mirror of https://github.com/hak5/openwrt.git
ramips: add support for Asus RT-AC65P
The Asus RT-AC65P router is identical with the RT-AC85P, but better to make separate images for it. On both routers the installation can be done also via SSH: Note: The user/password for SSH is identical with the one used in the Web-interface. 1. Complete the initial setup wizard. 2. Activate SSH under "Administration" -> "System". 3. Transfer the OpenWrt factory image via scp: > scp openwrt-ramips-mt7621-asus_rt-ac65p-squashfs-factory.bin admin@192.168.50.1:/tmp 4. Connect via SSH to the router. > ssh admin@192.168.50.1 5. Write the OpenWrt image to flash. > mtd-write -i /tmp/openwrt-ramips-mt7621-asus_rt-ac65p-squashfs-factory.bin -d linux 6. Reboot the router > reboot Changelog: v3: removed [] from filename, rebased to latest master v2: Rebased to latest master v1: Initial release Signed-off-by: Gabor Varga <vargagab@gmail.com>master
parent
49db2026e5
commit
7c5f712e4f
|
@ -234,6 +234,7 @@ ramips_setup_interfaces()
|
|||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:wan" "6@eth0"
|
||||
;;
|
||||
asus,rt-ac65p|\
|
||||
asus,rt-ac85p|\
|
||||
dlink,dir-860l-b1|\
|
||||
elecom,wrc-1167ghbk2-s|\
|
||||
|
@ -562,6 +563,7 @@ ramips_setup_macs()
|
|||
zbtlink,zbt-we3526)
|
||||
wan_mac=$(mtd_get_mac_binary factory 0xe006)
|
||||
;;
|
||||
asus,rt-ac65p|\
|
||||
asus,rt-ac85p)
|
||||
wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr)
|
||||
label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
|
||||
|
|
|
@ -18,6 +18,7 @@ platform_do_upgrade() {
|
|||
mikrotik,rbm33g)
|
||||
[ -z "$(rootfs_type)" ] && mtd erase firmware
|
||||
;;
|
||||
asus,rt-ac65p|\
|
||||
asus,rt-ac85p)
|
||||
echo "Backing up firmware"
|
||||
dd if=/dev/mtd4 bs=1024 count=4096 > /tmp/backup_firmware.bin
|
||||
|
@ -27,6 +28,7 @@ platform_do_upgrade() {
|
|||
esac
|
||||
|
||||
case "$board" in
|
||||
asus,rt-ac65p|\
|
||||
asus,rt-ac85p|\
|
||||
hiwifi,hc5962|\
|
||||
netgear,r6220|\
|
||||
|
|
|
@ -0,0 +1,9 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7621_asus_rt-acx5p.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "asus,rt-ac65p", "mediatek,mt7621-soc";
|
||||
model = "ASUS RT-AC65P";
|
||||
};
|
|
@ -1,162 +1,9 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "mt7621_asus_rt-acx5p.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "asus,rt-ac85p", "mediatek,mt7621-soc";
|
||||
model = "ASUS RT-AC85P";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
palmbus: palmbus@1E000000 {
|
||||
i2c@900 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "rt-ac85p:blue:power";
|
||||
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
wlan2g {
|
||||
label = "rt-ac85p:blue:wlan2g";
|
||||
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0radio";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "rt-ac85p:blue:wlan5g";
|
||||
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1radio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0xe0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@e0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0xe0000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@1e0000 {
|
||||
label = "factory";
|
||||
reg = <0x1e0000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory2: partition@2e0000 {
|
||||
label = "factory2";
|
||||
reg = <0x2e0000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3e0000 {
|
||||
label = "kernel";
|
||||
reg = <0x3e0000 0x400000>;
|
||||
};
|
||||
|
||||
partition@7e0000 {
|
||||
label = "ubi";
|
||||
reg = <0x7e0000 0x2e00000>;
|
||||
};
|
||||
|
||||
partition@35e0000 {
|
||||
label = "firmware2";
|
||||
reg = <0x35e0000 0x3200000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi0: wifi@0,0 {
|
||||
compatible = "pci14c3,7615";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi1: wifi@0,0 {
|
||||
compatible = "pci14c3,7615";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0xe000>;
|
||||
mediatek,portmap = "wllll";
|
||||
port@5 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "uart2", "uart3", "i2c";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
|
@ -0,0 +1,159 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
palmbus: palmbus@1E000000 {
|
||||
i2c@900 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "rt-ac85p:blue:power";
|
||||
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
wlan2g {
|
||||
label = "rt-ac85p:blue:wlan2g";
|
||||
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0radio";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "rt-ac85p:blue:wlan5g";
|
||||
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1radio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0xe0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@e0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0xe0000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@1e0000 {
|
||||
label = "factory";
|
||||
reg = <0x1e0000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory2: partition@2e0000 {
|
||||
label = "factory2";
|
||||
reg = <0x2e0000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3e0000 {
|
||||
label = "kernel";
|
||||
reg = <0x3e0000 0x400000>;
|
||||
};
|
||||
|
||||
partition@7e0000 {
|
||||
label = "ubi";
|
||||
reg = <0x7e0000 0x2e00000>;
|
||||
};
|
||||
|
||||
partition@35e0000 {
|
||||
label = "firmware2";
|
||||
reg = <0x35e0000 0x3200000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi0: wifi@0,0 {
|
||||
compatible = "pci14c3,7615";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi1: wifi@0,0 {
|
||||
compatible = "pci14c3,7615";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0xe000>;
|
||||
mediatek,portmap = "wllll";
|
||||
port@5 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "uart2", "uart3", "i2c";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
|
@ -125,6 +125,22 @@ define Device/asus_rt-ac57u
|
|||
endef
|
||||
TARGET_DEVICES += asus_rt-ac57u
|
||||
|
||||
define Device/asus_rt-ac65p
|
||||
MTK_SOC := mt7621
|
||||
DEVICE_VENDOR := ASUS
|
||||
DEVICE_MODEL := RT-AC65P
|
||||
IMAGE_SIZE := 51200k
|
||||
UBINIZE_OPTS := -E 5
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
KERNEL_SIZE := 4096k
|
||||
IMAGES += factory.bin
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE)
|
||||
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615e wpad-basic uboot-envtools
|
||||
endef
|
||||
TARGET_DEVICES += asus_rt-ac65p
|
||||
|
||||
define Device/asus_rt-ac85p
|
||||
MTK_SOC := mt7621
|
||||
DEVICE_VENDOR := ASUS
|
||||
|
|
Loading…
Reference in New Issue