mirror of https://github.com/hak5/openwrt.git
Lars-Peter Clausen
parent
3b6d2366bd
commit
6e3060af50
|
|
@ -11,7 +11,7 @@ BOARD:=kirkwood
|
|||
BOARDNAME:=Marvell Kirkwood
|
||||
FEATURES:=targz usb
|
||||
|
||||
LINUX_VERSION:=2.6.30.10
|
||||
LINUX_VERSION:=2.6.35.3
|
||||
|
||||
include $(INCLUDE_DIR)/target.mk
|
||||
|
||||
|
|
|
|||
|
|
@ -1,23 +1,29 @@
|
|||
# CONFIG_AEABI is not set
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
# CONFIG_ARCH_CNS3XXX is not set
|
||||
CONFIG_ARCH_KIRKWOOD=y
|
||||
# CONFIG_ARCH_NUC93X is not set
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
# CONFIG_ARCH_S5P6440 is not set
|
||||
# CONFIG_ARCH_S5P6442 is not set
|
||||
# CONFIG_ARCH_S5PC100 is not set
|
||||
# CONFIG_ARCH_S5PV210 is not set
|
||||
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
|
||||
# CONFIG_ARCH_SHMOBILE is not set
|
||||
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
|
||||
# CONFIG_ARCH_VEXPRESS is not set
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARM_L1_CACHE_SHIFT=5
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
# CONFIG_ARPD is not set
|
||||
CONFIG_ATA=m
|
||||
# CONFIG_BINARY_PRINTF is not set
|
||||
CONFIG_BITREVERSE=y
|
||||
CONFIG_CACHE_FEROCEON_L2=y
|
||||
# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
|
||||
CONFIG_CMDLINE="rootdelay=1 root=/dev/mmcblk0p1 noinitrd console=ttyS0,115200"
|
||||
CONFIG_CPU_32=y
|
||||
CONFIG_CPU_32v5=y
|
||||
CONFIG_CPU_ABRT_EV5T=y
|
||||
CONFIG_CPU_CACHE_VIVT=y
|
||||
|
|
@ -29,7 +35,7 @@ CONFIG_CPU_FEROCEON=y
|
|||
# CONFIG_CPU_ICACHE_DISABLE is not set
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_CPU_IDLE_GOV_LADDER=y
|
||||
CONFIG_CPU_PABRT_NOIFAR=y
|
||||
CONFIG_CPU_PABRT_LEGACY=y
|
||||
CONFIG_CPU_TLB_FEROCEON=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
# CONFIG_DEBUG_USER is not set
|
||||
|
|
@ -46,11 +52,13 @@ CONFIG_EXT3_FS=y
|
|||
# CONFIG_FPE_FASTFPE is not set
|
||||
# CONFIG_FPE_NWFPE is not set
|
||||
CONFIG_FRAME_POINTER=y
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
||||
CONFIG_GPIOLIB=y
|
||||
# CONFIG_HAMRADIO is not set
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
|
|
@ -61,11 +69,15 @@ CONFIG_HAVE_ARCH_KGDB=y
|
|||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_KERNEL_GZIP=y
|
||||
CONFIG_HAVE_KERNEL_LZMA=y
|
||||
CONFIG_HAVE_KERNEL_LZO=y
|
||||
CONFIG_HAVE_KPROBES=y
|
||||
CONFIG_HAVE_KRETPROBES=y
|
||||
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
|
||||
CONFIG_HAVE_MLOCK=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HAVE_PROC_CPU=y
|
||||
CONFIG_HDLC=m
|
||||
CONFIG_HDLC_CISCO=m
|
||||
CONFIG_HDLC_FR=m
|
||||
|
|
@ -83,28 +95,40 @@ CONFIG_INITRAMFS_SOURCE=""
|
|||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_PIMSM_V1=y
|
||||
CONFIG_IP_PIMSM_V2=y
|
||||
# CONFIG_ISDN_CAPI is not set
|
||||
# CONFIG_ISDN_I4L is not set
|
||||
CONFIG_JBD=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
# CONFIG_MACH_DB88F6281_BP is not set
|
||||
CONFIG_MACH_DOCKSTAR=y
|
||||
# CONFIG_MACH_ESATA_SHEEVAPLUG is not set
|
||||
# CONFIG_MACH_GURUPLUG is not set
|
