kernel: use tab in front of ledtrig-netdev.o and refresh kernel

SVN-Revision: 24798
lede-17.01
Hauke Mehrtens 2010-12-22 17:18:11 +00:00
parent 3e668eb7b7
commit 72ca63488b
16 changed files with 20 additions and 20 deletions

View File

@ -18,4 +18,4 @@
obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
+obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o +obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o

View File

@ -18,4 +18,4 @@
obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
+obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o +obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o

View File

@ -18,4 +18,4 @@
obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
+obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o +obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o

View File

@ -1,6 +1,6 @@
--- a/drivers/leds/Kconfig --- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig
@@ -326,4 +326,11 @@ config LEDS_TRIGGER_NETDEV @@ -315,4 +315,11 @@ config LEDS_TRIGGER_NETDEV
This allows LEDs to be controlled by network device activity. This allows LEDs to be controlled by network device activity.
If unsure, say Y. If unsure, say Y.
@ -14,8 +14,8 @@
endif # NEW_LEDS endif # NEW_LEDS
--- a/drivers/leds/Makefile --- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile +++ b/drivers/leds/Makefile
@@ -44,3 +44,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt @@ -42,3 +42,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
+obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o +obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o

View File

@ -945,7 +945,7 @@
#include <linux/proc_fs.h> #include <linux/proc_fs.h>
#include <linux/seq_file.h> #include <linux/seq_file.h>
#include <linux/stat.h> #include <linux/stat.h>
@@ -1859,7 +1862,11 @@ int dev_hard_start_xmit(struct sk_buff * @@ -1860,7 +1863,11 @@ int dev_hard_start_xmit(struct sk_buff *
int rc = NETDEV_TX_OK; int rc = NETDEV_TX_OK;
if (likely(!skb->next)) { if (likely(!skb->next)) {
@ -958,7 +958,7 @@
dev_queue_xmit_nit(skb, dev); dev_queue_xmit_nit(skb, dev);
if (netif_needs_gso(dev, skb)) { if (netif_needs_gso(dev, skb)) {
@@ -1969,8 +1976,7 @@ static inline u16 dev_cap_txqueue(struct @@ -1970,8 +1977,7 @@ static inline u16 dev_cap_txqueue(struct
return queue_index; return queue_index;
} }
@ -968,7 +968,7 @@
{ {
int queue_index; int queue_index;
struct sock *sk = skb->sk; struct sock *sk = skb->sk;
@@ -1999,6 +2005,7 @@ static struct netdev_queue *dev_pick_tx( @@ -2000,6 +2006,7 @@ static struct netdev_queue *dev_pick_tx(
skb_set_queue_mapping(skb, queue_index); skb_set_queue_mapping(skb, queue_index);
return netdev_get_tx_queue(dev, queue_index); return netdev_get_tx_queue(dev, queue_index);
} }

View File

@ -20,7 +20,7 @@
#else #else
static inline int kobject_uevent(struct kobject *kobj, static inline int kobject_uevent(struct kobject *kobj,
enum kobject_action action) enum kobject_action action)
@@ -224,6 +230,16 @@ static inline int add_uevent_var(struct @@ -224,6 +230,16 @@ static inline int add_uevent_var(struct
static inline int kobject_action_type(const char *buf, size_t count, static inline int kobject_action_type(const char *buf, size_t count,
enum kobject_action *type) enum kobject_action *type)
{ return -EINVAL; } { return -EINVAL; }

View File

@ -18,4 +18,4 @@
obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
+obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o +obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o

View File

@ -17,5 +17,5 @@
@@ -48,3 +48,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt @@ -48,3 +48,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
+obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o +obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o

View File

@ -385,7 +385,7 @@
u32 pmucap; u32 pmucap;
if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
@@ -516,15 +516,12 @@ void ssb_pmu_init(struct ssb_chipcommon @@ -516,15 +516,12 @@ void ssb_pmu_init(struct ssb_chipcommon
ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
cc->pmu.rev, pmucap); cc->pmu.rev, pmucap);

View File

@ -1,6 +1,6 @@
--- a/net/ipv6/addrconf.c --- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c
@@ -2961,7 +2961,8 @@ static void addrconf_dad_completed(struc @@ -2963,7 +2963,8 @@ static void addrconf_dad_completed(struc
start sending router solicitations. start sending router solicitations.
*/ */

View File

@ -18,4 +18,4 @@
obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
+obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o +obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o

View File

@ -17,5 +17,5 @@
@@ -50,3 +50,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt @@ -50,3 +50,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
+obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o +obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o

View File

@ -18,7 +18,7 @@
obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
+obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o +obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
--- a/drivers/leds/ledtrig-netdev.c --- a/drivers/leds/ledtrig-netdev.c
+++ b/drivers/leds/ledtrig-netdev.c +++ b/drivers/leds/ledtrig-netdev.c
@@ -307,8 +307,9 @@ done: @@ -307,8 +307,9 @@ done:

View File

@ -17,5 +17,5 @@
@@ -51,3 +51,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt @@ -51,3 +51,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
+obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o +obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o

View File

@ -18,7 +18,7 @@
obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
+obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o +obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
--- a/drivers/leds/ledtrig-netdev.c --- a/drivers/leds/ledtrig-netdev.c
+++ b/drivers/leds/ledtrig-netdev.c +++ b/drivers/leds/ledtrig-netdev.c
@@ -307,8 +307,9 @@ done: @@ -307,8 +307,9 @@ done:

View File

@ -17,5 +17,5 @@
@@ -54,3 +54,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt @@ -54,3 +54,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
+obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o +obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o