, const c
{
bfd *nbfd;
const bfd_target *target_vec;
+ struct stat s;
+
+ if (stat (filename, &s) == 0)
+ if (S_ISDIR(s.st_mode)) {
+ bfd_set_error (bfd_error_file_not_recognized);
+ return NULL;
+ }
nbfd = _bfd_new_bfd ();
if (nbfd == NULL)

View File

@ -1,46 +0,0 @@
#!/bin/sh -e
## 012_check_ldrunpath_length.dpatch by Chris Chimelis <chris@debian.org>
##
## All lines beginning with `## DP:' are a description of the patch.
## DP: Only generate an RPATH entry if LD_RUN_PATH is not empty, for
## DP: cases where -rpath isn't specified. (#151024)
if [ $# -ne 1 ]; then
echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
exit 1
fi
[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
case "$1" in
-patch) patch $patch_opts -p1 < $0;;
-unpatch) patch $patch_opts -p1 -R < $0;;
*)
echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
exit 1;;
esac
exit 0
@DPATCH@
--- a/ld/emultempl/elf32.em
+++ b/ld/emultempl/elf32.em
@@ -970,6 +970,8 @@ cat >>e${EMULATION_NAME}.c <<EOF
&& command_line.rpath == NULL)
{
lib_path = (const char *) getenv ("LD_RUN_PATH");
+ if ((lib_path) && (strlen (lib_path) == 0))
+ lib_path = NULL;
if (gld${EMULATION_NAME}_search_needed (lib_path, &n,
force))
break;
@@ -1154,6 +1156,8 @@ gld${EMULATION_NAME}_before_allocation (
rpath = command_line.rpath;
if (rpath == NULL)
rpath = (const char *) getenv ("LD_RUN_PATH");
+ if ((rpath) && (strlen (rpath) == 0))
+ rpath = NULL;
if (! (bfd_elf_size_dynamic_sections
(output_bfd, command_line.soname, rpath,
command_line.filter_shlib,

View File

@ -1,11 +0,0 @@
--- a/bfd/elf32-mips.c
+++ b/bfd/elf32-mips.c
@@ -1617,7 +1617,7 @@ static const struct ecoff_debug_swap mip
/* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses
page sizes of up to that limit, so we need to respect it. */
-#define ELF_MAXPAGESIZE 0x10000
+#define ELF_MAXPAGESIZE 0x1000
#define elf32_bed elf32_tradbed
/* Include the target file again for this target. */

File diff suppressed because it is too large Load Diff

View File

@ -1,11 +0,0 @@
--- a/gas/config/tc-avr32.c
+++ b/gas/config/tc-avr32.c
@@ -3092,6 +3092,8 @@ static void s_cpool(int arg ATTRIBUTE_UN
/* Make sure the constant pool is properly aligned */
frag_align_code(2, 0);
+ if (bfd_get_section_alignment(stdoutput, pool->section) < 2)
+ bfd_set_section_alignment(stdoutput, pool->section, 2);
/* Assume none of the entries are discarded, and that we need the
maximum amount of alignment. But we're not going to allocate

View File

@ -1,21 +0,0 @@
--- a/bfd/elf32-cris.c
+++ b/bfd/elf32-cris.c
@@ -2709,12 +2709,12 @@ cris_elf_check_relocs (abfd, info, sec,
&& (sec->flags & SEC_READONLY) != 0)
{
/* FIXME: How do we make this optionally a warning only? */
- (*_bfd_error_handler)
- (_("%B, section %A:\n relocation %s should not"
- " be used in a shared object; recompile with -fPIC"),
- abfd,
- sec,
- cris_elf_howto_table[r_type].name);
+ // (*_bfd_error_handler)
+ //(_("%B, section %A:\n relocation %s should not"
+ // " be used in a shared object; recompile with -fPIC"),
+// abfd,
+// sec,
+// cris_elf_howto_table[r_type].name);
}
/* Fall through. */

View File

@ -1,15 +0,0 @@
--- a/ld/configure.tgt
+++ b/ld/configure.tgt
@@ -92,8 +92,10 @@ cr16c-*-elf*) targ_emul=elf32c
cris-*-*aout*) targ_emul=crisaout
targ_extra_emuls="criself crislinux"
targ_extra_libpath=$targ_extra_emuls ;;
-cris-*-linux-* | crisv32-*-linux-*)
- targ_emul=crislinux ;;
+cris-*-linux-* | crisv32-*-linux-*) targ_emul=crislinux
+ targ_extra_emuls="criself crisaout"
+ targ_extra_libpath=$targ_extra_emuls
+ ;;
cris-*-* | crisv32-*-*) targ_emul=criself
targ_extra_emuls="crisaout crislinux"
targ_extra_libpath=$targ_extra_emuls

