add initial support for 2.6.29

SVN-Revision: 15357

target/linux/ar71xx/config-2.6.29

@@ -0,0 +1,253 @@
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_ADM6996_PHY=y
+# CONFIG_AG71XX is not set
+# CONFIG_AR71XX_EARLY_SERIAL is not set
+CONFIG_AR71XX_MACH_AP81=y
+CONFIG_AR71XX_MACH_AP83=y
+CONFIG_AR71XX_MACH_AW_NR580=y
+CONFIG_AR71XX_MACH_GENERIC=y
+CONFIG_AR71XX_MACH_MZK_W04NU=y
+CONFIG_AR71XX_MACH_MZK_W300NH=y
+CONFIG_AR71XX_MACH_PB42=y
+CONFIG_AR71XX_MACH_RB_4XX=y
+CONFIG_AR71XX_MACH_TEW_632BRP=y
+CONFIG_AR71XX_MACH_TL_WR941ND=y
+CONFIG_AR71XX_MACH_UBNT=y
+CONFIG_AR71XX_MACH_WNR2000=y
+CONFIG_AR71XX_MACH_WP543=y
+CONFIG_AR71XX_WDT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ATHEROS_AR71XX=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BCM47XX is not set
+CONFIG_BITREVERSE=y
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 init=/etc/preinit"
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR2=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+# CONFIG_DCB is not set
+CONFIG_DEFAULT_VEGAS=y
+# CONFIG_DEFAULT_WESTWOOD is not set
+CONFIG_DEVPORT=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_FREEZER is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HW_HAS_PCI=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_I2C is not set
+CONFIG_ICPLUS_PHY=y
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_SOURCE="../../root"
+CONFIG_IRQ_CPU=y
+# CONFIG_ISDN is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_M25PXX_USE_FAST_READ is not set
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+CONFIG_MICREL_PHY=y
+# CONFIG_MIKROTIK_RB532 is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_COBALT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_CONCAT=y
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_RB4XX=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MYLOADER=y
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NEC_MARKEINS is not set
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MV88E6060=y
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_TAG_DSA is not set
+# CONFIG_NET_DSA_TAG_EDSA is not set
+CONFIG_NET_DSA_TAG_TRAILER=y
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_PHYLIB=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PROBE_INITRD_HEADER is not set
+CONFIG_PROM_EMU=y
+CONFIG_RTC_LIB=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SPI=y
+CONFIG_SPI_AR71XX=y
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_GPIO_OLD is not set
+CONFIG_SPI_MASTER=y
+# CONFIG_SPI_SPIDEV is not set
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+# CONFIG_TC35815 is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_TRAD_SIGNALS=y
+CONFIG_USB_SUPPORT=y
+CONFIG_ZONE_DMA_FLAG=0

target/linux/ar71xx/patches-2.6.29/001-ar71xx_core.patch

@@ -0,0 +1,50 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -602,6 +602,13 @@ else
+ load-$(CONFIG_CPU_CAVIUM_OCTEON) 	+= 0xffffffff81100000
+ endif
+ 
++#
++# Atheros AR71xx
++#
++core-$(CONFIG_ATHEROS_AR71XX)	+= arch/mips/ar71xx/
++cflags-$(CONFIG_ATHEROS_AR71XX)	+= -I$(srctree)/arch/mips/include/asm/mach-ar71xx
++load-$(CONFIG_ATHEROS_AR71XX)	+= 0xffffffff80060000
++
+ # temporary until string.h is fixed
+ cflags-y += -ffreestanding
+ 
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -22,6 +22,23 @@ choice
+ config MACH_ALCHEMY
+ 	bool "Alchemy processor based machines"
+ 
++config ATHEROS_AR71XX
++	bool "Atheros AR71xx based boards"
++	select CEVT_R4K
++	select CSRC_R4K
++	select DMA_NONCOHERENT
++	select HW_HAS_PCI
++	select IRQ_CPU
++	select ARCH_REQUIRE_GPIOLIB
++	select SYS_HAS_CPU_MIPS32_R1
++	select SYS_HAS_CPU_MIPS32_R2
++	select SYS_SUPPORTS_32BIT_KERNEL
++	select SYS_SUPPORTS_BIG_ENDIAN
++	select SYS_HAS_EARLY_PRINTK
++	select MIPS_MACHINE
++	help
++	  Support for Atheros AR71xx based boards.
++
+ config BASLER_EXCITE
+ 	bool "Basler eXcite smart camera"
+ 	select CEVT_R4K
+@@ -640,6 +657,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
+ endchoice
+ 
+ source "arch/mips/alchemy/Kconfig"
++source "arch/mips/ar71xx/Kconfig"
+ source "arch/mips/basler/excite/Kconfig"
+ source "arch/mips/jazz/Kconfig"
+ source "arch/mips/lasat/Kconfig"

