hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

iw: update to version 4.7 

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
lede-17.01
Rafał Miłecki 2016-11-12 15:59:00 +01:00
parent 9cac5e8be0
commit 7305b55588
8 changed files with 48 additions and 634 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
package/network/utils/iw/Makefile
View File

@ -8,12 +8,12 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=iw
PKG_VERSION:=4.3
PKG_VERSION:=4.7
PKG_RELEASE:=1
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
PKG_SOURCE_URL:=@KERNEL/software/network/iw
PKG_MD5SUM:=7adec72e91ebdd9c55429fa34a23a6f5
PKG_MD5SUM:=c70b4500255c816b202e3561c901af4a
PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
PKG_LICENSE:=GPL-2.0

323
package/network/utils/iw/patches/001-nl80211_h_sync.patch
View File

@ -1,145 +1,9 @@
--- a/nl80211.h
+++ b/nl80211.h
@@ -10,6 +10,7 @@
* Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
* Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
* Copyright 2008 Colin McCabe <colin@cozybit.com>
+ * Copyright 2015 Intel Deutschland GmbH
@@ -1817,6 +1817,11 @@ enum nl80211_commands {
* @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported
* or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -321,14 +322,24 @@
* @NL80211_CMD_GET_SCAN: get scan results
* @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
* %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- * probe requests at CCK rate or not.
+ * probe requests at CCK rate or not. %NL80211_ATTR_MAC can be used to
+ * specify a BSSID to scan for; if not included, the wildcard BSSID will
+ * be used.
* @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
* NL80211_CMD_GET_SCAN and on the "scan" multicast group)
* @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
* partial scan results may be available
*
* @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
- * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
+ * intervals and certain number of cycles, as specified by
+ * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
+ * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
+ * scheduled scan will run in an infinite loop with the specified interval.
+ * These attributes are mutually exculsive,
+ * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
+ * NL80211_ATTR_SCHED_SCAN_PLANS is defined.
+ * If for some reason scheduled scan is aborted by the driver, all scan
+ * plans are canceled (including scan plans that did not start yet).
* Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
* are passed, they are used in the probe requests. For
* broadcast, a broadcast SSID must be passed (ie. an empty
@@ -418,7 +429,11 @@
* @NL80211_CMD_ASSOCIATE: association request and notification; like
* NL80211_CMD_AUTHENTICATE but for Association and Reassociation
* (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
- * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
+ * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The
+ * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the
+ * request is for the initial association to an ESS (that attribute not
+ * included) or for reassociation within the ESS (that attribute is
+ * included).
* @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
* NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
* MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
@@ -468,6 +483,9 @@
* set of BSSID,frequency parameters is used (i.e., either the enforcing
* %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
* %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
+ * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within
+ * the ESS in case the device is already associated and an association with
+ * a different BSS is desired.
* Background scan period can optionally be
* specified in %NL80211_ATTR_BG_SCAN_PERIOD,
* if not specified default background scan configuration
@@ -811,6 +829,10 @@
* as an event to indicate changes for devices with wiphy-specific regdom
* management.
*
+ * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is
+ * not running. The driver indicates the status of the scan through
+ * cfg80211_scan_done().
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -997,6 +1019,8 @@ enum nl80211_commands {
NL80211_CMD_WIPHY_REG_CHANGE,
+ NL80211_CMD_ABORT_SCAN,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1270,8 +1294,11 @@ enum nl80211_commands {
* @NL80211_ATTR_RESP_IE: (Re)association response information elements as
* sent by peer, for ROAM and successful CONNECT events.
*
- * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
- * commands to specify using a reassociate frame
+ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT
+ * commands to specify a request to reassociate within an ESS, i.e., to use
+ * Reassociate Request frame (with the value of this attribute in the
+ * Current AP address field) instead of Association Request frame which is
+ * used for the initial association to an ESS.
*
* @NL80211_ATTR_KEY: key information in a nested attribute with
* %NL80211_KEY_* sub-attributes
@@ -1712,6 +1739,8 @@ enum nl80211_commands {
* underlying device supports these minimal RRM features:
* %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES,
* %NL80211_FEATURE_QUIET,
+ * Or, if global RRM is supported, see:
+ * %NL80211_EXT_FEATURE_RRM
* If this flag is used, driver must add the Power Capabilities IE to the
* association request. In addition, it must also set the RRM capability
* flag in the association request's Capability Info field.
@@ -1755,12 +1784,44 @@ enum nl80211_commands {
* over all channels.
*
* @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a
- * scheduled scan (or a WoWLAN net-detect scan) is started, u32
- * in seconds.
+ * scheduled scan is started. Or the delay before a WoWLAN
+ * net-detect scan is started, counting from the moment the
+ * system is suspended. This value is a u32, in seconds.
* @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
* is operating in an indoor environment.
*
+ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for
+ * scheduled scan supported by the device (u32), a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for
+ * a scan plan (u32), a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in
+ * a scan plan (u32), a wiphy attribute.
+ * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan.
+ * Each scan plan defines the number of scan iterations and the interval
+ * between scans. The last scan plan will always run infinitely,
+ * thus it must not specify the number of iterations, only the interval
+ * between scans. The scan plans are executed sequentially.
+ * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
+ * @NL80211_ATTR_PBSS: flag attribute. If set it means operate
+ * in a PBSS. Specified in %NL80211_CMD_CONNECT to request
+ * connecting to a PCP, and in %NL80211_CMD_START_AP to start
+ * a PCP instead of AP. Relevant for DMG networks only.
+ * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the
+ * BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains
+ * attributes according &enum nl80211_bss_select_attr to indicate what
+ * BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT
+ * it contains the behaviour-specific attribute containing the parameters for
+ * BSS selection to be done by driver and/or firmware.
+ *
+ * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported
+ * or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status
+ *
+ * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
@ -148,21 +12,10 @@
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2130,6 +2191,21 @@ enum nl80211_attrs {
@@ -2197,6 +2202,10 @@ enum nl80211_attrs {
NL80211_ATTR_REG_INDOOR,
NL80211_ATTR_STA_SUPPORT_P2P_PS,
+ NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS,
+ NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL,
+ NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
+ NL80211_ATTR_SCHED_SCAN_PLANS,
+
+ NL80211_ATTR_PBSS,
+
+ NL80211_ATTR_BSS_SELECT,
+
+ NL80211_ATTR_STA_SUPPORT_P2P_PS,
+
+ NL80211_ATTR_PAD,
+
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
@ -170,47 +23,23 @@
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2273,6 +2349,20 @@ enum nl80211_sta_flags {
NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
};
+/**
+ * enum nl80211_sta_p2p_ps_status - station support of P2P PS
+ *
+ * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
+ * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
+ * @NUM_NL80211_P2P_PS_STATUS: number of values
+ */
+enum nl80211_sta_p2p_ps_status {
+ NL80211_P2P_PS_UNSUPPORTED = 0,
+ NL80211_P2P_PS_SUPPORTED,
+
+ NUM_NL80211_P2P_PS_STATUS,
+};
+
#define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER
/**
@@ -2430,6 +2520,9 @@ enum nl80211_sta_bss_param {
* TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
* each one of those is again nested with &enum nl80211_tid_stats
@@ -2513,6 +2522,7 @@ enum nl80211_sta_bss_param {
* attributes carrying the actual values.
+ * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
+ * received from the station (u64, usec)
* @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
* received from the station (u64, usec)
+ * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
@@ -2466,6 +2559,8 @@ enum nl80211_sta_info {
NL80211_STA_INFO_BEACON_RX,
@@ -2550,6 +2560,7 @@ enum nl80211_sta_info {
NL80211_STA_INFO_BEACON_SIGNAL_AVG,
NL80211_STA_INFO_TID_STATS,
+ NL80211_STA_INFO_RX_DURATION,
NL80211_STA_INFO_RX_DURATION,
+ NL80211_STA_INFO_PAD,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
@@ -2482,6 +2577,7 @@ enum nl80211_sta_info {
@@ -2566,6 +2577,7 @@ enum nl80211_sta_info {
* transmitted MSDUs (not counting the first attempt; u64)
* @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
* MSDUs (u64)
@ -218,7 +47,7 @@
* @NUM_NL80211_TID_STATS: number of attributes here
* @NL80211_TID_STATS_MAX: highest numbered attribute here
*/
@@ -2491,6 +2587,7 @@ enum nl80211_tid_stats {
@@ -2575,6 +2587,7 @@ enum nl80211_tid_stats {
NL80211_TID_STATS_TX_MSDU,
NL80211_TID_STATS_TX_MSDU_RETRIES,
NL80211_TID_STATS_TX_MSDU_FAILED,
@ -226,7 +55,7 @@
/* keep last */
NUM_NL80211_TID_STATS,
@@ -2927,6 +3024,7 @@ enum nl80211_user_reg_hint_type {
@@ -3011,6 +3024,7 @@ enum nl80211_user_reg_hint_type {
* transmitting data (on channel or globally)
* @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
