hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

apm821xx: MR24: fix ethernet phy detection on the MR24 

To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
This patch fixes a problem where the AR8035 PHY can't be
detected on the Cisco Meraki MR24, when the ethernet cable
is not connected during boot.

Russell Senior reported:
|This appears to be a problem during probing of the AR8035
|phy chip. When ethernet has no link, the phy detection fails,
|and eth0 is not created. Plugging ethernet later has no effect,
|because there is no interface as far as the kernel is
|concerned. The relevant part of the boot log looks like this:
|
|[    0.876611] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
|[    0.882532] /plb/opb/ethernet@ef600c00: reset timeout
|[    0.888546] /plb/opb/ethernet@ef600c00: can't find PHY!
(<https://bugs.lede-project.org/index.php?do=details&task_id=687>)

Fixes FS#687
Cc: Chris Blake <chrisrblake93@gmail.com>
Reported-by: Russell Senior <russell@personaltelco.net>
Fixes: 23fbb5a87c56e98 ("emac: Fix EMAC soft reset on 460EX/GT")
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
openwrt-18.06
Christian Lamparter 2017-06-07 23:32:26 +00:00 committed by Mathias Kresin
parent 4482063c34
commit 6adc757097
3 changed files with 116 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
target/linux/apm821xx/patches-4.9/701-powerpc_ibm_apm82181_phyclk_fix.patch
View File

@ -30,15 +30,14 @@
#endif
}
@@ -2617,7 +2626,7 @@ static int emac_init_config(struct emac_
@@ -2617,6 +2626,7 @@ static int emac_init_config(struct emac_
if (of_device_is_compatible(np, "ibm,emac-apm821xx")) {
dev->features |= (EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE |
EMAC_FTR_APM821XX_NO_HALF_DUPLEX |
- EMAC_FTR_460EX_PHY_CLK_FIX);
+ EMAC_FTR_APM821XX_PHY_CLK_FIX);
+ EMAC_FTR_APM821XX_PHY_CLK_FIX |
EMAC_FTR_460EX_PHY_CLK_FIX);
}
} else if (of_device_is_compatible(np, "ibm,emac4")) {
dev->features |= EMAC_FTR_EMAC4;
--- a/drivers/net/ethernet/ibm/emac/core.h
+++ b/drivers/net/ethernet/ibm/emac/core.h
@@ -333,6 +333,8 @@ struct emac_instance {

2
target/linux/apm821xx/patches-4.9/702-powerpc_ibm_phy_add_dt_parser.patch
View File

@ -300,7 +300,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
/* Init PHY */
if (dev->phy.def->ops->init)
dev->phy.def->ops->init(&dev->phy);
@@ -2987,6 +3228,12 @@ static int emac_remove(struct platform_d
@@ -2988,6 +3229,12 @@ static int emac_remove(struct platform_d
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
zmii_detach(dev->zmii_dev, dev->zmii_port);

112
target/linux/apm821xx/patches-4.9/703-net-emac-fix-reset-timeout-with-AR8035-phy.patch Normal file
View File

@ -0,0 +1,112 @@
From b2e79053e7456a961249c8865214a1e95b49c863 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sat, 3 Jun 2017 18:16:19 +0200
Subject: [PATCH] net: emac: fix reset timeout with AR8035 phy
This patch fixes a problem where the AR8035 PHY can't be
detected on an Cisco Meraki MR24, if the ethernet cable is
not connected on boot.
Russell Senior provided steps to reproduce the issue:
|Disconnect ethernet cable, apply power, wait until device has booted,
|plug in ethernet, check for interfaces, no eth0 is listed.
|
|This appears to be a problem during probing of the AR8035 Phy chip.
|When ethernet has no link, the phy detection fails, and eth0 is not
|created. Plugging ethernet later has no effect, because there is no
|interface as far as the kernel is concerned. The relevant part of
|the boot log looks like this:
|this is the failing case:
|
|[ 0.876611] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
|[ 0.882532] /plb/opb/ethernet@ef600c00: reset timeout
|[ 0.888546] /plb/opb/ethernet@ef600c00: can't find PHY!
|and the succeeding case:
|
|[ 0.876672] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
|[ 0.883952] eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 00:01:..
|[ 0.890822] eth0: found Atheros 8035 Gigabit Ethernet PHY (0x01)
Based on the comment and the commit message of
commit 23fbb5a87c56 ("emac: Fix EMAC soft reset on 460EX/GT").
This is because the AR8035 PHY doesn't provide the TX Clock,
if the ethernet cable is not attached. This causes the reset
to timeout and the PHY detection code in emac_init_phy() is
unable to detect the AR8035 PHY. As a result, the emac driver
bails out early and the user left with no ethernet.
In order to stay compatible with existing configurations, the driver
tries the current reset approach at first. Only if the first attempt
timed out, it does perform one more retry with the clock input
temporarily switched to the internal clock source for just the
duration of the reset.
LEDE-Bug: #687 <https://bugs.lede-project.org/index.php?do=details&task_id=687>
Cc: Chris Blake <chrisrblake93@gmail.com>
Reported-by: Russell Senior <russell@personaltelco.net>
Fixes: 23fbb5a87c56e98 ("emac: Fix EMAC soft reset on 460EX/GT")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
---
drivers/net/ethernet/ibm/emac/core.c | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -352,6 +352,7 @@ static int emac_reset(struct emac_instan
{
struct emac_regs __iomem *p = dev->emacp;
int n = 20;
+ bool __maybe_unused try_internal_clock = false;
DBG(dev, "reset" NL);
@@ -364,6 +365,7 @@ static int emac_reset(struct emac_instan
}
#ifdef CONFIG_PPC_DCR_NATIVE
+do_retry:
/*
* PPC460EX/GT Embedded Processor Advanced User's Manual
* section 28.10.1 Mode Register 0 (EMACx_MR0) states:
@@ -371,10 +373,19 @@ static int emac_reset(struct emac_instan
* of the EMAC. If none is present, select the internal clock
* (SDR0_ETH_CFG[EMACx_PHY_CLK] = 1).
* After a soft reset, select the external clock.
+ *
+ * The AR8035-A PHY Meraki MR24 does not provide a TX Clk if the
+ * ethernet cable is not attached. This causes the reset to timeout
+ * and the PHY detection code in emac_init_phy() is unable to
+ * communicate and detect the AR8035-A PHY. As a result, the emac
+ * driver bails out early and the user has no ethernet.
+ * In order to stay compatible with existing configurations, the
+ * driver will temporarily switch to the internal clock, after
+ * the first reset fails.
*/
if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) {
- if (dev->phy_address == 0xffffffff &&
- dev->phy_map == 0xffffffff) {
+ if (try_internal_clock || (dev->phy_address == 0xffffffff &&
+ dev->phy_map == 0xffffffff)) {
/* No PHY: select internal loop clock before reset */
dcri_clrset(SDR0, SDR0_ETH_CFG,
0, SDR0_ETH_CFG_ECS << dev->cell_index);
@@ -392,8 +403,15 @@ static int emac_reset(struct emac_instan
#ifdef CONFIG_PPC_DCR_NATIVE
if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) {
- if (dev->phy_address == 0xffffffff &&
- dev->phy_map == 0xffffffff) {
+ if (!n && !try_internal_clock) {
+ /* first attempt has timed out. */
+ n = 20;
+ try_internal_clock = true;
+ goto do_retry;
+ }
+
+ if (try_internal_clock || (dev->phy_address == 0xffffffff &&
+ dev->phy_map == 0xffffffff)) {
/* No PHY: restore external clock source after reset */
dcri_clrset(SDR0, SDR0_ETH_CFG,
SDR0_ETH_CFG_ECS << dev->cell_index, 0);