hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

cleanup old patches and kernel configuration 

SVN-Revision: 16204
lede-17.01
Florian Fainelli 2009-05-30 09:53:59 +00:00
parent 733b0a1ff8
commit 5f0333d896
25 changed files with 0 additions and 1126 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

180
target/linux/rb532/config-2.6.28
View File

@ -1,180 +0,0 @@
CONFIG_32BIT=y
# CONFIG_64BIT is not set
# CONFIG_8139TOO is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_PIIX is not set
CONFIG_ATA_SFF=y
CONFIG_BASE_SMALL=0
# CONFIG_BCM47XX is not set
CONFIG_BITREVERSE=y
CONFIG_BLK_DEV_SD=y
CONFIG_BOOT_RAW=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CLASSIC_RCU=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_LOONGSON2 is not set
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
CONFIG_CPU_MIPSR1=y
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set
CONFIG_CSRC_R4K=y
# CONFIG_DEBUG_FS is not set
CONFIG_DEVPORT=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_EXT2_FS=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_HAVE_IDE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_I2C is not set
# CONFIG_IDE is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQ_CPU=y
CONFIG_KEXEC=y
CONFIG_KORINA=y
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_EMMA is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MACH_TX39XX is not set
# CONFIG_MACH_TX49XX is not set
# CONFIG_MACH_VR41XX is not set
CONFIG_MIKROTIK_RB532=y
CONFIG_MIPS=y
# CONFIG_MIPS_COBALT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=4
# CONFIG_MIPS_MACHINE is not set
# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_SIM is not set
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_AMDSTD is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_START=0x8000000
# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
# CONFIG_MTD_ROOTFS_SPLIT is not set
# CONFIG_NATSEMI is not set
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
# CONFIG_NO_IOPORT is not set
# CONFIG_NXP_STB220 is not set
# CONFIG_NXP_STB225 is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PATA_RB532=y
# CONFIG_PATA_SCH is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PROBE_INITRD_HEADER is not set
# CONFIG_PROM_EMU is not set
# CONFIG_R6040 is not set
CONFIG_RC32434_WDT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_SCSI=y
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_PROC_FS is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_SWARM is not set
CONFIG_SWAP_IO_SPACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
# CONFIG_TC35815 is not set
CONFIG_TRAD_SIGNALS=y
# CONFIG_VGASTATE is not set
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
CONFIG_YAFFS_9BYTE_TAGS=y
# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
CONFIG_YAFFS_AUTO_YAFFS2=y
# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
CONFIG_YAFFS_FS=y
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
CONFIG_YAFFS_YAFFS1=y
CONFIG_YAFFS_YAFFS2=y
CONFIG_ZONE_DMA_FLAG=0

36
target/linux/rb532/patches-2.6.28/002-pci_io_map_base.patch
View File

@ -1,36 +0,0 @@
The code is rather based on trial-and-error than knowledge. Verified Via
Rhine functionality in PIO as well as MMIO mode.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Tested-by: Florian Fainelli <florian@openwrt.org>
---
arch/mips/pci/pci-rc32434.c | 11 +++++++++++
1 files changed, 11 insertions(+), 0 deletions(-)
--- a/arch/mips/pci/pci-rc32434.c
+++ b/arch/mips/pci/pci-rc32434.c
@@ -205,6 +205,8 @@ static int __init rc32434_pcibridge_init
static int __init rc32434_pci_init(void)
{
+ void __iomem *io_map_base;
+
pr_info("PCI: Initializing PCI\n");
ioport_resource.start = rc32434_res_pci_io1.start;
@@ -212,6 +214,15 @@ static int __init rc32434_pci_init(void)
rc32434_pcibridge_init();
+ io_map_base = ioremap(rc32434_res_pci_io1.start,
+ rc32434_res_pci_io1.end - rc32434_res_pci_io1.start + 1);
+
+ if (!io_map_base)
+ return -ENOMEM;
+
+ rc32434_controller.io_map_base =
+ (unsigned long)io_map_base - rc32434_res_pci_io1.start;
+
register_pci_controller(&rc32434_controller);
rc32434_sync();

