madwifi: add some beacon setup/update related fixes (based on Bruno Randolf's patchset)

SVN-Revision: 12049
lede-17.01
Felix Fietkau 2008-07-31 18:59:25 +00:00
parent d6d5c715b9
commit 709eae54e4
5 changed files with 110 additions and 3 deletions

View File

@ -0,0 +1,22 @@
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -5476,6 +5476,9 @@
ath_beacon_dturbo_config(vap, intval &
~(HAL_BEACON_RESET_TSF | HAL_BEACON_ENA));
#endif
+ if ((nexttbtt & HAL_BEACON_PERIOD) - (ath_hal_gettsf32(ah) >> 10)
+ <= ath_hal_sw_beacon_response_time)
+ nexttbtt += intval;
sc->sc_nexttbtt = nexttbtt;
ath_hal_beaconinit(ah, nexttbtt, intval);
if (intval & HAL_BEACON_RESET_TSF) {
--- a/ath_hal/ah_os.c
+++ b/ath_hal/ah_os.c
@@ -71,6 +71,7 @@
int ath_hal_dma_beacon_response_time = 2; /* in TUs */
int ath_hal_sw_beacon_response_time = 10; /* in TUs */
int ath_hal_additional_swba_backoff = 0; /* in TUs */
+EXPORT_SYMBOL(ath_hal_sw_beacon_response_time);
struct ath_hal *
_ath_hal_attach(u_int16_t devid, HAL_SOFTC sc,

View File

@ -0,0 +1,59 @@
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -2785,6 +2785,44 @@
return 1;
}
+/* Fix up the ATIM window after TSF resync */
+static int
+ath_hw_check_atim(struct ath_softc *sc, int window)
+{
+#define AR5K_TIMER0_5210 0x802c /* Next beacon time register */
+#define AR5K_TIMER0_5211 0x8028
+#define AR5K_TIMER3_5210 0x8038 /* End of ATIM window time register */
+#define AR5K_TIMER3_5211 0x8034
+ struct ath_hal *ah = sc->sc_ah;
+ unsigned int nbtt, atim;
+ int dev = ar_device(sc->devid);
+
+ switch(dev) {
+ case 5210:
+ nbtt = OS_REG_READ(ah, AR5K_TIMER0_5210);
+ atim = OS_REG_READ(ah, AR5K_TIMER3_5210);
+ if (atim - nbtt != window) {
+ OS_REG_WRITE(ah, AR5K_TIMER3_5210, nbtt + window );
+ return atim - nbtt;
+ }
+ break;
+ case 5211:
+ case 5212:
+ nbtt = OS_REG_READ(ah, AR5K_TIMER0_5211);
+ atim = OS_REG_READ(ah, AR5K_TIMER3_5211);
+ if (atim - nbtt != window) {
+ OS_REG_WRITE(ah, AR5K_TIMER3_5211, nbtt + window );
+ return atim - nbtt;
+ }
+ break;
+ /* NB: 5416+ doesn't do ATIM in hw */
+ default:
+ break;
+ }
+ return 0;
+}
+
+
/*
* Reset the hardware w/o losing operational state. This is
* basically a more efficient way of doing ath_stop, ath_init,
@@ -6391,6 +6429,11 @@
DPRINTF(sc, ATH_DEBUG_BEACON,
"Updated beacon timers\n");
}
+ if ((sc->sc_opmode == IEEE80211_M_IBSS) &&
+ IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid) &&
+ ath_hw_check_atim(sc, 1)) {
+ DPRINTF(sc, ATH_DEBUG_ANY, "Fixed ATIM window after beacon recv\n");
+ }
/* NB: Fall Through */
case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
if (vap->iv_opmode == IEEE80211_M_IBSS &&

View File

@ -0,0 +1,26 @@
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -5495,6 +5495,8 @@
ath_hal_intrset(ah, sc->sc_imask);
ath_set_beacon_cal(sc, 0);
} else {
+ unsigned long flags;
+
ath_hal_intrset(ah, 0);
if (reset_tsf)
intval |= HAL_BEACON_RESET_TSF;
@@ -5514,11 +5516,14 @@
ath_beacon_dturbo_config(vap, intval &
~(HAL_BEACON_RESET_TSF | HAL_BEACON_ENA));
#endif
+ local_irq_save(flags);
if ((nexttbtt & HAL_BEACON_PERIOD) - (ath_hal_gettsf32(ah) >> 10)
<= ath_hal_sw_beacon_response_time)
nexttbtt += intval;
sc->sc_nexttbtt = nexttbtt;
ath_hal_beaconinit(ah, nexttbtt, intval);
+ local_irq_restore(flags);
+
if (intval & HAL_BEACON_RESET_TSF) {
sc->sc_last_tsf = 0;
}

View File

@ -1,6 +1,6 @@
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -6325,7 +6325,7 @@
@@ -6371,7 +6371,7 @@
/* Never copy the SKB, as it is ours on the RX side, and this is the
* last process on the TX side and we only modify our own headers. */
@ -9,7 +9,7 @@
if (tskb == NULL) {
DPRINTF(sc, ATH_DEBUG_ANY,
"Dropping; ath_skb_removepad failed!\n");
@@ -6333,6 +6333,8 @@
@@ -6379,6 +6379,8 @@
}
ieee80211_input_monitor(ic, tskb, bf, tx, tsf, sc);

View File

@ -10,7 +10,7 @@
Please let us know if you think your name should be mentioned here!
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -2964,7 +2964,7 @@
@@ -3002,7 +3002,7 @@
struct ath_softc *sc = dev->priv;
struct ath_hal *ah = sc->sc_ah;
struct ieee80211_phy_params *ph = (struct ieee80211_phy_params *)