mirror of https://github.com/hak5/openwrt.git
ramips: add support for Edimax EW-7476RPC / EW-7478AC
SoC: MediaTek MT7620a @ 580MHz RAM: 64M (Winbond W9751G6KB-25) FLASH: 8MB (Macronix) WiFi: SoC-integrated: MediaTek MT7620a bgn WiFi: MediaTek MT7612EN nac GbE: 1x (RTL8211E) BTN: WPS - RFKILL/RF 50%/RF 100% toggle LED: - Wifi 5g (blue) - Wifi 2g (blue) - Crossband (green) - Power (green) - WPS (green) - LAN (Green) UART: UART is present as Pads with throughholes on the PCB. They are located next to the switch for the wifi configuration 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation ------------ Update the factory image via the web-interfaces (by default: 192.168.9.2/24). http://192.168.9.2/index.asp ramips: add Edimax EW-7478AC SoC: MediaTek MT7620a @ 580MHz RAM: 64M (Winbond W9751G6KB-25) FLASH: 8MB (Macronix) WiFi: SoC-integrated: MediaTek MT7620a bgn WiFi: MediaTek MT7612EN nac GbE: 1x (RTL8211E) BTN: WPS - RFKILL/RF 50%/RF 100% toggle LED: - Wifi 5g (blue) - Wifi 2g (blue) - Crossband (green) - Power (green) - WPS (green) - LAN (Green) UART: UART is present as Pads with throughholes on the PCB. They are located next to the switch for the wifi configuration 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation ------------ Update the factory image via the web-interfaces (by default: http://edimaxext.setup) Or push wpa button on power on and send firmware via tftp to 192.168.1.6 The EW-7478AC is identical to the EW-7476RPC, except instead of 2 internal antennas it has 2 external ones. Signed-off-by: Birger Koblitz <mail@birger-koblitz.de> [merge conflict in 01_leds] Signed-off-by: Petr Štetiar <ynezz@true.cz>master
Birger Koblitz
Petr Štetiar
parent
080ba31eec
commit
88f7a29f99
|
|
@ -38,6 +38,10 @@ alfa-network,awusfree1|\
|
|||
edimax,br-6478ac-v2)
|
||||
set_wifi_led "$boardname:blue:wlan"
|
||||
;;
|
||||
edimax,ew-7476rpc|\
|
||||
edimax,ew-7478ac)
|
||||
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x20"
|
||||
;;
|
||||
alfa-network,tube-e4g)
|
||||
ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0"
|
||||
ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" "eth0"
|
||||
|
|
|
|||
|
|
@ -50,6 +50,8 @@ ramips_setup_interfaces()
|
|||
broadway|\
|
||||
dcs-930|\
|
||||
dcs-930l-b1|\
|
||||
edimax,ew-7476rpc|\
|
||||
edimax,ew-7478ac|\
|
||||
ht-tm02|\
|
||||
kimax,u35wf|\
|
||||
linkits7688 | \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,47 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "EW-747x.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "edimax,ew-7476rpc", "ralink,mt7620a-soc";
|
||||
model = "Edimax EW-7476RPC";
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "ew-7476rpc:green:power";
|
||||
gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "ew-7476rpc:green:lan";
|
||||
gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "ew-7476rpc:blue:wlan2g";
|
||||
gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1radio";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "ew-7476rpc:blue:wlan5g";
|
||||
gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0radio";
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "ew-7476rpc:green:wps";
|
||||
gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
crossband {
|
||||
label = "ew-7476rpc:green:crossband";
|
||||
gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1,46 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "EW-747x.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "edimax,ew-7478ac", "ralink,mt7620a-soc";
|
||||
model = "Edimax EW-7478ac";
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "ew-7478ac:green:power";
|
||||
gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "ew-7478ac:green:lan";
|
||||
gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "ew-7478ac:blue:wlan2g";
|
||||
gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1radio";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "ew-7478ac:blue:wlan5g";
|
||||
gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0radio";
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "ew-7478ac:green:wps";
|
||||
gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
crossband {
|
||||
label = "ew-7478ac:green:crossband";
|
||||
gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,192 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7620a.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "ralink,mt7620a-soc";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset_wps {
|
||||
label = "reset_wps";
|
||||
gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
switch_high {
|
||||
label = "switch high";
|
||||
gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
switch_off {
|
||||
label = "switch off";
|
||||
gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_1>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "cimage";
|
||||
reg = <0x50000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@70000 {
|
||||
compatible = "edimax,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x00070000 0x00790000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "i2c", "uartf", "nd_sd", "rgmii2";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
phy_reset_pins: phy-reset {
|
||||
gpio {
|
||||
ralink,group = "spi refclk";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
|
||||
status = "okay";
|
||||
mtd-mac-address = <&factory 0x4>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii1_pins &mdio_pins &phy_reset_pins>;
|
||||
|
||||
mediatek,portmap = "l";
|
||||
mediatek,mdio-mode = <1>;
|
||||
|
||||
phy-reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
phy-reset-duration = <30>;
|
||||
|
||||
port@5 {
|
||||
status = "okay";
|
||||
mediatek,fixed-link = <1000 1 1 1>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
mdio-bus {
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
status = "disabled";
|
||||
reg = <0>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
status = "disabled";
|
||||
reg = <1>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
phy2: ethernet-phy@2 {
|
||||
status = "disabled";
|
||||
reg = <2>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
phy3: ethernet-phy@3 {
|
||||
status = "disabled";
|
||||
reg = <3>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
status = "disabled";
|
||||
reg = <4>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsw {
|
||||
mediatek,port5 = "gmac";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
ralink,mtd-eeprom = <&factory 0>;
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
mediatek,2ghz = <0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -32,6 +32,9 @@
|
|||
#include <linux/bug.h>
|
||||
#include <linux/netfilter.h>
|
||||
#include <net/netfilter/nf_flow_table.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
|
||||
#include <asm/mach-ralink/ralink_regs.h>
|
||||
|
||||
|
|
@ -1333,6 +1336,35 @@ static int fe_stop(struct net_device *dev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static void fe_reset_phy(struct fe_priv *priv)
|
||||
{
|
||||
int err, msec = 30;
|
||||
struct gpio_desc *phy_reset;
|
||||
|
||||
phy_reset = devm_gpiod_get_optional(priv->dev, "phy-reset",
|
||||
GPIOD_OUT_HIGH);
|
||||
if (!phy_reset)
|
||||
return;
|
||||
|
||||
if (IS_ERR(phy_reset)) {
|
||||
dev_err(priv->dev, "Error acquiring reset gpio pins: %ld\n",
|
||||
PTR_ERR(phy_reset));
|
||||
return;
|
||||
}
|
||||
|
||||
err = of_property_read_u32(priv->dev->of_node, "phy-reset-duration",
|
||||
&msec);
|
||||
if (!err && msec > 1000)
|
||||
msec = 30;
|
||||
|
||||
if (msec > 20)
|
||||
msleep(msec);
|
||||
else
|
||||
usleep_range(msec * 1000, msec * 1000 + 1000);
|
||||
|
||||
gpiod_set_value(phy_reset, 0);
|
||||
}
|
||||
|
||||
static int __init fe_init(struct net_device *dev)
|
||||
{
|
||||
struct fe_priv *priv = netdev_priv(dev);
|
||||
|
|
@ -1348,6 +1380,8 @@ static int __init fe_init(struct net_device *dev)
|
|||
return -ENODEV;
|
||||
}
|
||||
|
||||
fe_reset_phy(priv);
|
||||
|
||||
mac_addr = of_get_mac_address(priv->dev->of_node);
|
||||
if (mac_addr)
|
||||
ether_addr_copy(dev->dev_addr, mac_addr);
|
||||
|
|
|
|||
|
|
@ -618,6 +618,30 @@ define Device/edimax_br-6478ac-v2
|
|||
endef
|
||||
TARGET_DEVICES += edimax_br-6478ac-v2
|
||||
|
||||
define Device/edimax_ew-7476rpc
|
||||
DTS := EW-7476RPC
|
||||
DEVICE_TITLE := Edimax EW-7476RPC
|
||||
BLOCKSIZE := 4k
|
||||
IMAGE_SIZE := 7744k
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
||||
edimax-header -s CSYS -m RN79 -f 0x70000 -S 0x01100000 | pad-rootfs | \
|
||||
append-metadata | check-size $$$$(IMAGE_SIZE)
|
||||
DEVICE_PACKAGES := kmod-mt76x2 kmod-phy-realtek
|
||||
endef
|
||||
TARGET_DEVICES += edimax_ew-7476rpc
|
||||
|
||||
define Device/edimax_ew-7478ac
|
||||
DTS := EW-7478AC
|
||||
DEVICE_TITLE := Edimax EW-7478AC
|
||||
BLOCKSIZE := 4k
|
||||
IMAGE_SIZE := 7744k
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
||||
edimax-header -s CSYS -m RN70 -f 0x70000 -S 0x01100000 | pad-rootfs | \
|
||||
append-metadata | check-size $$$$(IMAGE_SIZE)
|
||||
DEVICE_PACKAGES := kmod-mt76x2 kmod-phy-realtek
|
||||
endef
|
||||
TARGET_DEVICES += edimax_ew-7478ac
|
||||
|
||||
define Device/tplink_c2-v1
|
||||
$(Device/Archer)
|
||||
DTS := ArcherC2-v1
|
||||
|
|
|
|||
Loading…
Reference in New Issue