* (on this channel or globally)
@ -234,7 +63,7 @@
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
* currently defined
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
@@ -2942,6 +3040,7 @@ enum nl80211_survey_info {
@@ -3026,6 +3040,7 @@ enum nl80211_survey_info {
NL80211_SURVEY_INFO_TIME_RX,
NL80211_SURVEY_INFO_TIME_TX,
NL80211_SURVEY_INFO_TIME_SCAN,
@ -242,131 +71,19 @@
/* keep last */
__NL80211_SURVEY_INFO_AFTER_LAST,
@@ -3364,6 +3463,10 @@ enum nl80211_bss_scan_width {
* (not present if no beacon frame has been received yet)
* @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
* @NL80211_BSS_TSF is known to be from a probe response (flag attribute)
+ * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
+ * was last updated by a received frame. The value is expected to be
+ * accurate to about 10ms. (u64, nanoseconds)
@@ -3451,6 +3466,7 @@ enum nl80211_bss_scan_width {
* @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
* was last updated by a received frame. The value is expected to be
* accurate to about 10ms. (u64, nanoseconds)
+ * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
* @__NL80211_BSS_AFTER_LAST: internal
* @NL80211_BSS_MAX: highest BSS attribute
*/
@@ -3383,6 +3486,8 @@ enum nl80211_bss {
NL80211_BSS_CHAN_WIDTH,
@@ -3471,6 +3487,7 @@ enum nl80211_bss {
NL80211_BSS_BEACON_TSF,
NL80211_BSS_PRESP_DATA,
+ NL80211_BSS_LAST_SEEN_BOOTTIME,
NL80211_BSS_LAST_SEEN_BOOTTIME,
+ NL80211_BSS_PAD,
/* keep last */
__NL80211_BSS_AFTER_LAST,
@@ -3568,11 +3673,15 @@ enum nl80211_txrate_gi {
* @NL80211_BAND_2GHZ: 2.4 GHz ISM band
* @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
* @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
+ * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
+ * since newer kernel versions may support more bands
*/
enum nl80211_band {
NL80211_BAND_2GHZ,
NL80211_BAND_5GHZ,
NL80211_BAND_60GHZ,
+
+ NUM_NL80211_BANDS,
};
/**
@@ -4358,12 +4467,18 @@ enum nl80211_feature_flags {
/**
* enum nl80211_ext_feature_index - bit index of extended features.
* @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
+ * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can
+ * can request to use RRM (see %NL80211_ATTR_USE_RRM) with
+ * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
+ * the ASSOC_REQ_USE_RRM flag in the association request even if
+ * NL80211_FEATURE_QUIET is not advertized.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_VHT_IBSS,
+ NL80211_EXT_FEATURE_RRM,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -4589,4 +4704,72 @@ enum nl80211_tdls_peer_capability {
NL80211_TDLS_PEER_WMM = 1<<2,
};
+/**
+ * enum nl80211_sched_scan_plan - scanning plan for scheduled scan
+ * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In
+ * seconds (u32).
+ * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this
+ * scan plan (u32). The last scan plan must not specify this attribute
+ * because it will run infinitely. A value of zero is invalid as it will
+ * make the scan plan meaningless.
+ * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number
+ * currently defined
+ * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use
+ */
+enum nl80211_sched_scan_plan {
+ __NL80211_SCHED_SCAN_PLAN_INVALID,
+ NL80211_SCHED_SCAN_PLAN_INTERVAL,
+ NL80211_SCHED_SCAN_PLAN_ITERATIONS,
+
+ /* keep last */
+ __NL80211_SCHED_SCAN_PLAN_AFTER_LAST,
+ NL80211_SCHED_SCAN_PLAN_MAX =
+ __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
+};
+
+/**
+ * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.
+ *
+ * @band: band of BSS that must match for RSSI value adjustment.
+ * @delta: value used to adjust the RSSI value of matching BSS.
+ */
+struct nl80211_bss_select_rssi_adjust {
+ __u8 band;
+ __s8 delta;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_bss_select_attr - attributes for bss selection.
+ *
+ * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved.
+ * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection
+ * is requested.
+ * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS
+ * selection should be done such that the specified band is preferred.
+ * When there are multiple BSS-es in the preferred band, the driver
+ * shall use RSSI-based BSS selection as a second step. The value of
+ * this attribute is according to &enum nl80211_band (u32).
+ * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for
+ * BSS-es in the specified band is to be adjusted before doing
+ * RSSI-based BSS selection. The attribute value is a packed structure
+ * value as specified by &struct nl80211_bss_select_rssi_adjust.
+ * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.
+ * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use.
+ *
+ * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT
+ * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour
+ * which the driver shall use.
+ */
+enum nl80211_bss_select_attr {
+ __NL80211_BSS_SELECT_ATTR_INVALID,
+ NL80211_BSS_SELECT_ATTR_RSSI,
+ NL80211_BSS_SELECT_ATTR_BAND_PREF,
+ NL80211_BSS_SELECT_ATTR_RSSI_ADJUST,
+
+ /* keep last */
+ __NL80211_BSS_SELECT_ATTR_AFTER_LAST,
+ NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1
+};
+
#endif /* __LINUX_NL80211_H */