||||
# CONFIG_MACH_INETSPACE_V2 is not set
|
||||
# CONFIG_MACH_MV88F6281GTW_GE is not set
|
||||
# CONFIG_MACH_NET2BIG_V2 is not set
|
||||
# CONFIG_MACH_NET5BIG_V2 is not set
|
||||
# CONFIG_MACH_NETSPACE_V2 is not set
|
||||
# CONFIG_MACH_OPENRD_BASE is not set
|
||||
# CONFIG_MACH_OPENRD_CLIENT is not set
|
||||
# CONFIG_MACH_RD88F6192_NAS is not set
|
||||
# CONFIG_MACH_RD88F6281 is not set
|
||||
CONFIG_MACH_SHEEVAPLUG=y
|
||||
# CONFIG_MACH_TS219 is not set
|
||||
# CONFIG_MACH_TS41X is not set
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK=y
|
||||
CONFIG_MMC_MVSDIO=y
|
||||
# CONFIG_MMC_TIFM_SD is not set
|
||||
# CONFIG_MTD_CFI is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_ORION=y
|
||||
# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
|
||||
# CONFIG_MTD_ROOTFS_SPLIT is not set
|
||||
# CONFIG_MTD_SM_COMMON is not set
|
||||
CONFIG_MV643XX_ETH=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NET_DSA=y
|
||||
# CONFIG_NET_DSA_MV88E6060 is not set
|
||||
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
|
||||
|
|
@ -114,25 +138,26 @@ CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
|
|||
CONFIG_NET_DSA_TAG_DSA=y
|
||||
# CONFIG_NET_DSA_TAG_EDSA is not set
|
||||
# CONFIG_NET_DSA_TAG_TRAILER is not set
|
||||
# CONFIG_NO_IOPORT is not set
|
||||
CONFIG_NLS=m
|
||||
CONFIG_OUTER_CACHE=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PAGE_OFFSET=0xC0000000
|
||||
CONFIG_PATA_ARTOP=m
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PLAT_ORION=y
|
||||
# CONFIG_PLAT_SPEAR is not set
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_MV=y
|
||||
CONFIG_SATA_PMP=y
|
||||
CONFIG_SCSI=m
|
||||
CONFIG_SCSI_MOD=m
|
||||
# CONFIG_SCSI_MULTI_LUN is not set
|
||||
# CONFIG_SDIO_UART is not set
|
||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
||||
# CONFIG_SLOW_WORK is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4096
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=999999
|
||||
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||
CONFIG_TRACING_SUPPORT=y
|
||||
CONFIG_UID16=y
|
||||
CONFIG_USB=m
|
||||
CONFIG_USB_EHCI_HCD=m
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
|
||||
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
|
||||
@@ -34,7 +34,7 @@ static struct mtd_partition sheevaplug_n
|
||||
@@ -33,7 +33,7 @@ static struct mtd_partition sheevaplug_n
|
||||
.offset = MTDPART_OFS_NXTBLK,
|
||||
.size = SZ_4M
|
||||
}, {
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
--- a/drivers/mmc/core/sd.c
|
||||
+++ b/drivers/mmc/core/sd.c
|
||||
@@ -263,6 +263,15 @@ static int mmc_switch_hs(struct mmc_card
|
||||
@@ -264,6 +264,15 @@ static int mmc_switch_hs(struct mmc_card
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
|
|
@ -18,7 +18,7 @@
|
|||
goto out;
|
||||
--- a/drivers/mmc/core/core.c
|
||||
+++ b/drivers/mmc/core/core.c
|
||||
@@ -286,9 +286,9 @@ void mmc_set_data_timeout(struct mmc_dat
|
||||
@@ -302,9 +302,9 @@ void mmc_set_data_timeout(struct mmc_dat
|
||||
* The limit is really 250 ms, but that is
|
||||
* insufficient for some crappy cards.
