hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Several small fixes for ar8216 driver (patch by Jonas Gorski) 

* Create defines for some magic values/masks.

 * Change vlan_id to u16, to allow VIDs > 255.

 * Add a range check to set_pvid as it isn't a VID, but the index
   in the vlan table.

 * Set the max VID to 4094, since 4095 is a reserved value and
   should not be used.

 * In mangle_rx replace the provided VID with the VID of the table
   entry of the port, not the index of the table.

 * In hw_apply, remove a redundant emptyness check (was already
   checked several lines above).

 * In no vlan mode do not set the ingress mode to secure, as there
   are no vlan table entries, but to use the port's destination
   masks. Otherwise the switch won't forward anything.

 * In read_status tell that the phy is up (taken from the rtl8306
   driver).

SVN-Revision: 20083
lede-17.01
Felix Fietkau 2010-03-09 14:35:41 +00:00
parent a5441beb82
commit 513e8c583f
2 changed files with 35 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
target/linux/generic-2.6/files/drivers/net/phy/ar8216.c
View File

@ -42,7 +42,7 @@ struct ar8216_priv {
/* all fields below are cleared on reset */
bool vlan;
u8 vlan_id[AR8216_NUM_VLANS];
u16 vlan_id[AR8216_NUM_VLANS];
u8 vlan_table[AR8216_NUM_VLANS];
u8 vlan_tagged;
u16 pvid[AR8216_NUM_PORTS];
@ -133,6 +133,12 @@ static int
ar8216_set_pvid(struct switch_dev *dev, int port, int vlan)
{
struct ar8216_priv *priv = to_ar8216(dev);
/* make sure no invalid PVIDs get set */
if (vlan >= AR8216_NUM_VLANS)
return -EINVAL;
priv->pvid[port] = vlan;
return 0;
}
@ -228,7 +234,7 @@ ar8216_mangle_rx(struct sk_buff *skb, int napi)
goto recv;
/* lookup port vid from local table, the switch passes an invalid vlan id */
vlan = priv->pvid[port];
vlan = priv->vlan_id[priv->pvid[port]];
buf[14 + 2] &= 0xf0;
buf[14 + 2] |= vlan >> 8;
@ -282,7 +288,7 @@ static struct switch_attr ar8216_vlan[] = {
.description = "VLAN ID",
.set = ar8216_set_vid,
.get = ar8216_get_vid,
.max = 4095,
.max = 4094,
},
};
@ -396,9 +402,6 @@ ar8216_hw_apply(struct switch_dev *dev)
portmask[i] |= vp & ~mask;
}
if (!priv->vlan_table[j])
continue;
ar8216_vtu_op(priv,
AR8216_VTU_OP_LOAD |
(priv->vlan_id[j] << AR8216_VTU_VID_S),
@ -432,7 +435,11 @@ ar8216_hw_apply(struct switch_dev *dev)
} else {
egress = AR8216_OUT_STRIP_VLAN;
}
if (priv->vlan) {
ingress = AR8216_IN_SECURE;
} else {
ingress = AR8216_IN_PORT_ONLY;
}
ar8216_rmw(priv, AR8216_REG_PORT_CTRL(i),
AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE |
@ -478,7 +485,7 @@ ar8216_reset_switch(struct switch_dev *dev)
if (i == AR8216_PORT_CPU) {
priv->write(priv, AR8216_REG_PORT_STATUS(i),
AR8216_PORT_STATUS_LINK_UP |
AR8216_PORT_STATUS_SPEED |
AR8216_PORT_SPEED_100M |
AR8216_PORT_STATUS_TXMAC |
AR8216_PORT_STATUS_RXMAC |
AR8216_PORT_STATUS_DUPLEX);
@ -554,6 +561,10 @@ ar8216_read_status(struct phy_device *phydev)
priv->write(priv, AR8216_REG_ATU, AR8216_ATU_OP_FLUSH);
phydev->state = PHY_RUNNING;
netif_carrier_on(phydev->attached_dev);
phydev->adjust_link(phydev->attached_dev);
return 0;
}
@ -573,8 +584,8 @@ ar8216_probe(struct phy_device *pdev)
priv.phy = pdev;
val = ar8216_mii_read(&priv, AR8216_REG_CTRL);
rev = val & 0xff;
id = (val >> 8) & 0xff;
rev = val & AR8216_CTRL_REVISION;
id = (val & AR8216_CTRL_VERSION) >> AR8216_CTRL_VERSION_S;
if ((id != 1) || (rev != 1))
return -ENODEV;

16
target/linux/generic-2.6/files/drivers/net/phy/ar8216.h
View File

@ -24,6 +24,10 @@
#define AR8216_NUM_VLANS 16
#define AR8216_REG_CTRL 0x0000
#define AR8216_CTRL_REVISION BITS(0, 8)
#define AR8216_CTRL_REVISION_S 0
#define AR8216_CTRL_VERSION BITS(8, 8)
#define AR8216_CTRL_VERSION_S 8
#define AR8216_CTRL_RESET BIT(31)
#define AR8216_REG_GLOBAL_CTRL 0x0030
@ -73,8 +77,8 @@
#define AR8216_PORT_OFFSET(_i) (0x0100 * (_i + 1))
#define AR8216_REG_PORT_STATUS(_i) (AR8216_PORT_OFFSET(_i) + 0x0000)
#define AR8216_PORT_STATUS_SPEED BIT(0)
#define AR8216_PORT_STATUS_SPEED_ERR BIT(1)
#define AR8216_PORT_STATUS_SPEED BITS(0,2)
#define AR8216_PORT_STATUS_SPEED_S 0
#define AR8216_PORT_STATUS_TXMAC BIT(2)
#define AR8216_PORT_STATUS_RXMAC BIT(3)
#define AR8216_PORT_STATUS_TXFLOW BIT(4)
@ -126,6 +130,14 @@
#define AR8216_REG_PORT_RATE(_i) (AR8216_PORT_OFFSET(_i) + 0x000c)
#define AR8216_REG_PORT_PRIO(_i) (AR8216_PORT_OFFSET(_i) + 0x0010)
/* port speed */
enum {
AR8216_PORT_SPEED_10M = 0,
AR8216_PORT_SPEED_100M = 1,
AR8216_PORT_SPEED_1000M = 2,
AR8216_PORT_SPEED_ERR = 3,
};
/* ingress 802.1q mode */
enum {
AR8216_IN_PORT_ONLY = 0,