upgrade avr32 to 2.6.32

SVN-Revision: 19432

target/linux/avr32/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2007 OpenWrt.org
+# Copyright (C) 2007-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -10,7 +10,7 @@ ARCH:=avr32
 BOARD:=avr32
 BOARDNAME:=Atmel AVR32
 FEATURES:=squashfs
-LINUX_VERSION:=2.6.30.10
+LINUX_VERSION:=2.6.32.7
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/avr32/config-default

@@ -9,75 +9,75 @@ CONFIG_ARCH_REQUIRE_GPIOLIB=y
 # CONFIG_ARCH_SPARSEMEM_ENABLE is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ASYNC_TX_DMA is not set
 CONFIG_AT32AP700X_WDT=m
 # CONFIG_ATMEL_PWM is not set
 # CONFIG_ATMEL_SSC is not set
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 CONFIG_ATMEL_TCLIB=y
 CONFIG_AVR32=y
 CONFIG_BITREVERSE=y
-# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
 CONFIG_BOARD_ATNGW100=y
+CONFIG_BOARD_ATNGW100_ADDON_NONE=y
+# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
+# CONFIG_BOARD_ATNGW100_MRMT is not set
 # CONFIG_BOARD_ATSTK1000 is not set
 # CONFIG_BOARD_FAVR_32 is not set
 # CONFIG_BOARD_HAMMERHEAD is not set
 # CONFIG_BOARD_MERISC is not set
 # CONFIG_BOARD_MIMC200 is not set
-CONFIG_CLASSIC_RCU=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_CPU_AT32AP7000=y
 CONFIG_CPU_AT32AP700X=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_ENGINE=y
 CONFIG_DW_DMAC=y
 CONFIG_ENTRY_ADDRESS=0x90000000
+# CONFIG_FSNOTIFY is not set
 CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GPIOLIB=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_HAVE_ARCH_BOOTMEM is not set
 CONFIG_HAVE_CLK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_LEDS_GPIO=y
-CONFIG_LOAD_ADDRESS=0x10000000
 CONFIG_LOADER_U_BOOT=y
+CONFIG_LOAD_ADDRESS=0x10000000
 CONFIG_MACB=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
-CONFIG_MMC_ATMELMCI=m
-CONFIG_MMC_BLOCK=m
 CONFIG_MMC=m
+# CONFIG_MMC_AT91 is not set
+CONFIG_MMC_ATMELMCI=m
+# CONFIG_MMC_ATMELMCI_DMA is not set
+CONFIG_MMC_BLOCK=m
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_DATAFLASH=y
 # CONFIG_MTD_DATAFLASH_OTP is not set
 # CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_START=0x80000000
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
 # CONFIG_NET_DMA is not set
-CONFIG_NF_CT_ACCT=y
 # CONFIG_NMI_DEBUGGING is not set
 CONFIG_NO_HZ=y
 CONFIG_NR_QUICK=2
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PCI is not set
 CONFIG_PERFORMANCE_COUNTERS=y
 CONFIG_PHYLIB=y
 CONFIG_PHYS_OFFSET=0x10000000
@@ -85,20 +85,22 @@ CONFIG_PLATFORM_AT32AP=y
 CONFIG_QUICKLIST=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT32AP700X=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_SCHED_HRTICK=y
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SDIO_UART is not set
 # CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_SERIAL_ATMEL_PDC=y
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_ATMEL=y
+CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
 CONFIG_SPI_MASTER=y
 # CONFIG_SPI_SPIDEV is not set
-CONFIG_SPI=y
 CONFIG_SUBARCH_AVR32B=y
-# CONFIG_VGASTATE is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
 CONFIG_ZONE_DMA_FLAG=0

target/linux/avr32/patches/001-fix_usart_clash.patch

@@ -1,22 +0,0 @@
-Fix clash in ATMEL_USART_ flags
-
-At the moment ATMEL_USART_{RTS,CTS,CLK} have the values
-1, 2 and 3 respectively.  Given these are used in bitmasks,
-trying to turn on the CLK line will in fact turn on the
-RTS and CTS lines as well.
-
-Change the value of ATMEL_USART_CLK to 4.
-
-Signed-off-by: Ben Nizette <bn@niasdigital.com>
----
---- a/arch/avr32/mach-at32ap/include/mach/board.h
-+++ b/arch/avr32/mach-at32ap/include/mach/board.h
-@@ -29,7 +29,7 @@ extern struct platform_device *atmel_def
- /* Flags for selecting USART extra pins */
- #define	ATMEL_USART_RTS		0x01
- #define	ATMEL_USART_CTS		0x02
--#define	ATMEL_USART_CLK		0x03
-+#define	ATMEL_USART_CLK		0x04
- 
- struct atmel_uart_data {
- 	short		use_dma_tx;	/* use transmit DMA? */