diff --git a/openwrt/target/linux/brcm63xx-2.6/Makefile b/openwrt/target/linux/brcm63xx-2.6/Makefile index ebbb84425a..a27147491a 100644 --- a/openwrt/target/linux/brcm63xx-2.6/Makefile +++ b/openwrt/target/linux/brcm63xx-2.6/Makefile @@ -6,9 +6,9 @@ # include $(TOPDIR)/rules.mk -LINUX_VERSION:=2.6.8.1 +LINUX_VERSION:=2.6.16.7 LINUX_RELEASE:=1 -LINUX_KERNEL_MD5SUM:=9517ca999e822b898fbdc7e72796b1aa +LINUX_KERNEL_MD5SUM:=9682b2bd6e02f3087982d7c3f5ba824e include ./config include $(INCLUDE_DIR)/kernel.mk @@ -19,6 +19,5 @@ $(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked #[ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE) [ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE) @$(CP) config $(LINUX_DIR)/.config - @$(CP) ./files/built-in.o $(LINUX_DIR)/bcmdrivers/broadcom/ touch $@ diff --git a/openwrt/target/linux/brcm63xx-2.6/config b/openwrt/target/linux/brcm63xx-2.6/config index f774cfc276..335bd645f9 100644 --- a/openwrt/target/linux/brcm63xx-2.6/config +++ b/openwrt/target/linux/brcm63xx-2.6/config @@ -1,77 +1,90 @@ # # Automatically generated make config: don't edit +# Linux kernel version: 2.6.16.7 +# Fri Jul 7 21:47:39 2006 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set -# CONFIG_64BIT is not set -CONFIG_MIPS32=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_HOTPLUG=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y # # Machine selection # CONFIG_MIPS_BRCM=y +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MIPS_EV64120 is not set +# CONFIG_MIPS_EV96100 is not set +# CONFIG_MIPS_IVR is not set +# CONFIG_MIPS_ITE8172 is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_3 is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_OCELOT_G is not set +# CONFIG_MIPS_XXS1500 is not set +# CONFIG_PNX8550_V2PCI is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_DDB5074 is not set +# CONFIG_DDB5476 is not set +# CONFIG_DDB5477 is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_QEMU is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_PTSWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SNI_RM200_PCI is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_TOSHIBA_RBTX4938 is not set # CONFIG_BCM96338 is not set # CONFIG_BCM96345 is not set CONFIG_BCM96348=y -CONFIG_BCM_BOARD=y +# CONFIG_BCM_BOARD is not set CONFIG_BCM_SERIAL=y -CONFIG_BCM_ENET=y -CONFIG_BCM_USB=m -CONFIG_BCM_WLAN=m -CONFIG_BCM_PCI=y -CONFIG_BCM_ATMAPI=y -CONFIG_BCM_ATMTEST=m -CONFIG_BCM_ADSL=y -CONFIG_BCM_ENDPOINT=m -CONFIG_BCM_PROCFS=m -CONFIG_BCM_VDSL=m -CONFIG_BCM_SECURITY=m -CONFIG_BCM_HPNA=m +# CONFIG_BCM_ENET is not set +# CONFIG_BCM_USB is not set +# CONFIG_BCM_WLAN is not set +# CONFIG_BCM_PCI is not set +# CONFIG_BCM_ATMAPI is not set +# CONFIG_BCM_ATMTEST is not set +# CONFIG_BCM_ADSL is not set +# CONFIG_BCM_ENDPOINT is not set +CONFIG_BCM_PROCFS=y +# CONFIG_BCM_VDSL is not set +# CONFIG_BCM_SECURITY is not set +# CONFIG_BCM_HPNA is not set CONFIG_BCM_BOARD_IMPL=1 CONFIG_BCM_SERIAL_IMPL=1 -CONFIG_BCM_ENET_IMPL=2 -CONFIG_BCM_USB_IMPL=2 +CONFIG_BCM_ENET_IMPL=1 +CONFIG_BCM_USB_IMPL=1 CONFIG_BCM_WLAN_IMPL=1 CONFIG_BCM_ATMAPI_IMPL=1 CONFIG_BCM_ATMTEST_IMPL=1 @@ -82,52 +95,28 @@ CONFIG_BCM_PROCFS_IMPL=1 CONFIG_BCM_VDSL_IMPL=1 CONFIG_BCM_SECURITY_IMPL=1 CONFIG_BCM_HPNA_IMPL=0 -# CONFIG_ROOTFS_SQUASHFS is not set -CONFIG_ROOTFS_CRAMFS=y +CONFIG_ROOTFS_SQUASHFS=y +# CONFIG_ROOTFS_CRAMFS is not set # CONFIG_ROOTFS_JFFS2 is not set # CONFIG_ROOTFS_NFS is not set -CONFIG_ROOT_FLASHFS="root=31:0 ro noinitrd" -# CONFIG_MACH_JAZZ is not set -# CONFIG_BAGET_MIPS is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_LASAT is not set -# CONFIG_MIPS_ITE8172 is not set -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_DDB5074 is not set -# CONFIG_DDB5476 is not set -# CONFIG_DDB5477 is not set -# CONFIG_NEC_OSPREY is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SOC_AU1X00 is not set -# CONFIG_SIBYTE_SB1xxx_SOC is not set -# CONFIG_SNI_RM200_PCI is not set -# CONFIG_TOSHIBA_RBTX4927 is not set +CONFIG_ROOT_FLASHFS="root=/dev/mtdblock2 rootfstype=cramfs,squashfs,jffs2 noinitrd console=ttyS0,115200" CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_HAVE_DEC_LOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_IRQ_CPU=y CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_FB is not set # # CPU selection # -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS64 is not set +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_VR41XX is not set @@ -143,37 +132,132 @@ CONFIG_CPU_MIPS32=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y -# CONFIG_VTAG_ICACHE is not set +# CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set # CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_SYSCTL=y +CONFIG_AUDIT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_LBD=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # -CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +CONFIG_HW_HAS_PCI=y +# CONFIG_PCI is not set CONFIG_MMU=y # -# PCMCIA/CardBus support +# PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCMCIA is not set +# CONFIG_PCCARD is not set # # PCI Hotplug Support # -# CONFIG_HOTPLUG_PCI is not set # # Executable file formats @@ -181,7 +265,79 @@ CONFIG_MMU=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_TRAD_SIGNALS=y -# CONFIG_BINFMT_IRIX is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -190,31 +346,39 @@ CONFIG_TRAD_SIGNALS=y # # Generic Driver Options # -# CONFIG_STANDALONE is not set +CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=3 +CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_CONCAT is not set CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # # User Modules And Translation Layers # -# CONFIG_MTD_CHAR is not set +CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -241,6 +405,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -248,16 +413,16 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_BCM963XX=y -# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # -# CONFIG_MTD_PMC551 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers @@ -271,6 +436,11 @@ CONFIG_MTD_BCM963XX=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -283,16 +453,13 @@ CONFIG_MTD_BCM963XX=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_LBD is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -302,6 +469,7 @@ CONFIG_MTD_BCM963XX=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -312,291 +480,61 @@ CONFIG_MTD_BCM963XX=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # # I2O device support # -# CONFIG_I2O is not set # -# Networking support +# Network device support # -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -CONFIG_IP_MROUTE=y -# CONFIG_IP_PIMSM_V1 is not set -# CONFIG_IP_PIMSM_V2 is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_BRIDGE_NETFILTER is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=y -CONFIG_IP_NF_FTP=y -CONFIG_IP_NF_H323=y -CONFIG_IP_NF_IRC=y -CONFIG_IP_NF_TFTP=y -# CONFIG_IP_NF_AMANDA is not set -# CONFIG_IP_NF_DTX8 is not set -CONFIG_IP_NF_WM=m -CONFIG_IP_NF_PT=m -CONFIG_IP_NF_IPSEC=m -# CONFIG_IP_NF_RTSP is not set -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=y -CONFIG_IP_NF_MATCH_LIMIT=y -CONFIG_IP_NF_MATCH_IPRANGE=y -CONFIG_IP_NF_MATCH_MAC=y -# CONFIG_IP_NF_MATCH_PKTTYPE is not set -CONFIG_IP_NF_MATCH_MARK=y -# CONFIG_IP_NF_MATCH_MULTIPORT is not set -# CONFIG_IP_NF_MATCH_TOS is not set -# CONFIG_IP_NF_MATCH_RECENT is not set -# CONFIG_IP_NF_MATCH_ECN is not set -# CONFIG_IP_NF_MATCH_DSCP is not set -# CONFIG_IP_NF_MATCH_AH_ESP is not set -# CONFIG_IP_NF_MATCH_LENGTH is not set -# CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_MATCH_TCPMSS is not set -# CONFIG_IP_NF_MATCH_HELPER is not set -CONFIG_IP_NF_MATCH_STATE=y -# CONFIG_IP_NF_MATCH_CONNTRACK is not set -# CONFIG_IP_NF_MATCH_OWNER is not set -CONFIG_IP_NF_FILTER=y -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_NAT=y -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=y -CONFIG_IP_NF_TARGET_REDIRECT=y -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_SAME is not set -CONFIG_IP_NF_NAT_LOCAL=y -# CONFIG_IP_NF_NAT_SNMP_BASIC is not set -CONFIG_IP_NF_NAT_IRC=y -CONFIG_IP_NF_NAT_FTP=y -CONFIG_IP_NF_NAT_H323=y -CONFIG_IP_NF_NAT_TFTP=y -CONFIG_IP_NF_NAT_IPSEC=m -CONFIG_IP_NF_MANGLE=y -# CONFIG_IP_NF_TARGET_TOS is not set -# CONFIG_IP_NF_TARGET_FTOS is not set -# CONFIG_IP_NF_TARGET_ECN is not set -# CONFIG_IP_NF_TARGET_DSCP is not set -CONFIG_IP_NF_TARGET_MARK=y -# CONFIG_IP_NF_TARGET_CLASSIFY is not set -CONFIG_IP_NF_TARGET_LOG=y -# CONFIG_IP_NF_TARGET_ULOG is not set -CONFIG_IP_NF_TARGET_TCPMSS=y -# CONFIG_IP_NF_ARPTABLES is not set -# CONFIG_IP_NF_RAW is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -# CONFIG_IP_NF_PPTP is not set - -# -# Bridge: Netfilter Configuration -# -# CONFIG_BRIDGE_NF_EBTABLES is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -CONFIG_ATM=y -CONFIG_ATM_CLIP=y -# CONFIG_ATM_CLIP_NO_ICMP is not set -# CONFIG_ATM_LANE is not set -CONFIG_ATM_BR2684=y -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_ATM_RT2684=y -CONFIG_BRIDGE=y -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_BCSP_TXCRC=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIVHCI=m CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set # -# ARCnet devices +# PHY device support # -# CONFIG_ARCNET is not set # # Ethernet (10 or 100Mbit) # -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set +# CONFIG_NET_ETHERNET is not set # # Ethernet (1000 Mbit) # -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set # # Ethernet (10000 Mbit) # -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set # # Token Ring devices # -# CONFIG_TR is not set # # Wireless LAN (non-hamradio) # -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -CONFIG_NET_WIRELESS=y +# CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set - -# -# ATM drivers -# -# CONFIG_ATM_TCP is not set -# CONFIG_ATM_LANAI is not set -# CONFIG_ATM_ENI is not set -# CONFIG_ATM_FIRESTREAM is not set -# CONFIG_ATM_ZATM is not set -# CONFIG_ATM_NICSTAR is not set -# CONFIG_ATM_IDT77252 is not set -# CONFIG_ATM_AMBASSADOR is not set -# CONFIG_ATM_HORIZON is not set -# CONFIG_ATM_IA is not set -# CONFIG_ATM_FORE200E_MAYBE is not set -# CONFIG_ATM_HE is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=y -CONFIG_PPPOATM=y +# CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -611,73 +549,30 @@ CONFIG_PPPOATM=y # # Input device support # -CONFIG_INPUT=y +# CONFIG_INPUT is not set # -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers +# Hardware I/O ports # +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set # # Character devices # -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y +# CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set +# CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=2 -# CONFIG_QIC02_TAPE is not set +# CONFIG_LEGACY_PTYS is not set # # IPMI @@ -692,29 +587,50 @@ CONFIG_LEGACY_PTY_COUNT=2 # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + # # I2C support # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # # CONFIG_W1 is not set +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -728,13 +644,7 @@ CONFIG_LEGACY_PTY_COUNT=2 # # Graphics support # - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y +# CONFIG_FB is not set # # Sound @@ -744,122 +654,49 @@ CONFIG_DUMMY_CONSOLE=y # # USB support # -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set # -# Miscellaneous USB options +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -CONFIG_USB_DEVICEFS=y -CONFIG_USB_BANDWIDTH=y -CONFIG_USB_DYNAMIC_MINORS=y - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_EHCI_SPLIT_ISO=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_UHCI_HCD=m - -# -# USB Device Class drivers -# - -# -# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_STORAGE is not set - -# -# USB Human Interface Devices (HID) -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network adaptors -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_SPEEDTOUCH is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_TEST is not set # # USB Gadget Support # # CONFIG_USB_GADGET is not set +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -880,13 +717,11 @@ CONFIG_USB_UHCI_HCD=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -899,11 +734,15 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_SQUASHFS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y -# CONFIG_LZMA_FS_INFLATE is not set -CONFIG_ZLIB_FS_INFLATE=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set @@ -915,41 +754,113 @@ CONFIG_ZLIB_FS_INFLATE=y # # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set -# CONFIG_EXPORTFS is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types # -# CONFIG_PARTITION_ADVANCED is not set -# CONFIG_MSDOS_PARTITION is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set # # Native Language Support # -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_VM=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_SLAB is not set # CONFIG_KGDB is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_RUNTIME_DEBUG is not set -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_MIPS_UNCACHED is not set +CONFIG_RUNTIME_DEBUG=y +CONFIG_MIPS_UNCACHED=y # # Security options # +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # @@ -957,32 +868,40 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_MD4=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set +# +# Hardware crypto devices +# + # # Library routines # CONFIG_CRC_CCITT=y -CONFIG_CRC32=m -CONFIG_LIBCRC32C=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m +CONFIG_ZLIB_DEFLATE=y diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/000-arch_mips.patch b/openwrt/target/linux/brcm63xx-2.6/patches/000-arch_mips.patch new file mode 100644 index 0000000000..bcb3469769 --- /dev/null +++ b/openwrt/target/linux/brcm63xx-2.6/patches/000-arch_mips.patch @@ -0,0 +1,143 @@ +diff -Naurp -x brcm-boards -x pci linux-2.6.16.7-generic-patched/arch/mips/Kconfig linux-2.6.16.7-patched/arch/mips/Kconfig +--- linux-2.6.16.7-generic-patched/arch/mips/Kconfig 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7-patched/arch/mips/Kconfig 2006-07-05 15:21:58.000000000 +0200 +@@ -10,7 +10,16 @@ menu "Machine selection" + + choice + prompt "System type" +- default SGI_IP22 ++ default MIPS_BRCM ++ ++config MIPS_BRCM ++ bool "Support for the Broadcom boards" ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_HAS_CPU_MIPS32_R1 ++ select IRQ_CPU ++ help ++ This is a fmaily of boards based on the Broadcom MIPS32 + + config MIPS_MTX1 + bool "Support for 4G Systems MTX-1 board" +@@ -777,6 +786,7 @@ config TOSHIBA_RBTX4938 + + endchoice + ++source "arch/mips/brcm-boards/bcm963xx/Kconfig" + source "arch/mips/ddb5xxx/Kconfig" + source "arch/mips/gt64120/ev64120/Kconfig" + source "arch/mips/jazz/Kconfig" +@@ -1046,7 +1056,7 @@ menu "CPU selection" + + choice + prompt "CPU type" +- default CPU_R4X00 ++ default CPU_MIPS32_R1 + + config CPU_MIPS32_R1 + bool "MIPS32 Release 1" +diff -Naurp -x brcm-boards -x pci linux-2.6.16.7-generic-patched/arch/mips/Makefile linux-2.6.16.7-patched/arch/mips/Makefile +--- linux-2.6.16.7-generic-patched/arch/mips/Makefile 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7-patched/arch/mips/Makefile 2006-07-05 15:21:58.000000000 +0200 +@@ -279,6 +279,20 @@ libs-$(CONFIG_SIBYTE_CFE) += arch/mips/s + # + + # ++# Broadcom board ++# ++core-$(CONFIG_MIPS_BRCM) += arch/mips/brcm-boards/generic/ arch/mips/brcm-boards/bcm963xx/ ++core-$(CONFIG_MIPS_BRCM) += bcmdrivers/opensource/char/serial/impl1/ ++#core-$(CONFIG_MIPS_BRCM) += bcmdrivers/opensource/char/board/bcm963xx/impl1/ ++#core-$(CONFIG_MIPS_BRCM) += boardparms/bcm963xx/ ++cflags-$(CONFIG_MIPS_BRCM) += -Iinclude/asm-mips/mach-bcm963xx ++cflags-$(CONFIG_MIPS_BRCM) += -Iarch/mips/brcm-boards/generic/include ++cflags-$(CONFIG_MIPS_BRCM) += -Ibcmdrivers/opensource/include/bcm963xx ++cflags-$(CONFIG_MIPS_BRCM) += -Iboardparms/bcm963xx ++load-$(CONFIG_MIPS_BRCM) += 0xffffffff80010000 ++ ++ ++# + # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. + # + core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ +diff -Naurp -x brcm-boards -x pci linux-2.6.16.7-generic-patched/arch/mips/kernel/cpu-probe.c linux-2.6.16.7-patched/arch/mips/kernel/cpu-probe.c +--- linux-2.6.16.7-generic-patched/arch/mips/kernel/cpu-probe.c 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7-patched/arch/mips/kernel/cpu-probe.c 2006-07-05 15:21:58.000000000 +0200 +@@ -558,6 +558,25 @@ static inline void decode_configs(struct + return; + } + ++static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) ++{ ++ decode_configs(c); ++ switch (c->processor_id & 0xff00) { ++ case PRID_IMP_BCM6338: ++ c->cputype = CPU_BCM6338; ++ break; ++ case PRID_IMP_BCM6345: ++ c->cputype = CPU_BCM6345; ++ break; ++ case PRID_IMP_BCM6348: ++ c->cputype = CPU_BCM6348; ++ break; ++ default: ++ c->cputype = CPU_UNKNOWN; ++ break; ++ } ++} ++ + static inline void cpu_probe_mips(struct cpuinfo_mips *c) + { + decode_configs(c); +@@ -691,6 +710,9 @@ __init void cpu_probe(void) + case PRID_COMP_LEGACY: + cpu_probe_legacy(c); + break; ++ case PRID_COMP_BROADCOM: ++ cpu_probe_broadcom(c); ++ break; + case PRID_COMP_MIPS: + cpu_probe_mips(c); + break; +diff -Naurp -x brcm-boards -x pci linux-2.6.16.7-generic-patched/arch/mips/kernel/proc.c linux-2.6.16.7-patched/arch/mips/kernel/proc.c +--- linux-2.6.16.7-generic-patched/arch/mips/kernel/proc.c 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7-patched/arch/mips/kernel/proc.c 2006-07-05 15:21:58.000000000 +0200 +@@ -81,6 +81,9 @@ static const char *cpu_name[] = { + [CPU_VR4133] = "NEC VR4133", + [CPU_VR4181] = "NEC VR4181", + [CPU_VR4181A] = "NEC VR4181A", ++ [CPU_BCM6338] = "BCM6338", ++ [CPU_BCM6345] = "BCM6345", ++ [CPU_BCM6348] = "BCM6348", + [CPU_SR71000] = "Sandcraft SR71000", + [CPU_PR4450] = "Philips PR4450", + }; +diff -Naurp -x brcm-boards -x pci linux-2.6.16.7-generic-patched/arch/mips/mm/c-r4k.c linux-2.6.16.7-patched/arch/mips/mm/c-r4k.c +--- linux-2.6.16.7-generic-patched/arch/mips/mm/c-r4k.c 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7-patched/arch/mips/mm/c-r4k.c 2006-07-05 15:21:58.000000000 +0200 +@@ -889,6 +889,12 @@ static void __init probe_pcache(void) + if (!(config & MIPS_CONF_M)) + panic("Don't know how to probe P-caches on this cpu."); + ++ if (c->cputype == CPU_BCM6338 || c->cputype == CPU_BCM6345 || c->cputype == CPU_BCM6348){ ++ printk("brcm mips: enabling icache and dcache...\n"); ++ /* Enable caches */ ++ write_c0_diag(read_c0_diag() | 0xC0000000); ++ } ++ + /* + * So we seem to be a MIPS32 or MIPS64 CPU + * So let's probe the I-cache ... +diff -Naurp -x brcm-boards -x pci linux-2.6.16.7-generic-patched/arch/mips/mm/tlbex.c linux-2.6.16.7-patched/arch/mips/mm/tlbex.c +--- linux-2.6.16.7-generic-patched/arch/mips/mm/tlbex.c 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7-patched/arch/mips/mm/tlbex.c 2006-07-05 15:21:58.000000000 +0200 +@@ -858,6 +858,9 @@ static __init void build_tlb_write_entry + case CPU_4KSC: + case CPU_20KC: + case CPU_25KF: ++ case CPU_BCM6338: ++ case CPU_BCM6345: ++ case CPU_BCM6348: + tlbw(p); + break; + diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch b/openwrt/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch deleted file mode 100644 index 185575f670..0000000000 --- a/openwrt/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch +++ /dev/null @@ -1,48189 +0,0 @@ -diff -urN linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/Kconfig linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/Kconfig ---- linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/Kconfig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/Kconfig 2006-06-26 09:07:08.000000000 +0200 -@@ -0,0 +1,169 @@ -+# Kernel and Driver configuration for Broadcom Commengine ADSL board -+choice -+ prompt "Broadcom Commengine ADSL board" -+ depends on MIPS_BRCM -+ default BCM96345 -+ help -+ Select different Broadcom ADSL board -+ -+config BCM96338 -+ bool "96338 ADSL board" -+ select DMA_NONCOHERENT -+ -+config BCM96345 -+ bool "96345 ADSL board" -+ select DMA_NONCOHERENT -+ -+config BCM96348 -+ bool "96348 ADSL board" -+ select DMA_NONCOHERENT -+ -+endchoice -+ -+config BCM_BOARD -+ bool "Support for Broadcom Board" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_SERIAL -+ bool "Support for Serial Port" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ENET -+ tristate "Support for Ethernet" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_USB -+ tristate "Support for USB" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_WLAN -+ tristate "Support for Wireless" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_PCI -+ bool "Support for PCI" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ select PCI -+ -+config BCM_ATMAPI -+ tristate "Support for ATM" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ATMTEST -+ tristate "Support for ATM Diagnostic" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ADSL -+ tristate "Support for ADSL" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ENDPOINT -+ tristate "Support for VOICE" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_PROCFS -+ tristate "Support for PROCFS" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_VDSL -+ tristate "Support for VDSL" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_SECURITY -+ tristate "Support for SECURITY" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_HPNA -+ tristate "Support for HPNA" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_BOARD_IMPL -+ int "Implementation index for ADSL Board" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_SERIAL_IMPL -+ int "Implementation index for Serial" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ENET_IMPL -+ int "Implementation index for Ethernet" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_USB_IMPL -+ int "Implementation index for USB" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_WLAN_IMPL -+ int "Implementation index for WIRELESS" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ATMAPI_IMPL -+ int "Implementation index for ATM" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ATMTEST_IMPL -+ int "Implementation index for ATM Diagnostic" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_BLAA_IMPL -+ int "Implementation index for BLAA" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ADSL_IMPL -+ int "Implementation index for ADSL" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ENDPOINT_IMPL -+ int "Implementation index for VOICE" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_PROCFS_IMPL -+ int "Implementation index for PROCFS" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_VDSL_IMPL -+ int "Implementation index for VDSL" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_SECURITY_IMPL -+ int "Implementation index for SECURITY" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_HPNA_IMPL -+ int "Implementation index for HPNA" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+choice -+ prompt "Root File System" -+ depends on MIPS_BRCM -+ default ROOTFS_SQUASHFS -+ help -+ Select root file system on the board flash. -+ -+config ROOTFS_SQUASHFS -+ bool "SQUASHFS" -+config ROOTFS_CRAMFS -+ bool "CRAMFS" -+config ROOTFS_JFFS2 -+ bool "JFFS2" -+config ROOTFS_NFS -+ bool "NFS" -+ -+endchoice -+ -+config ROOT_FLASHFS -+ string "flash partition" -+ depends on ROOTFS_SQUASHFS || ROOTFS_CRAMFS || ROOTFS_JFFS2 -+ default "root=31:0 ro noinitrd" if ROOTFS_SQUASHFS = y || ROOTFS_CRAMFS = y -+ default "root=31:2 ro noinitrd" if ROOTFS_JFFS2 = y -+ help -+ This is the root file system partition on flash memory -+ -+config ROOT_NFS_DIR -+ string "NFS server path" -+ depends on ROOTFS_NFS -+ default "/opt/bcm96338/targets/96338R/fs" if BCM96338 = y -+ default "/opt/bcm96345/targets/96345R/fs" if BCM96345 = y -+ default "/opt/bcm96348/targets/96348R/fs" if BCM96348 = y -+ help -+ This is the path of NFS server (host system) -diff -urN linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/Makefile linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/Makefile ---- linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/Makefile 2006-06-26 09:07:08.000000000 +0200 -@@ -0,0 +1,23 @@ -+# -+# Makefile for generic Broadcom MIPS boards -+# -+# Copyright (C) 2004 Broadcom Corporation -+# -+obj-y := irq.o prom.o setup.o time.o ser_init.o -+ -+SRCBASE := $(TOPDIR) -+EXTRA_CFLAGS += -I$(INC_BRCMBOARDPARMS_PATH)/$(BRCM_BOARD) -I$(SRCBASE)/include -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD) -+#EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -DDBG -+EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -+ -+ -+ifeq "$(ADSL)" "ANNEX_B" -+EXTRA_CFLAGS += -DADSL_ANNEXB -+endif -+ifeq "$(ADSL)" "SADSL" -+EXTRA_CFLAGS += -DADSL_SADSL -+endif -+ifeq "$(ADSL)" "ANNEX_C" -+EXTRA_CFLAGS += -DADSL_ANNEXC -+endif -+ -diff -urN linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/irq.c linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/irq.c ---- linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/irq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/irq.c 2006-06-26 09:07:08.000000000 +0200 -@@ -0,0 +1,276 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * Interrupt control functions for Broadcom 963xx MIPS boards -+ */ -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+extern asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs); -+ -+static void irq_dispatch_int(struct pt_regs *regs) -+{ -+ unsigned int pendingIrqs; -+ static unsigned int irqBit; -+ static unsigned int isrNumber = 31; -+ -+ pendingIrqs = PERF->IrqStatus & PERF->IrqMask; -+ if (!pendingIrqs) { -+ return; -+ } -+ -+ while (1) { -+ irqBit <<= 1; -+ isrNumber++; -+ if (isrNumber == 32) { -+ isrNumber = 0; -+ irqBit = 0x1; -+ } -+ if (pendingIrqs & irqBit) { -+ PERF->IrqMask &= ~irqBit; // mask -+ do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET, regs); -+ break; -+ } -+ } -+} -+ -+static void irq_dispatch_ext(uint32 irq, struct pt_regs *regs) -+{ -+ if (!(PERF->ExtIrqCfg & (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)))) { -+ printk("**** Ext IRQ mask. Should not dispatch ****\n"); -+ } -+ /* disable and clear interrupt in the controller */ -+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); -+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); -+ do_IRQ(irq, regs); -+} -+ -+void brcm_irq_dispatch(struct pt_regs *regs) -+{ -+ u32 cause; -+ while((cause = (read_c0_cause()& CAUSEF_IP))) { -+ if (cause & CAUSEF_IP7) -+ do_IRQ(MIPS_TIMER_INT, regs); -+ else if (cause & CAUSEF_IP2) -+ irq_dispatch_int(regs); -+ else if (cause & CAUSEF_IP3) -+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0, regs); -+ else if (cause & CAUSEF_IP4) -+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1, regs); -+ else if (cause & CAUSEF_IP5) -+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2, regs); -+ else if (cause & CAUSEF_IP6) -+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3, regs); -+ cli(); -+ } -+} -+ -+ -+void enable_brcm_irq(unsigned int irq) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { -+ PERF->IrqMask |= (1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); -+ } -+ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { -+ /* enable and clear interrupt in the controller */ -+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); -+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); -+ } -+ local_irq_restore(flags); -+} -+ -+void disable_brcm_irq(unsigned int irq) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { -+ PERF->IrqMask &= ~(1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); -+ } -+ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { -+ /* disable interrupt in the controller */ -+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); -+ } -+ local_irq_restore(flags); -+} -+ -+void ack_brcm_irq(unsigned int irq) -+{ -+ /* Already done in brcm_irq_dispatch */ -+} -+ -+unsigned int startup_brcm_irq(unsigned int irq) -+{ -+ enable_brcm_irq(irq); -+ -+ return 0; /* never anything pending */ -+} -+ -+unsigned int startup_brcm_none(unsigned int irq) -+{ -+ return 0; -+} -+ -+void end_brcm_irq(unsigned int irq) -+{ -+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) -+ enable_brcm_irq(irq); -+} -+ -+void end_brcm_none(unsigned int irq) -+{ -+} -+ -+#define ALLINTS_NOTIMER (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) -+ -+static void __init brcm_irq_setup(void) -+{ -+ extern asmlinkage void brcmIRQ(void); -+ -+ clear_c0_status(ST0_BEV); -+ set_except_vector(0, brcmIRQ); -+ change_c0_status(ST0_IM, ALLINTS_NOTIMER); -+ -+#ifdef CONFIG_REMOTE_DEBUG -+ rs_kgdb_hook(0); -+#endif -+} -+ -+static struct hw_interrupt_type brcm_irq_type = { -+ .typename = "MIPS", -+ .startup = startup_brcm_irq, -+ .shutdown = disable_brcm_irq, -+ .enable = enable_brcm_irq, -+ .disable = disable_brcm_irq, -+ .ack = ack_brcm_irq, -+ .end = end_brcm_irq, -+ .set_affinity = NULL -+}; -+ -+static struct hw_interrupt_type brcm_irq_no_end_type = { -+ .typename = "MIPS", -+ .startup = startup_brcm_none, -+ .shutdown = disable_brcm_irq, -+ .enable = enable_brcm_irq, -+ .disable = disable_brcm_irq, -+ .ack = ack_brcm_irq, -+ .end = end_brcm_none, -+ .set_affinity = NULL -+}; -+ -+void __init arch_init_irq(void) -+{ -+ int i; -+ -+ for (i = 0; i < NR_IRQS; i++) { -+ irq_desc[i].status = IRQ_DISABLED; -+ irq_desc[i].action = 0; -+ irq_desc[i].depth = 1; -+ irq_desc[i].handler = &brcm_irq_type; -+ } -+ -+ brcm_irq_setup(); -+} -+ -+int request_external_irq(unsigned int irq, -+ FN_HANDLER handler, -+ unsigned long irqflags, -+ const char * devname, -+ void *dev_id) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); // Clear -+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); // Mask -+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_INSENS_SHFT)); // Edge insesnsitive -+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_LEVEL_SHFT)); // Level triggered -+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_SENSE_SHFT)); // Low level -+ -+ local_irq_restore(flags); -+ -+ return( request_irq(irq, handler, irqflags, devname, dev_id) ); -+} -+ -+/* VxWorks compatibility function(s). */ -+ -+unsigned int BcmHalMapInterrupt(FN_HANDLER pfunc, unsigned int param, -+ unsigned int interruptId) -+{ -+ int nRet = -1; -+ char *devname; -+ -+ devname = kmalloc(16, GFP_KERNEL); -+ if (devname) -+ sprintf( devname, "brcm_%d", interruptId ); -+ -+ /* Set the IRQ description to not automatically enable the interrupt at -+ * the end of an ISR. The driver that handles the interrupt must -+ * explicitly call BcmHalInterruptEnable or enable_brcm_irq. This behavior -+ * is consistent with interrupt handling on VxWorks. -+ */ -+ irq_desc[interruptId].handler = &brcm_irq_no_end_type; -+ -+ if( interruptId >= INTERNAL_ISR_TABLE_OFFSET ) -+ { -+ nRet = request_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT, -+ devname, (void *) param ); -+ } -+ else if (interruptId >= INTERRUPT_ID_EXTERNAL_0 && interruptId <= INTERRUPT_ID_EXTERNAL_3) -+ { -+ nRet = request_external_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT, -+ devname, (void *) param ); -+ } -+ -+ return( nRet ); -+} -+ -+ -+/* Debug function. */ -+ -+void dump_intr_regs(void) -+{ -+ printk("PERF->ExtIrqCfg [%08x]\n", *(&(PERF->ExtIrqCfg))); -+} -+ -+EXPORT_SYMBOL(enable_brcm_irq); -+EXPORT_SYMBOL(disable_brcm_irq); -+EXPORT_SYMBOL(request_external_irq); -+EXPORT_SYMBOL(BcmHalMapInterrupt); -+ -diff -urN linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/prom.c linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/prom.c ---- linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/prom.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/prom.c 2006-06-26 09:07:08.000000000 +0200 -@@ -0,0 +1,233 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * prom.c: PROM library initialization code. -+ * -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include "boardparms.h" -+#include "softdsl/AdslCoreDefs.h" -+ -+ -+extern int do_syslog(int, char *, int); -+extern void serial_init(void); -+extern void __init InitNvramInfo( void ); -+extern void kerSysFlashInit( void ); -+extern unsigned long get_nvram_start_addr(void); -+void __init create_root_nfs_cmdline( char *cmdline ); -+ -+#if defined(CONFIG_BCM96338) -+#define CPU_CLOCK 240000000 -+#define MACH_BCM MACH_BCM96338 -+#endif -+#if defined(CONFIG_BCM96345) -+#define CPU_CLOCK 140000000 -+#define MACH_BCM MACH_BCM96345 -+#endif -+#if defined(CONFIG_BCM96348) -+void __init calculateCpuSpeed(void); -+static unsigned long cpu_speed; -+#define CPU_CLOCK cpu_speed -+#define MACH_BCM MACH_BCM96348 -+#endif -+ -+const char *get_system_type(void) -+{ -+ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); -+ -+ return( pNvramData->szBoardId ); -+} -+ -+unsigned long getMemorySize(void) -+{ -+ unsigned long ulSdramType = BOARD_SDRAM_TYPE; -+ -+ unsigned long ulSdramSize; -+ -+ switch( ulSdramType ) -+ { -+ case BP_MEMORY_16MB_1_CHIP: -+ case BP_MEMORY_16MB_2_CHIP: -+ ulSdramSize = 16 * 1024 * 1024; -+ break; -+ case BP_MEMORY_32MB_1_CHIP: -+ case BP_MEMORY_32MB_2_CHIP: -+ ulSdramSize = 32 * 1024 * 1024; -+ break; -+ case BP_MEMORY_64MB_2_CHIP: -+ ulSdramSize = 64 * 1024 * 1024; -+ break; -+ default: -+ ulSdramSize = 8 * 1024 * 1024; -+ break; -+ } -+ -+ return ulSdramSize; -+} -+ -+/* -------------------------------------------------------------------------- -+ Name: prom_init -+ -------------------------------------------------------------------------- */ -+void __init prom_init(void) -+{ -+ extern ulong r4k_interval; -+ -+ serial_init(); -+ -+ kerSysFlashInit(); -+ -+ do_syslog(8, NULL, 8); -+ -+ printk( "%s prom init\n", get_system_type() ); -+ -+ PERF->IrqMask = 0; -+ -+ arcs_cmdline[0] = '\0'; -+ -+#if defined(CONFIG_ROOT_NFS) -+ create_root_nfs_cmdline( arcs_cmdline ); -+#elif defined(CONFIG_ROOT_FLASHFS) -+ strcpy(arcs_cmdline, CONFIG_ROOT_FLASHFS); -+#endif -+ -+ add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); -+ -+#if defined(CONFIG_BCM96348) -+ calculateCpuSpeed(); -+#endif -+ /* Count register increments every other clock */ -+ r4k_interval = CPU_CLOCK / HZ / 2; -+ mips_hpt_frequency = CPU_CLOCK / 2; -+ -+ mips_machgroup = MACH_GROUP_BRCM; -+ mips_machtype = MACH_BCM; -+} -+ -+/* -------------------------------------------------------------------------- -+ Name: prom_free_prom_memory -+Abstract: -+ -------------------------------------------------------------------------- */ -+void __init prom_free_prom_memory(void) -+{ -+ -+} -+ -+ -+#if defined(CONFIG_ROOT_NFS) -+/* This function reads in a line that looks something like this: -+ * -+ * -+ * CFE bootline=bcmEnet(0,0)host:vmlinux e=192.169.0.100:ffffff00 h=192.169.0.1 -+ * -+ * -+ * and retuns in the cmdline parameter some that looks like this: -+ * -+ * CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/opt/targets/96345R/fs -+ * ip=192.168.0.100:192.168.0.1::255.255.255.0::eth0:off rw" -+ */ -+#define BOOT_LINE_ADDR 0x0 -+#define HEXDIGIT(d) ((d >= '0' && d <= '9') ? (d - '0') : ((d | 0x20) - 'W')) -+#define HEXBYTE(b) (HEXDIGIT((b)[0]) << 4) + HEXDIGIT((b)[1]) -+extern unsigned long get_nvram_start_addr(void); -+ -+void __init create_root_nfs_cmdline( char *cmdline ) -+{ -+ char root_nfs_cl[] = "root=/dev/nfs nfsroot=%s:" CONFIG_ROOT_NFS_DIR -+ " ip=%s:%s::%s::eth0:off rw"; -+ -+ char *localip = NULL; -+ char *hostip = NULL; -+ char mask[16] = ""; -+ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); -+ char bootline[128] = ""; -+ char *p = bootline; -+ -+ memcpy(bootline, pNvramData->szBootline, sizeof(bootline)); -+ while( *p ) -+ { -+ if( p[0] == 'e' && p[1] == '=' ) -+ { -+ /* Found local ip address */ -+ p += 2; -+ localip = p; -+ while( *p && *p != ' ' && *p != ':' ) -+ p++; -+ if( *p == ':' ) -+ { -+ /* Found network mask (eg FFFFFF00 */ -+ *p++ = '\0'; -+ sprintf( mask, "%u.%u.%u.%u", HEXBYTE(p), HEXBYTE(p + 2), -+ HEXBYTE(p + 4), HEXBYTE(p + 6) ); -+ p += 4; -+ } -+ else if( *p == ' ' ) -+ *p++ = '\0'; -+ } -+ else if( p[0] == 'h' && p[1] == '=' ) -+ { -+ /* Found host ip address */ -+ p += 2; -+ hostip = p; -+ while( *p && *p != ' ' ) -+ p++; -+ if( *p == ' ' ) -+ *p++ = '\0'; -+ } -+ else -+ p++; -+ } -+ -+ if( localip && hostip ) -+ sprintf( cmdline, root_nfs_cl, hostip, localip, hostip, mask ); -+} -+#endif -+ -+#if defined(CONFIG_BCM96348) -+/* ********************************************************************* -+ * calculateCpuSpeed() -+ * Calculate the BCM6348 CPU speed by reading the PLL strap register -+ * and applying the following formula: -+ * cpu_clk = (.25 * 64MHz freq) * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) -+ * Input parameters: -+ * none -+ * Return value: -+ * none -+ ********************************************************************* */ -+void __init calculateCpuSpeed(void) -+{ -+ UINT32 pllStrap = PERF->PllStrap; -+ int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT; -+ int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT; -+ int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT; -+ -+ cpu_speed = (16 * (n1 + 1) * (n2 + 2) / (m1cpu + 1)) * 1000000; -+} -+#endif -+ -diff -urN linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/ser_init.c linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/ser_init.c ---- linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/ser_init.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/ser_init.c 2006-06-26 09:07:08.000000000 +0200 -@@ -0,0 +1,180 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * Broadcom bcm63xx serial port initialization, also prepare for printk -+ * by registering with console_init -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#define SER63XX_DEFAULT_BAUD 115200 -+#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH) -+#define stUart ((volatile Uart * const) UART_BASE) -+ -+// Transmit interrupts -+#define TXINT (TXFIFOEMT | TXUNDERR | TXOVFERR) -+// Receive interrupts -+#define RXINT (RXFIFONE | RXOVFERR) -+ -+/* -------------------------------------------------------------------------- -+ Name: serial_init -+ Purpose: Initalize the UART -+-------------------------------------------------------------------------- */ -+void __init serial_init(void) -+{ -+ UINT32 tmpVal = SER63XX_DEFAULT_BAUD; -+ ULONG clockFreqHz; -+ -+#if defined(CONFIG_BCM96345) -+ // Make sure clock is ticking -+ PERF->blkEnables |= UART_CLK_EN; -+#endif -+ -+ /* Dissable channel's receiver and transmitter. */ -+ stUart->control &= ~(BRGEN|TXEN|RXEN); -+ -+ /*--------------------------------------------------------------------*/ -+ /* Write the table value to the clock select register. */ -+ /* DPullen - this is the equation to use: */ -+ /* value = clockFreqHz / baud / 32-1; */ -+ /* (snmod) Actually you should also take into account any necessary */ -+ /* rounding. Divide by 16, look at lsb, if 0, divide by 2 */ -+ /* and subtract 1. If 1, just divide by 2 */ -+ /*--------------------------------------------------------------------*/ -+ clockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT; -+ tmpVal = (clockFreqHz / tmpVal) / 16; -+ if( tmpVal & 0x01 ) -+ tmpVal /= 2; //Rounding up, so sub is already accounted for -+ else -+ tmpVal = (tmpVal / 2) - 1; // Rounding down so we must sub 1 -+ stUart->baudword = tmpVal; -+ -+ /* Finally, re-enable the transmitter and receiver. */ -+ stUart->control |= (BRGEN|TXEN|RXEN); -+ -+ stUart->config = (BITS8SYM | ONESTOP); -+ // Set the FIFO interrupt depth ... stUart->fifocfg = 0xAA; -+ stUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS; -+ stUart->intMask = 0; -+ stUart->intMask = RXINT | TXINT; -+} -+ -+ -+/* prom_putc() -+ * Output a character to the UART -+ */ -+void prom_putc(char c) -+{ -+ /* Wait for Tx uffer to empty */ -+ while (! (READ16(stUart->intStatus) & TXFIFOEMT)); -+ /* Send character */ -+ stUart->Data = c; -+} -+ -+/* prom_puts() -+ * Write a string to the UART -+ */ -+void prom_puts(const char *s) -+{ -+ while (*s) { -+ if (*s == '\n') { -+ prom_putc('\r'); -+ } -+ prom_putc(*s++); -+ } -+} -+ -+ -+/* prom_getc_nowait() -+ * Returns a character from the UART -+ * Returns -1 if no characters available or corrupted -+ */ -+int prom_getc_nowait(void) -+{ -+ uint16 uStatus; -+ int cData = -1; -+ -+ uStatus = READ16(stUart->intStatus); -+ -+ if (uStatus & RXFIFONE) { /* Do we have a character? */ -+ cData = READ16(stUart->Data) & 0xff; /* Read character */ -+ if (uStatus & (RXFRAMERR | RXPARERR)) { /* If we got an error, throw it away */ -+ cData = -1; -+ } -+ } -+ -+ return cData; -+} -+ -+/* prom_getc() -+ * Returns a charcter from the serial port -+ * Will block until it receives a valid character -+*/ -+char prom_getc(void) -+{ -+ int cData = -1; -+ -+ /* Loop until we get a valid character */ -+ while(cData == -1) { -+ cData = prom_getc_nowait(); -+ } -+ return (char) cData; -+} -+ -+/* prom_testc() -+ * Returns 0 if no characters available -+ */ -+int prom_testc(void) -+{ -+ uint16 uStatus; -+ -+ uStatus = READ16(stUart->intStatus); -+ -+ return (uStatus & RXFIFONE); -+} -+ -+#if CONFIG_REMOTE_DEBUG -+/* Prevent other code from writing to the serial port */ -+void _putc(char c) { } -+void _puts(const char *ptr) { } -+#else -+/* Low level outputs call prom routines */ -+void _putc(char c) { -+ prom_putc(c); -+} -+void _puts(const char *ptr) { -+ prom_puts(ptr); -+} -+#endif -diff -urN linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/setup.c linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/setup.c ---- linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/setup.c 2006-06-26 09:07:08.000000000 +0200 -@@ -0,0 +1,519 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * Generic setup routines for Broadcom 963xx MIPS boards -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+extern void brcm_timer_setup(struct irqaction *irq); -+extern unsigned long getMemorySize(void); -+ -+#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) -+#include -+#include -+#include -+#include -+ -+static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); -+#endif -+ -+/* This function should be in a board specific directory. For now, -+ * assume that all boards that include this file use a Broadcom chip -+ * with a soft reset bit in the PLL control register. -+ */ -+static void brcm_machine_restart(char *command) -+{ -+ const unsigned long ulSoftReset = 0x00000001; -+ unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008; -+ *pulPllCtrl |= ulSoftReset; -+} -+ -+static void brcm_machine_halt(void) -+{ -+ printk("System halted\n"); -+ while (1); -+} -+ -+#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) -+ -+static void mpi_SetLocalPciConfigReg(uint32 reg, uint32 value) -+{ -+ /* write index then value */ -+ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;; -+ mpi->pcicfgdata = value; -+} -+ -+static uint32 mpi_GetLocalPciConfigReg(uint32 reg) -+{ -+ /* write index then get value */ -+ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;; -+ return mpi->pcicfgdata; -+} -+ -+/* -+ * mpi_ResetPcCard: Set/Reset the PcCard -+ */ -+static void mpi_ResetPcCard(int cardtype, BOOL bReset) -+{ -+ if (cardtype == MPI_CARDTYPE_NONE) { -+ return; -+ } -+ -+ if (cardtype == MPI_CARDTYPE_CARDBUS) { -+ bReset = ! bReset; -+ } -+ -+ if (bReset) { -+ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET); -+ } else { -+ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 | PCCARD_CARD_RESET); -+ } -+} -+ -+/* -+ * mpi_ConfigCs: Configure an MPI/EBI chip select -+ */ -+static void mpi_ConfigCs(uint32 cs, uint32 base, uint32 size, uint32 flags) -+{ -+ mpi->cs[cs].base = ((base & 0x1FFFFFFF) | size); -+ mpi->cs[cs].config = flags; -+} -+ -+/* -+ * mpi_InitPcmciaSpace -+ */ -+static void mpi_InitPcmciaSpace(void) -+{ -+ // ChipSelect 4 controls PCMCIA Memory accesses -+ mpi_ConfigCs(PCMCIA_COMMON_BASE, pcmciaMem, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE)); -+ // ChipSelect 5 controls PCMCIA Attribute accesses -+ mpi_ConfigCs(PCMCIA_ATTRIBUTE_BASE, pcmciaAttr, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE)); -+ // ChipSelect 6 controls PCMCIA I/O accesses -+ mpi_ConfigCs(PCMCIA_IO_BASE, pcmciaIo, EBI_SIZE_64K, (EBI_WORD_WIDE|EBI_ENABLE)); -+ -+ mpi->pcmcia_cntl2 = ((PCMCIA_ATTR_ACTIVE << RW_ACTIVE_CNT_BIT) | -+ (PCMCIA_ATTR_INACTIVE << INACTIVE_CNT_BIT) | -+ (PCMCIA_ATTR_CE_SETUP << CE_SETUP_CNT_BIT) | -+ (PCMCIA_ATTR_CE_HOLD << CE_HOLD_CNT_BIT)); -+ -+ mpi->pcmcia_cntl2 |= (PCMCIA_HALFWORD_EN | PCMCIA_BYTESWAP_DIS); -+} -+ -+/* -+ * cardtype_vcc_detect: PC Card's card detect and voltage sense connection -+ * -+ * CD1#/ CD2#/ VS1#/ VS2#/ Card Initial Vcc -+ * CCD1# CCD2# CVS1 CVS2 Type -+ * -+ * GND GND open open 16-bit 5 vdc -+ * -+ * GND GND GND open 16-bit 3.3 vdc -+ * -+ * GND GND open GND 16-bit x.x vdc -+ * -+ * GND GND GND GND 16-bit 3.3 & x.x vdc -+ * -+ *==================================================================== -+ * -+ * CVS1 GND CCD1# open CardBus 3.3 vdc -+ * -+ * GND CVS2 open CCD2# CardBus x.x vdc -+ * -+ * GND CVS1 CCD2# open CardBus y.y vdc -+ * -+ * GND CVS2 GND CCD2# CardBus 3.3 & x.x vdc -+ * -+ * CVS2 GND open CCD1# CardBus x.x & y.y vdc -+ * -+ * GND CVS1 CCD2# open CardBus 3.3, x.x & y.y vdc -+ * -+ */ -+static int cardtype_vcc_detect(void) -+{ -+ uint32 data32; -+ int cardtype; -+ -+ cardtype = MPI_CARDTYPE_NONE; -+ mpi->pcmcia_cntl1 = 0x0000A000; // Turn on the output enables and drive -+ // the CVS pins to 0. -+ data32 = mpi->pcmcia_cntl1; -+ switch (data32 & 0x00000003) // Test CD1# and CD2#, see if card is plugged in. -+ { -+ case 0x00000003: // No Card is in the slot. -+ printk("mpi: No Card is in the PCMCIA slot\n"); -+ break; -+ -+ case 0x00000002: // Partial insertion, No CD2#. -+ printk("mpi: Card in the PCMCIA slot partial insertion, no CD2 signal\n"); -+ break; -+ -+ case 0x00000001: // Partial insertion, No CD1#. -+ printk("mpi: Card in the PCMCIA slot partial insertion, no CD1 signal\n"); -+ break; -+ -+ case 0x00000000: -+ mpi->pcmcia_cntl1 = 0x0000A0C0; // Turn off the CVS output enables and -+ // float the CVS pins. -+ mdelay(1); -+ data32 = mpi->pcmcia_cntl1; -+ // Read the Register. -+ switch (data32 & 0x0000000C) // See what is on the CVS pins. -+ { -+ case 0x00000000: // CVS1 and CVS2 are tied to ground, only 1 option. -+ printk("mpi: Detected 3.3 & x.x 16-bit PCMCIA card\n"); -+ cardtype = MPI_CARDTYPE_PCMCIA; -+ break; -+ -+ case 0x00000004: // CVS1 is open or tied to CCD1/CCD2 and CVS2 is tied to ground. -+ // 2 valid voltage options. -+ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. -+ { -+ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. -+ // This is not a valid combination. -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. -+ mpi->pcmcia_cntl1 = 0x0000A080; // Drive CVS1 to a 0. -+ mdelay(1); -+ data32 = mpi->pcmcia_cntl1; -+ if (data32 & 0x00000002) { // CCD2 is tied to CVS2, not valid. -+ printk("mpi: Unknown card plugged into slot\n"); -+ } else { // CCD2 is tied to CVS1. -+ printk("mpi: Detected 3.3, x.x and y.y Cardbus card\n"); -+ cardtype = MPI_CARDTYPE_CARDBUS; -+ } -+ break; -+ -+ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. -+ // This is not a valid combination. -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ case 0x00000000: // CCD1 and CCD2 are tied to ground. -+ printk("mpi: Detected x.x vdc 16-bit PCMCIA card\n"); -+ cardtype = MPI_CARDTYPE_PCMCIA; -+ break; -+ } -+ break; -+ -+ case 0x00000008: // CVS2 is open or tied to CCD1/CCD2 and CVS1 is tied to ground. -+ // 2 valid voltage options. -+ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. -+ { -+ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. -+ // This is not a valid combination. -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. -+ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. -+ mdelay(1); -+ data32 = mpi->pcmcia_cntl1; -+ if (data32 & 0x00000002) { // CCD2 is tied to CVS1, not valid. -+ printk("mpi: Unknown card plugged into slot\n"); -+ } else {// CCD2 is tied to CVS2. -+ printk("mpi: Detected 3.3 and x.x Cardbus card\n"); -+ cardtype = MPI_CARDTYPE_CARDBUS; -+ } -+ break; -+ -+ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. -+ // This is not a valid combination. -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ case 0x00000000: // CCD1 and CCD2 are tied to ground. -+ cardtype = MPI_CARDTYPE_PCMCIA; -+ printk("mpi: Detected 3.3 vdc 16-bit PCMCIA card\n"); -+ break; -+ } -+ break; -+ -+ case 0x0000000C: // CVS1 and CVS2 are open or tied to CCD1/CCD2. -+ // 5 valid voltage options. -+ -+ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. -+ { -+ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. -+ // This is not a valid combination. -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. -+ // CCD1 is tied to ground. -+ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. -+ mdelay(1); -+ data32 = mpi->pcmcia_cntl1; -+ if (data32 & 0x00000002) { // CCD2 is tied to CVS1. -+ printk("mpi: Detected y.y vdc Cardbus card\n"); -+ } else { // CCD2 is tied to CVS2. -+ printk("mpi: Detected x.x vdc Cardbus card\n"); -+ } -+ cardtype = MPI_CARDTYPE_CARDBUS; -+ break; -+ -+ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. -+ // CCD2 is tied to ground. -+ -+ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. -+ mdelay(1); -+ data32 = mpi->pcmcia_cntl1; -+ if (data32 & 0x00000001) {// CCD1 is tied to CVS1. -+ printk("mpi: Detected 3.3 vdc Cardbus card\n"); -+ } else { // CCD1 is tied to CVS2. -+ printk("mpi: Detected x.x and y.y Cardbus card\n"); -+ } -+ cardtype = MPI_CARDTYPE_CARDBUS; -+ break; -+ -+ case 0x00000000: // CCD1 and CCD2 are tied to ground. -+ cardtype = MPI_CARDTYPE_PCMCIA; -+ printk("mpi: Detected 5 vdc 16-bit PCMCIA card\n"); -+ break; -+ } -+ break; -+ -+ default: -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ } -+ } -+ return cardtype; -+} -+ -+/* -+ * mpi_DetectPcCard: Detect the plugged in PC-Card -+ * Return: < 0 => Unknown card detected -+ * 0 => No card detected -+ * 1 => 16-bit card detected -+ * 2 => 32-bit CardBus card detected -+ */ -+static int mpi_DetectPcCard(void) -+{ -+ int cardtype; -+ -+ cardtype = cardtype_vcc_detect(); -+ switch(cardtype) { -+ case MPI_CARDTYPE_PCMCIA: -+ mpi->pcmcia_cntl1 &= ~0x0000e000; // disable enable bits -+ //mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET); -+ mpi->pcmcia_cntl1 |= (PCMCIA_ENABLE | PCMCIA_GPIO_ENABLE); -+ mpi_InitPcmciaSpace(); -+ mpi_ResetPcCard(cardtype, FALSE); -+ // Hold card in reset for 10ms -+ mdelay(10); -+ mpi_ResetPcCard(cardtype, TRUE); -+ // Let card come out of reset -+ mdelay(100); -+ break; -+ case MPI_CARDTYPE_CARDBUS: -+ // 8 => CardBus Enable -+ // 1 => PCI Slot Number -+ // C => Float VS1 & VS2 -+ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & 0xFFFF0000) | -+ CARDBUS_ENABLE | -+ (CARDBUS_SLOT << 8)| -+ VS2_OEN | -+ VS1_OEN; -+ /* access to this memory window will be to/from CardBus */ -+ mpi->l2pmremap1 |= CARDBUS_MEM; -+ -+ // Need to reset the Cardbus Card. There's no CardManager to do this, -+ // and we need to be ready for PCI configuration. -+ mpi_ResetPcCard(cardtype, FALSE); -+ // Hold card in reset for 10ms -+ mdelay(10); -+ mpi_ResetPcCard(cardtype, TRUE); -+ // Let card come out of reset -+ mdelay(100); -+ break; -+ default: -+ break; -+ } -+ return cardtype; -+} -+ -+static int mpi_init(void) -+{ -+ unsigned long data; -+ unsigned int chipid; -+ unsigned int chiprev; -+ unsigned int sdramsize; -+ -+ chipid = (PERF->RevID & 0xFFFF0000) >> 16; -+ chiprev = (PERF->RevID & 0xFF); -+ sdramsize = getMemorySize(); -+ /* -+ * Init the pci interface -+ */ -+ data = GPIO->GPIOMode; // GPIO mode register -+ data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus -+ GPIO->GPIOMode = data; // PCI internal arbiter -+ -+ /* -+ * In the BCM6348 CardBus support is defaulted to Slot 0 -+ * because there is no external IDSEL for CardBus. To disable -+ * the CardBus and allow a standard PCI card in Slot 0 -+ * set the cbus_idsel field to 0x1f. -+ */ -+ /* -+ uData = mpi->pcmcia_cntl1; -+ uData |= CARDBUS_IDSEL; -+ mpi->pcmcia_cntl1 = uData; -+ */ -+ // Setup PCI I/O Window range. Give 64K to PCI I/O -+ mpi->l2piorange = ~(BCM_PCI_IO_SIZE_64KB-1); -+ // UBUS to PCI I/O base address -+ mpi->l2piobase = BCM_PCI_IO_BASE & BCM_PCI_ADDR_MASK; -+ // UBUS to PCI I/O Window remap -+ mpi->l2pioremap = (BCM_PCI_IO_BASE | MEM_WINDOW_EN); -+ -+ // enable PCI related GPIO pins and data swap between system and PCI bus -+ mpi->locbuscntrl = (EN_PCI_GPIO | DIR_U2P_NOSWAP); -+ -+ /* Enable 6348 BusMaster and Memory access mode */ -+ data = mpi_GetLocalPciConfigReg(PCI_COMMAND); -+ data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); -+ mpi_SetLocalPciConfigReg(PCI_COMMAND, data); -+ -+ /* Configure two 16 MByte PCI to System memory regions. */ -+ /* These memory regions are used when PCI device is a bus master */ -+ /* Accesses to the SDRAM from PCI bus will be "byte swapped" for this region */ -+ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_3, BCM_HOST_MEM_SPACE1); -+ mpi->sp0remap = 0x0; -+ -+ /* Accesses to the SDRAM from PCI bus will not be "byte swapped" for this region */ -+ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_4, BCM_HOST_MEM_SPACE2); -+ mpi->sp1remap = 0x0; -+ mpi->pcimodesel |= (PCI_BAR2_NOSWAP | 0x40); -+ -+ if ((chipid == 0x6348) && (chiprev == 0xb0)) { -+ mpi->sp0range = ~(sdramsize-1); -+ mpi->sp1range = ~(sdramsize-1); -+ } -+ /* -+ * Change 6348 PCI Cfg Reg. offset 0x40 to PCI memory read retry count infinity -+ * by set 0 in bit 8~15. This resolve read Bcm4306 srom return 0xffff in -+ * first read. -+ */ -+ data = mpi_GetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER); -+ data &= ~BRCM_PCI_CONFIG_TIMER_RETRY_MASK; -+ data |= 0x00000080; -+ mpi_SetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER, data); -+ -+ /* enable pci interrupt */ -+ mpi->locintstat |= (EXT_PCI_INT << 16); -+ -+ mpi_DetectPcCard(); -+ -+ ioport_resource.start = BCM_PCI_IO_BASE; -+ ioport_resource.end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB; -+ -+#if defined(CONFIG_USB) -+ PERF->blkEnables |= USBH_CLK_EN; -+ mdelay(100); -+ *USBH_NON_OHCI = NON_OHCI_BYTE_SWAP; -+#endif -+ -+ return 0; -+} -+#endif -+ -+static int __init brcm63xx_setup(void) -+{ -+ extern int panic_timeout; -+ -+ _machine_restart = brcm_machine_restart; -+ _machine_halt = brcm_machine_halt; -+ _machine_power_off = brcm_machine_halt; -+ -+ board_timer_setup = brcm_timer_setup; -+ -+ panic_timeout = 180; -+ -+#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) -+ /* mpi initialization */ -+ mpi_init(); -+#endif -+ return 0; -+} -+ -+early_initcall(brcm63xx_setup); -+ -+/*************************************************************************** -+ * C++ New and delete operator functions -+ ***************************************************************************/ -+ -+/* void *operator new(unsigned int sz) */ -+void *_Znwj(unsigned int sz) -+{ -+ return( kmalloc(sz, GFP_KERNEL) ); -+} -+ -+/* void *operator new[](unsigned int sz)*/ -+void *_Znaj(unsigned int sz) -+{ -+ return( kmalloc(sz, GFP_KERNEL) ); -+} -+ -+/* placement new operator */ -+/* void *operator new (unsigned int size, void *ptr) */ -+void *ZnwjPv(unsigned int size, void *ptr) -+{ -+ return ptr; -+} -+ -+/* void operator delete(void *m) */ -+void _ZdlPv(void *m) -+{ -+ kfree(m); -+} -+ -+/* void operator delete[](void *m) */ -+void _ZdaPv(void *m) -+{ -+ kfree(m); -+} -+ -+EXPORT_SYMBOL(_Znwj); -+EXPORT_SYMBOL(_Znaj); -+EXPORT_SYMBOL(ZnwjPv); -+EXPORT_SYMBOL(_ZdlPv); -+EXPORT_SYMBOL(_ZdaPv); -+ -diff -urN linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/time.c linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/time.c ---- linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/time.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/time.c 2006-06-26 09:07:08.000000000 +0200 -@@ -0,0 +1,277 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * Setup time for Broadcom 963xx MIPS boards -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+unsigned long r4k_interval; /* Amount to increment compare reg each time */ -+static unsigned long r4k_cur; /* What counter should be at next timer irq */ -+ -+/* Cycle counter value at the previous timer interrupt.. */ -+static unsigned int timerhi = 0, timerlo = 0; -+ -+extern volatile unsigned long wall_jiffies; -+ -+/* Optional board-specific timer routine */ -+void (*board_timer_interrupt)(int irq, void *dev_id, struct pt_regs * regs); -+ -+static inline void ack_r4ktimer(unsigned long newval) -+{ -+ write_c0_compare(newval); -+} -+ -+/* -+ * There are a lot of conceptually broken versions of the MIPS timer interrupt -+ * handler floating around. This one is rather different, but the algorithm -+ * is provably more robust. -+ */ -+static irqreturn_t brcm_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+{ -+ unsigned int count; -+ -+ if (r4k_interval == 0) -+ goto null; -+ -+ do { -+ do_timer(regs); -+ -+ if (board_timer_interrupt) -+ board_timer_interrupt(irq, dev_id, regs); -+ -+ r4k_cur += r4k_interval; -+ ack_r4ktimer(r4k_cur); -+ -+ } while (((count = (unsigned long)read_c0_count()) -+ - r4k_cur) < 0x7fffffff); -+ -+ if (!jiffies) { -+ /* -+ * If jiffies has overflowed in this timer_interrupt we must -+ * update the timer[hi]/[lo] to make do_fast_gettimeoffset() -+ * quotient calc still valid. -arca -+ */ -+ timerhi = timerlo = 0; -+ } else { -+ /* -+ * The cycle counter is only 32 bit which is good for about -+ * a minute at current count rates of upto 150MHz or so. -+ */ -+ timerhi += (count < timerlo); /* Wrap around */ -+ timerlo = count; -+ } -+ -+ return IRQ_HANDLED; -+ -+null: -+ ack_r4ktimer(0); -+ return IRQ_NONE; -+} -+ -+static struct irqaction brcm_timer_action = { -+ .handler = brcm_timer_interrupt, -+ .flags = SA_INTERRUPT, -+ .mask = CPU_MASK_NONE, -+ .name = "timer", -+ .next = NULL, -+ .dev_id = brcm_timer_interrupt, -+}; -+ -+ -+void __init brcm_timer_setup(struct irqaction *irq) -+{ -+ r4k_cur = (read_c0_count() + r4k_interval); -+ write_c0_compare(r4k_cur); -+ -+ /* we are using the cpu counter for timer interrupts */ -+ irq->handler = no_action; /* we use our own handler */ -+ setup_irq(MIPS_TIMER_INT, &brcm_timer_action); -+ set_c0_status(IE_IRQ5); -+} -+ -+#if 0 -+/* This is for machines which generate the exact clock. */ -+#define USECS_PER_JIFFY (1000000/HZ) -+#define USECS_PER_JIFFY_FRAC (0x100000000*1000000/HZ&0xffffffff) -+ -+static void call_do_div64_32( unsigned long *res, unsigned int high, -+ unsigned int low, unsigned long base ) -+{ -+ do_div64_32(*res, high, low, base); -+} -+ -+/* -+ * FIXME: Does playing with the RP bit in c0_status interfere with this code? -+ */ -+static unsigned long do_fast_gettimeoffset(void) -+{ -+ u32 count; -+ unsigned long res, tmp; -+ -+ /* Last jiffy when do_fast_gettimeoffset() was called. */ -+ static unsigned long last_jiffies=0; -+ unsigned long quotient; -+ -+ /* -+ * Cached "1/(clocks per usec)*2^32" value. -+ * It has to be recalculated once each jiffy. -+ */ -+ static unsigned long cached_quotient=0; -+ -+ tmp = jiffies; -+ -+ quotient = cached_quotient; -+ -+ if (tmp && last_jiffies != tmp) { -+ last_jiffies = tmp; -+#ifdef CONFIG_CPU_MIPS32 -+ if (last_jiffies != 0) { -+ -+ unsigned long r0; -+ /* gcc 3.0.1 gets an internal compiler error if there are two -+ * do_div64_32 inline macros. To work around this problem, -+ * do_div64_32 is called as a function. -+ */ -+ call_do_div64_32(&r0, timerhi, timerlo, tmp); -+ call_do_div64_32("ient, USECS_PER_JIFFY, -+ USECS_PER_JIFFY_FRAC, r0); -+ -+ cached_quotient = quotient; -+ -+ } -+#else -+ __asm__(".set\tnoreorder\n\t" -+ ".set\tnoat\n\t" -+ ".set\tmips3\n\t" -+ "lwu\t%0,%2\n\t" -+ "dsll32\t$1,%1,0\n\t" -+ "or\t$1,$1,%0\n\t" -+ "ddivu\t$0,$1,%3\n\t" -+ "mflo\t$1\n\t" -+ "dsll32\t%0,%4,0\n\t" -+ "nop\n\t" -+ "ddivu\t$0,%0,$1\n\t" -+ "mflo\t%0\n\t" -+ ".set\tmips0\n\t" -+ ".set\tat\n\t" -+ ".set\treorder" -+ :"=&r" (quotient) -+ :"r" (timerhi), -+ "m" (timerlo), -+ "r" (tmp), -+ "r" (USECS_PER_JIFFY) -+ :"$1"); -+ cached_quotient = quotient; -+#endif -+ } -+ -+ /* Get last timer tick in absolute kernel time */ -+ count = read_c0_count(); -+ -+ /* .. relative to previous jiffy (32 bits is enough) */ -+ count -= timerlo; -+ -+ __asm__("multu\t%1,%2\n\t" -+ "mfhi\t%0" -+ :"=r" (res) -+ :"r" (count), -+ "r" (quotient)); -+ -+ /* -+ * Due to possible jiffies inconsistencies, we need to check -+ * the result so that we'll get a timer that is monotonic. -+ */ -+ if (res >= USECS_PER_JIFFY) -+ res = USECS_PER_JIFFY-1; -+ -+ return res; -+} -+ -+void do_gettimeofday(struct timeval *tv) -+{ -+ unsigned int flags; -+ -+ read_lock_irqsave (&xtime_lock, flags); -+ tv->tv_sec = xtime.tv_sec; -+ tv->tv_usec = xtime.tv_nsec/1000; -+ tv->tv_usec += do_fast_gettimeoffset(); -+ -+ /* -+ * xtime is atomically updated in timer_bh. jiffies - wall_jiffies -+ * is nonzero if the timer bottom half hasnt executed yet. -+ */ -+ if (jiffies - wall_jiffies) -+ tv->tv_usec += USECS_PER_JIFFY; -+ -+ read_unlock_irqrestore (&xtime_lock, flags); -+ -+ if (tv->tv_usec >= 1000000) { -+ tv->tv_usec -= 1000000; -+ tv->tv_sec++; -+ } -+} -+ -+EXPORT_SYMBOL(do_gettimeofday); -+ -+int do_settimeofday(struct timespec *tv) -+{ -+ write_lock_irq (&xtime_lock); -+ -+ /* This is revolting. We need to set the xtime.tv_usec correctly. -+ * However, the value in this location is is value at the last tick. -+ * Discover what correction gettimeofday would have done, and then -+ * undo it! -+ */ -+ tv->tv_nsec -= do_fast_gettimeoffset()*NSEC_PER_USEC; -+ -+ if (tv->tv_nsec < 0) { -+ tv->tv_nsec += 1000000*NSEC_PER_USEC; -+ tv->tv_sec--; -+ } -+ -+ xtime.tv_sec = tv->tv_sec; -+ xtime.tv_nsec = tv->tv_nsec; -+ time_adjust = 0; /* stop active adjtime() */ -+ time_status |= STA_UNSYNC; -+ time_maxerror = NTP_PHASE_LIMIT; -+ time_esterror = NTP_PHASE_LIMIT; -+ -+ write_unlock_irq (&xtime_lock); -+} -+ -+EXPORT_SYMBOL(do_settimeofday); -+ -+#endif -diff -urN linux-2.6.8.1/arch/mips/brcm-boards/generic/Makefile linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/generic/Makefile ---- linux-2.6.8.1/arch/mips/brcm-boards/generic/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/generic/Makefile 2006-06-26 09:07:08.000000000 +0200 -@@ -0,0 +1,11 @@ -+# -+# Makefile for generic Broadcom MIPS boards -+# -+# Copyright (C) 2001 Broadcom Corporation -+# -+obj-y := int-handler.o -+ -+ifdef CONFIG_REMOTE_DEBUG -+obj-y += dbg_io.o -+endif -+ -diff -urN linux-2.6.8.1/arch/mips/brcm-boards/generic/dbg_io.c linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/generic/dbg_io.c ---- linux-2.6.8.1/arch/mips/brcm-boards/generic/dbg_io.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/generic/dbg_io.c 2006-06-26 09:07:08.000000000 +0200 -@@ -0,0 +1,260 @@ -+/* -+<:copyright-gpl -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#undef PRNT /* define for debug printing */ -+ -+#define UART16550_BAUD_2400 2400 -+#define UART16550_BAUD_4800 4800 -+#define UART16550_BAUD_9600 9600 -+#define UART16550_BAUD_19200 19200 -+#define UART16550_BAUD_38400 38400 -+#define UART16550_BAUD_57600 57600 -+#define UART16550_BAUD_115200 115200 -+ -+#define UART16550_PARITY_NONE 0 -+#define UART16550_PARITY_ODD 0x08 -+#define UART16550_PARITY_EVEN 0x18 -+#define UART16550_PARITY_MARK 0x28 -+#define UART16550_PARITY_SPACE 0x38 -+ -+#define UART16550_DATA_5BIT 0x0 -+#define UART16550_DATA_6BIT 0x1 -+#define UART16550_DATA_7BIT 0x2 -+#define UART16550_DATA_8BIT 0x3 -+ -+#define UART16550_STOP_1BIT 0x0 -+#define UART16550_STOP_2BIT 0x4 -+ -+volatile Uart * stUart = UART_BASE; -+ -+#define WRITE16(addr, value) ((*(volatile UINT16 *)((ULONG)&addr)) = value) -+ -+/* Low level UART routines from promcon.c */ -+extern void prom_putc(char c); -+extern char prom_getc(void); -+extern int prom_getc_nowait(void); -+extern int prom_testc(void); -+ -+extern void set_debug_traps(void); -+extern void breakpoint(void); -+extern void enable_brcm_irq(unsigned int); -+extern void set_async_breakpoint(unsigned int epc); -+ -+#ifdef CONFIG_GDB_CONSOLE -+extern void register_gdb_console(void); -+#endif -+ -+int gdb_initialized = 0; -+ -+#define GDB_BUF_SIZE 512 /* power of 2, please */ -+ -+static char gdb_buf[GDB_BUF_SIZE] ; -+static int gdb_buf_in_inx ; -+static atomic_t gdb_buf_in_cnt ; -+static int gdb_buf_out_inx ; -+ -+void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) -+{ -+ /* Do nothing, assume boot loader has already set up serial port */ -+ printk("debugInit called\n"); -+} -+ -+/* -+ * Get a char if available, return -1 if nothing available. -+ * Empty the receive buffer first, then look at the interface hardware. -+ */ -+static int read_char(void) -+{ -+ if (atomic_read(&gdb_buf_in_cnt) != 0) /* intr routine has q'd chars */ -+ { -+ int chr ; -+ -+ chr = gdb_buf[gdb_buf_out_inx++] ; -+ gdb_buf_out_inx &= (GDB_BUF_SIZE - 1) ; -+ atomic_dec(&gdb_buf_in_cnt) ; -+ return(chr) ; -+ } -+ return(prom_getc_nowait()) ; /* read from hardware */ -+} /* read_char */ -+ -+/* -+ * This is the receiver interrupt routine for the GDB stub. -+ * It will receive a limited number of characters of input -+ * from the gdb host machine and save them up in a buffer. -+ * -+ * When the gdb stub routine getDebugChar() is called it -+ * draws characters out of the buffer until it is empty and -+ * then reads directly from the serial port. -+ * -+ * We do not attempt to write chars from the interrupt routine -+ * since the stubs do all of that via putDebugChar() which -+ * writes one byte after waiting for the interface to become -+ * ready. -+ * -+ * The debug stubs like to run with interrupts disabled since, -+ * after all, they run as a consequence of a breakpoint in -+ * the kernel. -+ * -+ * Perhaps someone who knows more about the tty driver than I -+ * care to learn can make this work for any low level serial -+ * driver. -+ */ -+static void gdb_interrupt(int irq, void *dev_id, struct pt_regs * regs) -+{ -+ int chr ; -+ int more; -+ do -+ { -+ chr = prom_getc_nowait() ; -+ more = prom_testc(); -+ if (chr < 0) continue ; -+ -+ /* If we receive a Ctrl-C then this is GDB trying to break in */ -+ if (chr == 3) -+ { -+ /* Replace current instruction with breakpoint */ -+ set_async_breakpoint(regs->cp0_epc); -+ //breakpoint(); -+ } -+ -+#ifdef PRNT -+ printk("gdb_interrupt: chr=%02x '%c', more = %x\n", -+ chr, chr > ' ' && chr < 0x7F ? chr : ' ', more) ; -+#endif -+ -+ if (atomic_read(&gdb_buf_in_cnt) >= GDB_BUF_SIZE) -+ { /* buffer overflow, clear it */ -+ gdb_buf_in_inx = 0 ; -+ atomic_set(&gdb_buf_in_cnt, 0) ; -+ gdb_buf_out_inx = 0 ; -+ break ; -+ } -+ -+ gdb_buf[gdb_buf_in_inx++] = chr ; -+ gdb_buf_in_inx &= (GDB_BUF_SIZE - 1) ; -+ atomic_inc(&gdb_buf_in_cnt) ; -+ } -+ while (more !=0); -+ -+} /* gdb_interrupt */ -+ -+/* -+ * getDebugChar -+ * -+ * This is a GDB stub routine. It waits for a character from the -+ * serial interface and then returns it. If there is no serial -+ * interface connection then it returns a bogus value which will -+ * almost certainly cause the system to hang. -+ */ -+int getDebugChar(void) -+{ -+ volatile int chr ; -+ -+#ifdef PRNT -+ printk("getDebugChar: ") ; -+#endif -+ -+ while ( (chr = read_char()) < 0 ) ; -+ -+#ifdef PRNT -+ printk("%c\n", chr > ' ' && chr < 0x7F ? chr : ' ') ; -+#endif -+ return(chr) ; -+ -+} /* getDebugChar */ -+ -+/* -+ * putDebugChar -+ * -+ * This is a GDB stub routine. It waits until the interface is ready -+ * to transmit a char and then sends it. If there is no serial -+ * interface connection then it simply returns to its caller, having -+ * pretended to send the char. -+ */ -+int putDebugChar(unsigned char chr) -+{ -+#ifdef PRNT -+ printk("putDebugChar: chr=%02x '%c'\n", chr, -+ chr > ' ' && chr < 0x7F ? chr : ' ') ; -+#endif -+ -+ prom_putc(chr) ; /* this routine will wait */ -+ return 1; -+ -+} /* putDebugChar */ -+ -+/* Just a NULL routine for testing. */ -+void gdb_null(void) -+{ -+} -+ -+void rs_kgdb_hook(int tty_no) -+{ -+ printk("rs_kgdb_hook: tty %d\n", tty_no); -+ -+ /* Call GDB routine to setup the exception vectors for the debugger */ -+ set_debug_traps(); -+ -+ printk("Breaking into debugger...\n"); -+ breakpoint(); -+ gdb_null() ; -+ printk("Connected.\n"); -+ -+ gdb_initialized = 1; -+ -+#ifdef CONFIG_GDB_CONSOLE -+ register_gdb_console(); -+#endif -+} -+ -+void kgdb_hook_irq() -+{ -+ int retval ; -+ uint16 uMask; -+ -+ printk("GDB: Hooking UART interrupt\n"); -+ -+ retval = request_irq(INTERRUPT_ID_UART, -+ gdb_interrupt, -+ SA_INTERRUPT, -+ "GDB-stub", NULL); -+ -+ if (retval != 0) -+ printk("gdb_hook: request_irq(irq=%d) failed: %d\n", INTERRUPT_ID_UART, retval); -+ -+ // Enable UART config Rx not empty IRQ -+ uMask = READ16(stUart->intMask) ; -+ // printk("intMask: 0x%x\n", uMask); -+ WRITE16(stUart->intMask, uMask | RXFIFONE); -+} -+ -+ -diff -urN linux-2.6.8.1/arch/mips/brcm-boards/generic/int-handler.S linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/generic/int-handler.S ---- linux-2.6.8.1/arch/mips/brcm-boards/generic/int-handler.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/generic/int-handler.S 2006-06-26 09:07:08.000000000 +0200 -@@ -0,0 +1,59 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * Generic interrupt handler for Broadcom MIPS boards -+ */ -+ -+#include -+ -+#include -+#include -+#include -+#include -+ -+/* -+ * MIPS IRQ Source -+ * -------- ------ -+ * 0 Software (ignored) -+ * 1 Software (ignored) -+ * 2 Combined hardware interrupt (hw0) -+ * 3 Hardware -+ * 4 Hardware -+ * 5 Hardware -+ * 6 Hardware -+ * 7 R4k timer -+ */ -+ -+ .text -+ .set noreorder -+ .set noat -+ .align 5 -+ NESTED(brcmIRQ, PT_SIZE, sp) -+ SAVE_ALL -+ CLI -+ .set noreorder -+ .set at -+ -+ jal brcm_irq_dispatch -+ move a0, sp -+ -+ j ret_from_irq -+ nop -+ -+ END(brcmIRQ) ---- linux-2.6.8.1/arch/mips/Kconfig 2004-08-14 12:55:32.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/arch/mips/Kconfig 2006-06-26 09:07:08.000000000 +0200 -@@ -27,6 +27,17 @@ - - menu "Machine selection" - -+# CONFIG_MIPS_BRCM Begin Broadcom changed code. -+ -+config MIPS_BRCM -+ bool "Support for the Broadcom boards" -+ help -+ This is a family of boards based on the Broadcom MIPS32 -+ -+source "arch/mips/brcm-boards/bcm963xx/Kconfig" -+ -+# CONFIG_MIPS_BRCM End Broadcom changed code. -+ - config MACH_JAZZ - bool "Support for the Jazz family of machines" - select ISA -@@ -146,6 +157,7 @@ - depends on MIPS32 - select DMA_NONCOHERENT - select HW_HAS_PCI -+ select SWAP_IO_SPACE - - config MIPS_COBALT - bool "Support for Cobalt Server (EXPERIMENTAL)" -@@ -198,6 +210,7 @@ - select IRQ_CPU - select MIPS_GT96100 - select RM7000_CPU_SCACHE -+ select SWAP_IO_SPACE - help - This is an evaluation board based on the Galileo GT-96100 LAN/WAN - communications controllers containing a MIPS R5000 compatible core -@@ -268,6 +281,7 @@ - bool "Support for MIPS Atlas board" - select DMA_NONCOHERENT - select HW_HAS_PCI -+ select SWAP_IO_SPACE - help - This enables support for the QED R5231-based MIPS Atlas evaluation - board. -@@ -277,6 +291,7 @@ - select HAVE_STD_PC_SERIAL_PORT - select DMA_NONCOHERENT - select HW_HAS_PCI -+ select SWAP_IO_SPACE - help - This enables support for the VR5000-based MIPS Malta evaluation - board. -@@ -294,6 +309,7 @@ - select IRQ_CPU - select IRQ_CPU_RM7K - select RM7000_CPU_SCACHE -+ select SWAP_IO_SPACE - help - The Ocelot is a MIPS-based Single Board Computer (SBC) made by - Momentum Computer . -@@ -306,6 +322,7 @@ - select IRQ_CPU_RM7K - select PCI_MARVELL - select RM7000_CPU_SCACHE -+ select SWAP_IO_SPACE - help - The Ocelot is a MIPS-based Single Board Computer (SBC) made by - Momentum Computer . -@@ -318,6 +335,7 @@ - select IRQ_MV64340 - select PCI_MARVELL - select RM7000_CPU_SCACHE -+ select SWAP_IO_SPACE - help - The Ocelot is a MIPS-based Single Board Computer (SBC) made by - Momentum Computer . -@@ -332,6 +350,7 @@ - select LIMITED_DMA - select PCI_MARVELL - select RM7000_CPU_SCACHE -+ select SWAP_IO_SPACE - help - The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by - Momentum Computer . -@@ -349,6 +368,7 @@ - select HW_HAS_PCI - select IRQ_CPU - select IRQ_CPU_RM7K -+ select SWAP_IO_SPACE - help - Yosemite is an evaluation board for the RM9000x2 processor - manufactured by PMC-Sierra -@@ -411,6 +431,7 @@ - select DMA_NONCOHERENT - select IP22_CPU_SCACHE - select IRQ_CPU -+ select SWAP_IO_SPACE - help - This are the SGI Indy, Challenge S and Indigo2, as well as certain - OEM variants like the Tandem CMN B006S. To compile a Linux kernel -@@ -529,12 +550,14 @@ - depends on SOC_AU1000 - select DMA_NONCOHERENT - select HW_HAS_PCI -+ select SWAP_IO_SPACE - - config MIPS_PB1100 - bool "PB1100 board" - depends on SOC_AU1100 - select DMA_NONCOHERENT - select HW_HAS_PCI -+ select SWAP_IO_SPACE - - config MIPS_PB1500 - bool "PB1500 board" -@@ -596,6 +619,7 @@ - bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)" - depends on EXPERIMENTAL - select DMA_COHERENT -+ select SWAP_IO_SPACE - - choice - prompt "BCM1xxx SOC-based board" -@@ -818,6 +842,7 @@ - select DMA_NONCOHERENT - select HW_HAS_PCI - select ISA -+ select SWAP_IO_SPACE - - config RWSEM_GENERIC_SPINLOCK - bool -@@ -934,8 +959,6 @@ - - config SWAP_IO_SPACE - bool -- depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 || SIBYTE_SB1xxx_SOC || SGI_IP22 || MOMENCO_OCELOT_C || MOMENCO_OCELOT_G || MOMENCO_OCELOT || MOMENCO_JAGUAR_ATX || MIPS_MALTA || MIPS_ATLAS || MIPS_EV96100 || MIPS_PB1100 || MIPS_PB1000 -- default y - - # - # Unfortunately not all GT64120 systems run the chip at the same clock. ---- linux-2.6.8.1/arch/mips/kernel/cpu-probe.c 2004-08-14 12:55:10.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/arch/mips/kernel/cpu-probe.c 2006-06-26 09:07:09.000000000 +0200 -@@ -538,6 +538,27 @@ - } - } - -+#if defined(CONFIG_MIPS_BRCM) -+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) -+{ -+ decode_config1(c); -+ switch (c->processor_id & 0xff00) { -+ case PRID_IMP_BCM6338: -+ c->cputype = CPU_BCM6338; -+ break; -+ case PRID_IMP_BCM6345: -+ c->cputype = CPU_BCM6345; -+ break; -+ case PRID_IMP_BCM6348: -+ c->cputype = CPU_BCM6348; -+ break; -+ default: -+ c->cputype = CPU_UNKNOWN; -+ break; -+ } -+} -+#endif -+ - static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c) - { - decode_config1(c); -@@ -576,6 +597,11 @@ - case PRID_COMP_SIBYTE: - cpu_probe_sibyte(c); - break; -+#if defined(CONFIG_MIPS_BRCM) -+ case PRID_COMP_BROADCOM: -+ cpu_probe_broadcom(c); -+ break; -+#endif - - case PRID_COMP_SANDCRAFT: - cpu_probe_sandcraft(c); ---- linux-2.6.8.1/arch/mips/kernel/gdb-stub.c 2004-08-14 12:56:23.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/arch/mips/kernel/gdb-stub.c 2006-06-26 09:07:09.000000000 +0200 -@@ -171,6 +171,8 @@ - static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault); - void handle_exception(struct gdb_regs *regs); - -+int kgdb_enabled; -+ - /* - * spin locks for smp case - */ ---- linux-2.6.8.1/arch/mips/kernel/irq.c 2004-08-14 12:54:50.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/arch/mips/kernel/irq.c 2006-06-26 09:07:09.000000000 +0200 -@@ -30,12 +30,7 @@ - /* - * Controller mappings for all interrupt sources: - */ --irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = { -- [0 ... NR_IRQS-1] = { -- .handler = &no_irq_type, -- .lock = SPIN_LOCK_UNLOCKED -- } --}; -+irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned; - - static void register_irq_proc (unsigned int irq); - -@@ -809,7 +804,20 @@ - return 0; - } - --void __init init_generic_irq(void) -+#ifdef CONFIG_KGDB -+extern void breakpoint(void); -+extern void set_debug_traps(void); -+ -+static int kgdb_flag = 1; -+static int __init nokgdb(char *str) -+{ -+ kgdb_flag = 0; -+ return 1; -+} -+__setup("nokgdb", nokgdb); -+#endif -+ -+void __init init_IRQ(void) - { - int i; - -@@ -818,7 +826,18 @@ - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].handler = &no_irq_type; -+ irq_desc[i].lock = SPIN_LOCK_UNLOCKED; -+ } -+ -+ arch_init_irq(); -+ -+#ifdef CONFIG_KGDB -+ if (kgdb_flag) { -+ printk("Wait for gdb client connection ...\n"); -+ set_debug_traps(); -+ breakpoint(); - } -+#endif - } - - EXPORT_SYMBOL(disable_irq_nosync); -@@ -833,7 +852,7 @@ - - static struct proc_dir_entry * smp_affinity_entry [NR_IRQS]; - --static cpumask_t irq_affinity [NR_IRQS] = { [0 ... NR_IRQS-1] = ~0UL }; -+static cpumask_t irq_affinity [NR_IRQS] = { [0 ... NR_IRQS-1] = CPU_MASK_ALL }; - static int irq_affinity_read_proc (char *page, char **start, off_t off, - int count, int *eof, void *data) - { ---- linux-2.6.8.1/arch/mips/kernel/Makefile 2004-08-14 12:55:19.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/arch/mips/kernel/Makefile 2006-06-26 09:07:09.000000000 +0200 -@@ -8,6 +8,13 @@ - ptrace.o reset.o semaphore.o setup.o signal.o syscall.o \ - time.o traps.o unaligned.o - -+# CONFIG_MIPS_BRCM Begin Broadcom added code. -+# gcc 3.4.x reorders code with -Os and -O2, breaking the save_static stuff. -+CFLAGS_syscall.o := -O1 -+CFLAGS_signal.o := -O1 -+CFLAGS_signal32.o := -O1 -+# CONFIG_MIPS_BRCM End Broadcom added code. -+ - ifdef CONFIG_MODULES - obj-y += mips_ksyms.o module.o - obj-$(CONFIG_MIPS32) += module-elf32.o ---- linux-2.6.8.1/arch/mips/kernel/proc.c 2004-08-14 12:55:09.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/arch/mips/kernel/proc.c 2006-06-26 09:07:09.000000000 +0200 -@@ -75,6 +75,11 @@ - [CPU_VR4133] "NEC VR4133", - [CPU_VR4181] "NEC VR4181", - [CPU_VR4181A] "NEC VR4181A", -+#if defined(CONFIG_MIPS_BRCM) -+ [CPU_BCM6338] "BCM6338", -+ [CPU_BCM6345] "BCM6345", -+ [CPU_BCM6348] "BCM6348", -+#endif - [CPU_SR71000] "Sandcraft SR71000" - }; - ---- linux-2.6.8.1/arch/mips/kernel/scall32-o32.S 2004-08-14 12:54:49.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/arch/mips/kernel/scall32-o32.S 2006-06-26 12:42:05.000000000 +0200 -@@ -640,9 +640,9 @@ - syscalltable - .size sys_call_table, . - sys_call_table - -- .macro sys function, nargs -+ /*.macro sys function, nargs - .byte \nargs -- .endm -+ .endm*/ - - sys_narg_table: - syscalltable ---- linux-2.6.8.1/arch/mips/kernel/time.c 2004-08-14 12:55:20.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/arch/mips/kernel/time.c 2006-06-26 09:07:09.000000000 +0200 -@@ -274,11 +274,15 @@ - - /* .. relative to previous jiffy (32 bits is enough) */ - count -= timerlo; -- -+ - __asm__("multu %1,%2" - : "=h" (res) - : "r" (count), "r" (sll32_usecs_per_cycle) -+#if defined(CONFIG_MIPS_BRCM) -+ : "lo"); -+#else - : "lo", "accum"); -+#endif - - /* - * Due to possible jiffies inconsistencies, we need to check -@@ -333,7 +337,11 @@ - __asm__("multu %1,%2" - : "=h" (res) - : "r" (count), "r" (quotient) -+#if defined(CONFIG_MIPS_BRCM) -+ : "lo"); -+#else - : "lo", "accum"); -+#endif - - /* - * Due to possible jiffies inconsistencies, we need to check -@@ -375,7 +383,11 @@ - : "r" (timerhi), "m" (timerlo), - "r" (tmp), "r" (USECS_PER_JIFFY), - "r" (USECS_PER_JIFFY_FRAC) -+#if defined(CONFIG_MIPS_BRCM) -+ : "hi", "lo"); -+#else - : "hi", "lo", "accum"); -+#endif - cached_quotient = quotient; - } - } -@@ -389,7 +401,11 @@ - __asm__("multu %1,%2" - : "=h" (res) - : "r" (count), "r" (quotient) -+#if defined(CONFIG_MIPS_BRCM) -+ : "lo"); -+#else - : "lo", "accum"); -+#endif - - /* - * Due to possible jiffies inconsistencies, we need to check -@@ -738,6 +754,7 @@ - board_timer_setup(&timer_irqaction); - } - -+ - #define FEBRUARY 2 - #define STARTOFTIME 1970 - #define SECDAY 86400L ---- linux-2.6.8.1/arch/mips/kernel/traps.c 2004-08-14 12:55:20.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/arch/mips/kernel/traps.c 2006-06-26 09:07:09.000000000 +0200 -@@ -246,6 +246,13 @@ - - static spinlock_t die_lock = SPIN_LOCK_UNLOCKED; - -+#if defined(CONFIG_MIPS_BRCM) -+#ifdef CONFIG_REMOTE_DEBUG -+#include -+extern void handle_exception(struct gdb_regs *regs); -+#endif -+#endif -+ - NORET_TYPE void __die(const char * str, struct pt_regs * regs, - const char * file, const char * func, unsigned long line) - { -@@ -258,7 +265,33 @@ - printk(" in %s:%s, line %ld", file, func, line); - printk("[#%d]:\n", ++die_counter); - show_registers(regs); -+#if defined(CONFIG_MIPS_BRCM) -+#ifdef CONFIG_REMOTE_DEBUG -+ { -+ struct gdb_regs regs2; -+ int i; -+ long *ptr; -+ -+ ptr = ®s2.reg0; -+ /* Copy registers to GDB structure */ -+ for(i=0; i<32;i++) -+ *ptr++ = regs->regs[i]; -+ -+ regs2.lo = regs->lo; -+ regs2.hi = regs->hi; -+ regs2.cp0_epc = regs->cp0_epc; -+ regs2.cp0_badvaddr = regs->cp0_badvaddr; -+ regs2.cp0_status = regs->cp0_status; -+ regs2.cp0_cause = regs->cp0_cause; -+ -+ handle_exception(®s2); /* Break to GDB */ -+ } -+#endif -+#endif - spin_unlock_irq(&die_lock); -+ /* Ron add for kernel crash */ -+ (*(volatile unsigned int *)(0xfffe040c)) &= ~(1<<5); -+ machine_restart(NULL); - do_exit(SIGSEGV); - } - ---- linux-2.6.8.1/arch/mips/Makefile 2004-08-14 12:54:47.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/arch/mips/Makefile 2006-06-26 09:07:09.000000000 +0200 -@@ -41,8 +41,14 @@ - endif - - ifdef CONFIG_CROSSCOMPILE -+# CONFIG_MIPS_BRCM Begin Broadcom added code. -+ifdef CONFIG_MIPS_BRCM -+CROSS_COMPILE := mips-linux-uclibc-#$(tool-prefix) -+else - CROSS_COMPILE := $(tool-prefix) - endif -+# CONFIG_MIPS_BRCM End Broadcom added code. -+endif - - # - # GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel -@@ -57,6 +63,9 @@ - cflags-y := -I $(TOPDIR)/include/asm/gcc - cflags-y += -G 0 -mno-abicalls -fno-pic -pipe - cflags-y += $(call check_gcc, -finline-limit=100000,) -+ifeq ($(strip $(JTAG_KERNEL_DEBUG)),y) -+cflags-y += -g -+endif - LDFLAGS_vmlinux += -G 0 -static -n - MODFLAGS += -mlong-calls - -@@ -64,6 +73,12 @@ - - check_warning = $(shell if $(CC) $(1) -c -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi) - -+# CONFIG_MIPS_BRCM Begin Broadcom changed code. -+ifdef CONFIG_MIPS_BRCM -+cflags-$(CONFIG_REMOTE_DEBUG) += -ggdb -+endif -+# CONFIG_MIPS_BRCM End Broadcom changed code. -+ - # - # Use: $(call set_gccflags,,,,,) - # -@@ -302,6 +317,20 @@ - libs-$(CONFIG_BAGET_MIPS) += arch/mips/baget/ arch/mips/baget/prom/ - load-$(CONFIG_BAGET_MIPS) += 0x80001000 - -+# CONFIG_MIPS_BRCM Begin Broadcom added code. -+ifdef CONFIG_MIPS_BRCM -+# -+# Broadcom board -+core-$(CONFIG_BCM96338) += arch/mips/brcm-boards/generic/ arch/mips/brcm-boards/bcm963xx/ -+cflags-$(CONFIG_BCM96338) += -Iinclude/asm-mips/mach-bcm963xx -+core-$(CONFIG_BCM96345) += arch/mips/brcm-boards/generic/ arch/mips/brcm-boards/bcm963xx/ -+cflags-$(CONFIG_BCM96345) += -Iinclude/asm-mips/mach-bcm963xx -+core-$(CONFIG_BCM96348) += arch/mips/brcm-boards/generic/ arch/mips/brcm-boards/bcm963xx/ -+cflags-$(CONFIG_BCM96348) += -Iinclude/asm-mips/mach-bcm963xx -+load-$(CONFIG_MIPS_BRCM) += 0x80010000 -+endif -+# CONFIG_MIPS_BRCM End Broadcom added code. -+ - # - # Cobalt Server - # ---- linux-2.6.8.1/arch/mips/mm/c-r4k.c 2004-08-14 12:56:22.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/arch/mips/mm/c-r4k.c 2006-06-26 09:07:09.000000000 +0200 -@@ -86,7 +86,7 @@ - - static void (* r4k_blast_dcache)(void); - --static void r4k_blast_dcache_setup(void) -+static inline void r4k_blast_dcache_setup(void) - { - unsigned long dc_lsize = cpu_dcache_line_size(); - -@@ -385,6 +385,7 @@ - static void r4k_flush_icache_range(unsigned long start, unsigned long end) - { - unsigned long dc_lsize = current_cpu_data.dcache.linesz; -+ unsigned long ic_lsize = current_cpu_data.icache.linesz; - unsigned long addr, aend; - - if (!cpu_has_ic_fills_f_dc) { -@@ -407,14 +408,14 @@ - if (end - start > icache_size) - r4k_blast_icache(); - else { -- addr = start & ~(dc_lsize - 1); -- aend = (end - 1) & ~(dc_lsize - 1); -+ addr = start & ~(ic_lsize - 1); -+ aend = (end - 1) & ~(ic_lsize - 1); - while (1) { - /* Hit_Invalidate_I */ - protected_flush_icache_line(addr); - if (addr == aend) - break; -- addr += dc_lsize; -+ addr += ic_lsize; - } - } - } -@@ -802,6 +803,13 @@ - if (!(config & MIPS_CONF_M)) - panic("Don't know how to probe P-caches on this cpu."); - -+#if defined(CONFIG_MIPS_BRCM) -+ if (c->cputype == CPU_BCM6338 || c->cputype == CPU_BCM6345 || c->cputype == CPU_BCM6348){ -+ printk("brcm mips: enabling icache and dcache...\n"); -+ /* Enable caches */ -+ write_c0_diag(read_c0_diag() | 0xC0000000); -+ } -+#endif - /* - * So we seem to be a MIPS32 or MIPS64 CPU - * So let's probe the I-cache ... ---- linux-2.6.8.1/arch/mips/pci/fixup-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/arch/mips/pci/fixup-bcm96348.c 2006-06-26 09:07:09.000000000 +0200 -@@ -0,0 +1,85 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); -+ -+static char irq_tab_bcm96348[] __initdata = { -+ [0] = INTERRUPT_ID_MPI, -+ [1] = INTERRUPT_ID_MPI, -+#if defined(CONFIG_USB) -+ [USB_HOST_SLOT] = INTERRUPT_ID_USBH -+#endif -+}; -+ -+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ return irq_tab_bcm96348[slot]; -+} -+ -+static void bcm96348_fixup(struct pci_dev *dev) -+{ -+ uint32 memaddr; -+ uint32 size; -+ -+ memaddr = pci_resource_start(dev, 0); -+ size = pci_resource_len(dev, 0); -+ -+ switch (PCI_SLOT(dev->devfn)) { -+ case 0: -+ // UBUS to PCI address range -+ // Memory Window 1. Mask determines which bits are decoded. -+ mpi->l2pmrange1 = ~(size-1); -+ // UBUS to PCI Memory base address. This is akin to the ChipSelect base -+ // register. -+ mpi->l2pmbase1 = memaddr & BCM_PCI_ADDR_MASK; -+ // UBUS to PCI Remap Address. Replaces the masked address bits in the -+ // range register with this setting. -+ // Also, enable direct I/O and direct Memory accesses -+ mpi->l2pmremap1 = (memaddr | MEM_WINDOW_EN); -+ break; -+ -+ case 1: -+ // Memory Window 2 -+ mpi->l2pmrange2 = ~(size-1); -+ // UBUS to PCI Memory base address. -+ mpi->l2pmbase2 = memaddr & BCM_PCI_ADDR_MASK; -+ // UBUS to PCI Remap Address -+ mpi->l2pmremap2 = (memaddr | MEM_WINDOW_EN); -+ break; -+ -+#if defined(CONFIG_USB) -+ case USB_HOST_SLOT: -+ dev->resource[0].start = USB_HOST_BASE; -+ dev->resource[0].end = USB_HOST_BASE+USB_BAR0_MEM_SIZE-1; -+ break; -+#endif -+ } -+} -+ -+struct pci_fixup pcibios_fixups[] = { -+ { PCI_FIXUP_FINAL, PCI_ANY_ID, PCI_ANY_ID, bcm96348_fixup }, -+ {0} -+}; ---- linux-2.6.8.1/arch/mips/pci/ops-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/arch/mips/pci/ops-bcm96348.c 2006-06-26 09:07:09.000000000 +0200 -@@ -0,0 +1,276 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+ -+#if defined(CONFIG_USB) -+#if 0 -+#define DPRINT(x...) printk(x) -+#else -+#define DPRINT(x...) -+#endif -+ -+static int -+pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size); -+static int -+pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size); -+ -+static bool usb_mem_size_rd = FALSE; -+static uint32 usb_mem_base = 0; -+static uint32 usb_cfg_space_cmd_reg = 0; -+#endif -+static bool pci_mem_size_rd = FALSE; -+ -+static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); -+ -+static void mpi_SetupPciConfigAccess(uint32 addr) -+{ -+ mpi->l2pcfgctl = (DIR_CFG_SEL | DIR_CFG_USEREG | addr) & ~CONFIG_TYPE; -+} -+ -+static void mpi_ClearPciConfigAccess(void) -+{ -+ mpi->l2pcfgctl = 0x00000000; -+} -+ -+#if defined(CONFIG_USB) -+/* -------------------------------------------------------------------------- -+ Name: pci63xx_int_write -+Abstract: PCI Config write on internal device(s) -+ -------------------------------------------------------------------------- */ -+static int -+pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size) -+{ -+ if (PCI_SLOT(devfn) != USB_HOST_SLOT) { -+ return PCIBIOS_SUCCESSFUL; -+ } -+ -+ switch (size) { -+ case 1: -+ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %02X\n", -+ PCI_SLOT(devfn), where, size, *value); -+ break; -+ case 2: -+ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %04X\n", -+ PCI_SLOT(devfn), where, size, *value); -+ switch (where) { -+ case PCI_COMMAND: -+ usb_cfg_space_cmd_reg = *value; -+ break; -+ default: -+ break; -+ } -+ break; -+ case 4: -+ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %08lX\n", -+ PCI_SLOT(devfn), where, size, *value); -+ switch (where) { -+ case PCI_BASE_ADDRESS_0: -+ if (*value == 0xffffffff) { -+ usb_mem_size_rd = TRUE; -+ } else { -+ usb_mem_base = *value; -+ } -+ break; -+ default: -+ break; -+ } -+ break; -+ default: -+ break; -+ } -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+/* -------------------------------------------------------------------------- -+ Name: pci63xx_int_read -+Abstract: PCI Config read on internal device(s) -+ -------------------------------------------------------------------------- */ -+static int -+pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size) -+{ -+ uint32 retValue = 0xFFFFFFFF; -+ -+ if (PCI_SLOT(devfn) != USB_HOST_SLOT) { -+ return PCIBIOS_SUCCESSFUL; -+ } -+ -+ // For now, this is specific to the USB Host controller. We can -+ // make it more general if we have to... -+ // Emulate PCI Config accesses -+ switch (where) { -+ case PCI_VENDOR_ID: -+ case PCI_DEVICE_ID: -+ retValue = PCI_VENDOR_ID_BROADCOM | 0x63000000; -+ break; -+ case PCI_COMMAND: -+ case PCI_STATUS: -+ retValue = (0x0006 << 16) | usb_cfg_space_cmd_reg; -+ break; -+ case PCI_CLASS_REVISION: -+ case PCI_CLASS_DEVICE: -+ retValue = (PCI_CLASS_SERIAL_USB << 16) | (0x10 << 8) | 0x01; -+ break; -+ case PCI_BASE_ADDRESS_0: -+ if (usb_mem_size_rd) { -+ retValue = USB_BAR0_MEM_SIZE; -+ } else { -+ if (usb_mem_base != 0) -+ retValue = usb_mem_base; -+ else -+ retValue = USB_HOST_BASE; -+ } -+ usb_mem_size_rd = FALSE; -+ break; -+ case PCI_CACHE_LINE_SIZE: -+ case PCI_LATENCY_TIMER: -+ retValue = 0; -+ break; -+ case PCI_HEADER_TYPE: -+ retValue = PCI_HEADER_TYPE_NORMAL; -+ break; -+ case PCI_SUBSYSTEM_VENDOR_ID: -+ retValue = PCI_VENDOR_ID_BROADCOM; -+ break; -+ case PCI_SUBSYSTEM_ID: -+ retValue = 0x6300; -+ break; -+ case PCI_INTERRUPT_LINE: -+ retValue = INTERRUPT_ID_USBH; -+ break; -+ default: -+ break; -+ } -+ -+ switch (size) { -+ case 1: -+ *value = (retValue >> ((where & 3) << 3)) & 0xff; -+ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %02X\n", -+ PCI_SLOT(devfn), where, size, *value); -+ break; -+ case 2: -+ *value = (retValue >> ((where & 3) << 3)) & 0xffff; -+ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %04X\n", -+ PCI_SLOT(devfn), where, size, *value); -+ break; -+ case 4: -+ *value = retValue; -+ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %08lX\n", -+ PCI_SLOT(devfn), where, size, *value); -+ break; -+ default: -+ break; -+ } -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+#endif -+ -+static int bcm96348_pcibios_read(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 * val) -+{ -+ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1); -+ uint32 data; -+ -+#if defined(CONFIG_USB) -+ if (PCI_SLOT(devfn) == USB_HOST_SLOT) -+ return pci63xx_int_read(devfn, where, val, size); -+#endif -+ -+ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where)); -+ data = *(uint32 *)ioBase; -+ switch(size) { -+ case 1: -+ *val = (data >> ((where & 3) << 3)) & 0xff; -+ break; -+ case 2: -+ *val = (data >> ((where & 3) << 3)) & 0xffff; -+ break; -+ case 4: -+ *val = data; -+ /* Special case for reading PCI device range */ -+ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) { -+ if (pci_mem_size_rd) { -+ /* bcm6348 PCI memory window minimum size is 64K */ -+ *val &= PCI_SIZE_64K; -+ } -+ } -+ break; -+ default: -+ break; -+ } -+ pci_mem_size_rd = FALSE; -+ mpi_ClearPciConfigAccess(); -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static int bcm96348_pcibios_write(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 val) -+{ -+ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1); -+ uint32 data; -+ -+#if defined(CONFIG_USB) -+ if (PCI_SLOT(devfn) == USB_HOST_SLOT) -+ return pci63xx_int_write(devfn, where, &val, size); -+#endif -+ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where)); -+ data = *(uint32 *)ioBase; -+ switch(size) { -+ case 1: -+ data = (data & ~(0xff << ((where & 3) << 3))) | -+ (val << ((where & 3) << 3)); -+ break; -+ case 2: -+ data = (data & ~(0xffff << ((where & 3) << 3))) | -+ (val << ((where & 3) << 3)); -+ break; -+ case 4: -+ data = val; -+ /* Special case for reading PCI device range */ -+ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) { -+ if (val == 0xffffffff) -+ pci_mem_size_rd = TRUE; -+ } -+ break; -+ default: -+ break; -+ } -+ *(uint32 *)ioBase = data; -+ udelay(500); -+ mpi_ClearPciConfigAccess(); -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+struct pci_ops bcm96348_pci_ops = { -+ .read = bcm96348_pcibios_read, -+ .write = bcm96348_pcibios_write -+}; ---- linux-2.6.8.1/arch/mips/pci/Makefile 2004-08-14 12:54:47.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/arch/mips/pci/Makefile 2006-06-26 09:07:09.000000000 +0200 -@@ -17,6 +17,8 @@ - obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o - obj-$(CONFIG_MIPS_TX3927) += ops-jmr3927.o - obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o -+obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o -+obj-$(CONFIG_BCM_PCI) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o - - # - # These are still pretty much in the old state, watch, go blind. -@@ -51,3 +53,7 @@ - obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o ops-tx4927.o - obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o - obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o -+ -+ifeq "$(CONFIG_BCM_PCI)" "y" -+EXTRA_CFLAGS += -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD) -+endif ---- linux-2.6.8.1/arch/mips/pci/pci-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/arch/mips/pci/pci-bcm96348.c 2006-06-26 09:07:09.000000000 +0200 -@@ -0,0 +1,54 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+static struct resource bcm_pci_io_resource = { -+ .name = "bcm96348 pci IO space", -+ .start = BCM_PCI_IO_BASE, -+ .end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB - 1, -+ .flags = IORESOURCE_IO -+}; -+ -+static struct resource bcm_pci_mem_resource = { -+ .name = "bcm96348 pci memory space", -+ .start = BCM_PCI_MEM_BASE, -+ .end = BCM_PCI_MEM_BASE + BCM_PCI_MEM_SIZE_16MB - 1, -+ .flags = IORESOURCE_MEM -+}; -+ -+extern struct pci_ops bcm96348_pci_ops; -+ -+struct pci_controller bcm96348_controller = { -+ .pci_ops = &bcm96348_pci_ops, -+ .io_resource = &bcm_pci_io_resource, -+ .mem_resource = &bcm_pci_mem_resource, -+}; -+ -+static void bcm96348_pci_init(void) -+{ -+ register_pci_controller(&bcm96348_controller); -+} -+ -+arch_initcall(bcm96348_pci_init); ---- linux-2.6.8.1/drivers/mtd/maps/bcm963xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/drivers/mtd/maps/bcm963xx.c 2006-06-26 09:07:13.000000000 +0200 -@@ -0,0 +1,162 @@ -+/* -+ * A simple flash mapping code for BCM963xx board flash memory -+ * It is simple because it only treats all the flash memory as ROM -+ * It is used with chips/map_rom.c -+ * -+ * Song Wang (songw@broadcom.com) -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#define VERSION "1.0" -+ -+ -+extern PFILE_TAG kerSysImageTagGet(void); -+ -+static struct mtd_info *mymtd; -+static struct mtd_partition brcm_partition_info[4]; -+ -+#define CFE_ADDR 0xbfc00000 -+#define CFE_SIZE 64 << 10 -+#define FLASH_2M_SIZE 2048 << 10 -+#define FLASH_4M_SIZE 4096 << 10 -+#define NVRAM_SIZE 64 << 10 -+#define TAG_SIZE 0x100 -+#define FS_KERNEL_SIZE_4M 0x3E0000 -+#define NVRAM_ADDR_4M 0x3F0000 -+ -+static map_word brcm_physmap_read16(struct map_info *map, unsigned long ofs) -+{ -+ map_word val; -+ -+ val.x[0] = __raw_readw(map->map_priv_1 + ofs); -+ -+ return val; -+} -+ -+void brcm_physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -+{ -+ memcpy_fromio(to, map->map_priv_1 + from, len); -+} -+ -+static void brcm_physmap_write16(struct map_info *map, __u16 d, unsigned long adr) -+{ -+ __raw_writew(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void brcm_physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -+{ -+ memcpy_toio(map->map_priv_1 + to, from, len); -+} -+ -+struct map_info brcm_physmap_map = { -+ .name = "Physically mapped flash", -+ .bankwidth = 2, -+ .read = brcm_physmap_read16, -+ .copy_from = brcm_physmap_copy_from, -+ .write = brcm_physmap_write16, -+ .copy_to = brcm_physmap_copy_to -+ -+}; -+ -+ -+ -+int __init init_brcm_physmap(void) -+{ -+ PFILE_TAG pTag = NULL; -+ u_int32_t rootfs_addr, kernel_addr,fs_len,cfe_len; -+ FLASH_ADDR_INFO info; -+ -+ kerSysFlashAddrInfoGet( &info ); -+ -+ /* Read the flash memory map from flash memory. */ -+ if (!(pTag = kerSysImageTagGet())) { -+ printk("Failed to read image tag from flash\n"); -+ return -EIO; -+ } -+ -+ rootfs_addr = (u_int32_t) simple_strtoul(pTag->rootfsAddress, NULL, 10); -+ kernel_addr = (u_int32_t) simple_strtoul(pTag->kernelAddress, NULL, 10); -+ -+ -+ brcm_physmap_map.size = FLASH_4M_SIZE; -+ -+ fs_len = kernel_addr - rootfs_addr; -+ cfe_len=CFE_SIZE; -+ /* Ron mapping from fs */ -+ brcm_physmap_map.map_priv_1 = (unsigned long)CFE_ADDR; -+ -+ if (!brcm_physmap_map.map_priv_1) { -+ printk("Wrong flash starting address\n"); -+ return -EIO; -+ } -+ -+ if (brcm_physmap_map.size <= 0) { -+ printk("Wrong flash size\n"); -+ return -EIO; -+ } -+ -+ mymtd = do_map_probe("cfi_probe", &brcm_physmap_map); -+ if (!mymtd) -+ return -EIO; -+ -+ mymtd->owner = THIS_MODULE; -+ /* Ron file system */ -+ brcm_partition_info[0].name = "fs"; -+ brcm_partition_info[0].offset = (cfe_len + TAG_SIZE); -+ brcm_partition_info[0].size = fs_len; -+ brcm_partition_info[0].mask_flags = 0; -+ -+ /* Ron tag + file system + kernel */ -+ brcm_partition_info[1].name = "tag+fs+kernel"; -+ brcm_partition_info[1].offset = cfe_len; -+ brcm_partition_info[1].size = FS_KERNEL_SIZE_4M; -+ brcm_partition_info[1].mask_flags = 0; -+ -+ /* Ron bootloader */ -+ brcm_partition_info[2].name = "bootloader"; -+ brcm_partition_info[2].offset = 0x00; -+ brcm_partition_info[2].size = cfe_len; -+ brcm_partition_info[2].mask_flags = 0; -+ -+ /* Ron nvram */ -+ brcm_partition_info[3].name = "nvram"; -+ brcm_partition_info[3].offset = NVRAM_ADDR_4M; -+ brcm_partition_info[3].size = NVRAM_SIZE; -+ brcm_partition_info[3].mask_flags = 0; -+ -+ add_mtd_partitions(mymtd, brcm_partition_info, 4); -+ -+ return 0; -+ -+} -+ -+static void __exit cleanup_brcm_physmap(void) -+{ -+if (mymtd) { -+ del_mtd_partitions(mymtd); -+ del_mtd_device(mymtd); -+ map_destroy(mymtd); -+} -+if (brcm_physmap_map.map_priv_1) { -+ brcm_physmap_map.map_priv_1 = 0; -+} -+} -+ -+module_init(init_brcm_physmap); -+module_exit(cleanup_brcm_physmap); -+ -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Song Wang songw@broadcom.com"); -+MODULE_DESCRIPTION("Configurable MTD map driver for read-only root file system"); ---- linux-2.6.8.1/drivers/mtd/maps/Makefile 2004-08-14 12:54:46.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/drivers/mtd/maps/Makefile 2006-06-26 09:07:13.000000000 +0200 -@@ -39,13 +39,13 @@ - obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o - obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o - obj-$(CONFIG_MTD_OCELOT) += ocelot.o -+obj-$(CONFIG_MTD_LASAT) += lasat.o - obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o - obj-$(CONFIG_MTD_PCI) += pci.o --obj-$(CONFIG_MTD_PB1XXX) += pb1xxx-flash.o --obj-$(CONFIG_MTD_DB1X00) += db1x00-flash.o --obj-$(CONFIG_MTD_PB1550) += pb1550-flash.o --obj-$(CONFIG_MTD_DB1550) += db1550-flash.o - obj-$(CONFIG_MTD_LASAT) += lasat.o -+obj-$(CONFIG_MTD_DB1X00) += db1x00-flash.o -+obj-$(CONFIG_MTD_PB1550) += pb1550-flash.o -+obj-$(CONFIG_MTD_DB1550) += db1550-flash.o - obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o - obj-$(CONFIG_MTD_EDB7312) += edb7312.o - obj-$(CONFIG_MTD_IMPA7) += impa7.o -@@ -64,3 +64,11 @@ - obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o - obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o - obj-$(CONFIG_MTD_DMV182) += dmv182.o -+obj-$(CONFIG_MTD_PB1000) += pb1xxx-flash.o -+obj-$(CONFIG_MTD_PB1100) += pb1xxx-flash.o -+obj-$(CONFIG_MTD_PB1500) += pb1xxx-flash.o -+obj-$(CONFIG_MTD_DB1X00) += db1x00-flash.o -+# CONFIG_MIPS_BRCM Begin Broadcom changed code. -+obj-$(CONFIG_MTD_BCM963XX) += bcm963xx.o -+EXTRA_CFLAGS += -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD) -+# CONFIG_MIPS_BRCM End Broadcom changed code. ---- linux-2.6.8.1/drivers/mtd/maps/Kconfig 2004-08-14 12:56:23.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/drivers/mtd/maps/Kconfig 2006-06-26 09:07:13.000000000 +0200 -@@ -60,6 +60,12 @@ - Ignore this option if you use run-time physmap configuration - (i.e., run-time calling physmap_configure()). - -+config MTD_BCM963XX -+ tristate "Broadcom 963xx ADSL board flash memory support" -+ depends on MIPS_BRCM -+ help -+ Broadcom 963xx ADSL board flash memory -+ - config MTD_SUN_UFLASH - tristate "Sun Microsystems userflash support" - depends on (SPARC32 || SPARC64) && MTD_CFI -@@ -182,41 +188,12 @@ - help - Support for the flash chip on Tsunami TIG bus. - --config MTD_LASAT -- tristate "Flash chips on LASAT board" -- depends on LASAT -- help -- Support for the flash chips on the Lasat 100 and 200 boards. -- - config MTD_NETtel - tristate "CFI flash device on SnapGear/SecureEdge" - depends on X86 && MTD_PARTITIONS && MTD_JEDECPROBE - help - Support for flash chips on NETtel/SecureEdge/SnapGear boards. - --config MTD_PB1XXX -- tristate "Flash devices on Alchemy PB1xxx boards" -- depends on MIPS && ( MIPS_PB1000 || MIPS_PB1100 || MIPS_PB1500 ) -- help -- Flash memory access on Alchemy Pb1000/Pb1100/Pb1500 boards -- --config MTD_PB1XXX_BOOT -- bool "PB1x00 boot flash device" -- depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 ) -- help -- Use the first of the two 32MiB flash banks on Pb1100/Pb1500 board. -- You can say 'Y' to both this and 'MTD_PB1XXX_USER' below, to use -- both banks. -- --config MTD_PB1XXX_USER -- bool "PB1x00 user flash device" -- depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 ) -- default y if MTD_PB1XX_BOOT = n -- help -- Use the second of the two 32MiB flash banks on Pb1100/Pb1500 board. -- You can say 'Y' to both this and 'MTD_PB1XXX_BOOT' above, to use -- both banks. -- - config MTD_PB1550 - tristate "Flash devices on Alchemy PB1550 board" - depends on MIPS && MIPS_PB1550 -@@ -338,6 +315,80 @@ - Mapping for the Flaga digital module. If you don´t have one, ignore - this setting. - -+config MTD_PB1000 -+ tristate "Pb1000 Boot Flash device" -+ depends on MIPS && MIPS_PB1000 -+ help -+ Flash memory access on Alchemy Pb1000 -+ -+config MTD_PB1100 -+ tristate "Pb1100 Flash device" -+ depends on MIPS && MIPS_PB1100 -+ help -+ Flash memory access on Alchemy Pb1100 -+ -+config MTD_PB1500 -+ tristate "Pb1500 Flash device" -+ depends on MIPS && MIPS_PB1500 -+ help -+ Flash memory access on Alchemy Pb1500 -+ -+config MTD_PB1500_BOOT -+ bool "Pb1100/Pb1500 Boot Flash device" -+ depends on MIPS && (MTD_PB1500 || MTD_PB1100) -+ help -+ Use the first of the two 32MB flash banks on Pb1100/Pb1500 board. -+ You can say 'Y' to both this and the USER flash option, to use -+ both banks. -+ -+config MTD_PB1500_USER -+ bool "Pb1100/Pb1500 User Flash device (2nd 32MB bank)" -+ depends on MIPS && (MTD_PB1500 || MTD_PB1100) -+ help -+ Use the second of the two 32MB flash banks on Pb1100/Pb1500 board. -+ You can say 'Y' to both this and the BOOT flash option, to use -+ both banks. -+ -+config MTD_DB1X00 -+ tristate "Db1X00 Flash device" -+ depends on MIPS && (MIPS_DB1000 || MIPS_DB1100 || MIPS_DB1500) -+ help -+ Flash memory access on Alchemy Db1X00 Boards -+ -+config MTD_DB1X00_BOOT -+ bool "Db1X00 Boot Flash device" -+ depends on MIPS && MTD_DB1X00 -+ help -+ Use the first of the two 32MB flash banks on Db1X00 board. -+ You can say 'Y' to both this and the USER flash option, to use -+ both banks. -+ -+config MTD_DB1X00_USER -+ bool "Db1X00 User Flash device (2nd 32MB bank)" -+ depends on MIPS && MTD_DB1X00 -+ help -+ Use the second of the two 32MB flash banks on Db1X00 boards. -+ You can say 'Y' to both this and the BOOT flash option, to use -+ both banks. -+ -+config MTD_BOSPORUS -+ tristate "Bosporus Flash device" -+ depends on MIPS && MIPS_BOSPORUS -+ help -+ Flash memory access on Alchemy Bosporus Board -+ -+config MTD_XXS1500 -+ tristate "MyCable XXS1500 Flash device" -+ depends on MIPS && MIPS_XXS1500 -+ help -+ Flash memory access on MyCable XXS1500 Board -+ -+config MTD_MTX1 -+ tristate "4-G Systems MTX-1 Flash device" -+ depends on MIPS && MIPS_MTX1 -+ help -+ Flash memory access on 4-G Systems MTX-1 Board -+ - config MTD_BEECH - tristate "CFI Flash device mapped on IBM 405LP Beech" - depends on MTD_CFI && PPC32 && 40x && BEECH -@@ -422,6 +473,12 @@ - NVRAM on the Momenco Ocelot board. If you have one of these boards - and would like access to either of these, say 'Y'. - -+config MTD_LASAT -+ tristate "LASAT flash device" -+ depends on LASAT && MTD_CFI -+ help -+ Support for the flash chips on the Lasat 100 and 200 boards. -+ - config MTD_SOLUTIONENGINE - tristate "CFI Flash device mapped on Hitachi SolutionEngine" - depends on SUPERH && MTD_CFI && MTD_REDBOOT_PARTS ---- linux-2.6.8.1/drivers/usb/host/Makefile 2004-08-14 12:56:23.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/drivers/usb/host/Makefile 2006-06-26 09:07:14.000000000 +0200 -@@ -8,3 +8,7 @@ - obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o - - obj-$(CONFIG_USB_SL811HS) += hc_sl811.o -+ -+ifeq ($(CONFIG_MIPS_BRCM),y) -+EXTRA_CFLAGS += -DCONFIG_SWAP_IO_SPACE -D__MIPSEB__ -+endif -\ No newline at end of file ---- linux-2.6.8.1/include/asm-mips/addrspace.h 2004-08-14 12:54:47.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/include/asm-mips/addrspace.h 2006-06-26 09:07:15.000000000 +0200 -@@ -11,7 +11,13 @@ - #define _ASM_ADDRSPACE_H - - #include -+#ifdef __KERNEL__ -+#if defined(CONFIG_BCM_ENDPOINT_MODULE) -+#include -+#else - #include -+#endif -+#endif - - /* - * Configure language ---- linux-2.6.8.1/include/asm-mips/bootinfo.h 2004-08-14 12:54:51.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/include/asm-mips/bootinfo.h 2006-06-26 09:07:15.000000000 +0200 -@@ -210,6 +210,16 @@ - #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */ - #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ - -+#if defined(CONFIG_MIPS_BRCM) -+/* -+ * Valid machtype for group BRCM -+ */ -+#define MACH_GROUP_BRCM 23 /* Broadcom boards */ -+#define MACH_BCM96338 0 -+#define MACH_BCM96345 1 -+#define MACH_BCM96348 2 -+#endif -+ - #define CL_SIZE COMMAND_LINE_SIZE - - const char *get_system_type(void); ---- linux-2.6.8.1/include/asm-mips/cpu.h 2004-08-14 12:54:50.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/include/asm-mips/cpu.h 2006-06-26 09:07:15.000000000 +0200 -@@ -71,6 +71,11 @@ - #define PRID_IMP_4KEMPR2 0x9100 - #define PRID_IMP_4KSD 0x9200 - #define PRID_IMP_24K 0x9300 -+#if defined(CONFIG_MIPS_BRCM) -+#define PRID_IMP_BCM6338 0x9000 -+#define PRID_IMP_BCM6345 0x8000 -+#define PRID_IMP_BCM6348 0x9100 -+#endif - - #define PRID_IMP_UNKNOWN 0xff00 - -@@ -177,7 +182,14 @@ - #define CPU_VR4133 56 - #define CPU_AU1550 57 - #define CPU_24K 58 -+#if defined(CONFIG_MIPS_BRCM) -+#define CPU_BCM6338 59 -+#define CPU_BCM6345 60 -+#define CPU_BCM6348 61 -+#define CPU_LAST 61 -+#else - #define CPU_LAST 58 -+#endif - - /* - * ISA Level encodings -diff -urN linux-2.6.8.1/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h linux-2.6.8.1-brcm63xx/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h ---- linux-2.6.8.1/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 2006-06-26 09:07:15.000000000 +0200 -@@ -0,0 +1,36 @@ -+#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H -+#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H -+ -+#define cpu_has_tlb 1 -+#define cpu_has_4kex 4 -+#define cpu_has_4ktlb 8 -+#define cpu_has_fpu 0 -+#define cpu_has_32fpr 0 -+#define cpu_has_counter 0x40 -+#define cpu_has_watch 0 -+#define cpu_has_mips16 0 -+#define cpu_has_divec 0x200 -+#define cpu_has_vce 0 -+#define cpu_has_cache_cdex_p 0 -+#define cpu_has_cache_cdex_s 0 -+#define cpu_has_prefetch 0x40000 -+#define cpu_has_mcheck 0x2000 -+#define cpu_has_ejtag 0x4000 -+#define cpu_has_llsc 0x10000 -+#define cpu_has_vtag_icache 0 -+#define cpu_has_dc_aliases 0 -+#define cpu_has_ic_fills_f_dc 0 -+ -+#define cpu_has_nofpuex 0 -+#define cpu_has_64bits 0 -+#define cpu_has_64bit_zero_reg 0 -+#define cpu_has_64bit_gp_regs 0 -+#define cpu_has_64bit_addresses 0 -+ -+#define cpu_has_subset_pcaches 0 -+ -+#define cpu_dcache_line_size() 16 -+#define cpu_icache_line_size() 16 -+#define cpu_scache_line_size() 0 -+ -+#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */ ---- linux-2.6.8.1/include/asm-mips/mach-generic/param.h 2004-08-14 12:55:10.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/include/asm-mips/mach-generic/param.h 2006-06-26 09:07:15.000000000 +0200 -@@ -8,6 +8,10 @@ - #ifndef __ASM_MACH_GENERIC_PARAM_H - #define __ASM_MACH_GENERIC_PARAM_H - -+#if defined(CONFIG_MIPS_BRCM) -+#define HZ 200 /* Internal kernel timer frequency */ -+#else - #define HZ 1000 /* Internal kernel timer frequency */ -+#endif - - #endif /* __ASM_MACH_GENERIC_PARAM_H */ ---- linux-2.6.8.1/include/asm-mips/page.h 2004-08-14 12:55:10.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/include/asm-mips/page.h 2006-06-26 09:07:15.000000000 +0200 -@@ -13,7 +13,13 @@ - - #ifdef __KERNEL__ - -+#if defined(CONFIG_BCM_ENDPOINT_MODULE) -+#include -+#else - #include -+#endif -+ -+#endif - - /* - * PAGE_SHIFT determines the page size -@@ -33,6 +39,7 @@ - #define PAGE_SIZE (1UL << PAGE_SHIFT) - #define PAGE_MASK (~(PAGE_SIZE-1)) - -+#ifdef __KERNEL__ - #ifndef __ASSEMBLY__ - - extern void clear_page(void * page); ---- linux-2.6.8.1/include/asm-mips/param.h 2004-08-14 12:54:51.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/include/asm-mips/param.h 2006-06-26 09:07:15.000000000 +0200 -@@ -12,7 +12,11 @@ - #ifdef __KERNEL__ - - # include /* Internal kernel timer frequency */ -+#if defined(CONFIG_BCM_ENDPOINT_MODULE) -+# define USER_HZ HZ /* .. some user interfaces are in "ticks" */ -+#else - # define USER_HZ 100 /* .. some user interfaces are in "ticks" */ -+#endif - # define CLOCKS_PER_SEC (USER_HZ) /* like times() */ - #endif - ---- linux-2.6.8.1/include/asm-mips/timex.h 2004-08-14 12:56:15.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/include/asm-mips/timex.h 2006-06-26 09:07:15.000000000 +0200 -@@ -31,7 +31,11 @@ - * no reason to make this a separate architecture. - */ - -+#if defined(CONFIG_BCM_ENDPOINT_MODULE) -+#include -+#else - #include -+#endif - - /* - * Standard way to access the cycle counter. -diff -urN linux-2.6.8.1/bcmdrivers/Makefile linux-2.6.8.1-brcm63xx/bcmdrivers/Makefile ---- linux-2.6.8.1/bcmdrivers/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/Makefile 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,17 @@ -+# File: bcmdrivers/Makefile -+# -+# Makefile for the Linux kernel modules. -+# -+-include $(KERNEL_DIR)/.config -+ -+obj-y += opensource/ -+ -+# If rootfs is nfs, we have to build Ethernet -+# driver as built-n -+ifeq ($(CONFIG_ROOTFS_NFS),y) -+obj-y += broadcom/ -+endif -+ -+obj-y += broadcom/ -+obj-m += broadcom/ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/Makefile linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/Makefile ---- linux-2.6.8.1/bcmdrivers/broadcom/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/Makefile 2006-06-26 10:29:23.000000000 +0200 -@@ -0,0 +1,3 @@ -+ -+symlinks: -+ #cp ../../../tools/built-in.o built-in.o -Files linux-2.6.8.1/bcmdrivers/broadcom/built-in.o and linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/built-in.o differ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_defs.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_defs.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_defs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_defs.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,133 @@ -+/* TARGET=bcm6348-dmt-T1-dmtbis-adsl2plus-L2-SRA-firmware-Qproc-HW-RTL-pipeline-IncOneBit-Readsl2-doubleUS */ -+ -+#define SOURCE_FILE_ -+#define BCM6348_SRC -+#define G994_T1P413_1024_FFT -+#define ENABLE_DIG_USPWR_CUTBACK -+#define ADSLCORE_ONLY -+#define TEQ_DF -+#define LOOP_TIMING_PLL -+#define RCV_PHASE_TWEAK_ONLY -+#define ADSL_MAX_POSSIBLE_RCV_RATE -+#define HARDWARE_CHANNEL -+#define ADSL_HARDWARE_AGC -+#define HW_CHANNEL_ADC -+#define HW_CHANNEL_DAC -+#define HW_PGA -+#define DIGITALEC_SINGLE_TAP_UPDATE -+#define ANALOGEC_SINGLE_TAP_UPDATE -+#define HWLOG -+#define G992_TRELLIS_CODE_CLAMPING -+#define G992DECODERTRELLISBOUNDARY -+#define MEMORYLIMIT64K -+#define bcm47xx -+#define DSL_BIG_ENDIAN -+#define MIPS_SRC -+#define VP_INLINE -Winline -+#define USE_ASM_API -+#define RTL_SRC -+#define RSENC_INLINE -+#define BITENC_INLINE -+#define USE_SLOW_DATA -+#define USE_FAST_TEXT -+#define PROFILE_INLINE -+#define CHIP_SRC -+#define G992_RESYNC_PILOT_PHASE_IN_SHOWTIME -+#define G992_APPLY_SSVI -+#define SHARE_TEQ_VARS -+#define ANNEX_M -+#define DOUBLE_UP_STREAM -+#define G994P1_SUPPORT_A43C -+#define USE_ASM_API -+#define MIPS_ASM -+#define MEMORYLIMIT64K -+#define ADSL_FIRMWARE -+#define G992DATA_XMT_COMPACT_WORD -+#define ADSL_MAX_POSSIBLE_RCV_RATE -+#define DSP_FRONTEND_ONLY -+#define G992P3_ONE_BIT_CONSTELLATION -+#define ADSL_MODEM -+#define ATM -+#define ADSL_ATUR -+#define ADSL_SOFTWARE_TIME_ERROR_CALCULATION -+#define DSL_REPORT_ALL_COUNTERS -+#define ADSL_MONITOR_LCD -+#define G994P1 -+#define G994P1_ATUR -+#define G992 -+#define G992_ATUR -+#define ADSL_FRAMER -+#define G997_1 -+#define ATM_I432 -+#define TEQ_DF -+#define G992_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ -+#define G994P1_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ -+#define G992_TRELLISCODE -+#define ADSL_HARDWARE_ECHO_CANCELLOR -+#define G992P1 -+#define G992P1_ATUR -+#define G992P1_ANNEX_A -+#define ADSL_HARDWARE_TIME_ERROR_TRACKING -+#define G992P1_NEWFRAME -+#define G992P1_NEWFRAME_ATUR -+#define G992P1_ANNEX_A_USED_FOR_G992P2 -+#define T1P413 -+#define G992_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ -+#define G992_CALC_DEBUG_SNR_BEFORE_TEQ -+#define G992P3 -+#define RATE_SELECT_E14 -+#define G992P3_ATUR -+#define G992P3AMENDMENT -+#define GLOBESPAN_DM -+#define G992P3_COMB_MSG_THREE_COPIES -+#define G992P3_POWER_MANAGEMENT -+#define G992P3_SRA -+#define G992P5 -+#define G992P5_ATUR -+#define ADSL_PIPELINE_CODE -+#define ADSL_HARDWARE_TIME_ERROR_TRACKING -+#define G994P1RCV_QPROC -+#define G994P1XMT_QPROC -+#define G992RCV_QPROC -+#define G992XMT_QPROC -+#define G992RCV_RS -+#define VP_SIMULATOR -+#define T1P413RCV_QPROC -+#define T1P413XMT_QPROC -+#define G992ENC_HW_DATAMODE -+#define G992DATA_XMT_HW_RS -+#define G992DATA_XMT_COMPACT_WORD -+#define G992RCV_QPROC_FAST -+#define G992_BIT_SWAP -+#define ADSL_IDENTIFY_VENDOR_FIRMWARE -+#define ADSL_ATUR_FORCE_BIGGER_UPSTREAM_MARGIN -+#define G992_MORE_FRAME_MODE -+#define XMT_RACT2_FOR_ADI_COMPATIBILITY -+#define XMT_FFT_SIZE_2X -+#define SYNCH_SYMBOL_DETECTION -+#define ANSI_CACT12_PING_PONG -+#define ADSL_SPECIAL_FIX_FOR_FRENCH_TELECOM -+#define G994P1_CHECK_SECURITY -+#define G994P1_NON_STD_INFO -+#define I432_HEADER_COMPRESSION -+#define TDC_IOP_FIX_ERICSSON_TI_4000C_350 -+#define TDC_IOP_FIX_SEIMENS_TI -+#define FT_ADI_US_RATE_FIX -+#define ANSI_CACT12_PING_PONG -+#define G992_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ -+#define G994P1_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ -+#define READSL2 -+#define G992_APPLY_SSVI -+#define READSL2_FILTERS -+ -+ -+#define ADSL_PHY_XFACE_OFFSET 0x21F90 -+ -+ -+#define ADSL_PHY_SDRAM_BIAS 0x1A0000 -+ -+ -+#define ADSL_PHY_SDRAM_LINK_OFFSET 0x1A0000 -+ -+ -+#define ADSL_PHY_SDRAM_PAGE_SIZE 0x200000 -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_lmem.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_lmem.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_lmem.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_lmem.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,6 @@ -+/* -+** Don't change! -+** This file has been generated automatically by bin2c program -+*/ -+ -+extern const unsigned char adsl_lmem[51036]; -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_sdram.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_sdram.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_sdram.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_sdram.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,6 @@ -+/* -+** Don't change! -+** This file has been generated automatically by bin2c program -+*/ -+ -+extern const unsigned char adsl_sdram[364348]; -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslCoreDefs.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslCoreDefs.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslCoreDefs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslCoreDefs.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,245 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * AdslCore.c -- Bcm ADSL core driver -+ * -+ * Description: -+ * This file contains BCM ADSL core driver -+ * -+ * -+ * Copyright (c) 2000-2001 Broadcom Corporation -+ * All Rights Reserved -+ * No portions of this material may be reproduced in any form without the -+ * written permission of: -+ * Broadcom Corporation -+ * 16215 Alton Parkway -+ * Irvine, California 92619 -+ * All information contained in this document is Broadcom Corporation -+ * company private, proprietary, and trade secret. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.4 $ -+ * -+ * $Id: AdslCoreDefs.h,v 1.4 2004/07/20 23:45:48 ilyas Exp $ -+ * -+ * $Log: AdslCoreDefs.h,v $ -+ * Revision 1.4 2004/07/20 23:45:48 ilyas -+ * Added driver version info, SoftDslPrintf support. Fixed G.997 related issues -+ * -+ * Revision 1.3 2004/06/10 00:20:33 ilyas -+ * Added L2/L3 and SRA -+ * -+ * Revision 1.2 2004/04/12 23:24:38 ilyas -+ * Added default G992P5 PHY definition -+ * -+ * Revision 1.1 2004/04/08 23:59:15 ilyas -+ * Initial CVS checkin -+ * -+ ****************************************************************************/ -+ -+#ifndef _ADSL_CORE_DEFS_H -+#define _ADSL_CORE_DEFS_H -+ -+#if defined(__KERNEL__) -+#include -+#endif -+ -+#if defined(CONFIG_BCM96348) || defined(BOARD_bcm96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(BOARD_bcm96338) || defined(_BCM96338_) -+#ifdef ADSL_ANNEXC -+#include "../adslcore6348C/adsl_defs.h" -+#elif defined(ADSL_ANNEXB) -+#include "../adslcore6348B/adsl_defs.h" -+#elif defined(ADSL_SADSL) -+#include "../adslcore6348SA/adsl_defs.h" -+#else -+#include "../adslcore6348/adsl_defs.h" -+#endif -+#endif -+ -+#if defined(__KERNEL__) || defined(TARG_OS_RTEMS) || defined(_CFE_) -+#if defined(CONFIG_BCM96345) || defined(BOARD_bcm96345) || defined(_BCM96345_) -+#ifdef ADSL_ANNEXC -+#include "../adslcore6345C/adsl_defs.h" -+#elif defined(ADSL_ANNEXB) -+#include "../adslcore6345B/adsl_defs.h" -+#elif defined(ADSL_SADSL) -+#include "../adslcore6345SA/adsl_defs.h" -+#else -+#include "../adslcore6345/adsl_defs.h" -+#endif -+#endif /* of CONFIG_BCM96345 */ -+#else -+#if defined(CONFIG_BCM96345) -+#ifdef ADSL_ANNEXC -+#include "../adslcoreC/adsl_defs.h" -+#elif defined(ADSL_ANNEXB) -+#include "../adslcoreB/adsl_defs.h" -+#elif defined(ADSL_SADSL) -+#include "../adslcoreSA/adsl_defs.h" -+#else -+#include "../adslcore/adsl_defs.h" -+#endif -+#endif /* of CONFIG_BCM96345 */ -+#endif /* __KERNEL__ */ -+ -+#ifdef _WIN32_WCE -+#define ASSERT(a) -+#endif -+ -+#include "AdslXfaceData.h" -+ -+/* adjust some definitions for the HOST */ -+ -+#undef GLOBAL_PTR_BIAS -+#undef ADSLCORE_ONLY -+#undef USE_SLOW_DATA -+#undef USE_FAST_TEXT -+#undef VP_SIMULATOR -+#undef bcm47xx -+#undef ADSL_FRAMER -+#undef ATM -+#undef ATM_I432 -+#undef DSL_OS -+ -+#define HOST_ONLY -+#define G997_1_FRAMER -+#define ADSL_MIB -+ -+#ifndef FLATTEN_ADDR_ADJUST -+#define FLATTEN_ADDR_ADJUST 0xFFF00000 -+#endif -+ -+/* definitions for combo PHY (AnnexA(ADSL2) and AnnexB) */ -+ -+#if !(defined(ADSL_SINGLE_PHY) || defined(G992_ANNEXC)) -+ -+#undef G992P1_ANNEX_A -+#define G992P1_ANNEX_A -+#undef G992P3 -+#define G992P3 -+#undef G992P5 -+#define G992P5 -+#define G992P1_ANNEX_A -+#undef READSL2 -+#define READSL2 -+#undef G992P1_ANNEX_A_USED_FOR_G992P2 -+#define G992P1_ANNEX_A_USED_FOR_G992P2 -+#undef T1P413 -+#define T1P413 -+ -+#undef G992P1_ANNEX_B -+#define G992P1_ANNEX_B -+ -+#endif -+ -+/* ADSL PHY definition */ -+ -+typedef struct { -+ unsigned long sdramPageAddr; -+ unsigned long sdramImageAddr; -+ unsigned long sdramImageSize; -+ unsigned long sdramPhyImageAddr; -+ unsigned short fwType; -+ unsigned short chipType; -+ unsigned short mjVerNum; -+ unsigned short mnVerNum; -+ char *pVerStr; -+ unsigned long features[4]; -+} adslPhyInfo; -+extern adslPhyInfo adslCorePhyDesc; -+ -+/* chip list */ -+ -+#define kAdslPhyChipMjMask 0xFF00 -+#define kAdslPhyChipMnMask 0x00FF -+#define kAdslPhyChipUnknown 0 -+#define kAdslPhyChip6345 0x100 -+#define kAdslPhyChip6348 0x200 -+#define kAdslPhyChipRev0 0 -+#define kAdslPhyChipRev1 1 -+#define kAdslPhyChipRev2 2 -+#define kAdslPhyChipRev3 3 -+#define kAdslPhyChipRev4 4 -+#define kAdslPhyChipRev5 5 -+ -+#define ADSL_PHY_SUPPORT(f) AdslFeatureSupported(adslCorePhyDesc.features,f) -+#define ADSL_PHY_SET_SUPPORT(p,f) AdslFeatureSet((p)->features,f) -+ -+/* ADSL Driver to/from PHY address and data conversion macros */ -+ -+#ifdef ADSLDRV_LITTLE_ENDIAN -+#define ADSL_ENDIAN_CONV_LONG(x) ( ((x) << 24) | (((x) << 8) & 0x00FF0000) | (((x) >> 8) & 0x0000FF00) | ((unsigned long)(x) >> 24) ) -+#define ADSL_ENDIAN_CONV_SHORT(x) ( ((x) << 8) | ((unsigned short)(x) >> 8) ) -+#define ADSL_ENDIAN_CONV_2SHORTS(x) ( ((x) << 16) | ((unsigned long)(x) >> 16) ) -+#else -+#define ADSL_ENDIAN_CONV_LONG(x) x -+#define ADSL_ENDIAN_CONV_SHORT(x) x -+#define ADSL_ENDIAN_CONV_2SHORTS(x) x -+#endif -+ -+#ifndef ADSL_PHY_XFACE_OFFSET -+#define ADSL_PHY_XFACE_OFFSET 0x00017F90 -+#endif -+#define ADSL_LMEM_XFACE_DATA (0xFFF00000 | ADSL_PHY_XFACE_OFFSET) -+ -+#ifndef ADSL_PHY_SDRAM_START -+#define ADSL_PHY_SDRAM_START 0x10000000 -+#endif -+#ifndef ADSL_PHY_SDRAM_BIAS -+#define ADSL_PHY_SDRAM_BIAS 0x00040000 -+#endif -+#define ADSL_PHY_SDRAM_START_4 (ADSL_PHY_SDRAM_START + ADSL_PHY_SDRAM_BIAS) -+ -+#ifndef ADSL_PHY_SDRAM_PAGE_SIZE -+#define ADSL_PHY_SDRAM_PAGE_SIZE 0x00080000 -+#endif -+ -+#ifdef ADSL_PHY_SDRAM_BIAS -+#define ADSL_SDRAM_IMAGE_SIZE (ADSL_PHY_SDRAM_PAGE_SIZE - ADSL_PHY_SDRAM_BIAS) -+#else -+#define ADSL_SDRAM_IMAGE_SIZE (256*1024) -+#endif -+ -+ -+#ifndef ADSL_PHY_SDRAM_LINK_OFFSET -+#define ADSL_PHY_SDRAM_LINK_OFFSET 0x00040000 -+#endif -+ -+#define ADSL_SDRAM_TOTAL_SIZE 0x00800000 -+#define ADSL_SDRAM_HOST_MIPS_DEFAULT (0xA0000000 | (ADSL_SDRAM_TOTAL_SIZE - ADSL_PHY_SDRAM_PAGE_SIZE + ADSL_PHY_SDRAM_BIAS)) -+ -+#define ADSLXF ((AdslXfaceData *) ADSL_LMEM_XFACE_DATA) -+ -+#define ADSL_MIPS_LMEM_ADDR(a) (((ulong)(a) & 0x19000000) == 0x19000000) -+#define SDRAM_ADDR_TO_HOST(a) ((void *) ((ulong)(a) - adslCorePhyDesc.sdramPhyImageAddr + \ -+ (ADSLXF->sdramBaseAddr ? (unsigned long) ADSLXF->sdramBaseAddr : ADSL_SDRAM_HOST_MIPS_DEFAULT))) -+#define SDRAM_ADDR_TO_ADSL(a) ((void *) (adslCorePhyDesc.sdramPhyImageAddr + ((ulong)(a) - \ -+ (ADSLXF->sdramBaseAddr ? (unsigned long) ADSLXF->sdramBaseAddr : ADSL_SDRAM_HOST_MIPS_DEFAULT)))) -+ -+#define ADSL_ADDR_TO_HOST(addr) ADSL_MIPS_LMEM_ADDR(addr) ? (void *) ((ulong) (addr) | FLATTEN_ADDR_ADJUST) : SDRAM_ADDR_TO_HOST(addr) -+ -+ -+#ifndef DEBUG -+#define DEBUG -+#endif -+ -+#ifndef __SoftDslPrintf -+void __SoftDslPrintf(void *gDslVars, char *fmt, int argNum, ...); -+#endif -+ -+#endif -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMib.gh linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMib.gh ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMib.gh 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMib.gh 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,94 @@ -+/**************************************************************************** -+ * -+ * AdslMib.gh -+ * -+ * Description: -+ * This is a header file which defines the type for AdslMib -+ * global variable structure. -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.8 $ -+ * -+ * $Id: AdslMib.gh,v 1.8 2004/06/04 18:56:01 ilyas Exp $ -+ * -+ * $Log: AdslMib.gh,v $ -+ * Revision 1.8 2004/06/04 18:56:01 ilyas -+ * Added counter for ADSL2 framing and performance -+ * -+ * Revision 1.7 2003/10/17 21:02:12 ilyas -+ * Added more data for ADSL2 -+ * -+ * Revision 1.6 2003/10/14 00:55:27 ilyas -+ * Added UAS, LOSS, SES error seconds counters. -+ * Support for 512 tones (AnnexI) -+ * -+ * Revision 1.5 2003/07/18 19:07:15 ilyas -+ * Merged with ADSL driver -+ * -+ * Revision 1.4 2002/11/13 21:32:49 ilyas -+ * Added adjustK support for Centillium non-standard framing mode -+ * -+ * Revision 1.3 2002/10/31 20:27:13 ilyas -+ * Merged with the latest changes for VxWorks/Linux driver -+ * -+ * Revision 1.2 2002/07/20 00:51:41 ilyas -+ * Merged witchanges made for VxWorks/Linux driver. -+ * -+ * Revision 1.1 2001/12/21 22:39:30 ilyas -+ * Added support for ADSL MIB data objects (RFC2662) -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef AdslMibGlobals -+#define AdslMibGlobals -+ -+#include "AdslMib.h" -+ -+typedef struct -+ { -+ /* MIB data */ -+ -+ adslMibInfo adslMib; -+ -+ /* ADSL state data */ -+ -+ adslMibNotifyHandlerType notifyHandlerPtr; -+ ulong timeSec; -+ ulong timeMs; -+ Boolean currSecondErrored; -+ Boolean currSecondLOS; -+ Boolean currSecondSES; -+ Boolean currSecondFEC; -+ ulong rcvPower; -+ ulong rcvRateBps; -+ ulong xmtRateBps; -+ ulong linkStatus; -+ G992CodingParams rcvParams; -+ G992CodingParams xmtParams; -+ ulong shtCounters[kG992ShowtimeNumOfMonitorCounters]; -+ ulong scratchData; -+ long showtimeMarginThld; -+ -+ /* ADSL diag data */ -+ -+ short snr[kAdslMibMaxToneNum]; -+ short showtimeMargin[kAdslMibMaxToneNum]; -+ uchar bitAlloc[kAdslMibMaxToneNum]; -+ short gain[kAdslMibMaxToneNum]; -+ ComplexShort chanCharLin[kAdslMibMaxToneNum]; -+ short chanCharLog[kAdslMibMaxToneNum]; -+ short quietLineNoise[kAdslMibMaxToneNum]; -+ -+ ushort nTones; -+ uchar nMsgCnt; -+ ulong g992MsgType; -+ uchar rsOption[1+4]; -+ Boolean rsOptionValid; -+ } -+ adslMibVarsStruct; -+ -+#endif /* AdslMibGlobals */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMib.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMib.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMib.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMib.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,114 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * AdslMib.h -+ * -+ * Description: -+ * This file contains the exported functions and definitions for AdslMib -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.9 $ -+ * -+ * $Id: AdslMib.h,v 1.9 2004/04/12 23:34:52 ilyas Exp $ -+ * -+ * $Log: AdslMib.h,v $ -+ * Revision 1.9 2004/04/12 23:34:52 ilyas -+ * Merged the latest ADSL driver chnages for ADSL2+ -+ * -+ * Revision 1.8 2004/03/03 20:14:05 ilyas -+ * Merged changes for ADSL2+ from ADSL driver -+ * -+ * Revision 1.7 2003/10/14 00:55:27 ilyas -+ * Added UAS, LOSS, SES error seconds counters. -+ * Support for 512 tones (AnnexI) -+ * -+ * Revision 1.6 2003/07/18 19:07:15 ilyas -+ * Merged with ADSL driver -+ * -+ * Revision 1.5 2002/10/31 20:27:13 ilyas -+ * Merged with the latest changes for VxWorks/Linux driver -+ * -+ * Revision 1.4 2002/07/20 00:51:41 ilyas -+ * Merged witchanges made for VxWorks/Linux driver. -+ * -+ * Revision 1.3 2002/01/13 22:25:40 ilyas -+ * Added functions to get channels rate -+ * -+ * Revision 1.2 2002/01/03 06:03:36 ilyas -+ * Handle byte moves tha are not multiple of 2 -+ * -+ * Revision 1.1 2001/12/21 22:39:30 ilyas -+ * Added support for ADSL MIB data objects (RFC2662) -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef AdslMibHeader -+#define AdslMibHeader -+ -+#if defined(_CFE_) -+#include "lib_types.h" -+#include "lib_string.h" -+#endif -+ -+#include "AdslMibDef.h" -+ -+/* Interface functions */ -+ -+typedef int (SM_DECL *adslMibNotifyHandlerType) (void *gDslVars, ulong event); -+ -+extern Boolean AdslMibInit(void *gDslVars); -+extern void AdslMibTimer(void *gDslVars, long timeMs); -+extern void AdslMibStatusSnooper (void *gDslVars, dslStatusStruct *status); -+extern void AdslMibSetNotifyHandler(void *gDslVars, adslMibNotifyHandlerType notifyHandlerPtr); -+extern int AdslMibGetModulationType(void *gDslVars); -+extern Boolean AdslMibIsAdsl2Mod(void *gDslVars); -+extern int AdslMibGetActiveChannel(void *gDslVars); -+extern int AdslMibGetGetChannelRate(void *gDslVars, int dir, int channel); -+extern Boolean AdslMibIsLinkActive(void *gDslVars); -+extern int AdslMibPowerState(void *gDslVars); -+extern int AdslMibTrainingState (void *gDslVars); -+extern void AdslMibClearData(void *gDslVars); -+extern void AdslMibClearBertResults(void *gDslVars); -+extern void AdslMibBertStartEx(void *gDslVars, ulong bertSec); -+extern void AdslMibBertStopEx(void *gDslVars); -+extern ulong AdslMibBertContinueEx(void *gDslVars, ulong totalBits, ulong errBits); -+extern void AdslMibSetLPR(void *gDslVars); -+extern void AdslMibSetShowtimeMargin(void *gDslVars, long showtimeMargin); -+extern void AdslMibResetConectionStatCounters(void *gDslVars); -+ -+extern void AdslMibByteMove (int size, void* srcPtr, void* dstPtr); -+extern void AdslMibByteClear(int size, void* dstPtr); -+extern int AdslMibStrCopy(char *srcPtr, char *dstPtr); -+ -+/* AdslMibGetData dataId codes */ -+ -+#define kAdslMibDataAll 0 -+ -+extern void *AdslMibGetData (void *gDslVars, int dataId, void *pAdslMibData); -+ -+extern int AdslMibGetObjectValue ( -+ void *gDslVars, -+ uchar *objId, -+ int objIdLen, -+ uchar *dataBuf, -+ ulong *dataBufLen); -+ -+#endif /* AdslMibHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMibOid.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMibOid.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMibOid.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMibOid.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,177 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * AdslMibOid.h -+ * -+ * Description: -+ * SNMP object identifiers for ADSL MIB and other related MIBs -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.5 $ -+ * -+ * $Id: AdslMibOid.h,v 1.5 2004/06/04 18:56:01 ilyas Exp $ -+ * -+ * $Log: AdslMibOid.h,v $ -+ * Revision 1.5 2004/06/04 18:56:01 ilyas -+ * Added counter for ADSL2 framing and performance -+ * -+ * Revision 1.4 2003/10/17 21:02:12 ilyas -+ * Added more data for ADSL2 -+ * -+ * Revision 1.3 2003/10/14 00:55:27 ilyas -+ * Added UAS, LOSS, SES error seconds counters. -+ * Support for 512 tones (AnnexI) -+ * -+ * Revision 1.2 2002/07/20 00:51:41 ilyas -+ * Merged witchanges made for VxWorks/Linux driver. -+ * -+ * Revision 1.1 2001/12/21 22:39:30 ilyas -+ * Added support for ADSL MIB data objects (RFC2662) -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef AdslMibOidHeader -+#define AdslMibOidHeader -+ -+#define kOidAdsl 94 -+#define kOidAdslInterleave 124 -+#define kOidAdslFast 125 -+#define kOidAtm 37 -+ -+#define kOidAdslLine 1 -+#define kOidAdslMibObjects 1 -+ -+#define kOidAdslLineTable 1 -+#define kOidAdslLineEntry 1 -+#define kOidAdslLineCoding 1 -+#define kOidAdslLineType 2 -+#define kOidAdslLineSpecific 3 -+#define kOidAdslLineConfProfile 4 -+#define kOidAdslLineAlarmConfProfile 5 -+ -+#define kOidAdslAtucPhysTable 2 -+#define kOidAdslAturPhysTable 3 -+#define kOidAdslPhysEntry 1 -+#define kOidAdslPhysInvSerialNumber 1 -+#define kOidAdslPhysInvVendorID 2 -+#define kOidAdslPhysInvVersionNumber 3 -+#define kOidAdslPhysCurrSnrMgn 4 -+#define kOidAdslPhysCurrAtn 5 -+#define kOidAdslPhysCurrStatus 6 -+#define kOidAdslPhysCurrOutputPwr 7 -+#define kOidAdslPhysCurrAttainableRate 8 -+ -+#define kOidAdslAtucChanTable 4 -+#define kOidAdslAturChanTable 5 -+#define kOidAdslChanEntry 1 -+#define kOidAdslChanInterleaveDelay 1 -+#define kOidAdslChanCurrTxRate 2 -+#define kOidAdslChanPrevTxRate 3 -+#define kOidAdslChanCrcBlockLength 4 -+ -+#define kOidAdslAtucPerfDataTable 6 -+#define kOidAdslAturPerfDataTable 7 -+#define kOidAdslPerfDataEntry 1 -+#define kOidAdslPerfLofs 1 -+#define kOidAdslPerfLoss 2 -+#define kOidAdslPerfLprs 3 -+#define kOidAdslPerfESs 4 -+#define kOidAdslPerfValidIntervals 5 -+#define kOidAdslPerfInvalidIntervals 6 -+#define kOidAdslPerfCurr15MinTimeElapsed 7 -+#define kOidAdslPerfCurr15MinLofs 8 -+#define kOidAdslPerfCurr15MinLoss 9 -+#define kOidAdslPerfCurr15MinLprs 10 -+#define kOidAdslPerfCurr15MinESs 11 -+#define kOidAdslPerfCurr1DayTimeElapsed 12 -+#define kOidAdslPerfCurr1DayLofs 13 -+#define kOidAdslPerfCurr1DayLoss 14 -+#define kOidAdslPerfCurr1DayLprs 15 -+#define kOidAdslPerfCurr1DayESs 16 -+#define kOidAdslPerfPrev1DayMoniSecs 17 -+#define kOidAdslPerfPrev1DayLofs 18 -+#define kOidAdslPerfPrev1DayLoss 19 -+#define kOidAdslPerfPrev1DayLprs 20 -+#define kOidAdslPerfPrev1DayESs 21 -+ -+#define kOidAdslAtucPerfIntervalTable 8 -+#define kOidAdslAturPerfIntervalTable 9 -+#define kOidAdslPerfIntervalEntry 1 -+#define kOidAdslIntervalNumber 1 -+#define kOidAdslIntervalLofs 2 -+#define kOidAdslIntervalLoss 3 -+#define kOidAdslIntervalLprs 4 -+#define kOidAdslIntervalESs 5 -+#define kOidAdslIntervalValidData 6 -+ -+#define kOidAdslAtucChanPerfTable 10 -+#define kOidAdslAturChanPerfTable 11 -+#define kOidAdslChanPerfEntry 1 -+#define kOidAdslChanReceivedBlks 1 -+#define kOidAdslChanTransmittedBlks 2 -+#define kOidAdslChanCorrectedBlks 3 -+#define kOidAdslChanUncorrectBlks 4 -+#define kOidAdslChanPerfValidIntervals 5 -+#define kOidAdslChanPerfInvalidIntervals 6 -+#define kOidAdslChanPerfCurr15MinTimeElapsed 7 -+#define kOidAdslChanPerfCurr15MinReceivedBlks 8 -+#define kOidAdslChanPerfCurr15MinTransmittedBlks 9 -+#define kOidAdslChanPerfCurr15MinCorrectedBlks 10 -+#define kOidAdslChanPerfCurr15MinUncorrectBlks 11 -+#define kOidAdslChanPerfCurr1DayTimeElapsed 12 -+#define kOidAdslChanPerfCurr1DayReceivedBlks 13 -+#define kOidAdslChanPerfCurr1DayTransmittedBlks 14 -+#define kOidAdslChanPerfCurr1DayCorrectedBlks 15 -+#define kOidAdslChanPerfCurr1DayUncorrectBlks 16 -+#define kOidAdslChanPerfPrev1DayMoniSecs 17 -+#define kOidAdslChanPerfPrev1DayReceivedBlks 18 -+#define kOidAdslChanPerfPrev1DayTransmittedBlks 19 -+#define kOidAdslChanPerfPrev1DayCorrectedBlks 20 -+#define kOidAdslChanPerfPrev1DayUncorrectBlks 21 -+ -+#define kOidAdslAtucChanIntervalTable 12 -+#define kOidAdslAturChanIntervalTable 13 -+#define kOidAdslChanIntervalEntry 1 -+#define kOidAdslChanIntervalNumber 1 -+#define kOidAdslChanIntervalReceivedBlks 2 -+#define kOidAdslChanIntervalTransmittedBlks 3 -+#define kOidAdslChanIntervalCorrectedBlks 4 -+#define kOidAdslChanIntervalUncorrectBlks 5 -+#define kOidAdslChanIntervalValidData 6 -+ -+/* AdslExtra OIDs for kOidAdslPrivate, kOidAdslPrivExtraInfo (defined in AdslMibDef.h) */ -+ -+#define kOidAdslExtraConnectionInfo 1 -+#define kOidAdslExtraConnectionStat 2 -+#define kOidAdslExtraFramingMode 3 -+#define kOidAdslExtraTrainingState 4 -+#define kOidAdslExtraNonStdFramingAdjustK 5 -+#define kOidAdslExtraAtmStat 6 -+#define kOidAdslExtraDiagModeData 7 -+#define kOidAdslExtraAdsl2Info 8 -+#define kOidAdslExtraTxPerfCounterInfo 9 -+ -+#define kOidAtmMibObjects 1 -+#define kOidAtmTcTable 4 -+#define kOidAtmTcEntry 1 -+#define kOidAtmOcdEvents 1 -+#define kOidAtmAlarmState 2 -+ -+#endif /* AdslMibOidHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslXfaceData.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslXfaceData.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslXfaceData.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslXfaceData.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,129 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * AdslXfaceData.h -- ADSL Core interface data structure -+ * -+ * Description: -+ * To be included both in SoftDsl and BcmAdslCore driver -+ * -+ * -+ * Copyright (c) 2000-2001 Broadcom Corporation -+ * All Rights Reserved -+ * No portions of this material may be reproduced in any form without the -+ * written permission of: -+ * Broadcom Corporation -+ * 16215 Alton Parkway -+ * Irvine, California 92619 -+ * All information contained in this document is Broadcom Corporation -+ * company private, proprietary, and trade secret. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.9 $ -+ * -+ * $Id: AdslXfaceData.h,v 1.9 2004/02/03 02:57:22 ilyas Exp $ -+ * -+ * $Log: AdslXfaceData.h,v $ -+ * Revision 1.9 2004/02/03 02:57:22 ilyas -+ * Added PHY feature settings -+ * -+ * Revision 1.8 2003/07/18 04:50:21 ilyas -+ * Added shared buffer for clEoc messages to avoid copying thru command buffer -+ * -+ * Revision 1.7 2003/02/25 00:46:32 ilyas -+ * Added T1.413 EOC vendor ID -+ * -+ * Revision 1.6 2003/02/21 23:29:13 ilyas -+ * Added OEM vendor ID parameter for T1.413 mode -+ * -+ * Revision 1.5 2002/09/13 21:17:12 ilyas -+ * Added pointers to version and build string to OEM interface structure -+ * -+ * Revision 1.4 2002/09/07 04:16:29 ilyas -+ * Fixed HOST to ADSL MIPS SDRAM address translation for relocatable images -+ * -+ * Revision 1.3 2002/09/07 01:43:59 ilyas -+ * Added support for OEM parameters -+ * -+ * Revision 1.2 2002/01/22 19:03:10 khp -+ * -put sdramBaseAddr at end of Xface struct -+ * -+ * Revision 1.1 2002/01/15 06:25:08 ilyas -+ * Initial implementation of ADSL core firmware -+ * -+ ****************************************************************************/ -+ -+#ifndef AdslXfaceDataHeader -+#define AdslXfaceDataHeader -+ -+#include "CircBuf.h" -+ -+typedef struct _AdslXfaceData { -+ stretchBufferStruct sbSta; -+ stretchBufferStruct sbCmd; -+ unsigned long gfcTable[15]; -+ void *sdramBaseAddr; -+} AdslXfaceData; -+ -+/* Shared SDRAM configuration data */ -+ -+#define kAdslOemVendorIdMaxSize 8 -+#define kAdslOemVersionMaxSize 32 -+#define kAdslOemSerNumMaxSize 32 -+#define kAdslOemNonStdInfoMaxSize 64 -+ -+typedef struct _AdslOemSharedData { -+ unsigned long g994VendorIdLen; -+ unsigned long g994XmtNonStdInfoLen; -+ unsigned long g994RcvNonStdInfoLen; -+ unsigned long eocVendorIdLen; -+ unsigned long eocVersionLen; -+ unsigned long eocSerNumLen; -+ unsigned char g994VendorId[kAdslOemVendorIdMaxSize]; -+ unsigned char eocVendorId[kAdslOemVendorIdMaxSize]; -+ unsigned char eocVersion[kAdslOemVersionMaxSize]; -+ unsigned char eocSerNum[kAdslOemSerNumMaxSize]; -+ unsigned char g994XmtNonStdInfo[kAdslOemNonStdInfoMaxSize]; -+ unsigned char g994RcvNonStdInfo[kAdslOemNonStdInfoMaxSize]; -+ char *gDslVerionStringPtr; -+ char *gDslBuildDataStringPtr; -+ unsigned long t1413VendorIdLen; -+ unsigned char t1413VendorId[kAdslOemVendorIdMaxSize]; -+ unsigned long t1413EocVendorIdLen; -+ unsigned char t1413EocVendorId[kAdslOemVendorIdMaxSize]; -+ unsigned long clEocBufLen; -+ unsigned char *clEocBufPtr; -+} AdslOemSharedData; -+ -+/* feature list */ -+ -+#define kAdslPhyAnnexA 0 -+#define kAdslPhyAnnexB 1 -+#define kAdslPhyAnnexC 2 -+#define kAdslPhySADSL 3 -+#define kAdslPhyAdsl2 4 -+#define kAdslPhyAdslG992p3 4 -+#define kAdslPhyAdsl2p 5 -+#define kAdslPhyAdslG992p5 5 -+#define kAdslPhyAnnexI 6 -+#define kAdslPhyAdslReAdsl2 7 -+#define kAdslPhyG992p2Init 8 -+#define kAdslPhyT1P413 9 -+ -+#define AdslFeatureSupported(fa,f) ((fa)[(f) >> 5] & (1 << ((f) & 0x1F))) -+#define AdslFeatureSet(fa,f) (fa)[(f) >> 5] |= (1 << ((f) & 0x1F)) -+ -+#endif /* AdslXfaceDataHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/BlankList.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/BlankList.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/BlankList.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/BlankList.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,87 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * BlankList.h -+ * -+ * Description: -+ * Definition and implementation (via macros and inline functions) -+ * of blank list - list of unused items of any size (not less than -+ * sizeof(void *) -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ *****************************************************************************/ -+ -+#ifndef BlankListHeader -+#define BlankListHeader -+ -+#define BlankListPeek(head) ((void *) (head)) -+#define BlankListNext(p) (*(void **) (p)) -+ -+#define BlankListAdd(pHead,p) do { \ -+ BlankListNext(p) = BlankListNext(pHead); \ -+ BlankListNext(pHead) = (void *) (p); \ -+} while (0) -+ -+#define BlankListAddList(pHead,pFirst,pLast) do { \ -+ if (NULL != (pLast)) { \ -+ BlankListNext(pLast) = BlankListNext(pHead); \ -+ BlankListNext(pHead) = (void *) (pFirst); \ -+ } \ -+} while (0) -+ -+#define BlankListGet(pHead) \ -+ BlankListNext(pHead); \ -+ { \ -+ void **__p; \ -+ __p = (void **) BlankListNext(pHead); \ -+ if (NULL != __p) \ -+ BlankListNext(pHead) = *__p; \ -+ } -+ -+ -+#define BlankListForEach(pHead,f,ref) do { \ -+ void *p = BlankListNext(pHead); \ -+ \ -+ while (NULL != p) { \ -+ if ( (f)((p), ref) ) break; \ -+ p = BlankListNext(p); \ -+ } \ -+} while (0) -+ -+ -+#include "Que.h" -+ -+#define BlankListAddQue(pHead,pqHdr) do { \ -+ if (NULL != ((QueHeader *)(pqHdr))->tail) { \ -+ BlankListNext(((QueHeader *)(pqHdr))->tail) = BlankListNext(pHead); \ -+ BlankListNext(pHead) = ((QueHeader *)(pqHdr))->head; \ -+ } \ -+} while (0) -+ -+#include "DList.h" -+ -+#define BlankListAddDList(pHead,pDListHead) do { \ -+ if (!DListEmpty(pDListHead)) { \ -+ BlankListNext(DListLast(pDListHead)) = BlankListNext(pHead); \ -+ BlankListNext(pHead) = DListFirst(pDListHead); \ -+ } \ -+} while (0) -+ -+#endif /* BlankListHeader */ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/BlockUtil.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/BlockUtil.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/BlockUtil.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/BlockUtil.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,235 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/* BlockUtil.h -+ * -+ * Description: -+ * This file contains the interfaces for the fixed point block -+ * processing utilities. -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Mark Gonikberg, Haixiang Liang. -+ * -+ * $Revision: 1.23 $ -+ * -+ * $Id: BlockUtil.h,v 1.23 2004/04/13 00:31:10 ilyas Exp $ -+ * -+ * $Log: BlockUtil.h,v $ -+ * Revision 1.23 2004/04/13 00:31:10 ilyas -+ * Added standard header for shared ADSL driver files -+ * -+ * Revision 1.22 2003/07/11 01:49:01 gsyu -+ * Added BlockShortClearByLong to speed up performance -+ * -+ * Revision 1.21 2003/07/10 22:35:23 gsyu -+ * Speed up BlockByteXXX performance -+ * -+ * Revision 1.20 2003/07/10 22:15:51 gsyu -+ * Added BlockByteMoveByWord to speed up performance -+ * -+ * Revision 1.19 2002/03/12 00:03:03 yongbing -+ * Modify cplxScaleCplxSymbols to accept a shift value instead of an array of shifts -+ * -+ * Revision 1.18 2001/03/14 00:50:25 georgep -+ * All targets use FEQ_PASS_FFTSHIFT, remove code for case where its not defined -+ * -+ * Revision 1.17 2000/11/30 03:54:09 khp -+ * -BlockRealScaleCplxSymbols instead of BlockScaleComplexSymbols -+ * -+ * Revision 1.16 2000/11/29 20:42:12 liang -+ * Add function for ADSL xmt gains with fixed shift. -+ * -+ * Revision 1.15 2000/10/02 19:24:08 georgep -+ * Modify FEQ for new fft, fft outputs a shift for each block -+ * -+ * Revision 1.14 2000/09/09 00:23:48 liang -+ * Add corresponding functions for the ComplexLong FEQ coef. -+ * -+ * Revision 1.13 2000/05/17 01:36:52 yongbing -+ * Add Pentium MMX assembly codes for more block related functions -+ * -+ * Revision 1.12 2000/04/19 19:22:22 yongbing -+ * Add BlockShortScaleby2 function used in G994p1 -+ * -+ * Revision 1.11 2000/04/04 02:28:01 liang -+ * Merged with SoftDsl_0_2 from old tree. -+ * -+ * Revision 1.11 2000/03/14 23:29:01 yongbing -+ * Add Pentim MMX codes for BlockCplxSymbolUpdateCplxScale function -+ * -+ * Revision 1.10 2000/02/16 01:53:00 yongbing -+ * Add Pentium MMX module for FEQ -+ * -+ * Revision 1.9 1999/11/02 02:49:55 liang -+ * Add BlockComplexPower function. -+ * -+ * Revision 1.8 1999/08/05 19:42:34 liang -+ * Merged with the softmodem top of the tree on 08/04/99 for assembly files. -+ * -+ * Revision 1.7 1999/06/16 00:54:39 liang -+ * BlockRealScaleComplexSymbols takes a scale shift buffer now. -+ * -+ * Revision 1.6 1999/05/22 02:18:29 liang -+ * Add one more parameter to BlockCplxSymbolUpdateCplxScale function. -+ * -+ * Revision 1.5 1999/05/14 22:49:39 liang -+ * Added two more functions. -+ * -+ * Revision 1.4 1999/03/26 03:29:57 liang -+ * Add function BlockComplexMultLongAcc. -+ * -+ * Revision 1.3 1999/02/22 22:40:59 liang -+ * BlockByteSum takes uchar inputs instead of schar. -+ * -+ * Revision 1.2 1999/02/10 01:56:44 liang -+ * Added BlockByteSum, BlockRealScaleComplexSymbols and BlockCplxScaleComplexSymbols. -+ * -+ * Revision 1.1 1998/10/28 01:35:38 liang -+ * *** empty log message *** -+ * -+ * Revision 1.12 1998/07/08 17:09:25 scott -+ * Removed unnecessary undefs -+ * -+ * Revision 1.11 1998/04/02 06:19:44 mwg -+ * Added two new utilities. -+ * -+ * Revision 1.10 1998/03/26 23:20:55 liang -+ * Added function BlockShortMultiply. -+ * -+ * Revision 1.9 1998/02/16 18:41:00 scott -+ * Added MMX autodetect support -+ * -+ * Revision 1.8 1997/12/13 06:11:35 mwg -+ * Added new functions: -+ * BlockLongSubtract() -+ * BlockLongAdd() -+ * BlockLong2ShortSubtract() -+ * BlockShort2LongMove() -+ * BlockShortInterpolate() -+ * BlockLongCorrelate() -+ * BlockMapShort2Short() -+ * -+ * Revision 1.7 1997/03/19 18:35:10 mwg -+ * Changed copyright notice. -+ * -+ * Revision 1.6 1997/02/11 00:08:18 mwg -+ * Added BlockByteMove function -+ * -+ * Revision 1.5 1997/02/04 08:40:08 mwg -+ * Changed interface forBlockReal2ComplexMacc() -+ * -+ * Revision 1.4 1997/01/23 02:04:28 mwg -+ * Added return value to BlockShortMove -+ * -+ * Revision 1.3 1996/12/19 22:34:55 mwg -+ * Added new function BlockFullPower(). -+ * -+ * Revision 1.2 1996/02/21 03:59:15 mwg -+ * Added new function BlockReal2ComplexMacc -+ * -+ * Revision 1.1.1.1 1996/02/14 02:35:13 mwg -+ * Redesigned the project directory structure. Merged V.34 into the project. -+ * -+ * Revision 1.5 1995/04/04 06:09:32 mwg -+ * Changed the SoftModem status reporting: now the status is a structure/union -+ * where different fields used for different status code. This will enable -+ * efficient status snooping for high level protocols on top of the softmodem. -+ * -+ */ -+ -+#ifndef BlockUtilPh -+#define BlockUtilPh -+ -+extern void BlockLongAdd (int, long*, long*, long*); -+extern void BlockLong2ShortSubtract (int, long*, long*, short*); -+extern void BlockShort2LongMove (int, short*, long*); -+extern void BlockShortMultiply (int, int, short*, short*, short*); -+extern void BlockByteMoveUnaligned (int size, uchar *srcPtr, uchar *dstPtr); -+extern void BlockShortOffset (int, short, short*, short*); -+extern long BlockShortInterpolateWithIncrement (int size, long scaleFactor, long increment, int shift, short* src1Ptr, short* src2Ptr, short* dstPtr); -+extern void BlockReal2ComplexMult (int, short*, ComplexShort*, ComplexShort*); -+extern void BlockComplexConjigateMult (int, ComplexShort*, ComplexShort*, ComplexShort*); -+ -+extern long BlockSum (int, short*); -+extern long BlockByteSum (int, uchar*); -+extern void BlockComplexSum (int, ComplexShort*, ComplexLong*); -+extern void BlockComplexPower (int, int, ComplexShort*, long*); -+extern long BlockFullPower (int, short*); -+extern long BlockLongCorrelate (int, long*, long*); -+ -+extern int BlockSymbol2Byte (int, int, ushort*, uchar*); -+extern int BlockByte2Symbol (int, int, uchar*, ushort*); -+ -+extern void BlockMapShort2Complex (int, ushort*, ComplexByte*, ComplexShort*); -+extern void BlockMapShort2Short (int size, ushort *srcPtr, short *mapPtr, short *dstPtr); -+extern void BlockMapByte2Byte (int size, uchar *srcPtr, uchar *mapPtr, uchar *dstPtr); -+extern void BlockMapByte2Short (int size, uchar *srcPtr, short *mapPtr, short *dstPtr); -+extern void BlockShortMult (int size, int shift, short* src1Ptr, short* src2Ptr, short* dstPtr); -+ -+extern int SM_DECL Idle(void); -+ -+extern void BlockGenerateAngles(int size, ComplexShort *anglePtr, ComplexShort *incPtr, ComplexShort *dstPtr); -+extern void BlockExtractRealPart(int size, ComplexShort *srcPtr, short *dstPtr); -+extern void BlockShortScaleByShift (int size, int shift, short* srcPtr, short* dstPtr); -+ -+#ifndef PENTIUM_REDEFS /* only if these have not been redefined to function pointers */ -+extern long BlockPower (int, short*); -+extern void BlockReal2ComplexMacc (int, int, short*, ComplexShort*, ComplexLong*); -+extern void BlockComplexMult (int, ComplexShort*, ComplexShort*, ComplexShort*); -+extern void BlockShortScale (int, short, int, short*, short*); -+extern int SM_DECL BlockShortMove (int, short*, short*); -+extern long BlockCorrelate (int, short*, short*); -+ -+extern void BlockRealScaleComplexSymbols(int, int, uchar*, short*, ComplexShort*, ComplexShort*); -+/* FIXME -- the following 3 functions can be removed */ -+extern void BlockCplxScaleComplexSymbols(int, int, int, ComplexShort*, ComplexShort*, ComplexShort*); -+extern void BlockCplxSymbolUpdateCplxScale(int, int, int, uchar*, ComplexShort*, -+ ComplexShort*, ComplexShort*, ComplexShort*); -+extern void BlockComplexShortFill (int, short, short, ComplexShort*); -+ -+ -+extern void BlockRealScaleCplxSymbols(int, int, int, short*, ComplexShort*, ComplexShort*); -+extern void BlockCplxLongConjigateMultCplxShort(int, ComplexLong*, ComplexShort*, ComplexLong*); -+ -+extern void BlockCplxLongScaleCplxSymbols(int, int, int, ComplexLong*, ComplexShort*, short*, ComplexShort*); -+extern void BlockCplxSymbolUpdateCplxLongScale(int, int, int, int, -+ ComplexShort*, short *, ComplexLong*, ComplexShort*); -+ -+extern void BlockComplexLongFill (int, long, long, ComplexLong*); -+ -+extern void BlockShortSubtract (int, short*, short*, short*); -+extern void BlockLongSubtract (int, long*, long*, long*); -+extern void BlockShortAdd (int, short*, short*, short*); -+extern void BlockByteMove (int, uchar*, uchar*); -+extern void BlockByteMoveByLong (int, uchar*, uchar*); -+extern void SM_DECL BlockByteFill (int, uchar, uchar*); -+extern void BlockByteFillByLong (int, uchar, uchar*); -+extern void BlockByteClear (int, uchar*); -+extern void BlockByteClearByLong (int, uchar*); -+extern void BlockShortFill (int, short, short*); -+extern void BlockShortClear (int, short*); -+extern void BlockShortClearByLong (int, short*); -+extern void BlockLongFill (int, long, long*); -+extern void BlockLongClear (int, long*); -+extern void BlockComplexShortClear (int, ComplexShort*); -+extern void BlockShortInvert (int, short*, short*); -+extern void BlockShortScaleDown (int, short*); -+extern void BlockLongMove (int, long*, long*); -+extern void BlockShortInterpolate (int, short, int, short*, short*, short*); -+extern void BlockComplexMultLongAcc (int, int, ComplexShort*, ComplexShort*, ComplexLong*); -+ -+#endif -+ -+#endif /* BlockUtilPh */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/CircBuf.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/CircBuf.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/CircBuf.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/CircBuf.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,217 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * CircBuf -- Generic Circular Buffer -+ * -+ * Description: -+ * Implementation of generic circular buffer algorithms -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.14 $ -+ * -+ * $Id: CircBuf.h,v 1.14 2004/06/24 03:10:37 ilyas Exp $ -+ * -+ * $Log: CircBuf.h,v $ -+ * Revision 1.14 2004/06/24 03:10:37 ilyas -+ * Added extra macro to be able to use un-cached variable (for status write) -+ * -+ * Revision 1.13 2004/02/09 23:47:02 ilyas -+ * Fixed last change -+ * -+ * Revision 1.12 2004/02/06 22:52:58 ilyas -+ * Improved stretch buffer write -+ * -+ * Revision 1.11 2002/12/30 23:27:55 ilyas -+ * Added macro for HostDma optimizations -+ * -+ * Revision 1.10 2002/10/26 02:15:02 ilyas -+ * Optimized and added new macros for HostDma -+ * -+ * Revision 1.9 2002/01/22 23:59:29 ilyas -+ * Added paraenthesis around macro argument -+ * -+ * Revision 1.8 2002/01/15 22:28:38 ilyas -+ * Extended macro to support readPtr from uncached address -+ * -+ * Revision 1.7 2001/09/21 19:47:05 ilyas -+ * Fixed compiler warnings for VxWorks build -+ * -+ * Revision 1.6 2001/06/07 18:47:56 ilyas -+ * Added more macros for circular buffer arithmetics -+ * -+ * Revision 1.5 2001/04/18 03:58:34 ilyas -+ * Added LOG file write granularity -+ * -+ * Revision 1.4 2001/01/19 04:34:12 ilyas -+ * Added more macros to circular buffer implementation -+ * -+ * Revision 1.3 2001/01/06 04:01:41 ilyas -+ * Changed the way we write status messages -+ * -+ * Revision 1.2 2001/01/04 05:52:21 ilyas -+ * Added implementation of stretchable circular buffer used in LOG and Status -+ * handlers -+ * -+ * Revision 1.1 2000/05/03 03:45:55 ilyas -+ * Original implementation -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef CircBufHeader_H_ -+#define CircBufHeader_H_ -+ -+ -+typedef struct { -+ char *pStart; -+ char *pEnd; -+ char *pRead; -+ char *pWrite; -+} circBufferStruct; -+ -+/* Initialize circular buffer */ -+ -+#define CircBufferInit(pCB,buf,size) do { \ -+ (pCB)->pStart = (char *) (buf); \ -+ (pCB)->pRead = (pCB)->pWrite = (pCB)->pStart; \ -+ (pCB)->pEnd = (pCB)->pStart + size; \ -+} while (0) -+ -+#define CircBufferGetSize(pCB) ((pCB)->pEnd - (pCB)->pStart) -+#define CircBufferGetStartPtr(pCB) ((void *) (pCB)->pStart) -+#define CircBufferGetEndPtr(pCB) ((void *) (pCB)->pEnd) -+ -+#define CircBufferReset(pCB) (pCB)->pRead = (pCB)->pWrite = (pCB)->pStart -+ -+ -+#define CircBufferGetReadPtr(pCB) ((void *) (pCB)->pRead) -+#define CircBufferGetWritePtr(pCB) ((void *) (pCB)->pWrite) -+ -+ -+#ifndef bcm47xx -+#define CircBufferDistance(pCB,p1,p2,d) ((char*)(p2) - (char*)(p1) - d >= 0 ? \ -+ (char*)(p2) - (char*)(p1) - d : \ -+ ((char*)(p2)- (char*)(p1) - d + ((pCB)->pEnd - (pCB)->pStart))) -+ -+#define CircBufferAddContig(pCB,p,n) ((char*)(p) + (n) == (pCB)->pEnd ? (pCB)->pStart : (char*)(p) + (n)) -+#else -+static __inline int CircBufferDistance(circBufferStruct *pCB, char *p1, char *p2, int d) -+{ -+ int tmp = p2 - p1 - d; -+ -+ return (tmp >= 0 ? tmp : tmp + (pCB->pEnd - pCB->pStart)); -+} -+ -+static __inline char * CircBufferAddContig(circBufferStruct *pCB, char *p, int n) -+{ -+ p += n; -+ return (p == pCB->pEnd ? pCB->pStart : p); -+} -+#endif -+ -+#define CircBufferAdd(pCB,p,n) ((char*)(p) + (n) >= (pCB)->pEnd ? \ -+ (pCB)->pStart + ((char*)(p) + (n) - (pCB)->pEnd) : \ -+ (char*)(p) + (n)) -+ -+#define CircBufferReadUpdate(pCB,n) (pCB)->pRead = CircBufferAdd(pCB,(pCB)->pRead,n) -+#define CircBufferWriteUpdate(pCB,n) (pCB)->pWrite= CircBufferAdd(pCB,(pCB)->pWrite,n) -+ -+#define CircBufferReadUpdateContig(pCB,n) (pCB)->pRead = CircBufferAddContig(pCB,(pCB)->pRead,n) -+#define CircBufferWriteUpdateContig(pCB,n) (pCB)->pWrite= CircBufferAddContig(pCB,(pCB)->pWrite,n) -+ -+#define CircBufferGetReadAvail(pCB) CircBufferDistance(pCB,(pCB)->pRead,(pCB)->pWrite,0) -+#define CircBufferIsReadEmpty(pCB) ((pCB)->pRead == (pCB)->pWrite) -+#define CircBufferGetWriteAvail(pCB) CircBufferDistance(pCB,(pCB)->pWrite,(pCB)->pRead,1) -+#define CircBufferGetWriteAvailN(pCB,n) CircBufferDistance(pCB,(pCB)->pWrite,(pCB)->pRead,n) -+ -+#define CircBufferGetReadContig(pCB) ((unsigned long)(pCB)->pWrite >= (unsigned long) (pCB)->pRead ? \ -+ (pCB)->pWrite - (pCB)->pRead : \ -+ (pCB)->pEnd - (pCB)->pRead) -+ -+#define CircBufferGetWriteContig(pCB) ((pCB)->pEnd - (pCB)->pWrite > CircBufferGetWriteAvail(pCB) ? \ -+ CircBufferGetWriteAvail(pCB) : \ -+ (pCB)->pEnd - (pCB)->pWrite) -+ -+/* -+** -+** structure and macros for "strectch" buffer -+** -+*/ -+ -+typedef struct { -+ char *pStart; -+ char *pEnd; -+ char *pExtraEnd; -+ char *pStretchEnd; -+ char *pRead; -+ char *pWrite; -+} stretchBufferStruct; -+ -+#define StretchBufferInit(pSB,buf,size,extra) do { \ -+ (pSB)->pStart = (char *) (buf); \ -+ (pSB)->pRead = (pSB)->pWrite = (pSB)->pStart; \ -+ (pSB)->pEnd = (pSB)->pStart + (size); \ -+ (pSB)->pStretchEnd = (pSB)->pEnd; \ -+ (pSB)->pExtraEnd = (pSB)->pEnd+(extra); \ -+} while (0) -+ -+#define StretchBufferGetSize(pSB) ((pSB)->pEnd - (pSB)->pStart) -+#define StretchBufferGetStartPtr(pSB) ((void *) (pSB)->pStart) -+#define StretchBufferGetReadPtr(pSB) ((void *) (pSB)->pRead) -+#define StretchBufferGetWritePtr(pSB) ((void *) (pSB)->pWrite) -+#define StretchBufferReset(pSB) ((pSB)->pRead = (pSB)->pWrite = (pSB)->pStart) -+ -+#define StretchBufferGetReadToEnd(pSB) ((pSB)->pStretchEnd - (pSB)->pRead) -+ -+#define StretchBufferGetReadAvail(pSB) ((pSB)->pWrite - (pSB)->pRead >= 0 ? \ -+ (pSB)->pWrite - (pSB)->pRead : \ -+ (pSB)->pStretchEnd - (pSB)->pRead) -+#define _StretchBufferGetWriteAvail(pSB,rd) ((rd) - (pSB)->pWrite > 0 ? \ -+ (rd) - (pSB)->pWrite - 1 : \ -+ ((pSB)->pExtraEnd - (pSB)->pWrite)) -+#define StretchBufferGetWriteAvail(pSB) _StretchBufferGetWriteAvail(pSB, (pSB)->pRead) -+ -+#define StretchBufferReadUpdate(pSB,n) do { \ -+ char *p; \ -+ \ -+ p = (pSB)->pRead + (n); \ -+ (pSB)->pRead = (p >= (pSB)->pStretchEnd ? (pSB)->pStart : p); \ -+} while (0) -+ -+#define _StretchBufferWriteUpdate(pSB,rd,n) do { \ -+ char *p; \ -+ \ -+ p = (pSB)->pWrite + (n); \ -+ if (p >= (pSB)->pEnd) { \ -+ if ((rd) != (pSB)->pStart) { \ -+ (pSB)->pStretchEnd = p; \ -+ (pSB)->pWrite = (pSB)->pStart; \ -+ } \ -+ } \ -+ else \ -+ (pSB)->pWrite = p; \ -+} while (0) -+ -+#define StretchBufferWriteUpdate(pSB,n) _StretchBufferWriteUpdate(pSB,(pSB)->pRead,n) -+ -+#endif /* CircBufHeader_H_ */ -+ -+ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/DList.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/DList.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/DList.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/DList.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,131 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * DList.h -+ * -+ * Description: -+ * Definition and implementation (via macros and inline functions) -+ * of double-linked list -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ *****************************************************************************/ -+ -+#ifndef DListHeader_H_ -+#define DListHeader_H_ -+ -+typedef struct _DListHeader -+ { -+ struct _DListHeader *next; /* next item in the list */ -+ struct _DListHeader *prev; /* prev item in the list */ -+ } DListHeader; -+ -+typedef struct _DListUpHeader -+ { -+ struct _DListUpHeader *next; /* next item in the list */ -+ struct _DListUpHeader *prev; /* prev item in the list */ -+ struct _DListUpHeader *head; /* head of the list */ -+ } DListUpHeader; -+ -+/* Double linked list DList management macros */ -+ -+#define DListInit(pDListHead) do { \ -+ ((DListHeader *)(pDListHead))->next = pDListHead; \ -+ ((DListHeader *)(pDListHead))->prev = pDListHead; \ -+} while (0) -+ -+#define DListNext(pDListEntry) (((DListHeader *)(pDListEntry))->next) -+#define DListPrev(pDListEntry) (((DListHeader *)(pDListEntry))->prev) -+ -+#define DListEntryLinked(pDListEntry) (NULL != DListNext(pDListEntry)) -+#define DListUnlinkEntry(pDListEntry) (DListNext(pDListEntry) = DListPrev(pDListEntry) = NULL) -+ -+#define DListFirst(pDListHead) DListNext(pDListHead) -+#define DListLast(pDListHead) DListPrev(pDListHead) -+#define DListValid(pDListHead,pEntry) ((void *)(pDListHead) != (pEntry)) -+#define DListEmpty(pDListHead) ((void *)pDListHead == ((DListHeader *)pDListHead)->next) -+ -+#define DListInsertAfter(pDListEntry,pEntry) do { \ -+ ((DListHeader *)(pEntry))->next = ((DListHeader *)(pDListEntry))->next; \ -+ ((DListHeader *)(pEntry))->prev = (DListHeader *)(pDListEntry); \ -+ ((DListHeader *)(pDListEntry))->next->prev = (DListHeader *) (pEntry); \ -+ ((DListHeader *)(pDListEntry))->next = (DListHeader *) (pEntry); \ -+} while (0) -+ -+#define DListInsertBefore(pDListEntry,pEntry) do { \ -+ ((DListHeader *)(pEntry))->next = (DListHeader *)(pDListEntry); \ -+ ((DListHeader *)(pEntry))->prev = ((DListHeader *)(pDListEntry))->prev; \ -+ ((DListHeader *)(pDListEntry))->prev->next = (DListHeader *) (pEntry); \ -+ ((DListHeader *)(pDListEntry))->prev = (DListHeader *) (pEntry); \ -+} while (0) -+ -+#define DListInsertTail(pDListHead,pEntry) DListInsertBefore(pDListHead,pEntry) -+#define DListInsertHead(pDListHead,pEntry) DListInsertAfter(pDListHead,pEntry) -+ -+#define DListRemove(pDListEntry) do { \ -+ ((DListHeader *)(pDListEntry))->prev->next = ((DListHeader *)(pDListEntry))->next; \ -+ ((DListHeader *)(pDListEntry))->next->prev = ((DListHeader *)(pDListEntry))->prev; \ -+} while (0) -+ -+ -+#define DListForEach(pDListHead,f,ref) do { \ -+ DListHeader *p = ((DListHeader *)(pDListHead))->next; \ -+ \ -+ while (DListValid(pDListHead,p)) { \ -+ DListHeader *p0 = p; \ -+ p = DListNext(p); \ -+ if ( (f)((void *)p0, ref) ) break; \ -+ } \ -+} while (0) -+ -+ -+/* Double linked list with up link DListUp management macros */ -+ -+#define DListUpInit(pDListHead) do { \ -+ ((DListUpHeader *)(pDListHead))->next = (DListUpHeader *) (pDListHead); \ -+ ((DListUpHeader *)(pDListHead))->prev = (DListUpHeader *) (pDListHead); \ -+ ((DListUpHeader *)(pDListHead))->head = (DListUpHeader *) (pDListHead); \ -+} while (0) -+ -+#define DListUpNext(pDListEntry) ((DListUpHeader *) DListNext(pDListEntry)) -+#define DListUpPrev(pDListEntry) ((DListUpHeader *) DListPrev(pDListEntry)) -+#define DListUpHead(pDListEntry) (((DListUpHeader *)(pDListEntry))->head) -+ -+#define DListUpFirst(pDListHead) DListUpNext(pDListHead) -+#define DListUpLast(pDListHead) DListUpPrev(pDListHead) -+#define DListUpValid(pEntry) (((DListUpHeader *)(pEntry))->head != (void *) pEntry) -+#define DListUpEmpty(pDListHead) DListEmpty(pDListHead) -+ -+#define DListUpInsertAfter(pDListEntry,pEntry) do { \ -+ DListInsertAfter(pDListEntry,pEntry); \ -+ ((DListUpHeader *)(pEntry))->head = ((DListUpHeader *)(pDListEntry))->head; \ -+} while (0) -+ -+#define DListUpInsertBefore(pDListEntry,pEntry) do { \ -+ DListInsertBefore(pDListEntry,pEntry); \ -+ ((DListUpHeader *)(pEntry))->head = ((DListUpHeader *)(pDListEntry))->head; \ -+} while (0) -+ -+#define DListUpInsertTail(pDListHead,pEntry) DListUpInsertBefore(pDListHead,pEntry) -+#define DListUpInsertHead(pDListHead,pEntry) DListUpInsertAfter(pDListHead,pEntry) -+ -+#define DListUpRemove(pDListEntry) DListRemove(pDListEntry) -+#define DListUpForEach(pDListHead,f,ref) DListForEach((DListHeader *)(pDListHead),f,ref) -+ -+#endif /* DListHeader_H_ */ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/DslFramer.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/DslFramer.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/DslFramer.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/DslFramer.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,159 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * DslFramer.h -+ * -+ * Description: -+ * This file contains common DSL framer definitions -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.3 $ -+ * -+ * $Id: DslFramer.h,v 1.3 2004/07/21 01:39:41 ilyas Exp $ -+ * -+ * $Log: DslFramer.h,v $ -+ * Revision 1.3 2004/07/21 01:39:41 ilyas -+ * Reset entire G.997 state on retrain. Timeout in G.997 if no ACK -+ * -+ * Revision 1.2 2004/04/12 23:41:10 ilyas -+ * Added standard header for shared ADSL driver files -+ * -+ * Revision 1.1 2001/12/13 02:28:27 ilyas -+ * Added common framer (DslPacket and G997) and G997 module -+ * -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef DslFramerHeader -+#define DslFramerHeader -+ -+#include "DList.h" -+ -+#define kDslFramerInitialized 0x80000000 -+ -+/* status codes */ -+ -+#define kDslFramerRxFrame 1 -+#define kDslFramerRxFrameErr 2 -+#define kDslFramerTxFrame 3 -+#define kDslFramerTxFrameErr 4 -+ -+#define kDslFramerRxFrameErrFlushed 1 -+#define kDslFramerRxFrameErrAbort 2 -+#define kDslFramerRxFrameErrPhy 3 -+ -+#define kDslFramerTxFrameErrFlushed 1 -+ -+ -+typedef struct _dslFramerBufDesc { -+ long pkId; -+ long bufFlags; -+ void *bufPtr; -+ long bufLen; -+} dslFramerBufDesc; -+ -+/* data bufDesc flags */ -+ -+#define kDslFramerStartNewFrame 1 -+#define kDslFramerEndOfFrame 2 -+#define kDslFramerAbortFrame 4 -+ -+#define kDslFramerExtraByteShift 3 -+#define kDslFramerExtraByteMask (0x7 << kDslFramerExtraByteShift) -+ -+typedef struct _dslFramerControl { -+ bitMap setup; -+ dslFrameHandlerType rxIndicateHandlerPtr; -+ dslFrameHandlerType txCompleteHandlerPtr; -+ dslStatusHandlerType statusHandlerPtr; -+ ulong statusCode; -+ ulong statusOffset; -+ -+ int nRxBuffers; -+ int nRxBufSize; -+ int nRxPackets; -+ -+ dslFrame *freeBufListPtr; -+ void *freeBufPool; -+ void *pBufMemory; -+ -+ dslFrame *freePacketListPtr; -+ void *freePacketPool; -+ -+ /* RX working data set */ -+ -+ dslFrame *pRxFrame; -+ dslFrameBuffer *pRxBuf; -+ uchar *pRxBufData; -+ uchar *pRxBufDataEnd; -+ int rxFrameLen; -+ -+ /* TX working data set */ -+ -+ DListHeader dlistTxWaiting; -+ dslFrame *pTxFrame; -+ dslFrameBuffer *pTxBuf; -+ uchar *pTxBufData; -+ uchar *pTxBufDataEnd; -+ -+ /* stats data */ -+ -+ ulong dslByteCntRxTotal; -+ ulong dslByteCntTxTotal; -+ -+ ulong dslFrameCntRxTotal; -+ ulong dslFrameCntRxErr; -+ ulong dslFrameCntTxTotal; -+ -+} dslFramerControl; -+ -+ -+extern Boolean DslFramerInit( -+ void *gDslVars, -+ dslFramerControl *dfCtrl, -+ bitMap setup, -+ ulong statusCode, -+ ulong statusOffset, -+ dslFrameHandlerType rxIndicateHandlerPtr, -+ dslFrameHandlerType txCompleteHandlerPtr, -+ dslStatusHandlerType statusHandlerPtr, -+ ulong rxBufNum, -+ ulong rxBufSize, -+ ulong rxPacketNum); -+extern void DslFramerClose(void *gDslVars, dslFramerControl *dfCtrl); -+extern void DslFramerSendFrame(void *gDslVars, dslFramerControl *dfCtrl, dslFrame *pFrame); -+extern void DslFramerReturnFrame(void *gDslVars, dslFramerControl *dfCtrl, dslFrame *pFrame); -+ -+ -+extern Boolean DslFramerRxGetPtr(void *gDslVars, dslFramerControl *dfCtrl, dslFramerBufDesc *pBufDesc); -+extern void DslFramerRxDone (void *gDslVars, dslFramerControl *dfCtrl, dslFramerBufDesc *pBufDesc); -+extern Boolean DslFramerTxGetPtr(void *gDslVars, dslFramerControl *dfCtrl, dslFramerBufDesc *pBufDesc); -+extern void DslFramerTxDone(void *gDslVars, dslFramerControl *dfCtrl, dslFramerBufDesc *pBufDesc); -+extern Boolean DslFramerTxIdle (void *gDslVars, dslFramerControl *dfCtrl); -+extern void DslFramerTxFlush(void *gDslVars, dslFramerControl *dfCtrl); -+ -+extern void * DslFramerGetFramePoolHandler(dslFramerControl *dfCtrl); -+extern void DslFramerClearStat(dslFramerControl *dfCtrl); -+ -+extern void DslFramerRxFlushFrame (void *gDslVars, dslFramerControl *dfCtrl, int errCode); -+extern void DslFramerRxFlush(void *gDslVars, dslFramerControl *dfCtrl); -+ -+#endif /* DslFramerHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/Flatten.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/Flatten.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/Flatten.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/Flatten.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,115 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * Flatten.h -- Header for Flatten/Unflatten command/status -+ * -+ * Copyright (c) 1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.14 $ -+ * -+ * $Id: Flatten.h,v 1.14 2004/03/04 19:48:52 linyin Exp $ -+ * -+ * $Log: Flatten.h,v $ -+ * Revision 1.14 2004/03/04 19:48:52 linyin -+ * Support adsl2plus -+ * -+ * Revision 1.13 2003/10/17 22:45:14 yongbing -+ * Increase buffer size for large B&G table of G992P3 -+ * -+ * Revision 1.12 2003/08/12 23:16:26 khp -+ * - for Haixiang: added support for ADSL_MARGIN_TWEAK_TEST -+ * -+ * Revision 1.11 2003/02/27 06:33:03 ilyas -+ * Improved free space checking in command buffer (became a problem with -+ * 2 commands SetXmtgain and StartPhy) -+ * -+ * Revision 1.10 2003/01/11 01:27:07 ilyas -+ * Improved checking for available space in status buffer -+ * -+ * Revision 1.9 2002/09/07 01:43:59 ilyas -+ * Added support for OEM parameters -+ * -+ * Revision 1.8 2002/05/16 00:01:52 khp -+ * -added missing #endif -+ * -+ * Revision 1.7 2002/05/15 00:04:48 mprahlad -+ * increase the status buffer size - prevent memory overflow for annexC cases -+ * -+ * Revision 1.6 2002/04/05 04:10:33 linyin -+ * -hack to fit in Annex C firmware in LMEM -+ * -+ * Revision 1.5 2002/04/05 02:45:25 linyin -+ * Make the buffer side larger for annexC -+ * -+ * Revision 1.4 2002/01/30 07:19:06 ilyas -+ * Moved showtime code to LMEM -+ * -+ * Revision 1.3 2001/08/29 02:56:01 ilyas -+ * Added tests for flattening/unflatenning command and statuses (dual mode) -+ * -+ * Revision 1.2 2001/04/25 00:30:54 ilyas -+ * Adjusted MaxFrameLen -+ * -+ * Revision 1.1 2001/04/24 21:41:21 ilyas -+ * Implemented status flattening/unflattaning to transfer statuses between -+ * modules asynchronously through the circular buffer -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef _Flatten_H_ -+#define _Flatten_H_ -+ -+#include "CircBuf.h" -+ -+#ifdef ADSL_MARGIN_TWEAK_TEST -+#define kMaxFlattenedCommandSize 272 /* maximum no. of bytes in flattened cmd */ -+#else -+#define kMaxFlattenedCommandSize 128 /* maximum no. of bytes in flattened cmd */ -+#endif -+#if defined(G992_ANNEXC) || defined(G992P3) -+#if defined(G992P5) -+#define kMaxFlattenedStatusSize 2200 /* maximum no. of bytes in flattened status */ -+#else -+#define kMaxFlattenedStatusSize 1100 /* maximum no. of bytes in flattened status */ -+#endif -+#else -+#define kMaxFlattenedStatusSize 550 /* maximum no. of bytes in flattened status */ -+#endif -+ -+#define kMaxFlattenFramelength (kMaxFlattenedStatusSize - (4*sizeof(long)) - 20) -+ -+extern int SM_DECL FlattenCommand (dslCommandStruct *cmd, ulong *dstPtr, ulong nAvail); -+extern int SM_DECL UnflattenCommand(ulong *srcPtr, dslCommandStruct *cmd); -+extern int SM_DECL FlattenStatus (dslStatusStruct *status, ulong *dstPtr, ulong nAvail); -+extern int SM_DECL UnflattenStatus (ulong *srcPtr, dslStatusStruct *status); -+ -+#define FlattenBufferInit(fb,fbData,bufSize,itemSize) \ -+ StretchBufferInit(fb, fbData, bufSize, itemSize) -+ -+extern int SM_DECL FlattenBufferStatusWrite(stretchBufferStruct *fBuf, dslStatusStruct *status); -+extern int SM_DECL FlattenBufferStatusRead(stretchBufferStruct *fBuf, dslStatusStruct *status); -+ -+extern int SM_DECL FlattenBufferCommandWrite(stretchBufferStruct *fBuf, dslCommandStruct *cmd); -+extern int SM_DECL FlattenBufferCommandRead(stretchBufferStruct *fBuf, dslCommandStruct *cmd); -+ -+#define FlattenBufferReadComplete(fb,nBytes) \ -+ StretchBufferReadUpdate (fb, nBytes) -+ -+#endif /* _Flatten_H_ */ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G992p3OvhMsg.gh linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G992p3OvhMsg.gh ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G992p3OvhMsg.gh 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G992p3OvhMsg.gh 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,110 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * G992p3OvhMsg.gh -+ * -+ * Description: -+ * This is a header file which defines the type for the G992p3 overhead -+ * channel messages global variable structure. -+ * -+ * -+ * Copyright (c) 1999-2003 BroadCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.5 $ -+ * -+ * $Id: G992p3OvhMsg.gh,v 1.5 2004/09/11 03:52:25 ilyas Exp $ -+ * -+ * $Log: G992p3OvhMsg.gh,v $ -+ * Revision 1.5 2004/09/11 03:52:25 ilyas -+ * Added support for overhead message segmentation -+ * -+ * Revision 1.4 2004/07/07 01:27:20 ilyas -+ * Fixed OHC message stuck problem on L2 entry/exit -+ * -+ * Revision 1.3 2004/06/10 00:13:31 ilyas -+ * Added L2/L3 and SRA -+ * -+ * Revision 1.2 2004/04/12 23:34:52 ilyas -+ * Merged the latest ADSL driver chnages for ADSL2+ -+ * -+ * Revision 1.1 2003/07/18 19:39:18 ilyas -+ * Initial G.992.3 overhead channel message implementation (from ADSL driver) -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef G992p3OvhMsgFramerGlobals -+#define G992p3OvhMsgFramerGlobals -+ -+#define kG992p3OvhMsgMaxCmdSize (16 + 16) -+#define kG992p3OvhMsgMaxRspSize (16 + 2*512) -+ -+typedef struct -+ { -+ dslFrame *segFrame; -+ dslFrameBuffer *segFrBufCur; -+ dslFrameBuffer segFrBuf; -+ ulong timeSegOut; -+ uchar tryCnt; -+ uchar segTotal; -+ uchar segId; -+ } -+ g992p3SegFrameCtlStruct; -+ -+typedef struct -+ { -+ bitMap setup; -+ dslFrameHandlerType rxReturnFramePtr; -+ dslFrameHandlerType txSendFramePtr; -+ dslCommandHandlerType cmdHandlerPtr; -+ dslStatusHandlerType statusHandlerPtr; -+ -+ dslFrame txRspFrame; -+ dslFrameBuffer txRspFrBuf; -+ dslFrameBuffer txRspFrBuf1; -+ uchar txRspBuf[kG992p3OvhMsgMaxRspSize]; -+ dslFrame txPwrRspFrame; -+ dslFrameBuffer txPwrRspFrBuf0; -+ dslFrameBuffer txPwrRspFrBuf0a; -+ dslFrameBuffer txPwrRspFrBuf1; -+ uchar txPwrRspBuf0[8]; -+ dslFrame txCmdFrame; -+ dslFrameBuffer txCmdFrBuf0; -+ dslFrameBuffer txCmdFrBuf0a; -+ dslFrameBuffer txCmdFrBuf1; -+ uchar txCmdBuf[kG992p3OvhMsgMaxCmdSize]; -+ g992p3SegFrameCtlStruct txSegFrameCtl; -+ ulong txFlags; -+ uchar txL0Rq; -+ uchar txL3Rq; -+ -+ ulong timeMs; -+ ulong timeCmdOut; -+ ulong cmdTryCnt; -+ ulong cmdNum; -+ ulong timeRspOut; -+ uchar *txPmdCmd; -+ -+ uchar rxCmdMsgNum; -+ uchar rxRspMsgNum; -+ uchar txCmdMsgNum; -+ uchar txRspMsgNum; -+ } -+ g992p3OvhMsgVarsStruct; -+ -+#endif /* G992p3OvhMsgFramerGlobals */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G992p3OvhMsg.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G992p3OvhMsg.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G992p3OvhMsg.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G992p3OvhMsg.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,64 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * G992p3OvhMsg.h -+ * -+ * Description: -+ * This file contains the exported functions and definitions for G992p3 -+ * overhead channel messages -+ * -+ * -+ * Copyright (c) 1999-2003 BroadCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.1 $ -+ * -+ * $Id: G992p3OvhMsg.h,v 1.1 2003/07/18 19:39:18 ilyas Exp $ -+ * -+ * $Log: G992p3OvhMsg.h,v $ -+ * Revision 1.1 2003/07/18 19:39:18 ilyas -+ * Initial G.992.3 overhead channel message implementation (from ADSL driver) -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef G992p3OvhMsgFramerHeader -+#define G992p3OvhMsgFramerHeader -+ -+#define kG992p3OvhMsgFrameBufCnt -1 -+ -+extern Boolean G992p3OvhMsgInit( -+ void *gDslVars, -+ bitMap setup, -+ dslFrameHandlerType rxReturnFramePtr, -+ dslFrameHandlerType txSendFramePtr, -+ dslCommandHandlerType commandHandler, -+ dslStatusHandlerType statusHandler); -+ -+extern void G992p3OvhMsgReset(void *gDslVars); -+extern void G992p3OvhMsgClose(void *gDslVars); -+extern void G992p3OvhMsgTimer(void *gDslVars, long timeQ24ms); -+extern Boolean G992p3OvhMsgCommandHandler (void *gDslVars, dslCommandStruct *cmd); -+extern void G992p3OvhMsgStatusSnooper (void *gDslVars, dslStatusStruct *status); -+ -+extern int G992p3OvhMsgSendCompleteFrame(void *gDslVars, void *pVc, ulong mid, dslFrame *pFrame); -+extern int G992p3OvhMsgIndicateRcvFrame(void *gDslVars, void *pVc, ulong mid, dslFrame *pFrame); -+ -+extern void G992p3OvhMsgSetL3(void *gDslVars); -+extern void G992p3OvhMsgSetL0(void *gDslVars); -+ -+#endif /* G992p3OvhMsgFramerHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G997.gh linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G997.gh ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G997.gh 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G997.gh 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,66 @@ -+/**************************************************************************** -+ * -+ * G997.gh -+ * -+ * Description: -+ * This is a header file which defines the type for the G997 Framer -+ * global variable structure. -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.5 $ -+ * -+ * $Id: G997.gh,v 1.5 2004/07/21 01:39:41 ilyas Exp $ -+ * -+ * $Log: G997.gh,v $ -+ * Revision 1.5 2004/07/21 01:39:41 ilyas -+ * Reset entire G.997 state on retrain. Timeout in G.997 if no ACK -+ * -+ * Revision 1.4 2004/04/27 00:27:16 ilyas -+ * Implemented double buffering to ensure G.997 HDLC frame is continuous -+ * -+ * Revision 1.3 2003/07/18 18:56:59 ilyas -+ * Added support for shared TX buffer (for ADSL driver) -+ * -+ * Revision 1.2 2002/01/11 06:48:27 ilyas -+ * Added command handler pointer -+ * -+ * Revision 1.1 2001/12/13 02:28:27 ilyas -+ * Added common framer (DslPacket and G997) and G997 module -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef G997FramerGlobals -+#define G997FramerGlobals -+ -+#include "DslFramer.h" -+#include "HdlcFramer.h" -+ -+#define kG997MsgBufSize 64 -+ -+typedef struct -+ { -+ bitMap setup; -+ dslFramerControl dslFramer; -+ hdlcByteControl hdlcByte; -+ dslCommandHandlerType commandHandler; -+ -+ ulong timeMs; -+ ulong timeCmdOut; -+ -+ uchar rxMsgNum; -+ uchar txMsgNum; -+ Boolean txIdle; -+ uchar txMsgBuf[kG997MsgBufSize]; -+ ulong txMsgBufLen; -+ uchar *txMsgBufPtr; -+ ulong txMsgLen; -+ ulong txMsgBufs; -+ ulong txMsgBufNum; -+ } -+ g997VarsStruct; -+ -+#endif /* G997FramerGlobals */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G997.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G997.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G997.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G997.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,68 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * G997.h -+ * -+ * Description: -+ * This file contains the exported functions and definitions for G97Framer -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.3 $ -+ * -+ * $Id: G997.h,v 1.3 2003/07/18 18:56:59 ilyas Exp $ -+ * -+ * $Log: G997.h,v $ -+ * Revision 1.3 2003/07/18 18:56:59 ilyas -+ * Added support for shared TX buffer (for ADSL driver) -+ * -+ * Revision 1.2 2002/07/20 00:51:41 ilyas -+ * Merged witchanges made for VxWorks/Linux driver. -+ * -+ * Revision 1.1 2001/12/13 02:28:27 ilyas -+ * Added common framer (DslPacket and G997) and G997 module -+ * -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef G997FramerHeader -+#define G997FramerHeader -+ -+extern Boolean G997Init( -+ void *gDslVars, -+ bitMap setup, -+ ulong rxBufNum, -+ ulong rxBufSize, -+ ulong rxPacketNum, -+ upperLayerFunctions *pUpperLayerFunctions, -+ dslCommandHandlerType g997PhyCommandHandler); -+ -+extern void G997Close(void *gDslVars); -+extern void G997Timer(void *gDslVars, long timeQ24ms); -+extern Boolean G997CommandHandler (void *gDslVars, dslCommandStruct *cmd); -+extern void G997StatusSnooper (void *gDslVars, dslStatusStruct *status); -+ -+extern int G997SendFrame(void *gDslVars, void *pVc, ulong mid, dslFrame *pFrame); -+extern int G997ReturnFrame(void *gDslVars, void *pVc, ulong mid, dslFrame *pFrame); -+ -+extern Boolean G997SetTxBuffer(void *gDslVars, ulong len, void *bufPtr); -+extern void * G997GetFramePoolHandler(void *gDslVars); -+ -+#endif /* G997FramerHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/HdlcFramer.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/HdlcFramer.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/HdlcFramer.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/HdlcFramer.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,237 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * HdlcFramer.h -+ * -+ * Description: -+ * This file contains common HDLC definitions for bit/byte stuffing -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.3 $ -+ * -+ * $Id: HdlcFramer.h,v 1.3 2004/07/21 01:39:41 ilyas Exp $ -+ * -+ * $Log: HdlcFramer.h,v $ -+ * Revision 1.3 2004/07/21 01:39:41 ilyas -+ * Reset entire G.997 state on retrain. Timeout in G.997 if no ACK -+ * -+ * Revision 1.2 2003/07/18 18:51:05 ilyas -+ * Added mode (default) to pass address and control field -+ * -+ * Revision 1.1 2001/12/13 02:28:27 ilyas -+ * Added common framer (DslPacket and G997) and G997 module -+ * -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef HdlcFramerHeader -+#define HdlcFramerHeader -+ -+/* setup bitmap definitions */ -+ -+#define kHdlcSetupShift 16 -+#define kHdlcSetupMask ((long)0xFFFF << kHdlcSetupShift) -+ -+#define kHdlcCrcMask 0x00030000 -+#define kHdlcCrcNone 0x00000000 -+#define kHdlcCrc16 0x00010000 -+#define kHdlcCrc32 0x00020000 -+ -+#define kHdlcTxIdleStop 0x00040000 -+#define kHdlcSpecialAddrCtrl 0x00080000 -+ -+extern ushort HdlcCrc16Table[]; -+ -+#define HDLC16_CRC_INIT 0xFFFF -+#define HDLC16_CRC_FINAL(crc) ((crc) ^ 0xFFFF) -+#define HDLC16_GOOD_CRC 0xF0B8 -+#define Hdlc16UpdateCrc(crc,b) ((crc) >> 8) ^ HdlcCrc16Table[((crc) ^ (b)) & 0xFF] -+ -+extern ulong HdlcCrc32Table[]; -+ -+#define HDLC32_CRC_INIT 0xFFFFFFFF -+#define HDLC32_CRC_FINAL(crc) ((crc) ^ 0xFFFFFFFF) -+#define HDLC32_GOOD_CRC 0xDEBB20E3 -+#define Hdlc32UpdateCrc(crc,b) ((crc) >> 8) ^ HdlcCrc32Table[((crc) ^ (b)) & 0xFF] -+ -+extern ulong HdlcCrc32Table[]; -+ -+/* HDLC common fields */ -+ -+#define HDLC_ADDR 0xFF -+#define HDLC_CTRL 0x3 -+ -+#define HDLC_BYTE_FLAG 0x7E -+#define HDLC_BYTE_ESC 0x7D -+ -+/* HDLC frame assembly states */ -+ -+#define HDLC_STATE_START_FLAG 0 -+#define HDLC_STATE_ADDRESS (HDLC_STATE_START_FLAG + 1) -+#define HDLC_STATE_CONTROL (HDLC_STATE_START_FLAG + 2) -+#define HDLC_STATE_DATA (HDLC_STATE_START_FLAG + 3) -+#define HDLC_STATE_FCS1 (HDLC_STATE_START_FLAG + 4) -+#define HDLC_STATE_FCS2 (HDLC_STATE_START_FLAG + 5) -+#define HDLC_STATE_END_FLAG (HDLC_STATE_START_FLAG + 6) -+ -+ -+/* HDLC common types */ -+ -+typedef struct _hdlcByteControl { -+ bitMap setup; -+ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler; -+ dslFramerDataDoneHandlerType rxDataDoneHandler; -+ dslFramerDataGetPtrHandlerType txDataGetPtrHandler; -+ dslFramerDataDoneHandlerType txDataDoneHandler; -+ -+ /* RX working data set */ -+ -+ uchar rxFrameState; -+ int rxFrameLen; -+ ulong rxCrc; -+ Boolean rxEscChar; -+ -+ uchar *pRxData; -+ uchar *pRxDataEnd; -+ long rxDataLen; -+ -+ /* TX working data set */ -+ -+ uchar txFrameState; -+ int txFrameLen; -+ ulong txCrc; -+ int txCharPending; -+ -+ uchar *pTxData; -+ uchar *pTxDataEnd; -+ long txDataLen; -+} hdlcByteControl; -+ -+typedef struct _hdlcBitControl { -+ bitMap setup; -+ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler; -+ dslFramerDataDoneHandlerType rxDataDoneHandler; -+ dslFramerDataGetPtrHandlerType txDataGetPtrHandler; -+ dslFramerDataDoneHandlerType txDataDoneHandler; -+ -+ /* RX working data set */ -+ -+ uchar rxFrameState; -+ int rxFrameLen; -+ ulong rxCrc; -+ int rxNibblePending; -+ int rxOutVal; -+ uchar rxOutBits; -+ uchar rxRem1Bits; -+ Boolean rxEscChar; /* ???? */ -+ -+ uchar *pRxData; -+ uchar *pRxDataEnd; -+ long rxDataLen; -+ -+ /* TX working data set */ -+ -+ uchar txFrameState; -+ int txFrameLen; -+ ulong txCrc; -+ int txOutVal; -+ uchar txOutBits; -+ uchar txLast1Bits; -+ int txCharPending; /* ???? */ -+ -+ uchar *pTxData; -+ uchar *pTxDataEnd; -+ long txDataLen; -+} hdlcBitControl; -+ -+/* HDLC common functions */ -+ -+#define HdlcFramerTxFrameInit(ctrl) do { \ -+ ctrl->txFrameState = HDLC_STATE_START_FLAG; \ -+ ctrl->txFrameLen = 0; \ -+ ctrl->txCrc = HDLC16_CRC_INIT; \ -+ ctrl->txCharPending= -1; \ -+} while (0) -+ -+#define HdlcFramerRxFrameInit(ctrl) do { \ -+ ctrl->rxFrameState = HDLC_STATE_START_FLAG; \ -+ ctrl->rxFrameLen = 0; \ -+ ctrl->rxCrc = HDLC16_CRC_INIT; \ -+ ctrl->rxEscChar = false; \ -+} while (0) -+ -+#define HdlcFramerTxGetData(ctrl) do { \ -+ dslFramerBufDesc bufDesc; \ -+ \ -+ if ((ctrl->txDataGetPtrHandler) (gDslVars, &bufDesc)) { \ -+ ctrl->pTxData = bufDesc.bufPtr; \ -+ ctrl->pTxDataEnd = (uchar*)bufDesc.bufPtr + bufDesc.bufLen; \ -+ ctrl->txDataLen = bufDesc.bufLen; \ -+ if (bufDesc.bufFlags & kDslFramerStartNewFrame) \ -+ HdlcFramerTxFrameInit(ctrl); \ -+ } \ -+ else { \ -+ HdlcFramerTxFrameInit(ctrl); \ -+ } \ -+} while (0); -+ -+#define HdlcFramerRxGetData(ctrl, frFlag) do { \ -+ dslFramerBufDesc bufDesc; \ -+ \ -+ bufDesc.bufFlags = frFlag; \ -+ if ((ctrl->rxDataGetPtrHandler) (gDslVars, &bufDesc)) { \ -+ ctrl->pRxData = bufDesc.bufPtr; \ -+ ctrl->pRxDataEnd = (uchar*)bufDesc.bufPtr + bufDesc.bufLen; \ -+ ctrl->rxDataLen = bufDesc.bufLen; \ -+ } \ -+} while (0); -+ -+/* HDLC functions headers */ -+ -+extern Boolean HdlcByteInit( -+ void *gDslVars, -+ hdlcByteControl *hbyCtrl, -+ bitMap setup, -+ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler, -+ dslFramerDataDoneHandlerType rxDataDoneHandler, -+ dslFramerDataGetPtrHandlerType txDataGetPtrHandler, -+ dslFramerDataDoneHandlerType txDataDoneHandler); -+ -+extern void HdlcByteReset(void *gDslVars, hdlcByteControl *hbyCtrl); -+extern void HdlcByteRxFlush(void *gDslVars, hdlcByteControl *hbyCtrl); -+extern int HdlcByteRx(void *gDslVars, hdlcByteControl *hbyCtrl, int nBytes, uchar *srcPtr) FAST_TEXT; -+extern int HdlcByteTx(void *gDslVars, hdlcByteControl *hbyCtrl, int nBytes, uchar *dstPtr) FAST_TEXT; -+extern Boolean HdlcByteTxIdle(void *gDslVars, hdlcByteControl *hbyCtrl); -+ -+extern Boolean HdlcBitInit( -+ void *gDslVars, -+ hdlcBitControl *hbiCtrl, -+ bitMap setup, -+ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler, -+ dslFramerDataDoneHandlerType rxDataDoneHandler, -+ dslFramerDataGetPtrHandlerType txDataGetPtrHandler, -+ dslFramerDataDoneHandlerType txDataDoneHandler); -+ -+extern void HdlcBitReset(void *gDslVars, hdlcByteControl *hbiCtrl); -+extern int HdlcBitRx(void *gDslVars, hdlcBitControl *hbiCtrl, int nBytes, uchar *srcPtr) FAST_TEXT; -+extern int HdlcBitTx(void *gDslVars, hdlcBitControl *hbiCtrl, int nBytes, uchar *dstPtr) FAST_TEXT; -+ -+#endif /* HdlcFramerHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MathUtil.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MathUtil.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MathUtil.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MathUtil.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,135 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/************************************************************************ -+ * -+ * MathUtil.h: -+ * -+ * Description: -+ * This file contains the exported interface for MathUtil.c module. -+ * -+ * -+ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved. -+ * Authors: Mark Gonikberg, Haixiang Liang. -+ * -+ * $Revision: 1.6 $ -+ * -+ * $Id: MathUtil.h,v 1.6 2004/04/13 00:21:13 ilyas Exp $ -+ * -+ * $Log: MathUtil.h,v $ -+ * Revision 1.6 2004/04/13 00:21:13 ilyas -+ * Added standard header for shared ADSL driver files -+ * -+ * Revision 1.5 2001/08/16 02:18:08 khp -+ * - mark functions with FAST_TEXT to reduce cycle counts for QPROC targets -+ * (replaces use of LMEM_INSN) -+ * -+ * Revision 1.4 1999/10/06 04:55:22 liang -+ * Added function to multiply two long values to save result as VeryLong. -+ * -+ * Revision 1.3 1999/08/05 19:42:52 liang -+ * Merged with the softmodem top of the tree on 08/04/99 for assembly files. -+ * -+ * Revision 1.2 1999/03/26 03:29:59 liang -+ * Export CosSin table. -+ * -+ * Revision 1.1 1998/10/28 01:28:07 liang -+ * *** empty log message *** -+ * -+ * Revision 1.12 1998/02/10 17:19:49 scott -+ * Changed MathVL routines to return arguments using pointers -+ * -+ * Revision 1.11 1997/12/13 06:12:07 mwg -+ * Added more Atan2 flavors -+ * -+ * Revision 1.10 1997/11/18 01:11:48 mwg -+ * Removed symbols which accidently slipped in. -+ * -+ * Revision 1.9 1997/11/03 19:07:52 scott -+ * No longer redefine max() and min() if already defined -+ * -+ * Revision 1.8 1997/07/30 01:35:20 liang -+ * Add more accurate atan2 function UtilLongLongAtan2. -+ * -+ * Revision 1.7 1997/07/21 20:23:19 mwg -+ * Added new function: UtilBlockCos() -+ * -+ * Revision 1.6 1997/03/21 23:50:10 liang -+ * Added initial version of V8bis module to CVS tree. -+ * -+ * Revision 1.5 1997/03/19 18:35:34 mwg -+ * Changed copyright notice. -+ * -+ * Revision 1.4 1997/01/21 00:36:15 mwg -+ * Added new function: UtilBlockCosSin() -+ * -+ * Revision 1.3 1996/06/18 21:14:45 mwg -+ * Modified VLDivVL by allowing to specify the result scaling. -+ * -+ * Revision 1.2 1996/06/12 02:31:59 mwg -+ * Added 64bit arithmetic functions. -+ * -+ * Revision 1.1.1.1 1996/02/14 02:35:15 mwg -+ * Redesigned the project directory structure. Merged V.34 into the project. -+ * -+ * Revision 1.4 1995/12/04 23:08:15 liang -+ * Add file Math/LinearToLog.c. -+ * -+ ************************************************************************/ -+#ifndef MathUtilPh -+#define MathUtilPh -+ -+/* Exported tables */ -+extern const short UtilCosTable[]; -+ -+/* Exported functions */ -+extern ComplexShort UtilCosSin(ushort angle); -+extern long UtilBlockCosSin (int nValues, long angle, long delta, ComplexShort *dstPtr); -+extern long UtilBlockCos (int nValues, long angle, long delta, short *dstPtr); -+extern ushort UtilShortShortAtan2(ComplexShort point); -+extern ushort UtilLongShortAtan2(ComplexLong point); -+extern ulong UtilShortLongAtan2(ComplexShort point) FAST_TEXT; -+extern ulong UtilLongLongAtan2(ComplexLong point) FAST_TEXT; -+extern ushort UtilSqrt(ulong y); -+extern ushort UtilMaxMagnitude(int blkSize, ComplexShort *dataPtr); -+extern short UtilQ0LinearToQ4dB (ulong x); -+extern ulong UtilQ4dBToQ12Linear (short x); -+extern void UtilAdjustComplexMagnitude(ComplexShort *srcPtr, short mag, short adjustment); -+ -+extern void VLMultLongByLong(long x, long y, VeryLong *dst); -+extern void VLMultShort (VeryLong x, short y, VeryLong *dst); -+extern void VLAddVL (VeryLong x, VeryLong y, VeryLong *dst); -+extern void VLAddLong (VeryLong x, long y, VeryLong *dst); -+extern void VLSubVL (VeryLong x, VeryLong y, VeryLong *dst); -+extern void VLSubLong (VeryLong x, long y, VeryLong *dst); -+extern void VLDivVL (VeryLong x, VeryLong y, int scale, long *dst); -+extern void VLShiftLeft(VeryLong x, int shift, VeryLong *dst); -+extern void VLShiftRight(VeryLong x, int shift, VeryLong *dst); -+ -+ -+#define UtilAtan2 UtilShortShortAtan2 -+#define UtilLongAtan2 UtilLongShortAtan2 -+ -+/* Standard Macros */ -+#undef abs -+#define abs(x) ((x) >= 0 ? (x) : -(x)) -+ -+#undef max -+#define max(x, y) ((x) >= (y) ? (x) : (y)) -+ -+#undef min -+#define min(x, y) ((x) <= (y) ? (x) : (y)) -+ -+#endif /* MathUtilPh */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MipsAsm.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MipsAsm.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MipsAsm.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MipsAsm.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,264 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/************************************************************************ -+ * -+ * MipsAsm.h: -+ * -+ * Description: -+ * This file contains definitions specific to MIPS assembly -+ * -+ * -+ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved. -+ * Authors: Mark Gonikberg, Haixiang Liang. -+ * -+ * $Revision: 1.5 $ -+ * -+ * $Id: MipsAsm.h,v 1.5 2004/04/13 00:16:59 ilyas Exp $ -+ * -+ * $Log: MipsAsm.h,v $ -+ * Revision 1.5 2004/04/13 00:16:59 ilyas -+ * Merged the latest ADSL driver changes -+ * -+ * Revision 1.4 2002/09/12 04:08:50 ilyas -+ * Added macros for BCM MIPS specific instructions -+ * -+ * Revision 1.3 2000/11/18 21:28:19 mprahlad -+ * ifdef bcm47xx - -+ * define MSUB(src1,src2) msub src1, src2 -+ * change Mult(dst, src1, src2) to use "mul" instead of "mult; mflo" -+ * define Mul(src1, src2) mult src1, src2 -+ * -+ * Revision 1.2 2000/07/28 21:05:05 mprahlad -+ * Macros specific to bcm47xx added. -+ * -+ * Revision 1.1 1999/08/05 19:52:57 liang -+ * Copied from the softmodem top of the tree on 08/04/99. -+ * -+ * Revision 1.5 1999/04/02 23:16:21 mwg -+ * Fixed a minor comatibility issue with mult -+ * -+ * Revision 1.4 1999/02/03 20:25:43 mwg -+ * Added an option for R4010 -+ * -+ * Revision 1.3 1998/10/30 02:21:34 mwg -+ * Added targets for 4640 -+ * -+ * Revision 1.2 1998/10/16 18:52:09 ilyas -+ * Added ASM_PROLOG[5-7] macros to save on stores -+ * -+ * Revision 1.1 1998/06/03 23:28:39 mwg -+ * Renamed from DinoDefs.h -+ * -+ * Revision 1.6 1998/02/09 18:23:11 scott -+ * Added EMBEDDED_CALLING_CONVENTION (GreenHill) and R3900/R4102 -+ * -+ * Revision 1.5 1997/03/19 18:35:02 mwg -+ * Changed copyright notice. -+ * -+ * Revision 1.4 1996/10/02 20:28:41 liang -+ * Remove parameter "acc" from the non-DINO version of MAD. -+ * -+ * Revision 1.3 1996/10/02 19:44:36 liang -+ * Separated MultAdd into MAD and MADW, added NO_DINO_WRITEBACK option. -+ * -+ * Revision 1.2 1996/08/14 03:06:07 liang -+ * Modified macro MultAdd so that the assembly code build works. -+ * -+ * Revision 1.1.1.1 1996/02/14 02:35:13 mwg -+ * Redesigned the project directory structure. Merged V.34 into the project. -+ * -+ * Revision 1.5 1994/11/04 22:41:29 mwg -+ * Added #ifdefs for different targets. -+ * -+ ************************************************************************/ -+ -+#ifndef _MIPS_ASM_H_ -+#define _MIPS_ASM_H_ -+ -+#define zero $0 -+#define v0 $2 -+#define v1 $3 -+#define a0 $4 -+#define a1 $5 -+#define a2 $6 -+#define a3 $7 -+#define t0 $8 -+#define t1 $9 -+#define t2 $10 -+#define t3 $11 -+#define t4 $12 -+#define t5 $13 -+#define t6 $14 -+#define t7 $15 -+#define s0 $16 -+#define s1 $17 -+#define s2 $18 -+#define s3 $19 -+#define s4 $20 -+#define s5 $21 -+#define s6 $22 -+#define s7 $23 -+#define t8 $24 -+#define t9 $25 -+#define k0 $26 -+#define k1 $27 -+#define gp $28 -+#define sp $29 -+#define fp $30 -+#define s8 $30 -+#define ra $31 -+ -+#ifdef EMBEDDED_CALLING_CONVENTION -+ -+/* Support for GreenHills embedded calling convention */ -+ -+#define ASM_PROLOG subu sp, 32; \ -+ sw $8, 16(sp); \ -+ sw $9, 20(sp); \ -+ sw $10, 24(sp); \ -+ sw $11, 28(sp); -+ -+#define ASM_PROLOG5 subu sp, 32; \ -+ sw $8, 16(sp); -+ -+#define ASM_PROLOG6 subu sp, 32; \ -+ sw $8, 16(sp); \ -+ sw $9, 20(sp); -+ -+#define ASM_PROLOG7 subu sp, 32; \ -+ sw $8, 16(sp); \ -+ sw $9, 20(sp); \ -+ sw $10, 24(sp); -+ -+#define ASM_EPILOG addu sp, 32 -+ -+#else -+#define ASM_PROLOG -+#define ASM_PROLOG5 -+#define ASM_PROLOG6 -+#define ASM_PROLOG7 -+#define ASM_EPILOG -+#endif -+ -+#ifdef DINO /* Special DSP extensions to MIPS core */ -+ -+#ifndef NO_DINO_WRITEBACK /* DSP extensions with writeback register */ -+ -+#define MAD(src1, src2) .set noreorder ; mad $0, src1, src2 ; .set reorder -+#define MADW(acc, src1, src2) .set noreorder ; mad acc, src1, src2 ; .set reorder -+#define Mult(dst, src1, src2) .set noreorder ; mult dst, src1, src2 ; .set reorder -+#define MultU(dst, src1, src2) .set noreorder ; multu dst, src1, src2 ; .set reorder -+ -+#else /* NO_DINO_WRITEBACK */ -+ -+#define MAD(src1, src2) .set noreorder ; mad $0, src1, src2 ; .set reorder -+#define MADW(acc, src1, src2) .set noreorder ; mad $0, src1, src2 ; mflo acc ; .set reorder -+#define Mult(dst, src1, src2) multu src1, src2 ; mflo dst -+#define MultU(dst, src1, src2) multu src1, src2 ; mflo dst -+ -+#endif /* NO_DINO_WRITEBACK */ -+ -+#else /* DINO */ -+ -+#if defined(R3900) -+ -+#define MAD(src1, src2) madd $0, src1, src2 -+#define MADW(acc, src1, src2) madd acc, src1, src2 -+#define Mult(dst, src1, src2) mult dst, src1, src2 -+#define MultU(dst, src1, src2) multu dst, src1, src2 -+ -+#elif defined(bcm47xx_INSTR_MACROS) && defined(bcm47xx) -+ -+#define mips_froo(s1,s2,s3) s1##s2##s3 -+#define MSUB(s1,s2) .set noreorder ; mips_froo(msub_,s1,s2) ; .set reorder -+#define MAD(s1,s2) .set noreorder ; mips_froo(mad_,s1,s2) ; .set reorder -+#define MADW(acc, s1,s2) .set noreorder ; mips_froo(mad_,s1,s2) ; mflo acc ; .set reorder -+ -+#include "BCM4710.h" -+ -+#define Mult(dst, src1, src2) mul dst, src1, src2 -+#define Mul( src1, src2) mult src1, src2 ; -+#define MultU(dst, src1, src2) multu src1, src2 ; mflo dst -+ -+#elif defined(bcm47xx) -+#define MSUB(src1, src2) msub src1, src2 -+#define MAD(src1, src2) madd src1, src2 -+#define MADW(acc, src1, src2) .set noreorder ; madd src1, src2; mflo acc ; .set reorder -+/* -+#define Mult(dst, src1, src2) mult src1, src2 ; mflo dst -+*/ -+#define Mult(dst, src1, src2) mul dst , src1, src2 ; -+#define Mul( src1, src2) mult src1, src2 ; -+#define MultU(dst, src1, src2) multu src1, src2 ; mflo dst -+ -+#else -+ -+#ifdef R4102 -+#define MAD(src1, src2) madd16 src1, src2 -+#define MADW(acc, src1, src2) madd16 src1, src2 ; mflo acc -+#else /* R4102 */ -+ -+#ifdef R4640 -+ -+#define MAD(src1, src2) madd $0, src1, src2 -+#define MADW(acc, src1, src2) madd src1, src2; mflo acc -+ -+#else /* R4640 */ -+ -+#ifdef R4010 -+ -+#define MAD(src1, src2) madd src1, src2 -+#define MADW(acc, src1, src2) madd src1, src2; mflo acc -+ -+#else -+#define MAD(src1, src2) .set noat ;\ -+ mflo $at ;\ -+ sw $2, -4(sp) ;\ -+ multu src1, src2 ;\ -+ mflo $2 ;\ -+ addu $at, $2, $at ;\ -+ lw $2, -4(sp) ;\ -+ mtlo $at ;\ -+ .set at -+ -+#define MADW(acc, src1, src2) .set noat ;\ -+ mflo $at ;\ -+ sw $2, -4(sp) ;\ -+ multu src1, src2 ;\ -+ mflo $2 ;\ -+ addu $at, $2, $at ;\ -+ lw $2, -4(sp) ;\ -+ move acc, $at ;\ -+ mtlo $at ;\ -+ .set at -+#endif /* R4010 */ -+#endif /* R4102 */ -+#endif /* R4640 */ -+ -+#define Mult(dst, src1, src2) mul dst, src1, src2 -+#define MultU(dst, src1, src2) multu src1, src2 ; mflo dst -+ -+#endif /* !3900 */ -+#endif /* DINO */ -+ -+ -+ -+ -+ -+ -+ -+ -+#endif /* _MIPS_ASM_H_ */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MiscUtil.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MiscUtil.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MiscUtil.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MiscUtil.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,65 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * MiscUtil.h -- Miscellaneous utilities -+ * -+ * Description: -+ * -+ * -+ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved. -+ * Authors: Mark Gonikberg Haixiang Liang -+ * -+ * $Revision: 1.4 $ -+ * -+ * $Id: MiscUtil.h,v 1.4 2004/04/13 00:21:46 ilyas Exp $ -+ * -+ * $Log: MiscUtil.h,v $ -+ * Revision 1.4 2004/04/13 00:21:46 ilyas -+ * Added standard header for shared ADSL driver files -+ * -+ * Revision 1.3 2001/07/21 01:21:06 ilyas -+ * Added more functions for int to string conversion used by log file -+ * -+ * Revision 1.2 1999/08/05 19:42:56 liang -+ * Merged with the softmodem top of the tree on 08/04/99 for assembly files. -+ * -+ * Revision 1.1 1999/01/27 22:10:12 liang -+ * Initial version. -+ * -+ * Revision 1.1 1997/07/10 01:18:45 mwg -+ * Initial revision. -+ * -+ * -+ * -+ *****************************************************************************/ -+#ifndef _MISC_UTIL_H_ -+#define _MISC_UTIL_H_ -+ -+extern long SM_DECL GetRateValue(dataRateMap rate); -+extern int SM_DECL DecToString(ulong value, uchar *dstPtr, uint nDigits); -+extern int SM_DECL HexToString(ulong value, uchar *dstPtr, uint nDigits); -+extern char * SM_DECL DecToStr(char *s, ulong num); -+extern char * SM_DECL SignedToStr(char *s, long num); -+extern char * SM_DECL HexToStr(char *s, ulong num); -+ -+#define EvenParityBit(x) ((z = (y = x ^ (x >> 4)) ^ (y >> 2)) ^ (z >> 1)) -+#define OddParityBit(x) (EvenParityBit(x) ^ 1) -+ -+extern void ParityApply(int nBytes, int nDataBits, int parity, uchar *srcPtr, uchar *dstPtr); -+extern void ParityStrip(int nBytes, int nDataBits, int parity, uchar *srcPtr, uchar *dstPtr, statusHandlerType statusHandler); -+ -+#endif -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/Que.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/Que.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/Que.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/Que.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,106 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * Que.h -+ * -+ * Description: -+ * Definition and implementation (via macros and inline functions) -+ * of a simple queue -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ *****************************************************************************/ -+ -+#ifndef QueHeader_H_ -+#define QueHeader_H_ -+ -+typedef void * _QueItem; -+ -+typedef struct _QueHeader -+ { -+ _QueItem *head; /* first item in the queue */ -+ _QueItem *tail; /* last item in the queue */ -+ } QueHeader; -+ -+/* Queue management macros */ -+ -+#define QueInit(pqHdr) (((QueHeader *)(pqHdr))->head = ((QueHeader *)(pqHdr))->tail = NULL) -+#define QueEmpty(pqHdr) (NULL == ((QueHeader *)(pqHdr))->head) -+ -+#define QueFirst(pqHdr) ((QueHeader *)(pqHdr))->head -+#define QueLast(pqHdr) ((QueHeader *)(pqHdr))->tail -+#define QueNext(pqItem) (*((void **)(pqItem))) -+ -+ -+#define QueRemoveFirst(pqHdr) do { \ -+ if (!QueEmpty(pqHdr)) { \ -+ ((QueHeader *)(pqHdr))->head = *((QueHeader *)(pqHdr))->head; \ -+ if (QueEmpty(pqHdr)) \ -+ ((QueHeader *)(pqHdr))->tail = NULL; \ -+ } \ -+} while (0) -+#define QueRemove(pqHdr) QueRemoveFirst(pqHdr) -+ -+ -+#define QueAddLast(pqHdr,pqItem) do { \ -+ QueNext(pqItem) = NULL; \ -+ if (NULL != ((QueHeader *)(pqHdr))->tail) \ -+ *((QueHeader *)(pqHdr))->tail = (pqItem); \ -+ else \ -+ ((QueHeader *)(pqHdr))->head = (_QueItem *)(pqItem); \ -+ ((QueHeader *)(pqHdr))->tail = (_QueItem *)(pqItem); \ -+} while (0) -+#define QueAdd(pqHdr,pItem) QueAddLast(pqHdr,pItem) -+ -+#define QueAddFirst(pqHdr,pqItem) do { \ -+ if (NULL == ((QueHeader *)(pqHdr))->tail) \ -+ ((QueHeader *)(pqHdr))->tail = (_QueItem *)(pqItem); \ -+ QueNext(pqItem) = ((QueHeader *)(pqHdr))->head; \ -+ ((QueHeader *)(pqHdr))->head = (_QueItem *)(pqItem); \ -+} while (0) -+ -+ -+#define QueGet(pqHdr) \ -+ (void *) QueFirst(pqHdr); \ -+ QueRemove(pqHdr); -+ -+#define QueMerge(pqHdr1,pqHdr2) do { \ -+ if (NULL == ((QueHeader *)(pqHdr1))->tail) \ -+ ((QueHeader *)(pqHdr1))->head = ((QueHeader *)(pqHdr2))->head; \ -+ else \ -+ QueNext(((QueHeader *)(pqHdr1))->tail) = ((QueHeader *)(pqHdr2))->head; \ -+ if (NULL != ((QueHeader *)(pqHdr2))->tail) \ -+ ((QueHeader *)(pqHdr1))->tail = ((QueHeader *)(pqHdr2))->tail; \ -+} while (0) -+ -+#define QueCopy(pqHdr1,pqHdr2) do { \ -+ ((QueHeader *)(pqHdr1))->head = ((QueHeader *)(pqHdr2))->head; \ -+ ((QueHeader *)(pqHdr1))->tail = ((QueHeader *)(pqHdr2))->tail; \ -+} while (0) -+ -+#define QueForEach(pqHdr,f,ref) do { \ -+ _QueItem *p = ((QueHeader *)(pqHdr))->head; \ -+ \ -+ while (NULL != p) { \ -+ if ( (f)((void *)p, ref) ) break; \ -+ p = QueNext(p); \ -+ } \ -+} while (0) -+ -+#endif /* QueHeader_H_ */ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftAtmVc.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftAtmVc.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftAtmVc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftAtmVc.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,569 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * SoftAtmVc.h -+ * -+ * Description: -+ * This file contains ATM VC definitions -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.27 $ -+ * -+ * $Id: SoftAtmVc.h,v 1.27 2004/06/02 22:26:17 ilyas Exp $ -+ * -+ * $Log: SoftAtmVc.h,v $ -+ * Revision 1.27 2004/06/02 22:26:17 ilyas -+ * Added ATM counters for G.992.3 -+ * -+ * Revision 1.26 2004/03/10 22:57:20 ilyas -+ * Added I.432 scramling control -+ * -+ * Revision 1.25 2003/09/23 00:21:59 ilyas -+ * Added status to indicate ATM header compression -+ * -+ * Revision 1.24 2003/08/27 02:00:50 ilyas -+ * Original implementation of ATM header compression -+ * -+ * Revision 1.23 2003/02/25 04:13:15 ilyas -+ * Added standard Broadcom header -+ * -+ * Revision 1.22 2003/01/10 23:25:48 ilyas -+ * Added ATM status definition -+ * -+ * Revision 1.21 2002/09/12 21:07:19 ilyas -+ * Added HEC, OCD and LCD counters -+ * -+ * Revision 1.20 2002/04/02 09:58:00 ilyas -+ * Initial implementatoin of BERT -+ * -+ * Revision 1.19 2001/10/09 22:35:14 ilyas -+ * Added more ATM statistics and OAM support -+ * -+ * Revision 1.18 2001/06/18 19:49:36 ilyas -+ * Changes to include support for HOST_ONLY mode -+ * -+ * Revision 1.17 2001/02/23 05:49:57 ilyas -+ * Added routed 1483 encapsulation -+ * -+ * Revision 1.16 2001/02/09 04:18:18 ilyas -+ * Added framer for bridged ethernet PDUs -+ * -+ * Revision 1.15 2001/02/09 01:55:27 ilyas -+ * Added status codes and macros to support printing of AAL packets -+ * -+ * Revision 1.14 2000/09/21 17:28:35 ilyas -+ * Added VBR support to traffic management code, separated UBR to a different -+ * Tx list, changed some of the algorithms -+ * -+ * Revision 1.13 2000/08/23 18:42:13 ilyas -+ * Added AAL2, added VcConfigure functions, moved commonly used look-up -+ * tables for CRC calculation to AtmLayer -+ * -+ * Revision 1.12 2000/08/02 03:06:22 ilyas -+ * Added support for reserving space in RX packets for ATm protocols -+ * -+ * Revision 1.11 2000/07/28 17:23:39 ilyas -+ * Added ATM connect/disconnect statuses -+ * -+ * Revision 1.10 2000/07/25 02:16:12 ilyas -+ * Added EClip (with Eth to ATM ARP translation) implementation -+ * -+ * Revision 1.9 2000/07/23 20:57:14 ilyas -+ * Added ATM framer and protocol layers -+ * -+ * Revision 1.8 2000/07/17 21:08:16 lkaplan -+ * removed global pointer -+ * -+ * Revision 1.7 2000/06/09 18:33:04 liang -+ * Fixed Irix compiler warnings. -+ * -+ * Revision 1.6 2000/05/18 21:47:31 ilyas -+ * Added detection of preassigned cells such as OAM F4, F5 -+ * -+ * Revision 1.5 2000/05/14 01:50:11 ilyas -+ * Added more statuses to ATM code -+ * -+ * Revision 1.4 2000/05/10 02:41:28 liang -+ * Added status report for no cell memory -+ * -+ * Revision 1.3 2000/05/09 23:00:27 ilyas -+ * Added ATM status messages, ATM timer, Tx frames flush on timeout -+ * Fixed a bug - adding flushed Tx frames to the list of free Rx frames -+ * -+ * Revision 1.2 2000/05/03 03:53:00 ilyas -+ * Added support for pVc to vcID translation needed for LOG file and other -+ * definitions for ATM data in LOG file -+ * -+ * Revision 1.1 2000/04/19 00:21:35 ilyas -+ * Fixed some problems and added Out Of Band (OOB) support to ATM packets -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef SoftAtmVcHeader -+#define SoftAtmVcHeader -+ -+/* -+** -+** ATM UNI types -+** -+*/ -+ -+#define AtmLinkFlags(bMap,name) (((bMap) >> name##Shift) & name##Mask) -+ -+/* ATM service category types */ -+ -+#define kAtmSrvcCBR 1 /* Constant Bit Rate */ -+#define kAtmSrvcVBR 2 /* Variable Bit Rate */ -+#define kAtmSrvcUBR 4 /* Unspecified Bit Rate */ -+#define kAtmSrvcABR 8 /* Available Bit Rate */ -+#define kAtmSrvcUnknown 0xFF -+ -+/* ATM AAL types (as encoded at UNI) */ -+ -+#define kAtmAalIE 0x58 -+ -+#define kAtmRaw 0 -+#define kAtmAal1 1 -+#define kAtmAal2 2 -+#define kAtmAal34 3 -+#define kAtmAal5 5 -+#define kAtmAalUser 16 -+#define kAtmAalUnknown 0xFF -+ -+/* ATM AAL1 parameters */ -+ -+#define kAal1SubTypeId 0x85 -+ -+#define kAal1TransportShift 0 -+#define kAal1TransportMask 0x7 -+ -+#define kAal1NullTransport 0 -+#define kAal1VoiceTransport 1 -+#define kAal1CircuitTransport 2 -+#define kAal1AudioTransport 4 -+#define kAal1VideoTransport 5 -+ -+ -+#define kAal1CBRId 0x86 -+ -+#define kAal1CBRShift 24 -+#define kAal1CBRMask 0xFF -+ -+#define kAal1CBR64 1 -+#define kAal1CBR1544 4 /* DS1 */ -+#define kAal1CBR6312 5 /* DS2 */ -+#define kAal1CBR32064 6 -+#define kAal1CBR44736 7 /* DS3 */ -+#define kAal1CBR97728 8 -+#define kAal1CBR2048 0x10 /* E1 */ -+#define kAal1CBR8448 0x11 /* E2 */ -+#define kAal1CBR34368 0x12 /* E3 */ -+#define kAal1CBR139264 0x13 -+#define kAal1CBR64xN 0x40 -+#define kAal1CBR8xN 0x41 -+ -+ -+#define kAal1MultiplierId 0x87 -+ -+#define kAal1ClockRecoveryId 0x88 -+ -+#define kAal1ClockRecoveryShift 3 -+#define kAal1ClockRecoveryMask 0x3 -+ -+#define kAal1ClockRecoveryNull 1 /* synchronous transport */ -+#define kAal1ClockRecoverySRTS 1 /* asynchronous transport */ -+#define kAal1ClockRecoveryAdaptive 2 -+ -+ -+#define kAal1ECMId 0x89 /* Error correction method */ -+ -+#define kAal1ECMShift (kAal1ClockRecoveryShift + 2) -+#define kAal1ECMMask 0x3 -+ -+#define kAal1ECMNull 0 -+#define kAal1ECMLossSensitive 1 -+#define kAal1ECMDelaySensitive 2 -+ -+ -+#define kAal1SDTBlockSizeId 0x8A -+ -+#define kAal1CellFillId 0x8B -+ -+/* ATM AAL34 and AAL5 parameters */ -+ -+#define kAalFwdMaxSDUSizeId 0x8C -+#define kAalBacMaxkSDUSizeId 0x81 -+ -+#define kAal34MidRangeId 0x82 -+ -+#define kAalSSCSTypeId 0x84 -+ -+#define kAalSSCSAssured 1 -+#define kAalSSCSNonAssured 2 -+#define kAalSSCSFrameRelay 4 -+ -+/* ATM AAL2 parameters */ -+ -+#define kAal2SSNone 0 -+#define kAal2SSSAR 1 -+#define kAal2SSTED 2 -+#define kAal2SSSARMask 3 -+#define kAal2SSType1 4 -+#define kAal2SSType3 5 -+ -+typedef struct { -+ uchar aalType; -+ union { -+ struct { -+ bitMap aal1Flags; -+ ulong cbrRate; -+ ushort blkSize; -+ uchar sarUsed; -+ } aal1Params; -+ struct { -+ ushort fwdMaxCpSize; /* Max "common part" packet size */ -+ ushort backMaxCpSize; -+ ushort cidLow; -+ ushort cidHigh; -+ ushort fwdMaxSsSize; /* Max "service specific" packet size */ -+ ushort backMaxSsSize; -+ uchar sscsType; -+ } aal2Params; -+ struct { -+ ushort fwdMaxSDUSize; -+ ushort backMaxSDUSize; -+ ushort midLow; -+ ushort midHigh; -+ uchar sscsType; -+ } aal34Params; -+ struct { -+ ushort fwdMaxSDUSize; -+ ushort backMaxSDUSize; -+ uchar sscsType; -+ } aal5Params; -+ } param; -+} atmAalParams; -+ -+/* ATM Traffic Descriptor types (as encoded at UNI) */ -+ -+#define kAtmTrafficIE 0x59 -+ -+#define kTrafficFwdPeakCellRateId0 0x82 -+#define kTrafficBackPeakCellRateId0 0x83 -+#define kTrafficFwdPeakCellRateId 0x84 -+#define kTrafficBackPeakCellRateId 0x85 -+ -+#define kTrafficFwdSustainCellRateId0 0x88 -+#define kTrafficBackSustainCellRateId0 0x89 -+#define kTrafficFwdSustainCellRateId 0x90 -+#define kTrafficBackSustainCellRateId 0x91 -+ -+#define kTrafficFwdMaxBurstSizeId0 0xA0 -+#define kTrafficBackMaxBurstSizeId0 0xA1 -+#define kTrafficFwdMaxBurstSizeId 0xB0 -+#define kTrafficBackMaxBurstSizeId 0xB1 -+ -+#define kTrafficBestEffortId 0xBE -+#define kTrafficMgrOptionsId 0xBF -+ -+#define kTrafficMaxTolerance 0x7FFFFFFF -+ -+/* trafficFlags coding */ -+ -+#define kTrafficTagFwd 1 -+#define kTrafficTagBack 2 -+#define kTrafficBestEffort 4 -+ -+typedef struct { -+ ulong tPCR0; /* CLP = 0, time between cells in us */ -+ ulong tPCR; /* CLP = 0+1 */ -+ ulong tolPCR; /* tolerance for PCR in us */ -+ -+ ulong tSCR0; /* CLP = 0 */ -+ ulong tSCR; /* CLP = 0+1 */ -+ ulong tolSCR; /* tolerance for SCR in us */ -+ -+ uchar atmServiceType; /* CBR, VBR, UBR, etc. */ -+ uchar trafficFlags; -+} atmTrafficParams; -+ -+/* ATM Broadband Bearer Capabilty (BBC) types (as encoded at UNI) */ -+ -+#define kAtmBBCIE 0x5E -+ -+#define kBBCClassShift 0 -+#define kBBCClassMask 0x1F -+ -+#define kBBCClassA 0x1 -+#define kBBCClassC 0x3 -+#define kBBCClassX 0x10 -+ -+ -+#define kBBCTrafficShift (kBBCClassShift + 5) -+#define kBBCTrafficMask 0x7 -+ -+#define kBBCTrafficNull 0 -+#define kBBCTrafficCBR 1 -+#define kBBCTrafficVBR 2 -+ -+ -+#define kBBCTimingShift (kBBCTrafficShift + 3) -+#define kBBCTimingMask 0x3 -+ -+#define kBBCTimingNull 0 -+#define kBBCTimingRequired 1 -+#define kBBCTimingNotRequired 2 -+ -+ -+#define kBBCClippingShift (kBBCTimingShift + 2) -+#define kBBCClippingMask 0x3 -+ -+#define kBBCNoClipping 0 -+#define kBBCClippingOk 1 -+ -+#define kBBCConnectionShift (kBBCClippingShift + 2) -+#define kBBCConnectionMask 0x3 -+ -+#define kBBCPoint2Point 0 -+#define kBBCPoint2MPoint 1 -+ -+/* ATM Broadband High/Low Layer Information (BHLI/BLLI) types (as encoded at UNI) */ -+ -+#define kAtmBHLIIE 0x5D -+#define kAtmBLLIIE 0x5F -+ -+/* ATM QoS types (as encoded at UNI) */ -+ -+#define kAtmQoSIE 0x5C -+ -+#define kQoSNull 0 -+#define kQoSClass1 1 -+#define kQoSClass2 2 -+#define kQoSClass3 3 -+#define kQoSClass4 4 -+#define kQoSReserved 0xFF -+ -+typedef struct { -+ uchar fwdQoSClass; -+ uchar backQoSClass; -+} atmQoSParams; -+ -+/* ATM MID definitions (ConfigureHandler) */ -+ -+#define kAtmMidEntireVc ((ulong) -1) -+ -+typedef struct { -+ void *pUserVc; /* VC id from the caller: has to be 1st !!! */ -+ ulong vci; -+ uchar defaultCLP; /* default CLP for tx packets on this VC */ -+ uchar framerId; -+ uchar protoId; -+ uchar protoRxBytesReserved; /* # bytes reserved by protocol in the beginning of Rx packet */ -+ uchar protoTxBytesReserved; /* # bytes reserved by protocol in the beginning of Tx packet */ -+ -+ atmAalParams aalParams; -+ atmTrafficParams rxTrafficParams; -+ atmTrafficParams txTrafficParams; -+ bitMap bbcFlags; -+ atmQoSParams qosParams; -+} atmVcParams; -+ -+/* -+** -+** ATM Out of Band (OOB) packet information -+** -+*/ -+ -+typedef struct { -+ Boolean clp; /* Cell Loss Prioroty */ -+ uchar aalType; -+ union { -+ struct { -+ uchar payloadType; -+ } aalRawParams; -+ struct { -+ uchar payloadType; -+ ushort mid; -+ } aal34Params; -+ struct { -+ uchar uui; /* Uses to user indicator */ -+ uchar cpi; /* common part indicator */ -+ } aal5Params; -+ } aalParam; -+} atmOobPacketInfo; -+ -+/* -+** -+** ATM setup bit definition -+** -+*/ -+ -+#define kAtmCorrectHecErrors 1 -+#define kCorrectHecErrors kAtmCorrectHecErrors -+#define kAtmPhyHeaderCompression 2 -+#define kAtmPhyNoDataScrambling 4 -+ -+#define kAtmTxIdleTimeoutMask 0x6 -+#define kAtmTxIdleNoTimeout 0 -+#define kAtmTxIdleTimeout10s 2 -+#define kAtmTxIdleTimeout30s 4 -+#define kAtmTxIdleTimeout60s 6 -+ -+/* -+** -+** ATM framer modes and protocol definitions -+** -+*/ -+ -+#define kAtmFramerNone 0 -+#define kAtmFramerISO 1 -+#define kAtmFramerIP 2 -+#define kAtmFramerEth 3 -+#define kAtmFramerEthWithCRC 4 -+ -+#define kAtmProtoNone 0 -+#define kAtmProtoEClip 1 -+#define kAtmProtoERouted1483 2 -+#define kAtmProtoPPP 3 -+ -+ -+/* -+** -+** ATM status codes -+** -+*/ -+ -+typedef void (*atmStatusHandler) (void *gDslVars, ulong statusCode, ...); -+ -+/* physical layer I.432 */ -+ -+#define kAtmStatRxHunt 1 -+#define kAtmStatRxPreSync 2 -+#define kAtmStatRxSync 3 -+#define kAtmStatRxPlOamCell 4 -+#define kAtmStatBertResult 5 -+#define kAtmStatHec 6 -+#define kAtmStatHdrCompr 7 -+#define kAtmStatCounters 8 -+ -+/* ATM layer */ -+ -+#define kAtmLayerStatFirst 100 -+#define kAtmStatRxDiscarded 100 -+#define kAtmStatTxDelayed 101 -+ -+#define kAtmStatVcCreated 102 -+#define kAtmStatVcStarted 103 -+#define kAtmStatVcStopped 104 -+#define kAtmStatVcDeleted 105 -+ -+#define kAtmStatTimeout 106 -+#define kAtmStatNoCellMemory 107 -+#define kAtmStatPrintCell 108 -+#define kAtmStatInvalidCell 109 -+#define kAtmStatUnassignedCell 110 -+#define kAtmStatOamF4SegmentCell 111 -+#define kAtmStatOamF4End2EndCell 112 -+#define kAtmStatOamI371Cell 113 -+#define kAtmStatOamF5SegmentCell 114 -+#define kAtmStatOamF5End2EndCell 115 -+#define kAtmStatReservedCell 116 -+ -+#define kAtmStatConnected 117 -+#define kAtmStatDisconnected 118 -+ -+#define kAtmStatRxPacket 119 -+#define kAtmStatTxPacket 120 -+ -+#define kAtmStatOamLoopback 121 -+ -+ -+typedef struct _atmPhyCounters { -+ ushort id; -+ ushort bertStatus; -+ ulong bertCellTotal; -+ ulong bertCellCnt; -+ ulong bertBitErrors; -+ -+ ulong rxHecCnt; -+ ulong rxCellTotal; -+ ulong rxCellData; -+ ulong rxCellDrop; -+} atmPhyCounters; -+ -+/* AAL layer */ -+ -+ -+ -+/* -+** -+** ATM log file definitions -+** -+*/ -+ -+/* ATM log file flags */ -+ -+#define kAtmLogFrameFlagMask 3 /* mask */ -+ -+#define kAtmLogFrameFlagNone 0 /* nothing */ -+#define kAtmLogFrameFlagNoData 1 /* no data only frame size */ -+#define kAtmLogFrameFlagBinData 2 /* data in binary form */ -+#define kAtmLogFrameFlagTextData 3 /* data in text form */ -+ -+#define kAtmLogSendFrameShift 0 -+#define kAtmLogSendFrameNoData (kAtmLogFrameFlagNoData << kAtmLogSendFrameShift) -+#define kAtmLogSendFrameBinData (kAtmLogFrameFlagBinData << kAtmLogSendFrameShift) -+#define kAtmLogSendFrameTextData (kAtmLogFrameFlagTextData << kAtmLogSendFrameShift) -+ -+#define kAtmLogRcvFrameShift 2 -+#define kAtmLogRcvFrameNone (kAtmLogFrameFlagNone << kAtmLogRcvFrameShift) -+#define kAtmLogRcvFrameNoData (kAtmLogFrameFlagNoData << kAtmLogRcvFrameShift) -+#define kAtmLogRcvFrameBinData (kAtmLogFrameFlagBinData << kAtmLogRcvFrameShift) -+#define kAtmLogRcvFrameTextData (kAtmLogFrameFlagTextData << kAtmLogRcvFrameShift) -+ -+#define kAtmLogSendCompleteFrameShift 4 -+#define kAtmLogSendCompleteFrameNone (kAtmLogFrameFlagNone << kAtmLogSendCompleteFrameShift) -+#define kAtmLogSendCompleteFrameNoData (kAtmLogFrameFlagNoData << kAtmLogSendCompleteFrameShift) -+ -+#define kAtmLogReturnFrameShift 6 -+#define kAtmLogReturnFrameNoData (kAtmLogFrameFlagNoData << kAtmLogReturnFrameShift) -+ -+#define kAtmLogCellFlag (1 << 8) -+ -+/* ATM log codes */ -+ -+#define kAtmLogSendFrame 1 -+#define kAtmLogRcvFrame 2 -+#define kAtmLogSendFrameComplete 3 -+#define kAtmLogReturnFrame 4 -+#define kAtmLogVcAllocate 5 -+#define kAtmLogVcFree 6 -+#define kAtmLogVcActivate 7 -+#define kAtmLogVcDeactivate 8 -+#define kAtmLogTimer 9 -+#define kAtmLogCell 10 -+#define kAtmLogVcConfigure 11 -+ -+#define kAtmLogRxCellHeader 12 -+#define kAtmLogRxCellData 13 -+#define kAtmLogTxCell 14 -+ -+#endif /* SoftAtmVcHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftDsl.gh linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftDsl.gh ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftDsl.gh 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftDsl.gh 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,675 @@ -+/**************************************************************************** -+ * -+ * SoftDsl.gh -+ * -+ * Description: -+ * This is a header file which defines the type for the DSL -+ * global variable structure. -+ * -+ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.72 $ -+ * -+ * $Id: SoftDsl.gh,v 1.72 2004/04/30 23:05:19 kdu Exp $ -+ * -+ * $Log: SoftDsl.gh,v $ -+ * Revision 1.72 2004/04/30 23:05:19 kdu -+ * Fixed interop issues in TDC lab for TMM. -+ * -+ * Revision 1.70 2004/04/10 23:30:48 ilyas -+ * Defined gloval structure for slow (SDRAM) data -+ * -+ * Revision 1.69 2004/04/02 18:33:45 gsyu -+ * Share MuxFramer buffers with scratch memory -+ * -+ * Revision 1.68 2004/02/04 20:12:38 linyin -+ * Support adsl2plus -+ * -+ * Revision 1.67 2004/02/03 19:10:37 gsyu -+ * Added separated carrierInfo structures for G992P5 -+ * -+ * Revision 1.66 2004/01/26 04:21:06 yongbing -+ * Merge changes in ADSL2 branch into Annex A branch -+ * -+ * Revision 1.65 2004/01/13 19:12:07 gsyu -+ * Added two more variables for Double upstream -+ * -+ * Revision 1.64 2003/12/04 02:10:37 linyin -+ * Add a variable for FbmsOL mode -+ * -+ * Revision 1.63 2003/11/20 00:57:50 yongbing -+ * Merge ADSL2 functionalities into Annex A branch -+ * -+ * Revision 1.62 2003/11/05 01:59:12 liang -+ * Add vendor ID code for Infineon. -+ * -+ * Revision 1.61 2003/08/12 22:59:41 khp -+ * - for Haixiang: added support for ADSL_MARGIN_TWEAK_TEST -+ * -+ * Revision 1.60 2003/08/01 00:08:19 liang -+ * Added firmware ID for Samsung ADI 930 DSLAM. -+ * -+ * Revision 1.59 2003/07/14 14:40:08 khp -+ * - AnnexB: added bad SNR2 retrain counter to connectin setup -+ * -+ * Revision 1.58 2003/06/25 02:40:22 liang -+ * Added firmware ID for Annex A UE9000 ADI918 (from Aliant, Canada). -+ * -+ * Revision 1.57 2003/06/25 00:00:40 ilyas -+ * -added firmware IDs for TI 4000C and AC5 (Annex B) -+ * -+ * Revision 1.56 2003/05/31 01:50:38 khp -+ * -add firmware IDs for ECI16 and ECI16A -+ * -+ * Revision 1.55 2003/03/27 19:30:52 liang -+ * Add and initialize new connectionSetup field coVendorFirmwareID under module ADSL_IDENTIFY_VENDOR_FIRMWARE. -+ * -+ * Revision 1.54 2002/12/13 18:35:48 yongbing -+ * Add support for G.992.2 Annex C in start up -+ * -+ * Revision 1.53 2002/12/06 02:06:33 liang -+ * Moved the T1.413 RAck1/RAck2 switching variables to connection setup structure. -+ * -+ * Revision 1.52 2002/11/26 02:49:46 liang -+ * Added variable codingGainDecrement to the connectionSetup structure to solve the C-Rates-RA option failure problem. -+ * -+ * Revision 1.51 2002/10/20 18:56:16 khp -+ * - for linyin: -+ * - #ifdef NEC_NSIF_WORKAROUND: -+ * - add status and fail counter for NSIF -+ * -+ * Revision 1.50 2002/09/28 02:36:50 yongbing -+ * Add retrain in T1.413 with R-Ack1 tone -+ * -+ * Revision 1.49 2002/09/12 21:07:19 ilyas -+ * Added HEC, OCD and LCD counters -+ * -+ * Revision 1.48 2002/07/19 01:51:35 liang -+ * Added vendor ID constant for Alcatel. -+ * -+ * Revision 1.47 2002/06/27 21:51:08 liang -+ * Added xmt and rcv tone selection bitmap in connection setup. -+ * -+ * Revision 1.46 2002/06/11 20:48:06 liang -+ * Added CO vendor ID field to connectionSetup structure. -+ * -+ * Revision 1.45 2002/06/06 03:05:43 khp -+ * -use boolean in connectup setup instead of localCapabilities.features to indicate FBM mode -+ * -+ * Revision 1.44 2002/03/22 19:38:58 yongbing -+ * Modify for co-exist of G994P1 and T1P413 -+ * -+ * Revision 1.43 2002/03/02 00:52:40 ilyas -+ * AnnexC delay needs to be long for prototype -+ * -+ * Revision 1.42 2002/01/19 23:59:17 ilyas -+ * Added support for LOG and eye data to ADSL core target -+ * -+ * Revision 1.41 2002/01/16 19:03:59 ilyas -+ * Added HOST_ONLY ifdefs around ADSL core data -+ * -+ * Revision 1.40 2002/01/14 17:41:04 liang -+ * Move xmt & rcv sample buffers to top level. -+ * -+ * Revision 1.39 2001/12/21 22:45:34 ilyas -+ * Added support for ADSL MIB data object -+ * -+ * Revision 1.38 2001/12/13 02:24:22 ilyas -+ * Added G997 (Clear EOC and G997 framer) support -+ * -+ * Revision 1.37 2001/11/30 05:56:31 liang -+ * Merged top of the branch AnnexBDevelopment onto top of the tree. -+ * -+ * Revision 1.36 2001/10/19 00:12:07 ilyas -+ * Added support for frame oriented (no ATM) data link layer -+ * -+ * Revision 1.29.2.5 2001/10/03 01:44:00 liang -+ * Merged with codes from main tree (tag SoftDsl_2_18). -+ * -+ * Revision 1.29.2.4 2001/08/18 00:00:36 georgep -+ * Add variable to store annexC pathDelay -+ * -+ * Revision 1.29.2.3 2001/08/08 17:33:27 yongbing -+ * Merge with tag SoftDsl_2_17 -+ * -+ * Revision 1.35 2001/08/29 02:56:01 ilyas -+ * Added tests for flattening/unflatenning command and statuses (dual mode) -+ * -+ * Revision 1.34 2001/08/28 03:26:32 ilyas -+ * Added support for running host and adsl core parts separately ("dual" mode) -+ * -+ * Revision 1.33 2001/06/18 19:49:36 ilyas -+ * Changes to include support for HOST_ONLY mode -+ * -+ * Revision 1.32 2001/05/18 21:21:44 liang -+ * Save the current number of rcv samples to line handler for QProc test. -+ * -+ * Revision 1.31 2001/04/25 01:20:11 ilyas -+ * -+ * Don't use DSL frame functions if ATM_LAYER is not defined -+ * -+ * Revision 1.30 2001/03/25 06:11:20 liang -+ * Combined separate loop attenuation status for ATUR & ATUC into one status. -+ * Replace separate hardware AGC info status for ATUR & ATUC into hardware AGC -+ * request status and hardware AGC obtained status. -+ * Use store AGC command to save hardware AGC value instead of returning value -+ * from status report. -+ * -+ * Revision 1.29 2001/03/17 03:00:46 georgep -+ * Added agcInfo to connectionSetupStruct -+ * -+ * Revision 1.28 2001/02/10 03:03:09 ilyas -+ * Added one more DslFrame function -+ * -+ * Revision 1.27 2000/08/31 19:04:24 liang -+ * Added scratch buffer structure definition. -+ * -+ * Revision 1.26 2000/07/23 20:52:52 ilyas -+ * Added xxxFrameBufSetAddress() function for ATM framer layers -+ * Rearranged linkLayer functions in one structure which is passed as a -+ * parameter to xxxLinkLayerInit() function to be set there -+ * -+ * Revision 1.25 2000/07/18 21:42:25 ilyas -+ * Fixed compiler warning about pointer casting -+ * -+ * Revision 1.24 2000/07/18 21:18:45 ilyas -+ * Added GLOBAL_PTR_BIAS feature to utilize full 64K MIPS relative addressing space -+ * -+ * Revision 1.23 2000/07/18 20:03:24 ilyas -+ * Changed DslFrame functions definitions to macros, -+ * Removed gDslVars from their parameter list -+ * -+ * Revision 1.22 2000/07/17 21:08:15 lkaplan -+ * removed global pointer -+ * -+ * Revision 1.21 2000/05/09 23:00:26 ilyas -+ * Added ATM status messages, ATM timer, Tx frames flush on timeout -+ * Fixed a bug - adding flushed Tx frames to the list of free Rx frames -+ * -+ * Revision 1.20 2000/05/03 03:57:04 ilyas -+ * Added LOG file support for writing ATM data -+ * -+ * Revision 1.19 2000/04/19 00:31:47 ilyas -+ * Added global SoftDsl functions for Vc, added OOB info functions -+ * -+ * Revision 1.18 2000/04/13 08:36:22 yura -+ * Added SoftDslSetRefData, SoftDslGetRefData functions -+ * -+ * Revision 1.17 2000/04/13 05:38:54 georgep -+ * Added T1p413 "Activation and Acknowledgement" which can substitute G994P1 -+ * -+ * Revision 1.16 2000/04/05 22:30:42 liang -+ * Changed function & constant names from G992p2 to G992 for the Main module. -+ * -+ * Revision 1.15 2000/04/04 04:16:06 liang -+ * Merged with SoftDsl_0_03 from old tree. -+ * -+ * Revision 1.15 2000/04/04 01:47:21 ilyas -+ * Implemented abstract dslFrame and dslFrameBuffer objects -+ * -+ * Revision 1.14 2000/04/01 02:53:33 georgep -+ * Added pointer to G992p2Profile inside connectionSetup -+ * -+ * Revision 1.13 2000/03/18 01:27:56 georgep -+ * Changed connectionSetup to include G992p1 Capabilities -+ * -+ * Revision 1.12 2000/02/29 01:39:05 georgep -+ * put variable haveRemoteCapabilities inside connectionSetupStruct -+ * -+ * Revision 1.11 2000/02/08 00:44:36 liang -+ * Fix the gDslVars definition for Irix environment. -+ * -+ * Revision 1.10 1999/11/19 00:59:29 george -+ * Define physicalLayerVars as a union -+ * -+ * Revision 1.9 1999/11/11 19:19:42 george -+ * Porting to 16Bit Compiler -+ * -+ * Revision 1.8 1999/11/09 20:26:17 george -+ * Added G992P2_PROFILE to modules list -+ * -+ * Revision 1.7 1999/10/27 23:01:54 wan -+ * Add G.994.1 setup in dslConnectionSetupStruct for setting up Initiation side -+ * -+ * Revision 1.6 1999/08/12 21:16:27 george -+ * Move profileVars definition to G992p2/G992p2Profile.gh -+ * -+ * Revision 1.5 1999/08/10 18:20:43 george -+ * Define fastRetrainVars -+ * -+ * Revision 1.4 1999/07/16 02:03:02 liang -+ * Added Tx & Rx data handler function pointers. -+ * -+ * Revision 1.3 1999/07/03 01:40:15 liang -+ * Redefined dsl command parameter list and added connection setup struct. -+ * -+ * Revision 1.2 1999/02/10 01:56:37 liang -+ * Added hooks for G994.1 and G992.2. -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef SoftDslGlobals -+#define SoftDslGlobals -+ -+#include "SoftDsl.h" -+ -+#ifdef G992P2_PROFILE -+#include "G992p2Profile.gh" -+#endif -+ -+typedef enum -+ { -+ kVendorUnknown = 0, -+ kVendorBroadcom, -+ kVendorGlobespan, -+ kVendorADI, -+ kVendorTI, -+ kVendorCentillium, -+ kVendorAlcatel, -+ kVendorInfineon -+ } VendorIDType; -+ -+#define kDslVendorFirwareUnknown 0 -+typedef enum -+ { -+ kVendorADI_Anaconda = 1, -+ kVendorADI_ECI918, -+ kVendorADI_ECI930, -+ kVendorADI_Cisco, -+ kVendorADI_UE9000_918, -+ kVendorADI_Samsung_930, -+ kVendorTI_4000C_ERICSSON_350, -+ kVendorTI_4000C_SEIMENS, -+ kVendorADI_ECI16_AnnexB = 50, /* leave space for more Annex A types */ -+ kVendorADI_ECI16A_AnnexB, -+ kVendorTI_4000C_AnnexB, -+ kVendorTI_AC5_AnnexB -+ } VendorFirmwareIDType; -+ -+#define kDslXmtToneSelectionStartTone 0 -+#ifdef G992P1_ANNEX_B -+#define kDslXmtToneSelectionEndTone 63 -+#else -+#define kDslXmtToneSelectionEndTone 31 -+#endif -+#define kDslXmtToneSelectionNumOfTones (kDslXmtToneSelectionEndTone-kDslXmtToneSelectionStartTone+1) -+#define kDslXmtToneSelectionNumOfBytes ((kDslXmtToneSelectionNumOfTones+7)/8) -+#define kDslRcvToneSelectionStartTone 32 -+#define kDslRcvToneSelectionEndTone 255 -+#define kDslRcvToneSelectionNumOfTones (kDslRcvToneSelectionEndTone-kDslRcvToneSelectionStartTone+1) -+#define kDslRcvToneSelectionNumOfBytes ((kDslRcvToneSelectionNumOfTones+7)/8) -+ -+#define kDslT1p413RAckModeTryRAck1 0x01 -+#define kDslT1p413RAckModeTryRAck2 0x02 -+#define kDslT1p413RAckModeTrialMask 0x0F -+#define kDslT1p413RAckModeSelected 0x10 -+#define kDslT1p413RAckModeTrialCount 10 /* when in trial mode */ -+#define kDslT1p413RAckModeSwitchCount 20 /* when mode is selected */ -+ -+#ifdef ADSL_MARGIN_TWEAK_TEST -+#define kDslMarginTweakNumOfTones 256 -+#endif -+ -+typedef struct -+ { -+ Boolean haveRemoteCapabilities; -+ dslModulationType selectedModulation; -+ dslModulationType startupModulation; -+#if defined(G992P1_ANNEX_I) || defined(G992P5) -+ ushort downstreamMinCarr, downstreamMaxCarr; -+#else -+ uchar downstreamMinCarr, downstreamMaxCarr; -+#endif -+ uchar upstreamMinCarr, upstreamMaxCarr; -+#if defined(DOUBLE_UP_STREAM) -+ Boolean isDoubleUsEnabled; -+ short selectedPilotTone; -+#endif -+ dslDataPumpCapabilities localCapabilities, remoteCapabilities; -+#ifdef G992P3 -+ g992p3DataPumpCapabilities localCarrierInfoG992p3AnnexA; -+ g992p3DataPumpCapabilities remoteCarrierInfoG992p3AnnexA; -+ g992p3DataPumpCapabilities selectedCarrierInfoG992p3AnnexA; -+ uchar xmtG992p3State; -+#ifdef G992P5 -+ g992p3DataPumpCapabilities localCarrierInfoG992p5AnnexA; -+ g992p3DataPumpCapabilities remoteCarrierInfoG992p5AnnexA; -+ g992p3DataPumpCapabilities selectedCarrierInfoG992p5AnnexA; -+#endif /* G992P5 */ -+#endif /* G992P3 */ -+ uchar handshakingDuplexMode; -+ Boolean handshakingClientInitiation; -+ short handshakingXmtPowerLevel; -+ uchar handshakingXmtCarrierSet; -+ short hwAgcQ4dB; /* for loop attenuation calculation */ -+ uchar coVendorID; -+#ifdef ADSL_IDENTIFY_VENDOR_FIRMWARE -+ uchar coVendorFirmwareID; -+#endif -+ uchar codingGainDecrement; /* coding gain decrement in Q4dB for initial rate calculation */ -+ uchar xmtToneSelection[kDslXmtToneSelectionNumOfBytes]; -+ uchar rcvToneSelection[kDslRcvToneSelectionNumOfBytes]; -+#ifdef G992_ANNEXC -+ Boolean isFbmMode; -+ Boolean isFbmsOLMode; -+ long xmtToRcvPathDelay; -+#endif -+#if defined(T1P413) && defined(XMT_RACT2_FOR_ADI_COMPATIBILITY) -+ uchar t1p413RAckModeUsed; -+ uchar t1p413RAckModeCounter; -+#endif -+#ifdef G992P1_ANNEX_B -+ uchar badSNR2RetrainCounter; -+#endif -+#ifdef ADSL_MARGIN_TWEAK_TEST -+ short marginTweakExtraPowerQ4dB; -+ char marginTweakTableQ4dB[kDslMarginTweakNumOfTones]; -+#endif -+#ifdef G992P2_PROFILE -+ G992p2ProfileVarsStruct* profileVarsPtr; -+#endif -+#ifdef TDC_IOP_FIX_SEIMENS_TI -+ char t1p413RetrainCounter; /* 0: no retrain needed; 1: force to T1.413 mode and retrain after R-MSG1; 2: 2nd T1.413 session, go to showtime */ -+#endif -+#ifdef ANSI_CACT12_PING_PONG -+ char t1p413SkipToneIndex; /* to alternate between CAct1 and CAct2 detection */ -+#endif -+ } dslConnectionSetupStruct; -+ -+#ifdef ADSL_FRAMER -+#include "MuxFramer.gh" -+#endif -+ -+#ifdef ATM -+#include "SoftAtm.gh" -+#endif -+ -+#ifdef DSL_PACKET -+#include "DslPacket.gh" -+#endif -+ -+#ifdef G997_1_FRAMER -+#include "G997.gh" -+#ifdef G992P3 -+#include "G992p3OvhMsg.gh" -+#endif -+#endif -+ -+#ifdef ADSL_MIB -+#include "AdslMib.gh" -+#endif -+ -+#ifndef HOST_ONLY -+#ifdef T1P413 -+#include "T1p413Main.gh" -+#endif -+ -+#ifdef G994P1 -+#include "G994p1Main.gh" -+#endif -+ -+#ifdef G992 -+#include "G992Main.gh" -+#endif -+ -+#include "SoftDslSampleBuffers.gh" -+#endif -+ -+typedef struct __dslSlowVarsStruct -+ { -+ int tmp; -+ } -+ dslSlowVarsStruct; -+ -+typedef struct __dslVarsStruct -+ { -+ bitMap setup; -+ eyeHandlerType eyeHandlerPtr; -+ logHandlerType logHandlerPtr; -+ dslDriverCallbackType driverCallback; -+ -+ rcvHandlerType rcvHandlerPtr; -+ xmtHandlerType xmtHandlerPtr; -+ -+#ifndef ADSLCORE_ONLY -+ dslCommandHandlerType adslCoreCommandHandlerPtr; -+#endif -+ dslCommandHandlerType dataPumpCommandHandlerPtr; -+ -+ dslStatusHandlerType internalStatusHandlerPtr; -+ dslStatusHandlerType externalStatusHandlerPtr; -+#ifndef ADSLCORE_ONLY -+ dslStatusHandlerType externalLinkLayerStatusHandlerPtr; -+#endif -+ -+ dslDirectionType direction; -+ dslConnectionSetupStruct connectionSetup; -+ -+#ifdef NEC_NSIF_WORKAROUND -+ uchar G994NsStatus; -+ uchar G994NsFailCounter; -+#endif -+ -+ dslFrameHandlerType rxIndicateHandlerPtr; -+ dslFrameHandlerType txCompleteHandlerPtr; -+ -+ linkLayerFunctions LinkLayerFunctions; -+ dslSlowVarsStruct *dslSlowVars; -+ -+#ifdef DSL_FRAME_FUNCTIONS -+ dslFrameFunctions DslFrameFunctions; -+#endif -+ ulong refData; -+ ulong execTime; -+ int currRcvNSamps; -+ -+#ifndef HOST_ONLY -+ DslSampleBuffersStruct sampleBuffersVars; -+ -+#ifdef G992P2_PROFILE -+ G992p2ProfileVarsStruct G992p2ProfileVars; -+#endif -+ -+#ifdef ADSL_FRAMER -+ muxFramerVarsStruct muxFramerVars; -+#endif -+#endif /* HOST_ONLY */ -+ -+#ifdef DSL_LINKLAYER -+ union -+ { -+#ifdef ATM -+ atmVarsStruct atmVars; -+#endif -+#ifdef DSL_PACKET -+ dslPacketVarsStruct dslPacketVars; -+#endif -+ } linkLayerVars; -+#endif -+ -+#ifdef G997_1_FRAMER -+ g997VarsStruct G997Vars; -+#ifdef G992P3 -+ g992p3OvhMsgVarsStruct G992p3OvhMsgVars; -+#endif -+#endif -+ -+#ifdef ADSL_MIB -+ adslMibVarsStruct adslMibVars; -+#endif -+ -+#ifndef HOST_ONLY -+ union -+ { -+#ifdef T1P413 -+ T1p413VarsStruct T1p413Vars; -+#endif -+#ifdef G994P1 -+ G994p1VarsStruct G994p1Vars; -+#endif -+#ifdef G992 -+ G992VarsStruct G992Vars; -+#endif -+ } physicalLayerVars; -+ union -+ { -+#ifdef G992 -+ G992ScratchVarsStruct G992ScratchVars; -+#endif -+#if defined(ADSL_FRAMER) && defined(SHARE_MUX_FRAMER_VARS) -+ muxFramerSharedVarsStruct muxFramerSharedVars; -+#endif -+ } scratchVars; -+#endif /* HOST_ONLY */ -+ -+ } -+ dslVarsStruct; -+ -+#ifndef GLOBAL_PTR_BIAS -+#define gDslGlobalVarPtr ((struct __dslVarsStruct *)gDslVars) -+#define gDslGlobalSlowVarPtr (gDslGlobalVarPtr->dslSlowVars) -+#else -+#define gDslGlobalVarPtr ((struct __dslVarsStruct *) (void*)((uchar*)(gDslVars) - GLOBAL_PTR_BIAS)) -+#define gDslGlobalSlowVarPtr ((struct __dslSlowVarsStruct *) (void*)((uchar*)(gDslGlobalVarPtr->dslSlowVars) - GLOBAL_PTR_BIAS)) -+#endif -+ -+#define gDslSampleBuffersVars (gDslGlobalVarPtr->sampleBuffersVars) -+ -+#define gDslMuxFramerVars (gDslGlobalVarPtr->muxFramerVars) -+#define gDslMuxFramerSharedVars (gDslGlobalVarPtr->scratchVars.muxFramerSharedVars) -+#define gDslLinkLayerVars (gDslGlobalVarPtr->linkLayerVars) -+#define gDslAtmVars (gDslGlobalVarPtr->linkLayerVars.atmVars) -+#define gDslPacketVars (gDslGlobalVarPtr->linkLayerVars.dslPacketVars) -+#define gG997Vars (gDslGlobalVarPtr->G997Vars) -+ -+#ifdef G992P3 -+#define gG992p3OvhMsgVars (gDslGlobalVarPtr->G992p3OvhMsgVars) -+#endif -+ -+#define gAdslMibVars (gDslGlobalVarPtr->adslMibVars) -+ -+#define gT1p413Vars (gDslGlobalVarPtr->physicalLayerVars.T1p413Vars) -+#define gG994p1Vars (gDslGlobalVarPtr->physicalLayerVars.G994p1Vars) -+#define gG992Vars (gDslGlobalVarPtr->physicalLayerVars.G992Vars) -+#define gG992p2ProfileVars (gDslGlobalVarPtr->G992p2ProfileVars) -+ -+#define gG992ScratchVars (gDslGlobalVarPtr->scratchVars.G992ScratchVars) -+ -+#ifndef gEyeHandlerPtr -+#define gEyeHandlerPtr (gDslGlobalVarPtr->eyeHandlerPtr) -+#endif -+ -+#ifndef gLogHandlerPtr -+#define gLogHandlerPtr (gDslGlobalVarPtr->logHandlerPtr) -+#endif -+ -+#ifdef VP_SIMULATOR -+#define gDriverCallback(x) (gDslGlobalVarPtr->driverCallback)(x) -+#else -+#define gDriverCallback(x) -+#endif -+ -+/* -+** -+** Frame functions callouts -+** -+*/ -+ -+#define gDslFrameFunc (gDslGlobalVarPtr->DslFrameFunctions) -+ -+#define DslFrameBufferGetLength(gDslVars, fb) \ -+ gDslFrameFunc.__DslFrameBufferGetLength(fb) -+ -+#define DslFrameBufferGetAddress(gDslVars, fb) \ -+ gDslFrameFunc.__DslFrameBufferGetAddress(fb) -+ -+#define DslFrameBufferSetLength(gDslVars, fb, l) \ -+ gDslFrameFunc.__DslFrameBufferSetLength(fb, l) -+ -+#define DslFrameBufferSetAddress(gDslVars, fb, p) \ -+ gDslFrameFunc.__DslFrameBufferSetAddress(fb, p) -+ -+#define DslFrameInit(gDslVars, f) \ -+ gDslFrameFunc.__DslFrameInit(f) -+ -+#define DslFrameGetLength(gDslVars, pFrame) \ -+ gDslFrameFunc.__DslFrameGetLength(pFrame) -+ -+#define DslFrameGetBufCnt(gDslVars, pFrame) \ -+ gDslFrameFunc.__DslFrameGetBufCnt(pFrame) -+ -+#define DslFrameGetFirstBuffer(gDslVars, pFrame) \ -+ gDslFrameFunc.__DslFrameGetFirstBuffer(pFrame) -+ -+#define DslFrameGetNextBuffer(gDslVars, pFrBuffer) \ -+ gDslFrameFunc.__DslFrameGetNextBuffer(pFrBuffer) -+ -+#define DslFrameSetNextBuffer(gDslVars, pFrBuf, pFrBufNext) \ -+ gDslFrameFunc.__DslFrameSetNextBuffer(pFrBuf, pFrBufNext) -+ -+#define DslFrameGetLastBuffer(gDslVars, pFrame) \ -+ gDslFrameFunc.__DslFrameGetLastBuffer(pFrame) -+ -+#define DslFrameGetLinkFieldAddress(gDslVars, f) \ -+ gDslFrameFunc.__DslFrameGetLinkFieldAddress(f) -+ -+#define DslFrameGetFrameAddressFromLink(gDslVars, lnk) \ -+ gDslFrameFunc.__DslFrameGetFrameAddressFromLink(lnk) -+ -+ -+#define DslFrameGetOobInfo(gDslVars, f, pOobInfo) \ -+ gDslFrameFunc.__DslFrameGetOobInfo(f, pOobInfo) -+ -+#define DslFrameSetOobInfo(gDslVars, f, pOobInfo) \ -+ gDslFrameFunc.__DslFrameSetOobInfo(f, pOobInfo) -+ -+ -+#define DslFrameEnqueBufferAtBack(gDslVars, f, b) \ -+ gDslFrameFunc.__DslFrameEnqueBufferAtBack(f, b) -+ -+#define DslFrameEnqueFrameAtBack(gDslVars, fMain, f) \ -+ gDslFrameFunc.__DslFrameEnqueFrameAtBack(fMain, f) -+ -+#define DslFrameEnqueBufferAtFront(gDslVars, f, b) \ -+ gDslFrameFunc.__DslFrameEnqueBufferAtFront(f, b) -+ -+#define DslFrameEnqueFrameAtFront(gDslVars, fMain, f) \ -+ gDslFrameFunc.__DslFrameEnqueFrameAtFront(fMain, f) -+ -+#define DslFrameDequeBuffer(gDslVars, pFrame) \ -+ gDslFrameFunc.__DslFrameDequeBuffer(pFrame) -+ -+#define DslFrameAllocMemForFrames(gDslVars, frameNum) \ -+ gDslFrameFunc.__DslFrameAllocMemForFrames(frameNum) -+ -+#define DslFrameFreeMemForFrames(gDslVars, hMem) \ -+ gDslFrameFunc.__DslFrameFreeMemForFrames(hMem) -+ -+#define DslFrameAllocFrame(gDslVars, handle) \ -+ gDslFrameFunc.__DslFrameAllocFrame(handle) -+ -+#define DslFrameFreeFrame(gDslVars, handle, pFrame) \ -+ gDslFrameFunc.__DslFrameFreeFrame(handle, pFrame) -+ -+#define DslFrameAllocMemForBuffers(gDslVars, ppMemPool, bufNum, memSize) \ -+ gDslFrameFunc.__DslFrameAllocMemForBuffers(ppMemPool, bufNum, memSize) -+ -+#define DslFrameFreeMemForBuffers(gDslVars, hMem, memSize, pMemPool) \ -+ gDslFrameFunc.__DslFrameFreeMemForBuffers(hMem, memSize, pMemPool) -+ -+#define DslFrameAllocBuffer(gDslVars, handle, pMem, length) \ -+ gDslFrameFunc.__DslFrameAllocBuffer(handle, pMem, length) -+ -+#define DslFrameFreeBuffer(gDslVars, handle, pBuf) \ -+ gDslFrameFunc.__DslFrameFreeBuffer(handle, pBuf) -+ -+#define DslFrame2Id(gDslVars, handle, pFrame) \ -+ gDslFrameFunc.__DslFrame2Id(handle, pFrame) -+ -+#define DslFrameId2Frame(gDslVars, handle, frameId) \ -+ gDslFrameFunc.__DslFrameId2Frame (handle, frameId) -+ -+ -+#endif /* SoftDslGlobals */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftDsl.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftDsl.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftDsl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftDsl.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,2920 @@ -+/**************************************************************************** -+ * -+ * SoftDsl.h -+ * -+ * -+ * Description: -+ * This file contains the exported interface for SoftDsl.c -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.275 $ -+ * -+ * $Id: SoftDsl.h,v 1.275 2005/04/28 22:55:36 ilyas Exp $ -+ * -+ * $Log: SoftDsl.h,v $ -+ * Revision 1.275 2005/04/28 22:55:36 ilyas -+ * Cleaned up kDslG992RunAnnexaP3ModeInAnnexaP5, kG992EnableAnnexM and kDslAtuChangeTxFilterRequest definitions -+ * -+ * Revision 1.274 2005/04/27 20:57:32 yongbing -+ * Implement 32 frequency break points for TSSI, PR 30211 -+ * -+ * Revision 1.273 2005/04/02 03:27:52 kdu -+ * PR30236: Define kDslEnableRoundUpDSLoopAttn, this is shared with kDslCentilliumCRCWorkAroundEnabled. -+ * -+ * Revision 1.272 2005/04/01 21:56:39 ilyas -+ * Added more test commands definitions -+ * -+ * Revision 1.271 2005/02/11 05:03:57 ilyas -+ * Added support for DslOs -+ * -+ * Revision 1.270 2005/02/11 03:33:22 lke -+ * Support 2X, 4X, and 8X spectrum in ANNEX_I DS -+ * -+ * Revision 1.269 2005/01/08 00:11:58 ilyas -+ * Added definition for AnnexL status -+ * -+ * Revision 1.268 2004/12/18 00:52:35 mprahlad -+ * Add Dig US Pwr cutback status -+ * -+ * Revision 1.267 2004/11/08 22:21:38 ytan -+ * init swap state after retrain -+ * -+ * Revision 1.266 2004/11/05 21:16:50 ilyas -+ * Added support for pwmSyncClock -+ * -+ * Revision 1.265 2004/10/28 20:05:17 gsyu -+ * Fixed compilation errors for simulation targets -+ * -+ * Revision 1.264 2004/10/23 00:16:35 nino -+ * Added kDslHardwareSetRcvAGC status to set absolute rcv agc gain. -+ * -+ * Revision 1.263 2004/10/22 21:21:06 ilyas -+ * Fixed bit definition overlap in demodCapabilities -+ * -+ * Revision 1.262 2004/10/20 00:43:20 gsyu -+ * Added constants to support new xmt sample buffer control scheme -+ * -+ * Revision 1.261 2004/10/12 01:09:28 nino -+ * Remove kDslHardwareEnablePwmSyncClk and kDslHardwareSetPwmSyncClkFreq -+ * status definitions. Add kDslEnablePwmSyncClk and kDslSetPwmSyncClkFreq -+ * command definitions. -+ * -+ * Revision 1.260 2004/10/11 20:21:26 nino -+ * Added kDslHardwareEnablePwmSyncClk and kDslHardwareSetPwmSynClkFreq hardware statuses. -+ * -+ * Revision 1.259 2004/10/07 19:17:29 nino -+ * Added kDslHardwareGetRcvAGC status. -+ * -+ * Revision 1.258 2004/10/02 00:17:14 nino -+ * Added kDslHardwareAGCSetPga2 and kDslSetPilotEyeDisplay status definitions. -+ * -+ * Revision 1.257 2004/08/27 01:00:30 mprahlad -+ * -+ * Keep kDslAtuChangeTxFilterRequest defined by default so ADSL1 only targets can -+ * build -+ * -+ * Revision 1.256 2004/08/20 19:00:34 ilyas -+ * Added power management code for 2+ -+ * -+ * Revision 1.255 2004/08/17 23:18:25 kdu -+ * Merged interop changes for TDC lab from a023e9. -+ * -+ * Revision 1.254 2004/07/22 00:56:03 yongbing -+ * Add ADSL2 Annex B modulation definition -+ * -+ * Revision 1.253 2004/07/16 22:23:28 nino -+ * - Defined macros to extract subcarrier and supported set information -+ * for tssi. Subcarrier and suported set indicator is packed into -+ * dsSubcarrier index array. -+ * -+ * Revision 1.252 2004/07/01 00:11:22 nino -+ * Added preliminary code for debugDataHandler (inside of #if DEBUG_DATA_HANDLER). -+ * -+ * Revision 1.251 2004/06/24 03:08:39 ilyas -+ * Added GFC mapping control for ATM bonding -+ * -+ * Revision 1.250 2004/06/23 00:03:20 khp -+ * - shorten self test result register length to 1 (satisfied requirement -+ * at DT, no known requirement anywhere else) -+ * -+ * Revision 1.249 2004/06/15 20:18:33 ilyas -+ * Made D uchar again for compatibility with older ADSl drivers that use this structure. ADSL driver will rely on G992p3 parameters for large D -+ * -+ * Revision 1.248 2004/06/12 00:26:03 gsyu -+ * Added constants for AnnexM -+ * -+ * Revision 1.247 2004/06/10 18:53:24 yjchen -+ * add large D support -+ * -+ * Revision 1.246 2004/06/04 01:55:00 linyin -+ * Add a constant for SRA enable/disable -+ * -+ * Revision 1.245 2004/05/19 23:22:23 linyin -+ * Support L2 -+ * -+ * Revision 1.244 2004/05/15 03:04:58 ilyas -+ * Added L3 test definition -+ * -+ * Revision 1.243 2004/05/14 03:04:38 ilyas -+ * Fixed structure name typo -+ * -+ * Revision 1.242 2004/05/14 02:01:01 ilyas -+ * Fixed structure name typo -+ * -+ * Revision 1.241 2004/05/14 01:21:49 nino -+ * Added kDslSignalAttenuation, kDslAttainableNetDataRate kDslHLinScale constant definitions. -+ * -+ * Revision 1.240 2004/05/13 19:07:58 ilyas -+ * Added new statuses for ADSL2 -+ * -+ * Revision 1.239 2004/05/01 01:09:51 ilyas -+ * Added power management command and statuses -+ * -+ * Revision 1.238 2004/04/23 22:50:38 ilyas -+ * Implemented double buffering to ensure G.997 HDLC frame (OvhMsg) is continuous -+ * -+ * Revision 1.237 2004/03/31 18:57:39 ilyas -+ * Added drop on data error capability control -+ * -+ * Revision 1.236 2004/03/30 03:11:30 ilyas -+ * Added #ifdef for CFE build -+ * -+ * Revision 1.235 2004/03/29 23:06:39 ilyas -+ * Added status for BG table update -+ * -+ * Revision 1.234 2004/03/17 02:49:49 ilyas -+ * Turn off ATM bit reversal for Alcatel DSLAM only -+ * -+ * Revision 1.233 2004/03/11 03:09:48 mprahlad -+ * Add test mode for afeloopback test -+ * -+ * Revision 1.232 2004/03/10 23:15:53 ilyas -+ * Added ETSI modem support -+ * -+ * Revision 1.231 2004/03/04 19:28:14 linyin -+ * Support adsl2plus -+ * -+ * Revision 1.230 2004/02/28 00:06:21 ilyas -+ * Added OLR message definitions for ADSL2+ -+ * -+ * Revision 1.229 2004/02/13 03:21:15 mprahlad -+ * define kDslAturHwAgcMaxGain correctly for 6348 -+ * -+ * Revision 1.228 2004/02/09 05:06:17 yongbing -+ * Add ADSL2 bit swap function -+ * -+ * Revision 1.227 2004/02/04 02:08:19 linyin -+ * remove the redefined kG992p5AnnexA -+ * -+ * Revision 1.226 2004/02/04 01:41:48 linyin -+ * Add some variables for G992P5 -+ * -+ * Revision 1.225 2004/02/03 19:12:22 gsyu -+ * Added a dedicate structure and constants for G992P5 -+ * -+ * Revision 1.224 2004/01/24 01:18:34 ytan -+ * add multi-section swapping flag -+ * -+ * Revision 1.223 2004/01/17 00:21:48 ilyas -+ * Added commands and statuses for OLR -+ * -+ * Revision 1.222 2004/01/13 19:12:37 gsyu -+ * Added more constants for Double upstream -+ * -+ * Revision 1.221 2003/12/23 21:19:04 mprahlad -+ * Define BCM6348_TEMP_MOVE_TO_LMEM to FAST_TEXT for 6348 targets - this is for -+ * ADSL2/AnnexA multimode builds - move a few functions to Lmem for now to avoid -+ * changes for swap on 6348. -+ * -+ * Revision 1.220 2003/12/19 21:21:53 ilyas -+ * Added dying gasp support for ADSL2 -+ * -+ * Revision 1.219 2003/12/05 02:09:51 mprahlad -+ * Leave the AnalogEC defs in - saves ifdef-ing all uses of these defines. -+ * Include Bcm6345_To_Bcm6348.h - to be able to pick up macros for the -+ * transition -+ * -+ * Revision 1.218 2003/12/04 02:10:58 linyin -+ * Redefine some constants for supporting different pilot and TTR -+ * -+ * Revision 1.217 2003/12/03 02:24:39 gsyu -+ * Reverse previous check in for Double Upstream demo -+ * -+ * Revision 1.215 2003/11/20 00:58:47 yongbing -+ * Merge ADSL2 functionalities into Annex A branch -+ * -+ * Revision 1.214 2003/11/06 00:35:06 nino -+ * Added kDslWriteAfeRegCmd and kDslReadAfeRegCmd commands. -+ * -+ * Revision 1.213 2003/11/05 21:04:23 ilyas -+ * Added more codes for LOG data -+ * -+ * Revision 1.212 2003/10/22 00:51:52 yjchen -+ * define constant for quiet line noise -+ * -+ * Revision 1.211 2003/10/20 22:08:57 nino -+ * Added kDslSetRcvGainCmd and kDslBypassRcvHpfCmd debug commands. -+ * -+ * Revision 1.210 2003/10/18 00:04:59 yjchen -+ * define constants for G992P3 diagnostic mode channel response -+ * -+ * Revision 1.209 2003/10/17 22:41:29 yongbing -+ * Add INP message support -+ * -+ * Revision 1.208 2003/10/16 00:06:09 uid1249 -+ * Moved G.994 definitions from G.994p1MainTypes.h -+ * -+ * Revision 1.207 2003/10/15 20:45:11 linyin -+ * Add some constants for support Revision 2 -+ * -+ * Revision 1.206 2003/10/14 22:04:02 ilyas -+ * Added Nino's AFE statuses for 6348 -+ * -+ * Revision 1.205 2003/10/10 18:49:26 gsyu -+ * Added test modes to workaround the clock domain crossing bug, PR18038 -+ * -+ * Revision 1.204 2003/09/30 19:27:46 mprahlad -+ * ifdef AnalogEC definies with #ifndef BCM6348_SRC -+ * -+ * Revision 1.203 2003/09/26 19:36:34 linyin -+ * Add annexi constant and vars -+ * -+ * Revision 1.202 2003/09/25 20:16:13 yjchen -+ * remove featureNTR definition -+ * -+ * Revision 1.201 2003/09/08 20:29:51 ilyas -+ * Added test commands for chip regression tests -+ * -+ * Revision 1.200 2003/08/26 00:58:14 ilyas -+ * Added I432 reset command (for header compression) -+ * Fixed SoftDsl time (for I432 header compression) -+ * -+ * Revision 1.199 2003/08/26 00:37:29 ilyas -+ * #ifdef'ed DslFrameFunctions in dslCommand structure to save space -+ * -+ * Revision 1.198 2003/08/22 22:45:00 liang -+ * Change the NF field in G992CodingParams from uchar to ushort to support K=256 (dataRate=255*32kbps) in fast path. -+ * -+ * Revision 1.197 2003/08/21 21:19:05 ilyas -+ * Changed dataPumpCapabilities structure for G992P3 -+ * -+ * Revision 1.196 2003/08/12 22:44:28 khp -+ * - for Haixiang: added kDslTestMarginTweak command and marginTweakSpec -+ * -+ * Revision 1.195 2003/07/24 17:28:16 ovandewi -+ * added Tx filter change request code -+ * -+ * Revision 1.194 2003/07/24 15:48:55 yongbing -+ * Reduce TSSI buffer size to avoid crash at the beginning of G.994.1. Need to find out why -+ * -+ * Revision 1.193 2003/07/19 07:11:47 nino -+ * Revert back to version 1.191. -+ * -+ * Revision 1.191 2003/07/17 21:25:25 yongbing -+ * Add support for READSL2 and TSSI -+ * -+ * Revision 1.190 2003/07/14 19:42:33 yjchen -+ * add constants for G992P3 -+ * -+ * Revision 1.189 2003/07/10 23:07:11 liang -+ * Add demodCapability bit to minimize showtime ATUC xmt power through b&g table. -+ * -+ * Revision 1.188 2003/07/08 22:18:50 liang -+ * Added demodCapability bit for G.994.1 Annex A multimode operation. -+ * -+ * Revision 1.187 2003/07/07 23:24:43 ilyas -+ * Added G.dmt.bis definitions -+ * -+ * Revision 1.186 2003/06/25 02:44:02 liang -+ * Added demod capability bit kDslUE9000ADI918FECFixEnabled. -+ * Added back kDslHWEnableAnalogECUpdate & kDslHWEnableAnalogEC for backward compatibility (annex A). -+ * -+ * Revision 1.185 2003/06/18 01:39:19 ilyas -+ * Added AFE test commands. Add #defines for driver's builds -+ * -+ * Revision 1.184 2003/06/06 23:58:09 ilyas -+ * Added command and status for standalone AFE tests -+ * -+ * Revision 1.183 2003/05/29 21:09:32 nino -+ * - kDslHWEnableAnalogECUpdate define replaced with kDslHWSetDigitalEcUpdateMode -+ * - kDslHWEnableAnalogEC define replaced with kDslHWDisableDigitalECUpdate -+ * -+ * Revision 1.182 2003/04/15 22:08:15 liang -+ * Changed one of the demodCapability bit name from last checkin. -+ * -+ * Revision 1.181 2003/04/13 19:25:54 liang -+ * Added three more demodCapability bits. -+ * -+ * Revision 1.180 2003/04/02 02:09:17 liang -+ * Added demodCapability bit for ADI low rate option fix disable. -+ * -+ * Revision 1.179 2003/03/18 18:22:06 yongbing -+ * Use 32 tap TEQ for Annex I -+ * -+ * Revision 1.178 2003/03/06 00:58:07 ilyas -+ * Added SetStausBuffer command -+ * -+ * Revision 1.177 2003/02/25 00:46:26 ilyas -+ * Added T1.413 EOC vendor ID -+ * -+ * Revision 1.176 2003/02/21 23:30:54 ilyas -+ * Added Xmtgain command framing mode status and T1413VendorId parameters -+ * -+ * Revision 1.175 2003/02/07 22:13:55 liang -+ * Add demodCapabilities bits for sub-sample alignment and higher T1.413 level (used internally only). -+ * -+ * Revision 1.174 2003/01/23 02:54:07 liang -+ * Added demod capability bit for bitswap enable. -+ * -+ * Revision 1.173 2002/12/13 18:36:33 yongbing -+ * Add support for G.992.2 Annex C -+ * -+ * Revision 1.172 2002/12/10 23:27:12 ilyas -+ * Extended dslException parameter structure to allow printout from DslDiags -+ * -+ * Revision 1.171 2002/12/06 02:10:19 liang -+ * Moved the T1.413 RAck1/RAck2 switching variables to connection setup structure. -+ * Added/Modified the training progress codes for T1.413 RAck1/RAck2 and upstream 2x IFFT disable. -+ * -+ * Revision 1.170 2002/11/11 00:20:05 liang -+ * Add demod capability constant for internally disabling upstream 2x IFFT in T1.413 mode. -+ * -+ * Revision 1.169 2002/11/06 03:46:19 liang -+ * Add training progress code for upstream 2x IFFT disable. -+ * -+ * Revision 1.168 2002/11/01 01:41:06 ilyas -+ * Added flags for Centillium 4103 workarround -+ * -+ * Revision 1.167 2002/10/26 01:26:11 gsyu -+ * Move SoftDslLineHandler from SDRAM to LMEM -+ * -+ * Revision 1.166 2002/10/20 18:56:20 khp -+ * - for linyin -+ * - #ifdef NEC_NSIF_WORKAROUND: -+ * - add macros to extract NSIF status and fail counter vars -+ * -+ * Revision 1.165 2002/10/14 05:24:35 liang -+ * Add training status code to request alternate xmt filter (for Samsung 6-port ADI918 DSLAMs) to meet KT 2km spec. -+ * -+ * Revision 1.164 2002/10/08 21:44:50 ilyas -+ * Fixed EOC stuffing byte to indicate "no synchronization" action -+ * -+ * Revision 1.163 2002/10/03 19:34:24 ilyas -+ * Added size for EOC serial number register -+ * -+ * Revision 1.162 2002/09/28 02:42:27 yongbing -+ * Add retrain in T1.413 with R-Ack1 tone -+ * -+ * Revision 1.161 2002/09/28 01:23:35 gsyu -+ * Reverse us2xifft change so that we can install new us2xifft on the tree -+ * -+ * Revision 1.160 2002/09/26 23:30:48 yongbing -+ * Add synch symbol detection in Showtime -+ * -+ * Revision 1.159 2002/09/20 23:47:52 khp -+ * - for gsyu: enable 2X IFFT for Annex A (XMT_FFT_SIZE_2X) -+ * -+ * Revision 1.158 2002/09/14 03:26:39 ilyas -+ * Changed far-end RDI reporting -+ * -+ * Revision 1.157 2002/09/13 21:10:54 ilyas -+ * Added reporting of remote modem LOS and RDI. -+ * Moved G992CodingParams definition to SoftDsl.h -+ * -+ * Revision 1.156 2002/09/12 21:07:19 ilyas -+ * Added HEC, OCD and LCD counters -+ * -+ * Revision 1.155 2002/09/09 21:31:30 linyin -+ * Add two constant to support long reach -+ * -+ * Revision 1.154 2002/09/07 01:31:51 ilyas -+ * Added support for OEM parameters -+ * -+ * Revision 1.153 2002/09/04 22:36:14 mprahlad -+ * defines for non standard info added -+ * -+ * Revision 1.152 2002/08/02 21:59:09 liang -+ * Enable G.992.2 carrierInfo in capabitilities when G.992.1 annex A is used for G.992.2. -+ * -+ * Revision 1.151 2002/07/29 20:01:03 ilyas -+ * Added command for Atm VC map table change -+ * -+ * Revision 1.150 2002/07/18 22:30:47 liang -+ * Add xmt power and power cutback related constants. -+ * -+ * Revision 1.149 2002/07/11 01:30:58 ilyas -+ * Changed status for ShowtimeMargin reporting -+ * -+ * Revision 1.148 2002/07/09 19:19:09 ilyas -+ * Added status parameters for ShowtimeSNRMargin info and command to filter -+ * out SNR margin data -+ * -+ * Revision 1.147 2002/06/27 21:50:24 liang -+ * Added test command related demodCapabilities bits. -+ * -+ * Revision 1.146 2002/06/26 21:29:00 liang -+ * Added dsl test cmd structure and showtime margin connection info status. -+ * -+ * Revision 1.145 2002/06/15 05:15:51 ilyas -+ * Added definitions for Ping, Dying Gasp and other test commands -+ * -+ * Revision 1.144 2002/05/30 19:55:15 ilyas -+ * Added status for ADSL PHY MIPS exception -+ * Changed conflicting definition for higher rates (S=1/2) -+ * -+ * Revision 1.143 2002/05/21 23:41:07 yongbing -+ * First check-in of Annex C S=1/2 codes -+ * -+ * Revision 1.142 2002/04/29 22:25:09 georgep -+ * Merge from branch annexC_demo - add status message constants -+ * -+ * Revision 1.141 2002/04/18 19:00:35 ilyas -+ * Added include file for builds in CommEngine environment -+ * -+ * Revision 1.140 2002/04/18 00:18:36 yongbing -+ * Add detailed timeout error messages -+ * -+ * Revision 1.139 2002/04/02 10:03:18 ilyas -+ * Merged BERT from AnnexA branch -+ * -+ * Revision 1.138 2002/03/26 01:42:29 ilyas -+ * Added timeout message constants for annex C -+ * -+ * Revision 1.137 2002/03/22 19:39:22 yongbing -+ * Modify for co-exist of G994P1 and T1P413 -+ * -+ * Revision 1.136 2002/03/22 01:19:40 ilyas -+ * Add status message constants for total FEXT Bits, NEXT bits -+ * -+ * Revision 1.135 2002/03/10 22:32:24 liang -+ * Added report constants for LOS recovery and timing tone index. -+ * -+ * Revision 1.134 2002/03/07 22:06:32 georgep -+ * Replace ifdef G992P1 with G992P1_ANNEX_A for annex A variables -+ * -+ * Revision 1.133 2002/02/16 01:08:18 georgep -+ * Add log constant for showtime mse -+ * -+ * Revision 1.132 2002/02/08 04:36:27 ilyas -+ * Added commands for LOG file and fixed Idle mode pointer update -+ * -+ * Revision 1.131 2002/01/24 20:21:30 georgep -+ * Add logging defines, remove fast retrain defines -+ * -+ * Revision 1.130 2002/01/19 23:59:17 ilyas -+ * Added support for LOG and eye data to ADSL core target -+ * -+ * Revision 1.129 2002/01/16 23:43:54 liang -+ * Remove the carriage return character from last checkin. -+ * -+ * Revision 1.128 2002/01/15 22:27:13 ilyas -+ * Added command for ADSL loopback -+ * -+ * Revision 1.127 2002/01/10 07:18:22 ilyas -+ * Added status for printf (mainly for ADSL core debugging) -+ * -+ * Revision 1.126 2001/12/21 22:45:34 ilyas -+ * Added support for ADSL MIB data object -+ * -+ * Revision 1.125 2001/12/13 02:24:22 ilyas -+ * Added G997 (Clear EOC and G997 framer) support -+ * -+ * Revision 1.124 2001/11/30 05:56:31 liang -+ * Merged top of the branch AnnexBDevelopment onto top of the tree. -+ * -+ * Revision 1.123 2001/11/15 19:01:07 yongbing -+ * Modify only T1.413 part to the top of tree based on AnnexBDevelopment branch -+ * -+ * Revision 1.122 2001/10/19 00:12:07 ilyas -+ * Added support for frame oriented (no ATM) data link layer -+ * -+ * Revision 1.121 2001/10/09 22:35:13 ilyas -+ * Added more ATM statistics and OAM support -+ * -+ * Revision 1.105.2.20 2001/11/27 02:32:03 liang -+ * Combine vendor ID, serial #, and version number into SoftModemVersionNumber.c. -+ * -+ * Revision 1.105.2.19 2001/11/21 01:29:14 georgep -+ * Add a status message define for annexC -+ * -+ * Revision 1.105.2.18 2001/11/08 23:26:28 yongbing -+ * Add carrier selection function for Annex A and B -+ * -+ * Revision 1.105.2.17 2001/11/07 22:55:30 liang -+ * Report G992 rcv msg CRC error as what it is instead of time out. -+ * -+ * Revision 1.105.2.16 2001/11/05 19:56:21 liang -+ * Add DC offset info code. -+ * -+ * Revision 1.105.2.15 2001/10/16 00:47:16 yongbing -+ * Add return-to-T1p413 starting point if in error -+ * -+ * Revision 1.105.2.14 2001/10/15 23:14:01 yjchen -+ * remove ADSL_SINGLE_SYMBOL_BLOCK -+ * -+ * Revision 1.105.2.13 2001/10/12 18:07:16 yongbing -+ * Add support for T1.413 -+ * -+ * Revision 1.105.2.12 2001/10/04 00:23:52 liang -+ * Add connection info constants for TEQ coef and PSD. -+ * -+ * Revision 1.105.2.11 2001/10/03 01:44:01 liang -+ * Merged with codes from main tree (tag SoftDsl_2_18). -+ * -+ * Revision 1.105.2.10 2001/09/28 22:10:04 liang -+ * Add G994 exchange message status reports. -+ * -+ * Revision 1.105.2.9 2001/09/26 18:08:21 georgep -+ * Send status error message in case features field is not setup properly -+ * -+ * Revision 1.105.2.8 2001/09/05 01:58:13 georgep -+ * Added status message for annexC measured delay -+ * -+ * Revision 1.105.2.7 2001/08/29 00:37:52 georgep -+ * Add log constants for annexC -+ * -+ * Revision 1.105.2.6 2001/08/18 00:01:34 georgep -+ * Add constants for annexC -+ * -+ * Revision 1.105.2.5 2001/08/08 17:33:28 yongbing -+ * Merge with tag SoftDsl_2_17 -+ * -+ * Revision 1.120 2001/08/29 02:56:01 ilyas -+ * Added tests for flattening/unflatenning command and statuses (dual mode) -+ * -+ * Revision 1.119 2001/08/28 03:26:32 ilyas -+ * Added support for running host and adsl core parts separately ("dual" mode) -+ * -+ * Revision 1.118 2001/08/16 02:16:10 khp -+ * - mark functions with FAST_TEXT to reduce cycle counts for QPROC targets -+ * (replaces use of LMEM_INSN) -+ * -+ * Revision 1.117 2001/06/18 20:06:35 ilyas -+ * Added forward declaration of dslCommandStruc to avoid gcc warnings -+ * -+ * Revision 1.116 2001/06/18 19:49:36 ilyas -+ * Changes to include support for HOST_ONLY mode -+ * -+ * Revision 1.115 2001/06/01 22:00:33 ilyas -+ * Changed ATM PHY interface to accomodate UTOPIA needs -+ * -+ * Revision 1.114 2001/05/16 06:22:24 liang -+ * Added status reports for xmt & rcv prefix enable position. -+ * -+ * Revision 1.113 2001/05/02 20:34:32 georgep -+ * Added log constants for snr1 calculation -+ * -+ * Revision 1.112 2001/04/25 01:20:11 ilyas -+ * -+ * Don't use DSL frame functions if ATM_LAYER is not defined -+ * -+ * Revision 1.111 2001/04/17 21:13:00 georgep -+ * Define status constant kDslHWSetDigitalEcUpdateShift -+ * -+ * Revision 1.110 2001/04/16 23:38:36 georgep -+ * Add HW AGC constants for ATUR -+ * -+ * Revision 1.109 2001/04/06 23:44:53 georgep -+ * Added status constant for setting up digitalEcGainShift -+ * -+ * Revision 1.108 2001/03/29 05:58:34 liang -+ * Replaced the Aware compatibility codes with automatic detection codes. -+ * -+ * Revision 1.107 2001/03/25 06:11:22 liang -+ * Combined separate loop attenuation status for ATUR & ATUC into one status. -+ * Replace separate hardware AGC info status for ATUR & ATUC into hardware AGC -+ * request status and hardware AGC obtained status. -+ * Use store AGC command to save hardware AGC value instead of returning value -+ * from status report. -+ * -+ * Revision 1.106 2001/03/24 00:43:22 liang -+ * Report more checksum results (NumOfCalls, txSignal, rxSignal & eyeData). -+ * -+ * Revision 1.105 2001/03/16 23:57:31 georgep -+ * Added more loop attenuation reporting status constants -+ * -+ * Revision 1.104 2001/03/15 00:22:07 liang -+ * Back to version 1.101. -+ * -+ * Revision 1.103 2001/03/15 00:03:44 yjchen -+ * use kDslATURHardwareAGCInfo for AltoE14 AGC as well -+ * -+ * Revision 1.102 2001/03/14 23:10:56 yjchen -+ * add defns for AltoE14 AGC -+ * -+ * Revision 1.101 2001/03/08 23:31:34 georgep -+ * Added R, S, D, coding parameters to dslDataPumpCapabilities -+ * -+ * Revision 1.100 2001/02/10 03:03:09 ilyas -+ * Added one more DslFrame function -+ * -+ * Revision 1.99 2001/02/09 01:55:27 ilyas -+ * Added status codes and macros to support printing of AAL packets -+ * -+ * Revision 1.98 2001/01/30 23:28:10 georgep -+ * Added kDslDspControlStatus for handling changes to dsp params -+ * -+ * Revision 1.97 2001/01/12 01:17:18 georgep -+ * Added bit in demodCapabilities for analog echo cancellor -+ * -+ * Revision 1.96 2001/01/04 05:51:03 ilyas -+ * Added more dslStatuses -+ * -+ * Revision 1.95 2000/12/21 05:46:07 ilyas -+ * Added name for struct _dslFrame -+ * -+ * Revision 1.94 2000/12/13 22:04:39 liang -+ * Add Reed-Solomon coding enable bit in demodCapabilities. -+ * -+ * Revision 1.93 2000/11/29 20:42:02 liang -+ * Add defines for SNR & max achivable rate status and DEC enable demodCapabilities bit. -+ * -+ * Revision 1.92 2000/09/22 21:55:13 ilyas -+ * Added support for DSL + Atm physical layer only (I.432) simulations -+ * -+ * Revision 1.91 2000/09/10 09:20:53 lkaplan -+ * Improve interface for sending Eoc messages -+ * -+ * Revision 1.90 2000/09/08 19:37:58 lkaplan -+ * Added code for handling EOC messages -+ * -+ * Revision 1.89 2000/09/07 23:02:27 georgep -+ * Add HarwareAGC Bit to demod Capabilities -+ * -+ * Revision 1.88 2000/09/01 00:57:34 georgep -+ * Added Hardware AGC status defines -+ * -+ * Revision 1.87 2000/08/31 19:04:26 liang -+ * Added external reference for stack size requirement test functions. -+ * -+ * Revision 1.86 2000/08/24 23:16:46 liang -+ * Increased sample block size for noBlock. -+ * -+ * Revision 1.85 2000/08/23 18:34:39 ilyas -+ * Added XxxVcConfigure function -+ * -+ * Revision 1.84 2000/08/05 00:25:04 georgep -+ * Redefine sampling freq constants -+ * -+ * Revision 1.83 2000/08/03 14:04:00 liang -+ * Add hardware time tracking clock error reset code. -+ * -+ * Revision 1.82 2000/07/23 20:52:52 ilyas -+ * Added xxxFrameBufSetAddress() function for ATM framer layers -+ * Rearranged linkLayer functions in one structure which is passed as a -+ * parameter to xxxLinkLayerInit() function to be set there -+ * -+ * Revision 1.81 2000/07/18 20:03:24 ilyas -+ * Changed DslFrame functions definitions to macros, -+ * Removed gDslVars from their parameter list -+ * -+ * Revision 1.80 2000/07/17 21:08:15 lkaplan -+ * removed global pointer -+ * -+ * Revision 1.79 2000/06/21 20:38:44 georgep -+ * Added bit to demodCapabilities for HW_TIME_TRACKING -+ * -+ * Revision 1.78 2000/06/19 19:57:55 georgep -+ * Added constants for logging of HWResampler data -+ * -+ * Revision 1.77 2000/06/02 18:57:21 ilyas -+ * Added support for DSL buffers consisting of many ATM cells -+ * -+ * Revision 1.76 2000/05/27 02:19:28 liang -+ * G992MonitorParams structure is moved here, and Tx/Rx data handler type definitions changed. -+ * -+ * Revision 1.75 2000/05/15 18:17:21 liang -+ * Added statuses for sent and received frames -+ * -+ * Revision 1.74 2000/05/14 01:56:38 ilyas -+ * Added ATM cell printouts -+ * -+ * Revision 1.73 2000/05/09 23:00:26 ilyas -+ * Added ATM status messages, ATM timer, Tx frames flush on timeout -+ * Fixed a bug - adding flushed Tx frames to the list of free Rx frames -+ * -+ * Revision 1.72 2000/05/03 18:01:18 georgep -+ * Removed old function declarations for Eoc/Aoc -+ * -+ * Revision 1.71 2000/05/03 03:57:04 ilyas -+ * Added LOG file support for writing ATM data -+ * -+ * Revision 1.70 2000/05/02 00:04:36 liang -+ * Add showtime monitoring and message exchange info constants. -+ * -+ * Revision 1.69 2000/04/28 23:34:20 yongbing -+ * Add constants for reporting error events in performance monitoring -+ * -+ * Revision 1.68 2000/04/21 23:09:04 liang -+ * Added G992 time out training progress constant. -+ * -+ * Revision 1.67 2000/04/19 00:31:47 ilyas -+ * Added global SoftDsl functions for Vc, added OOB info functions -+ * -+ * Revision 1.66 2000/04/18 00:45:31 yongbing -+ * Add G.DMT new frame structure, define G992P1_NEWFRAME to enable, need ATM layer to work -+ * -+ * Revision 1.65 2000/04/15 01:48:34 georgep -+ * Added T1p413 status constants -+ * -+ * Revision 1.64 2000/04/13 08:36:22 yura -+ * Added SoftDslSetRefData, SoftDslGetRefData functions -+ * -+ * Revision 1.63 2000/04/13 05:42:35 georgep -+ * Added constant for T1p413 -+ * -+ * Revision 1.62 2000/04/05 21:49:54 liang -+ * minor change. -+ * -+ * Revision 1.61 2000/04/04 04:16:06 liang -+ * Merged with SoftDsl_0_03 from old tree. -+ * -+ * Revision 1.65 2000/04/04 01:47:21 ilyas -+ * Implemented abstract dslFrame and dslFrameBuffer objects -+ * -+ * Revision 1.64 2000/04/01 08:12:10 yura -+ * Added preliminary revision of the SoftDsl driver architecture -+ * -+ * Revision 1.63 2000/04/01 02:55:33 georgep -+ * New defines for G992p2Profile Structure -+ * -+ * Revision 1.62 2000/04/01 00:50:36 yongbing -+ * Add initial version of new frame structure for full-rate -+ * -+ * Revision 1.61 2000/03/24 03:30:45 georgep -+ * Define new constant kDslUpstreamSamplingFreq -+ * -+ * Revision 1.60 2000/03/23 19:51:30 georgep -+ * Define new features bits for G992p1 -+ * -+ * Revision 1.59 2000/03/18 01:28:41 georgep -+ * Changed connectionSetup to include G992p1 Capabilities -+ * -+ * Revision 1.58 2000/02/29 01:40:03 georgep -+ * Changed modulationtype defines to be the same as SPAR1 in G994p1 -+ * -+ * Revision 1.57 1999/11/19 01:03:19 george -+ * Use Block Size 256 for single symbol Mode -+ * -+ * Revision 1.56 1999/11/18 02:37:43 george -+ * Porting to 16Bit -+ * -+ * Revision 1.55 1999/11/12 02:12:55 george -+ * Added status constant for reporting of profile channel matching calculation -+ * -+ * Revision 1.54 1999/11/11 19:19:42 george -+ * Porting to 16Bit Compiler -+ * -+ * Revision 1.53 1999/11/05 01:27:06 liang -+ * Add recovery-from-inpulse-noise progress report. -+ * -+ * Revision 1.52 1999/11/02 02:06:27 george -+ * Added SNRMargin training status value -+ * -+ * Revision 1.51 1999/10/27 23:02:03 wan -+ * Add G.994.1 setup in dslConnectionSetupStruct for setting up Initiation side -+ * -+ * Revision 1.50 1999/10/25 21:55:36 liang -+ * Renamed the constant for FEQ output error. -+ * -+ * Revision 1.49 1999/10/23 02:20:55 george -+ * Add debug data codes -+ * -+ * Revision 1.48 1999/10/19 23:59:06 liang -+ * Change line handler interface to work with nonsymmetric sampling freq. -+ * -+ * Revision 1.47 1999/10/09 01:38:04 george -+ * Define maxProfileNumber -+ * -+ * Revision 1.46 1999/10/07 23:30:51 wan -+ * Add G.994.1 Tone and Fast Retrain Recov detections in G.992p2 SHOWTIME and Fast Retrain -+ * -+ * Revision 1.45 1999/10/06 13:59:27 liang -+ * Escape to G994.1 should be done through status instead of command. -+ * -+ * Revision 1.44 1999/10/06 02:01:28 george -+ * Add kDslReturnToG994p1Cmd -+ * -+ * Revision 1.43 1999/09/30 19:29:58 george -+ * Add reporting constant for Fast Retrain -+ * -+ * Revision 1.42 1999/09/16 23:41:56 liang -+ * Added command for host forced retrain. -+ * -+ * Revision 1.41 1999/08/20 00:47:25 wan -+ * Add constants for Fast Retrain progress status -+ * -+ * Revision 1.40 1999/08/16 18:06:01 wan -+ * Add more reporting constants for Fast Retrain -+ * -+ * Revision 1.39 1999/08/12 00:18:10 wan -+ * Add several Fast Retrain Status constants -+ * -+ * Revision 1.38 1999/08/10 18:25:38 george -+ * Define constants used for Fast Retrain -+ * -+ * Revision 1.37 1999/07/31 01:47:43 george -+ * Add status constants for eoc/aoc -+ * -+ * Revision 1.36 1999/07/27 18:19:52 george -+ * declare aoc/eoc functions -+ * -+ * Revision 1.35 1999/07/19 22:44:47 george -+ * Add constants for G994p1 Message Exchange -+ * -+ * Revision 1.34 1999/07/16 02:03:03 liang -+ * Modified Dsl link layer command spec structure. -+ * -+ * Revision 1.33 1999/07/14 22:53:16 george -+ * Add Constants for G994p1 -+ * -+ * Revision 1.32 1999/07/13 00:02:26 liang -+ * Added more feature bits. -+ * -+ * Revision 1.31 1999/07/09 01:58:14 wan -+ * Added more constants G.994.1 testing reports -+ * -+ * Revision 1.30 1999/07/07 23:51:04 liang -+ * Added rcv power and loop attenuation reports. -+ * -+ * Revision 1.29 1999/07/06 21:32:01 liang -+ * Added some aux. feature bits, and field performanceMargin was changed to noiseMargin in Capabilities. -+ * -+ * Revision 1.28 1999/07/03 01:40:17 liang -+ * Redefined dsl command parameter list and added connection setup struct. -+ * -+ * Revision 1.27 1999/07/02 00:41:18 liang -+ * Add bit and gain logging as well as rcv carrier range status. -+ * -+ * Revision 1.26 1999/06/25 21:37:10 wan -+ * Work in progress for G994.1. -+ * -+ * Revision 1.25 1999/06/16 00:54:36 liang -+ * Added Tx/Rx SHOWTIME active training progress codes. -+ * -+ * Revision 1.24 1999/06/11 21:59:37 wan -+ * Added G994.1 fail status constant. -+ * -+ * Revision 1.23 1999/06/11 21:29:01 liang -+ * Constants for C/R-Msgs was changed to C/R-Msg. -+ * -+ * Revision 1.22 1999/06/08 02:49:42 liang -+ * Added SNR data logging. -+ * -+ * Revision 1.21 1999/06/07 21:05:08 liang -+ * Added more training status values. -+ * -+ * Revision 1.20 1999/05/22 02:18:26 liang -+ * More constant defines. -+ * -+ * Revision 1.19 1999/05/14 22:49:35 liang -+ * Added more status codes and debug data codes. -+ * -+ * Revision 1.18 1999/04/12 22:41:39 liang -+ * Work in progress. -+ * -+ * Revision 1.17 1999/04/01 20:28:07 liang -+ * Added RReverb detect event status. -+ * -+ * Revision 1.16 1999/03/26 03:29:54 liang -+ * Add DSL debug data constants. -+ * -+ * Revision 1.15 1999/03/08 21:58:00 liang -+ * Added more constant definitions. -+ * -+ * Revision 1.14 1999/03/02 01:49:36 liang -+ * Added more connection info codes. -+ * -+ * Revision 1.13 1999/03/02 00:25:55 liang -+ * Added DSL tx and rx data handler type definitions. -+ * -+ * Revision 1.12 1999/02/27 01:16:55 liang -+ * Increase allowable static memory size to a VERY large number for now. -+ * -+ * Revision 1.11 1999/02/25 00:24:06 liang -+ * Increased symbol block size to 16. -+ * -+ * Revision 1.10 1999/02/23 22:03:26 liang -+ * Increased maximal static memory size allowed. -+ * -+ * Revision 1.9 1999/02/17 02:39:21 ilyas -+ * Changes for NDIS -+ * -+ * Revision 1.8 1999/02/11 22:44:30 ilyas -+ * More definitions for ATM -+ * -+ * Revision 1.7 1999/02/10 01:56:38 liang -+ * Added hooks for G994.1 and G992.2. -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef SoftDslHeader -+#define SoftDslHeader -+ -+/* for builds in Linux/VxWorks CommEngine environment */ -+#if (defined(__KERNEL__) && !defined(LINUX_DRIVER)) || defined(VXWORKS) || defined(_WIN32_WCE) || defined(TARG_OS_RTEMS) || defined(_CFE_) -+#include "AdslCoreDefs.h" -+#else -+#include "Bcm6345_To_Bcm6348.h" /* File for 45->48 changes */ -+#endif -+ -+#ifndef SoftModemPh -+#include "SoftModem.h" -+#endif -+ -+#ifdef DSL_OS -+#include "DslOs.h" -+#endif -+ -+/* -+** -+** Type definitions -+** -+*/ -+ -+#if defined(ATM) || defined(DSL_PACKET) -+#define DSL_LINKLAYER -+#endif -+ -+#if defined(ATM_LAYER) || defined(DSL_PACKET_LAYER) || defined(G997_1_FRAMER) -+#define DSL_FRAME_FUNCTIONS -+#endif -+ -+#define FLD_OFFSET(type,fld) ((int)(void *)&(((type *)0)->fld)) -+ -+#include "Que.h" -+#include "SoftAtmVc.h" -+ -+typedef struct _dslFrameBuffer -+ { -+ struct _dslFrameBuffer *next; /* link to the next buffer in the frame */ -+ void *pData; /* pointer to data */ -+ ulong length; /* size (in bytes) of data */ -+ } dslFrameBuffer; -+ -+typedef struct _dslFrame -+ { -+ ulong Reserved[3]; -+ -+ ulong totalLength; /* total amount of data in the packet */ -+ int bufCnt; /* buffer counter */ -+ struct _dslFrameBuffer *head; /* first buffer in the chain */ -+ struct _dslFrameBuffer *tail; /* last buffer in the chain */ -+ } dslFrame; -+ -+ -+/* VC types and parameters */ -+ -+#define kDslVcAtm 1 -+ -+typedef struct -+ { -+ ulong vcType; -+ union -+ { -+ atmVcParams atmParams; -+ } params; -+ } dslVcParams; -+ -+/* -+** Assuming that dslVcParams.params is the first field in VC -+** and RefData is the first field in dslVcParams.params -+*/ -+ -+#define DslVcGetRefData(pVc) (*(void **) (pVc)) -+ -+/* Frame OOB types */ -+ -+#define kDslFrameAtm 1 -+ -+typedef struct -+ { -+ ulong frameType; -+ union -+ { -+ atmOobPacketInfo atmInfo; -+ } param; -+ } dslOobFrameInfo; -+ -+ -+typedef struct -+ { -+ ulong (SM_DECL *__DslFrameBufferGetLength) (dslFrameBuffer *fb); -+ void * (SM_DECL *__DslFrameBufferGetAddress) (dslFrameBuffer *fb); -+ void (SM_DECL *__DslFrameBufferSetLength) (dslFrameBuffer *fb, ulong l); -+ void (SM_DECL *__DslFrameBufferSetAddress) (dslFrameBuffer *fb, void *p); -+ -+ void (SM_DECL *__DslFrameInit) (dslFrame *f); -+ ulong (SM_DECL *__DslFrameGetLength) (dslFrame *pFrame); -+ ulong (SM_DECL *__DslFrameGetBufCnt) (dslFrame *pFrame); -+ dslFrameBuffer * (SM_DECL *__DslFrameGetFirstBuffer) (dslFrame *pFrame); -+ dslFrameBuffer * (SM_DECL *__DslFrameGetNextBuffer) (dslFrameBuffer *pFrBuffer); -+ void (SM_DECL *__DslFrameSetNextBuffer) (dslFrameBuffer *pFrBuf, dslFrameBuffer *pFrBufNext); -+ dslFrameBuffer * (SM_DECL *__DslFrameGetLastBuffer) (dslFrame *pFrame); -+ void * (SM_DECL *__DslFrameGetLinkFieldAddress) (dslFrame *f); -+ dslFrame * (SM_DECL *__DslFrameGetFrameAddressFromLink) (void *lnk); -+ -+ Boolean (SM_DECL *__DslFrameGetOobInfo) (dslFrame *f, dslOobFrameInfo *pOobInfo); -+ Boolean (SM_DECL *__DslFrameSetOobInfo) (dslFrame *f, dslOobFrameInfo *pOobInfo); -+ -+ void (SM_DECL *__DslFrameEnqueBufferAtBack) (dslFrame *f, dslFrameBuffer *b); -+ void (SM_DECL *__DslFrameEnqueFrameAtBack) (dslFrame *fMain, dslFrame *f); -+ void (SM_DECL *__DslFrameEnqueBufferAtFront) (dslFrame *f, dslFrameBuffer *b); -+ void (SM_DECL *__DslFrameEnqueFrameAtFront) (dslFrame *fMain, dslFrame *f); -+ dslFrameBuffer * (SM_DECL *__DslFrameDequeBuffer) (dslFrame *pFrame); -+ -+ void * (SM_DECL *__DslFrameAllocMemForFrames) (ulong frameNum); -+ void (SM_DECL *__DslFrameFreeMemForFrames) (void *hMem); -+ dslFrame * (SM_DECL *__DslFrameAllocFrame) (void *handle); -+ void (SM_DECL *__DslFrameFreeFrame) (void *handle, dslFrame *pFrame); -+ void * (SM_DECL *__DslFrameAllocMemForBuffers) (void **ppMemPool, ulong bufNum, ulong memSize); -+ void (SM_DECL *__DslFrameFreeMemForBuffers) (void *hMem, ulong memSize, void *pMemPool); -+ dslFrameBuffer * (SM_DECL *__DslFrameAllocBuffer) (void *handle, void *pMem, ulong length); -+ void (SM_DECL *__DslFrameFreeBuffer) (void *handle, dslFrameBuffer *pBuf); -+ -+ /* for LOG file support */ -+ -+ ulong (SM_DECL *__DslFrame2Id)(void *handle, dslFrame *pFrame); -+ void * (SM_DECL *__DslFrameId2Frame)(void *handle, ulong frameId); -+ } dslFrameFunctions; -+ -+#define DslFrameDeclareFunctions( name_prefix ) \ -+extern ulong SM_DECL name_prefix##BufferGetLength(dslFrameBuffer *fb); \ -+extern void * SM_DECL name_prefix##BufferGetAddress(dslFrameBuffer *fb); \ -+extern void SM_DECL name_prefix##BufferSetLength(dslFrameBuffer *fb, ulong l); \ -+extern void SM_DECL name_prefix##BufferSetAddress(dslFrameBuffer *fb, void *p); \ -+ \ -+extern void SM_DECL name_prefix##Init(dslFrame *f); \ -+extern ulong SM_DECL name_prefix##GetLength (dslFrame *pFrame); \ -+extern ulong SM_DECL name_prefix##GetBufCnt(dslFrame *pFrame); \ -+extern dslFrameBuffer * SM_DECL name_prefix##GetFirstBuffer(dslFrame *pFrame); \ -+extern dslFrameBuffer * SM_DECL name_prefix##GetNextBuffer(dslFrameBuffer *pFrBuffer); \ -+extern void SM_DECL name_prefix##SetNextBuffer(dslFrameBuffer *pFrBuf, dslFrameBuffer *pFrBufNext); \ -+extern dslFrameBuffer * SM_DECL name_prefix##GetLastBuffer(dslFrame *pFrame); \ -+extern void * SM_DECL name_prefix##GetLinkFieldAddress(dslFrame *f); \ -+extern Boolean SM_DECL name_prefix##GetOobInfo(dslFrame *f, dslOobFrameInfo *pOobInfo); \ -+extern Boolean SM_DECL name_prefix##SetOobInfo(dslFrame *f, dslOobFrameInfo *pOobInfo); \ -+extern dslFrame* SM_DECL name_prefix##GetFrameAddressFromLink(void *lnk); \ -+extern void SM_DECL name_prefix##EnqueBufferAtBack(dslFrame *f, dslFrameBuffer *b); \ -+extern void SM_DECL name_prefix##EnqueFrameAtBack(dslFrame *fMain, dslFrame *f); \ -+extern void SM_DECL name_prefix##EnqueBufferAtFront(dslFrame *f, dslFrameBuffer *b); \ -+extern void SM_DECL name_prefix##EnqueFrameAtFront(dslFrame *fMain, dslFrame *f); \ -+extern dslFrameBuffer * SM_DECL name_prefix##DequeBuffer(dslFrame *pFrame); \ -+ \ -+extern void * SM_DECL name_prefix##AllocMemForFrames(ulong frameNum); \ -+extern void SM_DECL name_prefix##FreeMemForFrames(void *hMem); \ -+extern dslFrame * SM_DECL name_prefix##AllocFrame(void *handle); \ -+extern void SM_DECL name_prefix##FreeFrame(void *handle, dslFrame *pFrame); \ -+extern void * SM_DECL name_prefix##AllocMemForBuffers(void **ppMemPool, ulong bufNum, ulong memSize); \ -+extern void SM_DECL name_prefix##FreeMemForBuffers(void *hMem, ulong memSize, void *pMemPool); \ -+extern dslFrameBuffer * SM_DECL name_prefix##AllocBuffer(void *handle, void *pMem, ulong length); \ -+extern void SM_DECL name_prefix##FreeBuffer(void *handle, dslFrameBuffer *pBuf); \ -+extern ulong SM_DECL name_prefix##2Id(void *handle, dslFrame *pFrame); \ -+extern void * SM_DECL name_prefix##Id2Frame(void *handle, ulong frameId); -+ -+ -+#define DslFrameAssignFunctions( var, name_prefix ) do { \ -+ (var).__DslFrameBufferGetLength = name_prefix##BufferGetLength; \ -+ (var).__DslFrameBufferGetAddress= name_prefix##BufferGetAddress; \ -+ (var).__DslFrameBufferSetLength = name_prefix##BufferSetLength; \ -+ (var).__DslFrameBufferSetAddress= name_prefix##BufferSetAddress; \ -+ \ -+ (var).__DslFrameInit = name_prefix##Init; \ -+ (var).__DslFrameGetLength = name_prefix##GetLength; \ -+ (var).__DslFrameGetBufCnt = name_prefix##GetBufCnt; \ -+ (var).__DslFrameGetFirstBuffer = name_prefix##GetFirstBuffer; \ -+ (var).__DslFrameGetNextBuffer = name_prefix##GetNextBuffer; \ -+ (var).__DslFrameSetNextBuffer = name_prefix##SetNextBuffer; \ -+ (var).__DslFrameGetLastBuffer = name_prefix##GetLastBuffer; \ -+ (var).__DslFrameGetLinkFieldAddress = name_prefix##GetLinkFieldAddress; \ -+ (var).__DslFrameGetFrameAddressFromLink = name_prefix##GetFrameAddressFromLink; \ -+ \ -+ (var).__DslFrameGetOobInfo = name_prefix##GetOobInfo; \ -+ (var).__DslFrameSetOobInfo = name_prefix##SetOobInfo; \ -+ \ -+ (var).__DslFrameEnqueBufferAtBack = name_prefix##EnqueBufferAtBack; \ -+ (var).__DslFrameEnqueFrameAtBack = name_prefix##EnqueFrameAtBack; \ -+ (var).__DslFrameEnqueBufferAtFront= name_prefix##EnqueBufferAtFront; \ -+ (var).__DslFrameEnqueFrameAtFront = name_prefix##EnqueFrameAtFront; \ -+ (var).__DslFrameDequeBuffer = name_prefix##DequeBuffer; \ -+ \ -+ (var).__DslFrameAllocMemForFrames = name_prefix##AllocMemForFrames; \ -+ (var).__DslFrameFreeMemForFrames = name_prefix##FreeMemForFrames; \ -+ (var).__DslFrameAllocFrame = name_prefix##AllocFrame; \ -+ (var).__DslFrameFreeFrame = name_prefix##FreeFrame; \ -+ (var).__DslFrameAllocMemForBuffers= name_prefix##AllocMemForBuffers; \ -+ (var).__DslFrameFreeMemForBuffers = name_prefix##FreeMemForBuffers; \ -+ (var).__DslFrameAllocBuffer = name_prefix##AllocBuffer; \ -+ (var).__DslFrameFreeBuffer = name_prefix##FreeBuffer; \ -+ \ -+ (var).__DslFrame2Id = name_prefix##2Id; \ -+ (var).__DslFrameId2Frame = name_prefix##Id2Frame; \ -+} while (0) -+ -+typedef struct -+ { -+ Boolean febe_I; -+ Boolean fecc_I; -+ Boolean los, rdi; -+ Boolean ncd_I; -+ Boolean hec_I; -+#ifdef G992P3 -+ Boolean lpr; -+#endif -+ -+#ifdef G992P1_NEWFRAME -+ -+ Boolean febe_F; -+ Boolean fecc_F; -+ Boolean ncd_F; -+ Boolean hec_F; -+ -+#endif -+ } G992MonitorParams; -+ -+typedef struct -+ { -+ ushort K; -+ uchar S, R; -+ uchar D; -+#ifdef G992P3 -+ uchar T, SEQ; -+#endif -+ directionType direction; -+ -+#ifdef G992P1_NEWFRAME -+ -+ ushort N; -+ ushort NF; -+ uchar RSF; -+ -+ uchar AS0BF, AS1BF, AS2BF, AS3BF, AEXAF; -+ ushort AS0BI; -+ uchar AS1BI, AS2BI, AS3BI, AEXAI; -+ -+ uchar LS0CF, LS1BF, LS2BF, LEXLF; -+ uchar LS0CI, LS1BI, LS2BI, LEXLI; -+ -+ uchar mergedModeEnabled; -+ -+#endif -+ -+ } G992CodingParams; -+ -+typedef struct -+ { -+ uchar Nlp; -+ uchar Nbc; -+ uchar MSGlp; -+ ushort MSGc; -+ -+ ulong L; -+ ushort M; -+ ushort T; -+ ushort D; -+ ushort R; -+ ushort B; -+ } G992p3CodingParams; -+ -+/* Power Management Message definitions (used in command and status) */ -+ -+typedef struct -+ { -+ long msgType; -+ union -+ { -+ long value; -+ struct -+ { -+ long msgLen; -+ void *msgData; -+ } msg; -+ } param; -+ } dslPwrMessage; -+ -+/* Power Management commands and responses */ -+ -+#define kPwrSimpleRequest 1 -+#define kPwrL2Request 2 -+#define kPwrL2TrimRequest 3 -+ -+#define kPwrGrant 0x80 -+#define kPwrReject 0x81 -+#define kPwrL2Grant 0x82 -+#define kPwrL2Reject 0x83 -+#define kPwrL2TrimGrant 0x84 -+#define kPwrL2TrimReject 0x85 -+#define kPwrL2Grant2p 0x86 -+ -+#define kPwrBusy 0x01 -+#define kPwrInvalid 0x02 -+#define kPwrNotDesired 0x03 -+#define kPwrInfeasibleParam 0x04 -+ -+/* Power Management reason codes */ -+ -+/* OLR definitions (used in command and status) */ -+ -+typedef struct -+ { -+ ushort msgType; -+ ushort nCarrs; -+ ushort L[4]; -+ uchar B[4]; -+ void *carrParamPtr; -+ } dslOLRMessage; -+ -+typedef struct -+ { -+ uchar ind; -+ uchar gain; -+ uchar gb; -+ } dslOLRCarrParam; -+ -+typedef struct -+ { -+ ushort ind; -+ uchar gain; -+ uchar gb; -+ } dslOLRCarrParam2p; -+ -+/* OLR messages */ -+ -+#define kOLRRequestType1 1 -+#define kOLRRequestType2 2 -+#define kOLRRequestType3 3 -+#define kOLRRequestType4 4 -+#define kOLRRequestType5 5 -+#define kOLRRequestType6 6 -+ -+#define kOLRDeferType1 0x81 -+#define kOLRRejectType2 0x82 -+#define kOLRRejectType3 0x83 -+ -+/* OLR reason codes */ -+ -+#define kOLRBusy 1 -+#define kOLRInvalidParam 2 -+#define kOLRNotEnabled 3 -+#define kOLRNotSupported 4 -+ -+/* common EOC definitions */ -+#define kG992EocStuffingByte 0x0C -+ -+/* showtime monitor counters */ -+#define kG992ShowtimeRSCodewordsRcved 0 /* number of Reed-Solomon codewords received */ -+#define kG992ShowtimeRSCodewordsRcvedOK 1 /* number of Reed-Solomon codewords received with all symdromes zero */ -+#define kG992ShowtimeRSCodewordsRcvedCorrectable 2 /* number of Reed-Solomon codewords received with correctable errors */ -+#define kG992ShowtimeRSCodewordsRcvedUncorrectable 3 /* number of Reed-Solomon codewords received with un-correctable errors */ -+#define kG992ShowtimeSuperFramesRcvd 4 /* number of super frames received */ -+#define kG992ShowtimeSuperFramesRcvdWrong 5 /* number of super frames received with CRC error */ -+#define kG992ShowtimeLastUncorrectableRSCount 6 /* last recorded value for kG992ShowtimeRSCodewordsRcvedUncorrectable */ -+#define kG992ShowtimeLastWrongSuperFrameCount 7 /* last recorded value for kG992ShowtimeSuperFramesRcvdWrong */ -+#define kG992ShowtimeNumOfShortResync 8 /* number of short interrupt recoveries by FEQ */ -+ -+#define kG992ShowtimeNumOfFEBE 9 /* number of other side superframe errors */ -+#define kG992ShowtimeNumOfFECC 10 /* number of other side superframe FEC errors */ -+#define kG992ShowtimeNumOfFHEC 11 /* number of far-end ATM header CRC errors */ -+#define kG992ShowtimeNumOfFOCD 12 /* number of far-end OCD events */ -+#define kG992ShowtimeNumOfFLCD 13 /* number of far-end LCD events */ -+#define kG992ShowtimeNumOfHEC 14 /* number of ATM header CRC errors */ -+#define kG992ShowtimeNumOfOCD 15 /* number of OCD events */ -+#define kG992ShowtimeNumOfLCD 16 /* number of LCD events */ -+ -+#define kG992ShowtimeNumOfMonitorCounters (kG992ShowtimeNumOfLCD+1) /* always last number + 1 */ -+#define kG992ShowtimeMonitorReportNumber 9 -+ -+#define kG992ShowtimeLCDNumShift 1 -+#define kG992ShowtimeLCDFlag 1 -+ -+typedef int (SM_DECL *dslFrameHandlerType) (void *gDslVars, void *pVc, ulong mid, dslFrame *); -+ -+typedef void* (SM_DECL *dslHeaderHandlerType) (void *gDslVars, ulong hdr, uchar hdrHec); -+typedef void* (SM_DECL *dslTxFrameBufferHandlerType) (void *gDslVars, int*, void*); -+typedef void* (SM_DECL *dslRxFrameBufferHandlerType) (void *gDslVars, int, void*); -+ -+typedef void* (SM_DECL *dslVcAllocateHandlerType) (void *gDslVars, void *); -+typedef void (SM_DECL *dslVcFreeHandlerType) (void *gDslVars, void *); -+typedef Boolean (SM_DECL *dslVcActivateHandlerType) (void *gDslVars, void *); -+typedef void (SM_DECL *dslVcDeactivateHandlerType) (void *gDslVars, void *); -+typedef Boolean (SM_DECL *dslVcConfigureHandlerType) (void *gDslVars, void *pVc, ulong mid, void *); -+ -+typedef ulong (SM_DECL *dslLinkVc2IdHandlerType) (void *gDslVars, void *); -+typedef void* (SM_DECL *dslLinkVcId2VcHandlerType) (void *gDslVars, ulong); -+typedef void* (SM_DECL *dslGetFramePoolHandlerType) (void *gDslVars); -+ -+typedef void (SM_DECL *dslLinkCloseHandlerType) (void *gDslVars); -+typedef int (SM_DECL *dslTxDataHandlerType)(void *gDslVars, int, int, uchar*, G992MonitorParams*); -+typedef int (SM_DECL *dslRxDataHandlerType)(void *gDslVars, int, uchar*, G992MonitorParams*); -+ -+typedef void (SM_DECL *dslLinkStatusHandler) (void *gDslVars, ulong statusCode, ...); -+ -+typedef Boolean (SM_DECL *dslPhyInitType) ( -+ void *gDslVars, -+ bitMap setupMap, -+ dslHeaderHandlerType rxCellHeaderHandlerPtr, -+ dslRxFrameBufferHandlerType rxFrameHandlerPtr, -+ dslTxFrameBufferHandlerType txFrameHandlerPtr, -+ atmStatusHandler statusHandlerPtr); -+ -+struct _dslFramerBufDesc; -+ -+typedef Boolean (SM_DECL *dslFramerDataGetPtrHandlerType) (void *gDslVars, struct _dslFramerBufDesc *pBufDesc); -+typedef void (SM_DECL *dslFramerDataDoneHandlerType) (void *gDslVars, struct _dslFramerBufDesc *pBufDesc); -+ -+typedef void (SM_DECL *dslDriverCallbackType) (void *gDslVars); -+ -+#ifdef DSL_PACKET -+ -+typedef struct -+ { -+ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler; -+ dslFramerDataDoneHandlerType rxDataDoneHandler; -+ dslFramerDataGetPtrHandlerType txDataGetPtrHandler; -+ dslFramerDataDoneHandlerType txDataDoneHandler; -+ } dslPacketPhyFunctions; -+ -+typedef Boolean (SM_DECL *dslPacketPhyInitType) ( -+ void *gDslVars, -+ bitMap setupMap, -+ dslPacketPhyFunctions dslPhyFunctions, -+ dslLinkStatusHandler statusHandlerPtr); -+ -+ -+#endif /* DSL_PACKET */ -+ -+ -+typedef int dslDirectionType; -+typedef bitMap dslModulationType; -+typedef bitMap dslLinkLayerType; -+ -+/* -+** -+** Log data codes -+** -+*/ -+ -+#define kDslEyeData eyeData -+ -+#define kDslLogComplete (inputSignalData - 1) -+#define kDslLogInputData inputSignalData -+#define kDslLogInputData1 (inputSignalData + 1) -+#define kDslLogInputData2 (inputSignalData + 2) -+#define kDslLogInputData3 (inputSignalData + 3) -+ -+/* -+** -+** Status codes -+** -+*/ -+ -+typedef long dslStatusCode; -+#define kFirstDslStatusCode 256 -+#define kDslError (kFirstDslStatusCode + 0) -+#define kAtmStatus (kFirstDslStatusCode + 1) -+#define kDslTrainingStatus (kFirstDslStatusCode + 2) -+#define kDslConnectInfoStatus (kFirstDslStatusCode + 3) -+#define kDslEscapeToG994p1Status (kFirstDslStatusCode + 4) -+#define kDslFrameStatus (kFirstDslStatusCode + 5) -+#define kDslReceivedEocCommand (kFirstDslStatusCode + 6) -+#define kDslSendEocCommandDone (kFirstDslStatusCode + 7) -+#define kDslSendEocCommandFailed (kFirstDslStatusCode + 8) -+#define kDslWriteRemoteRegisterDone (kFirstDslStatusCode + 9) -+#define kDslReadRemoteRegisterDone (kFirstDslStatusCode + 10) -+#define kDslExternalError (kFirstDslStatusCode + 11) -+#define kDslDspControlStatus (kFirstDslStatusCode + 12) -+#define kDslATUHardwareAGCRequest (kFirstDslStatusCode + 13) -+#define kDslPacketStatus (kFirstDslStatusCode + 14) -+#define kDslG997Status (kFirstDslStatusCode + 15) -+#define kDslPrintfStatus (kFirstDslStatusCode + 16) -+#define kDslPrintfStatus1 (kFirstDslStatusCode + 17) -+#define kDslExceptionStatus (kFirstDslStatusCode + 18) -+#define kDslPingResponse (kFirstDslStatusCode + 19) -+#define kDslShowtimeSNRMarginInfo (kFirstDslStatusCode + 20) -+#define kDslGetOemParameter (kFirstDslStatusCode + 21) -+#define kDslOemDataAddrStatus (kFirstDslStatusCode + 22) -+#define kDslDataAvailStatus (kFirstDslStatusCode + 23) -+/* #define kDslAtuChangeTxFilterRequest (kFirstDslStatusCode + 24) */ -+#define kDslTestPllPhaseResult (kFirstDslStatusCode + 25) -+#ifdef BCM6348_SRC -+#define kDslHardwareAGCSetPga1 (kFirstDslStatusCode + 26) -+#define kDslHardwareAGCDecPga1 (kFirstDslStatusCode + 27) -+#define kDslHardwareAGCIncPga1 (kFirstDslStatusCode + 28) -+#define kDslHardwareAGCSetPga2Delta (kFirstDslStatusCode + 29) -+#endif -+#define kDslOLRRequestStatus (kFirstDslStatusCode + 30) -+#define kDslOLRResponseStatus (kFirstDslStatusCode + 31) -+#define kDslOLRBitGainUpdateStatus (kFirstDslStatusCode + 32) -+#define kDslPwrMgrStatus (kFirstDslStatusCode + 33) -+#define kDslEscapeToT1p413Status (kFirstDslStatusCode + 34) -+#ifdef BCM6348_SRC -+#define kDslHardwareAGCSetPga2 (kFirstDslStatusCode + 35) -+#define kDslHardwareGetRcvAGC (kFirstDslStatusCode + 36) -+#endif -+#define kDslUpdateXmtReadPtr (kFirstDslStatusCode + 37) -+#define kDslHardwareSetRcvAGC (kFirstDslStatusCode + 38) -+#ifdef BCM6348_SRC -+#define kDslSetDigUsPwrCutback (kFirstDslStatusCode + 39) -+#endif -+ -+#define kClientSideInitiation 0 -+#define kClientSideRespond 1 -+#define kCentralSideInitiation 2 -+#define kCentralSideRespond 3 -+ -+/* OEM parameter ID definition */ -+ -+#define kDslOemG994VendorId 1 -+#define kDslOemG994XmtNSInfo 2 -+#define kDslOemG994RcvNSInfo 3 -+#define kDslOemEocVendorId 4 -+#define kDslOemEocVersion 5 -+#define kDslOemEocSerNum 6 -+#define kDslOemT1413VendorId 7 -+#define kDslOemT1413EocVendorId 8 -+ -+typedef long dslErrorCode; -+ -+typedef long atmStatusCode; -+typedef long dslFramerStatusCode; -+ -+typedef long atmErrorCode; -+ -+typedef long dslTrainingStatusCode; -+ -+#define kDslStartedG994p1 0 -+#define kDslStartedT1p413HS 1 -+ -+/* reserved for G.994.1: 1 ~ 8 */ -+ -+#define kDslG994p1MessageDet 100 -+#define kDslG994p1ToneDet 101 -+#define kDslG994p1RToneDet 102 -+#define kDslG994p1FlagDet 103 -+#define kDslG994p1GalfDet 104 -+#define kDslG994p1ErrorFrameDet 105 -+#define kDslG994p1BadFrameDet 106 -+#define kDslG994p1SilenceDet 107 -+#define kDslG994p1RcvTimeout 108 -+#define kDslG994p1XmtFinished 109 -+#define kDslG994p1ReturntoStartup 110 -+#define kDslG994p1InitiateCleardown 111 -+#define kDslG994p1StartupFinished 112 -+#define kDslG994p1RcvNonStandardInfo 113 -+#define kDslG994p1XmtNonStandardInfo 114 -+ -+#define kG994p1MaxNonstdMessageLength 64 -+ -+#define kDslFinishedT1p413 1100 -+#define kDslT1p413DetectedCTone 1101 -+#define kDslT1p413DetectedCAct 1102 -+#define kDslT1p413DetectedCReveille 1103 -+#define kDslT1p413DetectedRActReq 1104 -+#define kDslT1p413DetectedRQuiet1 1105 -+#define kDslT1p413DetectedRAct 1106 -+#define kDslT1p413TimeoutCReveille 1107 -+#define kDslT1p413ReturntoStartup 1108 -+ -+#define kDslG994p1Timeout 8 -+#define kDslFinishedG994p1 9 -+#define kDslStartedG992p2Training 10 -+#define kDslG992p2DetectedPilotSymbol 11 -+#define kDslG992p2DetectedReverbSymbol 12 -+#define kDslG992p2TEQCalculationDone 13 -+#define kDslG992p2TrainingFEQ 14 -+#define kDslG992p2Phase3Started 15 -+#define kDslG992p2ReceivedRates1 16 -+#define kDslG992p2ReceivedMsg1 17 -+#define kDslG992p2Phase4Started 18 -+#define kDslG992p2ReceivedRatesRA 19 -+#define kDslG992p2ReceivedMsgRA 20 -+#define kDslG992p2ReceivedRates2 21 -+#define kDslG992p2ReceivedMsg2 22 -+#define kDslG992p2ReceivedBitGainTable 23 -+#define kDslG992p2TxShowtimeActive 24 -+#define kDslG992p2RxShowtimeActive 25 -+#define kDslG992p2TxAocMessage 26 -+#define kDslG992p2RxAocMessage 27 -+#define kDslG992p2TxEocMessage 28 -+#define kDslG992p2RxEocMessage 29 -+#define kDslFinishedG992p2Training 30 -+#define kDslRecoveredFromImpulseNoise 31 -+#define kDslG992Timeout 32 -+#define kDslT1p413Isu1SglByteSymDetected 33 /* detected T1.413 Issue 1 single byte per symbol mode */ -+#define kDslG992RxPrefixOnInAFewSymbols 34 -+#define kDslG992TxPrefixOnInAFewSymbols 35 -+#define kDslAnnexCXmtCPilot1Starting 36 -+#define kDslXmtToRcvPathDelay 37 -+#define kDslFeaturesUnsupported 38 -+#define kDslG992RcvMsgCrcError 39 -+#define kDslAnnexCDetectedStartHyperframe 40 -+ -+#define kDslG992AnnexCTimeoutCPilot1Detection 41 -+#define kDslG992AnnexCTimeoutCReverb1Detection 42 -+#define kDslG992AnnexCTimeoutECTraining 43 -+#define kDslG992AnnexCTimeoutHyperframeDetector 44 -+#define kDslG992AnnexCTimeoutSendRSegue2 45 -+#define kDslG992AnnexCTimeoutDetectCSegue1 46 -+#define kDslG992AnnexCAlignmentErrDetected 47 -+#define kDslG992AnnexCTimeoutSendRSegueRA 48 -+#define kDslG992AnnexCTimeoutSendRSegue4 49 -+#define kDslG992AnnexCTimeoutCSegue2Detection 50 -+#define kDslG992AnnexCTimeoutCSegue3Detection 51 -+/* Progress report for fast retrain */ -+ -+#define kG994p1EventToneDetected 54 -+#define kDslG992p2RcvVerifiedBitAndGain 55 -+#define kDslG992p2ProfileChannelResponseCalc 56 -+#define kDslG992AnnexCTotalFEXTBits 57 -+#define kDslG992AnnexCTotalNEXTBits 58 -+#define kDslG992AnnexCTotalFEXTCarrs 59 -+#define kDslG992AnnexCTotalNEXTCarrs 60 -+ -+#define kDslG992p3ReceivedMsgFmt 61 -+#define kDslG992p3ReceivedMsgPcb 62 -+ -+#define kDslG992p3AnnexLMode 63 -+ -+/* performance monitoring report */ -+ -+#define kG992DataRcvDetectFastRSCorrection 70 -+#define kG992DataRcvDetectInterleaveRSCorrection 71 -+#define kG992DataRcvDetectFastCRCError 72 -+#define kG992DataRcvDetectInterleaveCRCError 73 -+#define kG992DataRcvDetectFastRSError 74 -+#define kG992DataRcvDetectInterleaveRSError 75 -+#define kG992DataRcvDetectLOS 76 -+#define kG992DecoderDetectRDI 77 -+#define kG992DataRcvDetectLOSRecovery 78 -+#define kG992AtmDetectHEC 79 -+#define kG992AtmDetectOCD 180 -+#define kG992AtmDetectCD 181 -+#define kG992DecoderDetectRemoteLOS 182 -+#define kG992DecoderDetectRemoteLOSRecovery 183 -+#define kG992DecoderDetectRemoteRDI 184 -+#define kG992DecoderDetectRemoteRDIRecovery 185 -+#define kG992RcvDetectSyncSymbolOffset 186 -+#define kG992Upstream2xIfftDisabled 187 -+#if defined(G992P5) -+#define kDslG992RunAnnexaP3ModeInAnnexaP5 188 /* run Annex C mode in Annex I compiled codes */ -+#else -+#define kDslG992RunAnnexCModeInAnnexI 188 /* run Annex C mode in Annex I compiled codes */ -+#endif -+ -+/* OLR PHY status */ -+ -+#define kG992EventSynchSymbolDetected 189 -+#define kG992EventReverseSynchSymbolDetected 190 -+#define kG992EventL2CReverbSymbolDetected 191 -+#define kG992EventL2CSegueSymbolDetected 192 -+ -+/* ANNEX_M */ -+#define kG992EnableAnnexM 191 -+ -+#define kDslAtuChangeTxFilterRequest 192 -+ -+/* detailed error messages reports */ -+ -+#define kDslG992XmtRReverbRAOver4000 80 -+#define kDslG992XmtRReverb5Over4000 81 -+#define kDslG992RcvCSegue2Failed 82 -+#define kDslG992RcvCSegueRAFailed 83 -+#define kDslG992RcvCSegue3Failed 84 -+#define kDslG992RcvShowtimeStartedTooLate 85 -+#define kDslG992XmtRReverb3Over4000 86 -+#define kDslG992RcvFailDetCSegue1InWindow 87 -+#define kDslG992RcvCPilot1Failed 88 -+#define kDslG992RcvCReverb1Failed 89 -+#define kG992ControlAllRateOptionsFailedErr 90 -+#define kG992ControlInvalidRateOptionErr 91 -+#define kDslG992XmtInvalidXmtDErr 92 -+#define kDslG992BitAndGainCalcFailed 93 -+#define kDslG992BitAndGainVerifyFailed 94 -+ -+#define kDslT1p413RetrainToUseCorrectRAck 95 -+#define kDslUseAlternateTxFilter 96 -+#define kDslT1p413RetrainToUseCorrectIFFT 97 -+ -+typedef long dslConnectInfoStatusCode; -+#define kG992p2XmtToneOrderingInfo 0 -+#define kG992p2RcvToneOrderingInfo 1 -+#define kG992p2XmtCodingParamsInfo 2 -+#define kG992p2RcvCodingParamsInfo 3 -+#define kG992p2TrainingRcvCarrEdgeInfo 4 -+#define kG992ShowtimeMonitoringStatus 5 -+#define kG992MessageExchangeRcvInfo 6 -+#define kG992MessageExchangeXmtInfo 7 -+#define kG994MessageExchangeRcvInfo 8 -+#define kG994MessageExchangeXmtInfo 9 -+ -+#define kDslATURClockErrorInfo 10 -+#define kDslATURcvPowerInfo 11 -+#define kDslATUAvgLoopAttenuationInfo 12 -+#define kDslHWTimeTrackingResetClockError 13 -+#define kDslHWTimeTrackingClockTweak 14 -+#define kDslATUHardwareAGCObtained 15 -+#define kDslTEQCoefInfo 16 -+#define kDslRcvCarrierSNRInfo 17 -+#define kDslMaxReceivableBitRateInfo 18 -+#define kDslHWSetDigitalEcUpdateMode 19 -+#define kDslHWEnableDigitalECUpdate 20 -+#define kDslHWDisableDigitalECUpdate 21 -+#define kDslHWEnableDigitalEC 22 -+#define kDslHWSetDigitalEcGainShift 23 -+#define kDslHWSetDigitalEcUpdateShift 24 -+#define kDslRcvPsdInfo 25 -+#define kDslHWdcOffsetInfo 26 -+#define kG994SelectedG994p1CarrierIndex 27 -+#define kDslSelectedTimingTone 28 -+ -+#define kDslHWEnableAnalogECUpdate kDslHWSetDigitalEcUpdateMode -+#define kDslHWEnableAnalogEC kDslHWDisableDigitalECUpdate -+ -+#define kG992AocMessageExchangeRcvInfo 29 -+#define kG992AocMessageExchangeXmtInfo 30 -+#define kG992AocBitswapTxStarted 31 -+#define kG992AocBitswapRxStarted 32 -+#define kG992AocBitswapTxCompleted 33 -+#define kG992AocBitswapRxCompleted 34 -+#define kDslChannelResponseLog 35 -+#define kDslChannelResponseLinear 36 -+#define kDslChannelQuietLineNoise 37 -+ -+#define kDslATUCXmtPowerCutbackInfo 40 -+#define kDslATURXmtPowerCutbackInfo 41 -+#define kDslATUCXmtPowerInfo 42 -+#define kDslATURXmtPowerInfo 43 -+ -+#define kDslFramingModeInfo 50 -+#define kDslG992VendorID 51 -+ -+#ifdef BCM6348_SRC -+#define kDslHWSetRcvFir2OutputScale 52 -+#endif -+ -+#define kDslSignalAttenuation 53 -+#define kDslAttainableNetDataRate 54 -+#define kDslHLinScale 55 -+ -+#define kG992p3XmtCodingParamsInfo 60 -+#define kG992p3RcvCodingParamsInfo 61 -+#define kG992p3PwrStateInfo 62 -+#define kG992PilotToneInfo 63 -+ -+#define kDslSetPilotEyeDisplay 64 -+ -+#define kDslAturHwAgcResolutionMask (0xFFFFFFF8) -+#define kDslAturHwAgcMinGain ((-12)<<4) -+#ifndef BCM6348_SRC -+#define kDslAturHwAgcMaxGain (30<<4) -+#else -+#define kDslAturHwAgcMaxGain (36<<4) -+#endif -+ -+#define kDslFrameStatusSend 1 -+#define kDslFrameStatusSendComplete 2 -+#define kDslFrameStatusRcv 3 -+#define kDslFrameStatusReturn 4 -+ -+typedef struct _dslFramerStatus -+ { -+ dslFramerStatusCode code; -+ union -+ { -+ long value; -+ dslErrorCode error; -+ struct -+ { -+ long length; -+ uchar *framePtr; -+ } frame; -+ struct -+ { -+ long nRxFrameTotal; -+ long nRxFrameError; -+ long nTxFrameTotal; -+ } statistic; -+ } param; -+ } dslFramerStatus; -+ -+typedef struct -+ { -+ dslStatusCode code; -+ union -+ { -+ long value; -+ dslErrorCode error; -+ struct -+ { -+ atmStatusCode code; -+ union -+ { -+ long value; -+ dslErrorCode error; -+ struct -+ { -+ long vci; -+ long mid; -+ long aalType; -+ long length; -+ uchar *framePtr; -+ } frame; -+ struct -+ { -+ long nFrames; -+ long nFrameErrors; -+ } statistic; -+ struct -+ { -+ long vcId; -+ long vci; -+ long aalType; -+ ulong fwdPeakCellTime; -+ ulong backPeakCellTime; -+ } vcInfo; -+ struct -+ { -+ long cellHdr; -+ long oamCmd; -+ } oamInfo; -+ struct -+ { -+ void *pVc; -+ char *pHdr; -+ void *cellHdr; -+ void *cellData; -+ } cellInfo; -+ struct -+ { -+ long totalBits; -+ long errBits; -+ } bertInfo; -+ } param; -+ } atmStatus; -+#ifdef DSL_PACKET -+ dslFramerStatus dslPacketStatus; -+#endif -+#ifdef G997_1_FRAMER -+ dslFramerStatus g997Status; -+#endif -+ struct -+ { -+ dslTrainingStatusCode code; -+ long value; -+ } dslTrainingInfo; -+ struct -+ { -+ dslConnectInfoStatusCode code; -+ long value; -+ void *buffPtr; -+ } dslConnectInfo; -+ struct -+ { -+ long maxMarginCarrier; -+ long maxSNRMargin; -+ long minMarginCarrier; -+ long minSNRMargin; -+ long avgSNRMargin; -+ long nCarriers; -+ void *buffPtr; -+ } dslShowtimeSNRMarginInfo; -+ struct -+ { -+ long code; -+ long vcId; -+ long timeStamp; -+ } dslFrameInfo; -+#ifdef G997_1 -+ struct -+ { -+ long msgId; -+ long msgType; -+ char *dataPtr; -+ } dslClearEocMsg; -+#endif -+ struct -+ { -+ char *fmt; -+ long argNum; -+ void *argPtr; -+ } dslPrintfMsg; -+ struct -+ { -+ ulong nBits; -+ ulong nBlocks; -+ ulong nBitErrors; -+ ulong nBlockErrors; -+ -+ ulong nAudioBits; -+ ulong nAudioBlocks; -+ ulong nAudioSyncErrors; -+ ulong nAudioBlockErrors; -+ } testResults; -+ struct -+ { -+ ulong code; -+ uchar *valuePtr; -+ ulong length; -+ } dslDataRegister; -+ struct -+ { -+ ulong code; -+ char *desc; -+ } dslExternalError; -+ struct -+ { -+ ulong numberOfCalls; -+ ulong txSignalChecksum; -+ ulong rxSignalChecksum; -+ ulong eyeDataChecksum; -+ } checksums; -+ struct -+ { -+ int sp; -+ int argc; -+ int *argv; -+ int *stackPtr; -+ int stackLen; -+ } dslException; -+ struct -+ { -+ ulong paramId; -+ void *dataPtr; -+ ulong dataLen; -+ } dslOemParameter; -+ struct -+ { -+ void *dataPtr; -+ ulong dataLen; -+ } dslDataAvail; -+ dslOLRMessage dslOLRRequest; -+ dslPwrMessage dslPwrMsg; -+ } param; -+ } dslStatusStruct; -+ -+typedef void (SM_DECL *dslStatusHandlerType) (void *gDslVars, dslStatusStruct*); -+ -+ -+/* -+** -+** Command codes -+** -+*/ -+ -+typedef long dslCommandCode; -+#define kFirstDslCommandCode 256 -+#define kDslIdleCmd (kFirstDslCommandCode + 0) -+#define kDslIdleRcvCmd (kFirstDslCommandCode + 1) -+#define kDslIdleXmtCmd (kFirstDslCommandCode + 2) -+#define kDslStartPhysicalLayerCmd (kFirstDslCommandCode + 3) -+#define kDslStartRetrainCmd (kFirstDslCommandCode + 4) -+#define kDslSetFrameFunctions (kFirstDslCommandCode + 5) -+#define kDslSendEocCommand (kFirstDslCommandCode + 6) -+#define kDslWriteRemoteRegister (kFirstDslCommandCode + 7) -+#define kDslReadRemoteRegister (kFirstDslCommandCode + 8) -+#define kDslWriteLocalRegister (kFirstDslCommandCode + 9) -+#define kDslReadLocalRegister (kFirstDslCommandCode + 10) -+#define kDslStoreHardwareAGCCmd (kFirstDslCommandCode + 11) -+#define kDslSetCommandHandlerCmd (kFirstDslCommandCode + 12) -+#define kSetLinkLayerStatusHandlerCmd (kFirstDslCommandCode + 13) -+#define kDslSetG997Cmd (kFirstDslCommandCode + 14) -+#define kDslLoopbackCmd (kFirstDslCommandCode + 15) -+#define kDslDiagSetupCmd (kFirstDslCommandCode + 16) -+#define kDslSetDriverCallbackCmd (kFirstDslCommandCode + 17) -+#define kDslDiagStopLogCmd (kFirstDslCommandCode + 18) -+#define kDslDiagStartBERT (kFirstDslCommandCode + 19) -+#define kDslDiagStopBERT (kFirstDslCommandCode + 20) -+#define kDslPingCmd (kFirstDslCommandCode + 21) -+#define kDslDyingGaspCmd (kFirstDslCommandCode + 22) -+#define kDslTestCmd (kFirstDslCommandCode + 23) -+#define kDslFilterSNRMarginCmd (kFirstDslCommandCode + 24) -+#define kDslAtmVcMapTableChanged (kFirstDslCommandCode + 25) -+#define kDslGetOemDataAddrCmd (kFirstDslCommandCode + 26) -+#define kDslAtmReportHEC (kFirstDslCommandCode + 27) -+#define kDslAtmReportCD (kFirstDslCommandCode + 28) -+#define kDslSetXmtGainCmd (kFirstDslCommandCode + 29) -+#define kDslSetStatusBufferCmd (kFirstDslCommandCode + 30) -+#define kDslAfeTestCmd (kFirstDslCommandCode + 31) -+#define kDslI432ResetCmd (kFirstDslCommandCode + 32) -+#define kDslSetRcvGainCmd (kFirstDslCommandCode + 33) -+#define kDslBypassRcvHpfCmd (kFirstDslCommandCode + 34) -+#define kDslWriteAfeRegCmd (kFirstDslCommandCode + 35) -+#define kDslReadAfeRegCmd (kFirstDslCommandCode + 36) -+#define kDslOLRRequestCmd (kFirstDslCommandCode + 37) -+#define kDslOLRResponseCmd (kFirstDslCommandCode + 38) -+#define kDslI432SetScrambleCmd (kFirstDslCommandCode + 39) -+#define kDslPwrMgrCmd (kFirstDslCommandCode + 40) -+#define kDslAtmGfcMappingCmd (kFirstDslCommandCode + 41) -+ -+#ifdef BCM6348_SRC -+#define kDslEnablePwmSyncClk (kFirstDslCommandCode + 42) -+#define kDslSetPwmSyncClkFreq (kFirstDslCommandCode + 43) -+#endif -+ -+#define kG994p1Duplex 1 -+#define kG994p1HalfDuplex 2 -+ -+/* Eoc Messages from ATU-C to ATU-R */ -+#define kDslEocHoldStateCmd 1 -+#define kDslEocReturnToNormalCmd 2 -+#define kDslEocPerformSelfTestCmd 3 -+#define kDslEocRequestCorruptCRCCmd 4 -+#define kDslEocRequestEndCorruptCRCCmd 5 -+#define kDslEocNotifyCorruptCRCCmd 6 -+#define kDslEocNotifyEndCorruptCRCCmd 7 -+#define kDslEocRequestTestParametersUpdateCmd 8 -+#define kDslEocGrantPowerDownCmd 9 -+#define kDslEocRejectPowerDownCmd 10 -+ -+/* Eoc Messages from ATU-R to ATU-C */ -+#define kDslEocRequestPowerDownCmd 11 -+#define kDslEocDyingGaspCmd 12 -+ -+/* Clear Eoc Messages */ -+#define kDslClearEocFirstCmd 100 -+#define kDslClearEocSendFrame 100 -+#define kDslClearEocSendComplete 101 -+#define kDslClearEocRcvedFrame 102 -+#define kDslClearEocSendComplete2 103 -+ -+#define kDslClearEocMsgLengthMask 0xFFFF -+#define kDslClearEocMsgNumMask 0xFF0000 -+#define kDslClearEocMsgDataVolatileMask 0x1000000 -+#define kDslClearEocMsgDataVolatile kDslClearEocMsgDataVolatileMask -+#define kDslClearEocMsgExtraSendComplete 0x2000000 -+ -+/* ADSL Link Power States */ -+#define kDslPowerFullOn 0 -+#define kDslPowerLow 1 -+#define kDslPowerIdle 3 -+ -+/* ATU-R Data Registers */ -+#define kDslVendorIDRegister 1 -+#define kDslRevisionNumberRegister 2 -+#define kDslSerialNumberRegister 3 -+#define kDslSelfTestResultsRegister 4 -+#define kDslLineAttenuationRegister 5 -+#define kDslSnrMarginRegister 6 -+#define kDslAturConfigurationRegister 7 -+#define kDslLinkStateRegister 8 -+ -+#define kDslVendorIDRegisterLength 8 -+#define kDslRevisionNumberRegisterLength 32 -+#define kDslSerialNumberRegisterLength 32 -+#define kDslSelfTestResultsRegisterLength 1 -+#define kDslLineAttenuationRegisterLength 1 -+#define kDslSnrMarginRegisterLength 1 -+#define kDslAturConfigurationRegisterLength 30 -+#define kDslLinkStateRegisterLength 1 -+ -+/* Dsl Diags setup flags */ -+#define kDslDiagEnableEyeData 1 -+#define kDslDiagEnableLogData 2 -+ -+/* Dsl test commands */ -+typedef long dslTestCmdType; -+#define kDslTestBackToNormal 0 -+#define kDslTestReverb 1 -+#define kDslTestMedley 2 -+#define kDslTestToneSelection 3 -+#define kDslTestNoAutoRetrain 4 -+#define kDslTestMarginTweak 5 -+#define kDslTestEstimatePllPhase 6 -+#define kDslTestReportPllPhaseStatus 7 -+#define kDslTestAfeLoopback 8 -+#define kDslTestL3 9 -+#define kDslTestAdsl2DiagMode 10 -+#define kDslTestRetL0 11 -+ -+/* Xmt gain default setting */ -+#define kDslXmtGainAuto 0x80000000 -+ -+/* Unit (AFE) test commands */ -+#define kDslAfeTestLoadImage 0 -+#define kDslAfeTestPatternSend 1 -+#define kDslAfeTestLoadImageOnly 2 -+#define kDslAfeTestPhyRun 3 -+#define kDslAfeTestLoadBuffer 4 -+ -+typedef struct -+ { -+#if defined(G992P1_ANNEX_I) || defined(G992P5) -+ ushort downstreamMinCarr, downstreamMaxCarr; -+#else -+ uchar downstreamMinCarr, downstreamMaxCarr; -+#endif -+ uchar upstreamMinCarr, upstreamMaxCarr; -+ }carrierInfo; -+ -+#if defined(G992P3) && !defined(BCM6348_SRC) -+#define FAST_TEXT_TYPE -+#else -+#define FAST_TEXT_TYPE FAST_TEXT -+#endif -+ -+#if defined(BCM6348_SRC) -+#define BCM6348_TEMP_MOVE_TO_LMEM -+#else -+#define BCM6348_TEMP_MOVE_TO_LMEM -+#endif -+ -+#ifdef G992P3 -+#define PRINT_DEBUG_INFO -+#else -+#define PRINT_DEBUG_INFO -+#endif -+ -+#ifdef G992P3 -+ -+#define kG992p3MaxSpectBoundsUpSize 16 -+#define kG992p3MaxSpectBoundsDownSize 16 -+ -+/* G.994 definitions */ -+ -+/*** Standard Info SPar2: G.992.3 Annex A Octet 1 ***/ -+ -+#define kG994p1G992p3AnnexASpectrumBoundsUpstream 0x01 -+#define kG994p1G992p3AnnexASpectrumShapingUpstream 0x02 -+#define kG994p1G992p3AnnexASpectrumBoundsDownstream 0x04 -+#define kG994p1G992p3AnnexASpectrumShapingDownstream 0x08 -+#define kG994p1G992p3AnnexATxImageAboveNyquistFreq 0x10 -+#define kG994p1G992p3AnnexLReachExtended 0x20 -+#define kG994p1G992p3AnnexMSubModePSDMasks 0x20 -+ -+#define kG994p1G992p3AnnexLUpNarrowband 0x02 -+#define kG994p1G992p3AnnexLUpWideband 0x01 -+#define kG994p1G992p3AnnexLDownNonoverlap 0x01 -+ -+/*** Standard Info SPar2: G.992.3 Annex A Octet 2 ***/ -+ -+#define kG994p1G992p3AnnexADownOverheadDataRate 0x01 -+#define kG994p1G992p3AnnexAUpOverheadDataRate 0x02 -+#define kG994p1G992p3AnnexAMaxNumberDownTPSTC 0x04 -+#define kG994p1G992p3AnnexAMaxNumberUpTPSTC 0x08 -+ -+/*** Standard Info SPar2: G.992.3 Annex A Octet 3,5,7,9 ***/ -+ -+#define kG994p1G992p3AnnexADownSTM_TPS_TC 0x01 -+#define kG994p1G992p3AnnexAUpSTM_TPS_TC 0x02 -+#define kG994p1G992p3AnnexADownATM_TPS_TC 0x04 -+#define kG994p1G992p3AnnexAUpATM_TPS_TC 0x08 -+#define kG994p1G992p3AnnexADownPTM_TPS_TC 0x10 -+#define kG994p1G992p3AnnexAUpPTM_TPS_TC 0x20 -+ -+/*** Standard Info SPar2: G.992.3 Annex A Octet 4,6,8,10 ***/ -+ -+#define kG994p1G992p3AnnexADownPMS_TC_Latency 0x01 -+#define kG994p1G992p3AnnexAUpPMS_TC_Latency 0x02 -+ -+/*** -+ * TSSI -+ * -+ * TSSI information is specified in 2 parts: subcarrier index, -+ * tssi value, and an indication of whether or no the tone specified -+ * is part of the supported set. -+ * -+ * The subcarrier index information is currently stored in the -+ * dsSubcarrierIndex array defined below. The tssi value are stored -+ * in the dsLog_tss array. -+ * -+ * The subcarrier index information only occupies the lower 12 bits -+ * of the available 16 bits (short type). Therefore, we will pack the -+ * supported set information in bit 15. -+ */ -+#define kG992DsSubCarrierIndexMask (0x0fff) /* AND mask to ectract ds subcarrier index */ -+#define kG992DsSubCarrierSuppSetMask (0x8000) /* AND mask to extract supported set indication */ -+ -+#define G992GetDsSubCarrierIndex(arg) ((arg) & kG992DsSubCarrierIndexMask) -+#define G992GetDsSubCarrierSuppSetIndication(arg) (((arg) & kG992DsSubCarrierSuppSetMask) >> 15) -+ -+/* Caution: Do not change anything in this structure definition, including associated constant */ -+/* This structure definition is used only by the driver and any change impose incompatibility issue in driver */ -+/* The structure following this structure (g992p3PhyDataPumpCapabilities) can be changed in PHY application */ -+ -+typedef struct -+ { -+ Boolean rcvNTREnabled, shortInitEnabled, diagnosticsModeEnabled; -+ -+ char featureSpectrum, featureOverhead; -+ char featureTPS_TC[4], featurePMS_TC[4]; -+ -+ short rcvNOMPSDus, rcvMAXNOMPSDus, rcvMAXNOMATPus; -+ short usSubcarrierIndex[kG992p3MaxSpectBoundsUpSize], -+ usLog_tss[kG992p3MaxSpectBoundsUpSize]; -+ short numUsSubcarrier; -+ short rcvNOMPSDds, rcvMAXNOMPSDds, rcvMAXNOMATPds; -+ short dsSubcarrierIndex[kG992p3MaxSpectBoundsDownSize], -+ dsLog_tss[kG992p3MaxSpectBoundsDownSize]; -+ short numDsSubcarrier; -+ uchar sizeIDFT, fillIFFT; -+ uchar readsl2Upstream, readsl2Downstream; -+ uchar minDownOverheadDataRate, minUpOverheadDataRate; -+ uchar maxDownSTM_TPSTC, maxDownATM_TPSTC, maxDownPTM_TPSTC; -+ uchar maxUpSTM_TPSTC, maxUpATM_TPSTC, maxUpPTM_TPSTC; -+ -+ short minDownSTM_TPS_TC[4], maxDownSTM_TPS_TC[4], -+ minRevDownSTM_TPS_TC[4], maxDelayDownSTM_TPS_TC[4]; -+ uchar maxErrorDownSTM_TPS_TC[4], minINPDownSTM_TPS_TC[4]; -+ short minUpSTM_TPS_TC[4], maxUpSTM_TPS_TC[4], -+ minRevUpSTM_TPS_TC[4], maxDelayUpSTM_TPS_TC[4]; -+ uchar maxErrorUpSTM_TPS_TC[4], minINPUpSTM_TPS_TC[4]; -+ -+ short maxDownPMS_TC_Latency[4], maxUpPMS_TC_Latency[4]; -+ short maxDownR_PMS_TC_Latency[4], maxDownD_PMS_TC_Latency[4]; -+ short maxUpR_PMS_TC_Latency[4], maxUpD_PMS_TC_Latency[4]; -+ -+ short minDownATM_TPS_TC[4], maxDownATM_TPS_TC[4], -+ minRevDownATM_TPS_TC[4], maxDelayDownATM_TPS_TC[4]; -+ uchar maxErrorDownATM_TPS_TC[4], minINPDownATM_TPS_TC[4]; -+ short minUpATM_TPS_TC[4], maxUpATM_TPS_TC[4], -+ minRevUpATM_TPS_TC[4], maxDelayUpATM_TPS_TC[4]; -+ uchar maxErrorUpATM_TPS_TC[4], minINPUpATM_TPS_TC[4]; -+ -+ short minDownPTM_TPS_TC[4], maxDownPTM_TPS_TC[4], -+ minRevDownPTM_TPS_TC[4], maxDelayDownPTM_TPS_TC[4]; -+ uchar maxErrorDownPTM_TPS_TC[4], minINPDownPTM_TPS_TC[4]; -+ short minUpPTM_TPS_TC[4], maxUpPTM_TPS_TC[4], -+ minRevUpPTM_TPS_TC[4], maxDelayUpPTM_TPS_TC[4]; -+ uchar maxErrorUpPTM_TPS_TC[4], minINPUpPTM_TPS_TC[4]; -+ -+ ushort subModePSDMasks; -+ } g992p3DataPumpCapabilities; -+ -+#define kG992p3p5MaxSpectBoundsUpSize 16 -+#define kG992p3p5MaxSpectBoundsDownSize 32 -+ -+typedef struct -+ { -+ Boolean rcvNTREnabled, shortInitEnabled, diagnosticsModeEnabled; -+ -+ char featureSpectrum, featureOverhead; -+ char featureTPS_TC[4], featurePMS_TC[4]; -+ -+ short rcvNOMPSDus, rcvMAXNOMPSDus, rcvMAXNOMATPus; -+ short usSubcarrierIndex[kG992p3p5MaxSpectBoundsUpSize], -+ usLog_tss[kG992p3p5MaxSpectBoundsUpSize]; -+ short numUsSubcarrier; -+ short rcvNOMPSDds, rcvMAXNOMPSDds, rcvMAXNOMATPds; -+ short dsSubcarrierIndex[kG992p3p5MaxSpectBoundsDownSize], -+ dsLog_tss[kG992p3p5MaxSpectBoundsDownSize]; -+ short numDsSubcarrier; -+ uchar sizeIDFT, fillIFFT; -+ uchar readsl2Upstream, readsl2Downstream; -+ uchar minDownOverheadDataRate, minUpOverheadDataRate; -+ uchar maxDownSTM_TPSTC, maxDownATM_TPSTC, maxDownPTM_TPSTC; -+ uchar maxUpSTM_TPSTC, maxUpATM_TPSTC, maxUpPTM_TPSTC; -+ -+ short minDownSTM_TPS_TC[4], maxDownSTM_TPS_TC[4], -+ minRevDownSTM_TPS_TC[4], maxDelayDownSTM_TPS_TC[4]; -+ uchar maxErrorDownSTM_TPS_TC[4], minINPDownSTM_TPS_TC[4]; -+ short minUpSTM_TPS_TC[4], maxUpSTM_TPS_TC[4], -+ minRevUpSTM_TPS_TC[4], maxDelayUpSTM_TPS_TC[4]; -+ uchar maxErrorUpSTM_TPS_TC[4], minINPUpSTM_TPS_TC[4]; -+ -+ short maxDownPMS_TC_Latency[4], maxUpPMS_TC_Latency[4]; -+ short maxDownR_PMS_TC_Latency[4], maxDownD_PMS_TC_Latency[4]; -+ short maxUpR_PMS_TC_Latency[4], maxUpD_PMS_TC_Latency[4]; -+ -+ short minDownATM_TPS_TC[4], maxDownATM_TPS_TC[4], -+ minRevDownATM_TPS_TC[4], maxDelayDownATM_TPS_TC[4]; -+ uchar maxErrorDownATM_TPS_TC[4], minINPDownATM_TPS_TC[4]; -+ short minUpATM_TPS_TC[4], maxUpATM_TPS_TC[4], -+ minRevUpATM_TPS_TC[4], maxDelayUpATM_TPS_TC[4]; -+ uchar maxErrorUpATM_TPS_TC[4], minINPUpATM_TPS_TC[4]; -+ -+ short minDownPTM_TPS_TC[4], maxDownPTM_TPS_TC[4], -+ minRevDownPTM_TPS_TC[4], maxDelayDownPTM_TPS_TC[4]; -+ uchar maxErrorDownPTM_TPS_TC[4], minINPDownPTM_TPS_TC[4]; -+ short minUpPTM_TPS_TC[4], maxUpPTM_TPS_TC[4], -+ minRevUpPTM_TPS_TC[4], maxDelayUpPTM_TPS_TC[4]; -+ uchar maxErrorUpPTM_TPS_TC[4], minINPUpPTM_TPS_TC[4]; -+ -+ ushort subModePSDMasks; -+ } g992p3PhyDataPumpCapabilities; -+#endif -+ -+typedef struct -+ { -+ dslModulationType modulations; -+ bitMap auxFeatures; -+ bitMap features; -+ bitMap demodCapabilities; -+ bitMap demodCapabilities2; -+ ushort noiseMargin; /* Q4 dB */ -+#ifdef G992_ATUC -+ short xmtRSf, xmtRS, xmtS, xmtD; -+ short rcvRSf, rcvRS, rcvS, rcvD; -+#endif -+#ifdef G992P1_ANNEX_A -+ bitMap subChannelInfo; -+ carrierInfo carrierInfoG992p1; -+#endif -+#ifdef G992P1_ANNEX_B -+ bitMap subChannelInfoAnnexB; -+ carrierInfo carrierInfoG992p1AnnexB; -+#endif -+#ifdef G992_ANNEXC -+ bitMap subChannelInfoAnnexC; -+ carrierInfo carrierInfoG992p1AnnexC; -+#endif -+#if defined(G992P1_ANNEX_I) -+ bitMap subChannelInfoAnnexI; -+ carrierInfo carrierInfoG992p1AnnexI; -+#endif -+#ifdef G992P5 -+ bitMap subChannelInfop5; -+ carrierInfo carrierInfoG992p5; -+#endif -+#if defined(G992P2) || (defined(G992P1_ANNEX_A) && defined(G992P1_ANNEX_A_USED_FOR_G992P2)) -+ carrierInfo carrierInfoG992p2; -+#endif -+ ushort maxDataRate; -+ uchar minDataRate; -+#ifdef G992P3 -+ g992p3DataPumpCapabilities *carrierInfoG992p3AnnexA; -+#endif -+#ifdef G992P5 -+ g992p3DataPumpCapabilities *carrierInfoG992p5AnnexA; -+#endif -+ } dslDataPumpCapabilities; -+ -+struct __dslCommandStruct; -+typedef Boolean (*dslCommandHandlerType) (void *gDslVars, struct __dslCommandStruct*); -+typedef struct __dslCommandStruct -+ { -+ dslCommandCode command; -+ union -+ { -+ long value; -+ Boolean flag; -+ struct -+ { -+ dslTestCmdType type; -+ union -+ { -+ struct -+ { -+ ulong xmtStartTone, xmtNumOfTones; -+ ulong rcvStartTone, rcvNumOfTones; -+ uchar *xmtMap, *rcvMap; -+ } toneSelectSpec; -+ struct -+ { -+ long extraPowerRequestQ4dB; -+ long numOfCarriers; -+ char *marginTweakTableQ4dB; -+ } marginTweakSpec; -+ } param; -+ } dslTestSpec; -+ struct -+ { -+ dslDirectionType direction; -+ dslDataPumpCapabilities capabilities; -+ } dslModeSpec; -+ struct -+ { -+ bitMap setup; -+ ulong eyeConstIndex1; -+ ulong eyeConstIndex2; -+ ulong logTime; -+ } dslDiagSpec; -+ struct -+ { -+ void *pBuf; -+ ulong bufSize; -+ } dslStatusBufSpec; -+ struct -+ { -+ ulong type; -+ void *afeParamPtr; -+ ulong afeParamSize; -+ void *imagePtr; -+ ulong imageSize; -+ } dslAfeTestSpec; -+ struct -+ { -+ dslLinkLayerType type; -+ bitMap setup; -+ union -+ { -+ struct -+ { -+ dataRateMap rxDataRate; -+ dataRateMap txDataRate; -+ long rtDelayQ4ms; -+ ulong rxBufNum; -+ ulong rxCellsInBuf; -+ ulong rxPacketNum; -+ dslFrameHandlerType rxIndicateHandlerPtr; -+ dslFrameHandlerType txCompleteHandlerPtr; -+ dslPhyInitType atmPhyInitPtr; -+ } atmLinkSpec; -+ struct -+ { -+ dslHeaderHandlerType rxHeaderHandlerPtr; -+ dslRxFrameBufferHandlerType rxDataHandlerPtr; -+ dslTxFrameBufferHandlerType txHandlerPtr; -+ } atmPhyLinkSpec; -+#ifdef DSL_PACKET -+ struct -+ { -+ ulong rxBufNum; -+ ulong rxBufSize; -+ ulong rxPacketNum; -+ dslFrameHandlerType rxIndicateHandlerPtr; -+ dslFrameHandlerType txCompleteHandlerPtr; -+ dslPacketPhyInitType dslPhyInitPtr; -+ } dslPacketLinkSpec; -+ dslPacketPhyFunctions dslPacketPhyLinkSpec; -+#endif -+ struct -+ { -+ txDataHandlerType txDataHandlerPtr; -+ rxDataHandlerType rxDataHandlerPtr; -+ } nullLinkSpec; -+ } param; -+ } dslLinkLayerSpec; -+#ifdef G997_1 -+#ifdef G997_1_FRAMER -+ struct -+ { -+ bitMap setup; -+ ulong rxBufNum; -+ ulong rxBufSize; -+ ulong rxPacketNum; -+ dslFrameHandlerType rxIndicateHandlerPtr; -+ dslFrameHandlerType txCompleteHandlerPtr; -+ } dslG997Cmd; -+#endif -+ struct -+ { -+ long msgId; -+ long msgType; -+ char *dataPtr; -+ } dslClearEocMsg; -+#endif -+ struct -+ { -+ ulong code; -+ uchar *valuePtr; -+ ulong length; -+ } dslDataRegister; -+ union -+ { -+ dslStatusHandlerType statusHandlerPtr; -+ dslCommandHandlerType commandHandlerPtr; -+ eyeHandlerType eyeHandlerPtr; -+ logHandlerType logHandlerPtr; -+#if defined(DEBUG_DATA_HANDLER) -+ debugDataHandlerType debugDataHandlerPtr; -+#endif -+ dslFrameHandlerType rxIndicateHandlerPtr; -+ dslFrameHandlerType txCompleteHandlerPtr; -+ dslDriverCallbackType driverCallback; -+ } handlerSpec; -+#if !defined(CHIP_SRC) || defined(DSL_FRAME_FUNCTIONS) -+ dslFrameFunctions DslFunctions; -+#endif -+ dslOLRMessage dslOLRRequest; -+ dslPwrMessage dslPwrMsg; -+ } param; -+ } dslCommandStruct; -+ -+ -+ -+ -+typedef struct -+ { -+ dslCommandHandlerType linkCommandHandlerPtr; -+ timerHandlerType linkTimerHandlerPtr; -+ dslLinkCloseHandlerType linkCloseHandlerPtr; -+ -+ dslFrameHandlerType linkSendHandlerPtr; -+ dslFrameHandlerType linkReturnHandlerPtr; -+ -+ dslVcAllocateHandlerType linkVcAllocateHandlerPtr; -+ dslVcFreeHandlerType linkVcFreeHandlerPtr; -+ dslVcActivateHandlerType linkVcActivateHandlerPtr; -+ dslVcDeactivateHandlerType linkVcDeactivateHandlerPtr; -+ dslVcConfigureHandlerType linkVcConfigureHandlerPtr; -+ -+ dslLinkVc2IdHandlerType linkVc2IdHandlerPtr; -+ dslLinkVcId2VcHandlerType linkVcId2VcHandlerPtr; -+ dslGetFramePoolHandlerType linkGetFramePoolHandlerPtr; -+ -+#ifndef ADSLCORE_ONLY -+ dslHeaderHandlerType linkRxCellHeaderHandlerPtr; -+ dslRxFrameBufferHandlerType linkRxCellDataHandlerPtr; -+ dslTxFrameBufferHandlerType linkTxCellHandlerPtr; -+#endif -+ -+ txDataHandlerType linkTxDataHandlerPtr; -+ rxDataHandlerType linkRxDataHandlerPtr; -+ } linkLayerFunctions; -+ -+#ifndef ADSLCORE_ONLY -+ -+#define LinkLayerAssignFunctions( var, name_prefix ) do { \ -+ (var).linkCommandHandlerPtr = name_prefix##CommandHandler; \ -+ (var).linkTimerHandlerPtr = name_prefix##TimerHandler; \ -+ (var).linkCloseHandlerPtr = name_prefix##CloseHandler; \ -+ \ -+ (var).linkSendHandlerPtr = name_prefix##SendFrameHandler; \ -+ (var).linkReturnHandlerPtr = name_prefix##ReturnFrameHandler; \ -+ \ -+ (var).linkVcAllocateHandlerPtr = name_prefix##VcAllocateHandler; \ -+ (var).linkVcFreeHandlerPtr = name_prefix##VcFreeHandler; \ -+ (var).linkVcActivateHandlerPtr = name_prefix##VcActivateHandler; \ -+ (var).linkVcDeactivateHandlerPtr = name_prefix##VcDeactivateHandler; \ -+ (var).linkVcConfigureHandlerPtr = name_prefix##VcConfigureHandler; \ -+ \ -+ (var).linkVc2IdHandlerPtr = name_prefix##Vc2IdHandler; \ -+ (var).linkVcId2VcHandlerPtr = name_prefix##VcId2VcHandler; \ -+ (var).linkGetFramePoolHandlerPtr = name_prefix##GetFramePoolHandler; \ -+ \ -+ (var).linkRxCellHeaderHandlerPtr = name_prefix##RxCellHeaderHandler; \ -+ (var).linkRxCellDataHandlerPtr = name_prefix##RxCellDataHandler; \ -+ (var).linkTxCellHandlerPtr = name_prefix##TxCellHandler; \ -+ \ -+ (var).linkTxDataHandlerPtr = name_prefix##TxDataHandler; \ -+ (var).linkRxDataHandlerPtr = name_prefix##RxDataHandler; \ -+} while (0) -+ -+#else -+ -+#define LinkLayerAssignFunctions( var, name_prefix ) do { \ -+ (var).linkCommandHandlerPtr = name_prefix##CommandHandler; \ -+ (var).linkTimerHandlerPtr = name_prefix##TimerHandler; \ -+ (var).linkCloseHandlerPtr = name_prefix##CloseHandler; \ -+ \ -+ (var).linkSendHandlerPtr = name_prefix##SendFrameHandler; \ -+ (var).linkReturnHandlerPtr = name_prefix##ReturnFrameHandler; \ -+ \ -+ (var).linkVcAllocateHandlerPtr = name_prefix##VcAllocateHandler; \ -+ (var).linkVcFreeHandlerPtr = name_prefix##VcFreeHandler; \ -+ (var).linkVcActivateHandlerPtr = name_prefix##VcActivateHandler; \ -+ (var).linkVcDeactivateHandlerPtr = name_prefix##VcDeactivateHandler; \ -+ (var).linkVcConfigureHandlerPtr = name_prefix##VcConfigureHandler; \ -+ \ -+ (var).linkVc2IdHandlerPtr = name_prefix##Vc2IdHandler; \ -+ (var).linkVcId2VcHandlerPtr = name_prefix##VcId2VcHandler; \ -+ (var).linkGetFramePoolHandlerPtr = name_prefix##GetFramePoolHandler; \ -+ \ -+ (var).linkTxDataHandlerPtr = name_prefix##TxDataHandler; \ -+ (var).linkRxDataHandlerPtr = name_prefix##RxDataHandler; \ -+} while (0) -+ -+#endif -+ -+typedef struct -+ { -+ dslFrameHandlerType rxIndicateHandlerPtr; -+ dslFrameHandlerType txCompleteHandlerPtr; -+ dslStatusHandlerType statusHandlerPtr; -+ } upperLayerFunctions; -+ -+ -+/* -+ * Debug data -+ */ -+#define kDslFirstDebugData 1000 -+#define kDslXmtPerSymTimeCompData (kDslFirstDebugData + 0) -+#define kDslRcvPerSymTimeCompData (kDslFirstDebugData + 1) -+#define kDslXmtAccTimeCompData (kDslFirstDebugData + 2) -+#define kDslRcvAccTimeCompData (kDslFirstDebugData + 3) -+#define kDslRcvPilotToneData (kDslFirstDebugData + 4) -+#define kDslTEQCoefData (kDslFirstDebugData + 5) -+#define kDslTEQInputData (kDslFirstDebugData + 6) -+#define kDslTEQOutputData (kDslFirstDebugData + 7) -+#define kDslRcvFFTInputData (kDslFirstDebugData + 8) -+#define kDslRcvFFTOutputData (kDslFirstDebugData + 9) -+#define kDslRcvCarrierSNRData (kDslFirstDebugData + 10) -+#define kDslXmtToneOrderingData (kDslFirstDebugData + 11) -+#define kDslRcvToneOrderingData (kDslFirstDebugData + 12) -+#define kDslXmtGainData (kDslFirstDebugData + 13) -+#define kDslRcvGainData (kDslFirstDebugData + 14) -+#define kDslMseData (kDslFirstDebugData + 15) -+#define kDslFEQOutErrData (kDslFirstDebugData + 16) -+#define kDslFEQCoefData (kDslFirstDebugData + 17) -+#define kDslShowtimeMseData (kDslFirstDebugData + 18) -+#define kDslTimeEstimationHWPhaseTweak (kDslFirstDebugData + 24) -+#define kDslSlicerInput (kDslFirstDebugData + 40) -+#define kDslXmtConstellations (kDslFirstDebugData + 41) -+#define kDslSnr1ShiftData (kDslFirstDebugData + 50) -+#define kDslSnr1InputData (kDslFirstDebugData + 51) -+#define kDslSnr1ReverbAvgData (kDslFirstDebugData + 52) -+#define kDslAnnexCFextSnrData (kDslFirstDebugData + 53) -+#define kDslAnnexCNextSnrData (kDslFirstDebugData + 54) -+#define kG994p1OutputXmtSample (kDslFirstDebugData + 100) -+#define kG994p1OutputMicroBit (kDslFirstDebugData + 101) -+#define kG994p1OutputBit (kDslFirstDebugData + 102) -+#define kG994p1OutputTimer (kDslFirstDebugData + 103) -+ -+/****************************************************************************/ -+/* 2. Constant definitions. */ -+/* */ -+/* 2.1 Defininitive constants */ -+/****************************************************************************/ -+ -+/* dslDirectionType */ -+ -+#define kATU_C 0 -+#define kATU_R 1 -+ -+/* ATM setup maps */ -+ -+#define kAtmCallMgrEnabled 0x00000001 /* Bit 0 */ -+#define kAtmAAL1FecEnabledMask 0x00000006 /* Bit 1 */ -+#define kAtmAAL1HiDelayFecEnabled 0x00000002 /* Bit 2 */ -+#define kAtmAAL1LoDelayFecEnabled 0x00000004 /* Bit 3 */ -+ -+/* dslLinkLayerType */ -+ -+#define kNoDataLink 0 -+#define kAtmLink 0x00000001 -+#define kAtmPhyLink 0x00000002 -+#define kDslPacketLink 0x00000003 -+#define kDslPacketPhyLink 0x00000004 -+ -+/* dslModulationType */ -+#define kNoCommonModulation 0x00000000 -+#define kG994p1 0x00000020 /* G.994.1 or G.hs */ -+#define kT1p413 0x00000040 /* T1.413 handshaking */ -+#define kG992p1AnnexA 0x00000001 /* G.992.1 or G.dmt Annex A */ -+#define kG992p1AnnexB 0x00000002 /* G.992.1 or G.dmt Annex B */ -+#define kG992p1AnnexC 0x00000004 /* G.992.1 or G.dmt Annex C */ -+#define kG992p2AnnexAB 0x00000008 /* G.992.2 or G.lite Annex A/B */ -+#define kG992p2AnnexC 0x00000010 /* G.992.2 or G.lite Annex C */ -+#define kG992p3AnnexA 0x00000100 /* G.992.3 or G.DMTbis Annex A */ -+#define kG992p3AnnexB 0x00000200 /* G.992.3 or G.DMTbis Annex A */ -+#define kG992p1AnnexI 0x00000400 /* G.992.1 Annex I */ -+#define kG992p5AnnexA 0x00010000 /* G.992.5 Annex A */ -+#define kG992p5AnnexB 0x00020000 /* G.992.5 Annex B */ -+#define kG992p5AnnexI 0x00040000 /* G.992.5 Annex I */ -+#define kG992p3AnnexM 0x00080000 /* G.992.3 Annex M */ -+#define kG992p5AnnexM 0x01000000 /* G.992.5 Annex M */ -+ -+/* demodCapabilities bitmap */ -+#define kEchoCancellorEnabled 0x00000001 -+#define kSoftwareTimeErrorDetectionEnabled 0x00000002 -+#define kSoftwareTimeTrackingEnabled 0x00000004 -+#define kDslTrellisEnabled 0x00000008 -+#define kHardwareTimeTrackingEnabled 0x00000010 -+#define kHardwareAGCEnabled 0x00000020 -+#define kDigitalEchoCancellorEnabled 0x00000040 -+#define kReedSolomonCodingEnabled 0x00000080 -+#define kAnalogEchoCancellorEnabled 0x00000100 -+#define kT1p413Issue1SingleByteSymMode 0x00000200 -+#define kDslAturXmtPowerCutbackEnabled 0x00000400 -+#ifdef G992_ANNEXC_LONG_REACH -+#define kDslAnnexCPilot48 0x00000800 -+#define kDslAnnexCReverb33_63 0x00001000 -+#endif -+#ifdef G992_ANNEXC -+#define kDslCentilliumCRCWorkAroundEnabled 0x00002000 -+#else -+#define kDslEnableRoundUpDSLoopAttn 0x00002000 -+#endif -+#define kDslBitSwapEnabled 0x00004000 -+#define kDslADILowRateOptionFixDisabled 0x00008000 -+#define kDslAnymediaGSPNCrcFixEnabled 0x00010000 -+#define kDslMultiModesPreferT1p413 0x00020000 -+#define kDslT1p413UseRAck1Only 0x00040000 -+#define kDslUE9000ADI918FECFixEnabled 0x00080000 -+#define kDslG994AnnexAMultimodeEnabled 0x00100000 -+#define kDslATUCXmtPowerMinimizeEnabled 0x00200000 -+#define kDropOnDataErrorsDisabled 0x00400000 -+#define kDslSRAEnabled 0x00800000 -+ -+#define kDslT1p413HigherToneLevelNeeded 0x01000000 -+#define kDslT1p413SubsampleAlignmentEnabled 0x02000000 -+#define kDslT1p413DisableUpstream2xIfftMode 0x04000000 -+ -+/* test mode related demodCapabilities, for internal use only */ -+#define kDslTestDemodCapMask 0xF8000000 -+#define kDslSendReverbModeEnabled 0x10000000 -+#define kDslSendMedleyModeEnabled 0x20000000 -+#define kDslAutoRetrainDisabled 0x40000000 -+#define kDslPllWorkaroundEnabled 0x80000000 -+#define kDslAfeLoopbackModeEnabled 0x08000000 -+ -+/* demodCapabilities bitmap2 */ -+ -+#define kDslAnnexCProfile1 0x00000001 -+#define kDslAnnexCProfile2 0x00000002 -+#define kDslAnnexCProfile3 0x00000004 -+#define kDslAnnexCProfile4 0x00000008 -+#define kDslAnnexCProfile5 0x00000010 -+#define kDslAnnexCProfile6 0x00000020 -+#define kDslAnnexCPilot64 0x00000040 -+#define kDslAnnexCPilot48 0x00000080 -+#define kDslAnnexCPilot32 0x00000100 -+#define kDslAnnexCPilot16 0x00000200 -+#define kDslAnnexCA48B48 0x00000400 -+#define kDslAnnexCA24B24 0x00000800 -+#define kDslAnnexCReverb33_63 0x00001000 -+#define kDslAnnexCCReverb6_31 0x00002000 -+ -+#define kDslAnnexIShapedSSVI 0x00004000 -+#define kDslAnnexIFlatSSVI 0x00008000 -+ -+#define kDslAnnexIPilot64 0x00010000 -+#define kDslAnnexIA48B48 0x00020000 -+#define kDslAnnexIPilot128 0x00040000 -+#define kDslAnnexIPilot96 0x00080000 -+ -+/* Features bitmap */ -+#define kG992p2RACK1 0x00000001 -+#define kG992p2RACK2 0x00000002 -+#define kG992p2DBM 0x00000004 -+#define kG992p2FastRetrain 0x00000008 -+#define kG992p2RS16 0x00000010 -+#define kG992p2ClearEOCOAM 0x00000020 -+#define kG992NTREnabled 0x00000040 -+#define kG992p2EraseAllStoredProfiles 0x00000080 -+#define kG992p2FeaturesNPar2Mask 0x0000003B -+#define kG992p2FeaturesNPar2Shift 0 -+ -+#define kG992p1RACK1 0x00000100 -+#define kG992p1RACK2 0x00000200 -+#define kG992p1STM 0x00000800 -+#define kG992p1ATM 0x00001000 -+#define kG992p1ClearEOCOAM 0x00002000 -+#define kG992p1FeaturesNPar2Mask 0x00003B00 -+#define kG992p1FeaturesNPar2Shift 8 -+#define kG992p1DualLatencyUpstream 0x00004000 -+#define kG992p1DualLatencyDownstream 0x00008000 -+#define kG992p1HigherBitRates 0x40000000 -+ -+#if defined(G992P1_ANNEX_I) -+#define kG992p1HigherBitRates1over3 0x80000000 -+#define kG992p1AnnexIShapedSSVI 0x00000001 -+#define kG992p1AnnexIFlatSSVI 0x00000002 -+#define kG992p1AnnexIPilotFlag 0x00000008 -+#define kG992p1AnnexIPilot64 0x00000001 -+#define kG992p1AnnexIPilot128 0x00000004 -+#define kG992p1AnnexIPilot96 0x00000008 -+#define kG992p1AnnexIPilotA48B48 0x00000010 -+#endif -+ -+#define kG992p1AnnexBRACK1 0x00010000 -+#define kG992p1AnnexBRACK2 0x00020000 -+#define kG992p1AnnexBUpstreamTones1to32 0x00040000 -+#define kG992p1AnnexBSTM 0x00080000 -+#define kG992p1AnnexBATM 0x00100000 -+#define kG992p1AnnexBClearEOCOAM 0x00200000 -+#define kG992p1AnnexBFeaturesNPar2Mask 0x003F0000 -+#define kG992p1AnnexBFeaturesNPar2Shift 16 -+ -+#define kG992p1AnnexCRACK1 0x01000000 -+#define kG992p1AnnexCRACK2 0x02000000 -+#define kG992p1AnnexCDBM 0x04000000 -+#define kG992p1AnnexCSTM 0x08000000 -+#define kG992p1AnnexCATM 0x10000000 -+#define kG992p1AnnexCClearEOCOAM 0x20000000 -+#define kG992p1AnnexCFeaturesNPar2Mask 0x3F000000 -+#define kG992p1AnnexCFeaturesNPar2Shift 24 -+ -+#define kG992p1HigherBitRates1over3 0x80000000 -+ -+/* auxFeatures bitmap */ -+#define kG994p1PreferToExchangeCaps 0x00000001 -+#define kG994p1PreferToDecideMode 0x00000002 -+#define kG994p1PreferToMPMode 0x00000004 -+#define kAfePwmSyncClockShift 3 -+#define kAfePwmSyncClockMask (0xF << kAfePwmSyncClockShift) -+#define AfePwmSyncClockEnabled(val) (((val) & kAfePwmSyncClockMask) != 0) -+#define AfePwmGetSyncClockFreq(val) ((((val) & kAfePwmSyncClockMask) >> kAfePwmSyncClockShift) - 1) -+#define AfePwmSetSyncClockFreq(val,freq) ((val) |= ((((freq)+1) << kAfePwmSyncClockShift) & kAfePwmSyncClockMask)) -+ -+/* SubChannel Info bitMap for G992p1 */ -+#define kSubChannelASODownstream 0x00000001 -+#define kSubChannelAS1Downstream 0x00000002 -+#define kSubChannelAS2Downstream 0x00000004 -+#define kSubChannelAS3Downstream 0x00000008 -+#define kSubChannelLSODownstream 0x00000010 -+#define kSubChannelLS1Downstream 0x00000020 -+#define kSubChannelLS2Downstream 0x00000040 -+#define kSubChannelLS0Upstream 0x00000080 -+#define kSubChannelLS1Upstream 0x00000100 -+#define kSubChannelLS2Upstream 0x00000200 -+#define kSubChannelInfoOctet1Mask 0x0000001F -+#define kSubChannelInfoOctet2Mask 0x000003E0 -+#define kSubChannelInfoOctet1Shift 0 -+#define kSubChannelInfoOctet2Shift 5 -+ -+/****************************************************************************/ -+/* 3. Interface functions. */ -+/* */ -+/****************************************************************************/ -+ -+#ifdef G992P1 -+#if defined(G992P1_ANNEX_I2X) || defined(G992P5) -+/* lke */ -+#define kDslSamplingFreq 4416000 -+#define kDslMaxFFTSize 1024 -+#define kDslMaxFFTSizeShift 10 -+#elif defined(G992P1_ANNEX_I4X) -+#define kDslSamplingFreq 8832000 -+#define kDslMaxFFTSize 2048 -+#define kDslMaxFFTSizeShift 11 -+#elif defined(G992P1_ANNEX_I8X) -+#define kDslSamplingFreq 17664000 -+#define kDslMaxFFTSize 4096 -+#define kDslMaxFFTSizeShift 12 -+#else -+#define kDslSamplingFreq 2208000 -+#define kDslMaxFFTSize 512 -+#define kDslMaxFFTSizeShift 9 -+#endif -+#else -+#define kDslSamplingFreq 1104000 -+#define kDslMaxFFTSize 256 -+#define kDslMaxFFTSizeShift 8 -+#endif -+ -+#if defined(G992_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ) -+#define kDslATURUpstreamSamplingFreq 276000 -+#define kDslATURFFTSizeShiftUpstream 6 -+#elif defined(G992_ATUR_UPSTREAM_SAMPLING_FREQ_552KHZ) -+#define kDslATURUpstreamSamplingFreq 552000 -+#define kDslATURFFTSizeShiftUpstream 7 -+#else -+#define kDslATURUpstreamSamplingFreq kDslSamplingFreq -+#define kDslATURFFTSizeShiftUpstream kDslMaxFFTSizeShift -+#endif -+ -+#if defined(G992_ATUC_UPSTREAM_SAMPLING_FREQ_276KHZ) -+#define kDslATUCUpstreamSamplingFreq 276000 -+#define kDslATUCFFTSizeShiftUpstream 6 -+#elif defined(G992_ATUC_UPSTREAM_SAMPLING_FREQ_552KHZ) -+#define kDslATUCUpstreamSamplingFreq 552000 -+#define kDslATUCFFTSizeShiftUpstream 7 -+#else -+#define kDslATUCUpstreamSamplingFreq kDslSamplingFreq -+#define kDslATUCFFTSizeShiftUpstream kDslMaxFFTSizeShift -+#endif -+ -+#define kDslMaxSamplesPerSymbol (kDslMaxFFTSize+kDslMaxFFTSize/16) -+ -+#if defined(G992P1_ANNEX_I) || defined(G992P5) -+#define kDslMaxTEQLength 32 -+#else -+#define kDslMaxTEQLength 16 -+#endif -+ -+#define kDslMaxSymbolBlockSize 1 -+#define kDslMaxSampleBlockSize (kDslMaxSymbolBlockSize*kDslMaxSamplesPerSymbol) -+ -+#ifdef G992_ANNEXC -+#define kG992AnnexCXmtToRcvPathDelay 512 /* In samples at kDslSamplingFreq */ -+#endif -+ -+/*** For compatibility with existing test codes ***/ -+#if !defined(TARG_OS_RTEMS) -+typedef dslStatusCode modemStatusCode; -+typedef dslStatusStruct modemStatusStruct; -+typedef dslStatusHandlerType statusHandlerType; -+typedef dslCommandCode modemCommandCode; -+typedef dslCommandStruct modemCommandStruct; -+typedef dslCommandHandlerType commandHandlerType; -+#endif -+ -+extern void SM_DECL SoftDslSetRefData (void *gDslVars, ulong refData); -+extern ulong SM_DECL SoftDslGetRefData (void *gDslVars); -+extern int SM_DECL SoftDslGetMemorySize(void); -+extern void SM_DECL SoftDslInit (void *gDslVars); -+extern void SM_DECL SoftDslReset (void *gDslVars); -+extern void SM_DECL SoftDslLineHandler (void *gDslVars, int rxNSamps, int txNSamps, short *rcvPtr, short *xmtPtr) FAST_TEXT; -+extern Boolean SM_DECL SoftDslCommandHandler (void *gDslVars, dslCommandStruct *cmdPtr); -+ -+/* swap Lmem functions */ -+#if defined(bcm47xx) && defined(SWAP_LMEM) -+extern int SoftDslSwapLmem(void *gDslVars, int sectionN, int imageN); -+extern void init_SoftDslSwapLmem(void); -+#endif -+ -+/* SoftDsl time functions */ -+ -+extern ulong SM_DECL SoftDslGetTime(void *gDslVars); -+#define __SoftDslGetTime(gv) gDslGlobalVarPtr->execTime -+ -+extern void SM_DECL SoftDslTimer(void *gDslVars, ulong timeMs); -+ -+/* SoftDsl IO functions */ -+ -+extern void SM_DECL SoftDslClose (void *gDslVars); -+extern int SM_DECL SoftDslSendFrame (void *gDslVars, void *pVc, ulong mid, dslFrame * pFrame); -+extern int SM_DECL SoftDslReturnFrame (void *gDslVars, void *pVc, ulong mid, dslFrame * pFrame); -+ -+/* SoftDsl connection functions */ -+ -+extern void* SM_DECL SoftDslVcAllocate(void *gDslVars, dslVcParams *pVcParams); -+extern void SM_DECL SoftDslVcFree(void *gDslVars, void *pVc); -+extern Boolean SM_DECL SoftDslVcActivate(void *gDslVars, void *pVc); -+extern void SM_DECL SoftDslVcDeactivate(void *gDslVars, void *pVc); -+extern Boolean SM_DECL SoftDslVcConfigure(void *gDslVars, void *pVc, ulong mid, dslVcParams *pVcParams); -+ -+/* Special functions for LOG support */ -+ -+extern ulong SM_DECL SoftDslVc2Id(void *gDslVars, void *pVc); -+extern void* SM_DECL SoftDslVcId2Vc(void *gDslVars, ulong vcId); -+extern void* SM_DECL SoftDslGetFramePool(void *gDslVars); -+ -+/* Functions for host mode execution */ -+ -+extern void* SM_DECL SoftDslRxCellHeaderHandler (void *gDslVars, ulong hdr, uchar hdrHec); -+extern void* SM_DECL SoftDslRxCellDataHandler (void *gDslVars, int, void*); -+extern void* SM_DECL SoftDslTxCellHandler (void *gDslVars, int*, void*); -+extern Boolean SM_DECL SoftDslPhyCommandHandler (void *gDslVars, dslCommandStruct *cmdPtr); -+ -+/* Functions getting OEM parameters including G994 non standard info management */ -+ -+extern char* SM_DECL SoftDslGetTrainingVendorIDString(void *gDslVars); -+extern char* SM_DECL SoftDslGetVendorIDString(void *gDslVars); -+extern char* SM_DECL SoftDslGetSerialNumberString(void *gDslVars); -+extern char* SM_DECL SoftDslGetRevString(void *gDslVars); -+extern int SM_DECL SoftDslRevStringSize(void *gDslVars); -+extern int SM_DECL SoftDslSerNumStringSize(void *gDslVars); -+ -+extern void* SM_DECL SoftDslGetG994p1RcvNonStdInfo(void *gDslVars, ulong *pLen); -+extern void* SM_DECL SoftDslGetG994p1XmtNonStdInfo(void *gDslVars, ulong *pLen); -+ -+#ifdef G997_1_FRAMER -+ -+/* G997 functions */ -+ -+extern int SM_DECL SoftDslG997SendFrame (void *gDslVars, void *pVc, ulong mid, dslFrame * pFrame); -+extern int SM_DECL SoftDslG997ReturnFrame (void *gDslVars, void *pVc, ulong mid, dslFrame * pFrame); -+ -+#endif -+ -+#ifdef ADSL_MIB -+extern void * SM_DECL SoftDslMibGetData (void *gDslVars, int dataId, void *pAdslMibData); -+#endif -+ -+#define SoftDsl SoftDslLineHandler -+#define kSoftDslMaxMemorySize (32768*16384) -+ -+/* -+ * Internal functions -+ */ -+ -+extern void SoftDslStatusHandler (void *gDslVars, dslStatusStruct *status) FAST_TEXT; -+extern void SoftDslInternalStatusHandler (void *gDslVars, dslStatusStruct *status); -+ -+/* -+ * DSL OS functions -+ */ -+ -+#ifdef DSL_OS -+ -+#define SoftDslIsBgAvailable(gDslVars) (DSLOS_THREAD_INACTIVE == DslOsGetThreadState(&(gDslGlobalVarPtr->tcbDslBg))) -+#define SoftDslGetBgThread(gDslVars) \ -+ ((DSLOS_THREAD_INACTIVE != DslOsGetThreadState(&(gDslGlobalVarPtr->tcbDslBg))) ? &gDslGlobalVarPtr->tcbDslBg : NULL) -+#define SoftDslBgStart(gDslVars, pFunc) \ -+ DslOsCreateThread(&gDslGlobalVarPtr->tcbDslBg, DSLOS_PRIO_HIGHEST - 10, pFunc, gDslVars, \ -+ WB_ADDR(gDslGlobalVarPtr->bgStack), sizeof(gDslGlobalVarPtr->bgStack)) -+#define SoftDslBgStop(gDslVars) DslOsDeleteThread(&gDslGlobalVarPtr->tcbDslBg) -+ -+#define SoftDslEnterCritical() DslOsEnterCritical() -+#define SoftDslLeaveCritical(id) DslOsLeaveCritical(id) -+ -+#else -+ -+#define SoftDslIsBgAvailable(gDslVars) 1 -+#define SoftDslGetBgThread(gDslVars) 1 -+#define SoftDslBgStart(gDslVars, pFunc) (*pFunc)(gDslVars) -+#define SoftDslBgStop(gDslVars) -+ -+#define SoftDslEnterCritical() 0 -+#define SoftDslLeaveCritical(id) -+ -+#endif -+ -+/* -+ * DSL frames and native frame functions -+ */ -+ -+DslFrameDeclareFunctions (DslFrameNative) -+ -+/* -+ * These functions are for testing purpose, they are defined outside. -+ */ -+#ifdef STACK_SIZE_REQUIREMENT_TEST -+extern void StackSizeTestInitializeStackBeforeEntry(void); -+extern void StackSizeTestCheckStackAfterExit(void); -+extern void StackSizeTestBackupStack(void); -+extern void StackSizeTestRestoreStack(void); -+#endif /* STACK_SIZE_REQUIREMENT_TEST */ -+ -+#ifdef NEC_NSIF_WORKAROUND -+#define SoftDslGetG994NsStatus(gDslVars) (gDslGlobalVarPtr->G994NsStatus) -+#define SoftDslGetG994NsFailCounter(gDslVars) (gDslGlobalVarPtr->G994NsFailCounter) -+#endif -+ -+#endif /* SoftDslHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftModem.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftModem.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftModem.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftModem.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,3128 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * SoftModem.h -+ * -+ * -+ * Description: -+ * This file contains the exported interface for SoftModem.c -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Mark Gonikberg, Haixiang Liang. -+ * -+ * $Revision: 1.16 $ -+ * -+ * $Id: SoftModem.h,v 1.16 2004/04/14 21:16:51 ilyas Exp $ -+ * -+ * $Log: SoftModem.h,v $ -+ * Revision 1.16 2004/04/14 21:16:51 ilyas -+ * Merged with the latest changes in ADSL driver -+ * -+ * Revision 1.15 2004/04/13 00:56:10 ilyas -+ * Merged the latest ADSL driver changes for RTEMS -+ * -+ * Revision 1.14 2004/04/13 00:16:59 ilyas -+ * Merged the latest ADSL driver changes -+ * -+ * Revision 1.13 2003/02/22 05:07:11 ilyas -+ * Added VendorID for T1.413 mode -+ * -+ * Revision 1.12 2002/10/03 19:34:24 ilyas -+ * Added size for EOC serial number register -+ * -+ * Revision 1.11 2002/09/07 01:37:22 ilyas -+ * Added support for OEM parameters -+ * -+ * Revision 1.10 2001/12/13 02:25:34 ilyas -+ * Added definitions for G997 -+ * -+ * Revision 1.9 2001/11/30 05:56:34 liang -+ * Merged top of the branch AnnexBDevelopment onto top of the tree. -+ * -+ * Revision 1.7.2.2 2001/11/27 02:32:05 liang -+ * Combine vendor ID, serial #, and version number into SoftModemVersionNumber.c. -+ * -+ * Revision 1.7.2.1 2001/10/03 01:44:10 liang -+ * Merged with codes from main tree (tag SoftDsl_2_18). -+ * -+ * Revision 1.8 2001/09/21 19:19:01 ilyas -+ * Minor fixes for VxWorks build -+ * -+ * Revision 1.7 2000/07/17 21:08:16 lkaplan -+ * removed global pointer -+ * -+ * Revision 1.6 2000/05/03 04:09:11 ilyas -+ * Added ID for ATM log data -+ * -+ * Revision 1.5 2000/04/01 01:07:44 liang -+ * Changed file names and some module names. -+ * -+ * Revision 1.4 2000/03/02 20:18:12 ilyas -+ * Added test status code for ATM VC finished -+ * -+ * Revision 1.3 1999/08/05 20:02:11 liang -+ * Merged with the softmodem top of the tree on 08/04/99. -+ * -+ * Revision 1.2 1999/01/27 22:19:08 liang -+ * Merge with SoftModem_3_1_02. -+ * Include SoftDsl.h conditionlly so that the test utilities from SoftModem -+ * can be used without major change. It can be merged easily to SoftModem. -+ * -+ * Revision 1.170 1998/12/22 00:52:52 liang -+ * Added auxFeatures bit kV8HoldANSamUntilDetCI. When it is set, ANSam won't be -+ * sent until CI is detected (normally ANSam will be sent after 200ms). This is -+ * useful in V34 half duplex fax mode. -+ * -+ * Revision 1.169 1998/12/19 04:46:52 mwg -+ * Added bits for fax/data calling tones -+ * -+ * Revision 1.168 1998/12/17 02:46:10 scott -+ * Removed overlay-related commands/statuses and added -+ * kSetTrainingDelayReductionCmd -+ * -+ * Revision 1.167 1998/12/12 03:17:42 scott -+ * Added overlay commands and statuses -+ * -+ * Revision 1.166 1998/12/02 05:34:23 mwg -+ * Fixed a problem with bong tone detection -+ * -+ * Revision 1.165 1998/11/26 00:22:44 yura -+ * Added two more log data types: modulatorInputData & modulatorOutputData -+ * -+ * Revision 1.164 1998/11/19 03:08:04 mwg -+ * Added kSetCallProgressParamsCmd -+ * -+ * Revision 1.163 1998/11/18 23:00:03 liang -+ * Added a separate command kLoopbackTestAutoRespEnableCmd to enable or disable -+ * the loopback test auto respond feature when the modem is already on-line. -+ * -+ * Revision 1.162 1998/11/13 20:50:21 scott -+ * SoftModemInternalStatusHandler is now SM_DECL as well -+ * -+ * Revision 1.161 1998/11/13 20:42:25 scott -+ * Added SM_DECL type to entrypoint functions -+ * -+ * Revision 1.160 1998/11/13 03:02:54 scott -+ * Added SoftModemTimer prototype. -+ * Also include V.8bis types if AT_COMMANDS_V8BIS is defined. -+ * -+ * Revision 1.159 1998/11/12 01:22:46 scott -+ * Increased number of AT registers to 46 -+ * -+ * Revision 1.158 1998/11/05 22:35:18 yura -+ * Added two more S-registers -+ * -+ * Revision 1.157 1998/11/05 03:09:54 mwg -+ * Added kLapmRetryFailed to the list of LAPM errors -+ * -+ * Revision 1.156 1998/11/05 00:13:20 liang -+ * Add new connectionInfo status kLoopbackSelfTestNewErrs to report -+ * new bit errors whenever it happens. -+ * -+ * Revision 1.155 1998/11/04 07:11:33 mwg -+ * Moved declaration for SoftModemATPrintf() to SoftModem.h -+ * -+ * Revision 1.154 1998/10/29 07:24:49 mwg -+ * *** empty log message *** -+ * -+ * Revision 1.153 1998/10/15 02:09:37 luisgm -+ * added separate data rate mask for Flex to dataPumpCapabilities structure -+ * -+ * Revision 1.152 1998/10/14 00:12:15 scott -+ * Added kMnpOOBFrameCmd and command.frameSpec -+ * -+ * Revision 1.151 1998/10/09 02:19:22 luisgm -+ * added FlexV8bisStruct member to dataPumpCapabilities struc to store flex v8bis info, added define for kFlexSkipV8bis -+ * -+ * Revision 1.150 1998/10/06 19:36:33 mwg -+ * Limited 56K rates to 53K -+ * -+ * Revision 1.149 1998/10/03 03:43:38 ilyas -+ * Added status codes for Audio -+ * -+ * Revision 1.148 1998/10/01 02:03:17 mwg -+ * Added external pulse dialer option -+ * -+ * Revision 1.147 1998/09/30 01:44:26 mwg -+ * Added new functions SoftModemGetWriteBufferSize() & SoftModemGetReadBufferSize() -+ * -+ * Revision 1.146 1998/09/22 03:44:38 scott -+ * Added ALWAYS_LONG_ALIGN() macro -+ * -+ * Revision 1.145 1998/09/21 21:49:22 scott -+ * Added logDataCodes for mnpDecoder(Input/Output)Data -+ * -+ * Revision 1.144 1998/08/31 22:57:21 luisgm -+ * added constants for Flex data rates + kFlexEventTRN2AFinished -+ * -+ * Revision 1.143 1998/08/18 05:09:53 mwg -+ * Increased AT command buffer size to 128 -+ * -+ * Revision 1.142 1998/08/18 03:45:54 ilyas -+ * Integrated Audio into V70 test -+ * -+ * Revision 1.141 1998/08/14 17:46:04 ilyas -+ * Integrated Audio and G729a -+ * -+ * Revision 1.140 1998/08/10 21:42:19 mwg -+ * Added space and mark parity -+ * -+ * Revision 1.139 1998/08/08 03:39:33 scott -+ * Moved the C6xDefs and PentiumDefs includes before the internal function -+ * prototypes (to permit their redefinitions) -+ * -+ * Revision 1.138 1998/08/07 20:37:27 yura -+ * Added new S-register for &T commands -+ * -+ * Revision 1.137 1998/08/01 05:22:09 mwg -+ * Implemented split memory model -+ * -+ * Revision 1.136 1998/07/22 02:12:22 liang -+ * Added self test mode for loopback test. -+ * -+ * Revision 1.135 1998/07/21 01:19:03 liang -+ * Changed loopback test command parameter interface to use regular modeSpec. -+ * -+ * Revision 1.134 1998/07/18 03:52:10 liang -+ * Added V54 loop 2 test for V22. -+ * -+ * Revision 1.133 1998/07/15 02:45:03 mwg -+ * Added new connection info code: kPCMSpectralShapingBits -+ * -+ * Revision 1.132 1998/07/15 00:18:48 liang -+ * Add special turn off command for V34 fax to handle different turn off procedures. -+ * -+ * Revision 1.131 1998/07/13 22:19:49 liang -+ * Add V8 CI detection status and ANSam disable aux feature. -+ * -+ * Revision 1.130 1998/07/08 17:09:13 scott -+ * Added USE_LONG_ALIGN; support for 6 and PentiumDefs.h files -+ * -+ * Revision 1.129 1998/07/03 23:28:13 mwg -+ * Added Fax Class 2 defines -+ * -+ * Revision 1.128 1998/07/03 23:17:33 mwg -+ * Insuread command/status structures are long aligned -+ * -+ * Revision 1.127 1998/06/23 16:48:01 mwg -+ * Fixed a longstanding problem typical for Win95 VxD: whenever new -+ * VxD is intalled the confuguration profile may not match the old one but -+ * since the crc is correct it is still being downloaded. To avoid the problem -+ * a crc for the version number was added to avoid confusion between profiles -+ * of different versions. -+ * -+ * Revision 1.126 1998/06/19 21:04:06 liang -+ * Add auxiliary feature bit kV90ServerNotDetSbarAfterJdbarFix. -+ * -+ * Revision 1.125 1998/06/11 22:48:14 liang -+ * Add kPCM28000bpsShift constant. -+ * -+ * Revision 1.124 1998/06/05 22:11:51 liang -+ * New V90 DIL works through data mode. -+ * -+ * Revision 1.123 1998/06/01 23:03:41 liang -+ * Add v90RcvdDilDiffData logging. -+ * -+ * Revision 1.122 1998/06/01 21:24:38 mwg -+ * Changed some of the names. -+ * -+ * Revision 1.121 1998/05/13 04:55:22 mwg -+ * Now passing the number of spectral shaping bits in aux features -+ * -+ * Revision 1.120 1998/05/13 02:53:13 liang -+ * Add field "value" to command param structure. -+ * -+ * Revision 1.119 1998/05/12 04:42:23 mwg -+ * Replaced some of the status messages -+ * -+ * Revision 1.118 1998/05/11 23:36:10 mwg -+ * Added 8000Hz symbol rate to the map -+ * -+ * Revision 1.117 1998/05/05 04:28:39 liang -+ * V90 works up to data mode first version. -+ * -+ * Revision 1.116 1998/04/21 09:36:45 mwg -+ * Fixed a few problems for 16Khz and added 32Khz. -+ * -+ * Revision 1.115 1998/04/17 22:33:54 liang -+ * Added V90 DIL for mu-law PCM. -+ * -+ * Revision 1.114 1998/04/15 22:36:39 mwg -+ * Added new parameters to kDialCmd to allow individual control of each -+ * DTMF group attenuation. -+ * -+ * Revision 1.113 1998/04/15 18:16:22 ilyas -+ * Integrated V.8bis and changed coding of LinkLayerType to bitMap -+ * -+ * Revision 1.112 1998/04/15 07:59:06 mwg -+ * Added new status codes for V.90 -+ * -+ * Revision 1.111 1998/04/11 00:29:16 mwg -+ * Fixed the warnings which appeared when Irix builds were upgraded to -+ * gcc 2.8.1 -+ * -+ * Revision 1.110 1998/04/11 00:25:01 ilyas -+ * More V.70 statuses -+ * -+ * Revision 1.109 1998/04/10 23:29:31 mwg -+ * Added new field to capabilities: dataRates56K -+ * -+ * Revision 1.108 1998/04/09 02:02:56 mwg -+ * Added status for Ja detection. -+ * -+ * Revision 1.107 1998/04/03 02:05:30 ilyas -+ * More V.70 commands added -+ * -+ * Revision 1.106 1998/04/02 06:15:39 mwg -+ * Added coding type (Mu-law/A-law) status reporting. -+ * -+ * Revision 1.105 1998/03/30 09:53:57 mwg -+ * Added definition for k56Flex modulation for future use. -+ * -+ * Revision 1.104 1998/03/27 17:56:09 ilyas -+ * Added definitions for V.70 -+ * -+ * Revision 1.103 1998/03/26 23:29:04 liang -+ * Added first version of IMD estimation. -+ * -+ * Revision 1.102 1998/03/20 04:37:26 mwg -+ * Increased the size of the nominal variance to 32 bit. -+ * -+ * Revision 1.101 1998/03/06 01:22:04 yura -+ * Improved Win95 VxD segmentation handling -+ * -+ * Revision 1.100 1998/03/06 01:06:18 liang -+ * Add initial version of V90 phase 1 and 2. -+ * -+ * Revision 1.99 1998/03/05 23:42:22 mwg -+ * (hxl) Implemented enable/disable call waiting command. -+ * -+ * Revision 1.98 1998/02/26 06:13:06 mwg -+ * Increased the number of AT S-registers to account for newly introduced -+ * S9 and S10. -+ * -+ * Revision 1.97 1998/02/25 18:18:25 scott -+ * Added v42bisCycleCount for V42BIS_THROUGHPUT_CONTROL -+ * -+ * Revision 1.96 1998/02/24 05:31:20 mwg -+ * Added stuff required by international version of AT command processor. -+ * -+ * Revision 1.95 1998/02/17 01:14:10 scott -+ * Reenabled sys/types.h for Linux builds -+ * -+ * Revision 1.94 1998/02/16 22:32:23 scott -+ * Changed copyright notice -+ * -+ * Revision 1.93 1998/02/16 22:17:44 scott -+ * Turned off include of sys/types.h for normal builds -+ * -+ * Revision 1.92 1998/02/16 21:53:28 scott -+ * Exclude sys/types.h for another compiler -+ * -+ * Revision 1.91 1998/02/09 18:24:10 scott -+ * Fixed ComplexShort type to work around bugs in MS and GreenHill compilers -+ * -+ * Revision 1.90 1998/01/27 01:37:36 mwg -+ * Added new log identifier for pcm infidelity data. -+ * -+ * Revision 1.89 1998/01/22 19:49:32 liang -+ * Add auxFeature bit kFaxV34HDXAllowAsymCtrlChan. -+ * -+ * Revision 1.88 1998/01/21 02:32:01 liang -+ * Add more V34 half duplex training progress codes. -+ * -+ * Revision 1.87 1997/12/23 03:28:25 liang -+ * Add more half duplex V34 related constants. -+ * -+ * Revision 1.86 1997/12/18 19:38:50 scott -+ * Added agcData log type. -+ * Added kDisableFaxFastClearDown demod capability -+ * -+ * Revision 1.85 1997/12/18 06:02:45 mwg -+ * Added a function to reenable DC offset tracking. -+ * -+ * Revision 1.84 1997/12/17 22:46:30 mwg -+ * Minor modifications to X2 escape status reporting. -+ * -+ * Revision 1.83 1997/12/16 06:49:45 mwg -+ * Implemented proper data rate reporting for PCM modem. -+ * -+ * Revision 1.82 1997/12/13 06:11:08 mwg -+ * Added X2 interface hooks -+ * -+ * Revision 1.81 1997/12/02 06:21:33 mwg -+ * Implemented kSetATRegister command. -+ * -+ * Revision 1.80 1997/11/27 02:11:41 liang -+ * Add code for half duplex V34 control channel. -+ * -+ * Revision 1.79 1997/11/19 19:52:48 guy -+ * Added constant to define V.34 half duplex operation -+ * -+ * Revision 1.78 1997/10/24 05:15:53 scott -+ * Added AGC and phase hit recovery to demodCapabilities -+ * -+ * Revision 1.77 1997/10/01 02:47:50 liang -+ * Add PCM interface. -+ * -+ * Revision 1.76 1997/09/29 15:48:04 yura -+ * Added #pragma statement for W95 Vxd -+ * -+ * Revision 1.75 1997/09/18 20:32:39 scott -+ * Do not include VxD support files if GENERATE_DEPENDENCIES is defined. -+ * -+ * Revision 1.74 1997/09/18 12:40:55 yura -+ * Removed #ifdef statments to be more robust -+ * -+ * Revision 1.73 1997/09/17 17:32:41 scott -+ * Do not include sys/types.h for 6 -+ * -+ * Revision 1.72 1997/08/08 00:53:48 mwg -+ * Added fields for LAP-M frames printout. -+ * Added fields in auxFeatures to pass preemphasis filter parameters -+ * to V.34 phase 3 when doing PTT testing. -+ * -+ * Revision 1.71 1997/08/06 03:41:45 yura -+ * Added a few includes and defines needed by Win 95 driver. -+ * -+ * Revision 1.70 1997/08/05 03:22:10 liang -+ * Add equalizer center tap adjustment calculation related constants. -+ * -+ * Revision 1.69 1997/07/29 02:44:19 mwg -+ * Added new field to dataPumpCapabilities structure. This field is not -+ * yet exposed to external interface and currently is only used to -+ * enable PTT testing. -+ * Added new commands: kStartDataModemPTTTestCmd & kStartDataModemLoopbackTestCmd -+ * -+ * Revision 1.68 1997/07/22 22:05:10 liang -+ * Change sample rate setup as a normal command. -+ * -+ * Revision 1.67 1997/07/21 23:23:30 liang -+ * Define SoftModemSetSampleRate as null when SAMPLE_RATE_CONVERSION is not defined. -+ * -+ * Revision 1.66 1997/07/21 22:38:36 liang -+ * Change sample rate converter structure so that sample rate can be changed -+ * on the fly (at very begining) to either 8KHz or 9600Hz. -+ * -+ * Revision 1.65 1997/07/21 20:22:01 mwg -+ * Added statusInfoData to the log identifiers. -+ * -+ * Revision 1.64 1997/07/16 20:40:07 scott -+ * Added multitone monitor fields -+ * -+ * Revision 1.63 1997/07/10 02:31:08 mwg -+ * 1. Added kRxFrameHDLCFlags detected status for the -+ * framingInfo. -+ * 2. Added kLapmMNPFrameDetected status to lapmStatusCode. -+ * 3. Increased the number of AT registers to 35 -+ * 4. Modified LinkLayerSpec structure in modemCommandStruc -+ * to provide the initial values of rxDataRate & -+ * txDataRate and RT delay for the cases when -+ * link layer is started *after* the data connection -+ * is established and the status snooper is unable -+ * to determine the rates and RT delay. -+ * 5. Added a few extra *empty* constant definitions for -+ * disabled features. -+ * -+ * Revision 1.62 1997/07/02 19:15:05 scott -+ * Added bits for Bel103 & Bel212 modulations. -+ * -+ * Revision 1.61 1997/07/02 05:15:16 mwg -+ * Added MNP code. -+ * -+ * Revision 1.60 1997/07/01 23:52:48 mwg -+ * Modified the record test setup to log and use all the commands. -+ * -+ * Revision 1.59 1997/06/25 19:11:26 mwg -+ * 1. Added new framingInfoCode values for Async framing error reporting; -+ * 2. Added a substructure to pass serial data format for kSetDTERate cmd; -+ * -+ * Revision 1.58 1997/05/28 02:05:08 liang -+ * Add PCM modem phase 2 codes. -+ * -+ * Revision 1.57 1997/05/12 21:55:08 liang -+ * Add call waiting tone detector module. -+ * -+ * Revision 1.56 1997/03/21 23:50:08 liang -+ * Added initial version of V8bis module to CVS tree. -+ * -+ * Revision 1.55 1997/03/19 18:35:05 mwg -+ * Changed copyright notice. -+ * -+ * Revision 1.54 1997/03/11 11:11:45 mwg -+ * Added code to report V42bis statistics. -+ * -+ * Revision 1.53 1997/03/04 06:21:08 mwg -+ * Added logging of most commands. -+ * -+ * Revision 1.52 1997/02/28 23:45:13 liang -+ * Added training progress status report kPhaseJitterDeactivated. -+ * -+ * Revision 1.51 1997/02/28 22:23:22 mwg -+ * Implemented the following features: -+ * - Cleardown for fax modulations V.27, V.29 V.17 -+ * - Rockwell compatible bitmap report (needed by a customer) -+ * -+ * Revision 1.50 1997/02/28 03:05:31 mwg -+ * Added more logging data types. -+ * -+ * Revision 1.49 1997/02/27 05:28:58 mwg -+ * Added RxFrameOK report. -+ * -+ * Revision 1.48 1997/02/27 01:48:53 liang -+ * Add kV8MenuDataWord1 and kV8MenuDataWord2 connectionInfo status. -+ * -+ * Revision 1.47 1997/02/24 02:30:27 mwg -+ * Added new log data: predictorErrData -+ * -+ * Revision 1.46 1997/02/22 03:00:22 liang -+ * Add echoCancelledSignalData. -+ * -+ * Revision 1.45 1997/02/21 01:26:42 liang -+ * Add six more bits for the Demodulator capabilities to deal with 2nd order -+ * time tracking & PLLs, as well as shorter NEEC & PFEEC, and front end HBF. -+ * -+ * Revision 1.44 1997/02/17 03:09:00 mwg -+ * Added LAPM statistics printout. -+ * -+ * Revision 1.43 1997/02/04 08:38:47 mwg -+ * Added dc cancelled samples printout. -+ * -+ * Revision 1.42 1997/01/29 21:40:28 mwg -+ * Changed the way timers work: now time is passed as Q4 ms instead of ticks. -+ * Completed the 8KHz front end implementation. -+ * Got rid of kSamplesPerSecond constant. -+ * -+ * Revision 1.41 1997/01/24 07:13:50 mwg -+ * Added new statuses for automoder. -+ * -+ * Revision 1.40 1997/01/23 02:03:08 mwg -+ * Replaced old sample rate conversion with the newer one. -+ * Still has to resolve the automoding issue. -+ * -+ * Revision 1.39 1997/01/21 00:55:04 mwg -+ * Added 8KHz front end functionality. -+ * -+ * Revision 1.38 1996/11/13 00:30:55 liang -+ * Add kAutoLoadReductionEnabled to demodCapabilities so that PFEEC, FEEC, IEEC -+ * can be disabled automatically, but for worst processor loading test they -+ * won't be disabled when this bit is not set. -+ * -+ * Revision 1.37 1996/11/07 23:07:18 mwg -+ * Rearranged global variables to allow V.17 short training. -+ * -+ * Revision 1.36 1996/09/17 23:55:05 liang -+ * Change kMaxDataBlockSize from 16 to 24 to handle high data rates. -+ * -+ * Revision 1.35 1996/09/05 19:43:39 liang -+ * Removed caller ID error status code kCallerIDUnknownMessageType, and -+ * added caller ID status codes kCallerIDUnknownMessage & kCallerIDWholeMessage. -+ * Changed the callerIDStatus report structure. -+ * -+ * Revision 1.34 1996/08/29 00:36:57 liang -+ * Added kLapmTxFrameStatus and kLapmRxFrameStatus. -+ * -+ * Revision 1.33 1996/08/27 22:56:01 liang -+ * Added kResetHardware status code. -+ * -+ * Revision 1.32 1996/08/23 23:35:35 liang -+ * Add kATDebugStatus and function SoftModemGetHybridDelay. -+ * -+ * Revision 1.31 1996/08/22 01:13:19 yg -+ * Added AT command processor. -+ * -+ * Revision 1.30 1996/08/12 21:46:47 mwg -+ * Added code to report capabilities. -+ * -+ * Revision 1.29 1996/08/10 01:59:59 mwg -+ * Added report of the sent rate sequence; -+ * -+ * Revision 1.28 1996/08/07 22:15:02 mwg -+ * Added new status reports: -+ * kRemoteFreqOffset -+ * kIEECDeactivated -+ * kPFEECDeactivated -+ * -+ * Revision 1.27 1996/06/27 05:15:48 mwg -+ * Added V.24 circuit status. -+ * -+ * Revision 1.26 1996/06/27 02:12:43 mwg -+ * Cleaned the code. -+ * -+ * Revision 1.25 1996/06/20 23:57:30 mwg -+ * Added new training progress status. -+ * -+ * Revision 1.24 1996/06/18 21:13:50 mwg -+ * Added trellis MSE data logging. -+ * -+ * Revision 1.23 1996/06/12 02:31:10 mwg -+ * Added new type: VeryLong -+ * -+ * Revision 1.22 1996/06/08 22:15:39 mwg -+ * Added new status report: kCleardownStarted -+ * Added new field for the features: kV34bisEnabled -+ * -+ * Revision 1.21 1996/05/31 00:29:11 liang -+ * Add feature bit kV34ExtraINFOPreamble. -+ * -+ * Revision 1.20 1996/05/30 23:28:31 mwg -+ * Replaced enums with #defines -+ * -+ * Revision 1.19 1996/05/25 00:38:27 mwg -+ * Added kProjectedDataRate training progress report. -+ * -+ * Revision 1.18 1996/05/24 23:27:15 mwg -+ * Added mode status codes. -+ * -+ * Revision 1.17 1996/05/10 05:39:59 liang -+ * Move the includes for DEBUG inside "ifndef SoftModemTypes" so that -+ * cap build won't break. -+ * -+ * Revision 1.16 1996/05/08 01:49:34 mwg -+ * Added capability to setup auxiliary data channel handlers. -+ * -+ * Revision 1.15 1996/05/07 22:51:08 liang -+ * Added group delay estimation and improved symbol rate selection process. -+ * -+ * Revision 1.14 1996/05/06 06:49:09 mwg -+ * Fixed linux problems. -+ * -+ * Revision 1.13 1996/05/02 08:40:16 mwg -+ * Merged in Chromatic bug fixes. -+ * -+ * Revision 1.12 1996/05/02 02:26:21 mwg -+ * Added code to implement dozing functionality for v.34. -+ * -+ * Revision 1.11 1996/05/01 22:43:13 mwg -+ * Added new command: kDozeCmd; -+ * -+ * Revision 1.10 1996/05/01 19:20:16 liang -+ * Add command codes kInitiateRetrainCmd and kInitiateRateRenegotiationCmd. -+ * -+ * Revision 1.9 1996/04/25 01:12:37 mwg -+ * Added new flag: rapid preliminary EC training. -+ * -+ * Revision 1.8 1996/04/20 02:26:22 mwg -+ * Added preliminary far-end echo support -+ * -+ * Revision 1.7 1996/04/15 23:26:16 mwg -+ * Changed flag definitions for v34 modem. -+ * -+ * Revision 1.6 1996/04/04 02:35:50 liang -+ * Change kCid from 0x0080 to 0x0004 (0x0080 is defined as kV32). -+ * -+ * Revision 1.5 1996/03/08 23:07:01 mwg -+ * Added name for the struct. -+ * -+ * Revision 1.4 1996/03/02 00:59:27 liang -+ * Added typedef for V34CodingParameters structure. -+ * -+ * Revision 1.3 1996/02/27 02:28:31 mwg -+ * Fixed a bug in kLapmLongADPEnabled definition. -+ * -+ * Revision 1.2 1996/02/19 23:50:59 liang -+ * Removed compressionSetup parameter from the link layer command structure. -+ * -+ * Revision 1.1.1.1 1996/02/14 02:35:13 mwg -+ * Redesigned the project directory structure. Merged V.34 into the project. -+ * -+ * Revision 1.5 1996/01/15 23:26:04 liang -+ * Change the softmodem command structure name from SoftwareModemCommand -+ * to SoftwareModemCommandParameters. -+ * -+ *****************************************************************************/ -+#ifndef SoftModemPh -+#define SoftModemPh -+ -+/****************************************************************************/ -+/* 1. Type definitions. */ -+/* */ -+/* 1.1 General types */ -+/****************************************************************************/ -+ -+#ifndef SM_DECL -+#define SM_DECL -+#endif -+ -+#ifdef __VxWORKS__ -+#include -+#endif -+ -+#ifdef DEBUG -+/* We have to define __wchar_t for Linux */ -+#if defined __linux__ && !defined _NO_WHCAR_DEF_ -+typedef long int __wchar_t; -+#endif -+#if !defined(__KERNEL__) && !defined(_CFE_) -+#include -+#include -+#endif -+ -+#if defined(__linux__) || defined (__unix__) || defined (__unix) || (defined (__mips__) && !defined(_CFE_) && !defined(VXWORKS) && !defined(TARG_OS_RTEMS))/* enable if necessary, but not for dos-based builds */ -+#include -+#endif -+ -+ -+#endif /* DEBUG */ -+ -+#if defined(W95_DRIVER) -+#pragma code_seg("_LTEXT", "LCODE") -+#pragma data_seg("_LDATA", "LCODE") -+#pragma const_seg("_LDATA", "LCODE") -+#pragma bss_seg("_LDATA", "LCODE") -+#pragma pack(1) -+#endif /* W95_DRIVER */ -+ -+#ifndef SoftModemTypes -+#include "SoftModemTypes.h" -+#endif /* SoftModemTypes */ -+ -+ -+typedef struct -+ { -+ schar x, y; -+ } ComplexByte; -+ -+typedef struct -+ { -+ uchar numerator; -+ uchar denominator; -+ } Ratio; -+ -+#ifdef PEGASUS -+typedef union -+ { -+ struct -+ { -+ short x, y; -+ }; -+ -+ long foo; -+ } ComplexShort; -+#else -+typedef struct -+ { -+ short x, y; -+#ifdef GREENHILL -+ long a[0]; -+#endif -+ } ComplexShort; -+#endif -+ -+typedef struct -+ { -+ long x, y; -+ } ComplexLong; -+ -+typedef struct -+ { -+ ushort x0, x1, x2; -+ short x3; -+ } VeryLong; -+ -+typedef union -+ { -+ struct -+ { -+ uchar number; -+ uchar defaultValue; /* default value */ -+ uchar maxValue; /* max allowed value */ -+ uchar minValue; /* should be greater then maxValue to make reg readonly */ -+ } param; -+ long alignment; -+ } SRegisterDefinition; -+ -+#define MacroPaste2(a,b) a##b -+#define MacroPaste(a,b) MacroPaste2(a,b) -+#define ALWAYS_LONG_ALIGN() long MacroPaste(ALIGNMENT,__LINE__); -+ -+#ifdef USE_LONG_ALIGN -+#define LONG_ALIGN() ALWAYS_LONG_ALIGN() -+#else -+#define LONG_ALIGN() -+#endif -+ -+typedef ulong bitMap; -+ -+typedef int pace; -+#define kStop 0 -+#define kVerySlow 1 -+#define kSlow 2 -+#define kMedium 3 -+#define kFast 4 -+ -+ -+/****************************************************************************/ -+/* 1. Type definitions. */ -+/* */ -+/* 1.2 Modem specific types */ -+/****************************************************************************/ -+ -+typedef long directionType; -+#define kXmt 0 -+#define kRcv 1 -+#define kXmtRcv 2 -+ -+ -+#define originating kXmt -+#define answering kRcv -+#define kOrg kXmt -+#define kAns kRcv -+#define kOrgAns kXmtRcv -+ -+#define ORIGINATING originating -+#define ANSWERING answering -+ -+typedef int pcmCodingType; -+#define kMuLawPCM 0 -+#define kALawPCM 1 -+ -+#define kMuLawPCMScaleShift 2 -+#define kALawPCMScaleShift 3 -+ -+/* link layer and framer share defines */ -+typedef bitMap framerType; -+typedef bitMap linkLayerType; -+#define kNoFramer 0 -+#define kSync 0x00000001 -+#define kAsync 0x00000002 -+#define kHDLC 0x00000004 -+#define kLapm 0x00000008 -+#define kMnp 0x00000010 -+#define kV70 0x00000020 -+#define kSAM 0x00000040 -+ -+ -+typedef bitMap modulationMap; -+typedef bitMap symbolRateMap; -+typedef bitMap dataRateMap; -+typedef bitMap featureMap; -+typedef bitMap breakType; -+ -+typedef bitMap audioType; -+#define kRawAudio 0 -+#define kAudioG729A 1 -+#define kAudioG729 2 -+#define kAudioG723 3 -+ -+ -+#ifndef ADSL_MODEM -+typedef long modemStatusCode; -+#endif -+ /* Information status Codes: 1-31 */ -+#define kSetSampleRate 1 -+#define kModulationKnown 2 -+#define kRxSymbolRate 3 -+#define kTxSymbolRate 4 -+#define kRxCarrierFreq 5 -+#define kTxCarrierFreq 6 -+#define kTxPreemphasisFilter 7 -+#define kTxPowerAdjustment 8 -+#define kRemoteTxPreemphasisFilter 9 -+#define kRemoteTxPowerAdjustment 10 -+#define kRxRateKnown 11 -+#define kTxRateKnown 12 -+#define kRxDataModeActive 13 -+#define kTxDataModeActive 14 -+#define kTxSignalCompleted 15 -+#define kDTMFSignalDetected 16 -+#define kModemSignalDetected 17 -+#define kCallProgressSignalDetected 18 -+#define kCustomSignalDetected 19 -+#define kFaxPreambleDetected 20 -+#define kV24CircuitStatusChange 21 -+#define kHookStateChange 22 -+#define kCallWaitingToneDetected 23 -+#define kMultiToneSignalDetected 24 -+#define kPulseShuntStateChange 25 -+#define kRingFrequency 26 -+ -+ -+ /* Warning status Codes: 32-64 */ -+#define kError 32 -+#define kV34Exception 33 -+#define kClearDownLocal 34 -+#define kClearDownRemote 35 -+#define kCarrierPresent 36 -+#define kCarrierLost 37 -+#define kRetrainingLocal 38 -+#define kRetrainingRemote 39 -+#define kRateRenegotiationLocal 40 -+#define kRateRenegotiationRemote 41 -+#define kFallbackStarted 42 -+#define kFallForwardStarted 43 -+#define kCleardownStarted 44 -+#define kIllegalCommand 45 -+ -+ /* Auxiliary status Codes: 64-.. */ -+#define kTrainingProgress 64 -+#define kConnectionInfo 65 -+#define kDialerStatus 66 -+#define kFramingInfo 67 -+#define kBreakReceived 68 -+#define kLapmStatus 69 -+#define kLapmParameter 70 -+#define kV42bisStatus 71 -+#define kCallerIDStatus 72 -+#define kIOStatus 73 -+#define kCapabilitiesStatus 74 -+#define kSpeakerStatus 75 -+#define kATProfileChanged 76 -+#define kATDebugStatus 77 -+#define kResetHardware 78 -+#define kV8bisStatus 79 -+#define kMnpStatus 80 -+#define kMnpParameter 81 -+#define kV70Status 82 -+#define kV70Parameter 83 -+#define kFaxClass2Status 84 -+#define kAudioStatus 85 -+#define kAudioParameter 86 -+#define kOverlayStatus 87 -+#define kCallerIDCircuitStatus 88 -+#define kV80Status 89 -+#define kV80Parameter 90 -+#define kLocalCountryChanged 91 -+#define kDTERateChanged 92 -+#define kATResponse 93 -+#define kFramerConfigured 94 -+#define kA8RStatus 95 -+#define kA8TStatus 96 -+#define kVersionStatus 97 -+ -+ /* Testing status codes: 128-... */ -+ /* These statuses are generated by modem test suit */ -+#define kTestFinished 128 -+#define kConnectivityTestFinished 129 -+#define kTestCheckSum 130 -+#define kLogFileControl 131 -+#define kTestAtmVcFinished 132 -+#define kTestClearEocFinished 133 -+#define kTestG997Finished 134 -+ -+typedef long modemErrorCode; -+#define kNoError 0 -+#define kErrorTimerExpired 1 -+#define kErrorNoSReceived 2 -+#define kErrorNoSbarReceived 3 -+ -+ -+typedef long dialerStatusCode; -+#define kDialCompleted 0 -+#define kNoDialToneDetected 1 -+#define kBongToneDetected 2 -+#define kNoBongToneDetected 3 -+#define kErrorIllegalDialModifier 5 -+#define kDialStarted 6 -+#define kExternalPulseDialDigit 7 -+ -+ -+typedef long framingInfoCode; -+#define kRxFrameOK 0 -+#define kRxFrameTooLong 1 -+#define kRxFrameCRCError 2 -+#define kTxFrameUnderrun 3 -+#define kRxFrameOverrun 4 -+#define kRxFrameAborted 5 -+#define kRxFrameParityError 6 -+#define kRxFrameFormatError 7 -+#define kRxFrameHDLCFlagsDetected 8 -+ -+ -+typedef long IOStatusCode; -+#define kRxDataReady 0 -+#define kRxBufferOverflow 1 -+#define kTxSpaceAvailable 2 -+#define kTxBufferEmpty 3 -+ -+typedef long capabilitiesStatusCode; -+#define kSymbolRates 0 -+#define kDataRates 1 -+#define kFeatures 2 -+#define kDemodCapabilities 3 -+#define kRateThresholdAdjustment 4 -+#define kXmtLevel 5 -+#define kHybridDelay 6 -+#define kAuxFeatures 7 -+ -+ -+typedef long A8TStatusCode; -+#define kA8TFinished 0 -+ -+typedef long callerIDStatusCode; -+#define kCallerIDError 0 -+#define kCallerIDChannelSeizureReceived 1 -+#define kCallerIDMarkSignalReceived 2 -+#define kCallerIDTime 3 -+#define kCallerIDTelnum 4 -+#define kCallerIDName 5 -+#define kCallerIDEnd 6 -+#define kCallerIDUnknownMessage 7 -+#define kCallerIDWholeMessage 8 -+ -+ -+typedef long callerIDErrorCode; -+#define kCallerIDNoError 0 -+#define kCallerIDMarkSignalError 1 -+#define kCallerIDTooManyMarkBits 2 -+#define kCallerIDMessageTooLong 3 -+#define kCallerIDChecksumError 4 -+ -+ -+typedef long connectionInfoCode; -+#define kRTDelay 1 -+#define kRxSignalLevel 2 -+#define kTimingOffset 3 -+#define kFreqOffset 4 -+#define kPhaseJitter 5 -+#define kSNR 6 -+#define kNearEchoLevel 7 -+#define kSER 8 -+#define kNearEndDelay 9 -+#define kFarEchoLevel 10 -+#define kL1L2SNRDifference 11 -+#define kDCOffset 12 -+#define kTotalRxPower 13 -+#define kRemoteFreqOffset 14 -+/* obsolete #define kV8MenuDataWord1 15 */ -+/* obsolete #define kV8MenuDataWord2 16 */ -+#define kPCMP2AnalogDetSNR 17 -+#define kPCMP2DigitalDetSNR 18 -+#define kPCMP2RBSDetSNR 19 -+#define kEqCenterTapOffset 20 -+#define kPCMPadValue 21 -+#define kPCMRBSMap 22 -+#define kPCMCodingType 23 -+#define kPCMSpectralShapingBits 24 -+#define kLoopbackSelfTestResult 25 -+#define kEyeQuality 26 -+#define kLoopbackSelfTestNewErrs 27 -+#define kV34EqlLengthStatus 28 -+#define kV34EqlOffsetStatus 29 -+#define kV8CallMenuData 30 -+#define kV8JointMenuData 31 -+#define kPCMClientIeecLengthStatus 32 -+#define kPCMClientIeecOffsetStatus 33 -+#define kSeamlessRateChange 34 -+ -+typedef long trainingProgressCode; -+#define kPeriodicalSignalDetected 0 -+#define kPhaseReversalDetected 1 -+#define kSignalStartDetected 2 -+#define kSignalEndDetected 3 -+#define kSSignalDetected 4 -+#define kSbarSignalDetected 5 -+#define kJ4SignalDetected 6 -+#define kJ16SignalDetected 7 -+#define kJprimeSignalDetected 8 -+#define kMPSignalDetected 9 -+#define kMPprimeSignalDetected 10 -+#define kMPSignalSent 11 -+#define kMPprimeSignalSent 12 -+#define kRateSignalDetected 13 -+#define kESignalDetected 14 -+#define kRateSignalSent 15 -+ -+#define kAutomodingTryModulation 16 -+#define kAutomodingCompleted 17 -+#define kRCFaxBitMapStatus 18 -+ -+#define kV8CIDetected 19 -+#define kV8ANSToneDetected 20 -+#define kV8ANSamDetected 21 -+#define kV8CMDetected 22 -+#define kV8JMDetected 23 -+#define kV8CJDetected 24 -+#define kV8Finished 25 -+ -+#define kV34Phase2Started 26 -+#define kV34Phase2INFOSequenceDetected 27 -+#define kV34Phase2NearEndEchoDetected 28 -+#define kV34Phase2L1Receiving 29 -+#define kV34Phase2L2Receiving 30 -+#define kV34Phase2Finished 31 -+#define kV34Phase3Started 32 -+#define kV34Phase3Finished 33 -+#define kV34Phase4Started 34 -+#define kV34Phase4Finished 35 -+#define kV34DecoderParameters 36 -+#define kV34EncoderParameters 37 -+ -+#define kMaxLocalRxDataRate 38 -+#define kMaxLocalTxDataRate 39 -+#define kMaxRemoteRxDataRate 40 -+#define kMaxRemoteTxDataRate 41 -+#define kProjectedDataRate 42 -+#define kFEECDeactivated 43 -+#define kIEECDeactivated 44 -+#define kPFEECDeactivated 45 -+#define kPhaseJitterDeactivated 46 -+ -+#define kPCMP2DetectedDigitalConnection 47 -+#define kPCMP2DetectedRBS 48 -+#define kX2DetectedPhase1Escape 49 -+ -+#define kStarted1200BpsTraining 50 -+#define kStarted2400BpsTraining 51 -+#define kUnscrambledOneDetected 52 -+#define kScrambled1200BpsOneDetected 53 -+#define kScrambled2400BpsOneDetected 54 -+#define kV22BisS1Detected 55 -+#define kV22InitiateLoop2Test 56 -+#define kV22RespondLoop2Test 57 -+#define kV22Loop2TestAlt01Detected 58 -+ -+#define kDataModemLoop1TestStarted 59 -+#define kDataModemLoop1TestFinished 60 -+#define kDataModemLoop2TestStarted 61 -+#define kDataModemLoop2TestFinished 62 -+#define kDataModemLoop3TestStarted 63 -+#define kDataModemLoop3TestFinished 64 -+#define kDataModemSelfLoopTestEnabled 65 -+ -+#define kPCMPhase3Started 70 -+#define kPCMPhase3Finished 71 -+#define kPCMPhase4Started 72 -+#define kPCMPhase4Finished 73 -+ -+#define kV90JaSignalDetected 74 -+#define kV90JdSignalDetected 75 -+#define kV90JdPrimeSignalDetected 76 -+#define kV90RSignalDetected 77 -+#define kV90RBarSignalDetected 78 -+#define kV90CPSignalDetected 79 -+ -+#define kV90CPtSignalSent 80 -+#define kV90CPSignalSent 81 -+#define kV90CPprimeSignalSent 82 -+ -+ -+#define kV34SeamlessRateChangeRequestSent 83 -+#define kV34SeamlessRateChangeUpdateSent 84 -+#define kV34SeamlessRateChangeRequestReceived 85 -+#define kV34SeamlessRateChangeUpdateReceived 86 -+#define kV34SeamlessRateChangeUpdateTimeout 87 -+ -+#define kV90JaSignalAcknowledged 88 -+ -+#define kV34HCtrlChanPPhDetected 100 -+#define kV34HCtrlChanMPhDetected 101 -+#define kV34HCtrlChanRatesKnown 102 -+#define kV34HDXCtrlChanBinary1Detected 103 -+#define kV34HDXPhase3Started 104 -+#define kV34HDXPhase3Finished 105 -+#define kV34HDXPrimChanBinary1Detected 106 -+#define kFlexEventTRN2AFinished 107 -+ -+#define kV32RanginigStarted 108 -+#define kV32RangingStarted 108 -+#define kV32RanginigFinished 109 -+#define kV32RangingFinished 109 -+ -+ -+typedef long lapmStatusCode; -+#define kLapmDisconnected 0 /* LAPM disconnected */ -+#define kLapmConnected 1 /* LAPM is connected */ -+#define kLapmV42ODPDetected 2 /* LAPM ODP is detected */ -+#define kLapmV42ADPDetected 3 /* LAPM V.42 ADP is detected */ -+#define kLapmUnknownADPDetected 4 /* LAPM Unsupported ADP is detected */ -+#define kLapmTimeout 5 /* LAPM Timeout */ -+#define kLapmMNPFrameDetected 6 /* LAPM detected MNP frame */ -+#define kLapmDPDetectionTimedOut 7 /* LAPM Unsupported ADP is detected */ -+#define kLapmError 8 /* LAPM Error */ -+#define kLapmTestResult 9 /* LAPM loopback test result */ -+#define kLapmTxFrameStatus 10 -+#define kLapmRxFrameStatus 11 -+#define kLapmTxStatistics 12 -+#define kLapmRxStatistics 13 -+ -+typedef long lapmTakedownReason; -+#define kLapmRemoteDisconnect 0 -+#define kLapmLocalDisconnect 1 -+#define kLapmCannotConnect 2 -+#define kLapmProtocolError 3 -+#define kLapmCompressionError 4 -+#define kLapmInactivityTimer 5 -+#define kLapmRetryFailed 6 -+ -+ -+typedef long lapmParameterCode; -+#define kLapmXmtK 0 -+#define kLapmRcvK 1 -+#define kLapmXmtN401 2 -+#define kLapmRcvN401 3 -+#define kLapmTESTSupport 4 -+#define kLapmSREJSupport 5 -+#define kLapmCompDir 6 -+#define kLapmCompDictSize 7 -+#define kLapmCompStringSize 8 -+ -+ -+typedef long lapmErrorCode; -+#define kLapmNoError 0 -+#define kLapmBufferOverflow 1 -+#define kLapmFrameTooLong 2 -+#define kLapmBadFrame 3 -+#define kLapmUnknownEvent 4 -+/* 6 is reserved for kLapmRetryFailed defined above */ -+ -+ -+typedef long lapmTestResultCode; -+#define kLapmTestPassed 0 -+#define kLapmTestRequestIgnored 1 -+#define kLapmTestAlreadyInProgress 2 -+#define kLapmTestNotSupported 3 -+#define kLapmTestFailed 4 -+ -+ -+typedef long v42bisStatusCode; -+#define kV42bisEncoderTransparentMode 0 /* V.42bis encoder transparent mode active */ -+#define kV42bisEncoderCompressedMode 1 /* V.42bis encoder compressed mode active */ -+#define kV42bisDecoderTransparentMode 2 /* V.42bis decoder transparent mode active */ -+#define kV42bisDecoderCompressedMode 3 /* V.42bis decoder compressed mode active */ -+#define kV42bisError 4 /* V.42bis error */ -+#define kV42bisEncoderStatistics 5 -+#define kV42bisDecoderStatistics 6 -+ -+ -+typedef long v42bisErrorCode; -+#define kV42bisUndefinedEscSequence 0 /* V.42bis undefined escape sequence */ -+#define kV42bisCodewordSizeOverflow 1 /* V.42bis codeword size overflow */ -+#define kV42bisUndefinedCodeword 2 /* V.42bis undefined codeword */ -+ -+typedef long mnpStatusCode; -+#define kMnpDisconnected 0 /* Mnp disconnected */ -+#define kMnpConnected 1 /* Mnp is connected */ -+#define kMnpFallback 2 /* Mnp is falling back to buffer mode */ -+#define kMnpError 3 /* Mnp Error */ -+#define kMnpTimeout 4 /* Mnp Timeout */ -+#define kMnpInvalidLT 5 /* Invalid LT received */ -+#define kMnpRetransmitFrame 6 -+#define kMnpNack 7 -+#define kMnpTxFrameStatus 8 -+#define kMnpRxFrameStatus 9 -+#define kMnpTxStatistics 10 -+#define kMnpRxStatistics 11 -+ -+typedef long mnpTakedownReason; -+#define kMnpRemoteDisconnect 0 -+#define kMnpLocalDisconnect 1 -+#define kMnpCannotConnect 2 -+#define kMnpProtocolError 3 -+#define kMnpCompressionError 4 -+#define kMnpInactivityTimer 5 -+#define kMnpRetryFailed 6 -+ -+ -+typedef long mnpParameterCode; -+#define kMnpProtocolLevel 0 -+#define kMnpServiceClass 1 -+#define kMnpOptimizationSupport 2 -+#define kMnpCompressionSupport 3 -+#define kMnpN401 4 -+#define kMnpK 5 -+ -+ -+typedef long mnpErrorCode; -+#define kMnpNoError 0 -+#define kMnpBufferOverflow 1 -+#define kMnpFrameTooLong 2 -+#define kMnpBadFrame 3 -+#define kMnpUnknownEvent 4 -+ -+ -+typedef long v70StatusCode; -+#define kV70Disconnected 0 /* V70 disconnected */ -+#define kV70Connected 1 /* V70 is connected */ -+#define kV70Error 2 /* V70 Error */ -+#define kV70Timeout 3 /* V70 Timeout */ -+#define kV70ChannelDown 4 /* V70 channel released */ -+#define kV70ChannelUp 5 /* V70 channel established */ -+#define kV70AudioChannelDown 6 /* V70 audio channel released */ -+#define kV70AudioChannelUp 7 /* V70 audio channel established */ -+#define kV70DataChannelDown 8 /* V70 data channel released */ -+#define kV70DataChannelUp 9 /* V70 data channel established */ -+#define kV70OOBChannelDown 10 /* V70 out-of-band channel released */ -+#define kV70OOBChannelUp 11 /* V70 out-of-band channel established */ -+#define kV70TxFrameStatus 12 -+#define kV70RxFrameStatus 13 -+#define kV70TxStatistics 14 -+#define kV70RxStatistics 15 -+#define kV70StateTransition 16 -+ -+typedef long v70TakedownReason; -+#define kV70RemoteDisconnect 0 -+#define kV70LocalDisconnect 1 -+#define kV70CannotConnect 2 -+#define kV70ProtocolError 3 -+#define kV70CompressionError 4 -+#define kV70InactivityTimer 5 -+#define kV70RetryFailed 6 -+ -+ -+typedef long v70ParameterCode; -+#define kV70SuspendResume 0 -+#define kV70CrcLength 1 -+#define kV70NumberOfDLCs 2 -+#define kV70uIH 3 -+ -+#define kV70LapmXmtK 10 -+#define kV70LapmRcvK 11 -+#define kV70LapmXmtN401 12 -+#define kV70LapmRcvN401 13 -+#define kV70LapmTESTSupport 14 -+#define kV70LapmSREJSupport 15 -+#define kV70LapmCompDir 16 -+#define kV70LapmCompDictSize 17 -+#define kV70LapmCompStringSize 18 -+ -+#define kV70AudioHeader 20 /* if audio header is present in audio frames */ -+#define kV70BlockingFactor 21 /* audio blocking factor (default 1) */ -+#define kV70SilenceSuppression 22 /* audio silence suppression */ -+ -+ -+ -+typedef long v70ErrorCode; -+#define kV70NoError 0 -+#define kV70BadFrame 1 -+ -+typedef long audioStatusCode; -+#define kAudioFramesLost 0 /* One or more audio frames were lost */ -+#define kAudioTxBufferOverflow 1 -+#define kAudioRxBufferOverflow 2 -+#define kAudioRxBufferUnderflow 3 -+ -+ -+typedef long v80StatusCode; -+#define kV80Disconnected 0 /* V80 disconnected */ -+#define kV80Connected 1 /* V80 is connected */ -+#define kV80Error 2 /* V80 Error */ -+#define kV80InBandStatus 3 /* V80 in-band SAM status */ -+#define kV80TxFrameStatus 12 -+#define kV80RxFrameStatus 13 -+#define kV80TxStatistics 14 -+#define kV80RxStatistics 15 -+ -+typedef long v80TakedownReason; -+#define kV80RemoteDisconnect 0 -+#define kV80LocalDisconnect 1 -+ -+typedef long v80ErrorCode; -+#define kV80NoError 0 -+#define kV80BadFrame 1 -+ -+typedef long overlayStatusCode; -+#define kOverlayBegin 0 /* DSP has halted */ -+#define kOverlayEnd 1 /* DSP has received entire overlay */ -+#define kOverlayElapsedTime 2 /* time elapsed(as viewed by datapump) during overlay */ -+#define kOverlayRecordingData 3 /* ms of data that we are recording */ -+#define kOverlayReplayingData 4 /* ms of data that we have replayed so far */ -+#define kOverlayReplayDone 5 /* playback is done */ -+ -+/* types for kOverlayRecording/ReplayingData */ -+#define kOverlayTxData 0 -+#define kOverlayRxData 1 -+ -+/* -+ * Rockwell faxmodem compatible bitmap (kRCFaxBitMapStatus) -+ */ -+#define kRCFaxFCD 0x01 -+#define kRCFaxP2 0x02 -+#define kRCFaxPN 0x04 -+#define kRCFaxDCD 0x08 -+#define kRCFaxTX 0x10 -+#define kRCFaxCTS 0x20 -+ -+ -+#ifndef ADSL_MODEM -+typedef long modemCommandCode; -+#endif -+ /* Basic Action commands 00-63 */ -+#define kIdleCmd 0 -+#define kStartFaxModemCmd 1 -+#define kStartDataModemCmd 2 -+#define kStartCallProgressMonitorCmd 3 -+#define kSendTonesCmd 4 -+#define kStartCallerIDRcvCmd 5 -+#define kSetLinkLayerCmd 6 -+#define kSetFramerCmd 7 -+#define kTestLinkLayerCmd 8 -+#define kIdleRcvCmd 9 -+#define kIdleXmtCmd 10 -+#define kSetStatusHandlerCmd 11 -+#define kSetEyeHandlerCmd 12 -+#define kSetLogHandlerCmd 13 -+#define kSendBreakCmd 14 -+#define kSendTestCmd 15 -+#define kDisconnectLinkCmd 16 -+#define kSetXmtGainCmd 17 -+#define kStartADSICmd 18 -+#define kSetHybridDelayCmd 19 -+#define kCleardownCmd 20 -+#define kInitiateRetrainCmd 21 -+#define kInitiateRateRenegotiationCmd 22 -+#define kDialToneIndicator 23 -+#define kSetRxDataHandler 24 /* not used yet */ -+#define kSetTxDataHandler 25 /* not used yet */ -+#define kSetAuxRxDataHandler 26 -+#define kSetAuxTxDataHandler 27 -+#define kRingIndicatorCmd 28 -+#define kDTERateIndicatorCmd 29 -+#define kStartV8bisCmd 30 -+#define kSendMultiTonesCmd 31 -+#define kSetMultiToneParamsCmd 32 -+#define kSetModemSampleRateCmd 33 -+#define kStartDataModemPTTTestCmd 34 -+#define kStartDataModemLoopbackTestCmd 35 -+#define kRingFrequencyCmd 36 -+#define kSetCallWaitingDetectorStateCmd 37 -+#define kV34HDXTurnOffCurrentModeCmd 38 -+#define kSetAudioCmd 39 -+#define kLoopbackTestAutoRespEnableCmd 40 -+#define kSetCallProgressParamsCmd 41 -+#define kSetTrainingDelayReductionCmd 42 -+#define kSetFaxECMPageBufferPtrCmd 43 -+#define kSetLineCurrentStateCmd 44 -+#define kSetFramerParameterCmd 45 -+#define kStartDozeCmd 46 -+#define kEndDozeCmd 47 -+#define kStartRingFrequencyDetectorCmd 48 -+#define kSetBufferingDelayAdjustmentCmd 49 -+ -+ /* Composite action commands 64-127 */ -+#define kDialCmd 64 -+#define kSendCallingToneCmd 65 -+#define kV24CircuitChangeCmd 66 -+#define kStartATModeCmd 67 -+#define kStopATModeCmd 68 -+#define kSetATRegister 69 -+#define kSetATRegisterLimits 70 -+#define kSetATIResponse 71 -+#define kEnableATDebugMode 72 -+#define kSetWhiteListEntry 73 -+#define kSetBlackListEntry 74 -+ -+#define kV70Setup 75 /* additional V70 configuration */ -+#define kEstablishChannel 76 /* Establish new link layer channel (V70) */ -+#define kReleaseChannel 77 /* Release link layer channel (V70) */ -+#define kWaitChannelEstablished 78 /* Wait for establishment of the new link layer channel (V70) */ -+ -+/* unused 79 */ -+#define kMnpOOBFrameCmd 80 -+#define kV80InBandCmd 81 /* V80 In-band commands */ -+#define kSetV250IdString 82 -+#define kSetInternationalTablesCmd 83 -+#define kConfigureCountryCmd 84 -+#define kConigureCountryCmd 84 -+#define kV8ControlCmd 85 -+#define kV8bisSendMessage 86 -+#define kSetHWIdCmd 87 -+#define kSetCodecIdCmd 88 -+#define kOverCurrentDetected 89 -+ -+ -+ -+typedef long v8ControlType; -+#define kEnableDTEControl 1 -+#define kSetV8ControlTimeout 2 -+#define kSetCIValue 3 -+#define kSetCMValue 4 -+#define kSetJMValue 5 -+#define kSendCJ 6 -+#define kSetCallFunctionCategory 7 -+ -+typedef long v250IdStringCode; -+#define kGMIString 1 -+#define kGMMString 2 -+#define kGMRString 3 -+#define kGSNString 4 -+#define kGOIString 5 -+ -+typedef long kCallProgressParameterCode; -+#define kModemSignalPowerThreshold 1 -+#define kDialtonePowerThreshold 2 -+#define kRingBackPowerThreshold 3 -+#define kBusyPowerThreshold 4 -+#define kReorderPowerThreshold 5 -+#define k2ndDTnPowerThreshold 6 -+#define kMinDialtoneTime 7 -+#define kDialtoneFreqRange 8 -+#define kRingBackFreqRange 9 -+#define kBusyFreqRange 10 -+#define kReorderFreqRange 11 -+#define k2ndDTnFreqRange 12 -+ -+ -+typedef long framerParameterCode; -+#define kSetHDLCLeadingFlags 0 -+#define kHDLCResetFlagDetection 1 -+#define kSyncFramerSetup 2 -+#define kHDLCSendCRC 3 -+#define kHDLCSendFlags 4 -+#define kHDLCSendAborts 5 -+ -+ -+typedef long logDataCode; -+#define eyeData 0 -+#define mseData 1 -+#define rxData 2 -+#define txData 3 -+#define neecData 4 -+#define eqlData 5 -+#define ieecData 6 -+#define feecData 7 -+#define eqlPllData 8 -+#define feecPllData 9 -+#define timingData 10 -+#define pjPhaseErrData 11 -+#define pjEstimateData 12 -+#define pjEstDiffData 13 -+#define pjCoefData 14 -+#define inputSignalData 15 -+#define outputSignalData 16 -+#define agcGainData 17 -+#define automoderData 18 -+#define v8CMData 19 -+#define v8JMData 20 -+#define inputAfterNeecData 21 -+#define eqlErrData 22 -+#define dpskMicrobitsData 23 -+#define v34P2LSamplesData 24 -+#define phaseSplittedLData 25 -+#define fftedLData 26 -+#define channelSNRData 27 -+#define noiseEstimateData 28 -+#define signalEstimateData 29 -+#define v34INFOData 30 -+#define v34ChanProbData 31 -+#define v34P2OutputData 32 -+#define v8ANSamDetectData 33 -+#define pFeecData 34 -+#define channelDelayData 35 -+#define timingOffsetData 36 -+#define trellisMSEData 37 -+#define interpolatedSignalData 38 -+#define dcCancelledSignalData 39 -+#define echoCancelledSignalData 40 -+#define predictorErrData 41 -+#define commandInfoData 42 -+#define unusedInfoData 43 -+#define atCommandInfoData 44 -+#define atResponseInfoData 45 -+#define hwTerminalTxData 46 -+#define hwTerminalRxData 47 -+#define statusInfoData 48 -+#define channelResponseData 49 -+#define channelImpulseRespData 50 -+#define x2PcmP1DetectorInData 51 -+#define x2PcmP1DetectorOutData 52 -+#define eqlRealData 53 -+#define ieecRealData 54 -+#define neecOutputData 55 -+#define precodedEqlOutputData 56 -+#define eqlRealErrData 57 -+#define idealEqlOutputData 58 -+#define agcData 59 -+#define pcmInfidelityData 60 -+#define v42bisCycleCount 61 -+#define pcmImdOffsetCoefData 62 -+#define pcmImdOffsetData 63 -+#define v90RcvdDilLongData 64 -+#define v90RcvdDilShortData 65 -+#define v90DilProducedData 66 -+#define pcmEncoderKbitsData 67 -+#define pcmEncoderMbitsData 68 -+#define pcmEncoderSbitsData 69 -+#define pcmDecoderKbitsData 70 -+#define pcmDecoderMbitsData 71 -+#define pcmDecoderSbitsData 72 -+#define v90CPorCPtData 73 -+#define mnpDecoderInputData 74 -+#define mnpDecoderOutputData 75 -+#define v42bisEncoderInputData 76 -+#define v42bisDecoderInputData 77 -+#define modulatorInputData 78 -+#define modulatorOutputData 79 -+#define encodedStatusData 80 -+#define blockFramerTxData 81 -+#define blockFramerRxData 82 -+#define framerTxData 83 -+#define framerRxData 84 -+#define dpskBasebandData 85 -+#define dpskBasebandLPFedData 86 -+#define dpskRealData 87 -+#define bandEdgeCorrectedSignalData 88 -+#define atmLogData 89 -+#define clearEocLogData 90 -+#define g997LogData 91 -+ -+ -+#define kLogDataDelimiter 0xFEFEFEFE -+ -+/****************************************************************************/ -+/* 1. Type definitions. */ -+/* */ -+/* 1.3 Handlers */ -+/****************************************************************************/ -+ -+typedef void (SM_DECL *rcvHandlerType) (void *gDslVars, int, short*); -+typedef void (SM_DECL *xmtHandlerType) (void *gDslVars, int, short*); -+typedef int (SM_DECL *xmtHandlerWithRtnValType) (void *gDslVars, int, short*); -+typedef void (SM_DECL *timerHandlerType) (void *gDslVars, long); -+typedef int (SM_DECL *interpolatorHandlerType) (void *gDslVars, int, short*, short*); -+typedef void (SM_DECL *controlHandlerType) (void *gDslVars, int); -+ -+typedef int (SM_DECL *txDataHandlerType) (void *gDslVars, int, uchar*); -+typedef int (SM_DECL *rxDataHandlerType) (void *gDslVars, int, uchar*); -+ -+typedef bitMap (SM_DECL *signalDetectorType) (void *gDslVars, int, long, long*); -+ -+ -+typedef void (SM_DECL *hookHandlerType) (void *gDslVars, Boolean); -+ -+typedef short* (SM_DECL *sampBuffPtrType) (void *gDslVars, int); -+ -+typedef void (SM_DECL *eyeHandlerType) (void *gDslVars, int, ComplexShort*); -+typedef void (SM_DECL *logHandlerType) (void *gDslVars, logDataCode, ...); -+ -+typedef void (SM_DECL *voidFuncType) (void *gDslVars); -+ -+typedef int (SM_DECL *txAudioHandlerType) (void *gDslVars, int, short*); -+typedef int (SM_DECL *rxAudioHandlerType) (void *gDslVars, int, short*); -+ -+ -+/****************************************************************************/ -+/* 1. Type definitions. */ -+/* */ -+/* 1.4 Structures */ -+/****************************************************************************/ -+ -+/* -+ * AT command processor definitions -+ */ -+#define kATRegistersNumber 56 -+#define kFirstConfigurationRegister 500 -+#define kLastConfigurationRegister 515 -+#define kFirstInternationalRegister 516 -+#define kLastInternationalRegister 595 -+ -+ -+ -+#define kATMaxDialStringSize 128 -+typedef struct -+ { -+ struct -+ { -+ uchar loadNumber; /* Which profile to load upon powerup/reset */ -+ uchar countryCode; /* T.35 Country Code */ -+ uchar profile[2][kATRegistersNumber]; -+ uchar dialString[4][kATMaxDialStringSize + 1]; -+ } config; -+ ulong versionCode; -+ ulong crcCheckSum; -+ } NVRAMConfiguration; -+ -+/* Structure to hold international settings */ -+typedef struct -+ { -+ char *name; -+ int countryCode; -+ const SRegisterDefinition *userRegisters; -+ const ulong *configRegisters; -+ } CountryDescriptor; -+ -+/* -+ * V.34 coding parameters structure -+ */ -+ -+typedef struct -+ { -+ /* DO NOT CHANGE THE ORDER OF FIELDS IN THIS STRUCTURE! -+ * (Some assembly code depends on it!) If you -+ * must add fields, please do so at the bottom. -+ */ -+ -+ int symbolRateIndex, -+ dataRateIndex, -+ userSNRAdjustment; -+ Boolean auxChannel, -+ expConstellation, -+ precoding, -+ nonlinearCoding; -+ schar J, /* number of data frames in superframe */ -+ P, /* number of mapping frames in a data frame */ -+ r, /* number of high mapping frames in a data frame */ -+ b, /* number of data bits in a mapping frame */ -+ W, /* number of aux bits in a data frame */ -+ K, /* number of S bits in a mapping frame */ -+ q, /* number of Q bits in a 2D symbol */ -+ M; /* number of rings in shell mapping */ -+ long nominalVariance; /* the signal variance which gives 1e-2 BLER Q10 */ -+ int bitsPerDataFrame; -+ short quantRoundOff, -+ quantMask; -+ uchar nTrellisStates, -+ log2NTrellisStates; -+ short gain1xmt, -+ gain2xmt, -+ gain1rcv, -+ gain2rcv; -+ ushort bitInversionPattern; -+ } V34CodingParams; -+ -+typedef long v8bisStatusCode; -+typedef bitMap v8bisConnectionSetup; -+#if defined(V8BIS) || defined(AT_COMMANDS_V8BIS) -+#include "V8bisMainTypes.h" -+#endif -+ -+#define kMaxMultiTones 4 /* MultiTone: search for up to this many tones at once */ -+ -+#ifndef ADSL_MODEM -+typedef struct -+ { -+ modemStatusCode code; -+ union -+ { -+ long value; -+ long freq; -+ modemErrorCode error; -+ modulationMap modulation; -+ modulationMap modemSignal; -+ dataRateMap dataRate; -+ long dtmfSignal; -+ bitMap callProgressSignal; -+ bitMap customSignal; -+ void *ptr; -+ struct -+ { -+ long detected; -+ long numTones; -+ long tones[kMaxMultiTones]; -+ } multiToneInfo; -+ struct -+ { -+ v8bisStatusCode code; -+ long value; -+ } v8bisStatus; -+ struct -+ { -+ trainingProgressCode code; -+ long value; -+ } trainingInfo; -+ struct -+ { -+ long code; -+ long value; -+ } v24Circuit; -+ struct -+ { -+ trainingProgressCode code; -+ void* ptr; -+ } advancedTrainingInfo; -+ struct -+ { -+ capabilitiesStatusCode code; -+ long value; -+ } capabilitiesStatusInfo; -+ struct -+ { -+ connectionInfoCode code; -+ long value; -+ } connectionInfo; -+ struct -+ { -+ connectionInfoCode code; -+ int length; -+ uchar *ptr; -+ } advancedConnectionInfo; -+ struct -+ { -+ dialerStatusCode code; -+ long value; -+ long makeTime; -+ long breakTime; -+ } dialerStatus; -+ struct -+ { -+ long enabled; -+ long volume; -+ } speakerStatus; -+ framingInfoCode framingInfo; -+ IOStatusCode ioStatus; -+ struct -+ { -+ lapmStatusCode code; -+ union -+ { -+ long value; -+ lapmTakedownReason reason; -+ lapmErrorCode error; -+ lapmTestResultCode testResult; -+ struct -+ { -+ long length; -+ uchar *framePtr; -+ } frame; -+ struct -+ { -+ long nFrames; -+ long nFrameErrors; -+ } statistic; -+ } param; -+ } lapmStatus; -+ struct -+ { -+ lapmParameterCode code; -+ long value; -+ } lapmParameter; -+ struct -+ { -+ v42bisStatusCode code; -+ union -+ { -+ long value; -+ v42bisErrorCode error; -+ struct -+ { -+ long nBytesIn; -+ long nBytesOut; -+ } statistic; -+ } param; -+ } v42bisStatus; -+ struct -+ { -+ mnpStatusCode code; -+ union -+ { -+ long value; -+ mnpTakedownReason reason; -+ mnpErrorCode error; -+ struct -+ { -+ long nFrames; -+ long nFrameErrors; -+ } statistic; -+ struct -+ { -+ ulong nSize; -+ uchar *Buffer; -+ } fallback; -+ struct -+ { -+ char *header; -+ void *frame; -+ } frame; -+ struct -+ { -+ long nack; -+ long rFrameNo; -+ } timeout; -+ struct -+ { -+ long frameNo; -+ long framesPending; -+ } retrFrame; -+ } param; -+ } mnpStatus; -+ struct -+ { -+ mnpParameterCode code; -+ long value; -+ } mnpParameter; -+ struct -+ { -+ v70StatusCode code; -+ union -+ { -+ long value; -+ v70TakedownReason reason; -+ v70ErrorCode error; -+ struct -+ { -+ long nFrames; -+ long nFrameErrors; -+ } statistic; -+ struct -+ { -+ long length; -+ uchar *framePtr; -+ } frame; -+ struct -+ { -+ long nack; -+ long rFrameNo; -+ } timeout; -+ struct -+ { -+ long frameNo; -+ long framesPending; -+ } retrFrame; -+ struct -+ { -+ long ChannelId; -+ long DLCI; -+ ulong LcNum; -+ v70TakedownReason reason; -+ } channelInfo; -+ struct -+ { -+ long ChannelId; -+ long stateOld; -+ long stateNew; -+ } stateInfo; -+ } param; -+ ulong v70Time; -+ } v70Status; -+ struct -+ { -+ audioStatusCode code; -+ union -+ { -+ long value; -+ struct -+ { -+ long nReq; -+ long nAvail; -+ } buffer; -+ struct -+ { -+ long nFrames; -+ long nFrameErrors; -+ } statistic; -+ struct -+ { -+ long length; -+ uchar *framePtr; -+ } frame; -+ } param; -+ } audioStatus; -+ struct -+ { -+ v80StatusCode code; -+ union -+ { -+ long value; -+ v80TakedownReason reason; -+ v80ErrorCode error; -+ struct -+ { -+ long nFrames; -+ long nFrameErrors; -+ } statistic; -+ struct -+ { -+ long length; -+ uchar *framePtr; -+ } frame; -+ struct -+ { -+ long code; -+ long value; -+ } inBand; -+ } param; -+ ulong v80Time; -+ } v80Status; -+ struct -+ { -+ v70ParameterCode code; -+ long value; -+ } v70Parameter; -+ struct -+ { -+ breakType type; -+ long length; -+ } breakStatus; -+ struct -+ { -+ callerIDStatusCode code; -+ union -+ { -+ long value; -+ struct -+ { -+ callerIDErrorCode code; -+ long value; -+ } callerIDError; -+ struct -+ { -+ long length; -+ char* ptr; -+ } message; -+ } param; -+ } callerIDStatus; -+ struct -+ { -+ ulong signal; -+ uchar *msg1; -+ long msg1Length; -+ uchar *msg2; -+ long msg2Length; -+ } A8RStatus; -+ struct -+ { -+ overlayStatusCode code; -+ long value; -+ long value2; -+ } overlayStatus; -+ struct -+ { -+ ulong nBits; -+ ulong nBlocks; -+ ulong nBitErrors; -+ ulong nBlockErrors; -+ -+ ulong nAudioBits; -+ ulong nAudioBlocks; -+ ulong nAudioSyncErrors; -+ ulong nAudioBlockErrors; -+ } testResults; -+ ulong checksum; -+ struct -+ { -+ ulong sizeM; -+ uchar *filename; -+ } logFileControlStatus; -+ struct -+ { -+ long direction; -+ long module; -+ long message; -+ long data; -+ } -+ faxClass2Status; -+ -+ } param; -+ } modemStatusStruct; -+ -+typedef void (SM_DECL *statusHandlerType) (void *gDslVars, modemStatusStruct*); -+#endif /* ADSL_MODEM */ -+ -+/****************************************************************************/ -+/* 1. Type definitions. */ -+/* */ -+/* 1.5 Command structure */ -+/****************************************************************************/ -+ -+typedef struct -+ { -+ Boolean remoteModemIsFlex; -+ uchar countryCode; -+ ushort manufacturerId; -+ uchar licenseeId; -+ uchar productCapabilities; -+ Boolean digitalModeFlag; -+ Boolean prototypeFlag; -+ uchar version; -+ } -+FlexV8bisStruct; -+ -+typedef struct -+ { -+ symbolRateMap symbolRates; -+ dataRateMap dataRates; -+ dataRateMap dataRates56k; -+ dataRateMap dataRatesFlex; -+ featureMap features; -+ bitMap auxFeatures; -+ bitMap demodCapabilities; -+ long rateThresholdAdjustment; /* dB Q4 */ -+ FlexV8bisStruct flexRemoteV8bisInfo; -+ } dataPumpCapabilities; -+ -+#ifndef ADSL_MODEM -+typedef struct SoftwareModemCommandParameters -+ { -+ modemCommandCode command; -+ union -+ { -+ long xmtGain; -+ ulong hybridDelayQ4ms; -+ long modemSampleRate; -+ long timeInMs; -+ long state; -+ long freq; -+ NVRAMConfiguration *nvramConfigurationPtr; -+ long enabled; -+ long value; -+ uchar *phoneNumber; -+ uchar *faxECMPageBufferPtr; -+ CountryDescriptor *countryDescriptorTable; -+ struct -+ { -+ dataRateMap dteRate; -+ bitMap format; -+ } dteRateSpec; -+ struct -+ { -+ v8ControlType code; -+ long value; -+ uchar *buffer; -+ } v8ControlSpec; -+ struct -+ { -+ directionType direction; -+ v8bisConnectionSetup setup; -+ void *capPtr; -+ voidFuncType confirmMsFunc; -+ voidFuncType genMsFunc; -+ xmtHandlerWithRtnValType ogmFunc; -+ } v8bisSpec; -+ struct -+ { -+ directionType direction; -+ } ADSISpec; -+ struct -+ { -+ directionType direction; -+ modulationMap modulations; -+ dataPumpCapabilities capabilities; -+ } modeSpec; -+ struct -+ { -+ long time, -+ freq1, -+ freq2, -+ freq3, -+ freq4, -+ mag1, -+ mag2, -+ mag3, -+ mag4; -+ } toneSpec; -+ struct -+ { -+ long signal; -+ uchar *msg1; -+ long msg1Length; -+ uchar *msg2; -+ long msg2Length; -+ long sig_en; -+ long msg_en; -+ long supp_delay; -+ } -+ v8bisMessageSpec; -+ struct -+ { -+ linkLayerType type; -+ bitMap setup; -+ dataRateMap rxDataRate; -+ dataRateMap txDataRate; -+ long rtDelayQ4ms; -+ rxDataHandlerType rxDataHandlerPtr; -+ txDataHandlerType txDataHandlerPtr; -+ } linkLayerSpec; -+ struct -+ { -+ framerType type; -+ bitMap setup; -+ directionType direction; -+ long fill[2]; /* need to match linkLayerSpec */ -+ rxDataHandlerType rxDataHandlerPtr; -+ txDataHandlerType txDataHandlerPtr; -+ } framerSpec; -+ struct -+ { -+ framerParameterCode code; -+ long value; -+ } framerParameterSpec; -+ struct -+ { -+ bitMap callProgressDetectorSetup; -+ signalDetectorType callProgressDetectorPtr; /* if nil, use defaults */ -+ signalDetectorType customDetectorPtr; /* if nil, no custom detector */ -+ } callProgressMonitorSpec; -+ struct -+ { -+ ulong maxTones; /* maximum number of simultaneous tones to detect */ -+ ulong allowableVariance; /* maximum cumulative variance in the eight interpolated frequencies */ -+ ulong totalPowerThreshold; /* ignore complete block if power less than this */ -+ ulong powerShiftThreshold; /* ignore a bin if its power is less than (totalPowerValue >> powerShiftThreshold) */ -+ ulong toneMatchThresholdHz; /* tones within +/- this many Hz of original tone are considered the same tone */ -+ ulong binSeparation; /* ignore tones with a spacing of less than this */ -+ ulong outsideFreqDeviation; /* an individual value in the interpolated array can be up to this many Hz outside of the expected angle range */ -+ } multiToneSpec; -+ struct -+ { -+ uchar *dialString; /* nil limited string for DTMF dialing sequence */ -+ long pulseBreakTime, -+ pulseMakeTime, -+ pulseInterDigitTime, -+ toneDigitTime, -+ toneInterDigitTime, -+ toneLoGroupMag, -+ toneHiGroupMag, -+ flashTime, -+ pauseTime, -+ signalWaitTimeout, -+ blindDialingTimeout; -+ bitMap dialerSetup; -+ bitMap callProgressDetectorSetup; -+ signalDetectorType callProgressDetectorPtr; /* if nil, use defaults */ -+ signalDetectorType customDetectorPtr; /* if nil, no custom detector */ -+ hookHandlerType hookHandlerPtr; /* nil if DTMF dialing specified*/ -+ } dialSpec; -+ struct -+ { -+ long timeOn, -+ timeOff, -+ freq; -+ } callingToneSpec; -+ union -+ { -+ statusHandlerType statusHandlerPtr; -+ eyeHandlerType eyeHandlerPtr; -+ logHandlerType logHandlerPtr; -+ rxDataHandlerType rxDataHandlerPtr; -+ txDataHandlerType txDataHandlerPtr; -+ } handlerSpec; -+ struct -+ { -+ breakType type; -+ long length; -+ } breakSpec; -+ struct -+ { -+ long length; -+ uchar *dataPtr; -+ } lapmTestSpec; -+ struct -+ { -+ bitMap setupLapm; -+ rxDataHandlerType rxAudioHandlerPtr; -+ txDataHandlerType txAudioHandlerPtr; -+ } v70SetupSpec; -+ struct -+ { -+ ulong ChannelId; -+ ulong LogChannelNum; -+ ulong PortNum; -+ } EstChannelSpec; -+ struct -+ { -+ ulong ChannelId; -+ } WaitChannelSpec; -+ struct -+ { -+ ulong ChannelId; -+ ulong LogChannelNum; -+ ulong PortNum; -+ ulong DLCI; -+ } RelChannelSpec; -+ struct -+ { -+ audioType type; -+ bitMap setup; -+ dataRateMap rxAudioRate; -+ dataRateMap txAudioRate; -+ rxAudioHandlerType rxAudioHandlerPtr; -+ txAudioHandlerType txAudioHandlerPtr; -+ } audioSpec; -+ struct -+ { -+ long code; -+ long value; -+ } v24Circuit; -+ struct -+ { -+ ulong code; -+ ulong value; -+ ulong minValue; -+ ulong maxValue; -+ } atRegister; -+ struct -+ { -+ long code; -+ uchar *response; -+ } atiSpec; -+ struct -+ { -+ long length; -+ uchar *framePtr; -+ } frameSpec; -+ struct -+ { -+ long code; -+ union -+ { -+ long value; -+ struct -+ { -+ long loFreq1; -+ long hiFreq1; -+ long loFreq2; -+ long hiFreq2; -+ } freqRange; -+ } params; -+ } callProgressParamSpec; -+ struct -+ { -+ v250IdStringCode v250IdCode; -+ uchar *v250IdString; -+ } v250IdSpec; -+ -+ } param; -+ } modemCommandStruct; -+ -+typedef Boolean (*commandHandlerType) (modemCommandStruct*); -+#endif /* ADSL_MODEM */ -+ -+ -+ -+/****************************************************************************/ -+/* 2. Constant definitions. */ -+/* */ -+/* 2.1 Definitive constants */ -+/****************************************************************************/ -+ -+#define kMaxSampleBlockSize 48 -+#define kMaxDataBlockSize 48 -+ -+#define kMaxDialStringLength 127 -+#define kCallProgressSampleRate 7200 -+ -+#define kMaxCallerIDMessageLength 80 -+ -+/****************************************************************************/ -+/* 2. Constant definitions. */ -+/* */ -+/* 2.2 Bit maps */ -+/****************************************************************************/ -+ -+/* modulationMap */ -+ -+#define kIdle 0x00000000 -+#define kV25 0x00000001 -+#define kV8 0x00000002 -+#define kCid 0x00000004 -+#define kV8bis 0x00000008 -+#define kV21 0x00000010 -+#define kV22 0x00000020 -+#define kV23 0x00000040 -+#define kV32 0x00000080 -+#define kV34 0x00000100 -+#define kX2 0x00000200 -+#define kV90 0x00000400 -+#define k56Flex 0x00000800 -+#define kV27 0x00001000 -+#define kV29 0x00002000 -+#define kV17 0x00004000 -+#define kV34HDX 0x00008000 -+#define kV34HDXC 0x00010000 -+#define kBell103 0x00100000 -+#define kBell212 0x00200000 -+#define kDataCallingTone 0x01000000 -+#define kFaxCallingTone 0x02000000 -+ -+#define kV22FastNZConnect 0x04000000 -+#define kV22FastNNZConnect 0x08000000 -+#define kV22FastConnect (kV22FastNZConnect|kV22FastNNZConnect) -+#define kV22bisFastConnect 0x10000000 -+ -+ -+#define kDataModulations (kV25 | kV8 | kV21 | kV22FastConnect | kV22bisFastConnect | kV22 | kV23 | kV32 | kV34 | kBell103 | kBell212) -+#define kDataOnlyModulations (kV21 | kV22 | kV23 | kV32 | kBell103 | kBell212) -+#define kPCMModulations (kV90 | kX2 | k56Flex) -+ -+#define kFaxModulations (kV25 | kV21 | kV27 | kV29 | kV17) -+#define kFaxOnlyModulations (kV27 | kV29 | kV17) -+#define kFaxModulationShift 12 -+ -+/* symbolRateMap */ -+ -+#define k1200Hz 0x00000001 -+#define k1600Hz 0x00000002 -+#define k2400Hz 0x00000004 -+#define k2743Hz 0x00000008 -+#define k2800Hz 0x00000010 -+#define k3000Hz 0x00000020 -+#define k3200Hz 0x00000040 -+#define k3429Hz 0x00000080 -+#define k8000Hz 0x00000100 -+ -+#define kAllSymbolRates ( k1200Hz | k1600Hz | k2400Hz | k2743Hz | \ -+ k2800Hz | k3000Hz | k3429Hz | k8000Hz ) -+ -+/* dataRateMap */ -+ -+#define k75bps 0x00000002 -+#define k300bps 0x00000004 -+#define k600bps 0x00000008 -+#define k1200bps 0x00000010 -+#define k2400bps 0x00000020 -+#define k4800bps 0x00000040 -+#define k7200bps 0x00000080 -+#define k9600bps 0x00000100 -+#define k12000bps 0x00000200 -+#define k14400bps 0x00000400 -+#define k16800bps 0x00000800 -+#define k19200bps 0x00001000 -+#define k21600bps 0x00002000 -+#define k24000bps 0x00004000 -+#define k26400bps 0x00008000 -+#define k28800bps 0x00010000 -+#define k31200bps 0x00020000 -+#define k33600bps 0x00040000 -+#define k36000bps 0x00080000 -+#define k38400bps 0x00100000 -+#define k57600bps 0x00200000 -+#define k115200bps 0x00400000 -+#define k230400bps 0x00800000 -+#define k460800bps 0x01000000 -+#define k921600bps 0x02000000 -+/* -+ * kPCMRate is used to identify that the reported rate is -+ * PCM modulation rate, and is only used for PCM modulation while -+ * reporting rate !!!! -+ */ -+#define kPCMRate 0x40000000 -+#define kPCMFlexRate 0x80000000 -+#define kAllDataRates 0x0FFFFFFF -+ -+/* rates specific for X2 and V.90 */ -+#define kPCM25333bps 0x00000001 -+#define kPCM26666bps 0x00000002 -+#define kPCM28000bps 0x00000004 -+#define kPCM29333bps 0x00000008 -+#define kPCM30666bps 0x00000010 -+#define kPCM32000bps 0x00000020 -+#define kPCM33333bps 0x00000040 -+#define kPCM34666bps 0x00000080 -+#define kPCM36000bps 0x00000100 -+#define kPCM37333bps 0x00000200 -+#define kPCM38666bps 0x00000400 -+#define kPCM40000bps 0x00000800 -+#define kPCM41333bps 0x00001000 -+#define kPCM42666bps 0x00002000 -+#define kPCM44000bps 0x00004000 -+#define kPCM45333bps 0x00008000 -+#define kPCM46666bps 0x00010000 -+#define kPCM48000bps 0x00020000 -+#define kPCM49333bps 0x00040000 -+#define kPCM50666bps 0x00080000 -+#define kPCM52000bps 0x00100000 -+#define kPCM53333bps 0x00200000 -+#define kPCM54666bps 0x00400000 -+#define kPCM56000bps 0x00800000 -+#define kPCM57333bps 0x01000000 -+ -+#define kV90ServerToClientDataRates \ -+ ( kPCM28000bps | kPCM29333bps | kPCM30666bps | \ -+ kPCM32000bps | kPCM33333bps | kPCM34666bps | \ -+ kPCM36000bps | kPCM37333bps | kPCM38666bps | \ -+ kPCM40000bps | kPCM41333bps | kPCM42666bps | \ -+ kPCM44000bps | kPCM45333bps | kPCM46666bps | \ -+ kPCM48000bps | kPCM49333bps | kPCM50666bps | \ -+ kPCM52000bps | kPCM53333bps | kPCM54666bps | \ -+ kPCM56000bps | kPCM57333bps ) -+ -+#define kV90ClientToServerDataRates \ -+ ( k4800bps | k7200bps | k9600bps | k12000bps | \ -+ k14400bps | k16800bps | k19200bps | k21600bps | \ -+ k24000bps | k26400bps | k28800bps | k31200bps | \ -+ k33600bps ) -+ -+ -+ -+#define kX2ServerToClientDataRates \ -+ ( kPCM25333bps | kPCM26666bps | kPCM28000bps | \ -+ kPCM29333bps | kPCM30666bps | kPCM32000bps | \ -+ kPCM33333bps | \ -+ kPCM34666bps | kPCM36000bps | kPCM37333bps | \ -+ kPCM38666bps | kPCM40000bps | kPCM41333bps | \ -+ kPCM42666bps | kPCM44000bps | kPCM45333bps | \ -+ kPCM46666bps | kPCM48000bps | kPCM49333bps | \ -+ kPCM50666bps | kPCM52000bps | kPCM53333bps | \ -+ kPCM54666bps | kPCM56000bps | kPCM57333bps ) -+#define kX2ClientToServerDataRates \ -+ ( k4800bps | k7200bps | k9600bps | k12000bps | k14400bps | \ -+ k16800bps | k19200bps | k21600bps | k24000bps | k26400bps | k28800bps | \ -+ k31200bps ) -+ -+ /* -+ Rates specific for Flex -+ */ -+#define kPCMFlex32000bps 0x00000001 -+#define kPCMFlex34000bps 0x00000002 -+#define kPCMFlex36000bps 0x00000004 -+#define kPCMFlex38000bps 0x00000008 -+#define kPCMFlex40000bps 0x00000010 -+#define kPCMFlex42000bps 0x00000020 -+#define kPCMFlex44000bps 0x00000040 -+#define kPCMFlex46000bps 0x00000080 -+#define kPCMFlex48000bps 0x00000100 -+#define kPCMFlex50000bps 0x00000200 -+#define kPCMFlex52000bps 0x00000400 -+#define kPCMFlex54000bps 0x00000800 -+#define kPCMFlex56000bps 0x00001000 -+#define kPCMFlex58000bps 0x00002000 -+#define kPCMFlex60000bps 0x00004000 -+ -+#define kFlexServerToClientDataRates \ -+ ( kPCMFlex32000bps | kPCMFlex34000bps | kPCMFlex36000bps | kPCMFlex38000bps | \ -+ kPCMFlex40000bps | kPCMFlex42000bps | kPCMFlex44000bps | kPCMFlex46000bps | \ -+ kPCMFlex48000bps | kPCMFlex50000bps | kPCMFlex52000bps | kPCMFlex52000bps | \ -+ kPCMFlex54000bps | kPCMFlex56000bps | kPCMFlex58000bps | kPCMFlex60000bps ) -+ -+#define kFlexClientToServerDataRates \ -+ ( k4800bps | k7200bps | k9600bps | k12000bps | \ -+ k14400bps | k16800bps | k19200bps | k21600bps | \ -+ k24000bps | k26400bps | k28800bps | k31200bps ) -+ -+ -+#define k2400BitShift 5 -+#define k4800BitShift 6 -+ -+#define kPCM28000bpsShift 2 -+ -+#define kV21Rates k300bps -+#define kV22Rates k1200bps -+#define kV22bisRates (k1200bps | k2400bps) -+#define kV23Rates (k75bps | k1200bps) -+#define kCidRates (k1200bps) -+#define kV32Rates (k4800bps | k9600bps) -+#define kV32bisRates (kV32Rates | k7200bps | k12000bps | k14400bps) -+#define kV32terboRates (kV32bisRates | k16800bps | k19200bps) -+#define kV34Rates ( k2400bps | k4800bps | k7200bps | k9600bps | k12000bps | k14400bps | \ -+ k16800bps | k19200bps | k21600bps | k24000bps | k26400bps | k28800bps | \ -+ k31200bps | k33600bps ) -+ -+#define kV27Rates (k2400bps | k4800bps) -+#define kV29Rates (k4800bps | k7200bps | k9600bps) -+#define kBell103Rates k300bps -+#define kBell212Rates k1200bps -+ -+ -+/* Demodulator capabilities */ -+#define kNeecEnabled 0x00000001 -+#define kPFeecEnabled 0x00000002 -+#define kIeecEnabled 0x00000004 -+#define kFeecEnabled 0x00000008 -+ -+#define kRapidEqualizerTraining 0x00000010 -+#define kRapidPECTraining 0x00000020 -+#define kRapidECTraining 0x00000040 -+#define kAutoLoadReductionEnabled 0x00000080 -+ -+#define kTimingTrackingEnabled 0x00000100 -+#define kPhaseLockedLoopEnabled 0x00000200 -+#define kFeecPhaseLockedLoopEnabled 0x00000400 -+#define kPhaseJitterTrackingEnabled 0x00000800 -+ -+#define kClockErrorTrackingEnabled 0x00001000 -+#define kFreqOffsetTrackingEnabled 0x00002000 -+#define kFeecFreqOffsetTrackingEnabled 0x00004000 -+ -+#define kShorterNeecEnabled 0x00008000 -+#define kShorterPFeecEnabled 0x00010000 -+#define kFrondEndHPFilterEnabled 0x00020000 -+#define kGainControlEnabled 0x00040000 -+#define kPhaseHitControlEnabled 0x00080000 -+#define kBandEdgeCorrectorEnabled 0x00100000 -+#define kDisableFaxFastClearDown 0x00200000 -+ -+#define kImdOffsetCompensationEnabled 0x00400000 -+ -+#define kV34ShortEqlLengthExtShift 23 -+#define kV34ShortEqlLengthExtMask (0x3< */ -+#define kSAM8bitSYNHuntDisabled 0 -+#define kSAM8bitSYNHuntEnabled ((ulong)1 << kSAMTransparentIdleTypeShift) -+#define kSAM16bitSYNHuntEnabled ((ulong)2 << kSAMTransparentIdleTypeShift) -+ -+/* */ -+#define kSAMSendFlagsOnIdle 0 -+#define kSAMSendMarksOnIdle ((ulong)1 << kSAMFramedIdleTypeShift) -+ -+/* */ -+#define kSAMAbortOnUnderrun 0 -+#define kSAMFlagsOnUnderrun ((ulong)1 << kSAMFramedOverrunActionShift) -+ -+/* */ -+#define kSAMHalfDuplexNoAuto 0 -+#define kSAMHalfDuplexAuto ((ulong)1 << kSAMHalfDuplexModeShift) -+ -+ -+/* */ -+#define kSAMNoCRC 0 -+#define kSAM16bitCRC ((ulong)1 << kSAMCRCTypeShift) -+#define kSAM32bitCRC ((ulong)2 << kSAMCRCTypeShift) -+ -+/* */ -+#define kSAMNRZIDisabled 0 -+#define kSAMNRZIEnabled ((ulong)1 << kSAMNRZIEnabledShift) -+ -+ -+/* LAPM setup maps */ -+#define kLapmDirection 0x00000001 /* Bit 0 */ -+#define kLapmSREJEnabled 0x00000002 /* Bit 1 */ -+#define kLapmDetectionEnabled 0x00000004 /* Bit 2 */ -+#define kLapmLongADPEnabled 0x00000008 /* Bit 3 */ -+ -+#define kLapmCompressionEnabledMask 0x00000030 -+#define kLapmTxCompressionEnabled 0x00000010 /* Bit 4 */ -+#define kLapmRxCompressionEnabled 0x00000020 /* Bit 5 */ -+#define kLapmCompressionEnabledShift 4 -+ -+#define kLapmRetryLimitMask 0x000000C0 /* Bits 6,7 */ -+ -+#define kLapmNoRetryLimit 0x00000000 -+#define kLapm4Retries 0x00000040 -+#define kLapm8Retries 0x00000080 -+#define kLapm20Retries 0x000000C0 -+ -+#define kLapmWindowSizeMask 0x00001F00 /* Bits 8-12 */ -+#define kLapmWindowSizeShift 8 -+ -+#define kLapmWindowSize8 0x00000800 -+#define kLapmWindowSize15 0x00000F00 -+ -+ -+#define kLapmInfoFieldSizeMask 0x0000E000 /* Bits 13-15 */ -+#define kLapmInfoField8Bytes 0x00000000 -+#define kLapmInfoField16Bytes 0x00002000 -+#define kLapmInfoField32Bytes 0x00004000 -+#define kLapmInfoField64Bytes 0x00006000 -+#define kLapmInfoField128Bytes 0x00008000 -+#define kLapmInfoField192Bytes 0x0000A000 -+#define kLapmInfoField256Bytes 0x0000C000 -+#define kLapmInfoField512Bytes 0x0000E000 -+#define kLapmInfoFieldSizeShift 13 -+ -+#define kLapmT400Mask 0x00030000 /* Bits 16-17 */ -+#define kLapmAutoT400 0x00000000 -+#define kLapm750msT400 0x00010000 -+#define kLapm3secT400 0x00020000 -+#define kLapm30secT400 0x00030000 -+ -+#define kLapmT401Mask 0x000C0000 /* Bits 18-19 */ -+#define kLapmAutoT401 0x00000000 -+#define kLapm750msT401 0x00040000 -+#define kLapm3secT401 0x00080000 -+#define kLapm6secT401 0x000C0000 -+ -+#define kLapmT403Mask 0x00300000 /* Bits 20-21 */ -+#define kLapmAutoT403 0x00000000 -+#define kLapm750msT403 0x00100000 -+#define kLapm2secT403 0x00200000 -+#define kLapm4secT403 0x00300000 -+ -+ -+ -+#define kLapmDictSizeMask 0x00C00000 /* Bits 22-23 */ -+#define kLapmDictSize512 0x00000000 -+#define kLapmDictSize1024 0x00400000 -+#define kLapmDictSize2048 0x00800000 -+#define kLapmDictSize4096 0x00C00000 -+ -+#define kLapmStringSizeMask 0xFF000000 /* Bits 24-31 */ -+#define kLapmStringSizeShift 24 -+ -+/* MNP setup maps */ -+ -+#define kMnpMinPLevel 0x00000001 /* Bit 0: 1 - Minimal, 0 - Standard */ -+#define kMnpStdPLevel 0x00000000 /* Bit 0: 1 - Minimal, 0 - Standard */ -+ -+#define kMnpOptimizationEnabled 0x00000002 /* Bit 1 */ -+#define kMnpOptimizationDisabled 0x00000000 /* Bit 1 */ -+ -+#define kMnpCompressionEnabled 0x00000004 /* Bit 2 */ -+#define kMnpCompressionDisabled 0x00000000 /* Bit 2 */ -+ -+#define kMnpClassMask 0x00000018 -+#define kMnpClassShift 3 -+#define kMnpClass1 0x00000008 -+#define kMnpClass2 0x00000010 -+#define kMnpClass3 0x00000018 /* Bits 3,4 */ -+ -+#define kMnpMaxRetryMask 0x00000060 /* Bits 5,6 */ -+#define kMnpMaxRetryShift 5 -+#define kMnpNoRetryLimit 0x00000000 -+#define kMnp4Retries 0x00000020 -+#define kMnp8Retries 0x00000040 -+#define kMnp20Retries 0x00000060 -+ -+#define kMnpInfoFieldSizeMask 0x00000380 /* Bits 7-9 */ -+#define kMnpInfoFieldSizeShift 7 -+#define kMnpInfoField8Bytes 0x00000000 -+#define kMnpInfoField16Bytes 0x00000080 -+#define kMnpInfoField32Bytes 0x00000100 -+#define kMnpInfoField64Bytes 0x00000180 -+#define kMnpInfoField128Bytes 0x00000200 -+#define kMnpInfoField192Bytes 0x00000280 -+#define kMnpInfoField256Bytes 0x00000300 -+#define kMnpInfoField260Bytes 0x00000380 -+ -+#define kMnpT400Mask 0x00003000 /* Bits 12,13 */ -+#define kMnpT400Shift 12 -+#define kMnpAutoT400 0x00000000 -+#define kMnp750msT400 0x00001000 -+#define kMnp3secT400 0x00002000 -+#define kMnp6secT400 0x00003000 -+ -+#define kMnpT401Mask 0x0000C000 /* Bits 14,15 */ -+#define kMnpT401Shift 14 -+#define kMnpAutoT401 0x00000000 -+#define kMnp750msT401 0x00004000 -+#define kMnp3secT401 0x00008000 -+#define kMnp6secT401 0x0000C000 -+ -+#define kMnpT403Mask 0x00030000 /* Bits 16,17 */ -+#define kMnpT403Shift 16 -+#define kMnpAutoT403 0x00000000 -+#define kMnp60secT403 0x00010000 -+#define kMnp600secT403 0x00020000 -+#define kMnp3600secT403 0x00030000 -+ -+#define kMnpFallbackTypeMask 0x000C0000 /* Bits 18,19 */ -+#define kMnpFallbackTypeShift 18 -+#define kMnpNoFallback 0x00000000 -+#define kMnpFallbackTime 0x00040000 -+#define kMnpFallback200 0x00080000 -+#define kMnpFallbackChar 0x000C0000 -+ -+#define kMnpWindowSizeMask 0x00300000 /* Bits 20,21 */ -+#define kMnpWindowSizeShift 20 -+#define kMnp1Frame 0x00000000 -+#define kMnp4Frames 0x00100000 -+#define kMnp8Frames 0x00200000 -+#define kMnp16Frames 0x00300000 -+ -+#define kMnpDirection 0x00800000 /* Bit 22 */ -+ -+#define kMnpFallbackCharMask 0xFF000000 /* Bit 24-31 */ -+#define kMnpFallbackCharShift 24 -+ -+/* kV34HDXTurnOffCurrentModeCmd state parameter values */ -+ -+#define kV34HDXTurnOffAsClearDown 0 -+#define kV34HDXTurnOffFromControlSource 1 -+#define kV34HDXTurnOffFromControlDestination 2 -+#define kV34HDXTurnOffFromPrimarySource 3 -+#define kV34HDXTurnOffFromPrimaryDestination 4 -+ -+/* V70 setup maps */ -+ -+#define kV70Direction 0x00000001 /* Bit 0 */ -+#define kV70uIHEnabled 0x00000002 /* Bit 1 */ -+#define kV70AudioHeaderEnabled 0x00000004 /* Bit 2 */ -+#define kV70SilenceSupprEnabled 0x00000008 /* Bit 3 */ -+ -+#define kV70SuspendResumeShift 4 -+#define kV70SuspendResumeMask (3 << kV70SuspendResumeShift) -+#define kV70SuspendResumeDisabled 0x00000000 /* Bit 4,5 */ -+#define kV70SuspendResumeWAddr 0x00000010 /* Bit 4 */ -+#define kV70SuspendResumeWoAddr 0x00000020 /* Bit 5 */ -+ -+#define kV70CrcLengthShift 6 -+#define kV70CrcLengthMask (3 << kV70CrcLengthShift) -+#define kV70CrcLength16 0x00000000 /* Bit 6,7 */ -+#define kV70CrcLength8 0x00000040 /* Bit 6 */ -+#define kV70CrcLength32 0x00000080 /* Bit 7 */ -+ -+#define kV70BlockingFactorShift 8 -+#define kV70BlockingFactorMask (3 << kV70BlockingFactorShift) -+#define kV70BlockingFactor1 0x00000000 /* Bit 8,9 */ -+#define kV70BlockingFactor2 0x00000100 /* Bit 8 */ -+#define kV70BlockingFactor3 0x00000200 /* Bit 9 */ -+#define kV70BlockingFactor4 0x00000300 /* Bit 8,9 */ -+ -+#define kV70InitChannelsShift 10 -+#define kV70InitChannelsMask (1 << kV70InitChannelsShift) -+#define kV70InitNoChannels 0x00000000 /* Bit 10,11 */ -+#define kV70InitDataChannel 0x00000400 /* Bit 10,11 */ -+#define kV70InitAudioChannel 0x00000800 /* Bit 10,11 */ -+#define kV70InitBothChannels 0x00000C00 /* Bit 10,11 */ -+ -+#define kV70OOBEnabled 0x00001000 /* Bit 12 */ -+ -+/* V80 setup maps */ -+ -+#define kV80Direction 0x00000001 /* Bit 0 */ -+ -+#define kV80ModeShift 1 -+#define kV80ModeMask (3 << kV80ModeShift) -+#define kV80SyncMode (0 << kV80ModeShift) -+#define kV80TunnellingMode (1 << kV80ModeShift) -+#define kV80SamMode (2 << kV80ModeShift) -+#define kV80SamTransparentMode (2 << kV80ModeShift) -+#define kV80SamFramedMode (3 << kV80ModeShift) -+ -+#define kV80TransIdleShift 3 -+#define kV80TransIdleMask (3 << kV80TransIdleShift) -+#define kV80TransIdleNoHunt (0 << kV80TransIdleShift) -+#define kV80TransIdleHunt8 (1 << kV80TransIdleShift) -+#define kV80TransIdleHunt16 (2 << kV80TransIdleShift) -+ -+#define kV80FrameIdleShift 5 -+#define kV80FrameIdleMask (1 << kV80FrameIdleShift) -+#define kV80FrameIdleFlags (0 << kV80FrameIdleShift) -+#define kV80FrameIdleMarks (1 << kV80FrameIdleShift) -+ -+#define kV80FrameUnOvShift 6 -+#define kV80FrameUnOvMask (1 << kV80FrameUnOvShift) -+#define kV80FrameUnOvAbort (0 << kV80FrameUnOvShift) -+#define kV80FrameUnOvFlag (1 << kV80FrameUnOvShift) -+ -+#define kV80HdAutoShift 7 -+#define kV80HdAutoMask (1 << kV80HdAutoShift) -+#define kV80HdAutoNormal (0 << kV80HdAutoShift) -+#define kV80HdAutoExtended (1 << kV80HdAutoShift) -+ -+#define kV80CrcTypeShift 8 -+#define kV80CrcTypeMask (3 << kV80CrcTypeShift) -+#define kV80NoCrc (0 << kV80CrcTypeShift) -+#define kV80Crc16 (1 << kV80CrcTypeShift) -+#define kV80Crc32 (2 << kV80CrcTypeShift) -+ -+#define kV80NrziShift 10 -+#define kV80NrziMask (1 << kV80NrziShift) -+#define kV80NrziDisabled (0 << kV80NrziShift) -+#define kV80NrziEnabled (1 << kV80NrziShift) -+ -+#define kV80Syn1Mask 0x00FF0000 /* Bit 16-23 */ -+#define kV80Syn1Shift 16 -+#define kV80Syn2Mask 0xFF000000 /* Bit 24-31 */ -+#define kV80Syn2Shift 24 -+ -+/* kStartCallProgressMonitorCmd setup masks */ -+ -+#define kDTMFDetectorDebouncerEnabled 0x0001 -+#define kModemSignalDetectorDebouncerEnabled 0x0002 -+#define kCallProgressDetectorDebouncerEnabled 0x0004 -+#define kCustomSignalDebouncerEnabled 0x0008 -+#define kFaxCallingToneSuppressionEnabled 0x0010 -+#define kDataCallingToneSuppressionEnabled 0x0020 -+#define kCISuppressionEnabled 0x0040 -+#define kAnsSuppressionEnabled 0x0080 -+ -+/* kDialCmd setup masks (dialerSetup bit fields) */ -+ -+#define kDTMFDialingEnabled 0x0001 -+#define kPulseDialingEnabled 0x0002 -+#define kModeSwitchEnabled 0x0004 -+#define kBlindDialingEnabled 0x0008 -+#define kPulseDialingMethodMask 0x0030 -+#define kDialModifierTranslationMask 0x00C0 -+#define kFlashWhilePulseDialingEnabled 0x0100 -+ -+/* Pulse dialing method */ -+#define kPulseDialingNPulsesPerDigit 0x0000 -+#define kPulseDialingNplusOnePulsesPerDigit 0x0010 -+#define kPulseDialingTenMinusNPulsesPerDigit 0x0020 -+ -+/* Dial modifier translation */ -+#define kTreatWasPause 0x0040 /* Tread 'W' modifier as pause */ -+#define kTreatCommaAsWaitForDialtone 0x0080 -+ -+#ifdef TI_C6X -+#include "C6xDefs.h" -+#endif -+#ifdef PENTIUM_MMX -+#include "PentiumDefs.h" -+#endif -+ -+ -+#if defined(DSP16K) && !defined(SoftModemGlobals) -+/* ensure that code generator does not use r5 */ -+register int *softmodem_h_should_not_be_included_after_softmodem_gh asm("r5"); -+#endif -+ -+/****************************************************************************/ -+/* 3. Interface functions. */ -+/* */ -+/****************************************************************************/ -+ -+#ifdef ADSL_MODEM -+ -+#ifndef SoftDslHeader -+#include "SoftDsl.h" -+#endif -+extern char* SM_DECL SoftModemGetRevString(void); -+extern char* SM_DECL SoftModemGetProductName(void); -+extern char* SM_DECL SoftModemGetBuildDate(void); -+extern char* SM_DECL SoftModemGetFullManufacturerName(void); -+extern char* SM_DECL SoftModemGetShortManufacturerName(void); -+extern int SM_DECL SoftModemRevStringSize(void); -+extern char* SM_DECL SoftModemGetVendorIDString(void); -+extern char* SM_DECL SoftModemGetT1413VendorIDString(void); -+extern char* SM_DECL SoftModemGetSerialNumberString(void); -+extern int SM_DECL SoftModemSerNumStringSize(void); -+#define SoftDslGetProductName SoftModemGetProductName -+#define SoftDslGetBuildDate SoftModemGetBuildDate -+#define SoftDslGetFullManufacturerName SoftModemGetFullManufacturerName -+#define SoftDslGetShortManufacturerName SoftModemGetShortManufacturerName -+ -+#else /* !ADSL_MODEM */ -+ -+extern void SM_DECL SoftModemSetMemoryPtr (void *varsPtr); -+extern void* SM_DECL SoftModemGetMemoryPtr (void); -+extern void SM_DECL SoftModemSetRefData (void *varsPtr); -+extern void* SM_DECL SoftModemGetRefData (void); -+extern int SM_DECL SoftModemGetMemorySize (void); -+extern void SM_DECL SoftModemInit (void); -+extern void SM_DECL SoftModemReset (void); -+extern void SM_DECL SoftModemLineHandler (int sampleCount, short *srcPtr, short *dstPtr); -+extern void SM_DECL SoftModemTimer (long timeQ24ms); -+extern Boolean SM_DECL SoftModemCommandHandler (modemCommandStruct *cmdPtr); -+extern int SM_DECL SoftModemGetExternalMemorySize(void); -+extern void SM_DECL SoftModemSetExternalMemoryPtr(void *varsPtr); -+ -+extern void SM_DECL SoftModemSetPcmCoding (pcmCodingType pcmCoding); -+extern void SM_DECL SoftModemPcmLineHandler (int sampleCount, uchar *srcPtr, uchar *dstPtr); -+ -+/* SoftModem IO functions */ -+extern int SM_DECL SoftModemWrite(int nBytes, uchar* srcPtr); -+extern int SM_DECL SoftModemRead(int nBytes, uchar* dstPtr); -+extern int SM_DECL SoftModemWriteFrame(int nBytes, uchar* srcPtr); -+extern int SM_DECL SoftModemReadFrame(int maxFrameSize, uchar* dstPtr); -+extern int SM_DECL SoftModemCountWritePending(void); -+extern int SM_DECL SoftModemCountReadPending(void); -+extern int SM_DECL SoftModemWriteSpaceAvailable(void); -+extern void SM_DECL SoftModemWriteFlush(void); -+extern void SM_DECL SoftModemReadFlush(void); -+extern int SM_DECL SoftModemGetWriteBufferSize(void); -+extern int SM_DECL SoftModemGetReadBufferSize(void); -+ -+#ifdef AUDIO -+extern int SM_DECL SoftModemAudioHandler(int sampleCount, short *srcPtr, short *dstPtr); -+extern int SM_DECL SoftModemAudioRxDataHandler(int nBytes, uchar* srcPtr); -+extern int SM_DECL SoftModemAudioTxDataHandler(int nBytes, uchar* dstPtr); -+#endif -+ -+ -+#define SoftModemSetGlobalPtr SoftModemSetMemoryPtr -+#define SoftModem SoftModemLineHandler -+#ifndef LINKLAYER_V42BIS_LARGE_DICTIONARY -+#define kSoftModemMaxMemorySize (65536) -+#else -+#define kSoftModemMaxMemorySize (65536 + 8192) -+#endif -+ -+/* -+ * Internal functions -+ */ -+extern long SM_DECL SoftModemGetDCOffset(void); -+extern void SM_DECL SoftModemDisableDCOffsetTracking(void); -+extern void SM_DECL SoftModemEnableDCOffsetTracking(void); -+extern long SM_DECL SoftModemGetRcvPower(void); -+extern ulong SM_DECL SoftModemGetHybridDelay(void); -+extern void SM_DECL SoftModemStatusHandler (modemStatusStruct *status); -+extern Boolean SM_DECL SoftModemInternalCommandHandler (modemCommandStruct *cmdPtr); -+extern void SM_DECL SoftModemInternalStatusHandler (modemStatusStruct *status); -+extern void SM_DECL SoftModemSetControllerOnlyMode(commandHandlerType externalDataPumpCommandHandlerPtr); -+extern char* SM_DECL SoftModemGetRevString(void); -+extern char* SM_DECL SoftModemGetProductName(void); -+extern char* SM_DECL SoftModemGetBuildDate(void); -+extern char* SM_DECL SoftModemGetFullManufacturerName(void); -+extern char* SM_DECL SoftModemGetShortManufacturerName(void); -+extern int SM_DECL SoftModemRevStringSize(void); -+extern char* SM_DECL SoftModemGetVendorIDString(void); -+extern char* SM_DECL SoftModemGetSerialNumberString(void); -+extern void SM_DECL SoftModemAuxTxDataHandler(int nBytes, uchar *dataPtr); -+extern void SM_DECL SoftModemAuxRxDataHandler(int nBytes, uchar *dataPtr); -+extern void SM_DECL SoftModemTxDataHandler(int nBytes, uchar *dataPtr); -+extern void SM_DECL SoftModemRxDataHandler(int nBytes, uchar *dataPtr); -+extern void SM_DECL SoftModemATPrintf(uchar *format, void *arg1, void *arg2, void *arg3); -+ -+#define SoftModemSetInputSaturationLimit(limit) (gSystemVars.inputSignalLimit = limit) -+#define SoftModemResetInputSaturationLimit() (gSystemVars.inputSignalLimit = 0) -+ -+#endif /* !ADSL_MODEM */ -+ -+#endif /* SoftModemPh */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftModemTypes.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftModemTypes.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftModemTypes.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftModemTypes.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,292 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * SoftModemTypes.h -+ * -+ * -+ * Description: -+ * This file contains some of the type declarations for SoftModem -+ * -+ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved. -+ * Authors: Mark Gonikberg, Haixiang Liang. -+ * -+ * $Revision: 1.9 $ -+ * -+ * $Id: SoftModemTypes.h,v 1.9 2004/04/13 00:16:59 ilyas Exp $ -+ * -+ * $Log: SoftModemTypes.h,v $ -+ * Revision 1.9 2004/04/13 00:16:59 ilyas -+ * Merged the latest ADSL driver changes -+ * -+ * Revision 1.8 2004/01/24 01:35:33 ytan -+ * add multi-section lmem swap -+ * -+ * Revision 1.7 2001/09/21 19:19:01 ilyas -+ * Minor fixes for VxWorks build -+ * -+ * Revision 1.6 2001/08/16 02:16:39 khp -+ * - added definitions for SLOW_DATA and FAST_TEXT, defined to nothing -+ * except when bcm47xx && USE_SLOW_DATA or USE_FAST_TEXT. Any function -+ * that needs to run fast should be marked with FAST_TEXT. Any data that -+ * is not referenced often should be marked with SLOW_DATA. -+ * -+ * Revision 1.5 2001/03/30 00:49:59 liang -+ * Changed warning output message. -+ * -+ * Revision 1.4 2000/06/21 22:24:40 yongbing -+ * Modify WARN micro to limit the number of same warnings printed -+ * -+ * Revision 1.3 1999/08/05 20:02:13 liang -+ * Merged with the softmodem top of the tree on 08/04/99. -+ * -+ * Revision 1.2 1999/01/27 22:14:29 liang -+ * Merge with SoftModem_3_1_02. -+ * -+ * Revision 1.19 1998/11/17 04:02:39 yura -+ * Fixed WARN and ASSERT redefinition warning for WinNT targets -+ * -+ * Revision 1.18 1998/08/26 19:20:43 scott -+ * Commented out EXCLUDE_CYGWIN32_TYPES define -+ * -+ * Revision 1.17 1998/08/13 19:03:06 scott -+ * Added BitField definition and INT_IS_LONG -+ * -+ * Revision 1.16 1998/08/08 03:39:55 scott -+ * The DEBUG_PTR_ENABLED macro can be used to enable only the DEBUG_PTR macros -+ * -+ * Revision 1.15 1998/07/28 22:21:31 mwg -+ * Fixed problems with NULL & nil being defined incorrectly -+ * -+ * Revision 1.14 1998/07/08 17:09:17 scott -+ * Define ASSERT and WARN only if not already defined -+ * -+ * Revision 1.13 1998/07/02 20:46:34 scott -+ * Added workaround for building certain builds with older SunOS -+ * -+ * Revision 1.12 1998/02/09 18:24:49 scott -+ * Defined "Private" as nothing for GreenHill (to prevent erroneous section -+ * allocations for data) -+ * -+ * Revision 1.11 1997/08/29 21:39:24 scott -+ * Added check for LONG_IS_INT define (for TI C6X support) -+ * -+ * Revision 1.10 1997/05/29 19:50:23 mwg -+ * Added code to avoid type redefintions under SunOS. -+ * -+ * Revision 1.9 1997/03/19 18:35:08 mwg -+ * Changed copyright notice. -+ * -+ * Revision 1.8 1997/02/11 00:05:53 mwg -+ * Minor adjustments for Pentium optimization. -+ * -+ * Revision 1.7 1997/01/11 01:30:47 mwg -+ * Added new macro WARN -- the same as ASSERT but without exit. -+ * -+ * Revision 1.6 1996/08/22 20:07:39 liang -+ * When ASSERT fires, only print out information, don't exit. -+ * -+ * Revision 1.5 1996/05/06 06:49:10 mwg -+ * Fixed linux problems. -+ * -+ * Revision 1.4 1996/05/02 08:40:16 mwg -+ * Merged in Chromatic bug fixes. -+ * -+ * Revision 1.3 1996/04/01 20:59:53 mwg -+ * Added macros to setup and use debug pointer. -+ * -+ * Revision 1.2 1996/02/27 01:50:04 mwg -+ * Added ASSERT() macro. -+ * -+ * Revision 1.1.1.1 1996/02/14 02:35:13 mwg -+ * Redesigned the project directory structure. Merged V.34 into the project. -+ * -+ * Revision 1.2 1995/12/03 06:59:31 mwg -+ * Fixed all gcc varnings. We are now running under Linux on a PC! -+ * -+ *****************************************************************************/ -+#ifndef SoftModemTypesh -+#define SoftModemTypesh -+ -+#ifdef LONG_SHORTS -+#define short long -+#define ushort unsigned long -+#endif -+ -+typedef signed char schar; -+typedef unsigned char uchar; -+ -+#if 0 /* This is not currently required */ -+#if defined(_CYGWIN32) && defined(DEBUG) -+#define EXCLUDE_CYGWIN32_TYPES -+#endif -+#endif -+ -+#if !defined(_SYS_TYPES_H) || !defined(TARG_OS_RTEMS) -+#if defined(_CFE_) -+ typedef unsigned int uint; -+ typedef unsigned long ulong; -+ typedef unsigned short ushort; -+#elif defined(TARG_OS_RTEMS) -+#if defined(HOST_ARCH_LINUX) -+ typedef unsigned int uint; -+#endif -+ typedef unsigned long ulong; -+#if defined(HOST_ARCH_LINUX) -+ typedef unsigned short ushort; -+#endif -+#elif defined(EXCLUDE_CYGWIN32_TYPES) || (!defined _NO_TYPE_DEFS_ && !defined _SYS_TYPES_H && !defined __SYS_TYPES_H__ && !defined _SYS_BSD_TYPES_H && !defined _LINUX_TYPES_H) || defined(__sparc__) -+#ifndef EXCLUDE_CYGWIN32_TYPES -+ typedef unsigned int uint; -+#endif -+#ifndef _LINUX_TYPES_H -+ typedef unsigned long ulong; -+#endif -+#if !defined(ushort) && !defined(EXCLUDE_CYGWIN32_TYPES) && !defined(__INCvxTypesOldh) -+ typedef unsigned short ushort; -+#endif -+#endif -+#else -+typedef unsigned long ulong; -+#endif -+ -+#if defined(GREENHILL) || defined(GNUTX39) /* GH allocates private data to incorrect section */ -+#define Private -+#else -+#define Private static -+#endif -+ -+#define Public -+ -+#ifdef NULL -+#undef NULL -+#endif -+#ifdef nil -+#undef nil -+#endif -+ -+#define NULL 0 -+#define nil 0 -+ -+#define false 0 -+#define true 1 -+typedef unsigned char Boolean; -+typedef unsigned int BitField; /* this must occur BEFORE long_is_int/int_is_long defs */ -+ -+#ifdef LONG_IS_INT -+#define long int -+#define ulong uint -+#endif -+ -+#ifdef INT_IS_LONG -+#define int long -+#define uint ulong -+#endif -+ -+#define POSTULATE(postulate) \ -+ do \ -+ { \ -+ typedef struct \ -+ { \ -+ char NegativeSizeIfPostulateFalse[((int)(postulate))*2 - 1]; \ -+ } PostulateCheckStruct; \ -+ } \ -+ while (0) -+ -+#if defined(DEBUG) && !defined(__KERNEL__) -+#ifndef WARN -+#define kDSLNumberWarnTimes 10 -+#define WARN(assertion) \ -+ { static int warnSeveralTimes=0; \ -+ if ((!(assertion))&(warnSeveralTimes -+*/ -+/**************************************************************************** -+ * -+ * AdslCore.c -- Bcm ADSL core driver -+ * -+ * Description: -+ * This file contains BCM ADSL core driver -+ * -+ * -+ * Copyright (c) 2000-2001 Broadcom Corporation -+ * All Rights Reserved -+ * No portions of this material may be reproduced in any form without the -+ * written permission of: -+ * Broadcom Corporation -+ * 16215 Alton Parkway -+ * Irvine, California 92619 -+ * All information contained in this document is Broadcom Corporation -+ * company private, proprietary, and trade secret. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.4 $ -+ * -+ * $Id: AdslCoreDefs.h,v 1.4 2004/07/20 23:45:48 ilyas Exp $ -+ * -+ * $Log: AdslCoreDefs.h,v $ -+ * Revision 1.4 2004/07/20 23:45:48 ilyas -+ * Added driver version info, SoftDslPrintf support. Fixed G.997 related issues -+ * -+ * Revision 1.3 2004/06/10 00:20:33 ilyas -+ * Added L2/L3 and SRA -+ * -+ * Revision 1.2 2004/04/12 23:24:38 ilyas -+ * Added default G992P5 PHY definition -+ * -+ * Revision 1.1 2004/04/08 23:59:15 ilyas -+ * Initial CVS checkin -+ * -+ ****************************************************************************/ -+ -+#ifndef _ADSL_CORE_DEFS_H -+#define _ADSL_CORE_DEFS_H -+ -+#if defined(__KERNEL__) -+#include -+#endif -+ -+#if defined(CONFIG_BCM96348) || defined(BOARD_bcm96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(BOARD_bcm96338) || defined(_BCM96338_) -+#ifdef ADSL_ANNEXC -+#include "../adslcore6348C/adsl_defs.h" -+#elif defined(ADSL_ANNEXB) -+#include "../adslcore6348B/adsl_defs.h" -+#elif defined(ADSL_SADSL) -+#include "../adslcore6348SA/adsl_defs.h" -+#else -+#include "../adslcore6348/adsl_defs.h" -+#endif -+#endif -+ -+#if defined(__KERNEL__) || defined(TARG_OS_RTEMS) || defined(_CFE_) -+#if defined(CONFIG_BCM96345) || defined(BOARD_bcm96345) || defined(_BCM96345_) -+#ifdef ADSL_ANNEXC -+#include "../adslcore6345C/adsl_defs.h" -+#elif defined(ADSL_ANNEXB) -+#include "../adslcore6345B/adsl_defs.h" -+#elif defined(ADSL_SADSL) -+#include "../adslcore6345SA/adsl_defs.h" -+#else -+#include "../adslcore6345/adsl_defs.h" -+#endif -+#endif /* of CONFIG_BCM96345 */ -+#else -+#if defined(CONFIG_BCM96345) -+#ifdef ADSL_ANNEXC -+#include "../adslcoreC/adsl_defs.h" -+#elif defined(ADSL_ANNEXB) -+#include "../adslcoreB/adsl_defs.h" -+#elif defined(ADSL_SADSL) -+#include "../adslcoreSA/adsl_defs.h" -+#else -+#include "../adslcore/adsl_defs.h" -+#endif -+#endif /* of CONFIG_BCM96345 */ -+#endif /* __KERNEL__ */ -+ -+#ifdef _WIN32_WCE -+#define ASSERT(a) -+#endif -+ -+#include "AdslXfaceData.h" -+ -+/* adjust some definitions for the HOST */ -+ -+#undef GLOBAL_PTR_BIAS -+#undef ADSLCORE_ONLY -+#undef USE_SLOW_DATA -+#undef USE_FAST_TEXT -+#undef VP_SIMULATOR -+#undef bcm47xx -+#undef ADSL_FRAMER -+#undef ATM -+#undef ATM_I432 -+#undef DSL_OS -+ -+#define HOST_ONLY -+#define G997_1_FRAMER -+#define ADSL_MIB -+ -+#ifndef FLATTEN_ADDR_ADJUST -+#define FLATTEN_ADDR_ADJUST 0xFFF00000 -+#endif -+ -+/* definitions for combo PHY (AnnexA(ADSL2) and AnnexB) */ -+ -+#if !(defined(ADSL_SINGLE_PHY) || defined(G992_ANNEXC)) -+ -+#undef G992P1_ANNEX_A -+#define G992P1_ANNEX_A -+#undef G992P3 -+#define G992P3 -+#undef G992P5 -+#define G992P5 -+#define G992P1_ANNEX_A -+#undef READSL2 -+#define READSL2 -+#undef G992P1_ANNEX_A_USED_FOR_G992P2 -+#define G992P1_ANNEX_A_USED_FOR_G992P2 -+#undef T1P413 -+#define T1P413 -+ -+#undef G992P1_ANNEX_B -+#define G992P1_ANNEX_B -+ -+#endif -+ -+/* ADSL PHY definition */ -+ -+typedef struct { -+ unsigned long sdramPageAddr; -+ unsigned long sdramImageAddr; -+ unsigned long sdramImageSize; -+ unsigned long sdramPhyImageAddr; -+ unsigned short fwType; -+ unsigned short chipType; -+ unsigned short mjVerNum; -+ unsigned short mnVerNum; -+ char *pVerStr; -+ unsigned long features[4]; -+} adslPhyInfo; -+extern adslPhyInfo adslCorePhyDesc; -+ -+/* chip list */ -+ -+#define kAdslPhyChipMjMask 0xFF00 -+#define kAdslPhyChipMnMask 0x00FF -+#define kAdslPhyChipUnknown 0 -+#define kAdslPhyChip6345 0x100 -+#define kAdslPhyChip6348 0x200 -+#define kAdslPhyChipRev0 0 -+#define kAdslPhyChipRev1 1 -+#define kAdslPhyChipRev2 2 -+#define kAdslPhyChipRev3 3 -+#define kAdslPhyChipRev4 4 -+#define kAdslPhyChipRev5 5 -+ -+#define ADSL_PHY_SUPPORT(f) AdslFeatureSupported(adslCorePhyDesc.features,f) -+#define ADSL_PHY_SET_SUPPORT(p,f) AdslFeatureSet((p)->features,f) -+ -+/* ADSL Driver to/from PHY address and data conversion macros */ -+ -+#ifdef ADSLDRV_LITTLE_ENDIAN -+#define ADSL_ENDIAN_CONV_LONG(x) ( ((x) << 24) | (((x) << 8) & 0x00FF0000) | (((x) >> 8) & 0x0000FF00) | ((unsigned long)(x) >> 24) ) -+#define ADSL_ENDIAN_CONV_SHORT(x) ( ((x) << 8) | ((unsigned short)(x) >> 8) ) -+#define ADSL_ENDIAN_CONV_2SHORTS(x) ( ((x) << 16) | ((unsigned long)(x) >> 16) ) -+#else -+#define ADSL_ENDIAN_CONV_LONG(x) x -+#define ADSL_ENDIAN_CONV_SHORT(x) x -+#define ADSL_ENDIAN_CONV_2SHORTS(x) x -+#endif -+ -+#ifndef ADSL_PHY_XFACE_OFFSET -+#define ADSL_PHY_XFACE_OFFSET 0x00017F90 -+#endif -+#define ADSL_LMEM_XFACE_DATA (0xFFF00000 | ADSL_PHY_XFACE_OFFSET) -+ -+#ifndef ADSL_PHY_SDRAM_START -+#define ADSL_PHY_SDRAM_START 0x10000000 -+#endif -+#ifndef ADSL_PHY_SDRAM_BIAS -+#define ADSL_PHY_SDRAM_BIAS 0x00040000 -+#endif -+#define ADSL_PHY_SDRAM_START_4 (ADSL_PHY_SDRAM_START + ADSL_PHY_SDRAM_BIAS) -+ -+#ifndef ADSL_PHY_SDRAM_PAGE_SIZE -+#define ADSL_PHY_SDRAM_PAGE_SIZE 0x00080000 -+#endif -+ -+#ifdef ADSL_PHY_SDRAM_BIAS -+#define ADSL_SDRAM_IMAGE_SIZE (ADSL_PHY_SDRAM_PAGE_SIZE - ADSL_PHY_SDRAM_BIAS) -+#else -+#define ADSL_SDRAM_IMAGE_SIZE (256*1024) -+#endif -+ -+ -+#ifndef ADSL_PHY_SDRAM_LINK_OFFSET -+#define ADSL_PHY_SDRAM_LINK_OFFSET 0x00040000 -+#endif -+ -+#define ADSL_SDRAM_TOTAL_SIZE 0x00800000 -+#define ADSL_SDRAM_HOST_MIPS_DEFAULT (0xA0000000 | (ADSL_SDRAM_TOTAL_SIZE - ADSL_PHY_SDRAM_PAGE_SIZE + ADSL_PHY_SDRAM_BIAS)) -+ -+#define ADSLXF ((AdslXfaceData *) ADSL_LMEM_XFACE_DATA) -+ -+#define ADSL_MIPS_LMEM_ADDR(a) (((ulong)(a) & 0x19000000) == 0x19000000) -+#define SDRAM_ADDR_TO_HOST(a) ((void *) ((ulong)(a) - adslCorePhyDesc.sdramPhyImageAddr + \ -+ (ADSLXF->sdramBaseAddr ? (unsigned long) ADSLXF->sdramBaseAddr : ADSL_SDRAM_HOST_MIPS_DEFAULT))) -+#define SDRAM_ADDR_TO_ADSL(a) ((void *) (adslCorePhyDesc.sdramPhyImageAddr + ((ulong)(a) - \ -+ (ADSLXF->sdramBaseAddr ? (unsigned long) ADSLXF->sdramBaseAddr : ADSL_SDRAM_HOST_MIPS_DEFAULT)))) -+ -+#define ADSL_ADDR_TO_HOST(addr) ADSL_MIPS_LMEM_ADDR(addr) ? (void *) ((ulong) (addr) | FLATTEN_ADDR_ADJUST) : SDRAM_ADDR_TO_HOST(addr) -+ -+ -+#ifndef DEBUG -+#define DEBUG -+#endif -+ -+#ifndef __SoftDslPrintf -+void __SoftDslPrintf(void *gDslVars, char *fmt, int argNum, ...); -+#endif -+ -+#endif -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMib.gh linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMib.gh ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMib.gh 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMib.gh 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,94 @@ -+/**************************************************************************** -+ * -+ * AdslMib.gh -+ * -+ * Description: -+ * This is a header file which defines the type for AdslMib -+ * global variable structure. -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.8 $ -+ * -+ * $Id: AdslMib.gh,v 1.8 2004/06/04 18:56:01 ilyas Exp $ -+ * -+ * $Log: AdslMib.gh,v $ -+ * Revision 1.8 2004/06/04 18:56:01 ilyas -+ * Added counter for ADSL2 framing and performance -+ * -+ * Revision 1.7 2003/10/17 21:02:12 ilyas -+ * Added more data for ADSL2 -+ * -+ * Revision 1.6 2003/10/14 00:55:27 ilyas -+ * Added UAS, LOSS, SES error seconds counters. -+ * Support for 512 tones (AnnexI) -+ * -+ * Revision 1.5 2003/07/18 19:07:15 ilyas -+ * Merged with ADSL driver -+ * -+ * Revision 1.4 2002/11/13 21:32:49 ilyas -+ * Added adjustK support for Centillium non-standard framing mode -+ * -+ * Revision 1.3 2002/10/31 20:27:13 ilyas -+ * Merged with the latest changes for VxWorks/Linux driver -+ * -+ * Revision 1.2 2002/07/20 00:51:41 ilyas -+ * Merged witchanges made for VxWorks/Linux driver. -+ * -+ * Revision 1.1 2001/12/21 22:39:30 ilyas -+ * Added support for ADSL MIB data objects (RFC2662) -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef AdslMibGlobals -+#define AdslMibGlobals -+ -+#include "AdslMib.h" -+ -+typedef struct -+ { -+ /* MIB data */ -+ -+ adslMibInfo adslMib; -+ -+ /* ADSL state data */ -+ -+ adslMibNotifyHandlerType notifyHandlerPtr; -+ ulong timeSec; -+ ulong timeMs; -+ Boolean currSecondErrored; -+ Boolean currSecondLOS; -+ Boolean currSecondSES; -+ Boolean currSecondFEC; -+ ulong rcvPower; -+ ulong rcvRateBps; -+ ulong xmtRateBps; -+ ulong linkStatus; -+ G992CodingParams rcvParams; -+ G992CodingParams xmtParams; -+ ulong shtCounters[kG992ShowtimeNumOfMonitorCounters]; -+ ulong scratchData; -+ long showtimeMarginThld; -+ -+ /* ADSL diag data */ -+ -+ short snr[kAdslMibMaxToneNum]; -+ short showtimeMargin[kAdslMibMaxToneNum]; -+ uchar bitAlloc[kAdslMibMaxToneNum]; -+ short gain[kAdslMibMaxToneNum]; -+ ComplexShort chanCharLin[kAdslMibMaxToneNum]; -+ short chanCharLog[kAdslMibMaxToneNum]; -+ short quietLineNoise[kAdslMibMaxToneNum]; -+ -+ ushort nTones; -+ uchar nMsgCnt; -+ ulong g992MsgType; -+ uchar rsOption[1+4]; -+ Boolean rsOptionValid; -+ } -+ adslMibVarsStruct; -+ -+#endif /* AdslMibGlobals */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMib.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMib.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMib.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMib.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,114 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * AdslMib.h -+ * -+ * Description: -+ * This file contains the exported functions and definitions for AdslMib -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.9 $ -+ * -+ * $Id: AdslMib.h,v 1.9 2004/04/12 23:34:52 ilyas Exp $ -+ * -+ * $Log: AdslMib.h,v $ -+ * Revision 1.9 2004/04/12 23:34:52 ilyas -+ * Merged the latest ADSL driver chnages for ADSL2+ -+ * -+ * Revision 1.8 2004/03/03 20:14:05 ilyas -+ * Merged changes for ADSL2+ from ADSL driver -+ * -+ * Revision 1.7 2003/10/14 00:55:27 ilyas -+ * Added UAS, LOSS, SES error seconds counters. -+ * Support for 512 tones (AnnexI) -+ * -+ * Revision 1.6 2003/07/18 19:07:15 ilyas -+ * Merged with ADSL driver -+ * -+ * Revision 1.5 2002/10/31 20:27:13 ilyas -+ * Merged with the latest changes for VxWorks/Linux driver -+ * -+ * Revision 1.4 2002/07/20 00:51:41 ilyas -+ * Merged witchanges made for VxWorks/Linux driver. -+ * -+ * Revision 1.3 2002/01/13 22:25:40 ilyas -+ * Added functions to get channels rate -+ * -+ * Revision 1.2 2002/01/03 06:03:36 ilyas -+ * Handle byte moves tha are not multiple of 2 -+ * -+ * Revision 1.1 2001/12/21 22:39:30 ilyas -+ * Added support for ADSL MIB data objects (RFC2662) -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef AdslMibHeader -+#define AdslMibHeader -+ -+#if defined(_CFE_) -+#include "lib_types.h" -+#include "lib_string.h" -+#endif -+ -+#include "AdslMibDef.h" -+ -+/* Interface functions */ -+ -+typedef int (SM_DECL *adslMibNotifyHandlerType) (void *gDslVars, ulong event); -+ -+extern Boolean AdslMibInit(void *gDslVars); -+extern void AdslMibTimer(void *gDslVars, long timeMs); -+extern void AdslMibStatusSnooper (void *gDslVars, dslStatusStruct *status); -+extern void AdslMibSetNotifyHandler(void *gDslVars, adslMibNotifyHandlerType notifyHandlerPtr); -+extern int AdslMibGetModulationType(void *gDslVars); -+extern Boolean AdslMibIsAdsl2Mod(void *gDslVars); -+extern int AdslMibGetActiveChannel(void *gDslVars); -+extern int AdslMibGetGetChannelRate(void *gDslVars, int dir, int channel); -+extern Boolean AdslMibIsLinkActive(void *gDslVars); -+extern int AdslMibPowerState(void *gDslVars); -+extern int AdslMibTrainingState (void *gDslVars); -+extern void AdslMibClearData(void *gDslVars); -+extern void AdslMibClearBertResults(void *gDslVars); -+extern void AdslMibBertStartEx(void *gDslVars, ulong bertSec); -+extern void AdslMibBertStopEx(void *gDslVars); -+extern ulong AdslMibBertContinueEx(void *gDslVars, ulong totalBits, ulong errBits); -+extern void AdslMibSetLPR(void *gDslVars); -+extern void AdslMibSetShowtimeMargin(void *gDslVars, long showtimeMargin); -+extern void AdslMibResetConectionStatCounters(void *gDslVars); -+ -+extern void AdslMibByteMove (int size, void* srcPtr, void* dstPtr); -+extern void AdslMibByteClear(int size, void* dstPtr); -+extern int AdslMibStrCopy(char *srcPtr, char *dstPtr); -+ -+/* AdslMibGetData dataId codes */ -+ -+#define kAdslMibDataAll 0 -+ -+extern void *AdslMibGetData (void *gDslVars, int dataId, void *pAdslMibData); -+ -+extern int AdslMibGetObjectValue ( -+ void *gDslVars, -+ uchar *objId, -+ int objIdLen, -+ uchar *dataBuf, -+ ulong *dataBufLen); -+ -+#endif /* AdslMibHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMibOid.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMibOid.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMibOid.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMibOid.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,177 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * AdslMibOid.h -+ * -+ * Description: -+ * SNMP object identifiers for ADSL MIB and other related MIBs -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.5 $ -+ * -+ * $Id: AdslMibOid.h,v 1.5 2004/06/04 18:56:01 ilyas Exp $ -+ * -+ * $Log: AdslMibOid.h,v $ -+ * Revision 1.5 2004/06/04 18:56:01 ilyas -+ * Added counter for ADSL2 framing and performance -+ * -+ * Revision 1.4 2003/10/17 21:02:12 ilyas -+ * Added more data for ADSL2 -+ * -+ * Revision 1.3 2003/10/14 00:55:27 ilyas -+ * Added UAS, LOSS, SES error seconds counters. -+ * Support for 512 tones (AnnexI) -+ * -+ * Revision 1.2 2002/07/20 00:51:41 ilyas -+ * Merged witchanges made for VxWorks/Linux driver. -+ * -+ * Revision 1.1 2001/12/21 22:39:30 ilyas -+ * Added support for ADSL MIB data objects (RFC2662) -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef AdslMibOidHeader -+#define AdslMibOidHeader -+ -+#define kOidAdsl 94 -+#define kOidAdslInterleave 124 -+#define kOidAdslFast 125 -+#define kOidAtm 37 -+ -+#define kOidAdslLine 1 -+#define kOidAdslMibObjects 1 -+ -+#define kOidAdslLineTable 1 -+#define kOidAdslLineEntry 1 -+#define kOidAdslLineCoding 1 -+#define kOidAdslLineType 2 -+#define kOidAdslLineSpecific 3 -+#define kOidAdslLineConfProfile 4 -+#define kOidAdslLineAlarmConfProfile 5 -+ -+#define kOidAdslAtucPhysTable 2 -+#define kOidAdslAturPhysTable 3 -+#define kOidAdslPhysEntry 1 -+#define kOidAdslPhysInvSerialNumber 1 -+#define kOidAdslPhysInvVendorID 2 -+#define kOidAdslPhysInvVersionNumber 3 -+#define kOidAdslPhysCurrSnrMgn 4 -+#define kOidAdslPhysCurrAtn 5 -+#define kOidAdslPhysCurrStatus 6 -+#define kOidAdslPhysCurrOutputPwr 7 -+#define kOidAdslPhysCurrAttainableRate 8 -+ -+#define kOidAdslAtucChanTable 4 -+#define kOidAdslAturChanTable 5 -+#define kOidAdslChanEntry 1 -+#define kOidAdslChanInterleaveDelay 1 -+#define kOidAdslChanCurrTxRate 2 -+#define kOidAdslChanPrevTxRate 3 -+#define kOidAdslChanCrcBlockLength 4 -+ -+#define kOidAdslAtucPerfDataTable 6 -+#define kOidAdslAturPerfDataTable 7 -+#define kOidAdslPerfDataEntry 1 -+#define kOidAdslPerfLofs 1 -+#define kOidAdslPerfLoss 2 -+#define kOidAdslPerfLprs 3 -+#define kOidAdslPerfESs 4 -+#define kOidAdslPerfValidIntervals 5 -+#define kOidAdslPerfInvalidIntervals 6 -+#define kOidAdslPerfCurr15MinTimeElapsed 7 -+#define kOidAdslPerfCurr15MinLofs 8 -+#define kOidAdslPerfCurr15MinLoss 9 -+#define kOidAdslPerfCurr15MinLprs 10 -+#define kOidAdslPerfCurr15MinESs 11 -+#define kOidAdslPerfCurr1DayTimeElapsed 12 -+#define kOidAdslPerfCurr1DayLofs 13 -+#define kOidAdslPerfCurr1DayLoss 14 -+#define kOidAdslPerfCurr1DayLprs 15 -+#define kOidAdslPerfCurr1DayESs 16 -+#define kOidAdslPerfPrev1DayMoniSecs 17 -+#define kOidAdslPerfPrev1DayLofs 18 -+#define kOidAdslPerfPrev1DayLoss 19 -+#define kOidAdslPerfPrev1DayLprs 20 -+#define kOidAdslPerfPrev1DayESs 21 -+ -+#define kOidAdslAtucPerfIntervalTable 8 -+#define kOidAdslAturPerfIntervalTable 9 -+#define kOidAdslPerfIntervalEntry 1 -+#define kOidAdslIntervalNumber 1 -+#define kOidAdslIntervalLofs 2 -+#define kOidAdslIntervalLoss 3 -+#define kOidAdslIntervalLprs 4 -+#define kOidAdslIntervalESs 5 -+#define kOidAdslIntervalValidData 6 -+ -+#define kOidAdslAtucChanPerfTable 10 -+#define kOidAdslAturChanPerfTable 11 -+#define kOidAdslChanPerfEntry 1 -+#define kOidAdslChanReceivedBlks 1 -+#define kOidAdslChanTransmittedBlks 2 -+#define kOidAdslChanCorrectedBlks 3 -+#define kOidAdslChanUncorrectBlks 4 -+#define kOidAdslChanPerfValidIntervals 5 -+#define kOidAdslChanPerfInvalidIntervals 6 -+#define kOidAdslChanPerfCurr15MinTimeElapsed 7 -+#define kOidAdslChanPerfCurr15MinReceivedBlks 8 -+#define kOidAdslChanPerfCurr15MinTransmittedBlks 9 -+#define kOidAdslChanPerfCurr15MinCorrectedBlks 10 -+#define kOidAdslChanPerfCurr15MinUncorrectBlks 11 -+#define kOidAdslChanPerfCurr1DayTimeElapsed 12 -+#define kOidAdslChanPerfCurr1DayReceivedBlks 13 -+#define kOidAdslChanPerfCurr1DayTransmittedBlks 14 -+#define kOidAdslChanPerfCurr1DayCorrectedBlks 15 -+#define kOidAdslChanPerfCurr1DayUncorrectBlks 16 -+#define kOidAdslChanPerfPrev1DayMoniSecs 17 -+#define kOidAdslChanPerfPrev1DayReceivedBlks 18 -+#define kOidAdslChanPerfPrev1DayTransmittedBlks 19 -+#define kOidAdslChanPerfPrev1DayCorrectedBlks 20 -+#define kOidAdslChanPerfPrev1DayUncorrectBlks 21 -+ -+#define kOidAdslAtucChanIntervalTable 12 -+#define kOidAdslAturChanIntervalTable 13 -+#define kOidAdslChanIntervalEntry 1 -+#define kOidAdslChanIntervalNumber 1 -+#define kOidAdslChanIntervalReceivedBlks 2 -+#define kOidAdslChanIntervalTransmittedBlks 3 -+#define kOidAdslChanIntervalCorrectedBlks 4 -+#define kOidAdslChanIntervalUncorrectBlks 5 -+#define kOidAdslChanIntervalValidData 6 -+ -+/* AdslExtra OIDs for kOidAdslPrivate, kOidAdslPrivExtraInfo (defined in AdslMibDef.h) */ -+ -+#define kOidAdslExtraConnectionInfo 1 -+#define kOidAdslExtraConnectionStat 2 -+#define kOidAdslExtraFramingMode 3 -+#define kOidAdslExtraTrainingState 4 -+#define kOidAdslExtraNonStdFramingAdjustK 5 -+#define kOidAdslExtraAtmStat 6 -+#define kOidAdslExtraDiagModeData 7 -+#define kOidAdslExtraAdsl2Info 8 -+#define kOidAdslExtraTxPerfCounterInfo 9 -+ -+#define kOidAtmMibObjects 1 -+#define kOidAtmTcTable 4 -+#define kOidAtmTcEntry 1 -+#define kOidAtmOcdEvents 1 -+#define kOidAtmAlarmState 2 -+ -+#endif /* AdslMibOidHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslXfaceData.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslXfaceData.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslXfaceData.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslXfaceData.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,129 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * AdslXfaceData.h -- ADSL Core interface data structure -+ * -+ * Description: -+ * To be included both in SoftDsl and BcmAdslCore driver -+ * -+ * -+ * Copyright (c) 2000-2001 Broadcom Corporation -+ * All Rights Reserved -+ * No portions of this material may be reproduced in any form without the -+ * written permission of: -+ * Broadcom Corporation -+ * 16215 Alton Parkway -+ * Irvine, California 92619 -+ * All information contained in this document is Broadcom Corporation -+ * company private, proprietary, and trade secret. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.9 $ -+ * -+ * $Id: AdslXfaceData.h,v 1.9 2004/02/03 02:57:22 ilyas Exp $ -+ * -+ * $Log: AdslXfaceData.h,v $ -+ * Revision 1.9 2004/02/03 02:57:22 ilyas -+ * Added PHY feature settings -+ * -+ * Revision 1.8 2003/07/18 04:50:21 ilyas -+ * Added shared buffer for clEoc messages to avoid copying thru command buffer -+ * -+ * Revision 1.7 2003/02/25 00:46:32 ilyas -+ * Added T1.413 EOC vendor ID -+ * -+ * Revision 1.6 2003/02/21 23:29:13 ilyas -+ * Added OEM vendor ID parameter for T1.413 mode -+ * -+ * Revision 1.5 2002/09/13 21:17:12 ilyas -+ * Added pointers to version and build string to OEM interface structure -+ * -+ * Revision 1.4 2002/09/07 04:16:29 ilyas -+ * Fixed HOST to ADSL MIPS SDRAM address translation for relocatable images -+ * -+ * Revision 1.3 2002/09/07 01:43:59 ilyas -+ * Added support for OEM parameters -+ * -+ * Revision 1.2 2002/01/22 19:03:10 khp -+ * -put sdramBaseAddr at end of Xface struct -+ * -+ * Revision 1.1 2002/01/15 06:25:08 ilyas -+ * Initial implementation of ADSL core firmware -+ * -+ ****************************************************************************/ -+ -+#ifndef AdslXfaceDataHeader -+#define AdslXfaceDataHeader -+ -+#include "CircBuf.h" -+ -+typedef struct _AdslXfaceData { -+ stretchBufferStruct sbSta; -+ stretchBufferStruct sbCmd; -+ unsigned long gfcTable[15]; -+ void *sdramBaseAddr; -+} AdslXfaceData; -+ -+/* Shared SDRAM configuration data */ -+ -+#define kAdslOemVendorIdMaxSize 8 -+#define kAdslOemVersionMaxSize 32 -+#define kAdslOemSerNumMaxSize 32 -+#define kAdslOemNonStdInfoMaxSize 64 -+ -+typedef struct _AdslOemSharedData { -+ unsigned long g994VendorIdLen; -+ unsigned long g994XmtNonStdInfoLen; -+ unsigned long g994RcvNonStdInfoLen; -+ unsigned long eocVendorIdLen; -+ unsigned long eocVersionLen; -+ unsigned long eocSerNumLen; -+ unsigned char g994VendorId[kAdslOemVendorIdMaxSize]; -+ unsigned char eocVendorId[kAdslOemVendorIdMaxSize]; -+ unsigned char eocVersion[kAdslOemVersionMaxSize]; -+ unsigned char eocSerNum[kAdslOemSerNumMaxSize]; -+ unsigned char g994XmtNonStdInfo[kAdslOemNonStdInfoMaxSize]; -+ unsigned char g994RcvNonStdInfo[kAdslOemNonStdInfoMaxSize]; -+ char *gDslVerionStringPtr; -+ char *gDslBuildDataStringPtr; -+ unsigned long t1413VendorIdLen; -+ unsigned char t1413VendorId[kAdslOemVendorIdMaxSize]; -+ unsigned long t1413EocVendorIdLen; -+ unsigned char t1413EocVendorId[kAdslOemVendorIdMaxSize]; -+ unsigned long clEocBufLen; -+ unsigned char *clEocBufPtr; -+} AdslOemSharedData; -+ -+/* feature list */ -+ -+#define kAdslPhyAnnexA 0 -+#define kAdslPhyAnnexB 1 -+#define kAdslPhyAnnexC 2 -+#define kAdslPhySADSL 3 -+#define kAdslPhyAdsl2 4 -+#define kAdslPhyAdslG992p3 4 -+#define kAdslPhyAdsl2p 5 -+#define kAdslPhyAdslG992p5 5 -+#define kAdslPhyAnnexI 6 -+#define kAdslPhyAdslReAdsl2 7 -+#define kAdslPhyG992p2Init 8 -+#define kAdslPhyT1P413 9 -+ -+#define AdslFeatureSupported(fa,f) ((fa)[(f) >> 5] & (1 << ((f) & 0x1F))) -+#define AdslFeatureSet(fa,f) (fa)[(f) >> 5] |= (1 << ((f) & 0x1F)) -+ -+#endif /* AdslXfaceDataHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/BlankList.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/BlankList.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/BlankList.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/BlankList.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,87 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * BlankList.h -+ * -+ * Description: -+ * Definition and implementation (via macros and inline functions) -+ * of blank list - list of unused items of any size (not less than -+ * sizeof(void *) -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ *****************************************************************************/ -+ -+#ifndef BlankListHeader -+#define BlankListHeader -+ -+#define BlankListPeek(head) ((void *) (head)) -+#define BlankListNext(p) (*(void **) (p)) -+ -+#define BlankListAdd(pHead,p) do { \ -+ BlankListNext(p) = BlankListNext(pHead); \ -+ BlankListNext(pHead) = (void *) (p); \ -+} while (0) -+ -+#define BlankListAddList(pHead,pFirst,pLast) do { \ -+ if (NULL != (pLast)) { \ -+ BlankListNext(pLast) = BlankListNext(pHead); \ -+ BlankListNext(pHead) = (void *) (pFirst); \ -+ } \ -+} while (0) -+ -+#define BlankListGet(pHead) \ -+ BlankListNext(pHead); \ -+ { \ -+ void **__p; \ -+ __p = (void **) BlankListNext(pHead); \ -+ if (NULL != __p) \ -+ BlankListNext(pHead) = *__p; \ -+ } -+ -+ -+#define BlankListForEach(pHead,f,ref) do { \ -+ void *p = BlankListNext(pHead); \ -+ \ -+ while (NULL != p) { \ -+ if ( (f)((p), ref) ) break; \ -+ p = BlankListNext(p); \ -+ } \ -+} while (0) -+ -+ -+#include "Que.h" -+ -+#define BlankListAddQue(pHead,pqHdr) do { \ -+ if (NULL != ((QueHeader *)(pqHdr))->tail) { \ -+ BlankListNext(((QueHeader *)(pqHdr))->tail) = BlankListNext(pHead); \ -+ BlankListNext(pHead) = ((QueHeader *)(pqHdr))->head; \ -+ } \ -+} while (0) -+ -+#include "DList.h" -+ -+#define BlankListAddDList(pHead,pDListHead) do { \ -+ if (!DListEmpty(pDListHead)) { \ -+ BlankListNext(DListLast(pDListHead)) = BlankListNext(pHead); \ -+ BlankListNext(pHead) = DListFirst(pDListHead); \ -+ } \ -+} while (0) -+ -+#endif /* BlankListHeader */ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/BlockUtil.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/BlockUtil.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/BlockUtil.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/BlockUtil.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,235 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/* BlockUtil.h -+ * -+ * Description: -+ * This file contains the interfaces for the fixed point block -+ * processing utilities. -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Mark Gonikberg, Haixiang Liang. -+ * -+ * $Revision: 1.23 $ -+ * -+ * $Id: BlockUtil.h,v 1.23 2004/04/13 00:31:10 ilyas Exp $ -+ * -+ * $Log: BlockUtil.h,v $ -+ * Revision 1.23 2004/04/13 00:31:10 ilyas -+ * Added standard header for shared ADSL driver files -+ * -+ * Revision 1.22 2003/07/11 01:49:01 gsyu -+ * Added BlockShortClearByLong to speed up performance -+ * -+ * Revision 1.21 2003/07/10 22:35:23 gsyu -+ * Speed up BlockByteXXX performance -+ * -+ * Revision 1.20 2003/07/10 22:15:51 gsyu -+ * Added BlockByteMoveByWord to speed up performance -+ * -+ * Revision 1.19 2002/03/12 00:03:03 yongbing -+ * Modify cplxScaleCplxSymbols to accept a shift value instead of an array of shifts -+ * -+ * Revision 1.18 2001/03/14 00:50:25 georgep -+ * All targets use FEQ_PASS_FFTSHIFT, remove code for case where its not defined -+ * -+ * Revision 1.17 2000/11/30 03:54:09 khp -+ * -BlockRealScaleCplxSymbols instead of BlockScaleComplexSymbols -+ * -+ * Revision 1.16 2000/11/29 20:42:12 liang -+ * Add function for ADSL xmt gains with fixed shift. -+ * -+ * Revision 1.15 2000/10/02 19:24:08 georgep -+ * Modify FEQ for new fft, fft outputs a shift for each block -+ * -+ * Revision 1.14 2000/09/09 00:23:48 liang -+ * Add corresponding functions for the ComplexLong FEQ coef. -+ * -+ * Revision 1.13 2000/05/17 01:36:52 yongbing -+ * Add Pentium MMX assembly codes for more block related functions -+ * -+ * Revision 1.12 2000/04/19 19:22:22 yongbing -+ * Add BlockShortScaleby2 function used in G994p1 -+ * -+ * Revision 1.11 2000/04/04 02:28:01 liang -+ * Merged with SoftDsl_0_2 from old tree. -+ * -+ * Revision 1.11 2000/03/14 23:29:01 yongbing -+ * Add Pentim MMX codes for BlockCplxSymbolUpdateCplxScale function -+ * -+ * Revision 1.10 2000/02/16 01:53:00 yongbing -+ * Add Pentium MMX module for FEQ -+ * -+ * Revision 1.9 1999/11/02 02:49:55 liang -+ * Add BlockComplexPower function. -+ * -+ * Revision 1.8 1999/08/05 19:42:34 liang -+ * Merged with the softmodem top of the tree on 08/04/99 for assembly files. -+ * -+ * Revision 1.7 1999/06/16 00:54:39 liang -+ * BlockRealScaleComplexSymbols takes a scale shift buffer now. -+ * -+ * Revision 1.6 1999/05/22 02:18:29 liang -+ * Add one more parameter to BlockCplxSymbolUpdateCplxScale function. -+ * -+ * Revision 1.5 1999/05/14 22:49:39 liang -+ * Added two more functions. -+ * -+ * Revision 1.4 1999/03/26 03:29:57 liang -+ * Add function BlockComplexMultLongAcc. -+ * -+ * Revision 1.3 1999/02/22 22:40:59 liang -+ * BlockByteSum takes uchar inputs instead of schar. -+ * -+ * Revision 1.2 1999/02/10 01:56:44 liang -+ * Added BlockByteSum, BlockRealScaleComplexSymbols and BlockCplxScaleComplexSymbols. -+ * -+ * Revision 1.1 1998/10/28 01:35:38 liang -+ * *** empty log message *** -+ * -+ * Revision 1.12 1998/07/08 17:09:25 scott -+ * Removed unnecessary undefs -+ * -+ * Revision 1.11 1998/04/02 06:19:44 mwg -+ * Added two new utilities. -+ * -+ * Revision 1.10 1998/03/26 23:20:55 liang -+ * Added function BlockShortMultiply. -+ * -+ * Revision 1.9 1998/02/16 18:41:00 scott -+ * Added MMX autodetect support -+ * -+ * Revision 1.8 1997/12/13 06:11:35 mwg -+ * Added new functions: -+ * BlockLongSubtract() -+ * BlockLongAdd() -+ * BlockLong2ShortSubtract() -+ * BlockShort2LongMove() -+ * BlockShortInterpolate() -+ * BlockLongCorrelate() -+ * BlockMapShort2Short() -+ * -+ * Revision 1.7 1997/03/19 18:35:10 mwg -+ * Changed copyright notice. -+ * -+ * Revision 1.6 1997/02/11 00:08:18 mwg -+ * Added BlockByteMove function -+ * -+ * Revision 1.5 1997/02/04 08:40:08 mwg -+ * Changed interface forBlockReal2ComplexMacc() -+ * -+ * Revision 1.4 1997/01/23 02:04:28 mwg -+ * Added return value to BlockShortMove -+ * -+ * Revision 1.3 1996/12/19 22:34:55 mwg -+ * Added new function BlockFullPower(). -+ * -+ * Revision 1.2 1996/02/21 03:59:15 mwg -+ * Added new function BlockReal2ComplexMacc -+ * -+ * Revision 1.1.1.1 1996/02/14 02:35:13 mwg -+ * Redesigned the project directory structure. Merged V.34 into the project. -+ * -+ * Revision 1.5 1995/04/04 06:09:32 mwg -+ * Changed the SoftModem status reporting: now the status is a structure/union -+ * where different fields used for different status code. This will enable -+ * efficient status snooping for high level protocols on top of the softmodem. -+ * -+ */ -+ -+#ifndef BlockUtilPh -+#define BlockUtilPh -+ -+extern void BlockLongAdd (int, long*, long*, long*); -+extern void BlockLong2ShortSubtract (int, long*, long*, short*); -+extern void BlockShort2LongMove (int, short*, long*); -+extern void BlockShortMultiply (int, int, short*, short*, short*); -+extern void BlockByteMoveUnaligned (int size, uchar *srcPtr, uchar *dstPtr); -+extern void BlockShortOffset (int, short, short*, short*); -+extern long BlockShortInterpolateWithIncrement (int size, long scaleFactor, long increment, int shift, short* src1Ptr, short* src2Ptr, short* dstPtr); -+extern void BlockReal2ComplexMult (int, short*, ComplexShort*, ComplexShort*); -+extern void BlockComplexConjigateMult (int, ComplexShort*, ComplexShort*, ComplexShort*); -+ -+extern long BlockSum (int, short*); -+extern long BlockByteSum (int, uchar*); -+extern void BlockComplexSum (int, ComplexShort*, ComplexLong*); -+extern void BlockComplexPower (int, int, ComplexShort*, long*); -+extern long BlockFullPower (int, short*); -+extern long BlockLongCorrelate (int, long*, long*); -+ -+extern int BlockSymbol2Byte (int, int, ushort*, uchar*); -+extern int BlockByte2Symbol (int, int, uchar*, ushort*); -+ -+extern void BlockMapShort2Complex (int, ushort*, ComplexByte*, ComplexShort*); -+extern void BlockMapShort2Short (int size, ushort *srcPtr, short *mapPtr, short *dstPtr); -+extern void BlockMapByte2Byte (int size, uchar *srcPtr, uchar *mapPtr, uchar *dstPtr); -+extern void BlockMapByte2Short (int size, uchar *srcPtr, short *mapPtr, short *dstPtr); -+extern void BlockShortMult (int size, int shift, short* src1Ptr, short* src2Ptr, short* dstPtr); -+ -+extern int SM_DECL Idle(void); -+ -+extern void BlockGenerateAngles(int size, ComplexShort *anglePtr, ComplexShort *incPtr, ComplexShort *dstPtr); -+extern void BlockExtractRealPart(int size, ComplexShort *srcPtr, short *dstPtr); -+extern void BlockShortScaleByShift (int size, int shift, short* srcPtr, short* dstPtr); -+ -+#ifndef PENTIUM_REDEFS /* only if these have not been redefined to function pointers */ -+extern long BlockPower (int, short*); -+extern void BlockReal2ComplexMacc (int, int, short*, ComplexShort*, ComplexLong*); -+extern void BlockComplexMult (int, ComplexShort*, ComplexShort*, ComplexShort*); -+extern void BlockShortScale (int, short, int, short*, short*); -+extern int SM_DECL BlockShortMove (int, short*, short*); -+extern long BlockCorrelate (int, short*, short*); -+ -+extern void BlockRealScaleComplexSymbols(int, int, uchar*, short*, ComplexShort*, ComplexShort*); -+/* FIXME -- the following 3 functions can be removed */ -+extern void BlockCplxScaleComplexSymbols(int, int, int, ComplexShort*, ComplexShort*, ComplexShort*); -+extern void BlockCplxSymbolUpdateCplxScale(int, int, int, uchar*, ComplexShort*, -+ ComplexShort*, ComplexShort*, ComplexShort*); -+extern void BlockComplexShortFill (int, short, short, ComplexShort*); -+ -+ -+extern void BlockRealScaleCplxSymbols(int, int, int, short*, ComplexShort*, ComplexShort*); -+extern void BlockCplxLongConjigateMultCplxShort(int, ComplexLong*, ComplexShort*, ComplexLong*); -+ -+extern void BlockCplxLongScaleCplxSymbols(int, int, int, ComplexLong*, ComplexShort*, short*, ComplexShort*); -+extern void BlockCplxSymbolUpdateCplxLongScale(int, int, int, int, -+ ComplexShort*, short *, ComplexLong*, ComplexShort*); -+ -+extern void BlockComplexLongFill (int, long, long, ComplexLong*); -+ -+extern void BlockShortSubtract (int, short*, short*, short*); -+extern void BlockLongSubtract (int, long*, long*, long*); -+extern void BlockShortAdd (int, short*, short*, short*); -+extern void BlockByteMove (int, uchar*, uchar*); -+extern void BlockByteMoveByLong (int, uchar*, uchar*); -+extern void SM_DECL BlockByteFill (int, uchar, uchar*); -+extern void BlockByteFillByLong (int, uchar, uchar*); -+extern void BlockByteClear (int, uchar*); -+extern void BlockByteClearByLong (int, uchar*); -+extern void BlockShortFill (int, short, short*); -+extern void BlockShortClear (int, short*); -+extern void BlockShortClearByLong (int, short*); -+extern void BlockLongFill (int, long, long*); -+extern void BlockLongClear (int, long*); -+extern void BlockComplexShortClear (int, ComplexShort*); -+extern void BlockShortInvert (int, short*, short*); -+extern void BlockShortScaleDown (int, short*); -+extern void BlockLongMove (int, long*, long*); -+extern void BlockShortInterpolate (int, short, int, short*, short*, short*); -+extern void BlockComplexMultLongAcc (int, int, ComplexShort*, ComplexShort*, ComplexLong*); -+ -+#endif -+ -+#endif /* BlockUtilPh */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/CircBuf.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/CircBuf.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/CircBuf.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/CircBuf.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,217 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * CircBuf -- Generic Circular Buffer -+ * -+ * Description: -+ * Implementation of generic circular buffer algorithms -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.14 $ -+ * -+ * $Id: CircBuf.h,v 1.14 2004/06/24 03:10:37 ilyas Exp $ -+ * -+ * $Log: CircBuf.h,v $ -+ * Revision 1.14 2004/06/24 03:10:37 ilyas -+ * Added extra macro to be able to use un-cached variable (for status write) -+ * -+ * Revision 1.13 2004/02/09 23:47:02 ilyas -+ * Fixed last change -+ * -+ * Revision 1.12 2004/02/06 22:52:58 ilyas -+ * Improved stretch buffer write -+ * -+ * Revision 1.11 2002/12/30 23:27:55 ilyas -+ * Added macro for HostDma optimizations -+ * -+ * Revision 1.10 2002/10/26 02:15:02 ilyas -+ * Optimized and added new macros for HostDma -+ * -+ * Revision 1.9 2002/01/22 23:59:29 ilyas -+ * Added paraenthesis around macro argument -+ * -+ * Revision 1.8 2002/01/15 22:28:38 ilyas -+ * Extended macro to support readPtr from uncached address -+ * -+ * Revision 1.7 2001/09/21 19:47:05 ilyas -+ * Fixed compiler warnings for VxWorks build -+ * -+ * Revision 1.6 2001/06/07 18:47:56 ilyas -+ * Added more macros for circular buffer arithmetics -+ * -+ * Revision 1.5 2001/04/18 03:58:34 ilyas -+ * Added LOG file write granularity -+ * -+ * Revision 1.4 2001/01/19 04:34:12 ilyas -+ * Added more macros to circular buffer implementation -+ * -+ * Revision 1.3 2001/01/06 04:01:41 ilyas -+ * Changed the way we write status messages -+ * -+ * Revision 1.2 2001/01/04 05:52:21 ilyas -+ * Added implementation of stretchable circular buffer used in LOG and Status -+ * handlers -+ * -+ * Revision 1.1 2000/05/03 03:45:55 ilyas -+ * Original implementation -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef CircBufHeader_H_ -+#define CircBufHeader_H_ -+ -+ -+typedef struct { -+ char *pStart; -+ char *pEnd; -+ char *pRead; -+ char *pWrite; -+} circBufferStruct; -+ -+/* Initialize circular buffer */ -+ -+#define CircBufferInit(pCB,buf,size) do { \ -+ (pCB)->pStart = (char *) (buf); \ -+ (pCB)->pRead = (pCB)->pWrite = (pCB)->pStart; \ -+ (pCB)->pEnd = (pCB)->pStart + size; \ -+} while (0) -+ -+#define CircBufferGetSize(pCB) ((pCB)->pEnd - (pCB)->pStart) -+#define CircBufferGetStartPtr(pCB) ((void *) (pCB)->pStart) -+#define CircBufferGetEndPtr(pCB) ((void *) (pCB)->pEnd) -+ -+#define CircBufferReset(pCB) (pCB)->pRead = (pCB)->pWrite = (pCB)->pStart -+ -+ -+#define CircBufferGetReadPtr(pCB) ((void *) (pCB)->pRead) -+#define CircBufferGetWritePtr(pCB) ((void *) (pCB)->pWrite) -+ -+ -+#ifndef bcm47xx -+#define CircBufferDistance(pCB,p1,p2,d) ((char*)(p2) - (char*)(p1) - d >= 0 ? \ -+ (char*)(p2) - (char*)(p1) - d : \ -+ ((char*)(p2)- (char*)(p1) - d + ((pCB)->pEnd - (pCB)->pStart))) -+ -+#define CircBufferAddContig(pCB,p,n) ((char*)(p) + (n) == (pCB)->pEnd ? (pCB)->pStart : (char*)(p) + (n)) -+#else -+static __inline int CircBufferDistance(circBufferStruct *pCB, char *p1, char *p2, int d) -+{ -+ int tmp = p2 - p1 - d; -+ -+ return (tmp >= 0 ? tmp : tmp + (pCB->pEnd - pCB->pStart)); -+} -+ -+static __inline char * CircBufferAddContig(circBufferStruct *pCB, char *p, int n) -+{ -+ p += n; -+ return (p == pCB->pEnd ? pCB->pStart : p); -+} -+#endif -+ -+#define CircBufferAdd(pCB,p,n) ((char*)(p) + (n) >= (pCB)->pEnd ? \ -+ (pCB)->pStart + ((char*)(p) + (n) - (pCB)->pEnd) : \ -+ (char*)(p) + (n)) -+ -+#define CircBufferReadUpdate(pCB,n) (pCB)->pRead = CircBufferAdd(pCB,(pCB)->pRead,n) -+#define CircBufferWriteUpdate(pCB,n) (pCB)->pWrite= CircBufferAdd(pCB,(pCB)->pWrite,n) -+ -+#define CircBufferReadUpdateContig(pCB,n) (pCB)->pRead = CircBufferAddContig(pCB,(pCB)->pRead,n) -+#define CircBufferWriteUpdateContig(pCB,n) (pCB)->pWrite= CircBufferAddContig(pCB,(pCB)->pWrite,n) -+ -+#define CircBufferGetReadAvail(pCB) CircBufferDistance(pCB,(pCB)->pRead,(pCB)->pWrite,0) -+#define CircBufferIsReadEmpty(pCB) ((pCB)->pRead == (pCB)->pWrite) -+#define CircBufferGetWriteAvail(pCB) CircBufferDistance(pCB,(pCB)->pWrite,(pCB)->pRead,1) -+#define CircBufferGetWriteAvailN(pCB,n) CircBufferDistance(pCB,(pCB)->pWrite,(pCB)->pRead,n) -+ -+#define CircBufferGetReadContig(pCB) ((unsigned long)(pCB)->pWrite >= (unsigned long) (pCB)->pRead ? \ -+ (pCB)->pWrite - (pCB)->pRead : \ -+ (pCB)->pEnd - (pCB)->pRead) -+ -+#define CircBufferGetWriteContig(pCB) ((pCB)->pEnd - (pCB)->pWrite > CircBufferGetWriteAvail(pCB) ? \ -+ CircBufferGetWriteAvail(pCB) : \ -+ (pCB)->pEnd - (pCB)->pWrite) -+ -+/* -+** -+** structure and macros for "strectch" buffer -+** -+*/ -+ -+typedef struct { -+ char *pStart; -+ char *pEnd; -+ char *pExtraEnd; -+ char *pStretchEnd; -+ char *pRead; -+ char *pWrite; -+} stretchBufferStruct; -+ -+#define StretchBufferInit(pSB,buf,size,extra) do { \ -+ (pSB)->pStart = (char *) (buf); \ -+ (pSB)->pRead = (pSB)->pWrite = (pSB)->pStart; \ -+ (pSB)->pEnd = (pSB)->pStart + (size); \ -+ (pSB)->pStretchEnd = (pSB)->pEnd; \ -+ (pSB)->pExtraEnd = (pSB)->pEnd+(extra); \ -+} while (0) -+ -+#define StretchBufferGetSize(pSB) ((pSB)->pEnd - (pSB)->pStart) -+#define StretchBufferGetStartPtr(pSB) ((void *) (pSB)->pStart) -+#define StretchBufferGetReadPtr(pSB) ((void *) (pSB)->pRead) -+#define StretchBufferGetWritePtr(pSB) ((void *) (pSB)->pWrite) -+#define StretchBufferReset(pSB) ((pSB)->pRead = (pSB)->pWrite = (pSB)->pStart) -+ -+#define StretchBufferGetReadToEnd(pSB) ((pSB)->pStretchEnd - (pSB)->pRead) -+ -+#define StretchBufferGetReadAvail(pSB) ((pSB)->pWrite - (pSB)->pRead >= 0 ? \ -+ (pSB)->pWrite - (pSB)->pRead : \ -+ (pSB)->pStretchEnd - (pSB)->pRead) -+#define _StretchBufferGetWriteAvail(pSB,rd) ((rd) - (pSB)->pWrite > 0 ? \ -+ (rd) - (pSB)->pWrite - 1 : \ -+ ((pSB)->pExtraEnd - (pSB)->pWrite)) -+#define StretchBufferGetWriteAvail(pSB) _StretchBufferGetWriteAvail(pSB, (pSB)->pRead) -+ -+#define StretchBufferReadUpdate(pSB,n) do { \ -+ char *p; \ -+ \ -+ p = (pSB)->pRead + (n); \ -+ (pSB)->pRead = (p >= (pSB)->pStretchEnd ? (pSB)->pStart : p); \ -+} while (0) -+ -+#define _StretchBufferWriteUpdate(pSB,rd,n) do { \ -+ char *p; \ -+ \ -+ p = (pSB)->pWrite + (n); \ -+ if (p >= (pSB)->pEnd) { \ -+ if ((rd) != (pSB)->pStart) { \ -+ (pSB)->pStretchEnd = p; \ -+ (pSB)->pWrite = (pSB)->pStart; \ -+ } \ -+ } \ -+ else \ -+ (pSB)->pWrite = p; \ -+} while (0) -+ -+#define StretchBufferWriteUpdate(pSB,n) _StretchBufferWriteUpdate(pSB,(pSB)->pRead,n) -+ -+#endif /* CircBufHeader_H_ */ -+ -+ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/DList.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/DList.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/DList.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/DList.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,131 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * DList.h -+ * -+ * Description: -+ * Definition and implementation (via macros and inline functions) -+ * of double-linked list -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ *****************************************************************************/ -+ -+#ifndef DListHeader_H_ -+#define DListHeader_H_ -+ -+typedef struct _DListHeader -+ { -+ struct _DListHeader *next; /* next item in the list */ -+ struct _DListHeader *prev; /* prev item in the list */ -+ } DListHeader; -+ -+typedef struct _DListUpHeader -+ { -+ struct _DListUpHeader *next; /* next item in the list */ -+ struct _DListUpHeader *prev; /* prev item in the list */ -+ struct _DListUpHeader *head; /* head of the list */ -+ } DListUpHeader; -+ -+/* Double linked list DList management macros */ -+ -+#define DListInit(pDListHead) do { \ -+ ((DListHeader *)(pDListHead))->next = pDListHead; \ -+ ((DListHeader *)(pDListHead))->prev = pDListHead; \ -+} while (0) -+ -+#define DListNext(pDListEntry) (((DListHeader *)(pDListEntry))->next) -+#define DListPrev(pDListEntry) (((DListHeader *)(pDListEntry))->prev) -+ -+#define DListEntryLinked(pDListEntry) (NULL != DListNext(pDListEntry)) -+#define DListUnlinkEntry(pDListEntry) (DListNext(pDListEntry) = DListPrev(pDListEntry) = NULL) -+ -+#define DListFirst(pDListHead) DListNext(pDListHead) -+#define DListLast(pDListHead) DListPrev(pDListHead) -+#define DListValid(pDListHead,pEntry) ((void *)(pDListHead) != (pEntry)) -+#define DListEmpty(pDListHead) ((void *)pDListHead == ((DListHeader *)pDListHead)->next) -+ -+#define DListInsertAfter(pDListEntry,pEntry) do { \ -+ ((DListHeader *)(pEntry))->next = ((DListHeader *)(pDListEntry))->next; \ -+ ((DListHeader *)(pEntry))->prev = (DListHeader *)(pDListEntry); \ -+ ((DListHeader *)(pDListEntry))->next->prev = (DListHeader *) (pEntry); \ -+ ((DListHeader *)(pDListEntry))->next = (DListHeader *) (pEntry); \ -+} while (0) -+ -+#define DListInsertBefore(pDListEntry,pEntry) do { \ -+ ((DListHeader *)(pEntry))->next = (DListHeader *)(pDListEntry); \ -+ ((DListHeader *)(pEntry))->prev = ((DListHeader *)(pDListEntry))->prev; \ -+ ((DListHeader *)(pDListEntry))->prev->next = (DListHeader *) (pEntry); \ -+ ((DListHeader *)(pDListEntry))->prev = (DListHeader *) (pEntry); \ -+} while (0) -+ -+#define DListInsertTail(pDListHead,pEntry) DListInsertBefore(pDListHead,pEntry) -+#define DListInsertHead(pDListHead,pEntry) DListInsertAfter(pDListHead,pEntry) -+ -+#define DListRemove(pDListEntry) do { \ -+ ((DListHeader *)(pDListEntry))->prev->next = ((DListHeader *)(pDListEntry))->next; \ -+ ((DListHeader *)(pDListEntry))->next->prev = ((DListHeader *)(pDListEntry))->prev; \ -+} while (0) -+ -+ -+#define DListForEach(pDListHead,f,ref) do { \ -+ DListHeader *p = ((DListHeader *)(pDListHead))->next; \ -+ \ -+ while (DListValid(pDListHead,p)) { \ -+ DListHeader *p0 = p; \ -+ p = DListNext(p); \ -+ if ( (f)((void *)p0, ref) ) break; \ -+ } \ -+} while (0) -+ -+ -+/* Double linked list with up link DListUp management macros */ -+ -+#define DListUpInit(pDListHead) do { \ -+ ((DListUpHeader *)(pDListHead))->next = (DListUpHeader *) (pDListHead); \ -+ ((DListUpHeader *)(pDListHead))->prev = (DListUpHeader *) (pDListHead); \ -+ ((DListUpHeader *)(pDListHead))->head = (DListUpHeader *) (pDListHead); \ -+} while (0) -+ -+#define DListUpNext(pDListEntry) ((DListUpHeader *) DListNext(pDListEntry)) -+#define DListUpPrev(pDListEntry) ((DListUpHeader *) DListPrev(pDListEntry)) -+#define DListUpHead(pDListEntry) (((DListUpHeader *)(pDListEntry))->head) -+ -+#define DListUpFirst(pDListHead) DListUpNext(pDListHead) -+#define DListUpLast(pDListHead) DListUpPrev(pDListHead) -+#define DListUpValid(pEntry) (((DListUpHeader *)(pEntry))->head != (void *) pEntry) -+#define DListUpEmpty(pDListHead) DListEmpty(pDListHead) -+ -+#define DListUpInsertAfter(pDListEntry,pEntry) do { \ -+ DListInsertAfter(pDListEntry,pEntry); \ -+ ((DListUpHeader *)(pEntry))->head = ((DListUpHeader *)(pDListEntry))->head; \ -+} while (0) -+ -+#define DListUpInsertBefore(pDListEntry,pEntry) do { \ -+ DListInsertBefore(pDListEntry,pEntry); \ -+ ((DListUpHeader *)(pEntry))->head = ((DListUpHeader *)(pDListEntry))->head; \ -+} while (0) -+ -+#define DListUpInsertTail(pDListHead,pEntry) DListUpInsertBefore(pDListHead,pEntry) -+#define DListUpInsertHead(pDListHead,pEntry) DListUpInsertAfter(pDListHead,pEntry) -+ -+#define DListUpRemove(pDListEntry) DListRemove(pDListEntry) -+#define DListUpForEach(pDListHead,f,ref) DListForEach((DListHeader *)(pDListHead),f,ref) -+ -+#endif /* DListHeader_H_ */ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/DslFramer.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/DslFramer.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/DslFramer.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/DslFramer.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,159 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * DslFramer.h -+ * -+ * Description: -+ * This file contains common DSL framer definitions -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.3 $ -+ * -+ * $Id: DslFramer.h,v 1.3 2004/07/21 01:39:41 ilyas Exp $ -+ * -+ * $Log: DslFramer.h,v $ -+ * Revision 1.3 2004/07/21 01:39:41 ilyas -+ * Reset entire G.997 state on retrain. Timeout in G.997 if no ACK -+ * -+ * Revision 1.2 2004/04/12 23:41:10 ilyas -+ * Added standard header for shared ADSL driver files -+ * -+ * Revision 1.1 2001/12/13 02:28:27 ilyas -+ * Added common framer (DslPacket and G997) and G997 module -+ * -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef DslFramerHeader -+#define DslFramerHeader -+ -+#include "DList.h" -+ -+#define kDslFramerInitialized 0x80000000 -+ -+/* status codes */ -+ -+#define kDslFramerRxFrame 1 -+#define kDslFramerRxFrameErr 2 -+#define kDslFramerTxFrame 3 -+#define kDslFramerTxFrameErr 4 -+ -+#define kDslFramerRxFrameErrFlushed 1 -+#define kDslFramerRxFrameErrAbort 2 -+#define kDslFramerRxFrameErrPhy 3 -+ -+#define kDslFramerTxFrameErrFlushed 1 -+ -+ -+typedef struct _dslFramerBufDesc { -+ long pkId; -+ long bufFlags; -+ void *bufPtr; -+ long bufLen; -+} dslFramerBufDesc; -+ -+/* data bufDesc flags */ -+ -+#define kDslFramerStartNewFrame 1 -+#define kDslFramerEndOfFrame 2 -+#define kDslFramerAbortFrame 4 -+ -+#define kDslFramerExtraByteShift 3 -+#define kDslFramerExtraByteMask (0x7 << kDslFramerExtraByteShift) -+ -+typedef struct _dslFramerControl { -+ bitMap setup; -+ dslFrameHandlerType rxIndicateHandlerPtr; -+ dslFrameHandlerType txCompleteHandlerPtr; -+ dslStatusHandlerType statusHandlerPtr; -+ ulong statusCode; -+ ulong statusOffset; -+ -+ int nRxBuffers; -+ int nRxBufSize; -+ int nRxPackets; -+ -+ dslFrame *freeBufListPtr; -+ void *freeBufPool; -+ void *pBufMemory; -+ -+ dslFrame *freePacketListPtr; -+ void *freePacketPool; -+ -+ /* RX working data set */ -+ -+ dslFrame *pRxFrame; -+ dslFrameBuffer *pRxBuf; -+ uchar *pRxBufData; -+ uchar *pRxBufDataEnd; -+ int rxFrameLen; -+ -+ /* TX working data set */ -+ -+ DListHeader dlistTxWaiting; -+ dslFrame *pTxFrame; -+ dslFrameBuffer *pTxBuf; -+ uchar *pTxBufData; -+ uchar *pTxBufDataEnd; -+ -+ /* stats data */ -+ -+ ulong dslByteCntRxTotal; -+ ulong dslByteCntTxTotal; -+ -+ ulong dslFrameCntRxTotal; -+ ulong dslFrameCntRxErr; -+ ulong dslFrameCntTxTotal; -+ -+} dslFramerControl; -+ -+ -+extern Boolean DslFramerInit( -+ void *gDslVars, -+ dslFramerControl *dfCtrl, -+ bitMap setup, -+ ulong statusCode, -+ ulong statusOffset, -+ dslFrameHandlerType rxIndicateHandlerPtr, -+ dslFrameHandlerType txCompleteHandlerPtr, -+ dslStatusHandlerType statusHandlerPtr, -+ ulong rxBufNum, -+ ulong rxBufSize, -+ ulong rxPacketNum); -+extern void DslFramerClose(void *gDslVars, dslFramerControl *dfCtrl); -+extern void DslFramerSendFrame(void *gDslVars, dslFramerControl *dfCtrl, dslFrame *pFrame); -+extern void DslFramerReturnFrame(void *gDslVars, dslFramerControl *dfCtrl, dslFrame *pFrame); -+ -+ -+extern Boolean DslFramerRxGetPtr(void *gDslVars, dslFramerControl *dfCtrl, dslFramerBufDesc *pBufDesc); -+extern void DslFramerRxDone (void *gDslVars, dslFramerControl *dfCtrl, dslFramerBufDesc *pBufDesc); -+extern Boolean DslFramerTxGetPtr(void *gDslVars, dslFramerControl *dfCtrl, dslFramerBufDesc *pBufDesc); -+extern void DslFramerTxDone(void *gDslVars, dslFramerControl *dfCtrl, dslFramerBufDesc *pBufDesc); -+extern Boolean DslFramerTxIdle (void *gDslVars, dslFramerControl *dfCtrl); -+extern void DslFramerTxFlush(void *gDslVars, dslFramerControl *dfCtrl); -+ -+extern void * DslFramerGetFramePoolHandler(dslFramerControl *dfCtrl); -+extern void DslFramerClearStat(dslFramerControl *dfCtrl); -+ -+extern void DslFramerRxFlushFrame (void *gDslVars, dslFramerControl *dfCtrl, int errCode); -+extern void DslFramerRxFlush(void *gDslVars, dslFramerControl *dfCtrl); -+ -+#endif /* DslFramerHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/Flatten.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/Flatten.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/Flatten.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/Flatten.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,115 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * Flatten.h -- Header for Flatten/Unflatten command/status -+ * -+ * Copyright (c) 1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.14 $ -+ * -+ * $Id: Flatten.h,v 1.14 2004/03/04 19:48:52 linyin Exp $ -+ * -+ * $Log: Flatten.h,v $ -+ * Revision 1.14 2004/03/04 19:48:52 linyin -+ * Support adsl2plus -+ * -+ * Revision 1.13 2003/10/17 22:45:14 yongbing -+ * Increase buffer size for large B&G table of G992P3 -+ * -+ * Revision 1.12 2003/08/12 23:16:26 khp -+ * - for Haixiang: added support for ADSL_MARGIN_TWEAK_TEST -+ * -+ * Revision 1.11 2003/02/27 06:33:03 ilyas -+ * Improved free space checking in command buffer (became a problem with -+ * 2 commands SetXmtgain and StartPhy) -+ * -+ * Revision 1.10 2003/01/11 01:27:07 ilyas -+ * Improved checking for available space in status buffer -+ * -+ * Revision 1.9 2002/09/07 01:43:59 ilyas -+ * Added support for OEM parameters -+ * -+ * Revision 1.8 2002/05/16 00:01:52 khp -+ * -added missing #endif -+ * -+ * Revision 1.7 2002/05/15 00:04:48 mprahlad -+ * increase the status buffer size - prevent memory overflow for annexC cases -+ * -+ * Revision 1.6 2002/04/05 04:10:33 linyin -+ * -hack to fit in Annex C firmware in LMEM -+ * -+ * Revision 1.5 2002/04/05 02:45:25 linyin -+ * Make the buffer side larger for annexC -+ * -+ * Revision 1.4 2002/01/30 07:19:06 ilyas -+ * Moved showtime code to LMEM -+ * -+ * Revision 1.3 2001/08/29 02:56:01 ilyas -+ * Added tests for flattening/unflatenning command and statuses (dual mode) -+ * -+ * Revision 1.2 2001/04/25 00:30:54 ilyas -+ * Adjusted MaxFrameLen -+ * -+ * Revision 1.1 2001/04/24 21:41:21 ilyas -+ * Implemented status flattening/unflattaning to transfer statuses between -+ * modules asynchronously through the circular buffer -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef _Flatten_H_ -+#define _Flatten_H_ -+ -+#include "CircBuf.h" -+ -+#ifdef ADSL_MARGIN_TWEAK_TEST -+#define kMaxFlattenedCommandSize 272 /* maximum no. of bytes in flattened cmd */ -+#else -+#define kMaxFlattenedCommandSize 128 /* maximum no. of bytes in flattened cmd */ -+#endif -+#if defined(G992_ANNEXC) || defined(G992P3) -+#if defined(G992P5) -+#define kMaxFlattenedStatusSize 2200 /* maximum no. of bytes in flattened status */ -+#else -+#define kMaxFlattenedStatusSize 1100 /* maximum no. of bytes in flattened status */ -+#endif -+#else -+#define kMaxFlattenedStatusSize 550 /* maximum no. of bytes in flattened status */ -+#endif -+ -+#define kMaxFlattenFramelength (kMaxFlattenedStatusSize - (4*sizeof(long)) - 20) -+ -+extern int SM_DECL FlattenCommand (dslCommandStruct *cmd, ulong *dstPtr, ulong nAvail); -+extern int SM_DECL UnflattenCommand(ulong *srcPtr, dslCommandStruct *cmd); -+extern int SM_DECL FlattenStatus (dslStatusStruct *status, ulong *dstPtr, ulong nAvail); -+extern int SM_DECL UnflattenStatus (ulong *srcPtr, dslStatusStruct *status); -+ -+#define FlattenBufferInit(fb,fbData,bufSize,itemSize) \ -+ StretchBufferInit(fb, fbData, bufSize, itemSize) -+ -+extern int SM_DECL FlattenBufferStatusWrite(stretchBufferStruct *fBuf, dslStatusStruct *status); -+extern int SM_DECL FlattenBufferStatusRead(stretchBufferStruct *fBuf, dslStatusStruct *status); -+ -+extern int SM_DECL FlattenBufferCommandWrite(stretchBufferStruct *fBuf, dslCommandStruct *cmd); -+extern int SM_DECL FlattenBufferCommandRead(stretchBufferStruct *fBuf, dslCommandStruct *cmd); -+ -+#define FlattenBufferReadComplete(fb,nBytes) \ -+ StretchBufferReadUpdate (fb, nBytes) -+ -+#endif /* _Flatten_H_ */ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G992p3OvhMsg.gh linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G992p3OvhMsg.gh ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G992p3OvhMsg.gh 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G992p3OvhMsg.gh 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,110 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * G992p3OvhMsg.gh -+ * -+ * Description: -+ * This is a header file which defines the type for the G992p3 overhead -+ * channel messages global variable structure. -+ * -+ * -+ * Copyright (c) 1999-2003 BroadCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.5 $ -+ * -+ * $Id: G992p3OvhMsg.gh,v 1.5 2004/09/11 03:52:25 ilyas Exp $ -+ * -+ * $Log: G992p3OvhMsg.gh,v $ -+ * Revision 1.5 2004/09/11 03:52:25 ilyas -+ * Added support for overhead message segmentation -+ * -+ * Revision 1.4 2004/07/07 01:27:20 ilyas -+ * Fixed OHC message stuck problem on L2 entry/exit -+ * -+ * Revision 1.3 2004/06/10 00:13:31 ilyas -+ * Added L2/L3 and SRA -+ * -+ * Revision 1.2 2004/04/12 23:34:52 ilyas -+ * Merged the latest ADSL driver chnages for ADSL2+ -+ * -+ * Revision 1.1 2003/07/18 19:39:18 ilyas -+ * Initial G.992.3 overhead channel message implementation (from ADSL driver) -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef G992p3OvhMsgFramerGlobals -+#define G992p3OvhMsgFramerGlobals -+ -+#define kG992p3OvhMsgMaxCmdSize (16 + 16) -+#define kG992p3OvhMsgMaxRspSize (16 + 2*512) -+ -+typedef struct -+ { -+ dslFrame *segFrame; -+ dslFrameBuffer *segFrBufCur; -+ dslFrameBuffer segFrBuf; -+ ulong timeSegOut; -+ uchar tryCnt; -+ uchar segTotal; -+ uchar segId; -+ } -+ g992p3SegFrameCtlStruct; -+ -+typedef struct -+ { -+ bitMap setup; -+ dslFrameHandlerType rxReturnFramePtr; -+ dslFrameHandlerType txSendFramePtr; -+ dslCommandHandlerType cmdHandlerPtr; -+ dslStatusHandlerType statusHandlerPtr; -+ -+ dslFrame txRspFrame; -+ dslFrameBuffer txRspFrBuf; -+ dslFrameBuffer txRspFrBuf1; -+ uchar txRspBuf[kG992p3OvhMsgMaxRspSize]; -+ dslFrame txPwrRspFrame; -+ dslFrameBuffer txPwrRspFrBuf0; -+ dslFrameBuffer txPwrRspFrBuf0a; -+ dslFrameBuffer txPwrRspFrBuf1; -+ uchar txPwrRspBuf0[8]; -+ dslFrame txCmdFrame; -+ dslFrameBuffer txCmdFrBuf0; -+ dslFrameBuffer txCmdFrBuf0a; -+ dslFrameBuffer txCmdFrBuf1; -+ uchar txCmdBuf[kG992p3OvhMsgMaxCmdSize]; -+ g992p3SegFrameCtlStruct txSegFrameCtl; -+ ulong txFlags; -+ uchar txL0Rq; -+ uchar txL3Rq; -+ -+ ulong timeMs; -+ ulong timeCmdOut; -+ ulong cmdTryCnt; -+ ulong cmdNum; -+ ulong timeRspOut; -+ uchar *txPmdCmd; -+ -+ uchar rxCmdMsgNum; -+ uchar rxRspMsgNum; -+ uchar txCmdMsgNum; -+ uchar txRspMsgNum; -+ } -+ g992p3OvhMsgVarsStruct; -+ -+#endif /* G992p3OvhMsgFramerGlobals */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G992p3OvhMsg.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G992p3OvhMsg.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G992p3OvhMsg.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G992p3OvhMsg.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,64 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * G992p3OvhMsg.h -+ * -+ * Description: -+ * This file contains the exported functions and definitions for G992p3 -+ * overhead channel messages -+ * -+ * -+ * Copyright (c) 1999-2003 BroadCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.1 $ -+ * -+ * $Id: G992p3OvhMsg.h,v 1.1 2003/07/18 19:39:18 ilyas Exp $ -+ * -+ * $Log: G992p3OvhMsg.h,v $ -+ * Revision 1.1 2003/07/18 19:39:18 ilyas -+ * Initial G.992.3 overhead channel message implementation (from ADSL driver) -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef G992p3OvhMsgFramerHeader -+#define G992p3OvhMsgFramerHeader -+ -+#define kG992p3OvhMsgFrameBufCnt -1 -+ -+extern Boolean G992p3OvhMsgInit( -+ void *gDslVars, -+ bitMap setup, -+ dslFrameHandlerType rxReturnFramePtr, -+ dslFrameHandlerType txSendFramePtr, -+ dslCommandHandlerType commandHandler, -+ dslStatusHandlerType statusHandler); -+ -+extern void G992p3OvhMsgReset(void *gDslVars); -+extern void G992p3OvhMsgClose(void *gDslVars); -+extern void G992p3OvhMsgTimer(void *gDslVars, long timeQ24ms); -+extern Boolean G992p3OvhMsgCommandHandler (void *gDslVars, dslCommandStruct *cmd); -+extern void G992p3OvhMsgStatusSnooper (void *gDslVars, dslStatusStruct *status); -+ -+extern int G992p3OvhMsgSendCompleteFrame(void *gDslVars, void *pVc, ulong mid, dslFrame *pFrame); -+extern int G992p3OvhMsgIndicateRcvFrame(void *gDslVars, void *pVc, ulong mid, dslFrame *pFrame); -+ -+extern void G992p3OvhMsgSetL3(void *gDslVars); -+extern void G992p3OvhMsgSetL0(void *gDslVars); -+ -+#endif /* G992p3OvhMsgFramerHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G997.gh linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G997.gh ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G997.gh 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G997.gh 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,66 @@ -+/**************************************************************************** -+ * -+ * G997.gh -+ * -+ * Description: -+ * This is a header file which defines the type for the G997 Framer -+ * global variable structure. -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.5 $ -+ * -+ * $Id: G997.gh,v 1.5 2004/07/21 01:39:41 ilyas Exp $ -+ * -+ * $Log: G997.gh,v $ -+ * Revision 1.5 2004/07/21 01:39:41 ilyas -+ * Reset entire G.997 state on retrain. Timeout in G.997 if no ACK -+ * -+ * Revision 1.4 2004/04/27 00:27:16 ilyas -+ * Implemented double buffering to ensure G.997 HDLC frame is continuous -+ * -+ * Revision 1.3 2003/07/18 18:56:59 ilyas -+ * Added support for shared TX buffer (for ADSL driver) -+ * -+ * Revision 1.2 2002/01/11 06:48:27 ilyas -+ * Added command handler pointer -+ * -+ * Revision 1.1 2001/12/13 02:28:27 ilyas -+ * Added common framer (DslPacket and G997) and G997 module -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef G997FramerGlobals -+#define G997FramerGlobals -+ -+#include "DslFramer.h" -+#include "HdlcFramer.h" -+ -+#define kG997MsgBufSize 64 -+ -+typedef struct -+ { -+ bitMap setup; -+ dslFramerControl dslFramer; -+ hdlcByteControl hdlcByte; -+ dslCommandHandlerType commandHandler; -+ -+ ulong timeMs; -+ ulong timeCmdOut; -+ -+ uchar rxMsgNum; -+ uchar txMsgNum; -+ Boolean txIdle; -+ uchar txMsgBuf[kG997MsgBufSize]; -+ ulong txMsgBufLen; -+ uchar *txMsgBufPtr; -+ ulong txMsgLen; -+ ulong txMsgBufs; -+ ulong txMsgBufNum; -+ } -+ g997VarsStruct; -+ -+#endif /* G997FramerGlobals */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G997.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G997.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G997.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G997.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,68 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * G997.h -+ * -+ * Description: -+ * This file contains the exported functions and definitions for G97Framer -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.3 $ -+ * -+ * $Id: G997.h,v 1.3 2003/07/18 18:56:59 ilyas Exp $ -+ * -+ * $Log: G997.h,v $ -+ * Revision 1.3 2003/07/18 18:56:59 ilyas -+ * Added support for shared TX buffer (for ADSL driver) -+ * -+ * Revision 1.2 2002/07/20 00:51:41 ilyas -+ * Merged witchanges made for VxWorks/Linux driver. -+ * -+ * Revision 1.1 2001/12/13 02:28:27 ilyas -+ * Added common framer (DslPacket and G997) and G997 module -+ * -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef G997FramerHeader -+#define G997FramerHeader -+ -+extern Boolean G997Init( -+ void *gDslVars, -+ bitMap setup, -+ ulong rxBufNum, -+ ulong rxBufSize, -+ ulong rxPacketNum, -+ upperLayerFunctions *pUpperLayerFunctions, -+ dslCommandHandlerType g997PhyCommandHandler); -+ -+extern void G997Close(void *gDslVars); -+extern void G997Timer(void *gDslVars, long timeQ24ms); -+extern Boolean G997CommandHandler (void *gDslVars, dslCommandStruct *cmd); -+extern void G997StatusSnooper (void *gDslVars, dslStatusStruct *status); -+ -+extern int G997SendFrame(void *gDslVars, void *pVc, ulong mid, dslFrame *pFrame); -+extern int G997ReturnFrame(void *gDslVars, void *pVc, ulong mid, dslFrame *pFrame); -+ -+extern Boolean G997SetTxBuffer(void *gDslVars, ulong len, void *bufPtr); -+extern void * G997GetFramePoolHandler(void *gDslVars); -+ -+#endif /* G997FramerHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/HdlcFramer.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/HdlcFramer.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/HdlcFramer.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/HdlcFramer.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,237 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * HdlcFramer.h -+ * -+ * Description: -+ * This file contains common HDLC definitions for bit/byte stuffing -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.3 $ -+ * -+ * $Id: HdlcFramer.h,v 1.3 2004/07/21 01:39:41 ilyas Exp $ -+ * -+ * $Log: HdlcFramer.h,v $ -+ * Revision 1.3 2004/07/21 01:39:41 ilyas -+ * Reset entire G.997 state on retrain. Timeout in G.997 if no ACK -+ * -+ * Revision 1.2 2003/07/18 18:51:05 ilyas -+ * Added mode (default) to pass address and control field -+ * -+ * Revision 1.1 2001/12/13 02:28:27 ilyas -+ * Added common framer (DslPacket and G997) and G997 module -+ * -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef HdlcFramerHeader -+#define HdlcFramerHeader -+ -+/* setup bitmap definitions */ -+ -+#define kHdlcSetupShift 16 -+#define kHdlcSetupMask ((long)0xFFFF << kHdlcSetupShift) -+ -+#define kHdlcCrcMask 0x00030000 -+#define kHdlcCrcNone 0x00000000 -+#define kHdlcCrc16 0x00010000 -+#define kHdlcCrc32 0x00020000 -+ -+#define kHdlcTxIdleStop 0x00040000 -+#define kHdlcSpecialAddrCtrl 0x00080000 -+ -+extern ushort HdlcCrc16Table[]; -+ -+#define HDLC16_CRC_INIT 0xFFFF -+#define HDLC16_CRC_FINAL(crc) ((crc) ^ 0xFFFF) -+#define HDLC16_GOOD_CRC 0xF0B8 -+#define Hdlc16UpdateCrc(crc,b) ((crc) >> 8) ^ HdlcCrc16Table[((crc) ^ (b)) & 0xFF] -+ -+extern ulong HdlcCrc32Table[]; -+ -+#define HDLC32_CRC_INIT 0xFFFFFFFF -+#define HDLC32_CRC_FINAL(crc) ((crc) ^ 0xFFFFFFFF) -+#define HDLC32_GOOD_CRC 0xDEBB20E3 -+#define Hdlc32UpdateCrc(crc,b) ((crc) >> 8) ^ HdlcCrc32Table[((crc) ^ (b)) & 0xFF] -+ -+extern ulong HdlcCrc32Table[]; -+ -+/* HDLC common fields */ -+ -+#define HDLC_ADDR 0xFF -+#define HDLC_CTRL 0x3 -+ -+#define HDLC_BYTE_FLAG 0x7E -+#define HDLC_BYTE_ESC 0x7D -+ -+/* HDLC frame assembly states */ -+ -+#define HDLC_STATE_START_FLAG 0 -+#define HDLC_STATE_ADDRESS (HDLC_STATE_START_FLAG + 1) -+#define HDLC_STATE_CONTROL (HDLC_STATE_START_FLAG + 2) -+#define HDLC_STATE_DATA (HDLC_STATE_START_FLAG + 3) -+#define HDLC_STATE_FCS1 (HDLC_STATE_START_FLAG + 4) -+#define HDLC_STATE_FCS2 (HDLC_STATE_START_FLAG + 5) -+#define HDLC_STATE_END_FLAG (HDLC_STATE_START_FLAG + 6) -+ -+ -+/* HDLC common types */ -+ -+typedef struct _hdlcByteControl { -+ bitMap setup; -+ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler; -+ dslFramerDataDoneHandlerType rxDataDoneHandler; -+ dslFramerDataGetPtrHandlerType txDataGetPtrHandler; -+ dslFramerDataDoneHandlerType txDataDoneHandler; -+ -+ /* RX working data set */ -+ -+ uchar rxFrameState; -+ int rxFrameLen; -+ ulong rxCrc; -+ Boolean rxEscChar; -+ -+ uchar *pRxData; -+ uchar *pRxDataEnd; -+ long rxDataLen; -+ -+ /* TX working data set */ -+ -+ uchar txFrameState; -+ int txFrameLen; -+ ulong txCrc; -+ int txCharPending; -+ -+ uchar *pTxData; -+ uchar *pTxDataEnd; -+ long txDataLen; -+} hdlcByteControl; -+ -+typedef struct _hdlcBitControl { -+ bitMap setup; -+ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler; -+ dslFramerDataDoneHandlerType rxDataDoneHandler; -+ dslFramerDataGetPtrHandlerType txDataGetPtrHandler; -+ dslFramerDataDoneHandlerType txDataDoneHandler; -+ -+ /* RX working data set */ -+ -+ uchar rxFrameState; -+ int rxFrameLen; -+ ulong rxCrc; -+ int rxNibblePending; -+ int rxOutVal; -+ uchar rxOutBits; -+ uchar rxRem1Bits; -+ Boolean rxEscChar; /* ???? */ -+ -+ uchar *pRxData; -+ uchar *pRxDataEnd; -+ long rxDataLen; -+ -+ /* TX working data set */ -+ -+ uchar txFrameState; -+ int txFrameLen; -+ ulong txCrc; -+ int txOutVal; -+ uchar txOutBits; -+ uchar txLast1Bits; -+ int txCharPending; /* ???? */ -+ -+ uchar *pTxData; -+ uchar *pTxDataEnd; -+ long txDataLen; -+} hdlcBitControl; -+ -+/* HDLC common functions */ -+ -+#define HdlcFramerTxFrameInit(ctrl) do { \ -+ ctrl->txFrameState = HDLC_STATE_START_FLAG; \ -+ ctrl->txFrameLen = 0; \ -+ ctrl->txCrc = HDLC16_CRC_INIT; \ -+ ctrl->txCharPending= -1; \ -+} while (0) -+ -+#define HdlcFramerRxFrameInit(ctrl) do { \ -+ ctrl->rxFrameState = HDLC_STATE_START_FLAG; \ -+ ctrl->rxFrameLen = 0; \ -+ ctrl->rxCrc = HDLC16_CRC_INIT; \ -+ ctrl->rxEscChar = false; \ -+} while (0) -+ -+#define HdlcFramerTxGetData(ctrl) do { \ -+ dslFramerBufDesc bufDesc; \ -+ \ -+ if ((ctrl->txDataGetPtrHandler) (gDslVars, &bufDesc)) { \ -+ ctrl->pTxData = bufDesc.bufPtr; \ -+ ctrl->pTxDataEnd = (uchar*)bufDesc.bufPtr + bufDesc.bufLen; \ -+ ctrl->txDataLen = bufDesc.bufLen; \ -+ if (bufDesc.bufFlags & kDslFramerStartNewFrame) \ -+ HdlcFramerTxFrameInit(ctrl); \ -+ } \ -+ else { \ -+ HdlcFramerTxFrameInit(ctrl); \ -+ } \ -+} while (0); -+ -+#define HdlcFramerRxGetData(ctrl, frFlag) do { \ -+ dslFramerBufDesc bufDesc; \ -+ \ -+ bufDesc.bufFlags = frFlag; \ -+ if ((ctrl->rxDataGetPtrHandler) (gDslVars, &bufDesc)) { \ -+ ctrl->pRxData = bufDesc.bufPtr; \ -+ ctrl->pRxDataEnd = (uchar*)bufDesc.bufPtr + bufDesc.bufLen; \ -+ ctrl->rxDataLen = bufDesc.bufLen; \ -+ } \ -+} while (0); -+ -+/* HDLC functions headers */ -+ -+extern Boolean HdlcByteInit( -+ void *gDslVars, -+ hdlcByteControl *hbyCtrl, -+ bitMap setup, -+ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler, -+ dslFramerDataDoneHandlerType rxDataDoneHandler, -+ dslFramerDataGetPtrHandlerType txDataGetPtrHandler, -+ dslFramerDataDoneHandlerType txDataDoneHandler); -+ -+extern void HdlcByteReset(void *gDslVars, hdlcByteControl *hbyCtrl); -+extern void HdlcByteRxFlush(void *gDslVars, hdlcByteControl *hbyCtrl); -+extern int HdlcByteRx(void *gDslVars, hdlcByteControl *hbyCtrl, int nBytes, uchar *srcPtr) FAST_TEXT; -+extern int HdlcByteTx(void *gDslVars, hdlcByteControl *hbyCtrl, int nBytes, uchar *dstPtr) FAST_TEXT; -+extern Boolean HdlcByteTxIdle(void *gDslVars, hdlcByteControl *hbyCtrl); -+ -+extern Boolean HdlcBitInit( -+ void *gDslVars, -+ hdlcBitControl *hbiCtrl, -+ bitMap setup, -+ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler, -+ dslFramerDataDoneHandlerType rxDataDoneHandler, -+ dslFramerDataGetPtrHandlerType txDataGetPtrHandler, -+ dslFramerDataDoneHandlerType txDataDoneHandler); -+ -+extern void HdlcBitReset(void *gDslVars, hdlcByteControl *hbiCtrl); -+extern int HdlcBitRx(void *gDslVars, hdlcBitControl *hbiCtrl, int nBytes, uchar *srcPtr) FAST_TEXT; -+extern int HdlcBitTx(void *gDslVars, hdlcBitControl *hbiCtrl, int nBytes, uchar *dstPtr) FAST_TEXT; -+ -+#endif /* HdlcFramerHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MathUtil.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MathUtil.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MathUtil.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MathUtil.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,135 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/************************************************************************ -+ * -+ * MathUtil.h: -+ * -+ * Description: -+ * This file contains the exported interface for MathUtil.c module. -+ * -+ * -+ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved. -+ * Authors: Mark Gonikberg, Haixiang Liang. -+ * -+ * $Revision: 1.6 $ -+ * -+ * $Id: MathUtil.h,v 1.6 2004/04/13 00:21:13 ilyas Exp $ -+ * -+ * $Log: MathUtil.h,v $ -+ * Revision 1.6 2004/04/13 00:21:13 ilyas -+ * Added standard header for shared ADSL driver files -+ * -+ * Revision 1.5 2001/08/16 02:18:08 khp -+ * - mark functions with FAST_TEXT to reduce cycle counts for QPROC targets -+ * (replaces use of LMEM_INSN) -+ * -+ * Revision 1.4 1999/10/06 04:55:22 liang -+ * Added function to multiply two long values to save result as VeryLong. -+ * -+ * Revision 1.3 1999/08/05 19:42:52 liang -+ * Merged with the softmodem top of the tree on 08/04/99 for assembly files. -+ * -+ * Revision 1.2 1999/03/26 03:29:59 liang -+ * Export CosSin table. -+ * -+ * Revision 1.1 1998/10/28 01:28:07 liang -+ * *** empty log message *** -+ * -+ * Revision 1.12 1998/02/10 17:19:49 scott -+ * Changed MathVL routines to return arguments using pointers -+ * -+ * Revision 1.11 1997/12/13 06:12:07 mwg -+ * Added more Atan2 flavors -+ * -+ * Revision 1.10 1997/11/18 01:11:48 mwg -+ * Removed symbols which accidently slipped in. -+ * -+ * Revision 1.9 1997/11/03 19:07:52 scott -+ * No longer redefine max() and min() if already defined -+ * -+ * Revision 1.8 1997/07/30 01:35:20 liang -+ * Add more accurate atan2 function UtilLongLongAtan2. -+ * -+ * Revision 1.7 1997/07/21 20:23:19 mwg -+ * Added new function: UtilBlockCos() -+ * -+ * Revision 1.6 1997/03/21 23:50:10 liang -+ * Added initial version of V8bis module to CVS tree. -+ * -+ * Revision 1.5 1997/03/19 18:35:34 mwg -+ * Changed copyright notice. -+ * -+ * Revision 1.4 1997/01/21 00:36:15 mwg -+ * Added new function: UtilBlockCosSin() -+ * -+ * Revision 1.3 1996/06/18 21:14:45 mwg -+ * Modified VLDivVL by allowing to specify the result scaling. -+ * -+ * Revision 1.2 1996/06/12 02:31:59 mwg -+ * Added 64bit arithmetic functions. -+ * -+ * Revision 1.1.1.1 1996/02/14 02:35:15 mwg -+ * Redesigned the project directory structure. Merged V.34 into the project. -+ * -+ * Revision 1.4 1995/12/04 23:08:15 liang -+ * Add file Math/LinearToLog.c. -+ * -+ ************************************************************************/ -+#ifndef MathUtilPh -+#define MathUtilPh -+ -+/* Exported tables */ -+extern const short UtilCosTable[]; -+ -+/* Exported functions */ -+extern ComplexShort UtilCosSin(ushort angle); -+extern long UtilBlockCosSin (int nValues, long angle, long delta, ComplexShort *dstPtr); -+extern long UtilBlockCos (int nValues, long angle, long delta, short *dstPtr); -+extern ushort UtilShortShortAtan2(ComplexShort point); -+extern ushort UtilLongShortAtan2(ComplexLong point); -+extern ulong UtilShortLongAtan2(ComplexShort point) FAST_TEXT; -+extern ulong UtilLongLongAtan2(ComplexLong point) FAST_TEXT; -+extern ushort UtilSqrt(ulong y); -+extern ushort UtilMaxMagnitude(int blkSize, ComplexShort *dataPtr); -+extern short UtilQ0LinearToQ4dB (ulong x); -+extern ulong UtilQ4dBToQ12Linear (short x); -+extern void UtilAdjustComplexMagnitude(ComplexShort *srcPtr, short mag, short adjustment); -+ -+extern void VLMultLongByLong(long x, long y, VeryLong *dst); -+extern void VLMultShort (VeryLong x, short y, VeryLong *dst); -+extern void VLAddVL (VeryLong x, VeryLong y, VeryLong *dst); -+extern void VLAddLong (VeryLong x, long y, VeryLong *dst); -+extern void VLSubVL (VeryLong x, VeryLong y, VeryLong *dst); -+extern void VLSubLong (VeryLong x, long y, VeryLong *dst); -+extern void VLDivVL (VeryLong x, VeryLong y, int scale, long *dst); -+extern void VLShiftLeft(VeryLong x, int shift, VeryLong *dst); -+extern void VLShiftRight(VeryLong x, int shift, VeryLong *dst); -+ -+ -+#define UtilAtan2 UtilShortShortAtan2 -+#define UtilLongAtan2 UtilLongShortAtan2 -+ -+/* Standard Macros */ -+#undef abs -+#define abs(x) ((x) >= 0 ? (x) : -(x)) -+ -+#undef max -+#define max(x, y) ((x) >= (y) ? (x) : (y)) -+ -+#undef min -+#define min(x, y) ((x) <= (y) ? (x) : (y)) -+ -+#endif /* MathUtilPh */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MipsAsm.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MipsAsm.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MipsAsm.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MipsAsm.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,264 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/************************************************************************ -+ * -+ * MipsAsm.h: -+ * -+ * Description: -+ * This file contains definitions specific to MIPS assembly -+ * -+ * -+ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved. -+ * Authors: Mark Gonikberg, Haixiang Liang. -+ * -+ * $Revision: 1.5 $ -+ * -+ * $Id: MipsAsm.h,v 1.5 2004/04/13 00:16:59 ilyas Exp $ -+ * -+ * $Log: MipsAsm.h,v $ -+ * Revision 1.5 2004/04/13 00:16:59 ilyas -+ * Merged the latest ADSL driver changes -+ * -+ * Revision 1.4 2002/09/12 04:08:50 ilyas -+ * Added macros for BCM MIPS specific instructions -+ * -+ * Revision 1.3 2000/11/18 21:28:19 mprahlad -+ * ifdef bcm47xx - -+ * define MSUB(src1,src2) msub src1, src2 -+ * change Mult(dst, src1, src2) to use "mul" instead of "mult; mflo" -+ * define Mul(src1, src2) mult src1, src2 -+ * -+ * Revision 1.2 2000/07/28 21:05:05 mprahlad -+ * Macros specific to bcm47xx added. -+ * -+ * Revision 1.1 1999/08/05 19:52:57 liang -+ * Copied from the softmodem top of the tree on 08/04/99. -+ * -+ * Revision 1.5 1999/04/02 23:16:21 mwg -+ * Fixed a minor comatibility issue with mult -+ * -+ * Revision 1.4 1999/02/03 20:25:43 mwg -+ * Added an option for R4010 -+ * -+ * Revision 1.3 1998/10/30 02:21:34 mwg -+ * Added targets for 4640 -+ * -+ * Revision 1.2 1998/10/16 18:52:09 ilyas -+ * Added ASM_PROLOG[5-7] macros to save on stores -+ * -+ * Revision 1.1 1998/06/03 23:28:39 mwg -+ * Renamed from DinoDefs.h -+ * -+ * Revision 1.6 1998/02/09 18:23:11 scott -+ * Added EMBEDDED_CALLING_CONVENTION (GreenHill) and R3900/R4102 -+ * -+ * Revision 1.5 1997/03/19 18:35:02 mwg -+ * Changed copyright notice. -+ * -+ * Revision 1.4 1996/10/02 20:28:41 liang -+ * Remove parameter "acc" from the non-DINO version of MAD. -+ * -+ * Revision 1.3 1996/10/02 19:44:36 liang -+ * Separated MultAdd into MAD and MADW, added NO_DINO_WRITEBACK option. -+ * -+ * Revision 1.2 1996/08/14 03:06:07 liang -+ * Modified macro MultAdd so that the assembly code build works. -+ * -+ * Revision 1.1.1.1 1996/02/14 02:35:13 mwg -+ * Redesigned the project directory structure. Merged V.34 into the project. -+ * -+ * Revision 1.5 1994/11/04 22:41:29 mwg -+ * Added #ifdefs for different targets. -+ * -+ ************************************************************************/ -+ -+#ifndef _MIPS_ASM_H_ -+#define _MIPS_ASM_H_ -+ -+#define zero $0 -+#define v0 $2 -+#define v1 $3 -+#define a0 $4 -+#define a1 $5 -+#define a2 $6 -+#define a3 $7 -+#define t0 $8 -+#define t1 $9 -+#define t2 $10 -+#define t3 $11 -+#define t4 $12 -+#define t5 $13 -+#define t6 $14 -+#define t7 $15 -+#define s0 $16 -+#define s1 $17 -+#define s2 $18 -+#define s3 $19 -+#define s4 $20 -+#define s5 $21 -+#define s6 $22 -+#define s7 $23 -+#define t8 $24 -+#define t9 $25 -+#define k0 $26 -+#define k1 $27 -+#define gp $28 -+#define sp $29 -+#define fp $30 -+#define s8 $30 -+#define ra $31 -+ -+#ifdef EMBEDDED_CALLING_CONVENTION -+ -+/* Support for GreenHills embedded calling convention */ -+ -+#define ASM_PROLOG subu sp, 32; \ -+ sw $8, 16(sp); \ -+ sw $9, 20(sp); \ -+ sw $10, 24(sp); \ -+ sw $11, 28(sp); -+ -+#define ASM_PROLOG5 subu sp, 32; \ -+ sw $8, 16(sp); -+ -+#define ASM_PROLOG6 subu sp, 32; \ -+ sw $8, 16(sp); \ -+ sw $9, 20(sp); -+ -+#define ASM_PROLOG7 subu sp, 32; \ -+ sw $8, 16(sp); \ -+ sw $9, 20(sp); \ -+ sw $10, 24(sp); -+ -+#define ASM_EPILOG addu sp, 32 -+ -+#else -+#define ASM_PROLOG -+#define ASM_PROLOG5 -+#define ASM_PROLOG6 -+#define ASM_PROLOG7 -+#define ASM_EPILOG -+#endif -+ -+#ifdef DINO /* Special DSP extensions to MIPS core */ -+ -+#ifndef NO_DINO_WRITEBACK /* DSP extensions with writeback register */ -+ -+#define MAD(src1, src2) .set noreorder ; mad $0, src1, src2 ; .set reorder -+#define MADW(acc, src1, src2) .set noreorder ; mad acc, src1, src2 ; .set reorder -+#define Mult(dst, src1, src2) .set noreorder ; mult dst, src1, src2 ; .set reorder -+#define MultU(dst, src1, src2) .set noreorder ; multu dst, src1, src2 ; .set reorder -+ -+#else /* NO_DINO_WRITEBACK */ -+ -+#define MAD(src1, src2) .set noreorder ; mad $0, src1, src2 ; .set reorder -+#define MADW(acc, src1, src2) .set noreorder ; mad $0, src1, src2 ; mflo acc ; .set reorder -+#define Mult(dst, src1, src2) multu src1, src2 ; mflo dst -+#define MultU(dst, src1, src2) multu src1, src2 ; mflo dst -+ -+#endif /* NO_DINO_WRITEBACK */ -+ -+#else /* DINO */ -+ -+#if defined(R3900) -+ -+#define MAD(src1, src2) madd $0, src1, src2 -+#define MADW(acc, src1, src2) madd acc, src1, src2 -+#define Mult(dst, src1, src2) mult dst, src1, src2 -+#define MultU(dst, src1, src2) multu dst, src1, src2 -+ -+#elif defined(bcm47xx_INSTR_MACROS) && defined(bcm47xx) -+ -+#define mips_froo(s1,s2,s3) s1##s2##s3 -+#define MSUB(s1,s2) .set noreorder ; mips_froo(msub_,s1,s2) ; .set reorder -+#define MAD(s1,s2) .set noreorder ; mips_froo(mad_,s1,s2) ; .set reorder -+#define MADW(acc, s1,s2) .set noreorder ; mips_froo(mad_,s1,s2) ; mflo acc ; .set reorder -+ -+#include "BCM4710.h" -+ -+#define Mult(dst, src1, src2) mul dst, src1, src2 -+#define Mul( src1, src2) mult src1, src2 ; -+#define MultU(dst, src1, src2) multu src1, src2 ; mflo dst -+ -+#elif defined(bcm47xx) -+#define MSUB(src1, src2) msub src1, src2 -+#define MAD(src1, src2) madd src1, src2 -+#define MADW(acc, src1, src2) .set noreorder ; madd src1, src2; mflo acc ; .set reorder -+/* -+#define Mult(dst, src1, src2) mult src1, src2 ; mflo dst -+*/ -+#define Mult(dst, src1, src2) mul dst , src1, src2 ; -+#define Mul( src1, src2) mult src1, src2 ; -+#define MultU(dst, src1, src2) multu src1, src2 ; mflo dst -+ -+#else -+ -+#ifdef R4102 -+#define MAD(src1, src2) madd16 src1, src2 -+#define MADW(acc, src1, src2) madd16 src1, src2 ; mflo acc -+#else /* R4102 */ -+ -+#ifdef R4640 -+ -+#define MAD(src1, src2) madd $0, src1, src2 -+#define MADW(acc, src1, src2) madd src1, src2; mflo acc -+ -+#else /* R4640 */ -+ -+#ifdef R4010 -+ -+#define MAD(src1, src2) madd src1, src2 -+#define MADW(acc, src1, src2) madd src1, src2; mflo acc -+ -+#else -+#define MAD(src1, src2) .set noat ;\ -+ mflo $at ;\ -+ sw $2, -4(sp) ;\ -+ multu src1, src2 ;\ -+ mflo $2 ;\ -+ addu $at, $2, $at ;\ -+ lw $2, -4(sp) ;\ -+ mtlo $at ;\ -+ .set at -+ -+#define MADW(acc, src1, src2) .set noat ;\ -+ mflo $at ;\ -+ sw $2, -4(sp) ;\ -+ multu src1, src2 ;\ -+ mflo $2 ;\ -+ addu $at, $2, $at ;\ -+ lw $2, -4(sp) ;\ -+ move acc, $at ;\ -+ mtlo $at ;\ -+ .set at -+#endif /* R4010 */ -+#endif /* R4102 */ -+#endif /* R4640 */ -+ -+#define Mult(dst, src1, src2) mul dst, src1, src2 -+#define MultU(dst, src1, src2) multu src1, src2 ; mflo dst -+ -+#endif /* !3900 */ -+#endif /* DINO */ -+ -+ -+ -+ -+ -+ -+ -+ -+#endif /* _MIPS_ASM_H_ */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MiscUtil.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MiscUtil.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MiscUtil.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MiscUtil.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,65 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * MiscUtil.h -- Miscellaneous utilities -+ * -+ * Description: -+ * -+ * -+ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved. -+ * Authors: Mark Gonikberg Haixiang Liang -+ * -+ * $Revision: 1.4 $ -+ * -+ * $Id: MiscUtil.h,v 1.4 2004/04/13 00:21:46 ilyas Exp $ -+ * -+ * $Log: MiscUtil.h,v $ -+ * Revision 1.4 2004/04/13 00:21:46 ilyas -+ * Added standard header for shared ADSL driver files -+ * -+ * Revision 1.3 2001/07/21 01:21:06 ilyas -+ * Added more functions for int to string conversion used by log file -+ * -+ * Revision 1.2 1999/08/05 19:42:56 liang -+ * Merged with the softmodem top of the tree on 08/04/99 for assembly files. -+ * -+ * Revision 1.1 1999/01/27 22:10:12 liang -+ * Initial version. -+ * -+ * Revision 1.1 1997/07/10 01:18:45 mwg -+ * Initial revision. -+ * -+ * -+ * -+ *****************************************************************************/ -+#ifndef _MISC_UTIL_H_ -+#define _MISC_UTIL_H_ -+ -+extern long SM_DECL GetRateValue(dataRateMap rate); -+extern int SM_DECL DecToString(ulong value, uchar *dstPtr, uint nDigits); -+extern int SM_DECL HexToString(ulong value, uchar *dstPtr, uint nDigits); -+extern char * SM_DECL DecToStr(char *s, ulong num); -+extern char * SM_DECL SignedToStr(char *s, long num); -+extern char * SM_DECL HexToStr(char *s, ulong num); -+ -+#define EvenParityBit(x) ((z = (y = x ^ (x >> 4)) ^ (y >> 2)) ^ (z >> 1)) -+#define OddParityBit(x) (EvenParityBit(x) ^ 1) -+ -+extern void ParityApply(int nBytes, int nDataBits, int parity, uchar *srcPtr, uchar *dstPtr); -+extern void ParityStrip(int nBytes, int nDataBits, int parity, uchar *srcPtr, uchar *dstPtr, statusHandlerType statusHandler); -+ -+#endif -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/Que.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/Que.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/Que.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/Que.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,106 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * Que.h -+ * -+ * Description: -+ * Definition and implementation (via macros and inline functions) -+ * of a simple queue -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ *****************************************************************************/ -+ -+#ifndef QueHeader_H_ -+#define QueHeader_H_ -+ -+typedef void * _QueItem; -+ -+typedef struct _QueHeader -+ { -+ _QueItem *head; /* first item in the queue */ -+ _QueItem *tail; /* last item in the queue */ -+ } QueHeader; -+ -+/* Queue management macros */ -+ -+#define QueInit(pqHdr) (((QueHeader *)(pqHdr))->head = ((QueHeader *)(pqHdr))->tail = NULL) -+#define QueEmpty(pqHdr) (NULL == ((QueHeader *)(pqHdr))->head) -+ -+#define QueFirst(pqHdr) ((QueHeader *)(pqHdr))->head -+#define QueLast(pqHdr) ((QueHeader *)(pqHdr))->tail -+#define QueNext(pqItem) (*((void **)(pqItem))) -+ -+ -+#define QueRemoveFirst(pqHdr) do { \ -+ if (!QueEmpty(pqHdr)) { \ -+ ((QueHeader *)(pqHdr))->head = *((QueHeader *)(pqHdr))->head; \ -+ if (QueEmpty(pqHdr)) \ -+ ((QueHeader *)(pqHdr))->tail = NULL; \ -+ } \ -+} while (0) -+#define QueRemove(pqHdr) QueRemoveFirst(pqHdr) -+ -+ -+#define QueAddLast(pqHdr,pqItem) do { \ -+ QueNext(pqItem) = NULL; \ -+ if (NULL != ((QueHeader *)(pqHdr))->tail) \ -+ *((QueHeader *)(pqHdr))->tail = (pqItem); \ -+ else \ -+ ((QueHeader *)(pqHdr))->head = (_QueItem *)(pqItem); \ -+ ((QueHeader *)(pqHdr))->tail = (_QueItem *)(pqItem); \ -+} while (0) -+#define QueAdd(pqHdr,pItem) QueAddLast(pqHdr,pItem) -+ -+#define QueAddFirst(pqHdr,pqItem) do { \ -+ if (NULL == ((QueHeader *)(pqHdr))->tail) \ -+ ((QueHeader *)(pqHdr))->tail = (_QueItem *)(pqItem); \ -+ QueNext(pqItem) = ((QueHeader *)(pqHdr))->head; \ -+ ((QueHeader *)(pqHdr))->head = (_QueItem *)(pqItem); \ -+} while (0) -+ -+ -+#define QueGet(pqHdr) \ -+ (void *) QueFirst(pqHdr); \ -+ QueRemove(pqHdr); -+ -+#define QueMerge(pqHdr1,pqHdr2) do { \ -+ if (NULL == ((QueHeader *)(pqHdr1))->tail) \ -+ ((QueHeader *)(pqHdr1))->head = ((QueHeader *)(pqHdr2))->head; \ -+ else \ -+ QueNext(((QueHeader *)(pqHdr1))->tail) = ((QueHeader *)(pqHdr2))->head; \ -+ if (NULL != ((QueHeader *)(pqHdr2))->tail) \ -+ ((QueHeader *)(pqHdr1))->tail = ((QueHeader *)(pqHdr2))->tail; \ -+} while (0) -+ -+#define QueCopy(pqHdr1,pqHdr2) do { \ -+ ((QueHeader *)(pqHdr1))->head = ((QueHeader *)(pqHdr2))->head; \ -+ ((QueHeader *)(pqHdr1))->tail = ((QueHeader *)(pqHdr2))->tail; \ -+} while (0) -+ -+#define QueForEach(pqHdr,f,ref) do { \ -+ _QueItem *p = ((QueHeader *)(pqHdr))->head; \ -+ \ -+ while (NULL != p) { \ -+ if ( (f)((void *)p, ref) ) break; \ -+ p = QueNext(p); \ -+ } \ -+} while (0) -+ -+#endif /* QueHeader_H_ */ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftAtmVc.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftAtmVc.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftAtmVc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftAtmVc.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,569 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * SoftAtmVc.h -+ * -+ * Description: -+ * This file contains ATM VC definitions -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.27 $ -+ * -+ * $Id: SoftAtmVc.h,v 1.27 2004/06/02 22:26:17 ilyas Exp $ -+ * -+ * $Log: SoftAtmVc.h,v $ -+ * Revision 1.27 2004/06/02 22:26:17 ilyas -+ * Added ATM counters for G.992.3 -+ * -+ * Revision 1.26 2004/03/10 22:57:20 ilyas -+ * Added I.432 scramling control -+ * -+ * Revision 1.25 2003/09/23 00:21:59 ilyas -+ * Added status to indicate ATM header compression -+ * -+ * Revision 1.24 2003/08/27 02:00:50 ilyas -+ * Original implementation of ATM header compression -+ * -+ * Revision 1.23 2003/02/25 04:13:15 ilyas -+ * Added standard Broadcom header -+ * -+ * Revision 1.22 2003/01/10 23:25:48 ilyas -+ * Added ATM status definition -+ * -+ * Revision 1.21 2002/09/12 21:07:19 ilyas -+ * Added HEC, OCD and LCD counters -+ * -+ * Revision 1.20 2002/04/02 09:58:00 ilyas -+ * Initial implementatoin of BERT -+ * -+ * Revision 1.19 2001/10/09 22:35:14 ilyas -+ * Added more ATM statistics and OAM support -+ * -+ * Revision 1.18 2001/06/18 19:49:36 ilyas -+ * Changes to include support for HOST_ONLY mode -+ * -+ * Revision 1.17 2001/02/23 05:49:57 ilyas -+ * Added routed 1483 encapsulation -+ * -+ * Revision 1.16 2001/02/09 04:18:18 ilyas -+ * Added framer for bridged ethernet PDUs -+ * -+ * Revision 1.15 2001/02/09 01:55:27 ilyas -+ * Added status codes and macros to support printing of AAL packets -+ * -+ * Revision 1.14 2000/09/21 17:28:35 ilyas -+ * Added VBR support to traffic management code, separated UBR to a different -+ * Tx list, changed some of the algorithms -+ * -+ * Revision 1.13 2000/08/23 18:42:13 ilyas -+ * Added AAL2, added VcConfigure functions, moved commonly used look-up -+ * tables for CRC calculation to AtmLayer -+ * -+ * Revision 1.12 2000/08/02 03:06:22 ilyas -+ * Added support for reserving space in RX packets for ATm protocols -+ * -+ * Revision 1.11 2000/07/28 17:23:39 ilyas -+ * Added ATM connect/disconnect statuses -+ * -+ * Revision 1.10 2000/07/25 02:16:12 ilyas -+ * Added EClip (with Eth to ATM ARP translation) implementation -+ * -+ * Revision 1.9 2000/07/23 20:57:14 ilyas -+ * Added ATM framer and protocol layers -+ * -+ * Revision 1.8 2000/07/17 21:08:16 lkaplan -+ * removed global pointer -+ * -+ * Revision 1.7 2000/06/09 18:33:04 liang -+ * Fixed Irix compiler warnings. -+ * -+ * Revision 1.6 2000/05/18 21:47:31 ilyas -+ * Added detection of preassigned cells such as OAM F4, F5 -+ * -+ * Revision 1.5 2000/05/14 01:50:11 ilyas -+ * Added more statuses to ATM code -+ * -+ * Revision 1.4 2000/05/10 02:41:28 liang -+ * Added status report for no cell memory -+ * -+ * Revision 1.3 2000/05/09 23:00:27 ilyas -+ * Added ATM status messages, ATM timer, Tx frames flush on timeout -+ * Fixed a bug - adding flushed Tx frames to the list of free Rx frames -+ * -+ * Revision 1.2 2000/05/03 03:53:00 ilyas -+ * Added support for pVc to vcID translation needed for LOG file and other -+ * definitions for ATM data in LOG file -+ * -+ * Revision 1.1 2000/04/19 00:21:35 ilyas -+ * Fixed some problems and added Out Of Band (OOB) support to ATM packets -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef SoftAtmVcHeader -+#define SoftAtmVcHeader -+ -+/* -+** -+** ATM UNI types -+** -+*/ -+ -+#define AtmLinkFlags(bMap,name) (((bMap) >> name##Shift) & name##Mask) -+ -+/* ATM service category types */ -+ -+#define kAtmSrvcCBR 1 /* Constant Bit Rate */ -+#define kAtmSrvcVBR 2 /* Variable Bit Rate */ -+#define kAtmSrvcUBR 4 /* Unspecified Bit Rate */ -+#define kAtmSrvcABR 8 /* Available Bit Rate */ -+#define kAtmSrvcUnknown 0xFF -+ -+/* ATM AAL types (as encoded at UNI) */ -+ -+#define kAtmAalIE 0x58 -+ -+#define kAtmRaw 0 -+#define kAtmAal1 1 -+#define kAtmAal2 2 -+#define kAtmAal34 3 -+#define kAtmAal5 5 -+#define kAtmAalUser 16 -+#define kAtmAalUnknown 0xFF -+ -+/* ATM AAL1 parameters */ -+ -+#define kAal1SubTypeId 0x85 -+ -+#define kAal1TransportShift 0 -+#define kAal1TransportMask 0x7 -+ -+#define kAal1NullTransport 0 -+#define kAal1VoiceTransport 1 -+#define kAal1CircuitTransport 2 -+#define kAal1AudioTransport 4 -+#define kAal1VideoTransport 5 -+ -+ -+#define kAal1CBRId 0x86 -+ -+#define kAal1CBRShift 24 -+#define kAal1CBRMask 0xFF -+ -+#define kAal1CBR64 1 -+#define kAal1CBR1544 4 /* DS1 */ -+#define kAal1CBR6312 5 /* DS2 */ -+#define kAal1CBR32064 6 -+#define kAal1CBR44736 7 /* DS3 */ -+#define kAal1CBR97728 8 -+#define kAal1CBR2048 0x10 /* E1 */ -+#define kAal1CBR8448 0x11 /* E2 */ -+#define kAal1CBR34368 0x12 /* E3 */ -+#define kAal1CBR139264 0x13 -+#define kAal1CBR64xN 0x40 -+#define kAal1CBR8xN 0x41 -+ -+ -+#define kAal1MultiplierId 0x87 -+ -+#define kAal1ClockRecoveryId 0x88 -+ -+#define kAal1ClockRecoveryShift 3 -+#define kAal1ClockRecoveryMask 0x3 -+ -+#define kAal1ClockRecoveryNull 1 /* synchronous transport */ -+#define kAal1ClockRecoverySRTS 1 /* asynchronous transport */ -+#define kAal1ClockRecoveryAdaptive 2 -+ -+ -+#define kAal1ECMId 0x89 /* Error correction method */ -+ -+#define kAal1ECMShift (kAal1ClockRecoveryShift + 2) -+#define kAal1ECMMask 0x3 -+ -+#define kAal1ECMNull 0 -+#define kAal1ECMLossSensitive 1 -+#define kAal1ECMDelaySensitive 2 -+ -+ -+#define kAal1SDTBlockSizeId 0x8A -+ -+#define kAal1CellFillId 0x8B -+ -+/* ATM AAL34 and AAL5 parameters */ -+ -+#define kAalFwdMaxSDUSizeId 0x8C -+#define kAalBacMaxkSDUSizeId 0x81 -+ -+#define kAal34MidRangeId 0x82 -+ -+#define kAalSSCSTypeId 0x84 -+ -+#define kAalSSCSAssured 1 -+#define kAalSSCSNonAssured 2 -+#define kAalSSCSFrameRelay 4 -+ -+/* ATM AAL2 parameters */ -+ -+#define kAal2SSNone 0 -+#define kAal2SSSAR 1 -+#define kAal2SSTED 2 -+#define kAal2SSSARMask 3 -+#define kAal2SSType1 4 -+#define kAal2SSType3 5 -+ -+typedef struct { -+ uchar aalType; -+ union { -+ struct { -+ bitMap aal1Flags; -+ ulong cbrRate; -+ ushort blkSize; -+ uchar sarUsed; -+ } aal1Params; -+ struct { -+ ushort fwdMaxCpSize; /* Max "common part" packet size */ -+ ushort backMaxCpSize; -+ ushort cidLow; -+ ushort cidHigh; -+ ushort fwdMaxSsSize; /* Max "service specific" packet size */ -+ ushort backMaxSsSize; -+ uchar sscsType; -+ } aal2Params; -+ struct { -+ ushort fwdMaxSDUSize; -+ ushort backMaxSDUSize; -+ ushort midLow; -+ ushort midHigh; -+ uchar sscsType; -+ } aal34Params; -+ struct { -+ ushort fwdMaxSDUSize; -+ ushort backMaxSDUSize; -+ uchar sscsType; -+ } aal5Params; -+ } param; -+} atmAalParams; -+ -+/* ATM Traffic Descriptor types (as encoded at UNI) */ -+ -+#define kAtmTrafficIE 0x59 -+ -+#define kTrafficFwdPeakCellRateId0 0x82 -+#define kTrafficBackPeakCellRateId0 0x83 -+#define kTrafficFwdPeakCellRateId 0x84 -+#define kTrafficBackPeakCellRateId 0x85 -+ -+#define kTrafficFwdSustainCellRateId0 0x88 -+#define kTrafficBackSustainCellRateId0 0x89 -+#define kTrafficFwdSustainCellRateId 0x90 -+#define kTrafficBackSustainCellRateId 0x91 -+ -+#define kTrafficFwdMaxBurstSizeId0 0xA0 -+#define kTrafficBackMaxBurstSizeId0 0xA1 -+#define kTrafficFwdMaxBurstSizeId 0xB0 -+#define kTrafficBackMaxBurstSizeId 0xB1 -+ -+#define kTrafficBestEffortId 0xBE -+#define kTrafficMgrOptionsId 0xBF -+ -+#define kTrafficMaxTolerance 0x7FFFFFFF -+ -+/* trafficFlags coding */ -+ -+#define kTrafficTagFwd 1 -+#define kTrafficTagBack 2 -+#define kTrafficBestEffort 4 -+ -+typedef struct { -+ ulong tPCR0; /* CLP = 0, time between cells in us */ -+ ulong tPCR; /* CLP = 0+1 */ -+ ulong tolPCR; /* tolerance for PCR in us */ -+ -+ ulong tSCR0; /* CLP = 0 */ -+ ulong tSCR; /* CLP = 0+1 */ -+ ulong tolSCR; /* tolerance for SCR in us */ -+ -+ uchar atmServiceType; /* CBR, VBR, UBR, etc. */ -+ uchar trafficFlags; -+} atmTrafficParams; -+ -+/* ATM Broadband Bearer Capabilty (BBC) types (as encoded at UNI) */ -+ -+#define kAtmBBCIE 0x5E -+ -+#define kBBCClassShift 0 -+#define kBBCClassMask 0x1F -+ -+#define kBBCClassA 0x1 -+#define kBBCClassC 0x3 -+#define kBBCClassX 0x10 -+ -+ -+#define kBBCTrafficShift (kBBCClassShift + 5) -+#define kBBCTrafficMask 0x7 -+ -+#define kBBCTrafficNull 0 -+#define kBBCTrafficCBR 1 -+#define kBBCTrafficVBR 2 -+ -+ -+#define kBBCTimingShift (kBBCTrafficShift + 3) -+#define kBBCTimingMask 0x3 -+ -+#define kBBCTimingNull 0 -+#define kBBCTimingRequired 1 -+#define kBBCTimingNotRequired 2 -+ -+ -+#define kBBCClippingShift (kBBCTimingShift + 2) -+#define kBBCClippingMask 0x3 -+ -+#define kBBCNoClipping 0 -+#define kBBCClippingOk 1 -+ -+#define kBBCConnectionShift (kBBCClippingShift + 2) -+#define kBBCConnectionMask 0x3 -+ -+#define kBBCPoint2Point 0 -+#define kBBCPoint2MPoint 1 -+ -+/* ATM Broadband High/Low Layer Information (BHLI/BLLI) types (as encoded at UNI) */ -+ -+#define kAtmBHLIIE 0x5D -+#define kAtmBLLIIE 0x5F -+ -+/* ATM QoS types (as encoded at UNI) */ -+ -+#define kAtmQoSIE 0x5C -+ -+#define kQoSNull 0 -+#define kQoSClass1 1 -+#define kQoSClass2 2 -+#define kQoSClass3 3 -+#define kQoSClass4 4 -+#define kQoSReserved 0xFF -+ -+typedef struct { -+ uchar fwdQoSClass; -+ uchar backQoSClass; -+} atmQoSParams; -+ -+/* ATM MID definitions (ConfigureHandler) */ -+ -+#define kAtmMidEntireVc ((ulong) -1) -+ -+typedef struct { -+ void *pUserVc; /* VC id from the caller: has to be 1st !!! */ -+ ulong vci; -+ uchar defaultCLP; /* default CLP for tx packets on this VC */ -+ uchar framerId; -+ uchar protoId; -+ uchar protoRxBytesReserved; /* # bytes reserved by protocol in the beginning of Rx packet */ -+ uchar protoTxBytesReserved; /* # bytes reserved by protocol in the beginning of Tx packet */ -+ -+ atmAalParams aalParams; -+ atmTrafficParams rxTrafficParams; -+ atmTrafficParams txTrafficParams; -+ bitMap bbcFlags; -+ atmQoSParams qosParams; -+} atmVcParams; -+ -+/* -+** -+** ATM Out of Band (OOB) packet information -+** -+*/ -+ -+typedef struct { -+ Boolean clp; /* Cell Loss Prioroty */ -+ uchar aalType; -+ union { -+ struct { -+ uchar payloadType; -+ } aalRawParams; -+ struct { -+ uchar payloadType; -+ ushort mid; -+ } aal34Params; -+ struct { -+ uchar uui; /* Uses to user indicator */ -+ uchar cpi; /* common part indicator */ -+ } aal5Params; -+ } aalParam; -+} atmOobPacketInfo; -+ -+/* -+** -+** ATM setup bit definition -+** -+*/ -+ -+#define kAtmCorrectHecErrors 1 -+#define kCorrectHecErrors kAtmCorrectHecErrors -+#define kAtmPhyHeaderCompression 2 -+#define kAtmPhyNoDataScrambling 4 -+ -+#define kAtmTxIdleTimeoutMask 0x6 -+#define kAtmTxIdleNoTimeout 0 -+#define kAtmTxIdleTimeout10s 2 -+#define kAtmTxIdleTimeout30s 4 -+#define kAtmTxIdleTimeout60s 6 -+ -+/* -+** -+** ATM framer modes and protocol definitions -+** -+*/ -+ -+#define kAtmFramerNone 0 -+#define kAtmFramerISO 1 -+#define kAtmFramerIP 2 -+#define kAtmFramerEth 3 -+#define kAtmFramerEthWithCRC 4 -+ -+#define kAtmProtoNone 0 -+#define kAtmProtoEClip 1 -+#define kAtmProtoERouted1483 2 -+#define kAtmProtoPPP 3 -+ -+ -+/* -+** -+** ATM status codes -+** -+*/ -+ -+typedef void (*atmStatusHandler) (void *gDslVars, ulong statusCode, ...); -+ -+/* physical layer I.432 */ -+ -+#define kAtmStatRxHunt 1 -+#define kAtmStatRxPreSync 2 -+#define kAtmStatRxSync 3 -+#define kAtmStatRxPlOamCell 4 -+#define kAtmStatBertResult 5 -+#define kAtmStatHec 6 -+#define kAtmStatHdrCompr 7 -+#define kAtmStatCounters 8 -+ -+/* ATM layer */ -+ -+#define kAtmLayerStatFirst 100 -+#define kAtmStatRxDiscarded 100 -+#define kAtmStatTxDelayed 101 -+ -+#define kAtmStatVcCreated 102 -+#define kAtmStatVcStarted 103 -+#define kAtmStatVcStopped 104 -+#define kAtmStatVcDeleted 105 -+ -+#define kAtmStatTimeout 106 -+#define kAtmStatNoCellMemory 107 -+#define kAtmStatPrintCell 108 -+#define kAtmStatInvalidCell 109 -+#define kAtmStatUnassignedCell 110 -+#define kAtmStatOamF4SegmentCell 111 -+#define kAtmStatOamF4End2EndCell 112 -+#define kAtmStatOamI371Cell 113 -+#define kAtmStatOamF5SegmentCell 114 -+#define kAtmStatOamF5End2EndCell 115 -+#define kAtmStatReservedCell 116 -+ -+#define kAtmStatConnected 117 -+#define kAtmStatDisconnected 118 -+ -+#define kAtmStatRxPacket 119 -+#define kAtmStatTxPacket 120 -+ -+#define kAtmStatOamLoopback 121 -+ -+ -+typedef struct _atmPhyCounters { -+ ushort id; -+ ushort bertStatus; -+ ulong bertCellTotal; -+ ulong bertCellCnt; -+ ulong bertBitErrors; -+ -+ ulong rxHecCnt; -+ ulong rxCellTotal; -+ ulong rxCellData; -+ ulong rxCellDrop; -+} atmPhyCounters; -+ -+/* AAL layer */ -+ -+ -+ -+/* -+** -+** ATM log file definitions -+** -+*/ -+ -+/* ATM log file flags */ -+ -+#define kAtmLogFrameFlagMask 3 /* mask */ -+ -+#define kAtmLogFrameFlagNone 0 /* nothing */ -+#define kAtmLogFrameFlagNoData 1 /* no data only frame size */ -+#define kAtmLogFrameFlagBinData 2 /* data in binary form */ -+#define kAtmLogFrameFlagTextData 3 /* data in text form */ -+ -+#define kAtmLogSendFrameShift 0 -+#define kAtmLogSendFrameNoData (kAtmLogFrameFlagNoData << kAtmLogSendFrameShift) -+#define kAtmLogSendFrameBinData (kAtmLogFrameFlagBinData << kAtmLogSendFrameShift) -+#define kAtmLogSendFrameTextData (kAtmLogFrameFlagTextData << kAtmLogSendFrameShift) -+ -+#define kAtmLogRcvFrameShift 2 -+#define kAtmLogRcvFrameNone (kAtmLogFrameFlagNone << kAtmLogRcvFrameShift) -+#define kAtmLogRcvFrameNoData (kAtmLogFrameFlagNoData << kAtmLogRcvFrameShift) -+#define kAtmLogRcvFrameBinData (kAtmLogFrameFlagBinData << kAtmLogRcvFrameShift) -+#define kAtmLogRcvFrameTextData (kAtmLogFrameFlagTextData << kAtmLogRcvFrameShift) -+ -+#define kAtmLogSendCompleteFrameShift 4 -+#define kAtmLogSendCompleteFrameNone (kAtmLogFrameFlagNone << kAtmLogSendCompleteFrameShift) -+#define kAtmLogSendCompleteFrameNoData (kAtmLogFrameFlagNoData << kAtmLogSendCompleteFrameShift) -+ -+#define kAtmLogReturnFrameShift 6 -+#define kAtmLogReturnFrameNoData (kAtmLogFrameFlagNoData << kAtmLogReturnFrameShift) -+ -+#define kAtmLogCellFlag (1 << 8) -+ -+/* ATM log codes */ -+ -+#define kAtmLogSendFrame 1 -+#define kAtmLogRcvFrame 2 -+#define kAtmLogSendFrameComplete 3 -+#define kAtmLogReturnFrame 4 -+#define kAtmLogVcAllocate 5 -+#define kAtmLogVcFree 6 -+#define kAtmLogVcActivate 7 -+#define kAtmLogVcDeactivate 8 -+#define kAtmLogTimer 9 -+#define kAtmLogCell 10 -+#define kAtmLogVcConfigure 11 -+ -+#define kAtmLogRxCellHeader 12 -+#define kAtmLogRxCellData 13 -+#define kAtmLogTxCell 14 -+ -+#endif /* SoftAtmVcHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftDsl.gh linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftDsl.gh ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftDsl.gh 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftDsl.gh 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,675 @@ -+/**************************************************************************** -+ * -+ * SoftDsl.gh -+ * -+ * Description: -+ * This is a header file which defines the type for the DSL -+ * global variable structure. -+ * -+ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.72 $ -+ * -+ * $Id: SoftDsl.gh,v 1.72 2004/04/30 23:05:19 kdu Exp $ -+ * -+ * $Log: SoftDsl.gh,v $ -+ * Revision 1.72 2004/04/30 23:05:19 kdu -+ * Fixed interop issues in TDC lab for TMM. -+ * -+ * Revision 1.70 2004/04/10 23:30:48 ilyas -+ * Defined gloval structure for slow (SDRAM) data -+ * -+ * Revision 1.69 2004/04/02 18:33:45 gsyu -+ * Share MuxFramer buffers with scratch memory -+ * -+ * Revision 1.68 2004/02/04 20:12:38 linyin -+ * Support adsl2plus -+ * -+ * Revision 1.67 2004/02/03 19:10:37 gsyu -+ * Added separated carrierInfo structures for G992P5 -+ * -+ * Revision 1.66 2004/01/26 04:21:06 yongbing -+ * Merge changes in ADSL2 branch into Annex A branch -+ * -+ * Revision 1.65 2004/01/13 19:12:07 gsyu -+ * Added two more variables for Double upstream -+ * -+ * Revision 1.64 2003/12/04 02:10:37 linyin -+ * Add a variable for FbmsOL mode -+ * -+ * Revision 1.63 2003/11/20 00:57:50 yongbing -+ * Merge ADSL2 functionalities into Annex A branch -+ * -+ * Revision 1.62 2003/11/05 01:59:12 liang -+ * Add vendor ID code for Infineon. -+ * -+ * Revision 1.61 2003/08/12 22:59:41 khp -+ * - for Haixiang: added support for ADSL_MARGIN_TWEAK_TEST -+ * -+ * Revision 1.60 2003/08/01 00:08:19 liang -+ * Added firmware ID for Samsung ADI 930 DSLAM. -+ * -+ * Revision 1.59 2003/07/14 14:40:08 khp -+ * - AnnexB: added bad SNR2 retrain counter to connectin setup -+ * -+ * Revision 1.58 2003/06/25 02:40:22 liang -+ * Added firmware ID for Annex A UE9000 ADI918 (from Aliant, Canada). -+ * -+ * Revision 1.57 2003/06/25 00:00:40 ilyas -+ * -added firmware IDs for TI 4000C and AC5 (Annex B) -+ * -+ * Revision 1.56 2003/05/31 01:50:38 khp -+ * -add firmware IDs for ECI16 and ECI16A -+ * -+ * Revision 1.55 2003/03/27 19:30:52 liang -+ * Add and initialize new connectionSetup field coVendorFirmwareID under module ADSL_IDENTIFY_VENDOR_FIRMWARE. -+ * -+ * Revision 1.54 2002/12/13 18:35:48 yongbing -+ * Add support for G.992.2 Annex C in start up -+ * -+ * Revision 1.53 2002/12/06 02:06:33 liang -+ * Moved the T1.413 RAck1/RAck2 switching variables to connection setup structure. -+ * -+ * Revision 1.52 2002/11/26 02:49:46 liang -+ * Added variable codingGainDecrement to the connectionSetup structure to solve the C-Rates-RA option failure problem. -+ * -+ * Revision 1.51 2002/10/20 18:56:16 khp -+ * - for linyin: -+ * - #ifdef NEC_NSIF_WORKAROUND: -+ * - add status and fail counter for NSIF -+ * -+ * Revision 1.50 2002/09/28 02:36:50 yongbing -+ * Add retrain in T1.413 with R-Ack1 tone -+ * -+ * Revision 1.49 2002/09/12 21:07:19 ilyas -+ * Added HEC, OCD and LCD counters -+ * -+ * Revision 1.48 2002/07/19 01:51:35 liang -+ * Added vendor ID constant for Alcatel. -+ * -+ * Revision 1.47 2002/06/27 21:51:08 liang -+ * Added xmt and rcv tone selection bitmap in connection setup. -+ * -+ * Revision 1.46 2002/06/11 20:48:06 liang -+ * Added CO vendor ID field to connectionSetup structure. -+ * -+ * Revision 1.45 2002/06/06 03:05:43 khp -+ * -use boolean in connectup setup instead of localCapabilities.features to indicate FBM mode -+ * -+ * Revision 1.44 2002/03/22 19:38:58 yongbing -+ * Modify for co-exist of G994P1 and T1P413 -+ * -+ * Revision 1.43 2002/03/02 00:52:40 ilyas -+ * AnnexC delay needs to be long for prototype -+ * -+ * Revision 1.42 2002/01/19 23:59:17 ilyas -+ * Added support for LOG and eye data to ADSL core target -+ * -+ * Revision 1.41 2002/01/16 19:03:59 ilyas -+ * Added HOST_ONLY ifdefs around ADSL core data -+ * -+ * Revision 1.40 2002/01/14 17:41:04 liang -+ * Move xmt & rcv sample buffers to top level. -+ * -+ * Revision 1.39 2001/12/21 22:45:34 ilyas -+ * Added support for ADSL MIB data object -+ * -+ * Revision 1.38 2001/12/13 02:24:22 ilyas -+ * Added G997 (Clear EOC and G997 framer) support -+ * -+ * Revision 1.37 2001/11/30 05:56:31 liang -+ * Merged top of the branch AnnexBDevelopment onto top of the tree. -+ * -+ * Revision 1.36 2001/10/19 00:12:07 ilyas -+ * Added support for frame oriented (no ATM) data link layer -+ * -+ * Revision 1.29.2.5 2001/10/03 01:44:00 liang -+ * Merged with codes from main tree (tag SoftDsl_2_18). -+ * -+ * Revision 1.29.2.4 2001/08/18 00:00:36 georgep -+ * Add variable to store annexC pathDelay -+ * -+ * Revision 1.29.2.3 2001/08/08 17:33:27 yongbing -+ * Merge with tag SoftDsl_2_17 -+ * -+ * Revision 1.35 2001/08/29 02:56:01 ilyas -+ * Added tests for flattening/unflatenning command and statuses (dual mode) -+ * -+ * Revision 1.34 2001/08/28 03:26:32 ilyas -+ * Added support for running host and adsl core parts separately ("dual" mode) -+ * -+ * Revision 1.33 2001/06/18 19:49:36 ilyas -+ * Changes to include support for HOST_ONLY mode -+ * -+ * Revision 1.32 2001/05/18 21:21:44 liang -+ * Save the current number of rcv samples to line handler for QProc test. -+ * -+ * Revision 1.31 2001/04/25 01:20:11 ilyas -+ * -+ * Don't use DSL frame functions if ATM_LAYER is not defined -+ * -+ * Revision 1.30 2001/03/25 06:11:20 liang -+ * Combined separate loop attenuation status for ATUR & ATUC into one status. -+ * Replace separate hardware AGC info status for ATUR & ATUC into hardware AGC -+ * request status and hardware AGC obtained status. -+ * Use store AGC command to save hardware AGC value instead of returning value -+ * from status report. -+ * -+ * Revision 1.29 2001/03/17 03:00:46 georgep -+ * Added agcInfo to connectionSetupStruct -+ * -+ * Revision 1.28 2001/02/10 03:03:09 ilyas -+ * Added one more DslFrame function -+ * -+ * Revision 1.27 2000/08/31 19:04:24 liang -+ * Added scratch buffer structure definition. -+ * -+ * Revision 1.26 2000/07/23 20:52:52 ilyas -+ * Added xxxFrameBufSetAddress() function for ATM framer layers -+ * Rearranged linkLayer functions in one structure which is passed as a -+ * parameter to xxxLinkLayerInit() function to be set there -+ * -+ * Revision 1.25 2000/07/18 21:42:25 ilyas -+ * Fixed compiler warning about pointer casting -+ * -+ * Revision 1.24 2000/07/18 21:18:45 ilyas -+ * Added GLOBAL_PTR_BIAS feature to utilize full 64K MIPS relative addressing space -+ * -+ * Revision 1.23 2000/07/18 20:03:24 ilyas -+ * Changed DslFrame functions definitions to macros, -+ * Removed gDslVars from their parameter list -+ * -+ * Revision 1.22 2000/07/17 21:08:15 lkaplan -+ * removed global pointer -+ * -+ * Revision 1.21 2000/05/09 23:00:26 ilyas -+ * Added ATM status messages, ATM timer, Tx frames flush on timeout -+ * Fixed a bug - adding flushed Tx frames to the list of free Rx frames -+ * -+ * Revision 1.20 2000/05/03 03:57:04 ilyas -+ * Added LOG file support for writing ATM data -+ * -+ * Revision 1.19 2000/04/19 00:31:47 ilyas -+ * Added global SoftDsl functions for Vc, added OOB info functions -+ * -+ * Revision 1.18 2000/04/13 08:36:22 yura -+ * Added SoftDslSetRefData, SoftDslGetRefData functions -+ * -+ * Revision 1.17 2000/04/13 05:38:54 georgep -+ * Added T1p413 "Activation and Acknowledgement" which can substitute G994P1 -+ * -+ * Revision 1.16 2000/04/05 22:30:42 liang -+ * Changed function & constant names from G992p2 to G992 for the Main module. -+ * -+ * Revision 1.15 2000/04/04 04:16:06 liang -+ * Merged with SoftDsl_0_03 from old tree. -+ * -+ * Revision 1.15 2000/04/04 01:47:21 ilyas -+ * Implemented abstract dslFrame and dslFrameBuffer objects -+ * -+ * Revision 1.14 2000/04/01 02:53:33 georgep -+ * Added pointer to G992p2Profile inside connectionSetup -+ * -+ * Revision 1.13 2000/03/18 01:27:56 georgep -+ * Changed connectionSetup to include G992p1 Capabilities -+ * -+ * Revision 1.12 2000/02/29 01:39:05 georgep -+ * put variable haveRemoteCapabilities inside connectionSetupStruct -+ * -+ * Revision 1.11 2000/02/08 00:44:36 liang -+ * Fix the gDslVars definition for Irix environment. -+ * -+ * Revision 1.10 1999/11/19 00:59:29 george -+ * Define physicalLayerVars as a union -+ * -+ * Revision 1.9 1999/11/11 19:19:42 george -+ * Porting to 16Bit Compiler -+ * -+ * Revision 1.8 1999/11/09 20:26:17 george -+ * Added G992P2_PROFILE to modules list -+ * -+ * Revision 1.7 1999/10/27 23:01:54 wan -+ * Add G.994.1 setup in dslConnectionSetupStruct for setting up Initiation side -+ * -+ * Revision 1.6 1999/08/12 21:16:27 george -+ * Move profileVars definition to G992p2/G992p2Profile.gh -+ * -+ * Revision 1.5 1999/08/10 18:20:43 george -+ * Define fastRetrainVars -+ * -+ * Revision 1.4 1999/07/16 02:03:02 liang -+ * Added Tx & Rx data handler function pointers. -+ * -+ * Revision 1.3 1999/07/03 01:40:15 liang -+ * Redefined dsl command parameter list and added connection setup struct. -+ * -+ * Revision 1.2 1999/02/10 01:56:37 liang -+ * Added hooks for G994.1 and G992.2. -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef SoftDslGlobals -+#define SoftDslGlobals -+ -+#include "SoftDsl.h" -+ -+#ifdef G992P2_PROFILE -+#include "G992p2Profile.gh" -+#endif -+ -+typedef enum -+ { -+ kVendorUnknown = 0, -+ kVendorBroadcom, -+ kVendorGlobespan, -+ kVendorADI, -+ kVendorTI, -+ kVendorCentillium, -+ kVendorAlcatel, -+ kVendorInfineon -+ } VendorIDType; -+ -+#define kDslVendorFirwareUnknown 0 -+typedef enum -+ { -+ kVendorADI_Anaconda = 1, -+ kVendorADI_ECI918, -+ kVendorADI_ECI930, -+ kVendorADI_Cisco, -+ kVendorADI_UE9000_918, -+ kVendorADI_Samsung_930, -+ kVendorTI_4000C_ERICSSON_350, -+ kVendorTI_4000C_SEIMENS, -+ kVendorADI_ECI16_AnnexB = 50, /* leave space for more Annex A types */ -+ kVendorADI_ECI16A_AnnexB, -+ kVendorTI_4000C_AnnexB, -+ kVendorTI_AC5_AnnexB -+ } VendorFirmwareIDType; -+ -+#define kDslXmtToneSelectionStartTone 0 -+#ifdef G992P1_ANNEX_B -+#define kDslXmtToneSelectionEndTone 63 -+#else -+#define kDslXmtToneSelectionEndTone 31 -+#endif -+#define kDslXmtToneSelectionNumOfTones (kDslXmtToneSelectionEndTone-kDslXmtToneSelectionStartTone+1) -+#define kDslXmtToneSelectionNumOfBytes ((kDslXmtToneSelectionNumOfTones+7)/8) -+#define kDslRcvToneSelectionStartTone 32 -+#define kDslRcvToneSelectionEndTone 255 -+#define kDslRcvToneSelectionNumOfTones (kDslRcvToneSelectionEndTone-kDslRcvToneSelectionStartTone+1) -+#define kDslRcvToneSelectionNumOfBytes ((kDslRcvToneSelectionNumOfTones+7)/8) -+ -+#define kDslT1p413RAckModeTryRAck1 0x01 -+#define kDslT1p413RAckModeTryRAck2 0x02 -+#define kDslT1p413RAckModeTrialMask 0x0F -+#define kDslT1p413RAckModeSelected 0x10 -+#define kDslT1p413RAckModeTrialCount 10 /* when in trial mode */ -+#define kDslT1p413RAckModeSwitchCount 20 /* when mode is selected */ -+ -+#ifdef ADSL_MARGIN_TWEAK_TEST -+#define kDslMarginTweakNumOfTones 256 -+#endif -+ -+typedef struct -+ { -+ Boolean haveRemoteCapabilities; -+ dslModulationType selectedModulation; -+ dslModulationType startupModulation; -+#if defined(G992P1_ANNEX_I) || defined(G992P5) -+ ushort downstreamMinCarr, downstreamMaxCarr; -+#else -+ uchar downstreamMinCarr, downstreamMaxCarr; -+#endif -+ uchar upstreamMinCarr, upstreamMaxCarr; -+#if defined(DOUBLE_UP_STREAM) -+ Boolean isDoubleUsEnabled; -+ short selectedPilotTone; -+#endif -+ dslDataPumpCapabilities localCapabilities, remoteCapabilities; -+#ifdef G992P3 -+ g992p3DataPumpCapabilities localCarrierInfoG992p3AnnexA; -+ g992p3DataPumpCapabilities remoteCarrierInfoG992p3AnnexA; -+ g992p3DataPumpCapabilities selectedCarrierInfoG992p3AnnexA; -+ uchar xmtG992p3State; -+#ifdef G992P5 -+ g992p3DataPumpCapabilities localCarrierInfoG992p5AnnexA; -+ g992p3DataPumpCapabilities remoteCarrierInfoG992p5AnnexA; -+ g992p3DataPumpCapabilities selectedCarrierInfoG992p5AnnexA; -+#endif /* G992P5 */ -+#endif /* G992P3 */ -+ uchar handshakingDuplexMode; -+ Boolean handshakingClientInitiation; -+ short handshakingXmtPowerLevel; -+ uchar handshakingXmtCarrierSet; -+ short hwAgcQ4dB; /* for loop attenuation calculation */ -+ uchar coVendorID; -+#ifdef ADSL_IDENTIFY_VENDOR_FIRMWARE -+ uchar coVendorFirmwareID; -+#endif -+ uchar codingGainDecrement; /* coding gain decrement in Q4dB for initial rate calculation */ -+ uchar xmtToneSelection[kDslXmtToneSelectionNumOfBytes]; -+ uchar rcvToneSelection[kDslRcvToneSelectionNumOfBytes]; -+#ifdef G992_ANNEXC -+ Boolean isFbmMode; -+ Boolean isFbmsOLMode; -+ long xmtToRcvPathDelay; -+#endif -+#if defined(T1P413) && defined(XMT_RACT2_FOR_ADI_COMPATIBILITY) -+ uchar t1p413RAckModeUsed; -+ uchar t1p413RAckModeCounter; -+#endif -+#ifdef G992P1_ANNEX_B -+ uchar badSNR2RetrainCounter; -+#endif -+#ifdef ADSL_MARGIN_TWEAK_TEST -+ short marginTweakExtraPowerQ4dB; -+ char marginTweakTableQ4dB[kDslMarginTweakNumOfTones]; -+#endif -+#ifdef G992P2_PROFILE -+ G992p2ProfileVarsStruct* profileVarsPtr; -+#endif -+#ifdef TDC_IOP_FIX_SEIMENS_TI -+ char t1p413RetrainCounter; /* 0: no retrain needed; 1: force to T1.413 mode and retrain after R-MSG1; 2: 2nd T1.413 session, go to showtime */ -+#endif -+#ifdef ANSI_CACT12_PING_PONG -+ char t1p413SkipToneIndex; /* to alternate between CAct1 and CAct2 detection */ -+#endif -+ } dslConnectionSetupStruct; -+ -+#ifdef ADSL_FRAMER -+#include "MuxFramer.gh" -+#endif -+ -+#ifdef ATM -+#include "SoftAtm.gh" -+#endif -+ -+#ifdef DSL_PACKET -+#include "DslPacket.gh" -+#endif -+ -+#ifdef G997_1_FRAMER -+#include "G997.gh" -+#ifdef G992P3 -+#include "G992p3OvhMsg.gh" -+#endif -+#endif -+ -+#ifdef ADSL_MIB -+#include "AdslMib.gh" -+#endif -+ -+#ifndef HOST_ONLY -+#ifdef T1P413 -+#include "T1p413Main.gh" -+#endif -+ -+#ifdef G994P1 -+#include "G994p1Main.gh" -+#endif -+ -+#ifdef G992 -+#include "G992Main.gh" -+#endif -+ -+#include "SoftDslSampleBuffers.gh" -+#endif -+ -+typedef struct __dslSlowVarsStruct -+ { -+ int tmp; -+ } -+ dslSlowVarsStruct; -+ -+typedef struct __dslVarsStruct -+ { -+ bitMap setup; -+ eyeHandlerType eyeHandlerPtr; -+ logHandlerType logHandlerPtr; -+ dslDriverCallbackType driverCallback; -+ -+ rcvHandlerType rcvHandlerPtr; -+ xmtHandlerType xmtHandlerPtr; -+ -+#ifndef ADSLCORE_ONLY -+ dslCommandHandlerType adslCoreCommandHandlerPtr; -+#endif -+ dslCommandHandlerType dataPumpCommandHandlerPtr; -+ -+ dslStatusHandlerType internalStatusHandlerPtr; -+ dslStatusHandlerType externalStatusHandlerPtr; -+#ifndef ADSLCORE_ONLY -+ dslStatusHandlerType externalLinkLayerStatusHandlerPtr; -+#endif -+ -+ dslDirectionType direction; -+ dslConnectionSetupStruct connectionSetup; -+ -+#ifdef NEC_NSIF_WORKAROUND -+ uchar G994NsStatus; -+ uchar G994NsFailCounter; -+#endif -+ -+ dslFrameHandlerType rxIndicateHandlerPtr; -+ dslFrameHandlerType txCompleteHandlerPtr; -+ -+ linkLayerFunctions LinkLayerFunctions; -+ dslSlowVarsStruct *dslSlowVars; -+ -+#ifdef DSL_FRAME_FUNCTIONS -+ dslFrameFunctions DslFrameFunctions; -+#endif -+ ulong refData; -+ ulong execTime; -+ int currRcvNSamps; -+ -+#ifndef HOST_ONLY -+ DslSampleBuffersStruct sampleBuffersVars; -+ -+#ifdef G992P2_PROFILE -+ G992p2ProfileVarsStruct G992p2ProfileVars; -+#endif -+ -+#ifdef ADSL_FRAMER -+ muxFramerVarsStruct muxFramerVars; -+#endif -+#endif /* HOST_ONLY */ -+ -+#ifdef DSL_LINKLAYER -+ union -+ { -+#ifdef ATM -+ atmVarsStruct atmVars; -+#endif -+#ifdef DSL_PACKET -+ dslPacketVarsStruct dslPacketVars; -+#endif -+ } linkLayerVars; -+#endif -+ -+#ifdef G997_1_FRAMER -+ g997VarsStruct G997Vars; -+#ifdef G992P3 -+ g992p3OvhMsgVarsStruct G992p3OvhMsgVars; -+#endif -+#endif -+ -+#ifdef ADSL_MIB -+ adslMibVarsStruct adslMibVars; -+#endif -+ -+#ifndef HOST_ONLY -+ union -+ { -+#ifdef T1P413 -+ T1p413VarsStruct T1p413Vars; -+#endif -+#ifdef G994P1 -+ G994p1VarsStruct G994p1Vars; -+#endif -+#ifdef G992 -+ G992VarsStruct G992Vars; -+#endif -+ } physicalLayerVars; -+ union -+ { -+#ifdef G992 -+ G992ScratchVarsStruct G992ScratchVars; -+#endif -+#if defined(ADSL_FRAMER) && defined(SHARE_MUX_FRAMER_VARS) -+ muxFramerSharedVarsStruct muxFramerSharedVars; -+#endif -+ } scratchVars; -+#endif /* HOST_ONLY */ -+ -+ } -+ dslVarsStruct; -+ -+#ifndef GLOBAL_PTR_BIAS -+#define gDslGlobalVarPtr ((struct __dslVarsStruct *)gDslVars) -+#define gDslGlobalSlowVarPtr (gDslGlobalVarPtr->dslSlowVars) -+#else -+#define gDslGlobalVarPtr ((struct __dslVarsStruct *) (void*)((uchar*)(gDslVars) - GLOBAL_PTR_BIAS)) -+#define gDslGlobalSlowVarPtr ((struct __dslSlowVarsStruct *) (void*)((uchar*)(gDslGlobalVarPtr->dslSlowVars) - GLOBAL_PTR_BIAS)) -+#endif -+ -+#define gDslSampleBuffersVars (gDslGlobalVarPtr->sampleBuffersVars) -+ -+#define gDslMuxFramerVars (gDslGlobalVarPtr->muxFramerVars) -+#define gDslMuxFramerSharedVars (gDslGlobalVarPtr->scratchVars.muxFramerSharedVars) -+#define gDslLinkLayerVars (gDslGlobalVarPtr->linkLayerVars) -+#define gDslAtmVars (gDslGlobalVarPtr->linkLayerVars.atmVars) -+#define gDslPacketVars (gDslGlobalVarPtr->linkLayerVars.dslPacketVars) -+#define gG997Vars (gDslGlobalVarPtr->G997Vars) -+ -+#ifdef G992P3 -+#define gG992p3OvhMsgVars (gDslGlobalVarPtr->G992p3OvhMsgVars) -+#endif -+ -+#define gAdslMibVars (gDslGlobalVarPtr->adslMibVars) -+ -+#define gT1p413Vars (gDslGlobalVarPtr->physicalLayerVars.T1p413Vars) -+#define gG994p1Vars (gDslGlobalVarPtr->physicalLayerVars.G994p1Vars) -+#define gG992Vars (gDslGlobalVarPtr->physicalLayerVars.G992Vars) -+#define gG992p2ProfileVars (gDslGlobalVarPtr->G992p2ProfileVars) -+ -+#define gG992ScratchVars (gDslGlobalVarPtr->scratchVars.G992ScratchVars) -+ -+#ifndef gEyeHandlerPtr -+#define gEyeHandlerPtr (gDslGlobalVarPtr->eyeHandlerPtr) -+#endif -+ -+#ifndef gLogHandlerPtr -+#define gLogHandlerPtr (gDslGlobalVarPtr->logHandlerPtr) -+#endif -+ -+#ifdef VP_SIMULATOR -+#define gDriverCallback(x) (gDslGlobalVarPtr->driverCallback)(x) -+#else -+#define gDriverCallback(x) -+#endif -+ -+/* -+** -+** Frame functions callouts -+** -+*/ -+ -+#define gDslFrameFunc (gDslGlobalVarPtr->DslFrameFunctions) -+ -+#define DslFrameBufferGetLength(gDslVars, fb) \ -+ gDslFrameFunc.__DslFrameBufferGetLength(fb) -+ -+#define DslFrameBufferGetAddress(gDslVars, fb) \ -+ gDslFrameFunc.__DslFrameBufferGetAddress(fb) -+ -+#define DslFrameBufferSetLength(gDslVars, fb, l) \ -+ gDslFrameFunc.__DslFrameBufferSetLength(fb, l) -+ -+#define DslFrameBufferSetAddress(gDslVars, fb, p) \ -+ gDslFrameFunc.__DslFrameBufferSetAddress(fb, p) -+ -+#define DslFrameInit(gDslVars, f) \ -+ gDslFrameFunc.__DslFrameInit(f) -+ -+#define DslFrameGetLength(gDslVars, pFrame) \ -+ gDslFrameFunc.__DslFrameGetLength(pFrame) -+ -+#define DslFrameGetBufCnt(gDslVars, pFrame) \ -+ gDslFrameFunc.__DslFrameGetBufCnt(pFrame) -+ -+#define DslFrameGetFirstBuffer(gDslVars, pFrame) \ -+ gDslFrameFunc.__DslFrameGetFirstBuffer(pFrame) -+ -+#define DslFrameGetNextBuffer(gDslVars, pFrBuffer) \ -+ gDslFrameFunc.__DslFrameGetNextBuffer(pFrBuffer) -+ -+#define DslFrameSetNextBuffer(gDslVars, pFrBuf, pFrBufNext) \ -+ gDslFrameFunc.__DslFrameSetNextBuffer(pFrBuf, pFrBufNext) -+ -+#define DslFrameGetLastBuffer(gDslVars, pFrame) \ -+ gDslFrameFunc.__DslFrameGetLastBuffer(pFrame) -+ -+#define DslFrameGetLinkFieldAddress(gDslVars, f) \ -+ gDslFrameFunc.__DslFrameGetLinkFieldAddress(f) -+ -+#define DslFrameGetFrameAddressFromLink(gDslVars, lnk) \ -+ gDslFrameFunc.__DslFrameGetFrameAddressFromLink(lnk) -+ -+ -+#define DslFrameGetOobInfo(gDslVars, f, pOobInfo) \ -+ gDslFrameFunc.__DslFrameGetOobInfo(f, pOobInfo) -+ -+#define DslFrameSetOobInfo(gDslVars, f, pOobInfo) \ -+ gDslFrameFunc.__DslFrameSetOobInfo(f, pOobInfo) -+ -+ -+#define DslFrameEnqueBufferAtBack(gDslVars, f, b) \ -+ gDslFrameFunc.__DslFrameEnqueBufferAtBack(f, b) -+ -+#define DslFrameEnqueFrameAtBack(gDslVars, fMain, f) \ -+ gDslFrameFunc.__DslFrameEnqueFrameAtBack(fMain, f) -+ -+#define DslFrameEnqueBufferAtFront(gDslVars, f, b) \ -+ gDslFrameFunc.__DslFrameEnqueBufferAtFront(f, b) -+ -+#define DslFrameEnqueFrameAtFront(gDslVars, fMain, f) \ -+ gDslFrameFunc.__DslFrameEnqueFrameAtFront(fMain, f) -+ -+#define DslFrameDequeBuffer(gDslVars, pFrame) \ -+ gDslFrameFunc.__DslFrameDequeBuffer(pFrame) -+ -+#define DslFrameAllocMemForFrames(gDslVars, frameNum) \ -+ gDslFrameFunc.__DslFrameAllocMemForFrames(frameNum) -+ -+#define DslFrameFreeMemForFrames(gDslVars, hMem) \ -+ gDslFrameFunc.__DslFrameFreeMemForFrames(hMem) -+ -+#define DslFrameAllocFrame(gDslVars, handle) \ -+ gDslFrameFunc.__DslFrameAllocFrame(handle) -+ -+#define DslFrameFreeFrame(gDslVars, handle, pFrame) \ -+ gDslFrameFunc.__DslFrameFreeFrame(handle, pFrame) -+ -+#define DslFrameAllocMemForBuffers(gDslVars, ppMemPool, bufNum, memSize) \ -+ gDslFrameFunc.__DslFrameAllocMemForBuffers(ppMemPool, bufNum, memSize) -+ -+#define DslFrameFreeMemForBuffers(gDslVars, hMem, memSize, pMemPool) \ -+ gDslFrameFunc.__DslFrameFreeMemForBuffers(hMem, memSize, pMemPool) -+ -+#define DslFrameAllocBuffer(gDslVars, handle, pMem, length) \ -+ gDslFrameFunc.__DslFrameAllocBuffer(handle, pMem, length) -+ -+#define DslFrameFreeBuffer(gDslVars, handle, pBuf) \ -+ gDslFrameFunc.__DslFrameFreeBuffer(handle, pBuf) -+ -+#define DslFrame2Id(gDslVars, handle, pFrame) \ -+ gDslFrameFunc.__DslFrame2Id(handle, pFrame) -+ -+#define DslFrameId2Frame(gDslVars, handle, frameId) \ -+ gDslFrameFunc.__DslFrameId2Frame (handle, frameId) -+ -+ -+#endif /* SoftDslGlobals */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftDsl.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftDsl.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftDsl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftDsl.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,2920 @@ -+/**************************************************************************** -+ * -+ * SoftDsl.h -+ * -+ * -+ * Description: -+ * This file contains the exported interface for SoftDsl.c -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.275 $ -+ * -+ * $Id: SoftDsl.h,v 1.275 2005/04/28 22:55:36 ilyas Exp $ -+ * -+ * $Log: SoftDsl.h,v $ -+ * Revision 1.275 2005/04/28 22:55:36 ilyas -+ * Cleaned up kDslG992RunAnnexaP3ModeInAnnexaP5, kG992EnableAnnexM and kDslAtuChangeTxFilterRequest definitions -+ * -+ * Revision 1.274 2005/04/27 20:57:32 yongbing -+ * Implement 32 frequency break points for TSSI, PR 30211 -+ * -+ * Revision 1.273 2005/04/02 03:27:52 kdu -+ * PR30236: Define kDslEnableRoundUpDSLoopAttn, this is shared with kDslCentilliumCRCWorkAroundEnabled. -+ * -+ * Revision 1.272 2005/04/01 21:56:39 ilyas -+ * Added more test commands definitions -+ * -+ * Revision 1.271 2005/02/11 05:03:57 ilyas -+ * Added support for DslOs -+ * -+ * Revision 1.270 2005/02/11 03:33:22 lke -+ * Support 2X, 4X, and 8X spectrum in ANNEX_I DS -+ * -+ * Revision 1.269 2005/01/08 00:11:58 ilyas -+ * Added definition for AnnexL status -+ * -+ * Revision 1.268 2004/12/18 00:52:35 mprahlad -+ * Add Dig US Pwr cutback status -+ * -+ * Revision 1.267 2004/11/08 22:21:38 ytan -+ * init swap state after retrain -+ * -+ * Revision 1.266 2004/11/05 21:16:50 ilyas -+ * Added support for pwmSyncClock -+ * -+ * Revision 1.265 2004/10/28 20:05:17 gsyu -+ * Fixed compilation errors for simulation targets -+ * -+ * Revision 1.264 2004/10/23 00:16:35 nino -+ * Added kDslHardwareSetRcvAGC status to set absolute rcv agc gain. -+ * -+ * Revision 1.263 2004/10/22 21:21:06 ilyas -+ * Fixed bit definition overlap in demodCapabilities -+ * -+ * Revision 1.262 2004/10/20 00:43:20 gsyu -+ * Added constants to support new xmt sample buffer control scheme -+ * -+ * Revision 1.261 2004/10/12 01:09:28 nino -+ * Remove kDslHardwareEnablePwmSyncClk and kDslHardwareSetPwmSyncClkFreq -+ * status definitions. Add kDslEnablePwmSyncClk and kDslSetPwmSyncClkFreq -+ * command definitions. -+ * -+ * Revision 1.260 2004/10/11 20:21:26 nino -+ * Added kDslHardwareEnablePwmSyncClk and kDslHardwareSetPwmSynClkFreq hardware statuses. -+ * -+ * Revision 1.259 2004/10/07 19:17:29 nino -+ * Added kDslHardwareGetRcvAGC status. -+ * -+ * Revision 1.258 2004/10/02 00:17:14 nino -+ * Added kDslHardwareAGCSetPga2 and kDslSetPilotEyeDisplay status definitions. -+ * -+ * Revision 1.257 2004/08/27 01:00:30 mprahlad -+ * -+ * Keep kDslAtuChangeTxFilterRequest defined by default so ADSL1 only targets can -+ * build -+ * -+ * Revision 1.256 2004/08/20 19:00:34 ilyas -+ * Added power management code for 2+ -+ * -+ * Revision 1.255 2004/08/17 23:18:25 kdu -+ * Merged interop changes for TDC lab from a023e9. -+ * -+ * Revision 1.254 2004/07/22 00:56:03 yongbing -+ * Add ADSL2 Annex B modulation definition -+ * -+ * Revision 1.253 2004/07/16 22:23:28 nino -+ * - Defined macros to extract subcarrier and supported set information -+ * for tssi. Subcarrier and suported set indicator is packed into -+ * dsSubcarrier index array. -+ * -+ * Revision 1.252 2004/07/01 00:11:22 nino -+ * Added preliminary code for debugDataHandler (inside of #if DEBUG_DATA_HANDLER). -+ * -+ * Revision 1.251 2004/06/24 03:08:39 ilyas -+ * Added GFC mapping control for ATM bonding -+ * -+ * Revision 1.250 2004/06/23 00:03:20 khp -+ * - shorten self test result register length to 1 (satisfied requirement -+ * at DT, no known requirement anywhere else) -+ * -+ * Revision 1.249 2004/06/15 20:18:33 ilyas -+ * Made D uchar again for compatibility with older ADSl drivers that use this structure. ADSL driver will rely on G992p3 parameters for large D -+ * -+ * Revision 1.248 2004/06/12 00:26:03 gsyu -+ * Added constants for AnnexM -+ * -+ * Revision 1.247 2004/06/10 18:53:24 yjchen -+ * add large D support -+ * -+ * Revision 1.246 2004/06/04 01:55:00 linyin -+ * Add a constant for SRA enable/disable -+ * -+ * Revision 1.245 2004/05/19 23:22:23 linyin -+ * Support L2 -+ * -+ * Revision 1.244 2004/05/15 03:04:58 ilyas -+ * Added L3 test definition -+ * -+ * Revision 1.243 2004/05/14 03:04:38 ilyas -+ * Fixed structure name typo -+ * -+ * Revision 1.242 2004/05/14 02:01:01 ilyas -+ * Fixed structure name typo -+ * -+ * Revision 1.241 2004/05/14 01:21:49 nino -+ * Added kDslSignalAttenuation, kDslAttainableNetDataRate kDslHLinScale constant definitions. -+ * -+ * Revision 1.240 2004/05/13 19:07:58 ilyas -+ * Added new statuses for ADSL2 -+ * -+ * Revision 1.239 2004/05/01 01:09:51 ilyas -+ * Added power management command and statuses -+ * -+ * Revision 1.238 2004/04/23 22:50:38 ilyas -+ * Implemented double buffering to ensure G.997 HDLC frame (OvhMsg) is continuous -+ * -+ * Revision 1.237 2004/03/31 18:57:39 ilyas -+ * Added drop on data error capability control -+ * -+ * Revision 1.236 2004/03/30 03:11:30 ilyas -+ * Added #ifdef for CFE build -+ * -+ * Revision 1.235 2004/03/29 23:06:39 ilyas -+ * Added status for BG table update -+ * -+ * Revision 1.234 2004/03/17 02:49:49 ilyas -+ * Turn off ATM bit reversal for Alcatel DSLAM only -+ * -+ * Revision 1.233 2004/03/11 03:09:48 mprahlad -+ * Add test mode for afeloopback test -+ * -+ * Revision 1.232 2004/03/10 23:15:53 ilyas -+ * Added ETSI modem support -+ * -+ * Revision 1.231 2004/03/04 19:28:14 linyin -+ * Support adsl2plus -+ * -+ * Revision 1.230 2004/02/28 00:06:21 ilyas -+ * Added OLR message definitions for ADSL2+ -+ * -+ * Revision 1.229 2004/02/13 03:21:15 mprahlad -+ * define kDslAturHwAgcMaxGain correctly for 6348 -+ * -+ * Revision 1.228 2004/02/09 05:06:17 yongbing -+ * Add ADSL2 bit swap function -+ * -+ * Revision 1.227 2004/02/04 02:08:19 linyin -+ * remove the redefined kG992p5AnnexA -+ * -+ * Revision 1.226 2004/02/04 01:41:48 linyin -+ * Add some variables for G992P5 -+ * -+ * Revision 1.225 2004/02/03 19:12:22 gsyu -+ * Added a dedicate structure and constants for G992P5 -+ * -+ * Revision 1.224 2004/01/24 01:18:34 ytan -+ * add multi-section swapping flag -+ * -+ * Revision 1.223 2004/01/17 00:21:48 ilyas -+ * Added commands and statuses for OLR -+ * -+ * Revision 1.222 2004/01/13 19:12:37 gsyu -+ * Added more constants for Double upstream -+ * -+ * Revision 1.221 2003/12/23 21:19:04 mprahlad -+ * Define BCM6348_TEMP_MOVE_TO_LMEM to FAST_TEXT for 6348 targets - this is for -+ * ADSL2/AnnexA multimode builds - move a few functions to Lmem for now to avoid -+ * changes for swap on 6348. -+ * -+ * Revision 1.220 2003/12/19 21:21:53 ilyas -+ * Added dying gasp support for ADSL2 -+ * -+ * Revision 1.219 2003/12/05 02:09:51 mprahlad -+ * Leave the AnalogEC defs in - saves ifdef-ing all uses of these defines. -+ * Include Bcm6345_To_Bcm6348.h - to be able to pick up macros for the -+ * transition -+ * -+ * Revision 1.218 2003/12/04 02:10:58 linyin -+ * Redefine some constants for supporting different pilot and TTR -+ * -+ * Revision 1.217 2003/12/03 02:24:39 gsyu -+ * Reverse previous check in for Double Upstream demo -+ * -+ * Revision 1.215 2003/11/20 00:58:47 yongbing -+ * Merge ADSL2 functionalities into Annex A branch -+ * -+ * Revision 1.214 2003/11/06 00:35:06 nino -+ * Added kDslWriteAfeRegCmd and kDslReadAfeRegCmd commands. -+ * -+ * Revision 1.213 2003/11/05 21:04:23 ilyas -+ * Added more codes for LOG data -+ * -+ * Revision 1.212 2003/10/22 00:51:52 yjchen -+ * define constant for quiet line noise -+ * -+ * Revision 1.211 2003/10/20 22:08:57 nino -+ * Added kDslSetRcvGainCmd and kDslBypassRcvHpfCmd debug commands. -+ * -+ * Revision 1.210 2003/10/18 00:04:59 yjchen -+ * define constants for G992P3 diagnostic mode channel response -+ * -+ * Revision 1.209 2003/10/17 22:41:29 yongbing -+ * Add INP message support -+ * -+ * Revision 1.208 2003/10/16 00:06:09 uid1249 -+ * Moved G.994 definitions from G.994p1MainTypes.h -+ * -+ * Revision 1.207 2003/10/15 20:45:11 linyin -+ * Add some constants for support Revision 2 -+ * -+ * Revision 1.206 2003/10/14 22:04:02 ilyas -+ * Added Nino's AFE statuses for 6348 -+ * -+ * Revision 1.205 2003/10/10 18:49:26 gsyu -+ * Added test modes to workaround the clock domain crossing bug, PR18038 -+ * -+ * Revision 1.204 2003/09/30 19:27:46 mprahlad -+ * ifdef AnalogEC definies with #ifndef BCM6348_SRC -+ * -+ * Revision 1.203 2003/09/26 19:36:34 linyin -+ * Add annexi constant and vars -+ * -+ * Revision 1.202 2003/09/25 20:16:13 yjchen -+ * remove featureNTR definition -+ * -+ * Revision 1.201 2003/09/08 20:29:51 ilyas -+ * Added test commands for chip regression tests -+ * -+ * Revision 1.200 2003/08/26 00:58:14 ilyas -+ * Added I432 reset command (for header compression) -+ * Fixed SoftDsl time (for I432 header compression) -+ * -+ * Revision 1.199 2003/08/26 00:37:29 ilyas -+ * #ifdef'ed DslFrameFunctions in dslCommand structure to save space -+ * -+ * Revision 1.198 2003/08/22 22:45:00 liang -+ * Change the NF field in G992CodingParams from uchar to ushort to support K=256 (dataRate=255*32kbps) in fast path. -+ * -+ * Revision 1.197 2003/08/21 21:19:05 ilyas -+ * Changed dataPumpCapabilities structure for G992P3 -+ * -+ * Revision 1.196 2003/08/12 22:44:28 khp -+ * - for Haixiang: added kDslTestMarginTweak command and marginTweakSpec -+ * -+ * Revision 1.195 2003/07/24 17:28:16 ovandewi -+ * added Tx filter change request code -+ * -+ * Revision 1.194 2003/07/24 15:48:55 yongbing -+ * Reduce TSSI buffer size to avoid crash at the beginning of G.994.1. Need to find out why -+ * -+ * Revision 1.193 2003/07/19 07:11:47 nino -+ * Revert back to version 1.191. -+ * -+ * Revision 1.191 2003/07/17 21:25:25 yongbing -+ * Add support for READSL2 and TSSI -+ * -+ * Revision 1.190 2003/07/14 19:42:33 yjchen -+ * add constants for G992P3 -+ * -+ * Revision 1.189 2003/07/10 23:07:11 liang -+ * Add demodCapability bit to minimize showtime ATUC xmt power through b&g table. -+ * -+ * Revision 1.188 2003/07/08 22:18:50 liang -+ * Added demodCapability bit for G.994.1 Annex A multimode operation. -+ * -+ * Revision 1.187 2003/07/07 23:24:43 ilyas -+ * Added G.dmt.bis definitions -+ * -+ * Revision 1.186 2003/06/25 02:44:02 liang -+ * Added demod capability bit kDslUE9000ADI918FECFixEnabled. -+ * Added back kDslHWEnableAnalogECUpdate & kDslHWEnableAnalogEC for backward compatibility (annex A). -+ * -+ * Revision 1.185 2003/06/18 01:39:19 ilyas -+ * Added AFE test commands. Add #defines for driver's builds -+ * -+ * Revision 1.184 2003/06/06 23:58:09 ilyas -+ * Added command and status for standalone AFE tests -+ * -+ * Revision 1.183 2003/05/29 21:09:32 nino -+ * - kDslHWEnableAnalogECUpdate define replaced with kDslHWSetDigitalEcUpdateMode -+ * - kDslHWEnableAnalogEC define replaced with kDslHWDisableDigitalECUpdate -+ * -+ * Revision 1.182 2003/04/15 22:08:15 liang -+ * Changed one of the demodCapability bit name from last checkin. -+ * -+ * Revision 1.181 2003/04/13 19:25:54 liang -+ * Added three more demodCapability bits. -+ * -+ * Revision 1.180 2003/04/02 02:09:17 liang -+ * Added demodCapability bit for ADI low rate option fix disable. -+ * -+ * Revision 1.179 2003/03/18 18:22:06 yongbing -+ * Use 32 tap TEQ for Annex I -+ * -+ * Revision 1.178 2003/03/06 00:58:07 ilyas -+ * Added SetStausBuffer command -+ * -+ * Revision 1.177 2003/02/25 00:46:26 ilyas -+ * Added T1.413 EOC vendor ID -+ * -+ * Revision 1.176 2003/02/21 23:30:54 ilyas -+ * Added Xmtgain command framing mode status and T1413VendorId parameters -+ * -+ * Revision 1.175 2003/02/07 22:13:55 liang -+ * Add demodCapabilities bits for sub-sample alignment and higher T1.413 level (used internally only). -+ * -+ * Revision 1.174 2003/01/23 02:54:07 liang -+ * Added demod capability bit for bitswap enable. -+ * -+ * Revision 1.173 2002/12/13 18:36:33 yongbing -+ * Add support for G.992.2 Annex C -+ * -+ * Revision 1.172 2002/12/10 23:27:12 ilyas -+ * Extended dslException parameter structure to allow printout from DslDiags -+ * -+ * Revision 1.171 2002/12/06 02:10:19 liang -+ * Moved the T1.413 RAck1/RAck2 switching variables to connection setup structure. -+ * Added/Modified the training progress codes for T1.413 RAck1/RAck2 and upstream 2x IFFT disable. -+ * -+ * Revision 1.170 2002/11/11 00:20:05 liang -+ * Add demod capability constant for internally disabling upstream 2x IFFT in T1.413 mode. -+ * -+ * Revision 1.169 2002/11/06 03:46:19 liang -+ * Add training progress code for upstream 2x IFFT disable. -+ * -+ * Revision 1.168 2002/11/01 01:41:06 ilyas -+ * Added flags for Centillium 4103 workarround -+ * -+ * Revision 1.167 2002/10/26 01:26:11 gsyu -+ * Move SoftDslLineHandler from SDRAM to LMEM -+ * -+ * Revision 1.166 2002/10/20 18:56:20 khp -+ * - for linyin -+ * - #ifdef NEC_NSIF_WORKAROUND: -+ * - add macros to extract NSIF status and fail counter vars -+ * -+ * Revision 1.165 2002/10/14 05:24:35 liang -+ * Add training status code to request alternate xmt filter (for Samsung 6-port ADI918 DSLAMs) to meet KT 2km spec. -+ * -+ * Revision 1.164 2002/10/08 21:44:50 ilyas -+ * Fixed EOC stuffing byte to indicate "no synchronization" action -+ * -+ * Revision 1.163 2002/10/03 19:34:24 ilyas -+ * Added size for EOC serial number register -+ * -+ * Revision 1.162 2002/09/28 02:42:27 yongbing -+ * Add retrain in T1.413 with R-Ack1 tone -+ * -+ * Revision 1.161 2002/09/28 01:23:35 gsyu -+ * Reverse us2xifft change so that we can install new us2xifft on the tree -+ * -+ * Revision 1.160 2002/09/26 23:30:48 yongbing -+ * Add synch symbol detection in Showtime -+ * -+ * Revision 1.159 2002/09/20 23:47:52 khp -+ * - for gsyu: enable 2X IFFT for Annex A (XMT_FFT_SIZE_2X) -+ * -+ * Revision 1.158 2002/09/14 03:26:39 ilyas -+ * Changed far-end RDI reporting -+ * -+ * Revision 1.157 2002/09/13 21:10:54 ilyas -+ * Added reporting of remote modem LOS and RDI. -+ * Moved G992CodingParams definition to SoftDsl.h -+ * -+ * Revision 1.156 2002/09/12 21:07:19 ilyas -+ * Added HEC, OCD and LCD counters -+ * -+ * Revision 1.155 2002/09/09 21:31:30 linyin -+ * Add two constant to support long reach -+ * -+ * Revision 1.154 2002/09/07 01:31:51 ilyas -+ * Added support for OEM parameters -+ * -+ * Revision 1.153 2002/09/04 22:36:14 mprahlad -+ * defines for non standard info added -+ * -+ * Revision 1.152 2002/08/02 21:59:09 liang -+ * Enable G.992.2 carrierInfo in capabitilities when G.992.1 annex A is used for G.992.2. -+ * -+ * Revision 1.151 2002/07/29 20:01:03 ilyas -+ * Added command for Atm VC map table change -+ * -+ * Revision 1.150 2002/07/18 22:30:47 liang -+ * Add xmt power and power cutback related constants. -+ * -+ * Revision 1.149 2002/07/11 01:30:58 ilyas -+ * Changed status for ShowtimeMargin reporting -+ * -+ * Revision 1.148 2002/07/09 19:19:09 ilyas -+ * Added status parameters for ShowtimeSNRMargin info and command to filter -+ * out SNR margin data -+ * -+ * Revision 1.147 2002/06/27 21:50:24 liang -+ * Added test command related demodCapabilities bits. -+ * -+ * Revision 1.146 2002/06/26 21:29:00 liang -+ * Added dsl test cmd structure and showtime margin connection info status. -+ * -+ * Revision 1.145 2002/06/15 05:15:51 ilyas -+ * Added definitions for Ping, Dying Gasp and other test commands -+ * -+ * Revision 1.144 2002/05/30 19:55:15 ilyas -+ * Added status for ADSL PHY MIPS exception -+ * Changed conflicting definition for higher rates (S=1/2) -+ * -+ * Revision 1.143 2002/05/21 23:41:07 yongbing -+ * First check-in of Annex C S=1/2 codes -+ * -+ * Revision 1.142 2002/04/29 22:25:09 georgep -+ * Merge from branch annexC_demo - add status message constants -+ * -+ * Revision 1.141 2002/04/18 19:00:35 ilyas -+ * Added include file for builds in CommEngine environment -+ * -+ * Revision 1.140 2002/04/18 00:18:36 yongbing -+ * Add detailed timeout error messages -+ * -+ * Revision 1.139 2002/04/02 10:03:18 ilyas -+ * Merged BERT from AnnexA branch -+ * -+ * Revision 1.138 2002/03/26 01:42:29 ilyas -+ * Added timeout message constants for annex C -+ * -+ * Revision 1.137 2002/03/22 19:39:22 yongbing -+ * Modify for co-exist of G994P1 and T1P413 -+ * -+ * Revision 1.136 2002/03/22 01:19:40 ilyas -+ * Add status message constants for total FEXT Bits, NEXT bits -+ * -+ * Revision 1.135 2002/03/10 22:32:24 liang -+ * Added report constants for LOS recovery and timing tone index. -+ * -+ * Revision 1.134 2002/03/07 22:06:32 georgep -+ * Replace ifdef G992P1 with G992P1_ANNEX_A for annex A variables -+ * -+ * Revision 1.133 2002/02/16 01:08:18 georgep -+ * Add log constant for showtime mse -+ * -+ * Revision 1.132 2002/02/08 04:36:27 ilyas -+ * Added commands for LOG file and fixed Idle mode pointer update -+ * -+ * Revision 1.131 2002/01/24 20:21:30 georgep -+ * Add logging defines, remove fast retrain defines -+ * -+ * Revision 1.130 2002/01/19 23:59:17 ilyas -+ * Added support for LOG and eye data to ADSL core target -+ * -+ * Revision 1.129 2002/01/16 23:43:54 liang -+ * Remove the carriage return character from last checkin. -+ * -+ * Revision 1.128 2002/01/15 22:27:13 ilyas -+ * Added command for ADSL loopback -+ * -+ * Revision 1.127 2002/01/10 07:18:22 ilyas -+ * Added status for printf (mainly for ADSL core debugging) -+ * -+ * Revision 1.126 2001/12/21 22:45:34 ilyas -+ * Added support for ADSL MIB data object -+ * -+ * Revision 1.125 2001/12/13 02:24:22 ilyas -+ * Added G997 (Clear EOC and G997 framer) support -+ * -+ * Revision 1.124 2001/11/30 05:56:31 liang -+ * Merged top of the branch AnnexBDevelopment onto top of the tree. -+ * -+ * Revision 1.123 2001/11/15 19:01:07 yongbing -+ * Modify only T1.413 part to the top of tree based on AnnexBDevelopment branch -+ * -+ * Revision 1.122 2001/10/19 00:12:07 ilyas -+ * Added support for frame oriented (no ATM) data link layer -+ * -+ * Revision 1.121 2001/10/09 22:35:13 ilyas -+ * Added more ATM statistics and OAM support -+ * -+ * Revision 1.105.2.20 2001/11/27 02:32:03 liang -+ * Combine vendor ID, serial #, and version number into SoftModemVersionNumber.c. -+ * -+ * Revision 1.105.2.19 2001/11/21 01:29:14 georgep -+ * Add a status message define for annexC -+ * -+ * Revision 1.105.2.18 2001/11/08 23:26:28 yongbing -+ * Add carrier selection function for Annex A and B -+ * -+ * Revision 1.105.2.17 2001/11/07 22:55:30 liang -+ * Report G992 rcv msg CRC error as what it is instead of time out. -+ * -+ * Revision 1.105.2.16 2001/11/05 19:56:21 liang -+ * Add DC offset info code. -+ * -+ * Revision 1.105.2.15 2001/10/16 00:47:16 yongbing -+ * Add return-to-T1p413 starting point if in error -+ * -+ * Revision 1.105.2.14 2001/10/15 23:14:01 yjchen -+ * remove ADSL_SINGLE_SYMBOL_BLOCK -+ * -+ * Revision 1.105.2.13 2001/10/12 18:07:16 yongbing -+ * Add support for T1.413 -+ * -+ * Revision 1.105.2.12 2001/10/04 00:23:52 liang -+ * Add connection info constants for TEQ coef and PSD. -+ * -+ * Revision 1.105.2.11 2001/10/03 01:44:01 liang -+ * Merged with codes from main tree (tag SoftDsl_2_18). -+ * -+ * Revision 1.105.2.10 2001/09/28 22:10:04 liang -+ * Add G994 exchange message status reports. -+ * -+ * Revision 1.105.2.9 2001/09/26 18:08:21 georgep -+ * Send status error message in case features field is not setup properly -+ * -+ * Revision 1.105.2.8 2001/09/05 01:58:13 georgep -+ * Added status message for annexC measured delay -+ * -+ * Revision 1.105.2.7 2001/08/29 00:37:52 georgep -+ * Add log constants for annexC -+ * -+ * Revision 1.105.2.6 2001/08/18 00:01:34 georgep -+ * Add constants for annexC -+ * -+ * Revision 1.105.2.5 2001/08/08 17:33:28 yongbing -+ * Merge with tag SoftDsl_2_17 -+ * -+ * Revision 1.120 2001/08/29 02:56:01 ilyas -+ * Added tests for flattening/unflatenning command and statuses (dual mode) -+ * -+ * Revision 1.119 2001/08/28 03:26:32 ilyas -+ * Added support for running host and adsl core parts separately ("dual" mode) -+ * -+ * Revision 1.118 2001/08/16 02:16:10 khp -+ * - mark functions with FAST_TEXT to reduce cycle counts for QPROC targets -+ * (replaces use of LMEM_INSN) -+ * -+ * Revision 1.117 2001/06/18 20:06:35 ilyas -+ * Added forward declaration of dslCommandStruc to avoid gcc warnings -+ * -+ * Revision 1.116 2001/06/18 19:49:36 ilyas -+ * Changes to include support for HOST_ONLY mode -+ * -+ * Revision 1.115 2001/06/01 22:00:33 ilyas -+ * Changed ATM PHY interface to accomodate UTOPIA needs -+ * -+ * Revision 1.114 2001/05/16 06:22:24 liang -+ * Added status reports for xmt & rcv prefix enable position. -+ * -+ * Revision 1.113 2001/05/02 20:34:32 georgep -+ * Added log constants for snr1 calculation -+ * -+ * Revision 1.112 2001/04/25 01:20:11 ilyas -+ * -+ * Don't use DSL frame functions if ATM_LAYER is not defined -+ * -+ * Revision 1.111 2001/04/17 21:13:00 georgep -+ * Define status constant kDslHWSetDigitalEcUpdateShift -+ * -+ * Revision 1.110 2001/04/16 23:38:36 georgep -+ * Add HW AGC constants for ATUR -+ * -+ * Revision 1.109 2001/04/06 23:44:53 georgep -+ * Added status constant for setting up digitalEcGainShift -+ * -+ * Revision 1.108 2001/03/29 05:58:34 liang -+ * Replaced the Aware compatibility codes with automatic detection codes. -+ * -+ * Revision 1.107 2001/03/25 06:11:22 liang -+ * Combined separate loop attenuation status for ATUR & ATUC into one status. -+ * Replace separate hardware AGC info status for ATUR & ATUC into hardware AGC -+ * request status and hardware AGC obtained status. -+ * Use store AGC command to save hardware AGC value instead of returning value -+ * from status report. -+ * -+ * Revision 1.106 2001/03/24 00:43:22 liang -+ * Report more checksum results (NumOfCalls, txSignal, rxSignal & eyeData). -+ * -+ * Revision 1.105 2001/03/16 23:57:31 georgep -+ * Added more loop attenuation reporting status constants -+ * -+ * Revision 1.104 2001/03/15 00:22:07 liang -+ * Back to version 1.101. -+ * -+ * Revision 1.103 2001/03/15 00:03:44 yjchen -+ * use kDslATURHardwareAGCInfo for AltoE14 AGC as well -+ * -+ * Revision 1.102 2001/03/14 23:10:56 yjchen -+ * add defns for AltoE14 AGC -+ * -+ * Revision 1.101 2001/03/08 23:31:34 georgep -+ * Added R, S, D, coding parameters to dslDataPumpCapabilities -+ * -+ * Revision 1.100 2001/02/10 03:03:09 ilyas -+ * Added one more DslFrame function -+ * -+ * Revision 1.99 2001/02/09 01:55:27 ilyas -+ * Added status codes and macros to support printing of AAL packets -+ * -+ * Revision 1.98 2001/01/30 23:28:10 georgep -+ * Added kDslDspControlStatus for handling changes to dsp params -+ * -+ * Revision 1.97 2001/01/12 01:17:18 georgep -+ * Added bit in demodCapabilities for analog echo cancellor -+ * -+ * Revision 1.96 2001/01/04 05:51:03 ilyas -+ * Added more dslStatuses -+ * -+ * Revision 1.95 2000/12/21 05:46:07 ilyas -+ * Added name for struct _dslFrame -+ * -+ * Revision 1.94 2000/12/13 22:04:39 liang -+ * Add Reed-Solomon coding enable bit in demodCapabilities. -+ * -+ * Revision 1.93 2000/11/29 20:42:02 liang -+ * Add defines for SNR & max achivable rate status and DEC enable demodCapabilities bit. -+ * -+ * Revision 1.92 2000/09/22 21:55:13 ilyas -+ * Added support for DSL + Atm physical layer only (I.432) simulations -+ * -+ * Revision 1.91 2000/09/10 09:20:53 lkaplan -+ * Improve interface for sending Eoc messages -+ * -+ * Revision 1.90 2000/09/08 19:37:58 lkaplan -+ * Added code for handling EOC messages -+ * -+ * Revision 1.89 2000/09/07 23:02:27 georgep -+ * Add HarwareAGC Bit to demod Capabilities -+ * -+ * Revision 1.88 2000/09/01 00:57:34 georgep -+ * Added Hardware AGC status defines -+ * -+ * Revision 1.87 2000/08/31 19:04:26 liang -+ * Added external reference for stack size requirement test functions. -+ * -+ * Revision 1.86 2000/08/24 23:16:46 liang -+ * Increased sample block size for noBlock. -+ * -+ * Revision 1.85 2000/08/23 18:34:39 ilyas -+ * Added XxxVcConfigure function -+ * -+ * Revision 1.84 2000/08/05 00:25:04 georgep -+ * Redefine sampling freq constants -+ * -+ * Revision 1.83 2000/08/03 14:04:00 liang -+ * Add hardware time tracking clock error reset code. -+ * -+ * Revision 1.82 2000/07/23 20:52:52 ilyas -+ * Added xxxFrameBufSetAddress() function for ATM framer layers -+ * Rearranged linkLayer functions in one structure which is passed as a -+ * parameter to xxxLinkLayerInit() function to be set there -+ * -+ * Revision 1.81 2000/07/18 20:03:24 ilyas -+ * Changed DslFrame functions definitions to macros, -+ * Removed gDslVars from their parameter list -+ * -+ * Revision 1.80 2000/07/17 21:08:15 lkaplan -+ * removed global pointer -+ * -+ * Revision 1.79 2000/06/21 20:38:44 georgep -+ * Added bit to demodCapabilities for HW_TIME_TRACKING -+ * -+ * Revision 1.78 2000/06/19 19:57:55 georgep -+ * Added constants for logging of HWResampler data -+ * -+ * Revision 1.77 2000/06/02 18:57:21 ilyas -+ * Added support for DSL buffers consisting of many ATM cells -+ * -+ * Revision 1.76 2000/05/27 02:19:28 liang -+ * G992MonitorParams structure is moved here, and Tx/Rx data handler type definitions changed. -+ * -+ * Revision 1.75 2000/05/15 18:17:21 liang -+ * Added statuses for sent and received frames -+ * -+ * Revision 1.74 2000/05/14 01:56:38 ilyas -+ * Added ATM cell printouts -+ * -+ * Revision 1.73 2000/05/09 23:00:26 ilyas -+ * Added ATM status messages, ATM timer, Tx frames flush on timeout -+ * Fixed a bug - adding flushed Tx frames to the list of free Rx frames -+ * -+ * Revision 1.72 2000/05/03 18:01:18 georgep -+ * Removed old function declarations for Eoc/Aoc -+ * -+ * Revision 1.71 2000/05/03 03:57:04 ilyas -+ * Added LOG file support for writing ATM data -+ * -+ * Revision 1.70 2000/05/02 00:04:36 liang -+ * Add showtime monitoring and message exchange info constants. -+ * -+ * Revision 1.69 2000/04/28 23:34:20 yongbing -+ * Add constants for reporting error events in performance monitoring -+ * -+ * Revision 1.68 2000/04/21 23:09:04 liang -+ * Added G992 time out training progress constant. -+ * -+ * Revision 1.67 2000/04/19 00:31:47 ilyas -+ * Added global SoftDsl functions for Vc, added OOB info functions -+ * -+ * Revision 1.66 2000/04/18 00:45:31 yongbing -+ * Add G.DMT new frame structure, define G992P1_NEWFRAME to enable, need ATM layer to work -+ * -+ * Revision 1.65 2000/04/15 01:48:34 georgep -+ * Added T1p413 status constants -+ * -+ * Revision 1.64 2000/04/13 08:36:22 yura -+ * Added SoftDslSetRefData, SoftDslGetRefData functions -+ * -+ * Revision 1.63 2000/04/13 05:42:35 georgep -+ * Added constant for T1p413 -+ * -+ * Revision 1.62 2000/04/05 21:49:54 liang -+ * minor change. -+ * -+ * Revision 1.61 2000/04/04 04:16:06 liang -+ * Merged with SoftDsl_0_03 from old tree. -+ * -+ * Revision 1.65 2000/04/04 01:47:21 ilyas -+ * Implemented abstract dslFrame and dslFrameBuffer objects -+ * -+ * Revision 1.64 2000/04/01 08:12:10 yura -+ * Added preliminary revision of the SoftDsl driver architecture -+ * -+ * Revision 1.63 2000/04/01 02:55:33 georgep -+ * New defines for G992p2Profile Structure -+ * -+ * Revision 1.62 2000/04/01 00:50:36 yongbing -+ * Add initial version of new frame structure for full-rate -+ * -+ * Revision 1.61 2000/03/24 03:30:45 georgep -+ * Define new constant kDslUpstreamSamplingFreq -+ * -+ * Revision 1.60 2000/03/23 19:51:30 georgep -+ * Define new features bits for G992p1 -+ * -+ * Revision 1.59 2000/03/18 01:28:41 georgep -+ * Changed connectionSetup to include G992p1 Capabilities -+ * -+ * Revision 1.58 2000/02/29 01:40:03 georgep -+ * Changed modulationtype defines to be the same as SPAR1 in G994p1 -+ * -+ * Revision 1.57 1999/11/19 01:03:19 george -+ * Use Block Size 256 for single symbol Mode -+ * -+ * Revision 1.56 1999/11/18 02:37:43 george -+ * Porting to 16Bit -+ * -+ * Revision 1.55 1999/11/12 02:12:55 george -+ * Added status constant for reporting of profile channel matching calculation -+ * -+ * Revision 1.54 1999/11/11 19:19:42 george -+ * Porting to 16Bit Compiler -+ * -+ * Revision 1.53 1999/11/05 01:27:06 liang -+ * Add recovery-from-inpulse-noise progress report. -+ * -+ * Revision 1.52 1999/11/02 02:06:27 george -+ * Added SNRMargin training status value -+ * -+ * Revision 1.51 1999/10/27 23:02:03 wan -+ * Add G.994.1 setup in dslConnectionSetupStruct for setting up Initiation side -+ * -+ * Revision 1.50 1999/10/25 21:55:36 liang -+ * Renamed the constant for FEQ output error. -+ * -+ * Revision 1.49 1999/10/23 02:20:55 george -+ * Add debug data codes -+ * -+ * Revision 1.48 1999/10/19 23:59:06 liang -+ * Change line handler interface to work with nonsymmetric sampling freq. -+ * -+ * Revision 1.47 1999/10/09 01:38:04 george -+ * Define maxProfileNumber -+ * -+ * Revision 1.46 1999/10/07 23:30:51 wan -+ * Add G.994.1 Tone and Fast Retrain Recov detections in G.992p2 SHOWTIME and Fast Retrain -+ * -+ * Revision 1.45 1999/10/06 13:59:27 liang -+ * Escape to G994.1 should be done through status instead of command. -+ * -+ * Revision 1.44 1999/10/06 02:01:28 george -+ * Add kDslReturnToG994p1Cmd -+ * -+ * Revision 1.43 1999/09/30 19:29:58 george -+ * Add reporting constant for Fast Retrain -+ * -+ * Revision 1.42 1999/09/16 23:41:56 liang -+ * Added command for host forced retrain. -+ * -+ * Revision 1.41 1999/08/20 00:47:25 wan -+ * Add constants for Fast Retrain progress status -+ * -+ * Revision 1.40 1999/08/16 18:06:01 wan -+ * Add more reporting constants for Fast Retrain -+ * -+ * Revision 1.39 1999/08/12 00:18:10 wan -+ * Add several Fast Retrain Status constants -+ * -+ * Revision 1.38 1999/08/10 18:25:38 george -+ * Define constants used for Fast Retrain -+ * -+ * Revision 1.37 1999/07/31 01:47:43 george -+ * Add status constants for eoc/aoc -+ * -+ * Revision 1.36 1999/07/27 18:19:52 george -+ * declare aoc/eoc functions -+ * -+ * Revision 1.35 1999/07/19 22:44:47 george -+ * Add constants for G994p1 Message Exchange -+ * -+ * Revision 1.34 1999/07/16 02:03:03 liang -+ * Modified Dsl link layer command spec structure. -+ * -+ * Revision 1.33 1999/07/14 22:53:16 george -+ * Add Constants for G994p1 -+ * -+ * Revision 1.32 1999/07/13 00:02:26 liang -+ * Added more feature bits. -+ * -+ * Revision 1.31 1999/07/09 01:58:14 wan -+ * Added more constants G.994.1 testing reports -+ * -+ * Revision 1.30 1999/07/07 23:51:04 liang -+ * Added rcv power and loop attenuation reports. -+ * -+ * Revision 1.29 1999/07/06 21:32:01 liang -+ * Added some aux. feature bits, and field performanceMargin was changed to noiseMargin in Capabilities. -+ * -+ * Revision 1.28 1999/07/03 01:40:17 liang -+ * Redefined dsl command parameter list and added connection setup struct. -+ * -+ * Revision 1.27 1999/07/02 00:41:18 liang -+ * Add bit and gain logging as well as rcv carrier range status. -+ * -+ * Revision 1.26 1999/06/25 21:37:10 wan -+ * Work in progress for G994.1. -+ * -+ * Revision 1.25 1999/06/16 00:54:36 liang -+ * Added Tx/Rx SHOWTIME active training progress codes. -+ * -+ * Revision 1.24 1999/06/11 21:59:37 wan -+ * Added G994.1 fail status constant. -+ * -+ * Revision 1.23 1999/06/11 21:29:01 liang -+ * Constants for C/R-Msgs was changed to C/R-Msg. -+ * -+ * Revision 1.22 1999/06/08 02:49:42 liang -+ * Added SNR data logging. -+ * -+ * Revision 1.21 1999/06/07 21:05:08 liang -+ * Added more training status values. -+ * -+ * Revision 1.20 1999/05/22 02:18:26 liang -+ * More constant defines. -+ * -+ * Revision 1.19 1999/05/14 22:49:35 liang -+ * Added more status codes and debug data codes. -+ * -+ * Revision 1.18 1999/04/12 22:41:39 liang -+ * Work in progress. -+ * -+ * Revision 1.17 1999/04/01 20:28:07 liang -+ * Added RReverb detect event status. -+ * -+ * Revision 1.16 1999/03/26 03:29:54 liang -+ * Add DSL debug data constants. -+ * -+ * Revision 1.15 1999/03/08 21:58:00 liang -+ * Added more constant definitions. -+ * -+ * Revision 1.14 1999/03/02 01:49:36 liang -+ * Added more connection info codes. -+ * -+ * Revision 1.13 1999/03/02 00:25:55 liang -+ * Added DSL tx and rx data handler type definitions. -+ * -+ * Revision 1.12 1999/02/27 01:16:55 liang -+ * Increase allowable static memory size to a VERY large number for now. -+ * -+ * Revision 1.11 1999/02/25 00:24:06 liang -+ * Increased symbol block size to 16. -+ * -+ * Revision 1.10 1999/02/23 22:03:26 liang -+ * Increased maximal static memory size allowed. -+ * -+ * Revision 1.9 1999/02/17 02:39:21 ilyas -+ * Changes for NDIS -+ * -+ * Revision 1.8 1999/02/11 22:44:30 ilyas -+ * More definitions for ATM -+ * -+ * Revision 1.7 1999/02/10 01:56:38 liang -+ * Added hooks for G994.1 and G992.2. -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef SoftDslHeader -+#define SoftDslHeader -+ -+/* for builds in Linux/VxWorks CommEngine environment */ -+#if (defined(__KERNEL__) && !defined(LINUX_DRIVER)) || defined(VXWORKS) || defined(_WIN32_WCE) || defined(TARG_OS_RTEMS) || defined(_CFE_) -+#include "AdslCoreDefs.h" -+#else -+#include "Bcm6345_To_Bcm6348.h" /* File for 45->48 changes */ -+#endif -+ -+#ifndef SoftModemPh -+#include "SoftModem.h" -+#endif -+ -+#ifdef DSL_OS -+#include "DslOs.h" -+#endif -+ -+/* -+** -+** Type definitions -+** -+*/ -+ -+#if defined(ATM) || defined(DSL_PACKET) -+#define DSL_LINKLAYER -+#endif -+ -+#if defined(ATM_LAYER) || defined(DSL_PACKET_LAYER) || defined(G997_1_FRAMER) -+#define DSL_FRAME_FUNCTIONS -+#endif -+ -+#define FLD_OFFSET(type,fld) ((int)(void *)&(((type *)0)->fld)) -+ -+#include "Que.h" -+#include "SoftAtmVc.h" -+ -+typedef struct _dslFrameBuffer -+ { -+ struct _dslFrameBuffer *next; /* link to the next buffer in the frame */ -+ void *pData; /* pointer to data */ -+ ulong length; /* size (in bytes) of data */ -+ } dslFrameBuffer; -+ -+typedef struct _dslFrame -+ { -+ ulong Reserved[3]; -+ -+ ulong totalLength; /* total amount of data in the packet */ -+ int bufCnt; /* buffer counter */ -+ struct _dslFrameBuffer *head; /* first buffer in the chain */ -+ struct _dslFrameBuffer *tail; /* last buffer in the chain */ -+ } dslFrame; -+ -+ -+/* VC types and parameters */ -+ -+#define kDslVcAtm 1 -+ -+typedef struct -+ { -+ ulong vcType; -+ union -+ { -+ atmVcParams atmParams; -+ } params; -+ } dslVcParams; -+ -+/* -+** Assuming that dslVcParams.params is the first field in VC -+** and RefData is the first field in dslVcParams.params -+*/ -+ -+#define DslVcGetRefData(pVc) (*(void **) (pVc)) -+ -+/* Frame OOB types */ -+ -+#define kDslFrameAtm 1 -+ -+typedef struct -+ { -+ ulong frameType; -+ union -+ { -+ atmOobPacketInfo atmInfo; -+ } param; -+ } dslOobFrameInfo; -+ -+ -+typedef struct -+ { -+ ulong (SM_DECL *__DslFrameBufferGetLength) (dslFrameBuffer *fb); -+ void * (SM_DECL *__DslFrameBufferGetAddress) (dslFrameBuffer *fb); -+ void (SM_DECL *__DslFrameBufferSetLength) (dslFrameBuffer *fb, ulong l); -+ void (SM_DECL *__DslFrameBufferSetAddress) (dslFrameBuffer *fb, void *p); -+ -+ void (SM_DECL *__DslFrameInit) (dslFrame *f); -+ ulong (SM_DECL *__DslFrameGetLength) (dslFrame *pFrame); -+ ulong (SM_DECL *__DslFrameGetBufCnt) (dslFrame *pFrame); -+ dslFrameBuffer * (SM_DECL *__DslFrameGetFirstBuffer) (dslFrame *pFrame); -+ dslFrameBuffer * (SM_DECL *__DslFrameGetNextBuffer) (dslFrameBuffer *pFrBuffer); -+ void (SM_DECL *__DslFrameSetNextBuffer) (dslFrameBuffer *pFrBuf, dslFrameBuffer *pFrBufNext); -+ dslFrameBuffer * (SM_DECL *__DslFrameGetLastBuffer) (dslFrame *pFrame); -+ void * (SM_DECL *__DslFrameGetLinkFieldAddress) (dslFrame *f); -+ dslFrame * (SM_DECL *__DslFrameGetFrameAddressFromLink) (void *lnk); -+ -+ Boolean (SM_DECL *__DslFrameGetOobInfo) (dslFrame *f, dslOobFrameInfo *pOobInfo); -+ Boolean (SM_DECL *__DslFrameSetOobInfo) (dslFrame *f, dslOobFrameInfo *pOobInfo); -+ -+ void (SM_DECL *__DslFrameEnqueBufferAtBack) (dslFrame *f, dslFrameBuffer *b); -+ void (SM_DECL *__DslFrameEnqueFrameAtBack) (dslFrame *fMain, dslFrame *f); -+ void (SM_DECL *__DslFrameEnqueBufferAtFront) (dslFrame *f, dslFrameBuffer *b); -+ void (SM_DECL *__DslFrameEnqueFrameAtFront) (dslFrame *fMain, dslFrame *f); -+ dslFrameBuffer * (SM_DECL *__DslFrameDequeBuffer) (dslFrame *pFrame); -+ -+ void * (SM_DECL *__DslFrameAllocMemForFrames) (ulong frameNum); -+ void (SM_DECL *__DslFrameFreeMemForFrames) (void *hMem); -+ dslFrame * (SM_DECL *__DslFrameAllocFrame) (void *handle); -+ void (SM_DECL *__DslFrameFreeFrame) (void *handle, dslFrame *pFrame); -+ void * (SM_DECL *__DslFrameAllocMemForBuffers) (void **ppMemPool, ulong bufNum, ulong memSize); -+ void (SM_DECL *__DslFrameFreeMemForBuffers) (void *hMem, ulong memSize, void *pMemPool); -+ dslFrameBuffer * (SM_DECL *__DslFrameAllocBuffer) (void *handle, void *pMem, ulong length); -+ void (SM_DECL *__DslFrameFreeBuffer) (void *handle, dslFrameBuffer *pBuf); -+ -+ /* for LOG file support */ -+ -+ ulong (SM_DECL *__DslFrame2Id)(void *handle, dslFrame *pFrame); -+ void * (SM_DECL *__DslFrameId2Frame)(void *handle, ulong frameId); -+ } dslFrameFunctions; -+ -+#define DslFrameDeclareFunctions( name_prefix ) \ -+extern ulong SM_DECL name_prefix##BufferGetLength(dslFrameBuffer *fb); \ -+extern void * SM_DECL name_prefix##BufferGetAddress(dslFrameBuffer *fb); \ -+extern void SM_DECL name_prefix##BufferSetLength(dslFrameBuffer *fb, ulong l); \ -+extern void SM_DECL name_prefix##BufferSetAddress(dslFrameBuffer *fb, void *p); \ -+ \ -+extern void SM_DECL name_prefix##Init(dslFrame *f); \ -+extern ulong SM_DECL name_prefix##GetLength (dslFrame *pFrame); \ -+extern ulong SM_DECL name_prefix##GetBufCnt(dslFrame *pFrame); \ -+extern dslFrameBuffer * SM_DECL name_prefix##GetFirstBuffer(dslFrame *pFrame); \ -+extern dslFrameBuffer * SM_DECL name_prefix##GetNextBuffer(dslFrameBuffer *pFrBuffer); \ -+extern void SM_DECL name_prefix##SetNextBuffer(dslFrameBuffer *pFrBuf, dslFrameBuffer *pFrBufNext); \ -+extern dslFrameBuffer * SM_DECL name_prefix##GetLastBuffer(dslFrame *pFrame); \ -+extern void * SM_DECL name_prefix##GetLinkFieldAddress(dslFrame *f); \ -+extern Boolean SM_DECL name_prefix##GetOobInfo(dslFrame *f, dslOobFrameInfo *pOobInfo); \ -+extern Boolean SM_DECL name_prefix##SetOobInfo(dslFrame *f, dslOobFrameInfo *pOobInfo); \ -+extern dslFrame* SM_DECL name_prefix##GetFrameAddressFromLink(void *lnk); \ -+extern void SM_DECL name_prefix##EnqueBufferAtBack(dslFrame *f, dslFrameBuffer *b); \ -+extern void SM_DECL name_prefix##EnqueFrameAtBack(dslFrame *fMain, dslFrame *f); \ -+extern void SM_DECL name_prefix##EnqueBufferAtFront(dslFrame *f, dslFrameBuffer *b); \ -+extern void SM_DECL name_prefix##EnqueFrameAtFront(dslFrame *fMain, dslFrame *f); \ -+extern dslFrameBuffer * SM_DECL name_prefix##DequeBuffer(dslFrame *pFrame); \ -+ \ -+extern void * SM_DECL name_prefix##AllocMemForFrames(ulong frameNum); \ -+extern void SM_DECL name_prefix##FreeMemForFrames(void *hMem); \ -+extern dslFrame * SM_DECL name_prefix##AllocFrame(void *handle); \ -+extern void SM_DECL name_prefix##FreeFrame(void *handle, dslFrame *pFrame); \ -+extern void * SM_DECL name_prefix##AllocMemForBuffers(void **ppMemPool, ulong bufNum, ulong memSize); \ -+extern void SM_DECL name_prefix##FreeMemForBuffers(void *hMem, ulong memSize, void *pMemPool); \ -+extern dslFrameBuffer * SM_DECL name_prefix##AllocBuffer(void *handle, void *pMem, ulong length); \ -+extern void SM_DECL name_prefix##FreeBuffer(void *handle, dslFrameBuffer *pBuf); \ -+extern ulong SM_DECL name_prefix##2Id(void *handle, dslFrame *pFrame); \ -+extern void * SM_DECL name_prefix##Id2Frame(void *handle, ulong frameId); -+ -+ -+#define DslFrameAssignFunctions( var, name_prefix ) do { \ -+ (var).__DslFrameBufferGetLength = name_prefix##BufferGetLength; \ -+ (var).__DslFrameBufferGetAddress= name_prefix##BufferGetAddress; \ -+ (var).__DslFrameBufferSetLength = name_prefix##BufferSetLength; \ -+ (var).__DslFrameBufferSetAddress= name_prefix##BufferSetAddress; \ -+ \ -+ (var).__DslFrameInit = name_prefix##Init; \ -+ (var).__DslFrameGetLength = name_prefix##GetLength; \ -+ (var).__DslFrameGetBufCnt = name_prefix##GetBufCnt; \ -+ (var).__DslFrameGetFirstBuffer = name_prefix##GetFirstBuffer; \ -+ (var).__DslFrameGetNextBuffer = name_prefix##GetNextBuffer; \ -+ (var).__DslFrameSetNextBuffer = name_prefix##SetNextBuffer; \ -+ (var).__DslFrameGetLastBuffer = name_prefix##GetLastBuffer; \ -+ (var).__DslFrameGetLinkFieldAddress = name_prefix##GetLinkFieldAddress; \ -+ (var).__DslFrameGetFrameAddressFromLink = name_prefix##GetFrameAddressFromLink; \ -+ \ -+ (var).__DslFrameGetOobInfo = name_prefix##GetOobInfo; \ -+ (var).__DslFrameSetOobInfo = name_prefix##SetOobInfo; \ -+ \ -+ (var).__DslFrameEnqueBufferAtBack = name_prefix##EnqueBufferAtBack; \ -+ (var).__DslFrameEnqueFrameAtBack = name_prefix##EnqueFrameAtBack; \ -+ (var).__DslFrameEnqueBufferAtFront= name_prefix##EnqueBufferAtFront; \ -+ (var).__DslFrameEnqueFrameAtFront = name_prefix##EnqueFrameAtFront; \ -+ (var).__DslFrameDequeBuffer = name_prefix##DequeBuffer; \ -+ \ -+ (var).__DslFrameAllocMemForFrames = name_prefix##AllocMemForFrames; \ -+ (var).__DslFrameFreeMemForFrames = name_prefix##FreeMemForFrames; \ -+ (var).__DslFrameAllocFrame = name_prefix##AllocFrame; \ -+ (var).__DslFrameFreeFrame = name_prefix##FreeFrame; \ -+ (var).__DslFrameAllocMemForBuffers= name_prefix##AllocMemForBuffers; \ -+ (var).__DslFrameFreeMemForBuffers = name_prefix##FreeMemForBuffers; \ -+ (var).__DslFrameAllocBuffer = name_prefix##AllocBuffer; \ -+ (var).__DslFrameFreeBuffer = name_prefix##FreeBuffer; \ -+ \ -+ (var).__DslFrame2Id = name_prefix##2Id; \ -+ (var).__DslFrameId2Frame = name_prefix##Id2Frame; \ -+} while (0) -+ -+typedef struct -+ { -+ Boolean febe_I; -+ Boolean fecc_I; -+ Boolean los, rdi; -+ Boolean ncd_I; -+ Boolean hec_I; -+#ifdef G992P3 -+ Boolean lpr; -+#endif -+ -+#ifdef G992P1_NEWFRAME -+ -+ Boolean febe_F; -+ Boolean fecc_F; -+ Boolean ncd_F; -+ Boolean hec_F; -+ -+#endif -+ } G992MonitorParams; -+ -+typedef struct -+ { -+ ushort K; -+ uchar S, R; -+ uchar D; -+#ifdef G992P3 -+ uchar T, SEQ; -+#endif -+ directionType direction; -+ -+#ifdef G992P1_NEWFRAME -+ -+ ushort N; -+ ushort NF; -+ uchar RSF; -+ -+ uchar AS0BF, AS1BF, AS2BF, AS3BF, AEXAF; -+ ushort AS0BI; -+ uchar AS1BI, AS2BI, AS3BI, AEXAI; -+ -+ uchar LS0CF, LS1BF, LS2BF, LEXLF; -+ uchar LS0CI, LS1BI, LS2BI, LEXLI; -+ -+ uchar mergedModeEnabled; -+ -+#endif -+ -+ } G992CodingParams; -+ -+typedef struct -+ { -+ uchar Nlp; -+ uchar Nbc; -+ uchar MSGlp; -+ ushort MSGc; -+ -+ ulong L; -+ ushort M; -+ ushort T; -+ ushort D; -+ ushort R; -+ ushort B; -+ } G992p3CodingParams; -+ -+/* Power Management Message definitions (used in command and status) */ -+ -+typedef struct -+ { -+ long msgType; -+ union -+ { -+ long value; -+ struct -+ { -+ long msgLen; -+ void *msgData; -+ } msg; -+ } param; -+ } dslPwrMessage; -+ -+/* Power Management commands and responses */ -+ -+#define kPwrSimpleRequest 1 -+#define kPwrL2Request 2 -+#define kPwrL2TrimRequest 3 -+ -+#define kPwrGrant 0x80 -+#define kPwrReject 0x81 -+#define kPwrL2Grant 0x82 -+#define kPwrL2Reject 0x83 -+#define kPwrL2TrimGrant 0x84 -+#define kPwrL2TrimReject 0x85 -+#define kPwrL2Grant2p 0x86 -+ -+#define kPwrBusy 0x01 -+#define kPwrInvalid 0x02 -+#define kPwrNotDesired 0x03 -+#define kPwrInfeasibleParam 0x04 -+ -+/* Power Management reason codes */ -+ -+/* OLR definitions (used in command and status) */ -+ -+typedef struct -+ { -+ ushort msgType; -+ ushort nCarrs; -+ ushort L[4]; -+ uchar B[4]; -+ void *carrParamPtr; -+ } dslOLRMessage; -+ -+typedef struct -+ { -+ uchar ind; -+ uchar gain; -+ uchar gb; -+ } dslOLRCarrParam; -+ -+typedef struct -+ { -+ ushort ind; -+ uchar gain; -+ uchar gb; -+ } dslOLRCarrParam2p; -+ -+/* OLR messages */ -+ -+#define kOLRRequestType1 1 -+#define kOLRRequestType2 2 -+#define kOLRRequestType3 3 -+#define kOLRRequestType4 4 -+#define kOLRRequestType5 5 -+#define kOLRRequestType6 6 -+ -+#define kOLRDeferType1 0x81 -+#define kOLRRejectType2 0x82 -+#define kOLRRejectType3 0x83 -+ -+/* OLR reason codes */ -+ -+#define kOLRBusy 1 -+#define kOLRInvalidParam 2 -+#define kOLRNotEnabled 3 -+#define kOLRNotSupported 4 -+ -+/* common EOC definitions */ -+#define kG992EocStuffingByte 0x0C -+ -+/* showtime monitor counters */ -+#define kG992ShowtimeRSCodewordsRcved 0 /* number of Reed-Solomon codewords received */ -+#define kG992ShowtimeRSCodewordsRcvedOK 1 /* number of Reed-Solomon codewords received with all symdromes zero */ -+#define kG992ShowtimeRSCodewordsRcvedCorrectable 2 /* number of Reed-Solomon codewords received with correctable errors */ -+#define kG992ShowtimeRSCodewordsRcvedUncorrectable 3 /* number of Reed-Solomon codewords received with un-correctable errors */ -+#define kG992ShowtimeSuperFramesRcvd 4 /* number of super frames received */ -+#define kG992ShowtimeSuperFramesRcvdWrong 5 /* number of super frames received with CRC error */ -+#define kG992ShowtimeLastUncorrectableRSCount 6 /* last recorded value for kG992ShowtimeRSCodewordsRcvedUncorrectable */ -+#define kG992ShowtimeLastWrongSuperFrameCount 7 /* last recorded value for kG992ShowtimeSuperFramesRcvdWrong */ -+#define kG992ShowtimeNumOfShortResync 8 /* number of short interrupt recoveries by FEQ */ -+ -+#define kG992ShowtimeNumOfFEBE 9 /* number of other side superframe errors */ -+#define kG992ShowtimeNumOfFECC 10 /* number of other side superframe FEC errors */ -+#define kG992ShowtimeNumOfFHEC 11 /* number of far-end ATM header CRC errors */ -+#define kG992ShowtimeNumOfFOCD 12 /* number of far-end OCD events */ -+#define kG992ShowtimeNumOfFLCD 13 /* number of far-end LCD events */ -+#define kG992ShowtimeNumOfHEC 14 /* number of ATM header CRC errors */ -+#define kG992ShowtimeNumOfOCD 15 /* number of OCD events */ -+#define kG992ShowtimeNumOfLCD 16 /* number of LCD events */ -+ -+#define kG992ShowtimeNumOfMonitorCounters (kG992ShowtimeNumOfLCD+1) /* always last number + 1 */ -+#define kG992ShowtimeMonitorReportNumber 9 -+ -+#define kG992ShowtimeLCDNumShift 1 -+#define kG992ShowtimeLCDFlag 1 -+ -+typedef int (SM_DECL *dslFrameHandlerType) (void *gDslVars, void *pVc, ulong mid, dslFrame *); -+ -+typedef void* (SM_DECL *dslHeaderHandlerType) (void *gDslVars, ulong hdr, uchar hdrHec); -+typedef void* (SM_DECL *dslTxFrameBufferHandlerType) (void *gDslVars, int*, void*); -+typedef void* (SM_DECL *dslRxFrameBufferHandlerType) (void *gDslVars, int, void*); -+ -+typedef void* (SM_DECL *dslVcAllocateHandlerType) (void *gDslVars, void *); -+typedef void (SM_DECL *dslVcFreeHandlerType) (void *gDslVars, void *); -+typedef Boolean (SM_DECL *dslVcActivateHandlerType) (void *gDslVars, void *); -+typedef void (SM_DECL *dslVcDeactivateHandlerType) (void *gDslVars, void *); -+typedef Boolean (SM_DECL *dslVcConfigureHandlerType) (void *gDslVars, void *pVc, ulong mid, void *); -+ -+typedef ulong (SM_DECL *dslLinkVc2IdHandlerType) (void *gDslVars, void *); -+typedef void* (SM_DECL *dslLinkVcId2VcHandlerType) (void *gDslVars, ulong); -+typedef void* (SM_DECL *dslGetFramePoolHandlerType) (void *gDslVars); -+ -+typedef void (SM_DECL *dslLinkCloseHandlerType) (void *gDslVars); -+typedef int (SM_DECL *dslTxDataHandlerType)(void *gDslVars, int, int, uchar*, G992MonitorParams*); -+typedef int (SM_DECL *dslRxDataHandlerType)(void *gDslVars, int, uchar*, G992MonitorParams*); -+ -+typedef void (SM_DECL *dslLinkStatusHandler) (void *gDslVars, ulong statusCode, ...); -+ -+typedef Boolean (SM_DECL *dslPhyInitType) ( -+ void *gDslVars, -+ bitMap setupMap, -+ dslHeaderHandlerType rxCellHeaderHandlerPtr, -+ dslRxFrameBufferHandlerType rxFrameHandlerPtr, -+ dslTxFrameBufferHandlerType txFrameHandlerPtr, -+ atmStatusHandler statusHandlerPtr); -+ -+struct _dslFramerBufDesc; -+ -+typedef Boolean (SM_DECL *dslFramerDataGetPtrHandlerType) (void *gDslVars, struct _dslFramerBufDesc *pBufDesc); -+typedef void (SM_DECL *dslFramerDataDoneHandlerType) (void *gDslVars, struct _dslFramerBufDesc *pBufDesc); -+ -+typedef void (SM_DECL *dslDriverCallbackType) (void *gDslVars); -+ -+#ifdef DSL_PACKET -+ -+typedef struct -+ { -+ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler; -+ dslFramerDataDoneHandlerType rxDataDoneHandler; -+ dslFramerDataGetPtrHandlerType txDataGetPtrHandler; -+ dslFramerDataDoneHandlerType txDataDoneHandler; -+ } dslPacketPhyFunctions; -+ -+typedef Boolean (SM_DECL *dslPacketPhyInitType) ( -+ void *gDslVars, -+ bitMap setupMap, -+ dslPacketPhyFunctions dslPhyFunctions, -+ dslLinkStatusHandler statusHandlerPtr); -+ -+ -+#endif /* DSL_PACKET */ -+ -+ -+typedef int dslDirectionType; -+typedef bitMap dslModulationType; -+typedef bitMap dslLinkLayerType; -+ -+/* -+** -+** Log data codes -+** -+*/ -+ -+#define kDslEyeData eyeData -+ -+#define kDslLogComplete (inputSignalData - 1) -+#define kDslLogInputData inputSignalData -+#define kDslLogInputData1 (inputSignalData + 1) -+#define kDslLogInputData2 (inputSignalData + 2) -+#define kDslLogInputData3 (inputSignalData + 3) -+ -+/* -+** -+** Status codes -+** -+*/ -+ -+typedef long dslStatusCode; -+#define kFirstDslStatusCode 256 -+#define kDslError (kFirstDslStatusCode + 0) -+#define kAtmStatus (kFirstDslStatusCode + 1) -+#define kDslTrainingStatus (kFirstDslStatusCode + 2) -+#define kDslConnectInfoStatus (kFirstDslStatusCode + 3) -+#define kDslEscapeToG994p1Status (kFirstDslStatusCode + 4) -+#define kDslFrameStatus (kFirstDslStatusCode + 5) -+#define kDslReceivedEocCommand (kFirstDslStatusCode + 6) -+#define kDslSendEocCommandDone (kFirstDslStatusCode + 7) -+#define kDslSendEocCommandFailed (kFirstDslStatusCode + 8) -+#define kDslWriteRemoteRegisterDone (kFirstDslStatusCode + 9) -+#define kDslReadRemoteRegisterDone (kFirstDslStatusCode + 10) -+#define kDslExternalError (kFirstDslStatusCode + 11) -+#define kDslDspControlStatus (kFirstDslStatusCode + 12) -+#define kDslATUHardwareAGCRequest (kFirstDslStatusCode + 13) -+#define kDslPacketStatus (kFirstDslStatusCode + 14) -+#define kDslG997Status (kFirstDslStatusCode + 15) -+#define kDslPrintfStatus (kFirstDslStatusCode + 16) -+#define kDslPrintfStatus1 (kFirstDslStatusCode + 17) -+#define kDslExceptionStatus (kFirstDslStatusCode + 18) -+#define kDslPingResponse (kFirstDslStatusCode + 19) -+#define kDslShowtimeSNRMarginInfo (kFirstDslStatusCode + 20) -+#define kDslGetOemParameter (kFirstDslStatusCode + 21) -+#define kDslOemDataAddrStatus (kFirstDslStatusCode + 22) -+#define kDslDataAvailStatus (kFirstDslStatusCode + 23) -+/* #define kDslAtuChangeTxFilterRequest (kFirstDslStatusCode + 24) */ -+#define kDslTestPllPhaseResult (kFirstDslStatusCode + 25) -+#ifdef BCM6348_SRC -+#define kDslHardwareAGCSetPga1 (kFirstDslStatusCode + 26) -+#define kDslHardwareAGCDecPga1 (kFirstDslStatusCode + 27) -+#define kDslHardwareAGCIncPga1 (kFirstDslStatusCode + 28) -+#define kDslHardwareAGCSetPga2Delta (kFirstDslStatusCode + 29) -+#endif -+#define kDslOLRRequestStatus (kFirstDslStatusCode + 30) -+#define kDslOLRResponseStatus (kFirstDslStatusCode + 31) -+#define kDslOLRBitGainUpdateStatus (kFirstDslStatusCode + 32) -+#define kDslPwrMgrStatus (kFirstDslStatusCode + 33) -+#define kDslEscapeToT1p413Status (kFirstDslStatusCode + 34) -+#ifdef BCM6348_SRC -+#define kDslHardwareAGCSetPga2 (kFirstDslStatusCode + 35) -+#define kDslHardwareGetRcvAGC (kFirstDslStatusCode + 36) -+#endif -+#define kDslUpdateXmtReadPtr (kFirstDslStatusCode + 37) -+#define kDslHardwareSetRcvAGC (kFirstDslStatusCode + 38) -+#ifdef BCM6348_SRC -+#define kDslSetDigUsPwrCutback (kFirstDslStatusCode + 39) -+#endif -+ -+#define kClientSideInitiation 0 -+#define kClientSideRespond 1 -+#define kCentralSideInitiation 2 -+#define kCentralSideRespond 3 -+ -+/* OEM parameter ID definition */ -+ -+#define kDslOemG994VendorId 1 -+#define kDslOemG994XmtNSInfo 2 -+#define kDslOemG994RcvNSInfo 3 -+#define kDslOemEocVendorId 4 -+#define kDslOemEocVersion 5 -+#define kDslOemEocSerNum 6 -+#define kDslOemT1413VendorId 7 -+#define kDslOemT1413EocVendorId 8 -+ -+typedef long dslErrorCode; -+ -+typedef long atmStatusCode; -+typedef long dslFramerStatusCode; -+ -+typedef long atmErrorCode; -+ -+typedef long dslTrainingStatusCode; -+ -+#define kDslStartedG994p1 0 -+#define kDslStartedT1p413HS 1 -+ -+/* reserved for G.994.1: 1 ~ 8 */ -+ -+#define kDslG994p1MessageDet 100 -+#define kDslG994p1ToneDet 101 -+#define kDslG994p1RToneDet 102 -+#define kDslG994p1FlagDet 103 -+#define kDslG994p1GalfDet 104 -+#define kDslG994p1ErrorFrameDet 105 -+#define kDslG994p1BadFrameDet 106 -+#define kDslG994p1SilenceDet 107 -+#define kDslG994p1RcvTimeout 108 -+#define kDslG994p1XmtFinished 109 -+#define kDslG994p1ReturntoStartup 110 -+#define kDslG994p1InitiateCleardown 111 -+#define kDslG994p1StartupFinished 112 -+#define kDslG994p1RcvNonStandardInfo 113 -+#define kDslG994p1XmtNonStandardInfo 114 -+ -+#define kG994p1MaxNonstdMessageLength 64 -+ -+#define kDslFinishedT1p413 1100 -+#define kDslT1p413DetectedCTone 1101 -+#define kDslT1p413DetectedCAct 1102 -+#define kDslT1p413DetectedCReveille 1103 -+#define kDslT1p413DetectedRActReq 1104 -+#define kDslT1p413DetectedRQuiet1 1105 -+#define kDslT1p413DetectedRAct 1106 -+#define kDslT1p413TimeoutCReveille 1107 -+#define kDslT1p413ReturntoStartup 1108 -+ -+#define kDslG994p1Timeout 8 -+#define kDslFinishedG994p1 9 -+#define kDslStartedG992p2Training 10 -+#define kDslG992p2DetectedPilotSymbol 11 -+#define kDslG992p2DetectedReverbSymbol 12 -+#define kDslG992p2TEQCalculationDone 13 -+#define kDslG992p2TrainingFEQ 14 -+#define kDslG992p2Phase3Started 15 -+#define kDslG992p2ReceivedRates1 16 -+#define kDslG992p2ReceivedMsg1 17 -+#define kDslG992p2Phase4Started 18 -+#define kDslG992p2ReceivedRatesRA 19 -+#define kDslG992p2ReceivedMsgRA 20 -+#define kDslG992p2ReceivedRates2 21 -+#define kDslG992p2ReceivedMsg2 22 -+#define kDslG992p2ReceivedBitGainTable 23 -+#define kDslG992p2TxShowtimeActive 24 -+#define kDslG992p2RxShowtimeActive 25 -+#define kDslG992p2TxAocMessage 26 -+#define kDslG992p2RxAocMessage 27 -+#define kDslG992p2TxEocMessage 28 -+#define kDslG992p2RxEocMessage 29 -+#define kDslFinishedG992p2Training 30 -+#define kDslRecoveredFromImpulseNoise 31 -+#define kDslG992Timeout 32 -+#define kDslT1p413Isu1SglByteSymDetected 33 /* detected T1.413 Issue 1 single byte per symbol mode */ -+#define kDslG992RxPrefixOnInAFewSymbols 34 -+#define kDslG992TxPrefixOnInAFewSymbols 35 -+#define kDslAnnexCXmtCPilot1Starting 36 -+#define kDslXmtToRcvPathDelay 37 -+#define kDslFeaturesUnsupported 38 -+#define kDslG992RcvMsgCrcError 39 -+#define kDslAnnexCDetectedStartHyperframe 40 -+ -+#define kDslG992AnnexCTimeoutCPilot1Detection 41 -+#define kDslG992AnnexCTimeoutCReverb1Detection 42 -+#define kDslG992AnnexCTimeoutECTraining 43 -+#define kDslG992AnnexCTimeoutHyperframeDetector 44 -+#define kDslG992AnnexCTimeoutSendRSegue2 45 -+#define kDslG992AnnexCTimeoutDetectCSegue1 46 -+#define kDslG992AnnexCAlignmentErrDetected 47 -+#define kDslG992AnnexCTimeoutSendRSegueRA 48 -+#define kDslG992AnnexCTimeoutSendRSegue4 49 -+#define kDslG992AnnexCTimeoutCSegue2Detection 50 -+#define kDslG992AnnexCTimeoutCSegue3Detection 51 -+/* Progress report for fast retrain */ -+ -+#define kG994p1EventToneDetected 54 -+#define kDslG992p2RcvVerifiedBitAndGain 55 -+#define kDslG992p2ProfileChannelResponseCalc 56 -+#define kDslG992AnnexCTotalFEXTBits 57 -+#define kDslG992AnnexCTotalNEXTBits 58 -+#define kDslG992AnnexCTotalFEXTCarrs 59 -+#define kDslG992AnnexCTotalNEXTCarrs 60 -+ -+#define kDslG992p3ReceivedMsgFmt 61 -+#define kDslG992p3ReceivedMsgPcb 62 -+ -+#define kDslG992p3AnnexLMode 63 -+ -+/* performance monitoring report */ -+ -+#define kG992DataRcvDetectFastRSCorrection 70 -+#define kG992DataRcvDetectInterleaveRSCorrection 71 -+#define kG992DataRcvDetectFastCRCError 72 -+#define kG992DataRcvDetectInterleaveCRCError 73 -+#define kG992DataRcvDetectFastRSError 74 -+#define kG992DataRcvDetectInterleaveRSError 75 -+#define kG992DataRcvDetectLOS 76 -+#define kG992DecoderDetectRDI 77 -+#define kG992DataRcvDetectLOSRecovery 78 -+#define kG992AtmDetectHEC 79 -+#define kG992AtmDetectOCD 180 -+#define kG992AtmDetectCD 181 -+#define kG992DecoderDetectRemoteLOS 182 -+#define kG992DecoderDetectRemoteLOSRecovery 183 -+#define kG992DecoderDetectRemoteRDI 184 -+#define kG992DecoderDetectRemoteRDIRecovery 185 -+#define kG992RcvDetectSyncSymbolOffset 186 -+#define kG992Upstream2xIfftDisabled 187 -+#if defined(G992P5) -+#define kDslG992RunAnnexaP3ModeInAnnexaP5 188 /* run Annex C mode in Annex I compiled codes */ -+#else -+#define kDslG992RunAnnexCModeInAnnexI 188 /* run Annex C mode in Annex I compiled codes */ -+#endif -+ -+/* OLR PHY status */ -+ -+#define kG992EventSynchSymbolDetected 189 -+#define kG992EventReverseSynchSymbolDetected 190 -+#define kG992EventL2CReverbSymbolDetected 191 -+#define kG992EventL2CSegueSymbolDetected 192 -+ -+/* ANNEX_M */ -+#define kG992EnableAnnexM 191 -+ -+#define kDslAtuChangeTxFilterRequest 192 -+ -+/* detailed error messages reports */ -+ -+#define kDslG992XmtRReverbRAOver4000 80 -+#define kDslG992XmtRReverb5Over4000 81 -+#define kDslG992RcvCSegue2Failed 82 -+#define kDslG992RcvCSegueRAFailed 83 -+#define kDslG992RcvCSegue3Failed 84 -+#define kDslG992RcvShowtimeStartedTooLate 85 -+#define kDslG992XmtRReverb3Over4000 86 -+#define kDslG992RcvFailDetCSegue1InWindow 87 -+#define kDslG992RcvCPilot1Failed 88 -+#define kDslG992RcvCReverb1Failed 89 -+#define kG992ControlAllRateOptionsFailedErr 90 -+#define kG992ControlInvalidRateOptionErr 91 -+#define kDslG992XmtInvalidXmtDErr 92 -+#define kDslG992BitAndGainCalcFailed 93 -+#define kDslG992BitAndGainVerifyFailed 94 -+ -+#define kDslT1p413RetrainToUseCorrectRAck 95 -+#define kDslUseAlternateTxFilter 96 -+#define kDslT1p413RetrainToUseCorrectIFFT 97 -+ -+typedef long dslConnectInfoStatusCode; -+#define kG992p2XmtToneOrderingInfo 0 -+#define kG992p2RcvToneOrderingInfo 1 -+#define kG992p2XmtCodingParamsInfo 2 -+#define kG992p2RcvCodingParamsInfo 3 -+#define kG992p2TrainingRcvCarrEdgeInfo 4 -+#define kG992ShowtimeMonitoringStatus 5 -+#define kG992MessageExchangeRcvInfo 6 -+#define kG992MessageExchangeXmtInfo 7 -+#define kG994MessageExchangeRcvInfo 8 -+#define kG994MessageExchangeXmtInfo 9 -+ -+#define kDslATURClockErrorInfo 10 -+#define kDslATURcvPowerInfo 11 -+#define kDslATUAvgLoopAttenuationInfo 12 -+#define kDslHWTimeTrackingResetClockError 13 -+#define kDslHWTimeTrackingClockTweak 14 -+#define kDslATUHardwareAGCObtained 15 -+#define kDslTEQCoefInfo 16 -+#define kDslRcvCarrierSNRInfo 17 -+#define kDslMaxReceivableBitRateInfo 18 -+#define kDslHWSetDigitalEcUpdateMode 19 -+#define kDslHWEnableDigitalECUpdate 20 -+#define kDslHWDisableDigitalECUpdate 21 -+#define kDslHWEnableDigitalEC 22 -+#define kDslHWSetDigitalEcGainShift 23 -+#define kDslHWSetDigitalEcUpdateShift 24 -+#define kDslRcvPsdInfo 25 -+#define kDslHWdcOffsetInfo 26 -+#define kG994SelectedG994p1CarrierIndex 27 -+#define kDslSelectedTimingTone 28 -+ -+#define kDslHWEnableAnalogECUpdate kDslHWSetDigitalEcUpdateMode -+#define kDslHWEnableAnalogEC kDslHWDisableDigitalECUpdate -+ -+#define kG992AocMessageExchangeRcvInfo 29 -+#define kG992AocMessageExchangeXmtInfo 30 -+#define kG992AocBitswapTxStarted 31 -+#define kG992AocBitswapRxStarted 32 -+#define kG992AocBitswapTxCompleted 33 -+#define kG992AocBitswapRxCompleted 34 -+#define kDslChannelResponseLog 35 -+#define kDslChannelResponseLinear 36 -+#define kDslChannelQuietLineNoise 37 -+ -+#define kDslATUCXmtPowerCutbackInfo 40 -+#define kDslATURXmtPowerCutbackInfo 41 -+#define kDslATUCXmtPowerInfo 42 -+#define kDslATURXmtPowerInfo 43 -+ -+#define kDslFramingModeInfo 50 -+#define kDslG992VendorID 51 -+ -+#ifdef BCM6348_SRC -+#define kDslHWSetRcvFir2OutputScale 52 -+#endif -+ -+#define kDslSignalAttenuation 53 -+#define kDslAttainableNetDataRate 54 -+#define kDslHLinScale 55 -+ -+#define kG992p3XmtCodingParamsInfo 60 -+#define kG992p3RcvCodingParamsInfo 61 -+#define kG992p3PwrStateInfo 62 -+#define kG992PilotToneInfo 63 -+ -+#define kDslSetPilotEyeDisplay 64 -+ -+#define kDslAturHwAgcResolutionMask (0xFFFFFFF8) -+#define kDslAturHwAgcMinGain ((-12)<<4) -+#ifndef BCM6348_SRC -+#define kDslAturHwAgcMaxGain (30<<4) -+#else -+#define kDslAturHwAgcMaxGain (36<<4) -+#endif -+ -+#define kDslFrameStatusSend 1 -+#define kDslFrameStatusSendComplete 2 -+#define kDslFrameStatusRcv 3 -+#define kDslFrameStatusReturn 4 -+ -+typedef struct _dslFramerStatus -+ { -+ dslFramerStatusCode code; -+ union -+ { -+ long value; -+ dslErrorCode error; -+ struct -+ { -+ long length; -+ uchar *framePtr; -+ } frame; -+ struct -+ { -+ long nRxFrameTotal; -+ long nRxFrameError; -+ long nTxFrameTotal; -+ } statistic; -+ } param; -+ } dslFramerStatus; -+ -+typedef struct -+ { -+ dslStatusCode code; -+ union -+ { -+ long value; -+ dslErrorCode error; -+ struct -+ { -+ atmStatusCode code; -+ union -+ { -+ long value; -+ dslErrorCode error; -+ struct -+ { -+ long vci; -+ long mid; -+ long aalType; -+ long length; -+ uchar *framePtr; -+ } frame; -+ struct -+ { -+ long nFrames; -+ long nFrameErrors; -+ } statistic; -+ struct -+ { -+ long vcId; -+ long vci; -+ long aalType; -+ ulong fwdPeakCellTime; -+ ulong backPeakCellTime; -+ } vcInfo; -+ struct -+ { -+ long cellHdr; -+ long oamCmd; -+ } oamInfo; -+ struct -+ { -+ void *pVc; -+ char *pHdr; -+ void *cellHdr; -+ void *cellData; -+ } cellInfo; -+ struct -+ { -+ long totalBits; -+ long errBits; -+ } bertInfo; -+ } param; -+ } atmStatus; -+#ifdef DSL_PACKET -+ dslFramerStatus dslPacketStatus; -+#endif -+#ifdef G997_1_FRAMER -+ dslFramerStatus g997Status; -+#endif -+ struct -+ { -+ dslTrainingStatusCode code; -+ long value; -+ } dslTrainingInfo; -+ struct -+ { -+ dslConnectInfoStatusCode code; -+ long value; -+ void *buffPtr; -+ } dslConnectInfo; -+ struct -+ { -+ long maxMarginCarrier; -+ long maxSNRMargin; -+ long minMarginCarrier; -+ long minSNRMargin; -+ long avgSNRMargin; -+ long nCarriers; -+ void *buffPtr; -+ } dslShowtimeSNRMarginInfo; -+ struct -+ { -+ long code; -+ long vcId; -+ long timeStamp; -+ } dslFrameInfo; -+#ifdef G997_1 -+ struct -+ { -+ long msgId; -+ long msgType; -+ char *dataPtr; -+ } dslClearEocMsg; -+#endif -+ struct -+ { -+ char *fmt; -+ long argNum; -+ void *argPtr; -+ } dslPrintfMsg; -+ struct -+ { -+ ulong nBits; -+ ulong nBlocks; -+ ulong nBitErrors; -+ ulong nBlockErrors; -+ -+ ulong nAudioBits; -+ ulong nAudioBlocks; -+ ulong nAudioSyncErrors; -+ ulong nAudioBlockErrors; -+ } testResults; -+ struct -+ { -+ ulong code; -+ uchar *valuePtr; -+ ulong length; -+ } dslDataRegister; -+ struct -+ { -+ ulong code; -+ char *desc; -+ } dslExternalError; -+ struct -+ { -+ ulong numberOfCalls; -+ ulong txSignalChecksum; -+ ulong rxSignalChecksum; -+ ulong eyeDataChecksum; -+ } checksums; -+ struct -+ { -+ int sp; -+ int argc; -+ int *argv; -+ int *stackPtr; -+ int stackLen; -+ } dslException; -+ struct -+ { -+ ulong paramId; -+ void *dataPtr; -+ ulong dataLen; -+ } dslOemParameter; -+ struct -+ { -+ void *dataPtr; -+ ulong dataLen; -+ } dslDataAvail; -+ dslOLRMessage dslOLRRequest; -+ dslPwrMessage dslPwrMsg; -+ } param; -+ } dslStatusStruct; -+ -+typedef void (SM_DECL *dslStatusHandlerType) (void *gDslVars, dslStatusStruct*); -+ -+ -+/* -+** -+** Command codes -+** -+*/ -+ -+typedef long dslCommandCode; -+#define kFirstDslCommandCode 256 -+#define kDslIdleCmd (kFirstDslCommandCode + 0) -+#define kDslIdleRcvCmd (kFirstDslCommandCode + 1) -+#define kDslIdleXmtCmd (kFirstDslCommandCode + 2) -+#define kDslStartPhysicalLayerCmd (kFirstDslCommandCode + 3) -+#define kDslStartRetrainCmd (kFirstDslCommandCode + 4) -+#define kDslSetFrameFunctions (kFirstDslCommandCode + 5) -+#define kDslSendEocCommand (kFirstDslCommandCode + 6) -+#define kDslWriteRemoteRegister (kFirstDslCommandCode + 7) -+#define kDslReadRemoteRegister (kFirstDslCommandCode + 8) -+#define kDslWriteLocalRegister (kFirstDslCommandCode + 9) -+#define kDslReadLocalRegister (kFirstDslCommandCode + 10) -+#define kDslStoreHardwareAGCCmd (kFirstDslCommandCode + 11) -+#define kDslSetCommandHandlerCmd (kFirstDslCommandCode + 12) -+#define kSetLinkLayerStatusHandlerCmd (kFirstDslCommandCode + 13) -+#define kDslSetG997Cmd (kFirstDslCommandCode + 14) -+#define kDslLoopbackCmd (kFirstDslCommandCode + 15) -+#define kDslDiagSetupCmd (kFirstDslCommandCode + 16) -+#define kDslSetDriverCallbackCmd (kFirstDslCommandCode + 17) -+#define kDslDiagStopLogCmd (kFirstDslCommandCode + 18) -+#define kDslDiagStartBERT (kFirstDslCommandCode + 19) -+#define kDslDiagStopBERT (kFirstDslCommandCode + 20) -+#define kDslPingCmd (kFirstDslCommandCode + 21) -+#define kDslDyingGaspCmd (kFirstDslCommandCode + 22) -+#define kDslTestCmd (kFirstDslCommandCode + 23) -+#define kDslFilterSNRMarginCmd (kFirstDslCommandCode + 24) -+#define kDslAtmVcMapTableChanged (kFirstDslCommandCode + 25) -+#define kDslGetOemDataAddrCmd (kFirstDslCommandCode + 26) -+#define kDslAtmReportHEC (kFirstDslCommandCode + 27) -+#define kDslAtmReportCD (kFirstDslCommandCode + 28) -+#define kDslSetXmtGainCmd (kFirstDslCommandCode + 29) -+#define kDslSetStatusBufferCmd (kFirstDslCommandCode + 30) -+#define kDslAfeTestCmd (kFirstDslCommandCode + 31) -+#define kDslI432ResetCmd (kFirstDslCommandCode + 32) -+#define kDslSetRcvGainCmd (kFirstDslCommandCode + 33) -+#define kDslBypassRcvHpfCmd (kFirstDslCommandCode + 34) -+#define kDslWriteAfeRegCmd (kFirstDslCommandCode + 35) -+#define kDslReadAfeRegCmd (kFirstDslCommandCode + 36) -+#define kDslOLRRequestCmd (kFirstDslCommandCode + 37) -+#define kDslOLRResponseCmd (kFirstDslCommandCode + 38) -+#define kDslI432SetScrambleCmd (kFirstDslCommandCode + 39) -+#define kDslPwrMgrCmd (kFirstDslCommandCode + 40) -+#define kDslAtmGfcMappingCmd (kFirstDslCommandCode + 41) -+ -+#ifdef BCM6348_SRC -+#define kDslEnablePwmSyncClk (kFirstDslCommandCode + 42) -+#define kDslSetPwmSyncClkFreq (kFirstDslCommandCode + 43) -+#endif -+ -+#define kG994p1Duplex 1 -+#define kG994p1HalfDuplex 2 -+ -+/* Eoc Messages from ATU-C to ATU-R */ -+#define kDslEocHoldStateCmd 1 -+#define kDslEocReturnToNormalCmd 2 -+#define kDslEocPerformSelfTestCmd 3 -+#define kDslEocRequestCorruptCRCCmd 4 -+#define kDslEocRequestEndCorruptCRCCmd 5 -+#define kDslEocNotifyCorruptCRCCmd 6 -+#define kDslEocNotifyEndCorruptCRCCmd 7 -+#define kDslEocRequestTestParametersUpdateCmd 8 -+#define kDslEocGrantPowerDownCmd 9 -+#define kDslEocRejectPowerDownCmd 10 -+ -+/* Eoc Messages from ATU-R to ATU-C */ -+#define kDslEocRequestPowerDownCmd 11 -+#define kDslEocDyingGaspCmd 12 -+ -+/* Clear Eoc Messages */ -+#define kDslClearEocFirstCmd 100 -+#define kDslClearEocSendFrame 100 -+#define kDslClearEocSendComplete 101 -+#define kDslClearEocRcvedFrame 102 -+#define kDslClearEocSendComplete2 103 -+ -+#define kDslClearEocMsgLengthMask 0xFFFF -+#define kDslClearEocMsgNumMask 0xFF0000 -+#define kDslClearEocMsgDataVolatileMask 0x1000000 -+#define kDslClearEocMsgDataVolatile kDslClearEocMsgDataVolatileMask -+#define kDslClearEocMsgExtraSendComplete 0x2000000 -+ -+/* ADSL Link Power States */ -+#define kDslPowerFullOn 0 -+#define kDslPowerLow 1 -+#define kDslPowerIdle 3 -+ -+/* ATU-R Data Registers */ -+#define kDslVendorIDRegister 1 -+#define kDslRevisionNumberRegister 2 -+#define kDslSerialNumberRegister 3 -+#define kDslSelfTestResultsRegister 4 -+#define kDslLineAttenuationRegister 5 -+#define kDslSnrMarginRegister 6 -+#define kDslAturConfigurationRegister 7 -+#define kDslLinkStateRegister 8 -+ -+#define kDslVendorIDRegisterLength 8 -+#define kDslRevisionNumberRegisterLength 32 -+#define kDslSerialNumberRegisterLength 32 -+#define kDslSelfTestResultsRegisterLength 1 -+#define kDslLineAttenuationRegisterLength 1 -+#define kDslSnrMarginRegisterLength 1 -+#define kDslAturConfigurationRegisterLength 30 -+#define kDslLinkStateRegisterLength 1 -+ -+/* Dsl Diags setup flags */ -+#define kDslDiagEnableEyeData 1 -+#define kDslDiagEnableLogData 2 -+ -+/* Dsl test commands */ -+typedef long dslTestCmdType; -+#define kDslTestBackToNormal 0 -+#define kDslTestReverb 1 -+#define kDslTestMedley 2 -+#define kDslTestToneSelection 3 -+#define kDslTestNoAutoRetrain 4 -+#define kDslTestMarginTweak 5 -+#define kDslTestEstimatePllPhase 6 -+#define kDslTestReportPllPhaseStatus 7 -+#define kDslTestAfeLoopback 8 -+#define kDslTestL3 9 -+#define kDslTestAdsl2DiagMode 10 -+#define kDslTestRetL0 11 -+ -+/* Xmt gain default setting */ -+#define kDslXmtGainAuto 0x80000000 -+ -+/* Unit (AFE) test commands */ -+#define kDslAfeTestLoadImage 0 -+#define kDslAfeTestPatternSend 1 -+#define kDslAfeTestLoadImageOnly 2 -+#define kDslAfeTestPhyRun 3 -+#define kDslAfeTestLoadBuffer 4 -+ -+typedef struct -+ { -+#if defined(G992P1_ANNEX_I) || defined(G992P5) -+ ushort downstreamMinCarr, downstreamMaxCarr; -+#else -+ uchar downstreamMinCarr, downstreamMaxCarr; -+#endif -+ uchar upstreamMinCarr, upstreamMaxCarr; -+ }carrierInfo; -+ -+#if defined(G992P3) && !defined(BCM6348_SRC) -+#define FAST_TEXT_TYPE -+#else -+#define FAST_TEXT_TYPE FAST_TEXT -+#endif -+ -+#if defined(BCM6348_SRC) -+#define BCM6348_TEMP_MOVE_TO_LMEM -+#else -+#define BCM6348_TEMP_MOVE_TO_LMEM -+#endif -+ -+#ifdef G992P3 -+#define PRINT_DEBUG_INFO -+#else -+#define PRINT_DEBUG_INFO -+#endif -+ -+#ifdef G992P3 -+ -+#define kG992p3MaxSpectBoundsUpSize 16 -+#define kG992p3MaxSpectBoundsDownSize 16 -+ -+/* G.994 definitions */ -+ -+/*** Standard Info SPar2: G.992.3 Annex A Octet 1 ***/ -+ -+#define kG994p1G992p3AnnexASpectrumBoundsUpstream 0x01 -+#define kG994p1G992p3AnnexASpectrumShapingUpstream 0x02 -+#define kG994p1G992p3AnnexASpectrumBoundsDownstream 0x04 -+#define kG994p1G992p3AnnexASpectrumShapingDownstream 0x08 -+#define kG994p1G992p3AnnexATxImageAboveNyquistFreq 0x10 -+#define kG994p1G992p3AnnexLReachExtended 0x20 -+#define kG994p1G992p3AnnexMSubModePSDMasks 0x20 -+ -+#define kG994p1G992p3AnnexLUpNarrowband 0x02 -+#define kG994p1G992p3AnnexLUpWideband 0x01 -+#define kG994p1G992p3AnnexLDownNonoverlap 0x01 -+ -+/*** Standard Info SPar2: G.992.3 Annex A Octet 2 ***/ -+ -+#define kG994p1G992p3AnnexADownOverheadDataRate 0x01 -+#define kG994p1G992p3AnnexAUpOverheadDataRate 0x02 -+#define kG994p1G992p3AnnexAMaxNumberDownTPSTC 0x04 -+#define kG994p1G992p3AnnexAMaxNumberUpTPSTC 0x08 -+ -+/*** Standard Info SPar2: G.992.3 Annex A Octet 3,5,7,9 ***/ -+ -+#define kG994p1G992p3AnnexADownSTM_TPS_TC 0x01 -+#define kG994p1G992p3AnnexAUpSTM_TPS_TC 0x02 -+#define kG994p1G992p3AnnexADownATM_TPS_TC 0x04 -+#define kG994p1G992p3AnnexAUpATM_TPS_TC 0x08 -+#define kG994p1G992p3AnnexADownPTM_TPS_TC 0x10 -+#define kG994p1G992p3AnnexAUpPTM_TPS_TC 0x20 -+ -+/*** Standard Info SPar2: G.992.3 Annex A Octet 4,6,8,10 ***/ -+ -+#define kG994p1G992p3AnnexADownPMS_TC_Latency 0x01 -+#define kG994p1G992p3AnnexAUpPMS_TC_Latency 0x02 -+ -+/*** -+ * TSSI -+ * -+ * TSSI information is specified in 2 parts: subcarrier index, -+ * tssi value, and an indication of whether or no the tone specified -+ * is part of the supported set. -+ * -+ * The subcarrier index information is currently stored in the -+ * dsSubcarrierIndex array defined below. The tssi value are stored -+ * in the dsLog_tss array. -+ * -+ * The subcarrier index information only occupies the lower 12 bits -+ * of the available 16 bits (short type). Therefore, we will pack the -+ * supported set information in bit 15. -+ */ -+#define kG992DsSubCarrierIndexMask (0x0fff) /* AND mask to ectract ds subcarrier index */ -+#define kG992DsSubCarrierSuppSetMask (0x8000) /* AND mask to extract supported set indication */ -+ -+#define G992GetDsSubCarrierIndex(arg) ((arg) & kG992DsSubCarrierIndexMask) -+#define G992GetDsSubCarrierSuppSetIndication(arg) (((arg) & kG992DsSubCarrierSuppSetMask) >> 15) -+ -+/* Caution: Do not change anything in this structure definition, including associated constant */ -+/* This structure definition is used only by the driver and any change impose incompatibility issue in driver */ -+/* The structure following this structure (g992p3PhyDataPumpCapabilities) can be changed in PHY application */ -+ -+typedef struct -+ { -+ Boolean rcvNTREnabled, shortInitEnabled, diagnosticsModeEnabled; -+ -+ char featureSpectrum, featureOverhead; -+ char featureTPS_TC[4], featurePMS_TC[4]; -+ -+ short rcvNOMPSDus, rcvMAXNOMPSDus, rcvMAXNOMATPus; -+ short usSubcarrierIndex[kG992p3MaxSpectBoundsUpSize], -+ usLog_tss[kG992p3MaxSpectBoundsUpSize]; -+ short numUsSubcarrier; -+ short rcvNOMPSDds, rcvMAXNOMPSDds, rcvMAXNOMATPds; -+ short dsSubcarrierIndex[kG992p3MaxSpectBoundsDownSize], -+ dsLog_tss[kG992p3MaxSpectBoundsDownSize]; -+ short numDsSubcarrier; -+ uchar sizeIDFT, fillIFFT; -+ uchar readsl2Upstream, readsl2Downstream; -+ uchar minDownOverheadDataRate, minUpOverheadDataRate; -+ uchar maxDownSTM_TPSTC, maxDownATM_TPSTC, maxDownPTM_TPSTC; -+ uchar maxUpSTM_TPSTC, maxUpATM_TPSTC, maxUpPTM_TPSTC; -+ -+ short minDownSTM_TPS_TC[4], maxDownSTM_TPS_TC[4], -+ minRevDownSTM_TPS_TC[4], maxDelayDownSTM_TPS_TC[4]; -+ uchar maxErrorDownSTM_TPS_TC[4], minINPDownSTM_TPS_TC[4]; -+ short minUpSTM_TPS_TC[4], maxUpSTM_TPS_TC[4], -+ minRevUpSTM_TPS_TC[4], maxDelayUpSTM_TPS_TC[4]; -+ uchar maxErrorUpSTM_TPS_TC[4], minINPUpSTM_TPS_TC[4]; -+ -+ short maxDownPMS_TC_Latency[4], maxUpPMS_TC_Latency[4]; -+ short maxDownR_PMS_TC_Latency[4], maxDownD_PMS_TC_Latency[4]; -+ short maxUpR_PMS_TC_Latency[4], maxUpD_PMS_TC_Latency[4]; -+ -+ short minDownATM_TPS_TC[4], maxDownATM_TPS_TC[4], -+ minRevDownATM_TPS_TC[4], maxDelayDownATM_TPS_TC[4]; -+ uchar maxErrorDownATM_TPS_TC[4], minINPDownATM_TPS_TC[4]; -+ short minUpATM_TPS_TC[4], maxUpATM_TPS_TC[4], -+ minRevUpATM_TPS_TC[4], maxDelayUpATM_TPS_TC[4]; -+ uchar maxErrorUpATM_TPS_TC[4], minINPUpATM_TPS_TC[4]; -+ -+ short minDownPTM_TPS_TC[4], maxDownPTM_TPS_TC[4], -+ minRevDownPTM_TPS_TC[4], maxDelayDownPTM_TPS_TC[4]; -+ uchar maxErrorDownPTM_TPS_TC[4], minINPDownPTM_TPS_TC[4]; -+ short minUpPTM_TPS_TC[4], maxUpPTM_TPS_TC[4], -+ minRevUpPTM_TPS_TC[4], maxDelayUpPTM_TPS_TC[4]; -+ uchar maxErrorUpPTM_TPS_TC[4], minINPUpPTM_TPS_TC[4]; -+ -+ ushort subModePSDMasks; -+ } g992p3DataPumpCapabilities; -+ -+#define kG992p3p5MaxSpectBoundsUpSize 16 -+#define kG992p3p5MaxSpectBoundsDownSize 32 -+ -+typedef struct -+ { -+ Boolean rcvNTREnabled, shortInitEnabled, diagnosticsModeEnabled; -+ -+ char featureSpectrum, featureOverhead; -+ char featureTPS_TC[4], featurePMS_TC[4]; -+ -+ short rcvNOMPSDus, rcvMAXNOMPSDus, rcvMAXNOMATPus; -+ short usSubcarrierIndex[kG992p3p5MaxSpectBoundsUpSize], -+ usLog_tss[kG992p3p5MaxSpectBoundsUpSize]; -+ short numUsSubcarrier; -+ short rcvNOMPSDds, rcvMAXNOMPSDds, rcvMAXNOMATPds; -+ short dsSubcarrierIndex[kG992p3p5MaxSpectBoundsDownSize], -+ dsLog_tss[kG992p3p5MaxSpectBoundsDownSize]; -+ short numDsSubcarrier; -+ uchar sizeIDFT, fillIFFT; -+ uchar readsl2Upstream, readsl2Downstream; -+ uchar minDownOverheadDataRate, minUpOverheadDataRate; -+ uchar maxDownSTM_TPSTC, maxDownATM_TPSTC, maxDownPTM_TPSTC; -+ uchar maxUpSTM_TPSTC, maxUpATM_TPSTC, maxUpPTM_TPSTC; -+ -+ short minDownSTM_TPS_TC[4], maxDownSTM_TPS_TC[4], -+ minRevDownSTM_TPS_TC[4], maxDelayDownSTM_TPS_TC[4]; -+ uchar maxErrorDownSTM_TPS_TC[4], minINPDownSTM_TPS_TC[4]; -+ short minUpSTM_TPS_TC[4], maxUpSTM_TPS_TC[4], -+ minRevUpSTM_TPS_TC[4], maxDelayUpSTM_TPS_TC[4]; -+ uchar maxErrorUpSTM_TPS_TC[4], minINPUpSTM_TPS_TC[4]; -+ -+ short maxDownPMS_TC_Latency[4], maxUpPMS_TC_Latency[4]; -+ short maxDownR_PMS_TC_Latency[4], maxDownD_PMS_TC_Latency[4]; -+ short maxUpR_PMS_TC_Latency[4], maxUpD_PMS_TC_Latency[4]; -+ -+ short minDownATM_TPS_TC[4], maxDownATM_TPS_TC[4], -+ minRevDownATM_TPS_TC[4], maxDelayDownATM_TPS_TC[4]; -+ uchar maxErrorDownATM_TPS_TC[4], minINPDownATM_TPS_TC[4]; -+ short minUpATM_TPS_TC[4], maxUpATM_TPS_TC[4], -+ minRevUpATM_TPS_TC[4], maxDelayUpATM_TPS_TC[4]; -+ uchar maxErrorUpATM_TPS_TC[4], minINPUpATM_TPS_TC[4]; -+ -+ short minDownPTM_TPS_TC[4], maxDownPTM_TPS_TC[4], -+ minRevDownPTM_TPS_TC[4], maxDelayDownPTM_TPS_TC[4]; -+ uchar maxErrorDownPTM_TPS_TC[4], minINPDownPTM_TPS_TC[4]; -+ short minUpPTM_TPS_TC[4], maxUpPTM_TPS_TC[4], -+ minRevUpPTM_TPS_TC[4], maxDelayUpPTM_TPS_TC[4]; -+ uchar maxErrorUpPTM_TPS_TC[4], minINPUpPTM_TPS_TC[4]; -+ -+ ushort subModePSDMasks; -+ } g992p3PhyDataPumpCapabilities; -+#endif -+ -+typedef struct -+ { -+ dslModulationType modulations; -+ bitMap auxFeatures; -+ bitMap features; -+ bitMap demodCapabilities; -+ bitMap demodCapabilities2; -+ ushort noiseMargin; /* Q4 dB */ -+#ifdef G992_ATUC -+ short xmtRSf, xmtRS, xmtS, xmtD; -+ short rcvRSf, rcvRS, rcvS, rcvD; -+#endif -+#ifdef G992P1_ANNEX_A -+ bitMap subChannelInfo; -+ carrierInfo carrierInfoG992p1; -+#endif -+#ifdef G992P1_ANNEX_B -+ bitMap subChannelInfoAnnexB; -+ carrierInfo carrierInfoG992p1AnnexB; -+#endif -+#ifdef G992_ANNEXC -+ bitMap subChannelInfoAnnexC; -+ carrierInfo carrierInfoG992p1AnnexC; -+#endif -+#if defined(G992P1_ANNEX_I) -+ bitMap subChannelInfoAnnexI; -+ carrierInfo carrierInfoG992p1AnnexI; -+#endif -+#ifdef G992P5 -+ bitMap subChannelInfop5; -+ carrierInfo carrierInfoG992p5; -+#endif -+#if defined(G992P2) || (defined(G992P1_ANNEX_A) && defined(G992P1_ANNEX_A_USED_FOR_G992P2)) -+ carrierInfo carrierInfoG992p2; -+#endif -+ ushort maxDataRate; -+ uchar minDataRate; -+#ifdef G992P3 -+ g992p3DataPumpCapabilities *carrierInfoG992p3AnnexA; -+#endif -+#ifdef G992P5 -+ g992p3DataPumpCapabilities *carrierInfoG992p5AnnexA; -+#endif -+ } dslDataPumpCapabilities; -+ -+struct __dslCommandStruct; -+typedef Boolean (*dslCommandHandlerType) (void *gDslVars, struct __dslCommandStruct*); -+typedef struct __dslCommandStruct -+ { -+ dslCommandCode command; -+ union -+ { -+ long value; -+ Boolean flag; -+ struct -+ { -+ dslTestCmdType type; -+ union -+ { -+ struct -+ { -+ ulong xmtStartTone, xmtNumOfTones; -+ ulong rcvStartTone, rcvNumOfTones; -+ uchar *xmtMap, *rcvMap; -+ } toneSelectSpec; -+ struct -+ { -+ long extraPowerRequestQ4dB; -+ long numOfCarriers; -+ char *marginTweakTableQ4dB; -+ } marginTweakSpec; -+ } param; -+ } dslTestSpec; -+ struct -+ { -+ dslDirectionType direction; -+ dslDataPumpCapabilities capabilities; -+ } dslModeSpec; -+ struct -+ { -+ bitMap setup; -+ ulong eyeConstIndex1; -+ ulong eyeConstIndex2; -+ ulong logTime; -+ } dslDiagSpec; -+ struct -+ { -+ void *pBuf; -+ ulong bufSize; -+ } dslStatusBufSpec; -+ struct -+ { -+ ulong type; -+ void *afeParamPtr; -+ ulong afeParamSize; -+ void *imagePtr; -+ ulong imageSize; -+ } dslAfeTestSpec; -+ struct -+ { -+ dslLinkLayerType type; -+ bitMap setup; -+ union -+ { -+ struct -+ { -+ dataRateMap rxDataRate; -+ dataRateMap txDataRate; -+ long rtDelayQ4ms; -+ ulong rxBufNum; -+ ulong rxCellsInBuf; -+ ulong rxPacketNum; -+ dslFrameHandlerType rxIndicateHandlerPtr; -+ dslFrameHandlerType txCompleteHandlerPtr; -+ dslPhyInitType atmPhyInitPtr; -+ } atmLinkSpec; -+ struct -+ { -+ dslHeaderHandlerType rxHeaderHandlerPtr; -+ dslRxFrameBufferHandlerType rxDataHandlerPtr; -+ dslTxFrameBufferHandlerType txHandlerPtr; -+ } atmPhyLinkSpec; -+#ifdef DSL_PACKET -+ struct -+ { -+ ulong rxBufNum; -+ ulong rxBufSize; -+ ulong rxPacketNum; -+ dslFrameHandlerType rxIndicateHandlerPtr; -+ dslFrameHandlerType txCompleteHandlerPtr; -+ dslPacketPhyInitType dslPhyInitPtr; -+ } dslPacketLinkSpec; -+ dslPacketPhyFunctions dslPacketPhyLinkSpec; -+#endif -+ struct -+ { -+ txDataHandlerType txDataHandlerPtr; -+ rxDataHandlerType rxDataHandlerPtr; -+ } nullLinkSpec; -+ } param; -+ } dslLinkLayerSpec; -+#ifdef G997_1 -+#ifdef G997_1_FRAMER -+ struct -+ { -+ bitMap setup; -+ ulong rxBufNum; -+ ulong rxBufSize; -+ ulong rxPacketNum; -+ dslFrameHandlerType rxIndicateHandlerPtr; -+ dslFrameHandlerType txCompleteHandlerPtr; -+ } dslG997Cmd; -+#endif -+ struct -+ { -+ long msgId; -+ long msgType; -+ char *dataPtr; -+ } dslClearEocMsg; -+#endif -+ struct -+ { -+ ulong code; -+ uchar *valuePtr; -+ ulong length; -+ } dslDataRegister; -+ union -+ { -+ dslStatusHandlerType statusHandlerPtr; -+ dslCommandHandlerType commandHandlerPtr; -+ eyeHandlerType eyeHandlerPtr; -+ logHandlerType logHandlerPtr; -+#if defined(DEBUG_DATA_HANDLER) -+ debugDataHandlerType debugDataHandlerPtr; -+#endif -+ dslFrameHandlerType rxIndicateHandlerPtr; -+ dslFrameHandlerType txCompleteHandlerPtr; -+ dslDriverCallbackType driverCallback; -+ } handlerSpec; -+#if !defined(CHIP_SRC) || defined(DSL_FRAME_FUNCTIONS) -+ dslFrameFunctions DslFunctions; -+#endif -+ dslOLRMessage dslOLRRequest; -+ dslPwrMessage dslPwrMsg; -+ } param; -+ } dslCommandStruct; -+ -+ -+ -+ -+typedef struct -+ { -+ dslCommandHandlerType linkCommandHandlerPtr; -+ timerHandlerType linkTimerHandlerPtr; -+ dslLinkCloseHandlerType linkCloseHandlerPtr; -+ -+ dslFrameHandlerType linkSendHandlerPtr; -+ dslFrameHandlerType linkReturnHandlerPtr; -+ -+ dslVcAllocateHandlerType linkVcAllocateHandlerPtr; -+ dslVcFreeHandlerType linkVcFreeHandlerPtr; -+ dslVcActivateHandlerType linkVcActivateHandlerPtr; -+ dslVcDeactivateHandlerType linkVcDeactivateHandlerPtr; -+ dslVcConfigureHandlerType linkVcConfigureHandlerPtr; -+ -+ dslLinkVc2IdHandlerType linkVc2IdHandlerPtr; -+ dslLinkVcId2VcHandlerType linkVcId2VcHandlerPtr; -+ dslGetFramePoolHandlerType linkGetFramePoolHandlerPtr; -+ -+#ifndef ADSLCORE_ONLY -+ dslHeaderHandlerType linkRxCellHeaderHandlerPtr; -+ dslRxFrameBufferHandlerType linkRxCellDataHandlerPtr; -+ dslTxFrameBufferHandlerType linkTxCellHandlerPtr; -+#endif -+ -+ txDataHandlerType linkTxDataHandlerPtr; -+ rxDataHandlerType linkRxDataHandlerPtr; -+ } linkLayerFunctions; -+ -+#ifndef ADSLCORE_ONLY -+ -+#define LinkLayerAssignFunctions( var, name_prefix ) do { \ -+ (var).linkCommandHandlerPtr = name_prefix##CommandHandler; \ -+ (var).linkTimerHandlerPtr = name_prefix##TimerHandler; \ -+ (var).linkCloseHandlerPtr = name_prefix##CloseHandler; \ -+ \ -+ (var).linkSendHandlerPtr = name_prefix##SendFrameHandler; \ -+ (var).linkReturnHandlerPtr = name_prefix##ReturnFrameHandler; \ -+ \ -+ (var).linkVcAllocateHandlerPtr = name_prefix##VcAllocateHandler; \ -+ (var).linkVcFreeHandlerPtr = name_prefix##VcFreeHandler; \ -+ (var).linkVcActivateHandlerPtr = name_prefix##VcActivateHandler; \ -+ (var).linkVcDeactivateHandlerPtr = name_prefix##VcDeactivateHandler; \ -+ (var).linkVcConfigureHandlerPtr = name_prefix##VcConfigureHandler; \ -+ \ -+ (var).linkVc2IdHandlerPtr = name_prefix##Vc2IdHandler; \ -+ (var).linkVcId2VcHandlerPtr = name_prefix##VcId2VcHandler; \ -+ (var).linkGetFramePoolHandlerPtr = name_prefix##GetFramePoolHandler; \ -+ \ -+ (var).linkRxCellHeaderHandlerPtr = name_prefix##RxCellHeaderHandler; \ -+ (var).linkRxCellDataHandlerPtr = name_prefix##RxCellDataHandler; \ -+ (var).linkTxCellHandlerPtr = name_prefix##TxCellHandler; \ -+ \ -+ (var).linkTxDataHandlerPtr = name_prefix##TxDataHandler; \ -+ (var).linkRxDataHandlerPtr = name_prefix##RxDataHandler; \ -+} while (0) -+ -+#else -+ -+#define LinkLayerAssignFunctions( var, name_prefix ) do { \ -+ (var).linkCommandHandlerPtr = name_prefix##CommandHandler; \ -+ (var).linkTimerHandlerPtr = name_prefix##TimerHandler; \ -+ (var).linkCloseHandlerPtr = name_prefix##CloseHandler; \ -+ \ -+ (var).linkSendHandlerPtr = name_prefix##SendFrameHandler; \ -+ (var).linkReturnHandlerPtr = name_prefix##ReturnFrameHandler; \ -+ \ -+ (var).linkVcAllocateHandlerPtr = name_prefix##VcAllocateHandler; \ -+ (var).linkVcFreeHandlerPtr = name_prefix##VcFreeHandler; \ -+ (var).linkVcActivateHandlerPtr = name_prefix##VcActivateHandler; \ -+ (var).linkVcDeactivateHandlerPtr = name_prefix##VcDeactivateHandler; \ -+ (var).linkVcConfigureHandlerPtr = name_prefix##VcConfigureHandler; \ -+ \ -+ (var).linkVc2IdHandlerPtr = name_prefix##Vc2IdHandler; \ -+ (var).linkVcId2VcHandlerPtr = name_prefix##VcId2VcHandler; \ -+ (var).linkGetFramePoolHandlerPtr = name_prefix##GetFramePoolHandler; \ -+ \ -+ (var).linkTxDataHandlerPtr = name_prefix##TxDataHandler; \ -+ (var).linkRxDataHandlerPtr = name_prefix##RxDataHandler; \ -+} while (0) -+ -+#endif -+ -+typedef struct -+ { -+ dslFrameHandlerType rxIndicateHandlerPtr; -+ dslFrameHandlerType txCompleteHandlerPtr; -+ dslStatusHandlerType statusHandlerPtr; -+ } upperLayerFunctions; -+ -+ -+/* -+ * Debug data -+ */ -+#define kDslFirstDebugData 1000 -+#define kDslXmtPerSymTimeCompData (kDslFirstDebugData + 0) -+#define kDslRcvPerSymTimeCompData (kDslFirstDebugData + 1) -+#define kDslXmtAccTimeCompData (kDslFirstDebugData + 2) -+#define kDslRcvAccTimeCompData (kDslFirstDebugData + 3) -+#define kDslRcvPilotToneData (kDslFirstDebugData + 4) -+#define kDslTEQCoefData (kDslFirstDebugData + 5) -+#define kDslTEQInputData (kDslFirstDebugData + 6) -+#define kDslTEQOutputData (kDslFirstDebugData + 7) -+#define kDslRcvFFTInputData (kDslFirstDebugData + 8) -+#define kDslRcvFFTOutputData (kDslFirstDebugData + 9) -+#define kDslRcvCarrierSNRData (kDslFirstDebugData + 10) -+#define kDslXmtToneOrderingData (kDslFirstDebugData + 11) -+#define kDslRcvToneOrderingData (kDslFirstDebugData + 12) -+#define kDslXmtGainData (kDslFirstDebugData + 13) -+#define kDslRcvGainData (kDslFirstDebugData + 14) -+#define kDslMseData (kDslFirstDebugData + 15) -+#define kDslFEQOutErrData (kDslFirstDebugData + 16) -+#define kDslFEQCoefData (kDslFirstDebugData + 17) -+#define kDslShowtimeMseData (kDslFirstDebugData + 18) -+#define kDslTimeEstimationHWPhaseTweak (kDslFirstDebugData + 24) -+#define kDslSlicerInput (kDslFirstDebugData + 40) -+#define kDslXmtConstellations (kDslFirstDebugData + 41) -+#define kDslSnr1ShiftData (kDslFirstDebugData + 50) -+#define kDslSnr1InputData (kDslFirstDebugData + 51) -+#define kDslSnr1ReverbAvgData (kDslFirstDebugData + 52) -+#define kDslAnnexCFextSnrData (kDslFirstDebugData + 53) -+#define kDslAnnexCNextSnrData (kDslFirstDebugData + 54) -+#define kG994p1OutputXmtSample (kDslFirstDebugData + 100) -+#define kG994p1OutputMicroBit (kDslFirstDebugData + 101) -+#define kG994p1OutputBit (kDslFirstDebugData + 102) -+#define kG994p1OutputTimer (kDslFirstDebugData + 103) -+ -+/****************************************************************************/ -+/* 2. Constant definitions. */ -+/* */ -+/* 2.1 Defininitive constants */ -+/****************************************************************************/ -+ -+/* dslDirectionType */ -+ -+#define kATU_C 0 -+#define kATU_R 1 -+ -+/* ATM setup maps */ -+ -+#define kAtmCallMgrEnabled 0x00000001 /* Bit 0 */ -+#define kAtmAAL1FecEnabledMask 0x00000006 /* Bit 1 */ -+#define kAtmAAL1HiDelayFecEnabled 0x00000002 /* Bit 2 */ -+#define kAtmAAL1LoDelayFecEnabled 0x00000004 /* Bit 3 */ -+ -+/* dslLinkLayerType */ -+ -+#define kNoDataLink 0 -+#define kAtmLink 0x00000001 -+#define kAtmPhyLink 0x00000002 -+#define kDslPacketLink 0x00000003 -+#define kDslPacketPhyLink 0x00000004 -+ -+/* dslModulationType */ -+#define kNoCommonModulation 0x00000000 -+#define kG994p1 0x00000020 /* G.994.1 or G.hs */ -+#define kT1p413 0x00000040 /* T1.413 handshaking */ -+#define kG992p1AnnexA 0x00000001 /* G.992.1 or G.dmt Annex A */ -+#define kG992p1AnnexB 0x00000002 /* G.992.1 or G.dmt Annex B */ -+#define kG992p1AnnexC 0x00000004 /* G.992.1 or G.dmt Annex C */ -+#define kG992p2AnnexAB 0x00000008 /* G.992.2 or G.lite Annex A/B */ -+#define kG992p2AnnexC 0x00000010 /* G.992.2 or G.lite Annex C */ -+#define kG992p3AnnexA 0x00000100 /* G.992.3 or G.DMTbis Annex A */ -+#define kG992p3AnnexB 0x00000200 /* G.992.3 or G.DMTbis Annex A */ -+#define kG992p1AnnexI 0x00000400 /* G.992.1 Annex I */ -+#define kG992p5AnnexA 0x00010000 /* G.992.5 Annex A */ -+#define kG992p5AnnexB 0x00020000 /* G.992.5 Annex B */ -+#define kG992p5AnnexI 0x00040000 /* G.992.5 Annex I */ -+#define kG992p3AnnexM 0x00080000 /* G.992.3 Annex M */ -+#define kG992p5AnnexM 0x01000000 /* G.992.5 Annex M */ -+ -+/* demodCapabilities bitmap */ -+#define kEchoCancellorEnabled 0x00000001 -+#define kSoftwareTimeErrorDetectionEnabled 0x00000002 -+#define kSoftwareTimeTrackingEnabled 0x00000004 -+#define kDslTrellisEnabled 0x00000008 -+#define kHardwareTimeTrackingEnabled 0x00000010 -+#define kHardwareAGCEnabled 0x00000020 -+#define kDigitalEchoCancellorEnabled 0x00000040 -+#define kReedSolomonCodingEnabled 0x00000080 -+#define kAnalogEchoCancellorEnabled 0x00000100 -+#define kT1p413Issue1SingleByteSymMode 0x00000200 -+#define kDslAturXmtPowerCutbackEnabled 0x00000400 -+#ifdef G992_ANNEXC_LONG_REACH -+#define kDslAnnexCPilot48 0x00000800 -+#define kDslAnnexCReverb33_63 0x00001000 -+#endif -+#ifdef G992_ANNEXC -+#define kDslCentilliumCRCWorkAroundEnabled 0x00002000 -+#else -+#define kDslEnableRoundUpDSLoopAttn 0x00002000 -+#endif -+#define kDslBitSwapEnabled 0x00004000 -+#define kDslADILowRateOptionFixDisabled 0x00008000 -+#define kDslAnymediaGSPNCrcFixEnabled 0x00010000 -+#define kDslMultiModesPreferT1p413 0x00020000 -+#define kDslT1p413UseRAck1Only 0x00040000 -+#define kDslUE9000ADI918FECFixEnabled 0x00080000 -+#define kDslG994AnnexAMultimodeEnabled 0x00100000 -+#define kDslATUCXmtPowerMinimizeEnabled 0x00200000 -+#define kDropOnDataErrorsDisabled 0x00400000 -+#define kDslSRAEnabled 0x00800000 -+ -+#define kDslT1p413HigherToneLevelNeeded 0x01000000 -+#define kDslT1p413SubsampleAlignmentEnabled 0x02000000 -+#define kDslT1p413DisableUpstream2xIfftMode 0x04000000 -+ -+/* test mode related demodCapabilities, for internal use only */ -+#define kDslTestDemodCapMask 0xF8000000 -+#define kDslSendReverbModeEnabled 0x10000000 -+#define kDslSendMedleyModeEnabled 0x20000000 -+#define kDslAutoRetrainDisabled 0x40000000 -+#define kDslPllWorkaroundEnabled 0x80000000 -+#define kDslAfeLoopbackModeEnabled 0x08000000 -+ -+/* demodCapabilities bitmap2 */ -+ -+#define kDslAnnexCProfile1 0x00000001 -+#define kDslAnnexCProfile2 0x00000002 -+#define kDslAnnexCProfile3 0x00000004 -+#define kDslAnnexCProfile4 0x00000008 -+#define kDslAnnexCProfile5 0x00000010 -+#define kDslAnnexCProfile6 0x00000020 -+#define kDslAnnexCPilot64 0x00000040 -+#define kDslAnnexCPilot48 0x00000080 -+#define kDslAnnexCPilot32 0x00000100 -+#define kDslAnnexCPilot16 0x00000200 -+#define kDslAnnexCA48B48 0x00000400 -+#define kDslAnnexCA24B24 0x00000800 -+#define kDslAnnexCReverb33_63 0x00001000 -+#define kDslAnnexCCReverb6_31 0x00002000 -+ -+#define kDslAnnexIShapedSSVI 0x00004000 -+#define kDslAnnexIFlatSSVI 0x00008000 -+ -+#define kDslAnnexIPilot64 0x00010000 -+#define kDslAnnexIA48B48 0x00020000 -+#define kDslAnnexIPilot128 0x00040000 -+#define kDslAnnexIPilot96 0x00080000 -+ -+/* Features bitmap */ -+#define kG992p2RACK1 0x00000001 -+#define kG992p2RACK2 0x00000002 -+#define kG992p2DBM 0x00000004 -+#define kG992p2FastRetrain 0x00000008 -+#define kG992p2RS16 0x00000010 -+#define kG992p2ClearEOCOAM 0x00000020 -+#define kG992NTREnabled 0x00000040 -+#define kG992p2EraseAllStoredProfiles 0x00000080 -+#define kG992p2FeaturesNPar2Mask 0x0000003B -+#define kG992p2FeaturesNPar2Shift 0 -+ -+#define kG992p1RACK1 0x00000100 -+#define kG992p1RACK2 0x00000200 -+#define kG992p1STM 0x00000800 -+#define kG992p1ATM 0x00001000 -+#define kG992p1ClearEOCOAM 0x00002000 -+#define kG992p1FeaturesNPar2Mask 0x00003B00 -+#define kG992p1FeaturesNPar2Shift 8 -+#define kG992p1DualLatencyUpstream 0x00004000 -+#define kG992p1DualLatencyDownstream 0x00008000 -+#define kG992p1HigherBitRates 0x40000000 -+ -+#if defined(G992P1_ANNEX_I) -+#define kG992p1HigherBitRates1over3 0x80000000 -+#define kG992p1AnnexIShapedSSVI 0x00000001 -+#define kG992p1AnnexIFlatSSVI 0x00000002 -+#define kG992p1AnnexIPilotFlag 0x00000008 -+#define kG992p1AnnexIPilot64 0x00000001 -+#define kG992p1AnnexIPilot128 0x00000004 -+#define kG992p1AnnexIPilot96 0x00000008 -+#define kG992p1AnnexIPilotA48B48 0x00000010 -+#endif -+ -+#define kG992p1AnnexBRACK1 0x00010000 -+#define kG992p1AnnexBRACK2 0x00020000 -+#define kG992p1AnnexBUpstreamTones1to32 0x00040000 -+#define kG992p1AnnexBSTM 0x00080000 -+#define kG992p1AnnexBATM 0x00100000 -+#define kG992p1AnnexBClearEOCOAM 0x00200000 -+#define kG992p1AnnexBFeaturesNPar2Mask 0x003F0000 -+#define kG992p1AnnexBFeaturesNPar2Shift 16 -+ -+#define kG992p1AnnexCRACK1 0x01000000 -+#define kG992p1AnnexCRACK2 0x02000000 -+#define kG992p1AnnexCDBM 0x04000000 -+#define kG992p1AnnexCSTM 0x08000000 -+#define kG992p1AnnexCATM 0x10000000 -+#define kG992p1AnnexCClearEOCOAM 0x20000000 -+#define kG992p1AnnexCFeaturesNPar2Mask 0x3F000000 -+#define kG992p1AnnexCFeaturesNPar2Shift 24 -+ -+#define kG992p1HigherBitRates1over3 0x80000000 -+ -+/* auxFeatures bitmap */ -+#define kG994p1PreferToExchangeCaps 0x00000001 -+#define kG994p1PreferToDecideMode 0x00000002 -+#define kG994p1PreferToMPMode 0x00000004 -+#define kAfePwmSyncClockShift 3 -+#define kAfePwmSyncClockMask (0xF << kAfePwmSyncClockShift) -+#define AfePwmSyncClockEnabled(val) (((val) & kAfePwmSyncClockMask) != 0) -+#define AfePwmGetSyncClockFreq(val) ((((val) & kAfePwmSyncClockMask) >> kAfePwmSyncClockShift) - 1) -+#define AfePwmSetSyncClockFreq(val,freq) ((val) |= ((((freq)+1) << kAfePwmSyncClockShift) & kAfePwmSyncClockMask)) -+ -+/* SubChannel Info bitMap for G992p1 */ -+#define kSubChannelASODownstream 0x00000001 -+#define kSubChannelAS1Downstream 0x00000002 -+#define kSubChannelAS2Downstream 0x00000004 -+#define kSubChannelAS3Downstream 0x00000008 -+#define kSubChannelLSODownstream 0x00000010 -+#define kSubChannelLS1Downstream 0x00000020 -+#define kSubChannelLS2Downstream 0x00000040 -+#define kSubChannelLS0Upstream 0x00000080 -+#define kSubChannelLS1Upstream 0x00000100 -+#define kSubChannelLS2Upstream 0x00000200 -+#define kSubChannelInfoOctet1Mask 0x0000001F -+#define kSubChannelInfoOctet2Mask 0x000003E0 -+#define kSubChannelInfoOctet1Shift 0 -+#define kSubChannelInfoOctet2Shift 5 -+ -+/****************************************************************************/ -+/* 3. Interface functions. */ -+/* */ -+/****************************************************************************/ -+ -+#ifdef G992P1 -+#if defined(G992P1_ANNEX_I2X) || defined(G992P5) -+/* lke */ -+#define kDslSamplingFreq 4416000 -+#define kDslMaxFFTSize 1024 -+#define kDslMaxFFTSizeShift 10 -+#elif defined(G992P1_ANNEX_I4X) -+#define kDslSamplingFreq 8832000 -+#define kDslMaxFFTSize 2048 -+#define kDslMaxFFTSizeShift 11 -+#elif defined(G992P1_ANNEX_I8X) -+#define kDslSamplingFreq 17664000 -+#define kDslMaxFFTSize 4096 -+#define kDslMaxFFTSizeShift 12 -+#else -+#define kDslSamplingFreq 2208000 -+#define kDslMaxFFTSize 512 -+#define kDslMaxFFTSizeShift 9 -+#endif -+#else -+#define kDslSamplingFreq 1104000 -+#define kDslMaxFFTSize 256 -+#define kDslMaxFFTSizeShift 8 -+#endif -+ -+#if defined(G992_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ) -+#define kDslATURUpstreamSamplingFreq 276000 -+#define kDslATURFFTSizeShiftUpstream 6 -+#elif defined(G992_ATUR_UPSTREAM_SAMPLING_FREQ_552KHZ) -+#define kDslATURUpstreamSamplingFreq 552000 -+#define kDslATURFFTSizeShiftUpstream 7 -+#else -+#define kDslATURUpstreamSamplingFreq kDslSamplingFreq -+#define kDslATURFFTSizeShiftUpstream kDslMaxFFTSizeShift -+#endif -+ -+#if defined(G992_ATUC_UPSTREAM_SAMPLING_FREQ_276KHZ) -+#define kDslATUCUpstreamSamplingFreq 276000 -+#define kDslATUCFFTSizeShiftUpstream 6 -+#elif defined(G992_ATUC_UPSTREAM_SAMPLING_FREQ_552KHZ) -+#define kDslATUCUpstreamSamplingFreq 552000 -+#define kDslATUCFFTSizeShiftUpstream 7 -+#else -+#define kDslATUCUpstreamSamplingFreq kDslSamplingFreq -+#define kDslATUCFFTSizeShiftUpstream kDslMaxFFTSizeShift -+#endif -+ -+#define kDslMaxSamplesPerSymbol (kDslMaxFFTSize+kDslMaxFFTSize/16) -+ -+#if defined(G992P1_ANNEX_I) || defined(G992P5) -+#define kDslMaxTEQLength 32 -+#else -+#define kDslMaxTEQLength 16 -+#endif -+ -+#define kDslMaxSymbolBlockSize 1 -+#define kDslMaxSampleBlockSize (kDslMaxSymbolBlockSize*kDslMaxSamplesPerSymbol) -+ -+#ifdef G992_ANNEXC -+#define kG992AnnexCXmtToRcvPathDelay 512 /* In samples at kDslSamplingFreq */ -+#endif -+ -+/*** For compatibility with existing test codes ***/ -+#if !defined(TARG_OS_RTEMS) -+typedef dslStatusCode modemStatusCode; -+typedef dslStatusStruct modemStatusStruct; -+typedef dslStatusHandlerType statusHandlerType; -+typedef dslCommandCode modemCommandCode; -+typedef dslCommandStruct modemCommandStruct; -+typedef dslCommandHandlerType commandHandlerType; -+#endif -+ -+extern void SM_DECL SoftDslSetRefData (void *gDslVars, ulong refData); -+extern ulong SM_DECL SoftDslGetRefData (void *gDslVars); -+extern int SM_DECL SoftDslGetMemorySize(void); -+extern void SM_DECL SoftDslInit (void *gDslVars); -+extern void SM_DECL SoftDslReset (void *gDslVars); -+extern void SM_DECL SoftDslLineHandler (void *gDslVars, int rxNSamps, int txNSamps, short *rcvPtr, short *xmtPtr) FAST_TEXT; -+extern Boolean SM_DECL SoftDslCommandHandler (void *gDslVars, dslCommandStruct *cmdPtr); -+ -+/* swap Lmem functions */ -+#if defined(bcm47xx) && defined(SWAP_LMEM) -+extern int SoftDslSwapLmem(void *gDslVars, int sectionN, int imageN); -+extern void init_SoftDslSwapLmem(void); -+#endif -+ -+/* SoftDsl time functions */ -+ -+extern ulong SM_DECL SoftDslGetTime(void *gDslVars); -+#define __SoftDslGetTime(gv) gDslGlobalVarPtr->execTime -+ -+extern void SM_DECL SoftDslTimer(void *gDslVars, ulong timeMs); -+ -+/* SoftDsl IO functions */ -+ -+extern void SM_DECL SoftDslClose (void *gDslVars); -+extern int SM_DECL SoftDslSendFrame (void *gDslVars, void *pVc, ulong mid, dslFrame * pFrame); -+extern int SM_DECL SoftDslReturnFrame (void *gDslVars, void *pVc, ulong mid, dslFrame * pFrame); -+ -+/* SoftDsl connection functions */ -+ -+extern void* SM_DECL SoftDslVcAllocate(void *gDslVars, dslVcParams *pVcParams); -+extern void SM_DECL SoftDslVcFree(void *gDslVars, void *pVc); -+extern Boolean SM_DECL SoftDslVcActivate(void *gDslVars, void *pVc); -+extern void SM_DECL SoftDslVcDeactivate(void *gDslVars, void *pVc); -+extern Boolean SM_DECL SoftDslVcConfigure(void *gDslVars, void *pVc, ulong mid, dslVcParams *pVcParams); -+ -+/* Special functions for LOG support */ -+ -+extern ulong SM_DECL SoftDslVc2Id(void *gDslVars, void *pVc); -+extern void* SM_DECL SoftDslVcId2Vc(void *gDslVars, ulong vcId); -+extern void* SM_DECL SoftDslGetFramePool(void *gDslVars); -+ -+/* Functions for host mode execution */ -+ -+extern void* SM_DECL SoftDslRxCellHeaderHandler (void *gDslVars, ulong hdr, uchar hdrHec); -+extern void* SM_DECL SoftDslRxCellDataHandler (void *gDslVars, int, void*); -+extern void* SM_DECL SoftDslTxCellHandler (void *gDslVars, int*, void*); -+extern Boolean SM_DECL SoftDslPhyCommandHandler (void *gDslVars, dslCommandStruct *cmdPtr); -+ -+/* Functions getting OEM parameters including G994 non standard info management */ -+ -+extern char* SM_DECL SoftDslGetTrainingVendorIDString(void *gDslVars); -+extern char* SM_DECL SoftDslGetVendorIDString(void *gDslVars); -+extern char* SM_DECL SoftDslGetSerialNumberString(void *gDslVars); -+extern char* SM_DECL SoftDslGetRevString(void *gDslVars); -+extern int SM_DECL SoftDslRevStringSize(void *gDslVars); -+extern int SM_DECL SoftDslSerNumStringSize(void *gDslVars); -+ -+extern void* SM_DECL SoftDslGetG994p1RcvNonStdInfo(void *gDslVars, ulong *pLen); -+extern void* SM_DECL SoftDslGetG994p1XmtNonStdInfo(void *gDslVars, ulong *pLen); -+ -+#ifdef G997_1_FRAMER -+ -+/* G997 functions */ -+ -+extern int SM_DECL SoftDslG997SendFrame (void *gDslVars, void *pVc, ulong mid, dslFrame * pFrame); -+extern int SM_DECL SoftDslG997ReturnFrame (void *gDslVars, void *pVc, ulong mid, dslFrame * pFrame); -+ -+#endif -+ -+#ifdef ADSL_MIB -+extern void * SM_DECL SoftDslMibGetData (void *gDslVars, int dataId, void *pAdslMibData); -+#endif -+ -+#define SoftDsl SoftDslLineHandler -+#define kSoftDslMaxMemorySize (32768*16384) -+ -+/* -+ * Internal functions -+ */ -+ -+extern void SoftDslStatusHandler (void *gDslVars, dslStatusStruct *status) FAST_TEXT; -+extern void SoftDslInternalStatusHandler (void *gDslVars, dslStatusStruct *status); -+ -+/* -+ * DSL OS functions -+ */ -+ -+#ifdef DSL_OS -+ -+#define SoftDslIsBgAvailable(gDslVars) (DSLOS_THREAD_INACTIVE == DslOsGetThreadState(&(gDslGlobalVarPtr->tcbDslBg))) -+#define SoftDslGetBgThread(gDslVars) \ -+ ((DSLOS_THREAD_INACTIVE != DslOsGetThreadState(&(gDslGlobalVarPtr->tcbDslBg))) ? &gDslGlobalVarPtr->tcbDslBg : NULL) -+#define SoftDslBgStart(gDslVars, pFunc) \ -+ DslOsCreateThread(&gDslGlobalVarPtr->tcbDslBg, DSLOS_PRIO_HIGHEST - 10, pFunc, gDslVars, \ -+ WB_ADDR(gDslGlobalVarPtr->bgStack), sizeof(gDslGlobalVarPtr->bgStack)) -+#define SoftDslBgStop(gDslVars) DslOsDeleteThread(&gDslGlobalVarPtr->tcbDslBg) -+ -+#define SoftDslEnterCritical() DslOsEnterCritical() -+#define SoftDslLeaveCritical(id) DslOsLeaveCritical(id) -+ -+#else -+ -+#define SoftDslIsBgAvailable(gDslVars) 1 -+#define SoftDslGetBgThread(gDslVars) 1 -+#define SoftDslBgStart(gDslVars, pFunc) (*pFunc)(gDslVars) -+#define SoftDslBgStop(gDslVars) -+ -+#define SoftDslEnterCritical() 0 -+#define SoftDslLeaveCritical(id) -+ -+#endif -+ -+/* -+ * DSL frames and native frame functions -+ */ -+ -+DslFrameDeclareFunctions (DslFrameNative) -+ -+/* -+ * These functions are for testing purpose, they are defined outside. -+ */ -+#ifdef STACK_SIZE_REQUIREMENT_TEST -+extern void StackSizeTestInitializeStackBeforeEntry(void); -+extern void StackSizeTestCheckStackAfterExit(void); -+extern void StackSizeTestBackupStack(void); -+extern void StackSizeTestRestoreStack(void); -+#endif /* STACK_SIZE_REQUIREMENT_TEST */ -+ -+#ifdef NEC_NSIF_WORKAROUND -+#define SoftDslGetG994NsStatus(gDslVars) (gDslGlobalVarPtr->G994NsStatus) -+#define SoftDslGetG994NsFailCounter(gDslVars) (gDslGlobalVarPtr->G994NsFailCounter) -+#endif -+ -+#endif /* SoftDslHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftModem.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftModem.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftModem.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftModem.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,3128 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * SoftModem.h -+ * -+ * -+ * Description: -+ * This file contains the exported interface for SoftModem.c -+ * -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Mark Gonikberg, Haixiang Liang. -+ * -+ * $Revision: 1.16 $ -+ * -+ * $Id: SoftModem.h,v 1.16 2004/04/14 21:16:51 ilyas Exp $ -+ * -+ * $Log: SoftModem.h,v $ -+ * Revision 1.16 2004/04/14 21:16:51 ilyas -+ * Merged with the latest changes in ADSL driver -+ * -+ * Revision 1.15 2004/04/13 00:56:10 ilyas -+ * Merged the latest ADSL driver changes for RTEMS -+ * -+ * Revision 1.14 2004/04/13 00:16:59 ilyas -+ * Merged the latest ADSL driver changes -+ * -+ * Revision 1.13 2003/02/22 05:07:11 ilyas -+ * Added VendorID for T1.413 mode -+ * -+ * Revision 1.12 2002/10/03 19:34:24 ilyas -+ * Added size for EOC serial number register -+ * -+ * Revision 1.11 2002/09/07 01:37:22 ilyas -+ * Added support for OEM parameters -+ * -+ * Revision 1.10 2001/12/13 02:25:34 ilyas -+ * Added definitions for G997 -+ * -+ * Revision 1.9 2001/11/30 05:56:34 liang -+ * Merged top of the branch AnnexBDevelopment onto top of the tree. -+ * -+ * Revision 1.7.2.2 2001/11/27 02:32:05 liang -+ * Combine vendor ID, serial #, and version number into SoftModemVersionNumber.c. -+ * -+ * Revision 1.7.2.1 2001/10/03 01:44:10 liang -+ * Merged with codes from main tree (tag SoftDsl_2_18). -+ * -+ * Revision 1.8 2001/09/21 19:19:01 ilyas -+ * Minor fixes for VxWorks build -+ * -+ * Revision 1.7 2000/07/17 21:08:16 lkaplan -+ * removed global pointer -+ * -+ * Revision 1.6 2000/05/03 04:09:11 ilyas -+ * Added ID for ATM log data -+ * -+ * Revision 1.5 2000/04/01 01:07:44 liang -+ * Changed file names and some module names. -+ * -+ * Revision 1.4 2000/03/02 20:18:12 ilyas -+ * Added test status code for ATM VC finished -+ * -+ * Revision 1.3 1999/08/05 20:02:11 liang -+ * Merged with the softmodem top of the tree on 08/04/99. -+ * -+ * Revision 1.2 1999/01/27 22:19:08 liang -+ * Merge with SoftModem_3_1_02. -+ * Include SoftDsl.h conditionlly so that the test utilities from SoftModem -+ * can be used without major change. It can be merged easily to SoftModem. -+ * -+ * Revision 1.170 1998/12/22 00:52:52 liang -+ * Added auxFeatures bit kV8HoldANSamUntilDetCI. When it is set, ANSam won't be -+ * sent until CI is detected (normally ANSam will be sent after 200ms). This is -+ * useful in V34 half duplex fax mode. -+ * -+ * Revision 1.169 1998/12/19 04:46:52 mwg -+ * Added bits for fax/data calling tones -+ * -+ * Revision 1.168 1998/12/17 02:46:10 scott -+ * Removed overlay-related commands/statuses and added -+ * kSetTrainingDelayReductionCmd -+ * -+ * Revision 1.167 1998/12/12 03:17:42 scott -+ * Added overlay commands and statuses -+ * -+ * Revision 1.166 1998/12/02 05:34:23 mwg -+ * Fixed a problem with bong tone detection -+ * -+ * Revision 1.165 1998/11/26 00:22:44 yura -+ * Added two more log data types: modulatorInputData & modulatorOutputData -+ * -+ * Revision 1.164 1998/11/19 03:08:04 mwg -+ * Added kSetCallProgressParamsCmd -+ * -+ * Revision 1.163 1998/11/18 23:00:03 liang -+ * Added a separate command kLoopbackTestAutoRespEnableCmd to enable or disable -+ * the loopback test auto respond feature when the modem is already on-line. -+ * -+ * Revision 1.162 1998/11/13 20:50:21 scott -+ * SoftModemInternalStatusHandler is now SM_DECL as well -+ * -+ * Revision 1.161 1998/11/13 20:42:25 scott -+ * Added SM_DECL type to entrypoint functions -+ * -+ * Revision 1.160 1998/11/13 03:02:54 scott -+ * Added SoftModemTimer prototype. -+ * Also include V.8bis types if AT_COMMANDS_V8BIS is defined. -+ * -+ * Revision 1.159 1998/11/12 01:22:46 scott -+ * Increased number of AT registers to 46 -+ * -+ * Revision 1.158 1998/11/05 22:35:18 yura -+ * Added two more S-registers -+ * -+ * Revision 1.157 1998/11/05 03:09:54 mwg -+ * Added kLapmRetryFailed to the list of LAPM errors -+ * -+ * Revision 1.156 1998/11/05 00:13:20 liang -+ * Add new connectionInfo status kLoopbackSelfTestNewErrs to report -+ * new bit errors whenever it happens. -+ * -+ * Revision 1.155 1998/11/04 07:11:33 mwg -+ * Moved declaration for SoftModemATPrintf() to SoftModem.h -+ * -+ * Revision 1.154 1998/10/29 07:24:49 mwg -+ * *** empty log message *** -+ * -+ * Revision 1.153 1998/10/15 02:09:37 luisgm -+ * added separate data rate mask for Flex to dataPumpCapabilities structure -+ * -+ * Revision 1.152 1998/10/14 00:12:15 scott -+ * Added kMnpOOBFrameCmd and command.frameSpec -+ * -+ * Revision 1.151 1998/10/09 02:19:22 luisgm -+ * added FlexV8bisStruct member to dataPumpCapabilities struc to store flex v8bis info, added define for kFlexSkipV8bis -+ * -+ * Revision 1.150 1998/10/06 19:36:33 mwg -+ * Limited 56K rates to 53K -+ * -+ * Revision 1.149 1998/10/03 03:43:38 ilyas -+ * Added status codes for Audio -+ * -+ * Revision 1.148 1998/10/01 02:03:17 mwg -+ * Added external pulse dialer option -+ * -+ * Revision 1.147 1998/09/30 01:44:26 mwg -+ * Added new functions SoftModemGetWriteBufferSize() & SoftModemGetReadBufferSize() -+ * -+ * Revision 1.146 1998/09/22 03:44:38 scott -+ * Added ALWAYS_LONG_ALIGN() macro -+ * -+ * Revision 1.145 1998/09/21 21:49:22 scott -+ * Added logDataCodes for mnpDecoder(Input/Output)Data -+ * -+ * Revision 1.144 1998/08/31 22:57:21 luisgm -+ * added constants for Flex data rates + kFlexEventTRN2AFinished -+ * -+ * Revision 1.143 1998/08/18 05:09:53 mwg -+ * Increased AT command buffer size to 128 -+ * -+ * Revision 1.142 1998/08/18 03:45:54 ilyas -+ * Integrated Audio into V70 test -+ * -+ * Revision 1.141 1998/08/14 17:46:04 ilyas -+ * Integrated Audio and G729a -+ * -+ * Revision 1.140 1998/08/10 21:42:19 mwg -+ * Added space and mark parity -+ * -+ * Revision 1.139 1998/08/08 03:39:33 scott -+ * Moved the C6xDefs and PentiumDefs includes before the internal function -+ * prototypes (to permit their redefinitions) -+ * -+ * Revision 1.138 1998/08/07 20:37:27 yura -+ * Added new S-register for &T commands -+ * -+ * Revision 1.137 1998/08/01 05:22:09 mwg -+ * Implemented split memory model -+ * -+ * Revision 1.136 1998/07/22 02:12:22 liang -+ * Added self test mode for loopback test. -+ * -+ * Revision 1.135 1998/07/21 01:19:03 liang -+ * Changed loopback test command parameter interface to use regular modeSpec. -+ * -+ * Revision 1.134 1998/07/18 03:52:10 liang -+ * Added V54 loop 2 test for V22. -+ * -+ * Revision 1.133 1998/07/15 02:45:03 mwg -+ * Added new connection info code: kPCMSpectralShapingBits -+ * -+ * Revision 1.132 1998/07/15 00:18:48 liang -+ * Add special turn off command for V34 fax to handle different turn off procedures. -+ * -+ * Revision 1.131 1998/07/13 22:19:49 liang -+ * Add V8 CI detection status and ANSam disable aux feature. -+ * -+ * Revision 1.130 1998/07/08 17:09:13 scott -+ * Added USE_LONG_ALIGN; support for 6 and PentiumDefs.h files -+ * -+ * Revision 1.129 1998/07/03 23:28:13 mwg -+ * Added Fax Class 2 defines -+ * -+ * Revision 1.128 1998/07/03 23:17:33 mwg -+ * Insuread command/status structures are long aligned -+ * -+ * Revision 1.127 1998/06/23 16:48:01 mwg -+ * Fixed a longstanding problem typical for Win95 VxD: whenever new -+ * VxD is intalled the confuguration profile may not match the old one but -+ * since the crc is correct it is still being downloaded. To avoid the problem -+ * a crc for the version number was added to avoid confusion between profiles -+ * of different versions. -+ * -+ * Revision 1.126 1998/06/19 21:04:06 liang -+ * Add auxiliary feature bit kV90ServerNotDetSbarAfterJdbarFix. -+ * -+ * Revision 1.125 1998/06/11 22:48:14 liang -+ * Add kPCM28000bpsShift constant. -+ * -+ * Revision 1.124 1998/06/05 22:11:51 liang -+ * New V90 DIL works through data mode. -+ * -+ * Revision 1.123 1998/06/01 23:03:41 liang -+ * Add v90RcvdDilDiffData logging. -+ * -+ * Revision 1.122 1998/06/01 21:24:38 mwg -+ * Changed some of the names. -+ * -+ * Revision 1.121 1998/05/13 04:55:22 mwg -+ * Now passing the number of spectral shaping bits in aux features -+ * -+ * Revision 1.120 1998/05/13 02:53:13 liang -+ * Add field "value" to command param structure. -+ * -+ * Revision 1.119 1998/05/12 04:42:23 mwg -+ * Replaced some of the status messages -+ * -+ * Revision 1.118 1998/05/11 23:36:10 mwg -+ * Added 8000Hz symbol rate to the map -+ * -+ * Revision 1.117 1998/05/05 04:28:39 liang -+ * V90 works up to data mode first version. -+ * -+ * Revision 1.116 1998/04/21 09:36:45 mwg -+ * Fixed a few problems for 16Khz and added 32Khz. -+ * -+ * Revision 1.115 1998/04/17 22:33:54 liang -+ * Added V90 DIL for mu-law PCM. -+ * -+ * Revision 1.114 1998/04/15 22:36:39 mwg -+ * Added new parameters to kDialCmd to allow individual control of each -+ * DTMF group attenuation. -+ * -+ * Revision 1.113 1998/04/15 18:16:22 ilyas -+ * Integrated V.8bis and changed coding of LinkLayerType to bitMap -+ * -+ * Revision 1.112 1998/04/15 07:59:06 mwg -+ * Added new status codes for V.90 -+ * -+ * Revision 1.111 1998/04/11 00:29:16 mwg -+ * Fixed the warnings which appeared when Irix builds were upgraded to -+ * gcc 2.8.1 -+ * -+ * Revision 1.110 1998/04/11 00:25:01 ilyas -+ * More V.70 statuses -+ * -+ * Revision 1.109 1998/04/10 23:29:31 mwg -+ * Added new field to capabilities: dataRates56K -+ * -+ * Revision 1.108 1998/04/09 02:02:56 mwg -+ * Added status for Ja detection. -+ * -+ * Revision 1.107 1998/04/03 02:05:30 ilyas -+ * More V.70 commands added -+ * -+ * Revision 1.106 1998/04/02 06:15:39 mwg -+ * Added coding type (Mu-law/A-law) status reporting. -+ * -+ * Revision 1.105 1998/03/30 09:53:57 mwg -+ * Added definition for k56Flex modulation for future use. -+ * -+ * Revision 1.104 1998/03/27 17:56:09 ilyas -+ * Added definitions for V.70 -+ * -+ * Revision 1.103 1998/03/26 23:29:04 liang -+ * Added first version of IMD estimation. -+ * -+ * Revision 1.102 1998/03/20 04:37:26 mwg -+ * Increased the size of the nominal variance to 32 bit. -+ * -+ * Revision 1.101 1998/03/06 01:22:04 yura -+ * Improved Win95 VxD segmentation handling -+ * -+ * Revision 1.100 1998/03/06 01:06:18 liang -+ * Add initial version of V90 phase 1 and 2. -+ * -+ * Revision 1.99 1998/03/05 23:42:22 mwg -+ * (hxl) Implemented enable/disable call waiting command. -+ * -+ * Revision 1.98 1998/02/26 06:13:06 mwg -+ * Increased the number of AT S-registers to account for newly introduced -+ * S9 and S10. -+ * -+ * Revision 1.97 1998/02/25 18:18:25 scott -+ * Added v42bisCycleCount for V42BIS_THROUGHPUT_CONTROL -+ * -+ * Revision 1.96 1998/02/24 05:31:20 mwg -+ * Added stuff required by international version of AT command processor. -+ * -+ * Revision 1.95 1998/02/17 01:14:10 scott -+ * Reenabled sys/types.h for Linux builds -+ * -+ * Revision 1.94 1998/02/16 22:32:23 scott -+ * Changed copyright notice -+ * -+ * Revision 1.93 1998/02/16 22:17:44 scott -+ * Turned off include of sys/types.h for normal builds -+ * -+ * Revision 1.92 1998/02/16 21:53:28 scott -+ * Exclude sys/types.h for another compiler -+ * -+ * Revision 1.91 1998/02/09 18:24:10 scott -+ * Fixed ComplexShort type to work around bugs in MS and GreenHill compilers -+ * -+ * Revision 1.90 1998/01/27 01:37:36 mwg -+ * Added new log identifier for pcm infidelity data. -+ * -+ * Revision 1.89 1998/01/22 19:49:32 liang -+ * Add auxFeature bit kFaxV34HDXAllowAsymCtrlChan. -+ * -+ * Revision 1.88 1998/01/21 02:32:01 liang -+ * Add more V34 half duplex training progress codes. -+ * -+ * Revision 1.87 1997/12/23 03:28:25 liang -+ * Add more half duplex V34 related constants. -+ * -+ * Revision 1.86 1997/12/18 19:38:50 scott -+ * Added agcData log type. -+ * Added kDisableFaxFastClearDown demod capability -+ * -+ * Revision 1.85 1997/12/18 06:02:45 mwg -+ * Added a function to reenable DC offset tracking. -+ * -+ * Revision 1.84 1997/12/17 22:46:30 mwg -+ * Minor modifications to X2 escape status reporting. -+ * -+ * Revision 1.83 1997/12/16 06:49:45 mwg -+ * Implemented proper data rate reporting for PCM modem. -+ * -+ * Revision 1.82 1997/12/13 06:11:08 mwg -+ * Added X2 interface hooks -+ * -+ * Revision 1.81 1997/12/02 06:21:33 mwg -+ * Implemented kSetATRegister command. -+ * -+ * Revision 1.80 1997/11/27 02:11:41 liang -+ * Add code for half duplex V34 control channel. -+ * -+ * Revision 1.79 1997/11/19 19:52:48 guy -+ * Added constant to define V.34 half duplex operation -+ * -+ * Revision 1.78 1997/10/24 05:15:53 scott -+ * Added AGC and phase hit recovery to demodCapabilities -+ * -+ * Revision 1.77 1997/10/01 02:47:50 liang -+ * Add PCM interface. -+ * -+ * Revision 1.76 1997/09/29 15:48:04 yura -+ * Added #pragma statement for W95 Vxd -+ * -+ * Revision 1.75 1997/09/18 20:32:39 scott -+ * Do not include VxD support files if GENERATE_DEPENDENCIES is defined. -+ * -+ * Revision 1.74 1997/09/18 12:40:55 yura -+ * Removed #ifdef statments to be more robust -+ * -+ * Revision 1.73 1997/09/17 17:32:41 scott -+ * Do not include sys/types.h for 6 -+ * -+ * Revision 1.72 1997/08/08 00:53:48 mwg -+ * Added fields for LAP-M frames printout. -+ * Added fields in auxFeatures to pass preemphasis filter parameters -+ * to V.34 phase 3 when doing PTT testing. -+ * -+ * Revision 1.71 1997/08/06 03:41:45 yura -+ * Added a few includes and defines needed by Win 95 driver. -+ * -+ * Revision 1.70 1997/08/05 03:22:10 liang -+ * Add equalizer center tap adjustment calculation related constants. -+ * -+ * Revision 1.69 1997/07/29 02:44:19 mwg -+ * Added new field to dataPumpCapabilities structure. This field is not -+ * yet exposed to external interface and currently is only used to -+ * enable PTT testing. -+ * Added new commands: kStartDataModemPTTTestCmd & kStartDataModemLoopbackTestCmd -+ * -+ * Revision 1.68 1997/07/22 22:05:10 liang -+ * Change sample rate setup as a normal command. -+ * -+ * Revision 1.67 1997/07/21 23:23:30 liang -+ * Define SoftModemSetSampleRate as null when SAMPLE_RATE_CONVERSION is not defined. -+ * -+ * Revision 1.66 1997/07/21 22:38:36 liang -+ * Change sample rate converter structure so that sample rate can be changed -+ * on the fly (at very begining) to either 8KHz or 9600Hz. -+ * -+ * Revision 1.65 1997/07/21 20:22:01 mwg -+ * Added statusInfoData to the log identifiers. -+ * -+ * Revision 1.64 1997/07/16 20:40:07 scott -+ * Added multitone monitor fields -+ * -+ * Revision 1.63 1997/07/10 02:31:08 mwg -+ * 1. Added kRxFrameHDLCFlags detected status for the -+ * framingInfo. -+ * 2. Added kLapmMNPFrameDetected status to lapmStatusCode. -+ * 3. Increased the number of AT registers to 35 -+ * 4. Modified LinkLayerSpec structure in modemCommandStruc -+ * to provide the initial values of rxDataRate & -+ * txDataRate and RT delay for the cases when -+ * link layer is started *after* the data connection -+ * is established and the status snooper is unable -+ * to determine the rates and RT delay. -+ * 5. Added a few extra *empty* constant definitions for -+ * disabled features. -+ * -+ * Revision 1.62 1997/07/02 19:15:05 scott -+ * Added bits for Bel103 & Bel212 modulations. -+ * -+ * Revision 1.61 1997/07/02 05:15:16 mwg -+ * Added MNP code. -+ * -+ * Revision 1.60 1997/07/01 23:52:48 mwg -+ * Modified the record test setup to log and use all the commands. -+ * -+ * Revision 1.59 1997/06/25 19:11:26 mwg -+ * 1. Added new framingInfoCode values for Async framing error reporting; -+ * 2. Added a substructure to pass serial data format for kSetDTERate cmd; -+ * -+ * Revision 1.58 1997/05/28 02:05:08 liang -+ * Add PCM modem phase 2 codes. -+ * -+ * Revision 1.57 1997/05/12 21:55:08 liang -+ * Add call waiting tone detector module. -+ * -+ * Revision 1.56 1997/03/21 23:50:08 liang -+ * Added initial version of V8bis module to CVS tree. -+ * -+ * Revision 1.55 1997/03/19 18:35:05 mwg -+ * Changed copyright notice. -+ * -+ * Revision 1.54 1997/03/11 11:11:45 mwg -+ * Added code to report V42bis statistics. -+ * -+ * Revision 1.53 1997/03/04 06:21:08 mwg -+ * Added logging of most commands. -+ * -+ * Revision 1.52 1997/02/28 23:45:13 liang -+ * Added training progress status report kPhaseJitterDeactivated. -+ * -+ * Revision 1.51 1997/02/28 22:23:22 mwg -+ * Implemented the following features: -+ * - Cleardown for fax modulations V.27, V.29 V.17 -+ * - Rockwell compatible bitmap report (needed by a customer) -+ * -+ * Revision 1.50 1997/02/28 03:05:31 mwg -+ * Added more logging data types. -+ * -+ * Revision 1.49 1997/02/27 05:28:58 mwg -+ * Added RxFrameOK report. -+ * -+ * Revision 1.48 1997/02/27 01:48:53 liang -+ * Add kV8MenuDataWord1 and kV8MenuDataWord2 connectionInfo status. -+ * -+ * Revision 1.47 1997/02/24 02:30:27 mwg -+ * Added new log data: predictorErrData -+ * -+ * Revision 1.46 1997/02/22 03:00:22 liang -+ * Add echoCancelledSignalData. -+ * -+ * Revision 1.45 1997/02/21 01:26:42 liang -+ * Add six more bits for the Demodulator capabilities to deal with 2nd order -+ * time tracking & PLLs, as well as shorter NEEC & PFEEC, and front end HBF. -+ * -+ * Revision 1.44 1997/02/17 03:09:00 mwg -+ * Added LAPM statistics printout. -+ * -+ * Revision 1.43 1997/02/04 08:38:47 mwg -+ * Added dc cancelled samples printout. -+ * -+ * Revision 1.42 1997/01/29 21:40:28 mwg -+ * Changed the way timers work: now time is passed as Q4 ms instead of ticks. -+ * Completed the 8KHz front end implementation. -+ * Got rid of kSamplesPerSecond constant. -+ * -+ * Revision 1.41 1997/01/24 07:13:50 mwg -+ * Added new statuses for automoder. -+ * -+ * Revision 1.40 1997/01/23 02:03:08 mwg -+ * Replaced old sample rate conversion with the newer one. -+ * Still has to resolve the automoding issue. -+ * -+ * Revision 1.39 1997/01/21 00:55:04 mwg -+ * Added 8KHz front end functionality. -+ * -+ * Revision 1.38 1996/11/13 00:30:55 liang -+ * Add kAutoLoadReductionEnabled to demodCapabilities so that PFEEC, FEEC, IEEC -+ * can be disabled automatically, but for worst processor loading test they -+ * won't be disabled when this bit is not set. -+ * -+ * Revision 1.37 1996/11/07 23:07:18 mwg -+ * Rearranged global variables to allow V.17 short training. -+ * -+ * Revision 1.36 1996/09/17 23:55:05 liang -+ * Change kMaxDataBlockSize from 16 to 24 to handle high data rates. -+ * -+ * Revision 1.35 1996/09/05 19:43:39 liang -+ * Removed caller ID error status code kCallerIDUnknownMessageType, and -+ * added caller ID status codes kCallerIDUnknownMessage & kCallerIDWholeMessage. -+ * Changed the callerIDStatus report structure. -+ * -+ * Revision 1.34 1996/08/29 00:36:57 liang -+ * Added kLapmTxFrameStatus and kLapmRxFrameStatus. -+ * -+ * Revision 1.33 1996/08/27 22:56:01 liang -+ * Added kResetHardware status code. -+ * -+ * Revision 1.32 1996/08/23 23:35:35 liang -+ * Add kATDebugStatus and function SoftModemGetHybridDelay. -+ * -+ * Revision 1.31 1996/08/22 01:13:19 yg -+ * Added AT command processor. -+ * -+ * Revision 1.30 1996/08/12 21:46:47 mwg -+ * Added code to report capabilities. -+ * -+ * Revision 1.29 1996/08/10 01:59:59 mwg -+ * Added report of the sent rate sequence; -+ * -+ * Revision 1.28 1996/08/07 22:15:02 mwg -+ * Added new status reports: -+ * kRemoteFreqOffset -+ * kIEECDeactivated -+ * kPFEECDeactivated -+ * -+ * Revision 1.27 1996/06/27 05:15:48 mwg -+ * Added V.24 circuit status. -+ * -+ * Revision 1.26 1996/06/27 02:12:43 mwg -+ * Cleaned the code. -+ * -+ * Revision 1.25 1996/06/20 23:57:30 mwg -+ * Added new training progress status. -+ * -+ * Revision 1.24 1996/06/18 21:13:50 mwg -+ * Added trellis MSE data logging. -+ * -+ * Revision 1.23 1996/06/12 02:31:10 mwg -+ * Added new type: VeryLong -+ * -+ * Revision 1.22 1996/06/08 22:15:39 mwg -+ * Added new status report: kCleardownStarted -+ * Added new field for the features: kV34bisEnabled -+ * -+ * Revision 1.21 1996/05/31 00:29:11 liang -+ * Add feature bit kV34ExtraINFOPreamble. -+ * -+ * Revision 1.20 1996/05/30 23:28:31 mwg -+ * Replaced enums with #defines -+ * -+ * Revision 1.19 1996/05/25 00:38:27 mwg -+ * Added kProjectedDataRate training progress report. -+ * -+ * Revision 1.18 1996/05/24 23:27:15 mwg -+ * Added mode status codes. -+ * -+ * Revision 1.17 1996/05/10 05:39:59 liang -+ * Move the includes for DEBUG inside "ifndef SoftModemTypes" so that -+ * cap build won't break. -+ * -+ * Revision 1.16 1996/05/08 01:49:34 mwg -+ * Added capability to setup auxiliary data channel handlers. -+ * -+ * Revision 1.15 1996/05/07 22:51:08 liang -+ * Added group delay estimation and improved symbol rate selection process. -+ * -+ * Revision 1.14 1996/05/06 06:49:09 mwg -+ * Fixed linux problems. -+ * -+ * Revision 1.13 1996/05/02 08:40:16 mwg -+ * Merged in Chromatic bug fixes. -+ * -+ * Revision 1.12 1996/05/02 02:26:21 mwg -+ * Added code to implement dozing functionality for v.34. -+ * -+ * Revision 1.11 1996/05/01 22:43:13 mwg -+ * Added new command: kDozeCmd; -+ * -+ * Revision 1.10 1996/05/01 19:20:16 liang -+ * Add command codes kInitiateRetrainCmd and kInitiateRateRenegotiationCmd. -+ * -+ * Revision 1.9 1996/04/25 01:12:37 mwg -+ * Added new flag: rapid preliminary EC training. -+ * -+ * Revision 1.8 1996/04/20 02:26:22 mwg -+ * Added preliminary far-end echo support -+ * -+ * Revision 1.7 1996/04/15 23:26:16 mwg -+ * Changed flag definitions for v34 modem. -+ * -+ * Revision 1.6 1996/04/04 02:35:50 liang -+ * Change kCid from 0x0080 to 0x0004 (0x0080 is defined as kV32). -+ * -+ * Revision 1.5 1996/03/08 23:07:01 mwg -+ * Added name for the struct. -+ * -+ * Revision 1.4 1996/03/02 00:59:27 liang -+ * Added typedef for V34CodingParameters structure. -+ * -+ * Revision 1.3 1996/02/27 02:28:31 mwg -+ * Fixed a bug in kLapmLongADPEnabled definition. -+ * -+ * Revision 1.2 1996/02/19 23:50:59 liang -+ * Removed compressionSetup parameter from the link layer command structure. -+ * -+ * Revision 1.1.1.1 1996/02/14 02:35:13 mwg -+ * Redesigned the project directory structure. Merged V.34 into the project. -+ * -+ * Revision 1.5 1996/01/15 23:26:04 liang -+ * Change the softmodem command structure name from SoftwareModemCommand -+ * to SoftwareModemCommandParameters. -+ * -+ *****************************************************************************/ -+#ifndef SoftModemPh -+#define SoftModemPh -+ -+/****************************************************************************/ -+/* 1. Type definitions. */ -+/* */ -+/* 1.1 General types */ -+/****************************************************************************/ -+ -+#ifndef SM_DECL -+#define SM_DECL -+#endif -+ -+#ifdef __VxWORKS__ -+#include -+#endif -+ -+#ifdef DEBUG -+/* We have to define __wchar_t for Linux */ -+#if defined __linux__ && !defined _NO_WHCAR_DEF_ -+typedef long int __wchar_t; -+#endif -+#if !defined(__KERNEL__) && !defined(_CFE_) -+#include -+#include -+#endif -+ -+#if defined(__linux__) || defined (__unix__) || defined (__unix) || (defined (__mips__) && !defined(_CFE_) && !defined(VXWORKS) && !defined(TARG_OS_RTEMS))/* enable if necessary, but not for dos-based builds */ -+#include -+#endif -+ -+ -+#endif /* DEBUG */ -+ -+#if defined(W95_DRIVER) -+#pragma code_seg("_LTEXT", "LCODE") -+#pragma data_seg("_LDATA", "LCODE") -+#pragma const_seg("_LDATA", "LCODE") -+#pragma bss_seg("_LDATA", "LCODE") -+#pragma pack(1) -+#endif /* W95_DRIVER */ -+ -+#ifndef SoftModemTypes -+#include "SoftModemTypes.h" -+#endif /* SoftModemTypes */ -+ -+ -+typedef struct -+ { -+ schar x, y; -+ } ComplexByte; -+ -+typedef struct -+ { -+ uchar numerator; -+ uchar denominator; -+ } Ratio; -+ -+#ifdef PEGASUS -+typedef union -+ { -+ struct -+ { -+ short x, y; -+ }; -+ -+ long foo; -+ } ComplexShort; -+#else -+typedef struct -+ { -+ short x, y; -+#ifdef GREENHILL -+ long a[0]; -+#endif -+ } ComplexShort; -+#endif -+ -+typedef struct -+ { -+ long x, y; -+ } ComplexLong; -+ -+typedef struct -+ { -+ ushort x0, x1, x2; -+ short x3; -+ } VeryLong; -+ -+typedef union -+ { -+ struct -+ { -+ uchar number; -+ uchar defaultValue; /* default value */ -+ uchar maxValue; /* max allowed value */ -+ uchar minValue; /* should be greater then maxValue to make reg readonly */ -+ } param; -+ long alignment; -+ } SRegisterDefinition; -+ -+#define MacroPaste2(a,b) a##b -+#define MacroPaste(a,b) MacroPaste2(a,b) -+#define ALWAYS_LONG_ALIGN() long MacroPaste(ALIGNMENT,__LINE__); -+ -+#ifdef USE_LONG_ALIGN -+#define LONG_ALIGN() ALWAYS_LONG_ALIGN() -+#else -+#define LONG_ALIGN() -+#endif -+ -+typedef ulong bitMap; -+ -+typedef int pace; -+#define kStop 0 -+#define kVerySlow 1 -+#define kSlow 2 -+#define kMedium 3 -+#define kFast 4 -+ -+ -+/****************************************************************************/ -+/* 1. Type definitions. */ -+/* */ -+/* 1.2 Modem specific types */ -+/****************************************************************************/ -+ -+typedef long directionType; -+#define kXmt 0 -+#define kRcv 1 -+#define kXmtRcv 2 -+ -+ -+#define originating kXmt -+#define answering kRcv -+#define kOrg kXmt -+#define kAns kRcv -+#define kOrgAns kXmtRcv -+ -+#define ORIGINATING originating -+#define ANSWERING answering -+ -+typedef int pcmCodingType; -+#define kMuLawPCM 0 -+#define kALawPCM 1 -+ -+#define kMuLawPCMScaleShift 2 -+#define kALawPCMScaleShift 3 -+ -+/* link layer and framer share defines */ -+typedef bitMap framerType; -+typedef bitMap linkLayerType; -+#define kNoFramer 0 -+#define kSync 0x00000001 -+#define kAsync 0x00000002 -+#define kHDLC 0x00000004 -+#define kLapm 0x00000008 -+#define kMnp 0x00000010 -+#define kV70 0x00000020 -+#define kSAM 0x00000040 -+ -+ -+typedef bitMap modulationMap; -+typedef bitMap symbolRateMap; -+typedef bitMap dataRateMap; -+typedef bitMap featureMap; -+typedef bitMap breakType; -+ -+typedef bitMap audioType; -+#define kRawAudio 0 -+#define kAudioG729A 1 -+#define kAudioG729 2 -+#define kAudioG723 3 -+ -+ -+#ifndef ADSL_MODEM -+typedef long modemStatusCode; -+#endif -+ /* Information status Codes: 1-31 */ -+#define kSetSampleRate 1 -+#define kModulationKnown 2 -+#define kRxSymbolRate 3 -+#define kTxSymbolRate 4 -+#define kRxCarrierFreq 5 -+#define kTxCarrierFreq 6 -+#define kTxPreemphasisFilter 7 -+#define kTxPowerAdjustment 8 -+#define kRemoteTxPreemphasisFilter 9 -+#define kRemoteTxPowerAdjustment 10 -+#define kRxRateKnown 11 -+#define kTxRateKnown 12 -+#define kRxDataModeActive 13 -+#define kTxDataModeActive 14 -+#define kTxSignalCompleted 15 -+#define kDTMFSignalDetected 16 -+#define kModemSignalDetected 17 -+#define kCallProgressSignalDetected 18 -+#define kCustomSignalDetected 19 -+#define kFaxPreambleDetected 20 -+#define kV24CircuitStatusChange 21 -+#define kHookStateChange 22 -+#define kCallWaitingToneDetected 23 -+#define kMultiToneSignalDetected 24 -+#define kPulseShuntStateChange 25 -+#define kRingFrequency 26 -+ -+ -+ /* Warning status Codes: 32-64 */ -+#define kError 32 -+#define kV34Exception 33 -+#define kClearDownLocal 34 -+#define kClearDownRemote 35 -+#define kCarrierPresent 36 -+#define kCarrierLost 37 -+#define kRetrainingLocal 38 -+#define kRetrainingRemote 39 -+#define kRateRenegotiationLocal 40 -+#define kRateRenegotiationRemote 41 -+#define kFallbackStarted 42 -+#define kFallForwardStarted 43 -+#define kCleardownStarted 44 -+#define kIllegalCommand 45 -+ -+ /* Auxiliary status Codes: 64-.. */ -+#define kTrainingProgress 64 -+#define kConnectionInfo 65 -+#define kDialerStatus 66 -+#define kFramingInfo 67 -+#define kBreakReceived 68 -+#define kLapmStatus 69 -+#define kLapmParameter 70 -+#define kV42bisStatus 71 -+#define kCallerIDStatus 72 -+#define kIOStatus 73 -+#define kCapabilitiesStatus 74 -+#define kSpeakerStatus 75 -+#define kATProfileChanged 76 -+#define kATDebugStatus 77 -+#define kResetHardware 78 -+#define kV8bisStatus 79 -+#define kMnpStatus 80 -+#define kMnpParameter 81 -+#define kV70Status 82 -+#define kV70Parameter 83 -+#define kFaxClass2Status 84 -+#define kAudioStatus 85 -+#define kAudioParameter 86 -+#define kOverlayStatus 87 -+#define kCallerIDCircuitStatus 88 -+#define kV80Status 89 -+#define kV80Parameter 90 -+#define kLocalCountryChanged 91 -+#define kDTERateChanged 92 -+#define kATResponse 93 -+#define kFramerConfigured 94 -+#define kA8RStatus 95 -+#define kA8TStatus 96 -+#define kVersionStatus 97 -+ -+ /* Testing status codes: 128-... */ -+ /* These statuses are generated by modem test suit */ -+#define kTestFinished 128 -+#define kConnectivityTestFinished 129 -+#define kTestCheckSum 130 -+#define kLogFileControl 131 -+#define kTestAtmVcFinished 132 -+#define kTestClearEocFinished 133 -+#define kTestG997Finished 134 -+ -+typedef long modemErrorCode; -+#define kNoError 0 -+#define kErrorTimerExpired 1 -+#define kErrorNoSReceived 2 -+#define kErrorNoSbarReceived 3 -+ -+ -+typedef long dialerStatusCode; -+#define kDialCompleted 0 -+#define kNoDialToneDetected 1 -+#define kBongToneDetected 2 -+#define kNoBongToneDetected 3 -+#define kErrorIllegalDialModifier 5 -+#define kDialStarted 6 -+#define kExternalPulseDialDigit 7 -+ -+ -+typedef long framingInfoCode; -+#define kRxFrameOK 0 -+#define kRxFrameTooLong 1 -+#define kRxFrameCRCError 2 -+#define kTxFrameUnderrun 3 -+#define kRxFrameOverrun 4 -+#define kRxFrameAborted 5 -+#define kRxFrameParityError 6 -+#define kRxFrameFormatError 7 -+#define kRxFrameHDLCFlagsDetected 8 -+ -+ -+typedef long IOStatusCode; -+#define kRxDataReady 0 -+#define kRxBufferOverflow 1 -+#define kTxSpaceAvailable 2 -+#define kTxBufferEmpty 3 -+ -+typedef long capabilitiesStatusCode; -+#define kSymbolRates 0 -+#define kDataRates 1 -+#define kFeatures 2 -+#define kDemodCapabilities 3 -+#define kRateThresholdAdjustment 4 -+#define kXmtLevel 5 -+#define kHybridDelay 6 -+#define kAuxFeatures 7 -+ -+ -+typedef long A8TStatusCode; -+#define kA8TFinished 0 -+ -+typedef long callerIDStatusCode; -+#define kCallerIDError 0 -+#define kCallerIDChannelSeizureReceived 1 -+#define kCallerIDMarkSignalReceived 2 -+#define kCallerIDTime 3 -+#define kCallerIDTelnum 4 -+#define kCallerIDName 5 -+#define kCallerIDEnd 6 -+#define kCallerIDUnknownMessage 7 -+#define kCallerIDWholeMessage 8 -+ -+ -+typedef long callerIDErrorCode; -+#define kCallerIDNoError 0 -+#define kCallerIDMarkSignalError 1 -+#define kCallerIDTooManyMarkBits 2 -+#define kCallerIDMessageTooLong 3 -+#define kCallerIDChecksumError 4 -+ -+ -+typedef long connectionInfoCode; -+#define kRTDelay 1 -+#define kRxSignalLevel 2 -+#define kTimingOffset 3 -+#define kFreqOffset 4 -+#define kPhaseJitter 5 -+#define kSNR 6 -+#define kNearEchoLevel 7 -+#define kSER 8 -+#define kNearEndDelay 9 -+#define kFarEchoLevel 10 -+#define kL1L2SNRDifference 11 -+#define kDCOffset 12 -+#define kTotalRxPower 13 -+#define kRemoteFreqOffset 14 -+/* obsolete #define kV8MenuDataWord1 15 */ -+/* obsolete #define kV8MenuDataWord2 16 */ -+#define kPCMP2AnalogDetSNR 17 -+#define kPCMP2DigitalDetSNR 18 -+#define kPCMP2RBSDetSNR 19 -+#define kEqCenterTapOffset 20 -+#define kPCMPadValue 21 -+#define kPCMRBSMap 22 -+#define kPCMCodingType 23 -+#define kPCMSpectralShapingBits 24 -+#define kLoopbackSelfTestResult 25 -+#define kEyeQuality 26 -+#define kLoopbackSelfTestNewErrs 27 -+#define kV34EqlLengthStatus 28 -+#define kV34EqlOffsetStatus 29 -+#define kV8CallMenuData 30 -+#define kV8JointMenuData 31 -+#define kPCMClientIeecLengthStatus 32 -+#define kPCMClientIeecOffsetStatus 33 -+#define kSeamlessRateChange 34 -+ -+typedef long trainingProgressCode; -+#define kPeriodicalSignalDetected 0 -+#define kPhaseReversalDetected 1 -+#define kSignalStartDetected 2 -+#define kSignalEndDetected 3 -+#define kSSignalDetected 4 -+#define kSbarSignalDetected 5 -+#define kJ4SignalDetected 6 -+#define kJ16SignalDetected 7 -+#define kJprimeSignalDetected 8 -+#define kMPSignalDetected 9 -+#define kMPprimeSignalDetected 10 -+#define kMPSignalSent 11 -+#define kMPprimeSignalSent 12 -+#define kRateSignalDetected 13 -+#define kESignalDetected 14 -+#define kRateSignalSent 15 -+ -+#define kAutomodingTryModulation 16 -+#define kAutomodingCompleted 17 -+#define kRCFaxBitMapStatus 18 -+ -+#define kV8CIDetected 19 -+#define kV8ANSToneDetected 20 -+#define kV8ANSamDetected 21 -+#define kV8CMDetected 22 -+#define kV8JMDetected 23 -+#define kV8CJDetected 24 -+#define kV8Finished 25 -+ -+#define kV34Phase2Started 26 -+#define kV34Phase2INFOSequenceDetected 27 -+#define kV34Phase2NearEndEchoDetected 28 -+#define kV34Phase2L1Receiving 29 -+#define kV34Phase2L2Receiving 30 -+#define kV34Phase2Finished 31 -+#define kV34Phase3Started 32 -+#define kV34Phase3Finished 33 -+#define kV34Phase4Started 34 -+#define kV34Phase4Finished 35 -+#define kV34DecoderParameters 36 -+#define kV34EncoderParameters 37 -+ -+#define kMaxLocalRxDataRate 38 -+#define kMaxLocalTxDataRate 39 -+#define kMaxRemoteRxDataRate 40 -+#define kMaxRemoteTxDataRate 41 -+#define kProjectedDataRate 42 -+#define kFEECDeactivated 43 -+#define kIEECDeactivated 44 -+#define kPFEECDeactivated 45 -+#define kPhaseJitterDeactivated 46 -+ -+#define kPCMP2DetectedDigitalConnection 47 -+#define kPCMP2DetectedRBS 48 -+#define kX2DetectedPhase1Escape 49 -+ -+#define kStarted1200BpsTraining 50 -+#define kStarted2400BpsTraining 51 -+#define kUnscrambledOneDetected 52 -+#define kScrambled1200BpsOneDetected 53 -+#define kScrambled2400BpsOneDetected 54 -+#define kV22BisS1Detected 55 -+#define kV22InitiateLoop2Test 56 -+#define kV22RespondLoop2Test 57 -+#define kV22Loop2TestAlt01Detected 58 -+ -+#define kDataModemLoop1TestStarted 59 -+#define kDataModemLoop1TestFinished 60 -+#define kDataModemLoop2TestStarted 61 -+#define kDataModemLoop2TestFinished 62 -+#define kDataModemLoop3TestStarted 63 -+#define kDataModemLoop3TestFinished 64 -+#define kDataModemSelfLoopTestEnabled 65 -+ -+#define kPCMPhase3Started 70 -+#define kPCMPhase3Finished 71 -+#define kPCMPhase4Started 72 -+#define kPCMPhase4Finished 73 -+ -+#define kV90JaSignalDetected 74 -+#define kV90JdSignalDetected 75 -+#define kV90JdPrimeSignalDetected 76 -+#define kV90RSignalDetected 77 -+#define kV90RBarSignalDetected 78 -+#define kV90CPSignalDetected 79 -+ -+#define kV90CPtSignalSent 80 -+#define kV90CPSignalSent 81 -+#define kV90CPprimeSignalSent 82 -+ -+ -+#define kV34SeamlessRateChangeRequestSent 83 -+#define kV34SeamlessRateChangeUpdateSent 84 -+#define kV34SeamlessRateChangeRequestReceived 85 -+#define kV34SeamlessRateChangeUpdateReceived 86 -+#define kV34SeamlessRateChangeUpdateTimeout 87 -+ -+#define kV90JaSignalAcknowledged 88 -+ -+#define kV34HCtrlChanPPhDetected 100 -+#define kV34HCtrlChanMPhDetected 101 -+#define kV34HCtrlChanRatesKnown 102 -+#define kV34HDXCtrlChanBinary1Detected 103 -+#define kV34HDXPhase3Started 104 -+#define kV34HDXPhase3Finished 105 -+#define kV34HDXPrimChanBinary1Detected 106 -+#define kFlexEventTRN2AFinished 107 -+ -+#define kV32RanginigStarted 108 -+#define kV32RangingStarted 108 -+#define kV32RanginigFinished 109 -+#define kV32RangingFinished 109 -+ -+ -+typedef long lapmStatusCode; -+#define kLapmDisconnected 0 /* LAPM disconnected */ -+#define kLapmConnected 1 /* LAPM is connected */ -+#define kLapmV42ODPDetected 2 /* LAPM ODP is detected */ -+#define kLapmV42ADPDetected 3 /* LAPM V.42 ADP is detected */ -+#define kLapmUnknownADPDetected 4 /* LAPM Unsupported ADP is detected */ -+#define kLapmTimeout 5 /* LAPM Timeout */ -+#define kLapmMNPFrameDetected 6 /* LAPM detected MNP frame */ -+#define kLapmDPDetectionTimedOut 7 /* LAPM Unsupported ADP is detected */ -+#define kLapmError 8 /* LAPM Error */ -+#define kLapmTestResult 9 /* LAPM loopback test result */ -+#define kLapmTxFrameStatus 10 -+#define kLapmRxFrameStatus 11 -+#define kLapmTxStatistics 12 -+#define kLapmRxStatistics 13 -+ -+typedef long lapmTakedownReason; -+#define kLapmRemoteDisconnect 0 -+#define kLapmLocalDisconnect 1 -+#define kLapmCannotConnect 2 -+#define kLapmProtocolError 3 -+#define kLapmCompressionError 4 -+#define kLapmInactivityTimer 5 -+#define kLapmRetryFailed 6 -+ -+ -+typedef long lapmParameterCode; -+#define kLapmXmtK 0 -+#define kLapmRcvK 1 -+#define kLapmXmtN401 2 -+#define kLapmRcvN401 3 -+#define kLapmTESTSupport 4 -+#define kLapmSREJSupport 5 -+#define kLapmCompDir 6 -+#define kLapmCompDictSize 7 -+#define kLapmCompStringSize 8 -+ -+ -+typedef long lapmErrorCode; -+#define kLapmNoError 0 -+#define kLapmBufferOverflow 1 -+#define kLapmFrameTooLong 2 -+#define kLapmBadFrame 3 -+#define kLapmUnknownEvent 4 -+/* 6 is reserved for kLapmRetryFailed defined above */ -+ -+ -+typedef long lapmTestResultCode; -+#define kLapmTestPassed 0 -+#define kLapmTestRequestIgnored 1 -+#define kLapmTestAlreadyInProgress 2 -+#define kLapmTestNotSupported 3 -+#define kLapmTestFailed 4 -+ -+ -+typedef long v42bisStatusCode; -+#define kV42bisEncoderTransparentMode 0 /* V.42bis encoder transparent mode active */ -+#define kV42bisEncoderCompressedMode 1 /* V.42bis encoder compressed mode active */ -+#define kV42bisDecoderTransparentMode 2 /* V.42bis decoder transparent mode active */ -+#define kV42bisDecoderCompressedMode 3 /* V.42bis decoder compressed mode active */ -+#define kV42bisError 4 /* V.42bis error */ -+#define kV42bisEncoderStatistics 5 -+#define kV42bisDecoderStatistics 6 -+ -+ -+typedef long v42bisErrorCode; -+#define kV42bisUndefinedEscSequence 0 /* V.42bis undefined escape sequence */ -+#define kV42bisCodewordSizeOverflow 1 /* V.42bis codeword size overflow */ -+#define kV42bisUndefinedCodeword 2 /* V.42bis undefined codeword */ -+ -+typedef long mnpStatusCode; -+#define kMnpDisconnected 0 /* Mnp disconnected */ -+#define kMnpConnected 1 /* Mnp is connected */ -+#define kMnpFallback 2 /* Mnp is falling back to buffer mode */ -+#define kMnpError 3 /* Mnp Error */ -+#define kMnpTimeout 4 /* Mnp Timeout */ -+#define kMnpInvalidLT 5 /* Invalid LT received */ -+#define kMnpRetransmitFrame 6 -+#define kMnpNack 7 -+#define kMnpTxFrameStatus 8 -+#define kMnpRxFrameStatus 9 -+#define kMnpTxStatistics 10 -+#define kMnpRxStatistics 11 -+ -+typedef long mnpTakedownReason; -+#define kMnpRemoteDisconnect 0 -+#define kMnpLocalDisconnect 1 -+#define kMnpCannotConnect 2 -+#define kMnpProtocolError 3 -+#define kMnpCompressionError 4 -+#define kMnpInactivityTimer 5 -+#define kMnpRetryFailed 6 -+ -+ -+typedef long mnpParameterCode; -+#define kMnpProtocolLevel 0 -+#define kMnpServiceClass 1 -+#define kMnpOptimizationSupport 2 -+#define kMnpCompressionSupport 3 -+#define kMnpN401 4 -+#define kMnpK 5 -+ -+ -+typedef long mnpErrorCode; -+#define kMnpNoError 0 -+#define kMnpBufferOverflow 1 -+#define kMnpFrameTooLong 2 -+#define kMnpBadFrame 3 -+#define kMnpUnknownEvent 4 -+ -+ -+typedef long v70StatusCode; -+#define kV70Disconnected 0 /* V70 disconnected */ -+#define kV70Connected 1 /* V70 is connected */ -+#define kV70Error 2 /* V70 Error */ -+#define kV70Timeout 3 /* V70 Timeout */ -+#define kV70ChannelDown 4 /* V70 channel released */ -+#define kV70ChannelUp 5 /* V70 channel established */ -+#define kV70AudioChannelDown 6 /* V70 audio channel released */ -+#define kV70AudioChannelUp 7 /* V70 audio channel established */ -+#define kV70DataChannelDown 8 /* V70 data channel released */ -+#define kV70DataChannelUp 9 /* V70 data channel established */ -+#define kV70OOBChannelDown 10 /* V70 out-of-band channel released */ -+#define kV70OOBChannelUp 11 /* V70 out-of-band channel established */ -+#define kV70TxFrameStatus 12 -+#define kV70RxFrameStatus 13 -+#define kV70TxStatistics 14 -+#define kV70RxStatistics 15 -+#define kV70StateTransition 16 -+ -+typedef long v70TakedownReason; -+#define kV70RemoteDisconnect 0 -+#define kV70LocalDisconnect 1 -+#define kV70CannotConnect 2 -+#define kV70ProtocolError 3 -+#define kV70CompressionError 4 -+#define kV70InactivityTimer 5 -+#define kV70RetryFailed 6 -+ -+ -+typedef long v70ParameterCode; -+#define kV70SuspendResume 0 -+#define kV70CrcLength 1 -+#define kV70NumberOfDLCs 2 -+#define kV70uIH 3 -+ -+#define kV70LapmXmtK 10 -+#define kV70LapmRcvK 11 -+#define kV70LapmXmtN401 12 -+#define kV70LapmRcvN401 13 -+#define kV70LapmTESTSupport 14 -+#define kV70LapmSREJSupport 15 -+#define kV70LapmCompDir 16 -+#define kV70LapmCompDictSize 17 -+#define kV70LapmCompStringSize 18 -+ -+#define kV70AudioHeader 20 /* if audio header is present in audio frames */ -+#define kV70BlockingFactor 21 /* audio blocking factor (default 1) */ -+#define kV70SilenceSuppression 22 /* audio silence suppression */ -+ -+ -+ -+typedef long v70ErrorCode; -+#define kV70NoError 0 -+#define kV70BadFrame 1 -+ -+typedef long audioStatusCode; -+#define kAudioFramesLost 0 /* One or more audio frames were lost */ -+#define kAudioTxBufferOverflow 1 -+#define kAudioRxBufferOverflow 2 -+#define kAudioRxBufferUnderflow 3 -+ -+ -+typedef long v80StatusCode; -+#define kV80Disconnected 0 /* V80 disconnected */ -+#define kV80Connected 1 /* V80 is connected */ -+#define kV80Error 2 /* V80 Error */ -+#define kV80InBandStatus 3 /* V80 in-band SAM status */ -+#define kV80TxFrameStatus 12 -+#define kV80RxFrameStatus 13 -+#define kV80TxStatistics 14 -+#define kV80RxStatistics 15 -+ -+typedef long v80TakedownReason; -+#define kV80RemoteDisconnect 0 -+#define kV80LocalDisconnect 1 -+ -+typedef long v80ErrorCode; -+#define kV80NoError 0 -+#define kV80BadFrame 1 -+ -+typedef long overlayStatusCode; -+#define kOverlayBegin 0 /* DSP has halted */ -+#define kOverlayEnd 1 /* DSP has received entire overlay */ -+#define kOverlayElapsedTime 2 /* time elapsed(as viewed by datapump) during overlay */ -+#define kOverlayRecordingData 3 /* ms of data that we are recording */ -+#define kOverlayReplayingData 4 /* ms of data that we have replayed so far */ -+#define kOverlayReplayDone 5 /* playback is done */ -+ -+/* types for kOverlayRecording/ReplayingData */ -+#define kOverlayTxData 0 -+#define kOverlayRxData 1 -+ -+/* -+ * Rockwell faxmodem compatible bitmap (kRCFaxBitMapStatus) -+ */ -+#define kRCFaxFCD 0x01 -+#define kRCFaxP2 0x02 -+#define kRCFaxPN 0x04 -+#define kRCFaxDCD 0x08 -+#define kRCFaxTX 0x10 -+#define kRCFaxCTS 0x20 -+ -+ -+#ifndef ADSL_MODEM -+typedef long modemCommandCode; -+#endif -+ /* Basic Action commands 00-63 */ -+#define kIdleCmd 0 -+#define kStartFaxModemCmd 1 -+#define kStartDataModemCmd 2 -+#define kStartCallProgressMonitorCmd 3 -+#define kSendTonesCmd 4 -+#define kStartCallerIDRcvCmd 5 -+#define kSetLinkLayerCmd 6 -+#define kSetFramerCmd 7 -+#define kTestLinkLayerCmd 8 -+#define kIdleRcvCmd 9 -+#define kIdleXmtCmd 10 -+#define kSetStatusHandlerCmd 11 -+#define kSetEyeHandlerCmd 12 -+#define kSetLogHandlerCmd 13 -+#define kSendBreakCmd 14 -+#define kSendTestCmd 15 -+#define kDisconnectLinkCmd 16 -+#define kSetXmtGainCmd 17 -+#define kStartADSICmd 18 -+#define kSetHybridDelayCmd 19 -+#define kCleardownCmd 20 -+#define kInitiateRetrainCmd 21 -+#define kInitiateRateRenegotiationCmd 22 -+#define kDialToneIndicator 23 -+#define kSetRxDataHandler 24 /* not used yet */ -+#define kSetTxDataHandler 25 /* not used yet */ -+#define kSetAuxRxDataHandler 26 -+#define kSetAuxTxDataHandler 27 -+#define kRingIndicatorCmd 28 -+#define kDTERateIndicatorCmd 29 -+#define kStartV8bisCmd 30 -+#define kSendMultiTonesCmd 31 -+#define kSetMultiToneParamsCmd 32 -+#define kSetModemSampleRateCmd 33 -+#define kStartDataModemPTTTestCmd 34 -+#define kStartDataModemLoopbackTestCmd 35 -+#define kRingFrequencyCmd 36 -+#define kSetCallWaitingDetectorStateCmd 37 -+#define kV34HDXTurnOffCurrentModeCmd 38 -+#define kSetAudioCmd 39 -+#define kLoopbackTestAutoRespEnableCmd 40 -+#define kSetCallProgressParamsCmd 41 -+#define kSetTrainingDelayReductionCmd 42 -+#define kSetFaxECMPageBufferPtrCmd 43 -+#define kSetLineCurrentStateCmd 44 -+#define kSetFramerParameterCmd 45 -+#define kStartDozeCmd 46 -+#define kEndDozeCmd 47 -+#define kStartRingFrequencyDetectorCmd 48 -+#define kSetBufferingDelayAdjustmentCmd 49 -+ -+ /* Composite action commands 64-127 */ -+#define kDialCmd 64 -+#define kSendCallingToneCmd 65 -+#define kV24CircuitChangeCmd 66 -+#define kStartATModeCmd 67 -+#define kStopATModeCmd 68 -+#define kSetATRegister 69 -+#define kSetATRegisterLimits 70 -+#define kSetATIResponse 71 -+#define kEnableATDebugMode 72 -+#define kSetWhiteListEntry 73 -+#define kSetBlackListEntry 74 -+ -+#define kV70Setup 75 /* additional V70 configuration */ -+#define kEstablishChannel 76 /* Establish new link layer channel (V70) */ -+#define kReleaseChannel 77 /* Release link layer channel (V70) */ -+#define kWaitChannelEstablished 78 /* Wait for establishment of the new link layer channel (V70) */ -+ -+/* unused 79 */ -+#define kMnpOOBFrameCmd 80 -+#define kV80InBandCmd 81 /* V80 In-band commands */ -+#define kSetV250IdString 82 -+#define kSetInternationalTablesCmd 83 -+#define kConfigureCountryCmd 84 -+#define kConigureCountryCmd 84 -+#define kV8ControlCmd 85 -+#define kV8bisSendMessage 86 -+#define kSetHWIdCmd 87 -+#define kSetCodecIdCmd 88 -+#define kOverCurrentDetected 89 -+ -+ -+ -+typedef long v8ControlType; -+#define kEnableDTEControl 1 -+#define kSetV8ControlTimeout 2 -+#define kSetCIValue 3 -+#define kSetCMValue 4 -+#define kSetJMValue 5 -+#define kSendCJ 6 -+#define kSetCallFunctionCategory 7 -+ -+typedef long v250IdStringCode; -+#define kGMIString 1 -+#define kGMMString 2 -+#define kGMRString 3 -+#define kGSNString 4 -+#define kGOIString 5 -+ -+typedef long kCallProgressParameterCode; -+#define kModemSignalPowerThreshold 1 -+#define kDialtonePowerThreshold 2 -+#define kRingBackPowerThreshold 3 -+#define kBusyPowerThreshold 4 -+#define kReorderPowerThreshold 5 -+#define k2ndDTnPowerThreshold 6 -+#define kMinDialtoneTime 7 -+#define kDialtoneFreqRange 8 -+#define kRingBackFreqRange 9 -+#define kBusyFreqRange 10 -+#define kReorderFreqRange 11 -+#define k2ndDTnFreqRange 12 -+ -+ -+typedef long framerParameterCode; -+#define kSetHDLCLeadingFlags 0 -+#define kHDLCResetFlagDetection 1 -+#define kSyncFramerSetup 2 -+#define kHDLCSendCRC 3 -+#define kHDLCSendFlags 4 -+#define kHDLCSendAborts 5 -+ -+ -+typedef long logDataCode; -+#define eyeData 0 -+#define mseData 1 -+#define rxData 2 -+#define txData 3 -+#define neecData 4 -+#define eqlData 5 -+#define ieecData 6 -+#define feecData 7 -+#define eqlPllData 8 -+#define feecPllData 9 -+#define timingData 10 -+#define pjPhaseErrData 11 -+#define pjEstimateData 12 -+#define pjEstDiffData 13 -+#define pjCoefData 14 -+#define inputSignalData 15 -+#define outputSignalData 16 -+#define agcGainData 17 -+#define automoderData 18 -+#define v8CMData 19 -+#define v8JMData 20 -+#define inputAfterNeecData 21 -+#define eqlErrData 22 -+#define dpskMicrobitsData 23 -+#define v34P2LSamplesData 24 -+#define phaseSplittedLData 25 -+#define fftedLData 26 -+#define channelSNRData 27 -+#define noiseEstimateData 28 -+#define signalEstimateData 29 -+#define v34INFOData 30 -+#define v34ChanProbData 31 -+#define v34P2OutputData 32 -+#define v8ANSamDetectData 33 -+#define pFeecData 34 -+#define channelDelayData 35 -+#define timingOffsetData 36 -+#define trellisMSEData 37 -+#define interpolatedSignalData 38 -+#define dcCancelledSignalData 39 -+#define echoCancelledSignalData 40 -+#define predictorErrData 41 -+#define commandInfoData 42 -+#define unusedInfoData 43 -+#define atCommandInfoData 44 -+#define atResponseInfoData 45 -+#define hwTerminalTxData 46 -+#define hwTerminalRxData 47 -+#define statusInfoData 48 -+#define channelResponseData 49 -+#define channelImpulseRespData 50 -+#define x2PcmP1DetectorInData 51 -+#define x2PcmP1DetectorOutData 52 -+#define eqlRealData 53 -+#define ieecRealData 54 -+#define neecOutputData 55 -+#define precodedEqlOutputData 56 -+#define eqlRealErrData 57 -+#define idealEqlOutputData 58 -+#define agcData 59 -+#define pcmInfidelityData 60 -+#define v42bisCycleCount 61 -+#define pcmImdOffsetCoefData 62 -+#define pcmImdOffsetData 63 -+#define v90RcvdDilLongData 64 -+#define v90RcvdDilShortData 65 -+#define v90DilProducedData 66 -+#define pcmEncoderKbitsData 67 -+#define pcmEncoderMbitsData 68 -+#define pcmEncoderSbitsData 69 -+#define pcmDecoderKbitsData 70 -+#define pcmDecoderMbitsData 71 -+#define pcmDecoderSbitsData 72 -+#define v90CPorCPtData 73 -+#define mnpDecoderInputData 74 -+#define mnpDecoderOutputData 75 -+#define v42bisEncoderInputData 76 -+#define v42bisDecoderInputData 77 -+#define modulatorInputData 78 -+#define modulatorOutputData 79 -+#define encodedStatusData 80 -+#define blockFramerTxData 81 -+#define blockFramerRxData 82 -+#define framerTxData 83 -+#define framerRxData 84 -+#define dpskBasebandData 85 -+#define dpskBasebandLPFedData 86 -+#define dpskRealData 87 -+#define bandEdgeCorrectedSignalData 88 -+#define atmLogData 89 -+#define clearEocLogData 90 -+#define g997LogData 91 -+ -+ -+#define kLogDataDelimiter 0xFEFEFEFE -+ -+/****************************************************************************/ -+/* 1. Type definitions. */ -+/* */ -+/* 1.3 Handlers */ -+/****************************************************************************/ -+ -+typedef void (SM_DECL *rcvHandlerType) (void *gDslVars, int, short*); -+typedef void (SM_DECL *xmtHandlerType) (void *gDslVars, int, short*); -+typedef int (SM_DECL *xmtHandlerWithRtnValType) (void *gDslVars, int, short*); -+typedef void (SM_DECL *timerHandlerType) (void *gDslVars, long); -+typedef int (SM_DECL *interpolatorHandlerType) (void *gDslVars, int, short*, short*); -+typedef void (SM_DECL *controlHandlerType) (void *gDslVars, int); -+ -+typedef int (SM_DECL *txDataHandlerType) (void *gDslVars, int, uchar*); -+typedef int (SM_DECL *rxDataHandlerType) (void *gDslVars, int, uchar*); -+ -+typedef bitMap (SM_DECL *signalDetectorType) (void *gDslVars, int, long, long*); -+ -+ -+typedef void (SM_DECL *hookHandlerType) (void *gDslVars, Boolean); -+ -+typedef short* (SM_DECL *sampBuffPtrType) (void *gDslVars, int); -+ -+typedef void (SM_DECL *eyeHandlerType) (void *gDslVars, int, ComplexShort*); -+typedef void (SM_DECL *logHandlerType) (void *gDslVars, logDataCode, ...); -+ -+typedef void (SM_DECL *voidFuncType) (void *gDslVars); -+ -+typedef int (SM_DECL *txAudioHandlerType) (void *gDslVars, int, short*); -+typedef int (SM_DECL *rxAudioHandlerType) (void *gDslVars, int, short*); -+ -+ -+/****************************************************************************/ -+/* 1. Type definitions. */ -+/* */ -+/* 1.4 Structures */ -+/****************************************************************************/ -+ -+/* -+ * AT command processor definitions -+ */ -+#define kATRegistersNumber 56 -+#define kFirstConfigurationRegister 500 -+#define kLastConfigurationRegister 515 -+#define kFirstInternationalRegister 516 -+#define kLastInternationalRegister 595 -+ -+ -+ -+#define kATMaxDialStringSize 128 -+typedef struct -+ { -+ struct -+ { -+ uchar loadNumber; /* Which profile to load upon powerup/reset */ -+ uchar countryCode; /* T.35 Country Code */ -+ uchar profile[2][kATRegistersNumber]; -+ uchar dialString[4][kATMaxDialStringSize + 1]; -+ } config; -+ ulong versionCode; -+ ulong crcCheckSum; -+ } NVRAMConfiguration; -+ -+/* Structure to hold international settings */ -+typedef struct -+ { -+ char *name; -+ int countryCode; -+ const SRegisterDefinition *userRegisters; -+ const ulong *configRegisters; -+ } CountryDescriptor; -+ -+/* -+ * V.34 coding parameters structure -+ */ -+ -+typedef struct -+ { -+ /* DO NOT CHANGE THE ORDER OF FIELDS IN THIS STRUCTURE! -+ * (Some assembly code depends on it!) If you -+ * must add fields, please do so at the bottom. -+ */ -+ -+ int symbolRateIndex, -+ dataRateIndex, -+ userSNRAdjustment; -+ Boolean auxChannel, -+ expConstellation, -+ precoding, -+ nonlinearCoding; -+ schar J, /* number of data frames in superframe */ -+ P, /* number of mapping frames in a data frame */ -+ r, /* number of high mapping frames in a data frame */ -+ b, /* number of data bits in a mapping frame */ -+ W, /* number of aux bits in a data frame */ -+ K, /* number of S bits in a mapping frame */ -+ q, /* number of Q bits in a 2D symbol */ -+ M; /* number of rings in shell mapping */ -+ long nominalVariance; /* the signal variance which gives 1e-2 BLER Q10 */ -+ int bitsPerDataFrame; -+ short quantRoundOff, -+ quantMask; -+ uchar nTrellisStates, -+ log2NTrellisStates; -+ short gain1xmt, -+ gain2xmt, -+ gain1rcv, -+ gain2rcv; -+ ushort bitInversionPattern; -+ } V34CodingParams; -+ -+typedef long v8bisStatusCode; -+typedef bitMap v8bisConnectionSetup; -+#if defined(V8BIS) || defined(AT_COMMANDS_V8BIS) -+#include "V8bisMainTypes.h" -+#endif -+ -+#define kMaxMultiTones 4 /* MultiTone: search for up to this many tones at once */ -+ -+#ifndef ADSL_MODEM -+typedef struct -+ { -+ modemStatusCode code; -+ union -+ { -+ long value; -+ long freq; -+ modemErrorCode error; -+ modulationMap modulation; -+ modulationMap modemSignal; -+ dataRateMap dataRate; -+ long dtmfSignal; -+ bitMap callProgressSignal; -+ bitMap customSignal; -+ void *ptr; -+ struct -+ { -+ long detected; -+ long numTones; -+ long tones[kMaxMultiTones]; -+ } multiToneInfo; -+ struct -+ { -+ v8bisStatusCode code; -+ long value; -+ } v8bisStatus; -+ struct -+ { -+ trainingProgressCode code; -+ long value; -+ } trainingInfo; -+ struct -+ { -+ long code; -+ long value; -+ } v24Circuit; -+ struct -+ { -+ trainingProgressCode code; -+ void* ptr; -+ } advancedTrainingInfo; -+ struct -+ { -+ capabilitiesStatusCode code; -+ long value; -+ } capabilitiesStatusInfo; -+ struct -+ { -+ connectionInfoCode code; -+ long value; -+ } connectionInfo; -+ struct -+ { -+ connectionInfoCode code; -+ int length; -+ uchar *ptr; -+ } advancedConnectionInfo; -+ struct -+ { -+ dialerStatusCode code; -+ long value; -+ long makeTime; -+ long breakTime; -+ } dialerStatus; -+ struct -+ { -+ long enabled; -+ long volume; -+ } speakerStatus; -+ framingInfoCode framingInfo; -+ IOStatusCode ioStatus; -+ struct -+ { -+ lapmStatusCode code; -+ union -+ { -+ long value; -+ lapmTakedownReason reason; -+ lapmErrorCode error; -+ lapmTestResultCode testResult; -+ struct -+ { -+ long length; -+ uchar *framePtr; -+ } frame; -+ struct -+ { -+ long nFrames; -+ long nFrameErrors; -+ } statistic; -+ } param; -+ } lapmStatus; -+ struct -+ { -+ lapmParameterCode code; -+ long value; -+ } lapmParameter; -+ struct -+ { -+ v42bisStatusCode code; -+ union -+ { -+ long value; -+ v42bisErrorCode error; -+ struct -+ { -+ long nBytesIn; -+ long nBytesOut; -+ } statistic; -+ } param; -+ } v42bisStatus; -+ struct -+ { -+ mnpStatusCode code; -+ union -+ { -+ long value; -+ mnpTakedownReason reason; -+ mnpErrorCode error; -+ struct -+ { -+ long nFrames; -+ long nFrameErrors; -+ } statistic; -+ struct -+ { -+ ulong nSize; -+ uchar *Buffer; -+ } fallback; -+ struct -+ { -+ char *header; -+ void *frame; -+ } frame; -+ struct -+ { -+ long nack; -+ long rFrameNo; -+ } timeout; -+ struct -+ { -+ long frameNo; -+ long framesPending; -+ } retrFrame; -+ } param; -+ } mnpStatus; -+ struct -+ { -+ mnpParameterCode code; -+ long value; -+ } mnpParameter; -+ struct -+ { -+ v70StatusCode code; -+ union -+ { -+ long value; -+ v70TakedownReason reason; -+ v70ErrorCode error; -+ struct -+ { -+ long nFrames; -+ long nFrameErrors; -+ } statistic; -+ struct -+ { -+ long length; -+ uchar *framePtr; -+ } frame; -+ struct -+ { -+ long nack; -+ long rFrameNo; -+ } timeout; -+ struct -+ { -+ long frameNo; -+ long framesPending; -+ } retrFrame; -+ struct -+ { -+ long ChannelId; -+ long DLCI; -+ ulong LcNum; -+ v70TakedownReason reason; -+ } channelInfo; -+ struct -+ { -+ long ChannelId; -+ long stateOld; -+ long stateNew; -+ } stateInfo; -+ } param; -+ ulong v70Time; -+ } v70Status; -+ struct -+ { -+ audioStatusCode code; -+ union -+ { -+ long value; -+ struct -+ { -+ long nReq; -+ long nAvail; -+ } buffer; -+ struct -+ { -+ long nFrames; -+ long nFrameErrors; -+ } statistic; -+ struct -+ { -+ long length; -+ uchar *framePtr; -+ } frame; -+ } param; -+ } audioStatus; -+ struct -+ { -+ v80StatusCode code; -+ union -+ { -+ long value; -+ v80TakedownReason reason; -+ v80ErrorCode error; -+ struct -+ { -+ long nFrames; -+ long nFrameErrors; -+ } statistic; -+ struct -+ { -+ long length; -+ uchar *framePtr; -+ } frame; -+ struct -+ { -+ long code; -+ long value; -+ } inBand; -+ } param; -+ ulong v80Time; -+ } v80Status; -+ struct -+ { -+ v70ParameterCode code; -+ long value; -+ } v70Parameter; -+ struct -+ { -+ breakType type; -+ long length; -+ } breakStatus; -+ struct -+ { -+ callerIDStatusCode code; -+ union -+ { -+ long value; -+ struct -+ { -+ callerIDErrorCode code; -+ long value; -+ } callerIDError; -+ struct -+ { -+ long length; -+ char* ptr; -+ } message; -+ } param; -+ } callerIDStatus; -+ struct -+ { -+ ulong signal; -+ uchar *msg1; -+ long msg1Length; -+ uchar *msg2; -+ long msg2Length; -+ } A8RStatus; -+ struct -+ { -+ overlayStatusCode code; -+ long value; -+ long value2; -+ } overlayStatus; -+ struct -+ { -+ ulong nBits; -+ ulong nBlocks; -+ ulong nBitErrors; -+ ulong nBlockErrors; -+ -+ ulong nAudioBits; -+ ulong nAudioBlocks; -+ ulong nAudioSyncErrors; -+ ulong nAudioBlockErrors; -+ } testResults; -+ ulong checksum; -+ struct -+ { -+ ulong sizeM; -+ uchar *filename; -+ } logFileControlStatus; -+ struct -+ { -+ long direction; -+ long module; -+ long message; -+ long data; -+ } -+ faxClass2Status; -+ -+ } param; -+ } modemStatusStruct; -+ -+typedef void (SM_DECL *statusHandlerType) (void *gDslVars, modemStatusStruct*); -+#endif /* ADSL_MODEM */ -+ -+/****************************************************************************/ -+/* 1. Type definitions. */ -+/* */ -+/* 1.5 Command structure */ -+/****************************************************************************/ -+ -+typedef struct -+ { -+ Boolean remoteModemIsFlex; -+ uchar countryCode; -+ ushort manufacturerId; -+ uchar licenseeId; -+ uchar productCapabilities; -+ Boolean digitalModeFlag; -+ Boolean prototypeFlag; -+ uchar version; -+ } -+FlexV8bisStruct; -+ -+typedef struct -+ { -+ symbolRateMap symbolRates; -+ dataRateMap dataRates; -+ dataRateMap dataRates56k; -+ dataRateMap dataRatesFlex; -+ featureMap features; -+ bitMap auxFeatures; -+ bitMap demodCapabilities; -+ long rateThresholdAdjustment; /* dB Q4 */ -+ FlexV8bisStruct flexRemoteV8bisInfo; -+ } dataPumpCapabilities; -+ -+#ifndef ADSL_MODEM -+typedef struct SoftwareModemCommandParameters -+ { -+ modemCommandCode command; -+ union -+ { -+ long xmtGain; -+ ulong hybridDelayQ4ms; -+ long modemSampleRate; -+ long timeInMs; -+ long state; -+ long freq; -+ NVRAMConfiguration *nvramConfigurationPtr; -+ long enabled; -+ long value; -+ uchar *phoneNumber; -+ uchar *faxECMPageBufferPtr; -+ CountryDescriptor *countryDescriptorTable; -+ struct -+ { -+ dataRateMap dteRate; -+ bitMap format; -+ } dteRateSpec; -+ struct -+ { -+ v8ControlType code; -+ long value; -+ uchar *buffer; -+ } v8ControlSpec; -+ struct -+ { -+ directionType direction; -+ v8bisConnectionSetup setup; -+ void *capPtr; -+ voidFuncType confirmMsFunc; -+ voidFuncType genMsFunc; -+ xmtHandlerWithRtnValType ogmFunc; -+ } v8bisSpec; -+ struct -+ { -+ directionType direction; -+ } ADSISpec; -+ struct -+ { -+ directionType direction; -+ modulationMap modulations; -+ dataPumpCapabilities capabilities; -+ } modeSpec; -+ struct -+ { -+ long time, -+ freq1, -+ freq2, -+ freq3, -+ freq4, -+ mag1, -+ mag2, -+ mag3, -+ mag4; -+ } toneSpec; -+ struct -+ { -+ long signal; -+ uchar *msg1; -+ long msg1Length; -+ uchar *msg2; -+ long msg2Length; -+ long sig_en; -+ long msg_en; -+ long supp_delay; -+ } -+ v8bisMessageSpec; -+ struct -+ { -+ linkLayerType type; -+ bitMap setup; -+ dataRateMap rxDataRate; -+ dataRateMap txDataRate; -+ long rtDelayQ4ms; -+ rxDataHandlerType rxDataHandlerPtr; -+ txDataHandlerType txDataHandlerPtr; -+ } linkLayerSpec; -+ struct -+ { -+ framerType type; -+ bitMap setup; -+ directionType direction; -+ long fill[2]; /* need to match linkLayerSpec */ -+ rxDataHandlerType rxDataHandlerPtr; -+ txDataHandlerType txDataHandlerPtr; -+ } framerSpec; -+ struct -+ { -+ framerParameterCode code; -+ long value; -+ } framerParameterSpec; -+ struct -+ { -+ bitMap callProgressDetectorSetup; -+ signalDetectorType callProgressDetectorPtr; /* if nil, use defaults */ -+ signalDetectorType customDetectorPtr; /* if nil, no custom detector */ -+ } callProgressMonitorSpec; -+ struct -+ { -+ ulong maxTones; /* maximum number of simultaneous tones to detect */ -+ ulong allowableVariance; /* maximum cumulative variance in the eight interpolated frequencies */ -+ ulong totalPowerThreshold; /* ignore complete block if power less than this */ -+ ulong powerShiftThreshold; /* ignore a bin if its power is less than (totalPowerValue >> powerShiftThreshold) */ -+ ulong toneMatchThresholdHz; /* tones within +/- this many Hz of original tone are considered the same tone */ -+ ulong binSeparation; /* ignore tones with a spacing of less than this */ -+ ulong outsideFreqDeviation; /* an individual value in the interpolated array can be up to this many Hz outside of the expected angle range */ -+ } multiToneSpec; -+ struct -+ { -+ uchar *dialString; /* nil limited string for DTMF dialing sequence */ -+ long pulseBreakTime, -+ pulseMakeTime, -+ pulseInterDigitTime, -+ toneDigitTime, -+ toneInterDigitTime, -+ toneLoGroupMag, -+ toneHiGroupMag, -+ flashTime, -+ pauseTime, -+ signalWaitTimeout, -+ blindDialingTimeout; -+ bitMap dialerSetup; -+ bitMap callProgressDetectorSetup; -+ signalDetectorType callProgressDetectorPtr; /* if nil, use defaults */ -+ signalDetectorType customDetectorPtr; /* if nil, no custom detector */ -+ hookHandlerType hookHandlerPtr; /* nil if DTMF dialing specified*/ -+ } dialSpec; -+ struct -+ { -+ long timeOn, -+ timeOff, -+ freq; -+ } callingToneSpec; -+ union -+ { -+ statusHandlerType statusHandlerPtr; -+ eyeHandlerType eyeHandlerPtr; -+ logHandlerType logHandlerPtr; -+ rxDataHandlerType rxDataHandlerPtr; -+ txDataHandlerType txDataHandlerPtr; -+ } handlerSpec; -+ struct -+ { -+ breakType type; -+ long length; -+ } breakSpec; -+ struct -+ { -+ long length; -+ uchar *dataPtr; -+ } lapmTestSpec; -+ struct -+ { -+ bitMap setupLapm; -+ rxDataHandlerType rxAudioHandlerPtr; -+ txDataHandlerType txAudioHandlerPtr; -+ } v70SetupSpec; -+ struct -+ { -+ ulong ChannelId; -+ ulong LogChannelNum; -+ ulong PortNum; -+ } EstChannelSpec; -+ struct -+ { -+ ulong ChannelId; -+ } WaitChannelSpec; -+ struct -+ { -+ ulong ChannelId; -+ ulong LogChannelNum; -+ ulong PortNum; -+ ulong DLCI; -+ } RelChannelSpec; -+ struct -+ { -+ audioType type; -+ bitMap setup; -+ dataRateMap rxAudioRate; -+ dataRateMap txAudioRate; -+ rxAudioHandlerType rxAudioHandlerPtr; -+ txAudioHandlerType txAudioHandlerPtr; -+ } audioSpec; -+ struct -+ { -+ long code; -+ long value; -+ } v24Circuit; -+ struct -+ { -+ ulong code; -+ ulong value; -+ ulong minValue; -+ ulong maxValue; -+ } atRegister; -+ struct -+ { -+ long code; -+ uchar *response; -+ } atiSpec; -+ struct -+ { -+ long length; -+ uchar *framePtr; -+ } frameSpec; -+ struct -+ { -+ long code; -+ union -+ { -+ long value; -+ struct -+ { -+ long loFreq1; -+ long hiFreq1; -+ long loFreq2; -+ long hiFreq2; -+ } freqRange; -+ } params; -+ } callProgressParamSpec; -+ struct -+ { -+ v250IdStringCode v250IdCode; -+ uchar *v250IdString; -+ } v250IdSpec; -+ -+ } param; -+ } modemCommandStruct; -+ -+typedef Boolean (*commandHandlerType) (modemCommandStruct*); -+#endif /* ADSL_MODEM */ -+ -+ -+ -+/****************************************************************************/ -+/* 2. Constant definitions. */ -+/* */ -+/* 2.1 Definitive constants */ -+/****************************************************************************/ -+ -+#define kMaxSampleBlockSize 48 -+#define kMaxDataBlockSize 48 -+ -+#define kMaxDialStringLength 127 -+#define kCallProgressSampleRate 7200 -+ -+#define kMaxCallerIDMessageLength 80 -+ -+/****************************************************************************/ -+/* 2. Constant definitions. */ -+/* */ -+/* 2.2 Bit maps */ -+/****************************************************************************/ -+ -+/* modulationMap */ -+ -+#define kIdle 0x00000000 -+#define kV25 0x00000001 -+#define kV8 0x00000002 -+#define kCid 0x00000004 -+#define kV8bis 0x00000008 -+#define kV21 0x00000010 -+#define kV22 0x00000020 -+#define kV23 0x00000040 -+#define kV32 0x00000080 -+#define kV34 0x00000100 -+#define kX2 0x00000200 -+#define kV90 0x00000400 -+#define k56Flex 0x00000800 -+#define kV27 0x00001000 -+#define kV29 0x00002000 -+#define kV17 0x00004000 -+#define kV34HDX 0x00008000 -+#define kV34HDXC 0x00010000 -+#define kBell103 0x00100000 -+#define kBell212 0x00200000 -+#define kDataCallingTone 0x01000000 -+#define kFaxCallingTone 0x02000000 -+ -+#define kV22FastNZConnect 0x04000000 -+#define kV22FastNNZConnect 0x08000000 -+#define kV22FastConnect (kV22FastNZConnect|kV22FastNNZConnect) -+#define kV22bisFastConnect 0x10000000 -+ -+ -+#define kDataModulations (kV25 | kV8 | kV21 | kV22FastConnect | kV22bisFastConnect | kV22 | kV23 | kV32 | kV34 | kBell103 | kBell212) -+#define kDataOnlyModulations (kV21 | kV22 | kV23 | kV32 | kBell103 | kBell212) -+#define kPCMModulations (kV90 | kX2 | k56Flex) -+ -+#define kFaxModulations (kV25 | kV21 | kV27 | kV29 | kV17) -+#define kFaxOnlyModulations (kV27 | kV29 | kV17) -+#define kFaxModulationShift 12 -+ -+/* symbolRateMap */ -+ -+#define k1200Hz 0x00000001 -+#define k1600Hz 0x00000002 -+#define k2400Hz 0x00000004 -+#define k2743Hz 0x00000008 -+#define k2800Hz 0x00000010 -+#define k3000Hz 0x00000020 -+#define k3200Hz 0x00000040 -+#define k3429Hz 0x00000080 -+#define k8000Hz 0x00000100 -+ -+#define kAllSymbolRates ( k1200Hz | k1600Hz | k2400Hz | k2743Hz | \ -+ k2800Hz | k3000Hz | k3429Hz | k8000Hz ) -+ -+/* dataRateMap */ -+ -+#define k75bps 0x00000002 -+#define k300bps 0x00000004 -+#define k600bps 0x00000008 -+#define k1200bps 0x00000010 -+#define k2400bps 0x00000020 -+#define k4800bps 0x00000040 -+#define k7200bps 0x00000080 -+#define k9600bps 0x00000100 -+#define k12000bps 0x00000200 -+#define k14400bps 0x00000400 -+#define k16800bps 0x00000800 -+#define k19200bps 0x00001000 -+#define k21600bps 0x00002000 -+#define k24000bps 0x00004000 -+#define k26400bps 0x00008000 -+#define k28800bps 0x00010000 -+#define k31200bps 0x00020000 -+#define k33600bps 0x00040000 -+#define k36000bps 0x00080000 -+#define k38400bps 0x00100000 -+#define k57600bps 0x00200000 -+#define k115200bps 0x00400000 -+#define k230400bps 0x00800000 -+#define k460800bps 0x01000000 -+#define k921600bps 0x02000000 -+/* -+ * kPCMRate is used to identify that the reported rate is -+ * PCM modulation rate, and is only used for PCM modulation while -+ * reporting rate !!!! -+ */ -+#define kPCMRate 0x40000000 -+#define kPCMFlexRate 0x80000000 -+#define kAllDataRates 0x0FFFFFFF -+ -+/* rates specific for X2 and V.90 */ -+#define kPCM25333bps 0x00000001 -+#define kPCM26666bps 0x00000002 -+#define kPCM28000bps 0x00000004 -+#define kPCM29333bps 0x00000008 -+#define kPCM30666bps 0x00000010 -+#define kPCM32000bps 0x00000020 -+#define kPCM33333bps 0x00000040 -+#define kPCM34666bps 0x00000080 -+#define kPCM36000bps 0x00000100 -+#define kPCM37333bps 0x00000200 -+#define kPCM38666bps 0x00000400 -+#define kPCM40000bps 0x00000800 -+#define kPCM41333bps 0x00001000 -+#define kPCM42666bps 0x00002000 -+#define kPCM44000bps 0x00004000 -+#define kPCM45333bps 0x00008000 -+#define kPCM46666bps 0x00010000 -+#define kPCM48000bps 0x00020000 -+#define kPCM49333bps 0x00040000 -+#define kPCM50666bps 0x00080000 -+#define kPCM52000bps 0x00100000 -+#define kPCM53333bps 0x00200000 -+#define kPCM54666bps 0x00400000 -+#define kPCM56000bps 0x00800000 -+#define kPCM57333bps 0x01000000 -+ -+#define kV90ServerToClientDataRates \ -+ ( kPCM28000bps | kPCM29333bps | kPCM30666bps | \ -+ kPCM32000bps | kPCM33333bps | kPCM34666bps | \ -+ kPCM36000bps | kPCM37333bps | kPCM38666bps | \ -+ kPCM40000bps | kPCM41333bps | kPCM42666bps | \ -+ kPCM44000bps | kPCM45333bps | kPCM46666bps | \ -+ kPCM48000bps | kPCM49333bps | kPCM50666bps | \ -+ kPCM52000bps | kPCM53333bps | kPCM54666bps | \ -+ kPCM56000bps | kPCM57333bps ) -+ -+#define kV90ClientToServerDataRates \ -+ ( k4800bps | k7200bps | k9600bps | k12000bps | \ -+ k14400bps | k16800bps | k19200bps | k21600bps | \ -+ k24000bps | k26400bps | k28800bps | k31200bps | \ -+ k33600bps ) -+ -+ -+ -+#define kX2ServerToClientDataRates \ -+ ( kPCM25333bps | kPCM26666bps | kPCM28000bps | \ -+ kPCM29333bps | kPCM30666bps | kPCM32000bps | \ -+ kPCM33333bps | \ -+ kPCM34666bps | kPCM36000bps | kPCM37333bps | \ -+ kPCM38666bps | kPCM40000bps | kPCM41333bps | \ -+ kPCM42666bps | kPCM44000bps | kPCM45333bps | \ -+ kPCM46666bps | kPCM48000bps | kPCM49333bps | \ -+ kPCM50666bps | kPCM52000bps | kPCM53333bps | \ -+ kPCM54666bps | kPCM56000bps | kPCM57333bps ) -+#define kX2ClientToServerDataRates \ -+ ( k4800bps | k7200bps | k9600bps | k12000bps | k14400bps | \ -+ k16800bps | k19200bps | k21600bps | k24000bps | k26400bps | k28800bps | \ -+ k31200bps ) -+ -+ /* -+ Rates specific for Flex -+ */ -+#define kPCMFlex32000bps 0x00000001 -+#define kPCMFlex34000bps 0x00000002 -+#define kPCMFlex36000bps 0x00000004 -+#define kPCMFlex38000bps 0x00000008 -+#define kPCMFlex40000bps 0x00000010 -+#define kPCMFlex42000bps 0x00000020 -+#define kPCMFlex44000bps 0x00000040 -+#define kPCMFlex46000bps 0x00000080 -+#define kPCMFlex48000bps 0x00000100 -+#define kPCMFlex50000bps 0x00000200 -+#define kPCMFlex52000bps 0x00000400 -+#define kPCMFlex54000bps 0x00000800 -+#define kPCMFlex56000bps 0x00001000 -+#define kPCMFlex58000bps 0x00002000 -+#define kPCMFlex60000bps 0x00004000 -+ -+#define kFlexServerToClientDataRates \ -+ ( kPCMFlex32000bps | kPCMFlex34000bps | kPCMFlex36000bps | kPCMFlex38000bps | \ -+ kPCMFlex40000bps | kPCMFlex42000bps | kPCMFlex44000bps | kPCMFlex46000bps | \ -+ kPCMFlex48000bps | kPCMFlex50000bps | kPCMFlex52000bps | kPCMFlex52000bps | \ -+ kPCMFlex54000bps | kPCMFlex56000bps | kPCMFlex58000bps | kPCMFlex60000bps ) -+ -+#define kFlexClientToServerDataRates \ -+ ( k4800bps | k7200bps | k9600bps | k12000bps | \ -+ k14400bps | k16800bps | k19200bps | k21600bps | \ -+ k24000bps | k26400bps | k28800bps | k31200bps ) -+ -+ -+#define k2400BitShift 5 -+#define k4800BitShift 6 -+ -+#define kPCM28000bpsShift 2 -+ -+#define kV21Rates k300bps -+#define kV22Rates k1200bps -+#define kV22bisRates (k1200bps | k2400bps) -+#define kV23Rates (k75bps | k1200bps) -+#define kCidRates (k1200bps) -+#define kV32Rates (k4800bps | k9600bps) -+#define kV32bisRates (kV32Rates | k7200bps | k12000bps | k14400bps) -+#define kV32terboRates (kV32bisRates | k16800bps | k19200bps) -+#define kV34Rates ( k2400bps | k4800bps | k7200bps | k9600bps | k12000bps | k14400bps | \ -+ k16800bps | k19200bps | k21600bps | k24000bps | k26400bps | k28800bps | \ -+ k31200bps | k33600bps ) -+ -+#define kV27Rates (k2400bps | k4800bps) -+#define kV29Rates (k4800bps | k7200bps | k9600bps) -+#define kBell103Rates k300bps -+#define kBell212Rates k1200bps -+ -+ -+/* Demodulator capabilities */ -+#define kNeecEnabled 0x00000001 -+#define kPFeecEnabled 0x00000002 -+#define kIeecEnabled 0x00000004 -+#define kFeecEnabled 0x00000008 -+ -+#define kRapidEqualizerTraining 0x00000010 -+#define kRapidPECTraining 0x00000020 -+#define kRapidECTraining 0x00000040 -+#define kAutoLoadReductionEnabled 0x00000080 -+ -+#define kTimingTrackingEnabled 0x00000100 -+#define kPhaseLockedLoopEnabled 0x00000200 -+#define kFeecPhaseLockedLoopEnabled 0x00000400 -+#define kPhaseJitterTrackingEnabled 0x00000800 -+ -+#define kClockErrorTrackingEnabled 0x00001000 -+#define kFreqOffsetTrackingEnabled 0x00002000 -+#define kFeecFreqOffsetTrackingEnabled 0x00004000 -+ -+#define kShorterNeecEnabled 0x00008000 -+#define kShorterPFeecEnabled 0x00010000 -+#define kFrondEndHPFilterEnabled 0x00020000 -+#define kGainControlEnabled 0x00040000 -+#define kPhaseHitControlEnabled 0x00080000 -+#define kBandEdgeCorrectorEnabled 0x00100000 -+#define kDisableFaxFastClearDown 0x00200000 -+ -+#define kImdOffsetCompensationEnabled 0x00400000 -+ -+#define kV34ShortEqlLengthExtShift 23 -+#define kV34ShortEqlLengthExtMask (0x3< */ -+#define kSAM8bitSYNHuntDisabled 0 -+#define kSAM8bitSYNHuntEnabled ((ulong)1 << kSAMTransparentIdleTypeShift) -+#define kSAM16bitSYNHuntEnabled ((ulong)2 << kSAMTransparentIdleTypeShift) -+ -+/* */ -+#define kSAMSendFlagsOnIdle 0 -+#define kSAMSendMarksOnIdle ((ulong)1 << kSAMFramedIdleTypeShift) -+ -+/* */ -+#define kSAMAbortOnUnderrun 0 -+#define kSAMFlagsOnUnderrun ((ulong)1 << kSAMFramedOverrunActionShift) -+ -+/* */ -+#define kSAMHalfDuplexNoAuto 0 -+#define kSAMHalfDuplexAuto ((ulong)1 << kSAMHalfDuplexModeShift) -+ -+ -+/* */ -+#define kSAMNoCRC 0 -+#define kSAM16bitCRC ((ulong)1 << kSAMCRCTypeShift) -+#define kSAM32bitCRC ((ulong)2 << kSAMCRCTypeShift) -+ -+/* */ -+#define kSAMNRZIDisabled 0 -+#define kSAMNRZIEnabled ((ulong)1 << kSAMNRZIEnabledShift) -+ -+ -+/* LAPM setup maps */ -+#define kLapmDirection 0x00000001 /* Bit 0 */ -+#define kLapmSREJEnabled 0x00000002 /* Bit 1 */ -+#define kLapmDetectionEnabled 0x00000004 /* Bit 2 */ -+#define kLapmLongADPEnabled 0x00000008 /* Bit 3 */ -+ -+#define kLapmCompressionEnabledMask 0x00000030 -+#define kLapmTxCompressionEnabled 0x00000010 /* Bit 4 */ -+#define kLapmRxCompressionEnabled 0x00000020 /* Bit 5 */ -+#define kLapmCompressionEnabledShift 4 -+ -+#define kLapmRetryLimitMask 0x000000C0 /* Bits 6,7 */ -+ -+#define kLapmNoRetryLimit 0x00000000 -+#define kLapm4Retries 0x00000040 -+#define kLapm8Retries 0x00000080 -+#define kLapm20Retries 0x000000C0 -+ -+#define kLapmWindowSizeMask 0x00001F00 /* Bits 8-12 */ -+#define kLapmWindowSizeShift 8 -+ -+#define kLapmWindowSize8 0x00000800 -+#define kLapmWindowSize15 0x00000F00 -+ -+ -+#define kLapmInfoFieldSizeMask 0x0000E000 /* Bits 13-15 */ -+#define kLapmInfoField8Bytes 0x00000000 -+#define kLapmInfoField16Bytes 0x00002000 -+#define kLapmInfoField32Bytes 0x00004000 -+#define kLapmInfoField64Bytes 0x00006000 -+#define kLapmInfoField128Bytes 0x00008000 -+#define kLapmInfoField192Bytes 0x0000A000 -+#define kLapmInfoField256Bytes 0x0000C000 -+#define kLapmInfoField512Bytes 0x0000E000 -+#define kLapmInfoFieldSizeShift 13 -+ -+#define kLapmT400Mask 0x00030000 /* Bits 16-17 */ -+#define kLapmAutoT400 0x00000000 -+#define kLapm750msT400 0x00010000 -+#define kLapm3secT400 0x00020000 -+#define kLapm30secT400 0x00030000 -+ -+#define kLapmT401Mask 0x000C0000 /* Bits 18-19 */ -+#define kLapmAutoT401 0x00000000 -+#define kLapm750msT401 0x00040000 -+#define kLapm3secT401 0x00080000 -+#define kLapm6secT401 0x000C0000 -+ -+#define kLapmT403Mask 0x00300000 /* Bits 20-21 */ -+#define kLapmAutoT403 0x00000000 -+#define kLapm750msT403 0x00100000 -+#define kLapm2secT403 0x00200000 -+#define kLapm4secT403 0x00300000 -+ -+ -+ -+#define kLapmDictSizeMask 0x00C00000 /* Bits 22-23 */ -+#define kLapmDictSize512 0x00000000 -+#define kLapmDictSize1024 0x00400000 -+#define kLapmDictSize2048 0x00800000 -+#define kLapmDictSize4096 0x00C00000 -+ -+#define kLapmStringSizeMask 0xFF000000 /* Bits 24-31 */ -+#define kLapmStringSizeShift 24 -+ -+/* MNP setup maps */ -+ -+#define kMnpMinPLevel 0x00000001 /* Bit 0: 1 - Minimal, 0 - Standard */ -+#define kMnpStdPLevel 0x00000000 /* Bit 0: 1 - Minimal, 0 - Standard */ -+ -+#define kMnpOptimizationEnabled 0x00000002 /* Bit 1 */ -+#define kMnpOptimizationDisabled 0x00000000 /* Bit 1 */ -+ -+#define kMnpCompressionEnabled 0x00000004 /* Bit 2 */ -+#define kMnpCompressionDisabled 0x00000000 /* Bit 2 */ -+ -+#define kMnpClassMask 0x00000018 -+#define kMnpClassShift 3 -+#define kMnpClass1 0x00000008 -+#define kMnpClass2 0x00000010 -+#define kMnpClass3 0x00000018 /* Bits 3,4 */ -+ -+#define kMnpMaxRetryMask 0x00000060 /* Bits 5,6 */ -+#define kMnpMaxRetryShift 5 -+#define kMnpNoRetryLimit 0x00000000 -+#define kMnp4Retries 0x00000020 -+#define kMnp8Retries 0x00000040 -+#define kMnp20Retries 0x00000060 -+ -+#define kMnpInfoFieldSizeMask 0x00000380 /* Bits 7-9 */ -+#define kMnpInfoFieldSizeShift 7 -+#define kMnpInfoField8Bytes 0x00000000 -+#define kMnpInfoField16Bytes 0x00000080 -+#define kMnpInfoField32Bytes 0x00000100 -+#define kMnpInfoField64Bytes 0x00000180 -+#define kMnpInfoField128Bytes 0x00000200 -+#define kMnpInfoField192Bytes 0x00000280 -+#define kMnpInfoField256Bytes 0x00000300 -+#define kMnpInfoField260Bytes 0x00000380 -+ -+#define kMnpT400Mask 0x00003000 /* Bits 12,13 */ -+#define kMnpT400Shift 12 -+#define kMnpAutoT400 0x00000000 -+#define kMnp750msT400 0x00001000 -+#define kMnp3secT400 0x00002000 -+#define kMnp6secT400 0x00003000 -+ -+#define kMnpT401Mask 0x0000C000 /* Bits 14,15 */ -+#define kMnpT401Shift 14 -+#define kMnpAutoT401 0x00000000 -+#define kMnp750msT401 0x00004000 -+#define kMnp3secT401 0x00008000 -+#define kMnp6secT401 0x0000C000 -+ -+#define kMnpT403Mask 0x00030000 /* Bits 16,17 */ -+#define kMnpT403Shift 16 -+#define kMnpAutoT403 0x00000000 -+#define kMnp60secT403 0x00010000 -+#define kMnp600secT403 0x00020000 -+#define kMnp3600secT403 0x00030000 -+ -+#define kMnpFallbackTypeMask 0x000C0000 /* Bits 18,19 */ -+#define kMnpFallbackTypeShift 18 -+#define kMnpNoFallback 0x00000000 -+#define kMnpFallbackTime 0x00040000 -+#define kMnpFallback200 0x00080000 -+#define kMnpFallbackChar 0x000C0000 -+ -+#define kMnpWindowSizeMask 0x00300000 /* Bits 20,21 */ -+#define kMnpWindowSizeShift 20 -+#define kMnp1Frame 0x00000000 -+#define kMnp4Frames 0x00100000 -+#define kMnp8Frames 0x00200000 -+#define kMnp16Frames 0x00300000 -+ -+#define kMnpDirection 0x00800000 /* Bit 22 */ -+ -+#define kMnpFallbackCharMask 0xFF000000 /* Bit 24-31 */ -+#define kMnpFallbackCharShift 24 -+ -+/* kV34HDXTurnOffCurrentModeCmd state parameter values */ -+ -+#define kV34HDXTurnOffAsClearDown 0 -+#define kV34HDXTurnOffFromControlSource 1 -+#define kV34HDXTurnOffFromControlDestination 2 -+#define kV34HDXTurnOffFromPrimarySource 3 -+#define kV34HDXTurnOffFromPrimaryDestination 4 -+ -+/* V70 setup maps */ -+ -+#define kV70Direction 0x00000001 /* Bit 0 */ -+#define kV70uIHEnabled 0x00000002 /* Bit 1 */ -+#define kV70AudioHeaderEnabled 0x00000004 /* Bit 2 */ -+#define kV70SilenceSupprEnabled 0x00000008 /* Bit 3 */ -+ -+#define kV70SuspendResumeShift 4 -+#define kV70SuspendResumeMask (3 << kV70SuspendResumeShift) -+#define kV70SuspendResumeDisabled 0x00000000 /* Bit 4,5 */ -+#define kV70SuspendResumeWAddr 0x00000010 /* Bit 4 */ -+#define kV70SuspendResumeWoAddr 0x00000020 /* Bit 5 */ -+ -+#define kV70CrcLengthShift 6 -+#define kV70CrcLengthMask (3 << kV70CrcLengthShift) -+#define kV70CrcLength16 0x00000000 /* Bit 6,7 */ -+#define kV70CrcLength8 0x00000040 /* Bit 6 */ -+#define kV70CrcLength32 0x00000080 /* Bit 7 */ -+ -+#define kV70BlockingFactorShift 8 -+#define kV70BlockingFactorMask (3 << kV70BlockingFactorShift) -+#define kV70BlockingFactor1 0x00000000 /* Bit 8,9 */ -+#define kV70BlockingFactor2 0x00000100 /* Bit 8 */ -+#define kV70BlockingFactor3 0x00000200 /* Bit 9 */ -+#define kV70BlockingFactor4 0x00000300 /* Bit 8,9 */ -+ -+#define kV70InitChannelsShift 10 -+#define kV70InitChannelsMask (1 << kV70InitChannelsShift) -+#define kV70InitNoChannels 0x00000000 /* Bit 10,11 */ -+#define kV70InitDataChannel 0x00000400 /* Bit 10,11 */ -+#define kV70InitAudioChannel 0x00000800 /* Bit 10,11 */ -+#define kV70InitBothChannels 0x00000C00 /* Bit 10,11 */ -+ -+#define kV70OOBEnabled 0x00001000 /* Bit 12 */ -+ -+/* V80 setup maps */ -+ -+#define kV80Direction 0x00000001 /* Bit 0 */ -+ -+#define kV80ModeShift 1 -+#define kV80ModeMask (3 << kV80ModeShift) -+#define kV80SyncMode (0 << kV80ModeShift) -+#define kV80TunnellingMode (1 << kV80ModeShift) -+#define kV80SamMode (2 << kV80ModeShift) -+#define kV80SamTransparentMode (2 << kV80ModeShift) -+#define kV80SamFramedMode (3 << kV80ModeShift) -+ -+#define kV80TransIdleShift 3 -+#define kV80TransIdleMask (3 << kV80TransIdleShift) -+#define kV80TransIdleNoHunt (0 << kV80TransIdleShift) -+#define kV80TransIdleHunt8 (1 << kV80TransIdleShift) -+#define kV80TransIdleHunt16 (2 << kV80TransIdleShift) -+ -+#define kV80FrameIdleShift 5 -+#define kV80FrameIdleMask (1 << kV80FrameIdleShift) -+#define kV80FrameIdleFlags (0 << kV80FrameIdleShift) -+#define kV80FrameIdleMarks (1 << kV80FrameIdleShift) -+ -+#define kV80FrameUnOvShift 6 -+#define kV80FrameUnOvMask (1 << kV80FrameUnOvShift) -+#define kV80FrameUnOvAbort (0 << kV80FrameUnOvShift) -+#define kV80FrameUnOvFlag (1 << kV80FrameUnOvShift) -+ -+#define kV80HdAutoShift 7 -+#define kV80HdAutoMask (1 << kV80HdAutoShift) -+#define kV80HdAutoNormal (0 << kV80HdAutoShift) -+#define kV80HdAutoExtended (1 << kV80HdAutoShift) -+ -+#define kV80CrcTypeShift 8 -+#define kV80CrcTypeMask (3 << kV80CrcTypeShift) -+#define kV80NoCrc (0 << kV80CrcTypeShift) -+#define kV80Crc16 (1 << kV80CrcTypeShift) -+#define kV80Crc32 (2 << kV80CrcTypeShift) -+ -+#define kV80NrziShift 10 -+#define kV80NrziMask (1 << kV80NrziShift) -+#define kV80NrziDisabled (0 << kV80NrziShift) -+#define kV80NrziEnabled (1 << kV80NrziShift) -+ -+#define kV80Syn1Mask 0x00FF0000 /* Bit 16-23 */ -+#define kV80Syn1Shift 16 -+#define kV80Syn2Mask 0xFF000000 /* Bit 24-31 */ -+#define kV80Syn2Shift 24 -+ -+/* kStartCallProgressMonitorCmd setup masks */ -+ -+#define kDTMFDetectorDebouncerEnabled 0x0001 -+#define kModemSignalDetectorDebouncerEnabled 0x0002 -+#define kCallProgressDetectorDebouncerEnabled 0x0004 -+#define kCustomSignalDebouncerEnabled 0x0008 -+#define kFaxCallingToneSuppressionEnabled 0x0010 -+#define kDataCallingToneSuppressionEnabled 0x0020 -+#define kCISuppressionEnabled 0x0040 -+#define kAnsSuppressionEnabled 0x0080 -+ -+/* kDialCmd setup masks (dialerSetup bit fields) */ -+ -+#define kDTMFDialingEnabled 0x0001 -+#define kPulseDialingEnabled 0x0002 -+#define kModeSwitchEnabled 0x0004 -+#define kBlindDialingEnabled 0x0008 -+#define kPulseDialingMethodMask 0x0030 -+#define kDialModifierTranslationMask 0x00C0 -+#define kFlashWhilePulseDialingEnabled 0x0100 -+ -+/* Pulse dialing method */ -+#define kPulseDialingNPulsesPerDigit 0x0000 -+#define kPulseDialingNplusOnePulsesPerDigit 0x0010 -+#define kPulseDialingTenMinusNPulsesPerDigit 0x0020 -+ -+/* Dial modifier translation */ -+#define kTreatWasPause 0x0040 /* Tread 'W' modifier as pause */ -+#define kTreatCommaAsWaitForDialtone 0x0080 -+ -+#ifdef TI_C6X -+#include "C6xDefs.h" -+#endif -+#ifdef PENTIUM_MMX -+#include "PentiumDefs.h" -+#endif -+ -+ -+#if defined(DSP16K) && !defined(SoftModemGlobals) -+/* ensure that code generator does not use r5 */ -+register int *softmodem_h_should_not_be_included_after_softmodem_gh asm("r5"); -+#endif -+ -+/****************************************************************************/ -+/* 3. Interface functions. */ -+/* */ -+/****************************************************************************/ -+ -+#ifdef ADSL_MODEM -+ -+#ifndef SoftDslHeader -+#include "SoftDsl.h" -+#endif -+extern char* SM_DECL SoftModemGetRevString(void); -+extern char* SM_DECL SoftModemGetProductName(void); -+extern char* SM_DECL SoftModemGetBuildDate(void); -+extern char* SM_DECL SoftModemGetFullManufacturerName(void); -+extern char* SM_DECL SoftModemGetShortManufacturerName(void); -+extern int SM_DECL SoftModemRevStringSize(void); -+extern char* SM_DECL SoftModemGetVendorIDString(void); -+extern char* SM_DECL SoftModemGetT1413VendorIDString(void); -+extern char* SM_DECL SoftModemGetSerialNumberString(void); -+extern int SM_DECL SoftModemSerNumStringSize(void); -+#define SoftDslGetProductName SoftModemGetProductName -+#define SoftDslGetBuildDate SoftModemGetBuildDate -+#define SoftDslGetFullManufacturerName SoftModemGetFullManufacturerName -+#define SoftDslGetShortManufacturerName SoftModemGetShortManufacturerName -+ -+#else /* !ADSL_MODEM */ -+ -+extern void SM_DECL SoftModemSetMemoryPtr (void *varsPtr); -+extern void* SM_DECL SoftModemGetMemoryPtr (void); -+extern void SM_DECL SoftModemSetRefData (void *varsPtr); -+extern void* SM_DECL SoftModemGetRefData (void); -+extern int SM_DECL SoftModemGetMemorySize (void); -+extern void SM_DECL SoftModemInit (void); -+extern void SM_DECL SoftModemReset (void); -+extern void SM_DECL SoftModemLineHandler (int sampleCount, short *srcPtr, short *dstPtr); -+extern void SM_DECL SoftModemTimer (long timeQ24ms); -+extern Boolean SM_DECL SoftModemCommandHandler (modemCommandStruct *cmdPtr); -+extern int SM_DECL SoftModemGetExternalMemorySize(void); -+extern void SM_DECL SoftModemSetExternalMemoryPtr(void *varsPtr); -+ -+extern void SM_DECL SoftModemSetPcmCoding (pcmCodingType pcmCoding); -+extern void SM_DECL SoftModemPcmLineHandler (int sampleCount, uchar *srcPtr, uchar *dstPtr); -+ -+/* SoftModem IO functions */ -+extern int SM_DECL SoftModemWrite(int nBytes, uchar* srcPtr); -+extern int SM_DECL SoftModemRead(int nBytes, uchar* dstPtr); -+extern int SM_DECL SoftModemWriteFrame(int nBytes, uchar* srcPtr); -+extern int SM_DECL SoftModemReadFrame(int maxFrameSize, uchar* dstPtr); -+extern int SM_DECL SoftModemCountWritePending(void); -+extern int SM_DECL SoftModemCountReadPending(void); -+extern int SM_DECL SoftModemWriteSpaceAvailable(void); -+extern void SM_DECL SoftModemWriteFlush(void); -+extern void SM_DECL SoftModemReadFlush(void); -+extern int SM_DECL SoftModemGetWriteBufferSize(void); -+extern int SM_DECL SoftModemGetReadBufferSize(void); -+ -+#ifdef AUDIO -+extern int SM_DECL SoftModemAudioHandler(int sampleCount, short *srcPtr, short *dstPtr); -+extern int SM_DECL SoftModemAudioRxDataHandler(int nBytes, uchar* srcPtr); -+extern int SM_DECL SoftModemAudioTxDataHandler(int nBytes, uchar* dstPtr); -+#endif -+ -+ -+#define SoftModemSetGlobalPtr SoftModemSetMemoryPtr -+#define SoftModem SoftModemLineHandler -+#ifndef LINKLAYER_V42BIS_LARGE_DICTIONARY -+#define kSoftModemMaxMemorySize (65536) -+#else -+#define kSoftModemMaxMemorySize (65536 + 8192) -+#endif -+ -+/* -+ * Internal functions -+ */ -+extern long SM_DECL SoftModemGetDCOffset(void); -+extern void SM_DECL SoftModemDisableDCOffsetTracking(void); -+extern void SM_DECL SoftModemEnableDCOffsetTracking(void); -+extern long SM_DECL SoftModemGetRcvPower(void); -+extern ulong SM_DECL SoftModemGetHybridDelay(void); -+extern void SM_DECL SoftModemStatusHandler (modemStatusStruct *status); -+extern Boolean SM_DECL SoftModemInternalCommandHandler (modemCommandStruct *cmdPtr); -+extern void SM_DECL SoftModemInternalStatusHandler (modemStatusStruct *status); -+extern void SM_DECL SoftModemSetControllerOnlyMode(commandHandlerType externalDataPumpCommandHandlerPtr); -+extern char* SM_DECL SoftModemGetRevString(void); -+extern char* SM_DECL SoftModemGetProductName(void); -+extern char* SM_DECL SoftModemGetBuildDate(void); -+extern char* SM_DECL SoftModemGetFullManufacturerName(void); -+extern char* SM_DECL SoftModemGetShortManufacturerName(void); -+extern int SM_DECL SoftModemRevStringSize(void); -+extern char* SM_DECL SoftModemGetVendorIDString(void); -+extern char* SM_DECL SoftModemGetSerialNumberString(void); -+extern void SM_DECL SoftModemAuxTxDataHandler(int nBytes, uchar *dataPtr); -+extern void SM_DECL SoftModemAuxRxDataHandler(int nBytes, uchar *dataPtr); -+extern void SM_DECL SoftModemTxDataHandler(int nBytes, uchar *dataPtr); -+extern void SM_DECL SoftModemRxDataHandler(int nBytes, uchar *dataPtr); -+extern void SM_DECL SoftModemATPrintf(uchar *format, void *arg1, void *arg2, void *arg3); -+ -+#define SoftModemSetInputSaturationLimit(limit) (gSystemVars.inputSignalLimit = limit) -+#define SoftModemResetInputSaturationLimit() (gSystemVars.inputSignalLimit = 0) -+ -+#endif /* !ADSL_MODEM */ -+ -+#endif /* SoftModemPh */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftModemTypes.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftModemTypes.h ---- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftModemTypes.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftModemTypes.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,292 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * SoftModemTypes.h -+ * -+ * -+ * Description: -+ * This file contains some of the type declarations for SoftModem -+ * -+ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved. -+ * Authors: Mark Gonikberg, Haixiang Liang. -+ * -+ * $Revision: 1.9 $ -+ * -+ * $Id: SoftModemTypes.h,v 1.9 2004/04/13 00:16:59 ilyas Exp $ -+ * -+ * $Log: SoftModemTypes.h,v $ -+ * Revision 1.9 2004/04/13 00:16:59 ilyas -+ * Merged the latest ADSL driver changes -+ * -+ * Revision 1.8 2004/01/24 01:35:33 ytan -+ * add multi-section lmem swap -+ * -+ * Revision 1.7 2001/09/21 19:19:01 ilyas -+ * Minor fixes for VxWorks build -+ * -+ * Revision 1.6 2001/08/16 02:16:39 khp -+ * - added definitions for SLOW_DATA and FAST_TEXT, defined to nothing -+ * except when bcm47xx && USE_SLOW_DATA or USE_FAST_TEXT. Any function -+ * that needs to run fast should be marked with FAST_TEXT. Any data that -+ * is not referenced often should be marked with SLOW_DATA. -+ * -+ * Revision 1.5 2001/03/30 00:49:59 liang -+ * Changed warning output message. -+ * -+ * Revision 1.4 2000/06/21 22:24:40 yongbing -+ * Modify WARN micro to limit the number of same warnings printed -+ * -+ * Revision 1.3 1999/08/05 20:02:13 liang -+ * Merged with the softmodem top of the tree on 08/04/99. -+ * -+ * Revision 1.2 1999/01/27 22:14:29 liang -+ * Merge with SoftModem_3_1_02. -+ * -+ * Revision 1.19 1998/11/17 04:02:39 yura -+ * Fixed WARN and ASSERT redefinition warning for WinNT targets -+ * -+ * Revision 1.18 1998/08/26 19:20:43 scott -+ * Commented out EXCLUDE_CYGWIN32_TYPES define -+ * -+ * Revision 1.17 1998/08/13 19:03:06 scott -+ * Added BitField definition and INT_IS_LONG -+ * -+ * Revision 1.16 1998/08/08 03:39:55 scott -+ * The DEBUG_PTR_ENABLED macro can be used to enable only the DEBUG_PTR macros -+ * -+ * Revision 1.15 1998/07/28 22:21:31 mwg -+ * Fixed problems with NULL & nil being defined incorrectly -+ * -+ * Revision 1.14 1998/07/08 17:09:17 scott -+ * Define ASSERT and WARN only if not already defined -+ * -+ * Revision 1.13 1998/07/02 20:46:34 scott -+ * Added workaround for building certain builds with older SunOS -+ * -+ * Revision 1.12 1998/02/09 18:24:49 scott -+ * Defined "Private" as nothing for GreenHill (to prevent erroneous section -+ * allocations for data) -+ * -+ * Revision 1.11 1997/08/29 21:39:24 scott -+ * Added check for LONG_IS_INT define (for TI C6X support) -+ * -+ * Revision 1.10 1997/05/29 19:50:23 mwg -+ * Added code to avoid type redefintions under SunOS. -+ * -+ * Revision 1.9 1997/03/19 18:35:08 mwg -+ * Changed copyright notice. -+ * -+ * Revision 1.8 1997/02/11 00:05:53 mwg -+ * Minor adjustments for Pentium optimization. -+ * -+ * Revision 1.7 1997/01/11 01:30:47 mwg -+ * Added new macro WARN -- the same as ASSERT but without exit. -+ * -+ * Revision 1.6 1996/08/22 20:07:39 liang -+ * When ASSERT fires, only print out information, don't exit. -+ * -+ * Revision 1.5 1996/05/06 06:49:10 mwg -+ * Fixed linux problems. -+ * -+ * Revision 1.4 1996/05/02 08:40:16 mwg -+ * Merged in Chromatic bug fixes. -+ * -+ * Revision 1.3 1996/04/01 20:59:53 mwg -+ * Added macros to setup and use debug pointer. -+ * -+ * Revision 1.2 1996/02/27 01:50:04 mwg -+ * Added ASSERT() macro. -+ * -+ * Revision 1.1.1.1 1996/02/14 02:35:13 mwg -+ * Redesigned the project directory structure. Merged V.34 into the project. -+ * -+ * Revision 1.2 1995/12/03 06:59:31 mwg -+ * Fixed all gcc varnings. We are now running under Linux on a PC! -+ * -+ *****************************************************************************/ -+#ifndef SoftModemTypesh -+#define SoftModemTypesh -+ -+#ifdef LONG_SHORTS -+#define short long -+#define ushort unsigned long -+#endif -+ -+typedef signed char schar; -+typedef unsigned char uchar; -+ -+#if 0 /* This is not currently required */ -+#if defined(_CYGWIN32) && defined(DEBUG) -+#define EXCLUDE_CYGWIN32_TYPES -+#endif -+#endif -+ -+#if !defined(_SYS_TYPES_H) || !defined(TARG_OS_RTEMS) -+#if defined(_CFE_) -+ typedef unsigned int uint; -+ typedef unsigned long ulong; -+ typedef unsigned short ushort; -+#elif defined(TARG_OS_RTEMS) -+#if defined(HOST_ARCH_LINUX) -+ typedef unsigned int uint; -+#endif -+ typedef unsigned long ulong; -+#if defined(HOST_ARCH_LINUX) -+ typedef unsigned short ushort; -+#endif -+#elif defined(EXCLUDE_CYGWIN32_TYPES) || (!defined _NO_TYPE_DEFS_ && !defined _SYS_TYPES_H && !defined __SYS_TYPES_H__ && !defined _SYS_BSD_TYPES_H && !defined _LINUX_TYPES_H) || defined(__sparc__) -+#ifndef EXCLUDE_CYGWIN32_TYPES -+ typedef unsigned int uint; -+#endif -+#ifndef _LINUX_TYPES_H -+ typedef unsigned long ulong; -+#endif -+#if !defined(ushort) && !defined(EXCLUDE_CYGWIN32_TYPES) && !defined(__INCvxTypesOldh) -+ typedef unsigned short ushort; -+#endif -+#endif -+#else -+typedef unsigned long ulong; -+#endif -+ -+#if defined(GREENHILL) || defined(GNUTX39) /* GH allocates private data to incorrect section */ -+#define Private -+#else -+#define Private static -+#endif -+ -+#define Public -+ -+#ifdef NULL -+#undef NULL -+#endif -+#ifdef nil -+#undef nil -+#endif -+ -+#define NULL 0 -+#define nil 0 -+ -+#define false 0 -+#define true 1 -+typedef unsigned char Boolean; -+typedef unsigned int BitField; /* this must occur BEFORE long_is_int/int_is_long defs */ -+ -+#ifdef LONG_IS_INT -+#define long int -+#define ulong uint -+#endif -+ -+#ifdef INT_IS_LONG -+#define int long -+#define uint ulong -+#endif -+ -+#define POSTULATE(postulate) \ -+ do \ -+ { \ -+ typedef struct \ -+ { \ -+ char NegativeSizeIfPostulateFalse[((int)(postulate))*2 - 1]; \ -+ } PostulateCheckStruct; \ -+ } \ -+ while (0) -+ -+#if defined(DEBUG) && !defined(__KERNEL__) -+#ifndef WARN -+#define kDSLNumberWarnTimes 10 -+#define WARN(assertion) \ -+ { static int warnSeveralTimes=0; \ -+ if ((!(assertion))&(warnSeveralTimes -+*/ -+/***********************************************************************/ -+/* */ -+/* MODULE: 6338_common.h */ -+/* DATE: 05/10/04 */ -+/* PURPOSE: Define addresses of major hardware components of */ -+/* BCM6338 */ -+/* */ -+/***********************************************************************/ -+#ifndef __BCM6338_MAP_COMMON_H -+#define __BCM6338_MAP_COMMON_H -+ -+#if __cplusplus -+extern "C" { -+#endif -+ -+#define PERF_BASE 0xfffe0000 /* chip control registers */ -+#define BB_BASE 0xfffe0100 /* bus bridge registers */ -+#define TIMR_BASE 0xfffe0200 /* timer registers */ -+#define UART_BASE 0xfffe0300 /* uart registers */ -+#define GPIO_BASE 0xfffe0400 /* gpio registers */ -+#define SPI_BASE 0xfffe0c00 /* SPI master controller registers */ -+ -+#define ADSL_BASE 0xfffe1000 /* ADSL core control registers */ -+#define ATM_BASE 0xfffe2000 /* ATM SAR control registers */ -+#define EMAC_DMA_BASE 0xfffe2400 /* EMAC DMA control registers */ -+#define USB_DMA_BASE 0xfffe2400 /* USB DMA control registers */ -+#define EMAC1_BASE 0xfffe2800 /* EMAC1 control registers */ -+#define USB_CTL_BASE 0xfffe3000 /* USB control registers */ -+#define SDRAM_BASE 0xfffe3100 /* SDRAM control registers */ -+ -+ -+/* -+##################################################################### -+# System PLL Control Register -+##################################################################### -+*/ -+ -+#define SOFT_RESET 0x00000001 -+ -+/* -+##################################################################### -+# SDRAM Control Registers -+##################################################################### -+*/ -+#define SDR_INIT_CTL 0x00 -+ /* Control Bits */ -+#define SDR_PFEN1 (1<<16) -+#define SDR_PFEN0 (1<<15) -+#define SDR_EMPRS (1<<14) -+#define SDR_2_BANKS (1<<13) -+#define SDR_1_BANK (0<<13) -+#define SDR_CS1_EN (1<<12) -+#define SDR_PEND (1<<11) -+#define SDR_32_BIT (1<<10) -+#define SDR_POWER_DOWN (1<<9) -+#define SDR_SELF_REFRESH (1<<8) -+#define SDR_11_COLS (3<<6) -+#define SDR_10_COLS (2<<6) -+#define SDR_9_COLS (1<<6) -+#define SDR_8_COLS (0<<6) -+#define SDR_13_ROWS (2<<4) -+#define SDR_12_ROWS (1<<4) -+#define SDR_11_ROWS (0<<4) -+#define SDR_MASTER_EN (1<<3) -+#define SDR_MRS_CMD (1<<2) -+#define SDR_PRE_CMD (1<<1) -+#define SDR_CBR_CMD (1<<0) -+ -+#define SDR_CFG_REG 0x04 -+ /* Control Bits */ -+#define SDR_FULL_PG 0 -+#define SDR_BURST8 1 -+#define SDR_BURST4 2 -+#define SDR_BURST2 3 -+#define SDR_FAST_MEM (1<<2) -+#define SDR_SLOW_MEM (0<<2) -+ -+#define SDR_REF_CTL 0x0C -+ /* Control Bits */ -+#define SDR_REF_EN (1<<15) -+ -+#define SDR_PRIOR -+ /* Control Bits */ -+#define SDR_EN_PRIOR (1<<31) -+ -+ -+/* -+##################################################################### -+# MPI Control Registers -+##################################################################### -+*/ -+#define CS0BASE 0x00 -+#define CS0CNTL 0x04 -+ -+/* -+# CSxBASE settings -+# Size in low 4 bits -+# Base Address for match in upper 24 bits -+*/ -+#define EBI_SIZE_8K 0 -+#define EBI_SIZE_16K 1 -+#define EBI_SIZE_32K 2 -+#define EBI_SIZE_64K 3 -+#define EBI_SIZE_128K 4 -+#define EBI_SIZE_256K 5 -+#define EBI_SIZE_512K 6 -+#define EBI_SIZE_1M 7 -+#define EBI_SIZE_2M 8 -+#define EBI_SIZE_4M 9 -+#define EBI_SIZE_8M 10 -+#define EBI_SIZE_16M 11 -+#define EBI_SIZE_32M 12 -+#define EBI_SIZE_64M 13 -+#define EBI_SIZE_128M 14 -+#define EBI_SIZE_256M 15 -+ -+/* CSxCNTL settings */ -+#define EBI_ENABLE 0x00000001 /* .. enable this range */ -+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ -+#define ZEROWT 0x00000000 /* .. 0 WS */ -+#define ONEWT 0x00000002 /* .. 1 WS */ -+#define TWOWT 0x00000004 /* .. 2 WS */ -+#define THREEWT 0x00000006 /* .. 3 WS */ -+#define FOURWT 0x00000008 /* .. 4 WS */ -+#define FIVEWT 0x0000000a /* .. 5 WS */ -+#define SIXWT 0x0000000c /* .. 6 WS */ -+#define SEVENWT 0x0000000e /* .. 7 WS */ -+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ -+#define EBI_POLARITY 0x00000040 /* .. set to invert chip select polarity */ -+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ -+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ -+#define EBI_FIFO 0x00000200 /* .. enable fifo */ -+#define EBI_RE 0x00000400 /* .. Reverse Endian */ -+ -+/* -+##################################################################### -+# UART Control Registers -+##################################################################### -+*/ -+#define UART0CONTROL 0x01 -+#define UART0CONFIG 0x02 -+#define UART0RXTIMEOUT 0x03 -+#define UART0BAUD 0x04 -+#define UART0FIFOCFG 0x0a -+#define UART0INTMASK 0x10 -+#define UART0INTSTAT 0x12 -+#define UART0DATA 0x17 -+ -+#define BRGEN 0x80 /* Control register bit defs */ -+#define TXEN 0x40 -+#define RXEN 0x20 -+#define LOOPBK 0x10 -+#define TXPARITYEN 0x08 -+#define TXPARITYEVEN 0x04 -+#define RXPARITYEN 0x02 -+#define RXPARITYEVEN 0x01 -+ -+#define XMITBREAK 0x40 /* Config register */ -+#define BITS5SYM 0x00 -+#define BITS6SYM 0x10 -+#define BITS7SYM 0x20 -+#define BITS8SYM 0x30 -+#define ONESTOP 0x07 -+#define TWOSTOP 0x0f -+ -+#define RSTTXFIFOS 0x80 /* Rx Timeout register */ -+#define RSTRXFIFOS 0x40 -+ -+#define TX4 0x40 /* FIFO config register */ -+#define RX4 0x04 -+ -+#define DELTAIP 0x0001 /* Interrupt Status and Mask registers */ -+#define TXUNDERR 0x0002 -+#define TXOVFERR 0x0004 -+#define TXFIFOTHOLD 0x0008 -+#define TXREADLATCH 0x0010 -+#define TXFIFOEMT 0x0020 -+#define RXUNDERR 0x0040 -+#define RXOVFERR 0x0080 -+#define RXTIMEOUT 0x0100 -+#define RXFIFOFULL 0x0200 -+#define RXFIFOTHOLD 0x0400 -+#define RXFIFONE 0x0800 -+#define RXFRAMERR 0x1000 -+#define RXPARERR 0x2000 -+#define RXBRK 0x4000 -+ -+#if __cplusplus -+} -+#endif -+ -+#endif -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6338_map.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6338_map.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6338_map.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6338_map.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,885 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/***********************************************************************/ -+/* */ -+/* MODULE: 6338_map.h */ -+/* DATE: 05/10/04 */ -+/* PURPOSE: Define addresses of major hardware components of */ -+/* BCM6338 */ -+/* */ -+/***********************************************************************/ -+#ifndef __BCM6338_MAP_H -+#define __BCM6338_MAP_H -+ -+#if __cplusplus -+extern "C" { -+#endif -+ -+#include "bcmtypes.h" -+#include "6338_common.h" -+#include "6338_intr.h" -+ -+/* macro to convert logical data addresses to physical */ -+/* DMA hardware must see physical address */ -+#define LtoP( x ) ( (uint32)x & 0x1fffffff ) -+#define PtoL( x ) ( LtoP(x) | 0xa0000000 ) -+ -+/* -+** Interrupt Controller -+*/ -+typedef struct PerfControl { -+ uint32 RevID; /* (00) */ -+ uint16 testControl; /* (04) */ -+ uint16 blkEnables; /* (06) */ -+ -+#define ADSL_CLK_EN 0x0001 -+#define MPI_CLK_EN 0x0002 -+#define DRAM_CLK_EN 0x0004 -+#define EMAC_CLK_EN 0x0010 -+#define USBS_CLK_EN 0x0010 -+#define SAR_CLK_EN 0x0020 -+#define SPI_CLK_EN 0x0200 -+ -+ uint32 pll_control; /* (08) */ -+#define CHIP_SOFT_RESET 0x00000001 -+ -+ uint32 IrqMask; /* (0c) */ -+ uint32 IrqStatus; /* (10) */ -+ -+ uint32 ExtIrqCfg; -+#define EI_SENSE_SHFT 0 -+#define EI_STATUS_SHFT 5 -+#define EI_CLEAR_SHFT 10 -+#define EI_MASK_SHFT 15 -+#define EI_INSENS_SHFT 20 -+#define EI_LEVEL_SHFT 25 -+ -+ uint32 unused[4]; /* (18) */ -+ uint32 BlockSoftReset; /* (28) */ -+#define BSR_SPI 0x00000001 -+#define BSR_EMAC 0x00000004 -+#define BSR_USBH 0x00000008 -+#define BSR_USBS 0x00000010 -+#define BSR_ADSL 0x00000020 -+#define BSR_DMAMEM 0x00000040 -+#define BSR_SAR 0x00000080 -+#define BSR_ACLC 0x00000100 -+#define BSR_ADSL_MIPS_PLL 0x00000400 -+#define BSR_ALL_BLOCKS \ -+ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ -+ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) -+} PerfControl; -+ -+#define PERF ((volatile PerfControl * const) PERF_BASE) -+ -+/* -+** Bus Bridge Registers -+*/ -+typedef struct BusBridge { -+ uint16 status; -+#define BB_BUSY 0x8000 /* posted operation in progress */ -+#define BB_RD_PND 0x4000 /* read pending */ -+#define BB_RD_CMPLT 0x2000 /* read complete */ -+#define BB_ERROR 0x1000 /* posted write error */ -+#define BB_TEA 0x0800 /* transfer aborted */ -+ uint16 abortTimeoutCnt; /* abort timeout value */ -+ -+ byte writePostEnable; -+#define BB_POST_TIMR_EN 0x08 /* post writes to timer regs */ -+#define BB_POST_GPIO_EN 0x04 /* post writes to gpio regs */ -+#define BB_POST_INTC_EN 0x02 /* post writes to interrupt controller regs */ -+#define BB_POST_UART_EN 0x01 /* post writes to uart regs */ -+ byte unused1[5]; -+ uint16 postAddr; /* posted read address (lower half) */ -+ byte unused2[3]; -+ byte postData; /* posted read data */ -+} BusBridge; -+ -+/* register offsets (needed for EBI master access) */ -+#define BB_STATUS 0 -+#define BB_ABORT_TO_CNT 2 -+#define BB_WR_POST_EN 4 -+#define BB_RD_POST_ADDR 10 -+#define BB_RD_POST_DATA 12 -+ -+#define BRIDGE *bridge ((volatile BusBridge * const) BB_BASE) -+ -+/* -+** Timer -+*/ -+typedef struct Timer { -+ uint16 unused0; -+ byte TimerMask; -+#define TIMER0EN 0x01 -+#define TIMER1EN 0x02 -+#define TIMER2EN 0x04 -+ byte TimerInts; -+#define TIMER0 0x01 -+#define TIMER1 0x02 -+#define TIMER2 0x04 -+#define WATCHDOG 0x08 -+ uint32 TimerCtl0; -+ uint32 TimerCtl1; -+ uint32 TimerCtl2; -+#define TIMERENABLE 0x80000000 -+#define RSTCNTCLR 0x40000000 -+ uint32 TimerCnt0; -+ uint32 TimerCnt1; -+ uint32 TimerCnt2; -+ uint32 WatchDogDefCount; -+ -+ /* Write 0xff00 0x00ff to Start timer -+ * Write 0xee00 0x00ee to Stop and re-load default count -+ * Read from this register returns current watch dog count -+ */ -+ uint32 WatchDogCtl; -+ -+ /* Number of 40-MHz ticks for WD Reset pulse to last */ -+ uint32 WDResetCount; -+} Timer; -+ -+#define TIMER ((volatile Timer * const) TIMR_BASE) -+ -+/* -+** UART -+*/ -+typedef struct UartChannel { -+ byte unused0; -+ byte control; -+#define BRGEN 0x80 /* Control register bit defs */ -+#define TXEN 0x40 -+#define RXEN 0x20 -+#define LOOPBK 0x10 -+#define TXPARITYEN 0x08 -+#define TXPARITYEVEN 0x04 -+#define RXPARITYEN 0x02 -+#define RXPARITYEVEN 0x01 -+ -+ byte config; -+#define XMITBREAK 0x40 -+#define BITS5SYM 0x00 -+#define BITS6SYM 0x10 -+#define BITS7SYM 0x20 -+#define BITS8SYM 0x30 -+#define ONESTOP 0x07 -+#define TWOSTOP 0x0f -+ /* 4-LSBS represent STOP bits/char -+ * in 1/8 bit-time intervals. Zero -+ * represents 1/8 stop bit interval. -+ * Fifteen represents 2 stop bits. -+ */ -+ byte fifoctl; -+#define RSTTXFIFOS 0x80 -+#define RSTRXFIFOS 0x40 -+ /* 5-bit TimeoutCnt is in low bits of this register. -+ * This count represents the number of characters -+ * idle times before setting receive Irq when below threshold -+ */ -+ uint32 baudword; -+ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate -+ */ -+ -+ byte txf_levl; /* Read-only fifo depth */ -+ byte rxf_levl; /* Read-only fifo depth */ -+ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are -+ * RxThreshold. Irq can be asserted -+ * when rx fifo> thresh, txfifo RX_LENGTH register value */ -+#define EMAC_NO 0x0008 /* Non-Octet aligned */ -+#define EMAC_RXER 0x0004 /* RX_ERR on MII while RX_DV assereted */ -+#define EMAC_CRC_ERROR 0x0002 /* CRC error */ -+#define EMAC_OV 0x0001 /* Overflow */ -+ -+/* HDLC Descriptor Status definitions */ -+#define DMA_HDLC_TX_ABORT 0x0100 -+#define DMA_HDLC_RX_OVERRUN 0x4000 -+#define DMA_HDLC_RX_TOO_LONG 0x2000 -+#define DMA_HDLC_RX_CRC_OK 0x1000 -+#define DMA_HDLC_RX_ABORT 0x0100 -+ -+ uint32 address; /* address of data */ -+} DmaDesc; -+ -+/* -+** Sdram Controller -+*/ -+typedef struct SdramControllerRegs { -+ uint16 unused1; -+ uint16 initControl; /* 02 */ -+#define SD_POWER_DOWN 0x200 /* put sdram into power down */ -+#define SD_SELF_REFRESH 0x100 /* enable self refresh mode */ -+#define SD_SOFT_RESET 0x080 /* soft reset all sdram controller regs */ -+#define SD_EDO_SELECT 0x040 /* select EDO mode */ -+#define SD_EDO_WAIT_STATE 0x020 /* add an EDO wait state */ -+#define SD_8MEG 0x010 /* map sdram to 8 megs */ -+#define SD_MASTER_ENABLE 0x008 /* enable accesses to external sdram */ -+#define SD_MRS 0x004 /* generate a mode register select cycle */ -+#define SD_PRECHARGE 0x002 /* generate a precharge cycle */ -+#define SD_CBR 0x001 /* generate a refresh cycle */ -+ uint8 unused2[3]; -+ uint8 config; /* 07 */ -+#define SD_FAST_MEM 0x04 /* 1=CAS latency of 2, 0 = CAS latency of 3 */ -+#define SD_BURST_LEN 0x03 /* set burst length */ -+#define SD_BURST_FULL_PAGE 0x00 /* .. full page */ -+#define SD_BURST_8 0x01 /* .. 8 words */ -+#define SD_BURST_4 0x02 /* .. 4 words */ -+#define SD_BURST_2 0x03 /* .. 2 words */ -+ uint16 unused3; -+ uint16 refreshControl; /* 0a */ -+#define SD_REFRESH_ENABLE 0x8000 /* refresh enable */ -+#define SD_REFRESH_PERIOD 0x00ff /* refresh period (16 x n x clock_period) */ -+ -+ uint32 memoryBase; /* 0c */ -+#define SD_MEMBASE_MASK 0xffffe000 /* base address mask */ -+#define SD_MEMSIZE_8MEG 0x00000001 /* memory is 8 meg */ -+#define SD_MEMSIZE_2MEG 0x00000001 /* memory is 2 meg */ -+ -+} SdramControllerRegs; -+ -+/* -+** External Bus Interface -+*/ -+typedef struct EbiChipSelect { -+ uint32 base; /* base address in upper 24 bits */ -+#define EBI_SIZE_8K 0 -+#define EBI_SIZE_16K 1 -+#define EBI_SIZE_32K 2 -+#define EBI_SIZE_64K 3 -+#define EBI_SIZE_128K 4 -+#define EBI_SIZE_256K 5 -+#define EBI_SIZE_512K 6 -+#define EBI_SIZE_1M 7 -+#define EBI_SIZE_2M 8 -+#define EBI_SIZE_4M 9 -+#define EBI_SIZE_8M 10 -+#define EBI_SIZE_16M 11 -+#define EBI_SIZE_32M 12 -+#define EBI_SIZE_64M 13 -+#define EBI_SIZE_128M 14 -+#define EBI_SIZE_256M 15 -+ uint32 config; -+#define EBI_ENABLE 0x00000001 /* .. enable this range */ -+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ -+#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ -+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ -+#define EBI_WREN 0x00000020 /* enable posted writes */ -+#define EBI_POLARITY 0x00000040 /* .. set to invert something, -+ ** don't know what yet */ -+#define EBI_FIFO 0x00000200 /* .. use fifo */ -+#define EBI_RE 0x00000400 /* .. Reverse Endian */ -+} EbiChipSelect; -+ -+typedef struct MpiRegisters { -+ EbiChipSelect cs[1]; /* size chip select configuration */ -+} MpiRegisters; -+ -+#define MPI ((volatile MpiRegisters * const) MPI_BASE) -+ -+/* -+** EMAC transmit MIB counters -+*/ -+typedef struct EmacTxMib { -+ uint32 tx_good_octets; /* (200) good byte count */ -+ uint32 tx_good_pkts; /* (204) good pkt count */ -+ uint32 tx_octets; /* (208) good and bad byte count */ -+ uint32 tx_pkts; /* (20c) good and bad pkt count */ -+ uint32 tx_broadcasts_pkts; /* (210) good broadcast packets */ -+ uint32 tx_multicasts_pkts; /* (214) good mulitcast packets */ -+ uint32 tx_len_64; /* (218) RMON tx pkt size buckets */ -+ uint32 tx_len_65_to_127; /* (21c) */ -+ uint32 tx_len_128_to_255; /* (220) */ -+ uint32 tx_len_256_to_511; /* (224) */ -+ uint32 tx_len_512_to_1023; /* (228) */ -+ uint32 tx_len_1024_to_max; /* (22c) */ -+ uint32 tx_jabber_pkts; /* (230) > 1518 with bad crc */ -+ uint32 tx_oversize_pkts; /* (234) > 1518 with good crc */ -+ uint32 tx_fragment_pkts; /* (238) < 63 with bad crc */ -+ uint32 tx_underruns; /* (23c) fifo underrun */ -+ uint32 tx_total_cols; /* (240) total collisions in all tx pkts */ -+ uint32 tx_single_cols; /* (244) tx pkts with single collisions */ -+ uint32 tx_multiple_cols; /* (248) tx pkts with multiple collisions */ -+ uint32 tx_excessive_cols; /* (24c) tx pkts with excessive cols */ -+ uint32 tx_late_cols; /* (250) tx pkts with late cols */ -+ uint32 tx_defered; /* (254) tx pkts deferred */ -+ uint32 tx_carrier_lost; /* (258) tx pkts with CRS lost */ -+ uint32 tx_pause_pkts; /* (25c) tx pause pkts sent */ -+#define NumEmacTxMibVars 24 -+} EmacTxMib; -+ -+/* -+** EMAC receive MIB counters -+*/ -+typedef struct EmacRxMib { -+ uint32 rx_good_octets; /* (280) good byte count */ -+ uint32 rx_good_pkts; /* (284) good pkt count */ -+ uint32 rx_octets; /* (288) good and bad byte count */ -+ uint32 rx_pkts; /* (28c) good and bad pkt count */ -+ uint32 rx_broadcasts_pkts; /* (290) good broadcast packets */ -+ uint32 rx_multicasts_pkts; /* (294) good mulitcast packets */ -+ uint32 rx_len_64; /* (298) RMON rx pkt size buckets */ -+ uint32 rx_len_65_to_127; /* (29c) */ -+ uint32 rx_len_128_to_255; /* (2a0) */ -+ uint32 rx_len_256_to_511; /* (2a4) */ -+ uint32 rx_len_512_to_1023; /* (2a8) */ -+ uint32 rx_len_1024_to_max; /* (2ac) */ -+ uint32 rx_jabber_pkts; /* (2b0) > 1518 with bad crc */ -+ uint32 rx_oversize_pkts; /* (2b4) > 1518 with good crc */ -+ uint32 rx_fragment_pkts; /* (2b8) < 63 with bad crc */ -+ uint32 rx_missed_pkts; /* (2bc) missed packets */ -+ uint32 rx_crc_align_errs; /* (2c0) both or either */ -+ uint32 rx_undersize; /* (2c4) < 63 with good crc */ -+ uint32 rx_crc_errs; /* (2c8) crc errors (only) */ -+ uint32 rx_align_errs; /* (2cc) alignment errors (only) */ -+ uint32 rx_symbol_errs; /* (2d0) pkts with RXERR assertions (symbol errs) */ -+ uint32 rx_pause_pkts; /* (2d4) MAC control, PAUSE */ -+ uint32 rx_nonpause_pkts; /* (2d8) MAC control, not PAUSE */ -+#define NumEmacRxMibVars 23 -+} EmacRxMib; -+ -+typedef struct EmacRegisters { -+ uint32 rxControl; /* (00) receive control */ -+#define EMAC_PM_REJ 0x80 /* - reject DA match in PMx regs */ -+#define EMAC_UNIFLOW 0x40 /* - accept cam match fc */ -+#define EMAC_FC_EN 0x20 /* - enable flow control */ -+#define EMAC_LOOPBACK 0x10 /* - loopback */ -+#define EMAC_PROM 0x08 /* - promiscuous */ -+#define EMAC_RDT 0x04 /* - ignore transmissions */ -+#define EMAC_ALL_MCAST 0x02 /* - ignore transmissions */ -+#define EMAC_NO_BCAST 0x01 /* - ignore transmissions */ -+ -+ -+ uint32 rxMaxLength; /* (04) receive max length */ -+ uint32 txMaxLength; /* (08) transmit max length */ -+ uint32 unused1[1]; -+ uint32 mdioFreq; /* (10) mdio frequency */ -+#define EMAC_MII_PRE_EN 0x00000080 /* prepend preamble sequence */ -+#define EMAC_MDIO_PRE 0x00000080 /* - enable MDIO preamble */ -+#define EMAC_MDC_FREQ 0x0000007f /* - mdio frequency */ -+ -+ uint32 mdioData; /* (14) mdio data */ -+#define MDIO_WR 0x50020000 /* - write framing */ -+#define MDIO_RD 0x60020000 /* - read framing */ -+#define MDIO_PMD_SHIFT 23 -+#define MDIO_REG_SHIFT 18 -+ -+ uint32 intMask; /* (18) int mask */ -+ uint32 intStatus; /* (1c) int status */ -+#define EMAC_FLOW_INT 0x04 /* - flow control event */ -+#define EMAC_MIB_INT 0x02 /* - mib event */ -+#define EMAC_MDIO_INT 0x01 /* - mdio event */ -+ -+ uint32 unused2[3]; -+ uint32 config; /* (2c) config */ -+#define EMAC_ENABLE 0x001 /* - enable emac */ -+#define EMAC_DISABLE 0x002 /* - disable emac */ -+#define EMAC_SOFT_RST 0x004 /* - soft reset */ -+#define EMAC_SOFT_RESET 0x004 /* - emac soft reset */ -+#define EMAC_EXT_PHY 0x008 /* - external PHY select */ -+ -+ uint32 txControl; /* (30) transmit control */ -+#define EMAC_FD 0x001 /* - full duplex */ -+#define EMAC_FLOWMODE 0x002 /* - flow mode */ -+#define EMAC_NOBKOFF 0x004 /* - no backoff in */ -+#define EMAC_SMALLSLT 0x008 /* - small slot time */ -+ -+ uint32 txThreshold; /* (34) transmit threshold */ -+ uint32 mibControl; /* (38) mib control */ -+#define EMAC_NO_CLEAR 0x001 /* don't clear on read */ -+ -+ uint32 unused3[7]; -+ -+ uint32 pm0DataLo; /* (58) perfect match 0 data lo */ -+ uint32 pm0DataHi; /* (5C) perfect match 0 data hi (15:0) */ -+ uint32 pm1DataLo; /* (60) perfect match 1 data lo */ -+ uint32 pm1DataHi; /* (64) perfect match 1 data hi (15:0) */ -+ uint32 pm2DataLo; /* (68) perfect match 2 data lo */ -+ uint32 pm2DataHi; /* (6C) perfect match 2 data hi (15:0) */ -+ uint32 pm3DataLo; /* (70) perfect match 3 data lo */ -+ uint32 pm3DataHi; /* (74) perfect match 3 data hi (15:0) */ -+#define EMAC_CAM_V 0x10000 /* - cam index */ -+#define EMAC_CAM_VALID 0x00010000 -+ -+ uint32 unused4[98]; /* (78-1fc) */ -+ -+ EmacTxMib tx_mib; /* (200) emac tx mib */ -+ uint32 unused5[8]; /* (260-27c) */ -+ -+ EmacRxMib rx_mib; /* (280) rx mib */ -+ -+} EmacRegisters; -+ -+/* register offsets for subrouting access */ -+#define EMAC_RX_CONTROL 0x00 -+#define EMAC_RX_MAX_LENGTH 0x04 -+#define EMAC_TX_MAC_LENGTH 0x08 -+#define EMAC_MDIO_FREQ 0x10 -+#define EMAC_MDIO_DATA 0x14 -+#define EMAC_INT_MASK 0x18 -+#define EMAC_INT_STATUS 0x1C -+#define EMAC_CAM_DATA_LO 0x20 -+#define EMAC_CAM_DATA_HI 0x24 -+#define EMAC_CAM_CONTROL 0x28 -+#define EMAC_CONTROL 0x2C -+#define EMAC_TX_CONTROL 0x30 -+#define EMAC_TX_THRESHOLD 0x34 -+#define EMAC_MIB_CONTROL 0x38 -+ -+ -+#define EMAC1 ((volatile EmacRegisters * const) EMAC1_BASE) -+ -+/* -+** USB Registers -+*/ -+typedef struct UsbRegisters { -+ byte inttf_setting; -+ byte current_config; -+ uint16 status_frameNum; -+#define USB_LINK 0x2000 -+#define USB_BUS_RESET 0x1000 -+#define USB_SUSPENDED 0x0800 -+ byte unused1; -+ byte endpt_prnt; -+ byte endpt_dirn; -+ byte endpt_status; -+#define USB_ENDPOINT_0 0x01 -+#define USB_ENDPOINT_1 0x02 -+#define USB_ENDPOINT_2 0x04 -+#define USB_ENDPOINT_3 0x08 -+#define USB_ENDPOINT_4 0x10 -+#define USB_ENDPOINT_5 0x20 -+#define USB_ENDPOINT_6 0x40 -+#define USB_ENDPOINT_7 0x80 -+ uint32 unused2; -+ byte conf_mem_ctl; -+#define USB_CONF_MEM_RD 0x80 -+#define USB_CONF_MEM_RDY 0x40 -+ byte unused2a; -+ byte conf_mem_read_address; -+ byte conf_mem_write_address; -+ -+ byte unused3; -+ byte dev_req_bytesel; -+ uint16 ext_dev_data; -+ -+ byte unused4; -+ byte clr_fifo; -+ byte endpt_stall_reset; // use same endpoint #'s from above -+ byte usb_cntl; -+#define USB_FORCE_ERR 0x20 -+#define USB_SOFT_RESET 0x10 -+#define USB_RESUME 0x08 -+#define USB_COMMAND_ERR 0x04 -+#define USB_COMMAND_OVER 0x02 -+ byte irq_addr; -+ byte iso_out_in_addr; -+ byte blk_out_in_addr; -+ byte cntl_addr; -+ uint32 unusedx[2]; -+ uint32 tx_ram_write_port; -+ uint32 fifo_status; // (see bcm6338 data sheet for definition) -+ -+ uint32 irq_status; -+ uint32 irq_mask; -+#define USB_NEW_CONFIG 0x00000001 -+#define USB_SETUP_COMMAND_RECV 0x00000002 // non-standard setup cmd rcvd -+#define USB_OUT_FIFO_OV 0x00000004 -+#define USB_RESET_RECV 0x00000008 -+#define USB_SUSPEND_RECV 0x00000010 -+#define USB_FIFO_REWIND 0x00000020 -+#define USB_RX_BULK_FIFO_DATA_AVAIL 0x00000040 -+#define USB_RX_ISO_FIFO_DATA_AVAIL 0x00000080 -+#define USB_LINK_CHANGE 0x00010000 -+ uint32 endpt_cntl; -+#define USB_R_WK_EN 0x0100 -+#define USB_TX_EOP 0x0200 -+#define USB_TX_CNTL_DMA_EN 0x0400 -+#define USB_TX_BULK_DMA_EN 0x0800 -+#define USB_TX_ISO_DMA_EN 0x1000 -+#define USB_RX_CNTL_DMA_EN 0x2000 -+#define USB_RX_BULK_DMA_EN 0x4800 -+#define USB_RX_ISO_DMA_EN 0x8000 -+ uint32 rx_status_read_port; -+ uint32 confmem_read_port; -+ uint32 confmem_write_port; -+ uint32 fifo_ovf_count; -+ uint32 fifo_rewind_cnt; -+ uint32 terminal_count; -+} UsbRegisters; -+ -+#define USB ((volatile UsbRegisters * const) USB_CTL_BASE) -+ -+/* -+** ADSL core Registers -+*/ -+ -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+ -+typedef struct AdslRegisters { -+ uint32 core_control; -+#define ADSL_RESET 0x01 -+ -+ uint32 core_status; -+#define ADSL_HOST_MSG 0x01 -+ -+ uint32 PAD; -+ uint32 bist_status; -+ uint32 PAD[4]; -+ uint32 int_status_i; /* 0x20 */ -+ uint32 int_mask_i; -+ uint32 int_status_f; -+ uint32 int_mask_f; -+#define ADSL_INT_HOST_MSG 0x00000020 -+#define ADSL_INT_DESC_ERR 0x00000400 -+#define ADSL_INT_DATA_ERR 0x00000800 -+#define ADSL_INT_DESC_PROTO_ERR 0x00001000 -+#define ADSL_INT_RCV_DESC_UF 0x00002000 -+#define ADSL_INT_RCV_FIFO_OF 0x00004000 -+#define ADSL_INT_XMT_FIFO_UF 0x00008000 -+#define ADSL_INT_RCV 0x00010000 -+#define ADSL_INT_XMT 0x01000000 -+ -+ uint32 PAD[116]; -+ -+ uint32 xmtcontrol_intr; /* 0x200 */ -+#define ADSL_DMA_XMT_EN 0x00000001 -+#define ADSL_DMA_XMT_LE 0x00000004 -+ uint32 xmtaddr_intr; -+#define ADSL_DMA_ADDR_MASK 0xFFFFF000 -+ uint32 xmtptr_intr; -+#define ADSL_DMA_LAST_DESC_MASK 0x00000FFF -+ uint32 xmtstatus_intr; -+#define ADSL_DMA_CURR_DESC_MASK 0x00000FFF -+#define ADSL_DMA_XMT_STATE_MASK 0x0000F000 -+#define ADSL_DMA_XMT_STATE_DIS 0x00000000 -+#define ADSL_DMA_XMT_STATE_ACT 0x00001000 -+#define ADSL_DMA_XMT_STATE_IDLE 0x00002000 -+#define ADSL_DMA_XMT_STATE_STOP 0x00003000 -+ -+#define ADSL_DMA_XMT_ERR_MASK 0x000F0000 -+#define ADSL_DMA_XMT_ERR_NONE 0x00000000 -+#define ADSL_DMA_XMT_ERR_DPE 0x00010000 -+#define ADSL_DMA_XMT_ERR_FIFO 0x00020000 -+#define ADSL_DMA_XMT_ERR_DTE 0x00030000 -+#define ADSL_DMA_XMT_ERR_DRE 0x00040000 -+ -+ uint32 rcvcontrol_intr; -+#define ADSL_DMA_RCV_EN 0x00000001 -+#define ADSL_DMA_RCV_FO 0x000000FE -+ uint32 rcvaddr_intr; -+ uint32 rcvptr_intr; -+ uint32 rcvstatus_intr; -+#define ADSL_DMA_RCV_STATE_MASK 0x0000F000 -+#define ADSL_DMA_RCV_STATE_DIS 0x00000000 -+#define ADSL_DMA_RCV_STATE_ACT 0x00001000 -+#define ADSL_DMA_RCV_STATE_IDLE 0x00002000 -+#define ADSL_DMA_RCV_STATE_STOP 0x00003000 -+ -+#define ADSL_DMA_RCV_ERR_MASK 0x000F0000 -+#define ADSL_DMA_RCV_ERR_NONE 0x00000000 -+#define ADSL_DMA_RCV_ERR_DPE 0x00010000 -+#define ADSL_DMA_RCV_ERR_FIFO 0x00020000 -+#define ADSL_DMA_RCV_ERR_DTE 0x00030000 -+#define ADSL_DMA_RCV_ERR_DRE 0x00040000 -+ -+ uint32 xmtcontrol_fast; -+ uint32 xmtaddr_fast; -+ uint32 xmtptr_fast; -+ uint32 xmtstatus_fast; -+ uint32 rcvcontrol_fast; -+ uint32 rcvaddr_fast; -+ uint32 rcvptr_fast; -+ uint32 rcvstatus_fast; -+ uint32 PAD[48]; -+ -+ uint32 host_message; /* 0x300 */ -+ uint32 PAD[805]; -+ uint32 core_reset; -+ uint32 core_error; -+ uint32 core_revision; -+ -+#define ADSL_CORE_REV 0x0000000F -+#define ADSL_CORE_TYPE 0x0000FFF0 -+} AdslRegisters; -+ -+#define ADSL ((volatile AdslRegisters * const) ADSL_BASE) -+ -+#if __cplusplus -+} -+#endif -+ -+#endif -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6345_common.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6345_common.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6345_common.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6345_common.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,275 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/***********************************************************************/ -+/* */ -+/* MODULE: 6345_common.h */ -+/* DATE: 96/12/19 */ -+/* PURPOSE: Define addresses of major hardware components of */ -+/* BCM6345 */ -+/* */ -+/***********************************************************************/ -+#ifndef __BCM6345_MAP_COMMON_H -+#define __BCM6345_MAP_COMMON_H -+ -+#if __cplusplus -+extern "C" { -+#endif -+ -+/* matches isb_decoder.v */ -+#define INTC_BASE 0xfffe0000 /* interrupts controller registers */ -+#define BB_BASE 0xfffe0100 /* bus bridge registers */ -+#define TIMR_BASE 0xfffe0200 /* timer registers */ -+#define UART_BASE 0xfffe0300 /* uart registers */ -+#define GPIO_BASE 0xfffe0400 /* gpio registers */ -+#define EMAC_BASE 0xfffe1800 /* EMAC control registers */ -+#define EBIC_BASE 0xfffe2000 /* EBI control registers */ -+#define PCMCIA_BASE 0xfffe2028 /* PCMCIA control registers */ -+#define USB_BASE 0xfffe2100 /* USB controll registers */ -+#define SDRAM_BASE 0xfffe2300 /* SDRAM control registers */ -+#define DMA_BASE 0xfffe2800 /* DMA control registers */ -+ -+/* DMA channel assignments */ -+#define EMAC_RX_CHAN 1 -+#define EMAC_TX_CHAN 2 -+#define EBI_RX_CHAN 5 -+#define EBI_TX_CHAN 6 -+#define RESERVED_RX_CHAN 9 -+#define RESERVED_TX_CHAN 10 -+#define USB_BULK_RX_CHAN 13 -+#define USB_BULK_TX_CHAN 14 -+#define USB_ISO_RX_CHAN 15 -+#define USB_ISO_TX_CHAN 16 -+#define USB_CNTL_RX_CHAN 17 -+#define USB_CNTL_TX_CHAN 18 -+ -+/* -+#-----------------------------------------------------------------------* -+# * -+#************************************************************************ -+*/ -+#define SDR_INIT_CTL 0x00 -+ /* Control Bits */ -+#define SDR_9BIT_COL (1<<11) -+#define SDR_32BIT (1<<10) -+#define SDR_PWR_DN (1<<9) -+#define SDR_SELF_REF (1<<8) -+#define SDR_SOFT_RST (1<<7) -+#define SDR_64x32 (3<<4) -+#define SDR_128MEG (2<<4) -+#define SDR_64MEG (1<<4) -+#define SDR_16MEG (0<<4) -+#define SDR_ENABLE (1<<3) -+#define SDR_MRS_CMD (1<<2) -+#define SDR_PRE_CMD (1<<1) -+#define SDR_CBR_CMD (1<<0) -+ -+#define SDR_CFG_REG 0x04 -+ /* Control Bits */ -+#define SDR_FULL_PG 0x00 -+#define SDR_BURST8 0x01 -+#define SDR_BURST4 0x02 -+#define SDR_BURST2 0x03 -+#define SDR_FAST_MEM (1<<2) -+#define SDR_SLOW_MEM 0x00 -+ -+#define SDR_REF_CTL 0x08 -+ /* Control Bits */ -+#define SDR_REF_EN (1<<15) -+ -+#define SDR_MEM_BASE 0x0c -+ /* Control Bits */ -+#define DRAM2MBSPC 0x00000000 -+#define DRAM8MBSPC 0x00000001 -+#define DRAM16MBSPC 0x00000002 -+#define DRAM32MBSPC 0x00000003 -+#define DRAM64MBSPC 0x00000004 -+ -+#define DRAM2MEG 0x00000000 /* See SDRAM config */ -+#define DRAM8MEG 0x00000001 /* See SDRAM config */ -+#define DRAM16MEG 0x00000002 /* See SDRAM config */ -+#define DRAM32MEG 0x00000003 /* See SDRAM config */ -+#define DRAM64MEG 0x00000004 /* See SDRAM config */ -+ -+/* -+#-----------------------------------------------------------------------* -+# * -+#************************************************************************ -+*/ -+#define CS0BASE 0x00 -+#define CS0CNTL 0x04 -+#define CS1BASE 0x08 -+#define CS1CNTL 0x0c -+#define CS2BASE 0x10 -+#define CS2CNTL 0x14 -+#define CS3BASE 0x18 -+#define CS3CNTL 0x1c -+#define CS4BASE 0x20 -+#define CS4CNTL 0x24 -+#define CS5BASE 0x28 -+#define CS5CNTL 0x2c -+#define CS6BASE 0x30 -+#define CS6CNTL 0x34 -+#define CS7BASE 0x38 -+#define CS7CNTL 0x3c -+#define EBICONFIG 0x40 -+ -+/* -+# CSxBASE settings -+# Size in low 4 bits -+# Base Address for match in upper 24 bits -+*/ -+#define EBI_SIZE_8K 0 -+#define EBI_SIZE_16K 1 -+#define EBI_SIZE_32K 2 -+#define EBI_SIZE_64K 3 -+#define EBI_SIZE_128K 4 -+#define EBI_SIZE_256K 5 -+#define EBI_SIZE_512K 6 -+#define EBI_SIZE_1M 7 -+#define EBI_SIZE_2M 8 -+#define EBI_SIZE_4M 9 -+#define EBI_SIZE_8M 10 -+#define EBI_SIZE_16M 11 -+#define EBI_SIZE_32M 12 -+#define EBI_SIZE_64M 13 -+#define EBI_SIZE_128M 14 -+#define EBI_SIZE_256M 15 -+ -+/* CSxCNTL settings */ -+#define EBI_ENABLE 0x00000001 /* .. enable this range */ -+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ -+#define ZEROWT 0x00000000 /* .. 0 WS */ -+#define ONEWT 0x00000002 /* .. 1 WS */ -+#define TWOWT 0x00000004 /* .. 2 WS */ -+#define THREEWT 0x00000006 /* .. 3 WS */ -+#define FOURWT 0x00000008 /* .. 4 WS */ -+#define FIVEWT 0x0000000a /* .. 5 WS */ -+#define SIXWT 0x0000000c /* .. 6 WS */ -+#define SEVENWT 0x0000000e /* .. 7 WS */ -+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ -+#define EBI_POLARITY 0x00000040 /* .. set to invert chip select polarity */ -+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ -+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ -+#define EBI_FIFO 0x00000200 /* .. enable fifo */ -+#define EBI_RE 0x00000400 /* .. Reverse Endian */ -+ -+/* EBICONFIG settings */ -+#define EBI_MASTER_ENABLE 0x80000000 /* allow external masters */ -+#define EBI_EXT_MAST_PRIO 0x40000000 /* maximize ext master priority */ -+#define EBI_CTRL_ENABLE 0x20000000 -+#define EBI_TA_ENABLE 0x10000000 -+ -+#define BRGEN 0x80 /* Control register bit defs */ -+#define TXEN 0x40 -+#define RXEN 0x20 -+#define LOOPBK 0x10 -+#define TXPARITYEN 0x08 -+#define TXPARITYEVEN 0x04 -+#define RXPARITYEN 0x02 -+#define RXPARITYEVEN 0x01 -+#define XMITBREAK 0x40 -+#define BITS5SYM 0x00 -+#define BITS6SYM 0x10 -+#define BITS7SYM 0x20 -+#define BITS8SYM 0x30 -+#define BAUD115200 0x0a -+#define ONESTOP 0x07 -+#define TWOSTOP 0x0f -+#define TX4 0x40 -+#define RX4 0x04 -+#define RSTTXFIFOS 0x80 -+#define RSTRXFIFOS 0x40 -+#define DELTAIP 0x0001 -+#define TXUNDERR 0x0002 -+#define TXOVFERR 0x0004 -+#define TXFIFOTHOLD 0x0008 -+#define TXREADLATCH 0x0010 -+#define TXFIFOEMT 0x0020 -+#define RXUNDERR 0x0040 -+#define RXOVFERR 0x0080 -+#define RXTIMEOUT 0x0100 -+#define RXFIFOFULL 0x0200 -+#define RXFIFOTHOLD 0x0400 -+#define RXFIFONE 0x0800 -+#define RXFRAMERR 0x1000 -+#define RXPARERR 0x2000 -+#define RXBRK 0x4000 -+ -+#define RXIRQS 0x7fc0 -+#define TXIRQS 0x003e -+ -+#define CPU_CLK_EN 0x0001 -+#define UART_CLK_EN 0x0008 -+ -+#define BLKEN 06 -+ -+#define FMSEL_MASK 0xf0000000 // 31:28 -+#define FMSEL_SHFT 28 -+#define FM_HI_GEAR 0x08000000 // 27 -+#define FMCLKSEL 0x04000000 // 26 -+#define FMDIV_MASK 0x03000000 // 25:24 -+#define FMDIV_SHFT 24 -+#define FBDIV_MASK 0x00f00000 // 23:20 -+#define FBDIV_SHFT 20 -+#define FB_SEL 0x00010000 // 16 -+#define FU2SEL_MASK 0x0000f000 // 15:12 -+#define FU2SEL_SHFT 12 -+#define FU1SEL_MASK 0x00000f00 // 11:8 -+#define FU1SEL_SHFT 8 -+#define FU1PRS_MASK 0x000000e0 // 7:5 -+#define FU1PRS_SHFT 5 -+#define FU1POS_MASK 0x00000018 // 4:3 -+#define FU1POS_SHFT 3 -+#define SOFT_RESET 0x00000001 -+ -+#define FMSEL 0x08 -+ -+#define UART0CONTROL 0x01 -+#define UART0CONFIG 0x02 -+#define UART0RXTIMEOUT 0x03 -+#define UART0BAUD 0x04 -+#define UART0FIFOCFG 0x0a -+#define UART0INTMASK 0x10 -+#define UART0INTSTAT 0x12 -+#define UART0DATA 0x17 -+ -+#define GPIOTBUSSEL 0x03 -+#define GPIODIR 0x06 -+#define GPIOLED 0x09 -+#define GPIOIO 0x0a -+#define GPIOUARTCTL 0x0c -+ -+/*Defines below show which bit enables which UART signals */ -+#define RI1_EN 0x0001 -+#define CTS1_EN 0x0002 -+#define DCD1_EN 0x0004 -+#define DSR1_EN 0x0008 -+#define DTR1_EN 0x0010 -+#define RTS1_EN 0x0020 -+#define DO1_EN 0x0040 -+#define DI1_EN 0x0080 -+#define RI0_EN 0x0100 -+#define CTS0_EN 0x0200 -+#define DCD0_EN 0x0400 -+#define DSR0_EN 0x0800 -+#define DTR0_EN 0x1000 -+#define RTS0_EN 0x2000 -+ -+#if __cplusplus -+} -+#endif -+ -+#endif -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6345_map.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6345_map.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6345_map.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6345_map.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,939 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/***********************************************************************/ -+/* */ -+/* MODULE: 6345_map.h */ -+/* DATE: 96/12/19 */ -+/* PURPOSE: Define addresses of major hardware components of */ -+/* BCM6345 */ -+/* */ -+/***********************************************************************/ -+#ifndef __BCM6345_MAP_H -+#define __BCM6345_MAP_H -+ -+#if __cplusplus -+extern "C" { -+#endif -+ -+#include "bcmtypes.h" -+#include "6345_common.h" -+#include "6345_intr.h" -+ -+/* macro to convert logical data addresses to physical */ -+/* DMA hardware must see physical address */ -+#define LtoP( x ) ( (uint32)x & 0x1fffffff ) -+#define PtoL( x ) ( LtoP(x) | 0xa0000000 ) -+ -+/* -+** Interrupt Controller -+*/ -+typedef struct IntControl { -+ uint32 RevID; /* (00) */ -+ uint16 testControl; /* (04) */ -+ uint16 blkEnables; /* (06) */ -+ -+#define USB_CLK_EN 0x0100 -+#define EMAC_CLK_EN 0x0080 -+#define ADSL_CLK_EN 0x0010 -+#define UART_CLK_EN 0x0008 -+#define EBI_CLK_EN 0x0004 -+#define BUS_CLK_EN 0x0002 -+#define CPU_CLK_EN 0x0001 -+ -+ uint32 pll_control; /* (08) */ -+#define FMSEL_MASK 0xf0000000 // 31:28 -+#define FMSEL_SHFT 28 -+#define FM_HI_GEAR 0x08000000 // 27 -+#define FMCLKSEL 0x04000000 // 26 -+#define FMDIV_MASK 0x03000000 // 25:24 -+#define FMDIV_SHFT 24 -+#define FBDIV_MASK 0x00f00000 // 23:20 -+#define FBDIV_SHFT 20 -+#define FB_SEL 0x00010000 // 16 -+#define FU2SEL_MASK 0x0000f000 // 15:12 -+#define FU2SEL_SHFT 12 -+#define FU1SEL_MASK 0x00000f00 // 11:8 -+#define FU1SEL_SHFT 8 -+#define FU1PRS_MASK 0x000000e0 // 7:5 -+#define FU1PRS_SHFT 5 -+#define FU1POS_MASK 0x00000018 // 4:3 -+#define FU1POS_SHFT 3 -+#define SOFT_RESET 0x00000001 -+ -+ uint32 IrqMask; /* (0c) */ -+ uint32 IrqStatus; /* (10) */ -+ -+ uint32 ExtIrqCfg; -+#define EI_SENSE_SHFT 0 -+#define EI_STATUS_SHFT 4 -+#define EI_CLEAR_SHFT 8 -+#define EI_MASK_SHFT 12 -+#define EI_INSENS_SHFT 16 -+#define EI_LEVEL_SHFT 20 -+} IntControl; -+ -+#define PERF ((volatile IntControl * const) INTC_BASE) -+ -+/* -+** Bus Bridge Registers -+*/ -+typedef struct BusBridge { -+ uint16 status; -+#define BB_BUSY 0x8000 /* posted operation in progress */ -+#define BB_RD_PND 0x4000 /* read pending */ -+#define BB_RD_CMPLT 0x2000 /* read complete */ -+#define BB_ERROR 0x1000 /* posted write error */ -+#define BB_TEA 0x0800 /* transfer aborted */ -+ uint16 abortTimeoutCnt; /* abort timeout value */ -+ -+ byte writePostEnable; -+#define BB_POST_TIMR_EN 0x08 /* post writes to timer regs */ -+#define BB_POST_GPIO_EN 0x04 /* post writes to gpio regs */ -+#define BB_POST_INTC_EN 0x02 /* post writes to interrupt controller regs */ -+#define BB_POST_UART_EN 0x01 /* post writes to uart regs */ -+ byte unused1[5]; -+ uint16 postAddr; /* posted read address (lower half) */ -+ byte unused2[3]; -+ byte postData; /* posted read data */ -+} BusBridge; -+ -+/* register offsets (needed for EBI master access) */ -+#define BB_STATUS 0 -+#define BB_ABORT_TO_CNT 2 -+#define BB_WR_POST_EN 4 -+#define BB_RD_POST_ADDR 10 -+#define BB_RD_POST_DATA 12 -+ -+#define BRIDGE *bridge ((volatile BusBridge * const) BB_BASE) -+ -+/* -+** Timer -+*/ -+typedef struct Timer { -+ uint16 unused0; -+ byte TimerMask; -+#define TIMER0EN 0x01 -+#define TIMER1EN 0x02 -+#define TIMER2EN 0x04 -+ byte TimerInts; -+#define TIMER0 0x01 -+#define TIMER1 0x02 -+#define TIMER2 0x04 -+#define WATCHDOG 0x08 -+ uint32 TimerCtl0; -+ uint32 TimerCtl1; -+ uint32 TimerCtl2; -+#define TIMERENABLE 0x80000000 -+#define RSTCNTCLR 0x40000000 -+ uint32 TimerCnt0; -+ uint32 TimerCnt1; -+ uint32 TimerCnt2; -+ uint32 WatchDogDefCount; -+ -+ /* Write 0xff00 0x00ff to Start timer -+ * Write 0xee00 0x00ee to Stop and re-load default count -+ * Read from this register returns current watch dog count -+ */ -+ uint32 WatchDogCtl; -+ -+ /* Number of 40-MHz ticks for WD Reset pulse to last */ -+ uint32 WDResetCount; -+} Timer; -+ -+#define TIMER ((volatile Timer * const) TIMR_BASE) -+ -+/* -+** UART -+*/ -+typedef struct UartChannel { -+ byte unused0; -+ byte control; -+#define BRGEN 0x80 /* Control register bit defs */ -+#define TXEN 0x40 -+#define RXEN 0x20 -+#define LOOPBK 0x10 -+#define TXPARITYEN 0x08 -+#define TXPARITYEVEN 0x04 -+#define RXPARITYEN 0x02 -+#define RXPARITYEVEN 0x01 -+ -+ byte config; -+#define XMITBREAK 0x40 -+#define BITS5SYM 0x00 -+#define BITS6SYM 0x10 -+#define BITS7SYM 0x20 -+#define BITS8SYM 0x30 -+#define ONESTOP 0x07 -+#define TWOSTOP 0x0f -+ /* 4-LSBS represent STOP bits/char -+ * in 1/8 bit-time intervals. Zero -+ * represents 1/8 stop bit interval. -+ * Fifteen represents 2 stop bits. -+ */ -+ byte fifoctl; -+#define RSTTXFIFOS 0x80 -+#define RSTRXFIFOS 0x40 -+ /* 5-bit TimeoutCnt is in low bits of this register. -+ * This count represents the number of characters -+ * idle times before setting receive Irq when below threshold -+ */ -+ uint32 baudword; -+ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate -+ */ -+ -+ byte txf_levl; /* Read-only fifo depth */ -+ byte rxf_levl; /* Read-only fifo depth */ -+ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are -+ * RxThreshold. Irq can be asserted -+ * when rx fifo> thresh, txfifo RI1 I Controlled by UartCtl[0] ELSE 0 -+ * GPIO[0] -> DMATC_i I Always -+ * GPIO[0] -> DMATC_o O Controlled by dma_enable_n|dma_drive_n -+ * GPIO[0] -> ebi_bsize[0] I Always -+ * -+ * GPIO[1] -> CTS1 I Controlled by UartCtl[1] ELSE 0 -+ * GPIO[1] -> DMAACK1 (18) O Controlled by dma_enable_n -+ * GPIO[1] -> ebi_bg_b O Controlled by ebi_master_n -+ * -+ * GPIO[2] -> DCD1 I Controlled by UartCtl[2] ELSE 0 -+ * GPIO[2] -> ebi_bsize[1] I Always -+ * -+ * GPIO[3] -> DSR1 I Controlled by UartCtl[3] ELSE 0 -+ * GPIO[3] -> INT2 I Always -+ * GPIO[3] -> ebi_bsize[2] I Always -+ * -+ * GPIO[4] -> DTR1 O Controlled by UartCtl[4]&GpioDir[4] -+ * GPIO[4] -> INT3 I Always -+ * GPIO[4] -> ebi_burst I Always -+ * -+ * GPIO[5] -> RTS1 O Controlled by UartCtl[5]&GpioDir[5] -+ * GPIO[5] -> DMAACK0 (17) O Controlled by dma_enable_n -+ * GPIO[5] -> ebi_tsize I Always -+ * -+ * GPIO[6] -> sDout1 O Controlled by UartCtl[6]&GpioDir[6] -+ * GPIO[6] -> DMARQ1 (18) I Always -+ * GPIO[6] -> ebi_bb_i I Always -+ * GPIO[6] -> ebi_bb_o O Controlled by ebi_master_n|ebi_bb_oen -+ * -+ * GPIO[7] -> sDin1 I Controlled by UartCtl[7] ELSE 0 -+ * GPIO[7] -> ebi_br_b I Always -+ * GPIO[7] -> DMARQ0 (17) I Always -+ * -+ * ------ -+ * GPIO_B -+ * ------ -+ * -+ * GPIO[8] -> RI0 I Controlled by UartCtl[8] ELSE 0 -+ * GPIO[8] -> ebi_cs_b[6] O Controlled by ebi_cs_en[6] -+ * -+ * GPIO[9] -> CTS0 I Controlled by UartCtl[9] ELSE 0 -+ * -+ * GPIO[a] -> DCD0 I Controlled by UartCtl[a] ELSE 0 -+ * GPIO[a] -> ebi_cs_b[7] O Controlled by ebi_cs_en[7] -+ * -+ * GPIO[b] -> DSR0 I Controlled by UartCtl[b] ELSE 0 -+ * GPIO[b] -> ebi_int_cs_b I Always -+ * -+ * GPIO[c] -> DTR0 O Controlled by UartCtl[c]&GpioDir[c] -+ * -+ * GPIO[d] -> RTS0 O Controlled by UartCtl[d]&&GpioDir[d] -+ * -+ * GPIO[e] -> INT0 I Always -+ * -+ * GPIO[f] -> INT1 I Always -+ * -+ * sDout0 -> (bist_en[15]) ? pll_clk48:sDout0_int -+ * -+ *********************************************************************/ -+ -+} GpioControl; -+ -+#define GPIO ((volatile GpioControl * const) GPIO_BASE) -+ -+#define GPIO_NUM_MAX_BITS_MASK 0x0f -+#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) -+ -+/* -+** DMA Channel (1 .. 20) -+*/ -+typedef struct DmaChannel { -+ uint32 cfg; /* (00) assorted configuration */ -+#define DMA_FLOWC_EN 0x00000010 /* flow control enable */ -+#define DMA_WRAP_EN 0x00000008 /* use DMA_WRAP bit */ -+#define DMA_CHAINING 0x00000004 /* chaining mode */ -+#define DMA_STALL 0x00000002 -+#define DMA_ENABLE 0x00000001 /* set to enable channel */ -+ uint32 maxBurst; /* (04) max burst length permitted */ -+ /* non-chaining / chaining */ -+ uint32 startAddr; /* (08) source addr / ring start address */ -+ uint32 length; /* (0c) xfer len / ring len */ -+#define DMA_KICKOFF 0x80000000 /* start non-chaining xfer */ -+ -+ uint32 bufStat; /* (10) buffer status for non-chaining */ -+ uint32 intStat; /* (14) interrupts control and status */ -+ uint32 intMask; /* (18) interrupts mask */ -+#define DMA_BUFF_DONE 0x00000001 /* buffer done */ -+#define DMA_DONE 0x00000002 /* packet xfer complete */ -+#define DMA_NO_DESC 0x00000004 /* no valid descriptors */ -+ -+// DMA HW bits are clugy in this version of chip (mask/status shifted) -+#define DMA_BUFF_DONE_MASK 0x00000004 /* buffer done */ -+#define DMA_DONE_MASK 0x00000001 /* packet xfer complete */ -+#define DMA_NO_DESC_MASK 0x00000002 /* no valid descriptors */ -+ -+ uint32 fcThreshold; /* (1c) flow control threshold */ -+ uint32 numAlloc; /* */ -+ uint32 unused[7]; /* (20-3c) pad to next descriptor */ -+} DmaChannel; -+/* register offsets, useful for ebi master access */ -+#define DMA_CFG 0 -+#define DMA_MAX_BURST 4 -+#define DMA_START_ADDR 8 -+#define DMA_LENGTH 12 -+#define DMA_BUF_STAT 16 -+#define DMA_INT_STAT 20 -+#define DMA_FC_THRESHOLD 24 -+#define DMA_NUM_ALLOC 28 -+ -+ -+/* paste in your program ... -+DmaChannel *dmaChannels = (DmaChannel *)DMA_BASE; -+DmaChannel *dma1 = dmaChannels[1]; -+*/ -+ -+ -+/* -+** DMA Buffer -+*/ -+typedef struct DmaDesc { -+ uint16 length; /* in bytes of data in buffer */ -+ uint16 status; /* buffer status */ -+#define DMA_OWN 0x8000 /* cleared by DMA, set by SW */ -+#define DMA_EOP 0x0800 /* last buffer in packet */ -+#define DMA_SOP 0x0400 /* first buffer in packet */ -+#define DMA_WRAP 0x0200 /* */ -+#define DMA_APPEND_CRC 0x0100 /* .. for emac tx */ -+#define DATA_FLAG 0x0100 /* .. for secmod rx */ -+#define AUTH_FAIL_FLAG 0x0100 /* .. for secmod tx */ -+ -+/* EMAC Descriptor Status definitions */ -+#define EMAC_UNDERRUN 0x4000 /* Tx underrun, dg-mod ???) */ -+#define EMAC_MISS 0x0080 /* framed address recognition failed (promiscuous) */ -+#define EMAC_BRDCAST 0x0040 /* DA is Broadcast */ -+#define EMAC_MULT 0x0020 /* DA is multicast */ -+#define EMAC_LG 0x0010 /* frame length > RX_LENGTH register value */ -+#define EMAC_NO 0x0008 /* Non-Octet aligned */ -+#define EMAC_RXER 0x0004 /* RX_ERR on MII while RX_DV assereted */ -+#define EMAC_CRC_ERROR 0x0002 /* CRC error */ -+#define EMAC_OV 0x0001 /* Overflow */ -+ -+/* HDLC Descriptor Status definitions */ -+#define DMA_HDLC_TX_ABORT 0x0100 -+#define DMA_HDLC_RX_OVERRUN 0x4000 -+#define DMA_HDLC_RX_TOO_LONG 0x2000 -+#define DMA_HDLC_RX_CRC_OK 0x1000 -+#define DMA_HDLC_RX_ABORT 0x0100 -+ -+ uint32 address; /* address of data */ -+} DmaDesc; -+ -+/* -+** Sdram Controller -+*/ -+typedef struct SdramControllerRegs { -+ uint16 unused1; -+ uint16 initControl; /* 02 */ -+#define SD_POWER_DOWN 0x200 /* put sdram into power down */ -+#define SD_SELF_REFRESH 0x100 /* enable self refresh mode */ -+#define SD_SOFT_RESET 0x080 /* soft reset all sdram controller regs */ -+#define SD_EDO_SELECT 0x040 /* select EDO mode */ -+#define SD_EDO_WAIT_STATE 0x020 /* add an EDO wait state */ -+#define SD_8MEG 0x010 /* map sdram to 8 megs */ -+#define SD_MASTER_ENABLE 0x008 /* enable accesses to external sdram */ -+#define SD_MRS 0x004 /* generate a mode register select cycle */ -+#define SD_PRECHARGE 0x002 /* generate a precharge cycle */ -+#define SD_CBR 0x001 /* generate a refresh cycle */ -+ uint8 unused2[3]; -+ uint8 config; /* 07 */ -+#define SD_FAST_MEM 0x04 /* 1=CAS latency of 2, 0 = CAS latency of 3 */ -+#define SD_BURST_LEN 0x03 /* set burst length */ -+#define SD_BURST_FULL_PAGE 0x00 /* .. full page */ -+#define SD_BURST_8 0x01 /* .. 8 words */ -+#define SD_BURST_4 0x02 /* .. 4 words */ -+#define SD_BURST_2 0x03 /* .. 2 words */ -+ uint16 unused3; -+ uint16 refreshControl; /* 0a */ -+#define SD_REFRESH_ENABLE 0x8000 /* refresh enable */ -+#define SD_REFRESH_PERIOD 0x00ff /* refresh period (16 x n x clock_period) */ -+ -+ uint32 memoryBase; /* 0c */ -+#define SD_MEMBASE_MASK 0xffffe000 /* base address mask */ -+#define SD_MEMSIZE_8MEG 0x00000001 /* memory is 8 meg */ -+#define SD_MEMSIZE_2MEG 0x00000001 /* memory is 2 meg */ -+ -+} SdramControllerRegs; -+ -+/* -+** External Bus Interface -+*/ -+typedef struct EbiChipSelect { -+ uint32 base; /* base address in upper 24 bits */ -+#define EBI_SIZE_8K 0 -+#define EBI_SIZE_16K 1 -+#define EBI_SIZE_32K 2 -+#define EBI_SIZE_64K 3 -+#define EBI_SIZE_128K 4 -+#define EBI_SIZE_256K 5 -+#define EBI_SIZE_512K 6 -+#define EBI_SIZE_1M 7 -+#define EBI_SIZE_2M 8 -+#define EBI_SIZE_4M 9 -+#define EBI_SIZE_8M 10 -+#define EBI_SIZE_16M 11 -+#define EBI_SIZE_32M 12 -+#define EBI_SIZE_64M 13 -+#define EBI_SIZE_128M 14 -+#define EBI_SIZE_256M 15 -+ uint32 config; -+#define EBI_ENABLE 0x00000001 /* .. enable this range */ -+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ -+#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ -+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ -+#define EBI_WREN 0x00000020 /* enable posted writes */ -+#define EBI_POLARITY 0x00000040 /* .. set to invert something, -+ ** don't know what yet */ -+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ -+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ -+#define EBI_FIFO 0x00000200 /* .. use fifo */ -+#define EBI_RE 0x00000400 /* .. Reverse Endian */ -+} EbiChipSelect; -+ -+typedef struct EbiRegisters { -+ EbiChipSelect cs[5]; /* size chip select configuration */ -+ uint32 reserved[6]; -+ uint32 ebi_config; /* configuration */ -+#define EBI_MASTER_ENABLE 0x80000000 /* allow external masters */ -+#define EBI_EXT_MAST_PRIO 0x40000000 /* maximize ext master priority */ -+#define EBI_CTRL_ENABLE 0x20000000 -+#define EBI_TA_ENABLE 0x10000000 -+ uint32 dma_control; -+#define EBI_TX_INV_IRQ_EN 0x00080000 -+#define EBI_RX_INV_IRQ_EN 0x00040000 -+#define EBI_TX_PKT_DN_IRQ_EN 0x00020000 -+#define EBI_RX_PKT_DN_IRQ_EN 0x00010000 -+#define EBI_TX_INV_CLR 0x00001000 -+#define EBI_RX_INV_CLR 0x00000800 -+#define EBI_CHAINING 0x00000400 -+#define EBI_EXT_MODE 0x00000200 -+#define EBI_HALF_WORD 0x00000100 -+#define EBI_TX_PKT_DN_CLR 0x00000080 -+#define EBI_RX_PKT_DN_CLR 0x00000040 -+#define EBI_TX_BUF_DN_CLR 0x00000020 -+#define EBI_RX_BUF_DN_CLR 0x00000010 -+#define EBI_TX_BUF_DN_IRQ_EN 0x00000008 -+#define EBI_RX_BUF_DN_IRQ_EN 0x00000004 -+#define EBI_TX_EN 0x00000002 -+#define EBI_RX_EN 0x00000001 -+ uint32 dma_rx_start_addr; -+ uint32 dma_rx_buf_size; -+ uint32 dma_tx_start_addr; -+ uint32 dma_tx_buf_size; -+ uint32 dma_status; -+#define EBI_TX_INV_DESC 0x00000020 -+#define EBI_RX_INV_DESC 0x00000010 -+#define EBI_TX_PKT_DN 0x00000008 -+#define EBI_RX_PKT_DN 0x00000004 -+#define EBI_TX_BUF_DN 0x00000002 -+#define EBI_RX_BUF_DN 0x00000001 -+} EbiRegisters; -+ -+#define EBIC ((volatile EbiRegisters * const) EBIC_BASE) -+ -+typedef struct PcmciaRegisters { -+ /*Each of base has 24 bits of base address followed by size select field*/ -+ uint32 mem_base; -+ uint32 mem_cntrl; -+ uint32 attr_base; -+ uint32 attr_cntrl; -+ uint32 io_base; -+ uint32 io_cntrl; -+#define PCMCIA_CS_ENABLE 0x00000001 -+#define PCMCIA_CS_FIFO_ENABLE 0x00000200 -+#define PCMCIA_DSTSIZE_16 0x00000010 // 0 -8bit, 1- 16bit -+#define PCMCIA_RENDIAN 0x00000400 -+ /* Skip ECR and EBI-DMA registers */ -+ uint32 other1[7]; -+ -+ byte mem_waitcnt4; // Only bits [5:0] -+ byte mem_waitcnt3; // Only bits [4:0] -+ byte mem_waitcnt2; // Only bits [4:0] -+ byte mem_waitcnt1; // Only bits [4:0] -+ -+ byte attr_waitcnt4; // Only bits [5:0] -+ byte attr_waitcnt3; // Only bits [4:0] -+ byte attr_waitcnt2; // Only bits [4:0] -+ byte attr_waitcnt1; // Only bits [4:0] -+ -+ byte io_waitcnt4; // Only bits [5:0] -+ byte io_waitcnt3; // Only bits [4:0] -+ byte io_waitcnt2; // Only bits [4:0] -+ byte io_waitcnt1; // Only bits [4:0] -+ -+} PcmciaRegisters; -+ -+#define PCMCIA ((volatile PcmciaRegisters * const) PCMCIA_BASE) -+ -+/* -+** EMAC transmit MIB counters -+*/ -+typedef struct EmacTxMib { -+ uint32 tx_good_octets; /* (200) good byte count */ -+ uint32 tx_good_pkts; /* (204) good pkt count */ -+ uint32 tx_octets; /* (208) good and bad byte count */ -+ uint32 tx_pkts; /* (20c) good and bad pkt count */ -+ uint32 tx_broadcasts_pkts; /* (210) good broadcast packets */ -+ uint32 tx_multicasts_pkts; /* (214) good mulitcast packets */ -+ uint32 tx_len_64; /* (218) RMON tx pkt size buckets */ -+ uint32 tx_len_65_to_127; /* (21c) */ -+ uint32 tx_len_128_to_255; /* (220) */ -+ uint32 tx_len_256_to_511; /* (224) */ -+ uint32 tx_len_512_to_1023; /* (228) */ -+ uint32 tx_len_1024_to_max; /* (22c) */ -+ uint32 tx_jabber_pkts; /* (230) > 1518 with bad crc */ -+ uint32 tx_oversize_pkts; /* (234) > 1518 with good crc */ -+ uint32 tx_fragment_pkts; /* (238) < 63 with bad crc */ -+ uint32 tx_underruns; /* (23c) fifo underrun */ -+ uint32 tx_total_cols; /* (240) total collisions in all tx pkts */ -+ uint32 tx_single_cols; /* (244) tx pkts with single collisions */ -+ uint32 tx_multiple_cols; /* (248) tx pkts with multiple collisions */ -+ uint32 tx_excessive_cols; /* (24c) tx pkts with excessive cols */ -+ uint32 tx_late_cols; /* (250) tx pkts with late cols */ -+ uint32 tx_defered; /* (254) tx pkts deferred */ -+ uint32 tx_carrier_lost; /* (258) tx pkts with CRS lost */ -+ uint32 tx_pause_pkts; /* (25c) tx pause pkts sent */ -+#define NumEmacTxMibVars 24 -+} EmacTxMib; -+ -+/* -+** EMAC receive MIB counters -+*/ -+typedef struct EmacRxMib { -+ uint32 rx_good_octets; /* (280) good byte count */ -+ uint32 rx_good_pkts; /* (284) good pkt count */ -+ uint32 rx_octets; /* (288) good and bad byte count */ -+ uint32 rx_pkts; /* (28c) good and bad pkt count */ -+ uint32 rx_broadcasts_pkts; /* (290) good broadcast packets */ -+ uint32 rx_multicasts_pkts; /* (294) good mulitcast packets */ -+ uint32 rx_len_64; /* (298) RMON rx pkt size buckets */ -+ uint32 rx_len_65_to_127; /* (29c) */ -+ uint32 rx_len_128_to_255; /* (2a0) */ -+ uint32 rx_len_256_to_511; /* (2a4) */ -+ uint32 rx_len_512_to_1023; /* (2a8) */ -+ uint32 rx_len_1024_to_max; /* (2ac) */ -+ uint32 rx_jabber_pkts; /* (2b0) > 1518 with bad crc */ -+ uint32 rx_oversize_pkts; /* (2b4) > 1518 with good crc */ -+ uint32 rx_fragment_pkts; /* (2b8) < 63 with bad crc */ -+ uint32 rx_missed_pkts; /* (2bc) missed packets */ -+ uint32 rx_crc_align_errs; /* (2c0) both or either */ -+ uint32 rx_undersize; /* (2c4) < 63 with good crc */ -+ uint32 rx_crc_errs; /* (2c8) crc errors (only) */ -+ uint32 rx_align_errs; /* (2cc) alignment errors (only) */ -+ uint32 rx_symbol_errs; /* (2d0) pkts with RXERR assertions (symbol errs) */ -+ uint32 rx_pause_pkts; /* (2d4) MAC control, PAUSE */ -+ uint32 rx_nonpause_pkts; /* (2d8) MAC control, not PAUSE */ -+#define NumEmacRxMibVars 23 -+} EmacRxMib; -+ -+typedef struct EmacRegisters { -+ uint32 rxControl; /* (00) receive control */ -+#define EMAC_PM_REJ 0x80 /* - reject DA match in PMx regs */ -+#define EMAC_UNIFLOW 0x40 /* - accept cam match fc */ -+#define EMAC_FC_EN 0x20 /* - enable flow control */ -+#define EMAC_LOOPBACK 0x10 /* - loopback */ -+#define EMAC_PROM 0x08 /* - promiscuous */ -+#define EMAC_RDT 0x04 /* - ignore transmissions */ -+#define EMAC_ALL_MCAST 0x02 /* - ignore transmissions */ -+#define EMAC_NO_BCAST 0x01 /* - ignore transmissions */ -+ -+ -+ uint32 rxMaxLength; /* (04) receive max length */ -+ uint32 txMaxLength; /* (08) transmit max length */ -+ uint32 unused1[1]; -+ uint32 mdioFreq; /* (10) mdio frequency */ -+#define EMAC_MII_PRE_EN 0x0100 /* prepend preamble sequence */ -+#define EMAC_MDIO_PRE 0x100 /* - enable MDIO preamble */ -+#define EMAC_MDC_FREQ 0x0ff /* - mdio frequency */ -+ -+ uint32 mdioData; /* (14) mdio data */ -+#define MDIO_WR 0x50020000 /* - write framing */ -+#define MDIO_RD 0x60020000 /* - read framing */ -+#define MDIO_PMD_SHIFT 23 -+#define MDIO_REG_SHIFT 18 -+ -+ uint32 intMask; /* (18) int mask */ -+ uint32 intStatus; /* (1c) int status */ -+#define EMAC_FLOW_INT 0x04 /* - flow control event */ -+#define EMAC_MIB_INT 0x02 /* - mib event */ -+#define EMAC_MDIO_INT 0x01 /* - mdio event */ -+ -+ uint32 unused2[3]; -+ uint32 config; /* (2c) config */ -+#define EMAC_ENABLE 0x001 /* - enable emac */ -+#define EMAC_DISABLE 0x002 /* - disable emac */ -+#define EMAC_SOFT_RST 0x004 /* - soft reset */ -+#define EMAC_SOFT_RESET 0x004 /* - emac soft reset */ -+#define EMAC_EXT_PHY 0x008 /* - external PHY select */ -+ -+ uint32 txControl; /* (30) transmit control */ -+#define EMAC_FD 0x001 /* - full duplex */ -+#define EMAC_FLOWMODE 0x002 /* - flow mode */ -+#define EMAC_NOBKOFF 0x004 /* - no backoff in */ -+#define EMAC_SMALLSLT 0x008 /* - small slot time */ -+ -+ uint32 txThreshold; /* (34) transmit threshold */ -+ uint32 mibControl; /* (38) mib control */ -+#define EMAC_NO_CLEAR 0x001 /* don't clear on read */ -+ -+ uint32 unused3[7]; -+ -+ uint32 pm0DataLo; /* (58) perfect match 0 data lo */ -+ uint32 pm0DataHi; /* (5C) perfect match 0 data hi (15:0) */ -+ uint32 pm1DataLo; /* (60) perfect match 1 data lo */ -+ uint32 pm1DataHi; /* (64) perfect match 1 data hi (15:0) */ -+ uint32 pm2DataLo; /* (68) perfect match 2 data lo */ -+ uint32 pm2DataHi; /* (6C) perfect match 2 data hi (15:0) */ -+ uint32 pm3DataLo; /* (70) perfect match 3 data lo */ -+ uint32 pm3DataHi; /* (74) perfect match 3 data hi (15:0) */ -+#define EMAC_CAM_V 0x10000 /* - cam index */ -+#define EMAC_CAM_VALID 0x00010000 -+ -+ uint32 unused4[98]; /* (78-1fc) */ -+ -+ EmacTxMib tx_mib; /* (200) emac tx mib */ -+ uint32 unused5[8]; /* (260-27c) */ -+ -+ EmacRxMib rx_mib; /* (280) rx mib */ -+ -+} EmacRegisters; -+ -+/* register offsets for subrouting access */ -+#define EMAC_RX_CONTROL 0x00 -+#define EMAC_RX_MAX_LENGTH 0x04 -+#define EMAC_TX_MAC_LENGTH 0x08 -+#define EMAC_MDIO_FREQ 0x10 -+#define EMAC_MDIO_DATA 0x14 -+#define EMAC_INT_MASK 0x18 -+#define EMAC_INT_STATUS 0x1C -+#define EMAC_CAM_DATA_LO 0x20 -+#define EMAC_CAM_DATA_HI 0x24 -+#define EMAC_CAM_CONTROL 0x28 -+#define EMAC_CONTROL 0x2C -+#define EMAC_TX_CONTROL 0x30 -+#define EMAC_TX_THRESHOLD 0x34 -+#define EMAC_MIB_CONTROL 0x38 -+ -+ -+#define EMAC ((volatile EmacRegisters * const) EMAC_BASE) -+ -+/* -+** USB Registers -+*/ -+typedef struct UsbRegisters { -+ byte inttf_setting; -+ byte current_config; -+ uint16 status_frameNum; -+#define USB_BUS_RESET 0x1000 -+#define USB_SUSPENDED 0x0800 -+ byte unused1; -+ byte endpt_prnt; -+ byte endpt_dirn; -+ byte endpt_status; -+#define USB_ENDPOINT_0 0x01 -+#define USB_ENDPOINT_1 0x02 -+#define USB_ENDPOINT_2 0x04 -+#define USB_ENDPOINT_3 0x08 -+#define USB_ENDPOINT_4 0x10 -+#define USB_ENDPOINT_5 0x20 -+#define USB_ENDPOINT_6 0x40 -+#define USB_ENDPOINT_7 0x80 -+ uint32 unused2; -+ byte conf_mem_ctl; -+#define USB_CONF_MEM_RD 0x80 -+#define USB_CONF_MEM_RDY 0x40 -+ byte unused2a; -+ byte conf_mem_read_address; -+ byte conf_mem_write_address; -+ -+ byte unused3; -+ byte dev_req_bytesel; -+ uint16 ext_dev_data; -+ -+ byte unused4; -+ byte clr_fifo; -+ byte endpt_stall_reset; // use same endpoint #'s from above -+ byte usb_cntl; -+#define USB_FORCE_ERR 0x20 -+#define USB_SOFT_RESET 0x10 -+#define USB_RESUME 0x08 -+#define USB_COMMAND_ERR 0x04 -+#define USB_COMMAND_OVER 0x02 -+ byte irq_addr; -+ byte iso_out_in_addr; -+ byte blk_out_in_addr; -+ byte cntl_addr; -+ uint32 mux_cntl; -+#define USB_TX_DMA_OPER 0x00000000 -+#define USB_TX_CNTL_FIFO_OPER 0x00000004 -+#define USB_TX_BULK_FIFO_OPER 0x00000008 -+#define USB_TX_ISO_FIFO_OPER 0x0000000c -+#define USB_TX_IRQ_OPER 0x00000010 -+#define USB_RX_DMA_OPER 0x00000000 -+#define USB_RX_CNTL_FIFO_OPER 0x00000001 -+#define USB_RX_BULK_FIFO_OPER 0x00000002 -+#define USB_RX_ISO_FIFO_OPER 0x00000003 -+ uint32 rx_ram_read_port; -+ uint32 tx_ram_write_port; -+ uint32 fifo_status; -+#define USB_CTRLI_FIFO_FULL 0x00000001 -+#define USB_CTRLI_FIFO_EMPTY 0x00000002 -+#define USB_CTRLO_FIFO_FULL 0x00000100 -+#define USB_CTRLO_FIFO_EMPTY 0x00000200 -+ uint32 irq_status; -+ uint32 irq_mask; -+#define USB_NEW_CONFIG 0x01 -+#define USB_SETUP_COMMAND_RECV 0x02 // non-standard setup command received -+#define USB_OUT_FIFO_OV 0x04 -+#define USB_RESET_RECV 0x08 -+#define USB_SUSPEND_RECV 0x10 -+#define USB_FIFO_REWIND 0x20 -+#define USB_RX_BULK_FIFO_DATA_AVAIL 0x40 -+#define USB_RX_ISO_FIFO_DATA_AVAIL 0x80 -+ uint32 endpt_cntl; -+#define USB_R_WK_EN 0x0100 -+#define USB_TX_EOP 0x0200 -+#define USB_TX_CNTL_DMA_EN 0x0400 -+#define USB_TX_BULK_DMA_EN 0x0800 -+#define USB_TX_ISO_DMA_EN 0x1000 -+#define USB_RX_CNTL_DMA_EN 0x2000 -+#define USB_RX_BULK_DMA_EN 0x4800 -+#define USB_RX_ISO_DMA_EN 0x8000 -+ uint32 rx_status_read_port; -+ uint32 confmem_read_port; -+ uint32 confmem_write_port; -+ uint32 fifo_ovf_count; -+ uint32 fifo_rewind_cnt; -+} UsbRegisters; -+ -+#define USB ((volatile UsbRegisters * const) USB_BASE) -+ -+/* -+** ADSL core Registers -+*/ -+ -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+ -+typedef struct AdslRegisters { -+ uint32 core_control; -+#define ADSL_RESET 0x01 -+ -+ uint32 core_status; -+#define ADSL_HOST_MSG 0x01 -+ -+ uint32 PAD; -+ uint32 bist_status; -+ uint32 PAD[4]; -+ uint32 int_status_i; /* 0x20 */ -+ uint32 int_mask_i; -+ uint32 int_status_f; -+ uint32 int_mask_f; -+#define ADSL_INT_HOST_MSG 0x00000020 -+#define ADSL_INT_DESC_ERR 0x00000400 -+#define ADSL_INT_DATA_ERR 0x00000800 -+#define ADSL_INT_DESC_PROTO_ERR 0x00001000 -+#define ADSL_INT_RCV_DESC_UF 0x00002000 -+#define ADSL_INT_RCV_FIFO_OF 0x00004000 -+#define ADSL_INT_XMT_FIFO_UF 0x00008000 -+#define ADSL_INT_RCV 0x00010000 -+#define ADSL_INT_XMT 0x01000000 -+ -+ uint32 PAD[116]; -+ -+ uint32 xmtcontrol_intr; /* 0x200 */ -+#define ADSL_DMA_XMT_EN 0x00000001 -+#define ADSL_DMA_XMT_LE 0x00000004 -+ uint32 xmtaddr_intr; -+#define ADSL_DMA_ADDR_MASK 0xFFFFF000 -+ uint32 xmtptr_intr; -+#define ADSL_DMA_LAST_DESC_MASK 0x00000FFF -+ uint32 xmtstatus_intr; -+#define ADSL_DMA_CURR_DESC_MASK 0x00000FFF -+#define ADSL_DMA_XMT_STATE_MASK 0x0000F000 -+#define ADSL_DMA_XMT_STATE_DIS 0x00000000 -+#define ADSL_DMA_XMT_STATE_ACT 0x00001000 -+#define ADSL_DMA_XMT_STATE_IDLE 0x00002000 -+#define ADSL_DMA_XMT_STATE_STOP 0x00003000 -+ -+#define ADSL_DMA_XMT_ERR_MASK 0x000F0000 -+#define ADSL_DMA_XMT_ERR_NONE 0x00000000 -+#define ADSL_DMA_XMT_ERR_DPE 0x00010000 -+#define ADSL_DMA_XMT_ERR_FIFO 0x00020000 -+#define ADSL_DMA_XMT_ERR_DTE 0x00030000 -+#define ADSL_DMA_XMT_ERR_DRE 0x00040000 -+ -+ uint32 rcvcontrol_intr; -+#define ADSL_DMA_RCV_EN 0x00000001 -+#define ADSL_DMA_RCV_FO 0x000000FE -+ uint32 rcvaddr_intr; -+ uint32 rcvptr_intr; -+ uint32 rcvstatus_intr; -+#define ADSL_DMA_RCV_STATE_MASK 0x0000F000 -+#define ADSL_DMA_RCV_STATE_DIS 0x00000000 -+#define ADSL_DMA_RCV_STATE_ACT 0x00001000 -+#define ADSL_DMA_RCV_STATE_IDLE 0x00002000 -+#define ADSL_DMA_RCV_STATE_STOP 0x00003000 -+ -+#define ADSL_DMA_RCV_ERR_MASK 0x000F0000 -+#define ADSL_DMA_RCV_ERR_NONE 0x00000000 -+#define ADSL_DMA_RCV_ERR_DPE 0x00010000 -+#define ADSL_DMA_RCV_ERR_FIFO 0x00020000 -+#define ADSL_DMA_RCV_ERR_DTE 0x00030000 -+#define ADSL_DMA_RCV_ERR_DRE 0x00040000 -+ -+ uint32 xmtcontrol_fast; -+ uint32 xmtaddr_fast; -+ uint32 xmtptr_fast; -+ uint32 xmtstatus_fast; -+ uint32 rcvcontrol_fast; -+ uint32 rcvaddr_fast; -+ uint32 rcvptr_fast; -+ uint32 rcvstatus_fast; -+ uint32 PAD[48]; -+ -+ uint32 host_message; /* 0x300 */ -+ uint32 PAD[805]; -+ uint32 core_reset; -+ uint32 core_error; -+ uint32 core_revision; -+ -+#define ADSL_CORE_REV 0x0000000F -+#define ADSL_CORE_TYPE 0x0000FFF0 -+} AdslRegisters; -+ -+#define ADSL ((volatile AdslRegisters * const) ADSL_BASE) -+ -+#if __cplusplus -+} -+#endif -+ -+#endif -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6348_common.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6348_common.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6348_common.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6348_common.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,225 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/***********************************************************************/ -+/* */ -+/* MODULE: 6348_common.h */ -+/* DATE: 04/12/19 */ -+/* PURPOSE: Define addresses of major hardware components of */ -+/* BCM6348 */ -+/* */ -+/***********************************************************************/ -+#ifndef __BCM6348_MAP_COMMON_H -+#define __BCM6348_MAP_COMMON_H -+ -+#if __cplusplus -+extern "C" { -+#endif -+ -+#define PERF_BASE 0xfffe0000 /* chip control registers */ -+#define BB_BASE 0xfffe0100 /* bus bridge registers */ -+#define TIMR_BASE 0xfffe0200 /* timer registers */ -+#define UART_BASE 0xfffe0300 /* uart registers */ -+#define GPIO_BASE 0xfffe0400 /* gpio registers */ -+#define SPI_BASE 0xfffe0c00 /* SPI master controller registers */ -+ -+#define USB_CTL_BASE 0xfffe1000 /* USB control registers */ -+#define USB_DMA_BASE 0xfffe1400 /* USB DMA control registers */ -+#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */ -+ -+#define MPI_BASE 0xfffe2000 /* MPI control registers */ -+#define SDRAM_BASE 0xfffe2300 /* SDRAM control registers */ -+ -+#define ADSL_BASE 0xfffe3000 /* ADSL core control registers */ -+#define ATM_BASE 0xfffe4000 /* ATM SAR control registers */ -+#define UBUS_BASE 0xfffe5000 /* UBUS status registers */ -+#define EMAC1_BASE 0xfffe6000 /* EMAC1 control registers */ -+#define EMAC2_BASE 0xfffe6800 /* EMAC2 control registers */ -+#define EMAC_DMA_BASE 0xfffe7000 /* EMAC DMA control registers */ -+ -+/* -+##################################################################### -+# System PLL Control Register -+##################################################################### -+*/ -+#define SYSPLLCFG 0x08 -+ -+#define M_MPI_MASK 0x00000018 // 4:3 -+#define M_MPI_SHFT 3 -+#define M_MPI_50MHZ 0 -+#define M_MPI_40MHZ 1 -+#define M_MPI_33MHZ 2 -+#define M_MPI_25MHZ 3 -+ -+#define M_UTO_MASK 0x00000002 // 1:1 -+#define M_UTO_SHFT 1 -+ -+#define SOFT_RESET 0x00000001 -+ -+#define PLL_STRAP_VALUE 0x34 -+ -+/* -+##################################################################### -+# SDRAM Control Registers -+##################################################################### -+*/ -+#define SDR_INIT_CTL 0x00 -+ /* Control Bits */ -+#define SDR_PFEN1 (1<<16) -+#define SDR_PFEN0 (1<<15) -+#define SDR_EMPRS (1<<14) -+#define SDR_2_BANKS (1<<13) -+#define SDR_1_BANK (0<<13) -+#define SDR_CS1_EN (1<<12) -+#define SDR_PEND (1<<11) -+#define SDR_32_BIT (1<<10) -+#define SDR_POWER_DOWN (1<<9) -+#define SDR_SELF_REFRESH (1<<8) -+#define SDR_11_COLS (3<<6) -+#define SDR_10_COLS (2<<6) -+#define SDR_9_COLS (1<<6) -+#define SDR_8_COLS (0<<6) -+#define SDR_13_ROWS (2<<4) -+#define SDR_12_ROWS (1<<4) -+#define SDR_11_ROWS (0<<4) -+#define SDR_MASTER_EN (1<<3) -+#define SDR_MRS_CMD (1<<2) -+#define SDR_PRE_CMD (1<<1) -+#define SDR_CBR_CMD (1<<0) -+ -+#define SDR_CFG_REG 0x04 -+ /* Control Bits */ -+#define SDR_FULL_PG 0 -+#define SDR_BURST8 1 -+#define SDR_BURST4 2 -+#define SDR_BURST2 3 -+#define SDR_FAST_MEM (1<<2) -+#define SDR_SLOW_MEM (0<<2) -+ -+#define SDR_REF_CTL 0x0C -+ /* Control Bits */ -+#define SDR_REF_EN (1<<15) -+ -+#define SDR_PRIOR -+ /* Control Bits */ -+#define SDR_EN_PRIOR (1<<31) -+ -+ -+/* -+##################################################################### -+# MPI Control Registers -+##################################################################### -+*/ -+#define CS0BASE 0x00 -+#define CS0CNTL 0x04 -+ -+/* -+# CSxBASE settings -+# Size in low 4 bits -+# Base Address for match in upper 24 bits -+*/ -+#define EBI_SIZE_8K 0 -+#define EBI_SIZE_16K 1 -+#define EBI_SIZE_32K 2 -+#define EBI_SIZE_64K 3 -+#define EBI_SIZE_128K 4 -+#define EBI_SIZE_256K 5 -+#define EBI_SIZE_512K 6 -+#define EBI_SIZE_1M 7 -+#define EBI_SIZE_2M 8 -+#define EBI_SIZE_4M 9 -+#define EBI_SIZE_8M 10 -+#define EBI_SIZE_16M 11 -+#define EBI_SIZE_32M 12 -+#define EBI_SIZE_64M 13 -+#define EBI_SIZE_128M 14 -+#define EBI_SIZE_256M 15 -+ -+/* CSxCNTL settings */ -+#define EBI_ENABLE 0x00000001 /* .. enable this range */ -+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ -+#define ZEROWT 0x00000000 /* .. 0 WS */ -+#define ONEWT 0x00000002 /* .. 1 WS */ -+#define TWOWT 0x00000004 /* .. 2 WS */ -+#define THREEWT 0x00000006 /* .. 3 WS */ -+#define FOURWT 0x00000008 /* .. 4 WS */ -+#define FIVEWT 0x0000000a /* .. 5 WS */ -+#define SIXWT 0x0000000c /* .. 6 WS */ -+#define SEVENWT 0x0000000e /* .. 7 WS */ -+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ -+#define EBI_POLARITY 0x00000040 /* .. set to invert chip select polarity */ -+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ -+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ -+#define EBI_FIFO 0x00000200 /* .. enable fifo */ -+#define EBI_RE 0x00000400 /* .. Reverse Endian */ -+ -+/* -+##################################################################### -+# UART Control Registers -+##################################################################### -+*/ -+#define UART0CONTROL 0x01 -+#define UART0CONFIG 0x02 -+#define UART0RXTIMEOUT 0x03 -+#define UART0BAUD 0x04 -+#define UART0FIFOCFG 0x0a -+#define UART0INTMASK 0x10 -+#define UART0INTSTAT 0x12 -+#define UART0DATA 0x17 -+ -+#define BRGEN 0x80 /* Control register bit defs */ -+#define TXEN 0x40 -+#define RXEN 0x20 -+#define LOOPBK 0x10 -+#define TXPARITYEN 0x08 -+#define TXPARITYEVEN 0x04 -+#define RXPARITYEN 0x02 -+#define RXPARITYEVEN 0x01 -+ -+#define XMITBREAK 0x40 /* Config register */ -+#define BITS5SYM 0x00 -+#define BITS6SYM 0x10 -+#define BITS7SYM 0x20 -+#define BITS8SYM 0x30 -+#define ONESTOP 0x07 -+#define TWOSTOP 0x0f -+ -+#define RSTTXFIFOS 0x80 /* Rx Timeout register */ -+#define RSTRXFIFOS 0x40 -+ -+#define TX4 0x40 /* FIFO config register */ -+#define RX4 0x04 -+ -+#define DELTAIP 0x0001 /* Interrupt Status and Mask registers */ -+#define TXUNDERR 0x0002 -+#define TXOVFERR 0x0004 -+#define TXFIFOTHOLD 0x0008 -+#define TXREADLATCH 0x0010 -+#define TXFIFOEMT 0x0020 -+#define RXUNDERR 0x0040 -+#define RXOVFERR 0x0080 -+#define RXTIMEOUT 0x0100 -+#define RXFIFOFULL 0x0200 -+#define RXFIFOTHOLD 0x0400 -+#define RXFIFONE 0x0800 -+#define RXFRAMERR 0x1000 -+#define RXPARERR 0x2000 -+#define RXBRK 0x4000 -+ -+#if __cplusplus -+} -+#endif -+ -+#endif -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6348_map.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6348_map.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6348_map.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6348_map.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,1095 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/***********************************************************************/ -+/* */ -+/* MODULE: 6348_map.h */ -+/* DATE: 11/06/03 */ -+/* PURPOSE: Define addresses of major hardware components of */ -+/* BCM6348 */ -+/* */ -+/***********************************************************************/ -+#ifndef __BCM6348_MAP_H -+#define __BCM6348_MAP_H -+ -+#if __cplusplus -+extern "C" { -+#endif -+ -+#include "bcmtypes.h" -+#include "6348_common.h" -+#include "6348_intr.h" -+ -+/* macro to convert logical data addresses to physical */ -+/* DMA hardware must see physical address */ -+#define LtoP( x ) ( (uint32)x & 0x1fffffff ) -+#define PtoL( x ) ( LtoP(x) | 0xa0000000 ) -+ -+/* -+** Interrupt Controller -+*/ -+typedef struct PerfControl { -+ uint32 RevID; /* (00) */ -+ uint16 testControl; /* (04) */ -+ uint16 blkEnables; /* (06) */ -+ -+#define ADSL_CLK_EN 0x0001 -+#define MPI_CLK_EN 0x0002 -+#define DRAM_CLK_EN 0x0004 -+#define M2M_CLK_EN 0x0008 -+#define EMAC_CLK_EN 0x0010 -+#define SAR_CLK_EN 0x0020 -+#define USBS_CLK_EN 0x0040 -+#define USBH_CLK_EN 0x0100 -+#define SPI_CLK_EN 0x0200 -+ -+ uint32 pll_control; /* (08) */ -+#define CHIP_SOFT_RESET 0x00000001 -+#define MPI_CLK_50MHZ 0x00000000 -+#define MPI_CLK_40MHZ 0x00000008 -+#define MPI_CLK_33MHZ 0x00000010 -+#define MPI_CLK_25MHZ 0x00000018 -+#define MPI_CLK_MASK 0x00000018 -+ -+ uint32 IrqMask; /* (0c) */ -+ uint32 IrqStatus; /* (10) */ -+ -+ uint32 ExtIrqCfg; -+#define EI_SENSE_SHFT 0 -+#define EI_STATUS_SHFT 5 -+#define EI_CLEAR_SHFT 10 -+#define EI_MASK_SHFT 15 -+#define EI_INSENS_SHFT 20 -+#define EI_LEVEL_SHFT 25 -+ -+ uint32 unused[4]; /* (18) */ -+ uint32 BlockSoftReset; /* (28) */ -+#define BSR_SPI 0x00000001 -+#define BSR_EMAC 0x00000004 -+#define BSR_USBH 0x00000008 -+#define BSR_USBS 0x00000010 -+#define BSR_ADSL 0x00000020 -+#define BSR_DMAMEM 0x00000040 -+#define BSR_SAR 0x00000080 -+#define BSR_ACLC 0x00000100 -+#define BSR_ADSL_MIPS_PLL 0x00000400 -+#define BSR_ALL_BLOCKS \ -+ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ -+ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) -+ uint32 unused2[2]; /* (2c) */ -+ uint32 PllStrap; /* (34) */ -+#define PLL_N1_SHFT 20 -+#define PLL_N1_MASK (7< thresh, txfifo= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) ) -+ -+ -+/* -+** Spi Controller -+*/ -+ -+typedef struct SpiControl { -+ uint16 spiCmd; /* (0x0): SPI command */ -+#define SPI_CMD_NOOP 0 -+#define SPI_CMD_SOFT_RESET 1 -+#define SPI_CMD_HARD_RESET 2 -+#define SPI_CMD_START_IMMEDIATE 3 -+ -+#define SPI_CMD_COMMAND_SHIFT 0 -+#define SPI_CMD_DEVICE_ID_SHIFT 4 -+#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8 -+#define SPI_CMD_ONE_BYTE_SHIFT 11 -+#define SPI_CMD_ONE_WIRE_SHIFT 12 -+#define SPI_DEV_ID_0 0 -+#define SPI_DEV_ID_1 1 -+#define SPI_DEV_ID_2 2 -+#define SPI_DEV_ID_3 3 -+ -+ byte spiIntStatus; /* (0x2): SPI interrupt status */ -+ byte spiMaskIntStatus; /* (0x3): SPI masked interrupt status */ -+ -+ byte spiIntMask; /* (0x4): SPI interrupt mask */ -+#define SPI_INTR_CMD_DONE 0x01 -+#define SPI_INTR_RX_OVERFLOW 0x02 -+#define SPI_INTR_INTR_TX_UNDERFLOW 0x04 -+#define SPI_INTR_TX_OVERFLOW 0x08 -+#define SPI_INTR_RX_UNDERFLOW 0x10 -+#define SPI_INTR_CLEAR_ALL 0x1f -+ -+ byte spiStatus; /* (0x5): SPI status */ -+#define SPI_RX_EMPTY 0x02 -+#define SPI_CMD_BUSY 0x04 -+#define SPI_SERIAL_BUSY 0x08 -+ -+ byte spiClkCfg; /* (0x6): SPI clock configuration */ -+#define SPI_CLK_0_391MHZ 1 -+#define SPI_CLK_0_781MHZ 2 /* default */ -+#define SPI_CLK_1_563MHZ 3 -+#define SPI_CLK_3_125MHZ 4 -+#define SPI_CLK_6_250MHZ 5 -+#define SPI_CLK_12_50MHZ 6 -+#define SPI_CLK_MASK 0x07 -+#define SPI_SSOFFTIME_MASK 0x38 -+#define SPI_SSOFFTIME_SHIFT 3 -+#define SPI_BYTE_SWAP 0x80 -+ -+ byte spiFillByte; /* (0x7): SPI fill byte */ -+ -+ byte unused0; -+ byte spiMsgTail; /* (0x9): msgtail */ -+ byte unused1; -+ byte spiRxTail; /* (0xB): rxtail */ -+ -+ uint32 unused2[13]; /* (0x0c - 0x3c) reserved */ -+ -+ byte spiMsgCtl; /* (0x40) control byte */ -+#define FULL_DUPLEX_RW 0 -+#define HALF_DUPLEX_W 1 -+#define HALF_DUPLEX_R 2 -+#define SPI_MSG_TYPE_SHIFT 6 -+#define SPI_BYTE_CNT_SHIFT 0 -+ byte spiMsgData[63]; /* (0x41 - 0x7f) msg data */ -+ byte spiRxDataFifo[64]; /* (0x80 - 0xbf) rx data */ -+ byte unused3[64]; /* (0xc0 - 0xff) reserved */ -+} SpiControl; -+ -+#define SPI ((volatile SpiControl * const) SPI_BASE) -+ -+#define IUDMA_MAX_CHANNELS 16 -+ -+/* -+** DMA Channel Configuration (1 .. 16) -+*/ -+typedef struct DmaChannelCfg { -+ uint32 cfg; /* (00) assorted configuration */ -+#define DMA_BURST_HALT 0x00000004 /* idle after finish current memory burst */ -+#define DMA_PKT_HALT 0x00000002 /* idle after an EOP flag is detected */ -+#define DMA_ENABLE 0x00000001 /* set to enable channel */ -+ uint32 intStat; /* (04) interrupts control and status */ -+ uint32 intMask; /* (08) interrupts mask */ -+#define DMA_BUFF_DONE 0x00000001 /* buffer done */ -+#define DMA_DONE 0x00000002 /* packet xfer complete */ -+#define DMA_NO_DESC 0x00000004 /* no valid descriptors */ -+ uint32 maxBurst; /* (0C) max burst length permitted */ -+} DmaChannelCfg; -+ -+/* -+** DMA State RAM (1 .. 16) -+*/ -+typedef struct DmaStateRam { -+ uint32 baseDescPtr; /* (00) descriptor ring start address */ -+ uint32 state_data; /* (04) state/bytes done/ring offset */ -+ uint32 desc_len_status; /* (08) buffer descriptor status and len */ -+ uint32 desc_base_bufptr; /* (0C) buffer descrpitor current processing */ -+} DmaStateRam; -+ -+/* -+** DMA Registers -+*/ -+typedef struct DmaRegs { -+#define DMA_MASTER_EN 0x00000001 -+#define DMA_FLOWC_CH1_EN 0x00000002 -+#define DMA_FLOWC_CH3_EN 0x00000004 -+#define DMA_NUM_CHS_MASK 0x0f000000 -+#define DMA_NUM_CHS_SHIFT 24 -+#define DMA_FLOWCTL_MASK 0x30000000 -+#define DMA_FLOWCTL_CH1 0x10000000 -+#define DMA_FLOWCTL_CH3 0x20000000 -+#define DMA_FLOWCTL_SHIFT 28 -+ uint32 controller_cfg; /* (00) controller configuration */ -+ -+ // Flow control Ch1 -+ uint32 flowctl_ch1_thresh_lo; /* (04) EMAC1 RX DMA channel */ -+ uint32 flowctl_ch1_thresh_hi; /* (08) EMAC1 RX DMA channel */ -+ uint32 flowctl_ch1_alloc; /* (0C) EMAC1 RX DMA channel */ -+#define DMA_BUF_ALLOC_FORCE 0x80000000 -+ -+ // Flow control Ch3 -+ uint32 flowctl_ch3_thresh_lo; /* (10) EMAC2 RX DMA channel */ -+ uint32 flowctl_ch3_thresh_hi; /* (14) EMAC2 RX DMA channel */ -+ uint32 flowctl_ch3_alloc; /* (18) EMAC2 RX DMA channel */ -+ -+ // Unused words -+ uint32 resv[57]; -+ -+ // Per channel registers/state ram -+ DmaChannelCfg chcfg[IUDMA_MAX_CHANNELS]; /* (100) Channel configuration */ -+ union { -+ DmaStateRam s[IUDMA_MAX_CHANNELS]; -+ uint32 u32[4 * IUDMA_MAX_CHANNELS]; -+ } stram; /* (200) state ram */ -+} DmaRegs; -+ -+/* -+** DMA Buffer -+*/ -+typedef struct DmaDesc { -+ uint16 length; /* in bytes of data in buffer */ -+#define DMA_DESC_USEFPM 0x8000 -+#define DMA_DESC_MULTICAST 0x4000 -+#define DMA_DESC_BUFLENGTH 0x0fff -+ uint16 status; /* buffer status */ -+#define DMA_OWN 0x8000 /* cleared by DMA, set by SW */ -+#define DMA_EOP 0x4000 /* last buffer in packet */ -+#define DMA_SOP 0x2000 /* first buffer in packet */ -+#define DMA_WRAP 0x1000 /* */ -+#define DMA_APPEND_CRC 0x0100 -+ -+/* EMAC Descriptor Status definitions */ -+#define EMAC_MISS 0x0080 /* framed address recognition failed (promiscuous) */ -+#define EMAC_BRDCAST 0x0040 /* DA is Broadcast */ -+#define EMAC_MULT 0x0020 /* DA is multicast */ -+#define EMAC_LG 0x0010 /* frame length > RX_LENGTH register value */ -+#define EMAC_NO 0x0008 /* Non-Octet aligned */ -+#define EMAC_RXER 0x0004 /* RX_ERR on MII while RX_DV assereted */ -+#define EMAC_CRC_ERROR 0x0002 /* CRC error */ -+#define EMAC_OV 0x0001 /* Overflow */ -+ -+/* HDLC Descriptor Status definitions */ -+#define DMA_HDLC_TX_ABORT 0x0100 -+#define DMA_HDLC_RX_OVERRUN 0x4000 -+#define DMA_HDLC_RX_TOO_LONG 0x2000 -+#define DMA_HDLC_RX_CRC_OK 0x1000 -+#define DMA_HDLC_RX_ABORT 0x0100 -+ -+ uint32 address; /* address of data */ -+} DmaDesc; -+ -+/* -+** Sdram Controller -+*/ -+typedef struct SdramControllerRegs { -+ uint16 unused1; -+ uint16 initControl; /* 02 */ -+#define SD_POWER_DOWN 0x200 /* put sdram into power down */ -+#define SD_SELF_REFRESH 0x100 /* enable self refresh mode */ -+#define SD_SOFT_RESET 0x080 /* soft reset all sdram controller regs */ -+#define SD_EDO_SELECT 0x040 /* select EDO mode */ -+#define SD_EDO_WAIT_STATE 0x020 /* add an EDO wait state */ -+#define SD_8MEG 0x010 /* map sdram to 8 megs */ -+#define SD_MASTER_ENABLE 0x008 /* enable accesses to external sdram */ -+#define SD_MRS 0x004 /* generate a mode register select cycle */ -+#define SD_PRECHARGE 0x002 /* generate a precharge cycle */ -+#define SD_CBR 0x001 /* generate a refresh cycle */ -+ uint8 unused2[3]; -+ uint8 config; /* 07 */ -+#define SD_FAST_MEM 0x04 /* 1=CAS latency of 2, 0 = CAS latency of 3 */ -+#define SD_BURST_LEN 0x03 /* set burst length */ -+#define SD_BURST_FULL_PAGE 0x00 /* .. full page */ -+#define SD_BURST_8 0x01 /* .. 8 words */ -+#define SD_BURST_4 0x02 /* .. 4 words */ -+#define SD_BURST_2 0x03 /* .. 2 words */ -+ uint16 unused3; -+ uint16 refreshControl; /* 0a */ -+#define SD_REFRESH_ENABLE 0x8000 /* refresh enable */ -+#define SD_REFRESH_PERIOD 0x00ff /* refresh period (16 x n x clock_period) */ -+ -+ uint32 memoryBase; /* 0c */ -+#define SD_MEMBASE_MASK 0xffffe000 /* base address mask */ -+#define SD_MEMSIZE_8MEG 0x00000001 /* memory is 8 meg */ -+#define SD_MEMSIZE_2MEG 0x00000001 /* memory is 2 meg */ -+ -+} SdramControllerRegs; -+ -+/* -+** External Bus Interface -+*/ -+typedef struct EbiChipSelect { -+ uint32 base; /* base address in upper 24 bits */ -+#define EBI_SIZE_8K 0 -+#define EBI_SIZE_16K 1 -+#define EBI_SIZE_32K 2 -+#define EBI_SIZE_64K 3 -+#define EBI_SIZE_128K 4 -+#define EBI_SIZE_256K 5 -+#define EBI_SIZE_512K 6 -+#define EBI_SIZE_1M 7 -+#define EBI_SIZE_2M 8 -+#define EBI_SIZE_4M 9 -+#define EBI_SIZE_8M 10 -+#define EBI_SIZE_16M 11 -+#define EBI_SIZE_32M 12 -+#define EBI_SIZE_64M 13 -+#define EBI_SIZE_128M 14 -+#define EBI_SIZE_256M 15 -+ uint32 config; -+#define EBI_ENABLE 0x00000001 /* .. enable this range */ -+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ -+#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ -+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ -+#define EBI_WREN 0x00000020 /* enable posted writes */ -+#define EBI_POLARITY 0x00000040 /* .. set to invert something, -+ ** don't know what yet */ -+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ -+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ -+#define EBI_FIFO 0x00000200 /* .. use fifo */ -+#define EBI_RE 0x00000400 /* .. Reverse Endian */ -+} EbiChipSelect; -+ -+typedef struct MpiRegisters { -+ EbiChipSelect cs[7]; /* size chip select configuration */ -+#define EBI_CS0_BASE 0 -+#define EBI_CS1_BASE 1 -+#define EBI_CS2_BASE 2 -+#define EBI_CS3_BASE 3 -+#define PCMCIA_COMMON_BASE 4 -+#define PCMCIA_ATTRIBUTE_BASE 5 -+#define PCMCIA_IO_BASE 6 -+ uint32 unused0[2]; /* reserved */ -+ uint32 ebi_control; /* ebi control */ -+ uint32 unused1[4]; /* reserved */ -+#define EBI_ACCESS_TIMEOUT 0x000007FF -+ uint32 pcmcia_cntl1; /* pcmcia control 1 */ -+#define PCCARD_CARD_RESET 0x00040000 -+#define CARDBUS_ENABLE 0x00008000 -+#define PCMCIA_ENABLE 0x00004000 -+#define PCMCIA_GPIO_ENABLE 0x00002000 -+#define CARDBUS_IDSEL 0x00001F00 -+#define VS2_OEN 0x00000080 -+#define VS1_OEN 0x00000040 -+#define VS2_OUT 0x00000020 -+#define VS1_OUT 0x00000010 -+#define VS2_IN 0x00000008 -+#define VS1_IN 0x00000004 -+#define CD2_IN 0x00000002 -+#define CD1_IN 0x00000001 -+#define VS_MASK 0x0000000C -+#define CD_MASK 0x00000003 -+ uint32 unused2; /* reserved */ -+ uint32 pcmcia_cntl2; /* pcmcia control 2 */ -+#define PCMCIA_BYTESWAP_DIS 0x00000002 -+#define PCMCIA_HALFWORD_EN 0x00000001 -+ uint32 unused3[40]; /* reserved */ -+ -+ uint32 sp0range; /* PCI to internal system bus address space */ -+#define ADDR_SPACE_MASK 0xFFFF0000 -+ uint32 sp0remap; -+ uint32 sp0cfg; -+ uint32 sp1range; -+ uint32 sp1remap; -+ uint32 sp1cfg; -+ -+ uint32 EndianCfg; -+ -+ uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */ -+#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */ -+#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */ -+#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */ -+#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */ -+#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */ -+#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */ -+ -+ uint32 l2pmrange1; /* internal system bus to PCI memory space */ -+#define PCI_SIZE_64K 0xFFFF0000 -+#define PCI_SIZE_128K 0xFFFE0000 -+#define PCI_SIZE_256K 0xFFFC0000 -+#define PCI_SIZE_512K 0xFFF80000 -+#define PCI_SIZE_1M 0xFFF00000 -+#define PCI_SIZE_2M 0xFFE00000 -+#define PCI_SIZE_4M 0xFFC00000 -+#define PCI_SIZE_8M 0xFF800000 -+#define PCI_SIZE_16M 0xFF000000 -+ uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */ -+ uint32 l2pmremap1; -+#define CARDBUS_MEM 0x00000004 -+#define MEM_WINDOW_EN 0x00000001 -+ uint32 l2pmrange2; -+ uint32 l2pmbase2; -+ uint32 l2pmremap2; -+ uint32 l2piorange; /* internal system bus to PCI I/O space */ -+ uint32 l2piobase; -+ uint32 l2pioremap; -+ -+ uint32 pcimodesel; -+#define PCI2_INT_BUS_RD_PREFECH 0x000000F0 -+#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */ -+#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */ -+ -+ uint32 pciintstat; /* PCI interrupt mask/status */ -+#define MAILBOX1_SENT 0x08 -+#define MAILBOX0_SENT 0x04 -+#define MAILBOX1_MSG_RCV 0x02 -+#define MAILBOX0_MSG_RCV 0x01 -+ uint32 locbuscntrl; /* internal system bus control */ -+#define DIR_U2P_NOSWAP 0x00000002 -+#define EN_PCI_GPIO 0x00000001 -+ uint32 locintstat; /* internal system bus interrupt mask/status */ -+#define CSERR 0x0200 -+#define SERR 0x0100 -+#define EXT_PCI_INT 0x0080 -+#define DIR_FAILED 0x0040 -+#define DIR_COMPLETE 0x0020 -+#define PCI_CFG 0x0010 -+ uint32 unused4[7]; -+ -+ uint32 mailbox0; -+ uint32 mailbox1; -+ -+ uint32 pcicfgcntrl; /* internal system bus PCI configuration control */ -+#define PCI_CFG_REG_WRITE_EN 0x00000080 -+#define PCI_CFG_ADDR 0x0000003C -+ uint32 pcicfgdata; /* internal system bus PCI configuration data */ -+ -+ uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */ -+#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */ -+#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */ -+#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */ -+#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */ -+ uint32 locch2intStat; -+#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */ -+#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */ -+#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */ -+ uint32 locch2intMask; -+ uint32 unused5; -+ uint32 locch2descaddr; -+ uint32 locch2status1; -+#define LOCAL_DESC_STATE 0xE0000000 -+#define PCI_DESC_STATE 0x1C000000 -+#define BYTE_DONE 0x03FFC000 -+#define RING_ADDR 0x00003FFF -+ uint32 locch2status2; -+#define BUFPTR_OFFSET 0x1FFF0000 -+#define PCI_MASTER_STATE 0x000000C0 -+#define LOC_MASTER_STATE 0x00000038 -+#define CONTROL_STATE 0x00000007 -+ uint32 unused6; -+ -+ uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */ -+#define DMA_U2P_LE 0x00000200 /* local bus is little endian */ -+#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */ -+ uint32 locch1intstat; -+ uint32 locch1intmask; -+ uint32 unused7; -+ uint32 locch1descaddr; -+ uint32 locch1status1; -+ uint32 locch1status2; -+ uint32 unused8; -+ -+ uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */ -+ uint32 pcich1intstat; -+ uint32 pcich1intmask; -+ uint32 pcich1descaddr; -+ uint32 pcich1status1; -+ uint32 pcich1status2; -+ -+ uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */ -+ uint32 pcich2intstat; -+ uint32 pcich2intmask; -+ uint32 pcich2descaddr; -+ uint32 pcich2status1; -+ uint32 pcich2status2; -+ -+ uint32 perm_id; /* permanent device and vendor id */ -+ uint32 perm_rev; /* permanent revision id */ -+} MpiRegisters; -+ -+#define MPI ((volatile MpiRegisters * const) MPI_BASE) -+ -+/* PCI configuration address space start offset 0x40 */ -+#define BRCM_PCI_CONFIG_TIMER 0x40 -+#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00 -+#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF -+ -+/* -+** EMAC transmit MIB counters -+*/ -+typedef struct EmacTxMib { -+ uint32 tx_good_octets; /* (200) good byte count */ -+ uint32 tx_good_pkts; /* (204) good pkt count */ -+ uint32 tx_octets; /* (208) good and bad byte count */ -+ uint32 tx_pkts; /* (20c) good and bad pkt count */ -+ uint32 tx_broadcasts_pkts; /* (210) good broadcast packets */ -+ uint32 tx_multicasts_pkts; /* (214) good mulitcast packets */ -+ uint32 tx_len_64; /* (218) RMON tx pkt size buckets */ -+ uint32 tx_len_65_to_127; /* (21c) */ -+ uint32 tx_len_128_to_255; /* (220) */ -+ uint32 tx_len_256_to_511; /* (224) */ -+ uint32 tx_len_512_to_1023; /* (228) */ -+ uint32 tx_len_1024_to_max; /* (22c) */ -+ uint32 tx_jabber_pkts; /* (230) > 1518 with bad crc */ -+ uint32 tx_oversize_pkts; /* (234) > 1518 with good crc */ -+ uint32 tx_fragment_pkts; /* (238) < 63 with bad crc */ -+ uint32 tx_underruns; /* (23c) fifo underrun */ -+ uint32 tx_total_cols; /* (240) total collisions in all tx pkts */ -+ uint32 tx_single_cols; /* (244) tx pkts with single collisions */ -+ uint32 tx_multiple_cols; /* (248) tx pkts with multiple collisions */ -+ uint32 tx_excessive_cols; /* (24c) tx pkts with excessive cols */ -+ uint32 tx_late_cols; /* (250) tx pkts with late cols */ -+ uint32 tx_defered; /* (254) tx pkts deferred */ -+ uint32 tx_carrier_lost; /* (258) tx pkts with CRS lost */ -+ uint32 tx_pause_pkts; /* (25c) tx pause pkts sent */ -+#define NumEmacTxMibVars 24 -+} EmacTxMib; -+ -+/* -+** EMAC receive MIB counters -+*/ -+typedef struct EmacRxMib { -+ uint32 rx_good_octets; /* (280) good byte count */ -+ uint32 rx_good_pkts; /* (284) good pkt count */ -+ uint32 rx_octets; /* (288) good and bad byte count */ -+ uint32 rx_pkts; /* (28c) good and bad pkt count */ -+ uint32 rx_broadcasts_pkts; /* (290) good broadcast packets */ -+ uint32 rx_multicasts_pkts; /* (294) good mulitcast packets */ -+ uint32 rx_len_64; /* (298) RMON rx pkt size buckets */ -+ uint32 rx_len_65_to_127; /* (29c) */ -+ uint32 rx_len_128_to_255; /* (2a0) */ -+ uint32 rx_len_256_to_511; /* (2a4) */ -+ uint32 rx_len_512_to_1023; /* (2a8) */ -+ uint32 rx_len_1024_to_max; /* (2ac) */ -+ uint32 rx_jabber_pkts; /* (2b0) > 1518 with bad crc */ -+ uint32 rx_oversize_pkts; /* (2b4) > 1518 with good crc */ -+ uint32 rx_fragment_pkts; /* (2b8) < 63 with bad crc */ -+ uint32 rx_missed_pkts; /* (2bc) missed packets */ -+ uint32 rx_crc_align_errs; /* (2c0) both or either */ -+ uint32 rx_undersize; /* (2c4) < 63 with good crc */ -+ uint32 rx_crc_errs; /* (2c8) crc errors (only) */ -+ uint32 rx_align_errs; /* (2cc) alignment errors (only) */ -+ uint32 rx_symbol_errs; /* (2d0) pkts with RXERR assertions (symbol errs) */ -+ uint32 rx_pause_pkts; /* (2d4) MAC control, PAUSE */ -+ uint32 rx_nonpause_pkts; /* (2d8) MAC control, not PAUSE */ -+#define NumEmacRxMibVars 23 -+} EmacRxMib; -+ -+typedef struct EmacRegisters { -+ uint32 rxControl; /* (00) receive control */ -+#define EMAC_PM_REJ 0x80 /* - reject DA match in PMx regs */ -+#define EMAC_UNIFLOW 0x40 /* - accept cam match fc */ -+#define EMAC_FC_EN 0x20 /* - enable flow control */ -+#define EMAC_LOOPBACK 0x10 /* - loopback */ -+#define EMAC_PROM 0x08 /* - promiscuous */ -+#define EMAC_RDT 0x04 /* - ignore transmissions */ -+#define EMAC_ALL_MCAST 0x02 /* - ignore transmissions */ -+#define EMAC_NO_BCAST 0x01 /* - ignore transmissions */ -+ -+ -+ uint32 rxMaxLength; /* (04) receive max length */ -+ uint32 txMaxLength; /* (08) transmit max length */ -+ uint32 unused1[1]; -+ uint32 mdioFreq; /* (10) mdio frequency */ -+#define EMAC_MII_PRE_EN 0x00000080 /* prepend preamble sequence */ -+#define EMAC_MDIO_PRE 0x00000080 /* - enable MDIO preamble */ -+#define EMAC_MDC_FREQ 0x0000007f /* - mdio frequency */ -+ -+ uint32 mdioData; /* (14) mdio data */ -+#define MDIO_WR 0x50020000 /* - write framing */ -+#define MDIO_RD 0x60020000 /* - read framing */ -+#define MDIO_PMD_SHIFT 23 -+#define MDIO_REG_SHIFT 18 -+ -+ uint32 intMask; /* (18) int mask */ -+ uint32 intStatus; /* (1c) int status */ -+#define EMAC_FLOW_INT 0x04 /* - flow control event */ -+#define EMAC_MIB_INT 0x02 /* - mib event */ -+#define EMAC_MDIO_INT 0x01 /* - mdio event */ -+ -+ uint32 unused2[3]; -+ uint32 config; /* (2c) config */ -+#define EMAC_ENABLE 0x001 /* - enable emac */ -+#define EMAC_DISABLE 0x002 /* - disable emac */ -+#define EMAC_SOFT_RST 0x004 /* - soft reset */ -+#define EMAC_SOFT_RESET 0x004 /* - emac soft reset */ -+#define EMAC_EXT_PHY 0x008 /* - external PHY select */ -+ -+ uint32 txControl; /* (30) transmit control */ -+#define EMAC_FD 0x001 /* - full duplex */ -+#define EMAC_FLOWMODE 0x002 /* - flow mode */ -+#define EMAC_NOBKOFF 0x004 /* - no backoff in */ -+#define EMAC_SMALLSLT 0x008 /* - small slot time */ -+ -+ uint32 txThreshold; /* (34) transmit threshold */ -+ uint32 mibControl; /* (38) mib control */ -+#define EMAC_NO_CLEAR 0x001 /* don't clear on read */ -+ -+ uint32 unused3[7]; -+ -+ uint32 pm0DataLo; /* (58) perfect match 0 data lo */ -+ uint32 pm0DataHi; /* (5C) perfect match 0 data hi (15:0) */ -+ uint32 pm1DataLo; /* (60) perfect match 1 data lo */ -+ uint32 pm1DataHi; /* (64) perfect match 1 data hi (15:0) */ -+ uint32 pm2DataLo; /* (68) perfect match 2 data lo */ -+ uint32 pm2DataHi; /* (6C) perfect match 2 data hi (15:0) */ -+ uint32 pm3DataLo; /* (70) perfect match 3 data lo */ -+ uint32 pm3DataHi; /* (74) perfect match 3 data hi (15:0) */ -+#define EMAC_CAM_V 0x10000 /* - cam index */ -+#define EMAC_CAM_VALID 0x00010000 -+ -+ uint32 unused4[98]; /* (78-1fc) */ -+ -+ EmacTxMib tx_mib; /* (200) emac tx mib */ -+ uint32 unused5[8]; /* (260-27c) */ -+ -+ EmacRxMib rx_mib; /* (280) rx mib */ -+ -+} EmacRegisters; -+ -+/* register offsets for subrouting access */ -+#define EMAC_RX_CONTROL 0x00 -+#define EMAC_RX_MAX_LENGTH 0x04 -+#define EMAC_TX_MAC_LENGTH 0x08 -+#define EMAC_MDIO_FREQ 0x10 -+#define EMAC_MDIO_DATA 0x14 -+#define EMAC_INT_MASK 0x18 -+#define EMAC_INT_STATUS 0x1C -+#define EMAC_CAM_DATA_LO 0x20 -+#define EMAC_CAM_DATA_HI 0x24 -+#define EMAC_CAM_CONTROL 0x28 -+#define EMAC_CONTROL 0x2C -+#define EMAC_TX_CONTROL 0x30 -+#define EMAC_TX_THRESHOLD 0x34 -+#define EMAC_MIB_CONTROL 0x38 -+ -+ -+#define EMAC1 ((volatile EmacRegisters * const) EMAC1_BASE) -+#define EMAC2 ((volatile EmacRegisters * const) EMAC2_BASE) -+ -+/* -+** USB Registers -+*/ -+typedef struct UsbRegisters { -+ byte inttf_setting; -+ byte current_config; -+ uint16 status_frameNum; -+#define USB_LINK 0x2000 -+#define USB_BUS_RESET 0x1000 -+#define USB_SUSPENDED 0x0800 -+ byte unused1; -+ byte endpt_prnt; -+ byte endpt_dirn; -+ byte endpt_status; -+#define USB_ENDPOINT_0 0x01 -+#define USB_ENDPOINT_1 0x02 -+#define USB_ENDPOINT_2 0x04 -+#define USB_ENDPOINT_3 0x08 -+#define USB_ENDPOINT_4 0x10 -+#define USB_ENDPOINT_5 0x20 -+#define USB_ENDPOINT_6 0x40 -+#define USB_ENDPOINT_7 0x80 -+ uint32 unused2; -+ byte conf_mem_ctl; -+#define USB_CONF_MEM_RD 0x80 -+#define USB_CONF_MEM_RDY 0x40 -+ byte unused2a; -+ byte conf_mem_read_address; -+ byte conf_mem_write_address; -+ -+ byte unused3; -+ byte dev_req_bytesel; -+ uint16 ext_dev_data; -+ -+ byte unused4; -+ byte clr_fifo; -+ byte endpt_stall_reset; // use same endpoint #'s from above -+ byte usb_cntl; -+#define USB_FORCE_ERR 0x20 -+#define USB_SOFT_RESET 0x10 -+#define USB_RESUME 0x08 -+#define USB_COMMAND_ERR 0x04 -+#define USB_COMMAND_OVER 0x02 -+ byte irq_addr; -+ byte iso_out_in_addr; -+ byte blk_out_in_addr; -+ byte cntl_addr; -+ uint32 unusedx[2]; -+ uint32 tx_ram_write_port; -+ uint32 fifo_status; // (see bcm6348 data sheet for definition) -+ -+ uint32 irq_status; -+ uint32 irq_mask; -+#define USB_NEW_CONFIG 0x00000001 -+#define USB_SETUP_COMMAND_RECV 0x00000002 // non-standard setup cmd rcvd -+#define USB_OUT_FIFO_OV 0x00000004 -+#define USB_RESET_RECV 0x00000008 -+#define USB_SUSPEND_RECV 0x00000010 -+#define USB_FIFO_REWIND 0x00000020 -+#define USB_RX_BULK_FIFO_DATA_AVAIL 0x00000040 -+#define USB_RX_ISO_FIFO_DATA_AVAIL 0x00000080 -+#define USB_LINK_CHANGE 0x00010000 -+ uint32 endpt_cntl; -+#define USB_R_WK_EN 0x0100 -+#define USB_TX_EOP 0x0200 -+#define USB_TX_CNTL_DMA_EN 0x0400 -+#define USB_TX_BULK_DMA_EN 0x0800 -+#define USB_TX_ISO_DMA_EN 0x1000 -+#define USB_RX_CNTL_DMA_EN 0x2000 -+#define USB_RX_BULK_DMA_EN 0x4800 -+#define USB_RX_ISO_DMA_EN 0x8000 -+ uint32 rx_status_read_port; -+ uint32 confmem_read_port; -+ uint32 confmem_write_port; -+ uint32 fifo_ovf_count; -+ uint32 fifo_rewind_cnt; -+ uint32 terminal_count; -+} UsbRegisters; -+ -+#define USB ((volatile UsbRegisters * const) USB_CTL_BASE) -+ -+/* -+** ADSL core Registers -+*/ -+ -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+ -+typedef struct AdslRegisters { -+ uint32 core_control; -+#define ADSL_RESET 0x01 -+ -+ uint32 core_status; -+#define ADSL_HOST_MSG 0x01 -+ -+ uint32 PAD; -+ uint32 bist_status; -+ uint32 PAD[4]; -+ uint32 int_status_i; /* 0x20 */ -+ uint32 int_mask_i; -+ uint32 int_status_f; -+ uint32 int_mask_f; -+#define ADSL_INT_HOST_MSG 0x00000020 -+#define ADSL_INT_DESC_ERR 0x00000400 -+#define ADSL_INT_DATA_ERR 0x00000800 -+#define ADSL_INT_DESC_PROTO_ERR 0x00001000 -+#define ADSL_INT_RCV_DESC_UF 0x00002000 -+#define ADSL_INT_RCV_FIFO_OF 0x00004000 -+#define ADSL_INT_XMT_FIFO_UF 0x00008000 -+#define ADSL_INT_RCV 0x00010000 -+#define ADSL_INT_XMT 0x01000000 -+ -+ uint32 PAD[116]; -+ -+ uint32 xmtcontrol_intr; /* 0x200 */ -+#define ADSL_DMA_XMT_EN 0x00000001 -+#define ADSL_DMA_XMT_LE 0x00000004 -+ uint32 xmtaddr_intr; -+#define ADSL_DMA_ADDR_MASK 0xFFFFF000 -+ uint32 xmtptr_intr; -+#define ADSL_DMA_LAST_DESC_MASK 0x00000FFF -+ uint32 xmtstatus_intr; -+#define ADSL_DMA_CURR_DESC_MASK 0x00000FFF -+#define ADSL_DMA_XMT_STATE_MASK 0x0000F000 -+#define ADSL_DMA_XMT_STATE_DIS 0x00000000 -+#define ADSL_DMA_XMT_STATE_ACT 0x00001000 -+#define ADSL_DMA_XMT_STATE_IDLE 0x00002000 -+#define ADSL_DMA_XMT_STATE_STOP 0x00003000 -+ -+#define ADSL_DMA_XMT_ERR_MASK 0x000F0000 -+#define ADSL_DMA_XMT_ERR_NONE 0x00000000 -+#define ADSL_DMA_XMT_ERR_DPE 0x00010000 -+#define ADSL_DMA_XMT_ERR_FIFO 0x00020000 -+#define ADSL_DMA_XMT_ERR_DTE 0x00030000 -+#define ADSL_DMA_XMT_ERR_DRE 0x00040000 -+ -+ uint32 rcvcontrol_intr; -+#define ADSL_DMA_RCV_EN 0x00000001 -+#define ADSL_DMA_RCV_FO 0x000000FE -+ uint32 rcvaddr_intr; -+ uint32 rcvptr_intr; -+ uint32 rcvstatus_intr; -+#define ADSL_DMA_RCV_STATE_MASK 0x0000F000 -+#define ADSL_DMA_RCV_STATE_DIS 0x00000000 -+#define ADSL_DMA_RCV_STATE_ACT 0x00001000 -+#define ADSL_DMA_RCV_STATE_IDLE 0x00002000 -+#define ADSL_DMA_RCV_STATE_STOP 0x00003000 -+ -+#define ADSL_DMA_RCV_ERR_MASK 0x000F0000 -+#define ADSL_DMA_RCV_ERR_NONE 0x00000000 -+#define ADSL_DMA_RCV_ERR_DPE 0x00010000 -+#define ADSL_DMA_RCV_ERR_FIFO 0x00020000 -+#define ADSL_DMA_RCV_ERR_DTE 0x00030000 -+#define ADSL_DMA_RCV_ERR_DRE 0x00040000 -+ -+ uint32 xmtcontrol_fast; -+ uint32 xmtaddr_fast; -+ uint32 xmtptr_fast; -+ uint32 xmtstatus_fast; -+ uint32 rcvcontrol_fast; -+ uint32 rcvaddr_fast; -+ uint32 rcvptr_fast; -+ uint32 rcvstatus_fast; -+ uint32 PAD[48]; -+ -+ uint32 host_message; /* 0x300 */ -+ uint32 PAD[805]; -+ uint32 core_reset; -+ uint32 core_error; -+ uint32 core_revision; -+ -+#define ADSL_CORE_REV 0x0000000F -+#define ADSL_CORE_TYPE 0x0000FFF0 -+} AdslRegisters; -+ -+#define ADSL ((volatile AdslRegisters * const) ADSL_BASE) -+ -+#if __cplusplus -+} -+#endif -+ -+#endif -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/AdslMibDef.