target/linux/ar71xx/patches-2.6.29/002-ar71xx_pci.patch

@@ -0,0 +1,10 @@
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o
+ obj-$(CONFIG_NEC_MARKEINS)	+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
+ obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
+ obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
++obj-$(CONFIG_ATHEROS_AR71XX)	+= pci-ar71xx.o
+ 
+ #
+ # These are still pretty much in the old state, watch, go blind.

target/linux/ar71xx/patches-2.6.29/003-ar71xx_usb_host.patch

@@ -0,0 +1,58 @@
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -81,6 +81,13 @@ config USB_EHCI_BIG_ENDIAN_DESC
+ 	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
+ 	default y
+ 
++config USB_EHCI_AR71XX
++	bool "USB EHCI support for AR71xx"
++	depends on USB_EHCI_HCD && ATHEROS_AR71XX
++	default y
++	help
++	  Support for Atheros AR71xx built-in EHCI controller
++
+ config USB_EHCI_FSL
+ 	bool "Support for Freescale on-chip EHCI USB controller"
+ 	depends on USB_EHCI_HCD && FSL_SOC
+@@ -154,6 +161,13 @@ config USB_OHCI_HCD
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called ohci-hcd.
+ 
++config USB_OHCI_AR71XX
++	bool "USB OHCI support for Atheros AR71xx"
++	depends on USB_OHCI_HCD && ATHEROS_AR71XX
++	default y
++	help
++	  Support for Atheros AR71xx built-in OHCI controller
++
+ config USB_OHCI_HCD_PPC_SOC
+ 	bool "OHCI support for on-chip PPC USB controller"
+ 	depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1036,6 +1036,11 @@ MODULE_LICENSE ("GPL");
+ #define	PLATFORM_DRIVER		ixp4xx_ehci_driver
+ #endif
+ 
++#ifdef CONFIG_USB_EHCI_AR71XX
++#include "ehci-ar71xx.c"
++#define PLATFORM_DRIVER		ehci_ar71xx_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
+ #error "missing bus glue for ehci-hcd"
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1080,6 +1080,11 @@ MODULE_LICENSE ("GPL");
+ #define TMIO_OHCI_DRIVER	ohci_hcd_tmio_driver
+ #endif
+ 
++#ifdef CONFIG_USB_OHCI_AR71XX
++#include "ohci-ar71xx.c"
++#define PLATFORM_DRIVER		ohci_hcd_ar71xx_driver
++#endif
++
+ #if	!defined(PCI_DRIVER) &&		\
+ 	!defined(PLATFORM_DRIVER) &&	\
+ 	!defined(OF_PLATFORM_DRIVER) &&	\

target/linux/ar71xx/patches-2.6.29/004-ar71xx_spi_controller.patch

@@ -0,0 +1,26 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -53,6 +53,13 @@ if SPI_MASTER
+ 
+ comment "SPI Master Controller Drivers"
+ 
++config SPI_AR71XX
++	tristate "Atheros AR71xx SPI Controller"
++	depends on SPI_MASTER && ATHEROS_AR71XX
++	select SPI_BITBANG
++	help
++	  This is the SPI contoller driver for Atheros AR71xx.
++
+ config SPI_ATMEL
+ 	tristate "Atmel SPI Controller"
+ 	depends on (ARCH_AT91 || AVR32)
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -11,6 +11,7 @@ endif
+ obj-$(CONFIG_SPI_MASTER)		+= spi.o
+ 
+ # SPI master controller drivers (bus)
++obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o
+ obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
+ obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
+ obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o

target/linux/ar71xx/patches-2.6.29/005-ar71xx_mac_driver.patch

@@ -0,0 +1,21 @@
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -2068,6 +2068,8 @@ config ACENIC_OMIT_TIGON_I
+ 
+ 	  The safe and default value for this is N.
+ 
++source drivers/net/ag71xx/Kconfig
++
+ config DL2K
+ 	tristate "DL2000/TC902x-based Gigabit Ethernet support"
+ 	depends on PCI
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -2,6 +2,7 @@
+ # Makefile for the Linux network (ethercard) device drivers.
+ #
+ 
++obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_E1000) += e1000/
+ obj-$(CONFIG_E1000E) += e1000e/
+ obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/

