mirror of https://github.com/hak5/openwrt.git
broadcom-diag: reoder some parts.
This was done to reduce the number of forward declaration needed. This does not contain any real change in the code. SVN-Revision: 37278lede-17.01
Hauke Mehrtens
parent
3a4a74f861
commit
63d818a219
|
|
@ -44,6 +44,21 @@ static int fill_event(struct event_t *);
|
|||
static unsigned int gpiomask = 0;
|
||||
module_param(gpiomask, int, 0644);
|
||||
|
||||
extern char *nvram_get(char *str);
|
||||
|
||||
static void register_leds(struct led_t *l);
|
||||
static void unregister_leds(struct led_t *l);
|
||||
static void led_flash(unsigned long dummy);
|
||||
|
||||
static struct platform_t platform;
|
||||
|
||||
static struct timer_list led_timer = TIMER_INITIALIZER(&led_flash, 0, 0);
|
||||
|
||||
static struct proc_dir_entry *diag, *leds;
|
||||
|
||||
static struct prochandler_t proc_model = { .type = PROC_MODEL };
|
||||
static struct prochandler_t proc_gpiomask = { .type = PROC_GPIOMASK };
|
||||
|
||||
enum {
|
||||
/* Linksys */
|
||||
WAP54GV1,
|
||||
|
|
@ -1381,6 +1396,55 @@ static void gpio_set_irqenable(int enabled, irqreturn_t (*handler)(int, void *))
|
|||
}
|
||||
}
|
||||
|
||||
static void hotplug_button(struct work_struct *work)
|
||||
{
|
||||
struct event_t *event = container_of(work, struct event_t, wq);
|
||||
char *s;
|
||||
|
||||
event->skb = alloc_skb(2048, GFP_KERNEL);
|
||||
|
||||
s = skb_put(event->skb, strlen(event->action) + 2);
|
||||
sprintf(s, "%s@", event->action);
|
||||
fill_event(event);
|
||||
|
||||
NETLINK_CB(event->skb).dst_group = 1;
|
||||
broadcast_uevent(event->skb, 0, 1, GFP_KERNEL);
|
||||
|
||||
kfree(event);
|
||||
}
|
||||
|
||||
static irqreturn_t button_handler(int irq, void *dev_id)
|
||||
{
|
||||
struct button_t *b;
|
||||
u32 in, changed;
|
||||
|
||||
in = bcm47xx_gpio_in(~0) & platform.button_mask;
|
||||
bcm47xx_gpio_polarity(platform.button_mask, in);
|
||||
changed = platform.button_polarity ^ in;
|
||||
platform.button_polarity = in;
|
||||
|
||||
changed &= ~bcm47xx_gpio_outen(0, 0);
|
||||
|
||||
for (b = platform.buttons; b->name; b++) {
|
||||
struct event_t *event;
|
||||
|
||||
if (!(b->gpio & changed)) continue;
|
||||
|
||||
b->pressed ^= 1;
|
||||
|
||||
if ((event = (struct event_t *)kzalloc (sizeof(struct event_t), GFP_ATOMIC))) {
|
||||
event->seen = (jiffies - b->seen)/HZ;
|
||||
event->name = b->name;
|
||||
event->action = b->pressed ? "pressed" : "released";
|
||||
INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
|
||||
schedule_work(&event->wq);
|
||||
}
|
||||
|
||||
b->seen = jiffies;
|
||||
}
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void register_buttons(struct button_t *b)
|
||||
{
|
||||
for (; b->name; b++)
|
||||
|
|
@ -1416,24 +1480,6 @@ static void add_msg(struct event_t *event, char *msg, int argv)
|
|||
strcpy(s, msg);
|
||||
}
|
||||
|
||||
static void hotplug_button(struct work_struct *work)
|
||||
{
|
||||
struct event_t *event = container_of(work, struct event_t, wq);
|
||||
char *s;
|
||||
|
||||
event->skb = alloc_skb(2048, GFP_KERNEL);
|
||||
|
||||
s = skb_put(event->skb, strlen(event->action) + 2);
|
||||
sprintf(s, "%s@", event->action);
|
||||
fill_event(event);
|
||||
|
||||
NETLINK_CB(event->skb).dst_group = 1;
|
||||
broadcast_uevent(event->skb, 0, 1, GFP_KERNEL);
|
||||
|
||||
kfree(event);
|
||||
}
|
||||
|
||||
|
||||
static int fill_event (struct event_t *event)
|
||||
{
|
||||
static char buf[128];
|
||||
|
|