2
package/network/utils/iw/patches/120-antenna_gain.patch
View File

@ -1,6 +1,6 @@
--- a/phy.c
+++ b/phy.c
@@ -524,3 +524,30 @@ COMMAND(set, antenna, "<bitmap> | all |
@@ -523,3 +523,30 @@ COMMAND(set, antenna, "<bitmap> | all |
NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna,
"Set a bitmap of allowed antennas to use for TX and RX.\n"
"The driver may reject antenna configurations it cannot support.");

46
package/network/utils/iw/patches/200-reduce_size.patch
View File

@ -1,6 +1,6 @@
--- a/Makefile
+++ b/Makefile
@@ -15,8 +15,8 @@ CFLAGS += -Wall -Wundef -Wstrict-prototy
@@ -16,8 +16,8 @@ CFLAGS += -Wall -Wundef -Wstrict-prototy
OBJS = iw.o genl.o event.o info.o phy.o \
interface.o ibss.o station.o survey.o util.o ocb.o \
mesh.o mpath.o mpp.o scan.o reg.o version.o \
@ -51,7 +51,7 @@
--- a/info.c
+++ b/info.c
@@ -219,6 +219,7 @@ next:
@@ -217,6 +217,7 @@ next:
}
}
@ -59,7 +59,7 @@
if (tb_band[NL80211_BAND_ATTR_RATES]) {
printf("\t\tBitrates (non-HT):\n");
nla_for_each_nested(nl_rate, tb_band[NL80211_BAND_ATTR_RATES], rem_rate) {
@@ -235,6 +236,7 @@ next:
@@ -233,6 +234,7 @@ next:
printf("\n");
}
}
@ -67,7 +67,7 @@
}
}
@@ -291,6 +293,7 @@ next:
@@ -298,6 +300,7 @@ next:
printf("\tCoverage class: %d (up to %dm)\n", coverage, 450 * coverage);
}
@ -75,7 +75,7 @@
if (tb_msg[NL80211_ATTR_CIPHER_SUITES]) {
int num = nla_len(tb_msg[NL80211_ATTR_CIPHER_SUITES]) / sizeof(__u32);
int i;
@@ -302,6 +305,7 @@ next:
@@ -309,6 +312,7 @@ next:
cipher_name(ciphers[i]));
}
}
@ -83,7 +83,7 @@
if (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX] &&
tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX])
@@ -321,11 +325,13 @@ next:
@@ -328,11 +332,13 @@ next:
printf("\t\t * %s\n", iftype_name(nla_type(nl_mode)));
}
@ -97,7 +97,7 @@
if (tb_msg[NL80211_ATTR_INTERFACE_COMBINATIONS]) {
struct nlattr *nl_combi;
@@ -422,6 +428,7 @@ broken_combination:
@@ -429,6 +435,7 @@ broken_combination:
printf("\tinterface combinations are not supported\n");
}
@ -105,7 +105,7 @@
if (tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS]) {
printf("\tSupported commands:\n");
nla_for_each_nested(nl_cmd, tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS], rem_cmd)
@@ -518,6 +525,7 @@ broken_combination:
@@ -526,6 +533,7 @@ broken_combination:
printf("\t\t * wake up on TCP connection\n");
}
}
@ -113,7 +113,7 @@
if (tb_msg[NL80211_ATTR_ROAM_SUPPORT])
printf("\tDevice supports roaming.\n");
@@ -554,6 +562,7 @@ broken_combination:
@@ -564,6 +572,7 @@ broken_combination:
}
}
@ -121,7 +121,7 @@
if (tb_msg[NL80211_ATTR_FEATURE_FLAGS]) {
unsigned int features = nla_get_u32(tb_msg[NL80211_ATTR_FEATURE_FLAGS]);
@@ -612,6 +621,7 @@ broken_combination:
@@ -622,6 +631,7 @@ broken_combination:
if (features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH)
printf("\tDevice supports TDLS channel switching\n");
}
@ -129,7 +129,7 @@
if (tb_msg[NL80211_ATTR_EXT_FEATURES]) {
struct nlattr *tb = tb_msg[NL80211_ATTR_EXT_FEATURES];
@@ -668,6 +678,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
@@ -678,6 +688,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
"List all wireless devices and their capabilities.");
TOPLEVEL(phy, NULL, NL80211_CMD_GET_WIPHY, NLM_F_DUMP, CIB_NONE, handle_info, NULL);
@ -137,7 +137,7 @@
static int handle_commands(struct nl80211_state *state, struct nl_msg *msg,
int argc, char **argv, enum id_input id)
{
@@ -679,6 +690,7 @@ static int handle_commands(struct nl8021
@@ -689,6 +700,7 @@ static int handle_commands(struct nl8021
}
TOPLEVEL(commands, NULL, NL80211_CMD_GET_WIPHY, 0, CIB_NONE, handle_commands,
"list all known commands and their decimal & hex value");
@ -147,7 +147,7 @@
{
--- a/scan.c
+++ b/scan.c
@@ -1081,6 +1081,7 @@ static void print_ht_op(const uint8_t ty
@@ -1147,6 +1147,7 @@ static void print_ht_op(const uint8_t ty
printf("\t\t * secondary channel offset: %s\n",