target/linux/ar71xx/patches-2.6.29/006-ar71xx_wdt_driver.patch

@@ -0,0 +1,26 @@
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -766,6 +766,13 @@ config TXX9_WDT
+ 	help
+ 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+ 
++config AR71XX_WDT
++	tristate "Atheros AR71xx Watchdog Timer"
++	depends on ATHEROS_AR71XX
++	help
++	  Hardware driver for the built-in watchdog timer on the Atheros
++	  AR71xx SoCs.
++
+ # PARISC Architecture
+ 
+ # POWERPC Architecture
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -107,6 +107,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
++obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
+ 
+ # PARISC Architecture
+ 

target/linux/ar71xx/patches-2.6.29/100-mtd_m25p80_add_pm25lv_flash_support.patch

@@ -0,0 +1,13 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -504,6 +504,10 @@ static struct flash_info __devinitdata m
+ 	{ "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, },
+ 	{ "at26df321",  0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
+ 
++	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
++	{ "pm25lv512",         0, 32 * 1024, 2, SECT_4K },
++	{ "pm25lv010",         0, 32 * 1024, 4, SECT_4K },
++
+ 	/* Spansion -- single (large) sector size only, at least
+ 	 * for the chips listed here (without boot sectors).
+ 	 */

target/linux/ar71xx/patches-2.6.29/101-ksz8041_phy_driver.patch

@@ -0,0 +1,24 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -96,6 +96,11 @@ config ADM6996_PHY
+ config MVSWITCH_PHY
+ 	tristate "Driver for Marvell 88E6060 switches"
+ 
++config MICREL_PHY
++	tristate "Drivers for Micrel/Kendin PHYs"
++	---help---
++	  Currently has a driver for the KSZ8041
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
++obj-$(CONFIG_MICREL)		+= micrel.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
+ obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o

target/linux/ar71xx/patches-2.6.29/102-mtd_m25p80_add_myloader_parser.patch

@@ -0,0 +1,22 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -712,12 +712,17 @@ static int __devinit m25p_probe(struct s
+ 		struct mtd_partition	*parts = NULL;
+ 		int			nr_parts = 0;
+ 
++		static const char *part_probes[] = {
+ #ifdef CONFIG_MTD_CMDLINE_PARTS
+-		static const char *part_probes[] = { "cmdlinepart", NULL, };
++						"cmdlinepart",
++#endif
++#ifdef CONFIG_MTD_MYLOADER_PARTS
++						"MyLoader",
++#endif
++					       	NULL, };
+ 
+ 		nr_parts = parse_mtd_partitions(&flash->mtd,
+ 				part_probes, &parts, 0);
+-#endif
+ 
+ 		if (nr_parts <= 0 && data && data->parts) {
+ 			parts = data->parts;

target/linux/ar71xx/patches-2.6.29/103-mtd_m25p80_add_en25p32_support.patch

@@ -0,0 +1,12 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -504,6 +504,9 @@ static struct flash_info __devinitdata m
+ 	{ "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, },
+ 	{ "at26df321",  0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
+ 
++	/* EON -- en25px */
++	{ "en25p32", 0x1c2016, 0, 64 * 1024, 64, },
++
+ 	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
+ 	{ "pm25lv512",         0, 32 * 1024, 2, SECT_4K },
+ 	{ "pm25lv010",         0, 32 * 1024, 4, SECT_4K },

target/linux/ar71xx/patches-2.6.29/104-mtd_m25p80_add_redboot_parser.patch

@@ -0,0 +1,12 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -722,6 +722,9 @@ static int __devinit m25p_probe(struct s
+ #ifdef CONFIG_MTD_MYLOADER_PARTS
+ 						"MyLoader",
+ #endif
++#ifdef CONFIG_MTD_REDBOOT_PARTS
++						"RedBoot",
++#endif
+ 					       	NULL, };
+ 
+ 		nr_parts = parse_mtd_partitions(&flash->mtd,

target/linux/ar71xx/patches-2.6.29/105-mtd_m25p80_add_mx25lxxx_support.patch

@@ -0,0 +1,14 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -507,6 +507,11 @@ static struct flash_info __devinitdata m
+ 	/* EON -- en25px */
+ 	{ "en25p32", 0x1c2016, 0, 64 * 1024, 64, },
+ 
++	/* Macronix -- mx25lxxx */
++	{ "mx25l32",  0xc22016, 0, 64 * 1024,  64, },
++	{ "mx25l64",  0xc22017, 0, 64 * 1024, 128, },
++	{ "mx25l128", 0xc22018, 0, 64 * 1024, 256, },
++
+ 	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
+ 	{ "pm25lv512",         0, 32 * 1024, 2, SECT_4K },
+ 	{ "pm25lv010",         0, 32 * 1024, 4, SECT_4K },

