hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ath79: add support for the TP-LINK WBS510 V2 

This adds support for a popular low-cost 5GHz N based AP

Specifications:
 - SoC: Atheros AR9344
 - RAM: 64MB
 - Storage: 8 MB SPI NOR
 - Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power
 - Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
master
Andrew Cameron 2019-11-06 20:12:55 -06:00 committed by Adrian Schmutzler
parent d3a8a62692
commit 5b8709d9f2
6 changed files with 62 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts Normal file
View File

@ -0,0 +1,13 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9344_tplink_cpexxx-v1.dtsi"
/ {
compatible = "tplink,wbs510-v2", "qca,ar9344";
model = "TP-Link WBS510 v2";
};
&led_link4 {
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};

3
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@ -175,7 +175,8 @@ tplink,cpe210-v1|\
tplink,cpe220-v2|\
tplink,cpe220-v3|\
tplink,cpe510-v1|\
tplink,wbs210-v2)
tplink,wbs210-v2|\
tplink,wbs510-v2)
ucidef_set_led_netdev "lan0" "LAN0" "tp-link:green:lan0" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
ucidef_set_rssimon "wlan0" "200000" "1"

1
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@ -92,6 +92,7 @@ ath79_setup_interfaces()
tplink,cpe220-v3|\
tplink,cpe510-v1|\
tplink,wbs210-v2|\
tplink,wbs510-v2|\
ubnt,nanostation-m|\
ubnt,routerstation)
ucidef_set_interfaces_lan_wan "eth1" "eth0"

3
target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
View File

@ -46,7 +46,8 @@ tplink,cpe210-v1|\
tplink,cpe220-v2|\
tplink,cpe220-v3|\
tplink,cpe510-v1|\
tplink,wbs210-v2)
tplink,wbs210-v2|\
tplink,wbs510-v2)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
;;
ubnt,nanostation-ac)

11
target/linux/ath79/image/generic-tp-link.mk
View File

@ -548,3 +548,14 @@ define Device/tplink_wbs210-v2
TPLINK_BOARD_ID := WBS210V2
endef
TARGET_DEVICES += tplink_wbs210-v2
define Device/tplink_wbs510-v2
$(Device/tplink-loader-okli)
ATH_SOC := ar9344
IMAGE_SIZE := 7680k
DEVICE_MODEL := WBS510
DEVICE_VARIANT := v2
DEVICE_PACKAGES := rssileds
TPLINK_BOARD_ID := WBS510V2
endef
TARGET_DEVICES += tplink_wbs510-v2

33
tools/firmware-utils/src/tplink-safeloader.c
View File

@ -570,6 +570,39 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "support-list",
},
{
.id = "WBS510V2",
.vendor = "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
.support_list =
"SupportList:\r\n"
"WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
"WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
"WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
"WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
.support_trail = '\xff',
.soft_ver = NULL,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"partition-table", 0x20000, 0x02000},
{"default-mac", 0x30000, 0x00020},
{"product-info", 0x31100, 0x00100},
{"signature", 0x32000, 0x00400},
{"os-image", 0x40000, 0x200000},
{"file-system", 0x240000, 0x570000},
{"soft-version", 0x7b0000, 0x00100},
{"support-list", 0x7b1000, 0x00400},
{"user-config", 0x7c0000, 0x10000},
{"default-config", 0x7d0000, 0x10000},
{"log", 0x7e0000, 0x10000},
{"radio", 0x7f0000, 0x10000},
{NULL, 0, 0}
},
.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "support-list",
},
/** Firmware layout for the C2600 */
{
.id = "C2600",