View File

@ -1,87 +0,0 @@
Retrieved from http://sources.redhat.com/ml/binutils/2004-04/msg00646.html
Fixes
localealias.s:544: Error: junk at end of line, first unrecognized character is `,'
when building glibc-2.3.2 with gcc-3.4.0 and binutils-2.15.90.0.3
Paths adjusted to match crosstool's patcher.
Message-Id: m3n052qw2g.fsf@whitebox.m5r.de
From: Andreas Schwab <schwab at suse dot de>
To: Nathan Sidwell <nathan at codesourcery dot com>
Cc: Ian Lance Taylor <ian at wasabisystems dot com>, binutils at sources dot redhat dot com
Date: Fri, 23 Apr 2004 22:27:19 +0200
Subject: Re: demand_empty_rest_of_line and ignore_rest_of_line
Nathan Sidwell <nathan@codesourcery.com> writes:
> Index: read.c
> ===================================================================
> RCS file: /cvs/src/src/gas/read.c,v
> retrieving revision 1.76
> diff -c -3 -p -r1.76 read.c
> *** read.c 12 Mar 2004 17:48:12 -0000 1.76
> --- read.c 18 Mar 2004 09:56:05 -0000
> *************** read_a_source_file (char *name)
> *** 1053,1059 ****
> #endif
> input_line_pointer--;
> /* Report unknown char as ignored. */
> ! ignore_rest_of_line ();
> }
>
> #ifdef md_after_pass_hook
> --- 1053,1059 ----
> #endif
> input_line_pointer--;
> /* Report unknown char as ignored. */
> ! demand_empty_rest_of_line ();
> }
>
> #ifdef md_after_pass_hook
This means that the unknown character is no longer ignored, despite the
comment. As a side effect a line starting with a line comment character
not followed by APP in NO_APP mode now triggers an error instead of just a
warning, breaking builds of glibc on m68k-linux. Earlier in
read_a_source_file where #APP is handled there is another comment that
claims that unknown comments are ignored, when in fact they aren't (only
the initial line comment character is skipped).
Note that the presence of #APP will mess up the line counters, but
that appears to be difficult to fix.
Andreas.
2004-04-23 Andreas Schwab <schwab@suse.de>
* read.c (read_a_source_file): Ignore unknown text after line
comment character. Fix misleading comment.
--- a/gas/read.c
+++ b/gas/read.c
@@ -1008,10 +1008,14 @@ read_a_source_file (char *name)
unsigned int new_length;
char *tmp_buf = 0;
- bump_line_counters ();
s = input_line_pointer;
if (strncmp (s, "APP\n", 4))
- continue; /* We ignore it */
+ {
+ /* We ignore it */
+ ignore_rest_of_line ();
+ continue;
+ }
+ bump_line_counters ();
s += 4;
sb_new (&sbuf);
@@ -1110,7 +1114,7 @@ read_a_source_file (char *name)
continue;
#endif
input_line_pointer--;
- /* Report unknown char as ignored. */
+ /* Report unknown char as error. */
demand_empty_rest_of_line ();
}

View File

@ -1,24 +0,0 @@
diff -rdup binutils-2.18.50.0.3.orig/configure binutils-2.18.50.0.3/configure
--- binutils-2.18.50.0.3.orig/configure 2007-11-22 12:41:26.000000000 +0100
+++ binutils-2.18.50.0.3/configure 2007-11-22 12:45:01.000000000 +0100
@@ -2245,7 +2245,7 @@ case "${target}" in
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
libgloss_dir=arm
;;
- arm*-*-linux-gnueabi)
+ arm*-*-linux-*gnueabi)
noconfigdirs="$noconfigdirs target-qthreads"
noconfigdirs="$noconfigdirs target-libobjc"
case ${with_newlib} in
diff -rdup binutils-2.18.50.0.3.orig/configure.ac binutils-2.18.50.0.3/configure.ac
--- binutils-2.18.50.0.3.orig/configure.ac 2007-11-22 12:41:26.000000000 +0100
+++ binutils-2.18.50.0.3/configure.ac 2007-11-22 12:44:54.000000000 +0100
@@ -522,7 +522,7 @@ case "${target}" in
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
libgloss_dir=arm
;;
- arm*-*-linux-gnueabi)
+ arm*-*-linux-*gnueabi)
noconfigdirs="$noconfigdirs target-qthreads"
noconfigdirs="$noconfigdirs target-libobjc"
case ${with_newlib} in

