From 57c5910535ebf5fbee20213ddaf67da118629cb9 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Mon, 14 Sep 2015 20:09:31 +0000 Subject: [PATCH] ramips: Added WIZnet WizFi630A Platform based on Ralink RT5350 This patch is to add the WIZnet WizFi630A board as a new platform. The board is in mini pci express form factor. Signed-off-by: Tobias Welz SVN-Revision: 46921 --- .../ramips/base-files/etc/board.d/02_network | 10 + target/linux/ramips/base-files/etc/diag.sh | 3 + target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/WIZFI630A.dts | 180 ++++++++++++++++++ target/linux/ramips/image/Makefile | 4 +- target/linux/ramips/rt305x/profiles/wiznet.mk | 17 ++ 7 files changed, 217 insertions(+), 1 deletion(-) create mode 100644 target/linux/ramips/dts/WIZFI630A.dts create mode 100644 target/linux/ramips/rt305x/profiles/wiznet.mk diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 02cd6824d0..75cccae0fb 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -218,6 +218,12 @@ ramips_setup_interfaces() ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t" ucidef_add_switch_vlan "switch0" "2" "5 6t" ;; + wizfi630a) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "1 2 6t" + ucidef_add_switch_vlan "switch0" "2" "0 6t" + ;; y1s) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" @@ -328,6 +334,10 @@ ramips_setup_macs() wan_mac=$(mtd_get_mac_binary factory 4) lan_mac=$wan_mac ;; + wizfi630a) + lan_mac=$(mtd_get_mac_binary factory 4) + wan_mac=$(mtd_get_mac_binary factory 40) + ;; wsr-1166) local index="$(find_mtd_index "board_data")" wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)" diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index f886b5da8a..7fc6f29727 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -166,6 +166,9 @@ get_status_led() { wzr-agl300nh) status_led="$board:green:router" ;; + wizfi630a) + status_led="$board::run" + ;; wsr-1166|\ wsr-600) status_led="$board:orange:diag" diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 5b6808e0b3..d242235564 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -370,6 +370,9 @@ ramips_board_detect() { *"WIZARD 8800") name="wizard8800" ;; + *"WizFi630A") + name="wizfi630a" + ;; *"WL-330N") name="wl-330n" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 844ed5db95..2f6c6246ab 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -108,6 +108,7 @@ platform_check_image() { whr-300hp2|\ whr-600d|\ whr-g300n|\ + wizfi630a|\ wl-330n|\ wl-330n3g|\ wl-341v3|\ diff --git a/target/linux/ramips/dts/WIZFI630A.dts b/target/linux/ramips/dts/WIZFI630A.dts new file mode 100644 index 0000000000..f2818ce9df --- /dev/null +++ b/target/linux/ramips/dts/WIZFI630A.dts @@ -0,0 +1,180 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "wizfi630a", "ralink,rt5350-soc"; + model = "WIZnet WizFi630A"; + + chosen { + bootargs = "console=ttyS1,115200"; + }; + + palmbus@10000000 { + gpio1: gpio@660 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q128"; + reg = <0>; + linux,modalias = "m25p80", "w25q128"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; + + uart@500 { + compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0x500 0x100>; + resets = <&rstctrl 12>; + reset-names = "uart"; + interrupt-parent = <&intc>; + interrupts = <5>; + reg-shift = <2>; + status = "okay"; + }; + + uartlite@c00 { + compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + resets = <&rstctrl 19>; + reset-names = "uartl"; + interrupt-parent = <&intc>; + interrupts = <12>; + reg-shift = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&uartlite_pins>; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag" ; + ralink,function = "gpio"; + }; + }; + + uartf_gpio_pins: uartf_gpio { + uartf_gpio { + ralink,group = "uartf"; + ralink,function = "uartf"; + }; + }; + + uartlite_pins: uartlite { + uart { + ralink,group = "uartlite"; + ralink,function = "uartlite"; + }; + }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + }; + + esw@10110000 { + ralink,portmap = <0x17>; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + gpio-export { + compatible = "gpio-export"; + #size-cells = <0>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + run { + label = "wizfi630a::run"; + gpios = <&gpio0 1 1>; + }; + + wps { + label = "wizfi630a::wps"; + gpios = <&gpio0 20 1>; + }; + + uart1 { + label = "wizfi630a::uart1"; + gpios = <&gpio0 18 1>; + }; + + uart2 { + label = "wizfi630a::uart2"; + gpios = <&gpio0 21 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 17 1>; + linux,code = <0x198>; + }; + + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + + scm1 { + label = "SCM1"; + gpios = <&gpio0 19 1>; + linux,code = <0x100>; + }; + + scm2 { + label = "SCM2"; + gpios = <&gpio0 2 1>; + linux,code = <0x101>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 4632ad2cd3..c24d220032 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -608,7 +608,6 @@ Image/Build/Profile/W502U=$(call BuildFirmware/Default8M/$(1),$(1),w502u,W502U) Image/Build/Profile/WCR150GN=$(call BuildFirmware/Default4M/$(1),$(1),wcr150gn,WCR150GN) - Image/Build/Profile/MZK-DP150N=$(call BuildFirmware/Default4M/$(1),$(1),mzk-dp150n,MZK-DP150N) buffalo_whrg300n_mtd_size=3801088 @@ -631,6 +630,8 @@ Image/Build/Profile/WHRG300N=$(call BuildFirmware/WHRG300N/$(1),$(1)) Image/Build/Profile/WIZARD8800=$(call BuildFirmware/Default8M/$(1),$(1),wizard-8800,WIZARD8800,Linux Kernel Image) +Image/Build/Profile/WIZFI630A=$(call BuildFirmware/Default16M/$(1),$(1),wizfi630a,WIZFI630A) + Image/Build/Profile/WL-330N=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n,WL-330N) Image/Build/Profile/WL-330N3G=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n3g,WL-330N3G) @@ -763,6 +764,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/WCR150GN,$(1)) $(call Image/Build/Profile/WHRG300N,$(1)) $(call Image/Build/Profile/WIZARD8800,$(1)) + $(call Image/Build/Profile/WIZFI630A,$(1)) $(call Image/Build/Profile/WL-330N,$(1)) $(call Image/Build/Profile/WL-330N3G,$(1)) $(call Image/Build/Profile/WL-341V3,$(1)) diff --git a/target/linux/ramips/rt305x/profiles/wiznet.mk b/target/linux/ramips/rt305x/profiles/wiznet.mk new file mode 100644 index 0000000000..f8e8324289 --- /dev/null +++ b/target/linux/ramips/rt305x/profiles/wiznet.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2015 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/WIZFI630A + NAME:=WIZnet WizFi630A + PACKAGES:=\ + kmod-usb2 +endef + +define Profile/WIZFI630A/Description + Package set for WIZnet WizFi630A board +endef +$(eval $(call Profile,WIZFI630A))