28
target/linux/rb532/patches-2.6.28/003-gpio_bit_setting.patch
View File

@ -1,28 +0,0 @@
The algorithm works unconditionally. If bitval is one, the first line is
a no op and the second line sets the bit at offset position. Vice versa,
if bitval is zero, the first line clears the bit at offset position and
the second line is a no op.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
arch/mips/rb532/gpio.c | 6 ++----
1 files changed, 2 insertions(+), 4 deletions(-)
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -119,13 +119,11 @@ static inline void rb532_set_bit(unsigne
unsigned long flags;
u32 val;
- bitval = !!bitval; /* map parameter to {0,1} */
-
local_irq_save(flags);
val = readl(ioaddr);
- val &= ~( ~bitval << offset ); /* unset bit if bitval == 0 */
- val |= ( bitval << offset ); /* set bit if bitval == 1 */
+ val &= ~(!bitval << offset); /* unset bit if bitval == 0 */
+ val |= (!!bitval << offset); /* set bit if bitval == 1 */
writel(val, ioaddr);
local_irq_restore(flags);

51
target/linux/rb532/patches-2.6.28/004-fix_pata_rb532_cf.patch
View File

@ -1,51 +0,0 @@
After applying the following changes I could verify functionality by
mounting a filesystem on the cfdisk and reading/writing files in it.
The set_irq_type() function must be wrong, as there is no set_type()
function defined for the rb532 IRQ chip. But as the used IRQ actually is
being triggered by a GPIO, setting it's interrupt level should be the
right alternative. Also to clear a GPIO triggered IRQ, the source has to
be cleared. This is being done at the end of rb532_pata_irq_handler.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
---
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -31,6 +31,7 @@
#include <scsi/scsi_host.h>
#include <asm/gpio.h>
+#include <asm/mach-rc32434/gpio.h>
#define DRV_NAME "pata-rb532-cf"
#define DRV_VERSION "0.1.0"
@@ -63,8 +64,8 @@ static inline void rb532_pata_finish_io(
ata_sff_sync might be sufficient. */
ata_sff_dma_pause(ap);
ndelay(RB500_CF_IO_DELAY);
-
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
+
+ rb532_gpio_set_ilevel(1, info->gpio_line);
}
static void rb532_pata_exec_command(struct ata_port *ap,
@@ -113,13 +114,15 @@ static irqreturn_t rb532_pata_irq_handle
struct rb532_cf_info *info = ah->private_data;
if (gpio_get_value(info->gpio_line)) {
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
+ rb532_gpio_set_ilevel(0, info->gpio_line);
if (!info->frozen)
ata_sff_interrupt(info->irq, dev_instance);
} else {
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
+ rb532_gpio_set_ilevel(1, info->gpio_line);
}
+ rb532_gpio_set_istat(0, info->gpio_line);
+
return IRQ_HANDLED;
}

32
target/linux/rb532/patches-2.6.28/005-pata_rb532_cf_4bytes_rw.patch
View File

@ -1,32 +0,0 @@
* rename the offset definition to avoid abiguity with the standard ATA
IO address
* read and write four bytes at once like the original driver does
* use writesl() and readsl() which implicitly iterate over the data
This patch assumes buflen to be a multiple of four, which is true for
ATA devices. ATAPI support is not known, though unlikely, as the
original driver always transfers 512 Bytes at once.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Sergei Shtyltov <sshtylyov@ru.mvista.com>
---
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -82,13 +82,10 @@ static unsigned int rb532_pata_data_xfer
void __iomem *ioaddr = ap->ioaddr.data_addr;
int retlen = buflen;
- if (write_data) {
- for (; buflen > 0; buflen--, buf++)
- writeb(*buf, ioaddr);
- } else {
- for (; buflen > 0; buflen--, buf++)
- *buf = readb(ioaddr);
- }
+ if (write_data)
+ writesl(ioaddr, buf, buflen / sizeof(u32));
+ else
+ readsl(ioaddr, buf, buflen / sizeof(u32));
rb532_pata_finish_io(adev->link->ap);
return retlen;

18
target/linux/rb532/patches-2.6.28/006-pata_rb532_cf_fix_prototype.patch
View File

@ -1,18 +0,0 @@
Per definition, this function should return the number of bytes
consumed. Also take care of the unlikely case when buflen is not a
multiple of four; while transferring, the division cuts the remaining
bytes, so alter the return value accordingly.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -88,7 +88,7 @@ static unsigned int rb532_pata_data_xfer
readsl(ioaddr, buf, buflen / sizeof(u32));
rb532_pata_finish_io(adev->link->ap);
- return retlen;
+ return buflen - (buflen % sizeof(u32));;
}
static void rb532_pata_freeze(struct ata_port *ap)

34
target/linux/rb532/patches-2.6.28/007-cmdline_hack.patch
View File

@ -1,34 +0,0 @@
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -123,6 +123,11 @@
j kernel_entry
nop
+
+
+EXPORT(_image_cmdline)
+ .ascii "CMDLINE:"
+
#ifndef CONFIG_NO_EXCEPT_FILL
/*
* Reserved space for exception handlers.
--- a/arch/mips/rb532/prom.c
+++ b/arch/mips/rb532/prom.c
@@ -67,6 +67,7 @@
return simple_strtoul(num, 0, 10);
}
+extern char _image_cmdline;
void __init prom_setup_cmdline(void)
{
char cmd_line[CL_SIZE];
@@ -109,6 +110,9 @@
}
*(cp++) = ' ';
+ strcpy(cp,(&_image_cmdline + 8));
+ cp += strlen(&_image_cmdline);
+
i = strlen(arcs_cmdline);
if (i > 0) {
*(cp++) = ' ';

25
target/linux/rb532/patches-2.6.28/008-korina_reset_resource_buffer_size_1536.patch
View File

@ -1,25 +0,0 @@
The new value is the one used in the external patch before and allows at
least a standard MTU of 1500 to be handled correctly. Impact of this
change gets visible when bigger packets are to be received, issuing:
| ping -s 492 <IP>
and bigger payload sized led to 100% packet loss.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -84,7 +84,10 @@
#define KORINA_NUM_RDS 64 /* number of receive descriptors */
#define KORINA_NUM_TDS 64 /* number of transmit descriptors */
-#define KORINA_RBSIZE 536 /* size of one resource buffer = Ether MTU */
+/* KORINA_RBSIZE is the hardware's default maximum receive
+ * frame size in bytes. Having this hardcoded means that there
+ * is no support for MTU sizes greater than 1500. */
+#define KORINA_RBSIZE 1536 /* size of one resource buffer = Ether MTU */
#define KORINA_RDS_MASK (KORINA_NUM_RDS - 1)
#define KORINA_TDS_MASK (KORINA_NUM_TDS - 1)
#define RD_RING_SIZE (KORINA_NUM_RDS * sizeof(struct dma_desc))

27
target/linux/rb532/patches-2.6.28/009-korina_disable_napi_on_close_and_restart.patch
View File

@ -1,27 +0,0 @@
Without this the driver will crash when the NIC is being restarted.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -905,6 +905,8 @@ static int korina_restart(struct net_dev
korina_free_ring(dev);
+ napi_disable(&lp->napi);
+
ret = korina_init(dev);
if (ret < 0) {
printk(KERN_ERR DRV_NAME "%s: cannot restart device\n",
@@ -1071,6 +1073,8 @@ static int korina_close(struct net_devic
korina_free_ring(dev);
+ napi_disable(&lp->napi);
+
free_irq(lp->rx_irq, dev);
free_irq(lp->tx_irq, dev);
free_irq(lp->ovr_irq, dev);

138
target/linux/rb532/patches-2.6.28/010-korina_rework_korina_rx.patch
View File

@ -1,138 +0,0 @@
This function needs an early exit condition to function properly, or
else caller assumes napi workload wasn't enough to handle all received
packets and korina_rx is called again (and again and again and ...).
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -353,15 +353,20 @@ static int korina_rx(struct net_device *
struct dma_desc *rd = &lp->rd_ring[lp->rx_next_done];
struct sk_buff *skb, *skb_new;
u8 *pkt_buf;
- u32 devcs, pkt_len, dmas, rx_free_desc;
+ u32 devcs, pkt_len, dmas;
int count;
dma_cache_inv((u32)rd, sizeof(*rd));
for (count = 0; count < limit; count++) {
+ skb = lp->rx_skb[lp->rx_next_done];
+ skb_new = NULL;
devcs = rd->devcs;
+ if ((KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) == 0)
+ break;
+
/* Update statistics counters */
if (devcs & ETH_RX_CRC)
dev->stats.rx_crc_errors++;
@@ -384,64 +389,53 @@ static int korina_rx(struct net_device *
* in Rc32434 (errata ref #077) */
dev->stats.rx_errors++;
dev->stats.rx_dropped++;
- }
-
- while ((rx_free_desc = KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) {
- /* init the var. used for the later
- * operations within the while loop */
- skb_new = NULL;
+ } else if ((devcs & ETH_RX_ROK)) {
pkt_len = RCVPKT_LENGTH(devcs);
- skb = lp->rx_skb[lp->rx_next_done];
+ /* must be the (first and) last
+ * descriptor then */
+ pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
+
+ /* invalidate the cache */
+ dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
+
+ /* Malloc up new buffer. */
+ skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
+
+ if (!skb_new)
+ break;
+ /* Do not count the CRC */
+ skb_put(skb, pkt_len - 4);
+ skb->protocol = eth_type_trans(skb, dev);
+
+ /* Pass the packet to upper layers */
+ netif_receive_skb(skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
+
+ /* Update the mcast stats */
+ if (devcs & ETH_RX_MP)
+ dev->stats.multicast++;
- if ((devcs & ETH_RX_ROK)) {
- /* must be the (first and) last
- * descriptor then */
- pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
-
- /* invalidate the cache */
- dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
-
- /* Malloc up new buffer. */
- skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
-
- if (!skb_new)
- break;
- /* Do not count the CRC */
- skb_put(skb, pkt_len - 4);
- skb->protocol = eth_type_trans(skb, dev);
-
- /* Pass the packet to upper layers */
- netif_receive_skb(skb);
- dev->last_rx = jiffies;
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += pkt_len;
-
- /* Update the mcast stats */
- if (devcs & ETH_RX_MP)
- dev->stats.multicast++;
-
- lp->rx_skb[lp->rx_next_done] = skb_new;
- }
-
- rd->devcs = 0;
-
- /* Restore descriptor's curr_addr */
- if (skb_new)
- rd->ca = CPHYSADDR(skb_new->data);
- else
- rd->ca = CPHYSADDR(skb->data);
+ lp->rx_skb[lp->rx_next_done] = skb_new;
+ }
+ rd->devcs = 0;
+
+ /* Restore descriptor's curr_addr */
+ if (skb_new)
+ rd->ca = CPHYSADDR(skb_new->data);
+ else
+ rd->ca = CPHYSADDR(skb->data);
- rd->control = DMA_COUNT(KORINA_RBSIZE) |
+ rd->control = DMA_COUNT(KORINA_RBSIZE) |
DMA_DESC_COD | DMA_DESC_IOD;
- lp->rd_ring[(lp->rx_next_done - 1) &
- KORINA_RDS_MASK].control &=
- ~DMA_DESC_COD;
-
- lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
- dma_cache_wback((u32)rd, sizeof(*rd));
- rd = &lp->rd_ring[lp->rx_next_done];
- writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
- }
+ lp->rd_ring[(lp->rx_next_done - 1) &
+ KORINA_RDS_MASK].control &=
+ ~DMA_DESC_COD;
+
+ lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
+ dma_cache_wback((u32)rd, sizeof(*rd));
+ rd = &lp->rd_ring[lp->rx_next_done];
+ writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
}
dmas = readl(&lp->rx_dma_regs->dmas);

18
target/linux/rb532/patches-2.6.28/011-korina_do_schedule_napi_after_testing_it.patch
View File

@ -1,18 +0,0 @@
The called netif_rx_schedule() does all the work for us:
- it checks the return value of netif_rx_schedule_prep() and
- if everything is ok calls __netif_rx_schedule().
Before this change, the driver received absolutely nothing.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -330,7 +330,7 @@ static irqreturn_t korina_rx_dma_interru
dmas = readl(&lp->rx_dma_regs->dmas);
if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
- netif_rx_schedule_prep(dev, &lp->napi);
+ netif_rx_schedule(dev, &lp->napi);
dmasm = readl(&lp->rx_dma_regs->dmasm);
writel(dmasm | (DMA_STAT_DONE |

40
target/linux/rb532/patches-2.6.28/012-korina_do_tx_at_right_position.patch
View File

@ -1,40 +0,0 @@
Triggering TX before the write to the DMA status mask register leads to
transferring packets with maximum payload no matter what the actual
packet size is.
While here, also trigger RX scheduling after writing the DMA status mask
register, like it was in the original driver before it was sent
upstream.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -330,12 +330,12 @@ static irqreturn_t korina_rx_dma_interru
dmas = readl(&lp->rx_dma_regs->dmas);
if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
- netif_rx_schedule(dev, &lp->napi);
-
dmasm = readl(&lp->rx_dma_regs->dmasm);
writel(dmasm | (DMA_STAT_DONE |
DMA_STAT_HALT | DMA_STAT_ERR),
&lp->rx_dma_regs->dmasm);
+
+ netif_rx_schedule(dev, &lp->napi);
if (dmas & DMA_STAT_ERR)
printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
@@ -621,11 +621,11 @@ korina_tx_dma_interrupt(int irq, void *d
dmas = readl(&lp->tx_dma_regs->dmas);
if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) {
- korina_tx(dev);
-
dmasm = readl(&lp->tx_dma_regs->dmasm);
writel(dmasm | (DMA_STAT_FINI | DMA_STAT_ERR),
&lp->tx_dma_regs->dmasm);
+
+ korina_tx(dev);
if (lp->tx_chain_status == desc_filled &&
(readl(&(lp->tx_dma_regs->dmandptr)) == 0)) {

81
target/linux/rb532/patches-2.6.28/013-korina_fix_handling_tx_chain_tail.patch
View File

@ -1,81 +0,0 @@
Originally this must have been a rewrite error when introducing
'chain_index'. But the original driver did not use the previous chain
item everywhere: when altering the address tx_chain_tail points to, it
should move forward, not backwards.
Also this is not an "index" but rather the penultimate element in the
chain, so rename it accordingly.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 22 +++++++++++-----------
1 files changed, 11 insertions(+), 11 deletions(-)
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -199,7 +199,7 @@ static int korina_send_packet(struct sk_
struct korina_private *lp = netdev_priv(dev);
unsigned long flags;
u32 length;
- u32 chain_index;
+ u32 chain_prev, chain_next;
struct dma_desc *td;
spin_lock_irqsave(&lp->lock, flags);
@@ -231,8 +231,8 @@ static int korina_send_packet(struct sk_
/* Setup the transmit descriptor. */
dma_cache_inv((u32) td, sizeof(*td));
td->ca = CPHYSADDR(skb->data);
- chain_index = (lp->tx_chain_tail - 1) &
- KORINA_TDS_MASK;
+ chain_prev = (lp->tx_chain_tail - 1) & KORINA_TDS_MASK;
+ chain_next = (lp->tx_chain_tail + 1) & KORINA_TDS_MASK;
if (readl(&(lp->tx_dma_regs->dmandptr)) == 0) {
if (lp->tx_chain_status == desc_empty) {
@@ -240,7 +240,7 @@ static int korina_send_packet(struct sk_
td->control = DMA_COUNT(length) |
DMA_DESC_COF | DMA_DESC_IOF;
/* Move tail */
- lp->tx_chain_tail = chain_index;
+ lp->tx_chain_tail = chain_next;
/* Write to NDPTR */
writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
&lp->tx_dma_regs->dmandptr);
@@ -251,12 +251,12 @@ static int korina_send_packet(struct sk_
td->control = DMA_COUNT(length) |
DMA_DESC_COF | DMA_DESC_IOF;
/* Link to prev */
- lp->td_ring[chain_index].control &=
+ lp->td_ring[chain_prev].control &=
~DMA_DESC_COF;
/* Link to prev */
- lp->td_ring[chain_index].link = CPHYSADDR(td);
+ lp->td_ring[chain_prev].link = CPHYSADDR(td);
/* Move tail */
- lp->tx_chain_tail = chain_index;
+ lp->tx_chain_tail = chain_next;
/* Write to NDPTR */
writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
&(lp->tx_dma_regs->dmandptr));
@@ -270,17 +270,17 @@ static int korina_send_packet(struct sk_
td->control = DMA_COUNT(length) |
DMA_DESC_COF | DMA_DESC_IOF;
/* Move tail */
- lp->tx_chain_tail = chain_index;
+ lp->tx_chain_tail = chain_next;
lp->tx_chain_status = desc_filled;
netif_stop_queue(dev);
} else {
/* Update tail */
td->control = DMA_COUNT(length) |
DMA_DESC_COF | DMA_DESC_IOF;
- lp->td_ring[chain_index].control &=
+ lp->td_ring[chain_prev].control &=
~DMA_DESC_COF;
- lp->td_ring[chain_index].link = CPHYSADDR(td);
- lp->tx_chain_tail = chain_index;
+ lp->td_ring[chain_prev].link = CPHYSADDR(td);
+ lp->tx_chain_tail = chain_next;
}
}
dma_cache_wback((u32) td, sizeof(*td));

19
target/linux/rb532/patches-2.6.28/014-korina_do_not_stop_queue_here.patch
View File

@ -1,19 +0,0 @@
Apparently this doesn't make sense. Otherwise the queue gets disabled as
soon as it's getting empty and can only be resurrected by a driver
restart.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -272,7 +272,6 @@ static int korina_send_packet(struct sk_
/* Move tail */
lp->tx_chain_tail = chain_next;
lp->tx_chain_status = desc_filled;
- netif_stop_queue(dev);
} else {
/* Update tail */
td->control = DMA_COUNT(length) |

47
target/linux/rb532/patches-2.6.28/015-korina_irqf_flags.patch
View File

@ -1,47 +0,0 @@
As the kernel warning states: "IRQF_DISABLED is not guaranteed on shared
IRQs". Since these IRQs' values are hardcoded and my test system doesn't
show any shared use of IRQs at all, rather make them non-shared than
non-disabled.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -998,14 +998,14 @@ static int korina_open(struct net_device
* that handles the Done Finished
* Ovr and Und Events */
ret = request_irq(lp->rx_irq, &korina_rx_dma_interrupt,
- IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Rx", dev);
+ IRQF_DISABLED, "Korina ethernet Rx", dev);
if (ret < 0) {
printk(KERN_ERR DRV_NAME "%s: unable to get Rx DMA IRQ %d\n",
dev->name, lp->rx_irq);
goto err_release;
}
ret = request_irq(lp->tx_irq, &korina_tx_dma_interrupt,
- IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Tx", dev);
+ IRQF_DISABLED, "Korina ethernet Tx", dev);
if (ret < 0) {
printk(KERN_ERR DRV_NAME "%s: unable to get Tx DMA IRQ %d\n",
dev->name, lp->tx_irq);
@@ -1014,7 +1014,7 @@ static int korina_open(struct net_device
/* Install handler for overrun error. */
ret = request_irq(lp->ovr_irq, &korina_ovr_interrupt,
- IRQF_SHARED | IRQF_DISABLED, "Ethernet Overflow", dev);
+ IRQF_DISABLED, "Ethernet Overflow", dev);
if (ret < 0) {
printk(KERN_ERR DRV_NAME"%s: unable to get OVR IRQ %d\n",
dev->name, lp->ovr_irq);
@@ -1023,7 +1023,7 @@ static int korina_open(struct net_device
/* Install handler for underflow error. */
ret = request_irq(lp->und_irq, &korina_und_interrupt,
- IRQF_SHARED | IRQF_DISABLED, "Ethernet Underflow", dev);
+ IRQF_DISABLED, "Ethernet Underflow", dev);
if (ret < 0) {
printk(KERN_ERR DRV_NAME "%s: unable to get UND IRQ %d\n",
dev->name, lp->und_irq);

28
target/linux/rb532/patches-2.6.28/016-korina_drop_left_over_assignment.patch
View File

@ -1,28 +0,0 @@
As the assigned value is being overwritten shortly after, it can be
dropped and so the whole variable definition moved to the start of the
function.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -738,6 +738,7 @@ static struct ethtool_ops netdev_ethtool
static void korina_alloc_ring(struct net_device *dev)
{
struct korina_private *lp = netdev_priv(dev);
+ struct sk_buff *skb;
int i;
/* Initialize the transmit descriptors */
@@ -753,8 +754,6 @@ static void korina_alloc_ring(struct net
/* Initialize the receive descriptors */
for (i = 0; i < KORINA_NUM_RDS; i++) {
- struct sk_buff *skb = lp->rx_skb[i];
-
skb = dev_alloc_skb(KORINA_RBSIZE + 2);
if (!skb)
break;

30
target/linux/rb532/patches-2.6.28/017-korina_fix_loop_back_rx_desc.patch
View File

@ -1,30 +0,0 @@
After the last loop iteration, i has the value RC32434_NUM_RDS and
therefore leads to an index overflow when used afterwards to address the
last element. This is yet another another bug introduced when rewriting
parts of the driver for upstream preparation, as the original driver
used 'RC32434_NUM_RDS - 1' instead.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -766,11 +766,12 @@ static void korina_alloc_ring(struct net
lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]);
}
- /* loop back */
- lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[0]);
- lp->rx_next_done = 0;
+ /* loop back receive descriptors, so the last
+ * descriptor points to the first one */
+ lp->rd_ring[i - 1].link = CPHYSADDR(&lp->rd_ring[0]);
+ lp->rd_ring[i - 1].control |= DMA_DESC_COD;
- lp->rd_ring[i].control |= DMA_DESC_COD;
+ lp->rx_next_done = 0;
lp->rx_chain_head = 0;
lp->rx_chain_tail = 0;
lp->rx_chain_status = desc_empty;

22
target/linux/rb532/patches-2.6.28/018-korina_adjust_headroom.patch
View File

@ -1,22 +0,0 @@
This is copy and paste from the original driver. As skb_reserve() is
also called within korina_alloc_ring() when initially allocating the
receive descriptors, the same should be done when allocating new space
after passing an skb to upper layers.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -415,6 +415,9 @@ static int korina_rx(struct net_device *
if (devcs & ETH_RX_MP)
dev->stats.multicast++;
+ /* 16 bit align */
+ skb_reserve(skb_new, 2);
+
lp->rx_skb[lp->rx_next_done] = skb_new;
}
rd->devcs = 0;

27
target/linux/rb532/patches-2.6.28/019-korina_set_dev_field_allocated_skb.patch
View File

@ -1,27 +0,0 @@
I'm not sure if this is necessary, but the original driver did it and
apparently also many other drivers do it, so it should not be completely
wrong to do it.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -418,6 +418,7 @@ static int korina_rx(struct net_device *
/* 16 bit align */
skb_reserve(skb_new, 2);
+ skb_new->dev = dev;
lp->rx_skb[lp->rx_next_done] = skb_new;
}
rd->devcs = 0;
@@ -761,6 +762,7 @@ static void korina_alloc_ring(struct net
if (!skb)
break;
skb_reserve(skb, 2);
+ skb->dev = dev;
lp->rx_skb[i] = skb;
lp->rd_ring[i].control = DMA_DESC_IOD |
DMA_COUNT(KORINA_RBSIZE);

20
target/linux/rb532/patches-2.6.28/021-rb532_driver_data.patch
View File

@ -1,20 +0,0 @@
As the korina ethernet driver uses platform_get_drvdata() to extract the
driver specific data from the platform device, driver_data has to be
used here.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
arch/mips/rb532/devices.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -86,7 +86,7 @@ static struct korina_device korina_dev0_
static struct platform_device korina_dev0 = {
.id = -1,
.name = "korina",
- .dev.platform_data = &korina_dev0_data,
+ .dev.driver_data = &korina_dev0_data,
.resource = korina_dev0_res,
.num_resources = ARRAY_SIZE(korina_dev0_res),
};

83
target/linux/rb532/patches-2.6.28/022-rb532_uart_autodetect.patch
View File

@ -1,83 +0,0 @@
Auto-detection works just fine, so use it instead of specifying the type
manually. Also define a platform device for the uart, as suggested by
David Daney.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
arch/mips/rb532/devices.c | 26 ++++++++++++++++++++++++++
arch/mips/rb532/serial.c | 2 +-
2 files changed, 27 insertions(+), 1 deletions(-)
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -24,6 +24,7 @@
#include <linux/mtd/partitions.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
+#include <linux/serial_8250.h>
#include <asm/bootinfo.h>
@@ -39,6 +40,8 @@
#define ETH0_RX_DMA_ADDR (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
#define ETH0_TX_DMA_ADDR (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
+extern unsigned int idt_cpu_freq;
+
static struct resource korina_dev0_res[] = {
{
.name = "korina_regs",
@@ -214,12 +217,32 @@ static struct platform_device rb532_wdt
.num_resources = ARRAY_SIZE(rb532_wdt_res),
};
+static struct plat_serial8250_port rb532_uart_res[] = {
+ {
+ .membase = (char *)KSEG1ADDR(REGBASE + UART0BASE),
+ .irq = UART0_IRQ,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF,
+ },
+ {
+ .flags = 0,
+ }
+};
+
+static struct platform_device rb532_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = &rb532_uart_res,
+};
+
static struct platform_device *rb532_devs[] = {
&korina_dev0,
&nand_slot0,
&cf_slot0,
&rb532_led,
&rb532_button,
+ &rb532_uart,
&rb532_wdt
};
@@ -294,6 +317,9 @@ static int __init plat_setup_devices(voi
/* Initialise the NAND device */
rb532_nand_setup();
+ /* set the uart clock to the current cpu frequency */
+ rb532_uart_res[0].uartclk = idt_cpu_freq;
+
return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
}
--- a/arch/mips/rb532/serial.c
+++ b/arch/mips/rb532/serial.c
@@ -36,7 +36,7 @@
extern unsigned int idt_cpu_freq;
static struct uart_port rb532_uart = {
- .type = PORT_16550A,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
.irq = UART0_IRQ,
.iotype = UPIO_MEM,

26
target/linux/rb532/patches-2.6.28/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch
View File

@ -1,26 +0,0 @@
This register just contains the address of the actual resource, so
initialisation has to be the same as cf_slot0_res and nand_slot0_res.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -55,8 +55,6 @@ static struct resource rb532_gpio_reg0_r
static struct resource rb532_dev3_ctl_res[] = {
{
.name = "dev3_ctl",
- .start = REGBASE + DEV3BASE,
- .end = REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -251,6 +249,9 @@ int __init rb532_gpio_init(void)
/* Register our GPIO chip */
gpiochip_add(&rb532_gpio_chip->chip);
+ rb532_dev3_ctl_res[0].start = readl(IDT434_REG_BASE + DEV3BASE);
+ rb532_dev3_ctl_res[0].end = rb532_dev3_ctl_res[0].start + 0x1000;
+
r = rb532_dev3_ctl_res;
dev3.base = ioremap_nocache(r->start, r->end - r->start);

17
target/linux/rb532/patches-2.6.28/024-rb532_fix_set_latch_u5.patch
View File

@ -1,17 +0,0 @@
The data to be written is just a byte, so use writeb instead of writel.
Also, dev3.base contains the address, not the data so referencing here
is wrong.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -93,7 +93,7 @@ void set_latch_u5(unsigned char or_mask,
spin_lock_irqsave(&dev3.lock, flags);
dev3.state = (dev3.state | or_mask) & ~nand_mask;
- writel(dev3.state, &dev3.base);
+ writeb(dev3.state, dev3.base);
spin_unlock_irqrestore(&dev3.lock, flags);
}

48
target/linux/rb532/patches-2.6.28/025-rb532_nand_fixup.patch
View File

@ -1,48 +0,0 @@
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -119,6 +119,19 @@ static struct platform_device cf_slot0 =
};
/* Resources and device for NAND */
+
+/*
+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
+ * will not be able to find the kernel that we load. So set the oobinfo
+ * when creating the partitions
+ */
+static struct nand_ecclayout rb532_nand_ecclayout = {
+ .eccbytes = 6,
+ .eccpos = { 8, 9, 10, 13, 14, 15 },
+ .oobavail = 9,
+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
static int rb532_dev_ready(struct mtd_info *mtd)
{
return gpio_get_value(GPIO_RDY);
@@ -277,6 +290,16 @@ static void __init parse_mac_addr(char *
/* NAND definitions */
#define NAND_CHIP_DELAY 25
+static int rb532_nand_fixup(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (mtd->writesize == 512)
+ chip->ecc.layout = &rb532_nand_ecclayout;
+
+ return 0;
+}
+
static void __init rb532_nand_setup(void)
{
switch (mips_machtype) {
@@ -296,6 +319,8 @@ static void __init rb532_nand_setup(void
rb532_nand_data.chip.partitions = rb532_partition_info;
rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
+
+ rb532_nand_data.chip.chip_fixup = &rb532_nand_fixup;
}

51
target/linux/rb532/patches-2.6.28/100-check_media.patch
View File

@ -1,51 +0,0 @@
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -133,6 +133,7 @@ struct korina_private {
int dma_halt_cnt;
int dma_run_cnt;
struct napi_struct napi;
+ struct timer_list media_check_timer;
struct mii_if_info mii_if;
struct net_device *dev;
int phy_addr;
@@ -663,6 +664,15 @@ static void korina_check_media(struct ne
&lp->eth_regs->ethmac2);
}
+static void korina_poll_media(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct korina_private *lp = netdev_priv(dev);
+
+ korina_check_media(dev, 0);
+ mod_timer(&lp->media_check_timer, jiffies + HZ);
+}
+
static void korina_set_carrier(struct mii_if_info *mii)
{
if (mii->force_media) {
@@ -1034,6 +1044,7 @@ static int korina_open(struct net_device
dev->name, lp->und_irq);
goto err_free_ovr_irq;
}
+ mod_timer(&lp->media_check_timer, jiffies + 1);
out:
return ret;
@@ -1053,6 +1064,8 @@ static int korina_close(struct net_devic
struct korina_private *lp = netdev_priv(dev);
u32 tmp;
+ del_timer(&lp->media_check_timer);
+
/* Disable interrupts */
disable_irq(lp->rx_irq);
disable_irq(lp->tx_irq);
@@ -1177,6 +1190,7 @@ static int korina_probe(struct platform_
": cannot register net device %d\n", rc);
goto probe_err_register;
}
+ setup_timer(&lp->media_check_timer, korina_poll_media, (unsigned long) dev);
out:
return rc;