ht_secondary_offset[data[1] & 0x3]);
printf("\t\t * STA channel width: %s\n", sta_chan_width[(data[1] & 0x4)>>2]);
@ -155,7 +155,7 @@
printf("\t\t * RIFS: %d\n", (data[1] & 0x8)>>3);
printf("\t\t * HT protection: %s\n", protection[data[2] & 0x3]);
printf("\t\t * non-GF present: %d\n", (data[2] & 0x4) >> 2);
@@ -1312,6 +1313,13 @@ static void print_ie(const struct ie_pri
@@ -1380,6 +1381,13 @@ static void print_ie(const struct ie_pri
static const struct ie_print ieprinters[] = {
[0] = { "SSID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
@ -169,7 +169,7 @@
[1] = { "Supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), },
[3] = { "DS Parameter set", print_ds, 1, 1, BIT(PRINT_SCAN), },
[5] = { "TIM", print_tim, 4, 255, BIT(PRINT_SCAN), },
@@ -1321,14 +1329,8 @@ static const struct ie_print ieprinters[
@@ -1389,14 +1397,8 @@ static const struct ie_print ieprinters[
[32] = { "Power constraint", print_powerconstraint, 1, 1, BIT(PRINT_SCAN), },
[35] = { "TPC report", print_tpcreport, 2, 2, BIT(PRINT_SCAN), },
[42] = { "ERP", print_erp, 1, 255, BIT(PRINT_SCAN), },
@ -184,7 +184,7 @@
[50] = { "Extended supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), },
[113] = { "MESH Configuration", print_mesh_conf, 7, 7, BIT(PRINT_SCAN), },
[114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
@@ -1336,6 +1338,7 @@ static const struct ie_print ieprinters[
@@ -1404,6 +1406,7 @@ static const struct ie_print ieprinters[
[107] = { "802.11u Interworking", print_interworking, 0, 255, BIT(PRINT_SCAN), },
[108] = { "802.11u Advertisement", print_11u_advert, 0, 255, BIT(PRINT_SCAN), },
[111] = { "802.11u Roaming Consortium", print_11u_rcon, 0, 255, BIT(PRINT_SCAN), },
@ -192,7 +192,7 @@
};
static void print_wifi_wpa(const uint8_t type, uint8_t len, const uint8_t *data)
@@ -1767,6 +1770,7 @@ void print_ies(unsigned char *ie, int ie
@@ -1835,6 +1838,7 @@ void print_ies(unsigned char *ie, int ie
ieprinters[ie[0]].name &&
ieprinters[ie[0]].flags & BIT(ptype)) {
print_ie(&ieprinters[ie[0]], ie[0], ie[1], ie + 2);
@ -200,7 +200,7 @@
} else if (ie[0] == 221 /* vendor */) {
print_vendor(ie[1], ie + 2, unknown, ptype);
} else if (unknown) {
@@ -1776,6 +1780,7 @@ void print_ies(unsigned char *ie, int ie
@@ -1844,6 +1848,7 @@ void print_ies(unsigned char *ie, int ie
for (i=0; i<ie[1]; i++)
printf(" %.2x", ie[2+i]);
printf("\n");
@ -208,7 +208,7 @@
}
ielen -= ie[1] + 2;
ie += ie[1] + 2;
@@ -1816,6 +1821,7 @@ static void print_capa_non_dmg(__u16 cap
@@ -1884,6 +1889,7 @@ static void print_capa_non_dmg(__u16 cap
printf(" ESS");
if (capa & WLAN_CAPABILITY_IBSS)
printf(" IBSS");
@ -216,7 +216,7 @@
if (capa & WLAN_CAPABILITY_CF_POLLABLE)
printf(" CfPollable");
if (capa & WLAN_CAPABILITY_CF_POLL_REQUEST)
@@ -1844,6 +1850,7 @@ static void print_capa_non_dmg(__u16 cap
@@ -1912,6 +1918,7 @@ static void print_capa_non_dmg(__u16 cap
printf(" DelayedBACK");
if (capa & WLAN_CAPABILITY_IMM_BACK)
printf(" ImmediateBACK");
@ -224,7 +224,7 @@
}
static int print_bss_handler(struct nl_msg *msg, void *arg)
@@ -1922,8 +1929,10 @@ static int print_bss_handler(struct nl_m
@@ -1996,8 +2003,10 @@ static int print_bss_handler(struct nl_m
if (bss[NL80211_BSS_FREQUENCY]) {
int freq = nla_get_u32(bss[NL80211_BSS_FREQUENCY]);
printf("\tfreq: %d\n", freq);
@ -237,7 +237,7 @@
printf("\tbeacon interval: %d TUs\n",
--- a/util.c
+++ b/util.c
@@ -267,6 +267,7 @@ static const char *commands[NL80211_CMD_
@@ -268,6 +268,7 @@ static const char *commands[NL80211_CMD_
static char cmdbuf[100];
@ -245,7 +245,7 @@
const char *command_name(enum nl80211_commands cmd)
{
if (cmd <= NL80211_CMD_MAX && commands[cmd])
@@ -274,6 +275,7 @@ const char *command_name(enum nl80211_co
@@ -275,6 +276,7 @@ const char *command_name(enum nl80211_co
sprintf(cmdbuf, "Unknown command (%d)", cmd);
return cmdbuf;
}

