mirror of https://github.com/hak5/openwrt.git
lantiq: add Allnet ALL0333CJ support
This patch adds support for the Allnet ADSL2+ Modem ALL0333CJ. Specifications: - SoC: Amazon-SE - RAM: 16MB - Storage: 4MB NOR FLash - LEDs: Power, Ethernet, DSL (Sync) - Buttons: 1x Reset Button (not currently supported, will be done) - 1x Ethernet-Port: 1x RJ45 10/100BaseTX - 1x WAN-Port: AnnexB & J, G.992.1(ADSL), G.992.3(ADSL2), G.992.5(ADSL2+) Installation: - can be done via telnet+tftp or serial console - default passwords: - via telnet (root:admin) - via webinterface http://172.16.1.254:8235/ (admin:coolwhite) Installation via telnet / tftp: host: # your own host must have an tftpd daemon, then do this: host: ifconfig eth0:172 172.16.1.1 up host: # telnet to allnet modem, root:admin host: telnet 172.16.1.254 modem: # kill this daemon, it spams your console modem: killall dsl_cpe_control modem: # change to some place in ram: modem: cd /ramdisk/tftp_upload modem: # load lede-lantiq-ase-ALL0333CJ-squashfs-sysupgrade.bin alias uImage modem: tftp -g -r uImage 172.16.1.1 modem: # load these extra tools from your tftpd via: modem: # source: https://github.com/mcmilk/uboot-utils/releases/download/0.1/mips32.tar.gz modem: tftp -g -r flashwrite 172.16.1.1 modem: tftp -g -r fw_setenv 172.16.1.1 modem: tftp -g -r fw.conf 172.16.1.1 modem: ln -s fw_setenv fw_printenv modem: chmod +x * modem: ./fw_setenv disable_recovery y modem: ./fw_setenv kernel_addr 0xb0010000 modem: ./flashwrite /dev/mtd/1 uImage 0 Installation via serial line at uboot: uboot: # erase everything exept bootloader uboot: protect on b0000000 +10000; protect on b03f0000 +10000 uboot: erase all uboot: # get new firmware via tftp: uboot: tftpboot 0x80100000 uImage; setenv kernel_addr 0xb0010000 uboot: # copy to flash: uboot: cp.b 0x80100000 $(kernel_addr) $(filesize) uboot: # disable proprietary image checking: uboot: setenv disable_recovery=y; saveenv uboot: # reboot with LEDE ;) uboot: reset Ethernet works as expected, DSL syncronization does not work properly currently, I am working on this issue. Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>openwrt-18.06
Tino Reichardt
Hauke Mehrtens
parent
743be70d5b
commit
712ebe95f8
|
|
@ -35,6 +35,9 @@ led_internet="$(lantiq_get_dt_led internet)"
|
|||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
ALL0333CJ)
|
||||
ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1"
|
||||
;;
|
||||
ARV4525PW)
|
||||
ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -26,6 +26,13 @@ ACMP252|GIGASX76X)
|
|||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
||||
;;
|
||||
|
||||
ALL0333CJ)
|
||||
annex="b"
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
|
||||
ARV4510PW)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,119 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include "amazonse.dtsi"
|
||||
|
||||
/ {
|
||||
model = "ALL0333CJ - Allnet ALL0333CJ DSL Modem";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyLTQ0,115200";
|
||||
|
||||
aliases {
|
||||
led-boot = &power;
|
||||
led-failsafe = &power;
|
||||
led-running = &power;
|
||||
|
||||
led-dsl = &dsl;
|
||||
led-internet = &online_green;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
reg = <0x0 0x1000000>;
|
||||
};
|
||||
|
||||
fpi@b0000000 {
|
||||
etop@E180000 {
|
||||
phy-mode = "mii";
|
||||
};
|
||||
};
|
||||
|
||||
fpi@10000000 {
|
||||
gpio: pinmux@E100B10 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&state_default>;
|
||||
|
||||
state_default: pinmux {
|
||||
asc {
|
||||
lantiq,groups = "asc";
|
||||
lantiq,function = "asc";
|
||||
};
|
||||
keys_in {
|
||||
lantiq,pins = "io0",/* "io25", */"io29";
|
||||
lantiq,pull = <2>;
|
||||
lantiq,open-drain = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
localbus@0 {
|
||||
nor-boot@0 {
|
||||
compatible = "lantiq,nor";
|
||||
bank-width = <2>;
|
||||
reg = <0 0x0 0x400000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "uboot";
|
||||
reg = <0x00000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@10000 {
|
||||
label = "firmware";
|
||||
reg = <0x10000 0x3ef200>;
|
||||
};
|
||||
|
||||
partition@3ff200 {
|
||||
label = "uboot_env";
|
||||
reg = <0x3ff200 0xc00>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3ffe00 {
|
||||
label = "dummy_bits";
|
||||
reg = <0x3ffe00 0x200>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
/* power led: red=off, green=on */
|
||||
power: power {
|
||||
label = "all0333cj:green:power";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
lan: lan {
|
||||
label = "all0333cj:green:lan";
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
dsl: dsl {
|
||||
label = "all0333cj:green:dsl";
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
online_green: online {
|
||||
label = "all0333cj:green:online";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
online_red {
|
||||
label = "all0333cj:red:online";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -108,6 +108,16 @@ endef
|
|||
|
||||
ifeq ($(SUBTARGET),ase)
|
||||
|
||||
define Device/ALL0333CJ
|
||||
IMAGE_SIZE := 3700k
|
||||
DEVICE_DTS := ALL0333CJ
|
||||
DEVICE_TITLE := Allnet ALL0333CJ
|
||||
DEVICE_PACKAGES := kmod-ltq-adsl-ase kmod-ltq-adsl-ase-mei \
|
||||
kmod-ltq-adsl-ase-fw-b kmod-ltq-atm-ase \
|
||||
ltq-adsl-app ppp-mod-pppoe
|
||||
endef
|
||||
TARGET_DEVICES += ALL0333CJ
|
||||
|
||||
define Device/DGN1000B
|
||||
IMAGE_SIZE := 6000k
|
||||
DEVICE_DTS := DGN1000B
|
||||
|
|
|
|||
Loading…
Reference in New Issue