package/mac80211: move all configuration items in submenus, merge Config.in* into the main Makefile

SVN-Revision: 20910

package/mac80211/Config.in

@@ -1,11 +0,0 @@
-# mac80211 configuration
-
-config PACKAGE_MAC80211_DEBUGFS
-	bool "Export mac80211 internals in DebugFS"
-	depends on PACKAGE_kmod-mac80211
-	default y
-	---help---
-	  Select this to see extensive information about
-	  the internal state of mac80211 in debugfs.
-
-	  Say N unless you know you need this.

package/mac80211/Config.in.ath9k

@@ -1,16 +0,0 @@
-# mac80211 configuration
-
-config PACKAGE_ATH9K_DEBUG
-	bool "ath9k debugging"
-	depends PACKAGE_kmod-ath9k && KERNEL_DEBUG_FS
-	---help---
-	  Say Y, if you need ath9k to display debug messages.
-	  Pass the debug mask as a module parameter:
-
-	  modprobe ath9k debug=0x00002000
-
-	  Look in ath9k/core.h for possible debug masks
-
-config PACKAGE_ATH9K_USE_MINSTREL
-	bool "use the new minstrel_ht rate control for ath9k"
-	depends PACKAGE_kmod-ath9k

package/mac80211/Config.in.b43

@@ -1,79 +0,0 @@
-# B43 configuration
-
-choice
-	prompt "b43 firmware version"
-	depends on PACKAGE_kmod-b43
-	default B43_EXPERIMENTAL
-	help
-	  This option allows you to select the version of the b43 firmware.
-
-config B43_STABLE
-	bool "4.150.10.5 (stable)"
-	help
-	  Stable firmware for BCM43xx devices.
-
-	  If unsure, select this.
-
-config B43_EXPERIMENTAL
-	bool "4.178.10.4 (experimental)"
-	help
-	  Experimental firmware for BCM43xx devices.
-
-	  This firmware is not tested as much as the "stable" firmware.
-
-	  If unsure, select the "stable" firmware.
-
-config B43_OPENFIRMWARE
-	bool "Open FirmWare for WiFi networks"
-	help
-	  Opensource firmware for BCM43xx devices.
-
-	  Do _not_ select this, unless you know what you are doing.
-	  The Opensource firmware is not suitable for embedded devices, yet.
-	  It does not support QoS, which is bad for AccessPoints.
-	  It does not support hardware crypto acceleration, which is a showstopper
-	  for embedded devices with low CPU resources.
-
-	  If unsure, select the "stable" firmware.
-
-endchoice
-
-config B43_FW_SQUASH
-	bool "Remove unnecessary firmware files"
-	depends on PACKAGE_kmod-b43 && !B43_OPENFIRMWARE
-	default y
-	help
-	  This options allows you to remove unnecessary b43 firmware files
-	  from the final rootfs image. This can reduce the rootfs size by
-	  up to 200k.
-
-	  If unsure, say Y.
-
-config B43_FW_SQUASH_COREREVS
-	string "Core revisions to include"
-	depends on PACKAGE_kmod-b43 && B43_FW_SQUASH
-	default "5,6,7,8,9,10,13,14,15"
-	help
-	  This is a comma seperated list of core revision numbers.
-	  Example (keep files for rev5 only):
-	         5
-	  Example (keep files for rev5 and rev11):
-	         5,11
-
-config B43_FW_SQUASH_PHYTYPES
-	string "PHY types to include"
-	depends on PACKAGE_kmod-b43 && B43_FW_SQUASH
-	default "G,LP"
-	help
-	  This is a comma seperated list of PHY types:
-	  A         => A-PHY
-	  AG        => Dual A-PHY G-PHY
-	  G         => G-PHY
-	  LP        => LP-PHY
-	  N         => N-PHY
-
-	  Example (keep files for G-PHY only):
-	         G
-	  Example (keep files for G-PHY and N-PHY):
-	         G,N
-

package/mac80211/Config.in.b43legacy

@@ -1,24 +0,0 @@
-# B43 configuration
-
-config B43LEGACY_FW_SQUASH
-	bool "Remove unnecessary firmware files"
-	depends on PACKAGE_kmod-b43legacy
-	default y
-	help
-	  This options allows you to remove unnecessary b43legacy firmware files
-	  from the final rootfs image. This can reduce the rootfs size by
-	  up to 50k.
-
-	  If unsure, say Y.
-
-config B43LEGACY_FW_SQUASH_COREREVS
-	string "Core revisions to include"
-	depends on PACKAGE_kmod-b43legacy && B43LEGACY_FW_SQUASH
-	default "1,2,3,4"
-	help
-	  This is a comma seperated list of core revision numbers.
-	  Example (keep files for rev4 only):
-	         4
-	  Example (keep files for rev2 and rev4):
-	         2,4
-

