mirror of https://github.com/hak5/openwrt.git
ath79: add support for Ubiquiti AirRouter
Indoor low-power router with 2.4 GHz radio CPU: Atheros AR7241 rev 1 RAM: 32 MB Flash: 8 MB NOR SPI Switch: Atheros AR7240 Ports: 1x WAN, 4x LAN 10/100 Ethernet WLAN: Atheros AR9285 (2.4 GHz) USB: 1x USB2 host port Note: Ethernet WAN/LAN port naming is reversed from ar71xx. WAN is eth0; LAN is eth1.1. UART settings: 115200, 8N1 LEDs +-------------------------- | | | | | | | | VCC | x x RX | * x | x x | x x TX | * x GND | * x | | | | +-------------------------- ETHERNET PORTS Installation from Ubiquiti firmware, is as for other ubnt-xm AirOs devices. Signed-off-by: Russell Senior <russell@personaltelco.net>openwrt-19.07
parent
20ec6af15e
commit
73127a878d
|
@ -124,7 +124,8 @@ ath79_setup_interfaces()
|
|||
buffalo,whr-g301n|\
|
||||
tplink,tl-mr3220-v1|\
|
||||
tplink,tl-mr3420-v1|\
|
||||
tplink,tl-wr841-v7)
|
||||
tplink,tl-wr841-v7|\
|
||||
ubnt,airrouter)
|
||||
ucidef_set_interface_wan "eth0"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
|
||||
|
|
|
@ -141,6 +141,7 @@ case "$FIRMWARE" in
|
|||
tplink,tl-wr741-v1|\
|
||||
tplink,tl-wr743nd-v1|\
|
||||
tplink,tl-wr841-v7|\
|
||||
ubnt,airrouter|\
|
||||
ubnt,bullet-m|\
|
||||
ubnt,nano-m|\
|
||||
ubnt,rocket-m)
|
||||
|
|
|
@ -0,0 +1,38 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "ar7241_ubnt_xm.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "ubnt,airrouter", "qca,ar7241";
|
||||
model = "Ubiquiti AirRouter";
|
||||
|
||||
aliases {
|
||||
led-boot = &globe;
|
||||
led-failsafe = &globe;
|
||||
led-running = &globe;
|
||||
led-upgrade = &globe;
|
||||
};
|
||||
|
||||
airrouter-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
globe: globe {
|
||||
label = "ubnt:green:globe";
|
||||
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
power {
|
||||
label = "ubnt:green:power";
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
|
@ -78,6 +78,13 @@ define Device/ubnt-xw
|
|||
ATH_SOC := ar9342
|
||||
endef
|
||||
|
||||
define Device/ubnt_airrouter
|
||||
$(Device/ubnt-xm)
|
||||
DEVICE_TITLE := Ubiquiti AirRouter
|
||||
SUPPORTED_DEVICES += airrouter
|
||||
endef
|
||||
TARGET_DEVICES += ubnt_airrouter
|
||||
|
||||
define Device/ubnt_bullet-m
|
||||
$(Device/ubnt-xm)
|
||||
DEVICE_TITLE := Ubiquiti Bullet-M
|
||||
|
|
Loading…
Reference in New Issue