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/AdslMibDef.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/AdslMibDef.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/AdslMibDef.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,712 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/**************************************************************************** -+ * -+ * AdslMibOid.h -+ * -+ * Description: -+ * SNMP object identifiers for ADSL MIB and other related MIBs -+ * -+ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved. -+ * Authors: Ilya Stomakhin -+ * -+ * $Revision: 1.17 $ -+ * -+ * $Id: AdslMibDef.h,v 1.17 2004/07/27 19:24:40 ilyas Exp $ -+ * -+ * $Log: AdslMibDef.h,v $ -+ * Revision 1.17 2004/07/27 19:24:40 ilyas -+ * Added AnnexM configuration option -+ * -+ * Revision 1.16 2004/06/04 18:56:01 ilyas -+ * Added counter for ADSL2 framing and performance -+ * -+ * Revision 1.15 2004/05/25 16:15:04 ilyas -+ * Added ADSL2 framing status -+ * -+ * Revision 1.14 2004/03/31 19:09:48 ilyas -+ * Added ADSL2+ modulation control -+ * -+ * Revision 1.13 2004/03/03 20:14:05 ilyas -+ * Merged changes for ADSL2+ from ADSL driver -+ * -+ * Revision 1.12 2003/10/17 21:02:12 ilyas -+ * Added more data for ADSL2 -+ * -+ * Revision 1.11 2003/10/14 00:55:27 ilyas -+ * Added UAS, LOSS, SES error seconds counters. -+ * Support for 512 tones (AnnexI) -+ * -+ * Revision 1.10 2003/09/29 18:39:51 ilyas -+ * Added new definitions for AnnexI -+ * -+ * Revision 1.9 2003/07/18 19:14:34 ilyas -+ * Merged with ADSL driver -+ * -+ * Revision 1.8 2003/07/08 18:34:16 ilyas -+ * Added fields to adsl configuration structure -+ * -+ * Revision 1.7 2003/03/25 00:07:00 ilyas -+ * Added "long" BERT supprt -+ * -+ * Revision 1.6 2003/02/27 07:10:52 ilyas -+ * Added more configuration and status parameters (for EFNT) -+ * -+ * Revision 1.5 2003/01/23 20:29:37 ilyas -+ * Added structure for ADSL PHY configuration command -+ * -+ * Revision 1.4 2002/11/13 21:32:49 ilyas -+ * Added adjustK support for Centillium non-standard framing mode -+ * -+ * Revision 1.3 2002/10/31 01:35:50 ilyas -+ * Fixed size of K for S=1/2 -+ * -+ * Revision 1.2 2002/10/05 03:28:31 ilyas -+ * Added extra definitions for Linux and VxWorks drivers. -+ * Added definitions for SelfTest support -+ * -+ * Revision 1.1 2002/07/20 00:51:41 ilyas -+ * Merged witchanges made for VxWorks/Linux driver. -+ * -+ * Revision 1.1 2001/12/21 22:39:30 ilyas -+ * Added support for ADSL MIB data objects (RFC2662) -+ * -+ * -+ *****************************************************************************/ -+ -+#ifndef AdslMibDefHeader -+#define AdslMibDefHeader -+ -+#if defined(__cplusplus) -+extern "C" { -+#endif -+ -+/* -+** -+** ADSL configuration parameters -+** -+*/ -+ -+#define kAdslCfgModMask (0x00000007 | 0x0000F000) -+#define kAdslCfgModAny 0x00000000 -+ -+#define kAdslCfgModGdmtOnly 0x00000001 -+#define kAdslCfgModGliteOnly 0x00000002 -+#define kAdslCfgModT1413Only 0x00000004 -+#define kAdslCfgModAnnexIOnly 0x00000004 -+#define kAdslCfgModAdsl2Only 0x00001000 -+#define kAdslCfgModAdsl2pOnly 0x00002000 -+ -+#define kAdslCfgBitmapMask 0x00000018 -+#define kAdslCfgDBM 0x00000000 -+#define kAdslCfgFBM 0x00000008 -+#define kAdslCfgFBMSoL 0x00000010 -+ -+#define kAdslCfgLinePairMask 0x00000020 -+#define kAdslCfgLineInnerPair 0x00000000 -+#define kAdslCfgLineOuterPair 0x00000020 -+ -+#define kAdslCfgCentilliumCRCWorkAroundMask 0x00000040 -+#define kAdslCfgCentilliumCRCWorkAroundDisabled 0x00000000 -+#define kAdslCfgCentilliumCRCWorkAroundEnabled 0x00000040 -+ -+#define kAdslCfgExtraData 0x00000080 -+#define kAdslCfgTrellisMask (0x00000100 | kAdslCfgExtraData) -+#define kAdslCfgTrellisOn (0x00000100 | kAdslCfgExtraData) -+#define kAdslCfgTrellisOff (0 | kAdslCfgExtraData) -+#define kAdslCfgExtraMask 0xFFFFFF80 -+ -+#define kAdslCfgLOSMonitoringMask 0x00000200 -+#define kAdslCfgLOSMonitoringOff 0x00000200 -+#define kAdslCfgLOSMonitoringOn 0x00000000 -+ -+#define kAdslCfgMarginMonitoringMask 0x00000400 -+#define kAdslCfgMarginMonitoringOn 0x00000400 -+#define kAdslCfgMarginMonitoringOff 0x00000000 -+ -+#define kAdslCfgDemodCapMask 0x00000800 -+#define kAdslCfgDemodCapOn 0x00000800 -+#define kAdslCfgDemodCapOff 0x00000000 -+ -+/* Flags 0x00001000 - 0x00008000 are reserved for modulation (see above) */ -+ -+/* Upstream mode flags 0x00010000 - 0x00030000 */ -+ -+#define kAdslCfgUpstreamModeMask 0x00030000 -+#define kAdslCfgUpstreamMax 0x00000000 -+#define kAdslCfgUpstreamSingle 0x00010000 -+#define kAdslCfgUpstreamDouble 0x00020000 -+#define kAdslCfgUpstreamTriple 0x00030000 -+ -+#define kAdslCfgNoSpectrumOverlap 0x00040000 -+ -+/* Pwm sync clock configuration */ -+ -+#define kAdslCfgPwmSyncClockMask 0x00080000 -+#define kAdslCfgPwmSyncClockOn 0x00080000 -+#define kAdslCfgPwmSyncClockOff 0x00000000 -+ -+#define kAdslCfgDefaultTrainingMargin -1 -+#define kAdslCfgDefaultShowtimeMargin -1 -+#define kAdslCfgDefaultLOMTimeThld -1 -+ -+/* ADSL2 parameters */ -+ -+#define kAdsl2CfgReachExOn 0x00000001 -+#define kAdsl2CfgAnnexMEnabled 0x00000002 -+ -+typedef struct _adslCfgProfile { -+ long adslAnnexCParam; -+ long adslAnnexAParam; -+ long adslTrainingMarginQ4; -+ long adslShowtimeMarginQ4; -+ long adslLOMTimeThldSec; -+ long adslDemodCapMask; -+ long adslDemodCapValue; -+ long adsl2Param; -+ long adslPwmSyncClockFreq; -+} adslCfgProfile; -+ -+/* -+** -+** ADSL PHY configuration -+** -+*/ -+ -+typedef struct _adslPhyCfg { -+ long demodCapMask; -+ long demodCap; -+} adslPhyCfg; -+ -+/* -+** -+** ADSL version info parameters -+** -+*/ -+ -+#define kAdslVersionStringSize 32 -+ -+#define kAdslTypeUnknown 0 -+#define kAdslTypeAnnexA 1 -+#define kAdslTypeAnnexB 2 -+#define kAdslTypeAnnexC 3 -+#define kAdslTypeSADSL 4 -+ -+typedef struct _adslVersionInfo { -+ unsigned short phyType; -+ unsigned short phyMjVerNum; -+ unsigned short phyMnVerNum; -+ char phyVerStr[kAdslVersionStringSize]; -+ unsigned short drvMjVerNum; -+ unsigned short drvMnVerNum; -+ char drvVerStr[kAdslVersionStringSize]; -+} adslVersionInfo; -+ -+/* -+** -+** ADSL self-test parameters -+** -+*/ -+ -+#define kAdslSelfTestLMEM 0x00000001 -+#define kAdslSelfTestSDRAM 0x00000002 -+#define kAdslSelfTestAFE 0x00000004 -+#define kAdslSelfTestQproc 0x00000008 -+#define kAdslSelfTestRS 0x00000010 -+#define kAdslSelfTestHostDma 0x00000020 -+ -+#define kAdslSelfTestAll ((kAdslSelfTestHostDma - 1) | kAdslSelfTestHostDma) -+ -+#define kAdslSelfTestInProgress 0x40000000 -+#define kAdslSelfTestCompleted 0x80000000 -+ -+/* MIB OID's for ADSL objects */ -+ -+#define kOidMaxObjLen 80 -+ -+#define kOidAdsl 94 -+#define kOidAdslInterleave 124 -+#define kOidAdslFast 125 -+#define kOidAtm 37 -+#define kOidAdslPrivate 255 -+#define kOidAdslPrivatePartial 254 -+ -+#define kAdslMibAnnexAToneNum 256 -+#define kAdslMibToneNum kAdslMibAnnexAToneNum -+#define kAdslMibMaxToneNum kAdslMibAnnexAToneNum*2*2 -+ -+#define kOidAdslPrivSNR 1 -+#define kOidAdslPrivBitAlloc 2 -+#define kOidAdslPrivGain 3 -+#define kOidAdslPrivShowtimeMargin 4 -+#define kOidAdslPrivChanCharLin 5 -+#define kOidAdslPrivChanCharLog 6 -+#define kOidAdslPrivQuietLineNoise 7 -+#define kOidAdslPrivExtraInfo 255 -+ -+#define kOidAdslLine 1 -+#define kOidAdslMibObjects 1 -+ -+#define kOidAdslLineTable 1 -+#define kOidAdslLineEntry 1 -+#define kOidAdslLineCoding 1 -+#define kOidAdslLineType 2 -+#define kOidAdslLineSpecific 3 -+#define kOidAdslLineConfProfile 4 -+#define kOidAdslLineAlarmConfProfile 5 -+ -+#define kOidAdslAtucPhysTable 2 -+#define kOidAdslAturPhysTable 3 -+#define kOidAdslPhysEntry 1 -+#define kOidAdslPhysInvSerialNumber 1 -+#define kOidAdslPhysInvVendorID 2 -+#define kOidAdslPhysInvVersionNumber 3 -+#define kOidAdslPhysCurrSnrMgn 4 -+#define kOidAdslPhysCurrAtn 5 -+#define kOidAdslPhysCurrStatus 6 -+#define kOidAdslPhysCurrOutputPwr 7 -+#define kOidAdslPhysCurrAttainableRate 8 -+ -+#define kOidAdslAtucChanTable 4 -+#define kOidAdslAturChanTable 5 -+#define kOidAdslChanEntry 1 -+#define kOidAdslChanInterleaveDelay 1 -+#define kOidAdslChanCurrTxRate 2 -+#define kOidAdslChanPrevTxRate 3 -+#define kOidAdslChanCrcBlockLength 4 -+ -+#define kOidAdslAtucPerfDataTable 6 -+#define kOidAdslAturPerfDataTable 7 -+#define kOidAdslPerfDataEntry 1 -+#define kOidAdslPerfLofs 1 -+#define kOidAdslPerfLoss 2 -+#define kOidAdslPerfLprs 3 -+#define kOidAdslPerfESs 4 -+#define kOidAdslPerfValidIntervals 5 -+#define kOidAdslPerfInvalidIntervals 6 -+#define kOidAdslPerfCurr15MinTimeElapsed 7 -+#define kOidAdslPerfCurr15MinLofs 8 -+#define kOidAdslPerfCurr15MinLoss 9 -+#define kOidAdslPerfCurr15MinLprs 10 -+#define kOidAdslPerfCurr15MinESs 11 -+#define kOidAdslPerfCurr1DayTimeElapsed 12 -+#define kOidAdslPerfCurr1DayLofs 13 -+#define kOidAdslPerfCurr1DayLoss 14 -+#define kOidAdslPerfCurr1DayLprs 15 -+#define kOidAdslPerfCurr1DayESs 16 -+#define kOidAdslPerfPrev1DayMoniSecs 17 -+#define kOidAdslPerfPrev1DayLofs 18 -+#define kOidAdslPerfPrev1DayLoss 19 -+#define kOidAdslPerfPrev1DayLprs 20 -+#define kOidAdslPerfPrev1DayESs 21 -+ -+#define kOidAdslAtucPerfIntervalTable 8 -+#define kOidAdslAturPerfIntervalTable 9 -+#define kOidAdslPerfIntervalEntry 1 -+#define kOidAdslIntervalNumber 1 -+#define kOidAdslIntervalLofs 2 -+#define kOidAdslIntervalLoss 3 -+#define kOidAdslIntervalLprs 4 -+#define kOidAdslIntervalESs 5 -+#define kOidAdslIntervalValidData 6 -+ -+#define kOidAdslAtucChanPerfTable 10 -+#define kOidAdslAturChanPerfTable 11 -+#define kOidAdslChanPerfEntry 1 -+#define kOidAdslChanReceivedBlks 1 -+#define kOidAdslChanTransmittedBlks 2 -+#define kOidAdslChanCorrectedBlks 3 -+#define kOidAdslChanUncorrectBlks 4 -+#define kOidAdslChanPerfValidIntervals 5 -+#define kOidAdslChanPerfInvalidIntervals 6 -+#define kOidAdslChanPerfCurr15MinTimeElapsed 7 -+#define kOidAdslChanPerfCurr15MinReceivedBlks 8 -+#define kOidAdslChanPerfCurr15MinTransmittedBlks 9 -+#define kOidAdslChanPerfCurr15MinCorrectedBlks 10 -+#define kOidAdslChanPerfCurr15MinUncorrectBlks 11 -+#define kOidAdslChanPerfCurr1DayTimeElapsed 12 -+#define kOidAdslChanPerfCurr1DayReceivedBlks 13 -+#define kOidAdslChanPerfCurr1DayTransmittedBlks 14 -+#define kOidAdslChanPerfCurr1DayCorrectedBlks 15 -+#define kOidAdslChanPerfCurr1DayUncorrectBlks 16 -+#define kOidAdslChanPerfPrev1DayMoniSecs 17 -+#define kOidAdslChanPerfPrev1DayReceivedBlks 18 -+#define kOidAdslChanPerfPrev1DayTransmittedBlks 19 -+#define kOidAdslChanPerfPrev1DayCorrectedBlks 20 -+#define kOidAdslChanPerfPrev1DayUncorrectBlks 21 -+ -+#define kOidAdslAtucChanIntervalTable 12 -+#define kOidAdslAturChanIntervalTable 13 -+#define kOidAdslChanIntervalEntry 1 -+#define kOidAdslChanIntervalNumber 1 -+#define kOidAdslChanIntervalReceivedBlks 2 -+#define kOidAdslChanIntervalTransmittedBlks 3 -+#define kOidAdslChanIntervalCorrectedBlks 4 -+#define kOidAdslChanIntervalUncorrectBlks 5 -+#define kOidAdslChanIntervalValidData 6 -+ -+#define kOidAtmMibObjects 1 -+#define kOidAtmTcTable 4 -+#define kOidAtmTcEntry 1 -+#define kOidAtmOcdEvents 1 -+#define kOidAtmAlarmState 2 -+ -+/* Adsl Channel coding */ -+ -+#define kAdslRcvDir 0 -+#define kAdslXmtDir 1 -+ -+#define kAdslRcvActive (1 << kAdslRcvDir) -+#define kAdslXmtActive (1 << kAdslXmtDir) -+ -+#define kAdslIntlChannel 0 -+#define kAdslFastChannel 1 -+ -+#define kAdslTrellisOff 0 -+#define kAdslTrellisOn 1 -+ -+/* AnnexC modulation and bitmap types for the field (adslConnection.modType) */ -+ -+#define kAdslModMask 0x7 -+ -+#define kAdslModGdmt 0 -+#define kAdslModT1413 1 -+#define kAdslModGlite 2 -+#define kAdslModAnnexI 3 -+#define kAdslModAdsl2 4 -+#define kAdslModAdsl2p 5 -+#define kAdslModReAdsl2 6 -+ -+#define kAdslBitmapShift 3 -+#define kAdslBitmapMask kAdslCfgBitmapMask -+#define kAdslDBM (0 << kAdslBitmapShift) -+#define kAdslFBM (1 << kAdslBitmapShift) -+#define kAdslFBMSoL (2 << kAdslBitmapShift) -+ -+#define kAdslUpstreamModeShift 5 -+#define kAdslUpstreamModeMask (3 << kAdslUpstreamModeShift) -+#define kAdslUpstreamModeSingle (0 << kAdslUpstreamModeShift) -+#define kAdslUpstreamModeDouble (1 << kAdslUpstreamModeShift) -+#define kAdslUpstreamModeTriple (2 << kAdslUpstreamModeShift) -+ -+/* AdslLineCodingType definitions */ -+ -+#define kAdslLineCodingOther 1 -+#define kAdslLineCodingDMT 2 -+#define kAdslLineCodingCAP 3 -+#define kAdslLineCodingQAM 4 -+ -+/* AdslLineType definitions */ -+ -+#define kAdslLineTypeNoChannel 1 -+#define kAdslLineTypeFastOnly 2 -+#define kAdslLineTypeIntlOnly 3 -+#define kAdslLineTypeFastOrIntl 4 -+#define kAdslLineTypeFastAndIntl 5 -+ -+typedef struct _adslLineEntry { -+ unsigned char adslLineCoding; -+ unsigned char adslLineType; -+} adslLineEntry; -+ -+ -+/* AdslPhys status definitions */ -+ -+#define kAdslPhysStatusNoDefect (1 << 0) -+#define kAdslPhysStatusLOF (1 << 1) /* lossOfFraming (not receiving valid frame) */ -+#define kAdslPhysStatusLOS (1 << 2) /* lossOfSignal (not receiving signal) */ -+#define kAdslPhysStatusLPR (1 << 3) /* lossOfPower */ -+#define kAdslPhysStatusLOSQ (1 << 4) /* lossOfSignalQuality */ -+#define kAdslPhysStatusLOM (1 << 5) /* lossOfMargin */ -+ -+typedef struct _adslPhysEntry { -+ long adslCurrSnrMgn; -+ long adslCurrAtn; -+ long adslCurrStatus; -+ long adslCurrOutputPwr; -+ long adslCurrAttainableRate; -+} adslPhysEntry; -+ -+#define kAdslPhysVendorIdLen 8 -+#define kAdslPhysSerialNumLen 32 -+#define kAdslPhysVersionNumLen 32 -+ -+typedef struct _adslFullPhysEntry { -+ char adslSerialNumber[kAdslPhysSerialNumLen]; -+ char adslVendorID[kAdslPhysVendorIdLen]; -+ char adslVersionNumber[kAdslPhysVersionNumLen]; -+ long adslCurrSnrMgn; -+ long adslCurrAtn; -+ long adslCurrStatus; -+ long adslCurrOutputPwr; -+ long adslCurrAttainableRate; -+} adslFullPhysEntry; -+ -+/* Adsl channel entry definitions */ -+ -+typedef struct _adslChanEntry { -+ unsigned long adslChanIntlDelay; -+ unsigned long adslChanCurrTxRate; -+ unsigned long adslChanPrevTxRate; -+ unsigned long adslChanCrcBlockLength; -+} adslChanEntry; -+ -+/* Adsl performance data definitions */ -+ -+typedef struct _adslPerfCounters { -+ unsigned long adslLofs; -+ unsigned long adslLoss; -+ unsigned long adslLols; /* Loss of Link failures (ATUC only) */ -+ unsigned long adslLprs; -+ unsigned long adslESs; /* Count of Errored Seconds */ -+ unsigned long adslInits; /* Count of Line initialization attempts (ATUC only) */ -+ unsigned long adslUAS; /* Count of Unavailable Seconds */ -+ unsigned long adslSES; /* Count of Severely Errored Seconds */ -+ unsigned long adslLOSS; /* Count of LOS seconds */ -+ unsigned long adslFECs; /* Count of FEC seconds */ -+} adslPerfCounters; -+ -+typedef struct _adslPerfDataEntry { -+ adslPerfCounters perfTotal; -+ unsigned long adslPerfValidIntervals; -+ unsigned long adslPerfInvalidIntervals; -+ adslPerfCounters perfCurr15Min; -+ unsigned long adslPerfCurr15MinTimeElapsed; -+ adslPerfCounters perfCurr1Day; -+ unsigned long adslPerfCurr1DayTimeElapsed; -+ adslPerfCounters perfPrev1Day; -+ unsigned long adslAturPerfPrev1DayMoniSecs; -+} adslPerfDataEntry; -+ -+#define kAdslMibPerfIntervals 4 -+ -+/* Adsl channel performance data definitions */ -+ -+typedef struct _adslChanCounters { -+ unsigned long adslChanReceivedBlks; -+ unsigned long adslChanTransmittedBlks; -+ unsigned long adslChanCorrectedBlks; -+ unsigned long adslChanUncorrectBlks; -+} adslChanCounters; -+ -+typedef struct _adslChanPerfDataEntry { -+ adslChanCounters perfTotal; -+ unsigned long adslChanPerfValidIntervals; -+ unsigned long adslChanPerfInvalidIntervals; -+ adslChanCounters perfCurr15Min; -+ unsigned long adslPerfCurr15MinTimeElapsed; -+ adslChanCounters perfCurr1Day; -+ unsigned long adslPerfCurr1DayTimeElapsed; -+ adslChanCounters perfPrev1Day; -+ unsigned long adslAturPerfPrev1DayMoniSecs; -+} adslChanPerfDataEntry; -+ -+#define kAdslMibChanPerfIntervals 4 -+ -+/* Adsl trap threshold definitions */ -+ -+#define kAdslEventLinkChange 0x001 -+#define kAdslEventRateChange 0x002 -+#define kAdslEventLofThresh 0x004 -+#define kAdslEventLosThresh 0x008 -+#define kAdslEventLprThresh 0x010 -+#define kAdslEventESThresh 0x020 -+#define kAdslEventFastUpThresh 0x040 -+#define kAdslEventIntlUpThresh 0x080 -+#define kAdslEventFastDownThresh 0x100 -+#define kAdslEventIntlDwonThresh 0x200 -+ -+typedef struct _adslThreshCounters { -+ unsigned long adslThreshLofs; -+ unsigned long adslThreshLoss; -+ unsigned long adslThreshLols; /* Loss of Link failures (ATUC only) */ -+ unsigned long adslThreshLprs; -+ unsigned long adslThreshESs; -+ unsigned long adslThreshFastRateUp; -+ unsigned long adslThreshIntlRateUp; -+ unsigned long adslThreshFastRateDown; -+ unsigned long adslThreshIntlRateDown; -+} adslThreshCounters; -+ -+ -+/* Atm PHY performance data definitions */ -+ -+#define kAtmPhyStateNoAlarm 1 -+#define kAtmPhyStateLcdFailure 2 -+ -+typedef struct _atmPhyDataEntrty { -+ unsigned long atmInterfaceOCDEvents; -+ unsigned long atmInterfaceTCAlarmState; -+} atmPhyDataEntrty; -+ -+typedef struct _adslBertResults { -+ unsigned long bertTotalBits; -+ unsigned long bertErrBits; -+} adslBertResults; -+ -+typedef struct { -+ unsigned long cntHi; -+ unsigned long cntLo; -+} cnt64; -+ -+typedef struct _adslBertStatusEx { -+ unsigned long bertSecTotal; -+ unsigned long bertSecElapsed; -+ unsigned long bertSecCur; -+ cnt64 bertTotalBits; -+ cnt64 bertErrBits; -+} adslBertStatusEx; -+ -+typedef struct _adslDataConnectionInfo { -+ unsigned short K; -+ unsigned char S, R, D; -+} adslDataConnectionInfo; -+ -+typedef struct _adslConnectionInfo { -+ unsigned char chType; /* fast or interleaved */ -+ unsigned char modType; /* modulation type: G.DMT or T1.413 */ -+ unsigned char trellisCoding; /* off(0) or on(1) */ -+ adslDataConnectionInfo rcvInfo; -+ adslDataConnectionInfo xmtInfo; -+} adslConnectionInfo; -+ -+typedef struct _adsl2DataConnectionInfo { -+ unsigned char Nlp; -+ unsigned char Nbc; -+ unsigned char MSGlp; -+ unsigned short MSGc; -+ -+ unsigned long L; -+ unsigned short M; -+ unsigned short T; -+ unsigned short D; -+ unsigned short R; -+ unsigned short B; -+} adsl2DataConnectionInfo; -+ -+typedef struct _adsl2ConnectionInfo { -+ long adsl2Mode; -+ long rcvRate; -+ long xmtRate; -+ unsigned char pwrState; /* Lx state: x = 0..3 */ -+ adsl2DataConnectionInfo rcv2Info; -+ adsl2DataConnectionInfo xmt2Info; -+} adsl2ConnectionInfo; -+ -+typedef struct _adslConnectionDataStat { -+ unsigned long cntRS; -+ unsigned long cntRSCor; -+ unsigned long cntRSUncor; -+ unsigned long cntSF; -+ unsigned long cntSFErr; -+} adslConnectionDataStat; -+ -+typedef struct _adslConnectionStat { -+ adslConnectionDataStat rcvStat; -+ adslConnectionDataStat xmtStat; -+} adslConnectionStat; -+ -+typedef struct _atmConnectionDataStat { -+ unsigned long cntHEC; -+ unsigned long cntOCD; -+ unsigned long cntLCD; -+ unsigned long cntES; -+ unsigned long cntCellTotal; -+ unsigned long cntCellData; -+ unsigned long cntCellDrop; -+ unsigned long cntBitErrs; -+} atmConnectionDataStat; -+ -+typedef struct _atmConnectionStat { -+ atmConnectionDataStat rcvStat; -+ atmConnectionDataStat xmtStat; -+} atmConnectionStat; -+ -+#define kAdslFramingModeMask 0x0F -+#define kAtmFramingModeMask 0xF0 -+#define kAtmHeaderCompression 0x80 -+ -+/* ADSL2 data */ -+ -+typedef struct _adslDiagModeData { -+ long loopAttn; -+ long signalAttn; -+ long snrMargin; -+ long attnDataRate; -+ long actXmtPower; -+ long hlinScaleFactor; -+} adslDiagModeData; -+ -+/* AdslMibGetObjectValue return codes */ -+ -+#define kAdslMibStatusSuccess 0 -+#define kAdslMibStatusFailure -1 -+#define kAdslMibStatusNoObject -2 -+#define kAdslMibStatusObjectInvalid -3 -+#define kAdslMibStatusBufferTooSmall -4 -+#define kAdslMibStatusLastError -4 -+ -+/* Adsl training codes */ -+ -+#define kAdslTrainingIdle 0 -+#define kAdslTrainingG994 1 -+#define kAdslTrainingG992Started 2 -+#define kAdslTrainingG992ChanAnalysis 3 -+#define kAdslTrainingG992Exchange 4 -+#define kAdslTrainingConnected 5 -+ -+/* Global info structure */ -+ -+typedef struct _adslMibInfo { -+ adslLineEntry adslLine; -+ adslPhysEntry adslPhys; -+ adslChanEntry adslChanIntl; -+ adslChanEntry adslChanFast; -+ adslPerfDataEntry adslPerfData; -+ adslPerfCounters adslPerfIntervals[kAdslMibPerfIntervals]; -+ adslChanPerfDataEntry adslChanIntlPerfData; -+ adslChanPerfDataEntry adslChanFastPerfData; -+ adslChanCounters adslChanIntlPerfIntervals[kAdslMibChanPerfIntervals]; -+ adslChanCounters adslChanFastPerfIntervals[kAdslMibChanPerfIntervals]; -+ -+ adslThreshCounters adslAlarm; -+ -+ atmPhyDataEntrty adslChanIntlAtmPhyData; -+ atmPhyDataEntrty adslChanFastAtmPhyData; -+ -+ adslBertResults adslBertRes; -+ -+ adslConnectionInfo adslConnection; -+ adslConnectionStat adslStat; -+ unsigned char adslTrainingState; -+ atmConnectionStat atmStat; -+ -+ adslFullPhysEntry adslAtucPhys; -+ unsigned char adslRxNonStdFramingAdjustK; -+ unsigned char adslFramingMode; -+ adslBertStatusEx adslBertStatus; -+ long afeRxPgaGainQ1; -+ -+ adslDiagModeData adslDiag; -+ adsl2ConnectionInfo adsl2Info; -+ adslPerfCounters adslTxPerfTotal; -+} adslMibInfo; -+ -+#if defined(__cplusplus) -+} -+#endif -+ -+#endif /* AdslMibDefHeader */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/DiagDef.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/DiagDef.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/DiagDef.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/DiagDef.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,209 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+ -+/******************************************************************* -+ * DiagDef.h -+ * -+ * Description: -+ * Diag definitions -+ * -+ * $Revision: 1.22 $ -+ * -+ * $Id: DiagDef.h,v 1.22 2004/10/16 23:43:19 ilyas Exp $ -+ * -+ * $Log: DiagDef.h,v $ -+ * Revision 1.22 2004/10/16 23:43:19 ilyas -+ * Added playback resume command -+ * -+ * Revision 1.21 2004/10/16 23:24:08 ilyas -+ * Improved FileRead command support for LOG file playback (RecordTest on the board) -+ * -+ * Revision 1.20 2004/04/28 16:52:32 ilyas -+ * Added GDB frame processing -+ * -+ * Revision 1.19 2004/03/10 22:26:53 ilyas -+ * Added command-line parameter for IP port number. -+ * Added proxy remote termination -+ * -+ * Revision 1.18 2004/01/24 23:41:37 ilyas -+ * Added DIAG_DEBUG_CMD_LOG_SAMPLES debug command -+ * -+ * Revision 1.17 2003/11/19 02:25:45 ilyas -+ * Added definitions for LOG frame retransmission, time, ADSL2 plots -+ * -+ * Revision 1.16 2003/11/14 18:46:05 ilyas -+ * Added G992p3 debug commands -+ * -+ * Revision 1.15 2003/10/02 19:50:41 ilyas -+ * Added support for buffering data for AnnexI and statistical counters -+ * -+ * Revision 1.14 2003/09/03 19:45:11 ilyas -+ * To refuse connection with older protocol versions -+ * -+ * Revision 1.13 2003/08/30 00:12:39 ilyas -+ * Added support for running chip test regressions via DslDiags -+ * -+ * Revision 1.12 2003/08/12 00:19:28 ilyas -+ * Improved image downloading protocol. -+ * Added DEBUG command support -+ * -+ * Revision 1.11 2003/04/11 00:37:24 ilyas -+ * Added DiagProtoFrame definition -+ * -+ * Revision 1.10 2003/03/25 00:10:07 ilyas -+ * Added command for "long" BERT test -+ * -+ * Revision 1.9 2003/01/30 03:29:32 ilyas -+ * Added PHY_CFG support and fixed printing showtime counters -+ * -+ * Revision 1.8 2002/12/16 20:56:38 ilyas -+ * Added support for binary statuses -+ * -+ * Revision 1.7 2002/12/06 20:19:13 ilyas -+ * Added support for binary statuses and scrambled status strings -+ * -+ * Revision 1.6 2002/11/05 00:18:27 ilyas -+ * Added configuration dialog box for Eye tone selection. -+ * Added Centillium CRC workaround to AnnexC config dialog -+ * Bit allocation update on bit swap messages -+ * -+ * Revision 1.5 2002/07/30 23:23:43 ilyas -+ * Implemented DIAG configuration command for AnnexA and AnnexC -+ * -+ * Revision 1.4 2002/07/30 22:47:15 ilyas -+ * Added DIAG command for configuration -+ * -+ * Revision 1.3 2002/07/15 23:52:51 ilyas -+ * iAdded switch RJ11 pair command -+ * -+ * Revision 1.2 2002/04/25 17:55:51 ilyas -+ * Added mibGet command -+ * -+ * Revision 1.1 2002/04/02 22:56:39 ilyas -+ * Support DIAG connection at any time; BERT commands -+ * -+ * -+ ******************************************************************/ -+ -+#define LOG_PROTO_ID "*L" -+ -+#define DIAG_PARTY_ID_MASK 0x01 -+#define LOG_PARTY_CLIENT 0x01 -+#define LOG_PARTY_SERVER 0x00 -+ -+#define DIAG_DATA_MASK 0x0E -+#define DIAG_DATA_LOG 0x02 -+#define DIAG_DATA_EYE 0x04 -+#define DIAG_DATA_LOG_TIME 0x08 -+ -+#define DIAG_DATA_EX 0x80 -+#define DIAG_PARTY_ID_MASK_EX (DIAG_DATA_EX | DIAG_PARTY_ID_MASK) -+#define LOG_PARTY_SERVER_EX (DIAG_DATA_EX | LOG_PARTY_SERVER) -+ -+#define DIAG_ACK_FRAME_ACK_MASK 0x000000FF -+#define DIAG_ACK_FRAME_RCV_SHIFT 8 -+#define DIAG_ACK_FRAME_RCV_MASK 0x0000FF00 -+#define DIAG_ACK_FRAME_RCV_PRESENT 0x00010000 -+#define DIAG_ACK_TIMEOUT -1 -+#define DIAG_ACK_LEN_INDICATION -1 -+ -+#define LOG_CMD_GDB 236 -+#define LOG_CMD_PROXY 237 -+#define LOG_CMD_RETR 238 -+#define LOG_CMD_DEBUG 239 -+#define LOG_CMD_BERT_EX 240 -+#define LOG_CMD_CFG_PHY 241 -+#define LOG_CMD_RESET 242 -+#define LOG_CMD_SCRAMBLED_STRING 243 -+#define LOG_CMD_EYE_CFG 244 -+#define LOG_CMD_CONFIG_A 245 -+#define LOG_CMD_CONFIG_C 246 -+#define LOG_CMD_SWITCH_RJ11_PAIR 247 -+#define LOG_CMD_MIB_GET 248 -+#define LOG_CMD_LOG_STOP 249 -+#define LOG_CMD_PING_REQ 250 -+#define LOG_CMD_PING_RSP 251 -+#define LOG_CMD_DISCONNECT 252 -+#define LOG_CMD_STRING_DATA 253 -+#define LOG_CMD_TEST_DATA 254 -+#define LOG_CMD_CONNECT 255 -+ -+typedef struct _LogProtoHeader { -+ unsigned char logProtoId[2]; -+ unsigned char logPartyId; -+ unsigned char logCommmand; -+} LogProtoHeader; -+ -+#define LOG_FILE_PORT 5100 -+#define LOG_MAX_BUF_SIZE 1400 -+#define LOG_MAX_DATA_SIZE (LOG_MAX_BUF_SIZE - sizeof(LogProtoHeader)) -+ -+typedef struct { -+ LogProtoHeader diagHdr; -+ unsigned char diagData[LOG_MAX_DATA_SIZE]; -+} DiagProtoFrame; -+ -+#define DIAG_PROXY_TERMINATE 1 -+ -+#define DIAG_DEBUG_CMD_READ_MEM 1 -+#define DIAG_DEBUG_CMD_SET_MEM 2 -+#define DIAG_DEBUG_CMD_RESET_CONNECTION 3 -+#define DIAG_DEBUG_CMD_RESET_PHY 4 -+#define DIAG_DEBUG_CMD_RESET_CHIP 5 -+#define DIAG_DEBUG_CMD_EXEC_FUNC 6 -+#define DIAG_DEBUG_CMD_EXEC_ADSL_FUNC 7 -+#define DIAG_DEBUG_CMD_WRITE_FILE 8 -+#define DIAG_DEBUG_CMD_G992P3_DEBUG 9 -+#define DIAG_DEBUG_CMD_G992P3_DIAG_MODE 10 -+#define DIAG_DEBUG_CMD_CLEAR_TIME 11 -+#define DIAG_DEBUG_CMD_PRINT_TIME 12 -+#define DIAG_DEBUG_CMD_LOG_SAMPLES 13 -+ -+#define DIAG_DEBUG_CMD_PLAYBACK_STOP 14 -+#define DIAG_DEBUG_CMD_PLAYBACK_RESUME 15 -+ -+#define DIAG_DEBUG_CMD_PRINT_STAT 21 -+#define DIAG_DEBUG_CMD_CLEAR_STAT 22 -+ -+typedef struct { -+ unsigned short cmd; -+ unsigned short cmdId; -+ unsigned long param1; -+ unsigned long param2; -+ unsigned char diagData[1]; -+} DiagDebugData; -+ -+#define DIAG_TEST_CMD_LOAD 101 -+#define DIAG_TEST_CMD_READ 102 -+#define DIAG_TEST_CMD_WRITE 103 -+#define DIAG_TEST_CMD_APPEND 104 -+#define DIAG_TEST_CMD_TEST_COMPLETE 105 -+ -+#define DIAG_TEST_FILENAME_LEN 64 -+ -+typedef struct { -+ unsigned short cmd; -+ unsigned short cmdId; -+ unsigned long offset; -+ unsigned long len; -+ unsigned long bufPtr; -+ char fileName[DIAG_TEST_FILENAME_LEN]; -+} DiagTestData; -+ -+typedef struct { -+ unsigned long frStart; -+ unsigned long frNum; -+} DiagLogRetrData; -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/adsldrv.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/adsldrv.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/adsldrv.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/adsldrv.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,203 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/*************************************************************************** -+ * File Name : AdslDrv.h -+ * -+ * Description: This file contains the definitions and structures for the -+ * Linux IOCTL interface that used between the user mode ADSL -+ * API library and the kernel ADSL API driver. -+ * -+ * Updates : 11/02/2001 lkaplan. Created. -+ ***************************************************************************/ -+ -+#if !defined(_ADSLDRV_H_) -+#define _ADSLDRV_H_ -+ -+#if defined(__cplusplus) -+extern "C" { -+#endif -+ -+/* Incldes. */ -+#include -+ -+/* Defines. */ -+#define DSL_IFNAME "dsl0" -+#define ADSLDRV_MAJOR 208 /* arbitrary unused value */ -+ -+#define ADSLIOCTL_CHECK \ -+ _IOR(ADSLDRV_MAJOR, 0, ADSLDRV_STATUS_ONLY) -+#define ADSLIOCTL_INITIALIZE \ -+ _IOWR(ADSLDRV_MAJOR, 1, ADSLDRV_INITIALIZE) -+#define ADSLIOCTL_UNINITIALIZE \ -+ _IOR(ADSLDRV_MAJOR, 2, ADSLDRV_STATUS_ONLY) -+#define ADSLIOCTL_CONNECTION_START \ -+ _IOWR(ADSLDRV_MAJOR, 3, ADSLDRV_STATUS_ONLY) -+#define ADSLIOCTL_CONNECTION_STOP \ -+ _IOR(ADSLDRV_MAJOR, 4, ADSLDRV_STATUS_ONLY) -+#define ADSLIOCTL_GET_PHY_ADDR \ -+ _IOR(ADSLDRV_MAJOR, 5, ADSLDRV_PHY_ADDR) -+#define ADSLIOCTL_SET_PHY_ADDR \ -+ _IOWR(ADSLDRV_MAJOR, 6, ADSLDRV_PHY_ADDR) -+#define ADSLIOCTL_MAP_ATM_PORT_IDS \ -+ _IOWR(ADSLDRV_MAJOR, 7, ADSLDRV_MAP_ATM_PORT) -+#define ADSLIOCTL_GET_CONNECTION_INFO \ -+ _IOR(ADSLDRV_MAJOR, 8, ADSLDRV_CONNECTION_INFO) -+#define ADSLIOCTL_DIAG_COMMAND \ -+ _IOR(ADSLDRV_MAJOR, 9, ADSLDRV_DIAG) -+#define ADSLIOCTL_GET_OBJ_VALUE \ -+ _IOR(ADSLDRV_MAJOR, 10, ADSLDRV_GET_OBJ) -+#define ADSLIOCTL_START_BERT \ -+ _IOR(ADSLDRV_MAJOR, 11, ADSLDRV_BERT) -+#define ADSLIOCTL_STOP_BERT \ -+ _IOR(ADSLDRV_MAJOR, 12, ADSLDRV_STATUS_ONLY) -+#define ADSLIOCTL_CONFIGURE \ -+ _IOR(ADSLDRV_MAJOR, 13, ADSLDRV_CONFIGURE) -+#define ADSLIOCTL_TEST \ -+ _IOR(ADSLDRV_MAJOR, 14, ADSLDRV_TEST) -+#define ADSLIOCTL_GET_CONSTEL_POINTS \ -+ _IOR(ADSLDRV_MAJOR, 15, ADSLDRV_GET_CONSTEL_POINTS) -+#define ADSLIOCTL_GET_VERSION \ -+ _IOR(ADSLDRV_MAJOR, 16, ADSLDRV_GET_VERSION) -+#define ADSLIOCTL_SET_SDRAM_BASE \ -+ _IOR(ADSLDRV_MAJOR, 17, ADSLDRV_SET_SDRAM_BASE) -+#define ADSLIOCTL_RESET_STAT_COUNTERS \ -+ _IOR(ADSLDRV_MAJOR, 18, ADSLDRV_STATUS_ONLY) -+#define ADSLIOCTL_SET_OEM_PARAM \ -+ _IOR(ADSLDRV_MAJOR, 19, ADSLDRV_SET_OEM_PARAM) -+#define ADSLIOCTL_START_BERT_EX \ -+ _IOR(ADSLDRV_MAJOR, 20, ADSLDRV_BERT_EX) -+#define ADSLIOCTL_STOP_BERT_EX \ -+ _IOR(ADSLDRV_MAJOR, 21, ADSLDRV_STATUS_ONLY) -+ -+#define MAX_ADSLDRV_IOCTL_COMMANDS 22 -+ -+/* Typedefs. */ -+typedef struct -+{ -+ BCMADSL_STATUS bvStatus; -+} ADSLDRV_STATUS_ONLY, *PADSLDRV_STATUS_ONLY; -+ -+typedef struct -+{ -+ ADSL_FN_NOTIFY_CB pFnNotifyCb; -+ UINT32 ulParm; -+ adslCfgProfile *pAdslCfg; -+ BCMADSL_STATUS bvStatus; -+} ADSLDRV_INITIALIZE, *PADSLDRV_INITIALIZE; -+ -+typedef struct -+{ -+ ADSL_CHANNEL_ADDR ChannelAddr; -+ BCMADSL_STATUS bvStatus; -+} ADSLDRV_PHY_ADDR, *PADSLDRV_PHY_ADDR; -+ -+typedef struct -+{ -+ UINT16 usAtmFastPortId; -+ UINT16 usAtmInterleavedPortId; -+ BCMADSL_STATUS bvStatus; -+} ADSLDRV_MAP_ATM_PORT, *PADSLDRV_MAP_ATM_PORT; -+ -+typedef struct -+{ -+ ADSL_CONNECTION_INFO ConnectionInfo; -+ BCMADSL_STATUS bvStatus; -+} ADSLDRV_CONNECTION_INFO, *PADSLDRV_CONNECTION_INFO; -+ -+typedef struct -+{ -+ int diagCmd; -+ int diagMap; -+ int logTime; -+ int srvIpAddr; -+ int gwIpAddr; -+ BCMADSL_STATUS bvStatus; -+} ADSLDRV_DIAG, *PADSLDRV_DIAG; -+ -+typedef struct -+{ -+ char *objId; -+ int objIdLen; -+ char *dataBuf; -+ long dataBufLen; -+ BCMADSL_STATUS bvStatus; -+} ADSLDRV_GET_OBJ, *PADSLDRV_GET_OBJ; -+ -+typedef struct -+{ -+ unsigned long totalBits; -+ BCMADSL_STATUS bvStatus; -+} ADSLDRV_BERT, *PADSLDRV_BERT; -+ -+typedef struct -+{ -+ unsigned long totalSec; -+ BCMADSL_STATUS bvStatus; -+} ADSLDRV_BERT_EX, *PADSLDRV_BERT_EX; -+ -+typedef struct -+{ -+ adslCfgProfile *pAdslCfg; -+ BCMADSL_STATUS bvStatus; -+} ADSLDRV_CONFIGURE, *PADSLDRV_CONFIGURE; -+ -+typedef struct -+{ -+ unsigned long testCmd; -+ unsigned long xmtStartTone; -+ unsigned long xmtNumTones; -+ unsigned long rcvStartTone; -+ unsigned long rcvNumTones; -+ char *xmtToneMap; -+ char *rcvToneMap; -+ BCMADSL_STATUS bvStatus; -+} ADSLDRV_TEST, *PADSLDRV_TEST; -+ -+typedef struct -+{ -+ int toneId; -+ ADSL_CONSTELLATION_POINT *pointBuf; -+ int numPoints; -+ BCMADSL_STATUS bvStatus; -+} ADSLDRV_GET_CONSTEL_POINTS, *PADSLDRV_GET_CONSTEL_POINTS; -+ -+typedef struct -+{ -+ adslVersionInfo *pAdslVer; -+ BCMADSL_STATUS bvStatus; -+} ADSLDRV_GET_VERSION, *PADSLDRV_GET_VERSION; -+ -+typedef struct -+{ -+ unsigned long sdramBaseAddr; -+ BCMADSL_STATUS bvStatus; -+} ADSLDRV_SET_SDRAM_BASE, *PADSLDRV_SET_SDRAM_BASE; -+ -+ -+typedef struct -+{ -+ int paramId; -+ void *buf; -+ int len; -+ BCMADSL_STATUS bvStatus; -+} ADSLDRV_SET_OEM_PARAM, *PADSLDRV_SET_OEM_PARAM; -+ -+#if defined(__cplusplus) -+} -+#endif -+ -+#endif // _ADSLDRV_H_ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/atmapidrv.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/atmapidrv.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/atmapidrv.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/atmapidrv.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,212 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+/*************************************************************************** -+ * File Name : AtmApiDrv.h -+ * -+ * Description: This file contains the definitions and structures for the -+ * Linux IOCTL interface that used between the user mode ATM -+ * API library and the kernel ATM API driver. -+ * -+ * Updates : 09/15/2000 lat. Created. -+ ***************************************************************************/ -+ -+#if !defined(_ATMAPIDRV_H_) -+#define _ATMAPIDRV_H_ -+ -+#if defined(__cplusplus) -+extern "C" { -+#endif -+ -+/* Incldes. */ -+#include -+ -+/* Defines. */ -+#define ATMDRV_MAJOR 205 /* arbitrary unused value */ -+ -+#define ATMIOCTL_INITIALIZE \ -+ _IOWR(ATMDRV_MAJOR, 0, ATMDRV_INITIALIZE) -+#define ATMIOCTL_UNINITIALIZE \ -+ _IOR(ATMDRV_MAJOR, 1, ATMDRV_STATUS_ONLY) -+#define ATMIOCTL_GET_INTERFACE_ID \ -+ _IOWR(ATMDRV_MAJOR, 2, ATMDRV_INTERFACE_ID) -+#define ATMIOCTL_GET_TRAFFIC_DESCR_TABLE_SIZE \ -+ _IOR(ATMDRV_MAJOR, 3, ATMDRV_TRAFFIC_DESCR_TABLE_SIZE) -+#define ATMIOCTL_GET_TRAFFIC_DESCR_TABLE \ -+ _IOWR(ATMDRV_MAJOR, 4, ATMDRV_TRAFFIC_DESCR_TABLE) -+#define ATMIOCTL_SET_TRAFFIC_DESCR_TABLE \ -+ _IOWR(ATMDRV_MAJOR, 5, ATMDRV_TRAFFIC_DESCR_TABLE) -+#define ATMIOCTL_GET_INTERFACE_CFG \ -+ _IOWR(ATMDRV_MAJOR, 6, ATMDRV_INTERFACE_CFG) -+#define ATMIOCTL_SET_INTERFACE_CFG \ -+ _IOWR(ATMDRV_MAJOR, 7, ATMDRV_INTERFACE_CFG) -+#define ATMIOCTL_GET_VCC_CFG \ -+ _IOWR(ATMDRV_MAJOR, 8, ATMDRV_VCC_CFG) -+#define ATMIOCTL_SET_VCC_CFG \ -+ _IOWR(ATMDRV_MAJOR, 9, ATMDRV_VCC_CFG) -+#define ATMIOCTL_GET_VCC_ADDRS \ -+ _IOWR(ATMDRV_MAJOR, 10, ATMDRV_VCC_ADDRS) -+#define ATMIOCTL_GET_INTERFACE_STATISTICS \ -+ _IOWR(ATMDRV_MAJOR, 11, ATMDRV_INTERFACE_STATISTICS) -+#define ATMIOCTL_GET_VCC_STATISTICS \ -+ _IOWR(ATMDRV_MAJOR, 12, ATMDRV_VCC_STATISTICS) -+#define ATMIOCTL_SET_INTERFACE_LINK_INFO \ -+ _IOWR(ATMDRV_MAJOR, 13, ATMDRV_INTERFACE_LINK_INFO) -+#define ATMIOCTL_TEST \ -+ _IOWR(ATMDRV_MAJOR, 14, ATMDRV_TEST) -+#define ATMIOCTL_OAM_LOOPBACK_TEST \ -+ _IOWR(ATMDRV_MAJOR, 15, ATMDRV_OAM_LOOPBACK) -+ -+ -+#define MAX_ATMDRV_IOCTL_COMMANDS 16 -+ -+/* Typedefs. */ -+typedef struct -+{ -+ BCMATM_STATUS baStatus; -+} ATMDRV_STATUS_ONLY, *PATMDRV_STATUS_ONLY; -+ -+typedef struct -+{ PATM_INITIALIZATION_PARMS pInit; -+ BCMATM_STATUS baStatus; -+} ATMDRV_INITIALIZE, *PATMDRV_INITIALIZE; -+ -+typedef struct -+{ -+ UINT8 ucPhyPort; -+ UINT8 ucReserved[3]; -+ UINT32 ulInterfaceId; -+ BCMATM_STATUS baStatus; -+} ATMDRV_INTERFACE_ID, *PATMDRV_INTERFACE_ID; -+ -+typedef struct -+{ -+ UINT32 ulTrafficDescrTableSize; -+ BCMATM_STATUS baStatus; -+} ATMDRV_TRAFFIC_DESCR_TABLE_SIZE, *PATMDRV_TRAFFIC_DESCR_TABLE_SIZE; -+ -+typedef struct -+{ -+ PATM_TRAFFIC_DESCR_PARM_ENTRY pTrafficDescrTable; -+ UINT32 ulTrafficDescrTableSize; -+ BCMATM_STATUS baStatus; -+} ATMDRV_TRAFFIC_DESCR_TABLE, *PATMDRV_TRAFFIC_DESCR_TABLE; -+ -+typedef struct -+{ -+ UINT32 ulInterfaceId; -+ PATM_INTERFACE_CFG pInterfaceCfg; -+ BCMATM_STATUS baStatus; -+} ATMDRV_INTERFACE_CFG, *PATMDRV_INTERFACE_CFG; -+ -+typedef struct -+{ -+ ATM_VCC_ADDR VccAddr; -+ PATM_VCC_CFG pVccCfg; -+ BCMATM_STATUS baStatus; -+} ATMDRV_VCC_CFG, *PATMDRV_VCC_CFG; -+ -+typedef struct -+{ -+ UINT32 ulInterfaceId; -+ PATM_VCC_ADDR pVccAddrs; -+ UINT32 ulNumVccs; -+ UINT32 ulNumReturned; -+ BCMATM_STATUS baStatus; -+} ATMDRV_VCC_ADDRS, *PATMDRV_VCC_ADDRS; -+ -+typedef struct -+{ -+ UINT32 ulInterfaceId; -+ PATM_INTERFACE_STATS pStatistics; -+ UINT32 ulReset; -+ BCMATM_STATUS baStatus; -+} ATMDRV_INTERFACE_STATISTICS, *PATMDRV_INTERFACE_STATISTICS; -+ -+typedef struct -+{ -+ ATM_VCC_ADDR VccAddr; -+ PATM_VCC_STATS pVccStatistics; -+ UINT32 ulReset; -+ BCMATM_STATUS baStatus; -+} ATMDRV_VCC_STATISTICS, *PATMDRV_VCC_STATISTICS; -+ -+typedef struct -+{ -+ UINT32 ulInterfaceId; -+ ATM_INTERFACE_LINK_INFO InterfaceCfg; -+ BCMATM_STATUS baStatus; -+} ATMDRV_INTERFACE_LINK_INFO, *PATMDRV_INTERFACE_LINK_INFO; -+ -+typedef struct -+{ -+ ATM_VCC_ADDR VccAddr; -+ UINT32 ulNumToSend; -+ BCMATM_STATUS baStatus; -+} ATMDRV_TEST, *PATMDRV_TEST; -+ -+typedef struct -+{ -+ ATM_VCC_ADDR VccAddr; -+ UINT32 type; -+ BCMATM_STATUS baStatus; -+} ATMDRV_OAM_LOOPBACK, *PATMDRV_OAM_LOOPBACK; -+ -+#define OAM_TYPE_FUNCTION_BYTE_OFFSET 0 -+#define OAM_LB_INDICATION_BYTE_OFFSET 1 -+#define OAM_LB_CORRELATION_TAG_BYTE_OFFSET 2 -+#define OAM_LB_LOCATION_ID_BYTE_OFFSET 6 -+#define OAM_LB_SRC_ID_BYTE_OFFSET 22 -+#define OAM_LB_UNUSED_BYTE_OFFSET 38 -+#define OAM_RDI_UNUSED_BYTE_OFFSET 1 -+#define OAM_LB_CRC_BYTE_OFFSET 46 -+#define OAM_RDI_CRC_BYTE_OFFSET 46 -+#define OAM_LB_CORRELATION_TAG_LEN 4 -+#define OAM_LB_LOCATION_ID_LEN 16 -+#define OAM_LB_SRC_ID_LEN 16 -+#define OAM_LB_UNUSED_BYTE_LEN 8 -+#define OAM_RDI_UNUSED_BYTE_LEN 45 -+#define OAM_LB_CRC_BYTE_LEN 2 -+#define OAM_RDI_CRC_BYTE_LEN 2 -+#define OAM_FAULT_MANAGEMENT_LB 0x18 -+#define OAM_FAULT_MANAGEMENT_RDI 0x11 -+#define OAM_FAULT_MANAGEMENT_LB_REQUEST 1 -+#define OAM_FAULT_MANAGEMENT_LB_RESPOND 0 -+#define OAM_FAULT_MANAGEMENT_CORRELATION_VAL 0xbcbcbcbc -+#define OAM_FAULT_MANAGEMENT_SRC_ID_3 0xffffffff -+#define OAM_FAULT_MANAGEMENT_SRC_ID_2 0xffffffff -+#define OAM_FAULT_MANAGEMENT_SRC_ID_1 0xffffffff -+#define OAM_FAULT_MANAGEMENT_SRC_ID_0 0xffffffff -+#define OAM_FAULT_MANAGEMENT_LOCATION_ID_3 0xffffffff -+#define OAM_FAULT_MANAGEMENT_LOCATION_ID_2 0xffffffff -+#define OAM_FAULT_MANAGEMENT_LOCATION_ID_1 0xffffffff -+#define OAM_FAULT_MANAGEMENT_LOCATION_ID_0 0xffffffff -+#define OAM_LB_UNUSED_BYTE_DEFAULT 0x6a -+#define OAM_LB_SEGMENT_TYPE 0 -+#define OAM_LB_END_TO_END_TYPE 1 -+#define OAM_F4_LB_SEGMENT_TYPE 2 -+#define OAM_F4_LB_END_TO_END_TYPE 3 -+#define RM_PROT_ID_OFFSET 0 -+#define RM_MESSAGE_TYPE_OFFSET 1 -+#define RM_PROTOCOL_ID 1 -+#define RM_TYPE_DEFAULT 0x20 /* forward/source_generated/congested */ -+#define RM_UNUSED_BYTES_OFFSET 2 -+#define RM_UNUSED_BYTES_LEN 46 -+#if defined(__cplusplus) -+} -+#endif -+ -+#endif // _ATMAPIDRV_H_ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/atmdiag.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/atmdiag.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/atmdiag.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/atmdiag.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,764 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+ -+#ifndef __ATMDIAG_H__ -+#define __ATMDIAG_H__ -+ -+//#define BRCM_6348 -+ -+#if defined(__cplusplus) -+extern "C" { -+#endif -+ -+#define ATM_DIAG_FAIL -1 -+#define ATM_DIAG_PASS 0 -+#define ATM_REGADDR 0xFFFE4000 -+#define ATM_REGSIZE 0x800 -+#define ATM_TX_VPI_VCI_CAM_OFFSET 0x500 -+#define ATM_RX_VPI_VCI_CAM_OFFSET 0x600 -+#define ATM_TRAFFIC_SHAPER_OFFSET 0x700 -+#define ATM_TX_STATUS_OFFSET 0x40c -+#define ATM_RX_STATUS_OFFSET 0x41c -+#define ATM_RX_AAL_STATUS_OFFSET 0x428 -+#define ATM_MIP_COUNTERS_OFFSET 0x440 -+#define ATM_UTOPIA_SETTING_OFFSET 0x42c -+#define ATM_ADSL_PHY_PORT_SETTING 0x15c -+#define UT_MAX_TDT_ENTRIES 2 -+#define UT_MAX_MGMT_ENTRIES 4 -+#define UT_LINE_RATE (146200000) /* 344811 cells/sec, CIT = 29ns */ -+#define UT_CELL_RATE (53 * 8) -+#define UT_MIN_PCR_SCR 310 /* ~128Kbps */ -+#define UT_MAX_PCR_SCR 344811 /* ~146.2Kpbs */ -+#define UT_MIN_MBS 2 -+#define UT_MAX_MBS 200000 -+ //#ifdef BRCM_6348 currently, the driver only support 8 VCCS -+ //#define UT_MAX_VCCS 16 -+ //#else -+#define UT_MAX_VCCS 8 -+ //#endif -+#define UT_MAX_PHY_PORTS 2 -+#define UT_BASE_PORT_NUMBER 1 -+#define UT_MIN_QUEUE 1 -+#define UT_MAX_QUEUE UT_MAX_VCCS -+#define UT_MULTI_QUEUE 1 -+#define UT_SINGLE_QUEUE 0 -+#define UT_MIN_PRIORITY 1 -+#define UT_MAX_PRIORITY 4 /* priority ranging from 1-4 */ -+#define UT_BUFFER_SIZE 20 -+#define UT_MGMT_IDX 6 -+#define UT_ENABLED 1 -+#define UT_DISABLED 0 -+#define UT_MAX_TD_INDEX UT_MAX_VCCS -+#define UT_SSTED_TRAILER_SIZE 8 -+#define UT_DIALED_DIGITS 2 -+#define UT_FREE_CELL_Q_SIZE 800 -+#define UT_FREE_PKT_Q_SIZE 800 -+#define UT_FREE_PKT_Q_BUF_SIZE 1600 -+#define UT_RX_PKT_Q_SIZE 800 -+#define UT_RX_CELL_Q_SIZE 800 -+#define UT_AAL5_MAX_SDU_LENGTH 65535 -+#define UT_TX_FIFO_PRIORITY 4 -+#define UT_MIN_DATA_LEN 48 -+#define UT_MAX_DATA_LEN 1500 -+#define UT_BASE_VPI_NUMBER 0 -+#define UT_MAX_VPI_NUMBER 256 -+#define UT_BASE_VCI_NUMBER 32 -+#define UT_MAX_VCI_NUMBER 65536 -+#define UT_UTOPIA_MODE 1 -+#define UT_ADSL_MODE 0 -+#define UT_UTOPIA_ADSL_MODE 0x11 /* utopia port 0, adsl port 1 */ -+#define UT_TOGGLE_DISPLAY_MODE 1 -+#define UT_TOGGLE_CAPTURE_MODE 0 -+#define UT_TOGGLE_VERIFICATION_MODE 2 -+#define UT_TOGGLE_MODE_ON 1 -+#define UT_TOGGLE_MODE_OFF 0 -+#define UT_DUMP_TX_VPI_VCI_TABLE 1 -+#define UT_DUMP_RX_VPI_VCI_TABLE 2 -+#define UT_DISPLAY_STATS 1 -+#define UT_CLEAR_STATS 2 -+#define UT_TRAFFIC_DESCRIPTOR_DISPLAY 1 -+#define UT_TRAFFIC_DESCRIPTOR_MODIFY 2 -+#define UT_PORT_UTOPIA_SETTING 1 -+#define UT_GLOBAL_UTOPIA_SETTING 2 -+#define UT_DISPLAY_CAPTURED 0 -+#define UT_ERASE_CAPTURED 1 -+#define UT_CAPTURED_ERROR_STATS 2 -+#define UT_PATTERN_INCREMENT 1 -+#define UT_PATTERN_FIX 0 -+#define UT_MODIFY_OPERATION 1 -+#define UT_DISPLAY_OPERATION 0 -+#define DIAG_ATM_MODULE "bcmatmtest" -+#define DIAG_ATM_PROC "/proc/atmtest" -+ -+/* command is made up of 2_bytes_command|2_bytes_index */ -+/* index is ranging from 0-7 for 8 VCs */ -+#define UT_PROC_CMD_ADD_VC 1 -+#define UT_PROC_CMD_DELETE_VC 2 -+#define UT_PROC_CMD_START_SEND_VC 3 -+#define UT_PROC_CMD_SEND_MULTI_VC 4 -+#define UT_PROC_CMD_STOP_SEND_VC 5 -+#define UT_PROC_CMD_CAPTURE 6 -+#define UT_PROC_CMD_TOGGLE 7 -+#define UT_PROC_CMD_GET_STATS 8 -+#define UT_PROC_CMD_CLEAR_STATS 9 -+#define UT_PROC_CMD_SEND_MULTI_PRIORITY 10 -+#define UT_PROC_CMD_MODIFY_TRAFFIC_SHAPER 11 -+#define UT_PROC_CMD_START_SEND_ALL_VC 12 -+#define UT_PROC_CMD_ADSL_LOOPBACK 13 -+#define UT_PROC_CMD_SEND_MANAGEMENT 14 -+#define UT_PROC_CMD_ADD_MPVC 15 -+#define UT_PROC_CMD_DELETE_MPVC 16 -+#define UT_PROC_CMD_START_SEND_MPVC 17 -+#define UT_PROC_CMD_UTOPIA_SET 18 -+ -+#define UT_OAM_LB_END_TO_END 10 /* was 1 */ -+#define UT_OAM_LB_SEGMENT 11 /* was 2 */ -+#define UT_OAM_RDI_END_TO_END 3 -+#define UT_OAM_RDI_SEGMENT 4 -+#define UT_VPC_RM_TYPE 5 -+#define UT_VCC_RM_TYPE 6 -+#define UT_OAM_CRC10_SOFTWARE 0 -+#define UT_OAM_CRC10_HARDWARE 1 -+#define UT_TOGGLE_DISPLAY 0 -+#define UT_TOGGLE_CAPTURE 1 -+#define UT_TOGGLE_VERIFY 2 -+ -+#define AP_REG_OFFSET_END 0x7ff -+#define AP_INDIRECT_RAM_ADDRESS_REG ATM_PROCESSOR_BASE + 0x7c0 -+#define AP_INDIRECT_RAM_REG ATM_PROCESSOR_BASE + 0x7c4 -+#define AP_IRQ_MASK AP_INTR_REGS_BASE+0x4 -+#define AP_IRQ_STATUS AP_INTR_REGS_BASE -+#define AP_ROUTE_OAM_TO_RCQ 0 -+#define AP_ROUTE_OAM_TO_MCF 1 -+#define AP_IR_ASSERT 1 -+#define AP_IR_DEASSERT 0 -+#define AP_RX_STATUS_ERR_MASK 0x32ecc /* mask out idleCell, vc & unused */ -+#define AP_RX_AAL_STATUS_ERR_MASK 0x3008 /* only look at rx router stats, discard */ -+ -+typedef struct utVccCfg { -+ UINT8 ulAalType; -+ UINT8 ulAtmVccCpcsAcceptCorruptedPdus; -+}UT_VCC_CFG, *pUT_VCC_CFG; -+ -+typedef struct utTrafficDescrParmEntry { -+ UINT32 ulTrafficDescrIndex; -+ UINT32 ulTrafficDescrType; -+ UINT32 ulTrafficDescrParm1; -+ UINT32 ulTrafficDescrParm2; -+ UINT32 ulTrafficDescrParm3; -+ UINT32 ulTrafficDescrParm4; -+ UINT32 ulTrafficDescrParm5; -+ UINT32 ulTrafficDescrRowStatus; -+ UINT32 ulServiceCategory; -+}UT_TRAFFIC_DESCR_PARM_ENTRY,*pUT_TRAFFIC_DESCR_PARM_ENTRY; -+ -+typedef struct utMultiSendInfo { -+ UINT32 len; -+ UINT8 pattern; -+ UINT8 dataByte; -+ UINT32 numSent; -+ UINT32 rate; -+ UINT8 circuitType; -+ UINT32 cellsPerPdu; -+ UINT32 delay; -+ UINT32 txCount; -+}UT_MULTISEND_INFO, *pUT_MULTISEND_INFO; -+ -+typedef struct utUserSendInfo { -+ UINT32 len; -+ UINT8 incremental; -+ UINT8 dataByte; -+ UINT32 rate; -+ UINT32 aalType; -+ UINT32 delay; -+ UINT32 txCount; /* number of cells/pkt user want to send */ -+ UINT8 multiQPriority; -+ UINT8 basePriority; -+ UINT8 numOfQueues; -+}UT_USER_SEND_INFO, *pUT_USER_SEND_INFO; -+ -+typedef struct utVccAddrInfo { -+ ATM_VCC_ADDR vccAddr; -+ UINT8 priority; /* priority of the queue of this VCC */ -+ UINT8 numOfQueues; -+}UT_VCC_ADDR_INFO, *pUT_VCC_ADDR_INFO; -+ -+typedef struct utVccListInfo { -+ UINT32 handle; -+ UINT32 managementHandle; -+}UT_VCC_LIST_INFO, *pUT_VCC_LIST_INFO; -+ -+typedef struct atmCaptureHdr { -+ UINT8 valid; -+ UINT8 vpi; -+ UINT16 vci; -+ UINT8 circuitType; -+ UINT8 cid; -+ UINT8 uuData8; -+ UINT8 uuData5; -+ UINT8 ucFlags; -+ UINT32 dataLen; -+ UINT8 *dataPtr; -+ UINT8 interface; -+} ATM_CAPTURE_HDR, *pATM_CAPTURE_HDR; -+ -+typedef struct atmTxBufferHdr { -+ ATM_VCC_DATA_PARMS dataParms; -+ struct atmTxBufferHdr *next; -+} ATM_TX_BUFFER_HDR, *pATM_TX_BUFFER_HDR; -+ -+typedef struct tx_buffer_list{ -+ pATM_TX_BUFFER_HDR headPtr; -+ pATM_TX_BUFFER_HDR tailPtr; -+ UINT32 len; -+ UINT32 seqNumber; -+ UINT32 lastSent; -+ UINT32 sentInterval; -+ UINT32 cellsPerPdu; -+} ATM_TX_BUFFER_LIST, *pATM_TX_BUFFER_LIST; -+ -+typedef struct atmTestError { -+ UINT32 total; -+ UINT32 data_err; -+ UINT32 data_length; -+ UINT32 sequence_err; -+ UINT32 aalCrcError; -+ UINT32 aalCpcsLen0; -+ UINT32 aalLenError; -+ UINT32 aalSduLenError; -+ UINT32 gfc; -+ UINT32 crc; -+ UINT32 pti; -+ UINT32 pmi_2sml; -+ UINT32 pmi_2big; -+ UINT32 vcam_mme; -+ UINT32 pne; -+ UINT32 came_1; -+ UINT32 came_0; -+ UINT32 dc_1; -+ UINT32 dc_0; -+ UINT32 ec_1; -+ UINT32 ec_0; -+ UINT32 aal5_drop_cell; -+ UINT32 routerDiscard_1; -+ UINT32 routerDiscard_0; -+ UINT32 camLkup; -+ UINT32 idle; -+ UINT32 hec; -+} ATM_TEST_ERROR, *pATM_TEST_ERROR; -+ -+typedef struct atmMibStats { -+ UINT32 tx_aal5_0; -+ UINT32 tx_aal5_1; -+ UINT32 tx_aal0_0; -+ UINT32 tx_aal0_1; -+ UINT32 rx_aal5_0; -+ UINT32 rx_aal5_1; -+ UINT32 rx_aal0_0; -+ UINT32 rx_aal0_1; -+} ATM_MIB_STATS, *pATM_MIB_STATS; -+ -+/* These are from TX status register; they are collected every 1 second interval */ -+typedef struct atmTxStats { -+ UINT32 fifoFull; /* fifoFull_port0 */ -+ UINT32 aal2bigErr; -+ UINT32 aal5LenErr; -+ UINT32 aal5MaxLenErr; -+ UINT32 droppedCellErr; /* tx aal or tx atm dropped cell port 0 */ -+ UINT32 aal5PortNotEnableErr; /* pne_err_port0 */ -+ UINT32 fifoFullErr; /* ff_err_port0 */ -+ UINT32 aal5CountErr; -+} ATM_TX_STATS, *pATM_TX_STATS; -+ -+/* these are from RX ATM and RX AAL status registers */ -+typedef struct atmRxStats { -+ UINT32 gfcErr; -+ UINT32 crcErr; -+ UINT32 ptiErr; -+ UINT32 vcamMmErr; /* vcam_mme VCAM multiple match error */ -+ UINT32 camLookupErr; /* came_port0 */ -+ UINT32 portNotEnableErr; /* pne_err */ -+ UINT32 discardErr; /* dc_port0 */ -+ UINT32 errCellErr; /* ec_port0 */ -+ UINT32 routerDrop; /* rxRouterStat_port0 */ -+ UINT32 aalDrop; /* aal5d */ -+#ifdef BRCM_6348 -+ UINT32 overflowErr; -+ UINT32 uto2small; -+ UINT32 uto2big; -+#endif -+} ATM_RX_STATS, *pATM_RX_STATS; -+ -+typedef struct atmStats -+{ -+ ATM_MIB_STATS mibStats; -+ ATM_TX_STATS txStats; -+ ATM_RX_STATS rxStats; -+}ATM_STATS, *pATM_STATS; -+ -+typedef struct atm_test_tx_info { -+ UINT32 index; -+ UINT32 len; -+ UINT32 lineTxInterval; -+ UINT32 count; -+ UINT8 incremental; -+ UINT8 dataByte; -+ UINT8 aalType; -+ UINT8 numOfQueues; -+ UINT8 basePriority; -+ UINT32 handle; -+ UINT32 rate; -+ UINT32 sending; -+ UINT8 managementType; /* f4, f5, rm */ -+ UINT8 interleaveManagement; -+ UINT16 managementVpi; -+ UINT16 managementVci; -+ UINT16 managementCrc; -+ UINT32 managementInterface; -+} ATM_TEST_TX_INFO, *pATM_TEST_TX_INFO; -+ -+typedef struct atm_test_info { -+ ATM_TEST_TX_INFO atmTestTxInfo[UT_MAX_VCCS+1]; /* one extra for f4 since it doesn't -+ have a vcc created, index is last one */ -+ UT_TRAFFIC_DESCR_PARM_ENTRY ms_Tdt[UT_MAX_TD_INDEX]; -+ UT_VCC_CFG ms_VccCfgs[UT_MAX_VCCS]; -+ UT_VCC_ADDR_INFO ms_VccAddrs[UT_MAX_VCCS]; -+ UINT32 commandStatus; /* command-2 bytes, status 2 bytes */ -+ ATM_TEST_ERROR m_ucTestError[UT_MAX_VCCS+1]; -+ ATM_STATS atmStats; -+ UINT8 displayData; /* current mode: 0=disable, 1=enable */ -+ UINT8 captureData; /* current mode: 0=disable, 1=enable */ -+ UINT8 verifyData; /* current mode: 0=disable, 1=enable */ -+ UINT32 pduSent[UT_MAX_VCCS+1]; /* one extra for f4 */ -+ UINT32 pduReceived[UT_MAX_VCCS+1]; -+ UINT32 multiPriority; -+} ATM_TEST_INFO, *pATM_TEST_INFO; -+ -+typedef struct atm_verfication_info { -+ int seqNumber; -+ UINT8 incremental; -+ UINT8 dataByte; -+ int len; -+} ATM_VERIFICATION_INFO, *pATM_VERIFICATION_INFO; -+ -+typedef struct atm_data_struct { -+ PATM_VCC_DATA_PARMS data; -+ ATM_VCC_ADDR vccAddr; -+} ATM_DATA_STRUCT, *PATM_DATA_STRUCT; -+ -+typedef struct atmDiagCb { -+ ATM_TRAFFIC_DESCR_PARM_ENTRY ms_Tdt[UT_MAX_TD_INDEX]; -+ ATM_VCC_CFG ms_VccCfgs[UT_MAX_VCCS]; -+ UT_VCC_ADDR_INFO ms_VccAddrs[UT_MAX_VCCS]; -+ UINT32 ms_multiPriority[UT_MAX_VCCS]; -+ ATM_TX_BUFFER_LIST mTxHdrQ[UT_MAX_VCCS+1]; /* tx Q; an extra one for f4 cells */ -+ UT_VCC_LIST_INFO m_ulVccList[UT_MAX_VCCS+1]; /* tx Q; an extra one for f4 cells */ -+ UINT32 managementHandle_port0; -+ UINT32 managementHandle_port1; -+ UINT32 rxTaskId; -+ UINT32 txTaskId; -+ UINT32 statsTaskId; -+ UINT32 rxTaskSem; /* protect Rx Q */ -+ UINT32 txTaskSem; /* protect Tx Q */ -+ UINT32 rxQMuSem; /* rx task semphore */ -+ UINT32 txQMuSem; /* tx task semphore */ -+ UINT32 txTaskExit; /* clean up purpose */ -+ UINT32 rxTaskExit; /* clean up purpose */ -+ ATM_DATA_STRUCT m_pDpHead; /* rx Q */ -+ ATM_DATA_STRUCT m_pDpTail; /* rx Q */ -+ UINT8 displayData; /* 1 to display rx data on screen; default is 0 */ -+ UINT8 captureData; -+ UINT8 verifyData; -+ ATM_CAPTURE_HDR m_ulData[UT_BUFFER_SIZE]; -+ int m_ulBufferPosition; -+ UINT32 m_ulCurSeqNumber; -+ ATM_TEST_ERROR m_ucTestError[UT_MAX_VCCS+1]; -+ ATM_STATS m_atmStats; -+ ATM_VERIFICATION_INFO dataVerficationInfo[UT_MAX_VCCS]; -+ UINT8 txStop; -+} ATM_DIAG_CB, *pATM_DIAG_CB; -+ -+/* 0xfffe15c */ -+typedef union phyLastDescConfig { -+ struct { -+ UINT32 unused:22; -+ UINT32 rxCfg:2; -+ UINT32 unused1:2; -+ UINT32 txCfg:2; -+ UINT32 numRxDesc:2; -+ UINT32 numTxDesc:2; -+ }bit; -+ UINT32 reg; -+} PHY_LAST_DESC_CONFIG, *pPHY_LAST_DESC_CONFIG; -+ -+/* 0xfffe4500-0xfffe45ff */ -+typedef union txAtmVpiVciTable { -+ struct { -+ UINT32 unused:6; -+ UINT32 swFlags:1; -+ UINT32 crcEnable:1; -+ UINT32 vpi: 8; -+ UINT32 vci:16; -+ }bit; -+ UINT32 entry; -+} TX_ATM_VPI_VCI_TABLE, *pTX_ATM_VPI_VCI_TABLE; -+ -+/* 0xfffe4600-0xfffe46ff */ -+typedef union RxAtmVpiVciTable { -+ struct { -+ UINT32 unused:6; -+ UINT32 valid:1; -+ UINT32 vpi:8; -+ UINT32 vci:16; -+ UINT32 port:1; -+ } camSide; /* even; */ -+ struct { -+ UINT32 unused:21; -+ UINT32 userDataIR:1; /* assert IR for user data immediate response */ -+ UINT32 oamIR:1; /* assert IR for OAM immediate response */ -+ UINT32 rmIR:1; /* assert IR for RM immediate response */ -+ UINT32 vcId:3; /* VCID */ -+ UINT32 userDataCrcEnable:1; -+ UINT32 oamRouteCode:1; /* 0=route to rx cell q; 1= route to rx mips cell fifo */ -+ UINT32 udrc:1; /* User Data Routing Code */ -+ UINT32 circuitType:2; -+ } ramSide; /* odd; */ -+ UINT32 entry; -+} RX_ATM_VPI_VCI_TABLE, *pRX_ATM_VPI_VCI_TABLE; -+ -+/* 6345; 0xfffe4300- 0xfffe43ff */ -+typedef union atmIntrRegs { -+ struct { -+ UINT32 unused:20; -+ UINT32 vcamMm:1; /* RX VCAM multiple match */ -+ UINT32 rxRtDc:1; /* Rx Router discard cell due to full rx buffer */ -+ UINT32 rpqIr:1; /* Receive Packet Queue got a packet tagged with immediate response */ -+ UINT32 rcqIr:1; /* Receive Cell Queue got a cell tagged with immediate response */ -+ UINT32 rpqWd:1; /* RX Pkt Q watchdog- no pkt rxed for the duration defined in RCQ wd timer */ -+ UINT32 rcqWd:1; /* RX Cell Q watchdog */ -+ UINT32 mibHf:1; /* one or more of the MIB coutners is half full */ -+ UINT32 fpqAe:1; /* Free Packet Queue almost empty- has fewer buffers than FPQ watermark */ -+ UINT32 rpqAf:1; /* Rx Packet Queue has exceeded RPQ watermark */ -+ UINT32 fcqAe:1; /* Free Cell Queue almost Empty */ -+ UINT32 rcqAf:1; /* Rx Cell Q almost full */ -+ UINT32 txs:1; /* Tx SDRAM Interrupt- one of the TX SDRAM sub-channels intr is set */ -+ }statusMaskBit; /* status & interrupt mask */ -+#ifdef BRCM_6348 -+ struct { -+ UINT32 unused1:8; -+ UINT32 sdqMask:8; /* TX SDRAM watchdog timer interrupt */ -+ UINT32 unused:4; -+ UINT32 irqMask:12; -+ }irqMaskBit; -+ struct { -+ UINT32 unused:28; -+ UINT32 sdWd:4; /* TX SDRAM Watchdog */ -+ }txSdramValue; -+#else /* 6345 */ -+ struct { -+ UINT32 unused:16; -+ UINT32 irqMask:16; -+ }irqMaskBit; -+#endif /* BRCM_6348 */ -+ struct { -+ UINT32 fcqAeWm:16; /* Free Cell Q almost empty watermark */ -+ UINT32 rcqAfWm:16; /* Rx Cell Q almost full watermark */ -+ }rxCellQBit; -+ struct { -+ UINT32 fpqAeWm:16; /* Free Packet Q almost empty watermark */ -+ UINT32 rpqAfWm:16; /* Rx Paket Q almost full watermark */ -+ }rxPktQBit; -+ struct { -+ UINT32 pktWdTo:16; /* Watchdog timeout value in 50 uSec increments */ -+ UINT32 cellWdTo:16; /* Watchdog timeout value in 50 uSec increments */ -+ }rxWdTimer; -+} ATM_INTR_REGS, *pATM_INTR_REGS; -+ -+/* 0xfffe4700-0xfffe47ff */ -+typedef union atmShaperCtrlReg { -+#ifdef BRCM_6348 -+ struct { -+ UINT32 unused:7; -+ UINT32 rst:1; /* reset shaper */ -+ UINT32 pcr:12; /* peak cell rate */ -+ UINT32 mpEn:1; /* Multi-priority enabled */ -+ UINT32 priority:2; /* source scheduling sub-priority */ -+ UINT32 mcrEnable:1;/* Minimum Cell Rate Enabled */ -+ UINT32 alg:2; /* source shaping algorithm */ -+ UINT32 pid:1; /* Source destination Port ID */ -+ UINT32 vcid:4; /* source VC ID */ -+ UINT32 enable:1; /* source shaper enable */ -+ }bit; -+#else /* 6345 */ -+ struct { -+ UINT32 unused:9; -+ UINT32 rst:1; /* reset shaper */ -+ UINT32 pcr:12; /* peak cell rate */ -+ UINT32 mpEn:1; /* Multi-priority enabled */ -+ UINT32 priority:2; /* source scheduling sub-priority */ -+ UINT32 alg:2; /* source shaping algorithm */ -+ UINT32 pid:1; /* Source destination Port ID */ -+ UINT32 vcid:3; /* source VC ID */ -+ UINT32 enable:1; /* source shaper enable */ -+ }bit; -+#endif /* BRCM_6348 */ -+ UINT32 entry; -+} ATM_SHAPER_CTRL_REG, *pATM_SHAPER_CTRL_REG; -+ -+typedef union atmShaperVbrReg { -+ struct { -+ UINT32 unused:1; -+ UINT32 bt:19; -+ UINT32 scr:12; -+ }bit; -+ UINT32 entry; -+} ATM_SHAPER_VBR_REG, *pATM_SHAPER_VBR_REG; -+ -+#ifdef BRCM_6348 -+typedef union atmShaperMcrReg { -+ struct { -+ UINT32 unused:20; -+ UINT32 mcr:12; -+ }bit; -+ UINT32 entry; -+} ATM_SHAPER_MCR_REG, *pATM_SHAPER_MCR_REG; -+#endif /* BRCM_6348 */ -+ -+typedef union atmCellHdr { -+ struct { -+ UINT32 gfc:4; -+ UINT32 msb_vpi:4; -+ UINT32 vpi:4; -+ UINT32 msb_vci:4; -+ UINT32 vci:8; -+ UINT32 lsb_vci:4; -+ UINT32 pt:3; -+ UINT32 clp:1; -+ }bit; -+ UINT32 word1; -+} ATM_CELL_HDR, *pATM_CELL_HDR; -+#define ATM_RX_AAL_STATUS_ERROR_MASK_PORT0 0x108 -+ -+/* 0xfffe4428 */ -+typedef union atmRxAalStatusReg { -+ struct { -+ UINT32 unused:22; -+ UINT32 rxRouterStat_port1:1; /* RX cells dropped due to full cell buffer; */ -+ UINT32 rxRouterStat_port0:1; /* bit 8=port 0 fifo rx drop cell */ -+ UINT32 aal0ccnt_port1:1; /* aal0 cell count has been incremented; bit 4=port0 */ -+ UINT32 aal0ccnt_port0:1; /* aal0 cell count has been incremented; bit 4=port0 */ -+ UINT32 aal5ccnt_port1:1; /* aal5 cell count has been incremented; bit 4=port0 */ -+ UINT32 aal5ccnt_port0:1; /* aal5 cell count has been incremented; bit 4=port0 */ -+ UINT32 aal5d:1; /* aal5 dropped cells */ -+ UINT32 aal5p:1; /* aal5 pdu received */ -+ UINT32 aalxp:1; /* non aal5 received */ -+ UINT32 aal5c:1; /* aal5 received cells */ -+ }bit; -+ UINT32 reg; -+} ATM_RX_AAL_STATUS_REG, *pATM_RX_AAL_STATUS_REG; -+/* 0xfffe441c */ -+#define ATM_RX_STATUS_ERROR_MASK_PORT0 0x32354 -+typedef union atmRxStatusReg { -+ struct { -+ UINT32 unused:14; -+ UINT32 gfc_err:1; /* non zero gfc detected */ -+ UINT32 crc_err:1; /* CRC-10 error detected on OAM/RM cells */ -+#ifdef BRCM_6348 -+ UINT32 rx_flow_err:1; /* Receive cell dropped by RXATM layer 'cause RX cell FIFO full */ -+#else /* 6345 */ -+ UINT32 unused1:1; -+#endif -+ UINT32 idle_err:1; /* Idle cell detected */ -+ UINT32 pti_err:1; /* PTI Error detected (i.e. PT=binary 111) */ -+#ifdef BRCM_6348 -+ UINT32 unused2:1; -+ UINT32 uto2small:1;/* Too small of a cell from RX Utopia */ -+ UINT32 uto2big:1; /* Too big of a cell from RX Utopia */ -+#else /* BRCM_6345 */ -+ UINT32 unused2:3; -+#endif -+ UINT32 vcam_mme:1; /* VCAM multiple match error */ -+ UINT32 pne_err:1; /* port not enable error */ -+ UINT32 came_port1:1; /* PER port cam lookup error; bit6=port 0 */ -+ UINT32 came_port0:1; /* PER port cam lookup error; bit6=port 0 */ -+ UINT32 dc_port1:1; /* per port dropped cell; bit 4= port 0 */ -+ UINT32 dc_port0:1; /* per port dropped cell; bit 4= port 0 */ -+ UINT32 ec_port1:1; /* per port erred cell; bit 2=port 0 */ -+ UINT32 ec_port0:1; /* per port erred cell; bit 2=port 0 */ -+ UINT32 vc_port1:1; /* per port valid cell; bit 0=port 0 */ -+ UINT32 vc_port0:1; /* per port valid cell; bit 0=port 0 */ -+ }bit; -+ UINT32 reg; -+} ATM_RX_STATUS_REG, *pATM_RX_STATUS_REG; -+ -+#define ATM_TX_STATUS_ERROR_MASK_PORT0 0x41e80c54 -+typedef union atmTxStatusReg { -+ struct { -+ UINT32 fifoFull_port1:1; /* per port FIFO Full Status (1=full) */ -+ UINT32 fifoFull_port0:1; /* per port FIFO Full Status (1=full) */ -+ UINT32 unused:1; -+ UINT32 aal0_port1:1; /* aal0_port1 tx */ -+ UINT32 aal0_port0:1; /* aal0_port0 tx */ -+ UINT32 aal5_port1:1; /* aal5_port1 tx */ -+ UINT32 aal5_port0:1; /* aal5_port0 tx */ -+ UINT32 aal2big:1; /* aal too big cell input */ -+ UINT32 aal5liErr:1;/* aal5 length indicator error */ -+ UINT32 aal5mlErr:1;/* aal5 max length error */ -+ UINT32 aal5ctErr:1;/* aal5 count error */ -+ UINT32 unused1:1; -+ UINT32 aal5d:1; /* aal5 drop cell */ -+ UINT32 aal5p:1; /* aal5 pdu passed */ -+ UINT32 aalxc:1; /* non aal5 cell passed */ -+ UINT32 aal5c:1; /* aal cell passed */ -+ UINT32 dropCell_port1:1; /* tx aal or tx atm dropped cell */ -+ UINT32 dropReq_port1:1; /* one of the port dropped request */ -+ UINT32 scheCell_port1:1; /* per port scheduled cell */ -+ UINT32 sit_port1:1; /* per port schedule interval timer count event */ -+ UINT32 dropCell_port0:1; /* tx aal or tx atm dropped cell */ -+ UINT32 dropReq_port0:1; /* one of the port dropped request */ -+ UINT32 scheCell_port0:1; /* per port scheduled cell */ -+ UINT32 sit_port0:1; /* per port schedule interval timer count event */ -+ UINT32 pne_err_port1:1; /* port not enable error */ -+ UINT32 pne_err_port0:1; /* port not enable error */ -+ UINT32 ff_err_port1:1; /* fifo full error */ -+ UINT32 ff_err_port0:1; /* fifo full error */ -+ UINT32 dc_port1:1; /* per port dropped cell */ -+ UINT32 dc_port0:1; /* per port dropped cell */ -+ UINT32 pc_port1:1; /* per port processed cell */ -+ UINT32 pc_port0:1; /* per port processed cell */ -+ }bit; -+ UINT32 reg; -+} ATM_TX_STATUS_REG, *pATM_TX_STATUS_REG; -+ -+ -+typedef union atmTxHdrReg { -+ struct { -+ UINT32 unused1:14; -+ UINT32 aal5SwTrailer:1; /* software trailer enable */ -+ UINT32 schedCrst_1:1; /* scheuler reset */ -+ UINT32 schedCrst_0:1; -+ UINT32 unused:1; -+ UINT32 haltShpt_1:1; /* halt shaper, used for dynamic configuration of shaper */ -+ UINT32 haltShpt_0:1; -+ UINT32 altGFC:4; /* alternate GFC value */ -+ UINT32 altGFCen_1:1; -+ UINT32 altGFCen_0:1; /* alternate GFC mode enable */ -+ UINT32 fRst_1:1; -+ UINT32 fRst_0:1; -+ UINT32 oamCrcEn_1:1; -+ UINT32 oamCrcEn_0:1; -+ UINT32 txEn_1:1; -+ UINT32 txEn_0:1; -+ }bit; -+ UINT32 reg; -+} ATM_TX_HDR_CFG_REG, *pATM_TX_HDR_CFG_REG; -+ -+typedef union rxAalError { -+ struct { -+ UINT8 crc:1; /* aal5 CRC error */ -+ UINT8 cpcsLen0:1; /* aal5 cpcsLen error */ -+ UINT8 length:1; /* aal5 len error */ -+ UINT8 maxSduExceed:1; /* max sdu exceed error */ -+ UINT8 unused:4; -+ }bit; -+ UINT8 entry; -+} RX_AAL_ERROR; -+ -+typedef union rxAtmError { -+ struct { -+ UINT8 pne:1; /* port not enable error */ -+ UINT8 hec:1; /* HEC error */ -+ UINT8 pti:1; /* pti error */ -+ UINT8 idle:1; /* idle rx */ -+ UINT8 camLkup:1; /* cam look up error */ -+ UINT8 unused:1; -+ UINT8 oamCrc:1; /* oam crc */ -+ UINT8 gfc:1; /* gfc error */ -+ }bit; -+ UINT8 entry; -+} RX_ATM_ERROR; -+ -+/* 0xfffe442c */ -+typedef union atmUtopiaCfg { -+ struct { -+ UINT32 unused:26; -+ UINT32 rxLevel2:1; /* when set=level 2, when 0=level 1 */ -+ UINT32 rxEn:1; /* enable RX Utopia Operation */ -+ UINT32 unused1:2; -+ UINT32 txLevel2:1; /* when set=level 2, when 0=level 1 */ -+ UINT32 txEn:1; /* enable TX Utopia Operation */ -+ }bit; -+ UINT32 entry; -+} ATM_UTOPIA_CFG, *pATM_UTOPIA_CFG; -+ -+typedef union portSchedulerCfg { -+ struct { -+ UINT32 cit:16; -+ UINT32 unused:12; -+ UINT32 mode:2; -+ UINT32 arb:1; -+ UINT32 en:1; -+ }bit; -+ UINT32 entry; -+} ATM_PORT_SCHEDULER_CFG, *pATM_PORT_SCHEDULER_CFG; -+ -+/* memory map operation definition */ -+typedef struct atm_regs { -+ int kmem_fd; -+ char *mmap_addr; -+ unsigned long addr; -+ unsigned int size; -+ unsigned int offset; -+} atm_regs; -+ -+int getVccNextIndex(void); -+void removeVccIndex(int index); -+int isVpiVciExisted(UINT32 interface, UINT16 vpi, UINT16 vci); -+void atmDiagInit(void); -+BCMATM_STATUS bcmAtmDiagInit(void); -+BCMATM_STATUS bcmAtmDiagUnInit(void); -+BCMATM_STATUS bcmAtmAddVccCommand(pUT_VCC_ADDR_INFO pVccAddrs, pUT_VCC_CFG pVccCfg, -+ pUT_TRAFFIC_DESCR_PARM_ENTRY pTd); -+BCMATM_STATUS bcmAtmSendVccCommand(pATM_TEST_TX_INFO pAtmInfo); -+BCMATM_STATUS bcmAtmCaptureCommand(int mode); -+BCMATM_STATUS bcmAtmSendManagementCommand(pATM_TEST_TX_INFO pAtmInfo); -+BCMATM_STATUS bcmAtmDeleteVccCommand(pUT_VCC_ADDR_INFO pVccAddrs); -+BCMATM_STATUS bcmAtmSendAllVccsCommand(pATM_TEST_TX_INFO pAtmInfo); -+BCMATM_STATUS bcmAtmSendMultiPriorityCommand(pATM_TEST_TX_INFO pAtmInfo); -+BCMATM_STATUS bcmAtmSendLoopbackCommand(UINT8 mode); -+BCMATM_STATUS bcmAtmAddMPVccCommand(pUT_VCC_ADDR_INFO pVccAddrs, pUT_VCC_CFG pVccCfg, -+ pUT_TRAFFIC_DESCR_PARM_ENTRY pTd); -+BCMATM_STATUS bcmAtmDeleteMPVccCommand(pUT_VCC_ADDR_INFO pVccAddrs); -+BCMATM_STATUS bcmAtmSendMPVccCommand(pATM_TEST_TX_INFO pAtmInfo); -+BCMATM_STATUS bcmAtmSendMultiPriorityCommand(pATM_TEST_TX_INFO pAtmInfo); -+BCMATM_STATUS bcmAtmModifyTDCommand(pUT_TRAFFIC_DESCR_PARM_ENTRY pTD, UINT32 index); -+int bcmAtmGetStatsCommand(int reset); -+int bcmAtmToggleVerifyCommand(void); -+int bcmAtmToggleCaptureCommand(void); -+int bcmAtmToggleDisplayCommand(void); -+int bcmAtmStopTxCommand(void); -+int isVpiVciExisted(UINT32 interface, UINT16 vpi, UINT16 vci); -+int bcmDiag_unmapregs(atm_regs *mapregs); -+atm_regs *bcmDiag_mapregs(unsigned long addr, int size); -+int bcmDiagGetVerificationStats(int vcc,char *pResult); -+void bcmDiagClearSARstats(void); -+void bcmDiagReadSARstats(int parm); -+int bcmDiagGetSARStats(char *pResult); -+#if defined(__cplusplus) -+} -+#endif -+ -+#endif -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/atmosservices.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/atmosservices.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/atmosservices.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/atmosservices.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,98 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+//************************************************************************** -+// File Name : BcmAtmApi.h -+// -+// Description: This file contains the definitions, structures and function -+// prototypes for the Broadcom Asynchronous Transfer Mode (ATM) -+// Application Program Interface (API). -+// -+// Updates : 09/15/2000 lat. Created. -+//************************************************************************** -+ -+#if !defined(_ATMOSSERVICES_H_) -+#define _ATMOSSERVICES_H_ -+ -+#if defined(__cplusplus) -+extern "C" { -+#endif -+ -+//************************************************************************** -+// Constant Definitions -+//************************************************************************** -+#define RTN_SUCCESS 0 -+#define RTN_ERROR 1 -+#define USE_CURRENT_THREAD_PRIORITY 0 -+ -+//************************************************************************** -+// Type Definitions -+//************************************************************************** -+typedef void (*FN_GENERIC) (void *); -+typedef struct AtmOsFuncs -+{ -+ FN_GENERIC pfnAlloc; -+ FN_GENERIC pfnFree; -+ FN_GENERIC pfnDelay; -+ FN_GENERIC pfnCreateSem; -+ FN_GENERIC pfnRequestSem; -+ FN_GENERIC pfnReleaseSem; -+ FN_GENERIC pfnDeleteSem; -+ FN_GENERIC pfnDisableInts; -+ FN_GENERIC pfnEnableInts; -+ FN_GENERIC pfnInvalidateCache; -+ FN_GENERIC pfnFlushCache; -+ FN_GENERIC pfnGetTopMemAddr; -+ FN_GENERIC pfnBlinkLed; -+ FN_GENERIC pfnGetSystemTick; -+ FN_GENERIC pfnStartTimer; -+ FN_GENERIC pfnPrintf; -+} ATM_OS_FUNCS, *PATM_OS_FUNCS; -+ -+//************************************************************************** -+// Function Prototypes -+//************************************************************************** -+ -+UINT32 AtmOsInitialize( PATM_OS_FUNCS pFuncs ); -+char *AtmOsAlloc( UINT32 ulSize ); -+void AtmOsFree( char *pBuf ); -+UINT32 AtmOsCreateThread( char *pszName, void *pFnEntry, UINT32 ulFnParm, -+ UINT32 ulPriority, UINT32 ulStackSize, UINT32 *pulThreadId ); -+UINT32 AtmOsCreateSem( UINT32 ulInitialState ); -+UINT32 AtmOsRequestSem( UINT32 ulSem, UINT32 ulTimeoutMs ); -+void AtmOsReleaseSem( UINT32 ulSem ); -+void AtmOsDeleteSem( UINT32 ulSem ); -+UINT32 AtmOsDisableInts( void ); -+void AtmOsEnableInts( UINT32 ulLevel ); -+void AtmOsDelay( UINT32 ulTimeoutMs ); -+UINT32 AtmOsTickGet( void ); -+UINT32 AtmOsTickCheck( UINT32 ulWaitTime, UINT32 ulMsToWait ); -+void AtmOsInvalidateCache( void *pBuf, UINT32 ulLength ); -+void AtmOsFlushCache( void *pBuf, UINT32 ulLength ); -+char *AtmOsTopMemAddr( void ); -+void AtmOsBlinkLed( void ); -+UINT32 AtmOsInitDeferredHandler( void *pFnEntry, UINT32 ulFnParm, -+ UINT32 ulTimeout ); -+void AtmOsScheduleDeferred( UINT32 ulHandle ); -+void AtmOsUninitDeferredHandler( UINT32 ulHandle ); -+UINT32 AtmOsStartTimer( void *pFnEntry, UINT32 ulFnParm, UINT32 ulTimeout ); -+void AtmOsPrintf( char *, ... ); -+ -+#if defined(__cplusplus) -+} -+#endif -+ -+#endif // _ATMOSSERVICES_H_ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcm_common.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcm_common.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcm_common.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcm_common.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,48 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2004 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+ -+#ifndef __BCM_COMMON_H -+#define __BCM_COMMON_H -+ -+#if defined(CONFIG_BCM96338) -+#include <6338_common.h> -+#endif -+#if defined(CONFIG_BCM96345) -+#include <6345_common.h> -+#endif -+#if defined(CONFIG_BCM96348) -+#include <6348_common.h> -+#endif -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,5) /* starting from 2.4.5 */ -+#define skb_dataref(x) (&skb_shinfo(x)->dataref) -+#else -+#define skb_dataref(x) skb_datarefp(x) -+#endif -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,19) /* starting from 2.4.19 */ -+#define VIRT_TO_PHY(a) (((unsigned long)(a)) & 0x1fffffff) -+#else -+#define VIRT_TO_PHY virt_to_phys -+#endif -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+#define __save_and_cli save_and_cli -+#define __restore_flags restore_flags -+#endif -+ -+#endif -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcm_map.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcm_map.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcm_map.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcm_map.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,31 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2004 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+ -+#ifndef __BCM_MAP_H -+#define __BCM_MAP_H -+ -+#if defined(CONFIG_BCM96338) -+#include <6338_map.h> -+#endif -+#if defined(CONFIG_BCM96345) -+#include <6345_map.h> -+#endif -+#if defined(CONFIG_BCM96348) -+#include <6348_map.h> -+#endif -+ -+#endif -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcmadsl.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcmadsl.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcmadsl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcmadsl.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,199 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+//************************************************************************** -+// File Name : Adsl.h -+// -+// Description: This file contains the definitions, structures and function -+// prototypes for ADSL PHY interface -+// -+//************************************************************************** -+#if !defined(_BCMADSL_H_) -+#define _BCMADSL_H_ -+ -+#if defined(__cplusplus) -+extern "C" { -+#endif -+ -+/* Incldes. */ -+#include "AdslMibDef.h" -+ -+//************************************************************************** -+// Type Definitions -+//************************************************************************** -+ -+// Return status values -+typedef enum BcmAdslStatus -+{ -+ BCMADSL_STATUS_SUCCESS = 0, -+ BCMADSL_STATUS_ERROR -+} BCMADSL_STATUS; -+ -+// Return status values -+typedef enum AdslLinkState -+{ -+ BCM_ADSL_LINK_UP = 0, -+ BCM_ADSL_LINK_DOWN, -+ BCM_ADSL_TRAINING_G992_EXCHANGE, -+ BCM_ADSL_TRAINING_G992_CHANNEL_ANALYSIS, -+ BCM_ADSL_TRAINING_G992_STARTED, -+ BCM_ADSL_TRAINING_G994, -+ BCM_ADSL_G994_NONSTDINFO_RECEIVED, -+ BCM_ADSL_BERT_COMPLETE, -+ BCM_ADSL_ATM_IDLE, -+ BCM_ADSL_EVENT, -+ BCM_ADSL_G997_FRAME_RECEIVED, -+ BCM_ADSL_G997_FRAME_SENT -+} ADSL_LINK_STATE; -+ -+#ifndef DISABLE_ADSL_OLD_DEF -+#define ADSL_LINK_UP BCM_ADSL_LINK_UP -+#define ADSL_LINK_DOWN BCM_ADSL_LINK_DOWN -+#endif -+ -+/* ADSL test modes */ -+typedef enum AdslTestMode -+{ -+ ADSL_TEST_NORMAL = 0, -+ ADSL_TEST_REVERB, -+ ADSL_TEST_MEDLEY, -+ ADSL_TEST_SELECT_TONES, -+ ADSL_TEST_NO_AUTO_RETRAIN, -+ ADSL_TEST_MARGIN_TWEAK, -+ ADSL_TEST_ESTIMATE_PLL_PHASE, -+ ADSL_TEST_REPORT_PLL_PHASE_STATUS, -+ ADSL_TEST_AFELOOPBACK, -+ ADSL_TEST_L3, -+ ADSL_TEST_DIAGMODE, -+ ADSL_TEST_L0 -+} ADSL_TEST_MODE; -+ -+// ADSL_CHANNEL_ADDR Contains ADSL Utopia PHY addresses -+typedef struct AdslChannelAddr -+{ -+ UINT16 usFastChannelAddr; -+ UINT16 usInterleavedChannelAddr; -+} ADSL_CHANNEL_ADDR, *PADSL_CHANNEL_ADDR; -+ -+// ADSL_CONNECTION_INFO Contains ADSL Connection Info -+typedef struct AdslConnectionInfo -+{ -+ ADSL_LINK_STATE LinkState; -+ UINT32 ulFastUpStreamRate; -+ UINT32 ulFastDnStreamRate; -+ UINT32 ulInterleavedUpStreamRate; -+ UINT32 ulInterleavedDnStreamRate; -+} ADSL_CONNECTION_INFO, *PADSL_CONNECTION_INFO; -+ -+/* OEM parameter definition */ -+#define ADSL_OEM_G994_VENDOR_ID 1 /* Vendor ID used during G.994 handshake */ -+#define ADSL_OEM_G994_XMT_NS_INFO 2 /* G.994 non-standard info field to send */ -+#define ADSL_OEM_G994_RCV_NS_INFO 3 /* G.994 received non-standard */ -+#define ADSL_OEM_EOC_VENDOR_ID 4 /* EOC reg. 0 */ -+#define ADSL_OEM_EOC_VERSION 5 /* EOC reg. 1 */ -+#define ADSL_OEM_EOC_SERIAL_NUMBER 6 /* EOC reg. 2 */ -+#define ADSL_OEM_T1413_VENDOR_ID 7 /* Vendor ID used during T1.413 handshake */ -+#define ADSL_OEM_T1413_EOC_VENDOR_ID 8 /* EOC reg. 0 (vendor ID) in T1.413 mode */ -+ -+/* XMT gain definitions */ -+#define ADSL_XMT_GAIN_AUTO 0x80000000 -+ -+typedef struct -+{ -+ int diagCmd; -+ int diagMap; -+ int logTime; -+ int srvIpAddr; -+ int gwIpAddr; -+} ADSL_DIAG, *PADSL_DIAG; -+ -+typedef struct -+{ -+ short x; -+ short y; -+} ADSL_CONSTELLATION_POINT, *PADSL_CONSTELLATION_POINT; -+ -+#define ADSL_CONSTEL_DATA_ID 0 -+#define ADSL_CONSTEL_PILOT_ID 1 -+ -+#define ADSL_MIB_INFO adslMibInfo -+typedef ADSL_MIB_INFO *PADSL_MIB_INFO; -+ -+typedef void (*ADSL_FN_NOTIFY_CB) (ADSL_LINK_STATE AdslLinkState, UINT32 ulParm); -+ -+//************************************************************************** -+// Function Prototypes -+//************************************************************************** -+ -+BCMADSL_STATUS BcmAdsl_Check(void); -+BCMADSL_STATUS BcmAdsl_Initialize(ADSL_FN_NOTIFY_CB pFnNotifyCb, UINT32 ulParm, adslCfgProfile *pAdslCfg); -+#ifdef LINUX -+BCMADSL_STATUS BcmAdsl_MapAtmPortIDs(UINT16 usAtmFastPortId, UINT16 usAtmInterleavedPortId); -+#endif -+BCMADSL_STATUS BcmAdsl_Uninitialize(void); -+BCMADSL_STATUS BcmAdsl_ConnectionStart(void); -+BCMADSL_STATUS BcmAdsl_ConnectionStop(void); -+BCMADSL_STATUS BcmAdsl_GetPhyAddresses(PADSL_CHANNEL_ADDR pChannelAddr); -+BCMADSL_STATUS BcmAdsl_SetPhyAddresses(PADSL_CHANNEL_ADDR pChannelAddr); -+BCMADSL_STATUS BcmAdsl_GetConnectionInfo(PADSL_CONNECTION_INFO pConnectionInfo); -+BCMADSL_STATUS BcmAdsl_DiagCommand(PADSL_DIAG pAdslDiag); -+int BcmAdsl_GetObjectValue(char *objId, int objIdLen, char *dataBuf, long *dataBufLen); -+BCMADSL_STATUS BcmAdsl_StartBERT(unsigned long totalBits); -+BCMADSL_STATUS BcmAdsl_StopBERT(void); -+BCMADSL_STATUS BcmAdsl_BertStartEx(unsigned long bertSec); -+BCMADSL_STATUS BcmAdsl_BertStopEx(void); -+BCMADSL_STATUS BcmAdsl_CheckPowerLoss(void); -+BCMADSL_STATUS BcmAdsl_SendDyingGasp(int powerCtl); -+BCMADSL_STATUS BcmAdsl_Configure(adslCfgProfile *pAdslCfg); -+BCMADSL_STATUS BcmAdsl_GetVersion(adslVersionInfo *pAdslVer); -+BCMADSL_STATUS BcmAdsl_SetSDRAMBaseAddr(void *pAddr); -+BCMADSL_STATUS BcmAdsl_SetVcEntry (int gfc, int port, int vpi, int vci); -+BCMADSL_STATUS BcmAdsl_SetVcEntryEx (int gfc, int port, int vpi, int vci, int pti_clp); -+ -+BCMADSL_STATUS BcmAdsl_ResetStatCounters(void); -+BCMADSL_STATUS BcmAdsl_SetAtmLoopbackMode(void); -+BCMADSL_STATUS BcmAdsl_SetTestMode(ADSL_TEST_MODE testMode); -+BCMADSL_STATUS BcmAdsl_SelectTones( -+ int xmtStartTone, -+ int xmtNumTones, -+ int rcvStartTone, -+ int rcvNumTones, -+ char *xmtToneMap, -+ char *rcvToneMap -+ ); -+BCMADSL_STATUS BcmAdsl_SetDiagMode(int diagMode); -+ -+int BcmAdsl_GetConstellationPoints (int toneId, ADSL_CONSTELLATION_POINT *pointBuf, int numPoints); -+ -+int BcmAdsl_GetOemParameter (int paramId, void *buf, int len); -+int BcmAdsl_SetOemParameter (int paramId, void *buf, int len); -+int BcmAdsl_SetXmtGain(int gain); -+ -+UINT32 BcmAdsl_GetSelfTestMode(void); -+void BcmAdsl_SetSelfTestMode(UINT32 stMode); -+UINT32 BcmAdsl_GetSelfTestResults(void); -+ -+BCMADSL_STATUS BcmAdsl_G997SendData(void *buf, int len); -+void *BcmAdsl_G997FrameGet(int *pLen); -+void *BcmAdsl_G997FrameGetNext(int *pLen); -+void BcmAdsl_G997FrameFinished(void); -+void BcmAdsl_DyingGaspHandler(void *context); -+ -+#if defined(__cplusplus) -+} -+#endif -+ -+#endif // _BCMADSL_H_ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcmatmapi.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcmatmapi.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcmatmapi.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcmatmapi.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,699 @@ -+/* -+<:copyright-broadcom -+ -+ Copyright (c) 2002 Broadcom Corporation -+ All Rights Reserved -+ No portions of this material may be reproduced in any form without the -+ written permission of: -+ Broadcom Corporation -+ 16215 Alton Parkway -+ Irvine, California 92619 -+ All information contained in this document is Broadcom Corporation -+ company private, proprietary, and trade secret. -+ -+:> -+*/ -+//************************************************************************** -+// File Name : BcmAtmApi.h -+// -+// Description: This file contains the definitions, structures and function -+// prototypes for the Broadcom Asynchronous Transfer Mode (ATM) -+// Application Program Interface (API). -+// -+// Updates : 09/15/2000 lat. Created. -+//************************************************************************** -+ -+#if !defined(_BCMATMAPI_H_) -+#define _BCMATMAPI_H_ -+ -+#if defined(__cplusplus) -+extern "C" { -+#endif -+ -+//************************************************************************** -+// Constant Definitions -+//************************************************************************** -+ -+// ATM physical port constants. -+#define PHY_NUM_PORTS 4 -+#define PHY_0 0 -+#define PHY_1 1 -+#define PHY_2 2 // [BCM635x Only] -+#define PHY_3 3 // [BCM635x Only] -+ -+// Used for backwards compatibility. -+#define PHY_UTOPIA0 0 -+#define PHY_UTOPIA1 1 -+#define PHY_UTOPIA2 2 -+#define PHY_UTOPIA3_TC_LOOPBACK 3 -+ -+// Values for ATM_PORT_CFG ucPortType. -+#define PT_DISABLED 0 -+#define PT_UTOPIA 1 -+#define PT_LOOPBACK 2 -+#define PT_TC 3 // [BCM635x Only] -+#define PT_ADSL_INTERLEAVED 4 // [BCM6345 Only] -+#define PT_ADSL_FAST 5 // [BCM6345 Only] -+ -+// Wildcard definitions. -+#define ALL_INTERFACES 0xffffffff -+#define ANY_PRIORITY 0xff -+ -+// Values for ATM_TRAFFIC_DESCR_PARM_ENTRY ulTrafficDescrType. -+#define TDT_ATM_NO_TRAFFIC_DESCRIPTOR 1 -+#define TDT_ATM_NO_CLP_NO_SCR 2 -+#define TDT_ATM_CLP_NO_TAGGING_NO_SCR 3 -+#define TDT_ATM_CLP_TAGGING_NO_SCR 4 -+#define TDT_ATM_NO_CLP_SCR 5 -+#define TDT_ATM_CLP_NO_TAGGING_SCR 6 // [BCM635x Only] -+#define TDT_ATM_CLP_TAGGING_SCR 7 // [BCM635x Only] -+#define TDT_ATM_CLP_NO_TAGGING_MCR 8 // [BCM6348 Only] -+#define TDT_ATM_CLP_TRANSPARENT_NO_SCR 9 -+#define TDT_ATM_CLP_TRANSPARENT_SCR 10 -+#define TDT_ATM_NO_CLP_TAGGING_NO_SCR 11 -+#define TDT_ATM_NO_CLP_NO_SCR_CDVT 12 -+#define TDT_ATM_NO_CLP_SCR_CDVT 13 -+#define TDT_ATM_CLP_NO_TAGGING_SCR_CDVT 14 // [BCM635x Only] -+#define TDT_ATM_CLP_TAGGING_SCR_CDVT 15 // [BCM635x Only] -+ -+// Values for ATM_TRAFFIC_DESCR_PARM_ENTRY ulTrafficDescrRowStatus. -+#define TDRS_ACTIVE 1 -+#define TDRS_NOT_IN_SERVICE 2 -+ -+// Values for ATM_TRAFFIC_DESCR_PARM_ENTRY ulServiceCategory. -+#define SC_OTHER 1 -+#define SC_CBR 2 -+#define SC_RT_VBR 3 -+#define SC_NRT_VBR 4 -+#define SC_UBR 6 -+ -+// Values for ATM_INTERFACE_CFG ulIfAdminStatus and ATM_VCC_CFG -+// ulAtmVclAdminStatus. -+#define ADMSTS_UP 1 -+#define ADMSTS_DOWN 2 -+#define ADMSTS_TESTING 3 -+ -+// Values for ATM_INTERFACE_CFG ulIfOperStatus and ATM_VCC_CFG -+// ulAtmVclOperStatus. -+#define OPRSTS_UP 1 -+#define OPRSTS_DOWN 2 -+#define OPRSTS_UNKNOWN 3 -+ -+// Values for ATM_INTERFACE_LINK_INFO ulLinkState. -+#define LINK_UP 1 -+#define LINK_DOWN 2 -+ -+// Values for ulAalType. -+#define AAL_2 0 // [BCM635x Only] -+#define AAL_TRANSPARENT 1 -+#define AAL_0_PACKET 2 -+#define AAL_0_CELL_CRC 3 -+#define AAL_5 7 -+ -+// Values for ATM_VCC_CFG ulAtmVccEncapsType. -+#define ET_VC_MULTIPLEX_ROUTED_PROTOCOL 1 -+#define ET_VC_MULTIPLEX_BRG_PROTOCOL_8023 2 -+#define ET_VC_MULTIPLEX_BRG_PROTOCOL_8025 3 -+#define ET_VC_MULTIPLEX_BRG_PROTOCOL_8026 4 -+#define ET_VC_MULTIPLEX_LAN_EMULATION_8023 5 -+#define ET_VC_MULTIPLEX_LAN_EMULATION_8025 6 -+#define ET_LLC_ENCAPSULATION 7 -+#define ET_MULTI_PROTOCOL_FRAME_RELAY_SSCS 8 -+#define ET_OTHER 9 -+#define ET_UNKNOWN 10 -+ -+// [BCM635x Only] Values for ATM_AAL2_VCC_CFG ucAal2CpsOptimisation. -+#define OPT_SNG_PKT_PER_PDU_NO_OVERLAP 1 -+#define OPT_MULT_PKTS_PER_PDU_OVERLAP 2 -+ -+// [BCM635x Only] Values for ATM_INTERFACE_STATS ulTcAlarmState. -+#define TCALM_NO_ALARM 1 -+#define TCALM_LCD_FAILURE 2 -+ -+// Values for ATM_NOTIFY_PARMS ulNotificationType. -+#define ATM_NOTIFY_INTERFACE_CHANGE 1 -+ -+// Values for AN_INTF_CHANGE_PARMS ulInterfaceState. -+#define ATM_INTERFACE_UP 1 -+#define ATM_INTERFACE_DOWN 2 -+ -+// Values for AN_VCC_CHANGE_PARMS ulInterfaceState. -+#define ATM_VCC_UP 1 -+#define ATM_VCC_DOWN 2 -+ -+// Values for ATM_VCC_ATTACH_PARMS ulFlags. -+#define AVAP_ALLOW_OAM_F5_SEGMENT_CELLS 0x0001 -+#define AVAP_ALLOW_OAM_F5_END_TO_END_CELLS 0x0002 -+#define AVAP_ALLOW_RM_CELLS 0x0004 -+#define AVAP_ALLOW_OAM_F4_SEGMENT_CELLS 0x0008 -+#define AVAP_ALLOW_OAM_F4_END_TO_END_CELLS 0x0010 -+#define AVAP_ALLOW_CELLS_WITH_ERRORS 0x0020 -+#define AVAP_ADD_AAL0_CRC10 0x0040 -+#define AVAP_DSP 0x8000 // [BCM635x Only] -+ -+// [BCM635x Only] Values for ATM_VCC_AAL2_CHANNEL_ID_PARMS ucVoiceRouting. -+#define VOICE_ROUTE_MIPS 0 -+#define VOICE_ROUTE_DSP 2 -+ -+// [BCM635x Only] Values for ATM_VCC_AAL2_CHANNEL_ID_PARMS ucFlags. -+#define CID_USE_FRAME_MODE 0x01 -+ -+// Values for ATM_VCC_DATA_PARMS ucCircuitType. -+#define CT_AAL0_PACKET 0x02 -+#define CT_AAL0_CELL_CRC 0x03 -+#define CT_OAM_F5_SEGMENT 0x04 -+#define CT_OAM_F5_END_TO_END 0x05 -+#define CT_RM 0x06 -+#define CT_AAL5 0x07 -+#define CT_HDLC_PACKET 0x08 // [BCM6348 Only] -+#define CT_ANY_AAL2_MASK 0x08 // [BCM635x Only] -+#define CT_AAL2_ALARM 0x08 // [BCM635x Only] -+#define CT_AAL2_TYPE_3 0x09 // [BCM635x Only] -+#define CT_AAL2_TYPE_1 0x0A // [BCM635x Only] -+#define CT_AAL2_FRAME 0x0B // [BCM635x Only] -+#define CT_TRANSPARENT 0x10 -+#define CT_OAM_F4_ANY 0x20 -+ -+// OAM F4 VCI values. -+#define VCI_OAM_F4_SEGMENT 3 -+#define VCI_OAM_F4_END_TO_END 4 -+#define VCI_RM 6 -+ -+// Values for ATM_VCC_DATA_PARMS ucFlags. -+#define ATMDATA_CI 0x04 -+#define ATMDATA_CLP 0x08 -+ -+// [BCM635x Only] DSP specific values. -+#define DSP_VCID 31 -+ -+// ATM cell layer interface name -+#define ATM_CELL_LAYER_IFNAME "atm0" -+ -+// AAL5 CPCS layer interface name -+#define AAL5_CPCS_LAYER_IFNAME "cpcs0" -+ -+//************************************************************************** -+// Type Definitions -+//************************************************************************** -+ -+// Return status values -+typedef enum BcmAtmStatus -+{ -+ STS_SUCCESS = 0, -+ STS_ERROR, -+ STS_STATE_ERROR, -+ STS_PARAMETER_ERROR, -+ STS_ALLOC_ERROR, -+ STS_RESOURCE_ERROR, -+ STS_IN_USE, -+ STS_VCC_DOWN, -+ STS_INTERFACE_DOWN, -+ STS_LINK_DOWN, -+ STS_NOT_FOUND, -+ STS_NOT_SUPPORTED, -+ STS_VCAM_MULT_MATCH_ERROR, -+ STS_CCAM_MULT_MATCH_ERROR, -+ STS_PKTERR_INVALID_VPI_VCI, -+ STS_PKTERR_PORT_NOT_ENABLED, -+ STS_PKTERR_HEC_ERROR, -+ STS_PKTERR_PTI_ERROR, -+ STS_PKTERR_RECEIVED_IDLE_CELL, -+ STS_PKTERR_CIRCUIT_TYPE_ERROR, -+ STS_PKTERR_OAM_RM_CRC_ERROR, -+ STS_PKTERR_GFC_ERROR, -+ STS_PKTERR_AAL5_AAL0_CRC_ERROR, -+ STS_PKTERR_AAL5_AAL0_SHORT_PKT_ERROR, -+ STS_PKTERR_AAL5_AAL0_LENGTH_ERROR, -+ STS_PKTERR_AAL5_AAL0_BIG_PKT_ERROR, -+ STS_PKTERR_AAL5_AAL0_SAR_TIMEOUT_ERROR, -+ STS_PKTERR_AAL2F_HEC_ERROR, -+ STS_PKTERR_AAL2F_SEQ_NUM_ERROR, -+ STS_PKTERR_AAL2F_PARITY_ERROR, -+ STS_PKTERR_AAL2F_CRC_ERROR, -+ STS_PKTERR_AAL2F_CAM_ERROR, -+ STS_PKTERR_AAL2F_BIG_PKT_ERROR, -+ STS_PKTERR_AAL2F_RAS_TIMEOUT_ERROR, -+ STS_PKTERR_AAL2F_SHORT_PKT_ERROR, -+ STS_PKTERR_AAL2F_LENGTH_MISMATCH_ERROR, -+ STS_PKTERR_AAL2V_HEC_ERROR, -+ STS_PKTERR_AAL2V_SEQ_NUM_ERROR, -+ STS_PKTERR_AAL2V_PARITY_ERROR, -+ STS_PKTERR_AAL2V_CRC_ERROR, -+ STS_PKTERR_AAL2V_CAM_ERROR, -+ STS_PKTERR_AAL2V_OSF_MISMATCH_ERROR, -+ STS_PKTERR_AAL2V_OSF_ERROR, -+ STS_PKTERR_AAL2V_HEC_OVERLAP_ERROR, -+ STS_PKTERR_AAL2V_BIG_PKT_ERROR, -+ STS_PKTERR_AAL2V_RAS_ERROR, -+ STS_PKTERR_AAL2V_UUI_ERROR -+} BCMATM_STATUS; -+ -+ -+// ATM_VCC_ADDR identifies a Virtual Channel Connection (VCC). -+typedef struct AtmVccAddr -+{ -+ UINT32 ulInterfaceId; -+ UINT16 usVpi; -+ UINT16 usVci; -+} ATM_VCC_ADDR, *PATM_VCC_ADDR; -+ -+ -+// ATM_PORT_CFG contains ATM physical port configuration parameters. -+typedef struct AtmPortCfg -+{ -+ UINT32 ulInterfaceId; -+ UINT8 ucPortType; -+ UINT8 ucPortAddr; -+ UINT8 ucReserved[2]; -+} ATM_PORT_CFG, *PATM_PORT_CFG; -+ -+ -+// ATM_INITIALIZATION_PARMS contains ATM API module initialization parameters. -+#define ID_ATM_INITIALIZATION_PARMS 2 -+typedef struct AtmInitialization -+{ -+ UINT32 ulStructureId; -+ UINT32 ulThreadPriority; -+ UINT16 usFreeCellQSize; -+ UINT16 usFreePktQSize; -+ UINT16 usFreePktQBufferSize; -+ UINT16 usFreePktQBufferOffset; // offset into buffer to start receiving data -+ UINT16 usReceiveCellQSize; -+ UINT16 usReceivePktQSize; -+ UINT8 ucTransmitFifoPriority; // [BCM635x Only] -+ UINT8 ucReserved; -+ UINT16 usAal5CpcsMaxSduLength; -+ UINT16 usAal2SscsMaxSsarSduLength; // [BCM635x Only] -+ ATM_PORT_CFG PortCfg[PHY_NUM_PORTS]; -+} ATM_INITIALIZATION_PARMS, *PATM_INITIALIZATION_PARMS; -+ -+ -+// ATM_TRAFFIC_DESCR_PARM_ENTRY contains the fields needed to create a Traffic -+// Descriptor Table parameter entry. -+#define ID_ATM_TRAFFIC_DESCR_PARM_ENTRY 1 -+typedef struct AtmTrafficDescrParmEntry -+{ -+ UINT32 ulStructureId; -+ UINT32 ulTrafficDescrIndex; -+ UINT32 ulTrafficDescrType; -+ UINT32 ulTrafficDescrParm1; -+ UINT32 ulTrafficDescrParm2; -+ UINT32 ulTrafficDescrParm3; -+ UINT32 ulTrafficDescrParm4; -+ UINT32 ulTrafficDescrParm5; -+ UINT32 ulTrafficDescrRowStatus; -+ UINT32 ulServiceCategory; -+ UINT32 ulTrafficFrameDiscard; -+} ATM_TRAFFIC_DESCR_PARM_ENTRY, *PATM_TRAFFIC_DESCR_PARM_ENTRY; -+ -+ -+// ATM_INTERFACE_CFG contains configuration fields for an ATM interface. -+#define ID_ATM_INTERFACE_CFG 3 -+typedef struct AtmInterfaceCfg -+{ -+ UINT32 ulStructureId; -+ UINT32 ulAtmInterfaceMaxVccs; -+ UINT32 ulAtmInterfaceConfVccs; -+ UINT32 ulAtmInterfaceMaxActiveVpiBits; -+ UINT32 ulAtmInterfaceMaxActiveVciBits; -+ UINT32 ulAtmInterfaceCurrentMaxVpiBits; -+ UINT32 ulAtmInterfaceCurrentMaxVciBits; -+ UINT32 ulIfAdminStatus; -+ UINT32 ulIfOperStatus; // read-only -+ UINT32 ulSendNullCells; -+ UINT32 ulTcScramble; -+ UINT32 ulPortType; // read-only -+ UINT32 ulIfLastChange; -+} ATM_INTERFACE_CFG, *PATM_INTERFACE_CFG; -+ -+ -+// ATM_VCC_TRANSMIT_QUEUE_PARMS contains fields for configuring an transmit -+// queue. -+#define ID_ATM_VCC_TRANSMIT_QUEUE_PARMS 1 -+typedef struct AtmVccTransmitQueueParms -+{ -+ UINT32 ulStructureId; -+ UINT32 ulSize; -+ UINT32 ulPriority; -+ UINT32 ulReserved; -+} ATM_VCC_TRANSMIT_QUEUE_PARMS, *PATM_VCC_TRANSMIT_QUEUE_PARMS; -+ -+ -+// ATM_AAL5_VCC_CFG contains configuration fields for an ATM AAL5 Virtual -+// Channel Connection (VCC). -+typedef struct AtmAal5VccCfg -+{ -+ UINT32 ulAtmVccEncapsType; -+ UINT32 ulAtmVccCpcsAcceptCorruptedPdus; -+} ATM_AAL5_VCC_CFG, *PATM_AAL5_VCC_CFG; -+ -+ -+// [BCM635x Only] ATM_AAL2_VCC_CFG contains configuration fields for an ATM -+// AAL2 Virtual Channel Connection (VCC). -+typedef struct AtmAal2VccCfg -+{ -+ UINT8 ucAal2CpsMaxMultiplexedChannels; -+ UINT8 ucAal2CpsMaxSduLength; -+ UINT8 ucAal2CpsCidLowerLimit; -+ UINT8 ucAal2CpsCidUpperLimit; -+ UINT8 ucAal2CpsOptimisation; -+ UINT8 ucReserved[3]; -+} ATM_AAL2_VCC_CFG, *PATM_AAL2_VCC_CFG; -+ -+ -+// ATM_AAL0_VCC_CFG contains configuration fields for an ATM AAL0 Virtual -+// Channel Connection (VCC). -+typedef struct AtmAal0VccCfg -+{ -+ UINT8 ucReserved; -+ // Reserved for future use. -+} ATM_AAL0_VCC_CFG, *PATM_AAL0_VCC_CFG; -+ -+ -+// ATM_VCC_CFG contains configuration fields for an ATM Virtual Channel -+// Connection (VCC). -+#define ID_ATM_VCC_CFG 2 -+#define TX_Q_PARM_SIZE 8 -+typedef struct AtmVccCfg -+{ -+ UINT32 ulStructureId; -+ UINT32 ulAalType; -+ UINT32 ulAtmVclAdminStatus; -+ UINT32 ulAtmVclOperStatus; -+ UINT32 ulAtmVclLastChange; -+ UINT32 ulAtmVclReceiveTrafficDescrIndex; -+ UINT32 ulAtmVclTransmitTrafficDescrIndex; -+ UINT32 ulTransmitQParmsSize; -+ ATM_VCC_TRANSMIT_QUEUE_PARMS TransmitQParms[TX_Q_PARM_SIZE]; -+ union -+ { -+ ATM_AAL5_VCC_CFG Aal5Cfg; -+ ATM_AAL2_VCC_CFG Aal2Cfg; // [BCM635x Only] -+ ATM_AAL0_VCC_CFG Aal0Cfg; -+ } u; -+} ATM_VCC_CFG, *PATM_VCC_CFG; -+ -+ -+// ATM_INTF_ATM_STATS contains statistics for the ATM layer of an interface. -+typedef struct AtmIntfAtmStats -+{ -+ UINT32 ulIfInOctets; -+ UINT32 ulIfOutOctets; -+ UINT32 ulIfInErrors; -+ UINT32 ulIfInUnknownProtos; -+ UINT32 ulIfOutErrors; -+ -+ // The following fields are added together to calculate ulIfInErrors. -+ UINT32 ulIfInHecErrors; -+ -+ // The following fields are added together to calculate ulIfInUnknownProtos. -+ UINT32 ulIfInInvalidVpiVciErrors; -+ UINT32 ulIfInPortNotEnabledErrors; -+ UINT32 ulIfInPtiErrors; -+ UINT32 ulIfInIdleCells; -+ UINT32 ulIfInCircuitTypeErrors; -+ UINT32 ulIfInOamRmCrcErrors; -+ UINT32 ulIfInGfcErrors; -+} ATM_INTF_ATM_STATS, *PATM_INTF_ATM_STATS; -+ -+ -+// [BCM635x Only] ATM_INTF_ATM_STATS contains statistics for the TC layer. -+typedef struct AtmIntfTcStats -+{ -+ UINT32 ulTcInDataCells; -+ UINT32 ulTcInTotalCells; -+ UINT32 ulTcInHecErrors; -+ UINT32 ulTcInOcdEvents; -+ UINT32 ulTcAlarmState; -+} ATM_INTF_TC_STATS, *PATM_INTF_TC_STATS; -+ -+ -+// ATM_INTF_AAL5_AAL0_STATS contains statistics for all AAL5/AAL0 VCCs on an -+// ATM interface. -+typedef struct AtmIntfAal5Aal0Stats -+{ -+ UINT32 ulIfInOctets; -+ UINT32 ulIfOutOctets; -+ UINT32 ulIfInUcastPkts; -+ UINT32 ulIfOutUcastPkts; -+ UINT32 ulIfInErrors; -+ UINT32 ulIfOutErrors; -+ UINT32 ulIfInDiscards; -+ UINT32 ulIfOutDiscards; -+} ATM_INTF_AAL5_AAL0_STATS, *PATM_INTF_AAL5_AAL0_STATS; -+ -+ -+// [BCM635x Only] ATM_INTF_AAL2_STATS contains statistics for all AAL2 VCCs -+// on an ATM interface. -+typedef struct AtmIntfAal2Stats -+{ -+ UINT32 ulIfInOctets; -+ UINT32 ulIfOutOctets; -+ UINT32 ulIfInUcastPkts; -+ UINT32 ulIfOutUcastPkts; -+ UINT32 ulIfInErrors; -+ UINT32 ulIfOutErrors; -+ UINT32 ulIfInDiscards; -+ UINT32 ulIfOutDiscards; -+} ATM_INTF_AAL2_STATS, *PATM_INTF_AAL2_STATS; -+ -+ -+// ATM_INTERFACE_STATS contains statistics for an ATM interface. -+#define ID_ATM_INTERFACE_STATS 1 -+typedef struct AtmInterfaceStats -+{ -+ UINT32 ulStructureId; -+ ATM_INTF_ATM_STATS AtmIntfStats; -+ ATM_INTF_TC_STATS TcIntfStats; // [BCM635x Only] -+ ATM_INTF_AAL5_AAL0_STATS Aal5IntfStats; -+ ATM_INTF_AAL2_STATS Aal2IntfStats; // [BCM635x Only] -+ ATM_INTF_AAL5_AAL0_STATS Aal0IntfStats; -+} ATM_INTERFACE_STATS, *PATM_INTERFACE_STATS; -+ -+ -+// ATM_VCC_AAL5_STATS contains statistics for an AAL5 VCC. -+typedef struct AtmVccAal5Stats -+{ -+ UINT32 ulAal5VccCrcErrors; -+ UINT32 ulAal5VccSarTimeOuts; -+ UINT32 ulAal5VccOverSizedSdus; -+ UINT32 ulAal5VccShortPacketErrors; -+ UINT32 ulAal5VccLengthErrors; -+} ATM_VCC_AAL5_STATS, *PATM_VCC_AAL5_STATS; -+ -+ -+// [BCM635x Only] ATM_VCC_AAL2_STATS contains statistics for an AAL2 VCC. -+typedef struct AtmVccAal2Stats -+{ -+ UINT32 ulAal2CpsInPkts; -+ UINT32 ulAal2CpsOutPkts; -+ UINT32 ulAal2CpsParityErrors; -+ UINT32 ulAal2CpsSeqNumErrors; -+ UINT32 ulAal2CpsOsfMismatchErrors; -+ UINT32 ulAal2CpsOsfErrors; -+ UINT32 ulAal2CpsHecOverlapErrors; -+ UINT32 ulAal2CpsHecErrors; -+ UINT32 ulAal2CpsOversizedSduErrors; -+ UINT32 ulAal2CpsReassemblyErrors; -+ UINT32 ulAal2CpsUuiErrors; -+ UINT32 ulAal2CpsCidErrors; -+ UINT32 ulAal2SscsOversizedSssarSduErrors; -+ UINT32 ulAal2SscsSssarRasTimerExipiryErrors; -+ UINT32 ulAal2SscsUndersizedSstedPduErrors; -+ UINT32 ulAal2SscsSstedPduLengthMismatchErrors; -+ UINT32 ulAal2SscsSstedCrcMismatchErrors; -+} ATM_VCC_AAL2_STATS, *PATM_VCC_AAL2_STATS; -+ -+ -+// ATM_VCC_AAL0PKT_STATS contains statistics for an AAL0 Packet VCC. -+typedef struct AtmVccAal0PktStats -+{ -+ UINT32 ulAal0VccSarTimeOuts; -+ UINT32 ulAal0VccOverSizedSdus; -+} ATM_VCC_AAL0PKT_STATS, *PATM_VCC_AAL0PKT_STATS; -+ -+ -+// ATM_VCC_AAL0CELL_STATS contains statistics for an AAL0 Cell with CRC VCC. -+typedef struct AtmVccAal0CellStats -+{ -+ UINT32 ulAal0VccCrcErrors; -+} ATM_VCC_AAL0CELL_STATS, *PATM_VCC_AAL0CELL_STATS; -+ -+ -+// ATM_VCC_STATS contains statistics for a VCC. -+#define ID_ATM_VCC_STATS 1 -+typedef struct AtmVccStatistics -+{ -+ UINT32 ulStructureId; -+ UINT32 ulAalType; -+ union -+ { -+ ATM_VCC_AAL5_STATS AtmVccAal5Stats; -+ ATM_VCC_AAL2_STATS AtmVccAal2Stats; // [BCM635x Only] -+ ATM_VCC_AAL0PKT_STATS AtmVccAal0PktStats; -+ ATM_VCC_AAL0CELL_STATS AtmVccAal0CellStats; -+ } u; -+} ATM_VCC_STATS, *PATM_VCC_STATS; -+ -+ -+// ATM_INTERFACE_LINK_INFO contains fields for the physical link that the -+// ATM interface is using. -+#define ID_ATM_INTERFACE_LINK_INFO 1 -+typedef struct AtmInterfaceLinkInfo -+{ -+ UINT32 ulStructureId; -+ UINT32 ulLinkState; -+ UINT32 ulLineRate; -+ UINT32 ulReserved[2]; -+} ATM_INTERFACE_LINK_INFO, *PATM_INTERFACE_LINK_INFO; -+ -+ -+// AN_INTF_CHANGE_PARMS contains notification fields that passed to an -+// application callback function when the ATM interface goes up or down. -+#define ID_AN_INTF_CHANGE_PARMS 1 -+typedef struct AnIntfChangeParms -+{ -+ UINT32 ulInterfaceId; -+ UINT32 ulInterfaceState; -+ UINT32 ulInterfaceLineRate; -+} AN_INTF_CHANGE_PARMS, *PAN_INTF_CHANGE_PARMS; -+ -+ -+// ATM_NOTIFY_PARMS contains notification fields that passed to an application -+// callback function when an ATM notification event occurs. -+typedef struct AtmNotifyParms -+{ -+ UINT32 ulNotifyType; -+ union -+ { -+ AN_INTF_CHANGE_PARMS IntfChangeParms; -+ -+ // Other fields and structures that are specific -+ // to the type of notification are declared here. -+ } u; -+} ATM_NOTIFY_PARMS, *PATM_NOTIFY_PARMS; -+ -+typedef void (*FN_NOTIFY_CB) (PATM_NOTIFY_PARMS pNotifyParms); -+ -+ -+// ATM_VCC_ATTACH_PARMS contains fields for attaching to a VCC. It is used -+// by all BcmAtm_Attach... functions. -+struct AtmVccDataParms; -+typedef void (*FN_RECEIVE_CB) (UINT32 ulHandle, PATM_VCC_ADDR pVccAddr, -+ struct AtmVccDataParms *pDataParms, UINT32 ulParmReceiveData); -+ -+#define ID_ATM_VCC_ATTACH_PARMS 1 -+typedef struct AtmAttachParms -+{ -+ UINT32 ulStructureId; -+ UINT32 ulFlags; -+ FN_RECEIVE_CB pFnReceiveDataCb; -+ UINT32 ulParmReceiveData; -+ ATM_VCC_TRANSMIT_QUEUE_PARMS *pTransmitQParms; -+ UINT32 ulTransmitQParmsSize; -+ UINT32 ulHandle; -+ UINT32 ulReserved; -+} ATM_VCC_ATTACH_PARMS, *PATM_VCC_ATTACH_PARMS; -+ -+ -+// [BCM635x Only] ATM_VCC_AAL2_CHANNEL_ID_PARMS contains fields for -+// configuring an transmit queue. -+#define ID_ATM_VCC_AAL2_CHANNEL_ID_PARMS 1 -+typedef struct AtmVccAal2ChannelIdParms -+{ -+ UINT32 ulStructureId; -+ UINT8 ucChannelId; -+ UINT8 ucVoiceRouting; -+ UINT8 ucFlags; -+ UINT8 ucReserved[5]; -+} ATM_VCC_AAL2_CHANNEL_ID_PARMS, *PATM_VCC_AAL2_CHANNEL_ID_PARMS; -+ -+ -+// ATM_BUFFER contains fields for passing data to, and receive data from, the -+// ATM API. -+typedef struct AtmBuffer -+{ -+ struct AtmBuffer *pNextAtmBuf; -+ UINT8 *pDataBuf; -+ UINT32 ulDataLen; -+ UINT16 usDataOffset; -+ UINT16 usReserved; -+ UINT32 ulReserved; -+} ATM_BUFFER, *PATM_BUFFER; -+ -+ -+// ATM_VCC_DATA_PARMS contains fields for sending or receiving data on a VCC. -+// It is used by all BcmAtm_Send... and receive functions. -+typedef void (*FN_FREE_DATA_PARMS) (struct AtmVccDataParms *pDataParms); -+ -+#define ID_ATM_VCC_DATA_PARMS 2 -+typedef struct AtmVccDataParms -+{ -+ UINT32 ulStructureId; -+ UINT8 ucCircuitType; -+ UINT8 ucAal2ChannelId; // [BCM635x Only] -+ UINT8 ucUuData8; -+ UINT8 ucUuData5; -+ UINT8 ucFlags; -+ UINT8 ucSendPriority; -+ UINT8 ucReserved[2]; -+ BCMATM_STATUS baReceiveStatus; -+ PATM_BUFFER pAtmBuffer; -+ FN_FREE_DATA_PARMS pFnFreeDataParms; -+ UINT32 ulParmFreeDataParms; -+ struct AtmVccDataParms *pApplicationLink; -+ UINT32 ulApplicationDefined[2]; -+} ATM_VCC_DATA_PARMS, *PATM_VCC_DATA_PARMS; -+ -+ -+//************************************************************************** -+// Function Prototypes -+//************************************************************************** -+ -+BCMATM_STATUS BcmAtm_Initialize( PATM_INITIALIZATION_PARMS pInitValues ); -+BCMATM_STATUS BcmAtm_Uninitialize( void ); -+BCMATM_STATUS BcmAtm_GetInterfaceId( UINT8 ucPhyPort, UINT32 *pulInterfaceId ); -+BCMATM_STATUS BcmAtm_GetTrafficDescrTableSize(UINT32 *pulTrafficDescrTableSize); -+BCMATM_STATUS BcmAtm_GetTrafficDescrTable( PATM_TRAFFIC_DESCR_PARM_ENTRY -+ pTrafficDescTable, UINT32 ulTrafficDescrTableSize ); -+BCMATM_STATUS BcmAtm_SetTrafficDescrTable( PATM_TRAFFIC_DESCR_PARM_ENTRY -+ pTrafficDescTable, UINT32 ulTrafficDescrTableSize ); -+BCMATM_STATUS BcmAtm_GetInterfaceCfg( UINT32 ulInterfaceId, PATM_INTERFACE_CFG -+ pInterfaceCfg ); -+BCMATM_STATUS BcmAtm_SetInterfaceCfg( UINT32 ulInterfaceId, PATM_INTERFACE_CFG -+ pInterfaceCfg ); -+BCMATM_STATUS BcmAtm_GetVccCfg( PATM_VCC_ADDR pVccAddr, PATM_VCC_CFG pVccCfg ); -+BCMATM_STATUS BcmAtm_SetVccCfg( PATM_VCC_ADDR pVccAddr, PATM_VCC_CFG pVccCfg ); -+BCMATM_STATUS BcmAtm_GetVccAddrs( UINT32 ulInterfaceId, PATM_VCC_ADDR pVccAddrs, -+ UINT32 ulNumVccs, UINT32 *pulNumReturned ); -+BCMATM_STATUS BcmAtm_GetInterfaceStatistics( UINT32 ulInterfaceId, -+ PATM_INTERFACE_STATS pStatistics, UINT32 ulReset ); -+BCMATM_STATUS BcmAtm_GetVccStatistics( PATM_VCC_ADDR pVccAddr, PATM_VCC_STATS -+ pVccStatistics, UINT32 ulReset ); -+BCMATM_STATUS BcmAtm_SetInterfaceLinkInfo( UINT32 ulInterfaceId, -+ PATM_INTERFACE_LINK_INFO pInterfaceCfg ); -+BCMATM_STATUS BcmAtm_SetNotifyCallback( FN_NOTIFY_CB pFnNotifyCb ); -+BCMATM_STATUS BcmAtm_ResetNotifyCallback( FN_NOTIFY_CB pFnNotifyCb ); -+BCMATM_STATUS BcmAtm_AttachVcc( PATM_VCC_ADDR pVccAddr, PATM_VCC_ATTACH_PARMS -+ pAttachParms ); -+BCMATM_STATUS BcmAtm_AttachMgmtCells( UINT32 ulInterfaceId, -+ PATM_VCC_ATTACH_PARMS pAttachParms ); -+BCMATM_STATUS BcmAtm_AttachTransparent( UINT32 ulInterfaceId, -+ PATM_VCC_ATTACH_PARMS pAttachParms ); -+BCMATM_STATUS BcmAtm_Detach( UINT32 ulHandle ); -+BCMATM_STATUS BcmAtm_SetAal2ChannelIds( UINT32 ulHandle, -+ PATM_VCC_AAL2_CHANNEL_ID_PARMS pChannelIdParms, UINT32 -+ ulNumChannelIdParms ); // [BCM635x Only] -+BCMATM_STATUS BcmAtm_SendVccData( UINT32 ulHandle, -+ PATM_VCC_DATA_PARMS pDataParms ); -+BCMATM_STATUS BcmAtm_SendMgmtData( UINT32 ulHandle, PATM_VCC_ADDR pVccAddr, -+ PATM_VCC_DATA_PARMS pDataParms ); -+BCMATM_STATUS BcmAtm_SendTransparentData( UINT32 ulHandle, UINT32 ulInterfaceId, -+ PATM_VCC_DATA_PARMS pDataParms ); -+ -+#if defined(__cplusplus) -+} -+#endif -+ -+#endif // _BCMATMAPI_H_ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcmnet.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcmnet.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcmnet.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcmnet.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,78 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/***********************************************************************/ -+/* */ -+/* MODULE: bcmnet.h */ -+/* DATE: 05/16/02 */ -+/* PURPOSE: network interface ioctl definition */ -+/* */ -+/***********************************************************************/ -+#ifndef _IF_NET_H_ -+#define _IF_NET_H_ -+ -+#if __cplusplus -+extern "C" { -+#endif -+ -+#define LINKSTATE_DOWN 0 -+#define LINKSTATE_UP 1 -+ -+/*---------------------------------------------------------------------*/ -+/* Ethernet Switch Type */ -+/*---------------------------------------------------------------------*/ -+#define ESW_TYPE_UNDEFINED 0 -+#define ESW_TYPE_BCM5325M 1 -+#define ESW_TYPE_BCM5325E 2 -+#define ESW_TYPE_BCM5325F 3 -+ -+/* -+ * Ioctl definitions. -+ */ -+/* reserved SIOCDEVPRIVATE */ -+enum { -+ SIOCGLINKSTATE = SIOCDEVPRIVATE + 1, -+ SIOCSCLEARMIBCNTR, -+ SIOCGIFTRANSSTART, -+ SIOCMIBINFO, -+ SIOCSDUPLEX, /* 0: auto 1: full 2: half */ -+ SIOCSSPEED, /* 0: auto 1: 100mbps 2: 10mbps */ -+ SIOCCIFSTATS, -+ SIOCGENABLEVLAN, -+ SIOCGDISABLEVLAN, -+ SIOCGQUERYNUMVLANPORTS, -+ SIOCGSWITCHTYPE, -+ SIOCGQUERYNUMPORTS, -+ SIOCLAST -+}; -+ -+#define SPEED_10MBIT 10000000 -+#define SPEED_100MBIT 100000000 -+ -+typedef struct IoctlMibInfo -+{ -+ unsigned long ulIfLastChange; -+ unsigned long ulIfSpeed; -+} IOCTL_MIB_INFO, *PIOCTL_MIB_INFO; -+ -+ -+#if __cplusplus -+} -+#endif -+ -+#endif /* _IF_NET_H_ */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcmos.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcmos.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcmos.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcmos.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,98 @@ -+/*************************************************************************** -+* Copyright 2000 Broadcom Corporation -+* All Rights Reserved -+* No portions of this material may be reproduced in any form without the -+* written permission of: -+* Broadcom Corporation -+* 16251 Laguna Canyon Road -+* Irvine, California 92618 -+* All information contained in this document is Broadcom Corporation -+* company private, proprietary, and trade secret. -+* -+**************************************************************************** -+* -+* Filename: bcmos.h -+* Creation Date: 8 June 2000 (v0.00) -+* VSS Info: -+* $Revision: 16 $ -+* $Date: 5/03/01 5:03p $ -+* -+**************************************************************************** -+* Description: -+* -+* Broadcom Generic Operating System Functions. -+* -+****************************************************************************/ -+ -+#ifndef _BCMOS_H -+#define _BCMOS_H -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#ifdef __KERNEL__ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#define malloc(arg) kmalloc(arg, GFP_KERNEL) -+#define free(arg) kfree(arg) -+ -+#define BCMOS_ASSERT(expr) \ -+if ((expr)? 0:1) \ -+{ \ -+ printk(" ASSERT !!! File %s, line %u \n", __FILE__, __LINE__); \ -+ bosSleep( 10 ); \ -+ cli(); /* Disable interrupts */ \ -+ while(1){ ; } \ -+} -+ -+#define CXC_ASSERT BCMOS_ASSERT // For compatibility with CX's endpoint -+ -+/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!*/ -+/* Special BOS definitions */ -+/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!*/ -+#define DSL_NO_RESETSUPPORT -+ -+ -+#define bosSocketHtoNL( num ) ((UINT32)( num )) -+#define bosSocketHtoNS( num ) ((UINT16)( num )) -+#define bosSocketNtoHL( num ) ((UINT32)( num )) -+#define bosSocketNtoHS( num ) ((UINT16)( num )) -+#define bosSocketNtoHS( num ) ((UINT16)( num )) -+#define bosSocketNtoHU16 bosSocketNtoHS -+ -+ -+#else /* LINUX */ -+ -+#include -+#include -+#include -+#include -+ -+#define BCMOS_TASKNAME( nameVar, nameStr ) char nameVar[] = nameStr -+ -+#define TEN_MSEC 10 -+#define TWENTY_MSEC 20 -+#define ONE_HUNDRED_MSEC 100 -+#define FIVE_HUNDRED_MSEC 500 -+#define ONE_SECOND 1000 -+#define TWO_SECONDS 2000 -+ -+#define BCMOS_ASSERT( expr) assert( expr ) -+ -+#endif -+ -+#ifdef __cplusplus -+ } -+#endif -+ -+ -+#endif /* _BCMOS_H */ -+ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/cxcEnv.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/cxcEnv.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/cxcEnv.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/cxcEnv.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,79 @@ -+/*************************************************************************** -+* Copyright 2000 Broadcom Corporation -+* All Rights Reserved -+* No portions of this material may be reproduced in any form without the -+* written permission of: -+* Broadcom Corporation -+* 16251 Laguna Canyon Road -+* Irvine, California 92618 -+* All information contained in this document is Broadcom Corporation -+* company private, proprietary, and trade secret. -+* -+**************************************************************************** -+* -+* Filename: cxcEnv.h -+* Creation Date: -+* VSS Info: -+* $Revision: 43 $ -+* $Date: 12/03/02 5:50p $ -+* -+**************************************************************************** -+* Description: -+* -+* This file is used in CableX to provide system-wide types and definitions. Howewever. -+* since iit tries to include various C run-time library dcefintions (eh stdio.h, it is not -+* appropriate for use "as is" in a Linux kernel environment. So the CableX endpoint source -+* does not need to change, we use this file to recursively include bcmtypes.h -+* -+* NOTE: This file is based upon LDX's hausenv.h, but has been renamed to -+* avoid project dependencies, and allow for CablexChange customizations. -+* -+****************************************************************************/ -+ -+#ifndef CXC_ENV_H -+#define CXC_ENV_H -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/* -------------------------------------------------------------------------- -+** Just include definitions from bcmtypes.h -+*/ -+#include -+ -+#undef EPT_TEST -+ -+#if !defined( HAUS_SINT16_DEFINED ) -+#define HAUS_SINT16_DEFINED -+typedef signed short SINT16; /* SINT16 is platform independant */ -+#endif -+ -+ -+#if !defined( HAUS_SINT32_DEFINED ) -+#define HAUS_SINT32_DEFINED -+typedef signed long SINT32; -+#endif -+ -+#define SUCCESS 0 -+#define FAILURE 1 -+ -+ -+// GNU definition imported from cxc_compiler.h -+#define CXC_INLINE __inline__ -+ -+// Endian-ness imported from cxc_cpu.h -+#define CXC_CPU_BIG_ENDIAN 1 -+#define CXC_CPU_LITTLE_ENDIAN 0 -+ -+#if defined(__KERNEL__) -+#define CXC_OS_LINUX 1 -+#define PSOS 0 -+#define VXWORKS 0 -+#endif -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* CXC_ENV_H */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/cxcLog.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/cxcLog.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/cxcLog.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/cxcLog.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,34 @@ -+/*************************************************************************** -+* Copyright 2000 Broadcom Corporation -+* All Rights Reserved -+* No portions of this material may be reproduced in any form without the -+* written permission of: -+* Broadcom Corporation -+* 16251 Laguna Canyon Road -+* Irvine, California 92618 -+* All information contained in this document is Broadcom Corporation -+* company private, proprietary, and trade secret. -+* -+**************************************************************************** -+* -+* Filename: log.h -+* Creation Date: 17 September 2001 (v0.00) -+* VSS Info: -+* $Revision: 3 $ -+* $Date: 11/13/02 3:42p $ -+* -+**************************************************************************** -+* Description: -+* -+* This filename is preserved in order to minimize the changes -+* in the endpoint code, which is shared with the Cablex endpoint. -+* cxcLog.h simply includes log.h, which contains the log macros. -+* -+****************************************************************************/ -+ -+#ifndef CXC_LOG_H -+#define CXC_LOG_H -+ -+#include -+ -+#endif /* CXC_LOG_H */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/endpointdrv.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/endpointdrv.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/endpointdrv.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/endpointdrv.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,243 @@ -+/*************************************************************************** -+ * Broadcom Corp. Confidential -+ * Copyright 2001 Broadcom Corp. All Rights Reserved. -+ * -+ * THIS SOFTWARE MAY ONLY BE USED SUBJECT TO AN EXECUTED -+ * SOFTWARE LICENSE AGREEMENT BETWEEN THE USER AND BROADCOM. -+ * YOU HAVE NO RIGHT TO USE OR EXPLOIT THIS MATERIAL EXCEPT -+ * SUBJECT TO THE TERMS OF SUCH AN AGREEMENT. -+ * -+ *************************************************************************** -+ * File Name : EndpointDrv.h -+ * -+ * Description: This file contains the definitions and structures for the -+ * Linux IOCTL interface that used between the user mode Endpoint -+ * API library and the kernel Endpoint API driver. -+ * -+ * Updates : 04/04/2002 YD. Created. -+ ***************************************************************************/ -+ -+#if !defined(_ENDPOINTDRV_H_) -+#define _ENDPOINTDRV_H_ -+ -+#if defined(__cplusplus) -+extern "C" { -+#endif -+ -+/* Includes. */ -+#include -+#include -+#include -+ -+/* Maximum size for the event data passed with the event callback */ -+#define MAX_EVENTDATA_SIZE 256 -+ -+typedef enum ENDPOINTIOCTL_INDEX -+{ -+ ENDPTIO_INIT_INDEX = 0, -+ ENDPTIO_DEINIT_INDEX, -+ ENDPTIO_CREATE_INDEX, -+ ENDPTIO_CAPABILITIES_INDEX, -+ ENDPTIO_SIGNAL_INDEX, -+ ENDPTIO_CREATE_CONNECTION_INDEX, -+ ENDPTIO_MODIFY_CONNECTION_INDEX, -+ ENDPTIO_DELETE_CONNECTION_INDEX, -+ ENDPTIO_PACKET_INDEX, -+ ENDPTIO_GET_PACKET_INDEX, -+ ENDPTIO_GET_EVENT_INDEX, -+ ENDPTIO_GET_CODECMAP_INDEX, -+ ENDPTIO_VOICESTAT_INDEX, -+ ENDPTIO_ISINITIALIZED_INDEX, -+ ENDPTIO_CONSOLE_CMD_INDEX, -+ ENDPTIO_TEST_INDEX, -+ ENDPTIO_ENDPOINTCOUNT_INDEX, -+ ENDPTIO_MAX_INDEX -+} ENDPOINTIOCTL_INDEX; -+ -+ -+/* Defines. */ -+#define ENDPOINTDRV_MAJOR 209 /* arbitrary unused value */ -+ -+#define ENDPOINTIOCTL_ENDPT_INIT \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_INIT_INDEX, ENDPOINTDRV_INIT_PARAM) -+ -+#define ENDPOINTIOCTL_ENDPT_DEINIT \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_DEINIT_INDEX, ENDPOINTDRV_INIT_PARAM) -+ -+#define ENDPOINTIOCTL_ENDPT_CREATE \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_CREATE_INDEX, ENDPOINTDRV_CREATE_PARM) -+ -+#define ENDPOINTIOCTL_ENDPT_CAPABILITIES \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_CAPABILITIES_INDEX, ENDPOINTDRV_CAP_PARM) -+ -+#define ENDPOINTIOCTL_ENDPT_SIGNAL \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_SIGNAL_INDEX, ENDPOINTDRV_SIGNAL_PARM) -+ -+#define ENDPOINTIOCTL_ENDPT_CREATE_CONNECTION \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_CREATE_CONNECTION_INDEX, ENDPOINTDRV_CONNECTION_PARM) -+ -+#define ENDPOINTIOCTL_ENDPT_MODIFY_CONNECTION \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_MODIFY_CONNECTION_INDEX, ENDPOINTDRV_CONNECTION_PARM) -+ -+#define ENDPOINTIOCTL_ENDPT_DELETE_CONNECTION \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_DELETE_CONNECTION_INDEX, ENDPOINTDRV_DELCONNECTION_PARM) -+ -+#define ENDPOINTIOCTL_ENDPT_PACKET \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_PACKET_INDEX, ENDPOINTDRV_PACKET_PARM) -+ -+#define ENDPOINTIOCTL_ENDPT_GET_PACKET \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_GET_PACKET_INDEX, ENDPOINTDRV_PACKET_PARM) -+ -+#define ENDPOINTIOCTL_ENDPT_GET_EVENT \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_GET_EVENT_INDEX, ENDPOINTDRV_EVENT_PARM) -+ -+#define ENDPOINTIOCTL_ENDPT_GET_CODECMAP \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_GET_CODECMAP_INDEX, ENDPOINTDRV_CODECMAP_PARM) -+ -+#define ENDPOINTIOCTL_ENDPT_VOICESTAT \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_VOICESTAT_INDEX, ENDPOINTDRV_VOICESTAT_PARM) -+ -+#define ENDPOINTIOCTL_ISINITIALIZED \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_ISINITIALIZED_INDEX, ENDPOINTDRV_ISINITIALIZED_PARM) -+ -+#define ENDPOINTIOCTL_ENDPT_CONSOLE_CMD \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_CONSOLE_CMD_INDEX, ENDPOINTDRV_CONSOLE_CMD_PARM) -+ -+#define ENDPOINTIOCTL_TEST \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_TEST_INDEX, ENDPOINTDRV_TESTPARM) -+ -+#define ENDPOINTIOCTL_ENDPOINTCOUNT \ -+ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_ENDPOINTCOUNT_INDEX, ENDPOINTDRV_ENDPOINTCOUNT_PARM) -+ -+#define MAX_ENDPOINTDRV_IOCTL_COMMANDS ENDPTIO_MAX_INDEX -+ -+ -+typedef struct -+{ -+ UINT32 size; /* Size of the structure (including the size field) */ -+ VRG_COUNTRY country; -+ EPSTATUS epStatus; -+} ENDPOINTDRV_INIT_PARAM, *PENDPOINTDRV_INIT_PARAM; -+ -+typedef struct -+{ -+ UINT32 size; /* Size of the structure (including the size field) */ -+ UINT32 physId; -+ UINT32 lineId; -+ VRG_ENDPT_STATE* endptState; -+ EPSTATUS epStatus; -+} ENDPOINTDRV_CREATE_PARM, *PENDPOINTDRV_CREATE_PARM; -+ -+typedef struct -+{ -+ UINT32 size; /* Size of the structure (including the size field) */ -+ EPZCAP* capabilities; -+ ENDPT_STATE* state; -+ EPSTATUS epStatus; -+} ENDPOINTDRV_CAP_PARM, *PENDPOINTDRV_CAP_PARM; -+ -+typedef struct -+{ -+ UINT32 size; /* Size of the structure (including the size field) */ -+ ENDPT_STATE* state; -+ UINT32 cnxId; -+ EPSIG signal; -+ UINT32 value; // Reserve an array, can be a pointer -+ EPSTATUS epStatus; -+ int duration; -+ int period; -+ int repetition; -+} ENDPOINTDRV_SIGNAL_PARM, *PENDPOINTDRV_SIGNAL_PARM; -+ -+typedef struct -+{ -+ UINT32 size; /* Size of the structure (including the size field) */ -+ ENDPT_STATE* state; -+ int cnxId; -+ EPZCNXPARAM* cnxParam; -+ EPSTATUS epStatus; -+} ENDPOINTDRV_CONNECTION_PARM, *PENDPOINTDRV_CONNECTION_PARM; -+ -+typedef struct -+{ -+ UINT32 size; /* Size of the structure (including the size field) */ -+ ENDPT_STATE* state; -+ int cnxId; -+ EPSTATUS epStatus; -+} ENDPOINTDRV_DELCONNECTION_PARM, *PENDPOINTDRV_DELCONNECTION_PARM; -+ -+typedef struct -+{ -+ UINT32 size; /* Size of the structure (including the size field) */ -+ ENDPT_STATE* state; -+ int cnxId; -+ EPPACKET* epPacket; -+ int length; -+ UINT32 bufDesc; -+ EPSTATUS epStatus; -+} ENDPOINTDRV_PACKET_PARM, *PENDPOINTDRV_PACKET_PARM; -+ -+typedef struct -+{ -+ UINT32 size; /* Size of the structure (including the size field) */ -+ int lineId; -+ int cnxId; -+ int length; -+ EPEVT event; -+ UINT8 eventData[MAX_EVENTDATA_SIZE]; -+} ENDPOINTDRV_EVENT_PARM, *PENDPOINTDRV_EVENT_PARM; -+ -+typedef struct -+{ -+ UINT32 size; /* Size of the structure (including the size field) */ -+ int isInitialized; -+} ENDPOINTDRV_ISINITIALIZED_PARM, *PENDPOINTDRV_ISINITIALIZED_PARM; -+ -+typedef struct -+{ -+ UINT32 size; /* Size of the structure (including the size field) */ -+ UINT32 testParm1; -+ UINT32 testParm2; -+ EPZCNXPARAM* testParm3; -+ EPSTATUS epStatus; -+} ENDPOINTDRV_TESTPARM, *PENDPOINTDRV_TESTPARM; -+ -+typedef struct ENDPOINTDRV_PACKET -+{ -+ UINT32 size; /* Size of the structure (including the size field) */ -+ int cnxId; -+ int length; -+ EPMEDIATYPE mediaType; -+ UINT8 data[1024]; -+} ENDPOINTDRV_PACKET; -+ -+typedef struct ENDPOINTDRV_VOICESTAT_PARM -+{ -+ int lineId; -+ ENDPT_VOICE_STATS* stats; -+ EPSTATUS epStatus; -+} ENDPOINTDRV_VOICESTAT_PARM, *PENDPOINTDRV_VOICESTAT_PARM; -+ -+typedef struct ENDPOINTDRV_CONSOLE_CMD_PARM -+{ -+ UINT32 size; /* Size of the structure (including the size field) */ -+ int lineId; -+ int cnxId; -+ int cmd; -+ ENDPT_STATE* state; -+ EPSTATUS epStatus; -+} ENDPOINTDRV_CONSOLE_CMD_PARM, *PENDPOINTDRV_CONSOLE_CMD_PARM; -+ -+ -+typedef struct -+{ -+ UINT32 size; /* Size of the structure (including the size field) */ -+ int endpointNum; -+} ENDPOINTDRV_ENDPOINTCOUNT_PARM, *PENDPOINTDRV_ENDPOINTCOUNT_PARM; -+ -+ -+#if defined(__cplusplus) -+} -+#endif -+ -+#endif // _ENDPOINTDRV_H_ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/endptvoicestats.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/endptvoicestats.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/endptvoicestats.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/endptvoicestats.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,106 @@ -+/*************************************************************************** -+ * Broadcom Corp. Confidential -+ * Copyright 2001 Broadcom Corp. All Rights Reserved. -+ * -+ * THIS SOFTWARE MAY ONLY BE USED SUBJECT TO AN EXECUTED -+ * SOFTWARE LICENSE AGREEMENT BETWEEN THE USER AND BROADCOM. -+ * YOU HAVE NO RIGHT TO USE OR EXPLOIT THIS MATERIAL EXCEPT -+ * SUBJECT TO THE TERMS OF SUCH AN AGREEMENT. -+ * -+ *************************************************************************** -+ * File Name : endptvoicestats.h -+ * -+ * Description: This file contains the definitions of the voice statistics -+ * structures. This file should be used in user space when -+ * working with the voice statistics structure. -+ * -+ * The files hpnet.h and hppve.h -+ * should not be included in user space because of a conflict -+ * in the definitions supplied by hausenv.h (in the endpoint/vocm/ -+ * ldxIntf/dspinc directory) and the definitions supplied by bcmtypes.h -+ * (in the /sgibcm_2_4_17/linux/include/asm-mips/bcm96345 directory). -+ * -+ * Updates : -+ ***************************************************************************/ -+ -+#if !defined(ENDPTSTATS_H) -+#define ENDPTSTATS_H -+ -+#if defined(__cplusplus) -+extern "C" { -+#endif -+ -+typedef struct -+{ -+#ifdef ENDPT_6345 -+ UINT16 peakHoldingTime; /* Peak Holding Time since last statistic */ -+ -+ /* Total number of superpackets arriving on the egress path */ -+ UINT16 packetCount; /* # of packets received */ -+ -+ /* addTail and reorder are successful additions to the JB */ -+ /* addTail is typically 1..N times the packetCount if superpackets are enabled */ -+ UINT16 addTailCount; /* # of frames added to tail of JB - normal case */ -+ UINT16 reorderCount; /* # of frames reordered */ -+ -+ /* overrun, duplicate, outOfRange, tooLate, jitterMax excess are packets that have been discarded */ -+ UINT16 overrunCount; /* Decoder overrun count */ -+ UINT16 duplicateCount; /* # of duplicate frames deleted */ -+ UINT16 outOfRangeCount; /* # of frames with timestamps too far from current TS to be handled */ -+ UINT16 tooLateCount; /* Packet arrived too late (it's redundant mate already played) */ -+ -+ /* cantDecode are packets that can't be played out due to algorithm not available */ -+ UINT16 cantDecodeCount; /* Can't decode packet - decoder not in load or pkt hdr bad */ -+ -+ /* The following are internal to the AJC module - they do not represent physical packets */ -+ UINT16 ajcUnderrunCount; /* Adaptive Jitter Control: jitter buffer underruns */ -+ UINT16 ajcDeleteCount; /* Adaptive Jitter Control: # of packet deletes done to reduce holding time */ -+ UINT16 ajcRepeatCount; /* Adaptive Jitter Control: # of packet repeats done to either increase holding time -+ or due to late frame or lost frames. */ -+ UINT16 ajcResyncCount; /* Number of times ajb resynced (went through buildout state) */ -+ UINT16 ajcPhaseJitterCount; /* Number of times ajb inserted a phase discontinuity -+ (possibly in silence or during CNG or due to a repeat/delete). */ -+ /* 14 entries. Make sure this is even (!) */ -+#else -+ UINT16 peakHoldingTime; /* Peak Holding Time since last statistic */ -+ UINT16 minimumHoldingTime; /* Long-term tracker of min. Hold Time */ -+ UINT16 targetHoldingTime; /* Target holding Time */ -+ UINT16 inactiveFrameCount; /* Inactive Frame Count */ -+ UINT16 activeFrameCount; /* Active Frame Count */ -+ UINT16 hsxDecoderOverrunCount; /* Decoder overrun count */ -+ UINT16 hsxDecoderUnderrunCount; /* Decoder underrun count */ -+ UINT16 lostFrameCount; /* Lost frames resulting in frame repeat */ -+#endif -+} ENDPT_VOICE_DECODERSTATS; -+ -+/* Encoder Statistics */ -+typedef struct -+{ -+#ifdef ENDPT_6345 -+ UINT16 inactiveFrameCount; /* Inactive Frame Count of Suppressed Frames*/ -+ UINT16 activeFrameCount; /* Active Frame Count - actually sent ingress */ -+ UINT16 sidFrameCount; /* SID Frame Count */ -+ UINT16 toneRelayCount; /* # of tone packets from PTE relayed ingress */ -+#else -+ UINT16 hsxEncoderOverrunCount; /* Encoder overrun count */ -+#endif -+} ENDPT_VOICE_ENCODERSTATS; -+ -+ -+typedef struct -+{ -+ ENDPT_VOICE_DECODERSTATS decoder; -+ ENDPT_VOICE_ENCODERSTATS encoder; -+} ENDPT_VOICE_PVE_STATS; -+ -+typedef struct -+{ -+ ENDPT_VOICE_PVE_STATS hsxPVEstats; /* statistics for PVE encoder and decoder */ -+ -+} ENDPT_VOICE_STATS; -+ -+#if defined(__cplusplus) -+} -+#endif -+ -+#endif /* ENDPTSTATS_H */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/log.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/log.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/log.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/log.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,104 @@ -+/*************************************************************************** -+* Copyright 2000 Broadcom Corporation -+* All Rights Reserved -+* No portions of this material may be reproduced in any form without the -+* written permission of: -+* Broadcom Corporation -+* 16251 Laguna Canyon Road -+* Irvine, California 92618 -+* All information contained in this document is Broadcom Corporation -+* company private, proprietary, and trade secret. -+* -+**************************************************************************** -+* -+* Filename: log.h -+* Creation Date: 4 July 2000 (v0.00) -+* VSS Info: -+* $Revision: 23 $ -+* $Date: 9/14/01 4:54p $ -+* -+**************************************************************************** -+* Description: -+* -+* This header file contains the needed macros and function prototypes -+* for logging on the terminal. -+* -+****************************************************************************/ -+ -+#ifndef LOG_H -+#define LOG_H -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#define LOG_DBG -+ -+#if (! (defined(__KERNEL__) || defined (LINUX)) ) -+ -+extern void Log( char const *format,...); -+extern void LogMsg( char *string ); -+extern void LogDirectSerial( char const *format,...); -+ -+#define PANIC(m) Log(m) -+#define LOG(fmt) Log fmt -+#define LOGERROR(fmt) Log fmt -+#define LOG1(fmt) Log fmt /* Level 1 logging */ -+#define LOG2(fmt) /* Level 2 logging */ -+#define LOGMSG(buf) LogMsg buf -+ -+/*********************************** -+** Error logging * -+***********************************/ -+#elif defined(__KERNEL__) -+ -+#define LOG(fmt) printk fmt ; printk("\n"); -+#define LOG_RAW(fmt) printk fmt ; printk("\n"); -+#define PANIC(fmt) printk("!!! PANIC !!! \n"); printk fmt ; printk("\n"); -+#define LOGERROR(fmt) printk("!!! ERROR !!! \n"); printk fmt ; printk("\n"); -+ -+#elif defined(LINUX) -+ -+#include -+ -+#ifdef LOG_DBG -+ -+#include -+ -+#define LOG(fmt) \ -+{ \ -+ struct tm *tm_ptr; \ -+ time_t curtime; \ -+ time( &curtime ); \ -+ tm_ptr = gmtime( &curtime ); \ -+ printf("%02d:%02d:%02d ", \ -+ tm_ptr->tm_hour, \ -+ tm_ptr->tm_min, \ -+ tm_ptr->tm_sec); \ -+ printf fmt; \ -+ printf("\n"); \ -+} -+#else -+#define LOG(fmt) printf fmt ; printf("\n"); -+#endif /* LOG_DBG */ -+ -+#define PANIC(fmt) printk("!!! PANIC !!! \n"); printk fmt ; printk("\n"); -+#define LOGERROR(fmt) \ -+{ \ -+ printf("ERROR !!! File %s (line %u): ", __FILE__, __LINE__);\ -+ printf fmt; \ -+ printf("\n"); \ -+} -+ -+#else -+#error Unknown OS -+#endif -+ -+#ifdef __cplusplus -+ } -+#endif -+ -+#endif /* LOG_H */ -+ -+ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/mtacfg.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/mtacfg.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/mtacfg.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/mtacfg.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,72 @@ -+/*************************************************************************** -+* Copyright 2000 Broadcom Corporation -+* All Rights Reserved -+* No portions of this material may be reproduced in any form without the -+* written permission of: -+* Broadcom Corporation -+* 16251 Laguna Canyon Road -+* Irvine, California 92618 -+* All information contained in this document is Broadcom Corporation -+* company private, proprietary, and trade secret. -+* -+**************************************************************************** -+* -+* Filename: mtacfg.h -+* Creation Date: 4 July 2000 (v0.00) -+* VSS Info: -+* $Revision: 23 $ -+* $Date: 9/14/01 4:54p $ -+* -+**************************************************************************** -+* Description: -+* -+* This header file contains all the different build options that -+* are required by CablexChange components. -+* -+****************************************************************************/ -+ -+#ifndef _MTACFG_H -+#define _MTACFG_H -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#include -+#include -+#include -+ -+#define MTA_VERSION_INFO "1.0" -+ -+#if ( defined(IP_MGCP) || defined(IP_H323) || defined(IP_SIP) || defined(IP_MEGACO) ) -+#define VOIP -+#endif -+ -+#ifndef VOIP -+#define ENDPOINT_NULL_SHIM -+#endif -+ -+ -+/*************************************************************** -+** Task Priority options -+****************************************************************/ -+ -+#define RTP_TASK_PRIORITY BCMOS_TASK_PRTY_8 /* task priority for rtp */ -+#define HGCP_TASK_PRIORITY BCMOS_TASK_PRTY_8 /* task priority for HGCP */ -+#define RTCP_TASK_PRIORITY BCMOS_TASK_PRTY_13 /* task priority for rtcp */ -+ -+ -+/* Additional DSL specific definitions not provided by Cable Cfg files */ -+ -+/* For backward compatibility with older code */ -+#define MAX_ENDPT VOCM_CFG_MAX_ENDPT -+#define MAX_CNX VOCM_CFG_MAX_CNX -+ -+#ifdef __cplusplus -+ } -+#endif -+ -+#endif /* MTACFG_H */ -+ -+ -+ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/profdrv.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/profdrv.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/profdrv.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/profdrv.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,151 @@ -+/*************************************************************************** -+* Copyright 2004 Broadcom Corporation -+* All Rights Reserved -+* No portions of this material may be reproduced in any form without the -+* written permission of: -+* Broadcom Corporation -+* 16215 Alton Parkway -+* P.O. Box 57013 -+* Irvine, California 92619-7013 -+* All information contained in this document is Broadcom Corporation -+* company private, proprietary, and trade secret. -+* -+**************************************************************************** -+* -+* Filename: profdrv.h -+* -+**************************************************************************** -+* Description: -+* -+* This file contains the profiler device driver -+* -+****************************************************************************/ -+#ifndef PROFDRV_DEVICE_DRIVER__H__INCLUDED -+#define PROFDRV_DEVICE_DRIVER__H__INCLUDED -+ -+#include -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#define PROFILER_NAME_MAX_LENGTH 32 -+#define PROFILER_MAX_RECSEQ 2048 -+ -+#define PROFILER_CPU_UTIL_VALID_START 0x01 -+#define PROFILER_CPU_UTIL_VALID_STOP 0x02 -+ -+#define PROFILER_SOURCE_USER 0x00 -+#define PROFILER_SOURCE_KERNEL 0x01 -+ -+#ifndef __STR -+#define __STR(x) #x -+#endif -+#ifndef STR -+#define STR(x) __STR(x) -+#endif -+ -+#define profdrv_read_32bit_cp0_register(source) \ -+({ int __res; \ -+ __asm__ __volatile__( \ -+ ".set\tpush\n\t" \ -+ ".set\treorder\n\t" \ -+ "mfc0\t%0,"STR(source)"\n\t" \ -+ ".set\tpop" \ -+ : "=r" (__res)); \ -+ __res;}) -+ -+/* -+ Structure used to pass profiling information data at the user/kernel interface. -+*/ -+typedef struct -+{ -+ char name[PROFILER_NAME_MAX_LENGTH]; -+ -+} PROFILER_IOCTL_DATA; -+ -+/* -+ This structure is used to keep track of the CPU utilization during the profiling period. -+*/ -+typedef struct -+{ -+ unsigned tick_uptime_start; -+ unsigned tick_idle_start; -+ unsigned tick_user_start; -+ unsigned tick_kernel_start; -+ unsigned tick_uptime_stop; -+ unsigned tick_idle_stop; -+ unsigned tick_user_stop; -+ unsigned tick_kernel_stop; -+ unsigned char valid_data; -+ -+} PROFILER_CPU_UTILIZATION; -+ -+/* -+ A generic structure to pass information about the profiler status. -+*/ -+typedef struct -+{ -+ unsigned status; -+ unsigned cpu_jiffies_start; -+ unsigned cpu_jiffies_stop; -+ unsigned cpu_jiffies_factor; -+ unsigned cpu_clock; -+ -+} PROFILER_STATUS; -+ -+/* -+ The ioctl action index. -+*/ -+typedef enum -+{ -+ PROFILER_IOCTL_GET_DATA_DUMP_INDEX, -+ PROFILER_IOCTL_GET_RECSEQ_DATA_DUMP_INDEX, -+ PROFILER_IOCTL_SET_DATA_CLEAN_INDEX, -+ PROFILER_IOCTL_SET_PROF_OPS_INDEX, -+ PROFILER_IOCTL_REGISTER_CALL_INDEX, -+ PROFILER_IOCTL_DEREGISTER_CALL_INDEX, -+ PROFILER_IOCTL_START_CALL_INDEX, -+ PROFILER_IOCTL_STOP_CALL_INDEX, -+ PROFILER_IOCTL_PROFILER_STATUS_INDEX, -+ PROFILER_IOCTL_SET_CPU_UTIL_INDEX, -+ PROFILER_IOCTL_GET_CPU_UTIL_INDEX, -+ PROFILER_IOCTL_GET_RECSEQ_DI_INDEX -+ -+} PROFILER_IOCTL_INDEX; -+ -+/* -+ Assigning a device driver major number for the sake of making this application work -+*/ -+#define PROFDRV_DEVICE_DRIVER_MAJOR 224 -+ -+#define PROFILER_IOCTL_GET_DATA_DUMP \ -+ _IOR( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_GET_DATA_DUMP_INDEX, unsigned ) -+#define PROFILER_IOCTL_GET_RECSEQ_DATA_DUMP \ -+ _IOR( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_GET_RECSEQ_DATA_DUMP_INDEX, unsigned ) -+#define PROFILER_IOCTL_SET_DATA_CLEAN \ -+ _IOW( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_SET_DATA_CLEAN_INDEX, unsigned ) -+#define PROFILER_IOCTL_SET_PROF_OPS \ -+ _IOW( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_SET_PROF_OPS_INDEX, unsigned ) -+#define PROFILER_IOCTL_REGISTER_CALL \ -+ _IOW( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_REGISTER_CALL_INDEX, PROFILER_IOCTL_DATA ) -+#define PROFILER_IOCTL_DEREGISTER_CALL \ -+ _IOW( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_DEREGISTER_CALL_INDEX, PROFILER_IOCTL_DATA ) -+#define PROFILER_IOCTL_START_CALL \ -+ _IOW( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_START_CALL_INDEX, PROFILER_IOCTL_DATA ) -+#define PROFILER_IOCTL_STOP_CALL \ -+ _IOW( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_STOP_CALL_INDEX, PROFILER_IOCTL_DATA ) -+#define PROFILER_IOCTL_PROFILER_STATUS_DATA \ -+ _IOR( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_PROFILER_STATUS_INDEX, PROFILER_STATUS ) -+#define PROFILER_IOCTL_SET_CPU_UTIL \ -+ _IOW( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_SET_CPU_UTIL_INDEX, PROFILER_CPU_UTILIZATION ) -+#define PROFILER_IOCTL_GET_CPU_UTIL \ -+ _IOR( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_GET_CPU_UTIL_INDEX, PROFILER_CPU_UTILIZATION ) -+#define PROFILER_IOCTL_GET_RECSEQ_DATA_INDEX \ -+ _IOR( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_GET_RECSEQ_DI_INDEX, unsigned ) -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* PROFDRV_DEVICE_DRIVER__H__INCLUDED */ -diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/profiler.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/profiler.h ---- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/profiler.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/profiler.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,114 @@ -+/*************************************************************************** -+* Copyright 2004 Broadcom Corporation -+* All Rights Reserved -+* No portions of this material may be reproduced in any form without the -+* written permission of: -+* Broadcom Corporation -+* 16215 Alton Parkway -+* P.O. Box 57013 -+* Irvine, California 92619-7013 -+* All information contained in this document is Broadcom Corporation -+* company private, proprietary, and trade secret. -+* -+**************************************************************************** -+* -+* Filename: profiler.h -+* -+**************************************************************************** -+* Description: -+* -+* This file contains the API definition for usage of the profiler tool -+* -+****************************************************************************/ -+#ifndef PROFILER__H__INCLUDED -+#define PROFILER__H__INCLUDED -+ -+#include "profdrv.h" -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#define PROFILER_MAX_MONITORED_PROFILE 32 -+#define PROFILER_CPU_UTILIZATION_MIN 0.000001 -+#define PROFILER_MISC_STRING_LENGTH 256 -+#define PROFILER_CPU_TICK_FACTOR 2.0 -+#define PROFILER_S2MS_FACTOR 1000.0 -+ -+#define PROFILER_FLAG_RESOURCE_FREE 0x00 -+#define PROFILER_FLAG_RESOURCE_ALLOCATED 0x01 -+#define PROFILER_FLAG_RESOURCE_ERROR 0x02 -+#define PROFILER_FLAG_RESOURCE_COLLECT_PENDING 0x04 -+ -+/* -+ This structure defines the data collected by the profiler. -+*/ -+typedef struct -+{ -+ unsigned char source; /* User or Kernel */ -+ unsigned char flag; /* Generic flag */ -+ char name[PROFILER_NAME_MAX_LENGTH]; /* Name of the function monitored */ -+ unsigned int now_cycle; /* The current cycle count saved */ -+ unsigned int min_cycle; /* The minimum number of cycles calculated for this function */ -+ unsigned int max_cycle; /* The maximum number of cycles calculated for this function */ -+ unsigned int avg_cycle; /* The average numnber of cycles calculated for this function */ -+ unsigned int count; /* The number of time this function has been profiled */ -+ -+} PROFILER_COLLECTED_DATA; -+ -+ -+/* -+ This structure defines the recorded sequence data collected by the profiler. -+*/ -+typedef struct PROFILER_RECSEQ_DATA -+{ -+ unsigned int id; -+ unsigned long startTime; -+ unsigned long endTime; -+} PROFILER_RECSEQ_DATA; -+ -+ -+void kernel_profiler_register( char *pName, unsigned char src ); -+void kernel_profiler_deregister( char *pName, unsigned char src ); -+void kernel_profiler_start( char *pName, unsigned char src ); -+void kernel_profiler_stop( char *pName, unsigned char src ); -+void kernel_profiler_recseq_start( unsigned int id ); -+void kernel_profiler_recseq_stop( unsigned int id ); -+ -+void kernel_profiler_reinit_collected( void ); -+void kernel_profiler_dump( void ); -+void kernel_profiler_recseq_dump( void ); -+void kernel_profiler_start_collect( void ); -+void kernel_profiler_stop_collect( void ); -+ -+ -+void profiler_init( void ); -+void profiler_get_status( PROFILER_STATUS *pStatus ); -+PROFILER_COLLECTED_DATA *profiler_get_data_dump( void ); -+PROFILER_RECSEQ_DATA* profiler_get_recseq_data_dump( void ); -+void profiler_get_cpu_util( PROFILER_CPU_UTILIZATION *pData ); -+void profiler_set_cpu_util( PROFILER_CPU_UTILIZATION *pData ); -+unsigned int profiler_get_recseq_data_index( void ); -+ -+/* -+ This is the generic API that should be used by clients to access the profiler -+*/ -+#define PROFILER_REGISTER( name ) ( kernel_profiler_register( (name), PROFILER_SOURCE_KERNEL ) ) -+#define PROFILER_DEREGISTER( name ) ( kernel_profiler_deregister( (name), PROFILER_SOURCE_KERNEL ) ) -+#define PROFILER_START( name ) ( kernel_profiler_start( (name), PROFILER_SOURCE_KERNEL ) ) -+#define PROFILER_STOP( name ) ( kernel_profiler_stop( (name), PROFILER_SOURCE_KERNEL ) ) -+#define PROFILER_RECSEQ_START( source ) ( kernel_profiler_recseq_start( (source) ) ) -+#define PROFILER_RECSEQ_STOP( source ) ( kernel_profiler_recseq_stop( (source)) ) -+ -+#define PROFILER_REINIT_COLLECTED() ( kernel_profiler_reinit_collected() ) -+#define PROFILER_DUMP() ( kernel_profiler_dump() ) -+#define PROFILER_RECSEQ_DUMP() ( kernel_profiler_recseq_dump() ) -+#define PROFILER_START_COLLECT() ( kernel_profiler_start_collect() ) -+#define PROFILER_STOP_COLLECT() ( kernel_profiler_stop_collect() ) -+ -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* PROFILER__H__INCLUDED */ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/Makefile linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/Makefile ---- linux-2.6.8.1/bcmdrivers/opensource/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/Makefile 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,26 @@ -+# File: modules/drivers/Makefile -+# -+# Makefile for the GPLed Linux kernel modules. -+# -+BRCM_BOARD:=bcm963xx -+BRCM_CHIP:=6348 -+LN_NAME=bcm9$(BRCM_CHIP) -+LN_DRIVER_DIRS = -+ -+-include $(KERNEL_DIR)/.config -+ -+ifneq ($(CONFIG_BCM_BOARD),) -+ LN_DRIVER_DIRS +=ln -sn impl$(CONFIG_BCM_BOARD_IMPL) char/board/$(BRCM_BOARD)/$(LN_NAME); -+endif -+ -+ifneq ($(CONFIG_BCM_SERIAL),) -+ LN_DRIVER_DIRS +=ln -sn impl$(CONFIG_BCM_SERIAL_IMPL) char/serial/$(LN_NAME); -+endif -+ -+obj-$(CONFIG_BCM_BOARD) += char/board/$(BRCM_BOARD)/$(LN_NAME)/ -+obj-$(CONFIG_BCM_SERIAL) += char/serial/$(LN_NAME)/ -+ -+ -+symlinks: -+ find . -lname "*" -name "$(LN_NAME)" -print -exec rm -f "{}" ";" -+ $(CONFIG_SHELL) -c "$(LN_DRIVER_DIRS)" -diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/Makefile linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/Makefile ---- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/Makefile 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,17 @@ -+# Makefile for the bcm963xx board drivers -+# -+ -+ -+obj-y := board.o cfiflash.o bcm63xx_flash.o bcm63xx_led.o -+ -+EXTRA_CFLAGS += -I. -I$(INC_BRCMBOARDPARMS_PATH)/$(BRCM_BOARD) -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD) -+ -+ifeq ($(strip $(WIRELESS)),1) -+ EXTRA_CFLAGS += -DWIRELESS -+endif -+ -+-include $(TOPDIR)/Rules.make -+ -+clean: -+ rm -f core *.o *.a *.s -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/bcm63xx_flash.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/bcm63xx_flash.c ---- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/bcm63xx_flash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/bcm63xx_flash.c 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,775 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ *************************************************************************** -+ * File Name : bcm63xx_flash.c -+ * -+ * Description: This file contains the flash device driver APIs for bcm63xx board. -+ * -+ * Created on : 8/10/2002 seanl: use cfiflash.c, cfliflash.h (AMD specific) -+ * -+ ***************************************************************************/ -+ -+ -+/* Includes. */ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#define BCMTAG_EXE_USE -+#include -+#include "cfiflash.h" -+#include "boardparms.h" -+ -+//#define DEBUG_FLASH -+ -+static FLASH_ADDR_INFO fInfo; -+static int flashInitialized = 0; -+ -+void *retriedKmalloc(size_t size) -+{ -+ void *pBuf; -+ int tryCount = 0; -+ -+ // try 1000 times before quit -+ while (((pBuf = kmalloc(size, GFP_KERNEL)) == NULL) && (tryCount++ < 1000)) -+ { -+ current->state = TASK_INTERRUPTIBLE; -+ schedule_timeout(HZ/10); -+ } -+ if (tryCount >= 1000) -+ pBuf = NULL; -+ else -+ memset(pBuf, 0, size); -+ -+ return pBuf; -+} -+ -+void retriedKfree(void *pBuf) -+{ -+ kfree(pBuf); -+} -+ -+/*************************************************************************** -+// Function Name: getCrc32 -+// Description : caculate the CRC 32 of the given data. -+// Parameters : pdata - array of data. -+// size - number of input data bytes. -+// crc - either CRC32_INIT_VALUE or previous return value. -+// Returns : crc. -+****************************************************************************/ -+UINT32 getCrc32(byte *pdata, UINT32 size, UINT32 crc) -+{ -+ while (size-- > 0) -+ crc = (crc >> 8) ^ Crc32_table[(crc ^ *pdata++) & 0xff]; -+ -+ return crc; -+} -+ -+// get the nvram start addr -+// -+unsigned long get_nvram_start_addr(void) -+{ -+ return ((unsigned long) -+ (flash_get_memptr(fInfo.flash_nvram_start_blk) + fInfo.flash_nvram_blk_offset)); -+} -+ -+// get the scratch_pad start addr -+// -+unsigned long get_scratch_pad_start_addr(void) -+{ -+ return ((unsigned long) -+ (flash_get_memptr(fInfo.flash_scratch_pad_start_blk) + fInfo.flash_scratch_pad_blk_offset)); -+} -+ -+ -+ -+/* ********************************************************************* -+ * kerSysImageTagGet() -+ * Get the image tag -+ * Input parameters: -+ * none -+ * Return value: -+ * point to tag -- Found -+ * NULL -- failed -+ ********************************************************************* */ -+PFILE_TAG kerSysImageTagGet(void) -+{ -+ int i; -+ int totalBlks = flash_get_numsectors(); -+ UINT32 crc; -+ unsigned char *sectAddr; -+ PFILE_TAG pTag; -+ -+#if defined(DEBUG_FLASH) -+ printk("totalblks in tagGet=%d\n", totalBlks); -+#endif -+ -+ // start from 2nd blk, assume 1st one is always CFE -+ for (i = 1; i < totalBlks; i++) -+ { -+ sectAddr = flash_get_memptr((byte) i); -+ crc = CRC32_INIT_VALUE; -+ crc = getCrc32(sectAddr, (UINT32)TAG_LEN-TOKEN_LEN, crc); -+ pTag = (PFILE_TAG) sectAddr; -+ -+#if defined(DEBUG_FLASH) -+ printk("Check Tag crc on blk [%d]\n", i); -+#endif -+ -+ if (crc == (UINT32)(*(UINT32*)(pTag->tagValidationToken))) -+ return pTag; -+ } -+ -+ return (PFILE_TAG) NULL; -+} -+ -+// Initialize the flash and fill out the fInfo structure -+void kerSysFlashInit( void ) -+{ -+ int i = 0; -+ int totalBlks = 0; -+ int totalSize = 0; -+ int startAddr = 0; -+ int usedBlkSize = 0; -+ NVRAM_DATA nvramData; -+ UINT32 crc = CRC32_INIT_VALUE, savedCrc; -+ PFILE_TAG pTag = NULL; -+ unsigned long kernelEndAddr = 0; -+ unsigned long spAddr = 0; -+ -+ if (flashInitialized) -+ return; -+ -+ flashInitialized = 1; -+ flash_init(); -+ -+ totalBlks = flash_get_numsectors(); -+ totalSize = flash_get_total_size(); -+ -+ printk("Total Flash size: %dK with %d sectors\n", totalSize/1024, totalBlks); -+ -+ /* nvram is always at the end of flash */ -+ fInfo.flash_nvram_length = FLASH45_LENGTH_NVRAM; -+ fInfo.flash_nvram_start_blk = 0; /* always the first block */ -+ fInfo.flash_nvram_number_blk = 1; /*always fits in the first block */ -+ fInfo.flash_nvram_blk_offset = NVRAM_DATA_OFFSET; -+ -+ // check nvram CRC -+ memcpy((char *)&nvramData, (char *)get_nvram_start_addr(), sizeof(NVRAM_DATA)); -+ savedCrc = nvramData.ulCheckSum; -+ nvramData.ulCheckSum = 0; -+ crc = getCrc32((char *)&nvramData, (UINT32) sizeof(NVRAM_DATA), crc); -+ -+ BpSetBoardId( nvramData.szBoardId ); -+ -+ fInfo.flash_persistent_length = NVRAM_PSI_DEFAULT; -+ if (savedCrc != crc) -+ { -+ printk("***Board is not initialized****: Using the default PSI size: %d\n", -+ fInfo.flash_persistent_length); -+ } -+ else -+ { -+ unsigned long ulPsiSize; -+ if( BpGetPsiSize( &ulPsiSize ) == BP_SUCCESS ) -+ fInfo.flash_persistent_length = ulPsiSize; -+ else -+ { -+ printk("***Board id is not set****: Using the default PSI size: %d\n", -+ fInfo.flash_persistent_length); -+ } -+ } -+ -+ fInfo.flash_persistent_length *= ONEK; -+ startAddr = totalSize - fInfo.flash_persistent_length; -+ fInfo.flash_persistent_start_blk = flash_get_blk(startAddr+FLASH_BASE_ADDR_REG); -+ fInfo.flash_persistent_number_blk = totalBlks - fInfo.flash_persistent_start_blk; -+ // save abs SP address (Scratch Pad). it is before PSI -+ spAddr = startAddr - SP_MAX_LEN ; -+ // find out the offset in the start_blk -+ usedBlkSize = 0; -+ for (i = fInfo.flash_persistent_start_blk; -+ i < (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk); i++) -+ { -+ usedBlkSize += flash_get_sector_size((byte) i); -+ } -+ fInfo.flash_persistent_blk_offset = usedBlkSize - fInfo.flash_persistent_length; -+ -+ // get the info for sp -+ if (!(pTag = kerSysImageTagGet())) -+ { -+ printk("Failed to read image tag from flash\n"); -+ return; -+ } -+ kernelEndAddr = (unsigned long) simple_strtoul(pTag->kernelAddress, NULL, 10) + \ -+ (unsigned long) simple_strtoul(pTag->kernelLen, NULL, 10); -+ -+ // make suer sp does not share kernel block -+ fInfo.flash_scratch_pad_start_blk = flash_get_blk(spAddr+FLASH_BASE_ADDR_REG); -+ if (fInfo.flash_scratch_pad_start_blk != flash_get_blk(kernelEndAddr)) -+ { -+ fInfo.flash_scratch_pad_length = SP_MAX_LEN; -+ if (fInfo.flash_persistent_start_blk == fInfo.flash_scratch_pad_start_blk) // share blk -+ { -+#if 1 /* do not used scratch pad unless it's in its own sector */ -+ printk("Scratch pad is not used for this flash part.\n"); -+ fInfo.flash_scratch_pad_length = 0; // no sp -+#else /* allow scratch pad to share a sector with another section such as PSI */ -+ fInfo.flash_scratch_pad_number_blk = 1; -+ fInfo.flash_scratch_pad_blk_offset = fInfo.flash_persistent_blk_offset - fInfo.flash_scratch_pad_length; -+#endif -+ } -+ else // on different blk -+ { -+ fInfo.flash_scratch_pad_number_blk = fInfo.flash_persistent_start_blk\ -+ - fInfo.flash_scratch_pad_start_blk; -+ // find out the offset in the start_blk -+ usedBlkSize = 0; -+ for (i = fInfo.flash_scratch_pad_start_blk; -+ i < (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk); i++) -+ usedBlkSize += flash_get_sector_size((byte) i); -+ fInfo.flash_scratch_pad_blk_offset = usedBlkSize - fInfo.flash_scratch_pad_length; -+ } -+ } -+ else -+ { -+ printk("No flash for scratch pad!\n"); -+ fInfo.flash_scratch_pad_length = 0; // no sp -+ } -+ -+#if defined(DEBUG_FLASH) -+ printk("fInfo.flash_scratch_pad_start_blk = %d\n", fInfo.flash_scratch_pad_start_blk); -+ printk("fInfo.flash_scratch_pad_number_blk = %d\n", fInfo.flash_scratch_pad_number_blk); -+ printk("fInfo.flash_scratch_pad_length = 0x%x\n", fInfo.flash_scratch_pad_length); -+ printk("fInfo.flash_scratch_pad_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_scratch_pad_blk_offset); -+ -+ printk("fInfo.flash_nvram_start_blk = %d\n", fInfo.flash_nvram_start_blk); -+ printk("fInfo.flash_nvram_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_nvram_blk_offset); -+ printk("fInfo.flash_nvram_number_blk = %d\n", fInfo.flash_nvram_number_blk); -+ -+ printk("psi startAddr = %x\n", startAddr+FLASH_BASE_ADDR_REG); -+ printk("fInfo.flash_persistent_start_blk = %d\n", fInfo.flash_persistent_start_blk); -+ printk("fInfo.flash_persistent_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_persistent_blk_offset); -+ printk("fInfo.flash_persistent_number_blk = %d\n", fInfo.flash_persistent_number_blk); -+#endif -+ -+} -+ -+ -+ -+/*********************************************************************** -+ * Function Name: kerSysFlashAddrInfoGet -+ * Description : Fills in a structure with information about the NVRAM -+ * and persistent storage sections of flash memory. -+ * Fro physmap.c to mount the fs vol. -+ * Returns : None. -+ ***********************************************************************/ -+void kerSysFlashAddrInfoGet(PFLASH_ADDR_INFO pflash_addr_info) -+{ -+ pflash_addr_info->flash_nvram_blk_offset = fInfo.flash_nvram_blk_offset; -+ pflash_addr_info->flash_nvram_length = fInfo.flash_nvram_length; -+ pflash_addr_info->flash_nvram_number_blk = fInfo.flash_nvram_number_blk; -+ pflash_addr_info->flash_nvram_start_blk = fInfo.flash_nvram_start_blk; -+ pflash_addr_info->flash_persistent_blk_offset = fInfo.flash_persistent_blk_offset; -+ pflash_addr_info->flash_persistent_length = fInfo.flash_persistent_length; -+ pflash_addr_info->flash_persistent_number_blk = fInfo.flash_persistent_number_blk; -+ pflash_addr_info->flash_persistent_start_blk = fInfo.flash_persistent_start_blk; -+} -+ -+ -+// get shared blks into *** pTempBuf *** which has to be released bye the caller! -+// return: if pTempBuf != NULL, poits to the data with the dataSize of the buffer -+// !NULL -- ok -+// NULL -- fail -+static char *getSharedBlks(int start_blk, int end_blk) -+{ -+ int i = 0; -+ int usedBlkSize = 0; -+ int sect_size = 0; -+ char *pTempBuf = NULL; -+ char *pBuf = NULL; -+ -+ for (i = start_blk; i < end_blk; i++) -+ usedBlkSize += flash_get_sector_size((byte) i); -+ -+#if defined(DEBUG_FLASH) -+ printk("usedBlkSize = %d\n", usedBlkSize); -+#endif -+ -+ if ((pTempBuf = (char *) retriedKmalloc(usedBlkSize)) == NULL) -+ { -+ printk("failed to allocate memory with size: %d\n", usedBlkSize); -+ return pTempBuf; -+ } -+ -+ pBuf = pTempBuf; -+ for (i = start_blk; i < end_blk; i++) -+ { -+ sect_size = flash_get_sector_size((byte) i); -+ -+#if defined(DEBUG_FLASH) -+ printk("i = %d, sect_size = %d, end_blk = %d\n", i, sect_size, end_blk); -+#endif -+ flash_read_buf((byte)i, 0, pBuf, sect_size); -+ pBuf += sect_size; -+ } -+ -+ return pTempBuf; -+} -+ -+ -+ -+// Set the pTempBuf to flash from start_blk to end_blk -+// return: -+// 0 -- ok -+// -1 -- fail -+static int setSharedBlks(int start_blk, int end_blk, char *pTempBuf) -+{ -+ int i = 0; -+ int sect_size = 0; -+ int sts = 0; -+ char *pBuf = pTempBuf; -+ -+ for (i = start_blk; i < end_blk; i++) -+ { -+ sect_size = flash_get_sector_size((byte) i); -+ flash_sector_erase_int(i); -+ if (flash_write_buf(i, 0, pBuf, sect_size) != sect_size) -+ { -+ printk("Error writing flash sector %d.", i); -+ sts = -1; -+ break; -+ } -+ pBuf += sect_size; -+ } -+ -+ return sts; -+} -+ -+ -+ -+/******************************************************************************* -+ * NVRAM functions -+ *******************************************************************************/ -+ -+// get nvram data -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysNvRamGet(char *string, int strLen, int offset) -+{ -+ char *pBuf = NULL; -+ -+ if (!flashInitialized) -+ kerSysFlashInit(); -+ -+ if (strLen > FLASH45_LENGTH_NVRAM) -+ return -1; -+ -+ if ((pBuf = getSharedBlks(fInfo.flash_nvram_start_blk, -+ (fInfo.flash_nvram_start_blk + fInfo.flash_nvram_number_blk))) == NULL) -+ return -1; -+ -+ // get string off the memory buffer -+ memcpy(string, (pBuf + fInfo.flash_nvram_blk_offset + offset), strLen); -+ -+ retriedKfree(pBuf); -+ -+ return 0; -+} -+ -+ -+// set nvram -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysNvRamSet(char *string, int strLen, int offset) -+{ -+ int sts = 0; -+ char *pBuf = NULL; -+ -+ if (strLen > FLASH45_LENGTH_NVRAM) -+ return -1; -+ -+ if ((pBuf = getSharedBlks(fInfo.flash_nvram_start_blk, -+ (fInfo.flash_nvram_start_blk + fInfo.flash_nvram_number_blk))) == NULL) -+ return -1; -+ -+ // set string to the memory buffer -+ memcpy((pBuf + fInfo.flash_nvram_blk_offset + offset), string, strLen); -+ -+ if (setSharedBlks(fInfo.flash_nvram_start_blk, -+ (fInfo.flash_nvram_number_blk + fInfo.flash_nvram_start_blk), pBuf) != 0) -+ sts = -1; -+ -+ retriedKfree(pBuf); -+ -+ return sts; -+} -+ -+ -+/*********************************************************************** -+ * Function Name: kerSysEraseNvRam -+ * Description : Erase the NVRAM storage section of flash memory. -+ * Returns : 1 -- ok, 0 -- fail -+ ***********************************************************************/ -+int kerSysEraseNvRam(void) -+{ -+ int sts = 1; -+ char *tempStorage = retriedKmalloc(FLASH45_LENGTH_NVRAM); -+ -+ // just write the whole buf with '0xff' to the flash -+ if (!tempStorage) -+ sts = 0; -+ else -+ { -+ memset(tempStorage, 0xff, FLASH45_LENGTH_NVRAM); -+ if (kerSysNvRamSet(tempStorage, FLASH45_LENGTH_NVRAM, 0) != 0) -+ sts = 0; -+ retriedKfree(tempStorage); -+ } -+ -+ return sts; -+} -+ -+ -+/******************************************************************************* -+ * PSI functions -+ *******************************************************************************/ -+// get psi data -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysPersistentGet(char *string, int strLen, int offset) -+{ -+ char *pBuf = NULL; -+ -+ if (strLen > fInfo.flash_persistent_length) -+ return -1; -+ -+ if ((pBuf = getSharedBlks(fInfo.flash_persistent_start_blk, -+ (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk))) == NULL) -+ return -1; -+ -+ // get string off the memory buffer -+ memcpy(string, (pBuf + fInfo.flash_persistent_blk_offset + offset), strLen); -+ -+ retriedKfree(pBuf); -+ -+ return 0; -+} -+ -+ -+// set psi -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysPersistentSet(char *string, int strLen, int offset) -+{ -+ int sts = 0; -+ char *pBuf = NULL; -+ -+ if (strLen > fInfo.flash_persistent_length) -+ return -1; -+ -+ if ((pBuf = getSharedBlks(fInfo.flash_persistent_start_blk, -+ (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk))) == NULL) -+ return -1; -+ -+ // set string to the memory buffer -+ memcpy((pBuf + fInfo.flash_persistent_blk_offset + offset), string, strLen); -+ -+ if (setSharedBlks(fInfo.flash_persistent_start_blk, -+ (fInfo.flash_persistent_number_blk + fInfo.flash_persistent_start_blk), pBuf) != 0) -+ sts = -1; -+ -+ retriedKfree(pBuf); -+ -+ return sts; -+} -+ -+ -+// flash bcm image -+// return: -+// 0 - ok -+// !0 - the sector number fail to be flashed (should not be 0) -+int kerSysBcmImageSet( int flash_start_addr, char *string, int size) -+{ -+ int sts; -+ int sect_size; -+ int blk_start; -+ int i; -+ char *pTempBuf = NULL; -+ int whole_image = 0; -+ -+ blk_start = flash_get_blk(flash_start_addr); -+ if( blk_start < 0 ) -+ return( -1 ); -+ -+ if (flash_start_addr == FLASH_BASE && size > FLASH45_LENGTH_BOOT_ROM) -+ whole_image = 1; -+ -+ /* write image to flash memory */ -+ do -+ { -+ sect_size = flash_get_sector_size(blk_start); -+// NOTE: for memory problem in multiple PVC configuration, temporary get rid of kmalloc this 64K for now. -+// if ((pTempBuf = (char *)retriedKmalloc(sect_size)) == NULL) -+// { -+// printk("Failed to allocate memory with size: %d. Reset the router...\n", sect_size); -+// kerSysMipsSoftReset(); // reset the board right away. -+// } -+ // for whole image, no check on psi -+ if (!whole_image && blk_start == fInfo.flash_persistent_start_blk) // share the blk with psi -+ { -+ if (size > (sect_size - fInfo.flash_persistent_length)) -+ { -+ printk("Image is too big\n"); -+ break; // image is too big. Can not overwrite to nvram -+ } -+ if ((pTempBuf = (char *)retriedKmalloc(sect_size)) == NULL) -+ { -+ printk("Failed to allocate memory with size: %d. Reset the router...\n", sect_size); -+ kerSysMipsSoftReset(); // reset the board right away. -+ } -+ flash_read_buf((byte)blk_start, 0, pTempBuf, sect_size); -+ if (copy_from_user((void *)pTempBuf,(void *)string, size) != 0) -+ break; // failed ? -+ flash_sector_erase_int(blk_start); // erase blk before flash -+ if (flash_write_buf(blk_start, 0, pTempBuf, sect_size) == sect_size) -+ size = 0; // break out and say all is ok -+ retriedKfree(pTempBuf); -+ break; -+ } -+ -+ flash_sector_erase_int(blk_start); // erase blk before flash -+ -+ if (sect_size > size) -+ { -+ if (size & 1) -+ size++; -+ sect_size = size; -+ } -+ -+ if ((i = flash_write_buf(blk_start, 0, string, sect_size)) != sect_size) { -+ break; -+ } -+ blk_start++; -+ string += sect_size; -+ size -= sect_size; -+ } while (size > 0); -+ -+ if (whole_image) -+ { -+ // If flashing a whole image, erase to end of flash. -+ int total_blks = flash_get_numsectors(); -+ while( blk_start < total_blks ) -+ { -+ flash_sector_erase_int(blk_start); -+ blk_start++; -+ } -+ } -+ if (pTempBuf) -+ retriedKfree(pTempBuf); -+ -+ if( size == 0 ) -+ sts = 0; // ok -+ else -+ sts = blk_start; // failed to flash this sector -+ -+ return sts; -+} -+ -+/******************************************************************************* -+ * SP functions -+ *******************************************************************************/ -+// get sp data. NOTE: memcpy work here -- not using copy_from/to_user -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysScratchPadGet(char *tokenId, char *tokBuf, int bufLen) -+{ -+ PSP_HEADER pHead = NULL; -+ PSP_TOKEN pToken = NULL; -+ char *pBuf = NULL; -+ char *pShareBuf = NULL; -+ char *startPtr = NULL; -+ char *endPtr = NULL; -+ char *spEndPtr = NULL; -+ int sts = -1; -+ -+ if (fInfo.flash_scratch_pad_length == 0) -+ return sts; -+ -+ if (bufLen >= (fInfo.flash_scratch_pad_length - sizeof(SP_HEADER) - sizeof(SP_TOKEN))) -+ { -+ printk("Exceed scratch pad space by %d\n", bufLen - fInfo.flash_scratch_pad_length \ -+ - sizeof(SP_HEADER) - sizeof(SP_TOKEN)); -+ return sts; -+ } -+ -+ if ((pShareBuf = getSharedBlks(fInfo.flash_scratch_pad_start_blk, -+ (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk))) == NULL) -+ return sts; -+ -+ // pBuf points to SP buf -+ pBuf = pShareBuf + fInfo.flash_scratch_pad_blk_offset; -+ -+ pHead = (PSP_HEADER) pBuf; -+ if (memcmp(pHead->SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN) != 0) -+ { -+ printk("Scrap pad is not initialized.\n"); -+ return sts; -+ } -+ -+ // search up to SPUsedLen for the token -+ startPtr = pBuf + sizeof(SP_HEADER); -+ endPtr = pBuf + pHead->SPUsedLen; -+ spEndPtr = pBuf + SP_MAX_LEN; -+ while (startPtr < endPtr && startPtr < spEndPtr) -+ { -+ pToken = (PSP_TOKEN) startPtr; -+ if (strncmp(pToken->tokenName, tokenId, TOKEN_NAME_LEN) == 0) -+ { -+ memcpy(tokBuf, startPtr + sizeof(SP_TOKEN), bufLen); -+ sts = 0; -+ break; -+ } -+ // get next token -+ startPtr += sizeof(SP_TOKEN) + pToken->tokenLen; -+ } -+ -+ retriedKfree(pShareBuf); -+ -+ return sts; -+} -+ -+ -+// set sp. NOTE: memcpy work here -- not using copy_from/to_user -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysScratchPadSet(char *tokenId, char *tokBuf, int bufLen) -+{ -+ PSP_TOKEN pToken = NULL; -+ PSP_HEADER pHead = NULL; -+ char *pShareBuf = NULL; -+ char *pBuf = NULL; -+ SP_HEADER SPHead; -+ SP_TOKEN SPToken; -+ char *curPtr; -+ int sts = -1; -+ -+ if (fInfo.flash_scratch_pad_length == 0) -+ return sts; -+ -+ if (bufLen >= (fInfo.flash_scratch_pad_length - sizeof(SP_HEADER) - sizeof(SP_TOKEN))) -+ { -+ printk("Exceed scratch pad space by %d\n", bufLen - fInfo.flash_scratch_pad_length \ -+ - sizeof(SP_HEADER) - sizeof(SP_TOKEN)); -+ return sts; -+ } -+ -+ if ((pShareBuf = getSharedBlks(fInfo.flash_scratch_pad_start_blk, -+ (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk))) == NULL) -+ return sts; -+ -+ // pBuf points to SP buf -+ pBuf = pShareBuf + fInfo.flash_scratch_pad_blk_offset; -+ pHead = (PSP_HEADER) pBuf; -+ -+ // form header info. SPUsedLen later on... -+ memset((char *)&SPHead, 0, sizeof(SP_HEADER)); -+ memcpy(SPHead.SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN); -+ SPHead.SPVersion = SP_VERSION; -+ -+ // form token info. -+ memset((char*)&SPToken, 0, sizeof(SP_TOKEN)); -+ strncpy(SPToken.tokenName, tokenId, TOKEN_NAME_LEN - 1); -+ SPToken.tokenLen = bufLen; -+ if (memcmp(pHead->SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN) != 0) -+ { -+ // new sp, so just flash the token -+ printk("No Scrap pad found. Initialize scratch pad...\n"); -+ SPHead.SPUsedLen = sizeof(SP_HEADER) + sizeof(SP_TOKEN) + bufLen; -+ memcpy(pBuf, (char *)&SPHead, sizeof(SP_HEADER)); -+ curPtr = pBuf + sizeof(SP_HEADER); -+ memcpy(curPtr, (char *)&SPToken, sizeof(SP_TOKEN)); -+ curPtr += sizeof(SP_TOKEN); -+ memcpy(curPtr, tokBuf, bufLen); -+ } -+ else -+ { -+ // need search for the token, if exist with same size overwrite it. if sizes differ, -+ // move over the later token data over and put the new one at the end -+ char *endPtr = pBuf + pHead->SPUsedLen; -+ char *spEndPtr = pBuf + SP_MAX_LEN; -+ curPtr = pBuf + sizeof(SP_HEADER); -+ while (curPtr < endPtr && curPtr < spEndPtr) -+ { -+ pToken = (PSP_TOKEN) curPtr; -+ if (strncmp(pToken->tokenName, tokenId, TOKEN_NAME_LEN) == 0) -+ { -+ if (pToken->tokenLen == bufLen) // overwirte it -+ { -+ memcpy((curPtr+sizeof(SP_TOKEN)), tokBuf, bufLen); -+ break; -+ } -+ else // move later data over and put the new token at the end -+ { -+ memcpy((curPtr+sizeof(SP_TOKEN)), tokBuf, bufLen); // ~~~ -+ break; -+ } -+ } -+ else // not same token ~~~ -+ { -+ } -+ // get next token -+ curPtr += sizeof(SP_TOKEN) + pToken->tokenLen; -+ } // end while -+ SPHead.SPUsedLen = sizeof(SP_HEADER) + sizeof(SP_TOKEN) + bufLen; // ~~~ -+ if (SPHead.SPUsedLen > SP_MAX_LEN) -+ { -+ printk("No more Scratch pad space left! Over limit by %d bytes\n", SPHead.SPUsedLen - SP_MAX_LEN); -+ return sts; -+ } -+ -+ } // else if not new sp -+ -+ sts = setSharedBlks(fInfo.flash_scratch_pad_start_blk, -+ (fInfo.flash_scratch_pad_number_blk + fInfo.flash_scratch_pad_start_blk), pShareBuf); -+ -+ retriedKfree(pShareBuf); -+ -+ return sts; -+ -+ -+} -+ -+int kerSysFlashSizeGet(void) -+{ -+ return flash_get_total_size(); -+} -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/bcm63xx_led.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/bcm63xx_led.c ---- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/bcm63xx_led.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/bcm63xx_led.c 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,582 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/*************************************************************************** -+ * File Name : bcm63xx_led.c -+ * -+ * Description: -+ * -+ * This file contains bcm963xx board led control API functions. -+ * -+ * To use it, do the following -+ * -+ * 1). define in the board.c the following led mappping (this is for 6345GW board): -+ * const LED_MAP_PAIR cLedMapping45GW[] = -+ * { // led name Initial state physical pin (ledMask) -+ * {kLedUsb, kLedStateOff, GPIO_LED_PIN_7}, -+ * {kLedAdsl, kLedStateOff, GPIO_LED_PIN_8}, -+ * {kLedPPP, kLedStateOff, GPIO_LED_PIN_9}, // PPP and WanData share PIN_9 -+ * {kLedWanData, kLedStateOff, GPIO_LED_PIN_9}, -+ * {kLedWireless, kLedStateOff, GPIO_LED_PIN_10}, -+ * {kLedEnd, kLedStateOff, 0 } // NOTE: kLedEnd has to be at the end. -+ * -+ * 2). };To initialize led API and initial state of the leds, call the following function with the mapping -+ * pointer from the above struct -+ * -+ * boardLedInit((PLED_MAP_PAIR) &cLedMapping45R); -+ * -+ * 3). Sample call for kernel mode: -+ * -+ * kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board.h -+ * -+ * 4). Sample call for user mode -+ * -+ * sysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board_api.h -+ * -+ * -+ * Created on : 10/28/2002 seanl -+ * -+ ***************************************************************************/ -+ -+/* Includes. */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#define k100ms (HZ / 10) // ~100 ms -+#define kFastBlinkCount 0 // ~100ms -+#define kSlowBlinkCount 5 // ~600ms -+ -+#define MAX_VIRT_LEDS 12 -+ -+// uncomment // for debug led -+//#define DEBUG_LED -+ -+// global variables: -+struct timer_list gLedTimer; -+int gTimerOn = FALSE; -+int gLedCount = 0; -+ -+typedef struct ledinfo -+{ -+ unsigned short ledMask; // mask for led: ie. giop 10 = 0x0400 -+ unsigned short ledActiveLow; // GPIO bit reset to turn on LED -+ unsigned short ledMaskFail; // mask for led: ie. giop 10 = 0x0400 -+ unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED -+ BOARD_LED_STATE ledState; // current led state -+ BOARD_LED_STATE savedLedState; // used in blink once for restore to the orignal ledState -+ int blinkCountDown; // if == 0, do blink (toggle). Is assgined value and dec by 1 at each timer. -+} LED_INFO, *PLED_INFO; -+ -+static PLED_INFO gLed = NULL; -+static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS]; -+static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS]; -+static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS]; -+ -+#if 0 /* BROKEN */ -+#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) -+static int gLedOffInBridgeMode = 1; -+#elif defined(CONFIG_BCM96345) -+static int gLedOffInBridgeMode = 0; -+#endif -+#endif -+ -+void ledTimerExpire(void); -+int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ); -+ -+//************************************************************************************** -+// LED operations -+//************************************************************************************** -+ -+// turn led on and set the ledState -+void ledOn(PLED_INFO pLed) -+{ -+ if( pLed->ledMask ) -+ { -+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one -+ if( pLed->ledActiveLow ) -+ GPIO->GPIOio &= ~pLed->ledMask; // turn on the led -+ else -+ GPIO->GPIOio |= pLed->ledMask; // turn on the led -+ pLed->ledState = pLed->savedLedState = kLedStateOn; -+ } -+} -+ -+ -+// turn led off and set the ledState -+void ledOff(PLED_INFO pLed) -+{ -+ if( pLed->ledMask ) -+ { -+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one -+ if( pLed->ledActiveLow ) -+ GPIO->GPIOio |= pLed->ledMask; // turn off the led -+ else -+ GPIO->GPIOio &= ~pLed->ledMask; // turn off the led -+ pLed->ledState = pLed->savedLedState = kLedStateOff; -+ } -+} -+ -+// turn led on and set the ledState -+void ledOnFail(PLED_INFO pLed) -+{ -+ if( pLed->ledMaskFail ) -+ { -+ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one -+ if( pLed->ledActiveLowFail ) -+ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn on the led -+ else -+ GPIO->GPIOio |= pLed->ledMaskFail; // turn on the led -+ pLed->ledState = pLed->savedLedState = kLedStateFail; -+ } -+} -+ -+ -+// turn led off and set the ledState -+void ledOffFail(PLED_INFO pLed) -+{ -+ if( pLed->ledMaskFail ) -+ { -+ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one -+ if( pLed->ledActiveLowFail ) -+ GPIO->GPIOio |= pLed->ledMaskFail; // turn off the led -+ else -+ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn off the led -+ pLed->ledState = pLed->savedLedState = kLedStateOff; -+ } -+} -+ -+ -+// toggle the led and return the current ledState -+BOARD_LED_STATE ledToggle(PLED_INFO pLed) -+{ -+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one -+ if (GPIO->GPIOio & pLed->ledMask) -+ { -+ GPIO->GPIOio &= ~(pLed->ledMask); -+ return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff ); -+ } -+ else -+ { -+ GPIO->GPIOio |= pLed->ledMask; -+ return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn ); -+ } -+} -+ -+ -+// led timer. Will return if timer is already on -+void ledTimerStart(void) -+{ -+ if (gTimerOn) -+ return; -+ -+#if defined(DEBUG_LED) -+ printk("led: add_timer\n"); -+#endif -+ -+ init_timer(&gLedTimer); -+ gLedTimer.function = (void*)ledTimerExpire; -+ gLedTimer.expires = jiffies + k100ms; // timer expires in ~100ms -+ add_timer (&gLedTimer); -+ gTimerOn = TRUE; -+} -+ -+ -+// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and -+// restart the timer according to ledState -+void ledTimerExpire(void) -+{ -+ int i; -+ PLED_INFO pCurLed; -+ -+ gTimerOn = FALSE; -+ -+ for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++) -+ { -+#if defined(DEBUG_LED) -+ printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown); -+#endif -+ switch (pCurLed->ledState) -+ { -+ case kLedStateOn: -+ case kLedStateOff: -+ case kLedStateFail: -+ pCurLed->blinkCountDown = 0; // reset the blink count down -+ break; -+ -+ case kLedStateBlinkOnce: -+ ledToggle(pCurLed); -+ pCurLed->blinkCountDown = 0; // reset to 0 -+ pCurLed->ledState = pCurLed->savedLedState; -+ if (pCurLed->ledState == kLedStateSlowBlinkContinues || -+ pCurLed->ledState == kLedStateFastBlinkContinues) -+ ledTimerStart(); // start timer if in blinkContinues stats -+ break; -+ -+ case kLedStateSlowBlinkContinues: -+ if (pCurLed->blinkCountDown-- == 0) -+ { -+ pCurLed->blinkCountDown = kSlowBlinkCount; -+ ledToggle(pCurLed); -+ } -+ ledTimerStart(); -+ break; -+ -+ case kLedStateFastBlinkContinues: -+ if (pCurLed->blinkCountDown-- == 0) -+ { -+ pCurLed->blinkCountDown = kFastBlinkCount; -+ ledToggle(pCurLed); -+ } -+ ledTimerStart(); -+ break; -+ -+ default: -+ printk("Invalid state = %d\n", pCurLed->ledState); -+ } -+ } -+} -+ -+// initialize the gLedCount and allocate and fill gLed struct -+void __init boardLedInit(PLED_MAP_PAIR cLedMapping) -+{ -+ PLED_MAP_PAIR p1, p2; -+ PLED_INFO pCurLed; -+ int needTimer = FALSE; -+ int alreadyUsed = 0; -+ -+#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) -+ /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */ -+ GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK; -+ GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS; -+#endif -+ -+ memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) ); -+ memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) ); -+ memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) ); -+ -+ gLedCount = 0; -+ -+ // Check for multiple LED names and multiple LED GPIO pins that share the -+ // same physical board LED. -+ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) -+ { -+ alreadyUsed = 0; -+ for( p2 = cLedMapping; p2 != p1; p2++ ) -+ { -+ if( (p1->ledMask && p1->ledMask == p2->ledMask) || -+ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) -+ { -+ alreadyUsed = 1; -+ break; -+ } -+ } -+ -+ if( alreadyUsed == 0 ) -+ gLedCount++; -+ } -+ -+ gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL); -+ if( gLed == NULL ) -+ { -+ printk( "LED memory allocation error.\n" ); -+ return; -+ } -+ -+ memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) ); -+ -+ // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led -+ // (ledMask) the first defined led's ledInitState will be used. -+ pCurLed = gLed; -+ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) -+ { -+ if( (int) p1->ledName > MAX_VIRT_LEDS ) -+ continue; -+ -+ alreadyUsed = 0; -+ for( p2 = cLedMapping; p2 != p1; p2++ ) -+ { -+ if( (p1->ledMask && p1->ledMask == p2->ledMask) || -+ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) -+ { -+ alreadyUsed = 1; -+ break; -+ } -+ } -+ -+ if( alreadyUsed == 0 ) -+ { -+ // Initialize the board LED for the first time. -+ needTimer = initLedInfo( p1, pCurLed ); -+ gpVirtLeds[(int) p1->ledName] = pCurLed; -+ pCurLed++; -+ } -+ else -+ { -+ PLED_INFO pLed; -+ for( pLed = gLed; pLed != pCurLed; pLed++ ) -+ { -+ // Find the LED_INFO structure that has already been initialized. -+ if((pLed->ledMask && pLed->ledMask == p1->ledMask) || -+ (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail)) -+ { -+ // The board LED has already been initialized but possibly -+ // not completely initialized. -+ if( p1->ledMask ) -+ { -+ pLed->ledMask = p1->ledMask; -+ pLed->ledActiveLow = p1->ledActiveLow; -+ } -+ if( p1->ledMaskFail ) -+ { -+ pLed->ledMaskFail = p1->ledMaskFail; -+ pLed->ledActiveLowFail = p1->ledActiveLowFail; -+ } -+ gpVirtLeds[(int) p1->ledName] = pLed; -+ break; -+ } -+ } -+ } -+ } -+ -+ if (needTimer) -+ ledTimerStart(); -+ -+#if defined(DEBUG_LED) -+ int i; -+ for (i=0; i < gLedCount; i++) -+ printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState); -+#endif -+ -+} -+ -+// Initialize a structure that contains information about a physical board LED -+// control. The board LED may contain more than one GPIO pin to control a -+// normal condition (green) or a failure condition (red). -+int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ) -+{ -+ int needTimer = FALSE; -+ pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState; -+ pCurLed->ledMask = pCurMap->ledMask; -+ pCurLed->ledActiveLow = pCurMap->ledActiveLow; -+ pCurLed->ledMaskFail = pCurMap->ledMaskFail; -+ pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail; -+ -+ switch (pCurLed->ledState) -+ { -+ case kLedStateOn: -+ pCurLed->blinkCountDown = 0; // reset the blink count down -+ ledOn(pCurLed); -+ break; -+ case kLedStateOff: -+ pCurLed->blinkCountDown = 0; // reset the blink count down -+ ledOff(pCurLed); -+ break; -+ case kLedStateFail: -+ pCurLed->blinkCountDown = 0; // reset the blink count down -+ ledOnFail(pCurLed); -+ break; -+ case kLedStateBlinkOnce: -+ pCurLed->blinkCountDown = 1; -+ needTimer = TRUE; -+ break; -+ case kLedStateSlowBlinkContinues: -+ pCurLed->blinkCountDown = kSlowBlinkCount; -+ needTimer = TRUE; -+ break; -+ case kLedStateFastBlinkContinues: -+ pCurLed->blinkCountDown = kFastBlinkCount; -+ needTimer = TRUE; -+ break; -+ default: -+ printk("Invalid state = %d\n", pCurLed->ledState); -+ } -+ -+ return( needTimer ); -+} -+ -+#if 0 /* BROKEN */ -+// Determines if there is at least one interface in bridge mode. Bridge mode -+// is determined by the cfm convention of naming bridge interfaces nas17 -+// through nas24. -+static int isBridgedProtocol(void) -+{ -+ extern int dev_get(const char *name); -+ const int firstBridgeId = 17; -+ const int lastBridgeId = 24; -+ int i; -+ int ret = FALSE; -+ char name[16]; -+ -+ for( i = firstBridgeId; i <= lastBridgeId; i++ ) -+ { -+ sprintf( name, "nas%d", i ); -+ -+ if( dev_get(name) ) -+ { -+ ret = TRUE; -+ break; -+ } -+ } -+ -+ return(ret); -+} -+#endif -+ -+// led ctrl. Maps the ledName to the corresponding ledInfoPtr and perform the led operation -+void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) -+{ -+ PLED_INFO ledInfoPtr; -+ -+ // do the mapping from virtual to physical led -+ if( (int) ledName < MAX_VIRT_LEDS ) -+ ledInfoPtr = gpVirtLeds[(int) ledName]; -+ else -+ ledInfoPtr = NULL; -+ -+ if (ledInfoPtr == NULL) -+ return; -+ -+ if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] ) -+ { -+ (*gLedHwFunc[(int) ledName]) (ledName, ledState); -+ ledOffFail(ledInfoPtr); -+ return; -+ } -+ else -+ if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] ) -+ { -+ (*gLedHwFailFunc[(int) ledName]) (ledName, ledState); -+ ledOff(ledInfoPtr); -+ return; -+ } -+ -+#if 0 /* BROKEN */ -+ // Do not blink the WAN Data LED if at least one interface is in bridge mode. -+ if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP)) -+ { -+ static int BridgedProtocol = -1; -+ -+ if( BridgedProtocol == -1 ) -+ BridgedProtocol = isBridgedProtocol(); -+ -+ if( BridgedProtocol == TRUE ) -+ return; -+ } -+#endif -+ -+ // If the state is kLedStateFail and there is not a failure LED defined -+ // in the board parameters, change the state to kLedStateFastBlinkContinues. -+ if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 ) -+ ledState = kLedStateFastBlinkContinues; -+ -+ switch (ledState) -+ { -+ case kLedStateOn: -+ // First, turn off the complimentary (failure) LED GPIO. -+ if( ledInfoPtr->ledMaskFail ) -+ ledOffFail(ledInfoPtr); -+ else -+ if( gLedHwFailFunc[(int) ledName] ) -+ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); -+ -+ // Next, turn on the specified LED GPIO. -+ ledOn(ledInfoPtr); -+ break; -+ -+ case kLedStateOff: -+ // First, turn off the complimentary (failure) LED GPIO. -+ if( ledInfoPtr->ledMaskFail ) -+ ledOffFail(ledInfoPtr); -+ else -+ if( gLedHwFailFunc[(int) ledName] ) -+ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); -+ -+ // Next, turn off the specified LED GPIO. -+ ledOff(ledInfoPtr); -+ break; -+ -+ case kLedStateFail: -+ // First, turn off the complimentary (normal) LED GPIO. -+ if( ledInfoPtr->ledMask ) -+ ledOff(ledInfoPtr); -+ else -+ if( gLedHwFunc[(int) ledName] ) -+ (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff); -+ -+ // Next, turn on (red) the specified LED GPIO. -+ ledOnFail(ledInfoPtr); -+ break; -+ -+ case kLedStateBlinkOnce: -+ // skip blinkOnce if it is already in Slow/Fast blink continues state -+ if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues || -+ ledInfoPtr->savedLedState == kLedStateFastBlinkContinues) -+ ; -+ else -+ { -+ if (ledInfoPtr->blinkCountDown == 0) // skip the call if it is 1 -+ { -+ ledToggle(ledInfoPtr); -+ ledInfoPtr->blinkCountDown = 1; // it will be reset to 0 when timer expires -+ ledInfoPtr->ledState = kLedStateBlinkOnce; -+ ledTimerStart(); -+ } -+ } -+ break; -+ -+ case kLedStateSlowBlinkContinues: -+ ledInfoPtr->blinkCountDown = kSlowBlinkCount; -+ ledInfoPtr->ledState = kLedStateSlowBlinkContinues; -+ ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues; -+ ledTimerStart(); -+ break; -+ -+ case kLedStateFastBlinkContinues: -+ ledInfoPtr->blinkCountDown = kFastBlinkCount; -+ ledInfoPtr->ledState = kLedStateFastBlinkContinues; -+ ledInfoPtr->savedLedState = kLedStateFastBlinkContinues; -+ ledTimerStart(); -+ break; -+ -+ default: -+ printk("Invalid led state\n"); -+ } -+} -+ -+// This function is called for an LED that is controlled by hardware. -+void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName, -+ HANDLE_LED_FUNC ledHwFunc, int ledFailType ) -+{ -+ if( (int) ledName < MAX_VIRT_LEDS ) -+ { -+ if( ledFailType == 1 ) -+ gLedHwFailFunc[(int) ledName] = ledHwFunc; -+ else -+ gLedHwFunc[(int) ledName] = ledHwFunc; -+ } -+} -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/board.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/board.c ---- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/board.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/board.c 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,1570 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/*************************************************************************** -+ * File Name : board.c -+ * -+ * Description: This file contains Linux character device driver entry -+ * for the board related ioctl calls: flash, get free kernel -+ * page and dump kernel memory, etc. -+ * -+ * Created on : 2/20/2002 seanl: use cfiflash.c, cfliflash.h (AMD specific) -+ * -+ ***************************************************************************/ -+ -+ -+/* Includes. */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include "boardparms.h" -+#include "cfiflash.h" -+#include "bcm_intr.h" -+#include "board.h" -+#include "bcm_map_part.h" -+ -+/* Typedefs. */ -+#if defined (NON_CONSECUTIVE_MAC) -+// used to be the last octet. Now changed to the first 5 bits of the the forth octet -+// to reduced the duplicated MAC addresses. -+#define CHANGED_OCTET 3 -+#define SHIFT_BITS 3 -+#else -+#define CHANGED_OCTET 1 -+#define SHIFT_BITS 0 -+#endif -+ -+#if defined (WIRELESS) -+#define SES_BTN_PRESSED 0x00000001 -+#define SES_EVENTS SES_BTN_PRESSED /*OR all values if any*/ -+#define SES_LED_OFF 0 -+#define SES_LED_ON 1 -+#define SES_LED_BLINK 2 -+#endif -+ -+typedef struct -+{ -+ unsigned long ulId; -+ char chInUse; -+ char chReserved[3]; -+} MAC_ADDR_INFO, *PMAC_ADDR_INFO; -+ -+typedef struct -+{ -+ unsigned long ulSdramSize; -+ unsigned long ulPsiSize; -+ unsigned long ulNumMacAddrs; -+ unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; -+ MAC_ADDR_INFO MacAddrs[1]; -+} NVRAM_INFO, *PNVRAM_INFO; -+ -+typedef struct -+{ -+ unsigned long eventmask; -+} BOARD_IOC, *PBOARD_IOC; -+ -+ -+/*Dyinggasp callback*/ -+typedef void (*cb_dgasp_t)(void *arg); -+typedef struct _CB_DGASP__LIST -+{ -+ struct list_head list; -+ char name[IFNAMSIZ]; -+ cb_dgasp_t cb_dgasp_fn; -+ void *context; -+}CB_DGASP_LIST , *PCB_DGASP_LIST; -+ -+ -+static LED_MAP_PAIR LedMapping[] = -+{ // led name Initial state physical pin (ledMask) -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0} // NOTE: kLedEnd has to be at the end. -+}; -+ -+/* Externs. */ -+extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed); -+extern unsigned int nr_free_pages (void); -+extern const char *get_system_type(void); -+extern void kerSysFlashInit(void); -+extern unsigned long get_nvram_start_addr(void); -+extern unsigned long get_scratch_pad_start_addr(void); -+extern unsigned long getMemorySize(void); -+extern void __init boardLedInit(PLED_MAP_PAIR); -+extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); -+extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName, -+ HANDLE_LED_FUNC ledHwFunc, int ledFailType ); -+ -+/* Prototypes. */ -+void __init InitNvramInfo( void ); -+static int board_open( struct inode *inode, struct file *filp ); -+static int board_ioctl( struct inode *inode, struct file *flip, unsigned int command, unsigned long arg ); -+static ssize_t board_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos); -+static unsigned int board_poll(struct file *filp, struct poll_table_struct *wait); -+static int board_release(struct inode *inode, struct file *filp); -+ -+static BOARD_IOC* borad_ioc_alloc(void); -+static void borad_ioc_free(BOARD_IOC* board_ioc); -+ -+/* DyingGasp function prototype */ -+static void __init kerSysDyingGaspMapIntr(void); -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) -+static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs); -+#else -+static unsigned int kerSysDyingGaspIsr(void); -+#endif -+static void __init kerSysInitDyingGaspHandler( void ); -+static void __exit kerSysDeinitDyingGaspHandler( void ); -+/* -DyingGasp function prototype - */ -+ -+ -+#if defined (WIRELESS) -+static irqreturn_t sesBtn_isr(int irq, void *dev_id, struct pt_regs *ptregs); -+static void __init sesBtn_mapGpio(void); -+static void __init sesBtn_mapIntr(int context); -+static unsigned int sesBtn_poll(struct file *file, struct poll_table_struct *wait); -+static ssize_t sesBtn_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos); -+static void __init sesLed_mapGpio(void); -+static void sesLed_ctrl(int action); -+static void __init ses_board_init(void); -+static void __exit ses_board_deinit(void); -+#endif -+ -+static PNVRAM_INFO g_pNvramInfo = NULL; -+static int g_ledInitialized = 0; -+static wait_queue_head_t g_board_wait_queue; -+static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL; -+ -+static int g_wakeup_monitor = 0; -+static struct file *g_monitor_file = NULL; -+static struct task_struct *g_monitor_task = NULL; -+static unsigned int (*g_orig_fop_poll) -+ (struct file *, struct poll_table_struct *) = NULL; -+ -+static struct file_operations board_fops = -+{ -+ open: board_open, -+ ioctl: board_ioctl, -+ poll: board_poll, -+ read: board_read, -+ release: board_release, -+}; -+ -+uint32 board_major = 0; -+ -+#if defined (WIRELESS) -+static unsigned short sesBtn_irq = BP_NOT_DEFINED; -+static unsigned short sesBtn_gpio = BP_NOT_DEFINED; -+static unsigned short sesLed_gpio = BP_NOT_DEFINED; -+#endif -+ -+#if defined(MODULE) -+int init_module(void) -+{ -+ return( brcm_board_init() ); -+} -+ -+void cleanup_module(void) -+{ -+ if (MOD_IN_USE) -+ printk("brcm flash: cleanup_module failed because module is in use\n"); -+ else -+ brcm_board_cleanup(); -+} -+#endif //MODULE -+ -+ -+ -+static int __init brcm_board_init( void ) -+{ -+ typedef int (*BP_LED_FUNC) (unsigned short *); -+ static struct BpLedInformation -+ { -+ BOARD_LED_NAME ledName; -+ BP_LED_FUNC bpFunc; -+ BP_LED_FUNC bpFuncFail; -+ } bpLedInfo[] = -+ {{kLedAdsl, BpGetAdslLedGpio, BpGetAdslFailLedGpio}, -+ {kLedWireless, BpGetWirelessLedGpio, NULL}, -+ {kLedUsb, BpGetUsbLedGpio, NULL}, -+ {kLedHpna, BpGetHpnaLedGpio, NULL}, -+ {kLedWanData, BpGetWanDataLedGpio, NULL}, -+ {kLedPPP, BpGetPppLedGpio, BpGetPppFailLedGpio}, -+ {kLedVoip, BpGetVoipLedGpio, NULL}, -+ {kLedSes, BpGetWirelessSesLedGpio, NULL}, -+ {kLedEnd, NULL, NULL} -+ }; -+ -+ int ret; -+ -+ ret = register_chrdev(BOARD_DRV_MAJOR, "bcrmboard", &board_fops ); -+ if (ret < 0) -+ printk( "brcm_board_init(major %d): fail to register device.\n",BOARD_DRV_MAJOR); -+ else -+ { -+ PLED_MAP_PAIR pLedMap = LedMapping; -+ unsigned short gpio; -+ struct BpLedInformation *pInfo; -+ -+ printk("brcmboard: brcm_board_init entry\n"); -+ board_major = BOARD_DRV_MAJOR; -+ InitNvramInfo(); -+ -+ for( pInfo = bpLedInfo; pInfo->ledName != kLedEnd; pInfo++ ) -+ { -+ if( pInfo->bpFunc && (*pInfo->bpFunc) (&gpio) == BP_SUCCESS ) -+ { -+ pLedMap->ledName = pInfo->ledName; -+ pLedMap->ledMask = GPIO_NUM_TO_MASK(gpio); -+ pLedMap->ledActiveLow = (gpio & BP_ACTIVE_LOW) ? 1 : 0; -+ } -+ if( pInfo->bpFuncFail && (*pInfo->bpFuncFail) (&gpio) == BP_SUCCESS ) -+ { -+ pLedMap->ledName = pInfo->ledName; -+ pLedMap->ledMaskFail = GPIO_NUM_TO_MASK(gpio); -+ pLedMap->ledActiveLowFail = (gpio & BP_ACTIVE_LOW) ? 1 : 0; -+ } -+ if( pLedMap->ledName != kLedEnd ) -+ pLedMap++; -+ } -+ -+ init_waitqueue_head(&g_board_wait_queue); -+#if defined (WIRELESS) -+ ses_board_init(); -+#endif -+ kerSysInitDyingGaspHandler(); -+ kerSysDyingGaspMapIntr(); -+ -+ boardLedInit(LedMapping); -+ g_ledInitialized = 1; -+ } -+ -+ return ret; -+} -+ -+void __init InitNvramInfo( void ) -+{ -+ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); -+ unsigned long ulNumMacAddrs = pNvramData->ulNumMacAddrs; -+ -+ if( ulNumMacAddrs > 0 && ulNumMacAddrs <= NVRAM_MAC_COUNT_MAX ) -+ { -+ unsigned long ulNvramInfoSize = -+ sizeof(NVRAM_INFO) + ((sizeof(MAC_ADDR_INFO) - 1) * ulNumMacAddrs); -+ -+ g_pNvramInfo = (PNVRAM_INFO) kmalloc( ulNvramInfoSize, GFP_KERNEL ); -+ -+ if( g_pNvramInfo ) -+ { -+ unsigned long ulPsiSize; -+ if( BpGetPsiSize( &ulPsiSize ) != BP_SUCCESS ) -+ ulPsiSize = NVRAM_PSI_DEFAULT; -+ memset( g_pNvramInfo, 0x00, ulNvramInfoSize ); -+ g_pNvramInfo->ulPsiSize = ulPsiSize * 1024; -+ g_pNvramInfo->ulNumMacAddrs = pNvramData->ulNumMacAddrs; -+ memcpy( g_pNvramInfo->ucaBaseMacAddr, pNvramData->ucaBaseMacAddr, -+ NVRAM_MAC_ADDRESS_LEN ); -+ g_pNvramInfo->ulSdramSize = getMemorySize(); -+ } -+ else -+ printk("ERROR - Could not allocate memory for NVRAM data\n"); -+ } -+ else -+ printk("ERROR - Invalid number of MAC addresses (%ld) is configured.\n", -+ ulNumMacAddrs); -+} -+ -+void __exit brcm_board_cleanup( void ) -+{ -+ printk("brcm_board_cleanup()\n"); -+ -+ if (board_major != -1) -+ { -+#if defined (WIRELESS) -+ ses_board_deinit(); -+#endif -+ kerSysDeinitDyingGaspHandler(); -+ unregister_chrdev(board_major, "board_ioctl"); -+ } -+} -+ -+static BOARD_IOC* borad_ioc_alloc(void) -+{ -+ BOARD_IOC *board_ioc =NULL; -+ board_ioc = (BOARD_IOC*) kmalloc( sizeof(BOARD_IOC) , GFP_KERNEL ); -+ if(board_ioc) -+ { -+ memset(board_ioc, 0, sizeof(BOARD_IOC)); -+ } -+ return board_ioc; -+} -+ -+static void borad_ioc_free(BOARD_IOC* board_ioc) -+{ -+ if(board_ioc) -+ { -+ kfree(board_ioc); -+ } -+} -+ -+ -+static int board_open( struct inode *inode, struct file *filp ) -+{ -+ filp->private_data = borad_ioc_alloc(); -+ -+ if (filp->private_data == NULL) -+ return -ENOMEM; -+ -+ return( 0 ); -+} -+ -+static int board_release(struct inode *inode, struct file *filp) -+{ -+ BOARD_IOC *board_ioc = filp->private_data; -+ -+ wait_event_interruptible(g_board_wait_queue, 1); -+ borad_ioc_free(board_ioc); -+ -+ return( 0 ); -+} -+ -+ -+static unsigned int board_poll(struct file *filp, struct poll_table_struct *wait) -+{ -+ unsigned int mask = 0; -+#if defined (WIRELESS) -+ BOARD_IOC *board_ioc = filp->private_data; -+#endif -+ -+ poll_wait(filp, &g_board_wait_queue, wait); -+#if defined (WIRELESS) -+ if(board_ioc->eventmask & SES_EVENTS){ -+ mask |= sesBtn_poll(filp, wait); -+ } -+#endif -+ -+ return mask; -+} -+ -+ -+static ssize_t board_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos) -+{ -+#if defined (WIRELESS) -+ BOARD_IOC *board_ioc = filp->private_data; -+ if(board_ioc->eventmask & SES_EVENTS){ -+ return sesBtn_read(filp, buffer, count, ppos); -+ } -+#endif -+ return 0; -+} -+ -+//************************************************************************************** -+// Utitlities for dump memory, free kernel pages, mips soft reset, etc. -+//************************************************************************************** -+ -+/*********************************************************************** -+ * Function Name: dumpaddr -+ * Description : Display a hex dump of the specified address. -+ ***********************************************************************/ -+void dumpaddr( unsigned char *pAddr, int nLen ) -+{ -+ static char szHexChars[] = "0123456789abcdef"; -+ char szLine[80]; -+ char *p = szLine; -+ unsigned char ch, *q; -+ int i, j; -+ unsigned long ul; -+ -+ while( nLen > 0 ) -+ { -+ sprintf( szLine, "%8.8lx: ", (unsigned long) pAddr ); -+ p = szLine + strlen(szLine); -+ -+ for(i = 0; i < 16 && nLen > 0; i += sizeof(long), nLen -= sizeof(long)) -+ { -+ ul = *(unsigned long *) &pAddr[i]; -+ q = (unsigned char *) &ul; -+ for( j = 0; j < sizeof(long); j++ ) -+ { -+ *p++ = szHexChars[q[j] >> 4]; -+ *p++ = szHexChars[q[j] & 0x0f]; -+ *p++ = ' '; -+ } -+ } -+ -+ for( j = 0; j < 16 - i; j++ ) -+ *p++ = ' ', *p++ = ' ', *p++ = ' '; -+ -+ *p++ = ' ', *p++ = ' ', *p++ = ' '; -+ -+ for( j = 0; j < i; j++ ) -+ { -+ ch = pAddr[j]; -+ *p++ = (ch > ' ' && ch < '~') ? ch : '.'; -+ } -+ -+ *p++ = '\0'; -+ printk( "%s\r\n", szLine ); -+ -+ pAddr += i; -+ } -+ printk( "\r\n" ); -+} /* dumpaddr */ -+ -+ -+void kerSysMipsSoftReset(void) -+{ -+#if defined(CONFIG_BCM96348) -+ if (PERF->RevID == 0x634800A1) { -+ typedef void (*FNPTR) (void); -+ FNPTR bootaddr = (FNPTR) FLASH_BASE; -+ int i; -+ -+ /* Disable interrupts. */ -+ cli(); -+ -+ /* Reset all blocks. */ -+ PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS; -+ for( i = 0; i < 1000000; i++ ) -+ ; -+ PERF->BlockSoftReset |= BSR_ALL_BLOCKS; -+ /* Jump to the power on address. */ -+ (*bootaddr) (); -+ } -+ else -+ PERF->pll_control |= SOFT_RESET; // soft reset mips -+#else -+ PERF->pll_control |= SOFT_RESET; // soft reset mips -+#endif -+} -+ -+ -+int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId ) -+{ -+ int nRet = 0; -+ PMAC_ADDR_INFO pMai = NULL; -+ PMAC_ADDR_INFO pMaiFreeNoId = NULL; -+ PMAC_ADDR_INFO pMaiFreeId = NULL; -+ unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0; -+ -+ for( i = 0, pMai = g_pNvramInfo->MacAddrs; i < g_pNvramInfo->ulNumMacAddrs; -+ i++, pMai++ ) -+ { -+ if( ulId == pMai->ulId || ulId == MAC_ADDRESS_ANY ) -+ { -+ /* This MAC address has been used by the caller in the past. */ -+ memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr, -+ NVRAM_MAC_ADDRESS_LEN ); -+ shiftedIdx = i; -+ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS); -+ pMai->chInUse = 1; -+ pMaiFreeNoId = pMaiFreeId = NULL; -+ break; -+ } -+ else -+ if( pMai->chInUse == 0 ) -+ { -+ if( pMai->ulId == 0 && pMaiFreeNoId == NULL ) -+ { -+ /* This is an available MAC address that has never been -+ * used. -+ */ -+ pMaiFreeNoId = pMai; -+ ulIdxNoId = i; -+ } -+ else -+ if( pMai->ulId != 0 && pMaiFreeId == NULL ) -+ { -+ /* This is an available MAC address that has been used -+ * before. Use addresses that have never been used -+ * first, before using this one. -+ */ -+ pMaiFreeId = pMai; -+ ulIdxId = i; -+ } -+ } -+ } -+ -+ if( pMaiFreeNoId || pMaiFreeId ) -+ { -+ /* An available MAC address was found. */ -+ memcpy(pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,NVRAM_MAC_ADDRESS_LEN); -+ if( pMaiFreeNoId ) -+ { -+ shiftedIdx = ulIdxNoId; -+ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS); -+ pMaiFreeNoId->ulId = ulId; -+ pMaiFreeNoId->chInUse = 1; -+ } -+ else -+ { -+ shiftedIdx = ulIdxId; -+ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS); -+ pMaiFreeId->ulId = ulId; -+ pMaiFreeId->chInUse = 1; -+ } -+ } -+ else -+ if( i == g_pNvramInfo->ulNumMacAddrs ) -+ nRet = -EADDRNOTAVAIL; -+ -+ return( nRet ); -+} /* kerSysGetMacAddr */ -+ -+int kerSysReleaseMacAddress( unsigned char *pucaMacAddr ) -+{ -+ int nRet = -EINVAL; -+ unsigned long ulIdx = 0; -+ int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] - -+ g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]); -+ -+ // if overflow 255 (negitive), add 256 to have the correct index -+ if (idx < 0) -+ idx += 256; -+ ulIdx = (unsigned long) (idx >> SHIFT_BITS); -+ -+ if( ulIdx < g_pNvramInfo->ulNumMacAddrs ) -+ { -+ PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx]; -+ if( pMai->chInUse == 1 ) -+ { -+ pMai->chInUse = 0; -+ nRet = 0; -+ } -+ } -+ -+ return( nRet ); -+} /* kerSysReleaseMacAddr */ -+ -+int kerSysGetSdramSize( void ) -+{ -+ return( (int) g_pNvramInfo->ulSdramSize ); -+} /* kerSysGetSdramSize */ -+ -+ -+void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) -+{ -+ if (g_ledInitialized) -+ boardLedCtrl(ledName, ledState); -+} -+ -+unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t) -+{ -+ int mask = (*g_orig_fop_poll) (f, t); -+ -+ if( g_wakeup_monitor == 1 && g_monitor_file == f ) -+ { -+ /* If g_wakeup_monitor is non-0, the user mode application needs to -+ * return from a blocking select function. Return POLLPRI which will -+ * cause the select to return with the exception descriptor set. -+ */ -+ mask |= POLLPRI; -+ g_wakeup_monitor = 0; -+ } -+ -+ return( mask ); -+} -+ -+/* Put the user mode application that monitors link state on a run queue. */ -+void kerSysWakeupMonitorTask( void ) -+{ -+ g_wakeup_monitor = 1; -+ if( g_monitor_task ) -+ wake_up_process( g_monitor_task ); -+} -+ -+//******************************************************************************************** -+// misc. ioctl calls come to here. (flash, led, reset, kernel memory access, etc.) -+//******************************************************************************************** -+static int board_ioctl( struct inode *inode, struct file *flip, -+ unsigned int command, unsigned long arg ) -+{ -+ int ret = 0; -+ BOARD_IOCTL_PARMS ctrlParms; -+ unsigned char ucaMacAddr[NVRAM_MAC_ADDRESS_LEN]; -+ int allowedSize; -+ -+ switch (command) -+ { -+ case BOARD_IOCTL_FLASH_INIT: -+ // not used for now. kerSysBcmImageInit(); -+ break; -+ -+ -+ case BOARD_IOCTL_FLASH_WRITE: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ NVRAM_DATA SaveNvramData; -+ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); -+ -+ switch (ctrlParms.action) -+ { -+ case SCRATCH_PAD: -+ ret = kerSysScratchPadSet(ctrlParms.string, ctrlParms.buf, ctrlParms.offset); -+ break; -+ -+ case PERSISTENT: -+ ret = kerSysPersistentSet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset); -+ break; -+ -+ case NVRAM: -+ ret = kerSysNvRamSet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset); -+ break; -+ -+ case BCM_IMAGE_CFE: -+ if( ctrlParms.strLen <= 0 || ctrlParms.strLen > FLASH45_LENGTH_BOOT_ROM ) -+ { -+ printk("Illegal CFE size [%d]. Size allowed: [%d]\n", -+ ctrlParms.strLen, FLASH45_LENGTH_BOOT_ROM); -+ ret = -1; -+ break; -+ } -+ -+ // save NVRAM data into a local structure -+ memcpy( &SaveNvramData, pNvramData, sizeof(NVRAM_DATA) ); -+ -+ // set memory type field -+ BpGetSdramSize( (unsigned long *) &ctrlParms.string[SDRAM_TYPE_ADDRESS_OFFSET] ); -+ -+ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen); -+ -+ // if nvram is not valid, restore the current nvram settings -+ if( BpSetBoardId( pNvramData->szBoardId ) != BP_SUCCESS && -+ *(unsigned long *) pNvramData == NVRAM_DATA_ID ) -+ { -+ kerSysNvRamSet((char *) &SaveNvramData, sizeof(SaveNvramData), 0); -+ } -+ break; -+ -+ case BCM_IMAGE_FS: -+ allowedSize = (int) flash_get_total_size() - \ -+ FLASH_RESERVED_AT_END - TAG_LEN - FLASH45_LENGTH_BOOT_ROM; -+ if( ctrlParms.strLen <= 0 || ctrlParms.strLen > allowedSize) -+ { -+ printk("Illegal root file system size [%d]. Size allowed: [%d]\n", -+ ctrlParms.strLen, allowedSize); -+ ret = -1; -+ break; -+ } -+ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen); -+ kerSysMipsSoftReset(); -+ break; -+ -+ case BCM_IMAGE_KERNEL: // not used for now. -+ break; -+ case BCM_IMAGE_WHOLE: -+ if(ctrlParms.strLen <= 0) -+ { -+ printk("Illegal flash image size [%d].\n", ctrlParms.strLen); -+ ret = -1; -+ break; -+ } -+ -+ // save NVRAM data into a local structure -+ memcpy( &SaveNvramData, pNvramData, sizeof(NVRAM_DATA) ); -+ -+ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen); -+ -+ // if nvram is not valid, restore the current nvram settings -+ if( BpSetBoardId( pNvramData->szBoardId ) != BP_SUCCESS && -+ *(unsigned long *) pNvramData == NVRAM_DATA_ID ) -+ { -+ kerSysNvRamSet((char *) &SaveNvramData, sizeof(SaveNvramData), 0); -+ } -+ -+ kerSysMipsSoftReset(); -+ break; -+ -+ default: -+ ret = -EINVAL; -+ printk("flash_ioctl_command: invalid command %d\n", ctrlParms.action); -+ break; -+ } -+ ctrlParms.result = ret; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_FLASH_READ: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ switch (ctrlParms.action) -+ { -+ case SCRATCH_PAD: -+ ret = kerSysScratchPadGet(ctrlParms.string, ctrlParms.buf, ctrlParms.offset); -+ break; -+ -+ case PERSISTENT: -+ ret = kerSysPersistentGet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset); -+ break; -+ -+ case NVRAM: -+ ret = kerSysNvRamGet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset); -+ break; -+ -+ case FLASH_SIZE: -+ ret = kerSysFlashSizeGet(); -+ break; -+ -+ default: -+ ret = -EINVAL; -+ printk("Not supported. invalid command %d\n", ctrlParms.action); -+ break; -+ } -+ ctrlParms.result = ret; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_GET_NR_PAGES: -+ ctrlParms.result = nr_free_pages() + get_page_cache_size(); -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ break; -+ -+ case BOARD_IOCTL_DUMP_ADDR: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ dumpaddr( (unsigned char *) ctrlParms.string, ctrlParms.strLen ); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_SET_MEMORY: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ unsigned long *pul = (unsigned long *) ctrlParms.string; -+ unsigned short *pus = (unsigned short *) ctrlParms.string; -+ unsigned char *puc = (unsigned char *) ctrlParms.string; -+ switch( ctrlParms.strLen ) -+ { -+ case 4: -+ *pul = (unsigned long) ctrlParms.offset; -+ break; -+ case 2: -+ *pus = (unsigned short) ctrlParms.offset; -+ break; -+ case 1: -+ *puc = (unsigned char) ctrlParms.offset; -+ break; -+ } -+ dumpaddr( (unsigned char *) ctrlParms.string, sizeof(long) ); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_MIPS_SOFT_RESET: -+ kerSysMipsSoftReset(); -+ break; -+ -+ case BOARD_IOCTL_LED_CTRL: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ kerSysLedCtrl((BOARD_LED_NAME)ctrlParms.strLen, (BOARD_LED_STATE)ctrlParms.offset); -+ ret = 0; -+ } -+ break; -+ -+ case BOARD_IOCTL_GET_ID: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, -+ sizeof(ctrlParms)) == 0) -+ { -+ if( ctrlParms.string ) -+ { -+ char *p = (char *) get_system_type(); -+ if( strlen(p) + 1 < ctrlParms.strLen ) -+ ctrlParms.strLen = strlen(p) + 1; -+ __copy_to_user(ctrlParms.string, p, ctrlParms.strLen); -+ } -+ -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, -+ sizeof(BOARD_IOCTL_PARMS)); -+ } -+ break; -+ -+ case BOARD_IOCTL_GET_MAC_ADDRESS: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ ctrlParms.result = kerSysGetMacAddress( ucaMacAddr, -+ ctrlParms.offset ); -+ -+ if( ctrlParms.result == 0 ) -+ { -+ __copy_to_user(ctrlParms.string, ucaMacAddr, -+ sizeof(ucaMacAddr)); -+ } -+ -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, -+ sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_RELEASE_MAC_ADDRESS: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ if (copy_from_user((void*)ucaMacAddr, (void*)ctrlParms.string, \ -+ NVRAM_MAC_ADDRESS_LEN) == 0) -+ { -+ ctrlParms.result = kerSysReleaseMacAddress( ucaMacAddr ); -+ } -+ else -+ { -+ ctrlParms.result = -EACCES; -+ } -+ -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, -+ sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_GET_PSI_SIZE: -+ ctrlParms.result = (int) g_pNvramInfo->ulPsiSize; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ break; -+ -+ case BOARD_IOCTL_GET_SDRAM_SIZE: -+ ctrlParms.result = (int) g_pNvramInfo->ulSdramSize; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ break; -+ -+ case BOARD_IOCTL_GET_BASE_MAC_ADDRESS: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ __copy_to_user(ctrlParms.string, g_pNvramInfo->ucaBaseMacAddr, NVRAM_MAC_ADDRESS_LEN); -+ ctrlParms.result = 0; -+ -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, -+ sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_GET_CHIP_ID: -+ ctrlParms.result = (int) (PERF->RevID & 0xFFFF0000) >> 16; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ break; -+ -+ case BOARD_IOCTL_GET_NUM_ENET: { -+ ETHERNET_MAC_INFO EnetInfos[BP_MAX_ENET_MACS]; -+ int i, numeth = 0; -+ if (BpGetEthernetMacInfo(EnetInfos, BP_MAX_ENET_MACS) == BP_SUCCESS) { -+ for( i = 0; i < BP_MAX_ENET_MACS; i++) { -+ if (EnetInfos[i].ucPhyType != BP_ENET_NO_PHY) { -+ numeth++; -+ } -+ } -+ ctrlParms.result = numeth; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ } -+ -+ case BOARD_IOCTL_GET_CFE_VER: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ char *vertag = (char *)(FLASH_BASE + CFE_VERSION_OFFSET); -+ if (ctrlParms.strLen < CFE_VERSION_SIZE) { -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = -EFAULT; -+ } -+ else if (strncmp(vertag, "cfe-v", 5)) { // no tag info in flash -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else { -+ ctrlParms.result = 1; -+ __copy_to_user(ctrlParms.string, vertag+CFE_VERSION_MARK_SIZE, CFE_VERSION_SIZE); -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ -+ case BOARD_IOCTL_GET_ENET_CFG: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ ETHERNET_MAC_INFO EnetInfos[BP_MAX_ENET_MACS]; -+ if (BpGetEthernetMacInfo(EnetInfos, BP_MAX_ENET_MACS) == BP_SUCCESS) { -+ if (ctrlParms.strLen == sizeof(EnetInfos)) { -+ __copy_to_user(ctrlParms.string, EnetInfos, sizeof(EnetInfos)); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } else -+ ret = -EFAULT; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ -+#if defined (WIRELESS) -+ case BOARD_IOCTL_GET_WLAN_ANT_INUSE: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ unsigned short antInUse = 0; -+ if (BpGetWirelessAntInUse(&antInUse) == BP_SUCCESS) { -+ if (ctrlParms.strLen == sizeof(antInUse)) { -+ __copy_to_user(ctrlParms.string, &antInUse, sizeof(antInUse)); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } else -+ ret = -EFAULT; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+#endif -+ case BOARD_IOCTL_SET_TRIGGER_EVENT: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data; -+ ctrlParms.result = -EFAULT; -+ ret = -EFAULT; -+ if (ctrlParms.strLen == sizeof(unsigned long)) { -+ board_ioc->eventmask |= *((int*)ctrlParms.string); -+#if defined (WIRELESS) -+ if((board_ioc->eventmask & SES_EVENTS)) { -+ if(sesBtn_irq != BP_NOT_DEFINED) { -+ BcmHalInterruptEnable(sesBtn_irq); -+ ctrlParms.result = 0; -+ ret = 0; -+ } -+ } -+#endif -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ } -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ -+ case BOARD_IOCTL_GET_TRIGGER_EVENT: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data; -+ if (ctrlParms.strLen == sizeof(unsigned long)) { -+ __copy_to_user(ctrlParms.string, &board_ioc->eventmask, sizeof(unsigned long)); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } else -+ ret = -EFAULT; -+ -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ -+ case BOARD_IOCTL_UNSET_TRIGGER_EVENT: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ if (ctrlParms.strLen == sizeof(unsigned long)) { -+ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data; -+ board_ioc->eventmask &= (~(*((int*)ctrlParms.string))); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } else -+ ret = -EFAULT; -+ -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+#if defined (WIRELESS) -+ case BOARD_IOCTL_SET_SES_LED: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ if (ctrlParms.strLen == sizeof(int)) { -+ sesLed_ctrl(*(int*)ctrlParms.string); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } else -+ ret = -EFAULT; -+ -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+#endif -+ -+ case BOARD_IOCTL_SET_MONITOR_FD: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ int fput_needed = 0; -+ -+ g_monitor_file = fget_light( ctrlParms.offset, &fput_needed ); -+ if( g_monitor_file ) { -+ /* Hook this file descriptor's poll function in order to set -+ * the exception descriptor when there is a change in link -+ * state. -+ */ -+ g_monitor_task = current; -+ g_orig_fop_poll = g_monitor_file->f_op->poll; -+ g_monitor_file->f_op->poll = kerSysMonitorPollHook; -+ } -+ } -+ break; -+ -+ case BOARD_IOCTL_WAKEUP_MONITOR_TASK: -+ kerSysWakeupMonitorTask(); -+ break; -+ -+ default: -+ ret = -EINVAL; -+ ctrlParms.result = 0; -+ printk("board_ioctl: invalid command %x, cmd %d .\n",command,_IOC_NR(command)); -+ break; -+ -+ } /* switch */ -+ -+ return (ret); -+ -+} /* board_ioctl */ -+ -+/*************************************************************************** -+ * SES Button ISR/GPIO/LED functions. -+ ***************************************************************************/ -+#if defined (WIRELESS) -+static irqreturn_t sesBtn_isr(int irq, void *dev_id, struct pt_regs *ptregs) -+{ -+#if defined(_BCM96338_) || defined(CONFIG_BCM96338) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96345_) || defined(CONFIG_BCM96345) -+ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned short *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96348_) || defined (CONFIG_BCM96348) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+ -+ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 ) -+ { -+ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio); -+ gpio_reg = &GPIO->GPIOio_high; -+ } -+#endif -+ -+ if (!(*gpio_reg & gpio_mask)){ -+ wake_up_interruptible(&g_board_wait_queue); -+ return IRQ_RETVAL(1); -+ } else { -+ return IRQ_RETVAL(0); -+ } -+} -+ -+static void __init sesBtn_mapGpio() -+{ -+ if( BpGetWirelessSesBtnGpio(&sesBtn_gpio) == BP_SUCCESS ) -+ { -+ printk("SES: Button GPIO 0x%x is enabled\n", sesBtn_gpio); -+ } -+} -+ -+static void __init sesBtn_mapIntr(int context) -+{ -+ if( BpGetWirelessSesExtIntr(&sesBtn_irq) == BP_SUCCESS ) -+ { -+ printk("SES: Button Interrupt 0x%x is enabled\n", sesBtn_irq); -+ } -+ else -+ return; -+ -+ sesBtn_irq += INTERRUPT_ID_EXTERNAL_0; -+ -+ if (BcmHalMapInterrupt((FN_HANDLER)sesBtn_isr, context, sesBtn_irq)) { -+ printk("SES: Interrupt mapping failed\n"); -+ } -+ BcmHalInterruptEnable(sesBtn_irq); -+} -+ -+ -+static unsigned int sesBtn_poll(struct file *file, struct poll_table_struct *wait) -+{ -+#if defined(_BCM96338_) || defined(CONFIG_BCM96338) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96345_) || defined(CONFIG_BCM96345) -+ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned short *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96348_) || defined (CONFIG_BCM96348) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+ -+ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 ) -+ { -+ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio); -+ gpio_reg = &GPIO->GPIOio_high; -+ } -+#endif -+ -+ if (!(*gpio_reg & gpio_mask)){ -+ return POLLIN; -+ } -+ return 0; -+} -+ -+static ssize_t sesBtn_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) -+{ -+ volatile unsigned int event=0; -+ ssize_t ret=0; -+ -+#if defined(_BCM96338_) || defined (CONFIG_BCM96338) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96345_) || defined (CONFIG_BCM96345) -+ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned short *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96348_) || defined (CONFIG_BCM96348) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+ -+ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 ) -+ { -+ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio); -+ gpio_reg = &GPIO->GPIOio_high; -+ } -+#endif -+ -+ if(*gpio_reg & gpio_mask){ -+ BcmHalInterruptEnable(sesBtn_irq); -+ return ret; -+ } -+ event = SES_EVENTS; -+ __copy_to_user((char*)buffer, (char*)&event, sizeof(event)); -+ BcmHalInterruptEnable(sesBtn_irq); -+ count -= sizeof(event); -+ buffer += sizeof(event); -+ ret += sizeof(event); -+ return ret; -+} -+ -+static void __init sesLed_mapGpio() -+{ -+ if( BpGetWirelessSesBtnGpio(&sesLed_gpio) == BP_SUCCESS ) -+ { -+ printk("SES: LED GPIO 0x%x is enabled\n", sesBtn_gpio); -+ } -+} -+ -+static void sesLed_ctrl(int action) -+{ -+ -+ //char status = ((action >> 8) & 0xff); /* extract status */ -+ //char event = ((action >> 16) & 0xff); /* extract event */ -+ //char blinktype = ((action >> 24) & 0xff); /* extract blink type for SES_LED_BLINK */ -+ -+ BOARD_LED_STATE led; -+ -+ if(sesLed_gpio == BP_NOT_DEFINED) -+ return; -+ -+ action &= 0xff; /* extract led */ -+ -+ //printk("blinktype=%d, event=%d, status=%d\n",(int)blinktype, (int)event, (int)status); -+ -+ switch (action) -+ { -+ case SES_LED_ON: -+ //printk("SES: led on\n"); -+ led = kLedStateOn; -+ break; -+ case SES_LED_BLINK: -+ //printk("SES: led blink\n"); -+ led = kLedStateSlowBlinkContinues; -+ break; -+ case SES_LED_OFF: -+ default: -+ //printk("SES: led off\n"); -+ led = kLedStateOff; -+ } -+ -+ kerSysLedCtrl(kLedSes, led); -+} -+ -+static void __init ses_board_init() -+{ -+ sesBtn_mapGpio(); -+ sesBtn_mapIntr(0); -+ sesLed_mapGpio(); -+} -+static void __exit ses_board_deinit() -+{ -+ if(sesBtn_irq) -+ BcmHalInterruptDisable(sesBtn_irq); -+} -+#endif -+ -+/*************************************************************************** -+ * Dying gasp ISR and functions. -+ ***************************************************************************/ -+#define KERSYS_DBG printk -+ -+#if defined(CONFIG_BCM96345) -+#define CYCLE_PER_US 70 -+#elif defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) -+/* The BCM6348 cycles per microsecond is really variable since the BCM6348 -+ * MIPS speed can vary depending on the PLL settings. However, an appoximate -+ * value of 120 will still work OK for the test being done. -+ */ -+#define CYCLE_PER_US 120 -+#endif -+#define DG_GLITCH_TO (100*CYCLE_PER_US) -+ -+static void __init kerSysDyingGaspMapIntr() -+{ -+ unsigned long ulIntr; -+ -+#if defined(CONFIG_BCM96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(_BCM96338_) -+ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) { -+ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, INTERRUPT_ID_DG); -+ BcmHalInterruptEnable( INTERRUPT_ID_DG ); -+ } -+#elif defined(CONFIG_BCM96345) || defined(_BCM96345_) -+ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) { -+ ulIntr += INTERRUPT_ID_EXTERNAL_0; -+ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, ulIntr); -+ BcmHalInterruptEnable( ulIntr ); -+ } -+#endif -+ -+} -+ -+void kerSysSetWdTimer(ulong timeUs) -+{ -+ TIMER->WatchDogDefCount = timeUs * (FPERIPH/1000000); -+ TIMER->WatchDogCtl = 0xFF00; -+ TIMER->WatchDogCtl = 0x00FF; -+} -+ -+ulong kerSysGetCycleCount(void) -+{ -+ ulong cnt; -+#ifdef _WIN32_WCE -+ cnt = 0; -+#else -+ __asm volatile("mfc0 %0, $9":"=d"(cnt)); -+#endif -+ return(cnt); -+} -+ -+static Bool kerSysDyingGaspCheckPowerLoss(void) -+{ -+ ulong clk0; -+ ulong ulIntr; -+ -+ ulIntr = 0; -+ clk0 = kerSysGetCycleCount(); -+ -+ UART->Data = 'D'; -+ UART->Data = '%'; -+ UART->Data = 'G'; -+ -+#if defined(CONFIG_BCM96345) -+ BpGetAdslDyingGaspExtIntr( &ulIntr ); -+ -+ do { -+ ulong clk1; -+ -+ clk1 = kerSysGetCycleCount(); /* time cleared */ -+ /* wait a little to get new reading */ -+ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) -+ ; -+ } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); -+ -+ if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) { /* power glitch */ -+ BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0); -+ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); -+ return 0; -+ } -+#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS) -+ do { -+ ulong clk1; -+ -+ clk1 = kerSysGetCycleCount(); /* time cleared */ -+ /* wait a little to get new reading */ -+ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) -+ ; -+ } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); -+ -+ if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) { -+ BcmHalInterruptEnable( INTERRUPT_ID_DG ); -+ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); -+ return 0; -+ } -+#endif -+ return 1; -+} -+ -+static void kerSysDyingGaspShutdown( void ) -+{ -+ kerSysSetWdTimer(1000000); -+#if defined(CONFIG_BCM96345) -+ PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN); -+#elif defined(CONFIG_BCM96348) -+ PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN); -+#endif -+} -+ -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) -+static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs) -+#else -+static unsigned int kerSysDyingGaspIsr(void) -+#endif -+{ -+ struct list_head *pos; -+ CB_DGASP_LIST *tmp, *dsl = NULL; -+ -+ if (kerSysDyingGaspCheckPowerLoss()) { -+ -+ /* first to turn off everything other than dsl */ -+ list_for_each(pos, &g_cb_dgasp_list_head->list) { -+ tmp = list_entry(pos, CB_DGASP_LIST, list); -+ if(strncmp(tmp->name, "dsl", 3)) { -+ (tmp->cb_dgasp_fn)(tmp->context); -+ }else { -+ dsl = tmp; -+ } -+ } -+ -+ /* now send dgasp */ -+ if(dsl) -+ (dsl->cb_dgasp_fn)(dsl->context); -+ -+ /* reset and shutdown system */ -+ kerSysDyingGaspShutdown(); -+ } -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) -+return( IRQ_HANDLED ); -+#else -+ return( 1 ); -+#endif -+} -+ -+static void __init kerSysInitDyingGaspHandler( void ) -+{ -+ CB_DGASP_LIST *new_node; -+ -+ if( g_cb_dgasp_list_head != NULL) { -+ printk("Error: kerSysInitDyingGaspHandler: list head is not null\n"); -+ return; -+ } -+ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); -+ memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); -+ INIT_LIST_HEAD(&new_node->list); -+ g_cb_dgasp_list_head = new_node; -+ -+} /* kerSysInitDyingGaspHandler */ -+ -+static void __exit kerSysDeinitDyingGaspHandler( void ) -+{ -+ struct list_head *pos; -+ CB_DGASP_LIST *tmp; -+ -+ if(g_cb_dgasp_list_head == NULL) -+ return; -+ -+ list_for_each(pos, &g_cb_dgasp_list_head->list) { -+ tmp = list_entry(pos, CB_DGASP_LIST, list); -+ list_del(pos); -+ kfree(tmp); -+ } -+ -+ kfree(g_cb_dgasp_list_head); -+ g_cb_dgasp_list_head = NULL; -+ -+} /* kerSysDeinitDyingGaspHandler */ -+ -+void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context) -+{ -+ CB_DGASP_LIST *new_node; -+ -+ if( g_cb_dgasp_list_head == NULL) { -+ printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n"); -+ return; -+ } -+ -+ if( devname == NULL || cbfn == NULL ) { -+ printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context); -+ return; -+ } -+ -+ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); -+ memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); -+ INIT_LIST_HEAD(&new_node->list); -+ strncpy(new_node->name, devname, IFNAMSIZ); -+ new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn; -+ new_node->context = context; -+ list_add(&new_node->list, &g_cb_dgasp_list_head->list); -+ -+ printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname); -+ -+} /* kerSysRegisterDyingGaspHandler */ -+ -+void kerSysDeregisterDyingGaspHandler(char *devname) -+{ -+ struct list_head *pos; -+ CB_DGASP_LIST *tmp; -+ -+ if(g_cb_dgasp_list_head == NULL) { -+ printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n"); -+ return; -+ } -+ -+ if(devname == NULL) { -+ printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n"); -+ return; -+ } -+ -+ printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname); -+ -+ list_for_each(pos, &g_cb_dgasp_list_head->list) { -+ tmp = list_entry(pos, CB_DGASP_LIST, list); -+ if(!strcmp(tmp->name, devname)) { -+ list_del(pos); -+ kfree(tmp); -+ printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname); -+ return; -+ } -+ } -+ printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname); -+ -+} /* kerSysDeregisterDyingGaspHandler */ -+ -+/*************************************************************************** -+ * MACRO to call driver initialization and cleanup functions. -+ ***************************************************************************/ -+module_init( brcm_board_init ); -+module_exit( brcm_board_cleanup ); -+ -+EXPORT_SYMBOL(kerSysNvRamGet); -+EXPORT_SYMBOL(dumpaddr); -+EXPORT_SYMBOL(kerSysGetMacAddress); -+EXPORT_SYMBOL(kerSysReleaseMacAddress); -+EXPORT_SYMBOL(kerSysGetSdramSize); -+EXPORT_SYMBOL(kerSysLedCtrl); -+EXPORT_SYMBOL(kerSysLedRegisterHwHandler); -+EXPORT_SYMBOL(BpGetBoardIds); -+EXPORT_SYMBOL(BpGetSdramSize); -+EXPORT_SYMBOL(BpGetPsiSize); -+EXPORT_SYMBOL(BpGetEthernetMacInfo); -+EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios); -+EXPORT_SYMBOL(BpGetPressAndHoldResetGpio); -+EXPORT_SYMBOL(BpGetVoipResetGpio); -+EXPORT_SYMBOL(BpGetVoipIntrGpio); -+EXPORT_SYMBOL(BpGetPcmciaResetGpio); -+EXPORT_SYMBOL(BpGetRtsCtsUartGpios); -+EXPORT_SYMBOL(BpGetAdslLedGpio); -+EXPORT_SYMBOL(BpGetAdslFailLedGpio); -+EXPORT_SYMBOL(BpGetWirelessLedGpio); -+EXPORT_SYMBOL(BpGetUsbLedGpio); -+EXPORT_SYMBOL(BpGetHpnaLedGpio); -+EXPORT_SYMBOL(BpGetWanDataLedGpio); -+EXPORT_SYMBOL(BpGetPppLedGpio); -+EXPORT_SYMBOL(BpGetPppFailLedGpio); -+EXPORT_SYMBOL(BpGetVoipLedGpio); -+EXPORT_SYMBOL(BpGetWirelessExtIntr); -+EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr); -+EXPORT_SYMBOL(BpGetVoipExtIntr); -+EXPORT_SYMBOL(BpGetHpnaExtIntr); -+EXPORT_SYMBOL(BpGetHpnaChipSelect); -+EXPORT_SYMBOL(BpGetVoipChipSelect); -+EXPORT_SYMBOL(BpGetWirelessSesBtnGpio); -+EXPORT_SYMBOL(BpGetWirelessSesExtIntr); -+EXPORT_SYMBOL(BpGetWirelessSesLedGpio); -+EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler); -+EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler); -+EXPORT_SYMBOL(kerSysGetCycleCount); -+EXPORT_SYMBOL(kerSysSetWdTimer); -+EXPORT_SYMBOL(kerSysWakeupMonitorTask); -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/cfiflash.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/cfiflash.c ---- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/cfiflash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/cfiflash.c 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,692 @@ -+/************************************************************************/ -+/* */ -+/* AMD CFI Enabled Flash Memory Drivers */ -+/* File name: CFIFLASH.C */ -+/* Revision: 1.0 5/07/98 */ -+/* */ -+/* Copyright (c) 1998 ADVANCED MICRO DEVICES, INC. All Rights Reserved. */ -+/* This software is unpublished and contains the trade secrets and */ -+/* confidential proprietary information of AMD. Unless otherwise */ -+/* provided in the Software Agreement associated herewith, it is */ -+/* licensed in confidence "AS IS" and is not to be reproduced in whole */ -+/* or part by any means except for backup. Use, duplication, or */ -+/* disclosure by the Government is subject to the restrictions in */ -+/* paragraph (b) (3) (B) of the Rights in Technical Data and Computer */ -+/* Software clause in DFAR 52.227-7013 (a) (Oct 1988). */ -+/* Software owned by */ -+/* Advanced Micro Devices, Inc., */ -+/* One AMD Place, */ -+/* P.O. Box 3453 */ -+/* Sunnyvale, CA 94088-3453. */ -+/************************************************************************/ -+/* This software constitutes a basic shell of source code for */ -+/* programming all AMD Flash components. AMD */ -+/* will not be responsible for misuse or illegal use of this */ -+/* software for devices not supported herein. AMD is providing */ -+/* this source code "AS IS" and will not be responsible for */ -+/* issues arising from incorrect user implementation of the */ -+/* source code herein. It is the user's responsibility to */ -+/* properly design-in this source code. */ -+/* */ -+/************************************************************************/ -+#ifdef _CFE_ -+#include "lib_types.h" -+#include "lib_printf.h" -+#include "lib_string.h" -+#include "cfe_timer.h" -+#define printk printf -+#else // linux -+#include -+#include -+#include -+#endif -+ -+#include "cfiflash.h" -+ -+static int flash_wait(WORD sector, int offset, UINT16 data); -+static UINT16 flash_get_device_id(void); -+static int flash_get_cfi(struct cfi_query *query, UINT16 *cfi_struct, int flashFamily); -+static int flash_write(WORD sector, int offset, byte *buf, int nbytes); -+static void flash_command(int command, WORD sector, int offset, UINT16 data); -+ -+/*********************************************************************/ -+/* 'meminfo' should be a pointer, but most C compilers will not */ -+/* allocate static storage for a pointer without calling */ -+/* non-portable functions such as 'new'. We also want to avoid */ -+/* the overhead of passing this pointer for every driver call. */ -+/* Systems with limited heap space will need to do this. */ -+/*********************************************************************/ -+struct flashinfo meminfo; /* Flash information structure */ -+static int flashFamily = FLASH_UNDEFINED; -+static int totalSize = 0; -+static struct cfi_query query; -+ -+static UINT16 cfi_data_struct_29W160[] = { -+ 0x0020, 0x0049, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x0051, 0x0052, 0x0059, 0x0002, 0x0000, 0x0040, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0027, 0x0036, 0x0000, 0x0000, 0x0004, -+ 0x0000, 0x000a, 0x0000, 0x0004, 0x0000, 0x0003, 0x0000, 0x0015, -+ 0x0002, 0x0000, 0x0000, 0x0000, 0x0004, 0x0000, 0x0000, 0x0040, -+ 0x0000, 0x0001, 0x0000, 0x0020, 0x0000, 0x0000, 0x0000, 0x0080, -+ 0x0000, 0x001e, 0x0000, 0x0000, 0x0001, 0xffff, 0xffff, 0xffff, -+ 0x0050, 0x0052, 0x0049, 0x0031, 0x0030, 0x0000, 0x0002, 0x0001, -+ 0x0001, 0x0004, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0x0002, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0x0888, 0x252b, 0x8c84, 0x7dbc, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff -+}; -+ -+ -+/*********************************************************************/ -+/* Init_flash is used to build a sector table from the information */ -+/* provided through the CFI query. This information is translated */ -+/* from erase_block information to base:offset information for each */ -+/* individual sector. This information is then stored in the meminfo */ -+/* structure, and used throughout the driver to access sector */ -+/* information. */ -+/* */ -+/* This is more efficient than deriving the sector base:offset */ -+/* information every time the memory map switches (since on the */ -+/* development platform can only map 64k at a time). If the entire */ -+/* flash memory array can be mapped in, then the addition static */ -+/* allocation for the meminfo structure can be eliminated, but the */ -+/* drivers will have to be re-written. */ -+/* */ -+/* The meminfo struct occupies 653 bytes of heap space, depending */ -+/* on the value of the define MAXSECTORS. Adjust to suit */ -+/* application */ -+/*********************************************************************/ -+byte flash_init(void) -+{ -+ int i=0, j=0, count=0; -+ int basecount=0L; -+ UINT16 device_id; -+ int flipCFIGeometry = FALSE; -+ -+ /* First, assume -+ * a single 8k sector for sector 0. This is to allow -+ * the system to perform memory mapping to the device, -+ * even though the actual physical layout is unknown. -+ * Once mapped in, the CFI query will produce all -+ * relevant information. -+ */ -+ meminfo.addr = 0L; -+ meminfo.areg = 0; -+ meminfo.nsect = 1; -+ meminfo.bank1start = 0; -+ meminfo.bank2start = 0; -+ -+ meminfo.sec[0].size = 8192; -+ meminfo.sec[0].base = 0x00000; -+ meminfo.sec[0].bank = 1; -+ -+ flash_command(FLASH_RESET, 0, 0, 0); -+ -+ device_id = flash_get_device_id(); -+ -+ switch (device_id) { -+ case ID_I28F160C3B: -+ case ID_I28F320C3B: -+ case ID_I28F160C3T: -+ case ID_I28F320C3T: -+ flashFamily = FLASH_INTEL; -+ break; -+ case ID_AM29DL800B: -+ case ID_AM29LV800B: -+ case ID_AM29LV400B: -+ case ID_AM29LV160B: -+ case ID_AM29LV320B: -+ case ID_MX29LV320AB: -+ case ID_AM29LV320MB: -+ case ID_AM29DL800T: -+ case ID_AM29LV800T: -+ case ID_AM29LV160T: -+ case ID_AM29LV320T: -+ case ID_MX29LV320AT: -+ case ID_AM29LV320MT: -+ flashFamily = FLASH_AMD; -+ break; -+ case ID_SST39VF1601: -+ case ID_SST39VF3201: -+ flashFamily = FLASH_SST; -+ break; -+ default: -+ printk("Flash memory not supported! Device id = %x\n", device_id); -+ return -1; -+ } -+ -+ if (flash_get_cfi(&query, 0, flashFamily) == -1) { -+ switch(device_id) { -+ case ID_AM29LV160T: -+ case ID_AM29LV160B: -+ flash_get_cfi(&query, cfi_data_struct_29W160, flashFamily); -+ break; -+ default: -+ printk("CFI data structure not found. Device id = %x\n", device_id); -+ return -1; -+ } -+ } -+ -+ // need to determine if it top or bottom boot here -+ switch (device_id) -+ { -+ case ID_AM29DL800B: -+ case ID_AM29LV800B: -+ case ID_AM29LV400B: -+ case ID_AM29LV160B: -+ case ID_AM29LV320B: -+ case ID_MX29LV320AB: -+ case ID_AM29LV320MB: -+ case ID_I28F160C3B: -+ case ID_I28F320C3B: -+ case ID_I28F160C3T: -+ case ID_I28F320C3T: -+ case ID_SST39VF1601: -+ case ID_SST39VF3201: -+ flipCFIGeometry = FALSE; -+ break; -+ case ID_AM29DL800T: -+ case ID_AM29LV800T: -+ case ID_AM29LV160T: -+ case ID_AM29LV320T: -+ case ID_MX29LV320AT: -+ case ID_AM29LV320MT: -+ flipCFIGeometry = TRUE; -+ break; -+ default: -+ printk("Flash memory not supported! Device id = %x\n", device_id); -+ return -1; -+ } -+ -+ count=0;basecount=0L; -+ -+ if (!flipCFIGeometry) -+ { -+ for (i=0; i= 0; i--) { -+ for(j=0; j relative_addr ) -+ { -+ blk_start--; // last blk, dec by 1 -+ } -+ else -+ if( blk_start == last_blk ) -+ { -+ printk("Address is too big.\n"); -+ blk_start = -1; -+ } -+ -+ return( blk_start ); -+} -+ -+/************************************************************************/ -+/* The purpose of flash_get_total_size() is to return the total size of */ -+/* the flash */ -+/************************************************************************/ -+int flash_get_total_size() -+{ -+ return totalSize; -+} -+ -+/*********************************************************************/ -+/* Flash_command() is the main driver function. It performs */ -+/* every possible command available to AMD B revision */ -+/* flash parts. Note that this command is not used directly, but */ -+/* rather called through the API wrapper functions provided below. */ -+/*********************************************************************/ -+static void flash_command(int command, WORD sector, int offset, UINT16 data) -+{ -+ volatile UINT16 *flashptr; -+ volatile UINT16 *flashbase; -+ -+ flashptr = (UINT16 *) flash_get_memptr(sector); -+ flashbase = (UINT16 *) flash_get_memptr(0); -+ -+ switch (flashFamily) { -+ case FLASH_UNDEFINED: -+ /* These commands should work for AMD, Intel and SST flashes */ -+ switch (command) { -+ case FLASH_RESET: -+ flashptr[0] = 0xF0; -+ flashptr[0] = 0xFF; -+ break; -+ case FLASH_READ_ID: -+ flashptr[0x5555] = 0xAA; /* unlock 1 */ -+ flashptr[0x2AAA] = 0x55; /* unlock 2 */ -+ flashptr[0x5555] = 0x90; -+ break; -+ default: -+ break; -+ } -+ break; -+ case FLASH_AMD: -+ switch (command) { -+ case FLASH_RESET: -+ flashptr[0] = 0xF0; -+ break; -+ case FLASH_READ_ID: -+ flashptr[0x555] = 0xAA; /* unlock 1 */ -+ flashptr[0x2AA] = 0x55; /* unlock 2 */ -+ flashptr[0x555] = 0x90; -+ break; -+ case FLASH_CFIQUERY: -+ flashptr[0x55] = 0x98; -+ break; -+ case FLASH_UB: -+ flashptr[0x555] = 0xAA; /* unlock 1 */ -+ flashptr[0x2AA] = 0x55; /* unlock 2 */ -+ flashptr[0x555] = 0x20; -+ break; -+ case FLASH_PROG: -+ flashptr[0] = 0xA0; -+ flashptr[offset/2] = data; -+ break; -+ case FLASH_UBRESET: -+ flashptr[0] = 0x90; -+ flashptr[0] = 0x00; -+ break; -+ case FLASH_SERASE: -+ flashptr[0x555] = 0xAA; /* unlock 1 */ -+ flashptr[0x2AA] = 0x55; /* unlock 2 */ -+ flashptr[0x555] = 0x80; -+ flashptr[0x555] = 0xAA; -+ flashptr[0x2AA] = 0x55; -+ flashptr[0] = 0x30; -+ break; -+ default: -+ break; -+ } -+ break; -+ case FLASH_INTEL: -+ switch (command) { -+ case FLASH_RESET: -+ flashptr[0] = 0xFF; -+ break; -+ case FLASH_READ_ID: -+ flashptr[0] = 0x90; -+ break; -+ case FLASH_CFIQUERY: -+ flashptr[0] = 0x98; -+ break; -+ case FLASH_PROG: -+ flashptr[0] = 0x40; -+ flashptr[offset/2] = data; -+ break; -+ case FLASH_SERASE: -+ flashptr[0] = 0x60; -+ flashptr[0] = 0xD0; -+ flashptr[0] = 0x20; -+ flashptr[0] = 0xD0; -+ break; -+ default: -+ break; -+ } -+ break; -+ case FLASH_SST: -+ switch (command) { -+ case FLASH_RESET: -+ flashbase[0x5555] = 0xAA; /* unlock 1 */ -+ flashbase[0x2AAA] = 0x55; /* unlock 2 */ -+ flashbase[0x5555] = 0xf0; -+ break; -+ case FLASH_READ_ID: -+ flashbase[0x5555] = 0xAA; /* unlock 1 */ -+ flashbase[0x2AAA] = 0x55; /* unlock 2 */ -+ flashbase[0x5555] = 0x90; -+ break; -+ case FLASH_CFIQUERY: -+ flashbase[0x5555] = 0xAA; /* unlock 1 */ -+ flashbase[0x2AAA] = 0x55; /* unlock 2 */ -+ flashbase[0x5555] = 0x98; -+ break; -+ case FLASH_UB: -+ break; -+ case FLASH_PROG: -+ flashbase[0x5555] = 0xAA; /* unlock 1 */ -+ flashbase[0x2AAA] = 0x55; /* unlock 2 */ -+ flashbase[0x5555] = 0xa0; -+ flashptr[offset/2] = data; -+ break; -+ case FLASH_UBRESET: -+ break; -+ case FLASH_SERASE: -+ flashbase[0x5555] = 0xAA; /* unlock 1 */ -+ flashbase[0x2AAA] = 0x55; /* unlock 2 */ -+ flashbase[0x5555] = 0x80; -+ flashbase[0x5555] = 0xAA; -+ flashbase[0x2AAA] = 0x55; -+ flashptr[0] = 0x30; -+ break; -+ default: -+ break; -+ } -+ break; -+ default: -+ break; -+ } -+} -+ -+/*********************************************************************/ -+/* flash_write extends the functionality of flash_program() by */ -+/* providing an faster way to program multiple data words, without */ -+/* needing the function overhead of looping algorithms which */ -+/* program word by word. This function utilizes fast pointers */ -+/* to quickly loop through bulk data. */ -+/*********************************************************************/ -+static int flash_write(WORD sector, int offset, byte *buf, int nbytes) -+{ -+ UINT16 *src; -+ src = (UINT16 *)buf; -+ -+ if ((nbytes | offset) & 1) { -+ return -1; -+ } -+ -+ flash_command(FLASH_UB, 0, 0, 0); -+ while (nbytes > 0) { -+ flash_command(FLASH_PROG, sector, offset, *src); -+ if (flash_wait(sector, offset, *src) != STATUS_READY) -+ break; -+ offset +=2; -+ nbytes -=2; -+ src++; -+ } -+ flash_command(FLASH_UBRESET, 0, 0, 0); -+ -+ return (byte*)src - buf; -+} -+ -+/*********************************************************************/ -+/* flash_wait utilizes the DQ6, DQ5, and DQ2 polling algorithms */ -+/* described in the flash data book. It can quickly ascertain the */ -+/* operational status of the flash device, and return an */ -+/* appropriate status code (defined in flash.h) */ -+/*********************************************************************/ -+static int flash_wait(WORD sector, int offset, UINT16 data) -+{ -+ volatile UINT16 *flashptr; /* flash window */ -+ UINT16 d1; -+ -+ flashptr = (UINT16 *) flash_get_memptr(sector); -+ -+ if (flashFamily == FLASH_AMD || flashFamily == FLASH_SST) { -+#if defined(_BCM96338_) || defined(CONFIG_BCM96338) -+ do { -+ d1 = flashptr[offset/2]; -+ if (d1 == data) -+ return STATUS_READY; -+ } while (!(d1 & 0x20)); -+ -+ d1 = flashptr[offset/2]; -+ -+ if (d1 != data) { -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return STATUS_TIMEOUT; -+ } -+#else -+ do { -+ d1 = *flashptr; /* read data */ -+ d1 ^= *flashptr; /* read it again and see what toggled */ -+ if (d1 == 0) /* no toggles, nothing's happening */ -+ return STATUS_READY; -+ } while (!(d1 & 0x20)); -+ -+ d1 = *flashptr; /* read data */ -+ d1 ^= *flashptr; /* read it again and see what toggled */ -+ -+ if (d1 != 0) { -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return STATUS_TIMEOUT; -+ } -+#endif -+ } else if (flashFamily == FLASH_INTEL) { -+ flashptr[0] = 0x70; -+ /* Wait for completion */ -+ while(!(*flashptr & 0x80)); -+ if (*flashptr & 0x30) { -+ flashptr[0] = 0x50; -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return STATUS_TIMEOUT; -+ } -+ flashptr[0] = 0x50; -+ flash_command(FLASH_RESET, 0, 0, 0); -+ } -+ -+ return STATUS_READY; -+} -+ -+/*********************************************************************/ -+/* flash_get_device_id() will perform an autoselect sequence on the */ -+/* flash device, and return the device id of the component. */ -+/* This function automatically resets to read mode. */ -+/*********************************************************************/ -+static UINT16 flash_get_device_id() -+{ -+ volatile UINT16 *fwp; /* flash window */ -+ UINT16 answer; -+ -+ fwp = (UINT16 *)flash_get_memptr(0); -+ -+ flash_command(FLASH_READ_ID, 0, 0, 0); -+ answer = *(fwp + 1); -+ if (answer == ID_AM29LV320M) { -+ answer = *(fwp + 0xe); -+ answer = *(fwp + 0xf); -+ } -+ -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return( (UINT16) answer ); -+} -+ -+/*********************************************************************/ -+/* flash_get_cfi() is the main CFI workhorse function. Due to it's */ -+/* complexity and size it need only be called once upon */ -+/* initializing the flash system. Once it is called, all operations */ -+/* are performed by looking at the meminfo structure. */ -+/* All possible care was made to make this algorithm as efficient as */ -+/* possible. 90% of all operations are memory reads, and all */ -+/* calculations are done using bit-shifts when possible */ -+/*********************************************************************/ -+static int flash_get_cfi(struct cfi_query *query, UINT16 *cfi_struct, int flashFamily) -+{ -+ volatile UINT16 *fwp; /* flash window */ -+ int i=0; -+ -+ flash_command(FLASH_CFIQUERY, 0, 0, 0); -+ -+ if (cfi_struct == 0) -+ fwp = (UINT16 *)flash_get_memptr(0); -+ else -+ fwp = cfi_struct; -+ -+ /* Initial house-cleaning */ -+ for(i=0; i < 8; i++) { -+ query->erase_block[i].sector_size = 0; -+ query->erase_block[i].num_sectors = 0; -+ } -+ -+ /* If not 'QRY', then we dont have a CFI enabled device in the socket */ -+ if( fwp[0x10] != 'Q' && -+ fwp[0x11] != 'R' && -+ fwp[0x12] != 'Y') { -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return(-1); -+ } -+ -+ query->num_erase_blocks = fwp[0x2C]; -+ if(flashFamily == FLASH_SST) -+ query->num_erase_blocks = 1; -+ -+ for(i=0; i < query->num_erase_blocks; i++) { -+ query->erase_block[i].num_sectors = fwp[(0x2D+(4*i))] + (fwp[0x2E + (4*i)] << 8); -+ query->erase_block[i].num_sectors++; -+ query->erase_block[i].sector_size = 256 * (256 * fwp[(0x30+(4*i))] + fwp[(0x2F+(4*i))]); -+ } -+ -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return(1); -+} -diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/cfiflash.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/cfiflash.h ---- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/cfiflash.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/cfiflash.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,150 @@ -+/************************************************************************/ -+/* */ -+/* AMD CFI Enabled Flash Memory Drivers */ -+/* File name: CFIFLASH.H */ -+/* Revision: 1.0 5/07/98 */ -+/* */ -+/* Copyright (c) 1998 ADVANCED MICRO DEVICES, INC. All Rights Reserved. */ -+/* This software is unpublished and contains the trade secrets and */ -+/* confidential proprietary information of AMD. Unless otherwise */ -+/* provided in the Software Agreement associated herewith, it is */ -+/* licensed in confidence "AS IS" and is not to be reproduced in whole */ -+/* or part by any means except for backup. Use, duplication, or */ -+/* disclosure by the Government is subject to the restrictions in */ -+/* paragraph (b) (3) (B) of the Rights in Technical Data and Computer */ -+/* Software clause in DFAR 52.227-7013 (a) (Oct 1988). */ -+/* Software owned by */ -+/* Advanced Micro Devices, Inc., */ -+/* One AMD Place, */ -+/* P.O. Box 3453 */ -+/* Sunnyvale, CA 94088-3453. */ -+/************************************************************************/ -+/* This software constitutes a basic shell of source code for */ -+/* programming all AMD Flash components. AMD */ -+/* will not be responsible for misuse or illegal use of this */ -+/* software for devices not supported herein. AMD is providing */ -+/* this source code "AS IS" and will not be responsible for */ -+/* issues arising from incorrect user implementation of the */ -+/* source code herein. It is the user's responsibility to */ -+/* properly design-in this source code. */ -+/* */ -+/************************************************************************/ -+#ifndef _CFIFLASH_H -+#define _CFIFLASH_H -+ -+#if defined __cplusplus -+extern "C" { -+#endif -+ -+/* include board/CPU specific definitions */ -+#include "bcmtypes.h" -+#include "board.h" -+ -+#define FLASH_BASE_ADDR_REG FLASH_BASE -+ -+#ifndef NULL -+#define NULL 0 -+#endif -+ -+#define MAXSECTORS 1024 /* maximum number of sectors supported */ -+ -+/* A structure for identifying a flash part. There is one for each -+ * of the flash part definitions. We need to keep track of the -+ * sector organization, the address register used, and the size -+ * of the sectors. -+ */ -+struct flashinfo { -+ char *name; /* "Am29DL800T", etc. */ -+ unsigned long addr; /* physical address, once translated */ -+ int areg; /* Can be set to zero for all parts */ -+ int nsect; /* # of sectors -- 19 in LV, 22 in DL */ -+ int bank1start; /* first sector # in bank 1 */ -+ int bank2start; /* first sector # in bank 2, if DL part */ -+ struct { -+ long size; /* # of bytes in this sector */ -+ long base; /* offset from beginning of device */ -+ int bank; /* 1 or 2 for DL; 1 for LV */ -+ } sec[MAXSECTORS]; /* per-sector info */ -+}; -+ -+/* -+ * This structure holds all CFI query information as defined -+ * in the JEDEC standard. All information up to -+ * primary_extended_query is standard among all manufactures -+ * with CFI enabled devices. -+ */ -+ -+struct cfi_query { -+ int num_erase_blocks; /* Number of sector defs. */ -+ struct { -+ unsigned long sector_size; /* byte size of sector */ -+ int num_sectors; /* Num sectors of this size */ -+ } erase_block[8]; /* Max of 256, but 8 is good */ -+}; -+ -+/* Standard Boolean declarations */ -+#define TRUE 1 -+#define FALSE 0 -+ -+/* Define different type of flash */ -+#define FLASH_UNDEFINED 0 -+#define FLASH_AMD 1 -+#define FLASH_INTEL 2 -+#define FLASH_SST 3 -+ -+/* Command codes for the flash_command routine */ -+#define FLASH_RESET 0 /* reset to read mode */ -+#define FLASH_READ_ID 1 /* read device ID */ -+#define FLASH_CFIQUERY 2 /* CFI query */ -+#define FLASH_UB 3 /* go into unlock bypass mode */ -+#define FLASH_PROG 4 /* program a word */ -+#define FLASH_UBRESET 5 /* reset to read mode from unlock bypass mode */ -+#define FLASH_SERASE 6 /* sector erase */ -+ -+/* Return codes from flash_status */ -+#define STATUS_READY 0 /* ready for action */ -+#define STATUS_TIMEOUT 1 /* operation timed out */ -+ -+/* A list of AMD compatible device ID's - add others as needed */ -+#define ID_AM29DL800T 0x224A -+#define ID_AM29DL800B 0x22CB -+#define ID_AM29LV800T 0x22DA -+#define ID_AM29LV800B 0x225B -+#define ID_AM29LV400B 0x22BA -+ -+#define ID_AM29LV160B 0x2249 -+#define ID_AM29LV160T 0x22C4 -+ -+#define ID_AM29LV320T 0x22F6 -+#define ID_MX29LV320AT 0x22A7 -+#define ID_AM29LV320B 0x22F9 -+#define ID_MX29LV320AB 0x22A8 -+ -+#define ID_AM29LV320M 0x227E -+#define ID_AM29LV320MB 0x2200 -+#define ID_AM29LV320MT 0x2201 -+ -+#define ID_SST39VF1601 0x234B -+#define ID_SST39VF3201 0x235B -+ -+/* A list of Intel compatible device ID's - add others as needed */ -+#define ID_I28F160C3T 0x88C2 -+#define ID_I28F160C3B 0x88C3 -+#define ID_I28F320C3T 0x88C4 -+#define ID_I28F320C3B 0x88C5 -+ -+extern byte flash_init(void); -+extern int flash_write_buf(WORD sector, int offset, byte *buffer, int numbytes); -+extern int flash_read_buf(WORD sector, int offset, byte *buffer, int numbytes); -+extern byte flash_sector_erase_int(WORD sector); -+extern int flash_get_numsectors(void); -+extern int flash_get_sector_size(WORD sector); -+extern int flash_get_total_size(void); -+extern unsigned char *flash_get_memptr(WORD sector); -+extern int flash_get_blk(int addr); -+ -+#if defined __cplusplus -+} -+#endif -+ -+#endif -diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/Makefile linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/Makefile ---- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/Makefile 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,17 @@ -+# Makefile for the bcm963xx board drivers -+# -+ -+ -+obj-y := board.o cfiflash.o bcm63xx_flash.o bcm63xx_led.o -+ -+EXTRA_CFLAGS += -I. -I$(INC_BRCMBOARDPARMS_PATH)/$(BRCM_BOARD) -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD) -+ -+ifeq ($(strip $(WIRELESS)),1) -+ EXTRA_CFLAGS += -DWIRELESS -+endif -+ -+-include $(TOPDIR)/Rules.make -+ -+clean: -+ rm -f core *.o *.a *.s -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/bcm63xx_flash.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/bcm63xx_flash.c ---- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/bcm63xx_flash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/bcm63xx_flash.c 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,775 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ *************************************************************************** -+ * File Name : bcm63xx_flash.c -+ * -+ * Description: This file contains the flash device driver APIs for bcm63xx board. -+ * -+ * Created on : 8/10/2002 seanl: use cfiflash.c, cfliflash.h (AMD specific) -+ * -+ ***************************************************************************/ -+ -+ -+/* Includes. */ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#define BCMTAG_EXE_USE -+#include -+#include "cfiflash.h" -+#include "boardparms.h" -+ -+//#define DEBUG_FLASH -+ -+static FLASH_ADDR_INFO fInfo; -+static int flashInitialized = 0; -+ -+void *retriedKmalloc(size_t size) -+{ -+ void *pBuf; -+ int tryCount = 0; -+ -+ // try 1000 times before quit -+ while (((pBuf = kmalloc(size, GFP_KERNEL)) == NULL) && (tryCount++ < 1000)) -+ { -+ current->state = TASK_INTERRUPTIBLE; -+ schedule_timeout(HZ/10); -+ } -+ if (tryCount >= 1000) -+ pBuf = NULL; -+ else -+ memset(pBuf, 0, size); -+ -+ return pBuf; -+} -+ -+void retriedKfree(void *pBuf) -+{ -+ kfree(pBuf); -+} -+ -+/*************************************************************************** -+// Function Name: getCrc32 -+// Description : caculate the CRC 32 of the given data. -+// Parameters : pdata - array of data. -+// size - number of input data bytes. -+// crc - either CRC32_INIT_VALUE or previous return value. -+// Returns : crc. -+****************************************************************************/ -+UINT32 getCrc32(byte *pdata, UINT32 size, UINT32 crc) -+{ -+ while (size-- > 0) -+ crc = (crc >> 8) ^ Crc32_table[(crc ^ *pdata++) & 0xff]; -+ -+ return crc; -+} -+ -+// get the nvram start addr -+// -+unsigned long get_nvram_start_addr(void) -+{ -+ return ((unsigned long) -+ (flash_get_memptr(fInfo.flash_nvram_start_blk) + fInfo.flash_nvram_blk_offset)); -+} -+ -+// get the scratch_pad start addr -+// -+unsigned long get_scratch_pad_start_addr(void) -+{ -+ return ((unsigned long) -+ (flash_get_memptr(fInfo.flash_scratch_pad_start_blk) + fInfo.flash_scratch_pad_blk_offset)); -+} -+ -+ -+ -+/* ********************************************************************* -+ * kerSysImageTagGet() -+ * Get the image tag -+ * Input parameters: -+ * none -+ * Return value: -+ * point to tag -- Found -+ * NULL -- failed -+ ********************************************************************* */ -+PFILE_TAG kerSysImageTagGet(void) -+{ -+ int i; -+ int totalBlks = flash_get_numsectors(); -+ UINT32 crc; -+ unsigned char *sectAddr; -+ PFILE_TAG pTag; -+ -+#if defined(DEBUG_FLASH) -+ printk("totalblks in tagGet=%d\n", totalBlks); -+#endif -+ -+ // start from 2nd blk, assume 1st one is always CFE -+ for (i = 1; i < totalBlks; i++) -+ { -+ sectAddr = flash_get_memptr((byte) i); -+ crc = CRC32_INIT_VALUE; -+ crc = getCrc32(sectAddr, (UINT32)TAG_LEN-TOKEN_LEN, crc); -+ pTag = (PFILE_TAG) sectAddr; -+ -+#if defined(DEBUG_FLASH) -+ printk("Check Tag crc on blk [%d]\n", i); -+#endif -+ -+ if (crc == (UINT32)(*(UINT32*)(pTag->tagValidationToken))) -+ return pTag; -+ } -+ -+ return (PFILE_TAG) NULL; -+} -+ -+// Initialize the flash and fill out the fInfo structure -+void kerSysFlashInit( void ) -+{ -+ int i = 0; -+ int totalBlks = 0; -+ int totalSize = 0; -+ int startAddr = 0; -+ int usedBlkSize = 0; -+ NVRAM_DATA nvramData; -+ UINT32 crc = CRC32_INIT_VALUE, savedCrc; -+ PFILE_TAG pTag = NULL; -+ unsigned long kernelEndAddr = 0; -+ unsigned long spAddr = 0; -+ -+ if (flashInitialized) -+ return; -+ -+ flashInitialized = 1; -+ flash_init(); -+ -+ totalBlks = flash_get_numsectors(); -+ totalSize = flash_get_total_size(); -+ -+ printk("Total Flash size: %dK with %d sectors\n", totalSize/1024, totalBlks); -+ -+ /* nvram is always at the end of flash */ -+ fInfo.flash_nvram_length = FLASH45_LENGTH_NVRAM; -+ fInfo.flash_nvram_start_blk = 0; /* always the first block */ -+ fInfo.flash_nvram_number_blk = 1; /*always fits in the first block */ -+ fInfo.flash_nvram_blk_offset = NVRAM_DATA_OFFSET; -+ -+ // check nvram CRC -+ memcpy((char *)&nvramData, (char *)get_nvram_start_addr(), sizeof(NVRAM_DATA)); -+ savedCrc = nvramData.ulCheckSum; -+ nvramData.ulCheckSum = 0; -+ crc = getCrc32((char *)&nvramData, (UINT32) sizeof(NVRAM_DATA), crc); -+ -+ BpSetBoardId( nvramData.szBoardId ); -+ -+ fInfo.flash_persistent_length = NVRAM_PSI_DEFAULT; -+ if (savedCrc != crc) -+ { -+ printk("***Board is not initialized****: Using the default PSI size: %d\n", -+ fInfo.flash_persistent_length); -+ } -+ else -+ { -+ unsigned long ulPsiSize; -+ if( BpGetPsiSize( &ulPsiSize ) == BP_SUCCESS ) -+ fInfo.flash_persistent_length = ulPsiSize; -+ else -+ { -+ printk("***Board id is not set****: Using the default PSI size: %d\n", -+ fInfo.flash_persistent_length); -+ } -+ } -+ -+ fInfo.flash_persistent_length *= ONEK; -+ startAddr = totalSize - fInfo.flash_persistent_length; -+ fInfo.flash_persistent_start_blk = flash_get_blk(startAddr+FLASH_BASE_ADDR_REG); -+ fInfo.flash_persistent_number_blk = totalBlks - fInfo.flash_persistent_start_blk; -+ // save abs SP address (Scratch Pad). it is before PSI -+ spAddr = startAddr - SP_MAX_LEN ; -+ // find out the offset in the start_blk -+ usedBlkSize = 0; -+ for (i = fInfo.flash_persistent_start_blk; -+ i < (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk); i++) -+ { -+ usedBlkSize += flash_get_sector_size((byte) i); -+ } -+ fInfo.flash_persistent_blk_offset = usedBlkSize - fInfo.flash_persistent_length; -+ -+ // get the info for sp -+ if (!(pTag = kerSysImageTagGet())) -+ { -+ printk("Failed to read image tag from flash\n"); -+ return; -+ } -+ kernelEndAddr = (unsigned long) simple_strtoul(pTag->kernelAddress, NULL, 10) + \ -+ (unsigned long) simple_strtoul(pTag->kernelLen, NULL, 10); -+ -+ // make suer sp does not share kernel block -+ fInfo.flash_scratch_pad_start_blk = flash_get_blk(spAddr+FLASH_BASE_ADDR_REG); -+ if (fInfo.flash_scratch_pad_start_blk != flash_get_blk(kernelEndAddr)) -+ { -+ fInfo.flash_scratch_pad_length = SP_MAX_LEN; -+ if (fInfo.flash_persistent_start_blk == fInfo.flash_scratch_pad_start_blk) // share blk -+ { -+#if 1 /* do not used scratch pad unless it's in its own sector */ -+ printk("Scratch pad is not used for this flash part.\n"); -+ fInfo.flash_scratch_pad_length = 0; // no sp -+#else /* allow scratch pad to share a sector with another section such as PSI */ -+ fInfo.flash_scratch_pad_number_blk = 1; -+ fInfo.flash_scratch_pad_blk_offset = fInfo.flash_persistent_blk_offset - fInfo.flash_scratch_pad_length; -+#endif -+ } -+ else // on different blk -+ { -+ fInfo.flash_scratch_pad_number_blk = fInfo.flash_persistent_start_blk\ -+ - fInfo.flash_scratch_pad_start_blk; -+ // find out the offset in the start_blk -+ usedBlkSize = 0; -+ for (i = fInfo.flash_scratch_pad_start_blk; -+ i < (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk); i++) -+ usedBlkSize += flash_get_sector_size((byte) i); -+ fInfo.flash_scratch_pad_blk_offset = usedBlkSize - fInfo.flash_scratch_pad_length; -+ } -+ } -+ else -+ { -+ printk("No flash for scratch pad!\n"); -+ fInfo.flash_scratch_pad_length = 0; // no sp -+ } -+ -+#if defined(DEBUG_FLASH) -+ printk("fInfo.flash_scratch_pad_start_blk = %d\n", fInfo.flash_scratch_pad_start_blk); -+ printk("fInfo.flash_scratch_pad_number_blk = %d\n", fInfo.flash_scratch_pad_number_blk); -+ printk("fInfo.flash_scratch_pad_length = 0x%x\n", fInfo.flash_scratch_pad_length); -+ printk("fInfo.flash_scratch_pad_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_scratch_pad_blk_offset); -+ -+ printk("fInfo.flash_nvram_start_blk = %d\n", fInfo.flash_nvram_start_blk); -+ printk("fInfo.flash_nvram_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_nvram_blk_offset); -+ printk("fInfo.flash_nvram_number_blk = %d\n", fInfo.flash_nvram_number_blk); -+ -+ printk("psi startAddr = %x\n", startAddr+FLASH_BASE_ADDR_REG); -+ printk("fInfo.flash_persistent_start_blk = %d\n", fInfo.flash_persistent_start_blk); -+ printk("fInfo.flash_persistent_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_persistent_blk_offset); -+ printk("fInfo.flash_persistent_number_blk = %d\n", fInfo.flash_persistent_number_blk); -+#endif -+ -+} -+ -+ -+ -+/*********************************************************************** -+ * Function Name: kerSysFlashAddrInfoGet -+ * Description : Fills in a structure with information about the NVRAM -+ * and persistent storage sections of flash memory. -+ * Fro physmap.c to mount the fs vol. -+ * Returns : None. -+ ***********************************************************************/ -+void kerSysFlashAddrInfoGet(PFLASH_ADDR_INFO pflash_addr_info) -+{ -+ pflash_addr_info->flash_nvram_blk_offset = fInfo.flash_nvram_blk_offset; -+ pflash_addr_info->flash_nvram_length = fInfo.flash_nvram_length; -+ pflash_addr_info->flash_nvram_number_blk = fInfo.flash_nvram_number_blk; -+ pflash_addr_info->flash_nvram_start_blk = fInfo.flash_nvram_start_blk; -+ pflash_addr_info->flash_persistent_blk_offset = fInfo.flash_persistent_blk_offset; -+ pflash_addr_info->flash_persistent_length = fInfo.flash_persistent_length; -+ pflash_addr_info->flash_persistent_number_blk = fInfo.flash_persistent_number_blk; -+ pflash_addr_info->flash_persistent_start_blk = fInfo.flash_persistent_start_blk; -+} -+ -+ -+// get shared blks into *** pTempBuf *** which has to be released bye the caller! -+// return: if pTempBuf != NULL, poits to the data with the dataSize of the buffer -+// !NULL -- ok -+// NULL -- fail -+static char *getSharedBlks(int start_blk, int end_blk) -+{ -+ int i = 0; -+ int usedBlkSize = 0; -+ int sect_size = 0; -+ char *pTempBuf = NULL; -+ char *pBuf = NULL; -+ -+ for (i = start_blk; i < end_blk; i++) -+ usedBlkSize += flash_get_sector_size((byte) i); -+ -+#if defined(DEBUG_FLASH) -+ printk("usedBlkSize = %d\n", usedBlkSize); -+#endif -+ -+ if ((pTempBuf = (char *) retriedKmalloc(usedBlkSize)) == NULL) -+ { -+ printk("failed to allocate memory with size: %d\n", usedBlkSize); -+ return pTempBuf; -+ } -+ -+ pBuf = pTempBuf; -+ for (i = start_blk; i < end_blk; i++) -+ { -+ sect_size = flash_get_sector_size((byte) i); -+ -+#if defined(DEBUG_FLASH) -+ printk("i = %d, sect_size = %d, end_blk = %d\n", i, sect_size, end_blk); -+#endif -+ flash_read_buf((byte)i, 0, pBuf, sect_size); -+ pBuf += sect_size; -+ } -+ -+ return pTempBuf; -+} -+ -+ -+ -+// Set the pTempBuf to flash from start_blk to end_blk -+// return: -+// 0 -- ok -+// -1 -- fail -+static int setSharedBlks(int start_blk, int end_blk, char *pTempBuf) -+{ -+ int i = 0; -+ int sect_size = 0; -+ int sts = 0; -+ char *pBuf = pTempBuf; -+ -+ for (i = start_blk; i < end_blk; i++) -+ { -+ sect_size = flash_get_sector_size((byte) i); -+ flash_sector_erase_int(i); -+ if (flash_write_buf(i, 0, pBuf, sect_size) != sect_size) -+ { -+ printk("Error writing flash sector %d.", i); -+ sts = -1; -+ break; -+ } -+ pBuf += sect_size; -+ } -+ -+ return sts; -+} -+ -+ -+ -+/******************************************************************************* -+ * NVRAM functions -+ *******************************************************************************/ -+ -+// get nvram data -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysNvRamGet(char *string, int strLen, int offset) -+{ -+ char *pBuf = NULL; -+ -+ if (!flashInitialized) -+ kerSysFlashInit(); -+ -+ if (strLen > FLASH45_LENGTH_NVRAM) -+ return -1; -+ -+ if ((pBuf = getSharedBlks(fInfo.flash_nvram_start_blk, -+ (fInfo.flash_nvram_start_blk + fInfo.flash_nvram_number_blk))) == NULL) -+ return -1; -+ -+ // get string off the memory buffer -+ memcpy(string, (pBuf + fInfo.flash_nvram_blk_offset + offset), strLen); -+ -+ retriedKfree(pBuf); -+ -+ return 0; -+} -+ -+ -+// set nvram -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysNvRamSet(char *string, int strLen, int offset) -+{ -+ int sts = 0; -+ char *pBuf = NULL; -+ -+ if (strLen > FLASH45_LENGTH_NVRAM) -+ return -1; -+ -+ if ((pBuf = getSharedBlks(fInfo.flash_nvram_start_blk, -+ (fInfo.flash_nvram_start_blk + fInfo.flash_nvram_number_blk))) == NULL) -+ return -1; -+ -+ // set string to the memory buffer -+ memcpy((pBuf + fInfo.flash_nvram_blk_offset + offset), string, strLen); -+ -+ if (setSharedBlks(fInfo.flash_nvram_start_blk, -+ (fInfo.flash_nvram_number_blk + fInfo.flash_nvram_start_blk), pBuf) != 0) -+ sts = -1; -+ -+ retriedKfree(pBuf); -+ -+ return sts; -+} -+ -+ -+/*********************************************************************** -+ * Function Name: kerSysEraseNvRam -+ * Description : Erase the NVRAM storage section of flash memory. -+ * Returns : 1 -- ok, 0 -- fail -+ ***********************************************************************/ -+int kerSysEraseNvRam(void) -+{ -+ int sts = 1; -+ char *tempStorage = retriedKmalloc(FLASH45_LENGTH_NVRAM); -+ -+ // just write the whole buf with '0xff' to the flash -+ if (!tempStorage) -+ sts = 0; -+ else -+ { -+ memset(tempStorage, 0xff, FLASH45_LENGTH_NVRAM); -+ if (kerSysNvRamSet(tempStorage, FLASH45_LENGTH_NVRAM, 0) != 0) -+ sts = 0; -+ retriedKfree(tempStorage); -+ } -+ -+ return sts; -+} -+ -+ -+/******************************************************************************* -+ * PSI functions -+ *******************************************************************************/ -+// get psi data -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysPersistentGet(char *string, int strLen, int offset) -+{ -+ char *pBuf = NULL; -+ -+ if (strLen > fInfo.flash_persistent_length) -+ return -1; -+ -+ if ((pBuf = getSharedBlks(fInfo.flash_persistent_start_blk, -+ (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk))) == NULL) -+ return -1; -+ -+ // get string off the memory buffer -+ memcpy(string, (pBuf + fInfo.flash_persistent_blk_offset + offset), strLen); -+ -+ retriedKfree(pBuf); -+ -+ return 0; -+} -+ -+ -+// set psi -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysPersistentSet(char *string, int strLen, int offset) -+{ -+ int sts = 0; -+ char *pBuf = NULL; -+ -+ if (strLen > fInfo.flash_persistent_length) -+ return -1; -+ -+ if ((pBuf = getSharedBlks(fInfo.flash_persistent_start_blk, -+ (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk))) == NULL) -+ return -1; -+ -+ // set string to the memory buffer -+ memcpy((pBuf + fInfo.flash_persistent_blk_offset + offset), string, strLen); -+ -+ if (setSharedBlks(fInfo.flash_persistent_start_blk, -+ (fInfo.flash_persistent_number_blk + fInfo.flash_persistent_start_blk), pBuf) != 0) -+ sts = -1; -+ -+ retriedKfree(pBuf); -+ -+ return sts; -+} -+ -+ -+// flash bcm image -+// return: -+// 0 - ok -+// !0 - the sector number fail to be flashed (should not be 0) -+int kerSysBcmImageSet( int flash_start_addr, char *string, int size) -+{ -+ int sts; -+ int sect_size; -+ int blk_start; -+ int i; -+ char *pTempBuf = NULL; -+ int whole_image = 0; -+ -+ blk_start = flash_get_blk(flash_start_addr); -+ if( blk_start < 0 ) -+ return( -1 ); -+ -+ if (flash_start_addr == FLASH_BASE && size > FLASH45_LENGTH_BOOT_ROM) -+ whole_image = 1; -+ -+ /* write image to flash memory */ -+ do -+ { -+ sect_size = flash_get_sector_size(blk_start); -+// NOTE: for memory problem in multiple PVC configuration, temporary get rid of kmalloc this 64K for now. -+// if ((pTempBuf = (char *)retriedKmalloc(sect_size)) == NULL) -+// { -+// printk("Failed to allocate memory with size: %d. Reset the router...\n", sect_size); -+// kerSysMipsSoftReset(); // reset the board right away. -+// } -+ // for whole image, no check on psi -+ if (!whole_image && blk_start == fInfo.flash_persistent_start_blk) // share the blk with psi -+ { -+ if (size > (sect_size - fInfo.flash_persistent_length)) -+ { -+ printk("Image is too big\n"); -+ break; // image is too big. Can not overwrite to nvram -+ } -+ if ((pTempBuf = (char *)retriedKmalloc(sect_size)) == NULL) -+ { -+ printk("Failed to allocate memory with size: %d. Reset the router...\n", sect_size); -+ kerSysMipsSoftReset(); // reset the board right away. -+ } -+ flash_read_buf((byte)blk_start, 0, pTempBuf, sect_size); -+ if (copy_from_user((void *)pTempBuf,(void *)string, size) != 0) -+ break; // failed ? -+ flash_sector_erase_int(blk_start); // erase blk before flash -+ if (flash_write_buf(blk_start, 0, pTempBuf, sect_size) == sect_size) -+ size = 0; // break out and say all is ok -+ retriedKfree(pTempBuf); -+ break; -+ } -+ -+ flash_sector_erase_int(blk_start); // erase blk before flash -+ -+ if (sect_size > size) -+ { -+ if (size & 1) -+ size++; -+ sect_size = size; -+ } -+ -+ if ((i = flash_write_buf(blk_start, 0, string, sect_size)) != sect_size) { -+ break; -+ } -+ blk_start++; -+ string += sect_size; -+ size -= sect_size; -+ } while (size > 0); -+ -+ if (whole_image) -+ { -+ // If flashing a whole image, erase to end of flash. -+ int total_blks = flash_get_numsectors(); -+ while( blk_start < total_blks ) -+ { -+ flash_sector_erase_int(blk_start); -+ blk_start++; -+ } -+ } -+ if (pTempBuf) -+ retriedKfree(pTempBuf); -+ -+ if( size == 0 ) -+ sts = 0; // ok -+ else -+ sts = blk_start; // failed to flash this sector -+ -+ return sts; -+} -+ -+/******************************************************************************* -+ * SP functions -+ *******************************************************************************/ -+// get sp data. NOTE: memcpy work here -- not using copy_from/to_user -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysScratchPadGet(char *tokenId, char *tokBuf, int bufLen) -+{ -+ PSP_HEADER pHead = NULL; -+ PSP_TOKEN pToken = NULL; -+ char *pBuf = NULL; -+ char *pShareBuf = NULL; -+ char *startPtr = NULL; -+ char *endPtr = NULL; -+ char *spEndPtr = NULL; -+ int sts = -1; -+ -+ if (fInfo.flash_scratch_pad_length == 0) -+ return sts; -+ -+ if (bufLen >= (fInfo.flash_scratch_pad_length - sizeof(SP_HEADER) - sizeof(SP_TOKEN))) -+ { -+ printk("Exceed scratch pad space by %d\n", bufLen - fInfo.flash_scratch_pad_length \ -+ - sizeof(SP_HEADER) - sizeof(SP_TOKEN)); -+ return sts; -+ } -+ -+ if ((pShareBuf = getSharedBlks(fInfo.flash_scratch_pad_start_blk, -+ (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk))) == NULL) -+ return sts; -+ -+ // pBuf points to SP buf -+ pBuf = pShareBuf + fInfo.flash_scratch_pad_blk_offset; -+ -+ pHead = (PSP_HEADER) pBuf; -+ if (memcmp(pHead->SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN) != 0) -+ { -+ printk("Scrap pad is not initialized.\n"); -+ return sts; -+ } -+ -+ // search up to SPUsedLen for the token -+ startPtr = pBuf + sizeof(SP_HEADER); -+ endPtr = pBuf + pHead->SPUsedLen; -+ spEndPtr = pBuf + SP_MAX_LEN; -+ while (startPtr < endPtr && startPtr < spEndPtr) -+ { -+ pToken = (PSP_TOKEN) startPtr; -+ if (strncmp(pToken->tokenName, tokenId, TOKEN_NAME_LEN) == 0) -+ { -+ memcpy(tokBuf, startPtr + sizeof(SP_TOKEN), bufLen); -+ sts = 0; -+ break; -+ } -+ // get next token -+ startPtr += sizeof(SP_TOKEN) + pToken->tokenLen; -+ } -+ -+ retriedKfree(pShareBuf); -+ -+ return sts; -+} -+ -+ -+// set sp. NOTE: memcpy work here -- not using copy_from/to_user -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysScratchPadSet(char *tokenId, char *tokBuf, int bufLen) -+{ -+ PSP_TOKEN pToken = NULL; -+ PSP_HEADER pHead = NULL; -+ char *pShareBuf = NULL; -+ char *pBuf = NULL; -+ SP_HEADER SPHead; -+ SP_TOKEN SPToken; -+ char *curPtr; -+ int sts = -1; -+ -+ if (fInfo.flash_scratch_pad_length == 0) -+ return sts; -+ -+ if (bufLen >= (fInfo.flash_scratch_pad_length - sizeof(SP_HEADER) - sizeof(SP_TOKEN))) -+ { -+ printk("Exceed scratch pad space by %d\n", bufLen - fInfo.flash_scratch_pad_length \ -+ - sizeof(SP_HEADER) - sizeof(SP_TOKEN)); -+ return sts; -+ } -+ -+ if ((pShareBuf = getSharedBlks(fInfo.flash_scratch_pad_start_blk, -+ (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk))) == NULL) -+ return sts; -+ -+ // pBuf points to SP buf -+ pBuf = pShareBuf + fInfo.flash_scratch_pad_blk_offset; -+ pHead = (PSP_HEADER) pBuf; -+ -+ // form header info. SPUsedLen later on... -+ memset((char *)&SPHead, 0, sizeof(SP_HEADER)); -+ memcpy(SPHead.SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN); -+ SPHead.SPVersion = SP_VERSION; -+ -+ // form token info. -+ memset((char*)&SPToken, 0, sizeof(SP_TOKEN)); -+ strncpy(SPToken.tokenName, tokenId, TOKEN_NAME_LEN - 1); -+ SPToken.tokenLen = bufLen; -+ if (memcmp(pHead->SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN) != 0) -+ { -+ // new sp, so just flash the token -+ printk("No Scrap pad found. Initialize scratch pad...\n"); -+ SPHead.SPUsedLen = sizeof(SP_HEADER) + sizeof(SP_TOKEN) + bufLen; -+ memcpy(pBuf, (char *)&SPHead, sizeof(SP_HEADER)); -+ curPtr = pBuf + sizeof(SP_HEADER); -+ memcpy(curPtr, (char *)&SPToken, sizeof(SP_TOKEN)); -+ curPtr += sizeof(SP_TOKEN); -+ memcpy(curPtr, tokBuf, bufLen); -+ } -+ else -+ { -+ // need search for the token, if exist with same size overwrite it. if sizes differ, -+ // move over the later token data over and put the new one at the end -+ char *endPtr = pBuf + pHead->SPUsedLen; -+ char *spEndPtr = pBuf + SP_MAX_LEN; -+ curPtr = pBuf + sizeof(SP_HEADER); -+ while (curPtr < endPtr && curPtr < spEndPtr) -+ { -+ pToken = (PSP_TOKEN) curPtr; -+ if (strncmp(pToken->tokenName, tokenId, TOKEN_NAME_LEN) == 0) -+ { -+ if (pToken->tokenLen == bufLen) // overwirte it -+ { -+ memcpy((curPtr+sizeof(SP_TOKEN)), tokBuf, bufLen); -+ break; -+ } -+ else // move later data over and put the new token at the end -+ { -+ memcpy((curPtr+sizeof(SP_TOKEN)), tokBuf, bufLen); // ~~~ -+ break; -+ } -+ } -+ else // not same token ~~~ -+ { -+ } -+ // get next token -+ curPtr += sizeof(SP_TOKEN) + pToken->tokenLen; -+ } // end while -+ SPHead.SPUsedLen = sizeof(SP_HEADER) + sizeof(SP_TOKEN) + bufLen; // ~~~ -+ if (SPHead.SPUsedLen > SP_MAX_LEN) -+ { -+ printk("No more Scratch pad space left! Over limit by %d bytes\n", SPHead.SPUsedLen - SP_MAX_LEN); -+ return sts; -+ } -+ -+ } // else if not new sp -+ -+ sts = setSharedBlks(fInfo.flash_scratch_pad_start_blk, -+ (fInfo.flash_scratch_pad_number_blk + fInfo.flash_scratch_pad_start_blk), pShareBuf); -+ -+ retriedKfree(pShareBuf); -+ -+ return sts; -+ -+ -+} -+ -+int kerSysFlashSizeGet(void) -+{ -+ return flash_get_total_size(); -+} -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/bcm63xx_led.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/bcm63xx_led.c ---- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/bcm63xx_led.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/bcm63xx_led.c 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,582 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/*************************************************************************** -+ * File Name : bcm63xx_led.c -+ * -+ * Description: -+ * -+ * This file contains bcm963xx board led control API functions. -+ * -+ * To use it, do the following -+ * -+ * 1). define in the board.c the following led mappping (this is for 6345GW board): -+ * const LED_MAP_PAIR cLedMapping45GW[] = -+ * { // led name Initial state physical pin (ledMask) -+ * {kLedUsb, kLedStateOff, GPIO_LED_PIN_7}, -+ * {kLedAdsl, kLedStateOff, GPIO_LED_PIN_8}, -+ * {kLedPPP, kLedStateOff, GPIO_LED_PIN_9}, // PPP and WanData share PIN_9 -+ * {kLedWanData, kLedStateOff, GPIO_LED_PIN_9}, -+ * {kLedWireless, kLedStateOff, GPIO_LED_PIN_10}, -+ * {kLedEnd, kLedStateOff, 0 } // NOTE: kLedEnd has to be at the end. -+ * -+ * 2). };To initialize led API and initial state of the leds, call the following function with the mapping -+ * pointer from the above struct -+ * -+ * boardLedInit((PLED_MAP_PAIR) &cLedMapping45R); -+ * -+ * 3). Sample call for kernel mode: -+ * -+ * kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board.h -+ * -+ * 4). Sample call for user mode -+ * -+ * sysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board_api.h -+ * -+ * -+ * Created on : 10/28/2002 seanl -+ * -+ ***************************************************************************/ -+ -+/* Includes. */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#define k100ms (HZ / 10) // ~100 ms -+#define kFastBlinkCount 0 // ~100ms -+#define kSlowBlinkCount 5 // ~600ms -+ -+#define MAX_VIRT_LEDS 12 -+ -+// uncomment // for debug led -+//#define DEBUG_LED -+ -+// global variables: -+struct timer_list gLedTimer; -+int gTimerOn = FALSE; -+int gLedCount = 0; -+ -+typedef struct ledinfo -+{ -+ unsigned short ledMask; // mask for led: ie. giop 10 = 0x0400 -+ unsigned short ledActiveLow; // GPIO bit reset to turn on LED -+ unsigned short ledMaskFail; // mask for led: ie. giop 10 = 0x0400 -+ unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED -+ BOARD_LED_STATE ledState; // current led state -+ BOARD_LED_STATE savedLedState; // used in blink once for restore to the orignal ledState -+ int blinkCountDown; // if == 0, do blink (toggle). Is assgined value and dec by 1 at each timer. -+} LED_INFO, *PLED_INFO; -+ -+static PLED_INFO gLed = NULL; -+static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS]; -+static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS]; -+static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS]; -+ -+#if 0 /* BROKEN */ -+#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) -+static int gLedOffInBridgeMode = 1; -+#elif defined(CONFIG_BCM96345) -+static int gLedOffInBridgeMode = 0; -+#endif -+#endif -+ -+void ledTimerExpire(void); -+int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ); -+ -+//************************************************************************************** -+// LED operations -+//************************************************************************************** -+ -+// turn led on and set the ledState -+void ledOn(PLED_INFO pLed) -+{ -+ if( pLed->ledMask ) -+ { -+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one -+ if( pLed->ledActiveLow ) -+ GPIO->GPIOio &= ~pLed->ledMask; // turn on the led -+ else -+ GPIO->GPIOio |= pLed->ledMask; // turn on the led -+ pLed->ledState = pLed->savedLedState = kLedStateOn; -+ } -+} -+ -+ -+// turn led off and set the ledState -+void ledOff(PLED_INFO pLed) -+{ -+ if( pLed->ledMask ) -+ { -+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one -+ if( pLed->ledActiveLow ) -+ GPIO->GPIOio |= pLed->ledMask; // turn off the led -+ else -+ GPIO->GPIOio &= ~pLed->ledMask; // turn off the led -+ pLed->ledState = pLed->savedLedState = kLedStateOff; -+ } -+} -+ -+// turn led on and set the ledState -+void ledOnFail(PLED_INFO pLed) -+{ -+ if( pLed->ledMaskFail ) -+ { -+ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one -+ if( pLed->ledActiveLowFail ) -+ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn on the led -+ else -+ GPIO->GPIOio |= pLed->ledMaskFail; // turn on the led -+ pLed->ledState = pLed->savedLedState = kLedStateFail; -+ } -+} -+ -+ -+// turn led off and set the ledState -+void ledOffFail(PLED_INFO pLed) -+{ -+ if( pLed->ledMaskFail ) -+ { -+ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one -+ if( pLed->ledActiveLowFail ) -+ GPIO->GPIOio |= pLed->ledMaskFail; // turn off the led -+ else -+ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn off the led -+ pLed->ledState = pLed->savedLedState = kLedStateOff; -+ } -+} -+ -+ -+// toggle the led and return the current ledState -+BOARD_LED_STATE ledToggle(PLED_INFO pLed) -+{ -+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one -+ if (GPIO->GPIOio & pLed->ledMask) -+ { -+ GPIO->GPIOio &= ~(pLed->ledMask); -+ return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff ); -+ } -+ else -+ { -+ GPIO->GPIOio |= pLed->ledMask; -+ return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn ); -+ } -+} -+ -+ -+// led timer. Will return if timer is already on -+void ledTimerStart(void) -+{ -+ if (gTimerOn) -+ return; -+ -+#if defined(DEBUG_LED) -+ printk("led: add_timer\n"); -+#endif -+ -+ init_timer(&gLedTimer); -+ gLedTimer.function = (void*)ledTimerExpire; -+ gLedTimer.expires = jiffies + k100ms; // timer expires in ~100ms -+ add_timer (&gLedTimer); -+ gTimerOn = TRUE; -+} -+ -+ -+// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and -+// restart the timer according to ledState -+void ledTimerExpire(void) -+{ -+ int i; -+ PLED_INFO pCurLed; -+ -+ gTimerOn = FALSE; -+ -+ for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++) -+ { -+#if defined(DEBUG_LED) -+ printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown); -+#endif -+ switch (pCurLed->ledState) -+ { -+ case kLedStateOn: -+ case kLedStateOff: -+ case kLedStateFail: -+ pCurLed->blinkCountDown = 0; // reset the blink count down -+ break; -+ -+ case kLedStateBlinkOnce: -+ ledToggle(pCurLed); -+ pCurLed->blinkCountDown = 0; // reset to 0 -+ pCurLed->ledState = pCurLed->savedLedState; -+ if (pCurLed->ledState == kLedStateSlowBlinkContinues || -+ pCurLed->ledState == kLedStateFastBlinkContinues) -+ ledTimerStart(); // start timer if in blinkContinues stats -+ break; -+ -+ case kLedStateSlowBlinkContinues: -+ if (pCurLed->blinkCountDown-- == 0) -+ { -+ pCurLed->blinkCountDown = kSlowBlinkCount; -+ ledToggle(pCurLed); -+ } -+ ledTimerStart(); -+ break; -+ -+ case kLedStateFastBlinkContinues: -+ if (pCurLed->blinkCountDown-- == 0) -+ { -+ pCurLed->blinkCountDown = kFastBlinkCount; -+ ledToggle(pCurLed); -+ } -+ ledTimerStart(); -+ break; -+ -+ default: -+ printk("Invalid state = %d\n", pCurLed->ledState); -+ } -+ } -+} -+ -+// initialize the gLedCount and allocate and fill gLed struct -+void __init boardLedInit(PLED_MAP_PAIR cLedMapping) -+{ -+ PLED_MAP_PAIR p1, p2; -+ PLED_INFO pCurLed; -+ int needTimer = FALSE; -+ int alreadyUsed = 0; -+ -+#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) -+ /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */ -+ GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK; -+ GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS; -+#endif -+ -+ memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) ); -+ memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) ); -+ memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) ); -+ -+ gLedCount = 0; -+ -+ // Check for multiple LED names and multiple LED GPIO pins that share the -+ // same physical board LED. -+ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) -+ { -+ alreadyUsed = 0; -+ for( p2 = cLedMapping; p2 != p1; p2++ ) -+ { -+ if( (p1->ledMask && p1->ledMask == p2->ledMask) || -+ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) -+ { -+ alreadyUsed = 1; -+ break; -+ } -+ } -+ -+ if( alreadyUsed == 0 ) -+ gLedCount++; -+ } -+ -+ gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL); -+ if( gLed == NULL ) -+ { -+ printk( "LED memory allocation error.\n" ); -+ return; -+ } -+ -+ memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) ); -+ -+ // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led -+ // (ledMask) the first defined led's ledInitState will be used. -+ pCurLed = gLed; -+ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) -+ { -+ if( (int) p1->ledName > MAX_VIRT_LEDS ) -+ continue; -+ -+ alreadyUsed = 0; -+ for( p2 = cLedMapping; p2 != p1; p2++ ) -+ { -+ if( (p1->ledMask && p1->ledMask == p2->ledMask) || -+ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) -+ { -+ alreadyUsed = 1; -+ break; -+ } -+ } -+ -+ if( alreadyUsed == 0 ) -+ { -+ // Initialize the board LED for the first time. -+ needTimer = initLedInfo( p1, pCurLed ); -+ gpVirtLeds[(int) p1->ledName] = pCurLed; -+ pCurLed++; -+ } -+ else -+ { -+ PLED_INFO pLed; -+ for( pLed = gLed; pLed != pCurLed; pLed++ ) -+ { -+ // Find the LED_INFO structure that has already been initialized. -+ if((pLed->ledMask && pLed->ledMask == p1->ledMask) || -+ (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail)) -+ { -+ // The board LED has already been initialized but possibly -+ // not completely initialized. -+ if( p1->ledMask ) -+ { -+ pLed->ledMask = p1->ledMask; -+ pLed->ledActiveLow = p1->ledActiveLow; -+ } -+ if( p1->ledMaskFail ) -+ { -+ pLed->ledMaskFail = p1->ledMaskFail; -+ pLed->ledActiveLowFail = p1->ledActiveLowFail; -+ } -+ gpVirtLeds[(int) p1->ledName] = pLed; -+ break; -+ } -+ } -+ } -+ } -+ -+ if (needTimer) -+ ledTimerStart(); -+ -+#if defined(DEBUG_LED) -+ int i; -+ for (i=0; i < gLedCount; i++) -+ printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState); -+#endif -+ -+} -+ -+// Initialize a structure that contains information about a physical board LED -+// control. The board LED may contain more than one GPIO pin to control a -+// normal condition (green) or a failure condition (red). -+int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ) -+{ -+ int needTimer = FALSE; -+ pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState; -+ pCurLed->ledMask = pCurMap->ledMask; -+ pCurLed->ledActiveLow = pCurMap->ledActiveLow; -+ pCurLed->ledMaskFail = pCurMap->ledMaskFail; -+ pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail; -+ -+ switch (pCurLed->ledState) -+ { -+ case kLedStateOn: -+ pCurLed->blinkCountDown = 0; // reset the blink count down -+ ledOn(pCurLed); -+ break; -+ case kLedStateOff: -+ pCurLed->blinkCountDown = 0; // reset the blink count down -+ ledOff(pCurLed); -+ break; -+ case kLedStateFail: -+ pCurLed->blinkCountDown = 0; // reset the blink count down -+ ledOnFail(pCurLed); -+ break; -+ case kLedStateBlinkOnce: -+ pCurLed->blinkCountDown = 1; -+ needTimer = TRUE; -+ break; -+ case kLedStateSlowBlinkContinues: -+ pCurLed->blinkCountDown = kSlowBlinkCount; -+ needTimer = TRUE; -+ break; -+ case kLedStateFastBlinkContinues: -+ pCurLed->blinkCountDown = kFastBlinkCount; -+ needTimer = TRUE; -+ break; -+ default: -+ printk("Invalid state = %d\n", pCurLed->ledState); -+ } -+ -+ return( needTimer ); -+} -+ -+#if 0 /* BROKEN */ -+// Determines if there is at least one interface in bridge mode. Bridge mode -+// is determined by the cfm convention of naming bridge interfaces nas17 -+// through nas24. -+static int isBridgedProtocol(void) -+{ -+ extern int dev_get(const char *name); -+ const int firstBridgeId = 17; -+ const int lastBridgeId = 24; -+ int i; -+ int ret = FALSE; -+ char name[16]; -+ -+ for( i = firstBridgeId; i <= lastBridgeId; i++ ) -+ { -+ sprintf( name, "nas%d", i ); -+ -+ if( dev_get(name) ) -+ { -+ ret = TRUE; -+ break; -+ } -+ } -+ -+ return(ret); -+} -+#endif -+ -+// led ctrl. Maps the ledName to the corresponding ledInfoPtr and perform the led operation -+void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) -+{ -+ PLED_INFO ledInfoPtr; -+ -+ // do the mapping from virtual to physical led -+ if( (int) ledName < MAX_VIRT_LEDS ) -+ ledInfoPtr = gpVirtLeds[(int) ledName]; -+ else -+ ledInfoPtr = NULL; -+ -+ if (ledInfoPtr == NULL) -+ return; -+ -+ if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] ) -+ { -+ (*gLedHwFunc[(int) ledName]) (ledName, ledState); -+ ledOffFail(ledInfoPtr); -+ return; -+ } -+ else -+ if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] ) -+ { -+ (*gLedHwFailFunc[(int) ledName]) (ledName, ledState); -+ ledOff(ledInfoPtr); -+ return; -+ } -+ -+#if 0 /* BROKEN */ -+ // Do not blink the WAN Data LED if at least one interface is in bridge mode. -+ if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP)) -+ { -+ static int BridgedProtocol = -1; -+ -+ if( BridgedProtocol == -1 ) -+ BridgedProtocol = isBridgedProtocol(); -+ -+ if( BridgedProtocol == TRUE ) -+ return; -+ } -+#endif -+ -+ // If the state is kLedStateFail and there is not a failure LED defined -+ // in the board parameters, change the state to kLedStateFastBlinkContinues. -+ if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 ) -+ ledState = kLedStateFastBlinkContinues; -+ -+ switch (ledState) -+ { -+ case kLedStateOn: -+ // First, turn off the complimentary (failure) LED GPIO. -+ if( ledInfoPtr->ledMaskFail ) -+ ledOffFail(ledInfoPtr); -+ else -+ if( gLedHwFailFunc[(int) ledName] ) -+ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); -+ -+ // Next, turn on the specified LED GPIO. -+ ledOn(ledInfoPtr); -+ break; -+ -+ case kLedStateOff: -+ // First, turn off the complimentary (failure) LED GPIO. -+ if( ledInfoPtr->ledMaskFail ) -+ ledOffFail(ledInfoPtr); -+ else -+ if( gLedHwFailFunc[(int) ledName] ) -+ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); -+ -+ // Next, turn off the specified LED GPIO. -+ ledOff(ledInfoPtr); -+ break; -+ -+ case kLedStateFail: -+ // First, turn off the complimentary (normal) LED GPIO. -+ if( ledInfoPtr->ledMask ) -+ ledOff(ledInfoPtr); -+ else -+ if( gLedHwFunc[(int) ledName] ) -+ (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff); -+ -+ // Next, turn on (red) the specified LED GPIO. -+ ledOnFail(ledInfoPtr); -+ break; -+ -+ case kLedStateBlinkOnce: -+ // skip blinkOnce if it is already in Slow/Fast blink continues state -+ if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues || -+ ledInfoPtr->savedLedState == kLedStateFastBlinkContinues) -+ ; -+ else -+ { -+ if (ledInfoPtr->blinkCountDown == 0) // skip the call if it is 1 -+ { -+ ledToggle(ledInfoPtr); -+ ledInfoPtr->blinkCountDown = 1; // it will be reset to 0 when timer expires -+ ledInfoPtr->ledState = kLedStateBlinkOnce; -+ ledTimerStart(); -+ } -+ } -+ break; -+ -+ case kLedStateSlowBlinkContinues: -+ ledInfoPtr->blinkCountDown = kSlowBlinkCount; -+ ledInfoPtr->ledState = kLedStateSlowBlinkContinues; -+ ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues; -+ ledTimerStart(); -+ break; -+ -+ case kLedStateFastBlinkContinues: -+ ledInfoPtr->blinkCountDown = kFastBlinkCount; -+ ledInfoPtr->ledState = kLedStateFastBlinkContinues; -+ ledInfoPtr->savedLedState = kLedStateFastBlinkContinues; -+ ledTimerStart(); -+ break; -+ -+ default: -+ printk("Invalid led state\n"); -+ } -+} -+ -+// This function is called for an LED that is controlled by hardware. -+void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName, -+ HANDLE_LED_FUNC ledHwFunc, int ledFailType ) -+{ -+ if( (int) ledName < MAX_VIRT_LEDS ) -+ { -+ if( ledFailType == 1 ) -+ gLedHwFailFunc[(int) ledName] = ledHwFunc; -+ else -+ gLedHwFunc[(int) ledName] = ledHwFunc; -+ } -+} -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/board.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/board.c ---- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/board.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/board.c 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,1570 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/*************************************************************************** -+ * File Name : board.c -+ * -+ * Description: This file contains Linux character device driver entry -+ * for the board related ioctl calls: flash, get free kernel -+ * page and dump kernel memory, etc. -+ * -+ * Created on : 2/20/2002 seanl: use cfiflash.c, cfliflash.h (AMD specific) -+ * -+ ***************************************************************************/ -+ -+ -+/* Includes. */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include "boardparms.h" -+#include "cfiflash.h" -+#include "bcm_intr.h" -+#include "board.h" -+#include "bcm_map_part.h" -+ -+/* Typedefs. */ -+#if defined (NON_CONSECUTIVE_MAC) -+// used to be the last octet. Now changed to the first 5 bits of the the forth octet -+// to reduced the duplicated MAC addresses. -+#define CHANGED_OCTET 3 -+#define SHIFT_BITS 3 -+#else -+#define CHANGED_OCTET 1 -+#define SHIFT_BITS 0 -+#endif -+ -+#if defined (WIRELESS) -+#define SES_BTN_PRESSED 0x00000001 -+#define SES_EVENTS SES_BTN_PRESSED /*OR all values if any*/ -+#define SES_LED_OFF 0 -+#define SES_LED_ON 1 -+#define SES_LED_BLINK 2 -+#endif -+ -+typedef struct -+{ -+ unsigned long ulId; -+ char chInUse; -+ char chReserved[3]; -+} MAC_ADDR_INFO, *PMAC_ADDR_INFO; -+ -+typedef struct -+{ -+ unsigned long ulSdramSize; -+ unsigned long ulPsiSize; -+ unsigned long ulNumMacAddrs; -+ unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; -+ MAC_ADDR_INFO MacAddrs[1]; -+} NVRAM_INFO, *PNVRAM_INFO; -+ -+typedef struct -+{ -+ unsigned long eventmask; -+} BOARD_IOC, *PBOARD_IOC; -+ -+ -+/*Dyinggasp callback*/ -+typedef void (*cb_dgasp_t)(void *arg); -+typedef struct _CB_DGASP__LIST -+{ -+ struct list_head list; -+ char name[IFNAMSIZ]; -+ cb_dgasp_t cb_dgasp_fn; -+ void *context; -+}CB_DGASP_LIST , *PCB_DGASP_LIST; -+ -+ -+static LED_MAP_PAIR LedMapping[] = -+{ // led name Initial state physical pin (ledMask) -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0} // NOTE: kLedEnd has to be at the end. -+}; -+ -+/* Externs. */ -+extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed); -+extern unsigned int nr_free_pages (void); -+extern const char *get_system_type(void); -+extern void kerSysFlashInit(void); -+extern unsigned long get_nvram_start_addr(void); -+extern unsigned long get_scratch_pad_start_addr(void); -+extern unsigned long getMemorySize(void); -+extern void __init boardLedInit(PLED_MAP_PAIR); -+extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); -+extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName, -+ HANDLE_LED_FUNC ledHwFunc, int ledFailType ); -+ -+/* Prototypes. */ -+void __init InitNvramInfo( void ); -+static int board_open( struct inode *inode, struct file *filp ); -+static int board_ioctl( struct inode *inode, struct file *flip, unsigned int command, unsigned long arg ); -+static ssize_t board_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos); -+static unsigned int board_poll(struct file *filp, struct poll_table_struct *wait); -+static int board_release(struct inode *inode, struct file *filp); -+ -+static BOARD_IOC* borad_ioc_alloc(void); -+static void borad_ioc_free(BOARD_IOC* board_ioc); -+ -+/* DyingGasp function prototype */ -+static void __init kerSysDyingGaspMapIntr(void); -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) -+static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs); -+#else -+static unsigned int kerSysDyingGaspIsr(void); -+#endif -+static void __init kerSysInitDyingGaspHandler( void ); -+static void __exit kerSysDeinitDyingGaspHandler( void ); -+/* -DyingGasp function prototype - */ -+ -+ -+#if defined (WIRELESS) -+static irqreturn_t sesBtn_isr(int irq, void *dev_id, struct pt_regs *ptregs); -+static void __init sesBtn_mapGpio(void); -+static void __init sesBtn_mapIntr(int context); -+static unsigned int sesBtn_poll(struct file *file, struct poll_table_struct *wait); -+static ssize_t sesBtn_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos); -+static void __init sesLed_mapGpio(void); -+static void sesLed_ctrl(int action); -+static void __init ses_board_init(void); -+static void __exit ses_board_deinit(void); -+#endif -+ -+static PNVRAM_INFO g_pNvramInfo = NULL; -+static int g_ledInitialized = 0; -+static wait_queue_head_t g_board_wait_queue; -+static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL; -+ -+static int g_wakeup_monitor = 0; -+static struct file *g_monitor_file = NULL; -+static struct task_struct *g_monitor_task = NULL; -+static unsigned int (*g_orig_fop_poll) -+ (struct file *, struct poll_table_struct *) = NULL; -+ -+static struct file_operations board_fops = -+{ -+ open: board_open, -+ ioctl: board_ioctl, -+ poll: board_poll, -+ read: board_read, -+ release: board_release, -+}; -+ -+uint32 board_major = 0; -+ -+#if defined (WIRELESS) -+static unsigned short sesBtn_irq = BP_NOT_DEFINED; -+static unsigned short sesBtn_gpio = BP_NOT_DEFINED; -+static unsigned short sesLed_gpio = BP_NOT_DEFINED; -+#endif -+ -+#if defined(MODULE) -+int init_module(void) -+{ -+ return( brcm_board_init() ); -+} -+ -+void cleanup_module(void) -+{ -+ if (MOD_IN_USE) -+ printk("brcm flash: cleanup_module failed because module is in use\n"); -+ else -+ brcm_board_cleanup(); -+} -+#endif //MODULE -+ -+ -+ -+static int __init brcm_board_init( void ) -+{ -+ typedef int (*BP_LED_FUNC) (unsigned short *); -+ static struct BpLedInformation -+ { -+ BOARD_LED_NAME ledName; -+ BP_LED_FUNC bpFunc; -+ BP_LED_FUNC bpFuncFail; -+ } bpLedInfo[] = -+ {{kLedAdsl, BpGetAdslLedGpio, BpGetAdslFailLedGpio}, -+ {kLedWireless, BpGetWirelessLedGpio, NULL}, -+ {kLedUsb, BpGetUsbLedGpio, NULL}, -+ {kLedHpna, BpGetHpnaLedGpio, NULL}, -+ {kLedWanData, BpGetWanDataLedGpio, NULL}, -+ {kLedPPP, BpGetPppLedGpio, BpGetPppFailLedGpio}, -+ {kLedVoip, BpGetVoipLedGpio, NULL}, -+ {kLedSes, BpGetWirelessSesLedGpio, NULL}, -+ {kLedEnd, NULL, NULL} -+ }; -+ -+ int ret; -+ -+ ret = register_chrdev(BOARD_DRV_MAJOR, "bcrmboard", &board_fops ); -+ if (ret < 0) -+ printk( "brcm_board_init(major %d): fail to register device.\n",BOARD_DRV_MAJOR); -+ else -+ { -+ PLED_MAP_PAIR pLedMap = LedMapping; -+ unsigned short gpio; -+ struct BpLedInformation *pInfo; -+ -+ printk("brcmboard: brcm_board_init entry\n"); -+ board_major = BOARD_DRV_MAJOR; -+ InitNvramInfo(); -+ -+ for( pInfo = bpLedInfo; pInfo->ledName != kLedEnd; pInfo++ ) -+ { -+ if( pInfo->bpFunc && (*pInfo->bpFunc) (&gpio) == BP_SUCCESS ) -+ { -+ pLedMap->ledName = pInfo->ledName; -+ pLedMap->ledMask = GPIO_NUM_TO_MASK(gpio); -+ pLedMap->ledActiveLow = (gpio & BP_ACTIVE_LOW) ? 1 : 0; -+ } -+ if( pInfo->bpFuncFail && (*pInfo->bpFuncFail) (&gpio) == BP_SUCCESS ) -+ { -+ pLedMap->ledName = pInfo->ledName; -+ pLedMap->ledMaskFail = GPIO_NUM_TO_MASK(gpio); -+ pLedMap->ledActiveLowFail = (gpio & BP_ACTIVE_LOW) ? 1 : 0; -+ } -+ if( pLedMap->ledName != kLedEnd ) -+ pLedMap++; -+ } -+ -+ init_waitqueue_head(&g_board_wait_queue); -+#if defined (WIRELESS) -+ ses_board_init(); -+#endif -+ kerSysInitDyingGaspHandler(); -+ kerSysDyingGaspMapIntr(); -+ -+ boardLedInit(LedMapping); -+ g_ledInitialized = 1; -+ } -+ -+ return ret; -+} -+ -+void __init InitNvramInfo( void ) -+{ -+ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); -+ unsigned long ulNumMacAddrs = pNvramData->ulNumMacAddrs; -+ -+ if( ulNumMacAddrs > 0 && ulNumMacAddrs <= NVRAM_MAC_COUNT_MAX ) -+ { -+ unsigned long ulNvramInfoSize = -+ sizeof(NVRAM_INFO) + ((sizeof(MAC_ADDR_INFO) - 1) * ulNumMacAddrs); -+ -+ g_pNvramInfo = (PNVRAM_INFO) kmalloc( ulNvramInfoSize, GFP_KERNEL ); -+ -+ if( g_pNvramInfo ) -+ { -+ unsigned long ulPsiSize; -+ if( BpGetPsiSize( &ulPsiSize ) != BP_SUCCESS ) -+ ulPsiSize = NVRAM_PSI_DEFAULT; -+ memset( g_pNvramInfo, 0x00, ulNvramInfoSize ); -+ g_pNvramInfo->ulPsiSize = ulPsiSize * 1024; -+ g_pNvramInfo->ulNumMacAddrs = pNvramData->ulNumMacAddrs; -+ memcpy( g_pNvramInfo->ucaBaseMacAddr, pNvramData->ucaBaseMacAddr, -+ NVRAM_MAC_ADDRESS_LEN ); -+ g_pNvramInfo->ulSdramSize = getMemorySize(); -+ } -+ else -+ printk("ERROR - Could not allocate memory for NVRAM data\n"); -+ } -+ else -+ printk("ERROR - Invalid number of MAC addresses (%ld) is configured.\n", -+ ulNumMacAddrs); -+} -+ -+void __exit brcm_board_cleanup( void ) -+{ -+ printk("brcm_board_cleanup()\n"); -+ -+ if (board_major != -1) -+ { -+#if defined (WIRELESS) -+ ses_board_deinit(); -+#endif -+ kerSysDeinitDyingGaspHandler(); -+ unregister_chrdev(board_major, "board_ioctl"); -+ } -+} -+ -+static BOARD_IOC* borad_ioc_alloc(void) -+{ -+ BOARD_IOC *board_ioc =NULL; -+ board_ioc = (BOARD_IOC*) kmalloc( sizeof(BOARD_IOC) , GFP_KERNEL ); -+ if(board_ioc) -+ { -+ memset(board_ioc, 0, sizeof(BOARD_IOC)); -+ } -+ return board_ioc; -+} -+ -+static void borad_ioc_free(BOARD_IOC* board_ioc) -+{ -+ if(board_ioc) -+ { -+ kfree(board_ioc); -+ } -+} -+ -+ -+static int board_open( struct inode *inode, struct file *filp ) -+{ -+ filp->private_data = borad_ioc_alloc(); -+ -+ if (filp->private_data == NULL) -+ return -ENOMEM; -+ -+ return( 0 ); -+} -+ -+static int board_release(struct inode *inode, struct file *filp) -+{ -+ BOARD_IOC *board_ioc = filp->private_data; -+ -+ wait_event_interruptible(g_board_wait_queue, 1); -+ borad_ioc_free(board_ioc); -+ -+ return( 0 ); -+} -+ -+ -+static unsigned int board_poll(struct file *filp, struct poll_table_struct *wait) -+{ -+ unsigned int mask = 0; -+#if defined (WIRELESS) -+ BOARD_IOC *board_ioc = filp->private_data; -+#endif -+ -+ poll_wait(filp, &g_board_wait_queue, wait); -+#if defined (WIRELESS) -+ if(board_ioc->eventmask & SES_EVENTS){ -+ mask |= sesBtn_poll(filp, wait); -+ } -+#endif -+ -+ return mask; -+} -+ -+ -+static ssize_t board_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos) -+{ -+#if defined (WIRELESS) -+ BOARD_IOC *board_ioc = filp->private_data; -+ if(board_ioc->eventmask & SES_EVENTS){ -+ return sesBtn_read(filp, buffer, count, ppos); -+ } -+#endif -+ return 0; -+} -+ -+//************************************************************************************** -+// Utitlities for dump memory, free kernel pages, mips soft reset, etc. -+//************************************************************************************** -+ -+/*********************************************************************** -+ * Function Name: dumpaddr -+ * Description : Display a hex dump of the specified address. -+ ***********************************************************************/ -+void dumpaddr( unsigned char *pAddr, int nLen ) -+{ -+ static char szHexChars[] = "0123456789abcdef"; -+ char szLine[80]; -+ char *p = szLine; -+ unsigned char ch, *q; -+ int i, j; -+ unsigned long ul; -+ -+ while( nLen > 0 ) -+ { -+ sprintf( szLine, "%8.8lx: ", (unsigned long) pAddr ); -+ p = szLine + strlen(szLine); -+ -+ for(i = 0; i < 16 && nLen > 0; i += sizeof(long), nLen -= sizeof(long)) -+ { -+ ul = *(unsigned long *) &pAddr[i]; -+ q = (unsigned char *) &ul; -+ for( j = 0; j < sizeof(long); j++ ) -+ { -+ *p++ = szHexChars[q[j] >> 4]; -+ *p++ = szHexChars[q[j] & 0x0f]; -+ *p++ = ' '; -+ } -+ } -+ -+ for( j = 0; j < 16 - i; j++ ) -+ *p++ = ' ', *p++ = ' ', *p++ = ' '; -+ -+ *p++ = ' ', *p++ = ' ', *p++ = ' '; -+ -+ for( j = 0; j < i; j++ ) -+ { -+ ch = pAddr[j]; -+ *p++ = (ch > ' ' && ch < '~') ? ch : '.'; -+ } -+ -+ *p++ = '\0'; -+ printk( "%s\r\n", szLine ); -+ -+ pAddr += i; -+ } -+ printk( "\r\n" ); -+} /* dumpaddr */ -+ -+ -+void kerSysMipsSoftReset(void) -+{ -+#if defined(CONFIG_BCM96348) -+ if (PERF->RevID == 0x634800A1) { -+ typedef void (*FNPTR) (void); -+ FNPTR bootaddr = (FNPTR) FLASH_BASE; -+ int i; -+ -+ /* Disable interrupts. */ -+ cli(); -+ -+ /* Reset all blocks. */ -+ PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS; -+ for( i = 0; i < 1000000; i++ ) -+ ; -+ PERF->BlockSoftReset |= BSR_ALL_BLOCKS; -+ /* Jump to the power on address. */ -+ (*bootaddr) (); -+ } -+ else -+ PERF->pll_control |= SOFT_RESET; // soft reset mips -+#else -+ PERF->pll_control |= SOFT_RESET; // soft reset mips -+#endif -+} -+ -+ -+int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId ) -+{ -+ int nRet = 0; -+ PMAC_ADDR_INFO pMai = NULL; -+ PMAC_ADDR_INFO pMaiFreeNoId = NULL; -+ PMAC_ADDR_INFO pMaiFreeId = NULL; -+ unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0; -+ -+ for( i = 0, pMai = g_pNvramInfo->MacAddrs; i < g_pNvramInfo->ulNumMacAddrs; -+ i++, pMai++ ) -+ { -+ if( ulId == pMai->ulId || ulId == MAC_ADDRESS_ANY ) -+ { -+ /* This MAC address has been used by the caller in the past. */ -+ memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr, -+ NVRAM_MAC_ADDRESS_LEN ); -+ shiftedIdx = i; -+ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS); -+ pMai->chInUse = 1; -+ pMaiFreeNoId = pMaiFreeId = NULL; -+ break; -+ } -+ else -+ if( pMai->chInUse == 0 ) -+ { -+ if( pMai->ulId == 0 && pMaiFreeNoId == NULL ) -+ { -+ /* This is an available MAC address that has never been -+ * used. -+ */ -+ pMaiFreeNoId = pMai; -+ ulIdxNoId = i; -+ } -+ else -+ if( pMai->ulId != 0 && pMaiFreeId == NULL ) -+ { -+ /* This is an available MAC address that has been used -+ * before. Use addresses that have never been used -+ * first, before using this one. -+ */ -+ pMaiFreeId = pMai; -+ ulIdxId = i; -+ } -+ } -+ } -+ -+ if( pMaiFreeNoId || pMaiFreeId ) -+ { -+ /* An available MAC address was found. */ -+ memcpy(pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,NVRAM_MAC_ADDRESS_LEN); -+ if( pMaiFreeNoId ) -+ { -+ shiftedIdx = ulIdxNoId; -+ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS); -+ pMaiFreeNoId->ulId = ulId; -+ pMaiFreeNoId->chInUse = 1; -+ } -+ else -+ { -+ shiftedIdx = ulIdxId; -+ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS); -+ pMaiFreeId->ulId = ulId; -+ pMaiFreeId->chInUse = 1; -+ } -+ } -+ else -+ if( i == g_pNvramInfo->ulNumMacAddrs ) -+ nRet = -EADDRNOTAVAIL; -+ -+ return( nRet ); -+} /* kerSysGetMacAddr */ -+ -+int kerSysReleaseMacAddress( unsigned char *pucaMacAddr ) -+{ -+ int nRet = -EINVAL; -+ unsigned long ulIdx = 0; -+ int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] - -+ g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]); -+ -+ // if overflow 255 (negitive), add 256 to have the correct index -+ if (idx < 0) -+ idx += 256; -+ ulIdx = (unsigned long) (idx >> SHIFT_BITS); -+ -+ if( ulIdx < g_pNvramInfo->ulNumMacAddrs ) -+ { -+ PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx]; -+ if( pMai->chInUse == 1 ) -+ { -+ pMai->chInUse = 0; -+ nRet = 0; -+ } -+ } -+ -+ return( nRet ); -+} /* kerSysReleaseMacAddr */ -+ -+int kerSysGetSdramSize( void ) -+{ -+ return( (int) g_pNvramInfo->ulSdramSize ); -+} /* kerSysGetSdramSize */ -+ -+ -+void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) -+{ -+ if (g_ledInitialized) -+ boardLedCtrl(ledName, ledState); -+} -+ -+unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t) -+{ -+ int mask = (*g_orig_fop_poll) (f, t); -+ -+ if( g_wakeup_monitor == 1 && g_monitor_file == f ) -+ { -+ /* If g_wakeup_monitor is non-0, the user mode application needs to -+ * return from a blocking select function. Return POLLPRI which will -+ * cause the select to return with the exception descriptor set. -+ */ -+ mask |= POLLPRI; -+ g_wakeup_monitor = 0; -+ } -+ -+ return( mask ); -+} -+ -+/* Put the user mode application that monitors link state on a run queue. */ -+void kerSysWakeupMonitorTask( void ) -+{ -+ g_wakeup_monitor = 1; -+ if( g_monitor_task ) -+ wake_up_process( g_monitor_task ); -+} -+ -+//******************************************************************************************** -+// misc. ioctl calls come to here. (flash, led, reset, kernel memory access, etc.) -+//******************************************************************************************** -+static int board_ioctl( struct inode *inode, struct file *flip, -+ unsigned int command, unsigned long arg ) -+{ -+ int ret = 0; -+ BOARD_IOCTL_PARMS ctrlParms; -+ unsigned char ucaMacAddr[NVRAM_MAC_ADDRESS_LEN]; -+ int allowedSize; -+ -+ switch (command) -+ { -+ case BOARD_IOCTL_FLASH_INIT: -+ // not used for now. kerSysBcmImageInit(); -+ break; -+ -+ -+ case BOARD_IOCTL_FLASH_WRITE: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ NVRAM_DATA SaveNvramData; -+ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); -+ -+ switch (ctrlParms.action) -+ { -+ case SCRATCH_PAD: -+ ret = kerSysScratchPadSet(ctrlParms.string, ctrlParms.buf, ctrlParms.offset); -+ break; -+ -+ case PERSISTENT: -+ ret = kerSysPersistentSet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset); -+ break; -+ -+ case NVRAM: -+ ret = kerSysNvRamSet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset); -+ break; -+ -+ case BCM_IMAGE_CFE: -+ if( ctrlParms.strLen <= 0 || ctrlParms.strLen > FLASH45_LENGTH_BOOT_ROM ) -+ { -+ printk("Illegal CFE size [%d]. Size allowed: [%d]\n", -+ ctrlParms.strLen, FLASH45_LENGTH_BOOT_ROM); -+ ret = -1; -+ break; -+ } -+ -+ // save NVRAM data into a local structure -+ memcpy( &SaveNvramData, pNvramData, sizeof(NVRAM_DATA) ); -+ -+ // set memory type field -+ BpGetSdramSize( (unsigned long *) &ctrlParms.string[SDRAM_TYPE_ADDRESS_OFFSET] ); -+ -+ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen); -+ -+ // if nvram is not valid, restore the current nvram settings -+ if( BpSetBoardId( pNvramData->szBoardId ) != BP_SUCCESS && -+ *(unsigned long *) pNvramData == NVRAM_DATA_ID ) -+ { -+ kerSysNvRamSet((char *) &SaveNvramData, sizeof(SaveNvramData), 0); -+ } -+ break; -+ -+ case BCM_IMAGE_FS: -+ allowedSize = (int) flash_get_total_size() - \ -+ FLASH_RESERVED_AT_END - TAG_LEN - FLASH45_LENGTH_BOOT_ROM; -+ if( ctrlParms.strLen <= 0 || ctrlParms.strLen > allowedSize) -+ { -+ printk("Illegal root file system size [%d]. Size allowed: [%d]\n", -+ ctrlParms.strLen, allowedSize); -+ ret = -1; -+ break; -+ } -+ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen); -+ kerSysMipsSoftReset(); -+ break; -+ -+ case BCM_IMAGE_KERNEL: // not used for now. -+ break; -+ case BCM_IMAGE_WHOLE: -+ if(ctrlParms.strLen <= 0) -+ { -+ printk("Illegal flash image size [%d].\n", ctrlParms.strLen); -+ ret = -1; -+ break; -+ } -+ -+ // save NVRAM data into a local structure -+ memcpy( &SaveNvramData, pNvramData, sizeof(NVRAM_DATA) ); -+ -+ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen); -+ -+ // if nvram is not valid, restore the current nvram settings -+ if( BpSetBoardId( pNvramData->szBoardId ) != BP_SUCCESS && -+ *(unsigned long *) pNvramData == NVRAM_DATA_ID ) -+ { -+ kerSysNvRamSet((char *) &SaveNvramData, sizeof(SaveNvramData), 0); -+ } -+ -+ kerSysMipsSoftReset(); -+ break; -+ -+ default: -+ ret = -EINVAL; -+ printk("flash_ioctl_command: invalid command %d\n", ctrlParms.action); -+ break; -+ } -+ ctrlParms.result = ret; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_FLASH_READ: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ switch (ctrlParms.action) -+ { -+ case SCRATCH_PAD: -+ ret = kerSysScratchPadGet(ctrlParms.string, ctrlParms.buf, ctrlParms.offset); -+ break; -+ -+ case PERSISTENT: -+ ret = kerSysPersistentGet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset); -+ break; -+ -+ case NVRAM: -+ ret = kerSysNvRamGet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset); -+ break; -+ -+ case FLASH_SIZE: -+ ret = kerSysFlashSizeGet(); -+ break; -+ -+ default: -+ ret = -EINVAL; -+ printk("Not supported. invalid command %d\n", ctrlParms.action); -+ break; -+ } -+ ctrlParms.result = ret; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_GET_NR_PAGES: -+ ctrlParms.result = nr_free_pages() + get_page_cache_size(); -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ break; -+ -+ case BOARD_IOCTL_DUMP_ADDR: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ dumpaddr( (unsigned char *) ctrlParms.string, ctrlParms.strLen ); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_SET_MEMORY: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ unsigned long *pul = (unsigned long *) ctrlParms.string; -+ unsigned short *pus = (unsigned short *) ctrlParms.string; -+ unsigned char *puc = (unsigned char *) ctrlParms.string; -+ switch( ctrlParms.strLen ) -+ { -+ case 4: -+ *pul = (unsigned long) ctrlParms.offset; -+ break; -+ case 2: -+ *pus = (unsigned short) ctrlParms.offset; -+ break; -+ case 1: -+ *puc = (unsigned char) ctrlParms.offset; -+ break; -+ } -+ dumpaddr( (unsigned char *) ctrlParms.string, sizeof(long) ); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_MIPS_SOFT_RESET: -+ kerSysMipsSoftReset(); -+ break; -+ -+ case BOARD_IOCTL_LED_CTRL: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ kerSysLedCtrl((BOARD_LED_NAME)ctrlParms.strLen, (BOARD_LED_STATE)ctrlParms.offset); -+ ret = 0; -+ } -+ break; -+ -+ case BOARD_IOCTL_GET_ID: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, -+ sizeof(ctrlParms)) == 0) -+ { -+ if( ctrlParms.string ) -+ { -+ char *p = (char *) get_system_type(); -+ if( strlen(p) + 1 < ctrlParms.strLen ) -+ ctrlParms.strLen = strlen(p) + 1; -+ __copy_to_user(ctrlParms.string, p, ctrlParms.strLen); -+ } -+ -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, -+ sizeof(BOARD_IOCTL_PARMS)); -+ } -+ break; -+ -+ case BOARD_IOCTL_GET_MAC_ADDRESS: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ ctrlParms.result = kerSysGetMacAddress( ucaMacAddr, -+ ctrlParms.offset ); -+ -+ if( ctrlParms.result == 0 ) -+ { -+ __copy_to_user(ctrlParms.string, ucaMacAddr, -+ sizeof(ucaMacAddr)); -+ } -+ -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, -+ sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_RELEASE_MAC_ADDRESS: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ if (copy_from_user((void*)ucaMacAddr, (void*)ctrlParms.string, \ -+ NVRAM_MAC_ADDRESS_LEN) == 0) -+ { -+ ctrlParms.result = kerSysReleaseMacAddress( ucaMacAddr ); -+ } -+ else -+ { -+ ctrlParms.result = -EACCES; -+ } -+ -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, -+ sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_GET_PSI_SIZE: -+ ctrlParms.result = (int) g_pNvramInfo->ulPsiSize; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ break; -+ -+ case BOARD_IOCTL_GET_SDRAM_SIZE: -+ ctrlParms.result = (int) g_pNvramInfo->ulSdramSize; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ break; -+ -+ case BOARD_IOCTL_GET_BASE_MAC_ADDRESS: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ __copy_to_user(ctrlParms.string, g_pNvramInfo->ucaBaseMacAddr, NVRAM_MAC_ADDRESS_LEN); -+ ctrlParms.result = 0; -+ -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, -+ sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_GET_CHIP_ID: -+ ctrlParms.result = (int) (PERF->RevID & 0xFFFF0000) >> 16; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ break; -+ -+ case BOARD_IOCTL_GET_NUM_ENET: { -+ ETHERNET_MAC_INFO EnetInfos[BP_MAX_ENET_MACS]; -+ int i, numeth = 0; -+ if (BpGetEthernetMacInfo(EnetInfos, BP_MAX_ENET_MACS) == BP_SUCCESS) { -+ for( i = 0; i < BP_MAX_ENET_MACS; i++) { -+ if (EnetInfos[i].ucPhyType != BP_ENET_NO_PHY) { -+ numeth++; -+ } -+ } -+ ctrlParms.result = numeth; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ } -+ -+ case BOARD_IOCTL_GET_CFE_VER: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ char *vertag = (char *)(FLASH_BASE + CFE_VERSION_OFFSET); -+ if (ctrlParms.strLen < CFE_VERSION_SIZE) { -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = -EFAULT; -+ } -+ else if (strncmp(vertag, "cfe-v", 5)) { // no tag info in flash -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else { -+ ctrlParms.result = 1; -+ __copy_to_user(ctrlParms.string, vertag+CFE_VERSION_MARK_SIZE, CFE_VERSION_SIZE); -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ -+ case BOARD_IOCTL_GET_ENET_CFG: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ ETHERNET_MAC_INFO EnetInfos[BP_MAX_ENET_MACS]; -+ if (BpGetEthernetMacInfo(EnetInfos, BP_MAX_ENET_MACS) == BP_SUCCESS) { -+ if (ctrlParms.strLen == sizeof(EnetInfos)) { -+ __copy_to_user(ctrlParms.string, EnetInfos, sizeof(EnetInfos)); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } else -+ ret = -EFAULT; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ -+#if defined (WIRELESS) -+ case BOARD_IOCTL_GET_WLAN_ANT_INUSE: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ unsigned short antInUse = 0; -+ if (BpGetWirelessAntInUse(&antInUse) == BP_SUCCESS) { -+ if (ctrlParms.strLen == sizeof(antInUse)) { -+ __copy_to_user(ctrlParms.string, &antInUse, sizeof(antInUse)); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } else -+ ret = -EFAULT; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+#endif -+ case BOARD_IOCTL_SET_TRIGGER_EVENT: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data; -+ ctrlParms.result = -EFAULT; -+ ret = -EFAULT; -+ if (ctrlParms.strLen == sizeof(unsigned long)) { -+ board_ioc->eventmask |= *((int*)ctrlParms.string); -+#if defined (WIRELESS) -+ if((board_ioc->eventmask & SES_EVENTS)) { -+ if(sesBtn_irq != BP_NOT_DEFINED) { -+ BcmHalInterruptEnable(sesBtn_irq); -+ ctrlParms.result = 0; -+ ret = 0; -+ } -+ } -+#endif -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ } -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ -+ case BOARD_IOCTL_GET_TRIGGER_EVENT: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data; -+ if (ctrlParms.strLen == sizeof(unsigned long)) { -+ __copy_to_user(ctrlParms.string, &board_ioc->eventmask, sizeof(unsigned long)); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } else -+ ret = -EFAULT; -+ -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ -+ case BOARD_IOCTL_UNSET_TRIGGER_EVENT: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ if (ctrlParms.strLen == sizeof(unsigned long)) { -+ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data; -+ board_ioc->eventmask &= (~(*((int*)ctrlParms.string))); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } else -+ ret = -EFAULT; -+ -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+#if defined (WIRELESS) -+ case BOARD_IOCTL_SET_SES_LED: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ if (ctrlParms.strLen == sizeof(int)) { -+ sesLed_ctrl(*(int*)ctrlParms.string); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } else -+ ret = -EFAULT; -+ -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+#endif -+ -+ case BOARD_IOCTL_SET_MONITOR_FD: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ int fput_needed = 0; -+ -+ g_monitor_file = fget_light( ctrlParms.offset, &fput_needed ); -+ if( g_monitor_file ) { -+ /* Hook this file descriptor's poll function in order to set -+ * the exception descriptor when there is a change in link -+ * state. -+ */ -+ g_monitor_task = current; -+ g_orig_fop_poll = g_monitor_file->f_op->poll; -+ g_monitor_file->f_op->poll = kerSysMonitorPollHook; -+ } -+ } -+ break; -+ -+ case BOARD_IOCTL_WAKEUP_MONITOR_TASK: -+ kerSysWakeupMonitorTask(); -+ break; -+ -+ default: -+ ret = -EINVAL; -+ ctrlParms.result = 0; -+ printk("board_ioctl: invalid command %x, cmd %d .\n",command,_IOC_NR(command)); -+ break; -+ -+ } /* switch */ -+ -+ return (ret); -+ -+} /* board_ioctl */ -+ -+/*************************************************************************** -+ * SES Button ISR/GPIO/LED functions. -+ ***************************************************************************/ -+#if defined (WIRELESS) -+static irqreturn_t sesBtn_isr(int irq, void *dev_id, struct pt_regs *ptregs) -+{ -+#if defined(_BCM96338_) || defined(CONFIG_BCM96338) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96345_) || defined(CONFIG_BCM96345) -+ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned short *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96348_) || defined (CONFIG_BCM96348) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+ -+ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 ) -+ { -+ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio); -+ gpio_reg = &GPIO->GPIOio_high; -+ } -+#endif -+ -+ if (!(*gpio_reg & gpio_mask)){ -+ wake_up_interruptible(&g_board_wait_queue); -+ return IRQ_RETVAL(1); -+ } else { -+ return IRQ_RETVAL(0); -+ } -+} -+ -+static void __init sesBtn_mapGpio() -+{ -+ if( BpGetWirelessSesBtnGpio(&sesBtn_gpio) == BP_SUCCESS ) -+ { -+ printk("SES: Button GPIO 0x%x is enabled\n", sesBtn_gpio); -+ } -+} -+ -+static void __init sesBtn_mapIntr(int context) -+{ -+ if( BpGetWirelessSesExtIntr(&sesBtn_irq) == BP_SUCCESS ) -+ { -+ printk("SES: Button Interrupt 0x%x is enabled\n", sesBtn_irq); -+ } -+ else -+ return; -+ -+ sesBtn_irq += INTERRUPT_ID_EXTERNAL_0; -+ -+ if (BcmHalMapInterrupt((FN_HANDLER)sesBtn_isr, context, sesBtn_irq)) { -+ printk("SES: Interrupt mapping failed\n"); -+ } -+ BcmHalInterruptEnable(sesBtn_irq); -+} -+ -+ -+static unsigned int sesBtn_poll(struct file *file, struct poll_table_struct *wait) -+{ -+#if defined(_BCM96338_) || defined(CONFIG_BCM96338) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96345_) || defined(CONFIG_BCM96345) -+ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned short *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96348_) || defined (CONFIG_BCM96348) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+ -+ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 ) -+ { -+ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio); -+ gpio_reg = &GPIO->GPIOio_high; -+ } -+#endif -+ -+ if (!(*gpio_reg & gpio_mask)){ -+ return POLLIN; -+ } -+ return 0; -+} -+ -+static ssize_t sesBtn_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) -+{ -+ volatile unsigned int event=0; -+ ssize_t ret=0; -+ -+#if defined(_BCM96338_) || defined (CONFIG_BCM96338) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96345_) || defined (CONFIG_BCM96345) -+ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned short *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96348_) || defined (CONFIG_BCM96348) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+ -+ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 ) -+ { -+ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio); -+ gpio_reg = &GPIO->GPIOio_high; -+ } -+#endif -+ -+ if(*gpio_reg & gpio_mask){ -+ BcmHalInterruptEnable(sesBtn_irq); -+ return ret; -+ } -+ event = SES_EVENTS; -+ __copy_to_user((char*)buffer, (char*)&event, sizeof(event)); -+ BcmHalInterruptEnable(sesBtn_irq); -+ count -= sizeof(event); -+ buffer += sizeof(event); -+ ret += sizeof(event); -+ return ret; -+} -+ -+static void __init sesLed_mapGpio() -+{ -+ if( BpGetWirelessSesBtnGpio(&sesLed_gpio) == BP_SUCCESS ) -+ { -+ printk("SES: LED GPIO 0x%x is enabled\n", sesBtn_gpio); -+ } -+} -+ -+static void sesLed_ctrl(int action) -+{ -+ -+ //char status = ((action >> 8) & 0xff); /* extract status */ -+ //char event = ((action >> 16) & 0xff); /* extract event */ -+ //char blinktype = ((action >> 24) & 0xff); /* extract blink type for SES_LED_BLINK */ -+ -+ BOARD_LED_STATE led; -+ -+ if(sesLed_gpio == BP_NOT_DEFINED) -+ return; -+ -+ action &= 0xff; /* extract led */ -+ -+ //printk("blinktype=%d, event=%d, status=%d\n",(int)blinktype, (int)event, (int)status); -+ -+ switch (action) -+ { -+ case SES_LED_ON: -+ //printk("SES: led on\n"); -+ led = kLedStateOn; -+ break; -+ case SES_LED_BLINK: -+ //printk("SES: led blink\n"); -+ led = kLedStateSlowBlinkContinues; -+ break; -+ case SES_LED_OFF: -+ default: -+ //printk("SES: led off\n"); -+ led = kLedStateOff; -+ } -+ -+ kerSysLedCtrl(kLedSes, led); -+} -+ -+static void __init ses_board_init() -+{ -+ sesBtn_mapGpio(); -+ sesBtn_mapIntr(0); -+ sesLed_mapGpio(); -+} -+static void __exit ses_board_deinit() -+{ -+ if(sesBtn_irq) -+ BcmHalInterruptDisable(sesBtn_irq); -+} -+#endif -+ -+/*************************************************************************** -+ * Dying gasp ISR and functions. -+ ***************************************************************************/ -+#define KERSYS_DBG printk -+ -+#if defined(CONFIG_BCM96345) -+#define CYCLE_PER_US 70 -+#elif defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) -+/* The BCM6348 cycles per microsecond is really variable since the BCM6348 -+ * MIPS speed can vary depending on the PLL settings. However, an appoximate -+ * value of 120 will still work OK for the test being done. -+ */ -+#define CYCLE_PER_US 120 -+#endif -+#define DG_GLITCH_TO (100*CYCLE_PER_US) -+ -+static void __init kerSysDyingGaspMapIntr() -+{ -+ unsigned long ulIntr; -+ -+#if defined(CONFIG_BCM96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(_BCM96338_) -+ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) { -+ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, INTERRUPT_ID_DG); -+ BcmHalInterruptEnable( INTERRUPT_ID_DG ); -+ } -+#elif defined(CONFIG_BCM96345) || defined(_BCM96345_) -+ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) { -+ ulIntr += INTERRUPT_ID_EXTERNAL_0; -+ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, ulIntr); -+ BcmHalInterruptEnable( ulIntr ); -+ } -+#endif -+ -+} -+ -+void kerSysSetWdTimer(ulong timeUs) -+{ -+ TIMER->WatchDogDefCount = timeUs * (FPERIPH/1000000); -+ TIMER->WatchDogCtl = 0xFF00; -+ TIMER->WatchDogCtl = 0x00FF; -+} -+ -+ulong kerSysGetCycleCount(void) -+{ -+ ulong cnt; -+#ifdef _WIN32_WCE -+ cnt = 0; -+#else -+ __asm volatile("mfc0 %0, $9":"=d"(cnt)); -+#endif -+ return(cnt); -+} -+ -+static Bool kerSysDyingGaspCheckPowerLoss(void) -+{ -+ ulong clk0; -+ ulong ulIntr; -+ -+ ulIntr = 0; -+ clk0 = kerSysGetCycleCount(); -+ -+ UART->Data = 'D'; -+ UART->Data = '%'; -+ UART->Data = 'G'; -+ -+#if defined(CONFIG_BCM96345) -+ BpGetAdslDyingGaspExtIntr( &ulIntr ); -+ -+ do { -+ ulong clk1; -+ -+ clk1 = kerSysGetCycleCount(); /* time cleared */ -+ /* wait a little to get new reading */ -+ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) -+ ; -+ } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); -+ -+ if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) { /* power glitch */ -+ BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0); -+ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); -+ return 0; -+ } -+#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS) -+ do { -+ ulong clk1; -+ -+ clk1 = kerSysGetCycleCount(); /* time cleared */ -+ /* wait a little to get new reading */ -+ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) -+ ; -+ } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); -+ -+ if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) { -+ BcmHalInterruptEnable( INTERRUPT_ID_DG ); -+ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); -+ return 0; -+ } -+#endif -+ return 1; -+} -+ -+static void kerSysDyingGaspShutdown( void ) -+{ -+ kerSysSetWdTimer(1000000); -+#if defined(CONFIG_BCM96345) -+ PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN); -+#elif defined(CONFIG_BCM96348) -+ PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN); -+#endif -+} -+ -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) -+static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs) -+#else -+static unsigned int kerSysDyingGaspIsr(void) -+#endif -+{ -+ struct list_head *pos; -+ CB_DGASP_LIST *tmp, *dsl = NULL; -+ -+ if (kerSysDyingGaspCheckPowerLoss()) { -+ -+ /* first to turn off everything other than dsl */ -+ list_for_each(pos, &g_cb_dgasp_list_head->list) { -+ tmp = list_entry(pos, CB_DGASP_LIST, list); -+ if(strncmp(tmp->name, "dsl", 3)) { -+ (tmp->cb_dgasp_fn)(tmp->context); -+ }else { -+ dsl = tmp; -+ } -+ } -+ -+ /* now send dgasp */ -+ if(dsl) -+ (dsl->cb_dgasp_fn)(dsl->context); -+ -+ /* reset and shutdown system */ -+ kerSysDyingGaspShutdown(); -+ } -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) -+return( IRQ_HANDLED ); -+#else -+ return( 1 ); -+#endif -+} -+ -+static void __init kerSysInitDyingGaspHandler( void ) -+{ -+ CB_DGASP_LIST *new_node; -+ -+ if( g_cb_dgasp_list_head != NULL) { -+ printk("Error: kerSysInitDyingGaspHandler: list head is not null\n"); -+ return; -+ } -+ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); -+ memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); -+ INIT_LIST_HEAD(&new_node->list); -+ g_cb_dgasp_list_head = new_node; -+ -+} /* kerSysInitDyingGaspHandler */ -+ -+static void __exit kerSysDeinitDyingGaspHandler( void ) -+{ -+ struct list_head *pos; -+ CB_DGASP_LIST *tmp; -+ -+ if(g_cb_dgasp_list_head == NULL) -+ return; -+ -+ list_for_each(pos, &g_cb_dgasp_list_head->list) { -+ tmp = list_entry(pos, CB_DGASP_LIST, list); -+ list_del(pos); -+ kfree(tmp); -+ } -+ -+ kfree(g_cb_dgasp_list_head); -+ g_cb_dgasp_list_head = NULL; -+ -+} /* kerSysDeinitDyingGaspHandler */ -+ -+void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context) -+{ -+ CB_DGASP_LIST *new_node; -+ -+ if( g_cb_dgasp_list_head == NULL) { -+ printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n"); -+ return; -+ } -+ -+ if( devname == NULL || cbfn == NULL ) { -+ printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context); -+ return; -+ } -+ -+ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); -+ memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); -+ INIT_LIST_HEAD(&new_node->list); -+ strncpy(new_node->name, devname, IFNAMSIZ); -+ new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn; -+ new_node->context = context; -+ list_add(&new_node->list, &g_cb_dgasp_list_head->list); -+ -+ printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname); -+ -+} /* kerSysRegisterDyingGaspHandler */ -+ -+void kerSysDeregisterDyingGaspHandler(char *devname) -+{ -+ struct list_head *pos; -+ CB_DGASP_LIST *tmp; -+ -+ if(g_cb_dgasp_list_head == NULL) { -+ printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n"); -+ return; -+ } -+ -+ if(devname == NULL) { -+ printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n"); -+ return; -+ } -+ -+ printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname); -+ -+ list_for_each(pos, &g_cb_dgasp_list_head->list) { -+ tmp = list_entry(pos, CB_DGASP_LIST, list); -+ if(!strcmp(tmp->name, devname)) { -+ list_del(pos); -+ kfree(tmp); -+ printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname); -+ return; -+ } -+ } -+ printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname); -+ -+} /* kerSysDeregisterDyingGaspHandler */ -+ -+/*************************************************************************** -+ * MACRO to call driver initialization and cleanup functions. -+ ***************************************************************************/ -+module_init( brcm_board_init ); -+module_exit( brcm_board_cleanup ); -+ -+EXPORT_SYMBOL(kerSysNvRamGet); -+EXPORT_SYMBOL(dumpaddr); -+EXPORT_SYMBOL(kerSysGetMacAddress); -+EXPORT_SYMBOL(kerSysReleaseMacAddress); -+EXPORT_SYMBOL(kerSysGetSdramSize); -+EXPORT_SYMBOL(kerSysLedCtrl); -+EXPORT_SYMBOL(kerSysLedRegisterHwHandler); -+EXPORT_SYMBOL(BpGetBoardIds); -+EXPORT_SYMBOL(BpGetSdramSize); -+EXPORT_SYMBOL(BpGetPsiSize); -+EXPORT_SYMBOL(BpGetEthernetMacInfo); -+EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios); -+EXPORT_SYMBOL(BpGetPressAndHoldResetGpio); -+EXPORT_SYMBOL(BpGetVoipResetGpio); -+EXPORT_SYMBOL(BpGetVoipIntrGpio); -+EXPORT_SYMBOL(BpGetPcmciaResetGpio); -+EXPORT_SYMBOL(BpGetRtsCtsUartGpios); -+EXPORT_SYMBOL(BpGetAdslLedGpio); -+EXPORT_SYMBOL(BpGetAdslFailLedGpio); -+EXPORT_SYMBOL(BpGetWirelessLedGpio); -+EXPORT_SYMBOL(BpGetUsbLedGpio); -+EXPORT_SYMBOL(BpGetHpnaLedGpio); -+EXPORT_SYMBOL(BpGetWanDataLedGpio); -+EXPORT_SYMBOL(BpGetPppLedGpio); -+EXPORT_SYMBOL(BpGetPppFailLedGpio); -+EXPORT_SYMBOL(BpGetVoipLedGpio); -+EXPORT_SYMBOL(BpGetWirelessExtIntr); -+EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr); -+EXPORT_SYMBOL(BpGetVoipExtIntr); -+EXPORT_SYMBOL(BpGetHpnaExtIntr); -+EXPORT_SYMBOL(BpGetHpnaChipSelect); -+EXPORT_SYMBOL(BpGetVoipChipSelect); -+EXPORT_SYMBOL(BpGetWirelessSesBtnGpio); -+EXPORT_SYMBOL(BpGetWirelessSesExtIntr); -+EXPORT_SYMBOL(BpGetWirelessSesLedGpio); -+EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler); -+EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler); -+EXPORT_SYMBOL(kerSysGetCycleCount); -+EXPORT_SYMBOL(kerSysSetWdTimer); -+EXPORT_SYMBOL(kerSysWakeupMonitorTask); -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/cfiflash.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/cfiflash.c ---- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/cfiflash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/cfiflash.c 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,692 @@ -+/************************************************************************/ -+/* */ -+/* AMD CFI Enabled Flash Memory Drivers */ -+/* File name: CFIFLASH.C */ -+/* Revision: 1.0 5/07/98 */ -+/* */ -+/* Copyright (c) 1998 ADVANCED MICRO DEVICES, INC. All Rights Reserved. */ -+/* This software is unpublished and contains the trade secrets and */ -+/* confidential proprietary information of AMD. Unless otherwise */ -+/* provided in the Software Agreement associated herewith, it is */ -+/* licensed in confidence "AS IS" and is not to be reproduced in whole */ -+/* or part by any means except for backup. Use, duplication, or */ -+/* disclosure by the Government is subject to the restrictions in */ -+/* paragraph (b) (3) (B) of the Rights in Technical Data and Computer */ -+/* Software clause in DFAR 52.227-7013 (a) (Oct 1988). */ -+/* Software owned by */ -+/* Advanced Micro Devices, Inc., */ -+/* One AMD Place, */ -+/* P.O. Box 3453 */ -+/* Sunnyvale, CA 94088-3453. */ -+/************************************************************************/ -+/* This software constitutes a basic shell of source code for */ -+/* programming all AMD Flash components. AMD */ -+/* will not be responsible for misuse or illegal use of this */ -+/* software for devices not supported herein. AMD is providing */ -+/* this source code "AS IS" and will not be responsible for */ -+/* issues arising from incorrect user implementation of the */ -+/* source code herein. It is the user's responsibility to */ -+/* properly design-in this source code. */ -+/* */ -+/************************************************************************/ -+#ifdef _CFE_ -+#include "lib_types.h" -+#include "lib_printf.h" -+#include "lib_string.h" -+#include "cfe_timer.h" -+#define printk printf -+#else // linux -+#include -+#include -+#include -+#endif -+ -+#include "cfiflash.h" -+ -+static int flash_wait(WORD sector, int offset, UINT16 data); -+static UINT16 flash_get_device_id(void); -+static int flash_get_cfi(struct cfi_query *query, UINT16 *cfi_struct, int flashFamily); -+static int flash_write(WORD sector, int offset, byte *buf, int nbytes); -+static void flash_command(int command, WORD sector, int offset, UINT16 data); -+ -+/*********************************************************************/ -+/* 'meminfo' should be a pointer, but most C compilers will not */ -+/* allocate static storage for a pointer without calling */ -+/* non-portable functions such as 'new'. We also want to avoid */ -+/* the overhead of passing this pointer for every driver call. */ -+/* Systems with limited heap space will need to do this. */ -+/*********************************************************************/ -+struct flashinfo meminfo; /* Flash information structure */ -+static int flashFamily = FLASH_UNDEFINED; -+static int totalSize = 0; -+static struct cfi_query query; -+ -+static UINT16 cfi_data_struct_29W160[] = { -+ 0x0020, 0x0049, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x0051, 0x0052, 0x0059, 0x0002, 0x0000, 0x0040, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0027, 0x0036, 0x0000, 0x0000, 0x0004, -+ 0x0000, 0x000a, 0x0000, 0x0004, 0x0000, 0x0003, 0x0000, 0x0015, -+ 0x0002, 0x0000, 0x0000, 0x0000, 0x0004, 0x0000, 0x0000, 0x0040, -+ 0x0000, 0x0001, 0x0000, 0x0020, 0x0000, 0x0000, 0x0000, 0x0080, -+ 0x0000, 0x001e, 0x0000, 0x0000, 0x0001, 0xffff, 0xffff, 0xffff, -+ 0x0050, 0x0052, 0x0049, 0x0031, 0x0030, 0x0000, 0x0002, 0x0001, -+ 0x0001, 0x0004, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0x0002, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0x0888, 0x252b, 0x8c84, 0x7dbc, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff -+}; -+ -+ -+/*********************************************************************/ -+/* Init_flash is used to build a sector table from the information */ -+/* provided through the CFI query. This information is translated */ -+/* from erase_block information to base:offset information for each */ -+/* individual sector. This information is then stored in the meminfo */ -+/* structure, and used throughout the driver to access sector */ -+/* information. */ -+/* */ -+/* This is more efficient than deriving the sector base:offset */ -+/* information every time the memory map switches (since on the */ -+/* development platform can only map 64k at a time). If the entire */ -+/* flash memory array can be mapped in, then the addition static */ -+/* allocation for the meminfo structure can be eliminated, but the */ -+/* drivers will have to be re-written. */ -+/* */ -+/* The meminfo struct occupies 653 bytes of heap space, depending */ -+/* on the value of the define MAXSECTORS. Adjust to suit */ -+/* application */ -+/*********************************************************************/ -+byte flash_init(void) -+{ -+ int i=0, j=0, count=0; -+ int basecount=0L; -+ UINT16 device_id; -+ int flipCFIGeometry = FALSE; -+ -+ /* First, assume -+ * a single 8k sector for sector 0. This is to allow -+ * the system to perform memory mapping to the device, -+ * even though the actual physical layout is unknown. -+ * Once mapped in, the CFI query will produce all -+ * relevant information. -+ */ -+ meminfo.addr = 0L; -+ meminfo.areg = 0; -+ meminfo.nsect = 1; -+ meminfo.bank1start = 0; -+ meminfo.bank2start = 0; -+ -+ meminfo.sec[0].size = 8192; -+ meminfo.sec[0].base = 0x00000; -+ meminfo.sec[0].bank = 1; -+ -+ flash_command(FLASH_RESET, 0, 0, 0); -+ -+ device_id = flash_get_device_id(); -+ -+ switch (device_id) { -+ case ID_I28F160C3B: -+ case ID_I28F320C3B: -+ case ID_I28F160C3T: -+ case ID_I28F320C3T: -+ flashFamily = FLASH_INTEL; -+ break; -+ case ID_AM29DL800B: -+ case ID_AM29LV800B: -+ case ID_AM29LV400B: -+ case ID_AM29LV160B: -+ case ID_AM29LV320B: -+ case ID_MX29LV320AB: -+ case ID_AM29LV320MB: -+ case ID_AM29DL800T: -+ case ID_AM29LV800T: -+ case ID_AM29LV160T: -+ case ID_AM29LV320T: -+ case ID_MX29LV320AT: -+ case ID_AM29LV320MT: -+ flashFamily = FLASH_AMD; -+ break; -+ case ID_SST39VF1601: -+ case ID_SST39VF3201: -+ flashFamily = FLASH_SST; -+ break; -+ default: -+ printk("Flash memory not supported! Device id = %x\n", device_id); -+ return -1; -+ } -+ -+ if (flash_get_cfi(&query, 0, flashFamily) == -1) { -+ switch(device_id) { -+ case ID_AM29LV160T: -+ case ID_AM29LV160B: -+ flash_get_cfi(&query, cfi_data_struct_29W160, flashFamily); -+ break; -+ default: -+ printk("CFI data structure not found. Device id = %x\n", device_id); -+ return -1; -+ } -+ } -+ -+ // need to determine if it top or bottom boot here -+ switch (device_id) -+ { -+ case ID_AM29DL800B: -+ case ID_AM29LV800B: -+ case ID_AM29LV400B: -+ case ID_AM29LV160B: -+ case ID_AM29LV320B: -+ case ID_MX29LV320AB: -+ case ID_AM29LV320MB: -+ case ID_I28F160C3B: -+ case ID_I28F320C3B: -+ case ID_I28F160C3T: -+ case ID_I28F320C3T: -+ case ID_SST39VF1601: -+ case ID_SST39VF3201: -+ flipCFIGeometry = FALSE; -+ break; -+ case ID_AM29DL800T: -+ case ID_AM29LV800T: -+ case ID_AM29LV160T: -+ case ID_AM29LV320T: -+ case ID_MX29LV320AT: -+ case ID_AM29LV320MT: -+ flipCFIGeometry = TRUE; -+ break; -+ default: -+ printk("Flash memory not supported! Device id = %x\n", device_id); -+ return -1; -+ } -+ -+ count=0;basecount=0L; -+ -+ if (!flipCFIGeometry) -+ { -+ for (i=0; i= 0; i--) { -+ for(j=0; j relative_addr ) -+ { -+ blk_start--; // last blk, dec by 1 -+ } -+ else -+ if( blk_start == last_blk ) -+ { -+ printk("Address is too big.\n"); -+ blk_start = -1; -+ } -+ -+ return( blk_start ); -+} -+ -+/************************************************************************/ -+/* The purpose of flash_get_total_size() is to return the total size of */ -+/* the flash */ -+/************************************************************************/ -+int flash_get_total_size() -+{ -+ return totalSize; -+} -+ -+/*********************************************************************/ -+/* Flash_command() is the main driver function. It performs */ -+/* every possible command available to AMD B revision */ -+/* flash parts. Note that this command is not used directly, but */ -+/* rather called through the API wrapper functions provided below. */ -+/*********************************************************************/ -+static void flash_command(int command, WORD sector, int offset, UINT16 data) -+{ -+ volatile UINT16 *flashptr; -+ volatile UINT16 *flashbase; -+ -+ flashptr = (UINT16 *) flash_get_memptr(sector); -+ flashbase = (UINT16 *) flash_get_memptr(0); -+ -+ switch (flashFamily) { -+ case FLASH_UNDEFINED: -+ /* These commands should work for AMD, Intel and SST flashes */ -+ switch (command) { -+ case FLASH_RESET: -+ flashptr[0] = 0xF0; -+ flashptr[0] = 0xFF; -+ break; -+ case FLASH_READ_ID: -+ flashptr[0x5555] = 0xAA; /* unlock 1 */ -+ flashptr[0x2AAA] = 0x55; /* unlock 2 */ -+ flashptr[0x5555] = 0x90; -+ break; -+ default: -+ break; -+ } -+ break; -+ case FLASH_AMD: -+ switch (command) { -+ case FLASH_RESET: -+ flashptr[0] = 0xF0; -+ break; -+ case FLASH_READ_ID: -+ flashptr[0x555] = 0xAA; /* unlock 1 */ -+ flashptr[0x2AA] = 0x55; /* unlock 2 */ -+ flashptr[0x555] = 0x90; -+ break; -+ case FLASH_CFIQUERY: -+ flashptr[0x55] = 0x98; -+ break; -+ case FLASH_UB: -+ flashptr[0x555] = 0xAA; /* unlock 1 */ -+ flashptr[0x2AA] = 0x55; /* unlock 2 */ -+ flashptr[0x555] = 0x20; -+ break; -+ case FLASH_PROG: -+ flashptr[0] = 0xA0; -+ flashptr[offset/2] = data; -+ break; -+ case FLASH_UBRESET: -+ flashptr[0] = 0x90; -+ flashptr[0] = 0x00; -+ break; -+ case FLASH_SERASE: -+ flashptr[0x555] = 0xAA; /* unlock 1 */ -+ flashptr[0x2AA] = 0x55; /* unlock 2 */ -+ flashptr[0x555] = 0x80; -+ flashptr[0x555] = 0xAA; -+ flashptr[0x2AA] = 0x55; -+ flashptr[0] = 0x30; -+ break; -+ default: -+ break; -+ } -+ break; -+ case FLASH_INTEL: -+ switch (command) { -+ case FLASH_RESET: -+ flashptr[0] = 0xFF; -+ break; -+ case FLASH_READ_ID: -+ flashptr[0] = 0x90; -+ break; -+ case FLASH_CFIQUERY: -+ flashptr[0] = 0x98; -+ break; -+ case FLASH_PROG: -+ flashptr[0] = 0x40; -+ flashptr[offset/2] = data; -+ break; -+ case FLASH_SERASE: -+ flashptr[0] = 0x60; -+ flashptr[0] = 0xD0; -+ flashptr[0] = 0x20; -+ flashptr[0] = 0xD0; -+ break; -+ default: -+ break; -+ } -+ break; -+ case FLASH_SST: -+ switch (command) { -+ case FLASH_RESET: -+ flashbase[0x5555] = 0xAA; /* unlock 1 */ -+ flashbase[0x2AAA] = 0x55; /* unlock 2 */ -+ flashbase[0x5555] = 0xf0; -+ break; -+ case FLASH_READ_ID: -+ flashbase[0x5555] = 0xAA; /* unlock 1 */ -+ flashbase[0x2AAA] = 0x55; /* unlock 2 */ -+ flashbase[0x5555] = 0x90; -+ break; -+ case FLASH_CFIQUERY: -+ flashbase[0x5555] = 0xAA; /* unlock 1 */ -+ flashbase[0x2AAA] = 0x55; /* unlock 2 */ -+ flashbase[0x5555] = 0x98; -+ break; -+ case FLASH_UB: -+ break; -+ case FLASH_PROG: -+ flashbase[0x5555] = 0xAA; /* unlock 1 */ -+ flashbase[0x2AAA] = 0x55; /* unlock 2 */ -+ flashbase[0x5555] = 0xa0; -+ flashptr[offset/2] = data; -+ break; -+ case FLASH_UBRESET: -+ break; -+ case FLASH_SERASE: -+ flashbase[0x5555] = 0xAA; /* unlock 1 */ -+ flashbase[0x2AAA] = 0x55; /* unlock 2 */ -+ flashbase[0x5555] = 0x80; -+ flashbase[0x5555] = 0xAA; -+ flashbase[0x2AAA] = 0x55; -+ flashptr[0] = 0x30; -+ break; -+ default: -+ break; -+ } -+ break; -+ default: -+ break; -+ } -+} -+ -+/*********************************************************************/ -+/* flash_write extends the functionality of flash_program() by */ -+/* providing an faster way to program multiple data words, without */ -+/* needing the function overhead of looping algorithms which */ -+/* program word by word. This function utilizes fast pointers */ -+/* to quickly loop through bulk data. */ -+/*********************************************************************/ -+static int flash_write(WORD sector, int offset, byte *buf, int nbytes) -+{ -+ UINT16 *src; -+ src = (UINT16 *)buf; -+ -+ if ((nbytes | offset) & 1) { -+ return -1; -+ } -+ -+ flash_command(FLASH_UB, 0, 0, 0); -+ while (nbytes > 0) { -+ flash_command(FLASH_PROG, sector, offset, *src); -+ if (flash_wait(sector, offset, *src) != STATUS_READY) -+ break; -+ offset +=2; -+ nbytes -=2; -+ src++; -+ } -+ flash_command(FLASH_UBRESET, 0, 0, 0); -+ -+ return (byte*)src - buf; -+} -+ -+/*********************************************************************/ -+/* flash_wait utilizes the DQ6, DQ5, and DQ2 polling algorithms */ -+/* described in the flash data book. It can quickly ascertain the */ -+/* operational status of the flash device, and return an */ -+/* appropriate status code (defined in flash.h) */ -+/*********************************************************************/ -+static int flash_wait(WORD sector, int offset, UINT16 data) -+{ -+ volatile UINT16 *flashptr; /* flash window */ -+ UINT16 d1; -+ -+ flashptr = (UINT16 *) flash_get_memptr(sector); -+ -+ if (flashFamily == FLASH_AMD || flashFamily == FLASH_SST) { -+#if defined(_BCM96338_) || defined(CONFIG_BCM96338) -+ do { -+ d1 = flashptr[offset/2]; -+ if (d1 == data) -+ return STATUS_READY; -+ } while (!(d1 & 0x20)); -+ -+ d1 = flashptr[offset/2]; -+ -+ if (d1 != data) { -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return STATUS_TIMEOUT; -+ } -+#else -+ do { -+ d1 = *flashptr; /* read data */ -+ d1 ^= *flashptr; /* read it again and see what toggled */ -+ if (d1 == 0) /* no toggles, nothing's happening */ -+ return STATUS_READY; -+ } while (!(d1 & 0x20)); -+ -+ d1 = *flashptr; /* read data */ -+ d1 ^= *flashptr; /* read it again and see what toggled */ -+ -+ if (d1 != 0) { -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return STATUS_TIMEOUT; -+ } -+#endif -+ } else if (flashFamily == FLASH_INTEL) { -+ flashptr[0] = 0x70; -+ /* Wait for completion */ -+ while(!(*flashptr & 0x80)); -+ if (*flashptr & 0x30) { -+ flashptr[0] = 0x50; -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return STATUS_TIMEOUT; -+ } -+ flashptr[0] = 0x50; -+ flash_command(FLASH_RESET, 0, 0, 0); -+ } -+ -+ return STATUS_READY; -+} -+ -+/*********************************************************************/ -+/* flash_get_device_id() will perform an autoselect sequence on the */ -+/* flash device, and return the device id of the component. */ -+/* This function automatically resets to read mode. */ -+/*********************************************************************/ -+static UINT16 flash_get_device_id() -+{ -+ volatile UINT16 *fwp; /* flash window */ -+ UINT16 answer; -+ -+ fwp = (UINT16 *)flash_get_memptr(0); -+ -+ flash_command(FLASH_READ_ID, 0, 0, 0); -+ answer = *(fwp + 1); -+ if (answer == ID_AM29LV320M) { -+ answer = *(fwp + 0xe); -+ answer = *(fwp + 0xf); -+ } -+ -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return( (UINT16) answer ); -+} -+ -+/*********************************************************************/ -+/* flash_get_cfi() is the main CFI workhorse function. Due to it's */ -+/* complexity and size it need only be called once upon */ -+/* initializing the flash system. Once it is called, all operations */ -+/* are performed by looking at the meminfo structure. */ -+/* All possible care was made to make this algorithm as efficient as */ -+/* possible. 90% of all operations are memory reads, and all */ -+/* calculations are done using bit-shifts when possible */ -+/*********************************************************************/ -+static int flash_get_cfi(struct cfi_query *query, UINT16 *cfi_struct, int flashFamily) -+{ -+ volatile UINT16 *fwp; /* flash window */ -+ int i=0; -+ -+ flash_command(FLASH_CFIQUERY, 0, 0, 0); -+ -+ if (cfi_struct == 0) -+ fwp = (UINT16 *)flash_get_memptr(0); -+ else -+ fwp = cfi_struct; -+ -+ /* Initial house-cleaning */ -+ for(i=0; i < 8; i++) { -+ query->erase_block[i].sector_size = 0; -+ query->erase_block[i].num_sectors = 0; -+ } -+ -+ /* If not 'QRY', then we dont have a CFI enabled device in the socket */ -+ if( fwp[0x10] != 'Q' && -+ fwp[0x11] != 'R' && -+ fwp[0x12] != 'Y') { -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return(-1); -+ } -+ -+ query->num_erase_blocks = fwp[0x2C]; -+ if(flashFamily == FLASH_SST) -+ query->num_erase_blocks = 1; -+ -+ for(i=0; i < query->num_erase_blocks; i++) { -+ query->erase_block[i].num_sectors = fwp[(0x2D+(4*i))] + (fwp[0x2E + (4*i)] << 8); -+ query->erase_block[i].num_sectors++; -+ query->erase_block[i].sector_size = 256 * (256 * fwp[(0x30+(4*i))] + fwp[(0x2F+(4*i))]); -+ } -+ -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return(1); -+} -diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/cfiflash.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/cfiflash.h ---- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/cfiflash.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/cfiflash.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,150 @@ -+/************************************************************************/ -+/* */ -+/* AMD CFI Enabled Flash Memory Drivers */ -+/* File name: CFIFLASH.H */ -+/* Revision: 1.0 5/07/98 */ -+/* */ -+/* Copyright (c) 1998 ADVANCED MICRO DEVICES, INC. All Rights Reserved. */ -+/* This software is unpublished and contains the trade secrets and */ -+/* confidential proprietary information of AMD. Unless otherwise */ -+/* provided in the Software Agreement associated herewith, it is */ -+/* licensed in confidence "AS IS" and is not to be reproduced in whole */ -+/* or part by any means except for backup. Use, duplication, or */ -+/* disclosure by the Government is subject to the restrictions in */ -+/* paragraph (b) (3) (B) of the Rights in Technical Data and Computer */ -+/* Software clause in DFAR 52.227-7013 (a) (Oct 1988). */ -+/* Software owned by */ -+/* Advanced Micro Devices, Inc., */ -+/* One AMD Place, */ -+/* P.O. Box 3453 */ -+/* Sunnyvale, CA 94088-3453. */ -+/************************************************************************/ -+/* This software constitutes a basic shell of source code for */ -+/* programming all AMD Flash components. AMD */ -+/* will not be responsible for misuse or illegal use of this */ -+/* software for devices not supported herein. AMD is providing */ -+/* this source code "AS IS" and will not be responsible for */ -+/* issues arising from incorrect user implementation of the */ -+/* source code herein. It is the user's responsibility to */ -+/* properly design-in this source code. */ -+/* */ -+/************************************************************************/ -+#ifndef _CFIFLASH_H -+#define _CFIFLASH_H -+ -+#if defined __cplusplus -+extern "C" { -+#endif -+ -+/* include board/CPU specific definitions */ -+#include "bcmtypes.h" -+#include "board.h" -+ -+#define FLASH_BASE_ADDR_REG FLASH_BASE -+ -+#ifndef NULL -+#define NULL 0 -+#endif -+ -+#define MAXSECTORS 1024 /* maximum number of sectors supported */ -+ -+/* A structure for identifying a flash part. There is one for each -+ * of the flash part definitions. We need to keep track of the -+ * sector organization, the address register used, and the size -+ * of the sectors. -+ */ -+struct flashinfo { -+ char *name; /* "Am29DL800T", etc. */ -+ unsigned long addr; /* physical address, once translated */ -+ int areg; /* Can be set to zero for all parts */ -+ int nsect; /* # of sectors -- 19 in LV, 22 in DL */ -+ int bank1start; /* first sector # in bank 1 */ -+ int bank2start; /* first sector # in bank 2, if DL part */ -+ struct { -+ long size; /* # of bytes in this sector */ -+ long base; /* offset from beginning of device */ -+ int bank; /* 1 or 2 for DL; 1 for LV */ -+ } sec[MAXSECTORS]; /* per-sector info */ -+}; -+ -+/* -+ * This structure holds all CFI query information as defined -+ * in the JEDEC standard. All information up to -+ * primary_extended_query is standard among all manufactures -+ * with CFI enabled devices. -+ */ -+ -+struct cfi_query { -+ int num_erase_blocks; /* Number of sector defs. */ -+ struct { -+ unsigned long sector_size; /* byte size of sector */ -+ int num_sectors; /* Num sectors of this size */ -+ } erase_block[8]; /* Max of 256, but 8 is good */ -+}; -+ -+/* Standard Boolean declarations */ -+#define TRUE 1 -+#define FALSE 0 -+ -+/* Define different type of flash */ -+#define FLASH_UNDEFINED 0 -+#define FLASH_AMD 1 -+#define FLASH_INTEL 2 -+#define FLASH_SST 3 -+ -+/* Command codes for the flash_command routine */ -+#define FLASH_RESET 0 /* reset to read mode */ -+#define FLASH_READ_ID 1 /* read device ID */ -+#define FLASH_CFIQUERY 2 /* CFI query */ -+#define FLASH_UB 3 /* go into unlock bypass mode */ -+#define FLASH_PROG 4 /* program a word */ -+#define FLASH_UBRESET 5 /* reset to read mode from unlock bypass mode */ -+#define FLASH_SERASE 6 /* sector erase */ -+ -+/* Return codes from flash_status */ -+#define STATUS_READY 0 /* ready for action */ -+#define STATUS_TIMEOUT 1 /* operation timed out */ -+ -+/* A list of AMD compatible device ID's - add others as needed */ -+#define ID_AM29DL800T 0x224A -+#define ID_AM29DL800B 0x22CB -+#define ID_AM29LV800T 0x22DA -+#define ID_AM29LV800B 0x225B -+#define ID_AM29LV400B 0x22BA -+ -+#define ID_AM29LV160B 0x2249 -+#define ID_AM29LV160T 0x22C4 -+ -+#define ID_AM29LV320T 0x22F6 -+#define ID_MX29LV320AT 0x22A7 -+#define ID_AM29LV320B 0x22F9 -+#define ID_MX29LV320AB 0x22A8 -+ -+#define ID_AM29LV320M 0x227E -+#define ID_AM29LV320MB 0x2200 -+#define ID_AM29LV320MT 0x2201 -+ -+#define ID_SST39VF1601 0x234B -+#define ID_SST39VF3201 0x235B -+ -+/* A list of Intel compatible device ID's - add others as needed */ -+#define ID_I28F160C3T 0x88C2 -+#define ID_I28F160C3B 0x88C3 -+#define ID_I28F320C3T 0x88C4 -+#define ID_I28F320C3B 0x88C5 -+ -+extern byte flash_init(void); -+extern int flash_write_buf(WORD sector, int offset, byte *buffer, int numbytes); -+extern int flash_read_buf(WORD sector, int offset, byte *buffer, int numbytes); -+extern byte flash_sector_erase_int(WORD sector); -+extern int flash_get_numsectors(void); -+extern int flash_get_sector_size(WORD sector); -+extern int flash_get_total_size(void); -+extern unsigned char *flash_get_memptr(WORD sector); -+extern int flash_get_blk(int addr); -+ -+#if defined __cplusplus -+} -+#endif -+ -+#endif -diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/serial/bcm96348/Makefile linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/serial/bcm96348/Makefile ---- linux-2.6.8.1/bcmdrivers/opensource/char/serial/bcm96348/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/serial/bcm96348/Makefile 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,13 @@ -+# File: bcmdrivers/opensource/char/serial -+# -+# Makefile for the BCM63xx serial/console driver -+ -+obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o -+ -+EXTRA_CFLAGS += -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD) -+ -+-include $(TOPDIR)/Rules.make -+ -+clean: -+ rm -f core *.o *.a *.s -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/serial/bcm96348/bcm63xx_cons.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/serial/bcm96348/bcm63xx_cons.c ---- linux-2.6.8.1/bcmdrivers/opensource/char/serial/bcm96348/bcm63xx_cons.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/serial/bcm96348/bcm63xx_cons.c 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,1035 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+/* Description: Serial port driver for the BCM963XX. */ -+ -+#define CARDNAME "bcm963xx_serial driver" -+#define VERSION "2.0" -+#define VER_STR CARDNAME " v" VERSION "\n" -+ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* for definition of struct console */ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+extern void _putc(char); -+extern void _puts(const char *); -+ -+typedef struct bcm_serial { -+ volatile Uart * port; -+ int type; -+ int flags; -+ int irq; -+ int baud_base; -+ int blocked_open; -+ unsigned short close_delay; -+ unsigned short closing_wait; -+ unsigned short line; /* port/line number */ -+ unsigned short cflags; /* line configuration flag */ -+ unsigned short x_char; /* xon/xoff character */ -+ unsigned short read_status_mask; /* mask for read condition */ -+ unsigned short ignore_status_mask; /* mask for ignore condition */ -+ unsigned long event; /* mask used in BH */ -+ int xmit_head; /* Position of the head */ -+ int xmit_tail; /* Position of the tail */ -+ int xmit_cnt; /* Count of the chars in the buffer */ -+ int count; /* indicates how many times it has been opened */ -+ int magic; -+ -+ struct async_icount icount; /* keep track of things ... */ -+ struct tty_struct *tty; /* tty associated */ -+ struct termios normal_termios; -+ -+ wait_queue_head_t open_wait; -+ wait_queue_head_t close_wait; -+ -+ long session; /* Session of opening process */ -+ long pgrp; /* pgrp of opening process */ -+ -+ unsigned char is_initialized; -+} Context; -+ -+ -+/*---------------------------------------------------------------------*/ -+/* Define bits in the Interrupt Enable register */ -+/*---------------------------------------------------------------------*/ -+/* Enable receive interrupt */ -+#define RXINT (RXFIFONE|RXOVFERR) -+ -+/* Enable transmit interrupt */ -+#define TXINT (TXFIFOEMT|TXUNDERR|TXOVFERR) -+ -+/* Enable receiver line status interrupt */ -+#define LSINT (RXBRK|RXPARERR|RXFRAMERR) -+ -+#define BCM_NUM_UARTS 1 -+ -+#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH) -+ -+ -+static struct bcm_serial multi[BCM_NUM_UARTS]; -+static struct bcm_serial *lines[BCM_NUM_UARTS]; -+static struct tty_driver serial_driver; -+static struct tty_struct *serial_table[BCM_NUM_UARTS]; -+static struct termios *serial_termios[BCM_NUM_UARTS]; -+static struct termios *serial_termios_locked[BCM_NUM_UARTS]; -+static int serial_refcount; -+ -+ -+static void bcm_stop (struct tty_struct *tty); -+static void bcm_start (struct tty_struct *tty); -+static inline void receive_chars (struct bcm_serial * info); -+static int startup (struct bcm_serial *info); -+static void shutdown (struct bcm_serial * info); -+static void change_speed( volatile Uart *pUart, tcflag_t cFlag ); -+static void bcm63xx_cons_flush_chars (struct tty_struct *tty); -+static int bcm63xx_cons_write (struct tty_struct *tty, int from_user, -+ const unsigned char *buf, int count); -+static int bcm63xx_cons_write_room (struct tty_struct *tty); -+static int bcm_chars_in_buffer (struct tty_struct *tty); -+static void bcm_flush_buffer (struct tty_struct *tty); -+static void bcm_throttle (struct tty_struct *tty); -+static void bcm_unthrottle (struct tty_struct *tty); -+static void bcm_send_xchar (struct tty_struct *tty, char ch); -+static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo); -+static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info); -+static int get_lsr_info (struct bcm_serial *info, unsigned int *value); -+static void send_break (struct bcm_serial *info, int duration); -+static int bcm_ioctl (struct tty_struct * tty, struct file * file, -+ unsigned int cmd, unsigned long arg); -+static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios); -+static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp); -+static void bcm_hangup (struct tty_struct *tty); -+static int block_til_ready (struct tty_struct *tty, struct file *filp, struct bcm_serial *info); -+static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp); -+static int __init bcm63xx_serialinit(void); -+ -+ -+/* -+ * ------------------------------------------------------------ -+ * rs_stop () and rs_start () -+ * -+ * These routines are called before setting or resetting -+ * tty->stopped. They enable or disable transmitter interrupts, -+ * as necessary. -+ * ------------------------------------------------------------ -+ */ -+static void bcm_stop (struct tty_struct *tty) -+{ -+} -+ -+static void bcm_start (struct tty_struct *tty) -+{ -+ _puts(CARDNAME " Start\n"); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * receive_char () -+ * -+ * This routine deals with inputs from any lines. -+ * ------------------------------------------------------------ -+ */ -+static inline void receive_chars (struct bcm_serial * info) -+{ -+ struct tty_struct *tty = 0; -+ struct async_icount * icount; -+ int ignore = 0; -+ unsigned short status, tmp; -+ UCHAR ch = 0; -+ while ((status = info->port->intStatus) & RXINT) -+ { -+ if (status & RXFIFONE) -+ ch = info->port->Data; // Read the character -+ tty = info->tty; /* now tty points to the proper dev */ -+ icount = &info->icount; -+ if (! tty) -+ break; -+ if (tty->flip.count >= TTY_FLIPBUF_SIZE) -+ break; -+ *tty->flip.char_buf_ptr = ch; -+ *tty->flip.flag_buf_ptr = 0; -+ icount->rx++; -+ if (status & RXBRK) -+ { -+ *tty->flip.flag_buf_ptr = TTY_BREAK; -+ icount->brk++; -+ } -+ // keep track of the statistics -+ if (status & (RXFRAMERR | RXPARERR | RXOVFERR)) -+ { -+ if (status & RXPARERR) /* parity error */ -+ icount->parity++; -+ else -+ if (status & RXFRAMERR) /* frame error */ -+ icount->frame++; -+ if (status & RXOVFERR) -+ { -+ // Overflow. Reset the RX FIFO -+ info->port->fifoctl |= RSTRXFIFOS; -+ icount->overrun++; -+ } -+ // check to see if we should ignore the character -+ // and mask off conditions that should be ignored -+ if (status & info->ignore_status_mask) -+ { -+ if (++ignore > 100 ) -+ break; -+ goto ignore_char; -+ } -+ // Mask off the error conditions we want to ignore -+ tmp = status & info->read_status_mask; -+ if (tmp & RXPARERR) -+ { -+ *tty->flip.flag_buf_ptr = TTY_PARITY; -+ } -+ else -+ if (tmp & RXFRAMERR) -+ { -+ *tty->flip.flag_buf_ptr = TTY_FRAME; -+ } -+ if (tmp & RXOVFERR) -+ { -+ if (tty->flip.count < TTY_FLIPBUF_SIZE) -+ { -+ tty->flip.count++; -+ tty->flip.flag_buf_ptr++; -+ tty->flip.char_buf_ptr++; -+ *tty->flip.flag_buf_ptr = TTY_OVERRUN; -+ } -+ } -+ } -+ tty->flip.flag_buf_ptr++; -+ tty->flip.char_buf_ptr++; -+ tty->flip.count++; -+ } -+ignore_char: -+ if (tty) -+ tty_flip_buffer_push(tty); -+} -+ -+ -+/* -+ * ------------------------------------------------------------ -+ * bcm_interrupt () -+ * -+ * this is the main interrupt routine for the chip. -+ * It deals with the multiple ports. -+ * ------------------------------------------------------------ -+ */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+static irqreturn_t bcm_interrupt (int irq, void * dev, struct pt_regs * regs) -+#else -+static void bcm_interrupt (int irq, void * dev, struct pt_regs * regs) -+#endif -+{ -+ struct bcm_serial * info = lines[0]; -+ UINT16 intStat; -+ -+ /* get pending interrupt flags from UART */ -+ -+ /* Mask with only the serial interrupts that are enabled */ -+ intStat = info->port->intStatus & info->port->intMask; -+ while (intStat) -+ { -+ if (intStat & RXINT) -+ receive_chars (info); -+ else -+ if (intStat & TXINT) -+ info->port->intStatus = TXINT; -+ else /* don't know what it was, so let's mask it */ -+ info->port->intMask &= ~intStat; -+ -+ intStat = info->port->intStatus & info->port->intMask; -+ } -+ -+ // Clear the interrupt -+ BcmHalInterruptEnable (INTERRUPT_ID_UART); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ return IRQ_HANDLED; -+#endif -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * startup () -+ * -+ * various initialization tasks -+ * ------------------------------------------------------------------- -+ */ -+static int startup (struct bcm_serial *info) -+{ -+ // Port is already started... -+ return 0; -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * shutdown () -+ * -+ * This routine will shutdown a serial port; interrupts are disabled, and -+ * DTR is dropped if the hangup on close termio flag is on. -+ * ------------------------------------------------------------------- -+ */ -+static void shutdown (struct bcm_serial * info) -+{ -+ unsigned long flags; -+ if (!info->is_initialized) -+ return; -+ -+ save_flags (flags); -+ cli (); -+ -+ info->port->control &= ~(BRGEN|TXEN|RXEN); -+ if (info->tty) -+ set_bit (TTY_IO_ERROR, &info->tty->flags); -+ info->is_initialized = 0; -+ -+ restore_flags (flags); -+} -+/* -+ * ------------------------------------------------------------------- -+ * change_speed () -+ * -+ * Set the baud rate, character size, parity and stop bits. -+ * ------------------------------------------------------------------- -+ */ -+static void change_speed( volatile Uart *pUart, tcflag_t cFlag ) -+{ -+ unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp; -+ save_flags(ulFlags); -+ cli(); -+ switch( cFlag & (CBAUD | CBAUDEX) ) -+ { -+ case B115200: -+ ulBaud = 115200; -+ break; -+ case B57600: -+ ulBaud = 57600; -+ break; -+ case B38400: -+ ulBaud = 38400; -+ break; -+ case B19200: -+ ulBaud = 19200; -+ break; -+ case B9600: -+ ulBaud = 9600; -+ break; -+ case B4800: -+ ulBaud = 4800; -+ break; -+ case B2400: -+ ulBaud = 2400; -+ break; -+ case B1800: -+ ulBaud = 1800; -+ break; -+ case B1200: -+ ulBaud = 1200; -+ break; -+ case B600: -+ ulBaud = 600; -+ break; -+ case B300: -+ ulBaud = 300; -+ break; -+ case B200: -+ ulBaud = 200; -+ break; -+ case B150: -+ ulBaud = 150; -+ break; -+ case B134: -+ ulBaud = 134; -+ break; -+ case B110: -+ ulBaud = 110; -+ break; -+ case B75: -+ ulBaud = 75; -+ break; -+ case B50: -+ ulBaud = 50; -+ break; -+ default: -+ ulBaud = 115200; -+ break; -+ } -+ -+ /* Calculate buad rate. */ -+ ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT; -+ ulTmp = (ulClockFreqHz / ulBaud) / 16; -+ if( ulTmp & 0x01 ) -+ ulTmp /= 2; /* Rounding up, so sub is already accounted for */ -+ else -+ ulTmp = (ulTmp / 2) - 1; /* Rounding down so we must sub 1 */ -+ pUart->baudword = ulTmp; -+ -+ /* Set character size, stop bits and parity. */ -+ switch( cFlag & CSIZE ) -+ { -+ case CS5: -+ ulTmp = BITS5SYM; /* select transmit 5 bit data size */ -+ break; -+ case CS6: -+ ulTmp = BITS6SYM; /* select transmit 6 bit data size */ -+ break; -+ case CS7: -+ ulTmp = BITS7SYM; /* select transmit 7 bit data size */ -+ break; -+ /*case CS8:*/ -+ default: -+ ulTmp = BITS8SYM; /* select transmit 8 bit data size */ -+ break; -+ } -+ if( cFlag & CSTOPB ) -+ ulTmp |= TWOSTOP; /* select 2 stop bits */ -+ else -+ ulTmp |= ONESTOP; /* select one stop bit */ -+ -+ /* Write these values into the config reg. */ -+ pUart->config = ulTmp; -+ pUart->control &= ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN); -+ switch( cFlag & (PARENB | PARODD) ) -+ { -+ case PARENB|PARODD: -+ pUart->control |= RXPARITYEN | TXPARITYEN; -+ break; -+ case PARENB: -+ pUart->control |= RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN; -+ break; -+ default: -+ pUart->control |= 0; -+ break; -+ } -+ -+ /* Reset and flush uart */ -+ pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS; -+ restore_flags( ulFlags ); -+} -+ -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm_flush_char () -+ * -+ * Nothing to flush. Polled I/O is used. -+ * ------------------------------------------------------------------- -+ */ -+static void bcm63xx_cons_flush_chars (struct tty_struct *tty) -+{ -+} -+ -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm63xx_cons_write () -+ * -+ * Main output routine using polled I/O. -+ * ------------------------------------------------------------------- -+ */ -+static int bcm63xx_cons_write (struct tty_struct *tty, int from_user, -+ const unsigned char *buf, int count) -+{ -+ int c; -+ -+ for (c = 0; c < count; c++) -+ _putc(buf[c]); -+ return count; -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm63xx_cons_write_room () -+ * -+ * Compute the amount of space available for writing. -+ * ------------------------------------------------------------------- -+ */ -+static int bcm63xx_cons_write_room (struct tty_struct *tty) -+{ -+ /* Pick a number. Any number. Polled I/O is used. */ -+ return 1024; -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm_chars_in_buffer () -+ * -+ * compute the amount of char left to be transmitted -+ * ------------------------------------------------------------------- -+ */ -+static int bcm_chars_in_buffer (struct tty_struct *tty) -+{ -+ return 0; -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm_flush_buffer () -+ * -+ * Empty the output buffer -+ * ------------------------------------------------------------------- -+ */ -+static void bcm_flush_buffer (struct tty_struct *tty) -+{ -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * bcm_throttle () and bcm_unthrottle () -+ * -+ * This routine is called by the upper-layer tty layer to signal that -+ * incoming characters should be throttled (or not). -+ * ------------------------------------------------------------ -+ */ -+static void bcm_throttle (struct tty_struct *tty) -+{ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ if (I_IXOFF(tty)) -+ info->x_char = STOP_CHAR(tty); -+} -+ -+static void bcm_unthrottle (struct tty_struct *tty) -+{ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ if (I_IXOFF(tty)) -+ { -+ if (info->x_char) -+ info->x_char = 0; -+ else -+ info->x_char = START_CHAR(tty); -+ } -+} -+ -+static void bcm_send_xchar (struct tty_struct *tty, char ch) -+{ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ info->x_char = ch; -+ if (ch) -+ bcm_start (info->tty); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * rs_ioctl () and friends -+ * ------------------------------------------------------------ -+ */ -+static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo) -+{ -+ struct serial_struct tmp; -+ -+ if (!retinfo) -+ return -EFAULT; -+ -+ memset (&tmp, 0, sizeof(tmp)); -+ tmp.type = info->type; -+ tmp.line = info->line; -+ tmp.port = (int) info->port; -+ tmp.irq = info->irq; -+ tmp.flags = 0; -+ tmp.baud_base = info->baud_base; -+ tmp.close_delay = info->close_delay; -+ tmp.closing_wait = info->closing_wait; -+ -+ return copy_to_user (retinfo, &tmp, sizeof(*retinfo)); -+} -+ -+static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info) -+{ -+ struct serial_struct new_serial; -+ struct bcm_serial old_info; -+ int retval = 0; -+ -+ if (!new_info) -+ return -EFAULT; -+ -+ copy_from_user (&new_serial, new_info, sizeof(new_serial)); -+ old_info = *info; -+ -+ if (!capable(CAP_SYS_ADMIN)) -+ return -EPERM; -+ -+ -+ if (info->count > 1) -+ return -EBUSY; -+ -+ /* OK, past this point, all the error checking has been done. -+ * At this point, we start making changes..... -+ */ -+ info->baud_base = new_serial.baud_base; -+ info->type = new_serial.type; -+ info->close_delay = new_serial.close_delay; -+ info->closing_wait = new_serial.closing_wait; -+ retval = startup (info); -+ return retval; -+} -+ -+/* -+ * get_lsr_info - get line status register info -+ * -+ * Purpose: Let user call ioctl() to get info when the UART physically -+ * is emptied. On bus types like RS485, the transmitter must -+ * release the bus after transmitting. This must be done when -+ * the transmit shift register is empty, not be done when the -+ * transmit holding register is empty. This functionality -+ * allows an RS485 driver to be written in user space. -+ */ -+static int get_lsr_info (struct bcm_serial *info, unsigned int *value) -+{ -+ return( 0 ); -+} -+ -+/* -+ * This routine sends a break character out the serial port. -+ */ -+static void send_break (struct bcm_serial *info, int duration) -+{ -+ unsigned long flags; -+ -+ if (!info->port) -+ return; -+ -+ current->state = TASK_INTERRUPTIBLE; -+ -+ save_flags (flags); -+ cli(); -+ -+ info->port->control |= XMITBREAK; -+ schedule_timeout(duration); -+ info->port->control &= ~XMITBREAK; -+ -+ restore_flags (flags); -+} -+ -+static int bcm_ioctl (struct tty_struct * tty, struct file * file, -+ unsigned int cmd, unsigned long arg) -+{ -+ int error; -+ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data; -+ int retval; -+ -+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && -+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && -+ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) -+ { -+ if (tty->flags & (1 << TTY_IO_ERROR)) -+ return -EIO; -+ } -+ switch (cmd) -+ { -+ -+ case TCSBRK: /* SVID version: non-zero arg --> no break */ -+ retval = tty_check_change (tty); -+ if (retval) -+ return retval; -+ tty_wait_until_sent (tty, 0); -+ if (!arg) -+ send_break (info, HZ/4); /* 1/4 second */ -+ return 0; -+ -+ case TCSBRKP: /* support for POSIX tcsendbreak() */ -+ retval = tty_check_change (tty); -+ if (retval) -+ return retval; -+ tty_wait_until_sent (tty, 0); -+ send_break (info, arg ? arg*(HZ/10) : HZ/4); -+ return 0; -+ -+ case TIOCGSOFTCAR: -+ error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(long)); -+ if (error) -+ return error; -+ put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg); -+ return 0; -+ -+ case TIOCSSOFTCAR: -+ error = get_user (arg, (unsigned long *)arg); -+ if (error) -+ return error; -+ tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); -+ return 0; -+ -+ case TIOCGSERIAL: -+ error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct)); -+ if (error) -+ return error; -+ return get_serial_info (info, (struct serial_struct *)arg); -+ -+ case TIOCSSERIAL: -+ return set_serial_info (info, (struct serial_struct *) arg); -+ -+ case TIOCSERGETLSR: /* Get line status register */ -+ error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(unsigned int)); -+ if (error) -+ return error; -+ else -+ return get_lsr_info (info, (unsigned int *)arg); -+ -+ case TIOCSERGSTRUCT: -+ error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(struct bcm_serial)); -+ if (error) -+ return error; -+ copy_to_user((struct bcm_serial *)arg, info, sizeof(struct bcm_serial)); -+ return 0; -+ -+ default: -+ return -ENOIOCTLCMD; -+ } -+ return 0; -+} -+ -+static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios) -+{ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ -+ if( tty->termios->c_cflag != old_termios->c_cflag ) -+ change_speed (info->port, tty->termios->c_cflag); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * bcm63xx_cons_close() -+ * -+ * This routine is called when the serial port gets closed. First, we -+ * wait for the last remaining data to be sent. Then, we turn off -+ * the transmit enable and receive enable flags. -+ * ------------------------------------------------------------ -+ */ -+static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp) -+{ -+ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data; -+ unsigned long flags; -+ -+ if (!info) -+ return; -+ -+ save_flags (flags); -+ cli(); -+ -+ if (tty_hung_up_p (filp)) -+ { -+ restore_flags (flags); -+ return; -+ } -+ -+ if ((tty->count == 1) && (info->count != 1)) -+ { -+ -+ /* Uh, oh. tty->count is 1, which means that the tty -+ * structure will be freed. Info->count should always -+ * be one in these conditions. If it's greater than -+ * one, we've got real problems, since it means the -+ * serial port won't be shutdown. -+ */ -+ printk("bcm63xx_cons_close: bad serial port count; tty->count is 1, " -+ "info->count is %d\n", info->count); -+ info->count = 1; -+ } -+ -+ if (--info->count < 0) -+ { -+ printk("ds_close: bad serial port count for ttys%d: %d\n", -+ info->line, info->count); -+ info->count = 0; -+ } -+ -+ if (info->count) -+ { -+ restore_flags (flags); -+ return; -+ } -+ -+ /* Now we wait for the transmit buffer to clear; and we notify -+ * the line discipline to only process XON/XOFF characters. -+ */ -+ tty->closing = 1; -+ -+ /* At this point we stop accepting input. To do this, we -+ * disable the receive line status interrupts. -+ */ -+ shutdown (info); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ if (tty->driver->flush_buffer) -+ tty->driver->flush_buffer (tty); -+#else -+ if (tty->driver.flush_buffer) -+ tty->driver.flush_buffer (tty); -+#endif -+ if (tty->ldisc.flush_buffer) -+ tty->ldisc.flush_buffer (tty); -+ -+ tty->closing = 0; -+ info->event = 0; -+ info->tty = 0; -+ if (tty->ldisc.num != ldiscs[N_TTY].num) -+ { -+ if (tty->ldisc.close) -+ (tty->ldisc.close)(tty); -+ tty->ldisc = ldiscs[N_TTY]; -+ tty->termios->c_line = N_TTY; -+ if (tty->ldisc.open) -+ (tty->ldisc.open)(tty); -+ } -+ if (info->blocked_open) -+ { -+ if (info->close_delay) -+ { -+ current->state = TASK_INTERRUPTIBLE; -+ schedule_timeout(info->close_delay); -+ } -+ wake_up_interruptible (&info->open_wait); -+ } -+ wake_up_interruptible (&info->close_wait); -+ -+ restore_flags (flags); -+} -+ -+/* -+ * bcm_hangup () --- called by tty_hangup() when a hangup is signaled. -+ */ -+static void bcm_hangup (struct tty_struct *tty) -+{ -+ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ -+ shutdown (info); -+ info->event = 0; -+ info->count = 0; -+ info->tty = 0; -+ wake_up_interruptible (&info->open_wait); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * rs_open() and friends -+ * ------------------------------------------------------------ -+ */ -+static int block_til_ready (struct tty_struct *tty, struct file *filp, -+ struct bcm_serial *info) -+{ -+ return 0; -+} -+ -+/* -+ * This routine is called whenever a serial port is opened. It -+ * enables interrupts for a serial port. It also performs the -+ * serial-specific initialization for the tty structure. -+ */ -+static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp) -+{ -+ struct bcm_serial *info; -+ int retval, line; -+ -+ // Make sure we're only opening on of the ports we support -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start; -+#else -+ line = MINOR(tty->device) - tty->driver.minor_start; -+#endif -+ -+ if ((line < 0) || (line >= BCM_NUM_UARTS)) -+ return -ENODEV; -+ -+ info = lines[line]; -+ -+ info->port->intMask = 0; /* Clear any pending interrupts */ -+ info->port->intMask = RXINT; /* Enable RX */ -+ -+ info->count++; -+ tty->driver_data = info; -+ info->tty = tty; -+ BcmHalInterruptEnable (INTERRUPT_ID_UART); -+ -+ // Start up serial port -+ retval = startup (info); -+ if (retval) -+ return retval; -+ -+ retval = block_til_ready (tty, filp, info); -+ if (retval) -+ return retval; -+ -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ info->pgrp = process_group(current); -+ info->session = current->signal->session; -+#else -+ info->session = current->session; -+ info->pgrp = current->pgrp; -+#endif -+ -+ return 0; -+} -+ -+/* -------------------------------------------------------------------------- -+ Name: bcm63xx_serialinit -+ Purpose: Initialize our BCM63xx serial driver -+-------------------------------------------------------------------------- */ -+static int __init bcm63xx_serialinit(void) -+{ -+ int i, flags; -+ struct bcm_serial * info; -+ -+ // Print the driver version information -+ printk(VER_STR); -+ -+ memset(&serial_driver, 0, sizeof(struct tty_driver)); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ serial_driver.owner = THIS_MODULE; -+ serial_driver.devfs_name = "tts/"; -+#endif -+ serial_driver.magic = TTY_DRIVER_MAGIC; -+ serial_driver.name = "ttyS"; -+ serial_driver.major = TTY_MAJOR; -+ serial_driver.minor_start = 64; -+ serial_driver.num = BCM_NUM_UARTS; -+ serial_driver.type = TTY_DRIVER_TYPE_SERIAL; -+ serial_driver.subtype = SERIAL_TYPE_NORMAL; -+ serial_driver.init_termios = tty_std_termios; -+ serial_driver.init_termios.c_cflag = B115200 | CS8 | CREAD | CLOCAL; -+ serial_driver.flags = TTY_DRIVER_REAL_RAW; -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ serial_driver.refcount = serial_refcount; -+ serial_driver.ttys = serial_table; -+#else -+ serial_driver.refcount = &serial_refcount; -+ serial_driver.table = serial_table; -+#endif -+ -+ serial_driver.termios = serial_termios; -+ serial_driver.termios_locked = serial_termios_locked; -+ serial_driver.open = bcm63xx_cons_open; -+ serial_driver.close = bcm63xx_cons_close; -+ serial_driver.write = bcm63xx_cons_write; -+ serial_driver.flush_chars = bcm63xx_cons_flush_chars; -+ serial_driver.write_room = bcm63xx_cons_write_room; -+ serial_driver.chars_in_buffer = bcm_chars_in_buffer; -+ serial_driver.flush_buffer = bcm_flush_buffer; -+ serial_driver.ioctl = bcm_ioctl; -+ serial_driver.throttle = bcm_throttle; -+ serial_driver.unthrottle = bcm_unthrottle; -+ serial_driver.send_xchar = bcm_send_xchar; -+ serial_driver.set_termios = bcm_set_termios; -+ serial_driver.stop = bcm_stop; -+ serial_driver.start = bcm_start; -+ serial_driver.hangup = bcm_hangup; -+ -+ if (tty_register_driver (&serial_driver)) -+ panic("Couldn't register serial driver\n"); -+ -+ save_flags(flags); cli(); -+ for (i = 0; i < BCM_NUM_UARTS; i++) -+ { -+ info = &multi[i]; -+ lines[i] = info; -+ info->port = (Uart *) ((char *)UART_BASE + (i * 0x20)); -+ info->irq = (2 - i) + 8; -+ info->line = i; -+ info->tty = 0; -+ info->close_delay = 50; -+ info->closing_wait = 3000; -+ info->x_char = 0; -+ info->event = 0; -+ info->count = 0; -+ info->blocked_open = 0; -+ info->normal_termios = serial_driver.init_termios; -+ init_waitqueue_head(&info->open_wait); -+ init_waitqueue_head(&info->close_wait); -+ -+ /* If we are pointing to address zero then punt - not correctly -+ * set up in setup.c to handle this. -+ */ -+ if (! info->port) -+ return 0; -+ BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART); -+ } -+ -+ /* order matters here... the trick is that flags -+ * is updated... in request_irq - to immediatedly obliterate -+ * it is unwise. -+ */ -+ restore_flags(flags); -+ return 0; -+} -+ -+module_init(bcm63xx_serialinit); -+ -+/* -------------------------------------------------------------------------- -+ Name: bcm_console_print -+ Purpose: bcm_console_print is registered for printk. -+ The console_lock must be held when we get here. -+-------------------------------------------------------------------------- */ -+static void bcm_console_print (struct console * cons, const char * str, -+ unsigned int count) -+{ -+ unsigned int i; -+ //_puts(str); -+ for(i=0; iindex; -+ return &serial_driver; -+} -+ -+static int __init bcm_console_setup(struct console * co, char * options) -+{ -+ return 0; -+} -+ -+static struct console bcm_sercons = { -+ .name = "ttyS", -+ .write = bcm_console_print, -+ .device = bcm_console_device, -+ .setup = bcm_console_setup, -+ .flags = CON_PRINTBUFFER, // CON_CONSDEV, CONSOLE_LINE, -+ .index = -1, -+}; -+ -+static int __init bcm63xx_console_init(void) -+{ -+ register_console(&bcm_sercons); -+ return 0; -+} -+ -+console_initcall(bcm63xx_console_init); -diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/serial/impl1/Makefile linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/serial/impl1/Makefile ---- linux-2.6.8.1/bcmdrivers/opensource/char/serial/impl1/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/serial/impl1/Makefile 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,13 @@ -+# File: bcmdrivers/opensource/char/serial -+# -+# Makefile for the BCM63xx serial/console driver -+ -+obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o -+ -+EXTRA_CFLAGS += -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD) -+ -+-include $(TOPDIR)/Rules.make -+ -+clean: -+ rm -f core *.o *.a *.s -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c ---- linux-2.6.8.1/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,1035 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+/* Description: Serial port driver for the BCM963XX. */ -+ -+#define CARDNAME "bcm963xx_serial driver" -+#define VERSION "2.0" -+#define VER_STR CARDNAME " v" VERSION "\n" -+ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* for definition of struct console */ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+extern void _putc(char); -+extern void _puts(const char *); -+ -+typedef struct bcm_serial { -+ volatile Uart * port; -+ int type; -+ int flags; -+ int irq; -+ int baud_base; -+ int blocked_open; -+ unsigned short close_delay; -+ unsigned short closing_wait; -+ unsigned short line; /* port/line number */ -+ unsigned short cflags; /* line configuration flag */ -+ unsigned short x_char; /* xon/xoff character */ -+ unsigned short read_status_mask; /* mask for read condition */ -+ unsigned short ignore_status_mask; /* mask for ignore condition */ -+ unsigned long event; /* mask used in BH */ -+ int xmit_head; /* Position of the head */ -+ int xmit_tail; /* Position of the tail */ -+ int xmit_cnt; /* Count of the chars in the buffer */ -+ int count; /* indicates how many times it has been opened */ -+ int magic; -+ -+ struct async_icount icount; /* keep track of things ... */ -+ struct tty_struct *tty; /* tty associated */ -+ struct termios normal_termios; -+ -+ wait_queue_head_t open_wait; -+ wait_queue_head_t close_wait; -+ -+ long session; /* Session of opening process */ -+ long pgrp; /* pgrp of opening process */ -+ -+ unsigned char is_initialized; -+} Context; -+ -+ -+/*---------------------------------------------------------------------*/ -+/* Define bits in the Interrupt Enable register */ -+/*---------------------------------------------------------------------*/ -+/* Enable receive interrupt */ -+#define RXINT (RXFIFONE|RXOVFERR) -+ -+/* Enable transmit interrupt */ -+#define TXINT (TXFIFOEMT|TXUNDERR|TXOVFERR) -+ -+/* Enable receiver line status interrupt */ -+#define LSINT (RXBRK|RXPARERR|RXFRAMERR) -+ -+#define BCM_NUM_UARTS 1 -+ -+#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH) -+ -+ -+static struct bcm_serial multi[BCM_NUM_UARTS]; -+static struct bcm_serial *lines[BCM_NUM_UARTS]; -+static struct tty_driver serial_driver; -+static struct tty_struct *serial_table[BCM_NUM_UARTS]; -+static struct termios *serial_termios[BCM_NUM_UARTS]; -+static struct termios *serial_termios_locked[BCM_NUM_UARTS]; -+static int serial_refcount; -+ -+ -+static void bcm_stop (struct tty_struct *tty); -+static void bcm_start (struct tty_struct *tty); -+static inline void receive_chars (struct bcm_serial * info); -+static int startup (struct bcm_serial *info); -+static void shutdown (struct bcm_serial * info); -+static void change_speed( volatile Uart *pUart, tcflag_t cFlag ); -+static void bcm63xx_cons_flush_chars (struct tty_struct *tty); -+static int bcm63xx_cons_write (struct tty_struct *tty, int from_user, -+ const unsigned char *buf, int count); -+static int bcm63xx_cons_write_room (struct tty_struct *tty); -+static int bcm_chars_in_buffer (struct tty_struct *tty); -+static void bcm_flush_buffer (struct tty_struct *tty); -+static void bcm_throttle (struct tty_struct *tty); -+static void bcm_unthrottle (struct tty_struct *tty); -+static void bcm_send_xchar (struct tty_struct *tty, char ch); -+static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo); -+static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info); -+static int get_lsr_info (struct bcm_serial *info, unsigned int *value); -+static void send_break (struct bcm_serial *info, int duration); -+static int bcm_ioctl (struct tty_struct * tty, struct file * file, -+ unsigned int cmd, unsigned long arg); -+static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios); -+static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp); -+static void bcm_hangup (struct tty_struct *tty); -+static int block_til_ready (struct tty_struct *tty, struct file *filp, struct bcm_serial *info); -+static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp); -+static int __init bcm63xx_serialinit(void); -+ -+ -+/* -+ * ------------------------------------------------------------ -+ * rs_stop () and rs_start () -+ * -+ * These routines are called before setting or resetting -+ * tty->stopped. They enable or disable transmitter interrupts, -+ * as necessary. -+ * ------------------------------------------------------------ -+ */ -+static void bcm_stop (struct tty_struct *tty) -+{ -+} -+ -+static void bcm_start (struct tty_struct *tty) -+{ -+ _puts(CARDNAME " Start\n"); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * receive_char () -+ * -+ * This routine deals with inputs from any lines. -+ * ------------------------------------------------------------ -+ */ -+static inline void receive_chars (struct bcm_serial * info) -+{ -+ struct tty_struct *tty = 0; -+ struct async_icount * icount; -+ int ignore = 0; -+ unsigned short status, tmp; -+ UCHAR ch = 0; -+ while ((status = info->port->intStatus) & RXINT) -+ { -+ if (status & RXFIFONE) -+ ch = info->port->Data; // Read the character -+ tty = info->tty; /* now tty points to the proper dev */ -+ icount = &info->icount; -+ if (! tty) -+ break; -+ if (tty->flip.count >= TTY_FLIPBUF_SIZE) -+ break; -+ *tty->flip.char_buf_ptr = ch; -+ *tty->flip.flag_buf_ptr = 0; -+ icount->rx++; -+ if (status & RXBRK) -+ { -+ *tty->flip.flag_buf_ptr = TTY_BREAK; -+ icount->brk++; -+ } -+ // keep track of the statistics -+ if (status & (RXFRAMERR | RXPARERR | RXOVFERR)) -+ { -+ if (status & RXPARERR) /* parity error */ -+ icount->parity++; -+ else -+ if (status & RXFRAMERR) /* frame error */ -+ icount->frame++; -+ if (status & RXOVFERR) -+ { -+ // Overflow. Reset the RX FIFO -+ info->port->fifoctl |= RSTRXFIFOS; -+ icount->overrun++; -+ } -+ // check to see if we should ignore the character -+ // and mask off conditions that should be ignored -+ if (status & info->ignore_status_mask) -+ { -+ if (++ignore > 100 ) -+ break; -+ goto ignore_char; -+ } -+ // Mask off the error conditions we want to ignore -+ tmp = status & info->read_status_mask; -+ if (tmp & RXPARERR) -+ { -+ *tty->flip.flag_buf_ptr = TTY_PARITY; -+ } -+ else -+ if (tmp & RXFRAMERR) -+ { -+ *tty->flip.flag_buf_ptr = TTY_FRAME; -+ } -+ if (tmp & RXOVFERR) -+ { -+ if (tty->flip.count < TTY_FLIPBUF_SIZE) -+ { -+ tty->flip.count++; -+ tty->flip.flag_buf_ptr++; -+ tty->flip.char_buf_ptr++; -+ *tty->flip.flag_buf_ptr = TTY_OVERRUN; -+ } -+ } -+ } -+ tty->flip.flag_buf_ptr++; -+ tty->flip.char_buf_ptr++; -+ tty->flip.count++; -+ } -+ignore_char: -+ if (tty) -+ tty_flip_buffer_push(tty); -+} -+ -+ -+/* -+ * ------------------------------------------------------------ -+ * bcm_interrupt () -+ * -+ * this is the main interrupt routine for the chip. -+ * It deals with the multiple ports. -+ * ------------------------------------------------------------ -+ */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+static irqreturn_t bcm_interrupt (int irq, void * dev, struct pt_regs * regs) -+#else -+static void bcm_interrupt (int irq, void * dev, struct pt_regs * regs) -+#endif -+{ -+ struct bcm_serial * info = lines[0]; -+ UINT16 intStat; -+ -+ /* get pending interrupt flags from UART */ -+ -+ /* Mask with only the serial interrupts that are enabled */ -+ intStat = info->port->intStatus & info->port->intMask; -+ while (intStat) -+ { -+ if (intStat & RXINT) -+ receive_chars (info); -+ else -+ if (intStat & TXINT) -+ info->port->intStatus = TXINT; -+ else /* don't know what it was, so let's mask it */ -+ info->port->intMask &= ~intStat; -+ -+ intStat = info->port->intStatus & info->port->intMask; -+ } -+ -+ // Clear the interrupt -+ BcmHalInterruptEnable (INTERRUPT_ID_UART); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ return IRQ_HANDLED; -+#endif -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * startup () -+ * -+ * various initialization tasks -+ * ------------------------------------------------------------------- -+ */ -+static int startup (struct bcm_serial *info) -+{ -+ // Port is already started... -+ return 0; -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * shutdown () -+ * -+ * This routine will shutdown a serial port; interrupts are disabled, and -+ * DTR is dropped if the hangup on close termio flag is on. -+ * ------------------------------------------------------------------- -+ */ -+static void shutdown (struct bcm_serial * info) -+{ -+ unsigned long flags; -+ if (!info->is_initialized) -+ return; -+ -+ save_flags (flags); -+ cli (); -+ -+ info->port->control &= ~(BRGEN|TXEN|RXEN); -+ if (info->tty) -+ set_bit (TTY_IO_ERROR, &info->tty->flags); -+ info->is_initialized = 0; -+ -+ restore_flags (flags); -+} -+/* -+ * ------------------------------------------------------------------- -+ * change_speed () -+ * -+ * Set the baud rate, character size, parity and stop bits. -+ * ------------------------------------------------------------------- -+ */ -+static void change_speed( volatile Uart *pUart, tcflag_t cFlag ) -+{ -+ unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp; -+ save_flags(ulFlags); -+ cli(); -+ switch( cFlag & (CBAUD | CBAUDEX) ) -+ { -+ case B115200: -+ ulBaud = 115200; -+ break; -+ case B57600: -+ ulBaud = 57600; -+ break; -+ case B38400: -+ ulBaud = 38400; -+ break; -+ case B19200: -+ ulBaud = 19200; -+ break; -+ case B9600: -+ ulBaud = 9600; -+ break; -+ case B4800: -+ ulBaud = 4800; -+ break; -+ case B2400: -+ ulBaud = 2400; -+ break; -+ case B1800: -+ ulBaud = 1800; -+ break; -+ case B1200: -+ ulBaud = 1200; -+ break; -+ case B600: -+ ulBaud = 600; -+ break; -+ case B300: -+ ulBaud = 300; -+ break; -+ case B200: -+ ulBaud = 200; -+ break; -+ case B150: -+ ulBaud = 150; -+ break; -+ case B134: -+ ulBaud = 134; -+ break; -+ case B110: -+ ulBaud = 110; -+ break; -+ case B75: -+ ulBaud = 75; -+ break; -+ case B50: -+ ulBaud = 50; -+ break; -+ default: -+ ulBaud = 115200; -+ break; -+ } -+ -+ /* Calculate buad rate. */ -+ ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT; -+ ulTmp = (ulClockFreqHz / ulBaud) / 16; -+ if( ulTmp & 0x01 ) -+ ulTmp /= 2; /* Rounding up, so sub is already accounted for */ -+ else -+ ulTmp = (ulTmp / 2) - 1; /* Rounding down so we must sub 1 */ -+ pUart->baudword = ulTmp; -+ -+ /* Set character size, stop bits and parity. */ -+ switch( cFlag & CSIZE ) -+ { -+ case CS5: -+ ulTmp = BITS5SYM; /* select transmit 5 bit data size */ -+ break; -+ case CS6: -+ ulTmp = BITS6SYM; /* select transmit 6 bit data size */ -+ break; -+ case CS7: -+ ulTmp = BITS7SYM; /* select transmit 7 bit data size */ -+ break; -+ /*case CS8:*/ -+ default: -+ ulTmp = BITS8SYM; /* select transmit 8 bit data size */ -+ break; -+ } -+ if( cFlag & CSTOPB ) -+ ulTmp |= TWOSTOP; /* select 2 stop bits */ -+ else -+ ulTmp |= ONESTOP; /* select one stop bit */ -+ -+ /* Write these values into the config reg. */ -+ pUart->config = ulTmp; -+ pUart->control &= ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN); -+ switch( cFlag & (PARENB | PARODD) ) -+ { -+ case PARENB|PARODD: -+ pUart->control |= RXPARITYEN | TXPARITYEN; -+ break; -+ case PARENB: -+ pUart->control |= RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN; -+ break; -+ default: -+ pUart->control |= 0; -+ break; -+ } -+ -+ /* Reset and flush uart */ -+ pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS; -+ restore_flags( ulFlags ); -+} -+ -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm_flush_char () -+ * -+ * Nothing to flush. Polled I/O is used. -+ * ------------------------------------------------------------------- -+ */ -+static void bcm63xx_cons_flush_chars (struct tty_struct *tty) -+{ -+} -+ -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm63xx_cons_write () -+ * -+ * Main output routine using polled I/O. -+ * ------------------------------------------------------------------- -+ */ -+static int bcm63xx_cons_write (struct tty_struct *tty, int from_user, -+ const unsigned char *buf, int count) -+{ -+ int c; -+ -+ for (c = 0; c < count; c++) -+ _putc(buf[c]); -+ return count; -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm63xx_cons_write_room () -+ * -+ * Compute the amount of space available for writing. -+ * ------------------------------------------------------------------- -+ */ -+static int bcm63xx_cons_write_room (struct tty_struct *tty) -+{ -+ /* Pick a number. Any number. Polled I/O is used. */ -+ return 1024; -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm_chars_in_buffer () -+ * -+ * compute the amount of char left to be transmitted -+ * ------------------------------------------------------------------- -+ */ -+static int bcm_chars_in_buffer (struct tty_struct *tty) -+{ -+ return 0; -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm_flush_buffer () -+ * -+ * Empty the output buffer -+ * ------------------------------------------------------------------- -+ */ -+static void bcm_flush_buffer (struct tty_struct *tty) -+{ -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * bcm_throttle () and bcm_unthrottle () -+ * -+ * This routine is called by the upper-layer tty layer to signal that -+ * incoming characters should be throttled (or not). -+ * ------------------------------------------------------------ -+ */ -+static void bcm_throttle (struct tty_struct *tty) -+{ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ if (I_IXOFF(tty)) -+ info->x_char = STOP_CHAR(tty); -+} -+ -+static void bcm_unthrottle (struct tty_struct *tty) -+{ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ if (I_IXOFF(tty)) -+ { -+ if (info->x_char) -+ info->x_char = 0; -+ else -+ info->x_char = START_CHAR(tty); -+ } -+} -+ -+static void bcm_send_xchar (struct tty_struct *tty, char ch) -+{ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ info->x_char = ch; -+ if (ch) -+ bcm_start (info->tty); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * rs_ioctl () and friends -+ * ------------------------------------------------------------ -+ */ -+static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo) -+{ -+ struct serial_struct tmp; -+ -+ if (!retinfo) -+ return -EFAULT; -+ -+ memset (&tmp, 0, sizeof(tmp)); -+ tmp.type = info->type; -+ tmp.line = info->line; -+ tmp.port = (int) info->port; -+ tmp.irq = info->irq; -+ tmp.flags = 0; -+ tmp.baud_base = info->baud_base; -+ tmp.close_delay = info->close_delay; -+ tmp.closing_wait = info->closing_wait; -+ -+ return copy_to_user (retinfo, &tmp, sizeof(*retinfo)); -+} -+ -+static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info) -+{ -+ struct serial_struct new_serial; -+ struct bcm_serial old_info; -+ int retval = 0; -+ -+ if (!new_info) -+ return -EFAULT; -+ -+ copy_from_user (&new_serial, new_info, sizeof(new_serial)); -+ old_info = *info; -+ -+ if (!capable(CAP_SYS_ADMIN)) -+ return -EPERM; -+ -+ -+ if (info->count > 1) -+ return -EBUSY; -+ -+ /* OK, past this point, all the error checking has been done. -+ * At this point, we start making changes..... -+ */ -+ info->baud_base = new_serial.baud_base; -+ info->type = new_serial.type; -+ info->close_delay = new_serial.close_delay; -+ info->closing_wait = new_serial.closing_wait; -+ retval = startup (info); -+ return retval; -+} -+ -+/* -+ * get_lsr_info - get line status register info -+ * -+ * Purpose: Let user call ioctl() to get info when the UART physically -+ * is emptied. On bus types like RS485, the transmitter must -+ * release the bus after transmitting. This must be done when -+ * the transmit shift register is empty, not be done when the -+ * transmit holding register is empty. This functionality -+ * allows an RS485 driver to be written in user space. -+ */ -+static int get_lsr_info (struct bcm_serial *info, unsigned int *value) -+{ -+ return( 0 ); -+} -+ -+/* -+ * This routine sends a break character out the serial port. -+ */ -+static void send_break (struct bcm_serial *info, int duration) -+{ -+ unsigned long flags; -+ -+ if (!info->port) -+ return; -+ -+ current->state = TASK_INTERRUPTIBLE; -+ -+ save_flags (flags); -+ cli(); -+ -+ info->port->control |= XMITBREAK; -+ schedule_timeout(duration); -+ info->port->control &= ~XMITBREAK; -+ -+ restore_flags (flags); -+} -+ -+static int bcm_ioctl (struct tty_struct * tty, struct file * file, -+ unsigned int cmd, unsigned long arg) -+{ -+ int error; -+ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data; -+ int retval; -+ -+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && -+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && -+ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) -+ { -+ if (tty->flags & (1 << TTY_IO_ERROR)) -+ return -EIO; -+ } -+ switch (cmd) -+ { -+ -+ case TCSBRK: /* SVID version: non-zero arg --> no break */ -+ retval = tty_check_change (tty); -+ if (retval) -+ return retval; -+ tty_wait_until_sent (tty, 0); -+ if (!arg) -+ send_break (info, HZ/4); /* 1/4 second */ -+ return 0; -+ -+ case TCSBRKP: /* support for POSIX tcsendbreak() */ -+ retval = tty_check_change (tty); -+ if (retval) -+ return retval; -+ tty_wait_until_sent (tty, 0); -+ send_break (info, arg ? arg*(HZ/10) : HZ/4); -+ return 0; -+ -+ case TIOCGSOFTCAR: -+ error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(long)); -+ if (error) -+ return error; -+ put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg); -+ return 0; -+ -+ case TIOCSSOFTCAR: -+ error = get_user (arg, (unsigned long *)arg); -+ if (error) -+ return error; -+ tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); -+ return 0; -+ -+ case TIOCGSERIAL: -+ error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct)); -+ if (error) -+ return error; -+ return get_serial_info (info, (struct serial_struct *)arg); -+ -+ case TIOCSSERIAL: -+ return set_serial_info (info, (struct serial_struct *) arg); -+ -+ case TIOCSERGETLSR: /* Get line status register */ -+ error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(unsigned int)); -+ if (error) -+ return error; -+ else -+ return get_lsr_info (info, (unsigned int *)arg); -+ -+ case TIOCSERGSTRUCT: -+ error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(struct bcm_serial)); -+ if (error) -+ return error; -+ copy_to_user((struct bcm_serial *)arg, info, sizeof(struct bcm_serial)); -+ return 0; -+ -+ default: -+ return -ENOIOCTLCMD; -+ } -+ return 0; -+} -+ -+static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios) -+{ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ -+ if( tty->termios->c_cflag != old_termios->c_cflag ) -+ change_speed (info->port, tty->termios->c_cflag); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * bcm63xx_cons_close() -+ * -+ * This routine is called when the serial port gets closed. First, we -+ * wait for the last remaining data to be sent. Then, we turn off -+ * the transmit enable and receive enable flags. -+ * ------------------------------------------------------------ -+ */ -+static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp) -+{ -+ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data; -+ unsigned long flags; -+ -+ if (!info) -+ return; -+ -+ save_flags (flags); -+ cli(); -+ -+ if (tty_hung_up_p (filp)) -+ { -+ restore_flags (flags); -+ return; -+ } -+ -+ if ((tty->count == 1) && (info->count != 1)) -+ { -+ -+ /* Uh, oh. tty->count is 1, which means that the tty -+ * structure will be freed. Info->count should always -+ * be one in these conditions. If it's greater than -+ * one, we've got real problems, since it means the -+ * serial port won't be shutdown. -+ */ -+ printk("bcm63xx_cons_close: bad serial port count; tty->count is 1, " -+ "info->count is %d\n", info->count); -+ info->count = 1; -+ } -+ -+ if (--info->count < 0) -+ { -+ printk("ds_close: bad serial port count for ttys%d: %d\n", -+ info->line, info->count); -+ info->count = 0; -+ } -+ -+ if (info->count) -+ { -+ restore_flags (flags); -+ return; -+ } -+ -+ /* Now we wait for the transmit buffer to clear; and we notify -+ * the line discipline to only process XON/XOFF characters. -+ */ -+ tty->closing = 1; -+ -+ /* At this point we stop accepting input. To do this, we -+ * disable the receive line status interrupts. -+ */ -+ shutdown (info); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ if (tty->driver->flush_buffer) -+ tty->driver->flush_buffer (tty); -+#else -+ if (tty->driver.flush_buffer) -+ tty->driver.flush_buffer (tty); -+#endif -+ if (tty->ldisc.flush_buffer) -+ tty->ldisc.flush_buffer (tty); -+ -+ tty->closing = 0; -+ info->event = 0; -+ info->tty = 0; -+ if (tty->ldisc.num != ldiscs[N_TTY].num) -+ { -+ if (tty->ldisc.close) -+ (tty->ldisc.close)(tty); -+ tty->ldisc = ldiscs[N_TTY]; -+ tty->termios->c_line = N_TTY; -+ if (tty->ldisc.open) -+ (tty->ldisc.open)(tty); -+ } -+ if (info->blocked_open) -+ { -+ if (info->close_delay) -+ { -+ current->state = TASK_INTERRUPTIBLE; -+ schedule_timeout(info->close_delay); -+ } -+ wake_up_interruptible (&info->open_wait); -+ } -+ wake_up_interruptible (&info->close_wait); -+ -+ restore_flags (flags); -+} -+ -+/* -+ * bcm_hangup () --- called by tty_hangup() when a hangup is signaled. -+ */ -+static void bcm_hangup (struct tty_struct *tty) -+{ -+ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ -+ shutdown (info); -+ info->event = 0; -+ info->count = 0; -+ info->tty = 0; -+ wake_up_interruptible (&info->open_wait); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * rs_open() and friends -+ * ------------------------------------------------------------ -+ */ -+static int block_til_ready (struct tty_struct *tty, struct file *filp, -+ struct bcm_serial *info) -+{ -+ return 0; -+} -+ -+/* -+ * This routine is called whenever a serial port is opened. It -+ * enables interrupts for a serial port. It also performs the -+ * serial-specific initialization for the tty structure. -+ */ -+static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp) -+{ -+ struct bcm_serial *info; -+ int retval, line; -+ -+ // Make sure we're only opening on of the ports we support -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start; -+#else -+ line = MINOR(tty->device) - tty->driver.minor_start; -+#endif -+ -+ if ((line < 0) || (line >= BCM_NUM_UARTS)) -+ return -ENODEV; -+ -+ info = lines[line]; -+ -+ info->port->intMask = 0; /* Clear any pending interrupts */ -+ info->port->intMask = RXINT; /* Enable RX */ -+ -+ info->count++; -+ tty->driver_data = info; -+ info->tty = tty; -+ BcmHalInterruptEnable (INTERRUPT_ID_UART); -+ -+ // Start up serial port -+ retval = startup (info); -+ if (retval) -+ return retval; -+ -+ retval = block_til_ready (tty, filp, info); -+ if (retval) -+ return retval; -+ -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ info->pgrp = process_group(current); -+ info->session = current->signal->session; -+#else -+ info->session = current->session; -+ info->pgrp = current->pgrp; -+#endif -+ -+ return 0; -+} -+ -+/* -------------------------------------------------------------------------- -+ Name: bcm63xx_serialinit -+ Purpose: Initialize our BCM63xx serial driver -+-------------------------------------------------------------------------- */ -+static int __init bcm63xx_serialinit(void) -+{ -+ int i, flags; -+ struct bcm_serial * info; -+ -+ // Print the driver version information -+ printk(VER_STR); -+ -+ memset(&serial_driver, 0, sizeof(struct tty_driver)); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ serial_driver.owner = THIS_MODULE; -+ serial_driver.devfs_name = "tts/"; -+#endif -+ serial_driver.magic = TTY_DRIVER_MAGIC; -+ serial_driver.name = "ttyS"; -+ serial_driver.major = TTY_MAJOR; -+ serial_driver.minor_start = 64; -+ serial_driver.num = BCM_NUM_UARTS; -+ serial_driver.type = TTY_DRIVER_TYPE_SERIAL; -+ serial_driver.subtype = SERIAL_TYPE_NORMAL; -+ serial_driver.init_termios = tty_std_termios; -+ serial_driver.init_termios.c_cflag = B115200 | CS8 | CREAD | CLOCAL; -+ serial_driver.flags = TTY_DRIVER_REAL_RAW; -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ serial_driver.refcount = serial_refcount; -+ serial_driver.ttys = serial_table; -+#else -+ serial_driver.refcount = &serial_refcount; -+ serial_driver.table = serial_table; -+#endif -+ -+ serial_driver.termios = serial_termios; -+ serial_driver.termios_locked = serial_termios_locked; -+ serial_driver.open = bcm63xx_cons_open; -+ serial_driver.close = bcm63xx_cons_close; -+ serial_driver.write = bcm63xx_cons_write; -+ serial_driver.flush_chars = bcm63xx_cons_flush_chars; -+ serial_driver.write_room = bcm63xx_cons_write_room; -+ serial_driver.chars_in_buffer = bcm_chars_in_buffer; -+ serial_driver.flush_buffer = bcm_flush_buffer; -+ serial_driver.ioctl = bcm_ioctl; -+ serial_driver.throttle = bcm_throttle; -+ serial_driver.unthrottle = bcm_unthrottle; -+ serial_driver.send_xchar = bcm_send_xchar; -+ serial_driver.set_termios = bcm_set_termios; -+ serial_driver.stop = bcm_stop; -+ serial_driver.start = bcm_start; -+ serial_driver.hangup = bcm_hangup; -+ -+ if (tty_register_driver (&serial_driver)) -+ panic("Couldn't register serial driver\n"); -+ -+ save_flags(flags); cli(); -+ for (i = 0; i < BCM_NUM_UARTS; i++) -+ { -+ info = &multi[i]; -+ lines[i] = info; -+ info->port = (Uart *) ((char *)UART_BASE + (i * 0x20)); -+ info->irq = (2 - i) + 8; -+ info->line = i; -+ info->tty = 0; -+ info->close_delay = 50; -+ info->closing_wait = 3000; -+ info->x_char = 0; -+ info->event = 0; -+ info->count = 0; -+ info->blocked_open = 0; -+ info->normal_termios = serial_driver.init_termios; -+ init_waitqueue_head(&info->open_wait); -+ init_waitqueue_head(&info->close_wait); -+ -+ /* If we are pointing to address zero then punt - not correctly -+ * set up in setup.c to handle this. -+ */ -+ if (! info->port) -+ return 0; -+ BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART); -+ } -+ -+ /* order matters here... the trick is that flags -+ * is updated... in request_irq - to immediatedly obliterate -+ * it is unwise. -+ */ -+ restore_flags(flags); -+ return 0; -+} -+ -+module_init(bcm63xx_serialinit); -+ -+/* -------------------------------------------------------------------------- -+ Name: bcm_console_print -+ Purpose: bcm_console_print is registered for printk. -+ The console_lock must be held when we get here. -+-------------------------------------------------------------------------- */ -+static void bcm_console_print (struct console * cons, const char * str, -+ unsigned int count) -+{ -+ unsigned int i; -+ //_puts(str); -+ for(i=0; iindex; -+ return &serial_driver; -+} -+ -+static int __init bcm_console_setup(struct console * co, char * options) -+{ -+ return 0; -+} -+ -+static struct console bcm_sercons = { -+ .name = "ttyS", -+ .write = bcm_console_print, -+ .device = bcm_console_device, -+ .setup = bcm_console_setup, -+ .flags = CON_PRINTBUFFER, // CON_CONSDEV, CONSOLE_LINE, -+ .index = -1, -+}; -+ -+static int __init bcm63xx_console_init(void) -+{ -+ register_console(&bcm_sercons); -+ return 0; -+} -+ -+console_initcall(bcm63xx_console_init); -diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6338_intr.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_intr.h ---- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6338_intr.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_intr.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,72 @@ -+/* -+<:copyright-gpl -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __6338_INTR_H -+#define __6338_INTR_H -+ -+#ifdef __cplusplus -+ extern "C" { -+#endif -+ -+/*=====================================================================*/ -+/* BCM6338 External Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define INTERRUPT_ID_EXTERNAL_0 3 -+#define INTERRUPT_ID_EXTERNAL_1 4 -+#define INTERRUPT_ID_EXTERNAL_2 5 -+#define INTERRUPT_ID_EXTERNAL_3 6 -+ -+/*=====================================================================*/ -+/* BCM6338 Timer Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define MIPS_TIMER_INT 7 -+ -+/*=====================================================================*/ -+/* Peripheral ISR Table Offset */ -+/*=====================================================================*/ -+#define INTERNAL_ISR_TABLE_OFFSET 8 -+ -+/*=====================================================================*/ -+/* Logical Peripheral Interrupt IDs */ -+/*=====================================================================*/ -+ -+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) -+#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) -+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) -+#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4) -+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5) -+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6) -+#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7) -+#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) -+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) -+#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10) -+#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11) -+#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12) -+#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13) -+#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) -+#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) -+#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) -+#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17) -+ -+#ifdef __cplusplus -+ } -+#endif -+ -+#endif /* __BCM6338_H */ -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h ---- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,341 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __BCM6338_MAP_H -+#define __BCM6338_MAP_H -+ -+#if __cplusplus -+extern "C" { -+#endif -+ -+#include "bcmtypes.h" -+ -+#define PERF_BASE 0xfffe0000 -+#define TIMR_BASE 0xfffe0200 -+#define UART_BASE 0xfffe0300 -+#define GPIO_BASE 0xfffe0400 -+#define SPI_BASE 0xfffe0c00 -+ -+typedef struct PerfControl { -+ uint32 RevID; -+ uint16 testControl; -+ uint16 blkEnables; -+#define EMAC_CLK_EN 0x0010 -+#define USBS_CLK_EN 0x0010 -+#define SAR_CLK_EN 0x0020 -+ -+#define SPI_CLK_EN 0x0200 -+ -+ uint32 pll_control; -+#define SOFT_RESET 0x00000001 -+ -+ uint32 IrqMask; -+ uint32 IrqStatus; -+ -+ uint32 ExtIrqCfg; -+#define EI_SENSE_SHFT 0 -+#define EI_STATUS_SHFT 5 -+#define EI_CLEAR_SHFT 10 -+#define EI_MASK_SHFT 15 -+#define EI_INSENS_SHFT 20 -+#define EI_LEVEL_SHFT 25 -+ -+ uint32 unused[4]; /* (18) */ -+ uint32 BlockSoftReset; /* (28) */ -+#define BSR_SPI 0x00000001 -+#define BSR_EMAC 0x00000004 -+#define BSR_USBH 0x00000008 -+#define BSR_USBS 0x00000010 -+#define BSR_ADSL 0x00000020 -+#define BSR_DMAMEM 0x00000040 -+#define BSR_SAR 0x00000080 -+#define BSR_ACLC 0x00000100 -+#define BSR_ADSL_MIPS_PLL 0x00000400 -+#define BSR_ALL_BLOCKS \ -+ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ -+ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) -+} PerfControl; -+ -+#define PERF ((volatile PerfControl * const) PERF_BASE) -+ -+ -+typedef struct Timer { -+ uint16 unused0; -+ byte TimerMask; -+#define TIMER0EN 0x01 -+#define TIMER1EN 0x02 -+#define TIMER2EN 0x04 -+ byte TimerInts; -+#define TIMER0 0x01 -+#define TIMER1 0x02 -+#define TIMER2 0x04 -+#define WATCHDOG 0x08 -+ uint32 TimerCtl0; -+ uint32 TimerCtl1; -+ uint32 TimerCtl2; -+#define TIMERENABLE 0x80000000 -+#define RSTCNTCLR 0x40000000 -+ uint32 TimerCnt0; -+ uint32 TimerCnt1; -+ uint32 TimerCnt2; -+ uint32 WatchDogDefCount; -+ -+ /* Write 0xff00 0x00ff to Start timer -+ * Write 0xee00 0x00ee to Stop and re-load default count -+ * Read from this register returns current watch dog count -+ */ -+ uint32 WatchDogCtl; -+ -+ /* Number of 40-MHz ticks for WD Reset pulse to last */ -+ uint32 WDResetCount; -+} Timer; -+ -+#define TIMER ((volatile Timer * const) TIMR_BASE) -+typedef struct UartChannel { -+ byte unused0; -+ byte control; -+#define BRGEN 0x80 /* Control register bit defs */ -+#define TXEN 0x40 -+#define RXEN 0x20 -+#define LOOPBK 0x10 -+#define TXPARITYEN 0x08 -+#define TXPARITYEVEN 0x04 -+#define RXPARITYEN 0x02 -+#define RXPARITYEVEN 0x01 -+ -+ byte config; -+#define XMITBREAK 0x40 -+#define BITS5SYM 0x00 -+#define BITS6SYM 0x10 -+#define BITS7SYM 0x20 -+#define BITS8SYM 0x30 -+#define ONESTOP 0x07 -+#define TWOSTOP 0x0f -+ /* 4-LSBS represent STOP bits/char -+ * in 1/8 bit-time intervals. Zero -+ * represents 1/8 stop bit interval. -+ * Fifteen represents 2 stop bits. -+ */ -+ byte fifoctl; -+#define RSTTXFIFOS 0x80 -+#define RSTRXFIFOS 0x40 -+ /* 5-bit TimeoutCnt is in low bits of this register. -+ * This count represents the number of characters -+ * idle times before setting receive Irq when below threshold -+ */ -+ uint32 baudword; -+ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate -+ */ -+ -+ byte txf_levl; /* Read-only fifo depth */ -+ byte rxf_levl; /* Read-only fifo depth */ -+ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are -+ * RxThreshold. Irq can be asserted -+ * when rx fifo> thresh, txfifo -+*/ -+ -+#ifndef __6345_INTR_H -+#define __6345_INTR_H -+ -+#ifdef __cplusplus -+ extern "C" { -+#endif -+ -+/*=====================================================================*/ -+/* BCM6345 External Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define INTERRUPT_ID_EXTERNAL_0 3 -+#define INTERRUPT_ID_EXTERNAL_1 4 -+#define INTERRUPT_ID_EXTERNAL_2 5 -+#define INTERRUPT_ID_EXTERNAL_3 6 -+ -+/*=====================================================================*/ -+/* BCM6345 Timer Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define MIPS_TIMER_INT 7 -+ -+/*=====================================================================*/ -+/* Peripheral ISR Table Offset */ -+/*=====================================================================*/ -+#define INTERNAL_ISR_TABLE_OFFSET 8 -+#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13) -+ -+/*=====================================================================*/ -+/* Logical Peripheral Interrupt IDs */ -+/*=====================================================================*/ -+ -+/* Internal peripheral interrupt IDs */ -+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) -+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) -+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3) -+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4) -+#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5) -+#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8) -+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12) -+ -+/* DMA channel interrupt IDs */ -+#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN) -+#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN) -+#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN) -+#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN) -+#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN) -+#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN) -+#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN) -+#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN) -+#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN) -+#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN) -+#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN) -+#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN) -+ -+#ifdef __cplusplus -+ } -+#endif -+ -+#endif /* __BCM6345_H */ -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h ---- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,169 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __BCM6345_MAP_H -+#define __BCM6345_MAP_H -+ -+#if __cplusplus -+extern "C" { -+#endif -+ -+#include "bcmtypes.h" -+#include "6345_intr.h" -+ -+typedef struct IntControl { -+ uint32 RevID; -+ uint16 testControl; -+ uint16 blkEnables; -+#define USB_CLK_EN 0x0100 -+#define EMAC_CLK_EN 0x0080 -+#define UART_CLK_EN 0x0008 -+#define CPU_CLK_EN 0x0001 -+ -+ uint32 pll_control; -+#define SOFT_RESET 0x00000001 -+ -+ uint32 IrqMask; -+ uint32 IrqStatus; -+ -+ uint32 ExtIrqCfg; -+#define EI_SENSE_SHFT 0 -+#define EI_STATUS_SHFT 4 -+#define EI_CLEAR_SHFT 8 -+#define EI_MASK_SHFT 12 -+#define EI_INSENS_SHFT 16 -+#define EI_LEVEL_SHFT 20 -+} IntControl; -+ -+#define INTC_BASE 0xfffe0000 -+#define PERF ((volatile IntControl * const) INTC_BASE) -+ -+#define TIMR_BASE 0xfffe0200 -+typedef struct Timer { -+ uint16 unused0; -+ byte TimerMask; -+#define TIMER0EN 0x01 -+#define TIMER1EN 0x02 -+#define TIMER2EN 0x04 -+ byte TimerInts; -+#define TIMER0 0x01 -+#define TIMER1 0x02 -+#define TIMER2 0x04 -+#define WATCHDOG 0x08 -+ uint32 TimerCtl0; -+ uint32 TimerCtl1; -+ uint32 TimerCtl2; -+#define TIMERENABLE 0x80000000 -+#define RSTCNTCLR 0x40000000 -+ uint32 TimerCnt0; -+ uint32 TimerCnt1; -+ uint32 TimerCnt2; -+ uint32 WatchDogDefCount; -+ -+ /* Write 0xff00 0x00ff to Start timer -+ * Write 0xee00 0x00ee to Stop and re-load default count -+ * Read from this register returns current watch dog count -+ */ -+ uint32 WatchDogCtl; -+ -+ /* Number of 40-MHz ticks for WD Reset pulse to last */ -+ uint32 WDResetCount; -+} Timer; -+ -+#define TIMER ((volatile Timer * const) TIMR_BASE) -+ -+typedef struct UartChannel { -+ byte unused0; -+ byte control; -+#define BRGEN 0x80 /* Control register bit defs */ -+#define TXEN 0x40 -+#define RXEN 0x20 -+#define TXPARITYEN 0x08 -+#define TXPARITYEVEN 0x04 -+#define RXPARITYEN 0x02 -+#define RXPARITYEVEN 0x01 -+ byte config; -+#define BITS5SYM 0x00 -+#define BITS6SYM 0x10 -+#define BITS7SYM 0x20 -+#define BITS8SYM 0x30 -+#define XMITBREAK 0x40 -+#define ONESTOP 0x07 -+#define TWOSTOP 0x0f -+ -+ byte fifoctl; -+#define RSTTXFIFOS 0x80 -+#define RSTRXFIFOS 0x40 -+ uint32 baudword; -+ -+ byte txf_levl; -+ byte rxf_levl; -+ byte fifocfg; -+ byte prog_out; -+ -+ byte unused1; -+ byte DeltaIPEdgeNoSense; -+ byte DeltaIPConfig_Mask; -+ byte DeltaIP_SyncIP; -+ uint16 intMask; -+ uint16 intStatus; -+#define TXUNDERR 0x0002 -+#define TXOVFERR 0x0004 -+#define TXFIFOEMT 0x0020 -+#define RXOVFERR 0x0080 -+#define RXFIFONE 0x0800 -+#define RXFRAMERR 0x1000 -+#define RXPARERR 0x2000 -+#define RXBRK 0x4000 -+ -+ uint16 unused2; -+ uint16 Data; -+ uint32 unused3; -+ uint32 unused4; -+} Uart; -+ -+#define UART_BASE 0xfffe0300 -+#define UART ((volatile Uart * const) UART_BASE) -+ -+typedef struct GpioControl { -+ uint16 unused0; -+ byte unused1; -+ byte TBusSel; -+ -+ uint16 unused2; -+ uint16 GPIODir; -+ byte unused3; -+ byte Leds; -+ uint16 GPIOio; -+ -+ uint32 UartCtl; -+} GpioControl; -+ -+#define GPIO_BASE 0xfffe0400 -+#define GPIO ((volatile GpioControl * const) GPIO_BASE) -+ -+#define GPIO_NUM_MAX_BITS_MASK 0x0f -+#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) -+ -+#if __cplusplus -+} -+#endif -+ -+#endif -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6348_intr.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_intr.h ---- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6348_intr.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_intr.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,80 @@ -+/* -+<:copyright-gpl -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __6348_INTR_H -+#define __6348_INTR_H -+ -+#ifdef __cplusplus -+ extern "C" { -+#endif -+ -+/*=====================================================================*/ -+/* BCM6348 External Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define INTERRUPT_ID_EXTERNAL_0 3 -+#define INTERRUPT_ID_EXTERNAL_1 4 -+#define INTERRUPT_ID_EXTERNAL_2 5 -+#define INTERRUPT_ID_EXTERNAL_3 6 -+ -+/*=====================================================================*/ -+/* BCM6348 Timer Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define MIPS_TIMER_INT 7 -+ -+/*=====================================================================*/ -+/* Peripheral ISR Table Offset */ -+/*=====================================================================*/ -+#define INTERNAL_ISR_TABLE_OFFSET 8 -+ -+/*=====================================================================*/ -+/* Logical Peripheral Interrupt IDs */ -+/*=====================================================================*/ -+ -+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) -+#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) -+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) -+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4) -+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5) -+#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6) -+#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7) -+#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) -+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) -+#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10) -+#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11) -+#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12) -+#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13) -+#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) -+#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) -+#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) -+#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17) -+#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18) -+#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19) -+#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20) -+#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21) -+#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22) -+#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23) -+#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24) -+#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25) -+ -+#ifdef __cplusplus -+ } -+#endif -+ -+#endif /* __BCM6348_H */ -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h ---- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,508 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __BCM6348_MAP_H -+#define __BCM6348_MAP_H -+ -+#if __cplusplus -+extern "C" { -+#endif -+ -+#include "bcmtypes.h" -+ -+#define PERF_BASE 0xfffe0000 -+#define TIMR_BASE 0xfffe0200 -+#define UART_BASE 0xfffe0300 -+#define GPIO_BASE 0xfffe0400 -+#define MPI_BASE 0xfffe2000 /* MPI control registers */ -+#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */ -+#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */ -+ -+typedef struct PerfControl { -+ uint32 RevID; -+ uint16 testControl; -+ uint16 blkEnables; -+#define EMAC_CLK_EN 0x0010 -+#define SAR_CLK_EN 0x0020 -+#define USBS_CLK_EN 0x0040 -+#define USBH_CLK_EN 0x0100 -+ -+ uint32 pll_control; -+#define SOFT_RESET 0x00000001 -+ -+ uint32 IrqMask; -+ uint32 IrqStatus; -+ -+ uint32 ExtIrqCfg; -+#define EI_SENSE_SHFT 0 -+#define EI_STATUS_SHFT 5 -+#define EI_CLEAR_SHFT 10 -+#define EI_MASK_SHFT 15 -+#define EI_INSENS_SHFT 20 -+#define EI_LEVEL_SHFT 25 -+ -+ uint32 unused[4]; /* (18) */ -+ uint32 BlockSoftReset; /* (28) */ -+#define BSR_SPI 0x00000001 -+#define BSR_EMAC 0x00000004 -+#define BSR_USBH 0x00000008 -+#define BSR_USBS 0x00000010 -+#define BSR_ADSL 0x00000020 -+#define BSR_DMAMEM 0x00000040 -+#define BSR_SAR 0x00000080 -+#define BSR_ACLC 0x00000100 -+#define BSR_ADSL_MIPS_PLL 0x00000400 -+#define BSR_ALL_BLOCKS \ -+ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ -+ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) -+ uint32 unused2[2]; /* (2c) */ -+ uint32 PllStrap; /* (34) */ -+#define PLL_N1_SHFT 20 -+#define PLL_N1_MASK (7< thresh, txfifo= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) ) -+ -+ -+/* -+** External Bus Interface -+*/ -+typedef struct EbiChipSelect { -+ uint32 base; /* base address in upper 24 bits */ -+#define EBI_SIZE_8K 0 -+#define EBI_SIZE_16K 1 -+#define EBI_SIZE_32K 2 -+#define EBI_SIZE_64K 3 -+#define EBI_SIZE_128K 4 -+#define EBI_SIZE_256K 5 -+#define EBI_SIZE_512K 6 -+#define EBI_SIZE_1M 7 -+#define EBI_SIZE_2M 8 -+#define EBI_SIZE_4M 9 -+#define EBI_SIZE_8M 10 -+#define EBI_SIZE_16M 11 -+#define EBI_SIZE_32M 12 -+#define EBI_SIZE_64M 13 -+#define EBI_SIZE_128M 14 -+#define EBI_SIZE_256M 15 -+ uint32 config; -+#define EBI_ENABLE 0x00000001 /* .. enable this range */ -+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ -+#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ -+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ -+#define EBI_WREN 0x00000020 /* enable posted writes */ -+#define EBI_POLARITY 0x00000040 /* .. set to invert something, -+ ** don't know what yet */ -+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ -+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ -+#define EBI_FIFO 0x00000200 /* .. use fifo */ -+#define EBI_RE 0x00000400 /* .. Reverse Endian */ -+} EbiChipSelect; -+ -+typedef struct MpiRegisters { -+ EbiChipSelect cs[7]; /* size chip select configuration */ -+#define EBI_CS0_BASE 0 -+#define EBI_CS1_BASE 1 -+#define EBI_CS2_BASE 2 -+#define EBI_CS3_BASE 3 -+#define PCMCIA_COMMON_BASE 4 -+#define PCMCIA_ATTRIBUTE_BASE 5 -+#define PCMCIA_IO_BASE 6 -+ uint32 unused0[2]; /* reserved */ -+ uint32 ebi_control; /* ebi control */ -+ uint32 unused1[4]; /* reserved */ -+#define EBI_ACCESS_TIMEOUT 0x000007FF -+ uint32 pcmcia_cntl1; /* pcmcia control 1 */ -+#define PCCARD_CARD_RESET 0x00040000 -+#define CARDBUS_ENABLE 0x00008000 -+#define PCMCIA_ENABLE 0x00004000 -+#define PCMCIA_GPIO_ENABLE 0x00002000 -+#define CARDBUS_IDSEL 0x00001F00 -+#define VS2_OEN 0x00000080 -+#define VS1_OEN 0x00000040 -+#define VS2_OUT 0x00000020 -+#define VS1_OUT 0x00000010 -+#define VS2_IN 0x00000008 -+#define VS1_IN 0x00000004 -+#define CD2_IN 0x00000002 -+#define CD1_IN 0x00000001 -+#define VS_MASK 0x0000000C -+#define CD_MASK 0x00000003 -+ uint32 unused2; /* reserved */ -+ uint32 pcmcia_cntl2; /* pcmcia control 2 */ -+#define PCMCIA_BYTESWAP_DIS 0x00000002 -+#define PCMCIA_HALFWORD_EN 0x00000001 -+#define RW_ACTIVE_CNT_BIT 2 -+#define INACTIVE_CNT_BIT 8 -+#define CE_SETUP_CNT_BIT 16 -+#define CE_HOLD_CNT_BIT 24 -+ uint32 unused3[40]; /* reserved */ -+ -+ uint32 sp0range; /* PCI to internal system bus address space */ -+ uint32 sp0remap; -+ uint32 sp0cfg; -+ uint32 sp1range; -+ uint32 sp1remap; -+ uint32 sp1cfg; -+ -+ uint32 EndianCfg; -+ -+ uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */ -+#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */ -+#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */ -+#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */ -+#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */ -+#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */ -+#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */ -+ -+ uint32 l2pmrange1; /* internal system bus to PCI memory space */ -+#define PCI_SIZE_64K 0xFFFF0000 -+#define PCI_SIZE_128K 0xFFFE0000 -+#define PCI_SIZE_256K 0xFFFC0000 -+#define PCI_SIZE_512K 0xFFF80000 -+#define PCI_SIZE_1M 0xFFF00000 -+#define PCI_SIZE_2M 0xFFE00000 -+#define PCI_SIZE_4M 0xFFC00000 -+#define PCI_SIZE_8M 0xFF800000 -+#define PCI_SIZE_16M 0xFF000000 -+#define PCI_SIZE_32M 0xFE000000 -+ uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */ -+ uint32 l2pmremap1; -+#define CARDBUS_MEM 0x00000004 -+#define MEM_WINDOW_EN 0x00000001 -+ uint32 l2pmrange2; -+ uint32 l2pmbase2; -+ uint32 l2pmremap2; -+ uint32 l2piorange; /* internal system bus to PCI I/O space */ -+ uint32 l2piobase; -+ uint32 l2pioremap; -+ -+ uint32 pcimodesel; -+#define PCI2_INT_BUS_RD_PREFECH 0x000000F0 -+#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */ -+#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */ -+ -+ uint32 pciintstat; /* PCI interrupt mask/status */ -+#define MAILBOX1_SENT 0x08 -+#define MAILBOX0_SENT 0x04 -+#define MAILBOX1_MSG_RCV 0x02 -+#define MAILBOX0_MSG_RCV 0x01 -+ uint32 locbuscntrl; /* internal system bus control */ -+#define DIR_U2P_NOSWAP 0x00000002 -+#define EN_PCI_GPIO 0x00000001 -+ uint32 locintstat; /* internal system bus interrupt mask/status */ -+#define CSERR 0x0200 -+#define SERR 0x0100 -+#define EXT_PCI_INT 0x0080 -+#define DIR_FAILED 0x0040 -+#define DIR_COMPLETE 0x0020 -+#define PCI_CFG 0x0010 -+ uint32 unused5[7]; -+ -+ uint32 mailbox0; -+ uint32 mailbox1; -+ -+ uint32 pcicfgcntrl; /* internal system bus PCI configuration control */ -+#define PCI_CFG_REG_WRITE_EN 0x00000080 -+#define PCI_CFG_ADDR 0x0000003C -+ uint32 pcicfgdata; /* internal system bus PCI configuration data */ -+ -+ uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */ -+#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */ -+#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */ -+#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */ -+#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */ -+ uint32 locch2intStat; -+#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */ -+#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */ -+#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */ -+ uint32 locch2intMask; -+ uint32 unused6; -+ uint32 locch2descaddr; -+ uint32 locch2status1; -+#define LOCAL_DESC_STATE 0xE0000000 -+#define PCI_DESC_STATE 0x1C000000 -+#define BYTE_DONE 0x03FFC000 -+#define RING_ADDR 0x00003FFF -+ uint32 locch2status2; -+#define BUFPTR_OFFSET 0x1FFF0000 -+#define PCI_MASTER_STATE 0x000000C0 -+#define LOC_MASTER_STATE 0x00000038 -+#define CONTROL_STATE 0x00000007 -+ uint32 unused7; -+ -+ uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */ -+#define DMA_U2P_LE 0x00000200 /* local bus is little endian */ -+#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */ -+ uint32 locch1intstat; -+ uint32 locch1intmask; -+ uint32 unused8; -+ uint32 locch1descaddr; -+ uint32 locch1status1; -+ uint32 locch1status2; -+ uint32 unused9; -+ -+ uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */ -+ uint32 pcich1intstat; -+ uint32 pcich1intmask; -+ uint32 pcich1descaddr; -+ uint32 pcich1status1; -+ uint32 pcich1status2; -+ -+ uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */ -+ uint32 pcich2intstat; -+ uint32 pcich2intmask; -+ uint32 pcich2descaddr; -+ uint32 pcich2status1; -+ uint32 pcich2status2; -+ -+ uint32 perm_id; /* permanent device and vendor id */ -+ uint32 perm_rev; /* permanent revision id */ -+} MpiRegisters; -+ -+#define MPI ((volatile MpiRegisters * const) MPI_BASE) -+ -+/* PCI configuration address space start offset 0x40 */ -+#define BRCM_PCI_CONFIG_TIMER 0x40 -+#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00 -+#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF -+ -+/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */ -+#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */ -+#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */ -+ -+#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI) -+ -+#if __cplusplus -+} -+#endif -+ -+#endif -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcmTag.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmTag.h ---- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcmTag.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmTag.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,153 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+//************************************************************************************** -+// File Name : bcmTag.h -+// -+// Description: add tag with validation system to the firmware image file to be uploaded -+// via http -+// -+// Created : 02/28/2002 seanl -+//************************************************************************************** -+ -+#ifndef _BCMTAG_H_ -+#define _BCMTAG_H_ -+ -+ -+#define BCM_SIG_1 "Broadcom Corporation" -+#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id. -+ -+#define BCM_TAG_VER "6" -+#define BCM_TAG_VER_LAST "26" -+ -+// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars -+#define TAG_LEN 256 -+#define TAG_VER_LEN 4 -+#define SIG_LEN 20 -+#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID -+#define CHIP_ID_LEN 6 -+#define IMAGE_LEN 10 -+#define ADDRESS_LEN 12 -+#define FLAG_LEN 2 -+#define TOKEN_LEN 20 -+#define BOARD_ID_LEN 16 -+#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \ -+ (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN)) -+ -+ -+// TAG for downloadable image (kernel plus file system) -+typedef struct _FILE_TAG -+{ -+ unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here. -+ unsigned char signiture_1[SIG_LEN]; // text line for company info -+ unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number) -+ unsigned char chipId[CHIP_ID_LEN]; // chip id -+ unsigned char boardId[BOARD_ID_LEN]; // board id -+ unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host -+ unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length -+ unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address -+ unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text. -+ unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address -+ unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text. -+ unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address -+ unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text. -+ unsigned char dualImage[FLAG_LEN]; // if 1, dual image -+ unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active -+ unsigned char reserved[RESERVED_LEN]; // reserved for later use -+ unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for -+ // now will be 4 unsigned char crc -+ unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken) -+} FILE_TAG, *PFILE_TAG; -+ -+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ -+#define CRC_LEN 4 -+ -+// only included if for bcmTag.exe program -+#ifdef BCMTAG_EXE_USE -+ -+static unsigned long Crc32_table[256] = { -+ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, -+ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, -+ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, -+ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, -+ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, -+ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, -+ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, -+ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, -+ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, -+ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, -+ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, -+ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, -+ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, -+ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, -+ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, -+ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, -+ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, -+ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, -+ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, -+ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, -+ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, -+ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, -+ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, -+ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, -+ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, -+ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, -+ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, -+ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, -+ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, -+ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, -+ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, -+ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, -+ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, -+ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, -+ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, -+ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, -+ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, -+ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, -+ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, -+ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, -+ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, -+ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, -+ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, -+ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, -+ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, -+ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, -+ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, -+ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, -+ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, -+ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, -+ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, -+ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, -+ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, -+ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, -+ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, -+ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, -+ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, -+ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, -+ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, -+ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, -+ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, -+ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, -+ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, -+ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D -+}; -+#endif // BCMTAG_USE -+ -+ -+#endif // _BCMTAG_H_ -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h ---- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,59 @@ -+/* -+<:copyright-gpl -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __BCM_INTR_H -+#define __BCM_INTR_H -+ -+#ifdef __cplusplus -+ extern "C" { -+#endif -+ -+#if defined(CONFIG_BCM96338) -+#include <6338_intr.h> -+#endif -+#if defined(CONFIG_BCM96345) -+#include <6345_intr.h> -+#endif -+#if defined(CONFIG_BCM96348) -+#include <6348_intr.h> -+#endif -+ -+/* defines */ -+struct pt_regs; -+typedef int (*FN_HANDLER) (int, void *, struct pt_regs *); -+ -+/* prototypes */ -+extern void enable_brcm_irq(unsigned int irq); -+extern void disable_brcm_irq(unsigned int irq); -+extern int request_external_irq(unsigned int irq, -+ FN_HANDLER handler, unsigned long irqflags, -+ const char * devname, void *dev_id); -+extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param, -+ unsigned int interruptId); -+extern void dump_intr_regs(void); -+ -+/* compatibility definitions */ -+#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq ) -+#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq ) -+ -+#ifdef __cplusplus -+ } -+#endif -+ -+#endif -diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h ---- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,34 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __BCM_MAP_PART_H -+#define __BCM_MAP_PART_H -+ -+#if defined(CONFIG_BCM96338) -+#include <6338_map_part.h> -+#endif -+#if defined(CONFIG_BCM96345) -+#include <6345_map_part.h> -+#endif -+#if defined(CONFIG_BCM96348) -+#include <6348_map_part.h> -+#endif -+ -+#endif -+ -diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcmpci.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmpci.h ---- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcmpci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmpci.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,87 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+// -+// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition -+// -+#ifndef BCMPCI_H -+#define BCMPCI_H -+ -+/* Memory window in internal system bus address space */ -+#define BCM_PCI_MEM_BASE 0x08000000 -+/* IO window in internal system bus address space */ -+#define BCM_PCI_IO_BASE 0x0C000000 -+ -+#define BCM_PCI_ADDR_MASK 0x1fffffff -+ -+/* Memory window size (range) */ -+#define BCM_PCI_MEM_SIZE_16MB 0x01000000 -+/* IO window size (range) */ -+#define BCM_PCI_IO_SIZE_64KB 0x00010000 -+ -+/* PCI Configuration and I/O space acesss */ -+#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) ) -+ -+/* fake USB PCI slot */ -+#define USB_HOST_SLOT 9 -+#define USB_BAR0_MEM_SIZE 0x0800 -+ -+#define BCM_HOST_MEM_SPACE1 0x10000000 -+#define BCM_HOST_MEM_SPACE2 0x00000000 -+ -+/* -+ * EBI bus clock is 33MHz and share with PCI bus -+ * each clock cycle is 30ns. -+ */ -+/* attribute memory access wait cnt for 4306 */ -+#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns -+#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns -+#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4) -+#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns -+ -+/* common memory access wait cnt for 4306 */ -+#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns -+#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns -+#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4) -+#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns -+ -+#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also -+#define PCCARD_VCC_33V 0x00010000 -+#define PCCARD_VCC_50V 0x00020000 -+ -+typedef enum { -+ MPI_CARDTYPE_NONE, // No Card in slot -+ MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot -+ MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot -+} CardType; -+ -+#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus -+ -+#define pcmciaAttrOffset 0x00200000 -+#define pcmciaMemOffset 0x00000000 -+// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA. -+#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000) -+// Base Address is that mapped into the MPI ChipSelect registers. -+// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base. -+#define pcmciaBase 0xbf000000 -+#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase) -+#define pcmciaMem (pcmciaMemOffset | pcmciaBase) -+#define pcmciaIo (pcmciaIoOffset | pcmciaBase) -+ -+#endif -diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h ---- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,163 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+// -+// bcmtypes.h - misc useful typedefs -+// -+#ifndef BCMTYPES_H -+#define BCMTYPES_H -+ -+// These are also defined in typedefs.h in the application area, so I need to -+// protect against re-definition. -+ -+#ifndef _TYPEDEFS_H_ -+typedef unsigned char uint8; -+typedef unsigned short uint16; -+typedef unsigned long uint32; -+typedef signed char int8; -+typedef signed short int16; -+typedef signed long int32; -+#if !defined(__cplusplus) -+typedef int bool; -+#endif -+#endif -+ -+typedef unsigned char byte; -+// typedef unsigned long sem_t; -+ -+typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD; -+typedef signed long LONG,*PLONG; -+ -+typedef unsigned int *PUINT; -+typedef signed int INT; -+ -+typedef unsigned short *PUSHORT; -+typedef signed short SHORT,*PSHORT; -+typedef unsigned short WORD,*PWORD; -+ -+typedef unsigned char *PUCHAR; -+typedef signed char *PCHAR; -+ -+typedef void *PVOID; -+ -+typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN; -+ -+typedef unsigned char BYTE,*PBYTE; -+ -+//#ifndef __GNUC__ -+//The following has been defined in Vxworks internally: vxTypesOld.h -+//redefine under vxworks will cause error -+typedef signed int *PINT; -+ -+typedef signed char INT8; -+typedef signed short INT16; -+typedef signed long INT32; -+ -+typedef unsigned char UINT8; -+typedef unsigned short UINT16; -+typedef unsigned long UINT32; -+ -+typedef unsigned char UCHAR; -+typedef unsigned short USHORT; -+typedef unsigned int UINT; -+typedef unsigned long ULONG; -+ -+typedef void VOID; -+typedef unsigned char BOOL; -+ -+//#endif /* __GNUC__ */ -+ -+ -+// These are also defined in typedefs.h in the application area, so I need to -+// protect against re-definition. -+#ifndef TYPEDEFS_H -+ -+// Maximum and minimum values for a signed 16 bit integer. -+#define MAX_INT16 32767 -+#define MIN_INT16 -32768 -+ -+// Useful for true/false return values. This uses the -+// Taligent notation (k for constant). -+typedef enum -+{ -+ kFalse = 0, -+ kTrue = 1 -+} Bool; -+ -+#endif -+ -+/* macros to protect against unaligned accesses */ -+ -+#if 0 -+/* first arg is an address, second is a value */ -+#define PUT16( a, d ) { \ -+ *((byte *)a) = (byte)((d)>>8); \ -+ *(((byte *)a)+1) = (byte)(d); \ -+} -+ -+#define PUT32( a, d ) { \ -+ *((byte *)a) = (byte)((d)>>24); \ -+ *(((byte *)a)+1) = (byte)((d)>>16); \ -+ *(((byte *)a)+2) = (byte)((d)>>8); \ -+ *(((byte *)a)+3) = (byte)(d); \ -+} -+ -+/* first arg is an address, returns a value */ -+#define GET16( a ) ( \ -+ (*((byte *)a) << 8) | \ -+ (*(((byte *)a)+1)) \ -+) -+ -+#define GET32( a ) ( \ -+ (*((byte *)a) << 24) | \ -+ (*(((byte *)a)+1) << 16) | \ -+ (*(((byte *)a)+2) << 8) | \ -+ (*(((byte *)a)+3)) \ -+) -+#endif -+ -+#ifndef YES -+#define YES 1 -+#endif -+ -+#ifndef NO -+#define NO 0 -+#endif -+ -+#ifndef IN -+#define IN -+#endif -+ -+#ifndef OUT -+#define OUT -+#endif -+ -+#ifndef TRUE -+#define TRUE 1 -+#endif -+ -+#ifndef FALSE -+#define FALSE 0 -+#endif -+ -+#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr)) -+#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr)) -+#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr)) -+ -+#endif -diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/board.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/board.h ---- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/board.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/board.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,368 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/***********************************************************************/ -+/* */ -+/* MODULE: board.h */ -+/* DATE: 97/02/18 */ -+/* PURPOSE: Board specific information. This module should include */ -+/* all base device addresses and board specific macros. */ -+/* */ -+/***********************************************************************/ -+#ifndef _BOARD_H -+#define _BOARD_H -+ -+#if __cplusplus -+extern "C" { -+#endif -+/*****************************************************************************/ -+/* Misc board definitions */ -+/*****************************************************************************/ -+ -+#define DYING_GASP_API -+ -+/*****************************************************************************/ -+/* Physical Memory Map */ -+/*****************************************************************************/ -+ -+#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */ -+#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */ -+ -+/*****************************************************************************/ -+/* Note that the addresses above are physical addresses and that programs */ -+/* have to use converted addresses defined below: */ -+/*****************************************************************************/ -+#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ -+#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ -+#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ -+ -+/*****************************************************************************/ -+/* Select the PLL value to get the desired CPU clock frequency. */ -+/* */ -+/* */ -+/*****************************************************************************/ -+#define FPERIPH 50000000 -+ -+#define ONEK 1024 -+#define BLK64K (64*ONEK) -+#define FLASH45_BLKS_BOOT_ROM 1 -+#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K) -+#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/ -+ -+/*****************************************************************************/ -+/* Note that the addresses above are physical addresses and that programs */ -+/* have to use converted addresses defined below: */ -+/*****************************************************************************/ -+#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ -+#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ -+#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ -+ -+/*****************************************************************************/ -+/* Select the PLL value to get the desired CPU clock frequency. */ -+/* */ -+/* */ -+/*****************************************************************************/ -+#define FPERIPH 50000000 -+ -+#define SDRAM_TYPE_ADDRESS_OFFSET 16 -+#define NVRAM_DATA_OFFSET 0x0580 -+#define NVRAM_DATA_ID 0x0f1e2d3c -+#define BOARD_SDRAM_TYPE *(unsigned long *) \ -+ (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET) -+ -+#define ONEK 1024 -+#define BLK64K (64*ONEK) -+ -+// nvram and psi flash definitions for 45 -+#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram -+#define NVRAM_PSI_DEFAULT 24 // default psi in K byes -+ -+/*****************************************************************************/ -+/* NVRAM Offset and definition */ -+/*****************************************************************************/ -+ -+#define NVRAM_VERSION_NUMBER 2 -+#define NVRAM_VERSION_NUMBER_ADDRESS 0 -+ -+#define NVRAM_BOOTLINE_LEN 256 -+#define NVRAM_BOARD_ID_STRING_LEN 16 -+#define NVRAM_MAC_ADDRESS_LEN 6 -+#define NVRAM_MAC_COUNT_MAX 32 -+ -+/*****************************************************************************/ -+/* Misc Offsets */ -+/*****************************************************************************/ -+ -+#define CFE_VERSION_OFFSET 0x0570 -+#define CFE_VERSION_MARK_SIZE 5 -+#define CFE_VERSION_SIZE 5 -+ -+typedef struct -+{ -+ unsigned long ulVersion; -+ char szBootline[NVRAM_BOOTLINE_LEN]; -+ char szBoardId[NVRAM_BOARD_ID_STRING_LEN]; -+ unsigned long ulReserved1[2]; -+ unsigned long ulNumMacAddrs; -+ unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; -+ char chReserved[2]; -+ unsigned long ulCheckSum; -+} NVRAM_DATA, *PNVRAM_DATA; -+ -+ -+/*****************************************************************************/ -+/* board ioctl calls for flash, led and some other utilities */ -+/*****************************************************************************/ -+ -+ -+/* Defines. for board driver */ -+#define BOARD_IOCTL_MAGIC 'B' -+#define BOARD_DRV_MAJOR 206 -+ -+#define MAC_ADDRESS_ANY (unsigned long) -1 -+ -+#define BOARD_IOCTL_FLASH_INIT \ -+ _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_FLASH_WRITE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_FLASH_READ \ -+ _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_NR_PAGES \ -+ _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_DUMP_ADDR \ -+ _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_SET_MEMORY \ -+ _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_MIPS_SOFT_RESET \ -+ _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_LED_CTRL \ -+ _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_ID \ -+ _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_MAC_ADDRESS \ -+ _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \ -+ _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_PSI_SIZE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_SDRAM_SIZE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_SET_MONITOR_FD \ -+ _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \ -+ _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_BOOTLINE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_SET_BOOTLINE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \ -+ _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_CHIP_ID \ -+ _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_NUM_ENET \ -+ _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_CFE_VER \ -+ _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_ENET_CFG \ -+ _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_SET_TRIGGER_EVENT \ -+ _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_TRIGGER_EVENT \ -+ _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \ -+ _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_SET_SES_LED \ -+ _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS) -+ -+ -+// for the action in BOARD_IOCTL_PARMS for flash operation -+typedef enum -+{ -+ PERSISTENT, -+ NVRAM, -+ BCM_IMAGE_CFE, -+ BCM_IMAGE_FS, -+ BCM_IMAGE_KERNEL, -+ BCM_IMAGE_WHOLE, -+ SCRATCH_PAD, -+ FLASH_SIZE, -+} BOARD_IOCTL_ACTION; -+ -+ -+typedef struct boardIoctParms -+{ -+ char *string; -+ char *buf; -+ int strLen; -+ int offset; -+ BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */ -+ int result; -+} BOARD_IOCTL_PARMS; -+ -+ -+// LED defines -+typedef enum -+{ -+ kLedAdsl, -+ kLedWireless, -+ kLedUsb, -+ kLedHpna, -+ kLedWanData, -+ kLedPPP, -+ kLedVoip, -+ kLedSes, -+ kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end. -+} BOARD_LED_NAME; -+ -+typedef enum -+{ -+ kLedStateOff, /* turn led off */ -+ kLedStateOn, /* turn led on */ -+ kLedStateFail, /* turn led on red */ -+ kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */ -+ kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */ -+ kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */ -+} BOARD_LED_STATE; -+ -+ -+// virtual and physical map pair defined in board.c -+typedef struct ledmappair -+{ -+ BOARD_LED_NAME ledName; // virtual led name -+ BOARD_LED_STATE ledInitState; // initial led state when the board boots. -+ unsigned short ledMask; // physical GPIO pin mask -+ unsigned short ledActiveLow; // reset bit to turn on LED -+ unsigned short ledMaskFail; // physical GPIO pin mask for state failure -+ unsigned short ledActiveLowFail;// reset bit to turn on LED -+} LED_MAP_PAIR, *PLED_MAP_PAIR; -+ -+typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState); -+ -+/* Flash storage address information that is determined by the flash driver. */ -+typedef struct flashaddrinfo -+{ -+ int flash_persistent_start_blk; -+ int flash_persistent_number_blk; -+ int flash_persistent_length; -+ unsigned long flash_persistent_blk_offset; -+ int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN) -+ int flash_scratch_pad_number_blk; -+ int flash_scratch_pad_length; -+ unsigned long flash_scratch_pad_blk_offset; -+ int flash_nvram_start_blk; -+ int flash_nvram_number_blk; -+ int flash_nvram_length; -+ unsigned long flash_nvram_blk_offset; -+} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO; -+ -+// scratch pad defines -+/* SP - Persisten Scratch Pad format: -+ sp header : 32 bytes -+ tokenId-1 : 8 bytes -+ tokenId-1 len : 4 bytes -+ tokenId-1 data -+ .... -+ tokenId-n : 8 bytes -+ tokenId-n len : 4 bytes -+ tokenId-n data -+*/ -+ -+#define MAGIC_NUM_LEN 8 -+#define MAGIC_NUMBER "gOGoBrCm" -+#define TOKEN_NAME_LEN 16 -+#define SP_VERSION 1 -+#define SP_MAX_LEN 8 * 1024 // 8k buf before psi -+#define SP_RESERVERD 16 -+ -+typedef struct _SP_HEADER -+{ -+ char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number -+ int SPVersion; // version number -+ int SPUsedLen; // used sp len -+ char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes -+} SP_HEADER, *PSP_HEADER; -+ -+typedef struct _TOKEN_DEF -+{ -+ char tokenName[TOKEN_NAME_LEN]; -+ int tokenLen; -+} SP_TOKEN, *PSP_TOKEN; -+ -+ -+/*****************************************************************************/ -+/* Function Prototypes */ -+/*****************************************************************************/ -+#if !defined(__ASM_ASM_H) -+void dumpaddr( unsigned char *pAddr, int nLen ); -+ -+void kerSysFlashAddrInfoGet(PFLASH_ADDR_INFO pflash_addr_info); -+int kerSysNvRamGet(char *string, int strLen, int offset); -+int kerSysNvRamSet(char *string, int strLen, int offset); -+int kerSysPersistentGet(char *string, int strLen, int offset); -+int kerSysPersistentSet(char *string, int strLen, int offset); -+int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen); -+int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen); -+int kerSysBcmImageSet( int flash_start_addr, char *string, int size); -+int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId ); -+int kerSysReleaseMacAddress( unsigned char *pucaAddr ); -+int kerSysGetSdramSize( void ); -+void kerSysGetBootline(char *string, int strLen); -+void kerSysSetBootline(char *string, int strLen); -+void kerSysMipsSoftReset(void); -+void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); -+void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int ); -+int kerSysFlashSizeGet(void); -+void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context); -+void kerSysDeregisterDyingGaspHandler(char *devname); -+void kerSysWakeupMonitorTask( void ); -+#endif -+ -+#if __cplusplus -+} -+#endif -+ -+#endif /* _BOARD_H */ -+ -diff -urN linux-2.6.8.1/boardparams/bcm963xx/Makefile linux-2.6.8.1-brcm63xx/boardparms/bcm963xx/Makefile ---- linux-2.6.8.1/boardparams/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/boardparms/bcm963xx/Makefile 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,16 @@ -+ -+ifeq ($(CONFIG_MIPS_BRCM),y) -+ -+# Linux -+obj-y += boardparms.o -+EXTRA_CFLAGS += -DCONFIG_BCM9$(BRCM_CHIP) -+-include $(TOPDIR)/Rules.make -+ -+else -+ -+# CFE -+BSPOBJS += boardparms.o -+ -+endif -+ -+ -diff -urN linux-2.6.8.1/boardparams/bcm963xx/boardparms.c linux-2.6.8.1-brcm63xx/boardparms/bcm963xx/boardparms.c ---- linux-2.6.8.1/boardparams/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/boardparms/bcm963xx/boardparms.c 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,2382 @@ -+/* -+<:copyright-gpl -+ -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ -+:> -+*/ -+/************************************************************************** -+ * File Name : boardparms.c -+ * -+ * Description: This file contains the implementation for the BCM63xx board -+ * parameter access functions. -+ * -+ * Updates : 07/14/2003 Created. -+ ***************************************************************************/ -+ -+/* Includes. */ -+#include "boardparms.h" -+ -+/* Defines. */ -+ -+/* Default psi size in K bytes */ -+#define BP_PSI_DEFAULT_SIZE 24 -+ -+/* Typedefs */ -+typedef struct boardparameters -+{ -+ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */ -+ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS]; -+ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP]; -+ unsigned short usSdramSize; /* SDRAM size and type */ -+ unsigned short usPsiSize; /* persistent storage in K bytes */ -+ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */ -+ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */ -+ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */ -+ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */ -+ unsigned short usGpioUartRts; /* GPIO pin or not defined */ -+ unsigned short usGpioUartCts; /* GPIO pin or not defined */ -+ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */ -+ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */ -+ unsigned short usGpioLedWireless; /* GPIO pin or not defined */ -+ unsigned short usGpioLedUsb; /* GPIO pin or not defined */ -+ unsigned short usGpioLedHpna; /* GPIO pin or not defined */ -+ unsigned short usGpioLedWanData; /* GPIO pin or not defined */ -+ unsigned short usGpioLedPpp; /* GPIO pin or not defined */ -+ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */ -+ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */ -+ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */ -+ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */ -+ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */ -+ unsigned short usExtIntrWireless; /* ext intr or not defined */ -+ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */ -+ unsigned short usExtIntrHpna; /* ext intr or not defined */ -+ unsigned short usCsHpna; /* chip select not defined */ -+ unsigned short usAntInUseWireless; /* antenna in use or not defined */ -+ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */ -+ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */ -+ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */ -+} BOARD_PARAMETERS, *PBOARD_PARAMETERS; -+ -+/* Variables */ -+#if defined(_BCM96338_) || defined(CONFIG_BCM96338) -+static BOARD_PARAMETERS g_bcm96338sv = -+{ -+ "96338SV", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_NOT_DEFINED, /* usGpioLedWanData */ -+ BP_NOT_DEFINED, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ -+ BP_NOT_DEFINED, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+static BOARD_PARAMETERS g_bcm96338l2m8m = -+{ -+ "96338L-2M-8M", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+static PBOARD_PARAMETERS g_BoardParms[] = -+ {&g_bcm96338sv, &g_bcm96338l2m8m, 0}; -+#endif -+ -+#if defined(_BCM96345_) || defined(CONFIG_BCM96345) -+static BOARD_PARAMETERS g_bcm96345r = -+{ -+ "96345R", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ -+ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ -+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_8_AH, /* usGpioLedWanData */ -+ BP_GPIO_9_AH, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96345gw2 = -+{ -+ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold -+ * Reset or RTS. -+ */ -+ "96345GW2", /* szBoardId */ -+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_GPIO_0_AH, /* usGpioPhySpiSck */ -+ BP_GPIO_4_AH, /* usGpioPhySpiSs */ -+ BP_GPIO_12_AH, /* usGpioPhySpiMosi */ -+ BP_GPIO_11_AH, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x04, /* numSwitchPorts */ -+ BP_ENET_CONFIG_GPIO, /* usConfigType */ -+ BP_ENET_REVERSE_MII}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_1, /* usExtIntrVoip */ -+ BP_GPIO_6_AH, /* usGpioVoipReset */ -+ BP_GPIO_15_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ -+ BP_GPIO_2_AH, /* usGpioPcmciaReset */ -+ BP_GPIO_13_AH, /* usGpioUartRts */ -+ BP_GPIO_9_AH, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_GPIO_7_AH, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_8_AH, /* usGpioLedWanData */ -+ BP_NOT_DEFINED, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_EXT_INTR_2, /* usExtIntrWireless */ -+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96345gw = -+{ -+ "96345GW", /* szBoardId */ -+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x04, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_1, /* usExtIntrVoip */ -+ BP_GPIO_6_AH, /* usGpioVoipReset */ -+ BP_GPIO_15_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ -+ BP_GPIO_1_AH, /* usGpioRj11OuterPair */ -+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ -+ BP_GPIO_2_AH, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_GPIO_10_AH, /* usGpioLedWireless */ -+ BP_GPIO_7_AH, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_8_AH, /* usGpioLedWanData */ -+ BP_NOT_DEFINED, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_EXT_INTR_2, /* usExtIntrWireless */ -+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ -+ BP_EXT_INTR_3, /* usExtIntrHpna */ -+ BP_CS_1, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96335r = -+{ -+ "96335R", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_9_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_9_AH, /* usGpioLedWanData */ -+ BP_GPIO_8_AH, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_9_AH, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96345r0 = -+{ -+ "96345R0", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_9_AH, /* usGpioLedWanData */ -+ BP_GPIO_9_AH, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96345rs = -+{ -+ "96345RS", /* szBoardId */ -+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ -+ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ -+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_8_AH, /* usGpioLedWanData */ -+ BP_GPIO_9_AH, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static PBOARD_PARAMETERS g_BoardParms[] = -+ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0, -+ &g_bcm96345rs, 0}; -+#endif -+ -+#if defined(_BCM96348_) || defined(CONFIG_BCM96348) -+ -+static BOARD_PARAMETERS g_bcm96348r = -+{ -+ "96348R", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96348lv = -+{ -+ "96348LV", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ -+ 0x02, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_GPIO_5_AL, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}}, /* usReverseMii */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96348gw = -+{ -+ "96348GW", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x03, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_2, /* usExtIntrVoip */ -+ BP_GPIO_6_AH, /* usGpioVoipReset */ -+ BP_GPIO_34_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */ -+}; -+ -+ -+static BOARD_PARAMETERS g_bcm96348gw_10 = -+{ -+ "96348GW-10", /* szBoardId */ -+ {{BP_ENET_NO_PHY}, /* ucPhyType */ -+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x04, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_2, /* usExtIntrVoip */ -+ BP_GPIO_6_AH, /* usGpioVoipReset */ -+ BP_GPIO_34_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96348gw_11 = -+{ -+ "96348GW-11", /* szBoardId */ -+ {{BP_ENET_NO_PHY}, /* ucPhyType */ -+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x04, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96348sv = -+{ -+ "96348SV", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ -+ 0x1f, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}}, /* usReverseMii */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_NOT_DEFINED, /* usGpioLedWanData */ -+ BP_NOT_DEFINED, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ -+ BP_NOT_DEFINED, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+ -+static BOARD_PARAMETERS g_bcm96348gw_dualDsp = -+{ -+ "96348GW-DualDSP", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x03, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_2, /* usExtIntrVoip */ -+ BP_UNEQUIPPED, /* usGpioVoipReset */ -+ BP_GPIO_34_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_DSP, /* ucDspType */ -+ 0x01, /* ucDspAddress */ -+ BP_EXT_INTR_3, /* usExtIntrVoip */ -+ BP_UNEQUIPPED , /* usGpioVoipReset */ -+ BP_GPIO_35_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_3}}, /* usCsVoip */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+ -+static BOARD_PARAMETERS g_bcmCustom_01 = -+{ -+ "BCMCUST_01", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_2, /* usExtIntrVoip */ -+ BP_GPIO_36_AH, /* usGpioVoipReset */ -+ BP_GPIO_34_AL, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static PBOARD_PARAMETERS g_BoardParms[] = -+ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10, -+ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp, -+ &g_bcmCustom_01, 0}; -+#endif -+ -+static PBOARD_PARAMETERS g_pCurrentBp = 0; -+ -+/************************************************************************** -+ * Name : bpstrcmp -+ * -+ * Description: String compare for this file so it does not depend on an OS. -+ * (Linux kernel and CFE share this source file.) -+ * -+ * Parameters : [IN] dest - destination string -+ * [IN] src - source string -+ * -+ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src -+ ***************************************************************************/ -+static int bpstrcmp(const char *dest,const char *src); -+static int bpstrcmp(const char *dest,const char *src) -+{ -+ while (*src && *dest) -+ { -+ if (*dest < *src) return -1; -+ if (*dest > *src) return 1; -+ dest++; -+ src++; -+ } -+ -+ if (*dest && !*src) return 1; -+ if (!*dest && *src) return -1; -+ return 0; -+} /* bpstrcmp */ -+ -+/************************************************************************** -+ * Name : BpGetVoipDspConfig -+ * -+ * Description: Gets the DSP configuration from the board parameter -+ * structure for a given DSP index. -+ * -+ * Parameters : [IN] dspNum - DSP index (number) -+ * -+ * Returns : Pointer to DSP configuration block if found/valid, NULL -+ * otherwise. -+ ***************************************************************************/ -+VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ); -+VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ) -+{ -+ VOIP_DSP_INFO *pDspConfig = 0; -+ int i; -+ -+ if( g_pCurrentBp ) -+ { -+ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ ) -+ { -+ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP && -+ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum ) -+ { -+ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i]; -+ break; -+ } -+ } -+ } -+ -+ return pDspConfig; -+} -+ -+ -+/************************************************************************** -+ * Name : BpSetBoardId -+ * -+ * Description: This function find the BOARD_PARAMETERS structure for the -+ * specified board id string and assigns it to a global, static -+ * variable. -+ * -+ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not -+ * have a board parameters configuration record. -+ ***************************************************************************/ -+int BpSetBoardId( char *pszBoardId ) -+{ -+ int nRet = BP_BOARD_ID_NOT_FOUND; -+ PBOARD_PARAMETERS *ppBp; -+ -+ for( ppBp = g_BoardParms; *ppBp; ppBp++ ) -+ { -+ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) ) -+ { -+ g_pCurrentBp = *ppBp; -+ nRet = BP_SUCCESS; -+ break; -+ } -+ } -+ -+ return( nRet ); -+} /* BpSetBoardId */ -+ -+/************************************************************************** -+ * Name : BpGetBoardIds -+ * -+ * Description: This function returns all of the supported board id strings. -+ * -+ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id -+ * strings are returned in. Each id starts at BP_BOARD_ID_LEN -+ * boundary. -+ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that -+ * were allocated in pszBoardIds. -+ * -+ * Returns : Number of board id strings returned. -+ ***************************************************************************/ -+int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ) -+{ -+ PBOARD_PARAMETERS *ppBp; -+ int i; -+ char *src; -+ char *dest; -+ -+ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize; -+ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN ) -+ { -+ dest = pszBoardIds; -+ src = (*ppBp)->szBoardId; -+ while( *src ) -+ *dest++ = *src++; -+ *dest = '\0'; -+ } -+ -+ return( i ); -+} /* BpGetBoardIds */ -+ -+/************************************************************************** -+ * Name : BpGetEthernetMacInfo -+ * -+ * Description: This function returns all of the supported board id strings. -+ * -+ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO -+ * buffers. -+ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that -+ * are pointed to by pEnetInfos. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ) -+{ -+ int i, nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) -+ { -+ if( i < BP_MAX_ENET_MACS ) -+ { -+ unsigned char *src = (unsigned char *) -+ &g_pCurrentBp->EnetMacInfos[i]; -+ unsigned char *dest = (unsigned char *) pEnetInfos; -+ int len = sizeof(ETHERNET_MAC_INFO); -+ while( len-- ) -+ *dest++ = *src++; -+ } -+ else -+ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; -+ } -+ -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) -+ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; -+ -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetEthernetMacInfo */ -+ -+/************************************************************************** -+ * Name : BpGetSdramSize -+ * -+ * Description: This function returns a constant that describees the board's -+ * SDRAM type and size. -+ * -+ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size -+ * is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetSdramSize( unsigned long *pulSdramSize ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulSdramSize = g_pCurrentBp->usSdramSize; -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ *pulSdramSize = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetSdramSize */ -+ -+/************************************************************************** -+ * Name : BpGetPsiSize -+ * -+ * Description: This function returns the persistent storage size in K bytes. -+ * -+ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent -+ * storage size is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetPsiSize( unsigned long *pulPsiSize ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulPsiSize = g_pCurrentBp->usPsiSize; -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ *pulPsiSize = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPsiSize */ -+ -+/************************************************************************** -+ * Name : BpGetRj11InnerOuterPairGpios -+ * -+ * Description: This function returns the GPIO pin assignments for changing -+ * between the RJ11 inner pair and RJ11 outer pair. -+ * -+ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair -+ * GPIO pin is returned in. -+ * [OUT] pusOuter - Address of short word that the RJ11 outer pair -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, values are returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, -+ unsigned short *pusOuter ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusInner = g_pCurrentBp->usGpioRj11InnerPair; -+ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair; -+ -+ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED && -+ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusInner = *pusOuter = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetRj11InnerOuterPairGpios */ -+ -+/************************************************************************** -+ * Name : BpGetPressAndHoldResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the press -+ * and hold reset button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the press and hold -+ * reset button GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPressAndHoldResetGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset; -+ -+ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPressAndHoldResetGpio */ -+ -+/************************************************************************** -+ * Name : BpGetVoipResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the VOIP -+ * Reset operation. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset -+ * GPIO pin is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); -+ -+ if( pDspInfo ) -+ { -+ *pusValue = pDspInfo->usGpioVoipReset; -+ -+ if( *pusValue != BP_NOT_DEFINED || -+ *pusValue == BP_UNEQUIPPED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipResetGpio */ -+ -+/************************************************************************** -+ * Name : BpGetVoipIntrGpio -+ * -+ * Description: This function returns the GPIO pin assignment for VoIP interrupt. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt -+ * GPIO pin is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); -+ -+ if( pDspInfo ) -+ { -+ *pusValue = pDspInfo->usGpioVoipIntr; -+ -+ if( *pusValue != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipIntrGpio */ -+ -+/************************************************************************** -+ * Name : BpGetPcmciaResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PCMCIA -+ * Reset operation. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPcmciaResetGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioPcmciaReset; -+ -+ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPcmciaResetGpio */ -+ -+/************************************************************************** -+ * Name : BpGetUartRtsCtsGpios -+ * -+ * Description: This function returns the GPIO pin assignments for RTS and CTS -+ * UART signals. -+ * -+ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO -+ * pin is returned in. -+ * [OUT] pusCts - Address of short word that the UART CTS GPIO -+ * pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, values are returned. -+ * BP_BOARD_ID_NOT_SET - Error, board id input string does not -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusRts = g_pCurrentBp->usGpioUartRts; -+ *pusCts = g_pCurrentBp->usGpioUartCts; -+ -+ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED && -+ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusRts = *pusCts = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetUartRtsCtsGpios */ -+ -+/************************************************************************** -+ * Name : BpGetAdslLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the ADSL -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedAdsl; -+ -+ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetAdslLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetAdslFailLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the ADSL -+ * LED that is used when there is a DSL connection failure. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslFailLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedAdslFail; -+ -+ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetAdslFailLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedWireless; -+ -+ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWirelessLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessAntInUse -+ * -+ * Description: This function returns the antennas in use for wireless -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna -+ * is in use. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessAntInUse( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usAntInUseWireless; -+ -+ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWirelessAntInUse */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesBtnGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * Ses Button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesBtnGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioSesBtnWireless; -+ -+ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWirelessSesBtnGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesExtIntr -+ * -+ * Description: This function returns the external interrupt number for the -+ * Wireless Ses Button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * external interrup is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesExtIntr( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless; -+ -+ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+ -+} /* BpGetWirelessSesExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * Ses Led. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * Led GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedSesWireless; -+ -+ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+ -+} /* BpGetWirelessSesLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetUsbLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the USB -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the USB LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetUsbLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedUsb; -+ -+ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetUsbLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetHpnaLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the HPNA -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedHpna; -+ -+ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetHpnaLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWanDataLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the WAN Data -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWanDataLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedWanData; -+ -+ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWanDataLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetPppLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PPP -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPppLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedPpp; -+ -+ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPppLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetPppFailLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PPP -+ * LED that is used when there is a PPP connection failure. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPppFailLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedPppFail; -+ -+ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPppFailLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetBootloaderPowerOnLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the power -+ * on LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn; -+ -+ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetBootloaderPowerOn */ -+ -+/************************************************************************** -+ * Name : BpGetBootloaderAlarmLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the alarm -+ * LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedBlAlarm; -+ -+ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetBootloaderAlarmLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetBootloaderResetCfgLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the reset -+ * configuration LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the reset -+ * configuration LED GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg; -+ -+ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetBootloaderResetCfgLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetBootloaderStopLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the break -+ * into bootloader LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the break into -+ * bootloader LED GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderStopLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedBlStop; -+ -+ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetBootloaderStopLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetVoipLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the VOIP -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ * -+ * Note : The VoIP structure would allow for having one LED per DSP -+ * however, the board initialization function assumes only one -+ * LED per functionality (ie one LED for VoIP). Therefore in -+ * order to keep this tidy and simple we do not make usage of the -+ * one-LED-per-DSP function. Instead, we assume that the LED for -+ * VoIP is unique and associated with DSP 0 (always present on -+ * any VoIP platform). If changing this to a LED-per-DSP function -+ * then one need to update the board initialization driver in -+ * bcmdrivers\opensource\char\board\bcm963xx\impl1 -+ ***************************************************************************/ -+int BpGetVoipLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 ); -+ -+ if( pDspInfo ) -+ { -+ *pusValue = pDspInfo->usGpioLedVoip; -+ -+ if( *pusValue != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessExtIntr -+ * -+ * Description: This function returns the Wireless external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the wireless -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessExtIntr( unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulValue = g_pCurrentBp->usExtIntrWireless; -+ -+ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWirelessExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetAdslDyingGaspExtIntr -+ * -+ * Description: This function returns the ADSL Dying Gasp external interrupt -+ * number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp; -+ -+ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetAdslDyingGaspExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetVoipExtIntr -+ * -+ * Description: This function returns the VOIP external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the VOIP -+ * external interrupt number is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); -+ -+ if( pDspInfo ) -+ { -+ *pulValue = pDspInfo->usExtIntrVoip; -+ -+ if( *pulValue != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetHpnaExtIntr -+ * -+ * Description: This function returns the HPNA external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the HPNA -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaExtIntr( unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulValue = g_pCurrentBp->usExtIntrHpna; -+ -+ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetHpnaExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetHpnaChipSelect -+ * -+ * Description: This function returns the HPNA chip select number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the HPNA -+ * chip select number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaChipSelect( unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulValue = g_pCurrentBp->usCsHpna; -+ -+ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetHpnaChipSelect */ -+ -+/************************************************************************** -+ * Name : BpGetVoipChipSelect -+ * -+ * Description: This function returns the VOIP chip select number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the VOIP -+ * chip select number is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); -+ -+ if( pDspInfo ) -+ { -+ *pulValue = pDspInfo->usCsVoip; -+ -+ if( *pulValue != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipChipSelect */ -+ -diff -urN linux-2.6.8.1/boardparams/bcm963xx/boardparms.h linux-2.6.8.1-brcm63xx/boardparms/bcm963xx/boardparms.h ---- linux-2.6.8.1/boardparams/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.8.1-brcm63xx/boardparms/bcm963xx/boardparms.h 2006-06-26 09:07:10.000000000 +0200 -@@ -0,0 +1,766 @@ -+/* -+<:copyright-gpl -+ -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ -+:> -+*/ -+/************************************************************************** -+ * File Name : boardparms.h -+ * -+ * Description: This file contains definitions and function prototypes for -+ * the BCM63xx board parameter access functions. -+ * -+ * Updates : 07/14/2003 Created. -+ ***************************************************************************/ -+ -+#if !defined(_BOARDPARMS_H) -+#define _BOARDPARMS_H -+#define CONFIG_BCM96348 -+#if __cplusplus -+extern "C" { -+#endif -+ -+/* Return codes. */ -+#define BP_SUCCESS 0 -+#define BP_BOARD_ID_NOT_FOUND 1 -+#define BP_VALUE_NOT_DEFINED 2 -+#define BP_BOARD_ID_NOT_SET 3 -+ -+/* Values for BpGetSdramSize. */ -+#define BP_MEMORY_8MB_1_CHIP 0 -+#define BP_MEMORY_16MB_1_CHIP 1 -+#define BP_MEMORY_32MB_1_CHIP 2 -+#define BP_MEMORY_64MB_2_CHIP 3 -+#define BP_MEMORY_32MB_2_CHIP 4 -+#define BP_MEMORY_16MB_2_CHIP 5 -+ -+/* Values for EthernetMacInfo PhyType. */ -+#define BP_ENET_NO_PHY 0 -+#define BP_ENET_INTERNAL_PHY 1 -+#define BP_ENET_EXTERNAL_PHY 2 -+#define BP_ENET_EXTERNAL_SWITCH 3 -+ -+/* Values for EthernetMacInfo Configuration type. */ -+#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */ -+#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */ -+#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */ -+#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */ -+#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */ -+#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */ -+#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */ -+ -+/* Values for EthernetMacInfo Reverse MII. */ -+#define BP_ENET_NO_REVERSE_MII 0 -+#define BP_ENET_REVERSE_MII 1 -+ -+/* Values for VoIPDSPInfo DSPType. */ -+#define BP_VOIP_NO_DSP 0 -+#define BP_VOIP_DSP 1 -+ -+ -+/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */ -+#define BP_ACTIVE_MASK 0x8000 -+#define BP_ACTIVE_HIGH 0x0000 -+#define BP_ACTIVE_LOW 0x8000 -+#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH) -+#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW) -+#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH) -+#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW) -+#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH) -+#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW) -+#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH) -+#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW) -+#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH) -+#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW) -+#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH) -+#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW) -+#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH) -+#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW) -+#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH) -+#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW) -+#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH) -+#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW) -+#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH) -+#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW) -+#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH) -+#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW) -+#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH) -+#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW) -+#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH) -+#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW) -+#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH) -+#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW) -+#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH) -+#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW) -+#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH) -+#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW) -+#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH) -+#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW) -+#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH) -+#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW) -+#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH) -+#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW) -+#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH) -+#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW) -+#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH) -+#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW) -+#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH) -+#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW) -+#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH) -+#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW) -+#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH) -+#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW) -+#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH) -+#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW) -+#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH) -+#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW) -+#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH) -+#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW) -+#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH) -+#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW) -+#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH) -+#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW) -+#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH) -+#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW) -+#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH) -+#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW) -+#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH) -+#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW) -+#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH) -+#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW) -+#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH) -+#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW) -+#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH) -+#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW) -+#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH) -+#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW) -+#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH) -+#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW) -+ -+/* Values for external interrupt assignments. */ -+#define BP_EXT_INTR_0 0 -+#define BP_EXT_INTR_1 1 -+#define BP_EXT_INTR_2 2 -+#define BP_EXT_INTR_3 3 -+ -+/* Values for chip select assignments. */ -+#define BP_CS_0 0 -+#define BP_CS_1 1 -+#define BP_CS_2 2 -+#define BP_CS_3 3 -+ -+/* Value for GPIO and external interrupt fields that are not used. */ -+#define BP_NOT_DEFINED 0xffff -+#define BP_HW_DEFINED 0xfff0 -+#define BP_UNEQUIPPED 0xfff1 -+ -+/* Maximum size of the board id string. */ -+#define BP_BOARD_ID_LEN 16 -+ -+/* Maximum number of Ethernet MACs. */ -+#define BP_MAX_ENET_MACS 2 -+ -+/* Maximum number of VoIP DSPs. */ -+#define BP_MAX_VOIP_DSP 2 -+ -+/* Wireless Antenna Settings. */ -+#define BP_WLAN_ANT_MAIN 0 -+#define BP_WLAN_ANT_AUX 1 -+#define BP_WLAN_ANT_BOTH 3 -+ -+#if !defined(__ASSEMBLER__) -+ -+/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY, -+ * then the other fields are not valid. -+ */ -+typedef struct EthernetMacInfo -+{ -+ unsigned char ucPhyType; /* BP_ENET_xxx */ -+ unsigned char ucPhyAddress; /* 0 to 31 */ -+ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */ -+ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */ -+ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */ -+ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */ -+ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */ -+ unsigned short numSwitchPorts; /* Number of PHY ports */ -+ unsigned short usConfigType; /* Configuration type */ -+ unsigned short usReverseMii; /* Reverse MII */ -+} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO; -+ -+ -+/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP, -+ * then the other fields are not valid. -+ */ -+typedef struct VoIPDspInfo -+{ -+ unsigned char ucDspType; -+ unsigned char ucDspAddress; -+ unsigned short usExtIntrVoip; -+ unsigned short usGpioVoipReset; -+ unsigned short usGpioVoipIntr; -+ unsigned short usGpioLedVoip; -+ unsigned short usCsVoip; -+ -+} VOIP_DSP_INFO; -+ -+ -+/************************************************************************** -+ * Name : BpSetBoardId -+ * -+ * Description: This function find the BOARD_PARAMETERS structure for the -+ * specified board id string and assigns it to a global, static -+ * variable. -+ * -+ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not -+ * have a board parameters configuration record. -+ ***************************************************************************/ -+int BpSetBoardId( char *pszBoardId ); -+ -+/************************************************************************** -+ * Name : BpGetBoardIds -+ * -+ * Description: This function returns all of the supported board id strings. -+ * -+ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id -+ * strings are returned in. Each id starts at BP_BOARD_ID_LEN -+ * boundary. -+ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that -+ * were allocated in pszBoardIds. -+ * -+ * Returns : Number of board id strings returned. -+ ***************************************************************************/ -+int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ); -+ -+/************************************************************************** -+ * Name : BpGetEthernetMacInfo -+ * -+ * Description: This function returns all of the supported board id strings. -+ * -+ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO -+ * buffers. -+ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that -+ * are pointed to by pEnetInfos. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ); -+ -+/************************************************************************** -+ * Name : BpGetSdramSize -+ * -+ * Description: This function returns a constant that describees the board's -+ * SDRAM type and size. -+ * -+ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size -+ * is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetSdramSize( unsigned long *pulSdramSize ); -+ -+/************************************************************************** -+ * Name : BpGetPsiSize -+ * -+ * Description: This function returns the persistent storage size in K bytes. -+ * -+ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent -+ * storage size is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetPsiSize( unsigned long *pulPsiSize ); -+ -+/************************************************************************** -+ * Name : BpGetRj11InnerOuterPairGpios -+ * -+ * Description: This function returns the GPIO pin assignments for changing -+ * between the RJ11 inner pair and RJ11 outer pair. -+ * -+ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair -+ * GPIO pin is returned in. -+ * [OUT] pusOuter - Address of short word that the RJ11 outer pair -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, values are returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, -+ unsigned short *pusOuter ); -+ -+/************************************************************************** -+ * Name : BpGetPressAndHoldResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the press -+ * and hold reset button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the press and hold -+ * reset button GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPressAndHoldResetGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the VOIP -+ * Reset operation. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset -+ * GPIO pin is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipIntrGpio -+ * -+ * Description: This function returns the GPIO pin assignment for VoIP interrupt. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt -+ * GPIO pin is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetPcmciaResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PCMCIA -+ * Reset operation. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPcmciaResetGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetUartRtsCtsGpios -+ * -+ * Description: This function returns the GPIO pin assignments for RTS and CTS -+ * UART signals. -+ * -+ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO -+ * pin is returned in. -+ * [OUT] pusCts - Address of short word that the UART CTS GPIO -+ * pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, values are returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ); -+ -+/************************************************************************** -+ * Name : BpGetAdslLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the ADSL -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetAdslFailLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the ADSL -+ * LED that is used when there is a DSL connection failure. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslFailLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessAntInUse -+ * -+ * Description: This function returns the antennas in use for wireless -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna -+ * is in use. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessAntInUse( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesBtnGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * Ses Button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * Button GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesBtnGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesExtIntr -+ * -+ * Description: This function returns the external interrupt number for the -+ * Wireless Ses Button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * external interrup is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesExtIntr( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * Ses Led. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * Led GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetUsbLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the USB -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the USB LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetUsbLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetHpnaLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the HPNA -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWanDataLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the WAN Data -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWanDataLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetPppLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PPP -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPppLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetPppFailLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PPP -+ * LED that is used when there is a PPP connection failure. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPppFailLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the VOIP -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetBootloaderPowerOnLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the power -+ * on LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetBootloaderAlarmLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the alarm -+ * LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetBootloaderResetCfgLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the reset -+ * configuration LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the reset -+ * configuration LED GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetBootloaderStopLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the break -+ * into bootloader LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the break into -+ * bootloader LED GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderStopLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessExtIntr -+ * -+ * Description: This function returns the Wireless external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the wireless -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessExtIntr( unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetAdslDyingGaspExtIntr -+ * -+ * Description: This function returns the ADSL Dying Gasp external interrupt -+ * number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipExtIntr -+ * -+ * Description: This function returns the VOIP external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the VOIP -+ * external interrupt number is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetHpnaExtIntr -+ * -+ * Description: This function returns the HPNA external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the HPNA -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaExtIntr( unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetHpnaChipSelect -+ * -+ * Description: This function returns the HPNA chip select number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the HPNA -+ * chip select number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaChipSelect( unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipChipSelect -+ * -+ * Description: This function returns the VOIP chip select number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the VOIP -+ * chip select number is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ); -+ -+#endif /* __ASSEMBLER__ */ -+ -+#if __cplusplus -+} -+#endif -+ -+#endif /* _BOARDPARMS_H */ -+ ---- linux-2.6.8.1/scripts/kconfig/mconf.c 2004-08-14 12:54:51.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/scripts/kconfig/mconf.c 2006-06-26 10:07:52.000000000 +0200 -@@ -88,7 +88,7 @@ - static int indent; - static struct termios ios_org; - static int rows = 0, cols = 0; --static struct menu *current_menu; -+struct menu *current_menu; /* Fails while cross-compiling if keeping static */ - static int child_count; - static int do_resize; - static int single_menu_mode; ---- linux-2.6.8.1/Makefile 2004-08-14 12:55:35.000000000 +0200 -+++ linux-2.6.8.1-brcm63xx/Makefile 2006-06-26 10:43:09.000000000 +0200 -@@ -149,9 +149,7 @@ - # then ARCH is assigned, getting whatever value it gets normally, and - # SUBARCH is subsequently ignored. - --SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ -- -e s/arm.*/arm/ -e s/sa110/arm/ \ -- -e s/s390x/s390/ -e s/parisc64/parisc/ ) -+SUBARCH := mips - - # Cross compiling and selecting different set of gcc/bin-utils - # --------------------------------------------------------------------------- -@@ -294,7 +292,7 @@ - - NOSTDINC_FLAGS = -nostdinc -iwithprefix include - --CPPFLAGS := -D__KERNEL__ -Iinclude \ -+CPPFLAGS := -D__KERNEL__ -Iinclude -Ibcmdrivers/opensource/include/bcm963xx/ -Iboardparms/bcm963xx/ -Ibcmdrivers/broadcom/include/bcm963xx/ -Ibcmdrivers/broadcom/char/adsl/bcm96348\ - $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) - - CFLAGS := -Wall -Wstrict-prototypes -Wno-trigraphs \ -@@ -405,6 +403,13 @@ - core-y := usr/ - endif # KBUILD_EXTMOD - -+# CONFIG_MIPS_BRCM Begin Broadcom changed code. -+BRCMDRIVERS_DIR := $(TOPDIR)/bcmdrivers -+export HPATH := $(TOPDIR)/include -+brcmdrivers-y := $(TOPDIR)/boardparms/bcm963xx/ $(BRCMDRIVERS_DIR)/ -+BRCMDRIVERS := $(brcmdrivers-y) -+# CONFIG_MIPS_BRCM End Broadcom changed code. -+ - ifeq ($(dot-config),1) - # In this section, we need .config - -@@ -473,6 +478,10 @@ - # makefile but the arguement can be passed to make if needed. - # - -+# CONFIG_MIPS_BRCM Begin Broadcom changed code. -+INSTALL_MOD_PATH := $(PROFILE_DIR)/modules -+# CONFIG_MIPS_BRCM End Broadcom changed code. -+ - MODLIB := $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) - export MODLIB - -@@ -480,18 +489,25 @@ - ifeq ($(KBUILD_EXTMOD),) - core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ - -+# CONFIG_MIPS_BRCM Begin Broadcom changed code. - vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \ - $(core-y) $(core-m) $(drivers-y) $(drivers-m) \ -+ $(brcmdrivers-y) $(brcmdrivers-m) \ - $(net-y) $(net-m) $(libs-y) $(libs-m))) - - vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \ - $(init-n) $(init-) \ - $(core-n) $(core-) $(drivers-n) $(drivers-) \ -+ $(brcmdrivers-n) $(brcmdrivers-) \ - $(net-n) $(net-) $(libs-n) $(libs-)))) -+# CONFIG_MIPS_BRCM End Broadcom changed code. - - init-y := $(patsubst %/, %/built-in.o, $(init-y)) - core-y := $(patsubst %/, %/built-in.o, $(core-y)) - drivers-y := $(patsubst %/, %/built-in.o, $(drivers-y)) -+# CONFIG_MIPS_BRCM Begin Broadcom changed code. -+brcmdrivers-y := $(patsubst %/, %/built-in.o, $(brcmdrivers-y)) -+# CONFIG_MIPS_BRCM End Broadcom changed code. - net-y := $(patsubst %/, %/built-in.o, $(net-y)) - libs-y1 := $(patsubst %/, %/lib.a, $(libs-y)) - libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y)) -@@ -507,7 +523,8 @@ - # we cannot yet know if we will need to relink vmlinux. - # So we descend into init/ inside the rule for vmlinux again. - head-y += $(HEAD) --vmlinux-objs := $(head-y) $(init-y) $(core-y) $(libs-y) $(drivers-y) $(net-y) -+# CONFIG_MIPS_BRCM Begin Broadcom changed code. -+vmlinux-objs := $(head-y) $(init-y) $(core-y) $(libs-y) $(drivers-y) $(brcmdrivers-y) $(net-y) - - quiet_cmd_vmlinux__ = LD $@ - define cmd_vmlinux__ -@@ -516,11 +533,13 @@ - $(core-y) \ - $(libs-y) \ - $(drivers-y) \ -+ $(brcmdrivers-y) \ - $(net-y) \ - --end-group \ - $(filter .tmp_kallsyms%,$^) \ - -o $@ - endef -+# CONFIG_MIPS_BRCM End Broadcom changed code. - - # set -e makes the rule exit immediately on error - -@@ -603,9 +622,12 @@ - $(rule_verify_kallsyms) - endef - --vmlinux: $(vmlinux-objs) $(kallsyms.o) arch/$(ARCH)/kernel/vmlinux.lds.s FORCE -+# CONFIG_MIPS_BRCM Begin Broadcom changed code. -+vmlinux: preparebrcmdriver $(vmlinux-objs) $(kallsyms.o) arch/$(ARCH)/kernel/vmlinux.lds.s FORCE - $(call if_changed_rule,vmlinux) - -+# CONFIG_MIPS_BRCM End Broadcom changed code. -+ - # The actual objects are generated when descending, - # make sure no implicit rule kicks in - -@@ -626,7 +648,13 @@ - # A multi level approach is used. prepare1 is updated first, then prepare0. - # prepare-all is the collection point for the prepare targets. - --.PHONY: prepare-all prepare prepare0 prepare1 prepare2 -+# CONFIG_MIPS_BRCM Begin Broadcom changed code. -+.PHONY: prepare-all prepare prepare0 prepare1 prepare2 preparebrcmdriver -+ -+preparebrcmdriver: -+# $(Q)$(MAKE) -C $(BRCMDRIVERS_DIR)/opensource symlinks -+ $(Q)$(MAKE) -C $(BRCMDRIVERS_DIR)/broadcom symlinks -+# CONFIG_MIPS_BRCM End Broadcom changed code. - - # prepare 2 generate Makefile to be placed in output directory, if - # using a seperate output directory. This allows convinient use -@@ -743,7 +771,10 @@ - # Build modules - - .PHONY: modules --modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) -+# CONFIG_MIPS_BRCM Begin Broadcom changed code. -+modules: preparebrcmdriver $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) -+#modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) -+# CONFIG_MIPS_BRCM End Broadcom changed code. - @echo ' Building modules, stage 2.'; - $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost - -@@ -754,23 +785,31 @@ - - # Target to install modules - .PHONY: modules_install --modules_install: _modinst_ _modinst_post -+# CONFIG_MIPS_BRCM Begin Broadcom changed code. -+#modules_install: _modinst_ _modinst_post -+#We have no need for it "_modinst_post" -+modules_install: _modinst_ -+# CONFIG_MIPS_BRCM End Broadcom changed code. - - .PHONY: _modinst_ - _modinst_: -- @if [ -z "`$(DEPMOD) -V | grep module-init-tools`" ]; then \ -- echo "Warning: you may need to install module-init-tools"; \ -- echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\ -- sleep 1; \ -- fi -+# CONFIG_MIPS_BRCM Begin Broadcom changed code. -+# @if [ -z "`$(DEPMOD) -V | grep module-init-tools`" ]; then \ -+# echo "Warning: you may need to install module-init-tools"; \ -+# echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\ -+# sleep 1; \ -+# fi -+# CONFIG_MIPS_BRCM End Broadcom changed code. - @rm -rf $(MODLIB)/kernel - @rm -f $(MODLIB)/source - @mkdir -p $(MODLIB)/kernel -- @ln -s $(srctree) $(MODLIB)/source -- @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \ -- rm -f $(MODLIB)/build ; \ -- ln -s $(objtree) $(MODLIB)/build ; \ -- fi -+# CONFIG_MIPS_BRCM Begin Broadcom changed code -+# @ln -s $(srctree) $(MODLIB)/source -+# @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \ -+# rm -f $(MODLIB)/build ; \ -+# ln -s $(objtree) $(MODLIB)/build ; \ -+# fi -+# CONFIG_MIPS_BRCM End Broadcom changed code. - $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst - - # If System.map exists, run depmod. This deliberately does not have a -@@ -853,10 +892,12 @@ - clean: archclean $(clean-dirs) - $(call cmd,rmdirs) - $(call cmd,rmfiles) -+# CONFIG_MIPS_BRCM Begin Broadcom changed code. - @find . $(RCS_FIND_IGNORE) \ - \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ - -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \ - -type f -print | xargs rm -f -+# CONFIG_MIPS_BRCM End Broadcom changed code. - - # mrproper - Delete all generated files, including .config - # -@@ -883,7 +924,7 @@ - -o -name '.*.rej' -o -size 0 \ - -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \ - -type f -print | xargs rm -f -- -+ rm vmlinux.bin vmlinux.lz - - # Packaging of the kernel to various formats - # --------------------------------------------------------------------------- diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/001-brcm_boards.patch b/openwrt/target/linux/brcm63xx-2.6/patches/001-brcm_boards.patch new file mode 100644 index 0000000000..b91cb25d66 --- /dev/null +++ b/openwrt/target/linux/brcm63xx-2.6/patches/001-brcm_boards.patch @@ -0,0 +1,9059 @@ +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/bcm63xx_flash.c linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/bcm63xx_flash.c +--- linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/bcm63xx_flash.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/bcm63xx_flash.c 2006-07-07 22:16:32.000000000 +0200 +@@ -0,0 +1,775 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ *************************************************************************** ++ * File Name : bcm63xx_flash.c ++ * ++ * Description: This file contains the flash device driver APIs for bcm63xx board. ++ * ++ * Created on : 8/10/2002 seanl: use cfiflash.c, cfliflash.h (AMD specific) ++ * ++ ***************************************************************************/ ++ ++ ++/* Includes. */ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#define BCMTAG_EXE_USE ++#include ++#include "cfiflash.h" ++#include "boardparms.h" ++ ++//#define DEBUG_FLASH ++ ++static FLASH_ADDR_INFO fInfo; ++static int flashInitialized = 0; ++ ++void *retriedKmalloc(size_t size) ++{ ++ void *pBuf; ++ int tryCount = 0; ++ ++ // try 1000 times before quit ++ while (((pBuf = kmalloc(size, GFP_KERNEL)) == NULL) && (tryCount++ < 1000)) ++ { ++ current->state = TASK_INTERRUPTIBLE; ++ schedule_timeout(HZ/10); ++ } ++ if (tryCount >= 1000) ++ pBuf = NULL; ++ else ++ memset(pBuf, 0, size); ++ ++ return pBuf; ++} ++ ++void retriedKfree(void *pBuf) ++{ ++ kfree(pBuf); ++} ++ ++/*************************************************************************** ++// Function Name: getCrc32 ++// Description : caculate the CRC 32 of the given data. ++// Parameters : pdata - array of data. ++// size - number of input data bytes. ++// crc - either CRC32_INIT_VALUE or previous return value. ++// Returns : crc. ++****************************************************************************/ ++UINT32 getCrc32(byte *pdata, UINT32 size, UINT32 crc) ++{ ++ while (size-- > 0) ++ crc = (crc >> 8) ^ Crc32_table[(crc ^ *pdata++) & 0xff]; ++ ++ return crc; ++} ++ ++// get the nvram start addr ++// ++unsigned long get_nvram_start_addr(void) ++{ ++ return ((unsigned long) ++ (flash_get_memptr(fInfo.flash_nvram_start_blk) + fInfo.flash_nvram_blk_offset)); ++} ++ ++// get the scratch_pad start addr ++// ++unsigned long get_scratch_pad_start_addr(void) ++{ ++ return ((unsigned long) ++ (flash_get_memptr(fInfo.flash_scratch_pad_start_blk) + fInfo.flash_scratch_pad_blk_offset)); ++} ++ ++ ++ ++/* ********************************************************************* ++ * kerSysImageTagGet() ++ * Get the image tag ++ * Input parameters: ++ * none ++ * Return value: ++ * point to tag -- Found ++ * NULL -- failed ++ ********************************************************************* */ ++PFILE_TAG kerSysImageTagGet(void) ++{ ++ int i; ++ int totalBlks = flash_get_numsectors(); ++ UINT32 crc; ++ unsigned char *sectAddr; ++ PFILE_TAG pTag; ++ ++#if defined(DEBUG_FLASH) ++ printk("totalblks in tagGet=%d\n", totalBlks); ++#endif ++ ++ // start from 2nd blk, assume 1st one is always CFE ++ for (i = 1; i < totalBlks; i++) ++ { ++ sectAddr = flash_get_memptr((byte) i); ++ crc = CRC32_INIT_VALUE; ++ crc = getCrc32(sectAddr, (UINT32)TAG_LEN-TOKEN_LEN, crc); ++ pTag = (PFILE_TAG) sectAddr; ++ ++#if defined(DEBUG_FLASH) ++ printk("Check Tag crc on blk [%d]\n", i); ++#endif ++ ++ if (crc == (UINT32)(*(UINT32*)(pTag->tagValidationToken))) ++ return pTag; ++ } ++ ++ return (PFILE_TAG) NULL; ++} ++ ++// Initialize the flash and fill out the fInfo structure ++void kerSysFlashInit( void ) ++{ ++ int i = 0; ++ int totalBlks = 0; ++ int totalSize = 0; ++ int startAddr = 0; ++ int usedBlkSize = 0; ++ NVRAM_DATA nvramData; ++ UINT32 crc = CRC32_INIT_VALUE, savedCrc; ++ PFILE_TAG pTag = NULL; ++ unsigned long kernelEndAddr = 0; ++ unsigned long spAddr = 0; ++ ++ if (flashInitialized) ++ return; ++ ++ flashInitialized = 1; ++ flash_init(); ++ ++ totalBlks = flash_get_numsectors(); ++ totalSize = flash_get_total_size(); ++ ++ printk("Total Flash size: %dK with %d sectors\n", totalSize/1024, totalBlks); ++ ++ /* nvram is always at the end of flash */ ++ fInfo.flash_nvram_length = FLASH45_LENGTH_NVRAM; ++ fInfo.flash_nvram_start_blk = 0; /* always the first block */ ++ fInfo.flash_nvram_number_blk = 1; /*always fits in the first block */ ++ fInfo.flash_nvram_blk_offset = NVRAM_DATA_OFFSET; ++ ++ // check nvram CRC ++ memcpy((char *)&nvramData, (char *)get_nvram_start_addr(), sizeof(NVRAM_DATA)); ++ savedCrc = nvramData.ulCheckSum; ++ nvramData.ulCheckSum = 0; ++ crc = getCrc32((char *)&nvramData, (UINT32) sizeof(NVRAM_DATA), crc); ++ ++ BpSetBoardId( nvramData.szBoardId ); ++ ++ fInfo.flash_persistent_length = NVRAM_PSI_DEFAULT; ++ if (savedCrc != crc) ++ { ++ printk("***Board is not initialized****: Using the default PSI size: %d\n", ++ fInfo.flash_persistent_length); ++ } ++ else ++ { ++ unsigned long ulPsiSize; ++ if( BpGetPsiSize( &ulPsiSize ) == BP_SUCCESS ) ++ fInfo.flash_persistent_length = ulPsiSize; ++ else ++ { ++ printk("***Board id is not set****: Using the default PSI size: %d\n", ++ fInfo.flash_persistent_length); ++ } ++ } ++ ++ fInfo.flash_persistent_length *= ONEK; ++ startAddr = totalSize - fInfo.flash_persistent_length; ++ fInfo.flash_persistent_start_blk = flash_get_blk(startAddr+FLASH_BASE_ADDR_REG); ++ fInfo.flash_persistent_number_blk = totalBlks - fInfo.flash_persistent_start_blk; ++ // save abs SP address (Scratch Pad). it is before PSI ++ spAddr = startAddr - SP_MAX_LEN ; ++ // find out the offset in the start_blk ++ usedBlkSize = 0; ++ for (i = fInfo.flash_persistent_start_blk; ++ i < (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk); i++) ++ { ++ usedBlkSize += flash_get_sector_size((byte) i); ++ } ++ fInfo.flash_persistent_blk_offset = usedBlkSize - fInfo.flash_persistent_length; ++ ++ // get the info for sp ++ if (!(pTag = kerSysImageTagGet())) ++ { ++ printk("Failed to read image tag from flash\n"); ++ return; ++ } ++ kernelEndAddr = (unsigned long) simple_strtoul(pTag->kernelAddress, NULL, 10) + \ ++ (unsigned long) simple_strtoul(pTag->kernelLen, NULL, 10); ++ ++ // make suer sp does not share kernel block ++ fInfo.flash_scratch_pad_start_blk = flash_get_blk(spAddr+FLASH_BASE_ADDR_REG); ++ if (fInfo.flash_scratch_pad_start_blk != flash_get_blk(kernelEndAddr)) ++ { ++ fInfo.flash_scratch_pad_length = SP_MAX_LEN; ++ if (fInfo.flash_persistent_start_blk == fInfo.flash_scratch_pad_start_blk) // share blk ++ { ++#if 1 /* do not used scratch pad unless it's in its own sector */ ++ printk("Scratch pad is not used for this flash part.\n"); ++ fInfo.flash_scratch_pad_length = 0; // no sp ++#else /* allow scratch pad to share a sector with another section such as PSI */ ++ fInfo.flash_scratch_pad_number_blk = 1; ++ fInfo.flash_scratch_pad_blk_offset = fInfo.flash_persistent_blk_offset - fInfo.flash_scratch_pad_length; ++#endif ++ } ++ else // on different blk ++ { ++ fInfo.flash_scratch_pad_number_blk = fInfo.flash_persistent_start_blk\ ++ - fInfo.flash_scratch_pad_start_blk; ++ // find out the offset in the start_blk ++ usedBlkSize = 0; ++ for (i = fInfo.flash_scratch_pad_start_blk; ++ i < (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk); i++) ++ usedBlkSize += flash_get_sector_size((byte) i); ++ fInfo.flash_scratch_pad_blk_offset = usedBlkSize - fInfo.flash_scratch_pad_length; ++ } ++ } ++ else ++ { ++ printk("No flash for scratch pad!\n"); ++ fInfo.flash_scratch_pad_length = 0; // no sp ++ } ++ ++#if defined(DEBUG_FLASH) ++ printk("fInfo.flash_scratch_pad_start_blk = %d\n", fInfo.flash_scratch_pad_start_blk); ++ printk("fInfo.flash_scratch_pad_number_blk = %d\n", fInfo.flash_scratch_pad_number_blk); ++ printk("fInfo.flash_scratch_pad_length = 0x%x\n", fInfo.flash_scratch_pad_length); ++ printk("fInfo.flash_scratch_pad_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_scratch_pad_blk_offset); ++ ++ printk("fInfo.flash_nvram_start_blk = %d\n", fInfo.flash_nvram_start_blk); ++ printk("fInfo.flash_nvram_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_nvram_blk_offset); ++ printk("fInfo.flash_nvram_number_blk = %d\n", fInfo.flash_nvram_number_blk); ++ ++ printk("psi startAddr = %x\n", startAddr+FLASH_BASE_ADDR_REG); ++ printk("fInfo.flash_persistent_start_blk = %d\n", fInfo.flash_persistent_start_blk); ++ printk("fInfo.flash_persistent_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_persistent_blk_offset); ++ printk("fInfo.flash_persistent_number_blk = %d\n", fInfo.flash_persistent_number_blk); ++#endif ++ ++} ++ ++ ++ ++/*********************************************************************** ++ * Function Name: kerSysFlashAddrInfoGet ++ * Description : Fills in a structure with information about the NVRAM ++ * and persistent storage sections of flash memory. ++ * Fro physmap.c to mount the fs vol. ++ * Returns : None. ++ ***********************************************************************/ ++void kerSysFlashAddrInfoGet(PFLASH_ADDR_INFO pflash_addr_info) ++{ ++ pflash_addr_info->flash_nvram_blk_offset = fInfo.flash_nvram_blk_offset; ++ pflash_addr_info->flash_nvram_length = fInfo.flash_nvram_length; ++ pflash_addr_info->flash_nvram_number_blk = fInfo.flash_nvram_number_blk; ++ pflash_addr_info->flash_nvram_start_blk = fInfo.flash_nvram_start_blk; ++ pflash_addr_info->flash_persistent_blk_offset = fInfo.flash_persistent_blk_offset; ++ pflash_addr_info->flash_persistent_length = fInfo.flash_persistent_length; ++ pflash_addr_info->flash_persistent_number_blk = fInfo.flash_persistent_number_blk; ++ pflash_addr_info->flash_persistent_start_blk = fInfo.flash_persistent_start_blk; ++} ++ ++ ++// get shared blks into *** pTempBuf *** which has to be released bye the caller! ++// return: if pTempBuf != NULL, poits to the data with the dataSize of the buffer ++// !NULL -- ok ++// NULL -- fail ++static char *getSharedBlks(int start_blk, int end_blk) ++{ ++ int i = 0; ++ int usedBlkSize = 0; ++ int sect_size = 0; ++ char *pTempBuf = NULL; ++ char *pBuf = NULL; ++ ++ for (i = start_blk; i < end_blk; i++) ++ usedBlkSize += flash_get_sector_size((byte) i); ++ ++#if defined(DEBUG_FLASH) ++ printk("usedBlkSize = %d\n", usedBlkSize); ++#endif ++ ++ if ((pTempBuf = (char *) retriedKmalloc(usedBlkSize)) == NULL) ++ { ++ printk("failed to allocate memory with size: %d\n", usedBlkSize); ++ return pTempBuf; ++ } ++ ++ pBuf = pTempBuf; ++ for (i = start_blk; i < end_blk; i++) ++ { ++ sect_size = flash_get_sector_size((byte) i); ++ ++#if defined(DEBUG_FLASH) ++ printk("i = %d, sect_size = %d, end_blk = %d\n", i, sect_size, end_blk); ++#endif ++ flash_read_buf((byte)i, 0, pBuf, sect_size); ++ pBuf += sect_size; ++ } ++ ++ return pTempBuf; ++} ++ ++ ++ ++// Set the pTempBuf to flash from start_blk to end_blk ++// return: ++// 0 -- ok ++// -1 -- fail ++static int setSharedBlks(int start_blk, int end_blk, char *pTempBuf) ++{ ++ int i = 0; ++ int sect_size = 0; ++ int sts = 0; ++ char *pBuf = pTempBuf; ++ ++ for (i = start_blk; i < end_blk; i++) ++ { ++ sect_size = flash_get_sector_size((byte) i); ++ flash_sector_erase_int(i); ++ if (flash_write_buf(i, 0, pBuf, sect_size) != sect_size) ++ { ++ printk("Error writing flash sector %d.", i); ++ sts = -1; ++ break; ++ } ++ pBuf += sect_size; ++ } ++ ++ return sts; ++} ++ ++ ++ ++/******************************************************************************* ++ * NVRAM functions ++ *******************************************************************************/ ++ ++// get nvram data ++// return: ++// 0 - ok ++// -1 - fail ++int kerSysNvRamGet(char *string, int strLen, int offset) ++{ ++ char *pBuf = NULL; ++ ++ if (!flashInitialized) ++ kerSysFlashInit(); ++ ++ if (strLen > FLASH45_LENGTH_NVRAM) ++ return -1; ++ ++ if ((pBuf = getSharedBlks(fInfo.flash_nvram_start_blk, ++ (fInfo.flash_nvram_start_blk + fInfo.flash_nvram_number_blk))) == NULL) ++ return -1; ++ ++ // get string off the memory buffer ++ memcpy(string, (pBuf + fInfo.flash_nvram_blk_offset + offset), strLen); ++ ++ retriedKfree(pBuf); ++ ++ return 0; ++} ++ ++ ++// set nvram ++// return: ++// 0 - ok ++// -1 - fail ++int kerSysNvRamSet(char *string, int strLen, int offset) ++{ ++ int sts = 0; ++ char *pBuf = NULL; ++ ++ if (strLen > FLASH45_LENGTH_NVRAM) ++ return -1; ++ ++ if ((pBuf = getSharedBlks(fInfo.flash_nvram_start_blk, ++ (fInfo.flash_nvram_start_blk + fInfo.flash_nvram_number_blk))) == NULL) ++ return -1; ++ ++ // set string to the memory buffer ++ memcpy((pBuf + fInfo.flash_nvram_blk_offset + offset), string, strLen); ++ ++ if (setSharedBlks(fInfo.flash_nvram_start_blk, ++ (fInfo.flash_nvram_number_blk + fInfo.flash_nvram_start_blk), pBuf) != 0) ++ sts = -1; ++ ++ retriedKfree(pBuf); ++ ++ return sts; ++} ++ ++ ++/*********************************************************************** ++ * Function Name: kerSysEraseNvRam ++ * Description : Erase the NVRAM storage section of flash memory. ++ * Returns : 1 -- ok, 0 -- fail ++ ***********************************************************************/ ++int kerSysEraseNvRam(void) ++{ ++ int sts = 1; ++ char *tempStorage = retriedKmalloc(FLASH45_LENGTH_NVRAM); ++ ++ // just write the whole buf with '0xff' to the flash ++ if (!tempStorage) ++ sts = 0; ++ else ++ { ++ memset(tempStorage, 0xff, FLASH45_LENGTH_NVRAM); ++ if (kerSysNvRamSet(tempStorage, FLASH45_LENGTH_NVRAM, 0) != 0) ++ sts = 0; ++ retriedKfree(tempStorage); ++ } ++ ++ return sts; ++} ++ ++ ++/******************************************************************************* ++ * PSI functions ++ *******************************************************************************/ ++// get psi data ++// return: ++// 0 - ok ++// -1 - fail ++int kerSysPersistentGet(char *string, int strLen, int offset) ++{ ++ char *pBuf = NULL; ++ ++ if (strLen > fInfo.flash_persistent_length) ++ return -1; ++ ++ if ((pBuf = getSharedBlks(fInfo.flash_persistent_start_blk, ++ (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk))) == NULL) ++ return -1; ++ ++ // get string off the memory buffer ++ memcpy(string, (pBuf + fInfo.flash_persistent_blk_offset + offset), strLen); ++ ++ retriedKfree(pBuf); ++ ++ return 0; ++} ++ ++ ++// set psi ++// return: ++// 0 - ok ++// -1 - fail ++int kerSysPersistentSet(char *string, int strLen, int offset) ++{ ++ int sts = 0; ++ char *pBuf = NULL; ++ ++ if (strLen > fInfo.flash_persistent_length) ++ return -1; ++ ++ if ((pBuf = getSharedBlks(fInfo.flash_persistent_start_blk, ++ (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk))) == NULL) ++ return -1; ++ ++ // set string to the memory buffer ++ memcpy((pBuf + fInfo.flash_persistent_blk_offset + offset), string, strLen); ++ ++ if (setSharedBlks(fInfo.flash_persistent_start_blk, ++ (fInfo.flash_persistent_number_blk + fInfo.flash_persistent_start_blk), pBuf) != 0) ++ sts = -1; ++ ++ retriedKfree(pBuf); ++ ++ return sts; ++} ++ ++ ++// flash bcm image ++// return: ++// 0 - ok ++// !0 - the sector number fail to be flashed (should not be 0) ++int kerSysBcmImageSet( int flash_start_addr, char *string, int size) ++{ ++ int sts; ++ int sect_size; ++ int blk_start; ++ int i; ++ char *pTempBuf = NULL; ++ int whole_image = 0; ++ ++ blk_start = flash_get_blk(flash_start_addr); ++ if( blk_start < 0 ) ++ return( -1 ); ++ ++ if (flash_start_addr == FLASH_BASE && size > FLASH45_LENGTH_BOOT_ROM) ++ whole_image = 1; ++ ++ /* write image to flash memory */ ++ do ++ { ++ sect_size = flash_get_sector_size(blk_start); ++// NOTE: for memory problem in multiple PVC configuration, temporary get rid of kmalloc this 64K for now. ++// if ((pTempBuf = (char *)retriedKmalloc(sect_size)) == NULL) ++// { ++// printk("Failed to allocate memory with size: %d. Reset the router...\n", sect_size); ++// kerSysMipsSoftReset(); // reset the board right away. ++// } ++ // for whole image, no check on psi ++ if (!whole_image && blk_start == fInfo.flash_persistent_start_blk) // share the blk with psi ++ { ++ if (size > (sect_size - fInfo.flash_persistent_length)) ++ { ++ printk("Image is too big\n"); ++ break; // image is too big. Can not overwrite to nvram ++ } ++ if ((pTempBuf = (char *)retriedKmalloc(sect_size)) == NULL) ++ { ++ printk("Failed to allocate memory with size: %d. Reset the router...\n", sect_size); ++ kerSysMipsSoftReset(); // reset the board right away. ++ } ++ flash_read_buf((byte)blk_start, 0, pTempBuf, sect_size); ++ if (copy_from_user((void *)pTempBuf,(void *)string, size) != 0) ++ break; // failed ? ++ flash_sector_erase_int(blk_start); // erase blk before flash ++ if (flash_write_buf(blk_start, 0, pTempBuf, sect_size) == sect_size) ++ size = 0; // break out and say all is ok ++ retriedKfree(pTempBuf); ++ break; ++ } ++ ++ flash_sector_erase_int(blk_start); // erase blk before flash ++ ++ if (sect_size > size) ++ { ++ if (size & 1) ++ size++; ++ sect_size = size; ++ } ++ ++ if ((i = flash_write_buf(blk_start, 0, string, sect_size)) != sect_size) { ++ break; ++ } ++ blk_start++; ++ string += sect_size; ++ size -= sect_size; ++ } while (size > 0); ++ ++ if (whole_image) ++ { ++ // If flashing a whole image, erase to end of flash. ++ int total_blks = flash_get_numsectors(); ++ while( blk_start < total_blks ) ++ { ++ flash_sector_erase_int(blk_start); ++ blk_start++; ++ } ++ } ++ if (pTempBuf) ++ retriedKfree(pTempBuf); ++ ++ if( size == 0 ) ++ sts = 0; // ok ++ else ++ sts = blk_start; // failed to flash this sector ++ ++ return sts; ++} ++ ++/******************************************************************************* ++ * SP functions ++ *******************************************************************************/ ++// get sp data. NOTE: memcpy work here -- not using copy_from/to_user ++// return: ++// 0 - ok ++// -1 - fail ++int kerSysScratchPadGet(char *tokenId, char *tokBuf, int bufLen) ++{ ++ PSP_HEADER pHead = NULL; ++ PSP_TOKEN pToken = NULL; ++ char *pBuf = NULL; ++ char *pShareBuf = NULL; ++ char *startPtr = NULL; ++ char *endPtr = NULL; ++ char *spEndPtr = NULL; ++ int sts = -1; ++ ++ if (fInfo.flash_scratch_pad_length == 0) ++ return sts; ++ ++ if (bufLen >= (fInfo.flash_scratch_pad_length - sizeof(SP_HEADER) - sizeof(SP_TOKEN))) ++ { ++ printk("Exceed scratch pad space by %d\n", bufLen - fInfo.flash_scratch_pad_length \ ++ - sizeof(SP_HEADER) - sizeof(SP_TOKEN)); ++ return sts; ++ } ++ ++ if ((pShareBuf = getSharedBlks(fInfo.flash_scratch_pad_start_blk, ++ (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk))) == NULL) ++ return sts; ++ ++ // pBuf points to SP buf ++ pBuf = pShareBuf + fInfo.flash_scratch_pad_blk_offset; ++ ++ pHead = (PSP_HEADER) pBuf; ++ if (memcmp(pHead->SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN) != 0) ++ { ++ printk("Scrap pad is not initialized.\n"); ++ return sts; ++ } ++ ++ // search up to SPUsedLen for the token ++ startPtr = pBuf + sizeof(SP_HEADER); ++ endPtr = pBuf + pHead->SPUsedLen; ++ spEndPtr = pBuf + SP_MAX_LEN; ++ while (startPtr < endPtr && startPtr < spEndPtr) ++ { ++ pToken = (PSP_TOKEN) startPtr; ++ if (strncmp(pToken->tokenName, tokenId, TOKEN_NAME_LEN) == 0) ++ { ++ memcpy(tokBuf, startPtr + sizeof(SP_TOKEN), bufLen); ++ sts = 0; ++ break; ++ } ++ // get next token ++ startPtr += sizeof(SP_TOKEN) + pToken->tokenLen; ++ } ++ ++ retriedKfree(pShareBuf); ++ ++ return sts; ++} ++ ++ ++// set sp. NOTE: memcpy work here -- not using copy_from/to_user ++// return: ++// 0 - ok ++// -1 - fail ++int kerSysScratchPadSet(char *tokenId, char *tokBuf, int bufLen) ++{ ++ PSP_TOKEN pToken = NULL; ++ PSP_HEADER pHead = NULL; ++ char *pShareBuf = NULL; ++ char *pBuf = NULL; ++ SP_HEADER SPHead; ++ SP_TOKEN SPToken; ++ char *curPtr; ++ int sts = -1; ++ ++ if (fInfo.flash_scratch_pad_length == 0) ++ return sts; ++ ++ if (bufLen >= (fInfo.flash_scratch_pad_length - sizeof(SP_HEADER) - sizeof(SP_TOKEN))) ++ { ++ printk("Exceed scratch pad space by %d\n", bufLen - fInfo.flash_scratch_pad_length \ ++ - sizeof(SP_HEADER) - sizeof(SP_TOKEN)); ++ return sts; ++ } ++ ++ if ((pShareBuf = getSharedBlks(fInfo.flash_scratch_pad_start_blk, ++ (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk))) == NULL) ++ return sts; ++ ++ // pBuf points to SP buf ++ pBuf = pShareBuf + fInfo.flash_scratch_pad_blk_offset; ++ pHead = (PSP_HEADER) pBuf; ++ ++ // form header info. SPUsedLen later on... ++ memset((char *)&SPHead, 0, sizeof(SP_HEADER)); ++ memcpy(SPHead.SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN); ++ SPHead.SPVersion = SP_VERSION; ++ ++ // form token info. ++ memset((char*)&SPToken, 0, sizeof(SP_TOKEN)); ++ strncpy(SPToken.tokenName, tokenId, TOKEN_NAME_LEN - 1); ++ SPToken.tokenLen = bufLen; ++ if (memcmp(pHead->SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN) != 0) ++ { ++ // new sp, so just flash the token ++ printk("No Scrap pad found. Initialize scratch pad...\n"); ++ SPHead.SPUsedLen = sizeof(SP_HEADER) + sizeof(SP_TOKEN) + bufLen; ++ memcpy(pBuf, (char *)&SPHead, sizeof(SP_HEADER)); ++ curPtr = pBuf + sizeof(SP_HEADER); ++ memcpy(curPtr, (char *)&SPToken, sizeof(SP_TOKEN)); ++ curPtr += sizeof(SP_TOKEN); ++ memcpy(curPtr, tokBuf, bufLen); ++ } ++ else ++ { ++ // need search for the token, if exist with same size overwrite it. if sizes differ, ++ // move over the later token data over and put the new one at the end ++ char *endPtr = pBuf + pHead->SPUsedLen; ++ char *spEndPtr = pBuf + SP_MAX_LEN; ++ curPtr = pBuf + sizeof(SP_HEADER); ++ while (curPtr < endPtr && curPtr < spEndPtr) ++ { ++ pToken = (PSP_TOKEN) curPtr; ++ if (strncmp(pToken->tokenName, tokenId, TOKEN_NAME_LEN) == 0) ++ { ++ if (pToken->tokenLen == bufLen) // overwirte it ++ { ++ memcpy((curPtr+sizeof(SP_TOKEN)), tokBuf, bufLen); ++ break; ++ } ++ else // move later data over and put the new token at the end ++ { ++ memcpy((curPtr+sizeof(SP_TOKEN)), tokBuf, bufLen); // ~~~ ++ break; ++ } ++ } ++ else // not same token ~~~ ++ { ++ } ++ // get next token ++ curPtr += sizeof(SP_TOKEN) + pToken->tokenLen; ++ } // end while ++ SPHead.SPUsedLen = sizeof(SP_HEADER) + sizeof(SP_TOKEN) + bufLen; // ~~~ ++ if (SPHead.SPUsedLen > SP_MAX_LEN) ++ { ++ printk("No more Scratch pad space left! Over limit by %d bytes\n", SPHead.SPUsedLen - SP_MAX_LEN); ++ return sts; ++ } ++ ++ } // else if not new sp ++ ++ sts = setSharedBlks(fInfo.flash_scratch_pad_start_blk, ++ (fInfo.flash_scratch_pad_number_blk + fInfo.flash_scratch_pad_start_blk), pShareBuf); ++ ++ retriedKfree(pShareBuf); ++ ++ return sts; ++ ++ ++} ++ ++int kerSysFlashSizeGet(void) ++{ ++ return flash_get_total_size(); ++} ++ +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/bcm63xx_led.c linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/bcm63xx_led.c +--- linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/bcm63xx_led.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/bcm63xx_led.c 2006-07-07 22:16:32.000000000 +0200 +@@ -0,0 +1,582 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/*************************************************************************** ++ * File Name : bcm63xx_led.c ++ * ++ * Description: ++ * ++ * This file contains bcm963xx board led control API functions. ++ * ++ * To use it, do the following ++ * ++ * 1). define in the board.c the following led mappping (this is for 6345GW board): ++ * const LED_MAP_PAIR cLedMapping45GW[] = ++ * { // led name Initial state physical pin (ledMask) ++ * {kLedUsb, kLedStateOff, GPIO_LED_PIN_7}, ++ * {kLedAdsl, kLedStateOff, GPIO_LED_PIN_8}, ++ * {kLedPPP, kLedStateOff, GPIO_LED_PIN_9}, // PPP and WanData share PIN_9 ++ * {kLedWanData, kLedStateOff, GPIO_LED_PIN_9}, ++ * {kLedWireless, kLedStateOff, GPIO_LED_PIN_10}, ++ * {kLedEnd, kLedStateOff, 0 } // NOTE: kLedEnd has to be at the end. ++ * ++ * 2). };To initialize led API and initial state of the leds, call the following function with the mapping ++ * pointer from the above struct ++ * ++ * boardLedInit((PLED_MAP_PAIR) &cLedMapping45R); ++ * ++ * 3). Sample call for kernel mode: ++ * ++ * kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board.h ++ * ++ * 4). Sample call for user mode ++ * ++ * sysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board_api.h ++ * ++ * ++ * Created on : 10/28/2002 seanl ++ * ++ ***************************************************************************/ ++ ++/* Includes. */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#define k100ms (HZ / 10) // ~100 ms ++#define kFastBlinkCount 0 // ~100ms ++#define kSlowBlinkCount 5 // ~600ms ++ ++#define MAX_VIRT_LEDS 12 ++ ++// uncomment // for debug led ++//#define DEBUG_LED ++ ++// global variables: ++struct timer_list gLedTimer; ++int gTimerOn = FALSE; ++int gLedCount = 0; ++ ++typedef struct ledinfo ++{ ++ unsigned short ledMask; // mask for led: ie. giop 10 = 0x0400 ++ unsigned short ledActiveLow; // GPIO bit reset to turn on LED ++ unsigned short ledMaskFail; // mask for led: ie. giop 10 = 0x0400 ++ unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED ++ BOARD_LED_STATE ledState; // current led state ++ BOARD_LED_STATE savedLedState; // used in blink once for restore to the orignal ledState ++ int blinkCountDown; // if == 0, do blink (toggle). Is assgined value and dec by 1 at each timer. ++} LED_INFO, *PLED_INFO; ++ ++static PLED_INFO gLed = NULL; ++static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS]; ++static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS]; ++static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS]; ++ ++#if 0 /* BROKEN */ ++#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) ++static int gLedOffInBridgeMode = 1; ++#elif defined(CONFIG_BCM96345) ++static int gLedOffInBridgeMode = 0; ++#endif ++#endif ++ ++void ledTimerExpire(void); ++int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ); ++ ++//************************************************************************************** ++// LED operations ++//************************************************************************************** ++ ++// turn led on and set the ledState ++void ledOn(PLED_INFO pLed) ++{ ++ if( pLed->ledMask ) ++ { ++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one ++ if( pLed->ledActiveLow ) ++ GPIO->GPIOio &= ~pLed->ledMask; // turn on the led ++ else ++ GPIO->GPIOio |= pLed->ledMask; // turn on the led ++ pLed->ledState = pLed->savedLedState = kLedStateOn; ++ } ++} ++ ++ ++// turn led off and set the ledState ++void ledOff(PLED_INFO pLed) ++{ ++ if( pLed->ledMask ) ++ { ++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one ++ if( pLed->ledActiveLow ) ++ GPIO->GPIOio |= pLed->ledMask; // turn off the led ++ else ++ GPIO->GPIOio &= ~pLed->ledMask; // turn off the led ++ pLed->ledState = pLed->savedLedState = kLedStateOff; ++ } ++} ++ ++// turn led on and set the ledState ++void ledOnFail(PLED_INFO pLed) ++{ ++ if( pLed->ledMaskFail ) ++ { ++ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one ++ if( pLed->ledActiveLowFail ) ++ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn on the led ++ else ++ GPIO->GPIOio |= pLed->ledMaskFail; // turn on the led ++ pLed->ledState = pLed->savedLedState = kLedStateFail; ++ } ++} ++ ++ ++// turn led off and set the ledState ++void ledOffFail(PLED_INFO pLed) ++{ ++ if( pLed->ledMaskFail ) ++ { ++ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one ++ if( pLed->ledActiveLowFail ) ++ GPIO->GPIOio |= pLed->ledMaskFail; // turn off the led ++ else ++ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn off the led ++ pLed->ledState = pLed->savedLedState = kLedStateOff; ++ } ++} ++ ++ ++// toggle the led and return the current ledState ++BOARD_LED_STATE ledToggle(PLED_INFO pLed) ++{ ++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one ++ if (GPIO->GPIOio & pLed->ledMask) ++ { ++ GPIO->GPIOio &= ~(pLed->ledMask); ++ return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff ); ++ } ++ else ++ { ++ GPIO->GPIOio |= pLed->ledMask; ++ return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn ); ++ } ++} ++ ++ ++// led timer. Will return if timer is already on ++void ledTimerStart(void) ++{ ++ if (gTimerOn) ++ return; ++ ++#if defined(DEBUG_LED) ++ printk("led: add_timer\n"); ++#endif ++ ++ init_timer(&gLedTimer); ++ gLedTimer.function = (void*)ledTimerExpire; ++ gLedTimer.expires = jiffies + k100ms; // timer expires in ~100ms ++ add_timer (&gLedTimer); ++ gTimerOn = TRUE; ++} ++ ++ ++// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and ++// restart the timer according to ledState ++void ledTimerExpire(void) ++{ ++ int i; ++ PLED_INFO pCurLed; ++ ++ gTimerOn = FALSE; ++ ++ for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++) ++ { ++#if defined(DEBUG_LED) ++ printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown); ++#endif ++ switch (pCurLed->ledState) ++ { ++ case kLedStateOn: ++ case kLedStateOff: ++ case kLedStateFail: ++ pCurLed->blinkCountDown = 0; // reset the blink count down ++ break; ++ ++ case kLedStateBlinkOnce: ++ ledToggle(pCurLed); ++ pCurLed->blinkCountDown = 0; // reset to 0 ++ pCurLed->ledState = pCurLed->savedLedState; ++ if (pCurLed->ledState == kLedStateSlowBlinkContinues || ++ pCurLed->ledState == kLedStateFastBlinkContinues) ++ ledTimerStart(); // start timer if in blinkContinues stats ++ break; ++ ++ case kLedStateSlowBlinkContinues: ++ if (pCurLed->blinkCountDown-- == 0) ++ { ++ pCurLed->blinkCountDown = kSlowBlinkCount; ++ ledToggle(pCurLed); ++ } ++ ledTimerStart(); ++ break; ++ ++ case kLedStateFastBlinkContinues: ++ if (pCurLed->blinkCountDown-- == 0) ++ { ++ pCurLed->blinkCountDown = kFastBlinkCount; ++ ledToggle(pCurLed); ++ } ++ ledTimerStart(); ++ break; ++ ++ default: ++ printk("Invalid state = %d\n", pCurLed->ledState); ++ } ++ } ++} ++ ++// initialize the gLedCount and allocate and fill gLed struct ++void __init boardLedInit(PLED_MAP_PAIR cLedMapping) ++{ ++ PLED_MAP_PAIR p1, p2; ++ PLED_INFO pCurLed; ++ int needTimer = FALSE; ++ int alreadyUsed = 0; ++ ++#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) ++ /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */ ++ GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK; ++ GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS; ++#endif ++ ++ memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) ); ++ memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) ); ++ memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) ); ++ ++ gLedCount = 0; ++ ++ // Check for multiple LED names and multiple LED GPIO pins that share the ++ // same physical board LED. ++ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) ++ { ++ alreadyUsed = 0; ++ for( p2 = cLedMapping; p2 != p1; p2++ ) ++ { ++ if( (p1->ledMask && p1->ledMask == p2->ledMask) || ++ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) ++ { ++ alreadyUsed = 1; ++ break; ++ } ++ } ++ ++ if( alreadyUsed == 0 ) ++ gLedCount++; ++ } ++ ++ gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL); ++ if( gLed == NULL ) ++ { ++ printk( "LED memory allocation error.\n" ); ++ return; ++ } ++ ++ memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) ); ++ ++ // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led ++ // (ledMask) the first defined led's ledInitState will be used. ++ pCurLed = gLed; ++ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) ++ { ++ if( (int) p1->ledName > MAX_VIRT_LEDS ) ++ continue; ++ ++ alreadyUsed = 0; ++ for( p2 = cLedMapping; p2 != p1; p2++ ) ++ { ++ if( (p1->ledMask && p1->ledMask == p2->ledMask) || ++ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) ++ { ++ alreadyUsed = 1; ++ break; ++ } ++ } ++ ++ if( alreadyUsed == 0 ) ++ { ++ // Initialize the board LED for the first time. ++ needTimer = initLedInfo( p1, pCurLed ); ++ gpVirtLeds[(int) p1->ledName] = pCurLed; ++ pCurLed++; ++ } ++ else ++ { ++ PLED_INFO pLed; ++ for( pLed = gLed; pLed != pCurLed; pLed++ ) ++ { ++ // Find the LED_INFO structure that has already been initialized. ++ if((pLed->ledMask && pLed->ledMask == p1->ledMask) || ++ (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail)) ++ { ++ // The board LED has already been initialized but possibly ++ // not completely initialized. ++ if( p1->ledMask ) ++ { ++ pLed->ledMask = p1->ledMask; ++ pLed->ledActiveLow = p1->ledActiveLow; ++ } ++ if( p1->ledMaskFail ) ++ { ++ pLed->ledMaskFail = p1->ledMaskFail; ++ pLed->ledActiveLowFail = p1->ledActiveLowFail; ++ } ++ gpVirtLeds[(int) p1->ledName] = pLed; ++ break; ++ } ++ } ++ } ++ } ++ ++ if (needTimer) ++ ledTimerStart(); ++ ++#if defined(DEBUG_LED) ++ int i; ++ for (i=0; i < gLedCount; i++) ++ printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState); ++#endif ++ ++} ++ ++// Initialize a structure that contains information about a physical board LED ++// control. The board LED may contain more than one GPIO pin to control a ++// normal condition (green) or a failure condition (red). ++int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ) ++{ ++ int needTimer = FALSE; ++ pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState; ++ pCurLed->ledMask = pCurMap->ledMask; ++ pCurLed->ledActiveLow = pCurMap->ledActiveLow; ++ pCurLed->ledMaskFail = pCurMap->ledMaskFail; ++ pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail; ++ ++ switch (pCurLed->ledState) ++ { ++ case kLedStateOn: ++ pCurLed->blinkCountDown = 0; // reset the blink count down ++ ledOn(pCurLed); ++ break; ++ case kLedStateOff: ++ pCurLed->blinkCountDown = 0; // reset the blink count down ++ ledOff(pCurLed); ++ break; ++ case kLedStateFail: ++ pCurLed->blinkCountDown = 0; // reset the blink count down ++ ledOnFail(pCurLed); ++ break; ++ case kLedStateBlinkOnce: ++ pCurLed->blinkCountDown = 1; ++ needTimer = TRUE; ++ break; ++ case kLedStateSlowBlinkContinues: ++ pCurLed->blinkCountDown = kSlowBlinkCount; ++ needTimer = TRUE; ++ break; ++ case kLedStateFastBlinkContinues: ++ pCurLed->blinkCountDown = kFastBlinkCount; ++ needTimer = TRUE; ++ break; ++ default: ++ printk("Invalid state = %d\n", pCurLed->ledState); ++ } ++ ++ return( needTimer ); ++} ++ ++#if 0 /* BROKEN */ ++// Determines if there is at least one interface in bridge mode. Bridge mode ++// is determined by the cfm convention of naming bridge interfaces nas17 ++// through nas24. ++static int isBridgedProtocol(void) ++{ ++ extern int dev_get(const char *name); ++ const int firstBridgeId = 17; ++ const int lastBridgeId = 24; ++ int i; ++ int ret = FALSE; ++ char name[16]; ++ ++ for( i = firstBridgeId; i <= lastBridgeId; i++ ) ++ { ++ sprintf( name, "nas%d", i ); ++ ++ if( dev_get(name) ) ++ { ++ ret = TRUE; ++ break; ++ } ++ } ++ ++ return(ret); ++} ++#endif ++ ++// led ctrl. Maps the ledName to the corresponding ledInfoPtr and perform the led operation ++void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) ++{ ++ PLED_INFO ledInfoPtr; ++ ++ // do the mapping from virtual to physical led ++ if( (int) ledName < MAX_VIRT_LEDS ) ++ ledInfoPtr = gpVirtLeds[(int) ledName]; ++ else ++ ledInfoPtr = NULL; ++ ++ if (ledInfoPtr == NULL) ++ return; ++ ++ if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] ) ++ { ++ (*gLedHwFunc[(int) ledName]) (ledName, ledState); ++ ledOffFail(ledInfoPtr); ++ return; ++ } ++ else ++ if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] ) ++ { ++ (*gLedHwFailFunc[(int) ledName]) (ledName, ledState); ++ ledOff(ledInfoPtr); ++ return; ++ } ++ ++#if 0 /* BROKEN */ ++ // Do not blink the WAN Data LED if at least one interface is in bridge mode. ++ if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP)) ++ { ++ static int BridgedProtocol = -1; ++ ++ if( BridgedProtocol == -1 ) ++ BridgedProtocol = isBridgedProtocol(); ++ ++ if( BridgedProtocol == TRUE ) ++ return; ++ } ++#endif ++ ++ // If the state is kLedStateFail and there is not a failure LED defined ++ // in the board parameters, change the state to kLedStateFastBlinkContinues. ++ if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 ) ++ ledState = kLedStateFastBlinkContinues; ++ ++ switch (ledState) ++ { ++ case kLedStateOn: ++ // First, turn off the complimentary (failure) LED GPIO. ++ if( ledInfoPtr->ledMaskFail ) ++ ledOffFail(ledInfoPtr); ++ else ++ if( gLedHwFailFunc[(int) ledName] ) ++ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); ++ ++ // Next, turn on the specified LED GPIO. ++ ledOn(ledInfoPtr); ++ break; ++ ++ case kLedStateOff: ++ // First, turn off the complimentary (failure) LED GPIO. ++ if( ledInfoPtr->ledMaskFail ) ++ ledOffFail(ledInfoPtr); ++ else ++ if( gLedHwFailFunc[(int) ledName] ) ++ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); ++ ++ // Next, turn off the specified LED GPIO. ++ ledOff(ledInfoPtr); ++ break; ++ ++ case kLedStateFail: ++ // First, turn off the complimentary (normal) LED GPIO. ++ if( ledInfoPtr->ledMask ) ++ ledOff(ledInfoPtr); ++ else ++ if( gLedHwFunc[(int) ledName] ) ++ (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff); ++ ++ // Next, turn on (red) the specified LED GPIO. ++ ledOnFail(ledInfoPtr); ++ break; ++ ++ case kLedStateBlinkOnce: ++ // skip blinkOnce if it is already in Slow/Fast blink continues state ++ if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues || ++ ledInfoPtr->savedLedState == kLedStateFastBlinkContinues) ++ ; ++ else ++ { ++ if (ledInfoPtr->blinkCountDown == 0) // skip the call if it is 1 ++ { ++ ledToggle(ledInfoPtr); ++ ledInfoPtr->blinkCountDown = 1; // it will be reset to 0 when timer expires ++ ledInfoPtr->ledState = kLedStateBlinkOnce; ++ ledTimerStart(); ++ } ++ } ++ break; ++ ++ case kLedStateSlowBlinkContinues: ++ ledInfoPtr->blinkCountDown = kSlowBlinkCount; ++ ledInfoPtr->ledState = kLedStateSlowBlinkContinues; ++ ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues; ++ ledTimerStart(); ++ break; ++ ++ case kLedStateFastBlinkContinues: ++ ledInfoPtr->blinkCountDown = kFastBlinkCount; ++ ledInfoPtr->ledState = kLedStateFastBlinkContinues; ++ ledInfoPtr->savedLedState = kLedStateFastBlinkContinues; ++ ledTimerStart(); ++ break; ++ ++ default: ++ printk("Invalid led state\n"); ++ } ++} ++ ++// This function is called for an LED that is controlled by hardware. ++void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName, ++ HANDLE_LED_FUNC ledHwFunc, int ledFailType ) ++{ ++ if( (int) ledName < MAX_VIRT_LEDS ) ++ { ++ if( ledFailType == 1 ) ++ gLedHwFailFunc[(int) ledName] = ledHwFunc; ++ else ++ gLedHwFunc[(int) ledName] = ledHwFunc; ++ } ++} ++ +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/board.c linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/board.c +--- linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/board.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/board.c 2006-07-07 22:16:43.000000000 +0200 +@@ -0,0 +1,1614 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/*************************************************************************** ++ * File Name : board.c ++ * ++ * Description: This file contains Linux character device driver entry ++ * for the board related ioctl calls: flash, get free kernel ++ * page and dump kernel memory, etc. ++ * ++ * Created on : 2/20/2002 seanl: use cfiflash.c, cfliflash.h (AMD specific) ++ * ++ ***************************************************************************/ ++ ++ ++/* Includes. */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include "boardparms.h" ++#include "cfiflash.h" ++#include "bcm_intr.h" ++#include "board.h" ++#include "bcm_map_part.h" ++ ++/* Typedefs. */ ++#if defined (NON_CONSECUTIVE_MAC) ++// used to be the last octet. Now changed to the first 5 bits of the the forth octet ++// to reduced the duplicated MAC addresses. ++#define CHANGED_OCTET 3 ++#define SHIFT_BITS 3 ++#else ++#define CHANGED_OCTET 1 ++#define SHIFT_BITS 0 ++#endif ++ ++#if defined (WIRELESS) ++#define SES_BTN_PRESSED 0x00000001 ++#define SES_EVENTS SES_BTN_PRESSED /*OR all values if any*/ ++#define SES_LED_OFF 0 ++#define SES_LED_ON 1 ++#define SES_LED_BLINK 2 ++#endif ++ ++typedef struct ++{ ++ unsigned long ulId; ++ char chInUse; ++ char chReserved[3]; ++} MAC_ADDR_INFO, *PMAC_ADDR_INFO; ++ ++typedef struct ++{ ++ unsigned long ulSdramSize; ++ unsigned long ulPsiSize; ++ unsigned long ulNumMacAddrs; ++ unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; ++ MAC_ADDR_INFO MacAddrs[1]; ++} NVRAM_INFO, *PNVRAM_INFO; ++ ++typedef struct ++{ ++ unsigned long eventmask; ++} BOARD_IOC, *PBOARD_IOC; ++ ++ ++/*Dyinggasp callback*/ ++typedef void (*cb_dgasp_t)(void *arg); ++typedef struct _CB_DGASP__LIST ++{ ++ struct list_head list; ++ char name[IFNAMSIZ]; ++ cb_dgasp_t cb_dgasp_fn; ++ void *context; ++}CB_DGASP_LIST , *PCB_DGASP_LIST; ++ ++ ++static LED_MAP_PAIR LedMapping[] = ++{ // led name Initial state physical pin (ledMask) ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0} // NOTE: kLedEnd has to be at the end. ++}; ++ ++/* Externs. */ ++extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed); ++extern unsigned int nr_free_pages (void); ++extern const char *get_system_type(void); ++extern void kerSysFlashInit(void); ++extern unsigned long get_nvram_start_addr(void); ++extern unsigned long get_scratch_pad_start_addr(void); ++extern unsigned long getMemorySize(void); ++extern void __init boardLedInit(PLED_MAP_PAIR); ++extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); ++extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName, ++ HANDLE_LED_FUNC ledHwFunc, int ledFailType ); ++ ++/* Prototypes. */ ++void __init InitNvramInfo( void ); ++static int board_open( struct inode *inode, struct file *filp ); ++static int board_ioctl( struct inode *inode, struct file *flip, unsigned int command, unsigned long arg ); ++static ssize_t board_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos); ++static unsigned int board_poll(struct file *filp, struct poll_table_struct *wait); ++static int board_release(struct inode *inode, struct file *filp); ++ ++static BOARD_IOC* borad_ioc_alloc(void); ++static void borad_ioc_free(BOARD_IOC* board_ioc); ++ ++/* DyingGasp function prototype */ ++static void __init kerSysDyingGaspMapIntr(void); ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) ++static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs); ++#else ++static unsigned int kerSysDyingGaspIsr(void); ++#endif ++static void __init kerSysInitDyingGaspHandler( void ); ++static void __exit kerSysDeinitDyingGaspHandler( void ); ++/* -DyingGasp function prototype - */ ++ ++ ++#if defined (WIRELESS) ++static irqreturn_t sesBtn_isr(int irq, void *dev_id, struct pt_regs *ptregs); ++static void __init sesBtn_mapGpio(void); ++static void __init sesBtn_mapIntr(int context); ++static unsigned int sesBtn_poll(struct file *file, struct poll_table_struct *wait); ++static ssize_t sesBtn_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos); ++static void __init sesLed_mapGpio(void); ++static void sesLed_ctrl(int action); ++static void __init ses_board_init(void); ++static void __exit ses_board_deinit(void); ++#endif ++ ++static PNVRAM_INFO g_pNvramInfo = NULL; ++static int g_ledInitialized = 0; ++static wait_queue_head_t g_board_wait_queue; ++static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL; ++ ++static int g_wakeup_monitor = 0; ++static struct file *g_monitor_file = NULL; ++static struct task_struct *g_monitor_task = NULL; ++static unsigned int (*g_orig_fop_poll) ++ (struct file *, struct poll_table_struct *) = NULL; ++ ++static struct file_operations board_fops = ++{ ++ open: board_open, ++ ioctl: board_ioctl, ++ poll: board_poll, ++ read: board_read, ++ release: board_release, ++}; ++ ++uint32 board_major = 0; ++ ++#if defined (WIRELESS) ++static unsigned short sesBtn_irq = BP_NOT_DEFINED; ++static unsigned short sesBtn_gpio = BP_NOT_DEFINED; ++static unsigned short sesLed_gpio = BP_NOT_DEFINED; ++#endif ++ ++#if defined(MODULE) ++int init_module(void) ++{ ++ return( brcm_board_init() ); ++} ++ ++void cleanup_module(void) ++{ ++ if (MOD_IN_USE) ++ printk("brcm flash: cleanup_module failed because module is in use\n"); ++ else ++ brcm_board_cleanup(); ++} ++#endif //MODULE ++ ++ ++ ++static int __init brcm_board_init( void ) ++{ ++ typedef int (*BP_LED_FUNC) (unsigned short *); ++ static struct BpLedInformation ++ { ++ BOARD_LED_NAME ledName; ++ BP_LED_FUNC bpFunc; ++ BP_LED_FUNC bpFuncFail; ++ } bpLedInfo[] = ++ {{kLedAdsl, BpGetAdslLedGpio, BpGetAdslFailLedGpio}, ++ {kLedWireless, BpGetWirelessLedGpio, NULL}, ++ {kLedUsb, BpGetUsbLedGpio, NULL}, ++ {kLedHpna, BpGetHpnaLedGpio, NULL}, ++ {kLedWanData, BpGetWanDataLedGpio, NULL}, ++ {kLedPPP, BpGetPppLedGpio, BpGetPppFailLedGpio}, ++ {kLedVoip, BpGetVoipLedGpio, NULL}, ++ {kLedSes, BpGetWirelessSesLedGpio, NULL}, ++ {kLedEnd, NULL, NULL} ++ }; ++ ++ int ret; ++ ++ ret = register_chrdev(BOARD_DRV_MAJOR, "bcrmboard", &board_fops ); ++ if (ret < 0) ++ printk( "brcm_board_init(major %d): fail to register device.\n",BOARD_DRV_MAJOR); ++ else ++ { ++ PLED_MAP_PAIR pLedMap = LedMapping; ++ unsigned short gpio; ++ struct BpLedInformation *pInfo; ++ ++ printk("brcmboard: brcm_board_init entry\n"); ++ board_major = BOARD_DRV_MAJOR; ++ InitNvramInfo(); ++ ++ for( pInfo = bpLedInfo; pInfo->ledName != kLedEnd; pInfo++ ) ++ { ++ if( pInfo->bpFunc && (*pInfo->bpFunc) (&gpio) == BP_SUCCESS ) ++ { ++ pLedMap->ledName = pInfo->ledName; ++ pLedMap->ledMask = GPIO_NUM_TO_MASK(gpio); ++ pLedMap->ledActiveLow = (gpio & BP_ACTIVE_LOW) ? 1 : 0; ++ } ++ if( pInfo->bpFuncFail && (*pInfo->bpFuncFail) (&gpio) == BP_SUCCESS ) ++ { ++ pLedMap->ledName = pInfo->ledName; ++ pLedMap->ledMaskFail = GPIO_NUM_TO_MASK(gpio); ++ pLedMap->ledActiveLowFail = (gpio & BP_ACTIVE_LOW) ? 1 : 0; ++ } ++ if( pLedMap->ledName != kLedEnd ) ++ pLedMap++; ++ } ++ ++ init_waitqueue_head(&g_board_wait_queue); ++#if defined (WIRELESS) ++ ses_board_init(); ++#endif ++ kerSysInitDyingGaspHandler(); ++ kerSysDyingGaspMapIntr(); ++ ++ boardLedInit(LedMapping); ++ g_ledInitialized = 1; ++ } ++ ++ return ret; ++} ++ ++void __init InitNvramInfo( void ) ++{ ++ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); ++ unsigned long ulNumMacAddrs = pNvramData->ulNumMacAddrs; ++ ++ if( ulNumMacAddrs > 0 && ulNumMacAddrs <= NVRAM_MAC_COUNT_MAX ) ++ { ++ unsigned long ulNvramInfoSize = ++ sizeof(NVRAM_INFO) + ((sizeof(MAC_ADDR_INFO) - 1) * ulNumMacAddrs); ++ ++ g_pNvramInfo = (PNVRAM_INFO) kmalloc( ulNvramInfoSize, GFP_KERNEL ); ++ ++ if( g_pNvramInfo ) ++ { ++ unsigned long ulPsiSize; ++ if( BpGetPsiSize( &ulPsiSize ) != BP_SUCCESS ) ++ ulPsiSize = NVRAM_PSI_DEFAULT; ++ memset( g_pNvramInfo, 0x00, ulNvramInfoSize ); ++ g_pNvramInfo->ulPsiSize = ulPsiSize * 1024; ++ g_pNvramInfo->ulNumMacAddrs = pNvramData->ulNumMacAddrs; ++ memcpy( g_pNvramInfo->ucaBaseMacAddr, pNvramData->ucaBaseMacAddr, ++ NVRAM_MAC_ADDRESS_LEN ); ++ g_pNvramInfo->ulSdramSize = getMemorySize(); ++ } ++ else ++ printk("ERROR - Could not allocate memory for NVRAM data\n"); ++ } ++ else ++ printk("ERROR - Invalid number of MAC addresses (%ld) is configured.\n", ++ ulNumMacAddrs); ++} ++ ++void __exit brcm_board_cleanup( void ) ++{ ++ printk("brcm_board_cleanup()\n"); ++ ++ if (board_major != -1) ++ { ++#if defined (WIRELESS) ++ ses_board_deinit(); ++#endif ++ kerSysDeinitDyingGaspHandler(); ++ unregister_chrdev(board_major, "board_ioctl"); ++ } ++} ++ ++static BOARD_IOC* borad_ioc_alloc(void) ++{ ++ BOARD_IOC *board_ioc =NULL; ++ board_ioc = (BOARD_IOC*) kmalloc( sizeof(BOARD_IOC) , GFP_KERNEL ); ++ if(board_ioc) ++ { ++ memset(board_ioc, 0, sizeof(BOARD_IOC)); ++ } ++ return board_ioc; ++} ++ ++static void borad_ioc_free(BOARD_IOC* board_ioc) ++{ ++ if(board_ioc) ++ { ++ kfree(board_ioc); ++ } ++} ++ ++ ++static int board_open( struct inode *inode, struct file *filp ) ++{ ++ filp->private_data = borad_ioc_alloc(); ++ ++ if (filp->private_data == NULL) ++ return -ENOMEM; ++ ++ return( 0 ); ++} ++ ++static int board_release(struct inode *inode, struct file *filp) ++{ ++ BOARD_IOC *board_ioc = filp->private_data; ++ ++ wait_event_interruptible(g_board_wait_queue, 1); ++ borad_ioc_free(board_ioc); ++ ++ return( 0 ); ++} ++ ++ ++static unsigned int board_poll(struct file *filp, struct poll_table_struct *wait) ++{ ++ unsigned int mask = 0; ++#if defined (WIRELESS) ++ BOARD_IOC *board_ioc = filp->private_data; ++#endif ++ ++ poll_wait(filp, &g_board_wait_queue, wait); ++#if defined (WIRELESS) ++ if(board_ioc->eventmask & SES_EVENTS){ ++ mask |= sesBtn_poll(filp, wait); ++ } ++#endif ++ ++ return mask; ++} ++ ++ ++static ssize_t board_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos) ++{ ++#if defined (WIRELESS) ++ BOARD_IOC *board_ioc = filp->private_data; ++ if(board_ioc->eventmask & SES_EVENTS){ ++ return sesBtn_read(filp, buffer, count, ppos); ++ } ++#endif ++ return 0; ++} ++ ++//************************************************************************************** ++// Utitlities for dump memory, free kernel pages, mips soft reset, etc. ++//************************************************************************************** ++ ++/*********************************************************************** ++ * Function Name: dumpaddr ++ * Description : Display a hex dump of the specified address. ++ ***********************************************************************/ ++void dumpaddr( unsigned char *pAddr, int nLen ) ++{ ++ static char szHexChars[] = "0123456789abcdef"; ++ char szLine[80]; ++ char *p = szLine; ++ unsigned char ch, *q; ++ int i, j; ++ unsigned long ul; ++ ++ while( nLen > 0 ) ++ { ++ sprintf( szLine, "%8.8lx: ", (unsigned long) pAddr ); ++ p = szLine + strlen(szLine); ++ ++ for(i = 0; i < 16 && nLen > 0; i += sizeof(long), nLen -= sizeof(long)) ++ { ++ ul = *(unsigned long *) &pAddr[i]; ++ q = (unsigned char *) &ul; ++ for( j = 0; j < sizeof(long); j++ ) ++ { ++ *p++ = szHexChars[q[j] >> 4]; ++ *p++ = szHexChars[q[j] & 0x0f]; ++ *p++ = ' '; ++ } ++ } ++ ++ for( j = 0; j < 16 - i; j++ ) ++ *p++ = ' ', *p++ = ' ', *p++ = ' '; ++ ++ *p++ = ' ', *p++ = ' ', *p++ = ' '; ++ ++ for( j = 0; j < i; j++ ) ++ { ++ ch = pAddr[j]; ++ *p++ = (ch > ' ' && ch < '~') ? ch : '.'; ++ } ++ ++ *p++ = '\0'; ++ printk( "%s\r\n", szLine ); ++ ++ pAddr += i; ++ } ++ printk( "\r\n" ); ++} /* dumpaddr */ ++ ++ ++void kerSysMipsSoftReset(void) ++{ ++#if defined(CONFIG_BCM96348) ++ if (PERF->RevID == 0x634800A1) { ++ typedef void (*FNPTR) (void); ++ FNPTR bootaddr = (FNPTR) FLASH_BASE; ++ int i; ++ ++ /* Disable interrupts. */ ++ cli(); ++ ++ /* Reset all blocks. */ ++ PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS; ++ for( i = 0; i < 1000000; i++ ) ++ ; ++ PERF->BlockSoftReset |= BSR_ALL_BLOCKS; ++ /* Jump to the power on address. */ ++ (*bootaddr) (); ++ } ++ else ++ PERF->pll_control |= SOFT_RESET; // soft reset mips ++#else ++ PERF->pll_control |= SOFT_RESET; // soft reset mips ++#endif ++} ++ ++ ++int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId ) ++{ ++ int nRet = 0; ++ PMAC_ADDR_INFO pMai = NULL; ++ PMAC_ADDR_INFO pMaiFreeNoId = NULL; ++ PMAC_ADDR_INFO pMaiFreeId = NULL; ++ unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0; ++ ++ for( i = 0, pMai = g_pNvramInfo->MacAddrs; i < g_pNvramInfo->ulNumMacAddrs; ++ i++, pMai++ ) ++ { ++ if( ulId == pMai->ulId || ulId == MAC_ADDRESS_ANY ) ++ { ++ /* This MAC address has been used by the caller in the past. */ ++ memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr, ++ NVRAM_MAC_ADDRESS_LEN ); ++ shiftedIdx = i; ++ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS); ++ pMai->chInUse = 1; ++ pMaiFreeNoId = pMaiFreeId = NULL; ++ break; ++ } ++ else ++ if( pMai->chInUse == 0 ) ++ { ++ if( pMai->ulId == 0 && pMaiFreeNoId == NULL ) ++ { ++ /* This is an available MAC address that has never been ++ * used. ++ */ ++ pMaiFreeNoId = pMai; ++ ulIdxNoId = i; ++ } ++ else ++ if( pMai->ulId != 0 && pMaiFreeId == NULL ) ++ { ++ /* This is an available MAC address that has been used ++ * before. Use addresses that have never been used ++ * first, before using this one. ++ */ ++ pMaiFreeId = pMai; ++ ulIdxId = i; ++ } ++ } ++ } ++ ++ if( pMaiFreeNoId || pMaiFreeId ) ++ { ++ /* An available MAC address was found. */ ++ memcpy(pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,NVRAM_MAC_ADDRESS_LEN); ++ if( pMaiFreeNoId ) ++ { ++ shiftedIdx = ulIdxNoId; ++ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS); ++ pMaiFreeNoId->ulId = ulId; ++ pMaiFreeNoId->chInUse = 1; ++ } ++ else ++ { ++ shiftedIdx = ulIdxId; ++ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS); ++ pMaiFreeId->ulId = ulId; ++ pMaiFreeId->chInUse = 1; ++ } ++ } ++ else ++ if( i == g_pNvramInfo->ulNumMacAddrs ) ++ nRet = -EADDRNOTAVAIL; ++ ++ return( nRet ); ++} /* kerSysGetMacAddr */ ++ ++int kerSysReleaseMacAddress( unsigned char *pucaMacAddr ) ++{ ++ int nRet = -EINVAL; ++ unsigned long ulIdx = 0; ++ int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] - ++ g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]); ++ ++ // if overflow 255 (negitive), add 256 to have the correct index ++ if (idx < 0) ++ idx += 256; ++ ulIdx = (unsigned long) (idx >> SHIFT_BITS); ++ ++ if( ulIdx < g_pNvramInfo->ulNumMacAddrs ) ++ { ++ PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx]; ++ if( pMai->chInUse == 1 ) ++ { ++ pMai->chInUse = 0; ++ nRet = 0; ++ } ++ } ++ ++ return( nRet ); ++} /* kerSysReleaseMacAddr */ ++ ++int kerSysGetSdramSize( void ) ++{ ++ return( (int) g_pNvramInfo->ulSdramSize ); ++} /* kerSysGetSdramSize */ ++ ++ ++void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) ++{ ++ if (g_ledInitialized) ++ boardLedCtrl(ledName, ledState); ++} ++ ++unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t) ++{ ++ int mask = (*g_orig_fop_poll) (f, t); ++ ++ if( g_wakeup_monitor == 1 && g_monitor_file == f ) ++ { ++ /* If g_wakeup_monitor is non-0, the user mode application needs to ++ * return from a blocking select function. Return POLLPRI which will ++ * cause the select to return with the exception descriptor set. ++ */ ++ mask |= POLLPRI; ++ g_wakeup_monitor = 0; ++ } ++ ++ return( mask ); ++} ++ ++/* Put the user mode application that monitors link state on a run queue. */ ++void kerSysWakeupMonitorTask( void ) ++{ ++ g_wakeup_monitor = 1; ++ if( g_monitor_task ) ++ wake_up_process( g_monitor_task ); ++} ++ ++//<GPIOio; ++#endif ++#if defined(CONFIG_BCM96345) ++ unsigned short gpio_mask = GPIO_NUM_TO_MASK(gpio); ++ volatile unsigned short *gpio_reg = &GPIO->GPIOio; ++#endif ++#if defined(CONFIG_BCM96348) ++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(gpio); ++ volatile unsigned long *gpio_reg = &GPIO->GPIOio; ++ ++ if( (gpio & ~BP_ACTIVE_MASK) >= 32 ) ++ { ++ gpio_mask = GPIO_NUM_TO_MASK_HIGH(gpio); ++ gpio_reg = &GPIO->GPIOio_high; ++ } ++#endif ++ //printk("gpio=%04x,gpio_mask=%04x,gpio_reg=%04x\n",gpio,gpio_mask,*gpio_reg); ++ if(*gpio_reg & gpio_mask) //press down ++ return RESET_BUTTON_UP; ++ } ++ return RESET_BUTTON_PRESSDOWN; ++} ++//< FLASH45_LENGTH_BOOT_ROM ) ++ { ++ printk("Illegal CFE size [%d]. Size allowed: [%d]\n", ++ ctrlParms.strLen, FLASH45_LENGTH_BOOT_ROM); ++ ret = -1; ++ break; ++ } ++ ++ // save NVRAM data into a local structure ++ memcpy( &SaveNvramData, pNvramData, sizeof(NVRAM_DATA) ); ++ ++ // set memory type field ++ BpGetSdramSize( (unsigned long *) &ctrlParms.string[SDRAM_TYPE_ADDRESS_OFFSET] ); ++ ++ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen); ++ ++ // if nvram is not valid, restore the current nvram settings ++ if( BpSetBoardId( pNvramData->szBoardId ) != BP_SUCCESS && ++ *(unsigned long *) pNvramData == NVRAM_DATA_ID ) ++ { ++ kerSysNvRamSet((char *) &SaveNvramData, sizeof(SaveNvramData), 0); ++ } ++ break; ++ ++ case BCM_IMAGE_FS: ++ allowedSize = (int) flash_get_total_size() - \ ++ FLASH_RESERVED_AT_END - TAG_LEN - FLASH45_LENGTH_BOOT_ROM; ++ if( ctrlParms.strLen <= 0 || ctrlParms.strLen > allowedSize) ++ { ++ printk("Illegal root file system size [%d]. Size allowed: [%d]\n", ++ ctrlParms.strLen, allowedSize); ++ ret = -1; ++ break; ++ } ++ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen); ++ kerSysMipsSoftReset(); ++ break; ++ ++ case BCM_IMAGE_KERNEL: // not used for now. ++ break; ++ case BCM_IMAGE_WHOLE: ++ if(ctrlParms.strLen <= 0) ++ { ++ printk("Illegal flash image size [%d].\n", ctrlParms.strLen); ++ ret = -1; ++ break; ++ } ++ ++ // save NVRAM data into a local structure ++ memcpy( &SaveNvramData, pNvramData, sizeof(NVRAM_DATA) ); ++ ++ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen); ++ ++ // if nvram is not valid, restore the current nvram settings ++ if( BpSetBoardId( pNvramData->szBoardId ) != BP_SUCCESS && ++ *(unsigned long *) pNvramData == NVRAM_DATA_ID ) ++ { ++ kerSysNvRamSet((char *) &SaveNvramData, sizeof(SaveNvramData), 0); ++ } ++ ++ kerSysMipsSoftReset(); ++ break; ++ ++ default: ++ ret = -EINVAL; ++ printk("flash_ioctl_command: invalid command %d\n", ctrlParms.action); ++ break; ++ } ++ ctrlParms.result = ret; ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ } ++ else ++ ret = -EFAULT; ++ break; ++ ++ case BOARD_IOCTL_FLASH_READ: ++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) ++ { ++ switch (ctrlParms.action) ++ { ++ case SCRATCH_PAD: ++ ret = kerSysScratchPadGet(ctrlParms.string, ctrlParms.buf, ctrlParms.offset); ++ break; ++ ++ case PERSISTENT: ++ ret = kerSysPersistentGet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset); ++ break; ++ ++ case NVRAM: ++ ret = kerSysNvRamGet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset); ++ break; ++ ++ case FLASH_SIZE: ++ ret = kerSysFlashSizeGet(); ++ break; ++ ++ default: ++ ret = -EINVAL; ++ printk("Not supported. invalid command %d\n", ctrlParms.action); ++ break; ++ } ++ ctrlParms.result = ret; ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ } ++ else ++ ret = -EFAULT; ++ break; ++ ++ case BOARD_IOCTL_GET_NR_PAGES: ++ ctrlParms.result = nr_free_pages() + get_page_cache_size(); ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ break; ++ ++ case BOARD_IOCTL_DUMP_ADDR: ++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) ++ { ++ dumpaddr( (unsigned char *) ctrlParms.string, ctrlParms.strLen ); ++ ctrlParms.result = 0; ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ } ++ else ++ ret = -EFAULT; ++ break; ++ ++ case BOARD_IOCTL_SET_MEMORY: ++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) ++ { ++ unsigned long *pul = (unsigned long *) ctrlParms.string; ++ unsigned short *pus = (unsigned short *) ctrlParms.string; ++ unsigned char *puc = (unsigned char *) ctrlParms.string; ++ switch( ctrlParms.strLen ) ++ { ++ case 4: ++ *pul = (unsigned long) ctrlParms.offset; ++ break; ++ case 2: ++ *pus = (unsigned short) ctrlParms.offset; ++ break; ++ case 1: ++ *puc = (unsigned char) ctrlParms.offset; ++ break; ++ } ++ dumpaddr( (unsigned char *) ctrlParms.string, sizeof(long) ); ++ ctrlParms.result = 0; ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ } ++ else ++ ret = -EFAULT; ++ break; ++ ++ case BOARD_IOCTL_MIPS_SOFT_RESET: ++ kerSysMipsSoftReset(); ++ break; ++ ++ case BOARD_IOCTL_LED_CTRL: ++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) ++ { ++ kerSysLedCtrl((BOARD_LED_NAME)ctrlParms.strLen, (BOARD_LED_STATE)ctrlParms.offset); ++ ret = 0; ++ } ++ break; ++ ++ case BOARD_IOCTL_GET_ID: ++ if (copy_from_user((void*)&ctrlParms, (void*)arg, ++ sizeof(ctrlParms)) == 0) ++ { ++ if( ctrlParms.string ) ++ { ++ char *p = (char *) get_system_type(); ++ if( strlen(p) + 1 < ctrlParms.strLen ) ++ ctrlParms.strLen = strlen(p) + 1; ++ __copy_to_user(ctrlParms.string, p, ctrlParms.strLen); ++ } ++ ++ ctrlParms.result = 0; ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, ++ sizeof(BOARD_IOCTL_PARMS)); ++ } ++ break; ++ ++ case BOARD_IOCTL_GET_MAC_ADDRESS: ++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) ++ { ++ ctrlParms.result = kerSysGetMacAddress( ucaMacAddr, ++ ctrlParms.offset ); ++ ++ if( ctrlParms.result == 0 ) ++ { ++ __copy_to_user(ctrlParms.string, ucaMacAddr, ++ sizeof(ucaMacAddr)); ++ } ++ ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, ++ sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ } ++ else ++ ret = -EFAULT; ++ break; ++ ++ case BOARD_IOCTL_RELEASE_MAC_ADDRESS: ++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) ++ { ++ if (copy_from_user((void*)ucaMacAddr, (void*)ctrlParms.string, \ ++ NVRAM_MAC_ADDRESS_LEN) == 0) ++ { ++ ctrlParms.result = kerSysReleaseMacAddress( ucaMacAddr ); ++ } ++ else ++ { ++ ctrlParms.result = -EACCES; ++ } ++ ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, ++ sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ } ++ else ++ ret = -EFAULT; ++ break; ++ ++ case BOARD_IOCTL_GET_PSI_SIZE: ++ ctrlParms.result = (int) g_pNvramInfo->ulPsiSize; ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ break; ++ ++ case BOARD_IOCTL_GET_SDRAM_SIZE: ++ ctrlParms.result = (int) g_pNvramInfo->ulSdramSize; ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ break; ++ ++ case BOARD_IOCTL_GET_BASE_MAC_ADDRESS: ++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) ++ { ++ __copy_to_user(ctrlParms.string, g_pNvramInfo->ucaBaseMacAddr, NVRAM_MAC_ADDRESS_LEN); ++ ctrlParms.result = 0; ++ ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, ++ sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ } ++ else ++ ret = -EFAULT; ++ break; ++ ++ case BOARD_IOCTL_GET_CHIP_ID: ++ ctrlParms.result = (int) (PERF->RevID & 0xFFFF0000) >> 16; ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ break; ++ ++ case BOARD_IOCTL_GET_NUM_ENET: { ++ ETHERNET_MAC_INFO EnetInfos[BP_MAX_ENET_MACS]; ++ int i, numeth = 0; ++ if (BpGetEthernetMacInfo(EnetInfos, BP_MAX_ENET_MACS) == BP_SUCCESS) { ++ for( i = 0; i < BP_MAX_ENET_MACS; i++) { ++ if (EnetInfos[i].ucPhyType != BP_ENET_NO_PHY) { ++ numeth++; ++ } ++ } ++ ctrlParms.result = numeth; ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ } ++ else { ++ ret = -EFAULT; ++ } ++ break; ++ } ++ ++ case BOARD_IOCTL_GET_CFE_VER: ++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { ++ char *vertag = (char *)(FLASH_BASE + CFE_VERSION_OFFSET); ++ if (ctrlParms.strLen < CFE_VERSION_SIZE) { ++ ctrlParms.result = 0; ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ ret = -EFAULT; ++ } ++ else if (strncmp(vertag, "cfe-v", 5)) { // no tag info in flash ++ ctrlParms.result = 0; ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ } ++ else { ++ ctrlParms.result = 1; ++ __copy_to_user(ctrlParms.string, vertag+CFE_VERSION_MARK_SIZE, CFE_VERSION_SIZE); ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ } ++ } ++ else { ++ ret = -EFAULT; ++ } ++ break; ++ ++ case BOARD_IOCTL_GET_ENET_CFG: ++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { ++ ETHERNET_MAC_INFO EnetInfos[BP_MAX_ENET_MACS]; ++ if (BpGetEthernetMacInfo(EnetInfos, BP_MAX_ENET_MACS) == BP_SUCCESS) { ++ if (ctrlParms.strLen == sizeof(EnetInfos)) { ++ __copy_to_user(ctrlParms.string, EnetInfos, sizeof(EnetInfos)); ++ ctrlParms.result = 0; ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ } else ++ ret = -EFAULT; ++ } ++ else { ++ ret = -EFAULT; ++ } ++ break; ++ } ++ else { ++ ret = -EFAULT; ++ } ++ break; ++//<>JUNHON, 2004/09/15 ++ ++ ++#if defined (WIRELESS) ++ case BOARD_IOCTL_GET_WLAN_ANT_INUSE: ++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { ++ unsigned short antInUse = 0; ++ if (BpGetWirelessAntInUse(&antInUse) == BP_SUCCESS) { ++ if (ctrlParms.strLen == sizeof(antInUse)) { ++ __copy_to_user(ctrlParms.string, &antInUse, sizeof(antInUse)); ++ ctrlParms.result = 0; ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ } else ++ ret = -EFAULT; ++ } ++ else { ++ ret = -EFAULT; ++ } ++ break; ++ } ++ else { ++ ret = -EFAULT; ++ } ++ break; ++#endif ++ case BOARD_IOCTL_SET_TRIGGER_EVENT: ++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { ++ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data; ++ ctrlParms.result = -EFAULT; ++ ret = -EFAULT; ++ if (ctrlParms.strLen == sizeof(unsigned long)) { ++ board_ioc->eventmask |= *((int*)ctrlParms.string); ++#if defined (WIRELESS) ++ if((board_ioc->eventmask & SES_EVENTS)) { ++ if(sesBtn_irq != BP_NOT_DEFINED) { ++ BcmHalInterruptEnable(sesBtn_irq); ++ ctrlParms.result = 0; ++ ret = 0; ++ } ++ } ++#endif ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ } ++ break; ++ } ++ else { ++ ret = -EFAULT; ++ } ++ break; ++ ++ case BOARD_IOCTL_GET_TRIGGER_EVENT: ++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { ++ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data; ++ if (ctrlParms.strLen == sizeof(unsigned long)) { ++ __copy_to_user(ctrlParms.string, &board_ioc->eventmask, sizeof(unsigned long)); ++ ctrlParms.result = 0; ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ } else ++ ret = -EFAULT; ++ ++ break; ++ } ++ else { ++ ret = -EFAULT; ++ } ++ break; ++ ++ case BOARD_IOCTL_UNSET_TRIGGER_EVENT: ++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { ++ if (ctrlParms.strLen == sizeof(unsigned long)) { ++ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data; ++ board_ioc->eventmask &= (~(*((int*)ctrlParms.string))); ++ ctrlParms.result = 0; ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ } else ++ ret = -EFAULT; ++ ++ break; ++ } ++ else { ++ ret = -EFAULT; ++ } ++ break; ++#if defined (WIRELESS) ++ case BOARD_IOCTL_SET_SES_LED: ++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { ++ if (ctrlParms.strLen == sizeof(int)) { ++ sesLed_ctrl(*(int*)ctrlParms.string); ++ ctrlParms.result = 0; ++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); ++ ret = 0; ++ } else ++ ret = -EFAULT; ++ ++ break; ++ } ++ else { ++ ret = -EFAULT; ++ } ++ break; ++#endif ++ ++ case BOARD_IOCTL_SET_MONITOR_FD: ++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { ++ int fput_needed = 0; ++ ++ g_monitor_file = fget_light( ctrlParms.offset, &fput_needed ); ++ if( g_monitor_file ) { ++ /* Hook this file descriptor's poll function in order to set ++ * the exception descriptor when there is a change in link ++ * state. ++ */ ++ g_monitor_task = current; ++ g_orig_fop_poll = g_monitor_file->f_op->poll; ++ g_monitor_file->f_op->poll = kerSysMonitorPollHook; ++ } ++ } ++ break; ++ ++ case BOARD_IOCTL_WAKEUP_MONITOR_TASK: ++ kerSysWakeupMonitorTask(); ++ break; ++ ++ default: ++ ret = -EINVAL; ++ ctrlParms.result = 0; ++ printk("board_ioctl: invalid command %x, cmd %d .\n",command,_IOC_NR(command)); ++ break; ++ ++ } /* switch */ ++ ++ return (ret); ++ ++} /* board_ioctl */ ++ ++/*************************************************************************** ++ * SES Button ISR/GPIO/LED functions. ++ ***************************************************************************/ ++#if defined (WIRELESS) ++static irqreturn_t sesBtn_isr(int irq, void *dev_id, struct pt_regs *ptregs) ++{ ++#if defined(_BCM96338_) || defined(CONFIG_BCM96338) ++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); ++ volatile unsigned long *gpio_reg = &GPIO->GPIOio; ++#endif ++#if defined(_BCM96345_) || defined(CONFIG_BCM96345) ++ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); ++ volatile unsigned short *gpio_reg = &GPIO->GPIOio; ++#endif ++#if defined(_BCM96348_) || defined (CONFIG_BCM96348) ++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); ++ volatile unsigned long *gpio_reg = &GPIO->GPIOio; ++ ++ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 ) ++ { ++ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio); ++ gpio_reg = &GPIO->GPIOio_high; ++ } ++#endif ++ ++ if (!(*gpio_reg & gpio_mask)){ ++ wake_up_interruptible(&g_board_wait_queue); ++ return IRQ_RETVAL(1); ++ } else { ++ return IRQ_RETVAL(0); ++ } ++} ++ ++static void __init sesBtn_mapGpio() ++{ ++ if( BpGetWirelessSesBtnGpio(&sesBtn_gpio) == BP_SUCCESS ) ++ { ++ printk("SES: Button GPIO 0x%x is enabled\n", sesBtn_gpio); ++ } ++} ++ ++static void __init sesBtn_mapIntr(int context) ++{ ++ if( BpGetWirelessSesExtIntr(&sesBtn_irq) == BP_SUCCESS ) ++ { ++ printk("SES: Button Interrupt 0x%x is enabled\n", sesBtn_irq); ++ } ++ else ++ return; ++ ++ sesBtn_irq += INTERRUPT_ID_EXTERNAL_0; ++ ++ if (BcmHalMapInterrupt((FN_HANDLER)sesBtn_isr, context, sesBtn_irq)) { ++ printk("SES: Interrupt mapping failed\n"); ++ } ++ BcmHalInterruptEnable(sesBtn_irq); ++} ++ ++ ++static unsigned int sesBtn_poll(struct file *file, struct poll_table_struct *wait) ++{ ++#if defined(_BCM96338_) || defined(CONFIG_BCM96338) ++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); ++ volatile unsigned long *gpio_reg = &GPIO->GPIOio; ++#endif ++#if defined(_BCM96345_) || defined(CONFIG_BCM96345) ++ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); ++ volatile unsigned short *gpio_reg = &GPIO->GPIOio; ++#endif ++#if defined(_BCM96348_) || defined (CONFIG_BCM96348) ++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); ++ volatile unsigned long *gpio_reg = &GPIO->GPIOio; ++ ++ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 ) ++ { ++ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio); ++ gpio_reg = &GPIO->GPIOio_high; ++ } ++#endif ++ ++ if (!(*gpio_reg & gpio_mask)){ ++ return POLLIN; ++ } ++ return 0; ++} ++ ++static ssize_t sesBtn_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) ++{ ++ volatile unsigned int event=0; ++ ssize_t ret=0; ++ ++#if defined(_BCM96338_) || defined (CONFIG_BCM96338) ++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); ++ volatile unsigned long *gpio_reg = &GPIO->GPIOio; ++#endif ++#if defined(_BCM96345_) || defined (CONFIG_BCM96345) ++ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); ++ volatile unsigned short *gpio_reg = &GPIO->GPIOio; ++#endif ++#if defined(_BCM96348_) || defined (CONFIG_BCM96348) ++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); ++ volatile unsigned long *gpio_reg = &GPIO->GPIOio; ++ ++ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 ) ++ { ++ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio); ++ gpio_reg = &GPIO->GPIOio_high; ++ } ++#endif ++ ++ if(*gpio_reg & gpio_mask){ ++ BcmHalInterruptEnable(sesBtn_irq); ++ return ret; ++ } ++ event = SES_EVENTS; ++ __copy_to_user((char*)buffer, (char*)&event, sizeof(event)); ++ BcmHalInterruptEnable(sesBtn_irq); ++ count -= sizeof(event); ++ buffer += sizeof(event); ++ ret += sizeof(event); ++ return ret; ++} ++ ++static void __init sesLed_mapGpio() ++{ ++ if( BpGetWirelessSesBtnGpio(&sesLed_gpio) == BP_SUCCESS ) ++ { ++ printk("SES: LED GPIO 0x%x is enabled\n", sesBtn_gpio); ++ } ++} ++ ++static void sesLed_ctrl(int action) ++{ ++ ++ //char status = ((action >> 8) & 0xff); /* extract status */ ++ //char event = ((action >> 16) & 0xff); /* extract event */ ++ //char blinktype = ((action >> 24) & 0xff); /* extract blink type for SES_LED_BLINK */ ++ ++ BOARD_LED_STATE led; ++ ++ if(sesLed_gpio == BP_NOT_DEFINED) ++ return; ++ ++ action &= 0xff; /* extract led */ ++ ++ //printk("blinktype=%d, event=%d, status=%d\n",(int)blinktype, (int)event, (int)status); ++ ++ switch (action) ++ { ++ case SES_LED_ON: ++ //printk("SES: led on\n"); ++ led = kLedStateOn; ++ break; ++ case SES_LED_BLINK: ++ //printk("SES: led blink\n"); ++ led = kLedStateSlowBlinkContinues; ++ break; ++ case SES_LED_OFF: ++ default: ++ //printk("SES: led off\n"); ++ led = kLedStateOff; ++ } ++ ++ kerSysLedCtrl(kLedSes, led); ++} ++ ++static void __init ses_board_init() ++{ ++ sesBtn_mapGpio(); ++ sesBtn_mapIntr(0); ++ sesLed_mapGpio(); ++} ++static void __exit ses_board_deinit() ++{ ++ if(sesBtn_irq) ++ BcmHalInterruptDisable(sesBtn_irq); ++} ++#endif ++ ++/*************************************************************************** ++ * Dying gasp ISR and functions. ++ ***************************************************************************/ ++#define KERSYS_DBG printk ++ ++#if defined(CONFIG_BCM96345) ++#define CYCLE_PER_US 70 ++#elif defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) ++/* The BCM6348 cycles per microsecond is really variable since the BCM6348 ++ * MIPS speed can vary depending on the PLL settings. However, an appoximate ++ * value of 120 will still work OK for the test being done. ++ */ ++#define CYCLE_PER_US 120 ++#endif ++#define DG_GLITCH_TO (100*CYCLE_PER_US) ++ ++static void __init kerSysDyingGaspMapIntr() ++{ ++ unsigned long ulIntr; ++ ++#if defined(CONFIG_BCM96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(_BCM96338_) ++ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) { ++ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, INTERRUPT_ID_DG); ++ BcmHalInterruptEnable( INTERRUPT_ID_DG ); ++ } ++#elif defined(CONFIG_BCM96345) || defined(_BCM96345_) ++ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) { ++ ulIntr += INTERRUPT_ID_EXTERNAL_0; ++ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, ulIntr); ++ BcmHalInterruptEnable( ulIntr ); ++ } ++#endif ++ ++} ++ ++void kerSysSetWdTimer(ulong timeUs) ++{ ++ TIMER->WatchDogDefCount = timeUs * (FPERIPH/1000000); ++ TIMER->WatchDogCtl = 0xFF00; ++ TIMER->WatchDogCtl = 0x00FF; ++} ++ ++ulong kerSysGetCycleCount(void) ++{ ++ ulong cnt; ++#ifdef _WIN32_WCE ++ cnt = 0; ++#else ++ __asm volatile("mfc0 %0, $9":"=d"(cnt)); ++#endif ++ return(cnt); ++} ++ ++static Bool kerSysDyingGaspCheckPowerLoss(void) ++{ ++ ulong clk0; ++ ulong ulIntr; ++ ++ ulIntr = 0; ++ clk0 = kerSysGetCycleCount(); ++ ++ UART->Data = 'D'; ++ UART->Data = '%'; ++ UART->Data = 'G'; ++ ++#if defined(CONFIG_BCM96345) ++ BpGetAdslDyingGaspExtIntr( &ulIntr ); ++ ++ do { ++ ulong clk1; ++ ++ clk1 = kerSysGetCycleCount(); /* time cleared */ ++ /* wait a little to get new reading */ ++ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) ++ ; ++ } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); ++ ++ if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) { /* power glitch */ ++ BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0); ++ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); ++ return 0; ++ } ++#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS) ++ do { ++ ulong clk1; ++ ++ clk1 = kerSysGetCycleCount(); /* time cleared */ ++ /* wait a little to get new reading */ ++ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) ++ ; ++ } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); ++ ++ if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) { ++ BcmHalInterruptEnable( INTERRUPT_ID_DG ); ++ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); ++ return 0; ++ } ++#endif ++ return 1; ++} ++ ++static void kerSysDyingGaspShutdown( void ) ++{ ++ kerSysSetWdTimer(1000000); ++#if defined(CONFIG_BCM96345) ++ PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN); ++#elif defined(CONFIG_BCM96348) ++ PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN); ++#endif ++} ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) ++static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs) ++#else ++static unsigned int kerSysDyingGaspIsr(void) ++#endif ++{ ++ struct list_head *pos; ++ CB_DGASP_LIST *tmp, *dsl = NULL; ++ ++ if (kerSysDyingGaspCheckPowerLoss()) { ++ ++ /* first to turn off everything other than dsl */ ++ list_for_each(pos, &g_cb_dgasp_list_head->list) { ++ tmp = list_entry(pos, CB_DGASP_LIST, list); ++ if(strncmp(tmp->name, "dsl", 3)) { ++ (tmp->cb_dgasp_fn)(tmp->context); ++ }else { ++ dsl = tmp; ++ } ++ } ++ ++ /* now send dgasp */ ++ if(dsl) ++ (dsl->cb_dgasp_fn)(dsl->context); ++ ++ /* reset and shutdown system */ ++ kerSysDyingGaspShutdown(); ++ } ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) ++return( IRQ_HANDLED ); ++#else ++ return( 1 ); ++#endif ++} ++ ++static void __init kerSysInitDyingGaspHandler( void ) ++{ ++ CB_DGASP_LIST *new_node; ++ ++ if( g_cb_dgasp_list_head != NULL) { ++ printk("Error: kerSysInitDyingGaspHandler: list head is not null\n"); ++ return; ++ } ++ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); ++ memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); ++ INIT_LIST_HEAD(&new_node->list); ++ g_cb_dgasp_list_head = new_node; ++ ++} /* kerSysInitDyingGaspHandler */ ++ ++static void __exit kerSysDeinitDyingGaspHandler( void ) ++{ ++ struct list_head *pos; ++ CB_DGASP_LIST *tmp; ++ ++ if(g_cb_dgasp_list_head == NULL) ++ return; ++ ++ list_for_each(pos, &g_cb_dgasp_list_head->list) { ++ tmp = list_entry(pos, CB_DGASP_LIST, list); ++ list_del(pos); ++ kfree(tmp); ++ } ++ ++ kfree(g_cb_dgasp_list_head); ++ g_cb_dgasp_list_head = NULL; ++ ++} /* kerSysDeinitDyingGaspHandler */ ++ ++void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context) ++{ ++ CB_DGASP_LIST *new_node; ++ ++ if( g_cb_dgasp_list_head == NULL) { ++ printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n"); ++ return; ++ } ++ ++ if( devname == NULL || cbfn == NULL ) { ++ printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context); ++ return; ++ } ++ ++ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); ++ memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); ++ INIT_LIST_HEAD(&new_node->list); ++ strncpy(new_node->name, devname, IFNAMSIZ); ++ new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn; ++ new_node->context = context; ++ list_add(&new_node->list, &g_cb_dgasp_list_head->list); ++ ++ printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname); ++ ++} /* kerSysRegisterDyingGaspHandler */ ++ ++void kerSysDeregisterDyingGaspHandler(char *devname) ++{ ++ struct list_head *pos; ++ CB_DGASP_LIST *tmp; ++ ++ if(g_cb_dgasp_list_head == NULL) { ++ printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n"); ++ return; ++ } ++ ++ if(devname == NULL) { ++ printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n"); ++ return; ++ } ++ ++ printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname); ++ ++ list_for_each(pos, &g_cb_dgasp_list_head->list) { ++ tmp = list_entry(pos, CB_DGASP_LIST, list); ++ if(!strcmp(tmp->name, devname)) { ++ list_del(pos); ++ kfree(tmp); ++ printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname); ++ return; ++ } ++ } ++ printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname); ++ ++} /* kerSysDeregisterDyingGaspHandler */ ++ ++/*************************************************************************** ++ * MACRO to call driver initialization and cleanup functions. ++ ***************************************************************************/ ++module_init( brcm_board_init ); ++module_exit( brcm_board_cleanup ); ++ ++EXPORT_SYMBOL(kerSysNvRamGet); ++EXPORT_SYMBOL(dumpaddr); ++EXPORT_SYMBOL(kerSysGetMacAddress); ++EXPORT_SYMBOL(kerSysReleaseMacAddress); ++EXPORT_SYMBOL(kerSysGetSdramSize); ++EXPORT_SYMBOL(kerSysLedCtrl); ++//<>JUNHON, 2004/09/15 ++EXPORT_SYMBOL(kerSysLedRegisterHwHandler); ++EXPORT_SYMBOL(BpGetBoardIds); ++EXPORT_SYMBOL(BpGetSdramSize); ++EXPORT_SYMBOL(BpGetPsiSize); ++EXPORT_SYMBOL(BpGetEthernetMacInfo); ++EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios); ++EXPORT_SYMBOL(BpGetPressAndHoldResetGpio); ++EXPORT_SYMBOL(BpGetVoipResetGpio); ++EXPORT_SYMBOL(BpGetVoipIntrGpio); ++EXPORT_SYMBOL(BpGetPcmciaResetGpio); ++EXPORT_SYMBOL(BpGetRtsCtsUartGpios); ++EXPORT_SYMBOL(BpGetAdslLedGpio); ++EXPORT_SYMBOL(BpGetAdslFailLedGpio); ++EXPORT_SYMBOL(BpGetWirelessLedGpio); ++EXPORT_SYMBOL(BpGetUsbLedGpio); ++EXPORT_SYMBOL(BpGetHpnaLedGpio); ++EXPORT_SYMBOL(BpGetWanDataLedGpio); ++EXPORT_SYMBOL(BpGetPppLedGpio); ++EXPORT_SYMBOL(BpGetPppFailLedGpio); ++EXPORT_SYMBOL(BpGetVoipLedGpio); ++EXPORT_SYMBOL(BpGetWirelessExtIntr); ++EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr); ++EXPORT_SYMBOL(BpGetVoipExtIntr); ++EXPORT_SYMBOL(BpGetHpnaExtIntr); ++EXPORT_SYMBOL(BpGetHpnaChipSelect); ++EXPORT_SYMBOL(BpGetVoipChipSelect); ++EXPORT_SYMBOL(BpGetWirelessSesBtnGpio); ++EXPORT_SYMBOL(BpGetWirelessSesExtIntr); ++EXPORT_SYMBOL(BpGetWirelessSesLedGpio); ++EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler); ++EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler); ++EXPORT_SYMBOL(kerSysGetCycleCount); ++EXPORT_SYMBOL(kerSysSetWdTimer); ++EXPORT_SYMBOL(kerSysWakeupMonitorTask); ++ +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/boardparms.c linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/boardparms.c +--- linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/boardparms.c 2006-07-07 22:16:11.000000000 +0200 +@@ -0,0 +1,2391 @@ ++/* ++<:copyright-gpl ++ ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ ++:> ++*/ ++/************************************************************************** ++ * File Name : boardparms.c ++ * ++ * Description: This file contains the implementation for the BCM63xx board ++ * parameter access functions. ++ * ++ * Updates : 07/14/2003 Created. ++ ***************************************************************************/ ++ ++/* Includes. */ ++#include "boardparms.h" ++ ++/* Defines. */ ++ ++/* Default psi size in K bytes */ ++#define BP_PSI_DEFAULT_SIZE 24 ++ ++/* Typedefs */ ++typedef struct boardparameters ++{ ++ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */ ++ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS]; ++ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP]; ++ unsigned short usSdramSize; /* SDRAM size and type */ ++ unsigned short usPsiSize; /* persistent storage in K bytes */ ++ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */ ++ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */ ++ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */ ++ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */ ++ unsigned short usGpioUartRts; /* GPIO pin or not defined */ ++ unsigned short usGpioUartCts; /* GPIO pin or not defined */ ++ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */ ++ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */ ++ unsigned short usGpioLedWireless; /* GPIO pin or not defined */ ++ unsigned short usGpioLedUsb; /* GPIO pin or not defined */ ++ unsigned short usGpioLedHpna; /* GPIO pin or not defined */ ++ unsigned short usGpioLedWanData; /* GPIO pin or not defined */ ++ unsigned short usGpioLedPpp; /* GPIO pin or not defined */ ++ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */ ++ unsigned short usExtIntrWireless; /* ext intr or not defined */ ++ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */ ++ unsigned short usExtIntrHpna; /* ext intr or not defined */ ++ unsigned short usCsHpna; /* chip select not defined */ ++ unsigned short usAntInUseWireless; /* antenna in use or not defined */ ++ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */ ++ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */ ++ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */ ++} BOARD_PARAMETERS, *PBOARD_PARAMETERS; ++ ++/* Variables */ ++#if defined(_BCM96338_) || defined(CONFIG_BCM96338) ++static BOARD_PARAMETERS g_bcm96338sv = ++{ ++ "96338SV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_NOT_DEFINED, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ ++ BP_NOT_DEFINED, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++static BOARD_PARAMETERS g_bcm96338l2m8m = ++{ ++ "96338L-2M-8M", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96338sv, &g_bcm96338l2m8m, 0}; ++#endif ++ ++#if defined(_BCM96345_) || defined(CONFIG_BCM96345) ++static BOARD_PARAMETERS g_bcm96345r = ++{ ++ "96345R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345gw2 = ++{ ++ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold ++ * Reset or RTS. ++ */ ++ "96345GW2", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_GPIO_0_AH, /* usGpioPhySpiSck */ ++ BP_GPIO_4_AH, /* usGpioPhySpiSs */ ++ BP_GPIO_12_AH, /* usGpioPhySpiMosi */ ++ BP_GPIO_11_AH, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_GPIO, /* usConfigType */ ++ BP_ENET_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_1, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_15_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_GPIO_2_AH, /* usGpioPcmciaReset */ ++ BP_GPIO_13_AH, /* usGpioUartRts */ ++ BP_GPIO_9_AH, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_GPIO_7_AH, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_EXT_INTR_2, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345gw = ++{ ++ "96345GW", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_1, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_15_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_1_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_GPIO_2_AH, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_GPIO_10_AH, /* usGpioLedWireless */ ++ BP_GPIO_7_AH, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_EXT_INTR_2, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_EXT_INTR_3, /* usExtIntrHpna */ ++ BP_CS_1, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96335r = ++{ ++ "96335R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_9_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_9_AH, /* usGpioLedWanData */ ++ BP_GPIO_8_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_9_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345r0 = ++{ ++ "96345R0", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_9_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345rs = ++{ ++ "96345RS", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0, ++ &g_bcm96345rs, 0}; ++#endif ++ ++#if defined(_BCM96348_) || defined(CONFIG_BCM96348) ++ ++static BOARD_PARAMETERS g_bcm96348r = ++{ ++ "96348R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348lv = ++{ ++ "96348LV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ ++ 0x02, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_GPIO_5_AL, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348gw = ++{ ++ "96348GW", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcm96348gw_10 = ++{ ++ "96348GW-10", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348gw_11 = ++{ ++ "96348GW-11", /* szBoardId */ ++ {{BP_ENET_NO_PHY}, /* ucPhyType */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348sv = ++{ ++ "96348SV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ ++ 0x1f, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_NOT_DEFINED, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ ++ BP_NOT_DEFINED, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcm96348gw_dualDsp = ++{ ++ "96348GW-DualDSP", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_UNEQUIPPED, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_DSP, /* ucDspType */ ++ 0x01, /* ucDspAddress */ ++ BP_EXT_INTR_3, /* usExtIntrVoip */ ++ BP_UNEQUIPPED , /* usGpioVoipReset */ ++ BP_GPIO_35_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_3}}, /* usCsVoip */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcmCustom_01 = ++{ ++ "BCMCUST_01", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_36_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AL, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10, ++ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp, ++ &g_bcmCustom_01, 0}; ++#endif ++ ++static PBOARD_PARAMETERS g_pCurrentBp = 0; ++ ++/************************************************************************** ++ * Name : bpstrcmp ++ * ++ * Description: String compare for this file so it does not depend on an OS. ++ * (Linux kernel and CFE share this source file.) ++ * ++ * Parameters : [IN] dest - destination string ++ * [IN] src - source string ++ * ++ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src ++ ***************************************************************************/ ++static int bpstrcmp(const char *dest,const char *src); ++static int bpstrcmp(const char *dest,const char *src) ++{ ++ while (*src && *dest) ++ { ++ if (*dest < *src) return -1; ++ if (*dest > *src) return 1; ++ dest++; ++ src++; ++ } ++ ++ if (*dest && !*src) return 1; ++ if (!*dest && *src) return -1; ++ return 0; ++} /* bpstrcmp */ ++ ++/************************************************************************** ++ * Name : BpGetVoipDspConfig ++ * ++ * Description: Gets the DSP configuration from the board parameter ++ * structure for a given DSP index. ++ * ++ * Parameters : [IN] dspNum - DSP index (number) ++ * ++ * Returns : Pointer to DSP configuration block if found/valid, NULL ++ * otherwise. ++ ***************************************************************************/ ++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ); ++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ) ++{ ++ VOIP_DSP_INFO *pDspConfig = 0; ++ int i; ++ ++ if( g_pCurrentBp ) ++ { ++ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ ) ++ { ++ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP && ++ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum ) ++ { ++ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i]; ++ break; ++ } ++ } ++ } ++ ++ return pDspConfig; ++} ++ ++ ++/************************************************************************** ++ * Name : BpSetBoardId ++ * ++ * Description: This function find the BOARD_PARAMETERS structure for the ++ * specified board id string and assigns it to a global, static ++ * variable. ++ * ++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not ++ * have a board parameters configuration record. ++ ***************************************************************************/ ++int BpSetBoardId( char *pszBoardId ) ++{ ++ int nRet = BP_BOARD_ID_NOT_FOUND; ++ PBOARD_PARAMETERS *ppBp; ++ ++ for( ppBp = g_BoardParms; *ppBp; ppBp++ ) ++ { ++ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) ) ++ { ++ g_pCurrentBp = *ppBp; ++ nRet = BP_SUCCESS; ++ break; ++ } ++ } ++ ++ return( nRet ); ++} /* BpSetBoardId */ ++ ++/************************************************************************** ++ * Name : BpGetBoardIds ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id ++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN ++ * boundary. ++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that ++ * were allocated in pszBoardIds. ++ * ++ * Returns : Number of board id strings returned. ++ ***************************************************************************/ ++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ) ++{ ++ PBOARD_PARAMETERS *ppBp; ++ int i; ++ char *src; ++ char *dest; ++ ++ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize; ++ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN ) ++ { ++ dest = pszBoardIds; ++ src = (*ppBp)->szBoardId; ++ while( *src ) ++ *dest++ = *src++; ++ *dest = '\0'; ++ } ++ ++ return( i ); ++} /* BpGetBoardIds */ ++ ++/************************************************************************** ++ * Name : BpGetEthernetMacInfo ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO ++ * buffers. ++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that ++ * are pointed to by pEnetInfos. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ) ++{ ++ int i, nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) ++ { ++ if( i < BP_MAX_ENET_MACS ) ++ { ++ unsigned char *src = (unsigned char *) ++ &g_pCurrentBp->EnetMacInfos[i]; ++ unsigned char *dest = (unsigned char *) pEnetInfos; ++ int len = sizeof(ETHERNET_MAC_INFO); ++ while( len-- ) ++ *dest++ = *src++; ++ } ++ else ++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; ++ } ++ ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) ++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; ++ ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetEthernetMacInfo */ ++ ++/************************************************************************** ++ * Name : BpGetSdramSize ++ * ++ * Description: This function returns a constant that describees the board's ++ * SDRAM type and size. ++ * ++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size ++ * is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetSdramSize( unsigned long *pulSdramSize ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulSdramSize = g_pCurrentBp->usSdramSize; ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ *pulSdramSize = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetSdramSize */ ++ ++/************************************************************************** ++ * Name : BpGetPsiSize ++ * ++ * Description: This function returns the persistent storage size in K bytes. ++ * ++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent ++ * storage size is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetPsiSize( unsigned long *pulPsiSize ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulPsiSize = g_pCurrentBp->usPsiSize; ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ *pulPsiSize = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPsiSize */ ++ ++/************************************************************************** ++ * Name : BpGetRj11InnerOuterPairGpios ++ * ++ * Description: This function returns the GPIO pin assignments for changing ++ * between the RJ11 inner pair and RJ11 outer pair. ++ * ++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair ++ * GPIO pin is returned in. ++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, ++ unsigned short *pusOuter ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusInner = g_pCurrentBp->usGpioRj11InnerPair; ++ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair; ++ ++ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED && ++ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusInner = *pusOuter = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetRj11InnerOuterPairGpios */ ++ ++/************************************************************************** ++ * Name : BpGetPressAndHoldResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the press ++ * and hold reset button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the press and hold ++ * reset button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPressAndHoldResetGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset; ++ ++ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPressAndHoldResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioVoipReset; ++ ++ if( *pusValue != BP_NOT_DEFINED || ++ *pusValue == BP_UNEQUIPPED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipIntrGpio ++ * ++ * Description: This function returns the GPIO pin assignment for VoIP interrupt. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioVoipIntr; ++ ++ if( *pusValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipIntrGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPcmciaResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PCMCIA ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPcmciaResetGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioPcmciaReset; ++ ++ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPcmciaResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetUartRtsCtsGpios ++ * ++ * Description: This function returns the GPIO pin assignments for RTS and CTS ++ * UART signals. ++ * ++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO ++ * pin is returned in. ++ * [OUT] pusCts - Address of short word that the UART CTS GPIO ++ * pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, board id input string does not ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusRts = g_pCurrentBp->usGpioUartRts; ++ *pusCts = g_pCurrentBp->usGpioUartCts; ++ ++ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED && ++ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusRts = *pusCts = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetUartRtsCtsGpios */ ++ ++/************************************************************************** ++ * Name : BpGetAdslLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedAdsl; ++ ++ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetAdslFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED that is used when there is a DSL connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslFailLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedAdslFail; ++ ++ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslFailLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedWireless; ++ ++ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessAntInUse ++ * ++ * Description: This function returns the antennas in use for wireless ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna ++ * is in use. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessAntInUse( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usAntInUseWireless; ++ ++ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessAntInUse */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesBtnGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesBtnGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioSesBtnWireless; ++ ++ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessSesBtnGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesExtIntr ++ * ++ * Description: This function returns the external interrupt number for the ++ * Wireless Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * external interrup is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesExtIntr( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless; ++ ++ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++ ++} /* BpGetWirelessSesExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Led. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Led GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedSesWireless; ++ ++ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++ ++} /* BpGetWirelessSesLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetUsbLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the USB ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the USB LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetUsbLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedUsb; ++ ++ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetUsbLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the HPNA ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedHpna; ++ ++ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWanDataLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the WAN Data ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWanDataLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedWanData; ++ ++ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWanDataLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPppLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedPpp; ++ ++ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPppLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPppFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED that is used when there is a PPP connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppFailLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedPppFail; ++ ++ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPppFailLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderPowerOnLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the power ++ * on LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn; ++ ++ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderPowerOn */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderAlarmLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the alarm ++ * LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlAlarm; ++ ++ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderAlarmLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderResetCfgLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the reset ++ * configuration LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the reset ++ * configuration LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg; ++ ++ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderResetCfgLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderStopLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the break ++ * into bootloader LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the break into ++ * bootloader LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderStopLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlStop; ++ ++ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderStopLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ * ++ * Note : The VoIP structure would allow for having one LED per DSP ++ * however, the board initialization function assumes only one ++ * LED per functionality (ie one LED for VoIP). Therefore in ++ * order to keep this tidy and simple we do not make usage of the ++ * one-LED-per-DSP function. Instead, we assume that the LED for ++ * VoIP is unique and associated with DSP 0 (always present on ++ * any VoIP platform). If changing this to a LED-per-DSP function ++ * then one need to update the board initialization driver in ++ * bcmdrivers\opensource\char\board\bcm963xx\impl1 ++ ***************************************************************************/ ++int BpGetVoipLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioLedVoip; ++ ++ if( *pusValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessExtIntr ++ * ++ * Description: This function returns the Wireless external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the wireless ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrWireless; ++ ++ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetAdslDyingGaspExtIntr ++ * ++ * Description: This function returns the ADSL Dying Gasp external interrupt ++ * number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp; ++ ++ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslDyingGaspExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetVoipExtIntr ++ * ++ * Description: This function returns the VOIP external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * external interrupt number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pulValue = pDspInfo->usExtIntrVoip; ++ ++ if( *pulValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaExtIntr ++ * ++ * Description: This function returns the HPNA external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrHpna; ++ ++ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaChipSelect ++ * ++ * Description: This function returns the HPNA chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * chip select number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaChipSelect( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usCsHpna; ++ ++ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaChipSelect */ ++ ++/************************************************************************** ++ * Name : BpGetVoipChipSelect ++ * ++ * Description: This function returns the VOIP chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * chip select number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pulValue = pDspInfo->usCsVoip; ++ ++ if( *pulValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipChipSelect */ ++ +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/boardparms.h linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/boardparms.h +--- linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/boardparms.h 2006-07-07 22:16:11.000000000 +0200 +@@ -0,0 +1,766 @@ ++/* ++<:copyright-gpl ++ ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ ++:> ++*/ ++/************************************************************************** ++ * File Name : boardparms.h ++ * ++ * Description: This file contains definitions and function prototypes for ++ * the BCM63xx board parameter access functions. ++ * ++ * Updates : 07/14/2003 Created. ++ ***************************************************************************/ ++ ++#if !defined(_BOARDPARMS_H) ++#define _BOARDPARMS_H ++ ++#if __cplusplus ++extern "C" { ++#endif ++ ++/* Return codes. */ ++#define BP_SUCCESS 0 ++#define BP_BOARD_ID_NOT_FOUND 1 ++#define BP_VALUE_NOT_DEFINED 2 ++#define BP_BOARD_ID_NOT_SET 3 ++ ++/* Values for BpGetSdramSize. */ ++#define BP_MEMORY_8MB_1_CHIP 0 ++#define BP_MEMORY_16MB_1_CHIP 1 ++#define BP_MEMORY_32MB_1_CHIP 2 ++#define BP_MEMORY_64MB_2_CHIP 3 ++#define BP_MEMORY_32MB_2_CHIP 4 ++#define BP_MEMORY_16MB_2_CHIP 5 ++ ++/* Values for EthernetMacInfo PhyType. */ ++#define BP_ENET_NO_PHY 0 ++#define BP_ENET_INTERNAL_PHY 1 ++#define BP_ENET_EXTERNAL_PHY 2 ++#define BP_ENET_EXTERNAL_SWITCH 3 ++ ++/* Values for EthernetMacInfo Configuration type. */ ++#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */ ++#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */ ++#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */ ++ ++/* Values for EthernetMacInfo Reverse MII. */ ++#define BP_ENET_NO_REVERSE_MII 0 ++#define BP_ENET_REVERSE_MII 1 ++ ++/* Values for VoIPDSPInfo DSPType. */ ++#define BP_VOIP_NO_DSP 0 ++#define BP_VOIP_DSP 1 ++ ++ ++/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */ ++#define BP_ACTIVE_MASK 0x8000 ++#define BP_ACTIVE_HIGH 0x0000 ++#define BP_ACTIVE_LOW 0x8000 ++#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH) ++#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW) ++#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH) ++#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW) ++#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH) ++#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW) ++#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH) ++#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW) ++#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH) ++#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW) ++#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH) ++#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW) ++#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH) ++#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW) ++#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH) ++#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW) ++#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH) ++#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW) ++#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH) ++#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW) ++#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH) ++#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW) ++#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH) ++#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW) ++#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH) ++#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW) ++#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH) ++#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW) ++#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH) ++#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW) ++#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH) ++#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW) ++#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH) ++#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW) ++#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH) ++#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW) ++#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH) ++#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW) ++#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH) ++#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW) ++#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH) ++#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW) ++#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH) ++#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW) ++#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH) ++#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW) ++#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH) ++#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW) ++#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH) ++#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW) ++#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH) ++#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW) ++#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH) ++#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW) ++#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH) ++#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW) ++#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH) ++#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW) ++#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH) ++#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW) ++#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH) ++#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW) ++#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH) ++#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW) ++#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH) ++#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW) ++#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH) ++#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW) ++#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH) ++#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW) ++#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH) ++#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW) ++#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH) ++#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW) ++ ++/* Values for external interrupt assignments. */ ++#define BP_EXT_INTR_0 0 ++#define BP_EXT_INTR_1 1 ++#define BP_EXT_INTR_2 2 ++#define BP_EXT_INTR_3 3 ++ ++/* Values for chip select assignments. */ ++#define BP_CS_0 0 ++#define BP_CS_1 1 ++#define BP_CS_2 2 ++#define BP_CS_3 3 ++ ++/* Value for GPIO and external interrupt fields that are not used. */ ++#define BP_NOT_DEFINED 0xffff ++#define BP_HW_DEFINED 0xfff0 ++#define BP_UNEQUIPPED 0xfff1 ++ ++/* Maximum size of the board id string. */ ++#define BP_BOARD_ID_LEN 16 ++ ++/* Maximum number of Ethernet MACs. */ ++#define BP_MAX_ENET_MACS 2 ++ ++/* Maximum number of VoIP DSPs. */ ++#define BP_MAX_VOIP_DSP 2 ++ ++/* Wireless Antenna Settings. */ ++#define BP_WLAN_ANT_MAIN 0 ++#define BP_WLAN_ANT_AUX 1 ++#define BP_WLAN_ANT_BOTH 3 ++ ++#if !defined(__ASSEMBLER__) ++ ++/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY, ++ * then the other fields are not valid. ++ */ ++typedef struct EthernetMacInfo ++{ ++ unsigned char ucPhyType; /* BP_ENET_xxx */ ++ unsigned char ucPhyAddress; /* 0 to 31 */ ++ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */ ++ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */ ++ unsigned short numSwitchPorts; /* Number of PHY ports */ ++ unsigned short usConfigType; /* Configuration type */ ++ unsigned short usReverseMii; /* Reverse MII */ ++} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO; ++ ++ ++/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP, ++ * then the other fields are not valid. ++ */ ++typedef struct VoIPDspInfo ++{ ++ unsigned char ucDspType; ++ unsigned char ucDspAddress; ++ unsigned short usExtIntrVoip; ++ unsigned short usGpioVoipReset; ++ unsigned short usGpioVoipIntr; ++ unsigned short usGpioLedVoip; ++ unsigned short usCsVoip; ++ ++} VOIP_DSP_INFO; ++ ++ ++/************************************************************************** ++ * Name : BpSetBoardId ++ * ++ * Description: This function find the BOARD_PARAMETERS structure for the ++ * specified board id string and assigns it to a global, static ++ * variable. ++ * ++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not ++ * have a board parameters configuration record. ++ ***************************************************************************/ ++int BpSetBoardId( char *pszBoardId ); ++ ++/************************************************************************** ++ * Name : BpGetBoardIds ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id ++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN ++ * boundary. ++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that ++ * were allocated in pszBoardIds. ++ * ++ * Returns : Number of board id strings returned. ++ ***************************************************************************/ ++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ); ++ ++/************************************************************************** ++ * Name : BpGetEthernetMacInfo ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO ++ * buffers. ++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that ++ * are pointed to by pEnetInfos. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ); ++ ++/************************************************************************** ++ * Name : BpGetSdramSize ++ * ++ * Description: This function returns a constant that describees the board's ++ * SDRAM type and size. ++ * ++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size ++ * is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetSdramSize( unsigned long *pulSdramSize ); ++ ++/************************************************************************** ++ * Name : BpGetPsiSize ++ * ++ * Description: This function returns the persistent storage size in K bytes. ++ * ++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent ++ * storage size is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetPsiSize( unsigned long *pulPsiSize ); ++ ++/************************************************************************** ++ * Name : BpGetRj11InnerOuterPairGpios ++ * ++ * Description: This function returns the GPIO pin assignments for changing ++ * between the RJ11 inner pair and RJ11 outer pair. ++ * ++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair ++ * GPIO pin is returned in. ++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, ++ unsigned short *pusOuter ); ++ ++/************************************************************************** ++ * Name : BpGetPressAndHoldResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the press ++ * and hold reset button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the press and hold ++ * reset button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPressAndHoldResetGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipIntrGpio ++ * ++ * Description: This function returns the GPIO pin assignment for VoIP interrupt. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPcmciaResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PCMCIA ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPcmciaResetGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetUartRtsCtsGpios ++ * ++ * Description: This function returns the GPIO pin assignments for RTS and CTS ++ * UART signals. ++ * ++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO ++ * pin is returned in. ++ * [OUT] pusCts - Address of short word that the UART CTS GPIO ++ * pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ); ++ ++/************************************************************************** ++ * Name : BpGetAdslLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetAdslFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED that is used when there is a DSL connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslFailLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessAntInUse ++ * ++ * Description: This function returns the antennas in use for wireless ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna ++ * is in use. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessAntInUse( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesBtnGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesBtnGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesExtIntr ++ * ++ * Description: This function returns the external interrupt number for the ++ * Wireless Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * external interrup is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesExtIntr( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Led. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Led GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetUsbLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the USB ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the USB LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetUsbLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the HPNA ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWanDataLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the WAN Data ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWanDataLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPppLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPppFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED that is used when there is a PPP connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppFailLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderPowerOnLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the power ++ * on LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderAlarmLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the alarm ++ * LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderResetCfgLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the reset ++ * configuration LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the reset ++ * configuration LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderStopLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the break ++ * into bootloader LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the break into ++ * bootloader LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderStopLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessExtIntr ++ * ++ * Description: This function returns the Wireless external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the wireless ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetAdslDyingGaspExtIntr ++ * ++ * Description: This function returns the ADSL Dying Gasp external interrupt ++ * number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipExtIntr ++ * ++ * Description: This function returns the VOIP external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * external interrupt number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaExtIntr ++ * ++ * Description: This function returns the HPNA external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaChipSelect ++ * ++ * Description: This function returns the HPNA chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * chip select number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaChipSelect( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipChipSelect ++ * ++ * Description: This function returns the VOIP chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * chip select number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ); ++ ++#endif /* __ASSEMBLER__ */ ++ ++#if __cplusplus ++} ++#endif ++ ++#endif /* _BOARDPARMS_H */ ++ +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/cfiflash.c linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/cfiflash.c +--- linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/cfiflash.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/cfiflash.c 2006-07-07 22:17:24.000000000 +0200 +@@ -0,0 +1,692 @@ ++/************************************************************************/ ++/* */ ++/* AMD CFI Enabled Flash Memory Drivers */ ++/* File name: CFIFLASH.C */ ++/* Revision: 1.0 5/07/98 */ ++/* */ ++/* Copyright (c) 1998 ADVANCED MICRO DEVICES, INC. All Rights Reserved. */ ++/* This software is unpublished and contains the trade secrets and */ ++/* confidential proprietary information of AMD. Unless otherwise */ ++/* provided in the Software Agreement associated herewith, it is */ ++/* licensed in confidence "AS IS" and is not to be reproduced in whole */ ++/* or part by any means except for backup. Use, duplication, or */ ++/* disclosure by the Government is subject to the restrictions in */ ++/* paragraph (b) (3) (B) of the Rights in Technical Data and Computer */ ++/* Software clause in DFAR 52.227-7013 (a) (Oct 1988). */ ++/* Software owned by */ ++/* Advanced Micro Devices, Inc., */ ++/* One AMD Place, */ ++/* P.O. Box 3453 */ ++/* Sunnyvale, CA 94088-3453. */ ++/************************************************************************/ ++/* This software constitutes a basic shell of source code for */ ++/* programming all AMD Flash components. AMD */ ++/* will not be responsible for misuse or illegal use of this */ ++/* software for devices not supported herein. AMD is providing */ ++/* this source code "AS IS" and will not be responsible for */ ++/* issues arising from incorrect user implementation of the */ ++/* source code herein. It is the user's responsibility to */ ++/* properly design-in this source code. */ ++/* */ ++/************************************************************************/ ++#ifdef _CFE_ ++#include "lib_types.h" ++#include "lib_printf.h" ++#include "lib_string.h" ++#include "cfe_timer.h" ++#define printk printf ++#else // linux ++#include ++#include ++#include ++#endif ++ ++#include "cfiflash.h" ++ ++static int flash_wait(WORD sector, int offset, UINT16 data); ++static UINT16 flash_get_device_id(void); ++static int flash_get_cfi(struct cfi_query *query, UINT16 *cfi_struct, int flashFamily); ++static int flash_write(WORD sector, int offset, byte *buf, int nbytes); ++static void flash_command(int command, WORD sector, int offset, UINT16 data); ++ ++/*********************************************************************/ ++/* 'meminfo' should be a pointer, but most C compilers will not */ ++/* allocate static storage for a pointer without calling */ ++/* non-portable functions such as 'new'. We also want to avoid */ ++/* the overhead of passing this pointer for every driver call. */ ++/* Systems with limited heap space will need to do this. */ ++/*********************************************************************/ ++struct flashinfo meminfo; /* Flash information structure */ ++static int flashFamily = FLASH_UNDEFINED; ++static int totalSize = 0; ++static struct cfi_query query; ++ ++static UINT16 cfi_data_struct_29W160[] = { ++ 0x0020, 0x0049, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, ++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, ++ 0x0051, 0x0052, 0x0059, 0x0002, 0x0000, 0x0040, 0x0000, 0x0000, ++ 0x0000, 0x0000, 0x0000, 0x0027, 0x0036, 0x0000, 0x0000, 0x0004, ++ 0x0000, 0x000a, 0x0000, 0x0004, 0x0000, 0x0003, 0x0000, 0x0015, ++ 0x0002, 0x0000, 0x0000, 0x0000, 0x0004, 0x0000, 0x0000, 0x0040, ++ 0x0000, 0x0001, 0x0000, 0x0020, 0x0000, 0x0000, 0x0000, 0x0080, ++ 0x0000, 0x001e, 0x0000, 0x0000, 0x0001, 0xffff, 0xffff, 0xffff, ++ 0x0050, 0x0052, 0x0049, 0x0031, 0x0030, 0x0000, 0x0002, 0x0001, ++ 0x0001, 0x0004, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0x0002, ++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, ++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, ++ 0xffff, 0x0888, 0x252b, 0x8c84, 0x7dbc, 0xffff, 0xffff, 0xffff, ++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, ++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, ++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff ++}; ++ ++ ++/*********************************************************************/ ++/* Init_flash is used to build a sector table from the information */ ++/* provided through the CFI query. This information is translated */ ++/* from erase_block information to base:offset information for each */ ++/* individual sector. This information is then stored in the meminfo */ ++/* structure, and used throughout the driver to access sector */ ++/* information. */ ++/* */ ++/* This is more efficient than deriving the sector base:offset */ ++/* information every time the memory map switches (since on the */ ++/* development platform can only map 64k at a time). If the entire */ ++/* flash memory array can be mapped in, then the addition static */ ++/* allocation for the meminfo structure can be eliminated, but the */ ++/* drivers will have to be re-written. */ ++/* */ ++/* The meminfo struct occupies 653 bytes of heap space, depending */ ++/* on the value of the define MAXSECTORS. Adjust to suit */ ++/* application */ ++/*********************************************************************/ ++byte flash_init(void) ++{ ++ int i=0, j=0, count=0; ++ int basecount=0L; ++ UINT16 device_id; ++ int flipCFIGeometry = FALSE; ++ ++ /* First, assume ++ * a single 8k sector for sector 0. This is to allow ++ * the system to perform memory mapping to the device, ++ * even though the actual physical layout is unknown. ++ * Once mapped in, the CFI query will produce all ++ * relevant information. ++ */ ++ meminfo.addr = 0L; ++ meminfo.areg = 0; ++ meminfo.nsect = 1; ++ meminfo.bank1start = 0; ++ meminfo.bank2start = 0; ++ ++ meminfo.sec[0].size = 8192; ++ meminfo.sec[0].base = 0x00000; ++ meminfo.sec[0].bank = 1; ++ ++ flash_command(FLASH_RESET, 0, 0, 0); ++ ++ device_id = flash_get_device_id(); ++ ++ switch (device_id) { ++ case ID_I28F160C3B: ++ case ID_I28F320C3B: ++ case ID_I28F160C3T: ++ case ID_I28F320C3T: ++ flashFamily = FLASH_INTEL; ++ break; ++ case ID_AM29DL800B: ++ case ID_AM29LV800B: ++ case ID_AM29LV400B: ++ case ID_AM29LV160B: ++ case ID_AM29LV320B: ++ case ID_MX29LV320AB: ++ case ID_AM29LV320MB: ++ case ID_AM29DL800T: ++ case ID_AM29LV800T: ++ case ID_AM29LV160T: ++ case ID_AM29LV320T: ++ case ID_MX29LV320AT: ++ case ID_AM29LV320MT: ++ flashFamily = FLASH_AMD; ++ break; ++ case ID_SST39VF1601: ++ case ID_SST39VF3201: ++ flashFamily = FLASH_SST; ++ break; ++ default: ++ printk("Flash memory not supported! Device id = %x\n", device_id); ++ return -1; ++ } ++ ++ if (flash_get_cfi(&query, 0, flashFamily) == -1) { ++ switch(device_id) { ++ case ID_AM29LV160T: ++ case ID_AM29LV160B: ++ flash_get_cfi(&query, cfi_data_struct_29W160, flashFamily); ++ break; ++ default: ++ printk("CFI data structure not found. Device id = %x\n", device_id); ++ return -1; ++ } ++ } ++ ++ // need to determine if it top or bottom boot here ++ switch (device_id) ++ { ++ case ID_AM29DL800B: ++ case ID_AM29LV800B: ++ case ID_AM29LV400B: ++ case ID_AM29LV160B: ++ case ID_AM29LV320B: ++ case ID_MX29LV320AB: ++ case ID_AM29LV320MB: ++ case ID_I28F160C3B: ++ case ID_I28F320C3B: ++ case ID_I28F160C3T: ++ case ID_I28F320C3T: ++ case ID_SST39VF1601: ++ case ID_SST39VF3201: ++ flipCFIGeometry = FALSE; ++ break; ++ case ID_AM29DL800T: ++ case ID_AM29LV800T: ++ case ID_AM29LV160T: ++ case ID_AM29LV320T: ++ case ID_MX29LV320AT: ++ case ID_AM29LV320MT: ++ flipCFIGeometry = TRUE; ++ break; ++ default: ++ printk("Flash memory not supported! Device id = %x\n", device_id); ++ return -1; ++ } ++ ++ count=0;basecount=0L; ++ ++ if (!flipCFIGeometry) ++ { ++ for (i=0; i= 0; i--) { ++ for(j=0; j relative_addr ) ++ { ++ blk_start--; // last blk, dec by 1 ++ } ++ else ++ if( blk_start == last_blk ) ++ { ++ printk("Address is too big.\n"); ++ blk_start = -1; ++ } ++ ++ return( blk_start ); ++} ++ ++/************************************************************************/ ++/* The purpose of flash_get_total_size() is to return the total size of */ ++/* the flash */ ++/************************************************************************/ ++int flash_get_total_size() ++{ ++ return totalSize; ++} ++ ++/*********************************************************************/ ++/* Flash_command() is the main driver function. It performs */ ++/* every possible command available to AMD B revision */ ++/* flash parts. Note that this command is not used directly, but */ ++/* rather called through the API wrapper functions provided below. */ ++/*********************************************************************/ ++static void flash_command(int command, WORD sector, int offset, UINT16 data) ++{ ++ volatile UINT16 *flashptr; ++ volatile UINT16 *flashbase; ++ ++ flashptr = (UINT16 *) flash_get_memptr(sector); ++ flashbase = (UINT16 *) flash_get_memptr(0); ++ ++ switch (flashFamily) { ++ case FLASH_UNDEFINED: ++ /* These commands should work for AMD, Intel and SST flashes */ ++ switch (command) { ++ case FLASH_RESET: ++ flashptr[0] = 0xF0; ++ flashptr[0] = 0xFF; ++ break; ++ case FLASH_READ_ID: ++ flashptr[0x5555] = 0xAA; /* unlock 1 */ ++ flashptr[0x2AAA] = 0x55; /* unlock 2 */ ++ flashptr[0x5555] = 0x90; ++ break; ++ default: ++ break; ++ } ++ break; ++ case FLASH_AMD: ++ switch (command) { ++ case FLASH_RESET: ++ flashptr[0] = 0xF0; ++ break; ++ case FLASH_READ_ID: ++ flashptr[0x555] = 0xAA; /* unlock 1 */ ++ flashptr[0x2AA] = 0x55; /* unlock 2 */ ++ flashptr[0x555] = 0x90; ++ break; ++ case FLASH_CFIQUERY: ++ flashptr[0x55] = 0x98; ++ break; ++ case FLASH_UB: ++ flashptr[0x555] = 0xAA; /* unlock 1 */ ++ flashptr[0x2AA] = 0x55; /* unlock 2 */ ++ flashptr[0x555] = 0x20; ++ break; ++ case FLASH_PROG: ++ flashptr[0] = 0xA0; ++ flashptr[offset/2] = data; ++ break; ++ case FLASH_UBRESET: ++ flashptr[0] = 0x90; ++ flashptr[0] = 0x00; ++ break; ++ case FLASH_SERASE: ++ flashptr[0x555] = 0xAA; /* unlock 1 */ ++ flashptr[0x2AA] = 0x55; /* unlock 2 */ ++ flashptr[0x555] = 0x80; ++ flashptr[0x555] = 0xAA; ++ flashptr[0x2AA] = 0x55; ++ flashptr[0] = 0x30; ++ break; ++ default: ++ break; ++ } ++ break; ++ case FLASH_INTEL: ++ switch (command) { ++ case FLASH_RESET: ++ flashptr[0] = 0xFF; ++ break; ++ case FLASH_READ_ID: ++ flashptr[0] = 0x90; ++ break; ++ case FLASH_CFIQUERY: ++ flashptr[0] = 0x98; ++ break; ++ case FLASH_PROG: ++ flashptr[0] = 0x40; ++ flashptr[offset/2] = data; ++ break; ++ case FLASH_SERASE: ++ flashptr[0] = 0x60; ++ flashptr[0] = 0xD0; ++ flashptr[0] = 0x20; ++ flashptr[0] = 0xD0; ++ break; ++ default: ++ break; ++ } ++ break; ++ case FLASH_SST: ++ switch (command) { ++ case FLASH_RESET: ++ flashbase[0x5555] = 0xAA; /* unlock 1 */ ++ flashbase[0x2AAA] = 0x55; /* unlock 2 */ ++ flashbase[0x5555] = 0xf0; ++ break; ++ case FLASH_READ_ID: ++ flashbase[0x5555] = 0xAA; /* unlock 1 */ ++ flashbase[0x2AAA] = 0x55; /* unlock 2 */ ++ flashbase[0x5555] = 0x90; ++ break; ++ case FLASH_CFIQUERY: ++ flashbase[0x5555] = 0xAA; /* unlock 1 */ ++ flashbase[0x2AAA] = 0x55; /* unlock 2 */ ++ flashbase[0x5555] = 0x98; ++ break; ++ case FLASH_UB: ++ break; ++ case FLASH_PROG: ++ flashbase[0x5555] = 0xAA; /* unlock 1 */ ++ flashbase[0x2AAA] = 0x55; /* unlock 2 */ ++ flashbase[0x5555] = 0xa0; ++ flashptr[offset/2] = data; ++ break; ++ case FLASH_UBRESET: ++ break; ++ case FLASH_SERASE: ++ flashbase[0x5555] = 0xAA; /* unlock 1 */ ++ flashbase[0x2AAA] = 0x55; /* unlock 2 */ ++ flashbase[0x5555] = 0x80; ++ flashbase[0x5555] = 0xAA; ++ flashbase[0x2AAA] = 0x55; ++ flashptr[0] = 0x30; ++ break; ++ default: ++ break; ++ } ++ break; ++ default: ++ break; ++ } ++} ++ ++/*********************************************************************/ ++/* flash_write extends the functionality of flash_program() by */ ++/* providing an faster way to program multiple data words, without */ ++/* needing the function overhead of looping algorithms which */ ++/* program word by word. This function utilizes fast pointers */ ++/* to quickly loop through bulk data. */ ++/*********************************************************************/ ++static int flash_write(WORD sector, int offset, byte *buf, int nbytes) ++{ ++ UINT16 *src; ++ src = (UINT16 *)buf; ++ ++ if ((nbytes | offset) & 1) { ++ return -1; ++ } ++ ++ flash_command(FLASH_UB, 0, 0, 0); ++ while (nbytes > 0) { ++ flash_command(FLASH_PROG, sector, offset, *src); ++ if (flash_wait(sector, offset, *src) != STATUS_READY) ++ break; ++ offset +=2; ++ nbytes -=2; ++ src++; ++ } ++ flash_command(FLASH_UBRESET, 0, 0, 0); ++ ++ return (byte*)src - buf; ++} ++ ++/*********************************************************************/ ++/* flash_wait utilizes the DQ6, DQ5, and DQ2 polling algorithms */ ++/* described in the flash data book. It can quickly ascertain the */ ++/* operational status of the flash device, and return an */ ++/* appropriate status code (defined in flash.h) */ ++/*********************************************************************/ ++static int flash_wait(WORD sector, int offset, UINT16 data) ++{ ++ volatile UINT16 *flashptr; /* flash window */ ++ UINT16 d1; ++ ++ flashptr = (UINT16 *) flash_get_memptr(sector); ++ ++ if (flashFamily == FLASH_AMD || flashFamily == FLASH_SST) { ++#if defined(_BCM96338_) || defined(CONFIG_BCM96338) ++ do { ++ d1 = flashptr[offset/2]; ++ if (d1 == data) ++ return STATUS_READY; ++ } while (!(d1 & 0x20)); ++ ++ d1 = flashptr[offset/2]; ++ ++ if (d1 != data) { ++ flash_command(FLASH_RESET, 0, 0, 0); ++ return STATUS_TIMEOUT; ++ } ++#else ++ do { ++ d1 = *flashptr; /* read data */ ++ d1 ^= *flashptr; /* read it again and see what toggled */ ++ if (d1 == 0) /* no toggles, nothing's happening */ ++ return STATUS_READY; ++ } while (!(d1 & 0x20)); ++ ++ d1 = *flashptr; /* read data */ ++ d1 ^= *flashptr; /* read it again and see what toggled */ ++ ++ if (d1 != 0) { ++ flash_command(FLASH_RESET, 0, 0, 0); ++ return STATUS_TIMEOUT; ++ } ++#endif ++ } else if (flashFamily == FLASH_INTEL) { ++ flashptr[0] = 0x70; ++ /* Wait for completion */ ++ while(!(*flashptr & 0x80)); ++ if (*flashptr & 0x30) { ++ flashptr[0] = 0x50; ++ flash_command(FLASH_RESET, 0, 0, 0); ++ return STATUS_TIMEOUT; ++ } ++ flashptr[0] = 0x50; ++ flash_command(FLASH_RESET, 0, 0, 0); ++ } ++ ++ return STATUS_READY; ++} ++ ++/*********************************************************************/ ++/* flash_get_device_id() will perform an autoselect sequence on the */ ++/* flash device, and return the device id of the component. */ ++/* This function automatically resets to read mode. */ ++/*********************************************************************/ ++static UINT16 flash_get_device_id() ++{ ++ volatile UINT16 *fwp; /* flash window */ ++ UINT16 answer; ++ ++ fwp = (UINT16 *)flash_get_memptr(0); ++ ++ flash_command(FLASH_READ_ID, 0, 0, 0); ++ answer = *(fwp + 1); ++ if (answer == ID_AM29LV320M) { ++ answer = *(fwp + 0xe); ++ answer = *(fwp + 0xf); ++ } ++ ++ flash_command(FLASH_RESET, 0, 0, 0); ++ return( (UINT16) answer ); ++} ++ ++/*********************************************************************/ ++/* flash_get_cfi() is the main CFI workhorse function. Due to it's */ ++/* complexity and size it need only be called once upon */ ++/* initializing the flash system. Once it is called, all operations */ ++/* are performed by looking at the meminfo structure. */ ++/* All possible care was made to make this algorithm as efficient as */ ++/* possible. 90% of all operations are memory reads, and all */ ++/* calculations are done using bit-shifts when possible */ ++/*********************************************************************/ ++static int flash_get_cfi(struct cfi_query *query, UINT16 *cfi_struct, int flashFamily) ++{ ++ volatile UINT16 *fwp; /* flash window */ ++ int i=0; ++ ++ flash_command(FLASH_CFIQUERY, 0, 0, 0); ++ ++ if (cfi_struct == 0) ++ fwp = (UINT16 *)flash_get_memptr(0); ++ else ++ fwp = cfi_struct; ++ ++ /* Initial house-cleaning */ ++ for(i=0; i < 8; i++) { ++ query->erase_block[i].sector_size = 0; ++ query->erase_block[i].num_sectors = 0; ++ } ++ ++ /* If not 'QRY', then we dont have a CFI enabled device in the socket */ ++ if( fwp[0x10] != 'Q' && ++ fwp[0x11] != 'R' && ++ fwp[0x12] != 'Y') { ++ flash_command(FLASH_RESET, 0, 0, 0); ++ return(-1); ++ } ++ ++ query->num_erase_blocks = fwp[0x2C]; ++ if(flashFamily == FLASH_SST) ++ query->num_erase_blocks = 1; ++ ++ for(i=0; i < query->num_erase_blocks; i++) { ++ query->erase_block[i].num_sectors = fwp[(0x2D+(4*i))] + (fwp[0x2E + (4*i)] << 8); ++ query->erase_block[i].num_sectors++; ++ query->erase_block[i].sector_size = 256 * (256 * fwp[(0x30+(4*i))] + fwp[(0x2F+(4*i))]); ++ } ++ ++ flash_command(FLASH_RESET, 0, 0, 0); ++ return(1); ++} +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/cfiflash.h linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/cfiflash.h +--- linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/cfiflash.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/cfiflash.h 2006-07-07 22:17:24.000000000 +0200 +@@ -0,0 +1,150 @@ ++/************************************************************************/ ++/* */ ++/* AMD CFI Enabled Flash Memory Drivers */ ++/* File name: CFIFLASH.H */ ++/* Revision: 1.0 5/07/98 */ ++/* */ ++/* Copyright (c) 1998 ADVANCED MICRO DEVICES, INC. All Rights Reserved. */ ++/* This software is unpublished and contains the trade secrets and */ ++/* confidential proprietary information of AMD. Unless otherwise */ ++/* provided in the Software Agreement associated herewith, it is */ ++/* licensed in confidence "AS IS" and is not to be reproduced in whole */ ++/* or part by any means except for backup. Use, duplication, or */ ++/* disclosure by the Government is subject to the restrictions in */ ++/* paragraph (b) (3) (B) of the Rights in Technical Data and Computer */ ++/* Software clause in DFAR 52.227-7013 (a) (Oct 1988). */ ++/* Software owned by */ ++/* Advanced Micro Devices, Inc., */ ++/* One AMD Place, */ ++/* P.O. Box 3453 */ ++/* Sunnyvale, CA 94088-3453. */ ++/************************************************************************/ ++/* This software constitutes a basic shell of source code for */ ++/* programming all AMD Flash components. AMD */ ++/* will not be responsible for misuse or illegal use of this */ ++/* software for devices not supported herein. AMD is providing */ ++/* this source code "AS IS" and will not be responsible for */ ++/* issues arising from incorrect user implementation of the */ ++/* source code herein. It is the user's responsibility to */ ++/* properly design-in this source code. */ ++/* */ ++/************************************************************************/ ++#ifndef _CFIFLASH_H ++#define _CFIFLASH_H ++ ++#if defined __cplusplus ++extern "C" { ++#endif ++ ++/* include board/CPU specific definitions */ ++#include "bcmtypes.h" ++#include "board.h" ++ ++#define FLASH_BASE_ADDR_REG FLASH_BASE ++ ++#ifndef NULL ++#define NULL 0 ++#endif ++ ++#define MAXSECTORS 1024 /* maximum number of sectors supported */ ++ ++/* A structure for identifying a flash part. There is one for each ++ * of the flash part definitions. We need to keep track of the ++ * sector organization, the address register used, and the size ++ * of the sectors. ++ */ ++struct flashinfo { ++ char *name; /* "Am29DL800T", etc. */ ++ unsigned long addr; /* physical address, once translated */ ++ int areg; /* Can be set to zero for all parts */ ++ int nsect; /* # of sectors -- 19 in LV, 22 in DL */ ++ int bank1start; /* first sector # in bank 1 */ ++ int bank2start; /* first sector # in bank 2, if DL part */ ++ struct { ++ long size; /* # of bytes in this sector */ ++ long base; /* offset from beginning of device */ ++ int bank; /* 1 or 2 for DL; 1 for LV */ ++ } sec[MAXSECTORS]; /* per-sector info */ ++}; ++ ++/* ++ * This structure holds all CFI query information as defined ++ * in the JEDEC standard. All information up to ++ * primary_extended_query is standard among all manufactures ++ * with CFI enabled devices. ++ */ ++ ++struct cfi_query { ++ int num_erase_blocks; /* Number of sector defs. */ ++ struct { ++ unsigned long sector_size; /* byte size of sector */ ++ int num_sectors; /* Num sectors of this size */ ++ } erase_block[8]; /* Max of 256, but 8 is good */ ++}; ++ ++/* Standard Boolean declarations */ ++#define TRUE 1 ++#define FALSE 0 ++ ++/* Define different type of flash */ ++#define FLASH_UNDEFINED 0 ++#define FLASH_AMD 1 ++#define FLASH_INTEL 2 ++#define FLASH_SST 3 ++ ++/* Command codes for the flash_command routine */ ++#define FLASH_RESET 0 /* reset to read mode */ ++#define FLASH_READ_ID 1 /* read device ID */ ++#define FLASH_CFIQUERY 2 /* CFI query */ ++#define FLASH_UB 3 /* go into unlock bypass mode */ ++#define FLASH_PROG 4 /* program a word */ ++#define FLASH_UBRESET 5 /* reset to read mode from unlock bypass mode */ ++#define FLASH_SERASE 6 /* sector erase */ ++ ++/* Return codes from flash_status */ ++#define STATUS_READY 0 /* ready for action */ ++#define STATUS_TIMEOUT 1 /* operation timed out */ ++ ++/* A list of AMD compatible device ID's - add others as needed */ ++#define ID_AM29DL800T 0x224A ++#define ID_AM29DL800B 0x22CB ++#define ID_AM29LV800T 0x22DA ++#define ID_AM29LV800B 0x225B ++#define ID_AM29LV400B 0x22BA ++ ++#define ID_AM29LV160B 0x2249 ++#define ID_AM29LV160T 0x22C4 ++ ++#define ID_AM29LV320T 0x22F6 ++#define ID_MX29LV320AT 0x22A7 ++#define ID_AM29LV320B 0x22F9 ++#define ID_MX29LV320AB 0x22A8 ++ ++#define ID_AM29LV320M 0x227E ++#define ID_AM29LV320MB 0x2200 ++#define ID_AM29LV320MT 0x2201 ++ ++#define ID_SST39VF1601 0x234B ++#define ID_SST39VF3201 0x235B ++ ++/* A list of Intel compatible device ID's - add others as needed */ ++#define ID_I28F160C3T 0x88C2 ++#define ID_I28F160C3B 0x88C3 ++#define ID_I28F320C3T 0x88C4 ++#define ID_I28F320C3B 0x88C5 ++ ++extern byte flash_init(void); ++extern int flash_write_buf(WORD sector, int offset, byte *buffer, int numbytes); ++extern int flash_read_buf(WORD sector, int offset, byte *buffer, int numbytes); ++extern byte flash_sector_erase_int(WORD sector); ++extern int flash_get_numsectors(void); ++extern int flash_get_sector_size(WORD sector); ++extern int flash_get_total_size(void); ++extern unsigned char *flash_get_memptr(WORD sector); ++extern int flash_get_blk(int addr); ++ ++#if defined __cplusplus ++} ++#endif ++ ++#endif +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/irq.c linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/irq.c +--- linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/irq.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/irq.c 2006-07-07 22:15:18.000000000 +0200 +@@ -0,0 +1,274 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * Interrupt control functions for Broadcom 963xx MIPS boards ++ */ ++ ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static void irq_dispatch_int(struct pt_regs *regs) ++{ ++ unsigned int pendingIrqs; ++ static unsigned int irqBit; ++ static unsigned int isrNumber = 31; ++ ++ pendingIrqs = PERF->IrqStatus & PERF->IrqMask; ++ if (!pendingIrqs) { ++ return; ++ } ++ ++ while (1) { ++ irqBit <<= 1; ++ isrNumber++; ++ if (isrNumber == 32) { ++ isrNumber = 0; ++ irqBit = 0x1; ++ } ++ if (pendingIrqs & irqBit) { ++ PERF->IrqMask &= ~irqBit; // mask ++ do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET, regs); ++ break; ++ } ++ } ++} ++ ++static void irq_dispatch_ext(uint32 irq, struct pt_regs *regs) ++{ ++ if (!(PERF->ExtIrqCfg & (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)))) { ++ printk("**** Ext IRQ mask. Should not dispatch ****\n"); ++ } ++ /* disable and clear interrupt in the controller */ ++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); ++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); ++ do_IRQ(irq, regs); ++} ++ ++void brcm_irq_dispatch(struct pt_regs *regs) ++{ ++ u32 cause; ++ while((cause = (read_c0_cause()& CAUSEF_IP))) { ++ if (cause & CAUSEF_IP7) ++ do_IRQ(MIPS_TIMER_INT, regs); ++ else if (cause & CAUSEF_IP2) ++ irq_dispatch_int(regs); ++ else if (cause & CAUSEF_IP3) ++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0, regs); ++ else if (cause & CAUSEF_IP4) ++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1, regs); ++ else if (cause & CAUSEF_IP5) ++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2, regs); ++ else if (cause & CAUSEF_IP6) ++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3, regs); ++ cli(); ++ } ++} ++ ++ ++void enable_brcm_irq(unsigned int irq) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { ++ PERF->IrqMask |= (1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); ++ } ++ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { ++ /* enable and clear interrupt in the controller */ ++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); ++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); ++ } ++ local_irq_restore(flags); ++} ++ ++void disable_brcm_irq(unsigned int irq) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { ++ PERF->IrqMask &= ~(1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); ++ } ++ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { ++ /* disable interrupt in the controller */ ++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); ++ } ++ local_irq_restore(flags); ++} ++ ++void ack_brcm_irq(unsigned int irq) ++{ ++ /* Already done in brcm_irq_dispatch */ ++} ++ ++unsigned int startup_brcm_irq(unsigned int irq) ++{ ++ enable_brcm_irq(irq); ++ ++ return 0; /* never anything pending */ ++} ++ ++unsigned int startup_brcm_none(unsigned int irq) ++{ ++ return 0; ++} ++ ++void end_brcm_irq(unsigned int irq) ++{ ++ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) ++ enable_brcm_irq(irq); ++} ++ ++void end_brcm_none(unsigned int irq) ++{ ++} ++ ++#define ALLINTS_NOTIMER (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) ++ ++static void __init brcm_irq_setup(void) ++{ ++ extern asmlinkage void brcmIRQ(void); ++ ++ clear_c0_status(ST0_BEV); ++ set_except_vector(0, brcmIRQ); ++ change_c0_status(ST0_IM, ALLINTS_NOTIMER); ++ ++#ifdef CONFIG_REMOTE_DEBUG ++ rs_kgdb_hook(0); ++#endif ++} ++ ++static struct hw_interrupt_type brcm_irq_type = { ++ .typename = "MIPS", ++ .startup = startup_brcm_irq, ++ .shutdown = disable_brcm_irq, ++ .enable = enable_brcm_irq, ++ .disable = disable_brcm_irq, ++ .ack = ack_brcm_irq, ++ .end = end_brcm_irq, ++ .set_affinity = NULL ++}; ++ ++static struct hw_interrupt_type brcm_irq_no_end_type = { ++ .typename = "MIPS", ++ .startup = startup_brcm_none, ++ .shutdown = disable_brcm_irq, ++ .enable = enable_brcm_irq, ++ .disable = disable_brcm_irq, ++ .ack = ack_brcm_irq, ++ .end = end_brcm_none, ++ .set_affinity = NULL ++}; ++ ++void __init arch_init_irq(void) ++{ ++ int i; ++ ++ for (i = 0; i < NR_IRQS; i++) { ++ irq_desc[i].status = IRQ_DISABLED; ++ irq_desc[i].action = 0; ++ irq_desc[i].depth = 1; ++ irq_desc[i].handler = &brcm_irq_type; ++ } ++ ++ brcm_irq_setup(); ++} ++ ++int request_external_irq(unsigned int irq, ++ FN_HANDLER handler, ++ unsigned long irqflags, ++ const char * devname, ++ void *dev_id) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ ++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); // Clear ++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); // Mask ++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_INSENS_SHFT)); // Edge insesnsitive ++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_LEVEL_SHFT)); // Level triggered ++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_SENSE_SHFT)); // Low level ++ ++ local_irq_restore(flags); ++ ++ return( request_irq(irq, handler, irqflags, devname, dev_id) ); ++} ++ ++/* VxWorks compatibility function(s). */ ++ ++unsigned int BcmHalMapInterrupt(FN_HANDLER pfunc, unsigned int param, ++ unsigned int interruptId) ++{ ++ int nRet = -1; ++ char *devname; ++ ++ devname = kmalloc(16, GFP_KERNEL); ++ if (devname) ++ sprintf( devname, "brcm_%d", interruptId ); ++ ++ /* Set the IRQ description to not automatically enable the interrupt at ++ * the end of an ISR. The driver that handles the interrupt must ++ * explicitly call BcmHalInterruptEnable or enable_brcm_irq. This behavior ++ * is consistent with interrupt handling on VxWorks. ++ */ ++ irq_desc[interruptId].handler = &brcm_irq_no_end_type; ++ ++ if( interruptId >= INTERNAL_ISR_TABLE_OFFSET ) ++ { ++ nRet = request_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT, ++ devname, (void *) param ); ++ } ++ else if (interruptId >= INTERRUPT_ID_EXTERNAL_0 && interruptId <= INTERRUPT_ID_EXTERNAL_3) ++ { ++ nRet = request_external_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT, ++ devname, (void *) param ); ++ } ++ ++ return( nRet ); ++} ++ ++ ++/* Debug function. */ ++ ++void dump_intr_regs(void) ++{ ++ printk("PERF->ExtIrqCfg [%08x]\n", *(&(PERF->ExtIrqCfg))); ++} ++ ++EXPORT_SYMBOL(enable_brcm_irq); ++EXPORT_SYMBOL(disable_brcm_irq); ++EXPORT_SYMBOL(request_external_irq); ++EXPORT_SYMBOL(BcmHalMapInterrupt); ++ +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/Kconfig linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/Kconfig +--- linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/Kconfig 2006-07-07 22:15:18.000000000 +0200 +@@ -0,0 +1,172 @@ ++# Kernel and Driver configuration for Broadcom Commengine ADSL board ++choice ++ prompt "Broadcom Commengine ADSL board" ++ depends on MIPS_BRCM ++ default BCM96345 ++ help ++ Select different Broadcom ADSL board ++ ++config BCM96338 ++ bool "96338 ADSL board" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ ++config BCM96345 ++ bool "96345 ADSL board" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ ++config BCM96348 ++ bool "96348 ADSL board" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ ++endchoice ++ ++config BCM_BOARD ++ bool "Support for Broadcom Board" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_SERIAL ++ bool "Support for Serial Port" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ENET ++ tristate "Support for Ethernet" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_USB ++ tristate "Support for USB" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_WLAN ++ tristate "Support for Wireless" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_PCI ++ bool "Support for PCI" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ select PCI ++ ++config BCM_ATMAPI ++ tristate "Support for ATM" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ATMTEST ++ tristate "Support for ATM Diagnostic" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ADSL ++ tristate "Support for ADSL" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ENDPOINT ++ tristate "Support for VOICE" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_PROCFS ++ tristate "Support for PROCFS" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_VDSL ++ tristate "Support for VDSL" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_SECURITY ++ tristate "Support for SECURITY" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_HPNA ++ tristate "Support for HPNA" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_BOARD_IMPL ++ int "Implementation index for ADSL Board" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_SERIAL_IMPL ++ int "Implementation index for Serial" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ENET_IMPL ++ int "Implementation index for Ethernet" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_USB_IMPL ++ int "Implementation index for USB" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_WLAN_IMPL ++ int "Implementation index for WIRELESS" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ATMAPI_IMPL ++ int "Implementation index for ATM" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ATMTEST_IMPL ++ int "Implementation index for ATM Diagnostic" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_BLAA_IMPL ++ int "Implementation index for BLAA" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ADSL_IMPL ++ int "Implementation index for ADSL" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ENDPOINT_IMPL ++ int "Implementation index for VOICE" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_PROCFS_IMPL ++ int "Implementation index for PROCFS" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_VDSL_IMPL ++ int "Implementation index for VDSL" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_SECURITY_IMPL ++ int "Implementation index for SECURITY" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_HPNA_IMPL ++ int "Implementation index for HPNA" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++choice ++ prompt "Root File System" ++ depends on MIPS_BRCM ++ default ROOTFS_SQUASHFS ++ help ++ Select root file system on the board flash. ++ ++config ROOTFS_SQUASHFS ++ bool "SQUASHFS" ++config ROOTFS_CRAMFS ++ bool "CRAMFS" ++config ROOTFS_JFFS2 ++ bool "JFFS2" ++config ROOTFS_NFS ++ bool "NFS" ++ ++endchoice ++ ++config ROOT_FLASHFS ++ string "flash partition" ++ depends on ROOTFS_SQUASHFS || ROOTFS_CRAMFS || ROOTFS_JFFS2 ++ default "root=31:0 ro noinitrd" if ROOTFS_SQUASHFS = y || ROOTFS_CRAMFS = y ++ default "root=31:2 ro noinitrd" if ROOTFS_JFFS2 = y ++ help ++ This is the root file system partition on flash memory ++ ++config ROOT_NFS_DIR ++ string "NFS server path" ++ depends on ROOTFS_NFS ++ default "/opt/bcm96338/targets/96338R/fs" if BCM96338 = y ++ default "/opt/bcm96345/targets/96345R/fs" if BCM96345 = y ++ default "/opt/bcm96348/targets/96348R/fs" if BCM96348 = y ++ help ++ This is the path of NFS server (host system) +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/Makefile linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/Makefile +--- linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/Makefile 2006-07-07 22:18:20.000000000 +0200 +@@ -0,0 +1,23 @@ ++# ++# Makefile for generic Broadcom MIPS boards ++# ++# Copyright (C) 2004 Broadcom Corporation ++# ++obj-y := irq.o prom.o setup.o time.o ser_init.o bcm63xx_flash.o bcm63xx_led.o board.o boardparms.o cfiflash.o ++ ++SRCBASE := $(TOPDIR) ++EXTRA_CFLAGS += -I$(SRCBASE)/include ++#EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -DDBG ++EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) ++ ++ ++ifeq "$(ADSL)" "ANNEX_B" ++EXTRA_CFLAGS += -DADSL_ANNEXB ++endif ++ifeq "$(ADSL)" "SADSL" ++EXTRA_CFLAGS += -DADSL_SADSL ++endif ++ifeq "$(ADSL)" "ANNEX_C" ++EXTRA_CFLAGS += -DADSL_ANNEXC ++endif ++ +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/prom.c linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/prom.c +--- linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/prom.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/prom.c 2006-07-07 22:15:18.000000000 +0200 +@@ -0,0 +1,236 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * prom.c: PROM library initialization code. ++ * ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include "boardparms.h" ++#include "softdsl/AdslCoreDefs.h" ++ ++ ++extern int do_syslog(int, char *, int); ++extern void serial_init(void); ++extern void __init InitNvramInfo( void ); ++/*extern void kerSysFlashInit( void );*/ ++/*extern unsigned long get_nvram_start_addr(void);*/ ++void __init create_root_nfs_cmdline( char *cmdline ); ++ ++#if defined(CONFIG_BCM96338) ++#define CPU_CLOCK 240000000 ++#define MACH_BCM MACH_BCM96338 ++#endif ++#if defined(CONFIG_BCM96345) ++#define CPU_CLOCK 140000000 ++#define MACH_BCM MACH_BCM96345 ++#endif ++#if defined(CONFIG_BCM96348) ++void __init calculateCpuSpeed(void); ++static unsigned long cpu_speed; ++#define CPU_CLOCK cpu_speed ++#define MACH_BCM MACH_BCM96348 ++#endif ++ ++const char *get_system_type(void) ++{/* ++ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); ++ ++ return( pNvramData->szBoardId );*/ ++ return "brcm63xx"; ++} ++ ++unsigned long getMemorySize(void) ++{ ++ unsigned long ulSdramType = BOARD_SDRAM_TYPE; ++ ++ unsigned long ulSdramSize; ++ ++ switch( ulSdramType ) ++ { ++ case BP_MEMORY_16MB_1_CHIP: ++ case BP_MEMORY_16MB_2_CHIP: ++ ulSdramSize = 16 * 1024 * 1024; ++ break; ++ case BP_MEMORY_32MB_1_CHIP: ++ case BP_MEMORY_32MB_2_CHIP: ++ ulSdramSize = 32 * 1024 * 1024; ++ break; ++ case BP_MEMORY_64MB_2_CHIP: ++ ulSdramSize = 64 * 1024 * 1024; ++ break; ++ default: ++ ulSdramSize = 8 * 1024 * 1024; ++ break; ++ } ++ ++ return ulSdramSize; ++} ++ ++/* -------------------------------------------------------------------------- ++ Name: prom_init ++ -------------------------------------------------------------------------- */ ++void __init prom_init(void) ++{ ++ extern ulong r4k_interval; ++ ++ serial_init(); ++ ++ /*kerSysFlashInit();*/ ++ ++ do_syslog(8, NULL, 8); ++ ++ printk( "%s prom init\n", get_system_type() ); ++ ++ PERF->IrqMask = 0; ++ ++ arcs_cmdline[0] = '\0'; ++#if 0 ++#if defined(CONFIG_ROOT_NFS) ++ create_root_nfs_cmdline( arcs_cmdline ); ++#endif ++#elif defined(CONFIG_ROOT_FLASHFS) ++ strcpy(arcs_cmdline, CONFIG_ROOT_FLASHFS); ++#endif ++ ++ add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); ++ ++#if defined(CONFIG_BCM96348) ++ calculateCpuSpeed(); ++#endif ++ /* Count register increments every other clock */ ++ r4k_interval = CPU_CLOCK / HZ / 2; ++ mips_hpt_frequency = CPU_CLOCK / 2; ++ ++ mips_machgroup = MACH_GROUP_BRCM; ++ mips_machtype = MACH_BCM; ++} ++ ++/* -------------------------------------------------------------------------- ++ Name: prom_free_prom_memory ++Abstract: ++ -------------------------------------------------------------------------- */ ++void __init prom_free_prom_memory(void) ++{ ++ ++} ++ ++#if 0 ++#if defined(CONFIG_ROOT_NFS) ++/* This function reads in a line that looks something like this: ++ * ++ * ++ * CFE bootline=bcmEnet(0,0)host:vmlinux e=192.169.0.100:ffffff00 h=192.169.0.1 ++ * ++ * ++ * and retuns in the cmdline parameter some that looks like this: ++ * ++ * CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/opt/targets/96345R/fs ++ * ip=192.168.0.100:192.168.0.1::255.255.255.0::eth0:off rw" ++ */ ++#define BOOT_LINE_ADDR 0x0 ++#define HEXDIGIT(d) ((d >= '0' && d <= '9') ? (d - '0') : ((d | 0x20) - 'W')) ++#define HEXBYTE(b) (HEXDIGIT((b)[0]) << 4) + HEXDIGIT((b)[1]) ++extern unsigned long get_nvram_start_addr(void); ++ ++void __init create_root_nfs_cmdline( char *cmdline ) ++{ ++ char root_nfs_cl[] = "root=/dev/nfs nfsroot=%s:" CONFIG_ROOT_NFS_DIR ++ " ip=%s:%s::%s::eth0:off rw"; ++ ++ char *localip = NULL; ++ char *hostip = NULL; ++ char mask[16] = ""; ++ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); ++ char bootline[128] = ""; ++ char *p = bootline; ++ ++ memcpy(bootline, pNvramData->szBootline, sizeof(bootline)); ++ while( *p ) ++ { ++ if( p[0] == 'e' && p[1] == '=' ) ++ { ++ /* Found local ip address */ ++ p += 2; ++ localip = p; ++ while( *p && *p != ' ' && *p != ':' ) ++ p++; ++ if( *p == ':' ) ++ { ++ /* Found network mask (eg FFFFFF00 */ ++ *p++ = '\0'; ++ sprintf( mask, "%u.%u.%u.%u", HEXBYTE(p), HEXBYTE(p + 2), ++ HEXBYTE(p + 4), HEXBYTE(p + 6) ); ++ p += 4; ++ } ++ else if( *p == ' ' ) ++ *p++ = '\0'; ++ } ++ else if( p[0] == 'h' && p[1] == '=' ) ++ { ++ /* Found host ip address */ ++ p += 2; ++ hostip = p; ++ while( *p && *p != ' ' ) ++ p++; ++ if( *p == ' ' ) ++ *p++ = '\0'; ++ } ++ else ++ p++; ++ } ++ ++ if( localip && hostip ) ++ sprintf( cmdline, root_nfs_cl, hostip, localip, hostip, mask ); ++} ++#endif ++#endif ++ ++#if defined(CONFIG_BCM96348) ++/* ********************************************************************* ++ * calculateCpuSpeed() ++ * Calculate the BCM6348 CPU speed by reading the PLL strap register ++ * and applying the following formula: ++ * cpu_clk = (.25 * 64MHz freq) * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) ++ * Input parameters: ++ * none ++ * Return value: ++ * none ++ ********************************************************************* */ ++void __init calculateCpuSpeed(void) ++{ ++ UINT32 pllStrap = PERF->PllStrap; ++ int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT; ++ int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT; ++ int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT; ++ ++ cpu_speed = (16 * (n1 + 1) * (n2 + 2) / (m1cpu + 1)) * 1000000; ++} ++#endif ++ +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/ser_init.c linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/ser_init.c +--- linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/ser_init.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/ser_init.c 2006-07-07 22:15:18.000000000 +0200 +@@ -0,0 +1,180 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * Broadcom bcm63xx serial port initialization, also prepare for printk ++ * by registering with console_init ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#define SER63XX_DEFAULT_BAUD 115200 ++#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH) ++#define stUart ((volatile Uart * const) UART_BASE) ++ ++// Transmit interrupts ++#define TXINT (TXFIFOEMT | TXUNDERR | TXOVFERR) ++// Receive interrupts ++#define RXINT (RXFIFONE | RXOVFERR) ++ ++/* -------------------------------------------------------------------------- ++ Name: serial_init ++ Purpose: Initalize the UART ++-------------------------------------------------------------------------- */ ++void __init serial_init(void) ++{ ++ UINT32 tmpVal = SER63XX_DEFAULT_BAUD; ++ ULONG clockFreqHz; ++ ++#if defined(CONFIG_BCM96345) ++ // Make sure clock is ticking ++ PERF->blkEnables |= UART_CLK_EN; ++#endif ++ ++ /* Dissable channel's receiver and transmitter. */ ++ stUart->control &= ~(BRGEN|TXEN|RXEN); ++ ++ /*--------------------------------------------------------------------*/ ++ /* Write the table value to the clock select register. */ ++ /* DPullen - this is the equation to use: */ ++ /* value = clockFreqHz / baud / 32-1; */ ++ /* (snmod) Actually you should also take into account any necessary */ ++ /* rounding. Divide by 16, look at lsb, if 0, divide by 2 */ ++ /* and subtract 1. If 1, just divide by 2 */ ++ /*--------------------------------------------------------------------*/ ++ clockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT; ++ tmpVal = (clockFreqHz / tmpVal) / 16; ++ if( tmpVal & 0x01 ) ++ tmpVal /= 2; //Rounding up, so sub is already accounted for ++ else ++ tmpVal = (tmpVal / 2) - 1; // Rounding down so we must sub 1 ++ stUart->baudword = tmpVal; ++ ++ /* Finally, re-enable the transmitter and receiver. */ ++ stUart->control |= (BRGEN|TXEN|RXEN); ++ ++ stUart->config = (BITS8SYM | ONESTOP); ++ // Set the FIFO interrupt depth ... stUart->fifocfg = 0xAA; ++ stUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS; ++ stUart->intMask = 0; ++ stUart->intMask = RXINT | TXINT; ++} ++ ++ ++/* prom_putc() ++ * Output a character to the UART ++ */ ++void prom_putc(char c) ++{ ++ /* Wait for Tx uffer to empty */ ++ while (! (READ16(stUart->intStatus) & TXFIFOEMT)); ++ /* Send character */ ++ stUart->Data = c; ++} ++ ++/* prom_puts() ++ * Write a string to the UART ++ */ ++void prom_puts(const char *s) ++{ ++ while (*s) { ++ if (*s == '\n') { ++ prom_putc('\r'); ++ } ++ prom_putc(*s++); ++ } ++} ++ ++ ++/* prom_getc_nowait() ++ * Returns a character from the UART ++ * Returns -1 if no characters available or corrupted ++ */ ++int prom_getc_nowait(void) ++{ ++ uint16 uStatus; ++ int cData = -1; ++ ++ uStatus = READ16(stUart->intStatus); ++ ++ if (uStatus & RXFIFONE) { /* Do we have a character? */ ++ cData = READ16(stUart->Data) & 0xff; /* Read character */ ++ if (uStatus & (RXFRAMERR | RXPARERR)) { /* If we got an error, throw it away */ ++ cData = -1; ++ } ++ } ++ ++ return cData; ++} ++ ++/* prom_getc() ++ * Returns a charcter from the serial port ++ * Will block until it receives a valid character ++*/ ++char prom_getc(void) ++{ ++ int cData = -1; ++ ++ /* Loop until we get a valid character */ ++ while(cData == -1) { ++ cData = prom_getc_nowait(); ++ } ++ return (char) cData; ++} ++ ++/* prom_testc() ++ * Returns 0 if no characters available ++ */ ++int prom_testc(void) ++{ ++ uint16 uStatus; ++ ++ uStatus = READ16(stUart->intStatus); ++ ++ return (uStatus & RXFIFONE); ++} ++ ++#if CONFIG_REMOTE_DEBUG ++/* Prevent other code from writing to the serial port */ ++void _putc(char c) { } ++void _puts(const char *ptr) { } ++#else ++/* Low level outputs call prom routines */ ++void _putc(char c) { ++ prom_putc(c); ++} ++void _puts(const char *ptr) { ++ prom_puts(ptr); ++} ++#endif +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/setup.c linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/setup.c +--- linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/setup.c 2006-07-07 22:15:18.000000000 +0200 +@@ -0,0 +1,523 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * Generic setup routines for Broadcom 963xx MIPS boards ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++extern void brcm_timer_setup(struct irqaction *irq); ++extern unsigned long getMemorySize(void); ++ ++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) ++#include ++#include ++#include ++#include ++ ++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); ++#endif ++ ++/* This function should be in a board specific directory. For now, ++ * assume that all boards that include this file use a Broadcom chip ++ * with a soft reset bit in the PLL control register. ++ */ ++static void brcm_machine_restart(char *command) ++{ ++ const unsigned long ulSoftReset = 0x00000001; ++ unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008; ++ *pulPllCtrl |= ulSoftReset; ++} ++ ++static void brcm_machine_halt(void) ++{ ++ printk("System halted\n"); ++ while (1); ++} ++ ++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) ++ ++static void mpi_SetLocalPciConfigReg(uint32 reg, uint32 value) ++{ ++ /* write index then value */ ++ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;; ++ mpi->pcicfgdata = value; ++} ++ ++static uint32 mpi_GetLocalPciConfigReg(uint32 reg) ++{ ++ /* write index then get value */ ++ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;; ++ return mpi->pcicfgdata; ++} ++ ++/* ++ * mpi_ResetPcCard: Set/Reset the PcCard ++ */ ++static void mpi_ResetPcCard(int cardtype, BOOL bReset) ++{ ++ if (cardtype == MPI_CARDTYPE_NONE) { ++ return; ++ } ++ ++ if (cardtype == MPI_CARDTYPE_CARDBUS) { ++ bReset = ! bReset; ++ } ++ ++ if (bReset) { ++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET); ++ } else { ++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 | PCCARD_CARD_RESET); ++ } ++} ++ ++/* ++ * mpi_ConfigCs: Configure an MPI/EBI chip select ++ */ ++static void mpi_ConfigCs(uint32 cs, uint32 base, uint32 size, uint32 flags) ++{ ++ mpi->cs[cs].base = ((base & 0x1FFFFFFF) | size); ++ mpi->cs[cs].config = flags; ++} ++ ++/* ++ * mpi_InitPcmciaSpace ++ */ ++static void mpi_InitPcmciaSpace(void) ++{ ++ // ChipSelect 4 controls PCMCIA Memory accesses ++ mpi_ConfigCs(PCMCIA_COMMON_BASE, pcmciaMem, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE)); ++ // ChipSelect 5 controls PCMCIA Attribute accesses ++ mpi_ConfigCs(PCMCIA_ATTRIBUTE_BASE, pcmciaAttr, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE)); ++ // ChipSelect 6 controls PCMCIA I/O accesses ++ mpi_ConfigCs(PCMCIA_IO_BASE, pcmciaIo, EBI_SIZE_64K, (EBI_WORD_WIDE|EBI_ENABLE)); ++ ++ mpi->pcmcia_cntl2 = ((PCMCIA_ATTR_ACTIVE << RW_ACTIVE_CNT_BIT) | ++ (PCMCIA_ATTR_INACTIVE << INACTIVE_CNT_BIT) | ++ (PCMCIA_ATTR_CE_SETUP << CE_SETUP_CNT_BIT) | ++ (PCMCIA_ATTR_CE_HOLD << CE_HOLD_CNT_BIT)); ++ ++ mpi->pcmcia_cntl2 |= (PCMCIA_HALFWORD_EN | PCMCIA_BYTESWAP_DIS); ++} ++ ++/* ++ * cardtype_vcc_detect: PC Card's card detect and voltage sense connection ++ * ++ * CD1#/ CD2#/ VS1#/ VS2#/ Card Initial Vcc ++ * CCD1# CCD2# CVS1 CVS2 Type ++ * ++ * GND GND open open 16-bit 5 vdc ++ * ++ * GND GND GND open 16-bit 3.3 vdc ++ * ++ * GND GND open GND 16-bit x.x vdc ++ * ++ * GND GND GND GND 16-bit 3.3 & x.x vdc ++ * ++ *==================================================================== ++ * ++ * CVS1 GND CCD1# open CardBus 3.3 vdc ++ * ++ * GND CVS2 open CCD2# CardBus x.x vdc ++ * ++ * GND CVS1 CCD2# open CardBus y.y vdc ++ * ++ * GND CVS2 GND CCD2# CardBus 3.3 & x.x vdc ++ * ++ * CVS2 GND open CCD1# CardBus x.x & y.y vdc ++ * ++ * GND CVS1 CCD2# open CardBus 3.3, x.x & y.y vdc ++ * ++ */ ++static int cardtype_vcc_detect(void) ++{ ++ uint32 data32; ++ int cardtype; ++ ++ cardtype = MPI_CARDTYPE_NONE; ++ mpi->pcmcia_cntl1 = 0x0000A000; // Turn on the output enables and drive ++ // the CVS pins to 0. ++ data32 = mpi->pcmcia_cntl1; ++ switch (data32 & 0x00000003) // Test CD1# and CD2#, see if card is plugged in. ++ { ++ case 0x00000003: // No Card is in the slot. ++ printk("mpi: No Card is in the PCMCIA slot\n"); ++ break; ++ ++ case 0x00000002: // Partial insertion, No CD2#. ++ printk("mpi: Card in the PCMCIA slot partial insertion, no CD2 signal\n"); ++ break; ++ ++ case 0x00000001: // Partial insertion, No CD1#. ++ printk("mpi: Card in the PCMCIA slot partial insertion, no CD1 signal\n"); ++ break; ++ ++ case 0x00000000: ++ mpi->pcmcia_cntl1 = 0x0000A0C0; // Turn off the CVS output enables and ++ // float the CVS pins. ++ mdelay(1); ++ data32 = mpi->pcmcia_cntl1; ++ // Read the Register. ++ switch (data32 & 0x0000000C) // See what is on the CVS pins. ++ { ++ case 0x00000000: // CVS1 and CVS2 are tied to ground, only 1 option. ++ printk("mpi: Detected 3.3 & x.x 16-bit PCMCIA card\n"); ++ cardtype = MPI_CARDTYPE_PCMCIA; ++ break; ++ ++ case 0x00000004: // CVS1 is open or tied to CCD1/CCD2 and CVS2 is tied to ground. ++ // 2 valid voltage options. ++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. ++ { ++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. ++ // This is not a valid combination. ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. ++ mpi->pcmcia_cntl1 = 0x0000A080; // Drive CVS1 to a 0. ++ mdelay(1); ++ data32 = mpi->pcmcia_cntl1; ++ if (data32 & 0x00000002) { // CCD2 is tied to CVS2, not valid. ++ printk("mpi: Unknown card plugged into slot\n"); ++ } else { // CCD2 is tied to CVS1. ++ printk("mpi: Detected 3.3, x.x and y.y Cardbus card\n"); ++ cardtype = MPI_CARDTYPE_CARDBUS; ++ } ++ break; ++ ++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. ++ // This is not a valid combination. ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ case 0x00000000: // CCD1 and CCD2 are tied to ground. ++ printk("mpi: Detected x.x vdc 16-bit PCMCIA card\n"); ++ cardtype = MPI_CARDTYPE_PCMCIA; ++ break; ++ } ++ break; ++ ++ case 0x00000008: // CVS2 is open or tied to CCD1/CCD2 and CVS1 is tied to ground. ++ // 2 valid voltage options. ++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. ++ { ++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. ++ // This is not a valid combination. ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. ++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. ++ mdelay(1); ++ data32 = mpi->pcmcia_cntl1; ++ if (data32 & 0x00000002) { // CCD2 is tied to CVS1, not valid. ++ printk("mpi: Unknown card plugged into slot\n"); ++ } else {// CCD2 is tied to CVS2. ++ printk("mpi: Detected 3.3 and x.x Cardbus card\n"); ++ cardtype = MPI_CARDTYPE_CARDBUS; ++ } ++ break; ++ ++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. ++ // This is not a valid combination. ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ case 0x00000000: // CCD1 and CCD2 are tied to ground. ++ cardtype = MPI_CARDTYPE_PCMCIA; ++ printk("mpi: Detected 3.3 vdc 16-bit PCMCIA card\n"); ++ break; ++ } ++ break; ++ ++ case 0x0000000C: // CVS1 and CVS2 are open or tied to CCD1/CCD2. ++ // 5 valid voltage options. ++ ++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. ++ { ++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. ++ // This is not a valid combination. ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. ++ // CCD1 is tied to ground. ++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. ++ mdelay(1); ++ data32 = mpi->pcmcia_cntl1; ++ if (data32 & 0x00000002) { // CCD2 is tied to CVS1. ++ printk("mpi: Detected y.y vdc Cardbus card\n"); ++ } else { // CCD2 is tied to CVS2. ++ printk("mpi: Detected x.x vdc Cardbus card\n"); ++ } ++ cardtype = MPI_CARDTYPE_CARDBUS; ++ break; ++ ++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. ++ // CCD2 is tied to ground. ++ ++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. ++ mdelay(1); ++ data32 = mpi->pcmcia_cntl1; ++ if (data32 & 0x00000001) {// CCD1 is tied to CVS1. ++ printk("mpi: Detected 3.3 vdc Cardbus card\n"); ++ } else { // CCD1 is tied to CVS2. ++ printk("mpi: Detected x.x and y.y Cardbus card\n"); ++ } ++ cardtype = MPI_CARDTYPE_CARDBUS; ++ break; ++ ++ case 0x00000000: // CCD1 and CCD2 are tied to ground. ++ cardtype = MPI_CARDTYPE_PCMCIA; ++ printk("mpi: Detected 5 vdc 16-bit PCMCIA card\n"); ++ break; ++ } ++ break; ++ ++ default: ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ } ++ } ++ return cardtype; ++} ++ ++/* ++ * mpi_DetectPcCard: Detect the plugged in PC-Card ++ * Return: < 0 => Unknown card detected ++ * 0 => No card detected ++ * 1 => 16-bit card detected ++ * 2 => 32-bit CardBus card detected ++ */ ++static int mpi_DetectPcCard(void) ++{ ++ int cardtype; ++ ++ cardtype = cardtype_vcc_detect(); ++ switch(cardtype) { ++ case MPI_CARDTYPE_PCMCIA: ++ mpi->pcmcia_cntl1 &= ~0x0000e000; // disable enable bits ++ //mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET); ++ mpi->pcmcia_cntl1 |= (PCMCIA_ENABLE | PCMCIA_GPIO_ENABLE); ++ mpi_InitPcmciaSpace(); ++ mpi_ResetPcCard(cardtype, FALSE); ++ // Hold card in reset for 10ms ++ mdelay(10); ++ mpi_ResetPcCard(cardtype, TRUE); ++ // Let card come out of reset ++ mdelay(100); ++ break; ++ case MPI_CARDTYPE_CARDBUS: ++ // 8 => CardBus Enable ++ // 1 => PCI Slot Number ++ // C => Float VS1 & VS2 ++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & 0xFFFF0000) | ++ CARDBUS_ENABLE | ++ (CARDBUS_SLOT << 8)| ++ VS2_OEN | ++ VS1_OEN; ++ /* access to this memory window will be to/from CardBus */ ++ mpi->l2pmremap1 |= CARDBUS_MEM; ++ ++ // Need to reset the Cardbus Card. There's no CardManager to do this, ++ // and we need to be ready for PCI configuration. ++ mpi_ResetPcCard(cardtype, FALSE); ++ // Hold card in reset for 10ms ++ mdelay(10); ++ mpi_ResetPcCard(cardtype, TRUE); ++ // Let card come out of reset ++ mdelay(100); ++ break; ++ default: ++ break; ++ } ++ return cardtype; ++} ++ ++static int mpi_init(void) ++{ ++ unsigned long data; ++ unsigned int chipid; ++ unsigned int chiprev; ++ unsigned int sdramsize; ++ ++ chipid = (PERF->RevID & 0xFFFF0000) >> 16; ++ chiprev = (PERF->RevID & 0xFF); ++ sdramsize = getMemorySize(); ++ /* ++ * Init the pci interface ++ */ ++ data = GPIO->GPIOMode; // GPIO mode register ++ data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus ++ GPIO->GPIOMode = data; // PCI internal arbiter ++ ++ /* ++ * In the BCM6348 CardBus support is defaulted to Slot 0 ++ * because there is no external IDSEL for CardBus. To disable ++ * the CardBus and allow a standard PCI card in Slot 0 ++ * set the cbus_idsel field to 0x1f. ++ */ ++ /* ++ uData = mpi->pcmcia_cntl1; ++ uData |= CARDBUS_IDSEL; ++ mpi->pcmcia_cntl1 = uData; ++ */ ++ // Setup PCI I/O Window range. Give 64K to PCI I/O ++ mpi->l2piorange = ~(BCM_PCI_IO_SIZE_64KB-1); ++ // UBUS to PCI I/O base address ++ mpi->l2piobase = BCM_PCI_IO_BASE & BCM_PCI_ADDR_MASK; ++ // UBUS to PCI I/O Window remap ++ mpi->l2pioremap = (BCM_PCI_IO_BASE | MEM_WINDOW_EN); ++ ++ // enable PCI related GPIO pins and data swap between system and PCI bus ++ mpi->locbuscntrl = (EN_PCI_GPIO | DIR_U2P_NOSWAP); ++ ++ /* Enable 6348 BusMaster and Memory access mode */ ++ data = mpi_GetLocalPciConfigReg(PCI_COMMAND); ++ data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); ++ mpi_SetLocalPciConfigReg(PCI_COMMAND, data); ++ ++ /* Configure two 16 MByte PCI to System memory regions. */ ++ /* These memory regions are used when PCI device is a bus master */ ++ /* Accesses to the SDRAM from PCI bus will be "byte swapped" for this region */ ++ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_3, BCM_HOST_MEM_SPACE1); ++ mpi->sp0remap = 0x0; ++ ++ /* Accesses to the SDRAM from PCI bus will not be "byte swapped" for this region */ ++ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_4, BCM_HOST_MEM_SPACE2); ++ mpi->sp1remap = 0x0; ++ mpi->pcimodesel |= (PCI_BAR2_NOSWAP | 0x40); ++ ++ if ((chipid == 0x6348) && (chiprev == 0xb0)) { ++ mpi->sp0range = ~(sdramsize-1); ++ mpi->sp1range = ~(sdramsize-1); ++ } ++ /* ++ * Change 6348 PCI Cfg Reg. offset 0x40 to PCI memory read retry count infinity ++ * by set 0 in bit 8~15. This resolve read Bcm4306 srom return 0xffff in ++ * first read. ++ */ ++ data = mpi_GetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER); ++ data &= ~BRCM_PCI_CONFIG_TIMER_RETRY_MASK; ++ data |= 0x00000080; ++ mpi_SetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER, data); ++ ++ /* enable pci interrupt */ ++ mpi->locintstat |= (EXT_PCI_INT << 16); ++ ++ mpi_DetectPcCard(); ++ ++ ioport_resource.start = BCM_PCI_IO_BASE; ++ ioport_resource.end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB; ++ ++#if defined(CONFIG_USB) ++ PERF->blkEnables |= USBH_CLK_EN; ++ mdelay(100); ++ *USBH_NON_OHCI = NON_OHCI_BYTE_SWAP; ++#endif ++ ++ return 0; ++} ++#endif ++ ++static int __init brcm63xx_setup(void) ++{ ++ extern int panic_timeout; ++ ++ _machine_restart = brcm_machine_restart; ++ _machine_halt = brcm_machine_halt; ++ pm_power_off = brcm_machine_halt; ++ ++ board_timer_setup = brcm_timer_setup; ++ ++ panic_timeout = 5; ++ ++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) ++ /* mpi initialization */ ++ mpi_init(); ++#endif ++ return 0; ++} ++ ++void plat_setup(void) ++{ ++ brcm63xx_setup(); ++} ++ ++/*************************************************************************** ++ * C++ New and delete operator functions ++ ***************************************************************************/ ++ ++/* void *operator new(unsigned int sz) */ ++void *_Znwj(unsigned int sz) ++{ ++ return( kmalloc(sz, GFP_KERNEL) ); ++} ++ ++/* void *operator new[](unsigned int sz)*/ ++void *_Znaj(unsigned int sz) ++{ ++ return( kmalloc(sz, GFP_KERNEL) ); ++} ++ ++/* placement new operator */ ++/* void *operator new (unsigned int size, void *ptr) */ ++void *ZnwjPv(unsigned int size, void *ptr) ++{ ++ return ptr; ++} ++ ++/* void operator delete(void *m) */ ++void _ZdlPv(void *m) ++{ ++ kfree(m); ++} ++ ++/* void operator delete[](void *m) */ ++void _ZdaPv(void *m) ++{ ++ kfree(m); ++} ++ ++EXPORT_SYMBOL(_Znwj); ++EXPORT_SYMBOL(_Znaj); ++EXPORT_SYMBOL(ZnwjPv); ++EXPORT_SYMBOL(_ZdlPv); ++EXPORT_SYMBOL(_ZdaPv); ++ +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/softdsl/AdslCoreDefs.h linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/softdsl/AdslCoreDefs.h +--- linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/softdsl/AdslCoreDefs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/softdsl/AdslCoreDefs.h 2006-07-07 22:15:18.000000000 +0200 +@@ -0,0 +1,2 @@ ++#define ADSL_SDRAM_IMAGE_SIZE (384*1024) ++ +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/time.c linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/time.c +--- linux-2.6.16.7/arch/mips/brcm-boards/bcm963xx/time.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/bcm963xx/time.c 2006-07-07 22:15:18.000000000 +0200 +@@ -0,0 +1,277 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * Setup time for Broadcom 963xx MIPS boards ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++unsigned long r4k_interval; /* Amount to increment compare reg each time */ ++static unsigned long r4k_cur; /* What counter should be at next timer irq */ ++ ++/* Cycle counter value at the previous timer interrupt.. */ ++static unsigned int timerhi = 0, timerlo = 0; ++ ++extern volatile unsigned long wall_jiffies; ++ ++/* Optional board-specific timer routine */ ++void (*board_timer_interrupt)(int irq, void *dev_id, struct pt_regs * regs); ++ ++static inline void ack_r4ktimer(unsigned long newval) ++{ ++ write_c0_compare(newval); ++} ++ ++/* ++ * There are a lot of conceptually broken versions of the MIPS timer interrupt ++ * handler floating around. This one is rather different, but the algorithm ++ * is provably more robust. ++ */ ++static irqreturn_t brcm_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ unsigned int count; ++ ++ if (r4k_interval == 0) ++ goto null; ++ ++ do { ++ do_timer(regs); ++ ++ if (board_timer_interrupt) ++ board_timer_interrupt(irq, dev_id, regs); ++ ++ r4k_cur += r4k_interval; ++ ack_r4ktimer(r4k_cur); ++ ++ } while (((count = (unsigned long)read_c0_count()) ++ - r4k_cur) < 0x7fffffff); ++ ++ if (!jiffies) { ++ /* ++ * If jiffies has overflowed in this timer_interrupt we must ++ * update the timer[hi]/[lo] to make do_fast_gettimeoffset() ++ * quotient calc still valid. -arca ++ */ ++ timerhi = timerlo = 0; ++ } else { ++ /* ++ * The cycle counter is only 32 bit which is good for about ++ * a minute at current count rates of upto 150MHz or so. ++ */ ++ timerhi += (count < timerlo); /* Wrap around */ ++ timerlo = count; ++ } ++ ++ return IRQ_HANDLED; ++ ++null: ++ ack_r4ktimer(0); ++ return IRQ_NONE; ++} ++ ++static struct irqaction brcm_timer_action = { ++ .handler = brcm_timer_interrupt, ++ .flags = SA_INTERRUPT, ++ .mask = CPU_MASK_NONE, ++ .name = "timer", ++ .next = NULL, ++ .dev_id = brcm_timer_interrupt, ++}; ++ ++ ++void __init brcm_timer_setup(struct irqaction *irq) ++{ ++ r4k_cur = (read_c0_count() + r4k_interval); ++ write_c0_compare(r4k_cur); ++ ++ /* we are using the cpu counter for timer interrupts */ ++ irq->handler = no_action; /* we use our own handler */ ++ setup_irq(MIPS_TIMER_INT, &brcm_timer_action); ++ set_c0_status(IE_IRQ5); ++} ++ ++#if 0 ++/* This is for machines which generate the exact clock. */ ++#define USECS_PER_JIFFY (1000000/HZ) ++#define USECS_PER_JIFFY_FRAC (0x100000000*1000000/HZ&0xffffffff) ++ ++static void call_do_div64_32( unsigned long *res, unsigned int high, ++ unsigned int low, unsigned long base ) ++{ ++ do_div64_32(*res, high, low, base); ++} ++ ++/* ++ * FIXME: Does playing with the RP bit in c0_status interfere with this code? ++ */ ++static unsigned long do_fast_gettimeoffset(void) ++{ ++ u32 count; ++ unsigned long res, tmp; ++ ++ /* Last jiffy when do_fast_gettimeoffset() was called. */ ++ static unsigned long last_jiffies=0; ++ unsigned long quotient; ++ ++ /* ++ * Cached "1/(clocks per usec)*2^32" value. ++ * It has to be recalculated once each jiffy. ++ */ ++ static unsigned long cached_quotient=0; ++ ++ tmp = jiffies; ++ ++ quotient = cached_quotient; ++ ++ if (tmp && last_jiffies != tmp) { ++ last_jiffies = tmp; ++#ifdef CONFIG_CPU_MIPS32 ++ if (last_jiffies != 0) { ++ ++ unsigned long r0; ++ /* gcc 3.0.1 gets an internal compiler error if there are two ++ * do_div64_32 inline macros. To work around this problem, ++ * do_div64_32 is called as a function. ++ */ ++ call_do_div64_32(&r0, timerhi, timerlo, tmp); ++ call_do_div64_32("ient, USECS_PER_JIFFY, ++ USECS_PER_JIFFY_FRAC, r0); ++ ++ cached_quotient = quotient; ++ ++ } ++#else ++ __asm__(".set\tnoreorder\n\t" ++ ".set\tnoat\n\t" ++ ".set\tmips3\n\t" ++ "lwu\t%0,%2\n\t" ++ "dsll32\t$1,%1,0\n\t" ++ "or\t$1,$1,%0\n\t" ++ "ddivu\t$0,$1,%3\n\t" ++ "mflo\t$1\n\t" ++ "dsll32\t%0,%4,0\n\t" ++ "nop\n\t" ++ "ddivu\t$0,%0,$1\n\t" ++ "mflo\t%0\n\t" ++ ".set\tmips0\n\t" ++ ".set\tat\n\t" ++ ".set\treorder" ++ :"=&r" (quotient) ++ :"r" (timerhi), ++ "m" (timerlo), ++ "r" (tmp), ++ "r" (USECS_PER_JIFFY) ++ :"$1"); ++ cached_quotient = quotient; ++#endif ++ } ++ ++ /* Get last timer tick in absolute kernel time */ ++ count = read_c0_count(); ++ ++ /* .. relative to previous jiffy (32 bits is enough) */ ++ count -= timerlo; ++ ++ __asm__("multu\t%1,%2\n\t" ++ "mfhi\t%0" ++ :"=r" (res) ++ :"r" (count), ++ "r" (quotient)); ++ ++ /* ++ * Due to possible jiffies inconsistencies, we need to check ++ * the result so that we'll get a timer that is monotonic. ++ */ ++ if (res >= USECS_PER_JIFFY) ++ res = USECS_PER_JIFFY-1; ++ ++ return res; ++} ++ ++void do_gettimeofday(struct timeval *tv) ++{ ++ unsigned int flags; ++ ++ read_lock_irqsave (&xtime_lock, flags); ++ tv->tv_sec = xtime.tv_sec; ++ tv->tv_usec = xtime.tv_nsec/1000; ++ tv->tv_usec += do_fast_gettimeoffset(); ++ ++ /* ++ * xtime is atomically updated in timer_bh. jiffies - wall_jiffies ++ * is nonzero if the timer bottom half hasnt executed yet. ++ */ ++ if (jiffies - wall_jiffies) ++ tv->tv_usec += USECS_PER_JIFFY; ++ ++ read_unlock_irqrestore (&xtime_lock, flags); ++ ++ if (tv->tv_usec >= 1000000) { ++ tv->tv_usec -= 1000000; ++ tv->tv_sec++; ++ } ++} ++ ++EXPORT_SYMBOL(do_gettimeofday); ++ ++int do_settimeofday(struct timespec *tv) ++{ ++ write_lock_irq (&xtime_lock); ++ ++ /* This is revolting. We need to set the xtime.tv_usec correctly. ++ * However, the value in this location is is value at the last tick. ++ * Discover what correction gettimeofday would have done, and then ++ * undo it! ++ */ ++ tv->tv_nsec -= do_fast_gettimeoffset()*NSEC_PER_USEC; ++ ++ if (tv->tv_nsec < 0) { ++ tv->tv_nsec += 1000000*NSEC_PER_USEC; ++ tv->tv_sec--; ++ } ++ ++ xtime.tv_sec = tv->tv_sec; ++ xtime.tv_nsec = tv->tv_nsec; ++ time_adjust = 0; /* stop active adjtime() */ ++ time_status |= STA_UNSYNC; ++ time_maxerror = NTP_PHASE_LIMIT; ++ time_esterror = NTP_PHASE_LIMIT; ++ ++ write_unlock_irq (&xtime_lock); ++} ++ ++EXPORT_SYMBOL(do_settimeofday); ++ ++#endif +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/generic/dbg_io.c linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/generic/dbg_io.c +--- linux-2.6.16.7/arch/mips/brcm-boards/generic/dbg_io.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/generic/dbg_io.c 2006-07-07 22:15:18.000000000 +0200 +@@ -0,0 +1,260 @@ ++/* ++<:copyright-gpl ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#undef PRNT /* define for debug printing */ ++ ++#define UART16550_BAUD_2400 2400 ++#define UART16550_BAUD_4800 4800 ++#define UART16550_BAUD_9600 9600 ++#define UART16550_BAUD_19200 19200 ++#define UART16550_BAUD_38400 38400 ++#define UART16550_BAUD_57600 57600 ++#define UART16550_BAUD_115200 115200 ++ ++#define UART16550_PARITY_NONE 0 ++#define UART16550_PARITY_ODD 0x08 ++#define UART16550_PARITY_EVEN 0x18 ++#define UART16550_PARITY_MARK 0x28 ++#define UART16550_PARITY_SPACE 0x38 ++ ++#define UART16550_DATA_5BIT 0x0 ++#define UART16550_DATA_6BIT 0x1 ++#define UART16550_DATA_7BIT 0x2 ++#define UART16550_DATA_8BIT 0x3 ++ ++#define UART16550_STOP_1BIT 0x0 ++#define UART16550_STOP_2BIT 0x4 ++ ++volatile Uart * stUart = UART_BASE; ++ ++#define WRITE16(addr, value) ((*(volatile UINT16 *)((ULONG)&addr)) = value) ++ ++/* Low level UART routines from promcon.c */ ++extern void prom_putc(char c); ++extern char prom_getc(void); ++extern int prom_getc_nowait(void); ++extern int prom_testc(void); ++ ++extern void set_debug_traps(void); ++extern void breakpoint(void); ++extern void enable_brcm_irq(unsigned int); ++extern void set_async_breakpoint(unsigned int epc); ++ ++#ifdef CONFIG_GDB_CONSOLE ++extern void register_gdb_console(void); ++#endif ++ ++int gdb_initialized = 0; ++ ++#define GDB_BUF_SIZE 512 /* power of 2, please */ ++ ++static char gdb_buf[GDB_BUF_SIZE] ; ++static int gdb_buf_in_inx ; ++static atomic_t gdb_buf_in_cnt ; ++static int gdb_buf_out_inx ; ++ ++void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) ++{ ++ /* Do nothing, assume boot loader has already set up serial port */ ++ printk("debugInit called\n"); ++} ++ ++/* ++ * Get a char if available, return -1 if nothing available. ++ * Empty the receive buffer first, then look at the interface hardware. ++ */ ++static int read_char(void) ++{ ++ if (atomic_read(&gdb_buf_in_cnt) != 0) /* intr routine has q'd chars */ ++ { ++ int chr ; ++ ++ chr = gdb_buf[gdb_buf_out_inx++] ; ++ gdb_buf_out_inx &= (GDB_BUF_SIZE - 1) ; ++ atomic_dec(&gdb_buf_in_cnt) ; ++ return(chr) ; ++ } ++ return(prom_getc_nowait()) ; /* read from hardware */ ++} /* read_char */ ++ ++/* ++ * This is the receiver interrupt routine for the GDB stub. ++ * It will receive a limited number of characters of input ++ * from the gdb host machine and save them up in a buffer. ++ * ++ * When the gdb stub routine getDebugChar() is called it ++ * draws characters out of the buffer until it is empty and ++ * then reads directly from the serial port. ++ * ++ * We do not attempt to write chars from the interrupt routine ++ * since the stubs do all of that via putDebugChar() which ++ * writes one byte after waiting for the interface to become ++ * ready. ++ * ++ * The debug stubs like to run with interrupts disabled since, ++ * after all, they run as a consequence of a breakpoint in ++ * the kernel. ++ * ++ * Perhaps someone who knows more about the tty driver than I ++ * care to learn can make this work for any low level serial ++ * driver. ++ */ ++static void gdb_interrupt(int irq, void *dev_id, struct pt_regs * regs) ++{ ++ int chr ; ++ int more; ++ do ++ { ++ chr = prom_getc_nowait() ; ++ more = prom_testc(); ++ if (chr < 0) continue ; ++ ++ /* If we receive a Ctrl-C then this is GDB trying to break in */ ++ if (chr == 3) ++ { ++ /* Replace current instruction with breakpoint */ ++ set_async_breakpoint(regs->cp0_epc); ++ //breakpoint(); ++ } ++ ++#ifdef PRNT ++ printk("gdb_interrupt: chr=%02x '%c', more = %x\n", ++ chr, chr > ' ' && chr < 0x7F ? chr : ' ', more) ; ++#endif ++ ++ if (atomic_read(&gdb_buf_in_cnt) >= GDB_BUF_SIZE) ++ { /* buffer overflow, clear it */ ++ gdb_buf_in_inx = 0 ; ++ atomic_set(&gdb_buf_in_cnt, 0) ; ++ gdb_buf_out_inx = 0 ; ++ break ; ++ } ++ ++ gdb_buf[gdb_buf_in_inx++] = chr ; ++ gdb_buf_in_inx &= (GDB_BUF_SIZE - 1) ; ++ atomic_inc(&gdb_buf_in_cnt) ; ++ } ++ while (more !=0); ++ ++} /* gdb_interrupt */ ++ ++/* ++ * getDebugChar ++ * ++ * This is a GDB stub routine. It waits for a character from the ++ * serial interface and then returns it. If there is no serial ++ * interface connection then it returns a bogus value which will ++ * almost certainly cause the system to hang. ++ */ ++int getDebugChar(void) ++{ ++ volatile int chr ; ++ ++#ifdef PRNT ++ printk("getDebugChar: ") ; ++#endif ++ ++ while ( (chr = read_char()) < 0 ) ; ++ ++#ifdef PRNT ++ printk("%c\n", chr > ' ' && chr < 0x7F ? chr : ' ') ; ++#endif ++ return(chr) ; ++ ++} /* getDebugChar */ ++ ++/* ++ * putDebugChar ++ * ++ * This is a GDB stub routine. It waits until the interface is ready ++ * to transmit a char and then sends it. If there is no serial ++ * interface connection then it simply returns to its caller, having ++ * pretended to send the char. ++ */ ++int putDebugChar(unsigned char chr) ++{ ++#ifdef PRNT ++ printk("putDebugChar: chr=%02x '%c'\n", chr, ++ chr > ' ' && chr < 0x7F ? chr : ' ') ; ++#endif ++ ++ prom_putc(chr) ; /* this routine will wait */ ++ return 1; ++ ++} /* putDebugChar */ ++ ++/* Just a NULL routine for testing. */ ++void gdb_null(void) ++{ ++} ++ ++void rs_kgdb_hook(int tty_no) ++{ ++ printk("rs_kgdb_hook: tty %d\n", tty_no); ++ ++ /* Call GDB routine to setup the exception vectors for the debugger */ ++ set_debug_traps(); ++ ++ printk("Breaking into debugger...\n"); ++ breakpoint(); ++ gdb_null() ; ++ printk("Connected.\n"); ++ ++ gdb_initialized = 1; ++ ++#ifdef CONFIG_GDB_CONSOLE ++ register_gdb_console(); ++#endif ++} ++ ++void kgdb_hook_irq() ++{ ++ int retval ; ++ uint16 uMask; ++ ++ printk("GDB: Hooking UART interrupt\n"); ++ ++ retval = request_irq(INTERRUPT_ID_UART, ++ gdb_interrupt, ++ SA_INTERRUPT, ++ "GDB-stub", NULL); ++ ++ if (retval != 0) ++ printk("gdb_hook: request_irq(irq=%d) failed: %d\n", INTERRUPT_ID_UART, retval); ++ ++ // Enable UART config Rx not empty IRQ ++ uMask = READ16(stUart->intMask) ; ++ // printk("intMask: 0x%x\n", uMask); ++ WRITE16(stUart->intMask, uMask | RXFIFONE); ++} ++ ++ +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/generic/int-handler.S linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/generic/int-handler.S +--- linux-2.6.16.7/arch/mips/brcm-boards/generic/int-handler.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/generic/int-handler.S 2006-07-07 22:15:18.000000000 +0200 +@@ -0,0 +1,59 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * Generic interrupt handler for Broadcom MIPS boards ++ */ ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++/* ++ * MIPS IRQ Source ++ * -------- ------ ++ * 0 Software (ignored) ++ * 1 Software (ignored) ++ * 2 Combined hardware interrupt (hw0) ++ * 3 Hardware ++ * 4 Hardware ++ * 5 Hardware ++ * 6 Hardware ++ * 7 R4k timer ++ */ ++ ++ .text ++ .set noreorder ++ .set noat ++ .align 5 ++ NESTED(brcmIRQ, PT_SIZE, sp) ++ SAVE_ALL ++ CLI ++ .set noreorder ++ .set at ++ ++ jal brcm_irq_dispatch ++ move a0, sp ++ ++ j ret_from_irq ++ nop ++ ++ END(brcmIRQ) +diff -urN linux-2.6.16.7/arch/mips/brcm-boards/generic/Makefile linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/generic/Makefile +--- linux-2.6.16.7/arch/mips/brcm-boards/generic/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/arch/mips/brcm-boards/generic/Makefile 2006-07-07 22:15:18.000000000 +0200 +@@ -0,0 +1,11 @@ ++# ++# Makefile for generic Broadcom MIPS boards ++# ++# Copyright (C) 2001 Broadcom Corporation ++# ++obj-y := int-handler.o ++ ++ifdef CONFIG_REMOTE_DEBUG ++obj-y += dbg_io.o ++endif ++ diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/002-pci_bcm96348.patch b/openwrt/target/linux/brcm63xx-2.6/patches/002-pci_bcm96348.patch new file mode 100644 index 0000000000..7d0936cb83 --- /dev/null +++ b/openwrt/target/linux/brcm63xx-2.6/patches/002-pci_bcm96348.patch @@ -0,0 +1,438 @@ +diff -Naurp linux-2.6.16.7-generic-patched/arch/mips/pci/Makefile linux-2.6.16.7-patched/arch/mips/pci/Makefile +--- linux-2.6.16.7-generic-patched/arch/mips/pci/Makefile 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7-patched/arch/mips/pci/Makefile 2006-07-05 15:21:58.000000000 +0200 +@@ -18,6 +18,7 @@ obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o + obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o + obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o + obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o ++obj-$(CONFIG_BCM_PCI) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o + + # + # These are still pretty much in the old state, watch, go blind. +diff -Naurp linux-2.6.16.7-generic-patched/arch/mips/pci/fixup-bcm96348.c linux-2.6.16.7-patched/arch/mips/pci/fixup-bcm96348.c +--- linux-2.6.16.7-generic-patched/arch/mips/pci/fixup-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/arch/mips/pci/fixup-bcm96348.c 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,85 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); ++ ++static char irq_tab_bcm96348[] __initdata = { ++ [0] = INTERRUPT_ID_MPI, ++ [1] = INTERRUPT_ID_MPI, ++#if defined(CONFIG_USB) ++ [USB_HOST_SLOT] = INTERRUPT_ID_USBH ++#endif ++}; ++ ++int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ return irq_tab_bcm96348[slot]; ++} ++ ++static void bcm96348_fixup(struct pci_dev *dev) ++{ ++ uint32 memaddr; ++ uint32 size; ++ ++ memaddr = pci_resource_start(dev, 0); ++ size = pci_resource_len(dev, 0); ++ ++ switch (PCI_SLOT(dev->devfn)) { ++ case 0: ++ // UBUS to PCI address range ++ // Memory Window 1. Mask determines which bits are decoded. ++ mpi->l2pmrange1 = ~(size-1); ++ // UBUS to PCI Memory base address. This is akin to the ChipSelect base ++ // register. ++ mpi->l2pmbase1 = memaddr & BCM_PCI_ADDR_MASK; ++ // UBUS to PCI Remap Address. Replaces the masked address bits in the ++ // range register with this setting. ++ // Also, enable direct I/O and direct Memory accesses ++ mpi->l2pmremap1 = (memaddr | MEM_WINDOW_EN); ++ break; ++ ++ case 1: ++ // Memory Window 2 ++ mpi->l2pmrange2 = ~(size-1); ++ // UBUS to PCI Memory base address. ++ mpi->l2pmbase2 = memaddr & BCM_PCI_ADDR_MASK; ++ // UBUS to PCI Remap Address ++ mpi->l2pmremap2 = (memaddr | MEM_WINDOW_EN); ++ break; ++ ++#if defined(CONFIG_USB) ++ case USB_HOST_SLOT: ++ dev->resource[0].start = USB_HOST_BASE; ++ dev->resource[0].end = USB_HOST_BASE+USB_BAR0_MEM_SIZE-1; ++ break; ++#endif ++ } ++} ++ ++struct pci_fixup pcibios_fixups[] = { ++ { PCI_FIXUP_FINAL, PCI_ANY_ID, PCI_ANY_ID, bcm96348_fixup }, ++ {0} ++}; +diff -Naurp linux-2.6.16.7-generic-patched/arch/mips/pci/ops-bcm96348.c linux-2.6.16.7-patched/arch/mips/pci/ops-bcm96348.c +--- linux-2.6.16.7-generic-patched/arch/mips/pci/ops-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/arch/mips/pci/ops-bcm96348.c 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,276 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++ ++#if defined(CONFIG_USB) ++#if 0 ++#define DPRINT(x...) printk(x) ++#else ++#define DPRINT(x...) ++#endif ++ ++static int ++pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size); ++static int ++pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size); ++ ++static bool usb_mem_size_rd = FALSE; ++static uint32 usb_mem_base = 0; ++static uint32 usb_cfg_space_cmd_reg = 0; ++#endif ++static bool pci_mem_size_rd = FALSE; ++ ++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); ++ ++static void mpi_SetupPciConfigAccess(uint32 addr) ++{ ++ mpi->l2pcfgctl = (DIR_CFG_SEL | DIR_CFG_USEREG | addr) & ~CONFIG_TYPE; ++} ++ ++static void mpi_ClearPciConfigAccess(void) ++{ ++ mpi->l2pcfgctl = 0x00000000; ++} ++ ++#if defined(CONFIG_USB) ++/* -------------------------------------------------------------------------- ++ Name: pci63xx_int_write ++Abstract: PCI Config write on internal device(s) ++ -------------------------------------------------------------------------- */ ++static int ++pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size) ++{ ++ if (PCI_SLOT(devfn) != USB_HOST_SLOT) { ++ return PCIBIOS_SUCCESSFUL; ++ } ++ ++ switch (size) { ++ case 1: ++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %02X\n", ++ PCI_SLOT(devfn), where, size, *value); ++ break; ++ case 2: ++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %04X\n", ++ PCI_SLOT(devfn), where, size, *value); ++ switch (where) { ++ case PCI_COMMAND: ++ usb_cfg_space_cmd_reg = *value; ++ break; ++ default: ++ break; ++ } ++ break; ++ case 4: ++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %08lX\n", ++ PCI_SLOT(devfn), where, size, *value); ++ switch (where) { ++ case PCI_BASE_ADDRESS_0: ++ if (*value == 0xffffffff) { ++ usb_mem_size_rd = TRUE; ++ } else { ++ usb_mem_base = *value; ++ } ++ break; ++ default: ++ break; ++ } ++ break; ++ default: ++ break; ++ } ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++/* -------------------------------------------------------------------------- ++ Name: pci63xx_int_read ++Abstract: PCI Config read on internal device(s) ++ -------------------------------------------------------------------------- */ ++static int ++pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size) ++{ ++ uint32 retValue = 0xFFFFFFFF; ++ ++ if (PCI_SLOT(devfn) != USB_HOST_SLOT) { ++ return PCIBIOS_SUCCESSFUL; ++ } ++ ++ // For now, this is specific to the USB Host controller. We can ++ // make it more general if we have to... ++ // Emulate PCI Config accesses ++ switch (where) { ++ case PCI_VENDOR_ID: ++ case PCI_DEVICE_ID: ++ retValue = PCI_VENDOR_ID_BROADCOM | 0x63000000; ++ break; ++ case PCI_COMMAND: ++ case PCI_STATUS: ++ retValue = (0x0006 << 16) | usb_cfg_space_cmd_reg; ++ break; ++ case PCI_CLASS_REVISION: ++ case PCI_CLASS_DEVICE: ++ retValue = (PCI_CLASS_SERIAL_USB << 16) | (0x10 << 8) | 0x01; ++ break; ++ case PCI_BASE_ADDRESS_0: ++ if (usb_mem_size_rd) { ++ retValue = USB_BAR0_MEM_SIZE; ++ } else { ++ if (usb_mem_base != 0) ++ retValue = usb_mem_base; ++ else ++ retValue = USB_HOST_BASE; ++ } ++ usb_mem_size_rd = FALSE; ++ break; ++ case PCI_CACHE_LINE_SIZE: ++ case PCI_LATENCY_TIMER: ++ retValue = 0; ++ break; ++ case PCI_HEADER_TYPE: ++ retValue = PCI_HEADER_TYPE_NORMAL; ++ break; ++ case PCI_SUBSYSTEM_VENDOR_ID: ++ retValue = PCI_VENDOR_ID_BROADCOM; ++ break; ++ case PCI_SUBSYSTEM_ID: ++ retValue = 0x6300; ++ break; ++ case PCI_INTERRUPT_LINE: ++ retValue = INTERRUPT_ID_USBH; ++ break; ++ default: ++ break; ++ } ++ ++ switch (size) { ++ case 1: ++ *value = (retValue >> ((where & 3) << 3)) & 0xff; ++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %02X\n", ++ PCI_SLOT(devfn), where, size, *value); ++ break; ++ case 2: ++ *value = (retValue >> ((where & 3) << 3)) & 0xffff; ++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %04X\n", ++ PCI_SLOT(devfn), where, size, *value); ++ break; ++ case 4: ++ *value = retValue; ++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %08lX\n", ++ PCI_SLOT(devfn), where, size, *value); ++ break; ++ default: ++ break; ++ } ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++#endif ++ ++static int bcm96348_pcibios_read(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 * val) ++{ ++ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1); ++ uint32 data; ++ ++#if defined(CONFIG_USB) ++ if (PCI_SLOT(devfn) == USB_HOST_SLOT) ++ return pci63xx_int_read(devfn, where, val, size); ++#endif ++ ++ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where)); ++ data = *(uint32 *)ioBase; ++ switch(size) { ++ case 1: ++ *val = (data >> ((where & 3) << 3)) & 0xff; ++ break; ++ case 2: ++ *val = (data >> ((where & 3) << 3)) & 0xffff; ++ break; ++ case 4: ++ *val = data; ++ /* Special case for reading PCI device range */ ++ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) { ++ if (pci_mem_size_rd) { ++ /* bcm6348 PCI memory window minimum size is 64K */ ++ *val &= PCI_SIZE_64K; ++ } ++ } ++ break; ++ default: ++ break; ++ } ++ pci_mem_size_rd = FALSE; ++ mpi_ClearPciConfigAccess(); ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static int bcm96348_pcibios_write(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 val) ++{ ++ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1); ++ uint32 data; ++ ++#if defined(CONFIG_USB) ++ if (PCI_SLOT(devfn) == USB_HOST_SLOT) ++ return pci63xx_int_write(devfn, where, &val, size); ++#endif ++ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where)); ++ data = *(uint32 *)ioBase; ++ switch(size) { ++ case 1: ++ data = (data & ~(0xff << ((where & 3) << 3))) | ++ (val << ((where & 3) << 3)); ++ break; ++ case 2: ++ data = (data & ~(0xffff << ((where & 3) << 3))) | ++ (val << ((where & 3) << 3)); ++ break; ++ case 4: ++ data = val; ++ /* Special case for reading PCI device range */ ++ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) { ++ if (val == 0xffffffff) ++ pci_mem_size_rd = TRUE; ++ } ++ break; ++ default: ++ break; ++ } ++ *(uint32 *)ioBase = data; ++ udelay(500); ++ mpi_ClearPciConfigAccess(); ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++struct pci_ops bcm96348_pci_ops = { ++ .read = bcm96348_pcibios_read, ++ .write = bcm96348_pcibios_write ++}; +diff -Naurp linux-2.6.16.7-generic-patched/arch/mips/pci/pci-bcm96348.c linux-2.6.16.7-patched/arch/mips/pci/pci-bcm96348.c +--- linux-2.6.16.7-generic-patched/arch/mips/pci/pci-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/arch/mips/pci/pci-bcm96348.c 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,54 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++static struct resource bcm_pci_io_resource = { ++ .name = "bcm96348 pci IO space", ++ .start = BCM_PCI_IO_BASE, ++ .end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB - 1, ++ .flags = IORESOURCE_IO ++}; ++ ++static struct resource bcm_pci_mem_resource = { ++ .name = "bcm96348 pci memory space", ++ .start = BCM_PCI_MEM_BASE, ++ .end = BCM_PCI_MEM_BASE + BCM_PCI_MEM_SIZE_16MB - 1, ++ .flags = IORESOURCE_MEM ++}; ++ ++extern struct pci_ops bcm96348_pci_ops; ++ ++struct pci_controller bcm96348_controller = { ++ .pci_ops = &bcm96348_pci_ops, ++ .io_resource = &bcm_pci_io_resource, ++ .mem_resource = &bcm_pci_mem_resource, ++}; ++ ++static void bcm96348_pci_init(void) ++{ ++ register_pci_controller(&bcm96348_controller); ++} ++ ++arch_initcall(bcm96348_pci_init); diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/010-include_asm_mips.patch b/openwrt/target/linux/brcm63xx-2.6/patches/010-include_asm_mips.patch new file mode 100644 index 0000000000..e413acff8a --- /dev/null +++ b/openwrt/target/linux/brcm63xx-2.6/patches/010-include_asm_mips.patch @@ -0,0 +1,77 @@ +diff -Naurp -x mach-bcm963xx linux-2.6.16.7-generic-patched/include/asm-mips/bootinfo.h linux-2.6.16.7-patched/include/asm-mips/bootinfo.h +--- linux-2.6.16.7-generic-patched/include/asm-mips/bootinfo.h 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7-patched/include/asm-mips/bootinfo.h 2006-07-05 15:21:58.000000000 +0200 +@@ -218,6 +218,15 @@ + #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */ + #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ + ++/* ++ * Valid machtype for group BRCM ++ */ ++#define MACH_GROUP_BRCM 23 /* Broadcom boards */ ++#define MACH_BCM96338 0 ++#define MACH_BCM96345 1 ++#define MACH_BCM96348 2 ++ ++ + #define CL_SIZE COMMAND_LINE_SIZE + + const char *get_system_type(void); +diff -Naurp -x mach-bcm963xx linux-2.6.16.7-generic-patched/include/asm-mips/cpu.h linux-2.6.16.7-patched/include/asm-mips/cpu.h +--- linux-2.6.16.7-generic-patched/include/asm-mips/cpu.h 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7-patched/include/asm-mips/cpu.h 2006-07-05 15:21:58.000000000 +0200 +@@ -102,6 +102,15 @@ + #define PRID_IMP_SR71000 0x0400 + + /* ++ * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM ++ */ ++ ++#define PRID_IMP_BCM6338 0x9000 ++#define PRID_IMP_BCM6345 0x8000 ++#define PRID_IMP_BCM6348 0x9100 ++ ++ ++/* + * Definitions for 7:0 on legacy processors + */ + +@@ -196,7 +205,10 @@ + #define CPU_34K 60 + #define CPU_PR4450 61 + #define CPU_SB1A 62 +-#define CPU_LAST 62 ++#define CPU_BCM6338 63 ++#define CPU_BCM6345 64 ++#define CPU_BCM6348 65 ++#define CPU_LAST 65 + + /* + * ISA Level encodings +diff -Naurp -x mach-bcm963xx linux-2.6.16.7-generic-patched/include/asm-mips/mach-generic/param.h linux-2.6.16.7-patched/include/asm-mips/mach-generic/param.h +--- linux-2.6.16.7-generic-patched/include/asm-mips/mach-generic/param.h 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7-patched/include/asm-mips/mach-generic/param.h 2006-07-05 15:21:58.000000000 +0200 +@@ -8,6 +8,6 @@ + #ifndef __ASM_MACH_GENERIC_PARAM_H + #define __ASM_MACH_GENERIC_PARAM_H + +-#define HZ 1000 /* Internal kernel timer frequency */ ++#define HZ 200 /* Internal kernel timer frequency */ + + #endif /* __ASM_MACH_GENERIC_PARAM_H */ +diff -Naurp -x mach-bcm963xx linux-2.6.16.7-generic-patched/include/asm-mips/module.h linux-2.6.16.7-patched/include/asm-mips/module.h +--- linux-2.6.16.7-generic-patched/include/asm-mips/module.h 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7-patched/include/asm-mips/module.h 2006-07-05 15:21:58.000000000 +0200 +@@ -113,6 +113,12 @@ search_module_dbetables(unsigned long ad + #define MODULE_PROC_FAMILY "RM9000 " + #elif defined CONFIG_CPU_SB1 + #define MODULE_PROC_FAMILY "SB1 " ++#elif defined CONFIG_CPU_BCM6338 ++#define MODULE_PROC_FAMILY "BCM6338 " ++#elif defined CONFIG_CPU_BCM6345 ++#define MODULE_PROC_FAMILY "BCM6345 " ++#elif defined CONFIG_CPU_BCM6348 ++#define MODULE_PROC_FAMILY "BCM6348 " + #else + #error MODULE_PROC_FAMILY undefined for your processor configuration + #endif diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/011-include_mach_bcm963xx.patch b/openwrt/target/linux/brcm63xx-2.6/patches/011-include_mach_bcm963xx.patch new file mode 100644 index 0000000000..ad0cbbba56 --- /dev/null +++ b/openwrt/target/linux/brcm63xx-2.6/patches/011-include_mach_bcm963xx.patch @@ -0,0 +1,40 @@ +diff -Naurp linux-2.6.16.7-generic-patched/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h linux-2.6.16.7-patched/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h +--- linux-2.6.16.7-generic-patched/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,36 @@ ++#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H ++#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H ++ ++#define cpu_has_tlb 1 ++#define cpu_has_4kex 4 ++#define cpu_has_4ktlb 8 ++#define cpu_has_fpu 0 ++#define cpu_has_32fpr 0 ++#define cpu_has_counter 0x40 ++#define cpu_has_watch 0 ++#define cpu_has_mips16 0 ++#define cpu_has_divec 0x200 ++#define cpu_has_vce 0 ++#define cpu_has_cache_cdex_p 0 ++#define cpu_has_cache_cdex_s 0 ++#define cpu_has_prefetch 0x40000 ++#define cpu_has_mcheck 0x2000 ++#define cpu_has_ejtag 0x4000 ++#define cpu_has_llsc 0x10000 ++#define cpu_has_vtag_icache 0 ++#define cpu_has_dc_aliases 0 ++#define cpu_has_ic_fills_f_dc 0 ++ ++#define cpu_has_nofpuex 0 ++#define cpu_has_64bits 0 ++#define cpu_has_64bit_zero_reg 0 ++#define cpu_has_64bit_gp_regs 0 ++#define cpu_has_64bit_addresses 0 ++ ++#define cpu_has_subset_pcaches 0 ++ ++#define cpu_dcache_line_size() 16 ++#define cpu_icache_line_size() 16 ++#define cpu_scache_line_size() 0 ++ ++#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */ diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/020-bcmdrivers.patch b/openwrt/target/linux/brcm63xx-2.6/patches/020-bcmdrivers.patch new file mode 100644 index 0000000000..a3882ff131 --- /dev/null +++ b/openwrt/target/linux/brcm63xx-2.6/patches/020-bcmdrivers.patch @@ -0,0 +1,3249 @@ +diff -Naurp linux-2.6.16.7-generic-patched/bcmdrivers/opensource/Makefile linux-2.6.16.7-patched/bcmdrivers/opensource/Makefile +--- linux-2.6.16.7-generic-patched/bcmdrivers/opensource/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/bcmdrivers/opensource/Makefile 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,20 @@ ++# File: modules/drivers/Makefile ++# ++# Makefile for the GPLed Linux kernel modules. ++# ++ ++LN_NAME=bcm9$(BRCM_CHIP) ++LN_DRIVER_DIRS = ++ ++-include $(KERNEL_DIR)/.config ++ ++ifneq ($(CONFIG_BCM_SERIAL),) ++ LN_DRIVER_DIRS +=ln -sn impl$(CONFIG_BCM_SERIAL_IMPL) char/serial/$(LN_NAME); ++endif ++ ++obj-$(CONFIG_BCM_SERIAL) += char/serial/impl$(CONFIG_BCM_SERIAL_IMPL)/ ++ ++ ++symlinks: ++ find . -lname "*" -name "$(LN_NAME)" -print -exec rm -f "{}" ";" ++ $(CONFIG_SHELL) -c "$(LN_DRIVER_DIRS)" +diff -Naurp linux-2.6.16.7-generic-patched/bcmdrivers/opensource/char/serial/impl1/Makefile linux-2.6.16.7-patched/bcmdrivers/opensource/char/serial/impl1/Makefile +--- linux-2.6.16.7-generic-patched/bcmdrivers/opensource/char/serial/impl1/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/bcmdrivers/opensource/char/serial/impl1/Makefile 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,13 @@ ++# File: bcmdrivers/opensource/char/serial ++# ++# Makefile for the BCM63xx serial/console driver ++ ++obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o ++ ++EXTRA_CFLAGS += -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD) ++ ++-include $(TOPDIR)/Rules.make ++ ++clean: ++ rm -f core *.o *.a *.s ++ +diff -Naurp linux-2.6.16.7-generic-patched/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c linux-2.6.16.7-patched/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c +--- linux-2.6.16.7-generic-patched/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,1038 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++/* Description: Serial port driver for the BCM963XX. */ ++ ++#define CARDNAME "bcm963xx_serial driver" ++#define VERSION "2.0" ++#define VER_STR CARDNAME " v" VERSION "\n" ++ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* for definition of struct console */ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++extern void _putc(char); ++extern void _puts(const char *); ++ ++typedef struct bcm_serial { ++ volatile Uart * port; ++ int type; ++ int flags; ++ int irq; ++ int baud_base; ++ int blocked_open; ++ unsigned short close_delay; ++ unsigned short closing_wait; ++ unsigned short line; /* port/line number */ ++ unsigned short cflags; /* line configuration flag */ ++ unsigned short x_char; /* xon/xoff character */ ++ unsigned short read_status_mask; /* mask for read condition */ ++ unsigned short ignore_status_mask; /* mask for ignore condition */ ++ unsigned long event; /* mask used in BH */ ++ int xmit_head; /* Position of the head */ ++ int xmit_tail; /* Position of the tail */ ++ int xmit_cnt; /* Count of the chars in the buffer */ ++ int count; /* indicates how many times it has been opened */ ++ int magic; ++ ++ struct async_icount icount; /* keep track of things ... */ ++ struct tty_struct *tty; /* tty associated */ ++ struct termios normal_termios; ++ ++ wait_queue_head_t open_wait; ++ wait_queue_head_t close_wait; ++ ++ long session; /* Session of opening process */ ++ long pgrp; /* pgrp of opening process */ ++ ++ unsigned char is_initialized; ++} Context; ++ ++ ++/*---------------------------------------------------------------------*/ ++/* Define bits in the Interrupt Enable register */ ++/*---------------------------------------------------------------------*/ ++/* Enable receive interrupt */ ++#define RXINT (RXFIFONE|RXOVFERR) ++ ++/* Enable transmit interrupt */ ++#define TXINT (TXFIFOEMT|TXUNDERR|TXOVFERR) ++ ++/* Enable receiver line status interrupt */ ++#define LSINT (RXBRK|RXPARERR|RXFRAMERR) ++ ++#define BCM_NUM_UARTS 1 ++ ++#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH) ++ ++ ++static struct bcm_serial multi[BCM_NUM_UARTS]; ++static struct bcm_serial *lines[BCM_NUM_UARTS]; ++static struct tty_driver serial_driver; ++static struct tty_struct *serial_table[BCM_NUM_UARTS]; ++static struct termios *serial_termios[BCM_NUM_UARTS]; ++static struct termios *serial_termios_locked[BCM_NUM_UARTS]; ++static int serial_refcount; ++ ++ ++static void bcm_stop (struct tty_struct *tty); ++static void bcm_start (struct tty_struct *tty); ++static inline void receive_chars (struct bcm_serial * info); ++static int startup (struct bcm_serial *info); ++static void shutdown (struct bcm_serial * info); ++static void change_speed( volatile Uart *pUart, tcflag_t cFlag ); ++static void bcm63xx_cons_flush_chars (struct tty_struct *tty); ++static int bcm63xx_cons_write (struct tty_struct *tty, int from_user, ++ const unsigned char *buf, int count); ++static int bcm63xx_cons_write_room (struct tty_struct *tty); ++static int bcm_chars_in_buffer (struct tty_struct *tty); ++static void bcm_flush_buffer (struct tty_struct *tty); ++static void bcm_throttle (struct tty_struct *tty); ++static void bcm_unthrottle (struct tty_struct *tty); ++static void bcm_send_xchar (struct tty_struct *tty, char ch); ++static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo); ++static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info); ++static int get_lsr_info (struct bcm_serial *info, unsigned int *value); ++static void send_break (struct bcm_serial *info, int duration); ++static int bcm_ioctl (struct tty_struct * tty, struct file * file, ++ unsigned int cmd, unsigned long arg); ++static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios); ++static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp); ++static void bcm_hangup (struct tty_struct *tty); ++static int block_til_ready (struct tty_struct *tty, struct file *filp, struct bcm_serial *info); ++static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp); ++static int __init bcm63xx_serialinit(void); ++ ++ ++/* ++ * ------------------------------------------------------------ ++ * rs_stop () and rs_start () ++ * ++ * These routines are called before setting or resetting ++ * tty->stopped. They enable or disable transmitter interrupts, ++ * as necessary. ++ * ------------------------------------------------------------ ++ */ ++static void bcm_stop (struct tty_struct *tty) ++{ ++} ++ ++static void bcm_start (struct tty_struct *tty) ++{ ++ _puts(CARDNAME " Start\n"); ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * receive_char () ++ * ++ * This routine deals with inputs from any lines. ++ * ------------------------------------------------------------ ++ */ ++static inline void receive_chars (struct bcm_serial * info) ++{ ++ struct tty_struct *tty = 0; ++ struct async_icount * icount; ++ int ignore = 0; ++ unsigned short status, tmp; ++ UCHAR ch = 0; ++ while ((status = info->port->intStatus) & RXINT) ++ { ++ char flag_char = 0; ++ ++ if (status & RXFIFONE) ++ ch = info->port->Data; // Read the character ++ tty = info->tty; /* now tty points to the proper dev */ ++ icount = &info->icount; ++ if (! tty) ++ break; ++ if (!tty_buffer_request_room(tty, 1)) ++ break; ++ icount->rx++; ++ if (status & RXBRK) ++ { ++ flag_char = TTY_BREAK; ++ icount->brk++; ++ } ++ // keep track of the statistics ++ if (status & (RXFRAMERR | RXPARERR | RXOVFERR)) ++ { ++ if (status & RXPARERR) /* parity error */ ++ icount->parity++; ++ else ++ if (status & RXFRAMERR) /* frame error */ ++ icount->frame++; ++ if (status & RXOVFERR) ++ { ++ // Overflow. Reset the RX FIFO ++ info->port->fifoctl |= RSTRXFIFOS; ++ icount->overrun++; ++ } ++ // check to see if we should ignore the character ++ // and mask off conditions that should be ignored ++ if (status & info->ignore_status_mask) ++ { ++ if (++ignore > 100 ) ++ break; ++ goto ignore_char; ++ } ++ // Mask off the error conditions we want to ignore ++ tmp = status & info->read_status_mask; ++ if (tmp & RXPARERR) ++ { ++ flag_char = TTY_PARITY; ++ } ++ else ++ if (tmp & RXFRAMERR) ++ { ++ flag_char = TTY_FRAME; ++ } ++ if (tmp & RXOVFERR) ++ { ++ tty_insert_flip_char(tty, ch, flag_char); ++ ch = 0; ++ flag_char = TTY_OVERRUN; ++ if (!tty_buffer_request_room(tty, 1)) ++ break; ++ } ++ } ++ tty_insert_flip_char(tty, ch, flag_char); ++ } ++ignore_char: ++ if (tty) ++ tty_flip_buffer_push(tty); ++} ++ ++ ++/* ++ * ------------------------------------------------------------ ++ * bcm_interrupt () ++ * ++ * this is the main interrupt routine for the chip. ++ * It deals with the multiple ports. ++ * ------------------------------------------------------------ ++ */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++static irqreturn_t bcm_interrupt (int irq, void * dev, struct pt_regs * regs) ++#else ++static void bcm_interrupt (int irq, void * dev, struct pt_regs * regs) ++#endif ++{ ++ struct bcm_serial * info = lines[0]; ++ UINT16 intStat; ++ ++ /* get pending interrupt flags from UART */ ++ ++ /* Mask with only the serial interrupts that are enabled */ ++ intStat = info->port->intStatus & info->port->intMask; ++ while (intStat) ++ { ++ if (intStat & RXINT) ++ receive_chars (info); ++ else ++ if (intStat & TXINT) ++ info->port->intStatus = TXINT; ++ else /* don't know what it was, so let's mask it */ ++ info->port->intMask &= ~intStat; ++ ++ intStat = info->port->intStatus & info->port->intMask; ++ } ++ ++ // Clear the interrupt ++ BcmHalInterruptEnable (INTERRUPT_ID_UART); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ return IRQ_HANDLED; ++#endif ++} ++ ++/* ++ * ------------------------------------------------------------------- ++ * startup () ++ * ++ * various initialization tasks ++ * ------------------------------------------------------------------- ++ */ ++static int startup (struct bcm_serial *info) ++{ ++ // Port is already started... ++ return 0; ++} ++ ++/* ++ * ------------------------------------------------------------------- ++ * shutdown () ++ * ++ * This routine will shutdown a serial port; interrupts are disabled, and ++ * DTR is dropped if the hangup on close termio flag is on. ++ * ------------------------------------------------------------------- ++ */ ++static void shutdown (struct bcm_serial * info) ++{ ++ unsigned long flags; ++ if (!info->is_initialized) ++ return; ++ ++ save_flags (flags); ++ cli (); ++ ++ info->port->control &= ~(BRGEN|TXEN|RXEN); ++ if (info->tty) ++ set_bit (TTY_IO_ERROR, &info->tty->flags); ++ info->is_initialized = 0; ++ ++ restore_flags (flags); ++} ++/* ++ * ------------------------------------------------------------------- ++ * change_speed () ++ * ++ * Set the baud rate, character size, parity and stop bits. ++ * ------------------------------------------------------------------- ++ */ ++static void change_speed( volatile Uart *pUart, tcflag_t cFlag ) ++{ ++ unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp; ++ save_flags(ulFlags); ++ cli(); ++ switch( cFlag & (CBAUD | CBAUDEX) ) ++ { ++ case B115200: ++ ulBaud = 115200; ++ break; ++ case B57600: ++ ulBaud = 57600; ++ break; ++ case B38400: ++ ulBaud = 38400; ++ break; ++ case B19200: ++ ulBaud = 19200; ++ break; ++ case B9600: ++ ulBaud = 9600; ++ break; ++ case B4800: ++ ulBaud = 4800; ++ break; ++ case B2400: ++ ulBaud = 2400; ++ break; ++ case B1800: ++ ulBaud = 1800; ++ break; ++ case B1200: ++ ulBaud = 1200; ++ break; ++ case B600: ++ ulBaud = 600; ++ break; ++ case B300: ++ ulBaud = 300; ++ break; ++ case B200: ++ ulBaud = 200; ++ break; ++ case B150: ++ ulBaud = 150; ++ break; ++ case B134: ++ ulBaud = 134; ++ break; ++ case B110: ++ ulBaud = 110; ++ break; ++ case B75: ++ ulBaud = 75; ++ break; ++ case B50: ++ ulBaud = 50; ++ break; ++ default: ++ ulBaud = 115200; ++ break; ++ } ++ ++ /* Calculate buad rate. */ ++ ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT; ++ ulTmp = (ulClockFreqHz / ulBaud) / 16; ++ if( ulTmp & 0x01 ) ++ ulTmp /= 2; /* Rounding up, so sub is already accounted for */ ++ else ++ ulTmp = (ulTmp / 2) - 1; /* Rounding down so we must sub 1 */ ++ pUart->baudword = ulTmp; ++ ++ /* Set character size, stop bits and parity. */ ++ switch( cFlag & CSIZE ) ++ { ++ case CS5: ++ ulTmp = BITS5SYM; /* select transmit 5 bit data size */ ++ break; ++ case CS6: ++ ulTmp = BITS6SYM; /* select transmit 6 bit data size */ ++ break; ++ case CS7: ++ ulTmp = BITS7SYM; /* select transmit 7 bit data size */ ++ break; ++ /*case CS8:*/ ++ default: ++ ulTmp = BITS8SYM; /* select transmit 8 bit data size */ ++ break; ++ } ++ if( cFlag & CSTOPB ) ++ ulTmp |= TWOSTOP; /* select 2 stop bits */ ++ else ++ ulTmp |= ONESTOP; /* select one stop bit */ ++ ++ /* Write these values into the config reg. */ ++ pUart->config = ulTmp; ++ pUart->control &= ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN); ++ switch( cFlag & (PARENB | PARODD) ) ++ { ++ case PARENB|PARODD: ++ pUart->control |= RXPARITYEN | TXPARITYEN; ++ break; ++ case PARENB: ++ pUart->control |= RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN; ++ break; ++ default: ++ pUart->control |= 0; ++ break; ++ } ++ ++ /* Reset and flush uart */ ++ pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS; ++ restore_flags( ulFlags ); ++} ++ ++ ++/* ++ * ------------------------------------------------------------------- ++ * bcm_flush_char () ++ * ++ * Nothing to flush. Polled I/O is used. ++ * ------------------------------------------------------------------- ++ */ ++static void bcm63xx_cons_flush_chars (struct tty_struct *tty) ++{ ++} ++ ++ ++/* ++ * ------------------------------------------------------------------- ++ * bcm63xx_cons_write () ++ * ++ * Main output routine using polled I/O. ++ * ------------------------------------------------------------------- ++ */ ++static int bcm63xx_cons_write (struct tty_struct *tty, int from_user, ++ const unsigned char *buf, int count) ++{ ++ int c; ++ ++ for (c = 0; c < count; c++) ++ _putc(buf[c]); ++ return count; ++} ++ ++/* ++ * ------------------------------------------------------------------- ++ * bcm63xx_cons_write_room () ++ * ++ * Compute the amount of space available for writing. ++ * ------------------------------------------------------------------- ++ */ ++static int bcm63xx_cons_write_room (struct tty_struct *tty) ++{ ++ /* Pick a number. Any number. Polled I/O is used. */ ++ return 1024; ++} ++ ++/* ++ * ------------------------------------------------------------------- ++ * bcm_chars_in_buffer () ++ * ++ * compute the amount of char left to be transmitted ++ * ------------------------------------------------------------------- ++ */ ++static int bcm_chars_in_buffer (struct tty_struct *tty) ++{ ++ return 0; ++} ++ ++/* ++ * ------------------------------------------------------------------- ++ * bcm_flush_buffer () ++ * ++ * Empty the output buffer ++ * ------------------------------------------------------------------- ++ */ ++static void bcm_flush_buffer (struct tty_struct *tty) ++{ ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * bcm_throttle () and bcm_unthrottle () ++ * ++ * This routine is called by the upper-layer tty layer to signal that ++ * incoming characters should be throttled (or not). ++ * ------------------------------------------------------------ ++ */ ++static void bcm_throttle (struct tty_struct *tty) ++{ ++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; ++ if (I_IXOFF(tty)) ++ info->x_char = STOP_CHAR(tty); ++} ++ ++static void bcm_unthrottle (struct tty_struct *tty) ++{ ++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; ++ if (I_IXOFF(tty)) ++ { ++ if (info->x_char) ++ info->x_char = 0; ++ else ++ info->x_char = START_CHAR(tty); ++ } ++} ++ ++static void bcm_send_xchar (struct tty_struct *tty, char ch) ++{ ++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; ++ info->x_char = ch; ++ if (ch) ++ bcm_start (info->tty); ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * rs_ioctl () and friends ++ * ------------------------------------------------------------ ++ */ ++static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo) ++{ ++ struct serial_struct tmp; ++ ++ if (!retinfo) ++ return -EFAULT; ++ ++ memset (&tmp, 0, sizeof(tmp)); ++ tmp.type = info->type; ++ tmp.line = info->line; ++ tmp.port = (int) info->port; ++ tmp.irq = info->irq; ++ tmp.flags = 0; ++ tmp.baud_base = info->baud_base; ++ tmp.close_delay = info->close_delay; ++ tmp.closing_wait = info->closing_wait; ++ ++ return copy_to_user (retinfo, &tmp, sizeof(*retinfo)); ++} ++ ++static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info) ++{ ++ struct serial_struct new_serial; ++ struct bcm_serial old_info; ++ int retval = 0; ++ ++ if (!new_info) ++ return -EFAULT; ++ ++ copy_from_user (&new_serial, new_info, sizeof(new_serial)); ++ old_info = *info; ++ ++ if (!capable(CAP_SYS_ADMIN)) ++ return -EPERM; ++ ++ ++ if (info->count > 1) ++ return -EBUSY; ++ ++ /* OK, past this point, all the error checking has been done. ++ * At this point, we start making changes..... ++ */ ++ info->baud_base = new_serial.baud_base; ++ info->type = new_serial.type; ++ info->close_delay = new_serial.close_delay; ++ info->closing_wait = new_serial.closing_wait; ++ retval = startup (info); ++ return retval; ++} ++ ++/* ++ * get_lsr_info - get line status register info ++ * ++ * Purpose: Let user call ioctl() to get info when the UART physically ++ * is emptied. On bus types like RS485, the transmitter must ++ * release the bus after transmitting. This must be done when ++ * the transmit shift register is empty, not be done when the ++ * transmit holding register is empty. This functionality ++ * allows an RS485 driver to be written in user space. ++ */ ++static int get_lsr_info (struct bcm_serial *info, unsigned int *value) ++{ ++ return( 0 ); ++} ++ ++/* ++ * This routine sends a break character out the serial port. ++ */ ++static void send_break (struct bcm_serial *info, int duration) ++{ ++ unsigned long flags; ++ ++ if (!info->port) ++ return; ++ ++ current->state = TASK_INTERRUPTIBLE; ++ ++ save_flags (flags); ++ cli(); ++ ++ info->port->control |= XMITBREAK; ++ schedule_timeout(duration); ++ info->port->control &= ~XMITBREAK; ++ ++ restore_flags (flags); ++} ++ ++static int bcm_ioctl (struct tty_struct * tty, struct file * file, ++ unsigned int cmd, unsigned long arg) ++{ ++ int error; ++ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data; ++ int retval; ++ ++ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && ++ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && ++ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) ++ { ++ if (tty->flags & (1 << TTY_IO_ERROR)) ++ return -EIO; ++ } ++ switch (cmd) ++ { ++ ++ case TCSBRK: /* SVID version: non-zero arg --> no break */ ++ retval = tty_check_change (tty); ++ if (retval) ++ return retval; ++ tty_wait_until_sent (tty, 0); ++ if (!arg) ++ send_break (info, HZ/4); /* 1/4 second */ ++ return 0; ++ ++ case TCSBRKP: /* support for POSIX tcsendbreak() */ ++ retval = tty_check_change (tty); ++ if (retval) ++ return retval; ++ tty_wait_until_sent (tty, 0); ++ send_break (info, arg ? arg*(HZ/10) : HZ/4); ++ return 0; ++ ++ case TIOCGSOFTCAR: ++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(long)); ++ if (!error) ++ return -EFAULT; ++ else ++ { ++ put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg); ++ return 0; ++ } ++ ++ case TIOCSSOFTCAR: ++ error = get_user (arg, (unsigned long *)arg); ++ if (error) ++ return error; ++ tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); ++ return 0; ++ ++ case TIOCGSERIAL: ++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct)); ++ if (!error) ++ return -EFAULT; ++ else ++ return get_serial_info (info, (struct serial_struct *)arg); ++ ++ case TIOCSSERIAL: ++ return set_serial_info (info, (struct serial_struct *) arg); ++ ++ case TIOCSERGETLSR: /* Get line status register */ ++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(unsigned int)); ++ if (!error) ++ return -EFAULT; ++ else ++ return get_lsr_info (info, (unsigned int *)arg); ++ ++ case TIOCSERGSTRUCT: ++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct bcm_serial)); ++ if (!error) ++ return -EFAULT; ++ else ++ { ++ copy_to_user((struct bcm_serial *)arg, info, sizeof(struct bcm_serial)); ++ return 0; ++ } ++ ++ default: ++ return -ENOIOCTLCMD; ++ } ++ return 0; ++} ++ ++static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios) ++{ ++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; ++ ++ if( tty->termios->c_cflag != old_termios->c_cflag ) ++ change_speed (info->port, tty->termios->c_cflag); ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * bcm63xx_cons_close() ++ * ++ * This routine is called when the serial port gets closed. First, we ++ * wait for the last remaining data to be sent. Then, we turn off ++ * the transmit enable and receive enable flags. ++ * ------------------------------------------------------------ ++ */ ++static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp) ++{ ++ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data; ++ unsigned long flags; ++ ++ if (!info) ++ return; ++ ++ save_flags (flags); ++ cli(); ++ ++ if (tty_hung_up_p (filp)) ++ { ++ restore_flags (flags); ++ return; ++ } ++ ++ if ((tty->count == 1) && (info->count != 1)) ++ { ++ ++ /* Uh, oh. tty->count is 1, which means that the tty ++ * structure will be freed. Info->count should always ++ * be one in these conditions. If it's greater than ++ * one, we've got real problems, since it means the ++ * serial port won't be shutdown. ++ */ ++ printk("bcm63xx_cons_close: bad serial port count; tty->count is 1, " ++ "info->count is %d\n", info->count); ++ info->count = 1; ++ } ++ ++ if (--info->count < 0) ++ { ++ printk("ds_close: bad serial port count for ttys%d: %d\n", ++ info->line, info->count); ++ info->count = 0; ++ } ++ ++ if (info->count) ++ { ++ restore_flags (flags); ++ return; ++ } ++ ++ /* Now we wait for the transmit buffer to clear; and we notify ++ * the line discipline to only process XON/XOFF characters. ++ */ ++ tty->closing = 1; ++ ++ /* At this point we stop accepting input. To do this, we ++ * disable the receive line status interrupts. ++ */ ++ shutdown (info); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ if (tty->driver->flush_buffer) ++ tty->driver->flush_buffer (tty); ++#else ++ if (tty->driver.flush_buffer) ++ tty->driver.flush_buffer (tty); ++#endif ++ if (tty->ldisc.flush_buffer) ++ tty->ldisc.flush_buffer (tty); ++ ++ tty->closing = 0; ++ info->event = 0; ++ info->tty = 0; ++ if (tty->ldisc.num != tty_ldisc_get(N_TTY)->num) ++ { ++ if (tty->ldisc.close) ++ (tty->ldisc.close)(tty); ++ tty->ldisc = *tty_ldisc_get(N_TTY); ++ tty->termios->c_line = N_TTY; ++ if (tty->ldisc.open) ++ (tty->ldisc.open)(tty); ++ } ++ if (info->blocked_open) ++ { ++ if (info->close_delay) ++ { ++ current->state = TASK_INTERRUPTIBLE; ++ schedule_timeout(info->close_delay); ++ } ++ wake_up_interruptible (&info->open_wait); ++ } ++ wake_up_interruptible (&info->close_wait); ++ ++ restore_flags (flags); ++} ++ ++/* ++ * bcm_hangup () --- called by tty_hangup() when a hangup is signaled. ++ */ ++static void bcm_hangup (struct tty_struct *tty) ++{ ++ ++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; ++ ++ shutdown (info); ++ info->event = 0; ++ info->count = 0; ++ info->tty = 0; ++ wake_up_interruptible (&info->open_wait); ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * rs_open() and friends ++ * ------------------------------------------------------------ ++ */ ++static int block_til_ready (struct tty_struct *tty, struct file *filp, ++ struct bcm_serial *info) ++{ ++ return 0; ++} ++ ++/* ++ * This routine is called whenever a serial port is opened. It ++ * enables interrupts for a serial port. It also performs the ++ * serial-specific initialization for the tty structure. ++ */ ++static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp) ++{ ++ struct bcm_serial *info; ++ int retval, line; ++ ++ // Make sure we're only opening on of the ports we support ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start; ++#else ++ line = MINOR(tty->device) - tty->driver.minor_start; ++#endif ++ ++ if ((line < 0) || (line >= BCM_NUM_UARTS)) ++ return -ENODEV; ++ ++ info = lines[line]; ++ ++ info->port->intMask = 0; /* Clear any pending interrupts */ ++ info->port->intMask = RXINT; /* Enable RX */ ++ ++ info->count++; ++ tty->driver_data = info; ++ info->tty = tty; ++ BcmHalInterruptEnable (INTERRUPT_ID_UART); ++ ++ // Start up serial port ++ retval = startup (info); ++ if (retval) ++ return retval; ++ ++ retval = block_til_ready (tty, filp, info); ++ if (retval) ++ return retval; ++ ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ info->pgrp = process_group(current); ++ info->session = current->signal->session; ++#else ++ info->session = current->session; ++ info->pgrp = current->pgrp; ++#endif ++ ++ return 0; ++} ++ ++/* -------------------------------------------------------------------------- ++ Name: bcm63xx_serialinit ++ Purpose: Initialize our BCM63xx serial driver ++-------------------------------------------------------------------------- */ ++static int __init bcm63xx_serialinit(void) ++{ ++ int i, flags; ++ struct bcm_serial * info; ++ ++ // Print the driver version information ++ printk(VER_STR); ++ ++ memset(&serial_driver, 0, sizeof(struct tty_driver)); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ serial_driver.owner = THIS_MODULE; ++ serial_driver.devfs_name = "tts/"; ++#endif ++ serial_driver.magic = TTY_DRIVER_MAGIC; ++ serial_driver.name = "ttyS"; ++ serial_driver.major = TTY_MAJOR; ++ serial_driver.minor_start = 64; ++ serial_driver.num = BCM_NUM_UARTS; ++ serial_driver.type = TTY_DRIVER_TYPE_SERIAL; ++ serial_driver.subtype = SERIAL_TYPE_NORMAL; ++ serial_driver.init_termios = tty_std_termios; ++ serial_driver.init_termios.c_cflag = B115200 | CS8 | CREAD | CLOCAL; ++ serial_driver.flags = TTY_DRIVER_REAL_RAW; ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ serial_driver.refcount = serial_refcount; ++ serial_driver.ttys = serial_table; ++#else ++ serial_driver.refcount = &serial_refcount; ++ serial_driver.table = serial_table; ++#endif ++ ++ serial_driver.termios = serial_termios; ++ serial_driver.termios_locked = serial_termios_locked; ++ serial_driver.open = bcm63xx_cons_open; ++ serial_driver.close = bcm63xx_cons_close; ++ serial_driver.write = bcm63xx_cons_write; ++ serial_driver.flush_chars = bcm63xx_cons_flush_chars; ++ serial_driver.write_room = bcm63xx_cons_write_room; ++ serial_driver.chars_in_buffer = bcm_chars_in_buffer; ++ serial_driver.flush_buffer = bcm_flush_buffer; ++ serial_driver.ioctl = bcm_ioctl; ++ serial_driver.throttle = bcm_throttle; ++ serial_driver.unthrottle = bcm_unthrottle; ++ serial_driver.send_xchar = bcm_send_xchar; ++ serial_driver.set_termios = bcm_set_termios; ++ serial_driver.stop = bcm_stop; ++ serial_driver.start = bcm_start; ++ serial_driver.hangup = bcm_hangup; ++ ++ if (tty_register_driver (&serial_driver)) ++ panic("Couldn't register serial driver\n"); ++ ++ save_flags(flags); cli(); ++ for (i = 0; i < BCM_NUM_UARTS; i++) ++ { ++ info = &multi[i]; ++ lines[i] = info; ++ info->port = (Uart *) ((char *)UART_BASE + (i * 0x20)); ++ info->irq = (2 - i) + 8; ++ info->line = i; ++ info->tty = 0; ++ info->close_delay = 50; ++ info->closing_wait = 3000; ++ info->x_char = 0; ++ info->event = 0; ++ info->count = 0; ++ info->blocked_open = 0; ++ info->normal_termios = serial_driver.init_termios; ++ init_waitqueue_head(&info->open_wait); ++ init_waitqueue_head(&info->close_wait); ++ ++ /* If we are pointing to address zero then punt - not correctly ++ * set up in setup.c to handle this. ++ */ ++ if (! info->port) ++ return 0; ++ BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART); ++ } ++ ++ /* order matters here... the trick is that flags ++ * is updated... in request_irq - to immediatedly obliterate ++ * it is unwise. ++ */ ++ restore_flags(flags); ++ return 0; ++} ++ ++module_init(bcm63xx_serialinit); ++ ++/* -------------------------------------------------------------------------- ++ Name: bcm_console_print ++ Purpose: bcm_console_print is registered for printk. ++ The console_lock must be held when we get here. ++-------------------------------------------------------------------------- */ ++static void bcm_console_print (struct console * cons, const char * str, ++ unsigned int count) ++{ ++ unsigned int i; ++ //_puts(str); ++ for(i=0; iindex; ++ return &serial_driver; ++} ++ ++static int __init bcm_console_setup(struct console * co, char * options) ++{ ++ return 0; ++} ++ ++static struct console bcm_sercons = { ++ .name = "ttyS", ++ .write = bcm_console_print, ++ .device = bcm_console_device, ++ .setup = bcm_console_setup, ++ .flags = CON_PRINTBUFFER, // CON_CONSDEV, CONSOLE_LINE, ++ .index = -1, ++}; ++ ++static int __init bcm63xx_console_init(void) ++{ ++ register_console(&bcm_sercons); ++ return 0; ++} ++ ++console_initcall(bcm63xx_console_init); +diff -Naurp linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/6338_intr.h linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/6338_intr.h +--- linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/6338_intr.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/6338_intr.h 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,72 @@ ++/* ++<:copyright-gpl ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __6338_INTR_H ++#define __6338_INTR_H ++ ++#ifdef __cplusplus ++ extern "C" { ++#endif ++ ++/*=====================================================================*/ ++/* BCM6338 External Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define INTERRUPT_ID_EXTERNAL_0 3 ++#define INTERRUPT_ID_EXTERNAL_1 4 ++#define INTERRUPT_ID_EXTERNAL_2 5 ++#define INTERRUPT_ID_EXTERNAL_3 6 ++ ++/*=====================================================================*/ ++/* BCM6338 Timer Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define MIPS_TIMER_INT 7 ++ ++/*=====================================================================*/ ++/* Peripheral ISR Table Offset */ ++/*=====================================================================*/ ++#define INTERNAL_ISR_TABLE_OFFSET 8 ++ ++/*=====================================================================*/ ++/* Logical Peripheral Interrupt IDs */ ++/*=====================================================================*/ ++ ++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) ++#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) ++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) ++#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4) ++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5) ++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6) ++#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7) ++#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) ++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) ++#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10) ++#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11) ++#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12) ++#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13) ++#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) ++#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) ++#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) ++#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17) ++ ++#ifdef __cplusplus ++ } ++#endif ++ ++#endif /* __BCM6338_H */ ++ +diff -Naurp linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h +--- linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,341 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __BCM6338_MAP_H ++#define __BCM6338_MAP_H ++ ++#if __cplusplus ++extern "C" { ++#endif ++ ++#include "bcmtypes.h" ++ ++#define PERF_BASE 0xfffe0000 ++#define TIMR_BASE 0xfffe0200 ++#define UART_BASE 0xfffe0300 ++#define GPIO_BASE 0xfffe0400 ++#define SPI_BASE 0xfffe0c00 ++ ++typedef struct PerfControl { ++ uint32 RevID; ++ uint16 testControl; ++ uint16 blkEnables; ++#define EMAC_CLK_EN 0x0010 ++#define USBS_CLK_EN 0x0010 ++#define SAR_CLK_EN 0x0020 ++ ++#define SPI_CLK_EN 0x0200 ++ ++ uint32 pll_control; ++#define SOFT_RESET 0x00000001 ++ ++ uint32 IrqMask; ++ uint32 IrqStatus; ++ ++ uint32 ExtIrqCfg; ++#define EI_SENSE_SHFT 0 ++#define EI_STATUS_SHFT 5 ++#define EI_CLEAR_SHFT 10 ++#define EI_MASK_SHFT 15 ++#define EI_INSENS_SHFT 20 ++#define EI_LEVEL_SHFT 25 ++ ++ uint32 unused[4]; /* (18) */ ++ uint32 BlockSoftReset; /* (28) */ ++#define BSR_SPI 0x00000001 ++#define BSR_EMAC 0x00000004 ++#define BSR_USBH 0x00000008 ++#define BSR_USBS 0x00000010 ++#define BSR_ADSL 0x00000020 ++#define BSR_DMAMEM 0x00000040 ++#define BSR_SAR 0x00000080 ++#define BSR_ACLC 0x00000100 ++#define BSR_ADSL_MIPS_PLL 0x00000400 ++#define BSR_ALL_BLOCKS \ ++ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ ++ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) ++} PerfControl; ++ ++#define PERF ((volatile PerfControl * const) PERF_BASE) ++ ++ ++typedef struct Timer { ++ uint16 unused0; ++ byte TimerMask; ++#define TIMER0EN 0x01 ++#define TIMER1EN 0x02 ++#define TIMER2EN 0x04 ++ byte TimerInts; ++#define TIMER0 0x01 ++#define TIMER1 0x02 ++#define TIMER2 0x04 ++#define WATCHDOG 0x08 ++ uint32 TimerCtl0; ++ uint32 TimerCtl1; ++ uint32 TimerCtl2; ++#define TIMERENABLE 0x80000000 ++#define RSTCNTCLR 0x40000000 ++ uint32 TimerCnt0; ++ uint32 TimerCnt1; ++ uint32 TimerCnt2; ++ uint32 WatchDogDefCount; ++ ++ /* Write 0xff00 0x00ff to Start timer ++ * Write 0xee00 0x00ee to Stop and re-load default count ++ * Read from this register returns current watch dog count ++ */ ++ uint32 WatchDogCtl; ++ ++ /* Number of 40-MHz ticks for WD Reset pulse to last */ ++ uint32 WDResetCount; ++} Timer; ++ ++#define TIMER ((volatile Timer * const) TIMR_BASE) ++typedef struct UartChannel { ++ byte unused0; ++ byte control; ++#define BRGEN 0x80 /* Control register bit defs */ ++#define TXEN 0x40 ++#define RXEN 0x20 ++#define LOOPBK 0x10 ++#define TXPARITYEN 0x08 ++#define TXPARITYEVEN 0x04 ++#define RXPARITYEN 0x02 ++#define RXPARITYEVEN 0x01 ++ ++ byte config; ++#define XMITBREAK 0x40 ++#define BITS5SYM 0x00 ++#define BITS6SYM 0x10 ++#define BITS7SYM 0x20 ++#define BITS8SYM 0x30 ++#define ONESTOP 0x07 ++#define TWOSTOP 0x0f ++ /* 4-LSBS represent STOP bits/char ++ * in 1/8 bit-time intervals. Zero ++ * represents 1/8 stop bit interval. ++ * Fifteen represents 2 stop bits. ++ */ ++ byte fifoctl; ++#define RSTTXFIFOS 0x80 ++#define RSTRXFIFOS 0x40 ++ /* 5-bit TimeoutCnt is in low bits of this register. ++ * This count represents the number of characters ++ * idle times before setting receive Irq when below threshold ++ */ ++ uint32 baudword; ++ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate ++ */ ++ ++ byte txf_levl; /* Read-only fifo depth */ ++ byte rxf_levl; /* Read-only fifo depth */ ++ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are ++ * RxThreshold. Irq can be asserted ++ * when rx fifo> thresh, txfifo ++*/ ++ ++#ifndef __6345_INTR_H ++#define __6345_INTR_H ++ ++#ifdef __cplusplus ++ extern "C" { ++#endif ++ ++/*=====================================================================*/ ++/* BCM6345 External Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define INTERRUPT_ID_EXTERNAL_0 3 ++#define INTERRUPT_ID_EXTERNAL_1 4 ++#define INTERRUPT_ID_EXTERNAL_2 5 ++#define INTERRUPT_ID_EXTERNAL_3 6 ++ ++/*=====================================================================*/ ++/* BCM6345 Timer Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define MIPS_TIMER_INT 7 ++ ++/*=====================================================================*/ ++/* Peripheral ISR Table Offset */ ++/*=====================================================================*/ ++#define INTERNAL_ISR_TABLE_OFFSET 8 ++#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13) ++ ++/*=====================================================================*/ ++/* Logical Peripheral Interrupt IDs */ ++/*=====================================================================*/ ++ ++/* Internal peripheral interrupt IDs */ ++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) ++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) ++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3) ++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4) ++#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5) ++#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8) ++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12) ++ ++/* DMA channel interrupt IDs */ ++#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN) ++#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN) ++#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN) ++#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN) ++#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN) ++#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN) ++#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN) ++#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN) ++#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN) ++#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN) ++#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN) ++#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN) ++ ++#ifdef __cplusplus ++ } ++#endif ++ ++#endif /* __BCM6345_H */ ++ +diff -Naurp linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h +--- linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,169 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __BCM6345_MAP_H ++#define __BCM6345_MAP_H ++ ++#if __cplusplus ++extern "C" { ++#endif ++ ++#include "bcmtypes.h" ++#include "6345_intr.h" ++ ++typedef struct IntControl { ++ uint32 RevID; ++ uint16 testControl; ++ uint16 blkEnables; ++#define USB_CLK_EN 0x0100 ++#define EMAC_CLK_EN 0x0080 ++#define UART_CLK_EN 0x0008 ++#define CPU_CLK_EN 0x0001 ++ ++ uint32 pll_control; ++#define SOFT_RESET 0x00000001 ++ ++ uint32 IrqMask; ++ uint32 IrqStatus; ++ ++ uint32 ExtIrqCfg; ++#define EI_SENSE_SHFT 0 ++#define EI_STATUS_SHFT 4 ++#define EI_CLEAR_SHFT 8 ++#define EI_MASK_SHFT 12 ++#define EI_INSENS_SHFT 16 ++#define EI_LEVEL_SHFT 20 ++} IntControl; ++ ++#define INTC_BASE 0xfffe0000 ++#define PERF ((volatile IntControl * const) INTC_BASE) ++ ++#define TIMR_BASE 0xfffe0200 ++typedef struct Timer { ++ uint16 unused0; ++ byte TimerMask; ++#define TIMER0EN 0x01 ++#define TIMER1EN 0x02 ++#define TIMER2EN 0x04 ++ byte TimerInts; ++#define TIMER0 0x01 ++#define TIMER1 0x02 ++#define TIMER2 0x04 ++#define WATCHDOG 0x08 ++ uint32 TimerCtl0; ++ uint32 TimerCtl1; ++ uint32 TimerCtl2; ++#define TIMERENABLE 0x80000000 ++#define RSTCNTCLR 0x40000000 ++ uint32 TimerCnt0; ++ uint32 TimerCnt1; ++ uint32 TimerCnt2; ++ uint32 WatchDogDefCount; ++ ++ /* Write 0xff00 0x00ff to Start timer ++ * Write 0xee00 0x00ee to Stop and re-load default count ++ * Read from this register returns current watch dog count ++ */ ++ uint32 WatchDogCtl; ++ ++ /* Number of 40-MHz ticks for WD Reset pulse to last */ ++ uint32 WDResetCount; ++} Timer; ++ ++#define TIMER ((volatile Timer * const) TIMR_BASE) ++ ++typedef struct UartChannel { ++ byte unused0; ++ byte control; ++#define BRGEN 0x80 /* Control register bit defs */ ++#define TXEN 0x40 ++#define RXEN 0x20 ++#define TXPARITYEN 0x08 ++#define TXPARITYEVEN 0x04 ++#define RXPARITYEN 0x02 ++#define RXPARITYEVEN 0x01 ++ byte config; ++#define BITS5SYM 0x00 ++#define BITS6SYM 0x10 ++#define BITS7SYM 0x20 ++#define BITS8SYM 0x30 ++#define XMITBREAK 0x40 ++#define ONESTOP 0x07 ++#define TWOSTOP 0x0f ++ ++ byte fifoctl; ++#define RSTTXFIFOS 0x80 ++#define RSTRXFIFOS 0x40 ++ uint32 baudword; ++ ++ byte txf_levl; ++ byte rxf_levl; ++ byte fifocfg; ++ byte prog_out; ++ ++ byte unused1; ++ byte DeltaIPEdgeNoSense; ++ byte DeltaIPConfig_Mask; ++ byte DeltaIP_SyncIP; ++ uint16 intMask; ++ uint16 intStatus; ++#define TXUNDERR 0x0002 ++#define TXOVFERR 0x0004 ++#define TXFIFOEMT 0x0020 ++#define RXOVFERR 0x0080 ++#define RXFIFONE 0x0800 ++#define RXFRAMERR 0x1000 ++#define RXPARERR 0x2000 ++#define RXBRK 0x4000 ++ ++ uint16 unused2; ++ uint16 Data; ++ uint32 unused3; ++ uint32 unused4; ++} Uart; ++ ++#define UART_BASE 0xfffe0300 ++#define UART ((volatile Uart * const) UART_BASE) ++ ++typedef struct GpioControl { ++ uint16 unused0; ++ byte unused1; ++ byte TBusSel; ++ ++ uint16 unused2; ++ uint16 GPIODir; ++ byte unused3; ++ byte Leds; ++ uint16 GPIOio; ++ ++ uint32 UartCtl; ++} GpioControl; ++ ++#define GPIO_BASE 0xfffe0400 ++#define GPIO ((volatile GpioControl * const) GPIO_BASE) ++ ++#define GPIO_NUM_MAX_BITS_MASK 0x0f ++#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) ++ ++#if __cplusplus ++} ++#endif ++ ++#endif ++ +diff -Naurp linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/6348_intr.h linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/6348_intr.h +--- linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/6348_intr.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/6348_intr.h 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,80 @@ ++/* ++<:copyright-gpl ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __6348_INTR_H ++#define __6348_INTR_H ++ ++#ifdef __cplusplus ++ extern "C" { ++#endif ++ ++/*=====================================================================*/ ++/* BCM6348 External Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define INTERRUPT_ID_EXTERNAL_0 3 ++#define INTERRUPT_ID_EXTERNAL_1 4 ++#define INTERRUPT_ID_EXTERNAL_2 5 ++#define INTERRUPT_ID_EXTERNAL_3 6 ++ ++/*=====================================================================*/ ++/* BCM6348 Timer Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define MIPS_TIMER_INT 7 ++ ++/*=====================================================================*/ ++/* Peripheral ISR Table Offset */ ++/*=====================================================================*/ ++#define INTERNAL_ISR_TABLE_OFFSET 8 ++ ++/*=====================================================================*/ ++/* Logical Peripheral Interrupt IDs */ ++/*=====================================================================*/ ++ ++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) ++#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) ++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) ++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4) ++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5) ++#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6) ++#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7) ++#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) ++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) ++#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10) ++#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11) ++#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12) ++#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13) ++#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) ++#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) ++#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) ++#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17) ++#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18) ++#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19) ++#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20) ++#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21) ++#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22) ++#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23) ++#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24) ++#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25) ++ ++#ifdef __cplusplus ++ } ++#endif ++ ++#endif /* __BCM6348_H */ ++ +diff -Naurp linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h +--- linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,508 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __BCM6348_MAP_H ++#define __BCM6348_MAP_H ++ ++#if __cplusplus ++extern "C" { ++#endif ++ ++#include "bcmtypes.h" ++ ++#define PERF_BASE 0xfffe0000 ++#define TIMR_BASE 0xfffe0200 ++#define UART_BASE 0xfffe0300 ++#define GPIO_BASE 0xfffe0400 ++#define MPI_BASE 0xfffe2000 /* MPI control registers */ ++#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */ ++#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */ ++ ++typedef struct PerfControl { ++ uint32 RevID; ++ uint16 testControl; ++ uint16 blkEnables; ++#define EMAC_CLK_EN 0x0010 ++#define SAR_CLK_EN 0x0020 ++#define USBS_CLK_EN 0x0040 ++#define USBH_CLK_EN 0x0100 ++ ++ uint32 pll_control; ++#define SOFT_RESET 0x00000001 ++ ++ uint32 IrqMask; ++ uint32 IrqStatus; ++ ++ uint32 ExtIrqCfg; ++#define EI_SENSE_SHFT 0 ++#define EI_STATUS_SHFT 5 ++#define EI_CLEAR_SHFT 10 ++#define EI_MASK_SHFT 15 ++#define EI_INSENS_SHFT 20 ++#define EI_LEVEL_SHFT 25 ++ ++ uint32 unused[4]; /* (18) */ ++ uint32 BlockSoftReset; /* (28) */ ++#define BSR_SPI 0x00000001 ++#define BSR_EMAC 0x00000004 ++#define BSR_USBH 0x00000008 ++#define BSR_USBS 0x00000010 ++#define BSR_ADSL 0x00000020 ++#define BSR_DMAMEM 0x00000040 ++#define BSR_SAR 0x00000080 ++#define BSR_ACLC 0x00000100 ++#define BSR_ADSL_MIPS_PLL 0x00000400 ++#define BSR_ALL_BLOCKS \ ++ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ ++ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) ++ uint32 unused2[2]; /* (2c) */ ++ uint32 PllStrap; /* (34) */ ++#define PLL_N1_SHFT 20 ++#define PLL_N1_MASK (7< thresh, txfifo= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) ) ++ ++ ++/* ++** External Bus Interface ++*/ ++typedef struct EbiChipSelect { ++ uint32 base; /* base address in upper 24 bits */ ++#define EBI_SIZE_8K 0 ++#define EBI_SIZE_16K 1 ++#define EBI_SIZE_32K 2 ++#define EBI_SIZE_64K 3 ++#define EBI_SIZE_128K 4 ++#define EBI_SIZE_256K 5 ++#define EBI_SIZE_512K 6 ++#define EBI_SIZE_1M 7 ++#define EBI_SIZE_2M 8 ++#define EBI_SIZE_4M 9 ++#define EBI_SIZE_8M 10 ++#define EBI_SIZE_16M 11 ++#define EBI_SIZE_32M 12 ++#define EBI_SIZE_64M 13 ++#define EBI_SIZE_128M 14 ++#define EBI_SIZE_256M 15 ++ uint32 config; ++#define EBI_ENABLE 0x00000001 /* .. enable this range */ ++#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ ++#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ ++#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ ++#define EBI_WREN 0x00000020 /* enable posted writes */ ++#define EBI_POLARITY 0x00000040 /* .. set to invert something, ++ ** don't know what yet */ ++#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ ++#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ ++#define EBI_FIFO 0x00000200 /* .. use fifo */ ++#define EBI_RE 0x00000400 /* .. Reverse Endian */ ++} EbiChipSelect; ++ ++typedef struct MpiRegisters { ++ EbiChipSelect cs[7]; /* size chip select configuration */ ++#define EBI_CS0_BASE 0 ++#define EBI_CS1_BASE 1 ++#define EBI_CS2_BASE 2 ++#define EBI_CS3_BASE 3 ++#define PCMCIA_COMMON_BASE 4 ++#define PCMCIA_ATTRIBUTE_BASE 5 ++#define PCMCIA_IO_BASE 6 ++ uint32 unused0[2]; /* reserved */ ++ uint32 ebi_control; /* ebi control */ ++ uint32 unused1[4]; /* reserved */ ++#define EBI_ACCESS_TIMEOUT 0x000007FF ++ uint32 pcmcia_cntl1; /* pcmcia control 1 */ ++#define PCCARD_CARD_RESET 0x00040000 ++#define CARDBUS_ENABLE 0x00008000 ++#define PCMCIA_ENABLE 0x00004000 ++#define PCMCIA_GPIO_ENABLE 0x00002000 ++#define CARDBUS_IDSEL 0x00001F00 ++#define VS2_OEN 0x00000080 ++#define VS1_OEN 0x00000040 ++#define VS2_OUT 0x00000020 ++#define VS1_OUT 0x00000010 ++#define VS2_IN 0x00000008 ++#define VS1_IN 0x00000004 ++#define CD2_IN 0x00000002 ++#define CD1_IN 0x00000001 ++#define VS_MASK 0x0000000C ++#define CD_MASK 0x00000003 ++ uint32 unused2; /* reserved */ ++ uint32 pcmcia_cntl2; /* pcmcia control 2 */ ++#define PCMCIA_BYTESWAP_DIS 0x00000002 ++#define PCMCIA_HALFWORD_EN 0x00000001 ++#define RW_ACTIVE_CNT_BIT 2 ++#define INACTIVE_CNT_BIT 8 ++#define CE_SETUP_CNT_BIT 16 ++#define CE_HOLD_CNT_BIT 24 ++ uint32 unused3[40]; /* reserved */ ++ ++ uint32 sp0range; /* PCI to internal system bus address space */ ++ uint32 sp0remap; ++ uint32 sp0cfg; ++ uint32 sp1range; ++ uint32 sp1remap; ++ uint32 sp1cfg; ++ ++ uint32 EndianCfg; ++ ++ uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */ ++#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */ ++#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */ ++#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */ ++#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */ ++#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */ ++#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */ ++ ++ uint32 l2pmrange1; /* internal system bus to PCI memory space */ ++#define PCI_SIZE_64K 0xFFFF0000 ++#define PCI_SIZE_128K 0xFFFE0000 ++#define PCI_SIZE_256K 0xFFFC0000 ++#define PCI_SIZE_512K 0xFFF80000 ++#define PCI_SIZE_1M 0xFFF00000 ++#define PCI_SIZE_2M 0xFFE00000 ++#define PCI_SIZE_4M 0xFFC00000 ++#define PCI_SIZE_8M 0xFF800000 ++#define PCI_SIZE_16M 0xFF000000 ++#define PCI_SIZE_32M 0xFE000000 ++ uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */ ++ uint32 l2pmremap1; ++#define CARDBUS_MEM 0x00000004 ++#define MEM_WINDOW_EN 0x00000001 ++ uint32 l2pmrange2; ++ uint32 l2pmbase2; ++ uint32 l2pmremap2; ++ uint32 l2piorange; /* internal system bus to PCI I/O space */ ++ uint32 l2piobase; ++ uint32 l2pioremap; ++ ++ uint32 pcimodesel; ++#define PCI2_INT_BUS_RD_PREFECH 0x000000F0 ++#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */ ++#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */ ++ ++ uint32 pciintstat; /* PCI interrupt mask/status */ ++#define MAILBOX1_SENT 0x08 ++#define MAILBOX0_SENT 0x04 ++#define MAILBOX1_MSG_RCV 0x02 ++#define MAILBOX0_MSG_RCV 0x01 ++ uint32 locbuscntrl; /* internal system bus control */ ++#define DIR_U2P_NOSWAP 0x00000002 ++#define EN_PCI_GPIO 0x00000001 ++ uint32 locintstat; /* internal system bus interrupt mask/status */ ++#define CSERR 0x0200 ++#define SERR 0x0100 ++#define EXT_PCI_INT 0x0080 ++#define DIR_FAILED 0x0040 ++#define DIR_COMPLETE 0x0020 ++#define PCI_CFG 0x0010 ++ uint32 unused5[7]; ++ ++ uint32 mailbox0; ++ uint32 mailbox1; ++ ++ uint32 pcicfgcntrl; /* internal system bus PCI configuration control */ ++#define PCI_CFG_REG_WRITE_EN 0x00000080 ++#define PCI_CFG_ADDR 0x0000003C ++ uint32 pcicfgdata; /* internal system bus PCI configuration data */ ++ ++ uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */ ++#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */ ++#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */ ++#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */ ++#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */ ++ uint32 locch2intStat; ++#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */ ++#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */ ++#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */ ++ uint32 locch2intMask; ++ uint32 unused6; ++ uint32 locch2descaddr; ++ uint32 locch2status1; ++#define LOCAL_DESC_STATE 0xE0000000 ++#define PCI_DESC_STATE 0x1C000000 ++#define BYTE_DONE 0x03FFC000 ++#define RING_ADDR 0x00003FFF ++ uint32 locch2status2; ++#define BUFPTR_OFFSET 0x1FFF0000 ++#define PCI_MASTER_STATE 0x000000C0 ++#define LOC_MASTER_STATE 0x00000038 ++#define CONTROL_STATE 0x00000007 ++ uint32 unused7; ++ ++ uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */ ++#define DMA_U2P_LE 0x00000200 /* local bus is little endian */ ++#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */ ++ uint32 locch1intstat; ++ uint32 locch1intmask; ++ uint32 unused8; ++ uint32 locch1descaddr; ++ uint32 locch1status1; ++ uint32 locch1status2; ++ uint32 unused9; ++ ++ uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */ ++ uint32 pcich1intstat; ++ uint32 pcich1intmask; ++ uint32 pcich1descaddr; ++ uint32 pcich1status1; ++ uint32 pcich1status2; ++ ++ uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */ ++ uint32 pcich2intstat; ++ uint32 pcich2intmask; ++ uint32 pcich2descaddr; ++ uint32 pcich2status1; ++ uint32 pcich2status2; ++ ++ uint32 perm_id; /* permanent device and vendor id */ ++ uint32 perm_rev; /* permanent revision id */ ++} MpiRegisters; ++ ++#define MPI ((volatile MpiRegisters * const) MPI_BASE) ++ ++/* PCI configuration address space start offset 0x40 */ ++#define BRCM_PCI_CONFIG_TIMER 0x40 ++#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00 ++#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF ++ ++/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */ ++#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */ ++#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */ ++ ++#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI) ++ ++#if __cplusplus ++} ++#endif ++ ++#endif ++ +diff -Naurp linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/bcmTag.h linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/bcmTag.h +--- linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/bcmTag.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/bcmTag.h 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,153 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++//************************************************************************************** ++// File Name : bcmTag.h ++// ++// Description: add tag with validation system to the firmware image file to be uploaded ++// via http ++// ++// Created : 02/28/2002 seanl ++//************************************************************************************** ++ ++#ifndef _BCMTAG_H_ ++#define _BCMTAG_H_ ++ ++ ++#define BCM_SIG_1 "Broadcom Corporation" ++#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id. ++ ++#define BCM_TAG_VER "6" ++#define BCM_TAG_VER_LAST "26" ++ ++// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars ++#define TAG_LEN 256 ++#define TAG_VER_LEN 4 ++#define SIG_LEN 20 ++#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID ++#define CHIP_ID_LEN 6 ++#define IMAGE_LEN 10 ++#define ADDRESS_LEN 12 ++#define FLAG_LEN 2 ++#define TOKEN_LEN 20 ++#define BOARD_ID_LEN 16 ++#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \ ++ (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN)) ++ ++ ++// TAG for downloadable image (kernel plus file system) ++typedef struct _FILE_TAG ++{ ++ unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here. ++ unsigned char signiture_1[SIG_LEN]; // text line for company info ++ unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number) ++ unsigned char chipId[CHIP_ID_LEN]; // chip id ++ unsigned char boardId[BOARD_ID_LEN]; // board id ++ unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host ++ unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length ++ unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address ++ unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text. ++ unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address ++ unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text. ++ unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address ++ unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text. ++ unsigned char dualImage[FLAG_LEN]; // if 1, dual image ++ unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active ++ unsigned char reserved[RESERVED_LEN]; // reserved for later use ++ unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for ++ // now will be 4 unsigned char crc ++ unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken) ++} FILE_TAG, *PFILE_TAG; ++ ++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ ++#define CRC_LEN 4 ++ ++// only included if for bcmTag.exe program ++#ifdef BCMTAG_EXE_USE ++ ++static unsigned long Crc32_table[256] = { ++ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, ++ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, ++ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, ++ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, ++ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, ++ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, ++ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, ++ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, ++ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, ++ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, ++ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, ++ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, ++ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, ++ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, ++ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, ++ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, ++ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, ++ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, ++ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, ++ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, ++ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, ++ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, ++ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, ++ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, ++ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, ++ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, ++ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, ++ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, ++ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, ++ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, ++ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, ++ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, ++ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, ++ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, ++ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, ++ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, ++ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, ++ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, ++ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, ++ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, ++ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, ++ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, ++ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, ++ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, ++ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, ++ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, ++ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, ++ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, ++ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, ++ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, ++ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, ++ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, ++ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, ++ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, ++ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, ++ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, ++ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, ++ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, ++ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, ++ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, ++ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, ++ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, ++ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, ++ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D ++}; ++#endif // BCMTAG_USE ++ ++ ++#endif // _BCMTAG_H_ ++ +diff -Naurp linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h +--- linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,59 @@ ++/* ++<:copyright-gpl ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __BCM_INTR_H ++#define __BCM_INTR_H ++ ++#ifdef __cplusplus ++ extern "C" { ++#endif ++ ++#if defined(CONFIG_BCM96338) ++#include <6338_intr.h> ++#endif ++#if defined(CONFIG_BCM96345) ++#include <6345_intr.h> ++#endif ++#if defined(CONFIG_BCM96348) ++#include <6348_intr.h> ++#endif ++ ++/* defines */ ++struct pt_regs; ++typedef int (*FN_HANDLER) (int, void *, struct pt_regs *); ++ ++/* prototypes */ ++extern void enable_brcm_irq(unsigned int irq); ++extern void disable_brcm_irq(unsigned int irq); ++extern int request_external_irq(unsigned int irq, ++ FN_HANDLER handler, unsigned long irqflags, ++ const char * devname, void *dev_id); ++extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param, ++ unsigned int interruptId); ++extern void dump_intr_regs(void); ++ ++/* compatibility definitions */ ++#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq ) ++#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq ) ++ ++#ifdef __cplusplus ++ } ++#endif ++ ++#endif +diff -Naurp linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h +--- linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,34 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __BCM_MAP_PART_H ++#define __BCM_MAP_PART_H ++ ++#if defined(CONFIG_BCM96338) ++#include <6338_map_part.h> ++#endif ++#if defined(CONFIG_BCM96345) ++#include <6345_map_part.h> ++#endif ++#if defined(CONFIG_BCM96348) ++#include <6348_map_part.h> ++#endif ++ ++#endif ++ +diff -Naurp linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/bcmpci.h linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/bcmpci.h +--- linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/bcmpci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/bcmpci.h 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,87 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++// ++// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition ++// ++#ifndef BCMPCI_H ++#define BCMPCI_H ++ ++/* Memory window in internal system bus address space */ ++#define BCM_PCI_MEM_BASE 0x08000000 ++/* IO window in internal system bus address space */ ++#define BCM_PCI_IO_BASE 0x0C000000 ++ ++#define BCM_PCI_ADDR_MASK 0x1fffffff ++ ++/* Memory window size (range) */ ++#define BCM_PCI_MEM_SIZE_16MB 0x01000000 ++/* IO window size (range) */ ++#define BCM_PCI_IO_SIZE_64KB 0x00010000 ++ ++/* PCI Configuration and I/O space acesss */ ++#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) ) ++ ++/* fake USB PCI slot */ ++#define USB_HOST_SLOT 9 ++#define USB_BAR0_MEM_SIZE 0x0800 ++ ++#define BCM_HOST_MEM_SPACE1 0x10000000 ++#define BCM_HOST_MEM_SPACE2 0x00000000 ++ ++/* ++ * EBI bus clock is 33MHz and share with PCI bus ++ * each clock cycle is 30ns. ++ */ ++/* attribute memory access wait cnt for 4306 */ ++#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns ++#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns ++#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4) ++#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns ++ ++/* common memory access wait cnt for 4306 */ ++#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns ++#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns ++#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4) ++#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns ++ ++#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also ++#define PCCARD_VCC_33V 0x00010000 ++#define PCCARD_VCC_50V 0x00020000 ++ ++typedef enum { ++ MPI_CARDTYPE_NONE, // No Card in slot ++ MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot ++ MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot ++} CardType; ++ ++#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus ++ ++#define pcmciaAttrOffset 0x00200000 ++#define pcmciaMemOffset 0x00000000 ++// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA. ++#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000) ++// Base Address is that mapped into the MPI ChipSelect registers. ++// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base. ++#define pcmciaBase 0xbf000000 ++#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase) ++#define pcmciaMem (pcmciaMemOffset | pcmciaBase) ++#define pcmciaIo (pcmciaIoOffset | pcmciaBase) ++ ++#endif +diff -Naurp linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h +--- linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,163 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++// ++// bcmtypes.h - misc useful typedefs ++// ++#ifndef BCMTYPES_H ++#define BCMTYPES_H ++ ++// These are also defined in typedefs.h in the application area, so I need to ++// protect against re-definition. ++ ++#ifndef _TYPEDEFS_H_ ++typedef unsigned char uint8; ++typedef unsigned short uint16; ++typedef unsigned long uint32; ++typedef signed char int8; ++typedef signed short int16; ++typedef signed long int32; ++#if !defined(__cplusplus) ++typedef int bool; ++#endif ++#endif ++ ++typedef unsigned char byte; ++// typedef unsigned long sem_t; ++ ++typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD; ++typedef signed long LONG,*PLONG; ++ ++typedef unsigned int *PUINT; ++typedef signed int INT; ++ ++typedef unsigned short *PUSHORT; ++typedef signed short SHORT,*PSHORT; ++typedef unsigned short WORD,*PWORD; ++ ++typedef unsigned char *PUCHAR; ++typedef signed char *PCHAR; ++ ++typedef void *PVOID; ++ ++typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN; ++ ++typedef unsigned char BYTE,*PBYTE; ++ ++//#ifndef __GNUC__ ++//The following has been defined in Vxworks internally: vxTypesOld.h ++//redefine under vxworks will cause error ++typedef signed int *PINT; ++ ++typedef signed char INT8; ++typedef signed short INT16; ++typedef signed long INT32; ++ ++typedef unsigned char UINT8; ++typedef unsigned short UINT16; ++typedef unsigned long UINT32; ++ ++typedef unsigned char UCHAR; ++typedef unsigned short USHORT; ++typedef unsigned int UINT; ++typedef unsigned long ULONG; ++ ++typedef void VOID; ++typedef unsigned char BOOL; ++ ++//#endif /* __GNUC__ */ ++ ++ ++// These are also defined in typedefs.h in the application area, so I need to ++// protect against re-definition. ++#ifndef TYPEDEFS_H ++ ++// Maximum and minimum values for a signed 16 bit integer. ++#define MAX_INT16 32767 ++#define MIN_INT16 -32768 ++ ++// Useful for true/false return values. This uses the ++// Taligent notation (k for constant). ++typedef enum ++{ ++ kFalse = 0, ++ kTrue = 1 ++} Bool; ++ ++#endif ++ ++/* macros to protect against unaligned accesses */ ++ ++#if 0 ++/* first arg is an address, second is a value */ ++#define PUT16( a, d ) { \ ++ *((byte *)a) = (byte)((d)>>8); \ ++ *(((byte *)a)+1) = (byte)(d); \ ++} ++ ++#define PUT32( a, d ) { \ ++ *((byte *)a) = (byte)((d)>>24); \ ++ *(((byte *)a)+1) = (byte)((d)>>16); \ ++ *(((byte *)a)+2) = (byte)((d)>>8); \ ++ *(((byte *)a)+3) = (byte)(d); \ ++} ++ ++/* first arg is an address, returns a value */ ++#define GET16( a ) ( \ ++ (*((byte *)a) << 8) | \ ++ (*(((byte *)a)+1)) \ ++) ++ ++#define GET32( a ) ( \ ++ (*((byte *)a) << 24) | \ ++ (*(((byte *)a)+1) << 16) | \ ++ (*(((byte *)a)+2) << 8) | \ ++ (*(((byte *)a)+3)) \ ++) ++#endif ++ ++#ifndef YES ++#define YES 1 ++#endif ++ ++#ifndef NO ++#define NO 0 ++#endif ++ ++#ifndef IN ++#define IN ++#endif ++ ++#ifndef OUT ++#define OUT ++#endif ++ ++#ifndef TRUE ++#define TRUE 1 ++#endif ++ ++#ifndef FALSE ++#define FALSE 0 ++#endif ++ ++#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr)) ++#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr)) ++#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr)) ++ ++#endif +diff -Naurp linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/board.h linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/board.h +--- linux-2.6.16.7-generic-patched/bcmdrivers/opensource/include/bcm963xx/board.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/bcmdrivers/opensource/include/bcm963xx/board.h 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,374 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/***********************************************************************/ ++/* */ ++/* MODULE: board.h */ ++/* DATE: 97/02/18 */ ++/* PURPOSE: Board specific information. This module should include */ ++/* all base device addresses and board specific macros. */ ++/* */ ++/***********************************************************************/ ++#ifndef _BOARD_H ++#define _BOARD_H ++ ++#if __cplusplus ++extern "C" { ++#endif ++/*****************************************************************************/ ++/* Misc board definitions */ ++/*****************************************************************************/ ++ ++#define DYING_GASP_API ++ ++/*****************************************************************************/ ++/* Physical Memory Map */ ++/*****************************************************************************/ ++ ++#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */ ++#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */ ++ ++/*****************************************************************************/ ++/* Note that the addresses above are physical addresses and that programs */ ++/* have to use converted addresses defined below: */ ++/*****************************************************************************/ ++#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ ++#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ ++#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ ++ ++/*****************************************************************************/ ++/* Select the PLL value to get the desired CPU clock frequency. */ ++/* */ ++/* */ ++/*****************************************************************************/ ++#define FPERIPH 50000000 ++ ++#define ONEK 1024 ++#define BLK64K (64*ONEK) ++#define FLASH45_BLKS_BOOT_ROM 1 ++#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K) ++#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/ ++ ++/*****************************************************************************/ ++/* Note that the addresses above are physical addresses and that programs */ ++/* have to use converted addresses defined below: */ ++/*****************************************************************************/ ++#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ ++#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ ++#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ ++ ++/*****************************************************************************/ ++/* Select the PLL value to get the desired CPU clock frequency. */ ++/* */ ++/* */ ++/*****************************************************************************/ ++#define FPERIPH 50000000 ++ ++#define SDRAM_TYPE_ADDRESS_OFFSET 16 ++#define NVRAM_DATA_OFFSET 0x0580 ++#define NVRAM_DATA_ID 0x0f1e2d3c ++#define BOARD_SDRAM_TYPE *(unsigned long *) \ ++ (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET) ++ ++#define ONEK 1024 ++#define BLK64K (64*ONEK) ++ ++// nvram and psi flash definitions for 45 ++#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram ++#define NVRAM_PSI_DEFAULT 24 // default psi in K byes ++ ++/*****************************************************************************/ ++/* NVRAM Offset and definition */ ++/*****************************************************************************/ ++ ++#define NVRAM_VERSION_NUMBER 2 ++#define NVRAM_VERSION_NUMBER_ADDRESS 0 ++ ++#define NVRAM_BOOTLINE_LEN 256 ++#define NVRAM_BOARD_ID_STRING_LEN 16 ++#define NVRAM_MAC_ADDRESS_LEN 6 ++#define NVRAM_MAC_COUNT_MAX 32 ++ ++/*****************************************************************************/ ++/* Misc Offsets */ ++/*****************************************************************************/ ++ ++#define CFE_VERSION_OFFSET 0x0570 ++#define CFE_VERSION_MARK_SIZE 5 ++#define CFE_VERSION_SIZE 5 ++ ++typedef struct ++{ ++ unsigned long ulVersion; ++ char szBootline[NVRAM_BOOTLINE_LEN]; ++ char szBoardId[NVRAM_BOARD_ID_STRING_LEN]; ++ unsigned long ulReserved1[2]; ++ unsigned long ulNumMacAddrs; ++ unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; ++ char chReserved[2]; ++ unsigned long ulCheckSum; ++} NVRAM_DATA, *PNVRAM_DATA; ++ ++ ++/*****************************************************************************/ ++/* board ioctl calls for flash, led and some other utilities */ ++/*****************************************************************************/ ++ ++ ++/* Defines. for board driver */ ++#define BOARD_IOCTL_MAGIC 'B' ++#define BOARD_DRV_MAJOR 206 ++ ++#define MAC_ADDRESS_ANY (unsigned long) -1 ++ ++#define BOARD_IOCTL_FLASH_INIT \ ++ _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_FLASH_WRITE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_FLASH_READ \ ++ _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_NR_PAGES \ ++ _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_DUMP_ADDR \ ++ _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_SET_MEMORY \ ++ _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_MIPS_SOFT_RESET \ ++ _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_LED_CTRL \ ++ _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_ID \ ++ _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_MAC_ADDRESS \ ++ _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \ ++ _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_PSI_SIZE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_SDRAM_SIZE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_SET_MONITOR_FD \ ++ _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \ ++ _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_BOOTLINE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_SET_BOOTLINE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \ ++ _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_CHIP_ID \ ++ _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_NUM_ENET \ ++ _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_CFE_VER \ ++ _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_ENET_CFG \ ++ _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_SET_TRIGGER_EVENT \ ++ _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_TRIGGER_EVENT \ ++ _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \ ++ _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_SET_SES_LED \ ++ _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS) ++ ++//<>JUNHON, 2004/09/15 ++ ++// for the action in BOARD_IOCTL_PARMS for flash operation ++typedef enum ++{ ++ PERSISTENT, ++ NVRAM, ++ BCM_IMAGE_CFE, ++ BCM_IMAGE_FS, ++ BCM_IMAGE_KERNEL, ++ BCM_IMAGE_WHOLE, ++ SCRATCH_PAD, ++ FLASH_SIZE, ++} BOARD_IOCTL_ACTION; ++ ++ ++typedef struct boardIoctParms ++{ ++ char *string; ++ char *buf; ++ int strLen; ++ int offset; ++ BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */ ++ int result; ++} BOARD_IOCTL_PARMS; ++ ++ ++// LED defines ++typedef enum ++{ ++ kLedAdsl, ++ kLedWireless, ++ kLedUsb, ++ kLedHpna, ++ kLedWanData, ++ kLedPPP, ++ kLedVoip, ++ kLedSes, ++ kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end. ++} BOARD_LED_NAME; ++ ++typedef enum ++{ ++ kLedStateOff, /* turn led off */ ++ kLedStateOn, /* turn led on */ ++ kLedStateFail, /* turn led on red */ ++ kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */ ++ kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */ ++ kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */ ++} BOARD_LED_STATE; ++ ++ ++// virtual and physical map pair defined in board.c ++typedef struct ledmappair ++{ ++ BOARD_LED_NAME ledName; // virtual led name ++ BOARD_LED_STATE ledInitState; // initial led state when the board boots. ++ unsigned short ledMask; // physical GPIO pin mask ++ unsigned short ledActiveLow; // reset bit to turn on LED ++ unsigned short ledMaskFail; // physical GPIO pin mask for state failure ++ unsigned short ledActiveLowFail;// reset bit to turn on LED ++} LED_MAP_PAIR, *PLED_MAP_PAIR; ++ ++typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState); ++ ++/* Flash storage address information that is determined by the flash driver. */ ++typedef struct flashaddrinfo ++{ ++ int flash_persistent_start_blk; ++ int flash_persistent_number_blk; ++ int flash_persistent_length; ++ unsigned long flash_persistent_blk_offset; ++ int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN) ++ int flash_scratch_pad_number_blk; ++ int flash_scratch_pad_length; ++ unsigned long flash_scratch_pad_blk_offset; ++ int flash_nvram_start_blk; ++ int flash_nvram_number_blk; ++ int flash_nvram_length; ++ unsigned long flash_nvram_blk_offset; ++} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO; ++ ++// scratch pad defines ++/* SP - Persisten Scratch Pad format: ++ sp header : 32 bytes ++ tokenId-1 : 8 bytes ++ tokenId-1 len : 4 bytes ++ tokenId-1 data ++ .... ++ tokenId-n : 8 bytes ++ tokenId-n len : 4 bytes ++ tokenId-n data ++*/ ++ ++#define MAGIC_NUM_LEN 8 ++#define MAGIC_NUMBER "gOGoBrCm" ++#define TOKEN_NAME_LEN 16 ++#define SP_VERSION 1 ++#define SP_MAX_LEN 8 * 1024 // 8k buf before psi ++#define SP_RESERVERD 16 ++ ++typedef struct _SP_HEADER ++{ ++ char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number ++ int SPVersion; // version number ++ int SPUsedLen; // used sp len ++ char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes ++} SP_HEADER, *PSP_HEADER; ++ ++typedef struct _TOKEN_DEF ++{ ++ char tokenName[TOKEN_NAME_LEN]; ++ int tokenLen; ++} SP_TOKEN, *PSP_TOKEN; ++ ++ ++/*****************************************************************************/ ++/* Function Prototypes */ ++/*****************************************************************************/ ++#if !defined(__ASM_ASM_H) ++void dumpaddr( unsigned char *pAddr, int nLen ); ++ ++void kerSysFlashAddrInfoGet(PFLASH_ADDR_INFO pflash_addr_info); ++int kerSysNvRamGet(char *string, int strLen, int offset); ++int kerSysNvRamSet(char *string, int strLen, int offset); ++int kerSysPersistentGet(char *string, int strLen, int offset); ++int kerSysPersistentSet(char *string, int strLen, int offset); ++int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen); ++int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen); ++int kerSysBcmImageSet( int flash_start_addr, char *string, int size); ++int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId ); ++int kerSysReleaseMacAddress( unsigned char *pucaAddr ); ++int kerSysGetSdramSize( void ); ++void kerSysGetBootline(char *string, int strLen); ++void kerSysSetBootline(char *string, int strLen); ++void kerSysMipsSoftReset(void); ++void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); ++void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int ); ++int kerSysFlashSizeGet(void); ++void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context); ++void kerSysDeregisterDyingGaspHandler(char *devname); ++void kerSysWakeupMonitorTask( void ); ++#endif ++ ++#if __cplusplus ++} ++#endif ++ ++#endif /* _BOARD_H */ ++ diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/030-boardparms.patch b/openwrt/target/linux/brcm63xx-2.6/patches/030-boardparms.patch new file mode 100644 index 0000000000..f6ce12ce34 --- /dev/null +++ b/openwrt/target/linux/brcm63xx-2.6/patches/030-boardparms.patch @@ -0,0 +1,3186 @@ +diff -Naurp linux-2.6.16.7-generic-patched/boardparms/bcm963xx/Makefile linux-2.6.16.7-patched/boardparms/bcm963xx/Makefile +--- linux-2.6.16.7-generic-patched/boardparms/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/boardparms/bcm963xx/Makefile 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,16 @@ ++ ++ifeq ($(CONFIG_MIPS_BRCM),y) ++ ++# Linux ++obj-y += boardparms.o ++EXTRA_CFLAGS += -DCONFIG_BCM9$(BRCM_CHIP) ++-include $(TOPDIR)/Rules.make ++ ++else ++ ++# CFE ++BSPOBJS += boardparms.o ++ ++endif ++ ++ +diff -Naurp linux-2.6.16.7-generic-patched/boardparms/bcm963xx/boardparms.c linux-2.6.16.7-patched/boardparms/bcm963xx/boardparms.c +--- linux-2.6.16.7-generic-patched/boardparms/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/boardparms/bcm963xx/boardparms.c 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,2392 @@ ++/* ++<:copyright-gpl ++ ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ ++:> ++*/ ++/************************************************************************** ++ * File Name : boardparms.c ++ * ++ * Description: This file contains the implementation for the BCM63xx board ++ * parameter access functions. ++ * ++ * Updates : 07/14/2003 Created. ++ ***************************************************************************/ ++ ++/* Includes. */ ++#include ++#include "boardparms.h" ++ ++/* Defines. */ ++ ++/* Default psi size in K bytes */ ++#define BP_PSI_DEFAULT_SIZE 24 ++ ++/* Typedefs */ ++typedef struct boardparameters ++{ ++ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */ ++ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS]; ++ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP]; ++ unsigned short usSdramSize; /* SDRAM size and type */ ++ unsigned short usPsiSize; /* persistent storage in K bytes */ ++ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */ ++ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */ ++ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */ ++ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */ ++ unsigned short usGpioUartRts; /* GPIO pin or not defined */ ++ unsigned short usGpioUartCts; /* GPIO pin or not defined */ ++ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */ ++ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */ ++ unsigned short usGpioLedWireless; /* GPIO pin or not defined */ ++ unsigned short usGpioLedUsb; /* GPIO pin or not defined */ ++ unsigned short usGpioLedHpna; /* GPIO pin or not defined */ ++ unsigned short usGpioLedWanData; /* GPIO pin or not defined */ ++ unsigned short usGpioLedPpp; /* GPIO pin or not defined */ ++ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */ ++ unsigned short usExtIntrWireless; /* ext intr or not defined */ ++ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */ ++ unsigned short usExtIntrHpna; /* ext intr or not defined */ ++ unsigned short usCsHpna; /* chip select not defined */ ++ unsigned short usAntInUseWireless; /* antenna in use or not defined */ ++ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */ ++ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */ ++ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */ ++} BOARD_PARAMETERS, *PBOARD_PARAMETERS; ++ ++/* Variables */ ++#if defined(_BCM96338_) || defined(CONFIG_BCM96338) ++static BOARD_PARAMETERS g_bcm96338sv = ++{ ++ "96338SV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_NOT_DEFINED, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ ++ BP_NOT_DEFINED, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++static BOARD_PARAMETERS g_bcm96338l2m8m = ++{ ++ "96338L-2M-8M", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96338sv, &g_bcm96338l2m8m, 0}; ++#endif ++ ++#if defined(_BCM96345_) || defined(CONFIG_BCM96345) ++static BOARD_PARAMETERS g_bcm96345r = ++{ ++ "96345R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345gw2 = ++{ ++ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold ++ * Reset or RTS. ++ */ ++ "96345GW2", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_GPIO_0_AH, /* usGpioPhySpiSck */ ++ BP_GPIO_4_AH, /* usGpioPhySpiSs */ ++ BP_GPIO_12_AH, /* usGpioPhySpiMosi */ ++ BP_GPIO_11_AH, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_GPIO, /* usConfigType */ ++ BP_ENET_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_1, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_15_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_GPIO_2_AH, /* usGpioPcmciaReset */ ++ BP_GPIO_13_AH, /* usGpioUartRts */ ++ BP_GPIO_9_AH, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_GPIO_7_AH, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_EXT_INTR_2, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345gw = ++{ ++ "96345GW", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_1, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_15_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_1_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_GPIO_2_AH, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_GPIO_10_AH, /* usGpioLedWireless */ ++ BP_GPIO_7_AH, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_EXT_INTR_2, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_EXT_INTR_3, /* usExtIntrHpna */ ++ BP_CS_1, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96335r = ++{ ++ "96335R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_9_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_9_AH, /* usGpioLedWanData */ ++ BP_GPIO_8_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_9_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345r0 = ++{ ++ "96345R0", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_9_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345rs = ++{ ++ "96345RS", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0, ++ &g_bcm96345rs, 0}; ++#endif ++ ++#if defined(_BCM96348_) || defined(CONFIG_BCM96348) ++ ++static BOARD_PARAMETERS g_bcm96348r = ++{ ++ "96348R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348lv = ++{ ++ "96348LV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ ++ 0x02, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_GPIO_5_AL, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348gw = ++{ ++ "96348GW", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcm96348gw_10 = ++{ ++ "96348GW-10", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348gw_11 = ++{ ++ "96348GW-11", /* szBoardId */ ++ {{BP_ENET_NO_PHY}, /* ucPhyType */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348sv = ++{ ++ "96348SV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ ++ 0x1f, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_NOT_DEFINED, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ ++ BP_NOT_DEFINED, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcm96348gw_dualDsp = ++{ ++ "96348GW-DualDSP", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_UNEQUIPPED, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_DSP, /* ucDspType */ ++ 0x01, /* ucDspAddress */ ++ BP_EXT_INTR_3, /* usExtIntrVoip */ ++ BP_UNEQUIPPED , /* usGpioVoipReset */ ++ BP_GPIO_35_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_3}}, /* usCsVoip */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcmCustom_01 = ++{ ++ "BCMCUST_01", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_36_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AL, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10, ++ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp, ++ &g_bcmCustom_01, 0}; ++#endif ++ ++static PBOARD_PARAMETERS g_pCurrentBp = 0; ++ ++/************************************************************************** ++ * Name : bpstrcmp ++ * ++ * Description: String compare for this file so it does not depend on an OS. ++ * (Linux kernel and CFE share this source file.) ++ * ++ * Parameters : [IN] dest - destination string ++ * [IN] src - source string ++ * ++ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src ++ ***************************************************************************/ ++static int bpstrcmp(const char *dest,const char *src); ++static int bpstrcmp(const char *dest,const char *src) ++{ ++ while (*src && *dest) ++ { ++ if (*dest < *src) return -1; ++ if (*dest > *src) return 1; ++ dest++; ++ src++; ++ } ++ ++ if (*dest && !*src) return 1; ++ if (!*dest && *src) return -1; ++ return 0; ++} /* bpstrcmp */ ++ ++/************************************************************************** ++ * Name : BpGetVoipDspConfig ++ * ++ * Description: Gets the DSP configuration from the board parameter ++ * structure for a given DSP index. ++ * ++ * Parameters : [IN] dspNum - DSP index (number) ++ * ++ * Returns : Pointer to DSP configuration block if found/valid, NULL ++ * otherwise. ++ ***************************************************************************/ ++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ); ++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ) ++{ ++ VOIP_DSP_INFO *pDspConfig = 0; ++ int i; ++ ++ if( g_pCurrentBp ) ++ { ++ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ ) ++ { ++ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP && ++ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum ) ++ { ++ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i]; ++ break; ++ } ++ } ++ } ++ ++ return pDspConfig; ++} ++ ++ ++/************************************************************************** ++ * Name : BpSetBoardId ++ * ++ * Description: This function find the BOARD_PARAMETERS structure for the ++ * specified board id string and assigns it to a global, static ++ * variable. ++ * ++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not ++ * have a board parameters configuration record. ++ ***************************************************************************/ ++int BpSetBoardId( char *pszBoardId ) ++{ ++ int nRet = BP_BOARD_ID_NOT_FOUND; ++ PBOARD_PARAMETERS *ppBp; ++ ++ for( ppBp = g_BoardParms; *ppBp; ppBp++ ) ++ { ++ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) ) ++ { ++ g_pCurrentBp = *ppBp; ++ nRet = BP_SUCCESS; ++ break; ++ } ++ } ++ ++ return( nRet ); ++} /* BpSetBoardId */ ++ ++/************************************************************************** ++ * Name : BpGetBoardIds ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id ++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN ++ * boundary. ++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that ++ * were allocated in pszBoardIds. ++ * ++ * Returns : Number of board id strings returned. ++ ***************************************************************************/ ++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ) ++{ ++ PBOARD_PARAMETERS *ppBp; ++ int i; ++ char *src; ++ char *dest; ++ ++ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize; ++ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN ) ++ { ++ dest = pszBoardIds; ++ src = (*ppBp)->szBoardId; ++ while( *src ) ++ *dest++ = *src++; ++ *dest = '\0'; ++ } ++ ++ return( i ); ++} /* BpGetBoardIds */ ++ ++/************************************************************************** ++ * Name : BpGetEthernetMacInfo ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO ++ * buffers. ++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that ++ * are pointed to by pEnetInfos. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ) ++{ ++ int i, nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) ++ { ++ if( i < BP_MAX_ENET_MACS ) ++ { ++ unsigned char *src = (unsigned char *) ++ &g_pCurrentBp->EnetMacInfos[i]; ++ unsigned char *dest = (unsigned char *) pEnetInfos; ++ int len = sizeof(ETHERNET_MAC_INFO); ++ while( len-- ) ++ *dest++ = *src++; ++ } ++ else ++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; ++ } ++ ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) ++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; ++ ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetEthernetMacInfo */ ++ ++/************************************************************************** ++ * Name : BpGetSdramSize ++ * ++ * Description: This function returns a constant that describees the board's ++ * SDRAM type and size. ++ * ++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size ++ * is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetSdramSize( unsigned long *pulSdramSize ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulSdramSize = g_pCurrentBp->usSdramSize; ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ *pulSdramSize = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetSdramSize */ ++ ++/************************************************************************** ++ * Name : BpGetPsiSize ++ * ++ * Description: This function returns the persistent storage size in K bytes. ++ * ++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent ++ * storage size is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetPsiSize( unsigned long *pulPsiSize ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulPsiSize = g_pCurrentBp->usPsiSize; ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ *pulPsiSize = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPsiSize */ ++ ++/************************************************************************** ++ * Name : BpGetRj11InnerOuterPairGpios ++ * ++ * Description: This function returns the GPIO pin assignments for changing ++ * between the RJ11 inner pair and RJ11 outer pair. ++ * ++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair ++ * GPIO pin is returned in. ++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, ++ unsigned short *pusOuter ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusInner = g_pCurrentBp->usGpioRj11InnerPair; ++ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair; ++ ++ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED && ++ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusInner = *pusOuter = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetRj11InnerOuterPairGpios */ ++ ++/************************************************************************** ++ * Name : BpGetPressAndHoldResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the press ++ * and hold reset button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the press and hold ++ * reset button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPressAndHoldResetGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset; ++ ++ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPressAndHoldResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioVoipReset; ++ ++ if( *pusValue != BP_NOT_DEFINED || ++ *pusValue == BP_UNEQUIPPED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipIntrGpio ++ * ++ * Description: This function returns the GPIO pin assignment for VoIP interrupt. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioVoipIntr; ++ ++ if( *pusValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipIntrGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPcmciaResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PCMCIA ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPcmciaResetGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioPcmciaReset; ++ ++ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPcmciaResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetUartRtsCtsGpios ++ * ++ * Description: This function returns the GPIO pin assignments for RTS and CTS ++ * UART signals. ++ * ++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO ++ * pin is returned in. ++ * [OUT] pusCts - Address of short word that the UART CTS GPIO ++ * pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, board id input string does not ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusRts = g_pCurrentBp->usGpioUartRts; ++ *pusCts = g_pCurrentBp->usGpioUartCts; ++ ++ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED && ++ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusRts = *pusCts = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetUartRtsCtsGpios */ ++ ++/************************************************************************** ++ * Name : BpGetAdslLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedAdsl; ++ ++ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetAdslFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED that is used when there is a DSL connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslFailLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedAdslFail; ++ ++ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslFailLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedWireless; ++ ++ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessAntInUse ++ * ++ * Description: This function returns the antennas in use for wireless ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna ++ * is in use. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessAntInUse( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usAntInUseWireless; ++ ++ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessAntInUse */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesBtnGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesBtnGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioSesBtnWireless; ++ ++ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessSesBtnGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesExtIntr ++ * ++ * Description: This function returns the external interrupt number for the ++ * Wireless Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * external interrup is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesExtIntr( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless; ++ ++ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++ ++} /* BpGetWirelessSesExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Led. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Led GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedSesWireless; ++ ++ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++ ++} /* BpGetWirelessSesLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetUsbLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the USB ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the USB LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetUsbLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedUsb; ++ ++ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetUsbLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the HPNA ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedHpna; ++ ++ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWanDataLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the WAN Data ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWanDataLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedWanData; ++ ++ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWanDataLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPppLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedPpp; ++ ++ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPppLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPppFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED that is used when there is a PPP connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppFailLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedPppFail; ++ ++ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPppFailLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderPowerOnLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the power ++ * on LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn; ++ ++ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderPowerOn */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderAlarmLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the alarm ++ * LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlAlarm; ++ ++ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderAlarmLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderResetCfgLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the reset ++ * configuration LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the reset ++ * configuration LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg; ++ ++ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderResetCfgLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderStopLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the break ++ * into bootloader LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the break into ++ * bootloader LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderStopLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlStop; ++ ++ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderStopLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ * ++ * Note : The VoIP structure would allow for having one LED per DSP ++ * however, the board initialization function assumes only one ++ * LED per functionality (ie one LED for VoIP). Therefore in ++ * order to keep this tidy and simple we do not make usage of the ++ * one-LED-per-DSP function. Instead, we assume that the LED for ++ * VoIP is unique and associated with DSP 0 (always present on ++ * any VoIP platform). If changing this to a LED-per-DSP function ++ * then one need to update the board initialization driver in ++ * bcmdrivers\opensource\char\board\bcm963xx\impl1 ++ ***************************************************************************/ ++int BpGetVoipLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioLedVoip; ++ ++ if( *pusValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessExtIntr ++ * ++ * Description: This function returns the Wireless external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the wireless ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrWireless; ++ ++ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetAdslDyingGaspExtIntr ++ * ++ * Description: This function returns the ADSL Dying Gasp external interrupt ++ * number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp; ++ ++ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslDyingGaspExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetVoipExtIntr ++ * ++ * Description: This function returns the VOIP external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * external interrupt number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pulValue = pDspInfo->usExtIntrVoip; ++ ++ if( *pulValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaExtIntr ++ * ++ * Description: This function returns the HPNA external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrHpna; ++ ++ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaChipSelect ++ * ++ * Description: This function returns the HPNA chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * chip select number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaChipSelect( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usCsHpna; ++ ++ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaChipSelect */ ++ ++/************************************************************************** ++ * Name : BpGetVoipChipSelect ++ * ++ * Description: This function returns the VOIP chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * chip select number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pulValue = pDspInfo->usCsVoip; ++ ++ if( *pulValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipChipSelect */ ++ +diff -Naurp linux-2.6.16.7-generic-patched/boardparms/bcm963xx/boardparms.h linux-2.6.16.7-patched/boardparms/bcm963xx/boardparms.h +--- linux-2.6.16.7-generic-patched/boardparms/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-patched/boardparms/bcm963xx/boardparms.h 2006-07-05 15:21:58.000000000 +0200 +@@ -0,0 +1,766 @@ ++/* ++<:copyright-gpl ++ ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ ++:> ++*/ ++/************************************************************************** ++ * File Name : boardparms.h ++ * ++ * Description: This file contains definitions and function prototypes for ++ * the BCM63xx board parameter access functions. ++ * ++ * Updates : 07/14/2003 Created. ++ ***************************************************************************/ ++ ++#if !defined(_BOARDPARMS_H) ++#define _BOARDPARMS_H ++ ++#if __cplusplus ++extern "C" { ++#endif ++ ++/* Return codes. */ ++#define BP_SUCCESS 0 ++#define BP_BOARD_ID_NOT_FOUND 1 ++#define BP_VALUE_NOT_DEFINED 2 ++#define BP_BOARD_ID_NOT_SET 3 ++ ++/* Values for BpGetSdramSize. */ ++#define BP_MEMORY_8MB_1_CHIP 0 ++#define BP_MEMORY_16MB_1_CHIP 1 ++#define BP_MEMORY_32MB_1_CHIP 2 ++#define BP_MEMORY_64MB_2_CHIP 3 ++#define BP_MEMORY_32MB_2_CHIP 4 ++#define BP_MEMORY_16MB_2_CHIP 5 ++ ++/* Values for EthernetMacInfo PhyType. */ ++#define BP_ENET_NO_PHY 0 ++#define BP_ENET_INTERNAL_PHY 1 ++#define BP_ENET_EXTERNAL_PHY 2 ++#define BP_ENET_EXTERNAL_SWITCH 3 ++ ++/* Values for EthernetMacInfo Configuration type. */ ++#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */ ++#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */ ++#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */ ++ ++/* Values for EthernetMacInfo Reverse MII. */ ++#define BP_ENET_NO_REVERSE_MII 0 ++#define BP_ENET_REVERSE_MII 1 ++ ++/* Values for VoIPDSPInfo DSPType. */ ++#define BP_VOIP_NO_DSP 0 ++#define BP_VOIP_DSP 1 ++ ++ ++/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */ ++#define BP_ACTIVE_MASK 0x8000 ++#define BP_ACTIVE_HIGH 0x0000 ++#define BP_ACTIVE_LOW 0x8000 ++#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH) ++#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW) ++#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH) ++#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW) ++#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH) ++#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW) ++#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH) ++#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW) ++#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH) ++#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW) ++#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH) ++#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW) ++#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH) ++#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW) ++#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH) ++#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW) ++#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH) ++#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW) ++#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH) ++#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW) ++#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH) ++#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW) ++#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH) ++#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW) ++#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH) ++#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW) ++#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH) ++#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW) ++#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH) ++#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW) ++#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH) ++#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW) ++#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH) ++#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW) ++#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH) ++#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW) ++#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH) ++#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW) ++#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH) ++#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW) ++#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH) ++#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW) ++#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH) ++#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW) ++#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH) ++#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW) ++#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH) ++#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW) ++#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH) ++#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW) ++#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH) ++#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW) ++#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH) ++#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW) ++#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH) ++#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW) ++#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH) ++#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW) ++#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH) ++#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW) ++#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH) ++#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW) ++#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH) ++#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW) ++#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH) ++#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW) ++#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH) ++#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW) ++#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH) ++#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW) ++#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH) ++#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW) ++#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH) ++#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW) ++ ++/* Values for external interrupt assignments. */ ++#define BP_EXT_INTR_0 0 ++#define BP_EXT_INTR_1 1 ++#define BP_EXT_INTR_2 2 ++#define BP_EXT_INTR_3 3 ++ ++/* Values for chip select assignments. */ ++#define BP_CS_0 0 ++#define BP_CS_1 1 ++#define BP_CS_2 2 ++#define BP_CS_3 3 ++ ++/* Value for GPIO and external interrupt fields that are not used. */ ++#define BP_NOT_DEFINED 0xffff ++#define BP_HW_DEFINED 0xfff0 ++#define BP_UNEQUIPPED 0xfff1 ++ ++/* Maximum size of the board id string. */ ++#define BP_BOARD_ID_LEN 16 ++ ++/* Maximum number of Ethernet MACs. */ ++#define BP_MAX_ENET_MACS 2 ++ ++/* Maximum number of VoIP DSPs. */ ++#define BP_MAX_VOIP_DSP 2 ++ ++/* Wireless Antenna Settings. */ ++#define BP_WLAN_ANT_MAIN 0 ++#define BP_WLAN_ANT_AUX 1 ++#define BP_WLAN_ANT_BOTH 3 ++ ++#if !defined(__ASSEMBLER__) ++ ++/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY, ++ * then the other fields are not valid. ++ */ ++typedef struct EthernetMacInfo ++{ ++ unsigned char ucPhyType; /* BP_ENET_xxx */ ++ unsigned char ucPhyAddress; /* 0 to 31 */ ++ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */ ++ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */ ++ unsigned short numSwitchPorts; /* Number of PHY ports */ ++ unsigned short usConfigType; /* Configuration type */ ++ unsigned short usReverseMii; /* Reverse MII */ ++} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO; ++ ++ ++/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP, ++ * then the other fields are not valid. ++ */ ++typedef struct VoIPDspInfo ++{ ++ unsigned char ucDspType; ++ unsigned char ucDspAddress; ++ unsigned short usExtIntrVoip; ++ unsigned short usGpioVoipReset; ++ unsigned short usGpioVoipIntr; ++ unsigned short usGpioLedVoip; ++ unsigned short usCsVoip; ++ ++} VOIP_DSP_INFO; ++ ++ ++/************************************************************************** ++ * Name : BpSetBoardId ++ * ++ * Description: This function find the BOARD_PARAMETERS structure for the ++ * specified board id string and assigns it to a global, static ++ * variable. ++ * ++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not ++ * have a board parameters configuration record. ++ ***************************************************************************/ ++int BpSetBoardId( char *pszBoardId ); ++ ++/************************************************************************** ++ * Name : BpGetBoardIds ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id ++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN ++ * boundary. ++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that ++ * were allocated in pszBoardIds. ++ * ++ * Returns : Number of board id strings returned. ++ ***************************************************************************/ ++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ); ++ ++/************************************************************************** ++ * Name : BpGetEthernetMacInfo ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO ++ * buffers. ++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that ++ * are pointed to by pEnetInfos. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ); ++ ++/************************************************************************** ++ * Name : BpGetSdramSize ++ * ++ * Description: This function returns a constant that describees the board's ++ * SDRAM type and size. ++ * ++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size ++ * is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetSdramSize( unsigned long *pulSdramSize ); ++ ++/************************************************************************** ++ * Name : BpGetPsiSize ++ * ++ * Description: This function returns the persistent storage size in K bytes. ++ * ++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent ++ * storage size is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetPsiSize( unsigned long *pulPsiSize ); ++ ++/************************************************************************** ++ * Name : BpGetRj11InnerOuterPairGpios ++ * ++ * Description: This function returns the GPIO pin assignments for changing ++ * between the RJ11 inner pair and RJ11 outer pair. ++ * ++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair ++ * GPIO pin is returned in. ++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, ++ unsigned short *pusOuter ); ++ ++/************************************************************************** ++ * Name : BpGetPressAndHoldResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the press ++ * and hold reset button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the press and hold ++ * reset button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPressAndHoldResetGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipIntrGpio ++ * ++ * Description: This function returns the GPIO pin assignment for VoIP interrupt. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPcmciaResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PCMCIA ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPcmciaResetGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetUartRtsCtsGpios ++ * ++ * Description: This function returns the GPIO pin assignments for RTS and CTS ++ * UART signals. ++ * ++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO ++ * pin is returned in. ++ * [OUT] pusCts - Address of short word that the UART CTS GPIO ++ * pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ); ++ ++/************************************************************************** ++ * Name : BpGetAdslLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetAdslFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED that is used when there is a DSL connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslFailLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessAntInUse ++ * ++ * Description: This function returns the antennas in use for wireless ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna ++ * is in use. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessAntInUse( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesBtnGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesBtnGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesExtIntr ++ * ++ * Description: This function returns the external interrupt number for the ++ * Wireless Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * external interrup is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesExtIntr( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Led. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Led GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetUsbLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the USB ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the USB LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetUsbLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the HPNA ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWanDataLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the WAN Data ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWanDataLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPppLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPppFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED that is used when there is a PPP connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppFailLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderPowerOnLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the power ++ * on LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderAlarmLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the alarm ++ * LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderResetCfgLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the reset ++ * configuration LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the reset ++ * configuration LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderStopLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the break ++ * into bootloader LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the break into ++ * bootloader LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderStopLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessExtIntr ++ * ++ * Description: This function returns the Wireless external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the wireless ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetAdslDyingGaspExtIntr ++ * ++ * Description: This function returns the ADSL Dying Gasp external interrupt ++ * number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipExtIntr ++ * ++ * Description: This function returns the VOIP external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * external interrupt number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaExtIntr ++ * ++ * Description: This function returns the HPNA external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaChipSelect ++ * ++ * Description: This function returns the HPNA chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * chip select number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaChipSelect( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipChipSelect ++ * ++ * Description: This function returns the VOIP chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * chip select number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ); ++ ++#endif /* __ASSEMBLER__ */ ++ ++#if __cplusplus ++} ++#endif ++ ++#endif /* _BOARDPARMS_H */ ++ diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/040-bcm963xx_flashmap.patch b/openwrt/target/linux/brcm63xx-2.6/patches/040-bcm963xx_flashmap.patch new file mode 100644 index 0000000000..d8acdfa9a0 --- /dev/null +++ b/openwrt/target/linux/brcm63xx-2.6/patches/040-bcm963xx_flashmap.patch @@ -0,0 +1,135 @@ +diff -urN linux-2.6.16.7/drivers/mtd/maps/bcm963xx.c linux-2.6.16.7-brcm63xx/drivers/mtd/maps/bcm963xx.c +--- linux-2.6.16.7/drivers/mtd/maps/bcm963xx.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7-brcm63xx/drivers/mtd/maps/bcm963xx.c 2006-07-07 22:00:36.000000000 +0200 +@@ -0,0 +1,106 @@ ++/* ++ * A simple flash mapping code for BCM963xx board flash memory ++ * It is simple because it only treats all the flash memory as ROM ++ * It is used with chips/map_rom.c ++ * ++ * Song Wang (songw@broadcom.com) ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#define VERSION "1.0" ++ ++extern PFILE_TAG kerSysImageTagGet(void); ++ ++static struct mtd_info *mymtd; ++ ++static map_word brcm_physmap_read16(struct map_info *map, unsigned long ofs) ++{ ++ map_word val; ++ ++ val.x[0] = __raw_readw(map->map_priv_1 + ofs); ++ ++ return val; ++} ++ ++static void brcm_physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) ++{ ++ memcpy_fromio(to, map->map_priv_1 + from, len); ++} ++ ++static struct map_info brcm_physmap_map = { ++ .name = "Physically mapped flash", ++ .bankwidth = 2, ++ .read = brcm_physmap_read16, ++ .copy_from = brcm_physmap_copy_from ++}; ++ ++static int __init init_brcm_physmap(void) ++{ ++ PFILE_TAG pTag = NULL; ++ u_int32_t rootfs_addr, kernel_addr; ++ FLASH_ADDR_INFO info; ++ ++ printk("bcm963xx_mtd driver v%s\n", VERSION); ++ kerSysFlashAddrInfoGet( &info ); ++ ++ /* Read the flash memory map from flash memory. */ ++ if (!(pTag = kerSysImageTagGet())) { ++ printk("Failed to read image tag from flash\n"); ++ return -EIO; ++ } ++ ++ rootfs_addr = (u_int32_t) simple_strtoul(pTag->rootfsAddress, NULL, 10); ++ kernel_addr = (u_int32_t) simple_strtoul(pTag->kernelAddress, NULL, 10); ++ ++ brcm_physmap_map.size = kernel_addr - rootfs_addr; ++ brcm_physmap_map.map_priv_1 = (unsigned long)rootfs_addr; ++ ++ if (!brcm_physmap_map.map_priv_1) { ++ printk("Wrong rootfs starting address\n"); ++ return -EIO; ++ } ++ ++ if (brcm_physmap_map.size <= 0) { ++ printk("Wrong rootfs size\n"); ++ return -EIO; ++ } ++ ++ mymtd = do_map_probe("map_rom", &brcm_physmap_map); ++ if (mymtd) { ++ mymtd->owner = THIS_MODULE; ++ add_mtd_device(mymtd); ++ ++ return 0; ++ } ++ ++ return -ENXIO; ++} ++ ++static void __exit cleanup_brcm_physmap(void) ++{ ++ if (mymtd) { ++ del_mtd_device(mymtd); ++ map_destroy(mymtd); ++ } ++ if (brcm_physmap_map.map_priv_1) { ++ brcm_physmap_map.map_priv_1 = 0; ++ } ++} ++ ++module_init(init_brcm_physmap); ++module_exit(cleanup_brcm_physmap); ++ ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Song Wang songw@broadcom.com"); ++MODULE_DESCRIPTION("Configurable MTD map driver for read-only root file system"); +diff -urN linux-2.6.16.7/drivers/mtd/maps/Kconfig linux-2.6.16.7-brcm63xx/drivers/mtd/maps/Kconfig +--- linux-2.6.16.7/drivers/mtd/maps/Kconfig 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7-brcm63xx/drivers/mtd/maps/Kconfig 2006-07-07 22:02:13.000000000 +0200 +@@ -224,6 +224,13 @@ + Flash memory access on 4G Systems MTX-1 Board. If you have one of + these boards and would like to use the flash chips on it, say 'Y'. + ++config MTD_BCM963XX ++ tristate "BCM963xx Flash device" ++ depends on MIPS && MIPS_BRCM ++ help ++ This driver seems to detect and provide a valid flash map to the system ++ of course, it needs checking and testing. ++ + config MTD_DILNETPC + tristate "CFI Flash device mapped on DIL/Net PC" + depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT +diff -urN linux-2.6.16.7/drivers/mtd/maps/Makefile linux-2.6.16.7-brcm63xx/drivers/mtd/maps/Makefile +--- linux-2.6.16.7/drivers/mtd/maps/Makefile 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7-brcm63xx/drivers/mtd/maps/Makefile 2006-07-07 22:01:29.000000000 +0200 +@@ -71,3 +71,4 @@ + obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o + obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o + obj-$(CONFIG_MTD_TQM834x) += tqm834x.o ++obj-$(CONFIG_MTD_BCM963XX) += bcm963xx.o diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/050-disable-synchronize_net.patch b/openwrt/target/linux/brcm63xx-2.6/patches/050-disable-synchronize_net.patch new file mode 100644 index 0000000000..737a70a48d --- /dev/null +++ b/openwrt/target/linux/brcm63xx-2.6/patches/050-disable-synchronize_net.patch @@ -0,0 +1,13 @@ +diff -Naurp linux-2.6.16.7-generic-patched/net/ipv4/af_inet.c linux-2.6.16.7-patched/net/ipv4/af_inet.c +--- linux-2.6.16.7-generic-patched/net/ipv4/af_inet.c 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7-patched/net/ipv4/af_inet.c 2006-07-05 15:33:47.000000000 +0200 +@@ -940,7 +940,9 @@ void inet_register_protosw(struct inet_p + out: + spin_unlock_bh(&inetsw_lock); + ++#ifndef CONFIG_MIPS_BRCM + synchronize_net(); ++#endif + + return; +