ar71xx: add userspace support for WD My Net N750

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
[juhosg: remove the image generation part until the ethernet
         switch issue is resolved]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39078

target/linux/ar71xx/base-files/etc/diag.sh

@@ -80,7 +80,8 @@ get_status_led() {
 	mr600v2)
 		status_led="mr600:blue:power"
 		;;
-	mynet-n600)
+	mynet-n600 | \
+	mynet-n750)
 		status_led="wd:blue:power"
 		;;
 	mynet-rext)

target/linux/ar71xx/base-files/etc/uci-defaults/02_network

@@ -207,6 +207,16 @@ dir-825-c1)
 	[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
 	;;
 
+mynet-n750)
+	local mac
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
+	ucidef_add_switch_vlan "switch0" "2" "0t 5"
+	mac=$(mtd_get_mac_ascii devdata "wanmac")
+	[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
+	;;
+
 dir-835-a1 |\
 wndr4300)
 	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"

target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-seama-header

@@ -14,7 +14,8 @@ fix_seama_header() {
 board=$(ar71xx_board_name)
 
 case "$board" in
-mynet-n600)
+mynet-n600 | \
+mynet-n750)
 	fix_seama_header kernel
 	;;
 esac

target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -321,6 +321,9 @@ ar71xx_board_detect() {
 	*"My Net N600")
 		name="mynet-n600"
 		;;
+	*"My Net N750")
+		name="mynet-n750"
+		;;
 	*"WD My Net Wi-Fi Range Extender")
 		name="mynet-rext"
 		;;

target/linux/ar71xx/base-files/lib/upgrade/platform.sh

@@ -177,7 +177,8 @@ platform_check_image() {
 		return 1
 		;;
 
-	mynet-n600)
+	mynet-n600 | \
+	mynet-n750)
 		[ "$magic_long" != "5ea3a417" ] && {
 			echo "Invalid image, bad magic: $magic_long"
 			return 1