package/mac80211/Config.in.rt2x00

@@ -1,15 +0,0 @@
-# rt2x00 configuration
-
-config PACKAGE_RT2X00_LIB_DEBUGFS
-	bool "Enable rt2x00 debugfs support"
-	depends PACKAGE_kmod-rt2x00-lib && PACKAGE_MAC80211_DEBUGFS
-	---help---
-	  Enable creation of debugfs files for the rt2x00 drivers.
-	  These debugfs files support both reading and writing of the
-	  most important register types of the rt2x00 hardware.
-
-config PACKAGE_RT2X00_DEBUG
-	bool "Enable rt2x00 debug output"
-	depends PACKAGE_kmod-rt2x00-lib
-	---help---
-	  Enable debugging output for all rt2x00 modules

package/mac80211/Makefile

@@ -66,10 +66,23 @@ define KernelPackage/mac80211
   DEPENDS+= +kmod-crypto-core +kmod-crypto-arc4 +kmod-crypto-aes +kmod-cfg80211
   FILES:= $(PKG_BUILD_DIR)/net/mac80211/mac80211.$(LINUX_KMOD_SUFFIX)
   AUTOLOAD:=$(call AutoLoad,21,mac80211)
+  MENU:=1
 endef
 
 define KernelPackage/mac80211/config
-	source "$(SOURCE)/Config.in"
+	menu "Configuration"
+		depends on PACKAGE_kmod-mac80211
+
+	config PACKAGE_MAC80211_DEBUGFS
+		bool "Export mac80211 internals in DebugFS"
+		default y
+		help
+		  Select this to see extensive information about
+		  the internal state of mac80211 in debugfs.
+
+		  Say N unless you know you need this.
+
+	endmenu
 endef
 
 define KernelPackage/mac80211/description
@@ -186,10 +199,27 @@ $(call KernelPackage/rt2x00/Default)
   TITLE+= (LIB)
   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00lib.$(LINUX_KMOD_SUFFIX)
   AUTOLOAD:=$(call AutoLoad,25,rt2x00lib)
+  MENU:=1
 endef
 
 define KernelPackage/rt2x00-lib/config
-	source "$(SOURCE)/Config.in.rt2x00"
+	menu "Configuration"
+		depends PACKAGE_kmod-rt2x00-lib
+
+	config PACKAGE_RT2X00_LIB_DEBUGFS
+		bool "Enable rt2x00 debugfs support"
+		depends PACKAGE_MAC80211_DEBUGFS
+		help
+		  Enable creation of debugfs files for the rt2x00 drivers.
+		  These debugfs files support both reading and writing of the
+		  most important register types of the rt2x00 hardware.
+
+	config PACKAGE_RT2X00_DEBUG
+		bool "Enable rt2x00 debug output"
+		help
+		  Enable debugging output for all rt2x00 modules
+
+	endmenu
 endef
 
 define KernelPackage/rt2x00-pci
@@ -321,24 +351,27 @@ define KernelPackage/zd1211rw
 endef
 
 define KernelPackage/ath/config
+	menu "Configuration"
+		depends on PACKAGE_kmod-ath
 
 	config ATH_USER_REGD
 		bool "Force Atheros drivers to respect the user's regdomain settings"
-	depends on PACKAGE_kmod-ath
 		help
 		  Atheros' idea of regulatory handling is that the EEPROM of the card defines
 		  the regulatory limits and the user is only allowed to restrict the settings
 		  even further, even if the country allows frequencies or power levels that
 		  are forbidden by the EEPROM settings.
+
 		  Select this option if you want the driver to respect the user's decision about
 		  regulatory settings.
 
 	config PACKAGE_ATH_DEBUG
 		bool "Atheros wireless debugging"
-	depends on PACKAGE_kmod-ath
 		help
 		  Say Y, if you want to debug atheros wireless drivers.
 		  Right now only ath9k makes use of this.
+
+	endmenu
 endef
 
 define KernelPackage/ath
@@ -347,6 +380,7 @@ define KernelPackage/ath
   DEPENDS+= @PCI_SUPPORT +kmod-mac80211
   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.$(LINUX_KMOD_SUFFIX)
   AUTOLOAD:=$(call AutoLoad,26,ath)
+  MENU:=1
 endef
 
 define KernelPackage/ath/description
@@ -377,6 +411,7 @@ define KernelPackage/ath9k
 	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.$(LINUX_KMOD_SUFFIX) \
 	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.$(LINUX_KMOD_SUFFIX)
   AUTOLOAD:=$(call AutoLoad,27,ath9k_hw ath9k_common ath9k)
+  MENU:=1
 endef
 
 define KernelPackage/ath9k/description
@@ -385,7 +420,24 @@ Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets.
 endef
 
 define KernelPackage/ath9k/config
-	source "$(SOURCE)/Config.in.ath9k"
+	menu "Configuration"
+		depends PACKAGE_kmod-ath9k
+
+	config PACKAGE_ATH9K_DEBUG
+		bool "ath9k debugging"
+		depends KERNEL_DEBUG_FS
+		help
+		  Say Y, if you need ath9k to display debug messages.
+		  Pass the debug mask as a module parameter:
+
+		  modprobe ath9k debug=0x00002000
+
+		  Look in ath9k/core.h for possible debug masks
+
+	config PACKAGE_ATH9K_USE_MINSTREL
+		bool "use the new minstrel_ht rate control for ath9k"
+
+	endmenu
 endef
 
 USB8388FW_NAME:=usb8388
@@ -579,10 +631,93 @@ $(call KernelPackage/b43-common)
   TITLE:=Broadcom 43xx wireless support
   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43/b43.$(LINUX_KMOD_SUFFIX)
   AUTOLOAD:=$(call AutoLoad,30,b43)
+  MENU:=1
 endef
 
 define KernelPackage/b43/config
-	source "$(SOURCE)/Config.in.b43"
+	menu "Configuration"
+		depends on PACKAGE_kmod-b43
+
+	choice
+		prompt "b43 firmware version"
+		default B43_EXPERIMENTAL
+		help
+		  This option allows you to select the version of the b43 firmware.
+
+	config B43_STABLE
+		bool "4.150.10.5 (stable)"
+		help
+		  Stable firmware for BCM43xx devices.
+
+		  If unsure, select this.
+
+	config B43_EXPERIMENTAL
+		bool "4.178.10.4 (experimental)"
+		help
+		  Experimental firmware for BCM43xx devices.
+
+		  This firmware is not tested as much as the "stable" firmware.
+
+		  If unsure, select the "stable" firmware.
+
+	config B43_OPENFIRMWARE
+		bool "Open FirmWare for WiFi networks"
+		help
+		  Opensource firmware for BCM43xx devices.
+
+		  Do _not_ select this, unless you know what you are doing.
+		  The Opensource firmware is not suitable for embedded devices, yet.
+		  It does not support QoS, which is bad for AccessPoints.
+		  It does not support hardware crypto acceleration, which is a showstopper
+		  for embedded devices with low CPU resources.
+
+		  If unsure, select the "stable" firmware.
+
+	endchoice
+
+	config B43_FW_SQUASH
+		bool "Remove unnecessary firmware files"
+		depends on !B43_OPENFIRMWARE
+		default y
+		help
+		  This options allows you to remove unnecessary b43 firmware files
+		  from the final rootfs image. This can reduce the rootfs size by
+		  up to 200k.
+
+		  If unsure, say Y.
+
+	config B43_FW_SQUASH_COREREVS
+		string "Core revisions to include"
+		depends on B43_FW_SQUASH
+		default "5,6,7,8,9,10,13,14,15"
+		help
+		  This is a comma seperated list of core revision numbers.
+
+		  Example (keep files for rev5 only):
+		    5
+
+		  Example (keep files for rev5 and rev11):
+		    5,11
+
+	config B43_FW_SQUASH_PHYTYPES
+		string "PHY types to include"
+		depends on B43_FW_SQUASH
+		default "G,LP"
+		help
+		  This is a comma seperated list of PHY types:
+		    A  => A-PHY
+		    AG => Dual A-PHY G-PHY
+		    G  => G-PHY
+		    LP => LP-PHY
+		    N  => N-PHY
+
+		  Example (keep files for G-PHY only):
+		    G
+
+		  Example (keep files for G-PHY and N-PHY):
+		    G,N
+
+	endmenu
 endef
 
 define KernelPackage/b43/description
@@ -594,10 +729,37 @@ $(call KernelPackage/b43-common)
   TITLE:=Broadcom 43xx-legacy wireless support
   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43legacy/b43legacy.$(LINUX_KMOD_SUFFIX)
   AUTOLOAD:=$(call AutoLoad,30,b43legacy)
+  MENU:=1
 endef
 
 define KernelPackage/b43legacy/config
-	source "$(SOURCE)/Config.in.b43legacy"
+	menu "Configuration"
+		depends on PACKAGE_kmod-b43legacy
+
+	config B43LEGACY_FW_SQUASH
+		bool "Remove unnecessary firmware files"
+		default y
+		help
+		  This options allows you to remove unnecessary b43legacy firmware files
+		  from the final rootfs image. This can reduce the rootfs size by
+		  up to 50k.
+
+		  If unsure, say Y.
+
+	config B43LEGACY_FW_SQUASH_COREREVS
+		string "Core revisions to include"
+		depends on B43LEGACY_FW_SQUASH
+		default "1,2,3,4"
+		help
+		  This is a comma seperated list of core revision numbers.
+
+		  Example (keep files for rev4 only):
+		    4
+
+		  Example (keep files for rev2 and rev4):
+		    2,4
+
+	endmenu
 endef
 
 define KernelPackage/b43legacy/description