View File

@ -1,42 +0,0 @@
diff -rdup binutils-2.18.50.0.9.old/configure binutils-2.18.50.0.9/configure
--- binutils-2.18.50.0.9.old/configure 2008-08-23 17:36:13.000000000 +0200
+++ binutils-2.18.50.0.9/configure 2008-10-14 14:25:22.000000000 +0200
@@ -2281,7 +2281,7 @@ case "${target}" in
am33_2.0-*-linux*)
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
;;
- sh-*-linux*)
+ sh*-*-linux*)
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
@@ -2606,7 +2606,7 @@ case "${target}" in
romp-*-*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
;;
- sh-*-* | sh64-*-*)
+ sh*-*-* | sh64-*-*)
case "${host}" in
i[3456789]86-*-vsta) ;; # don't add gprof back in
i[3456789]86-*-go32*) ;; # don't add gprof back in
diff -rdup binutils-2.18.50.0.9.old/configure.ac binutils-2.18.50.0.9/configure.ac
--- binutils-2.18.50.0.9.old/configure.ac 2008-08-23 17:36:13.000000000 +0200
+++ binutils-2.18.50.0.9/configure.ac 2008-10-14 14:25:11.000000000 +0200
@@ -530,7 +530,7 @@ case "${target}" in
am33_2.0-*-linux*)
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
;;
- sh-*-linux*)
+ sh*-*-linux*)
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
@@ -855,7 +855,7 @@ case "${target}" in
romp-*-*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
;;
- sh-*-* | sh64-*-*)
+ sh*-*-* | sh64-*-*)
case "${host}" in
i[[3456789]]86-*-vsta) ;; # don't add gprof back in
i[[3456789]]86-*-go32*) ;; # don't add gprof back in

View File

@ -1,24 +0,0 @@
diff -u binutils-2.17.50.0.17.oorig/ld/Makefile.am binutils-2.17.50.0.17/ld/Makefile.am
--- binutils-2.17.50.0.17.oorig/ld/Makefile.am 2007-06-18 19:29:29.000000000 +0200
+++ binutils-2.17.50.0.17/ld/Makefile.am 2007-06-25 10:00:36.000000000 +0200
@@ -18,7 +18,7 @@
# We put the scripts in the directory $(scriptdir)/ldscripts.
# We can't put the scripts in $(datadir) because the SEARCH_DIR
# directives need to be different for native and cross linkers.
-scriptdir = $(tooldir)/lib
+scriptdir = $(libdir)
EMUL = @EMUL@
EMULATION_OFILES = @EMULATION_OFILES@
diff -u binutils-2.17.50.0.17.oorig/ld/Makefile.in binutils-2.17.50.0.17/ld/Makefile.in
--- binutils-2.17.50.0.17.oorig/ld/Makefile.in 2007-06-18 19:29:29.000000000 +0200
+++ binutils-2.17.50.0.17/ld/Makefile.in 2007-06-25 10:00:36.000000000 +0200
@@ -287,7 +287,7 @@
# We put the scripts in the directory $(scriptdir)/ldscripts.
# We can't put the scripts in $(datadir) because the SEARCH_DIR
# directives need to be different for native and cross linkers.
-scriptdir = $(tooldir)/lib
+scriptdir = $(libdir)
BASEDIR = $(srcdir)/..
BFDDIR = $(BASEDIR)/bfd
INCDIR = $(BASEDIR)/include

View File

@ -1,21 +0,0 @@
diff -u binutils-2.17.50.0.17.oorig/ld/emultempl/elf32.em binutils-2.17.50.0.17/ld/emultempl/elf32.em
--- binutils-2.17.50.0.17.oorig/ld/emultempl/elf32.em 2007-06-18 19:31:40.000000000 +0200
+++ binutils-2.17.50.0.17/ld/emultempl/elf32.em 2007-06-25 10:01:25.000000000 +0200
@@ -1007,6 +1007,8 @@
&& command_line.rpath == NULL)
{
lib_path = (const char *) getenv ("LD_RUN_PATH");
+ if ((lib_path) && (strlen (lib_path) == 0))
+ lib_path = NULL;
if (gld${EMULATION_NAME}_search_needed (lib_path, &n,
force))
break;
@@ -1191,6 +1193,8 @@
rpath = command_line.rpath;
if (rpath == NULL)
rpath = (const char *) getenv ("LD_RUN_PATH");
+ if ((rpath) && (strlen (rpath) == 0))
+ rpath = NULL;
if (! (bfd_elf_size_dynamic_sections
(output_bfd, command_line.soname, rpath,
command_line.filter_shlib,