4
package/network/utils/iw/patches/300-display_interface_TX_power.patch
View File

@ -14,8 +14,8 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
--- a/interface.c
+++ b/interface.c
@@ -368,6 +368,13 @@ static int print_iface_handler(struct nl
printf("\n");
@@ -374,6 +374,13 @@ static int print_iface_handler(struct nl
indent, txp / 100, txp % 100);
}
+ if (tb_msg[NL80211_ATTR_WIPHY_TX_POWER_LEVEL]) {

102
package/network/utils/iw/patches/301-ibss_add_VHT80.patch
View File

@ -1,102 +0,0 @@
From: "Janusz.Dziedzic@tieto.com" <Janusz.Dziedzic@tieto.com>
Date: Thu, 10 Sep 2015 12:04:13 +0200
Subject: ibss: add VHT80 support for IBSS
Add VHT80 support for IBSS.
eg. iw wlan0 ibss join 5180 80MHZ
iw wlan0 ibbs join 5220 80MHZ
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
[fix formatting]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
ibss.c | 49 +++++++++++++++++++++++++++++++++++++++++--------
1 file changed, 41 insertions(+), 8 deletions(-)
--- a/ibss.c
+++ b/ibss.c
@@ -16,6 +16,39 @@
SECTION(ibss);
+struct chanmode {
+ const char *name;
+ unsigned int width;
+ int freq1_diff;
+ int chantype; /* for older kernel */
+};
+
+static int get_cf1(const struct chanmode *chanmode, unsigned long freq)
+{
+ int cf1 = freq, j;
+ int vht80[] = { 5180, 5260, 5500, 5580, 5660, 5745 };
+
+ switch (chanmode->width) {
+ case NL80211_CHAN_WIDTH_80:
+ /* setup center_freq1 */
+ for (j = 0; j < ARRAY_SIZE(vht80); j++) {
+ if (freq >= vht80[j] && freq < vht80[j] + 80)
+ break;
+ }
+
+ if (j == ARRAY_SIZE(vht80))
+ break;
+
+ cf1 = vht80[j] + 30;
+ break;
+ default:
+ cf1 = freq + chanmode->freq1_diff;
+ break;
+ }
+
+ return cf1;
+}
+
static int join_ibss(struct nl80211_state *state,
struct nl_msg *msg,
int argc, char **argv,
@@ -30,12 +63,8 @@ static int join_ibss(struct nl80211_stat
int bintval;
int i;
unsigned long freq;
- static const struct {
- const char *name;
- unsigned int width;
- int freq1_diff;
- int chantype; /* for older kernel */
- } *chanmode_selected = NULL, chanmode[] = {
+ const struct chanmode *chanmode_selected = NULL;
+ static const struct chanmode chanmode[] = {
{ .name = "HT20",
.width = NL80211_CHAN_WIDTH_20,
.freq1_diff = 0,
@@ -60,6 +89,10 @@ static int join_ibss(struct nl80211_stat
.width = NL80211_CHAN_WIDTH_10,
.freq1_diff = 0,
.chantype = -1 },
+ { .name = "80MHZ",
+ .width = NL80211_CHAN_WIDTH_80,
+ .freq1_diff = 0,
+ .chantype = -1 },
};
if (argc < 2)
@@ -90,7 +123,7 @@ static int join_ibss(struct nl80211_stat
NLA_PUT_U32(msg, NL80211_ATTR_CHANNEL_WIDTH,
chanmode_selected->width);
NLA_PUT_U32(msg, NL80211_ATTR_CENTER_FREQ1,
- freq + chanmode_selected->freq1_diff);
+ get_cf1(chanmode_selected, freq));
if (chanmode_selected->chantype != -1)
NLA_PUT_U32(msg,
NL80211_ATTR_WIPHY_CHANNEL_TYPE,
@@ -192,7 +225,7 @@ COMMAND(ibss, leave, NULL,
NL80211_CMD_LEAVE_IBSS, 0, CIB_NETDEV, leave_ibss,
"Leave the current IBSS cell.");
COMMAND(ibss, join,
- "<SSID> <freq in MHz> [HT20|HT40+|HT40-|NOHT|5MHZ|10MHZ] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>]"
+ "<SSID> <freq in MHz> [HT20|HT40+|HT40-|NOHT|5MHZ|10MHZ|80MHZ] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>]"
" [basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] "
"[key d:0:abcde]",
NL80211_CMD_JOIN_IBSS, 0, CIB_NETDEV, join_ibss,

39
package/network/utils/iw/patches/302-ibss_use_MHz_instead_MHZ.patch
View File

@ -1,39 +0,0 @@
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 18 Sep 2015 11:11:38 +0200
Subject: ibss: use correct "MHz" instead of "MHZ"
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
ibss.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/ibss.c
+++ b/ibss.c
@@ -81,15 +81,15 @@ static int join_ibss(struct nl80211_stat
.width = NL80211_CHAN_WIDTH_20_NOHT,
.freq1_diff = 0,
.chantype = NL80211_CHAN_NO_HT },
- { .name = "5MHZ",
+ { .name = "5MHz",
.width = NL80211_CHAN_WIDTH_5,
.freq1_diff = 0,
.chantype = -1 },
- { .name = "10MHZ",
+ { .name = "10MHz",
.width = NL80211_CHAN_WIDTH_10,
.freq1_diff = 0,
.chantype = -1 },
- { .name = "80MHZ",
+ { .name = "80MHz",
.width = NL80211_CHAN_WIDTH_80,
.freq1_diff = 0,
.chantype = -1 },
@@ -225,7 +225,7 @@ COMMAND(ibss, leave, NULL,
NL80211_CMD_LEAVE_IBSS, 0, CIB_NETDEV, leave_ibss,
"Leave the current IBSS cell.");
COMMAND(ibss, join,
- "<SSID> <freq in MHz> [HT20|HT40+|HT40-|NOHT|5MHZ|10MHZ|80MHZ] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>]"
+ "<SSID> <freq in MHz> [HT20|HT40+|HT40-|NOHT|5MHz|10MHz|80MHz] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>]"
" [basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] "
"[key d:0:abcde]",
NL80211_CMD_JOIN_IBSS, 0, CIB_NETDEV, join_ibss,

162
package/network/utils/iw/patches/303-mesh_add_VHT80.patch
View File

@ -1,162 +0,0 @@
From: Sven Eckelmann <sven@open-mesh.com>
Date: Tue, 24 Nov 2015 17:55:22 +0100
Subject: iw: add VHT80 support for 802.11s
Support next to the non-HT/HT channel widths like HT20 or NOHT also VHT80
channels during the mesh join
iw dev mesh0 mesh join "meshnet" freq 5180 80MHz
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
---
ibss.c | 33 ---------------------------------
iw.h | 9 +++++++++
mesh.c | 16 ++++++++--------
util.c | 26 ++++++++++++++++++++++++++
4 files changed, 43 insertions(+), 41 deletions(-)
--- a/ibss.c
+++ b/ibss.c
@@ -16,39 +16,6 @@
SECTION(ibss);
-struct chanmode {
- const char *name;
- unsigned int width;
- int freq1_diff;
- int chantype; /* for older kernel */
-};
-
-static int get_cf1(const struct chanmode *chanmode, unsigned long freq)
-{
- int cf1 = freq, j;
- int vht80[] = { 5180, 5260, 5500, 5580, 5660, 5745 };
-
- switch (chanmode->width) {
- case NL80211_CHAN_WIDTH_80:
- /* setup center_freq1 */
- for (j = 0; j < ARRAY_SIZE(vht80); j++) {
- if (freq >= vht80[j] && freq < vht80[j] + 80)
- break;
- }
-
- if (j == ARRAY_SIZE(vht80))
- break;
-
- cf1 = vht80[j] + 30;
- break;
- default:
- cf1 = freq + chanmode->freq1_diff;
- break;
- }
-
- return cf1;
-}
-
static int join_ibss(struct nl80211_state *state,
struct nl_msg *msg,
int argc, char **argv,
--- a/iw.h
+++ b/iw.h
@@ -59,6 +59,13 @@ struct cmd {
const struct cmd *parent;
};
+struct chanmode {
+ const char *name;
+ unsigned int width;
+ int freq1_diff;
+ int chantype; /* for older kernel */
+};
+
#define ARRAY_SIZE(ar) (sizeof(ar)/sizeof(ar[0]))
#define DIV_ROUND_UP(x, y) (((x) + (y - 1)) / (y))
@@ -174,6 +181,8 @@ void print_ies(unsigned char *ie, int ie
void parse_bitrate(struct nlattr *bitrate_attr, char *buf, int buflen);
void iw_hexdump(const char *prefix, const __u8 *data, size_t len);
+int get_cf1(const struct chanmode *chanmode, unsigned long freq);
+
#define SCHED_SCAN_OPTIONS "interval <in_msecs> [delay <in_secs>] " \
"[freqs <freq>+] [matches [ssid <ssid>]+]] [active [ssid <ssid>]+|passive] [randomise[=<addr>/<mask>]]"
int parse_sched_scan(struct nl_msg *msg, int *argc, char ***argv);
--- a/mesh.c
+++ b/mesh.c
@@ -439,12 +439,8 @@ static int join_mesh(struct nl80211_stat
int bintval, dtim_period, i, n_rates = 0;
char *end, *value = NULL, *sptr = NULL;
unsigned long freq = 0;
- static const struct {
- const char *name;
- unsigned int width;
- int freq1_diff;
- int chantype; /* for older kernel */
- } *chanmode_selected = NULL, chanmode[] = {
+ const struct chanmode *chanmode_selected = NULL;
+ static const struct chanmode chanmode[] = {
{ .name = "HT20",
.width = NL80211_CHAN_WIDTH_20,
.freq1_diff = 0,
@@ -461,6 +457,10 @@ static int join_mesh(struct nl80211_stat
.width = NL80211_CHAN_WIDTH_20_NOHT,
.freq1_diff = 0,
.chantype = NL80211_CHAN_NO_HT },
+ { .name = "80MHz",
+ .width = NL80211_CHAN_WIDTH_80,
+ .freq1_diff = 0,
+ .chantype = -1 },
};
if (argc < 1)
@@ -497,7 +497,7 @@ static int join_mesh(struct nl80211_stat
NLA_PUT_U32(msg, NL80211_ATTR_CHANNEL_WIDTH,
chanmode_selected->width);
NLA_PUT_U32(msg, NL80211_ATTR_CENTER_FREQ1,
- freq + chanmode_selected->freq1_diff);
+ get_cf1(chanmode_selected, freq));
if (chanmode_selected->chantype != -1)
NLA_PUT_U32(msg,
NL80211_ATTR_WIPHY_CHANNEL_TYPE,
@@ -599,7 +599,7 @@ static int join_mesh(struct nl80211_stat
nla_put_failure:
return -ENOBUFS;
}
-COMMAND(mesh, join, "<mesh ID> [[freq <freq in MHz> <HT20|HT40+|HT40-|NOHT>]"
+COMMAND(mesh, join, "<mesh ID> [[freq <freq in MHz> <HT20|HT40+|HT40-|NOHT|80MHz>]"
" [basic-rates <rate in Mbps,rate2,...>]], [mcast-rate <rate in Mbps>]"
" [beacon-interval <time in TUs>] [dtim-period <value>]"
" [vendor_sync on|off] [<param>=<value>]*",
--- a/util.c
+++ b/util.c
@@ -728,3 +728,29 @@ void iw_hexdump(const char *prefix, cons
}
printf("\n\n");
}
+
+int get_cf1(const struct chanmode *chanmode, unsigned long freq)
+{
+ int cf1 = freq, j;
+ int vht80[] = { 5180, 5260, 5500, 5580, 5660, 5745 };
+
+ switch (chanmode->width) {
+ case NL80211_CHAN_WIDTH_80:
+ /* setup center_freq1 */
+ for (j = 0; j < ARRAY_SIZE(vht80); j++) {
+ if (freq >= vht80[j] && freq < vht80[j] + 80)
+ break;
+ }
+
+ if (j == ARRAY_SIZE(vht80))
+ break;
+
+ cf1 = vht80[j] + 30;
+ break;
+ default:
+ cf1 = freq + chanmode->freq1_diff;
+ break;
+ }
+
+ return cf1;
+}