target/linux/ar71xx/patches-2.6.29/106-mtd_m25p80_add_xxxs33b_support.patch

@@ -0,0 +1,14 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -512,6 +512,11 @@ static struct flash_info __devinitdata m
+ 	{ "mx25l64",  0xc22017, 0, 64 * 1024, 128, },
+ 	{ "mx25l128", 0xc22018, 0, 64 * 1024, 256, },
+ 
++	/* Numonyx -- xxxs33b */
++	{ "160s33b",  0x898911, 0, 64 * 1024,  64, },
++	{ "320s33b",  0x898912, 0, 64 * 1024, 128, },
++	{ "640s33b",  0x898913, 0, 64 * 1024, 256, },
++
+ 	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
+ 	{ "pm25lv512",         0, 32 * 1024, 2, SECT_4K },
+ 	{ "pm25lv010",         0, 32 * 1024, 4, SECT_4K },

target/linux/ar71xx/patches-2.6.29/110-usb-ehci-add-war-for-synopsys-hc-bug.patch

@@ -0,0 +1,22 @@
+--- a/drivers/usb/host/ehci-q.c
++++ b/drivers/usb/host/ehci-q.c
+@@ -1082,6 +1082,9 @@ static void end_unlink_async (struct ehc
+ 		ehci->reclaim = NULL;
+ 		start_unlink_async (ehci, next);
+ 	}
++
++	if (ehci->has_synopsys_hc_bug)
++		writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
+ }
+ 
+ /* makes sure the async qh will become idle */
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -125,6 +125,7 @@ struct ehci_hcd {			/* one per controlle
+ 	unsigned		big_endian_mmio:1;
+ 	unsigned		big_endian_desc:1;
+ 	unsigned		has_amcc_usb23:1;
++	unsigned		has_synopsys_hc_bug:1; /* Synopsys HC */
+ 
+ 	/* required for usb32 quirk */
+ 	#define OHCI_CTRL_HCFS          (3 << 6)

target/linux/ar71xx/patches-2.6.29/140-redboot_partition_scan.patch

@@ -0,0 +1,54 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
+ 	static char nullstring[] = "unallocated";
+ #endif
+ 
++	buf = vmalloc(master->erasesize);
++	if (!buf)
++		return -ENOMEM;
++
++ restart:
+ 	if ( directory < 0 ) {
+ 		offset = master->size + directory * master->erasesize;
+-		while (master->block_isbad && 
++		while (master->block_isbad &&
+ 		       master->block_isbad(master, offset)) {
+ 			if (!offset) {
+ 			nogood:
+ 				printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++				vfree(buf);
+ 				return -EIO;
+ 			}
+ 			offset -= master->erasesize;
+ 		}
+ 	} else {
+ 		offset = directory * master->erasesize;
+-		while (master->block_isbad && 
++		while (master->block_isbad &&
+ 		       master->block_isbad(master, offset)) {
+ 			offset += master->erasesize;
+ 			if (offset == master->size)
+ 				goto nogood;
+ 		}
+ 	}
+-	buf = vmalloc(master->erasesize);
+-
+-	if (!buf)
+-		return -ENOMEM;
+-
+ 	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ 	       master->name, offset);
+ 
+@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
+ 	}
+ 	if (i == numslots) {
+ 		/* Didn't find it */
++		if (offset + master->erasesize < master->size) {
++			/* not at the end of the flash yet, maybe next block :) */
++			directory++;
++			goto restart;
++		}
+ 		printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+ 		       master->name);
+ 		ret = 0;

target/linux/ar71xx/patches-2.6.29/200-rb4xx_nand_driver.patch

@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -427,4 +427,8 @@ config MTD_NAND_SH_FLCTL
+ 	  Several Renesas SuperH CPU has FLCTL. This option enables support
+ 	  for NAND Flash using FLCTL. This driver support SH7723.
+ 
++config MTD_NAND_RB4XX
++	tristate "NAND flash driver for RouterBoard 4xx series"
++	depends on MTD_NAND && ATHEROS_AR71XX
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= 
+ obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
+ obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
++obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
+ obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o

target/linux/ar71xx/patches-2.6.29/300-mips_fw_myloader.patch

@@ -0,0 +1,22 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -164,6 +164,7 @@ endif
+ #
+ libs-$(CONFIG_ARC)		+= arch/mips/fw/arc/
+ libs-$(CONFIG_CFE)		+= arch/mips/fw/cfe/
++libs-$(CONFIG_MYLOADER)		+= arch/mips/fw/myloader/
+ libs-$(CONFIG_SNIPROM)		+= arch/mips/fw/sni/
+ libs-y				+= arch/mips/fw/lib/
+ libs-$(CONFIG_SIBYTE_CFE)	+= arch/mips/sibyte/cfe/
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -825,6 +825,9 @@ config MIPS_NILE4
+ config MIPS_DISABLE_OBSOLETE_IDE
+ 	bool
+ 
++config MYLOADER
++	bool
++
+ config SYNC_R4K
+ 	bool
+ 

target/linux/ar71xx/patches-2.6.29/301-enable_prom_emulator.patch

@@ -0,0 +1,10 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -36,6 +36,7 @@ config ATHEROS_AR71XX
+ 	select SYS_SUPPORTS_BIG_ENDIAN
+ 	select SYS_HAS_EARLY_PRINTK
+ 	select MIPS_MACHINE
++	select PROM_EMU
+ 	help
+ 	  Support for Atheros AR71xx based boards.
+ 

target/linux/ar71xx/patches-2.6.29/901-get_c0_compare_irq_function.patch

@@ -0,0 +1,29 @@
+--- a/arch/mips/kernel/traps.c
++++ b/arch/mips/kernel/traps.c
+@@ -48,6 +48,7 @@
+ #include <asm/types.h>
+ #include <asm/stacktrace.h>
+ #include <asm/irq.h>
++#include <asm/time.h>
+ 
+ extern void check_wait(void);
+ extern asmlinkage void r4k_wait(void);
+@@ -1541,6 +1542,8 @@ void __cpuinit per_cpu_trap_init(void)
+ 	 */
+ 	if (cpu_has_mips_r2) {
+ 		cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
++		if (get_c0_compare_irq)
++			cp0_compare_irq = get_c0_compare_irq();
+ 		cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
+ 		if (cp0_perfcount_irq == cp0_compare_irq)
+ 			cp0_perfcount_irq = -1;
+--- a/arch/mips/include/asm/time.h
++++ b/arch/mips/include/asm/time.h
+@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
+  */
+ #ifdef CONFIG_CEVT_R4K_LIB
+ extern unsigned int __weak get_c0_compare_int(void);
++extern unsigned int __weak get_c0_compare_irq(void);
+ extern int r4k_clockevent_init(void);
+ #endif
+ 

target/linux/ar71xx/patches-2.6.29/902-mips_clocksource_init_war.patch

@@ -0,0 +1,56 @@
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -15,6 +15,22 @@
+ #include <asm/cevt-r4k.h>
+ 
+ /*
++ * Compare interrupt can be routed and latched outside the core,
++ * so a single execution hazard barrier may not be enough to give
++ * it time to clear as seen in the Cause register.  4 time the
++ * pipeline depth seems reasonably conservative, and empirically
++ * works better in configurations with high CPU/bus clock ratios.
++ */
++
++#define compare_change_hazard() \
++	do { \
++		irq_disable_hazard(); \
++		irq_disable_hazard(); \
++		irq_disable_hazard(); \
++		irq_disable_hazard(); \
++	} while (0)
++
++/*
+  * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
+  * of these routines with SMTC-specific variants.
+  */
+@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long
+ 	cnt = read_c0_count();
+ 	cnt += delta;
+ 	write_c0_compare(cnt);
++	compare_change_hazard();
+ 	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+ 	return res;
+ }
+@@ -99,22 +116,6 @@ static int c0_compare_int_pending(void)
+ 	return (read_c0_cause() >> cp0_compare_irq) & 0x100;
+ }
+ 
+-/*
+- * Compare interrupt can be routed and latched outside the core,
+- * so a single execution hazard barrier may not be enough to give
+- * it time to clear as seen in the Cause register.  4 time the
+- * pipeline depth seems reasonably conservative, and empirically
+- * works better in configurations with high CPU/bus clock ratios.
+- */
+-
+-#define compare_change_hazard() \
+-	do { \
+-		irq_disable_hazard(); \
+-		irq_disable_hazard(); \
+-		irq_disable_hazard(); \
+-		irq_disable_hazard(); \
+-	} while (0)
+-
+ int c0_compare_int_usable(void)
+ {
+ 	unsigned int delta;