mirror of https://github.com/hak5/openwrt.git
ar71xx: enable SGMII fixup on Mikrotik wAP AC
fixes intermittent loss of connectivity on 1Gbit port, with log message:
> 803x_aneg_done: SGMII link is not ok
Thanks to David Bauer for pointing me in the right direction.
I just had to figure out the right bus_id, which you find in this log:
> ag71xx ag71xx.1: connected to PHY at gpio-1:00 [uid=004dd074,
driver=Atheros 8031 ethernet]
Fixes FS#2236
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
[Wrapped commit message - Fixed whitespace erors]
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 2a7519e29d
)
openwrt-19.07
parent
4022035aaf
commit
76a4c93f9d
|
@ -512,6 +512,18 @@ static struct platform_device rbwapgsc_phy_device = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct at803x_platform_data rbwapgsc_at803x_data = {
|
||||
.override_sgmii_aneg = 1,
|
||||
};
|
||||
|
||||
static struct mdio_board_info rbwapgsc_mdio_info[] = {
|
||||
{
|
||||
.bus_id = "gpio-1",
|
||||
.mdio_addr = RBWAPGSC_MDIO_PHYADDR,
|
||||
.platform_data = &rbwapgsc_at803x_data,
|
||||
},
|
||||
};
|
||||
|
||||
/* RB911L GPIOs */
|
||||
#define RB911L_GPIO_BTN_RESET 15
|
||||
#define RB911L_GPIO_LED_1 13
|
||||
|
@ -1106,10 +1118,14 @@ static void __init rbwapgsc_setup(void)
|
|||
|
||||
platform_device_register(&rbwapgsc_phy_device);
|
||||
|
||||
mdiobus_register_board_info(rbwapgsc_mdio_info,
|
||||
ARRAY_SIZE(rbwapgsc_mdio_info));
|
||||
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
|
||||
ath79_eth1_data.mii_bus_dev = &rbwapgsc_phy_device.dev;
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
||||
ath79_eth1_data.phy_mask = BIT(RBWAPGSC_MDIO_PHYADDR);
|
||||
ath79_eth1_data.enable_sgmii_fixup = 1;
|
||||
ath79_eth1_pll_data.pll_1000 = 0x03000101;
|
||||
ath79_eth1_pll_data.pll_100 = 0x80000101;
|
||||
ath79_eth1_pll_data.pll_10 = 0x80001313;
|
||||
|
|
Loading…
Reference in New Issue