hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ipq806x: fixes for R7800 and C2600 

Updating spi pins configuration in R7800 and C2600 DTs
Adding more usb power pin export and gsbi6 in R7800 DT
Updating and fixing leds

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
lede-17.01
Pavel Kubelun 2016-11-08 08:49:07 +03:00 committed by John Crispin
parent 3ac5eb9141
commit 5aace5a5fb
4 changed files with 115 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
target/linux/ipq806x/base-files/etc/board.d/01_leds
View File

@ -15,7 +15,7 @@ c2600)
ucidef_set_led_usbport "usb1" "USB 1" "${board}:white:usb_2" "usb1-port1" "usb2-port1"
ucidef_set_led_usbport "usb2" "USB 2" "${board}:white:usb_4" "usb3-port1" "usb4-port1"
ucidef_set_led_netdev "wan" "WAN" "${board}:white:wan" "eth0"
ucidef_set_led_netdev "lan" "LAN" "${board}:white:lan" "br-lan"
ucidef_set_led_netdev "lan" "LAN" "${board}:white:lan" "eth1"
ucidef_set_led_default "general" "general" "${board}:white:ledgnr" "1"
;;
d7800 |\
@ -29,8 +29,8 @@ r7500v2)
ucidef_set_led_default "rfkill" "rfkill" "${board}:white:rfkill" "0"
;;
r7800)
ucidef_set_led_usbdev "usb1" "USB 1" "${board}:white:usb1" "2-1"
ucidef_set_led_usbdev "usb2" "USB 2" "${board}:white:usb2" "4-1"
ucidef_set_led_usbport "usb1" "USB 1" "${board}:white:usb1" "usb1-port1" "usb2-port1"
ucidef_set_led_usbport "usb2" "USB 2" "${board}:white:usb2" "usb3-port1" "usb4-port1"
ucidef_set_led_netdev "wan" "WAN" "${board}:white:wan" "eth0"
ucidef_set_led_ide "esata" "eSATA" "${board}:white:esata"
ucidef_set_led_wlan "wps" "WPS" "${board}:white:wps" "phy0tpt"

28
target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
View File

@ -46,8 +46,23 @@
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
bias-none;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
@ -114,7 +129,7 @@
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi4: spi@1a280000 {
spi5: spi@1a280000 {
status = "ok";
spi-max-frequency = <50000000>;
@ -124,7 +139,7 @@
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash: m25p80@0 {
compatible = "s25fl256s1";
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
@ -380,7 +395,7 @@
wifi {
label = "wifi";
gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WLAN>;
linux,code = <KEY_RFKILL>;
};
reset {
@ -425,6 +440,11 @@
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_red {
label = "c2600:red:wan";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
};
wan_blue {
label = "c2600:white:wan";
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;

93
target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
View File

@ -110,15 +110,61 @@
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
bias-none;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
spi6_pins: spi6_pins {
mux {
pins = "gpio55", "gpio56", "gpio58";
function = "gsbi6";
bias-pull-down;
};
mosi {
pins = "gpio55";
drive-strength = <12>;
};
miso {
pins = "gpio56";
drive-strength = <14>;
};
cs {
pins = "gpio57";
drive-strength = <12>;
bias-pull-up;
};
clk {
pins = "gpio58";
drive-strength = <12>;
};
reset {
pins = "gpio33";
drive-strength = <10>;
bias-pull-down;
output-high;
};
};
};
gsbi@16300000 {
@ -139,7 +185,7 @@
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi4: spi@1a280000 {
spi5: spi@1a280000 {
status = "ok";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
@ -148,10 +194,10 @@
cs-gpios = <&qcom_pinmux 20 0>;
flash: m25p80@0 {
compatible = "s25fl512s";
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <51200000>;
spi-max-frequency = <50000000>;
reg = <0>;
linux,part-probe = "qcom-smem";
@ -159,6 +205,25 @@
};
};
gsbi6: gsbi@16500000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi6: spi@16580000 {
status = "ok";
spi-max-frequency = <6000000>;
pinctrl-0 = <&spi6_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 57 0>;
spi-nor@0 {
compatible = "spi-nor";
reg = <0>;
spi-max-frequency = <6000000>;
};
};
};
sata-phy@1b400000 {
status = "ok";
};
@ -375,18 +440,24 @@
label = "wifi";
gpios = <&qcom_pinmux 6 1>;
linux,code = <KEY_RFKILL>;
debounce-interval = <60>;
wakeup-source;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 1>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
};
@ -449,17 +520,23 @@
compatible = "gpio-export";
#size-cells = <0>;
display_data {
gpio-export,name = "usb0";
usb1-power {
gpio-export,name = "usb1";
gpio-export,output = <1>;
gpios = <&qcom_pinmux 15 0>;
};
display_clock {
gpio-export,name = "usb1";
usb2-power {
gpio-export,name = "usb2";
gpio-export,output = <1>;
gpios = <&qcom_pinmux 16 0>;
};
usb-power {
gpio-export,name = "usb_p";
gpio-export,output = <1>;
gpios = <&qcom_pinmux 68 0>;
};
};
};

6
target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
View File

@ -29,7 +29,7 @@
qcom,saw = <&saw0>;
clocks = <&kraitcc 0>, <&kraitcc 4>;
clock-names = "cpu", "l2";
qcom,imem = <&imem>;
qcom,imem = <&qfprom>;
clock-latency = <100000>;
cpu-supply = <&smb208_s2a>;
voltage-tolerance = <5>;
@ -49,7 +49,7 @@
qcom,saw = <&saw1>;
clocks = <&kraitcc 1>, <&kraitcc 4>;
clock-names = "cpu", "l2";
qcom,imem = <&imem>;
qcom,imem = <&qfprom>;
clock-latency = <100000>;
cpu-supply = <&smb208_s2b>;
cooling-min-state = <0>;
@ -200,7 +200,7 @@
reg-names = "lpass-lpaif";
};
imem: memory@700000 {
qfprom: qfprom@700000 {
compatible = "qcom,qfprom", "syscon";
reg = <0x00700000 0x1000>;
#address-cells = <1>;