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -1,132 +0,0 @@
|
|||
From: Rabeeh Khoury <rabeeh@marvell.com>
|
||||
Date: Sun, 22 Mar 2009 15:30:32 +0000 (+0200)
|
||||
Subject: [ARM] Kirkwood: peripherals clock gating for power management
|
||||
X-Git-Url: http://git.marvell.com/?p=orion.git;a=commitdiff_plain;h=c0c3df02efed0e5dea9aa4d8313e06e1f68f2cb4;hp=039b97666e1335eac517c7d35a0fa1143af689f0
|
||||
|
||||
[ARM] Kirkwood: peripherals clock gating for power management
|
||||
|
||||
1. Enabling clock gating of unused peripherals
|
||||
2. PLL and PHY of the units are also disabled (when possible.
|
||||
|
||||
Signed-off-by: Rabeeh Khoury <rabeeh@marvell.com>
|
||||
|
||||
[ This needs to be revisited to make power handling dynamic and per device. -- Nico ]
|
||||
|
||||
---
|
||||
|
||||
--- a/arch/arm/mach-kirkwood/common.c
|
||||
+++ b/arch/arm/mach-kirkwood/common.c
|
||||
@@ -786,6 +786,38 @@ static void __init kirkwood_l2_init(void
|
||||
#endif
|
||||
}
|
||||
|
||||
+void __init kirkwood_clock_gate(u32 reg)
|
||||
+{
|
||||
+ printk(KERN_INFO "Kirkwood: Gating clock using mask 0x%x\n", reg);
|
||||
+ /* First make sure that the units are accessible */
|
||||
+ writel(readl(CLOCK_GATING_CTRL) | reg, CLOCK_GATING_CTRL);
|
||||
+ /* For SATA first shutdown the phy */
|
||||
+ if (reg & CGC_SATA0) {
|
||||
+ /* Disable PLL and IVREF */
|
||||
+ writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
|
||||
+ /* Disable PHY */
|
||||
+ writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
|
||||
+ }
|
||||
+ if (reg & CGC_SATA1) {
|
||||
+ /* Disable PLL and IVREF */
|
||||
+ writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
|
||||
+ /* Disable PHY */
|
||||
+ writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
|
||||
+ }
|
||||
+ /* For PCI-E first shutdown the phy */
|
||||
+ if (reg & CGC_PEX0) {
|
||||
+ writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
|
||||
+ while (1) {
|
||||
+ if (readl(PCIE_STATUS) & 0x1)
|
||||
+ break;
|
||||
+ }
|
||||
+ writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
|
||||
+ }
|
||||
+ /* Now gate clock the required units */
|
||||
+ writel(readl(CLOCK_GATING_CTRL) & ~reg, CLOCK_GATING_CTRL);
|
||||
+ return;
|
||||
+}
|
||||
+
|
||||
void __init kirkwood_init(void)
|
||||
{
|
||||
printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
|
||||
--- a/arch/arm/mach-kirkwood/common.h
|
||||
+++ b/arch/arm/mach-kirkwood/common.h
|
||||
@@ -22,6 +22,7 @@ struct mvsdio_platform_data;
|
||||
void kirkwood_map_io(void);
|
||||
void kirkwood_init(void);
|
||||
void kirkwood_init_irq(void);
|
||||
+void __init kirkwood_clock_gate(u32 reg);
|
||||
|
||||
extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
|
||||
void kirkwood_setup_cpu_mbus(void);
|
||||
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
|
||||
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
|
||||
@@ -39,4 +39,20 @@
|
||||
#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
|
||||
#define L2_WRITETHROUGH 0x00000010
|
||||
|
||||
+#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE | 0x11c)
|
||||
+#define CGC_GE0 0x1
|
||||
+#define CGC_PEX0 0x4
|
||||
+#define CGC_USB0 0x8
|
||||
+#define CGC_SDIO 0x10
|
||||
+#define CGC_TSU 0x20
|
||||
+#define CGC_NAND_SPI 0x80
|
||||
+#define CGC_XOR0 0x100
|
||||
+#define CGC_AUDIO 0x200
|
||||
+#define CGC_SATA0 0x4000
|
||||
+#define CGC_SATA1 0x8000
|
||||
+#define CGC_XOR1 0x10000
|
||||
+#define CGC_CRYPTO 0x20000
|
||||
+#define CGC_GE1 0x80000
|
||||
+#define CGC_TDM 0x100000
|
||||
+
|
||||
#endif
|
||||
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
|
||||
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
|
||||
@@ -64,6 +64,8 @@
|
||||
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
|
||||
|
||||
#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
|
||||
+#define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70)
|
||||
+#define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04)
|
||||
|
||||
#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
|
||||
|
||||
@@ -80,6 +82,11 @@
|
||||
#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
|
||||
|
||||
#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
|
||||
+#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x80000)
|
||||
+#define SATA0_IF_CTRL (SATA_VIRT_BASE | 0x2050)
|
||||
+#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE | 0x2330)
|
||||
+#define SATA1_IF_CTRL (SATA_VIRT_BASE | 0x4050)
|
||||
+#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE | 0x4330)
|
||||
|
||||
#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000)
|
||||
|
||||
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
|
||||
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
|
||||
@@ -19,6 +19,7 @@
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <mach/kirkwood.h>
|
||||
+#include <mach/bridge-regs.h>
|
||||
#include <plat/mvsdio.h>
|
||||
#include <plat/orion_nand.h>
|
||||
#include "common.h"
|
||||
@@ -122,6 +123,8 @@ static void __init sheevaplug_init(void)
|
||||
|
||||
platform_device_register(&sheevaplug_nand_flash);
|
||||
platform_device_register(&sheevaplug_leds);
|
||||
+ kirkwood_clock_gate(CGC_PEX0 | CGC_TSU | CGC_AUDIO | CGC_SATA0 |\
|
||||
+ CGC_SATA1 | CGC_CRYPTO | CGC_GE1 | CGC_TDM);
|
||||
}
|
||||
|
||||
MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
|
||||
|
|
@ -1,146 +0,0 @@
|
|||
From: Rabeeh Khoury <rabeeh@marvell.com>
|
||||
Date: Tue, 24 Mar 2009 14:10:15 +0000 (+0200)
|
||||
Subject: [ARM] Kirkwood: CPU idle driver
|
||||
X-Git-Url: http://git.marvell.com/?p=orion.git;a=commitdiff_plain;h=039b97666e1335eac517c7d35a0fa1143af689f0;hp=56a50adda49b2020156616c4eb15353e0f9ad7de
|
||||
|
||||
[ARM] Kirkwood: CPU idle driver
|
||||
|
||||
The patch adds support for Kirkwood cpu idle.
|
||||
Two idle states are defined:
|
||||
1. Wait-for-interrupt (replacing default kirkwood wfi)
|
||||
2. Wait-for-interrupt and DDR self refresh
|
||||
|
||||
Signed-off-by: Rabeeh Khoury <rabeeh@marvell.com>
|
||||
Signed-off-by: Nicolas Pitre <nico@marvell.com>
|
||||
---
|
||||
|
||||
--- a/arch/arm/configs/kirkwood_defconfig
|
||||
+++ b/arch/arm/configs/kirkwood_defconfig
|
||||
@@ -270,7 +270,9 @@ CONFIG_CMDLINE=""
|
||||
#
|
||||
# CPU Power Management
|
||||
#
|
||||
-# CONFIG_CPU_IDLE is not set
|
||||
+CONFIG_CPU_IDLE=y
|
||||
+CONFIG_CPU_IDLE_GOV_LADDER=y
|
||||
+CONFIG_CPU_IDLE_GOV_MENU=y
|
||||
|
||||
#
|
||||
# Floating point emulation
|
||||
--- a/arch/arm/mach-kirkwood/Makefile
|
||||
+++ b/arch/arm/mach-kirkwood/Makefile
|
||||
@@ -5,3 +5,5 @@ obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88
|
||||
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
|
||||
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
|
||||
obj-$(CONFIG_MACH_TS219) += ts219-setup.o
|
||||
+
|
||||
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/mach-kirkwood/cpuidle.c
|
||||
@@ -0,0 +1,96 @@
|
||||
+/*
|
||||
+ * arch/arm/mach-kirkwood/cpuidle.c
|
||||
+ *
|
||||
+ * CPU idle Marvell Kirkwood SoCs
|
||||
+ *
|
||||
+ * This file is licensed under the terms of the GNU General Public
|
||||
+ * License version 2. This program is licensed "as is" without any
|
||||
+ * warranty of any kind, whether express or implied.
|
||||
+ *
|
||||
+ * The cpu idle uses wait-for-interrupt and DDR self refresh in order
|
||||
+ * to implement two idle states -
|
||||
+ * #1 wait-for-interrupt
|
||||
+ * #2 wait-for-interrupt and DDR self refresh
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/cpuidle.h>
|
||||
+#include <asm/io.h>
|
||||
+#include <asm/proc-fns.h>
|
||||
+#include <mach/kirkwood.h>
|
||||
+
|
||||
+#define KIRKWOOD_MAX_STATES 2
|
||||
+
|
||||
+static struct cpuidle_driver kirkwood_idle_driver = {
|
||||
+ .name = "kirkwood_idle",
|
||||
+ .owner = THIS_MODULE,
|
||||
+};
|
||||
+
|
||||
+static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
|
||||
+
|
||||
+/* Actual code that puts the SoC in different idle states */
|
||||
+static int kirkwood_enter_idle(struct cpuidle_device *dev,
|
||||
+ struct cpuidle_state *state)
|
||||
+{
|
||||
+ struct timeval before, after;
|
||||
+ int idle_time;
|
||||
+
|
||||
+ local_irq_disable();
|
||||
+ do_gettimeofday(&before);
|
||||
+ if (state == &dev->states[0])
|
||||
+ /* Wait for interrupt state */
|
||||
+ cpu_do_idle();
|
||||
+ else if (state == &dev->states[1]) {
|
||||
+ /*
|
||||
+ * Following write will put DDR in self refresh.
|
||||
+ * Note that we have 256 cycles before DDR puts it
|
||||
+ * self in self-refresh, so the wait-for-interrupt
|
||||
+ * call afterwards won't get the DDR from self refresh
|
||||
+ * mode.
|
||||
+ */
|
||||
+ writel(0x7, DDR_OPERATION_BASE);
|
||||
+ cpu_do_idle();
|
||||
+ }
|
||||
+ do_gettimeofday(&after);
|
||||
+ local_irq_enable();
|
||||
+ idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
|
||||
+ (after.tv_usec - before.tv_usec);
|
||||
+ return idle_time;
|
||||
+}
|
||||
+
|
||||
+/* Initialize CPU idle by registering the idle states */
|
||||
+static int kirkwood_init_cpuidle(void)
|
||||
+{
|
||||
+ struct cpuidle_device *device;
|
||||
+
|
||||
+ cpuidle_register_driver(&kirkwood_idle_driver);
|
||||
+
|
||||
+ device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
|
||||
+ device->state_count = KIRKWOOD_MAX_STATES;
|
||||
+
|
||||
+ /* Wait for interrupt state */
|
||||
+ device->states[0].enter = kirkwood_enter_idle;
|
||||
+ device->states[0].exit_latency = 1;
|
||||
+ device->states[0].target_residency = 10000;
|
||||
+ device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
|
||||
+ strcpy(device->states[0].name, "WFI");
|
||||
+ strcpy(device->states[0].desc, "Wait for interrupt");
|
||||
+
|
||||
+ /* Wait for interrupt and DDR self refresh state */
|
||||
+ device->states[1].enter = kirkwood_enter_idle;
|
||||
+ device->states[1].exit_latency = 10;
|
||||
+ device->states[1].target_residency = 10000;
|
||||
+ device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
|
||||
+ strcpy(device->states[1].name, "DDR SR");
|
||||
+ strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
|
||||
+
|
||||
+ if (cpuidle_register_device(device)) {
|
||||
+ printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
|
||||
+ return -EIO;
|
||||
+ }
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+device_initcall(kirkwood_init_cpuidle);
|
||||
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
|
||||
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
|
||||
@@ -48,6 +48,7 @@
|
||||
*/
|
||||
#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
|
||||
#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500)
|
||||
+#define DDR_OPERATION_BASE (DDR_VIRT_BASE | 0x1418)
|
||||
|
||||
#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
|
||||
#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
|
||||
|
|
@ -11,13 +11,11 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx>
|
|||
4 files changed, 120 insertions(+), 0 deletions(-)
|
||||
create mode 100644 arch/arm/mach-kirkwood/dockstar-setup.c
|
||||
|
||||
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
|
||||
index 29b2163..74d832f 100644
|
||||
--- a/arch/arm/mach-kirkwood/Kconfig
|
||||
+++ b/arch/arm/mach-kirkwood/Kconfig
|
||||
@@ -32,6 +32,12 @@ config MACH_TS219
|
||||
@@ -99,6 +99,12 @@ config MACH_NET5BIG_V2
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
QNAP TS-119 and TS-219 Turbo NAS devices.
|
||||
LaCie 5Big Network v2 NAS.
|
||||
|
||||
+config MACH_DOCKSTAR
|
||||
+ bool "Seagate FreeAgent DockStar"
|
||||
|
|
@ -28,19 +26,16 @@ index 29b2163..74d832f 100644
|
|||
endmenu
|
||||
|
||||
endif
|
||||
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
|
||||
index c0cd5d3..025b256 100644
|
||||
--- a/arch/arm/mach-kirkwood/Makefile
|
||||
+++ b/arch/arm/mach-kirkwood/Makefile
|
||||
@@ -6,4 +6,5 @@ obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
|
||||
@@ -5,6 +5,7 @@ obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88
|
||||
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
|
||||
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
|
||||
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
|
||||
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
|
||||
+obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
|
||||
|
||||
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
|
||||
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
|
||||
new file mode 100644
|
||||
index 0000000..a90475d
|
||||
obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
|
||||
obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
|
||||
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
|
||||
@@ -0,0 +1,148 @@
|
||||
|
|
@ -192,15 +187,3 @@ index 0000000..a90475d
|
|||
+ .init_irq = kirkwood_init_irq,
|
||||
+ .timer = &kirkwood_timer,
|
||||
+MACHINE_END
|
||||
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
|
||||
index 48cbdcb..8d56837 100644
|
||||
--- a/arch/arm/tools/mach-types
|
||||
+++ b/arch/arm/tools/mach-types
|
||||
@@ -2245,3 +2245,4 @@ davinci_dm365_dvr MACH_DAVINCI_DM365_DVR DAVINCI_DM365_DVR 2963
|
||||
omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258
|
||||
simcom MACH_SIMCOM SIMCOM 2259
|
||||
mcwebio MACH_MCWEBIO MCWEBIO 2260
|
||||
+dockstar MACH_DOCKSTAR DOCKSTAR 2998
|
||||
--
|
||||
1.7.1
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue