ar71xx: add support for GainStrong Oolite V5.2

GainStrong Oolite V5.2 is a small (39.5 x 78 mm), dual-band system on
module, based on Qualcomm QCA9531 + QCA9887. All QCA9531 SOC GPIOs are
available on castellated pins.

Specification:

- 650/400/200 MHz (CPU/DDR/AHB)
- 64/128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 5x 10/100 Mbps Ethernet (all ports available on castellated pins)
- 2T2R 2.4 GHz (QCA9531), with ext. PA and LNA
- 1T1R 5 GHz (QCA9887) with ext. FEM (SKY85710-11)
- 3x U.FL
- 1x USB 2.0

The dedicated development board includes 5 FE ports, USB 2.0 port, two
buttons (one directly connected to SOC reset input), header with all
GPIOs and several LEDs.

Flash instruction:

Vendor firmware is based on OpenWrt. LuCI or sysupgrade can be used to
flash OpenWrt firmware.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

target/linux/ar71xx/base-files/etc/board.d/02_network

@@ -29,6 +29,8 @@ ar71xx_setup_interfaces()
 	minibox-v1|\
 	mynet-n600|\
 	oolite-v1|\
+	oolite-v5.2|\
+	oolite-v5.2-dev|\
 	qihoo-c301|\
 	r602n|\
 	rb-750|\

target/linux/ar71xx/base-files/etc/diag.sh

@@ -205,6 +205,7 @@ get_status_led() {
 		status_led="$board:blue:status"
 		;;
 	e600g-v2|\
+	oolite-v5.2-dev|\
 	wifi-pineapple-nano)
 		status_led="$board:blue:system"
 		;;

target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -75,6 +75,8 @@ case "$FIRMWARE" in
 	dlan-pro-1200-ac|\
 	e1700ac-v2|\
 	e600gac-v2|\
+	oolite-v5.2|\
+	oolite-v5.2-dev|\
 	sr3200|\
 	xd3200)
 		ath10kcal_extract "art" 20480 2116

target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -865,6 +865,12 @@ ar71xx_board_detect() {
 	*"Packet Squirrel")
 		name="packet-squirrel"
 		;;
+	*"Oolite V5.2")
+		name="oolite-v5.2"
+		;;
+	*"Oolite V5.2-Dev")
+		name="oolite-v5.2-dev"
+		;;
 	*"PB42")
 		name="pb42"
 		;;

target/linux/ar71xx/base-files/lib/upgrade/platform.sh

@@ -399,6 +399,8 @@ platform_check_image() {
 	omy-x1|\
 	onion-omega|\
 	oolite-v1|\
+	oolite-v5.2|\
+	oolite-v5.2-dev|\
 	packet-squirrel|\
 	re355|\
 	re450|\

target/linux/ar71xx/config-4.4

@@ -124,6 +124,7 @@ CONFIG_ATH79=y
 # CONFIG_ATH79_MACH_GL_MIFI is not set
 # CONFIG_ATH79_MACH_GL_USB150 is not set
 # CONFIG_ATH79_MACH_GS_OOLITE_V1 is not set
+# CONFIG_ATH79_MACH_GS_OOLITE_V5_2 is not set
 # CONFIG_ATH79_MACH_HIVEAP_121 is not set
 # CONFIG_ATH79_MACH_HIWIFI_HC6361 is not set
 # CONFIG_ATH79_MACH_HORNET_UB is not set

target/linux/ar71xx/config-4.9

@@ -122,6 +122,7 @@ CONFIG_ATH79=y
 # CONFIG_ATH79_MACH_GL_MIFI is not set
 # CONFIG_ATH79_MACH_GL_USB150 is not set
 # CONFIG_ATH79_MACH_GS_OOLITE_V1 is not set
+# CONFIG_ATH79_MACH_GS_OOLITE_V5_2 is not set
 # CONFIG_ATH79_MACH_HIVEAP_121 is not set
 # CONFIG_ATH79_MACH_HIWIFI_HC6361 is not set
 # CONFIG_ATH79_MACH_HORNET_UB is not set

target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt

@@ -890,6 +890,17 @@ config ATH79_MACH_GS_OOLITE_V1
 	select ATH79_DEV_USB
 	select ATH79_DEV_WMAC
 
+config ATH79_MACH_GS_OOLITE_V5_2
+	bool "GainStrong Oolite V5.2 support"
+	select SOC_QCA953X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_HIVEAP_121
 	bool "Aerohive HiveAP-121 support"
 	select SOC_AR934X

target/linux/ar71xx/files/arch/mips/ath79/Makefile

@@ -132,6 +132,7 @@ obj-$(CONFIG_ATH79_MACH_GL_INET)		+= mach-gl-inet.o
 obj-$(CONFIG_ATH79_MACH_GL_MIFI)		+= mach-gl-mifi.o
 obj-$(CONFIG_ATH79_MACH_GL_USB150)		+= mach-gl-usb150.o
 obj-$(CONFIG_ATH79_MACH_GS_OOLITE_V1)		+= mach-gs-oolite-v1.o
+obj-$(CONFIG_ATH79_MACH_GS_OOLITE_V5_2)		+= mach-gs-oolite-v5-2.o
 obj-$(CONFIG_ATH79_MACH_HIVEAP_121)		+= mach-hiveap-121.o
 obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361)		+= mach-hiwifi-hc6361.o
 obj-$(CONFIG_ATH79_MACH_HORNET_UB)		+= mach-hornet-ub.o

target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v5-2.c

@@ -0,0 +1,111 @@
+/*
+ * GainStrong Oolite V5.2 module and development board support
+ *
+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define GS_OOLITE_V5_2_DEV_GPIO_BTN_RESET	17
+#define GS_OOLITE_V5_2_DEV_GPIO_LED_SYSTEM	13
+
+#define GS_KEYS_POLL_INTERVAL		20 /* msec */
+#define GS_KEYS_DEBOUNCE_INTERVAL	(3 * GS_KEYS_POLL_INTERVAL)
+
+#define GS_OOLITE_V5_2_WMAC_CALDATA_OFFSET	0x1000
+
+static const char *gs_oolite_v5_2_part_probes[] = {
+	"tp-link",
+	NULL,
+};
+
+static struct flash_platform_data gs_oolite_v5_2_flash_data = {
+	.part_probes = gs_oolite_v5_2_part_probes,
+};
+
+static struct gpio_led gs_oolite_v5_2_dev_gpio_leds[] __initdata = {
+	{
+		.name		= "oolite-v5.2-dev:blue:system",
+		.gpio		= GS_OOLITE_V5_2_DEV_GPIO_LED_SYSTEM,
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_button gs_oolite_v5_2_dev_gpio_keys[] __initdata = {
+	{
+		.desc			= "reset",
+		.type			= EV_KEY,
+		.code			= KEY_RESTART,
+		.debounce_interval	= GS_KEYS_DEBOUNCE_INTERVAL,
+		.gpio			= GS_OOLITE_V5_2_DEV_GPIO_BTN_RESET,
+		.active_low		= 1,
+	},
+};
+
+static void __init gs_oolite_v5_2_setup(void)
+{
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ath79_register_m25p80(&gs_oolite_v5_2_flash_data);
+
+	ath79_setup_ar933x_phy4_switch(false, false);
+
+	ath79_register_mdio(0, 0x0);
+
+	ath79_switch_data.phy4_mii_en = 1;
+	ath79_switch_data.phy_poll_mask |= BIT(4);
+
+	/* LAN */
+	ath79_eth1_data.duplex = DUPLEX_FULL;
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+	ath79_init_mac(ath79_eth1_data.mac_addr, art + 6, 0);
+	ath79_register_eth(1);
+
+	/* WAN */
+	ath79_eth0_data.duplex = DUPLEX_FULL;
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ath79_eth0_data.phy_mask = BIT(4);
+	ath79_eth0_data.speed = SPEED_100;
+	ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
+	ath79_register_eth(0);
+
+	ath79_register_pci();
+	ath79_register_usb();
+	ath79_register_wmac(art + GS_OOLITE_V5_2_WMAC_CALDATA_OFFSET, NULL);
+}
+
+static void __init gs_oolite_v5_2_dev_setup(void)
+{
+	gs_oolite_v5_2_setup();
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(gs_oolite_v5_2_dev_gpio_leds),
+				 gs_oolite_v5_2_dev_gpio_leds);
+
+	ath79_register_gpio_keys_polled(-1, GS_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(gs_oolite_v5_2_dev_gpio_keys),
+					gs_oolite_v5_2_dev_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_GS_OOLITE_V5_2, "OOLITE-V5-2",
+	     "GainStrong Oolite V5.2", gs_oolite_v5_2_setup);
+
+MIPS_MACHINE(ATH79_MACH_GS_OOLITE_V5_2_DEV, "OOLITE-V5-2-DEV",
+	     "GainStrong Oolite V5.2-Dev", gs_oolite_v5_2_dev_setup);

target/linux/ar71xx/files/arch/mips/ath79/machtypes.h

@@ -128,6 +128,8 @@ enum ath79_mach_type {
 	ATH79_MACH_GL_USB150,			/* GL.iNet GL-USB150 */
 	ATH79_MACH_GS_MINIBOX_V1,		/* GainStrong MiniBox V1.0 */
 	ATH79_MACH_GS_OOLITE_V1,		/* GainStrong Oolite V1.0 */
+	ATH79_MACH_GS_OOLITE_V5_2,		/* GainStrong Oolite V5.2 */
+	ATH79_MACH_GS_OOLITE_V5_2_DEV,		/* GainStrong Oolite V5.2-Dev */
 	ATH79_MACH_HIVEAP_121,			/* Aerohive HiveAP-121*/
 	ATH79_MACH_HIWIFI_HC6361,		/* HiWiFi HC6361 */
 	ATH79_MACH_HORNET_UB,			/* ALFA Networks Hornet-UB */

target/linux/ar71xx/generic/config-default

@@ -95,6 +95,7 @@ CONFIG_ATH79_MACH_GL_INET=y
 CONFIG_ATH79_MACH_GL_MIFI=y
 CONFIG_ATH79_MACH_GL_USB150=y
 CONFIG_ATH79_MACH_GS_OOLITE_V1=y
+CONFIG_ATH79_MACH_GS_OOLITE_V5_2=y
 CONFIG_ATH79_MACH_HIWIFI_HC6361=y
 CONFIG_ATH79_MACH_HORNET_UB=y
 CONFIG_ATH79_MACH_JA76PF=y

target/linux/ar71xx/image/generic.mk

@@ -852,6 +852,25 @@ define Device/oolite-v1
 endef
 TARGET_DEVICES += oolite-v1
 
+define Device/oolite-v5.2
+  $(Device/tplink-16mlzma)
+  DEVICE_TITLE := GainStrong Oolite V5.2
+  DEVICE_PACKAGES := ath10k-firmware-qca9887 kmod-ath10k kmod-usb-core kmod-usb2
+  BOARDNAME := OOLITE-V5-2
+  DEVICE_PROFILE := OOLITEV52
+  TPLINK_HWID := 0x3C00010B
+  IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += oolite-v5.2
+
+define Device/oolite-v5.2-dev
+  $(Device/oolite-v5.2)
+  DEVICE_TITLE := GainStrong Oolite V5.2-Dev (development board)
+  BOARDNAME := OOLITE-V5-2-DEV
+  DEVICE_PROFILE := OOLITEV52DEV
+endef
+TARGET_DEVICES += oolite-v5.2-dev
+
 define Device/omy-g1
   $(Device/tplink-16mlzma)
   DEVICE_TITLE := OMYlink OMY-G1