@ -1453,106 +1499,6 @@ static int fill_event (struct event_t *event)
|
|||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static irqreturn_t button_handler(int irq, void *dev_id)
|
||||
{
|
||||
struct button_t *b;
|
||||
u32 in, changed;
|
||||
|
||||
in = bcm47xx_gpio_in(~0) & platform.button_mask;
|
||||
bcm47xx_gpio_polarity(platform.button_mask, in);
|
||||
changed = platform.button_polarity ^ in;
|
||||
platform.button_polarity = in;
|
||||
|
||||
changed &= ~bcm47xx_gpio_outen(0, 0);
|
||||
|
||||
for (b = platform.buttons; b->name; b++) {
|
||||
struct event_t *event;
|
||||
|
||||
if (!(b->gpio & changed)) continue;
|
||||
|
||||
b->pressed ^= 1;
|
||||
|
||||
if ((event = (struct event_t *)kzalloc (sizeof(struct event_t), GFP_ATOMIC))) {
|
||||
event->seen = (jiffies - b->seen)/HZ;
|
||||
event->name = b->name;
|
||||
event->action = b->pressed ? "pressed" : "released";
|
||||
INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
|
||||
schedule_work(&event->wq);
|
||||
}
|
||||
|
||||
b->seen = jiffies;
|
||||
}
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void register_leds(struct led_t *l)
|
||||
{
|
||||
struct proc_dir_entry *p;
|
||||
u32 mask = 0;
|
||||
u32 oe_mask = 0;
|
||||
u32 val = 0;
|
||||
|
||||
leds = proc_mkdir("led", diag);
|
||||
if (!leds)
|
||||
return;
|
||||
|
||||
for(; l->name; l++) {
|
||||
if (l->gpio & gpiomask)
|
||||
continue;
|
||||
|
||||
switch (l->gpio & GPIO_TYPE_MASK) {
|
||||
case GPIO_TYPE_EXTIF:
|
||||
l->state = 0;
|
||||
set_led_extif(l);
|
||||
break;
|
||||
case GPIO_TYPE_SHIFT:
|
||||
mask |= (SHIFTREG_DATA | SHIFTREG_CLK);
|
||||
oe_mask |= (SHIFTREG_DATA | SHIFTREG_CLK);
|
||||
l->state = (l->polarity != NORMAL);
|
||||
set_led_shift(l);
|
||||
break;
|
||||
case GPIO_TYPE_NORMAL:
|
||||
default:
|
||||
if (l->polarity != INPUT) oe_mask |= l->gpio;
|
||||
mask |= l->gpio;
|
||||
val |= (l->polarity == NORMAL)?0:l->gpio;
|
||||
break;
|
||||
}
|
||||
|
||||
if (l->polarity == INPUT) continue;
|
||||
|
||||
if ((p = create_proc_entry(l->name, S_IRUSR, leds))) {
|
||||
l->proc.type = PROC_LED;
|
||||
l->proc.ptr = l;
|
||||
p->data = (void *) &l->proc;
|
||||
p->proc_fops = &diag_proc_fops;
|
||||
}
|
||||
}
|
||||
|
||||
bcm47xx_gpio_outen(mask, oe_mask);
|
||||
bcm47xx_gpio_control(mask, 0);
|
||||
bcm47xx_gpio_out(mask, val);
|
||||
bcm47xx_gpio_intmask(mask, 0);
|
||||
}
|
||||
|
||||
static void unregister_leds(struct led_t *l)
|
||||
{
|
||||
for(; l->name; l++)
|
||||
remove_proc_entry(l->name, leds);
|
||||
|
||||
remove_proc_entry("led", diag);
|
||||
}
|
||||
|
||||
static void set_led_extif(struct led_t *led)
|
||||
{
|
||||
volatile u8 *addr = (volatile u8 *) KSEG1ADDR(EXTIF_UART) + (led->gpio & ~GPIO_TYPE_MASK);
|
||||
if (led->state)
|
||||
*addr = 0xFF;
|
||||
else
|
||||
*addr;
|
||||
}
|
||||
|
||||
/*
|
||||
* This should be extended to allow the platform to specify the pins and width
|
||||
* of the shift register. They're hardcoded for now because only the WNDR3700v3
|
||||
|
|
@ -1592,6 +1538,15 @@ static void set_led_shift(struct led_t *led)
|
|||
}
|
||||
}
|
||||
|
||||
static void set_led_extif(struct led_t *led)
|
||||
{
|
||||
volatile u8 *addr = (volatile u8 *) KSEG1ADDR(EXTIF_UART) + (led->gpio & ~GPIO_TYPE_MASK);
|
||||
if (led->state)
|
||||
*addr = 0xFF;
|
||||
else
|
||||
*addr;
|
||||
}
|
||||
|
||||
|
||||
static void led_flash(unsigned long dummy) {
|
||||
struct led_t *l;
|
||||
|
|
@ -1744,6 +1699,69 @@ static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count,
|
|||
return ret;
|
||||
}
|
||||
|
||||
static struct file_operations diag_proc_fops = {
|
||||
read: diag_proc_read,
|
||||
write: diag_proc_write
|
||||
};
|
||||
|
||||
static void register_leds(struct led_t *l)
|
||||
{
|
||||
struct proc_dir_entry *p;
|
||||
u32 mask = 0;
|
||||
u32 oe_mask = 0;
|
||||
u32 val = 0;
|
||||
|
||||
leds = proc_mkdir("led", diag);
|
||||
if (!leds)
|
||||
return;
|
||||
|
||||
for(; l->name; l++) {
|
||||
if (l->gpio & gpiomask)
|
||||
continue;
|
||||
|
||||
switch (l->gpio & GPIO_TYPE_MASK) {
|
||||
case GPIO_TYPE_EXTIF:
|
||||
l->state = 0;
|
||||
set_led_extif(l);
|
||||
break;
|
||||
case GPIO_TYPE_SHIFT:
|
||||
mask |= (SHIFTREG_DATA | SHIFTREG_CLK);
|
||||
oe_mask |= (SHIFTREG_DATA | SHIFTREG_CLK);
|
||||
l->state = (l->polarity != NORMAL);
|
||||
set_led_shift(l);
|
||||
break;
|
||||
case GPIO_TYPE_NORMAL:
|
||||
default:
|
||||
if (l->polarity != INPUT) oe_mask |= l->gpio;
|
||||
mask |= l->gpio;
|
||||
val |= (l->polarity == NORMAL)?0:l->gpio;
|
||||
break;
|
||||
}
|
||||
|
||||
if (l->polarity == INPUT) continue;
|
||||
|
||||
if ((p = create_proc_entry(l->name, S_IRUSR, leds))) {
|
||||
l->proc.type = PROC_LED;
|
||||
l->proc.ptr = l;
|
||||
p->data = (void *) &l->proc;
|
||||
p->proc_fops = &diag_proc_fops;
|
||||
}
|
||||
}
|
||||
|
||||
bcm47xx_gpio_outen(mask, oe_mask);
|
||||
bcm47xx_gpio_control(mask, 0);
|
||||
bcm47xx_gpio_out(mask, val);
|
||||
bcm47xx_gpio_intmask(mask, 0);
|
||||
}
|
||||
|
||||
static void unregister_leds(struct led_t *l)
|
||||
{
|
||||
for(; l->name; l++)
|
||||
remove_proc_entry(l->name, leds);
|
||||
|
||||
remove_proc_entry("led", diag);
|
||||
}
|
||||
|
||||
static int __init diag_init(void)
|
||||
{
|
||||
static struct proc_dir_entry *p;
|
||||
|
|
|
|||
|
|
@ -85,51 +85,3 @@ struct event_t {
|
|||
u8 enr, anr;
|
||||
#endif
|
||||
};
|
||||
|
||||
extern char *nvram_get(char *str);
|
||||
|
||||
static struct platform_t platform;
|
||||
|
||||
/* buttons */
|
||||
|
||||
static void register_buttons(struct button_t *b);
|
||||
static void unregister_buttons(struct button_t *b);
|
||||
|
||||
static void hotplug_button(struct work_struct *work);
|
||||
static irqreturn_t button_handler(int irq, void *dev_id);
|
||||
|
||||
/* leds */
|
||||
|
||||
static void register_leds(struct led_t *l);
|
||||
static void unregister_leds(struct led_t *l);
|
||||
|
||||
static void set_led_extif(struct led_t *led);
|
||||
static void set_led_shift(struct led_t *led);
|
||||
static void led_flash(unsigned long dummy);
|
||||
|
||||
/* 2.4 compatibility */
|
||||
#ifndef TIMER_INITIALIZER
|
||||
#define TIMER_INITIALIZER(_function, _expires, _data) \
|
||||
{ \
|
||||
/* _expires and _data currently unused */ \
|
||||
function: _function \
|
||||
}
|
||||
#endif
|
||||
|
||||
static struct timer_list led_timer = TIMER_INITIALIZER(&led_flash, 0, 0);
|
||||
|
||||
/* proc */
|
||||
|
||||
static struct proc_dir_entry *diag, *leds;
|
||||
|
||||
static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos);
|
||||
static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, loff_t *ppos);
|
||||
|
||||
static struct file_operations diag_proc_fops = {
|
||||
read: diag_proc_read,
|
||||
write: diag_proc_write
|
||||
};
|
||||
|
||||
static struct prochandler_t proc_model = { .type = PROC_MODEL };
|
||||
static struct prochandler_t proc_gpiomask = { .type = PROC_GPIOMASK };
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue