mirror of https://github.com/hak5/openwrt.git
mpc85xx: add support for Freescale (NXP) P2020RDB
This commit add initial support for Freescale (NXP) P2020RDB Hardware: SoC: P2020 2x1GHz DRAM: 512-1GB DDR3 2 + 4 GBE (2 separate ports and four in VSC7385) Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR PCIE x1 and mPCIE x1 SD Reader Interfaces: GBE RJ45 x6 USB2.0 x1 UART x2 I2C x2 JTAG x1 SD x1 PCIE x2 (PCIE and mPCIE) Flash instructions: Place sysupgrade image to 0x80000 address in NOR. Eg. (no brakelines in setenv command): setenv 'firmware_flash tftpboot $loadaddr $firmwarefile; protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize; cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize; cmp.b $loadaddr $norfdtaddr $filesize' setenv firmwarefile firmware.bin run firmware_flash Boot (no brakeline in setenv command): setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev, $baudrate rootfstype=squashfs $othbootargs; bootm $norfdtaddr' saveenv boot Known issues: -Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI) -No SD reader support Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]openwrt-19.07
Pawel Dembicki
Christian Lamparter
parent
ed2839ac41
commit
5de6aed42c
|
|
@ -12,7 +12,7 @@ BOARDNAME:=Freescale MPC85xx
|
|||
CPU_TYPE:=8540
|
||||
FEATURES:=squashfs
|
||||
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
|
||||
SUBTARGETS:=generic p1020
|
||||
SUBTARGETS:=generic p1020 p2020
|
||||
|
||||
KERNEL_PATCHVER:=4.14
|
||||
|
||||
|
|
|
|||
|
|
@ -79,4 +79,23 @@ TARGET_DEVICES += hiveap-330
|
|||
|
||||
endif
|
||||
|
||||
ifeq ($(SUBTARGET),p2020)
|
||||
|
||||
define Device/p2020rdb
|
||||
DEVICE_TITLE := Freescale P2020RDB
|
||||
DEVICE_DTS_DIR := $(DTS_DIR)/fsl
|
||||
DEVICE_PACKAGES := kmod-hwmon-core kmod-hwmon-lm90 kmod-rtc-ds1307 \
|
||||
kmod-gpio-pca953x kmod-eeprom-at24
|
||||
BLOCKSIZE := 128k
|
||||
KERNEL := kernel-bin | gzip | \
|
||||
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
||||
SUPPORTED_DEVICES := fsl,P2020RDB
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
||||
pad-rootfs $$(BLOCKSIZE) | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += p2020rdb
|
||||
|
||||
endif
|
||||
|
||||
$(eval $(call BuildImage))
|
||||
|
|
|
|||
|
|
@ -0,0 +1,31 @@
|
|||
CONFIG_ARCH_HAS_TICK_BROADCAST=y
|
||||
CONFIG_CPU_RMAP=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
|
||||
CONFIG_GENERIC_IRQ_MIGRATION=y
|
||||
CONFIG_GENERIC_TBSYNC=y
|
||||
CONFIG_HAVE_RCU_TABLE_FREE=y
|
||||
CONFIG_LOCK_SPIN_ON_OWNER=y
|
||||
CONFIG_MPC85xx_RDB=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_BCH=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_ECC_BCH=y
|
||||
CONFIG_MTD_NAND_FSL_ELBC=y
|
||||
CONFIG_MTD_SPLIT_FIRMWARE=y
|
||||
CONFIG_MTD_SPLIT_FIT_FW=y
|
||||
CONFIG_MUTEX_SPIN_ON_OWNER=y
|
||||
CONFIG_NET_FLOW_LIMIT=y
|
||||
CONFIG_NR_CPUS=2
|
||||
CONFIG_PADATA=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_PPC_MSI_BITMAP=y
|
||||
CONFIG_RCU_NEED_SEGCBLIST=y
|
||||
CONFIG_RCU_STALL_COMMON=y
|
||||
CONFIG_RFS_ACCEL=y
|
||||
CONFIG_RPS=y
|
||||
CONFIG_RWSEM_SPIN_ON_OWNER=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_TREE_RCU=y
|
||||
CONFIG_TREE_SRCU=y
|
||||
CONFIG_XPS=y
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
|
||||
define Profile/Default
|
||||
NAME:=Default Profile
|
||||
PRIORITY:=1
|
||||
endef
|
||||
|
||||
define Profile/Default/Description
|
||||
Default package set compatible with most P2020 boards.
|
||||
endef
|
||||
|
||||
$(eval $(call Profile,Default))
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
BOARDNAME:=P2020
|
||||
|
||||
define Target/Description
|
||||
Build firmware images for Freescale P2020 based boards.
|
||||
endef
|
||||
|
|
@ -0,0 +1,170 @@
|
|||
From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001
|
||||
From: Pawel Dembicki <paweldembicki@gmail.com>
|
||||
Date: Sun, 30 Dec 2018 23:24:41 +0100
|
||||
Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT
|
||||
|
||||
This patch apply chages for OpenWRT in P2020RDB
|
||||
dts file.
|
||||
|
||||
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
|
||||
---
|
||||
arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++---------
|
||||
1 file changed, 63 insertions(+), 35 deletions(-)
|
||||
|
||||
--- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
|
||||
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
|
||||
@@ -2,6 +2,7 @@
|
||||
* P2020 RDB Device Tree Source
|
||||
*
|
||||
* Copyright 2009-2012 Freescale Semiconductor Inc.
|
||||
+ * Copyright 2018 Pawel Dembicki <paweldembicki@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
@@ -9,10 +10,15 @@
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
+/dts-v1/;
|
||||
+
|
||||
/include/ "p2020si-pre.dtsi"
|
||||
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+#include <dt-bindings/input/input.h>
|
||||
+
|
||||
/ {
|
||||
- model = "fsl,P2020RDB";
|
||||
+ model = "Freescale P2020RDB";
|
||||
compatible = "fsl,P2020RDB";
|
||||
|
||||
aliases {
|
||||
@@ -38,48 +44,38 @@
|
||||
0x2 0x0 0x0 0xffb00000 0x00020000>;
|
||||
|
||||
nor@0,0 {
|
||||
- #address-cells = <1>;
|
||||
- #size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <0x0 0x0 0x1000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <1>;
|
||||
|
||||
- partition@0 {
|
||||
- /* This location must not be altered */
|
||||
- /* 256KB for Vitesse 7385 Switch firmware */
|
||||
- reg = <0x0 0x00040000>;
|
||||
- label = "NOR (RO) Vitesse-7385 Firmware";
|
||||
- read-only;
|
||||
- };
|
||||
-
|
||||
- partition@40000 {
|
||||
- /* 256KB for DTB Image */
|
||||
- reg = <0x00040000 0x00040000>;
|
||||
- label = "NOR (RO) DTB Image";
|
||||
- read-only;
|
||||
- };
|
||||
+ partitions {
|
||||
+ compatible = "fixed-partitions";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
|
||||
- partition@80000 {
|
||||
- /* 3.5 MB for Linux Kernel Image */
|
||||
- reg = <0x00080000 0x00380000>;
|
||||
- label = "NOR (RO) Linux Kernel Image";
|
||||
- read-only;
|
||||
- };
|
||||
+ partition@0 {
|
||||
+ /* This location must not be altered */
|
||||
+ /* 256KB for Vitesse 7385 Switch firmware */
|
||||
+ reg = <0x0 0x00040000>;
|
||||
+ label = "NOR (RO) Vitesse-7385 Firmware";
|
||||
+ read-only;
|
||||
+ };
|
||||
|
||||
- partition@400000 {
|
||||
- /* 11MB for JFFS2 based Root file System */
|
||||
- reg = <0x00400000 0x00b00000>;
|
||||
- label = "NOR (RW) JFFS2 Root File System";
|
||||
- };
|
||||
+ partition@40000 {
|
||||
+ compatible = "denx,fit";
|
||||
+ reg = <0x00040000 0x00ec0000>;
|
||||
+ label = "firmware";
|
||||
+ };
|
||||
|
||||
- partition@f00000 {
|
||||
- /* This location must not be altered */
|
||||
- /* 512KB for u-boot Bootloader Image */
|
||||
- /* 512KB for u-boot Environment Variables */
|
||||
- reg = <0x00f00000 0x00100000>;
|
||||
- label = "NOR (RO) U-Boot Image";
|
||||
- read-only;
|
||||
+ partition@f00000 {
|
||||
+ /* This location must not be altered */
|
||||
+ /* 512KB for u-boot Bootloader Image */
|
||||
+ /* 512KB for u-boot Environment Variables */
|
||||
+ reg = <0x00f00000 0x00100000>;
|
||||
+ label = "u-boot";
|
||||
+ read-only;
|
||||
+ };
|
||||
};
|
||||
};
|
||||
|
||||
@@ -144,13 +140,43 @@
|
||||
soc: soc@ffe00000 {
|
||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||
|
||||
+ gpio0: gpio-controller@fc00 {
|
||||
+ };
|
||||
+
|
||||
i2c@3000 {
|
||||
+ temperature-sensor@4c {
|
||||
+ compatible = "adi,adt7461";
|
||||
+ reg = <0x4c>;
|
||||
+ };
|
||||
+
|
||||
+ eeprom@50 {
|
||||
+ compatible = "atmel,24c256";
|
||||
+ reg = <0x50>;
|
||||
+ };
|
||||
+
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1339";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
+ i2c@3100 {
|
||||
+ pmic@11 {
|
||||
+ compatible = "zl2006";
|
||||
+ reg = <0x11>;
|
||||
+ };
|
||||
+
|
||||
+ gpio@18 {
|
||||
+ compatible = "nxp,pca9557";
|
||||
+ reg = <0x18>;
|
||||
+ };
|
||||
+
|
||||
+ eeprom@52 {
|
||||
+ compatible = "atmel,24c01";
|
||||
+ reg = <0x52>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
spi@7000 {
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
@@ -204,10 +230,12 @@
|
||||
phy0: ethernet-phy@0 {
|
||||
interrupts = <3 1 0 0>;
|
||||
reg = <0x0>;
|
||||
+ reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
phy1: ethernet-phy@1 {
|
||||
interrupts = <3 1 0 0>;
|
||||
reg = <0x1>;
|
||||
+ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
tbi-phy@2 {
|
||||
device_type = "tbi-phy";
|
||||
|
|
@ -0,0 +1,170 @@
|
|||
From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001
|
||||
From: Pawel Dembicki <paweldembicki@gmail.com>
|
||||
Date: Sun, 30 Dec 2018 23:24:41 +0100
|
||||
Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT
|
||||
|
||||
This patch apply chages for OpenWRT in P2020RDB
|
||||
dts file.
|
||||
|
||||
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
|
||||
---
|
||||
arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++---------
|
||||
1 file changed, 63 insertions(+), 35 deletions(-)
|
||||
|
||||
--- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
|
||||
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
|
||||
@@ -2,6 +2,7 @@
|
||||
* P2020 RDB Device Tree Source
|
||||
*
|
||||
* Copyright 2009-2012 Freescale Semiconductor Inc.
|
||||
+ * Copyright 2018 Pawel Dembicki <paweldembicki@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
@@ -9,10 +10,15 @@
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
+/dts-v1/;
|
||||
+
|
||||
/include/ "p2020si-pre.dtsi"
|
||||
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+#include <dt-bindings/input/input.h>
|
||||
+
|
||||
/ {
|
||||
- model = "fsl,P2020RDB";
|
||||
+ model = "Freescale P2020RDB";
|
||||
compatible = "fsl,P2020RDB";
|
||||
|
||||
aliases {
|
||||
@@ -38,48 +44,38 @@
|
||||
0x2 0x0 0x0 0xffb00000 0x00020000>;
|
||||
|
||||
nor@0,0 {
|
||||
- #address-cells = <1>;
|
||||
- #size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <0x0 0x0 0x1000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <1>;
|
||||
|
||||
- partition@0 {
|
||||
- /* This location must not be altered */
|
||||
- /* 256KB for Vitesse 7385 Switch firmware */
|
||||
- reg = <0x0 0x00040000>;
|
||||
- label = "NOR (RO) Vitesse-7385 Firmware";
|
||||
- read-only;
|
||||
- };
|
||||
-
|
||||
- partition@40000 {
|
||||
- /* 256KB for DTB Image */
|
||||
- reg = <0x00040000 0x00040000>;
|
||||
- label = "NOR (RO) DTB Image";
|
||||
- read-only;
|
||||
- };
|
||||
+ partitions {
|
||||
+ compatible = "fixed-partitions";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
|
||||
- partition@80000 {
|
||||
- /* 3.5 MB for Linux Kernel Image */
|
||||
- reg = <0x00080000 0x00380000>;
|
||||
- label = "NOR (RO) Linux Kernel Image";
|
||||
- read-only;
|
||||
- };
|
||||
+ partition@0 {
|
||||
+ /* This location must not be altered */
|
||||
+ /* 256KB for Vitesse 7385 Switch firmware */
|
||||
+ reg = <0x0 0x00040000>;
|
||||
+ label = "NOR (RO) Vitesse-7385 Firmware";
|
||||
+ read-only;
|
||||
+ };
|
||||
|
||||
- partition@400000 {
|
||||
- /* 11MB for JFFS2 based Root file System */
|
||||
- reg = <0x00400000 0x00b00000>;
|
||||
- label = "NOR (RW) JFFS2 Root File System";
|
||||
- };
|
||||
+ partition@40000 {
|
||||
+ compatible = "denx,fit";
|
||||
+ reg = <0x00040000 0x00ec0000>;
|
||||
+ label = "firmware";
|
||||
+ };
|
||||
|
||||
- partition@f00000 {
|
||||
- /* This location must not be altered */
|
||||
- /* 512KB for u-boot Bootloader Image */
|
||||
- /* 512KB for u-boot Environment Variables */
|
||||
- reg = <0x00f00000 0x00100000>;
|
||||
- label = "NOR (RO) U-Boot Image";
|
||||
- read-only;
|
||||
+ partition@f00000 {
|
||||
+ /* This location must not be altered */
|
||||
+ /* 512KB for u-boot Bootloader Image */
|
||||
+ /* 512KB for u-boot Environment Variables */
|
||||
+ reg = <0x00f00000 0x00100000>;
|
||||
+ label = "u-boot";
|
||||
+ read-only;
|
||||
+ };
|
||||
};
|
||||
};
|
||||
|
||||
@@ -144,13 +140,43 @@
|
||||
soc: soc@ffe00000 {
|
||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||
|
||||
+ gpio0: gpio-controller@fc00 {
|
||||
+ };
|
||||
+
|
||||
i2c@3000 {
|
||||
+ temperature-sensor@4c {
|
||||
+ compatible = "adi,adt7461";
|
||||
+ reg = <0x4c>;
|
||||
+ };
|
||||
+
|
||||
+ eeprom@50 {
|
||||
+ compatible = "atmel,24c256";
|
||||
+ reg = <0x50>;
|
||||
+ };
|
||||
+
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1339";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
+ i2c@3100 {
|
||||
+ pmic@11 {
|
||||
+ compatible = "zl2006";
|
||||
+ reg = <0x11>;
|
||||
+ };
|
||||
+
|
||||
+ gpio@18 {
|
||||
+ compatible = "nxp,pca9557";
|
||||
+ reg = <0x18>;
|
||||
+ };
|
||||
+
|
||||
+ eeprom@52 {
|
||||
+ compatible = "atmel,24c01";
|
||||
+ reg = <0x52>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
spi@7000 {
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
@@ -204,10 +230,12 @@
|
||||
phy0: ethernet-phy@0 {
|
||||
interrupts = <3 1 0 0>;
|
||||
reg = <0x0>;
|
||||
+ reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
phy1: ethernet-phy@1 {
|
||||
interrupts = <3 1 0 0>;
|
||||
reg = <0x1>;
|
||||
+ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
tbi-phy@2 {
|
||||
device_type = "tbi-phy";
|
||||
Loading…
Reference in New Issue