ar71xx: add preliminary support for the Netgear WNDR3700

Based on patches by Marco Porsch from:
https://forum.openwrt.org/viewtopic.php?id=22311

SVN-Revision: 18411
lede-17.01
Gabor Juhos 2009-11-13 17:11:29 +00:00
parent e6a40cac9a
commit 5ab66428b0
10 changed files with 163 additions and 0 deletions

View File

@ -67,6 +67,9 @@ ar71xx_board_name() {
*WP543)
name="wp543"
;;
*WNDR3700)
name"wndr3700"
;;
*WNR2000)
name="wnr2000"
;;

View File

@ -17,6 +17,7 @@ CONFIG_AR71XX_MACH_TEW_632BRP=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_TL_WR941ND=y
CONFIG_AR71XX_MACH_UBNT=y
CONFIG_AR71XX_MACH_WNDR3700=y
CONFIG_AR71XX_MACH_WNR2000=y
CONFIG_AR71XX_MACH_WP543=y
CONFIG_AR71XX_MACH_WRT160NL=y

View File

@ -16,6 +16,7 @@ CONFIG_AR71XX_MACH_TEW_632BRP=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_TL_WR941ND=y
CONFIG_AR71XX_MACH_UBNT=y
CONFIG_AR71XX_MACH_WNDR3700=y
CONFIG_AR71XX_MACH_WNR2000=y
CONFIG_AR71XX_MACH_WP543=y
CONFIG_AR71XX_MACH_WRT160NL=y

View File

@ -17,6 +17,7 @@ CONFIG_AR71XX_MACH_TEW_632BRP=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_TL_WR941ND=y
CONFIG_AR71XX_MACH_UBNT=y
CONFIG_AR71XX_MACH_WNDR3700=y
CONFIG_AR71XX_MACH_WNR2000=y
CONFIG_AR71XX_MACH_WP543=y
CONFIG_AR71XX_MACH_WRT160NL=y

View File

@ -43,6 +43,10 @@ config AR71XX_MACH_RB_4XX
bool "MikroTik RouterBOARD 4xx series support"
default y
config AR71XX_MACH_WNDR3700
bool "NETGEAR WNDR3700 board support"
default y
config AR71XX_MACH_WNR2000
bool "NETGEAR WNR2000 board support"
default y

View File

@ -26,6 +26,7 @@ obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o
obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o
obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o
obj-$(CONFIG_AR71XX_MACH_UBNT) += mach-ubnt.o
obj-$(CONFIG_AR71XX_MACH_WNDR3700) += mach-wndr3700.o
obj-$(CONFIG_AR71XX_MACH_WNR2000) += mach-wnr2000.o
obj-$(CONFIG_AR71XX_MACH_WP543) += mach-wp543.o
obj-$(CONFIG_AR71XX_MACH_WRT160NL) += mach-wrt160nl.o

View File

@ -0,0 +1,131 @@
/*
* Netgear WNDR3700 board support
*
* Copyright (C) 2009 Marco Porsch
* Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include <asm/mach-ar71xx/pci.h>
#include "devices.h"
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition wndr3700_partitions[] = {
{
.name = "uboot",
.offset = 0,
.size = 0x050000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "env",
.offset = 0x050000,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "rootfs",
.offset = 0x070000,
.size = 0x720000,
} , {
.name = "config",
.offset = 0x790000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "config_bak",
.offset = 0x7a0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "pot",
.offset = 0x7b0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "traffic_meter",
.offset = 0x7c0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "language",
.offset = 0x7d0000,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "caldata",
.offset = 0x7f0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data wndr3700_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.parts = wndr3700_partitions,
.nr_parts = ARRAY_SIZE(wndr3700_partitions),
#endif
};
static struct ar71xx_pci_irq wndr3700_pci_irqs[] __initdata = {
{
.slot = 0,
.pin = 1,
.irq = AR71XX_PCI_IRQ_DEV0,
}, {
.slot = 1,
.pin = 1,
.irq = AR71XX_PCI_IRQ_DEV1,
}
};
static struct spi_board_info wndr3700_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p80",
.platform_data = &wndr3700_flash_data,
}
};
static void __init wndr3700_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
ar71xx_set_mac_base(mac);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.phy_mask = 0xf;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_usb();
ar71xx_pci_init(ARRAY_SIZE(wndr3700_pci_irqs), wndr3700_pci_irqs);
ar71xx_add_device_spi(NULL, wndr3700_spi_info,
ARRAY_SIZE(wndr3700_spi_info));
/* TODO: LEDs, buttons support */
}
MIPS_MACHINE(AR71XX_MACH_WNDR3700, "NETGEAR WNDR3700", wndr3700_setup);

View File

@ -85,6 +85,9 @@ static struct board_rec boards[] __initdata = {
}, {
.name = "UBNT-BM",
.mach_type = AR71XX_MACH_UBNT_BULLET_M,
}, {
.name = "WNDR3700",
.mach_type = AR71XX_MACH_WNDR3700,
}, {
.name = "WNR2000",
.mach_type = AR71XX_MACH_WNR2000,

View File

@ -142,6 +142,7 @@ enum ar71xx_mach_type {
AR71XX_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
AR71XX_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
AR71XX_MACH_WNR2000, /* NETGEAR WNR2000 */
AR71XX_MACH_WNDR3700, /* NETGEAR WNDR3700 */
AR71XX_MACH_WP543, /* Compex WP543 */
AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */
AR71XX_MACH_WRT400N, /* Linksys WRT400N */

View File

@ -0,0 +1,17 @@
#
# Copyright (C) 2009 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/WNDR3700
NAME:=NETGEAR WNDR3700
PACKAGES:=kmod-ath9k hostapd-mini kmod-usb-core kmod-usb-ohci kmod-usb2
endef
define Profile/WNDR3700/Description
Package set optimized for the NETGEAR WNDR3700
endef
$(eval $(call Profile,WNDR3700))