brcm47xx: prepare brcm47xx patches for sending to mainline.

SVN-Revision: 22296

target/linux/brcm47xx/files-2.6.34/drivers/mtd/maps/bcm47xx-flash.c

@@ -0,0 +1,474 @@
+/*
+ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
+ *
+ *  original functions for finding root filesystem from Mike Baker 
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ * 
+ *  Copyright 2001-2003, Broadcom Corporation
+ *  All Rights Reserved.
+ * 
+ *  THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ *  KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ *  SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ *  FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ *  Flash mapping for BCM947XX boards
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#ifdef CONFIG_MTD_PARTITIONS
+#include <linux/mtd/partitions.h>
+#endif
+#include <linux/crc32.h>
+#ifdef CONFIG_SSB
+#include <linux/ssb/ssb.h>
+#endif
+#include <asm/io.h>
+
+
+#define TRX_MAGIC	0x30524448	/* "HDR0" */
+#define TRX_VERSION	1
+#define TRX_MAX_LEN	0x3A0000
+#define TRX_NO_HEADER	1		/* Do not write TRX header */	
+#define TRX_GZ_FILES	0x2     /* Contains up to TRX_MAX_OFFSET individual gzip files */
+#define TRX_MAX_OFFSET	3
+
+struct trx_header {
+	u32 magic;		/* "HDR0" */
+	u32 len;		/* Length of file including header */
+	u32 crc32;		/* 32-bit CRC from flag_version to end of file */
+	u32 flag_version;	/* 0:15 flags, 16:31 version */
+	u32 offsets[TRX_MAX_OFFSET];	/* Offsets of partitions from start of header */
+};
+
+#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y))
+#define NVRAM_SPACE 0x8000
+#define WINDOW_ADDR 0x1fc00000
+#define WINDOW_SIZE 0x400000
+#define BUSWIDTH 2
+
+#ifdef CONFIG_SSB
+extern struct ssb_bus ssb_bcm47xx;
+#endif
+static struct mtd_info *bcm47xx_mtd;
+
+static void bcm47xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	if (len==1) {
+		memcpy_fromio(to, map->virt + from, len);
+	} else {
+		int i;
+		u16 *dest = (u16 *) to;
+		u16 *src  = (u16 *) (map->virt + from);
+		for (i = 0; i < (len / 2); i++) {
+			dest[i] = src[i];
+		}
+		if (len & 1)
+			*((u8 *)dest+len-1) = src[i] & 0xff;
+	}
+}
+
+static struct map_info bcm47xx_map = {
+	name: "Physically mapped flash",
+	size: WINDOW_SIZE,
+	bankwidth: BUSWIDTH,
+	phys: WINDOW_ADDR,
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+
+static struct mtd_partition bcm47xx_parts[] = {
+	{ name: "cfe",	offset: 0, size: 0, mask_flags: MTD_WRITEABLE, },
+	{ name: "linux", offset: 0, size: 0, },
+	{ name: "rootfs", offset: 0, size: 0, },
+	{ name: "nvram", offset: 0, size: 0, },
+	{ name: NULL, },
+};
+
+static int __init
+find_cfe_size(struct mtd_info *mtd, size_t size)
+{
+	struct trx_header *trx;
+	unsigned char buf[512];
+	int off;
+	size_t len;
+	int blocksize;
+
+	trx = (struct trx_header *) buf;
+
+	blocksize = mtd->erasesize;
+	if (blocksize < 0x10000)
+		blocksize = 0x10000;
+
+	for (off = (128*1024); off < size; off += blocksize) {
+		memset(buf, 0xe5, sizeof(buf));
+
+		/*
+		 * Read into buffer 
+		 */
+		if (mtd->read(mtd, off, sizeof(buf), &len, buf) ||
+		    len != sizeof(buf))
+			continue;
+
+		/* found a TRX header */
+		if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
+			goto found;
+		}
+	}
+
+	printk(KERN_NOTICE
+	       "%s: Couldn't find bootloader size\n",
+	       mtd->name);
+	return -1;
+
+ found:
+	printk(KERN_NOTICE "bootloader size: %d\n", off);
+	return off;
+
+}
+
+/*
+ * Copied from mtdblock.c
+ *
+ * Cache stuff...
+ * 
+ * Since typical flash erasable sectors are much larger than what Linux's
+ * buffer cache can handle, we must implement read-modify-write on flash
+ * sectors for each block write requests.  To avoid over-erasing flash sectors
+ * and to speed things up, we locally cache a whole flash sector while it is
+ * being written to until a different sector is required.
+ */
+
+static void erase_callback(struct erase_info *done)
+{
+	wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
+	wake_up(wait_q);
+}
+
+static int erase_write (struct mtd_info *mtd, unsigned long pos, 
+			int len, const char *buf)
+{
+	struct erase_info erase;
+	DECLARE_WAITQUEUE(wait, current);
+	wait_queue_head_t wait_q;
+	size_t retlen;
+	int ret;
+
+	/*
+	 * First, let's erase the flash block.
+	 */
+
+	init_waitqueue_head(&wait_q);
+	erase.mtd = mtd;
+	erase.callback = erase_callback;
+	erase.addr = pos;
+	erase.len = len;
+	erase.priv = (u_long)&wait_q;
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	add_wait_queue(&wait_q, &wait);
+
+	ret = mtd->erase(mtd, &erase);
+	if (ret) {
+		set_current_state(TASK_RUNNING);
+		remove_wait_queue(&wait_q, &wait);
+		printk (KERN_WARNING "erase of region [0x%lx, 0x%x] "
+				     "on \"%s\" failed\n",
+			pos, len, mtd->name);
+		return ret;
+	}
+
+	schedule();  /* Wait for erase to finish. */
+	remove_wait_queue(&wait_q, &wait);
+
+	/*
+	 * Next, writhe data to flash.
+	 */
+
+	ret = mtd->write (mtd, pos, len, &retlen, buf);
+	if (ret)
+		return ret;
+	if (retlen != len)
+		return -EIO;
+	return 0;
+}
+
+
+static int __init
+find_dual_image_off (struct mtd_info *mtd, size_t size)
+{
+	struct trx_header trx;
+	int off, blocksize;
+	size_t len;
+
+	blocksize = mtd->erasesize;
+	if (blocksize < 0x10000)
+		blocksize = 0x10000;
+
+	for (off = (128*1024); off < size; off += blocksize) {
+		memset(&trx, 0xe5, sizeof(trx));
+		/*
+		* Read into buffer 
+		*/
+		if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
+		    len != sizeof(trx))
+			continue;
+		/* found last TRX header */
+		if (le32_to_cpu(trx.magic) == TRX_MAGIC){ 
+			if (le32_to_cpu(trx.flag_version >> 16)==2){
+				printk("dual image TRX header found\n");
+				return size/2;
+			} else {
+				return 0;
+			}
+		}
+	}
+	return 0;
+}
+
+
+static int __init
+find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part)
+{
+	struct trx_header trx, *trx2;
+	unsigned char buf[512], *block;
+	int off, blocksize;
+	u32 i, crc = ~0;
+	size_t len;
+
+	blocksize = mtd->erasesize;
+	if (blocksize < 0x10000)
+		blocksize = 0x10000;
+
+	for (off = (128*1024); off < size; off += blocksize) {
+		memset(&trx, 0xe5, sizeof(trx));
+
+		/*
+		 * Read into buffer 
+		 */
+		if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
+		    len != sizeof(trx))
+			continue;
+
+		/* found a TRX header */
+		if (le32_to_cpu(trx.magic) == TRX_MAGIC) {
+			part->offset = le32_to_cpu(trx.offsets[2]) ? : 
+				le32_to_cpu(trx.offsets[1]);
+			part->size = le32_to_cpu(trx.len); 
+
+			part->size -= part->offset;
+			part->offset += off;
+
+			goto found;
+		}
+	}
+
+	printk(KERN_NOTICE
+	       "%s: Couldn't find root filesystem\n",
+	       mtd->name);
+	return -1;
+
+ found:
+	if (part->size == 0)
+		return 0;
+	
+	if (mtd->read(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf))
+		return 0;
+
+	/* Move the fs outside of the trx */
+	part->size = 0;
+
+	if (trx.len != part->offset + part->size - off) {
+		/* Update the trx offsets and length */
+		trx.len = part->offset + part->size - off;
+	
+		/* Update the trx crc32 */
+		for (i = (u32) &(((struct trx_header *)NULL)->flag_version); i <= trx.len; i += sizeof(buf)) {
+			if (mtd->read(mtd, off + i, sizeof(buf), &len, buf) || len != sizeof(buf))
+				return 0;
+			crc = crc32_le(crc, buf, min(sizeof(buf), trx.len - i));
+		}
+		trx.crc32 = crc;
+
+		/* read first eraseblock from the trx */
+		block = kmalloc(mtd->erasesize, GFP_KERNEL);
+		trx2 = (struct trx_header *) block;
+		if (mtd->read(mtd, off, mtd->erasesize, &len, block) || len != mtd->erasesize) {
+			printk("Error accessing the first trx eraseblock\n");
+			return 0;
+		}
+		
+		printk("Updating TRX offsets and length:\n");
+		printk("old trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx2->offsets[0], trx2->offsets[1], trx2->offsets[2], trx2->len, trx2->crc32);
+		printk("new trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n",   trx.offsets[0],   trx.offsets[1],   trx.offsets[2],   trx.len, trx.crc32);
+
+		/* Write updated trx header to the flash */
+		memcpy(block, &trx, sizeof(trx));
+		if (mtd->unlock)
+			mtd->unlock(mtd, off, mtd->erasesize);
+		erase_write(mtd, off, mtd->erasesize, block);
+		if (mtd->sync)
+			mtd->sync(mtd);
+		kfree(block);
+		printk("Done\n");
+	}
+	
+	return part->size;
+}
+
+struct mtd_partition * __init
+init_mtd_partitions(struct mtd_info *mtd, size_t size)
+{
+	int cfe_size;
+	int dual_image_offset = 0;
+
+	if ((cfe_size = find_cfe_size(mtd,size)) < 0)
+		return NULL;
+
+	/* boot loader */
+	bcm47xx_parts[0].offset = 0;
+	bcm47xx_parts[0].size   = cfe_size;
+
+	/* nvram */
+	if (cfe_size != 384 * 1024) {
+		bcm47xx_parts[3].offset = size - ROUNDUP(NVRAM_SPACE, mtd->erasesize);
+		bcm47xx_parts[3].size   = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
+	} else {
+		/* nvram (old 128kb config partition on netgear wgt634u) */
+		bcm47xx_parts[3].offset = bcm47xx_parts[0].size;
+		bcm47xx_parts[3].size   = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
+	}
+
+	/* dual image offset*/
+	printk("Looking for dual image\n");
+	dual_image_offset=find_dual_image_off(mtd,size);
+	/* linux (kernel and rootfs) */
+	if (cfe_size != 384 * 1024) {
+		bcm47xx_parts[1].offset = bcm47xx_parts[0].size;
+		bcm47xx_parts[1].size   = bcm47xx_parts[3].offset - dual_image_offset -
+			bcm47xx_parts[1].offset;
+	} else {
+		/* do not count the elf loader, which is on one block */
+		bcm47xx_parts[1].offset = bcm47xx_parts[0].size + 
+			bcm47xx_parts[3].size + mtd->erasesize;
+		bcm47xx_parts[1].size   = size - 
+			bcm47xx_parts[0].size - 
+			(2*bcm47xx_parts[3].size) - 
+			mtd->erasesize;
+	}
+
+	/* find and size rootfs */
+	find_root(mtd,size,&bcm47xx_parts[2]);
+	bcm47xx_parts[2].size = size - dual_image_offset - bcm47xx_parts[2].offset - bcm47xx_parts[3].size;
+
+	return bcm47xx_parts;
+}
+#endif
+
+int __init init_bcm47xx_map(void)
+{
+#ifdef CONFIG_SSB
+	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+#endif
+	size_t size;
+	int ret = 0;
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *parts;
+	int i;
+#endif
+
+#ifdef CONFIG_SSB
+	u32 window = mcore->flash_window;
+	u32 window_size = mcore->flash_window_size;
+
+	printk("flash init: 0x%08x 0x%08x\n", window, window_size);
+	bcm47xx_map.phys = window;
+	bcm47xx_map.size = window_size;
+	bcm47xx_map.bankwidth = mcore->flash_buswidth;
+	bcm47xx_map.virt = ioremap_nocache(window, window_size);
+#else
+	printk("flash init: 0x%08x 0x%08x\n", WINDOW_ADDR, WINDOW_SIZE);
+	bcm47xx_map.virt = ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE);
+#endif
+
+	if (!bcm47xx_map.virt) {
+		printk("Failed to ioremap\n");
+		return -EIO;
+	}
+
+	simple_map_init(&bcm47xx_map);
+	
+	if (!(bcm47xx_mtd = do_map_probe("cfi_probe", &bcm47xx_map))) {
+		printk("Failed to do_map_probe\n");
+		iounmap((void *)bcm47xx_map.virt);
+		return -ENXIO;
+	}
+
+	/* override copy_from routine */
+ 	bcm47xx_map.copy_from = bcm47xx_map_copy_from;
+
+	bcm47xx_mtd->owner = THIS_MODULE;
+
+	size = bcm47xx_mtd->size;
+
+	printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, WINDOW_ADDR);
+
+#ifdef CONFIG_MTD_PARTITIONS
+	parts = init_mtd_partitions(bcm47xx_mtd, size);
+	for (i = 0; parts[i].name; i++);
+	ret = add_mtd_partitions(bcm47xx_mtd, parts, i);
+	if (ret) {
+		printk(KERN_ERR "Flash: add_mtd_partitions failed\n");
+		goto fail;
+	}
+#endif
+	return 0;
+
+ fail:
+	if (bcm47xx_mtd)
+		map_destroy(bcm47xx_mtd);
+	if (bcm47xx_map.virt)
+		iounmap((void *)bcm47xx_map.virt);
+	bcm47xx_map.virt = 0;
+	return ret;
+}
+
+void __exit cleanup_bcm47xx_map(void)
+{
+#ifdef CONFIG_MTD_PARTITIONS
+	del_mtd_partitions(bcm47xx_mtd);
+#endif
+	map_destroy(bcm47xx_mtd);
+	iounmap((void *)bcm47xx_map.virt);
+}
+
+module_init(init_bcm47xx_map);
+module_exit(cleanup_bcm47xx_map);

target/linux/brcm47xx/files-2.6.35/drivers/mtd/maps/bcm47xx-flash.c

@@ -0,0 +1,474 @@
+/*
+ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
+ *
+ *  original functions for finding root filesystem from Mike Baker 
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ * 
+ *  Copyright 2001-2003, Broadcom Corporation
+ *  All Rights Reserved.
+ * 
+ *  THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ *  KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ *  SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ *  FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ *  Flash mapping for BCM947XX boards
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#ifdef CONFIG_MTD_PARTITIONS
+#include <linux/mtd/partitions.h>
+#endif
+#include <linux/crc32.h>
+#ifdef CONFIG_SSB
+#include <linux/ssb/ssb.h>
+#endif
+#include <asm/io.h>
+
+
+#define TRX_MAGIC	0x30524448	/* "HDR0" */
+#define TRX_VERSION	1
+#define TRX_MAX_LEN	0x3A0000
+#define TRX_NO_HEADER	1		/* Do not write TRX header */	
+#define TRX_GZ_FILES	0x2     /* Contains up to TRX_MAX_OFFSET individual gzip files */
+#define TRX_MAX_OFFSET	3
+
+struct trx_header {
+	u32 magic;		/* "HDR0" */
+	u32 len;		/* Length of file including header */
+	u32 crc32;		/* 32-bit CRC from flag_version to end of file */
+	u32 flag_version;	/* 0:15 flags, 16:31 version */
+	u32 offsets[TRX_MAX_OFFSET];	/* Offsets of partitions from start of header */
+};
+
+#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y))
+#define NVRAM_SPACE 0x8000
+#define WINDOW_ADDR 0x1fc00000
+#define WINDOW_SIZE 0x400000
+#define BUSWIDTH 2
+
+#ifdef CONFIG_SSB
+extern struct ssb_bus ssb_bcm47xx;
+#endif
+static struct mtd_info *bcm47xx_mtd;
+
+static void bcm47xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	if (len==1) {
+		memcpy_fromio(to, map->virt + from, len);
+	} else {
+		int i;
+		u16 *dest = (u16 *) to;
+		u16 *src  = (u16 *) (map->virt + from);
+		for (i = 0; i < (len / 2); i++) {
+			dest[i] = src[i];
+		}
+		if (len & 1)
+			*((u8 *)dest+len-1) = src[i] & 0xff;
+	}
+}
+
+static struct map_info bcm47xx_map = {
+	name: "Physically mapped flash",
+	size: WINDOW_SIZE,
+	bankwidth: BUSWIDTH,
+	phys: WINDOW_ADDR,
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+
+static struct mtd_partition bcm47xx_parts[] = {
+	{ name: "cfe",	offset: 0, size: 0, mask_flags: MTD_WRITEABLE, },
+	{ name: "linux", offset: 0, size: 0, },
+	{ name: "rootfs", offset: 0, size: 0, },
+	{ name: "nvram", offset: 0, size: 0, },
+	{ name: NULL, },
+};
+
+static int __init
+find_cfe_size(struct mtd_info *mtd, size_t size)
+{
+	struct trx_header *trx;
+	unsigned char buf[512];
+	int off;
+	size_t len;
+	int blocksize;
+
+	trx = (struct trx_header *) buf;
+
+	blocksize = mtd->erasesize;
+	if (blocksize < 0x10000)
+		blocksize = 0x10000;
+
+	for (off = (128*1024); off < size; off += blocksize) {
+		memset(buf, 0xe5, sizeof(buf));
+
+		/*
+		 * Read into buffer 
+		 */
+		if (mtd->read(mtd, off, sizeof(buf), &len, buf) ||
+		    len != sizeof(buf))
+			continue;
+
+		/* found a TRX header */
+		if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
+			goto found;
+		}
+	}
+
+	printk(KERN_NOTICE
+	       "%s: Couldn't find bootloader size\n",
+	       mtd->name);
+	return -1;
+
+ found:
+	printk(KERN_NOTICE "bootloader size: %d\n", off);
+	return off;
+
+}
+
+/*
+ * Copied from mtdblock.c
+ *
+ * Cache stuff...
+ * 
+ * Since typical flash erasable sectors are much larger than what Linux's
+ * buffer cache can handle, we must implement read-modify-write on flash
+ * sectors for each block write requests.  To avoid over-erasing flash sectors
+ * and to speed things up, we locally cache a whole flash sector while it is
+ * being written to until a different sector is required.
+ */
+
+static void erase_callback(struct erase_info *done)
+{
+	wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
+	wake_up(wait_q);
+}
+
+static int erase_write (struct mtd_info *mtd, unsigned long pos, 
+			int len, const char *buf)
+{
+	struct erase_info erase;
+	DECLARE_WAITQUEUE(wait, current);
+	wait_queue_head_t wait_q;
+	size_t retlen;
+	int ret;
+
+	/*
+	 * First, let's erase the flash block.
+	 */
+
+	init_waitqueue_head(&wait_q);
+	erase.mtd = mtd;
+	erase.callback = erase_callback;
+	erase.addr = pos;
+	erase.len = len;
+	erase.priv = (u_long)&wait_q;
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	add_wait_queue(&wait_q, &wait);
+
+	ret = mtd->erase(mtd, &erase);
+	if (ret) {
+		set_current_state(TASK_RUNNING);
+		remove_wait_queue(&wait_q, &wait);
+		printk (KERN_WARNING "erase of region [0x%lx, 0x%x] "
+				     "on \"%s\" failed\n",
+			pos, len, mtd->name);
+		return ret;
+	}
+
+	schedule();  /* Wait for erase to finish. */
+	remove_wait_queue(&wait_q, &wait);
+
+	/*
+	 * Next, writhe data to flash.
+	 */
+
+	ret = mtd->write (mtd, pos, len, &retlen, buf);
+	if (ret)
+		return ret;
+	if (retlen != len)
+		return -EIO;
+	return 0;
+}
+
+
+static int __init
+find_dual_image_off (struct mtd_info *mtd, size_t size)
+{
+	struct trx_header trx;
+	int off, blocksize;
+	size_t len;
+
+	blocksize = mtd->erasesize;
+	if (blocksize < 0x10000)
+		blocksize = 0x10000;
+
+	for (off = (128*1024); off < size; off += blocksize) {
+		memset(&trx, 0xe5, sizeof(trx));
+		/*
+		* Read into buffer 
+		*/
+		if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
+		    len != sizeof(trx))
+			continue;
+		/* found last TRX header */
+		if (le32_to_cpu(trx.magic) == TRX_MAGIC){ 
+			if (le32_to_cpu(trx.flag_version >> 16)==2){
+				printk("dual image TRX header found\n");
+				return size/2;
+			} else {
+				return 0;
+			}
+		}
+	}
+	return 0;
+}
+
+
+static int __init
+find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part)
+{
+	struct trx_header trx, *trx2;
+	unsigned char buf[512], *block;
+	int off, blocksize;
+	u32 i, crc = ~0;
+	size_t len;
+
+	blocksize = mtd->erasesize;
+	if (blocksize < 0x10000)
+		blocksize = 0x10000;
+
+	for (off = (128*1024); off < size; off += blocksize) {
+		memset(&trx, 0xe5, sizeof(trx));
+
+		/*
+		 * Read into buffer 
+		 */
+		if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
+		    len != sizeof(trx))
+			continue;
+
+		/* found a TRX header */
+		if (le32_to_cpu(trx.magic) == TRX_MAGIC) {
+			part->offset = le32_to_cpu(trx.offsets[2]) ? : 
+				le32_to_cpu(trx.offsets[1]);
+			part->size = le32_to_cpu(trx.len); 
+
+			part->size -= part->offset;
+			part->offset += off;
+
+			goto found;
+		}
+	}
+
+	printk(KERN_NOTICE
+	       "%s: Couldn't find root filesystem\n",
+	       mtd->name);
+	return -1;
+
+ found:
+	if (part->size == 0)
+		return 0;
+	
+	if (mtd->read(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf))
+		return 0;
+
+	/* Move the fs outside of the trx */
+	part->size = 0;
+
+	if (trx.len != part->offset + part->size - off) {
+		/* Update the trx offsets and length */
+		trx.len = part->offset + part->size - off;
+	
+		/* Update the trx crc32 */
+		for (i = (u32) &(((struct trx_header *)NULL)->flag_version); i <= trx.len; i += sizeof(buf)) {
+			if (mtd->read(mtd, off + i, sizeof(buf), &len, buf) || len != sizeof(buf))
+				return 0;
+			crc = crc32_le(crc, buf, min(sizeof(buf), trx.len - i));
+		}
+		trx.crc32 = crc;
+
+		/* read first eraseblock from the trx */
+		block = kmalloc(mtd->erasesize, GFP_KERNEL);
+		trx2 = (struct trx_header *) block;
+		if (mtd->read(mtd, off, mtd->erasesize, &len, block) || len != mtd->erasesize) {
+			printk("Error accessing the first trx eraseblock\n");
+			return 0;
+		}
+		
+		printk("Updating TRX offsets and length:\n");
+		printk("old trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx2->offsets[0], trx2->offsets[1], trx2->offsets[2], trx2->len, trx2->crc32);
+		printk("new trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n",   trx.offsets[0],   trx.offsets[1],   trx.offsets[2],   trx.len, trx.crc32);
+
+		/* Write updated trx header to the flash */
+		memcpy(block, &trx, sizeof(trx));
+		if (mtd->unlock)
+			mtd->unlock(mtd, off, mtd->erasesize);
+		erase_write(mtd, off, mtd->erasesize, block);
+		if (mtd->sync)
+			mtd->sync(mtd);
+		kfree(block);
+		printk("Done\n");
+	}
+	
+	return part->size;
+}
+
+struct mtd_partition * __init
+init_mtd_partitions(struct mtd_info *mtd, size_t size)
+{
+	int cfe_size;
+	int dual_image_offset = 0;
+
+	if ((cfe_size = find_cfe_size(mtd,size)) < 0)
+		return NULL;
+
+	/* boot loader */
+	bcm47xx_parts[0].offset = 0;
+	bcm47xx_parts[0].size   = cfe_size;
+
+	/* nvram */
+	if (cfe_size != 384 * 1024) {
+		bcm47xx_parts[3].offset = size - ROUNDUP(NVRAM_SPACE, mtd->erasesize);
+		bcm47xx_parts[3].size   = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
+	} else {
+		/* nvram (old 128kb config partition on netgear wgt634u) */
+		bcm47xx_parts[3].offset = bcm47xx_parts[0].size;
+		bcm47xx_parts[3].size   = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
+	}
+
+	/* dual image offset*/
+	printk("Looking for dual image\n");
+	dual_image_offset=find_dual_image_off(mtd,size);
+	/* linux (kernel and rootfs) */
+	if (cfe_size != 384 * 1024) {
+		bcm47xx_parts[1].offset = bcm47xx_parts[0].size;
+		bcm47xx_parts[1].size   = bcm47xx_parts[3].offset - dual_image_offset -
+			bcm47xx_parts[1].offset;
+	} else {
+		/* do not count the elf loader, which is on one block */
+		bcm47xx_parts[1].offset = bcm47xx_parts[0].size + 
+			bcm47xx_parts[3].size + mtd->erasesize;
+		bcm47xx_parts[1].size   = size - 
+			bcm47xx_parts[0].size - 
+			(2*bcm47xx_parts[3].size) - 
+			mtd->erasesize;
+	}
+
+	/* find and size rootfs */
+	find_root(mtd,size,&bcm47xx_parts[2]);
+	bcm47xx_parts[2].size = size - dual_image_offset - bcm47xx_parts[2].offset - bcm47xx_parts[3].size;
+
+	return bcm47xx_parts;
+}
+#endif
+
+int __init init_bcm47xx_map(void)
+{
+#ifdef CONFIG_SSB
+	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+#endif
+	size_t size;
+	int ret = 0;
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *parts;
+	int i;
+#endif
+
+#ifdef CONFIG_SSB
+	u32 window = mcore->flash_window;
+	u32 window_size = mcore->flash_window_size;
+
+	printk("flash init: 0x%08x 0x%08x\n", window, window_size);
+	bcm47xx_map.phys = window;
+	bcm47xx_map.size = window_size;
+	bcm47xx_map.bankwidth = mcore->flash_buswidth;
+	bcm47xx_map.virt = ioremap_nocache(window, window_size);
+#else
+	printk("flash init: 0x%08x 0x%08x\n", WINDOW_ADDR, WINDOW_SIZE);
+	bcm47xx_map.virt = ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE);
+#endif
+
+	if (!bcm47xx_map.virt) {
+		printk("Failed to ioremap\n");
+		return -EIO;
+	}
+
+	simple_map_init(&bcm47xx_map);
+	
+	if (!(bcm47xx_mtd = do_map_probe("cfi_probe", &bcm47xx_map))) {
+		printk("Failed to do_map_probe\n");
+		iounmap((void *)bcm47xx_map.virt);
+		return -ENXIO;
+	}
+
+	/* override copy_from routine */
+ 	bcm47xx_map.copy_from = bcm47xx_map_copy_from;
+
+	bcm47xx_mtd->owner = THIS_MODULE;
+
+	size = bcm47xx_mtd->size;
+
+	printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, WINDOW_ADDR);
+
+#ifdef CONFIG_MTD_PARTITIONS
+	parts = init_mtd_partitions(bcm47xx_mtd, size);
+	for (i = 0; parts[i].name; i++);
+	ret = add_mtd_partitions(bcm47xx_mtd, parts, i);
+	if (ret) {
+		printk(KERN_ERR "Flash: add_mtd_partitions failed\n");
+		goto fail;
+	}
+#endif
+	return 0;
+
+ fail:
+	if (bcm47xx_mtd)
+		map_destroy(bcm47xx_mtd);
+	if (bcm47xx_map.virt)
+		iounmap((void *)bcm47xx_map.virt);
+	bcm47xx_map.virt = 0;
+	return ret;
+}
+
+void __exit cleanup_bcm47xx_map(void)
+{
+#ifdef CONFIG_MTD_PARTITIONS
+	del_mtd_partitions(bcm47xx_mtd);
+#endif
+	map_destroy(bcm47xx_mtd);
+	iounmap((void *)bcm47xx_map.virt);
+}
+
+module_init(init_bcm47xx_map);
+module_exit(cleanup_bcm47xx_map);

target/linux/brcm47xx/patches-2.6.34/001-backport.patch

@@ -0,0 +1,254 @@
+commit 121915c4ee0812a14bc8d752bc210d0238d755c1
+Author: Waldemar Brodkorb <mips@waldemar-brodkorb.de>
+Date:   Tue Jun 8 19:06:01 2010 +0200
+
+    MIPS: BCM47xx: Add NVRAM support devices
+    
+    When trying to netboot a Linksys WRT54GS WLAN router, the bootup fails,
+    because of following error message:
+    
+    ...
+    [    0.424000] b44: b44.c:v2.0
+    [    0.424000] b44: Invalid MAC address found in EEPROM
+    [    0.432000] b44 ssb0:1: Problem fetching invariants of chip,aborting
+    [    0.436000] b44: probe of ssb0:1 failed with error -22
+    ...
+    
+    The router uses a CFE bootloader, but most of the needed environment
+    variables for network card initialization, are not available from CFE
+    via printenv and even though not via cfe_getenv().
+    The required environment variables are saved in a special partition
+    in flash memory. The attached patch implement nvram_getenv and enables
+    bootup via NFS root on my router.
+    
+    Most of the patch is extracted from the OpenWrt subversion repository and
+    stripped down and cleaned up to just fix this issue.
+    
+    [Ralf: sorted out header file inclusions.  Lots of unneded headers and such
+    that should have been included.]
+    
+    Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
+    Reviewed-by: Phil Sutter <phil@nwl.cc>
+    To: linux-mips@linux-mips.org
+    Cc: Hauke Mehrtens <hauke@hauke-m.de>
+    Patchwork: http://patchwork.linux-mips.org/patch/1359/
+    Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
+
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -3,4 +3,4 @@
+ # under Linux.
+ #
+ 
+-obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o
++obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
+--- /dev/null
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -0,0 +1,94 @@
++/*
++ * BCM947xx nvram variable access
++ *
++ * Copyright (C) 2005 Broadcom Corporation
++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/module.h>
++#include <linux/ssb/ssb.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <asm/addrspace.h>
++#include <asm/mach-bcm47xx/nvram.h>
++#include <asm/mach-bcm47xx/bcm47xx.h>
++
++static char nvram_buf[NVRAM_SPACE];
++
++/* Probe for NVRAM header */
++static void __init early_nvram_init(void)
++{
++	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
++	struct nvram_header *header;
++	int i;
++	u32 base, lim, off;
++	u32 *src, *dst;
++
++	base = mcore->flash_window;
++	lim = mcore->flash_window_size;
++
++	off = FLASH_MIN;
++	while (off <= lim) {
++		/* Windowed flash access */
++		header = (struct nvram_header *)
++			KSEG1ADDR(base + off - NVRAM_SPACE);
++		if (header->magic == NVRAM_HEADER)
++			goto found;
++		off <<= 1;
++	}
++
++	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
++	header = (struct nvram_header *) KSEG1ADDR(base + 4096);
++	if (header->magic == NVRAM_HEADER)
++		goto found;
++
++	header = (struct nvram_header *) KSEG1ADDR(base + 1024);
++	if (header->magic == NVRAM_HEADER)
++		goto found;
++
++	return;
++
++found:
++	src = (u32 *) header;
++	dst = (u32 *) nvram_buf;
++	for (i = 0; i < sizeof(struct nvram_header); i += 4)
++		*dst++ = *src++;
++	for (; i < header->len && i < NVRAM_SPACE; i += 4)
++		*dst++ = le32_to_cpu(*src++);
++}
++
++int nvram_getenv(char *name, char *val, size_t val_len)
++{
++	char *var, *value, *end, *eq;
++
++	if (!name)
++		return 1;
++
++	if (!nvram_buf[0])
++		early_nvram_init();
++
++	/* Look for name=value and return value */
++	var = &nvram_buf[sizeof(struct nvram_header)];
++	end = nvram_buf + sizeof(nvram_buf) - 2;
++	end[0] = end[1] = '\0';
++	for (; *var; var = value + strlen(value) + 1) {
++		eq = strchr(var, '=');
++		if (!eq)
++			break;
++		value = eq + 1;
++		if ((eq - var) == strlen(name) &&
++			strncmp(var, name, (eq - var)) == 0) {
++			snprintf(val, val_len, "%s", value);
++			return 0;
++		}
++	}
++	return 1;
++}
++EXPORT_SYMBOL(nvram_getenv);
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -1,8 +1,8 @@
+ /*
+  *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
+- *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
+  *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+  *  Copyright (C) 2006 Michael Buesch <mb@bu3sch.de>
++ *  Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
+  *
+  *  This program is free software; you can redistribute  it and/or modify it
+  *  under  the terms of  the GNU General  Public License as published by the
+@@ -33,6 +33,7 @@
+ #include <asm/time.h>
+ #include <bcm47xx.h>
+ #include <asm/fw/cfe/cfe_api.h>
++#include <asm/mach-bcm47xx/nvram.h>
+ 
+ struct ssb_bus ssb_bcm47xx;
+ EXPORT_SYMBOL(ssb_bcm47xx);
+@@ -81,28 +82,42 @@ static int bcm47xx_get_invariants(struct
+ 	/* Fill boardinfo structure */
+ 	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
+ 
+-	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0)
++	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
++	    nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+ 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
+-	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
++	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
++	    nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
+ 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
+-	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
++	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
++	    nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
+ 		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
+ 
+ 	/* Fill sprom structure */
+ 	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
+ 	iv->sprom.revision = 3;
+ 
+-	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
++	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
++	    nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+ 		str2eaddr(buf, iv->sprom.et0mac);
+-	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
++
++	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
++	    nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+ 		str2eaddr(buf, iv->sprom.et1mac);
+-	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
+-		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10);
+-	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
+-		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10);
+-	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
++
++	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
++	    nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
++		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
++
++	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
++	    nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
++		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
++
++	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
++	    nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
+ 		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
+-	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
++
++	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
++	    nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
+ 		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
+ 
+ 	return 0;
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
+@@ -0,0 +1,36 @@
++/*
++ *  Copyright (C) 2005, Broadcom Corporation
++ *  Copyright (C) 2006, Felix Fietkau <nbd@openwrt.org>
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ */
++
++#ifndef __NVRAM_H
++#define __NVRAM_H
++
++#include <linux/types.h>
++
++struct nvram_header {
++	u32 magic;
++	u32 len;
++	u32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
++	u32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
++	u32 config_ncdl;	/* ncdl values for memc */
++};
++
++#define NVRAM_HEADER		0x48534C46	/* 'FLSH' */
++#define NVRAM_VERSION		1
++#define NVRAM_HEADER_SIZE	20
++#define NVRAM_SPACE		0x8000
++
++#define FLASH_MIN		0x00020000	/* Minimum flash size */
++
++#define NVRAM_MAX_VALUE_LEN 255
++#define NVRAM_MAX_PARAM_LEN 64
++
++extern int nvram_getenv(char *name, char *val, size_t val_len);
++
++#endif

target/linux/brcm47xx/patches-2.6.34/011-MIPS-BCM47xx-Really-fix-128MB-RAM-problem.patch

@@ -1,3 +1,24 @@
+From b6d850fe4035d6bee7199119358e06f802aa19ed Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 12:49:41 +0200
+Subject: [PATCH 1/5] MIPS: BCM47xx: Really fix 128MB RAM problem
+
+The previews patch 84a6fcb368a080620d12fc4d79e07902dbee7335 was wrong,
+I got wrong success reports.
+
+The bcm47xx architecture maps the ram into a 128MB address space. It
+will be paced there as often as goes into the 128MB. The detection
+tries to find the position where the same memory is found. When reading
+over 128MB the processor will throw an exception. If 128MB ram is
+installed, it will not find the same memory because it tries to read
+over the 128MB boarder. Now it just assumes 128MB installed ram if it
+can not find that the ram is repeating.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/prom.c |   22 ++++++++++++++--------
+ 1 files changed, 14 insertions(+), 8 deletions(-)
+
 --- a/arch/mips/bcm47xx/prom.c
 +++ b/arch/mips/bcm47xx/prom.c
 @@ -126,6 +126,7 @@ static __init void prom_init_cmdline(voi

target/linux/brcm47xx/patches-2.6.34/012-MIPS-BCM47xx-Fill-more-values-into-ssb-sprom.patch

@@ -0,0 +1,158 @@
+From d6c049e08568aac29fff854ea0385e63c7150e09 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 13:34:32 +0200
+Subject: [PATCH 2/5] MIPS: BCM47xx: Fill more values into ssb sprom
+
+Most of the values are stored in the nvram and not in the CFE. At first
+the nvram should be read and if there is no value it should look into
+the CFE. Now more values are read out because the b43 and b43legacy
+drivers needs them.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/setup.c |  122 +++++++++++++++++++++++++++++++++------------
+ 1 files changed, 89 insertions(+), 33 deletions(-)
+
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -74,6 +74,86 @@ static void str2eaddr(char *str, char *d
+ 	}
+ }
+ 
++static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
++{
++	char buf[100];
++
++	memset(sprom, 0, sizeof(struct ssb_sprom));
++
++	sprom->revision = 3;
++	if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
++		str2eaddr(buf, sprom->il0mac);
++	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
++		str2eaddr(buf, sprom->et0mac);
++	if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
++		str2eaddr(buf, sprom->et1mac);
++	if (nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
++		sprom->et0phyaddr = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
++		sprom->et1phyaddr = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
++		sprom->et0mdcport = !!simple_strtoul(buf, NULL, 10);
++	if (nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
++		sprom->et1mdcport = !!simple_strtoul(buf, NULL, 10);
++	if (nvram_getenv("pa0b0", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa0b0", buf, sizeof(buf)) >= 0)
++		sprom->pa0b0 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa0b1", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa0b1", buf, sizeof(buf)) >= 0)
++		sprom->pa0b1 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa0b2", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa0b2", buf, sizeof(buf)) >= 0)
++		sprom->pa0b2 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa1b0", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa1b0", buf, sizeof(buf)) >= 0)
++		sprom->pa1b0 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa1b1", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa1b1", buf, sizeof(buf)) >= 0)
++		sprom->pa1b1 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa1b2", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa1b2", buf, sizeof(buf)) >= 0)
++		sprom->pa1b2 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("wl0gpio0", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("wl0gpio0", buf, sizeof(buf)) >= 0)
++		sprom->gpio0 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("wl0gpio1", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("wl0gpio1", buf, sizeof(buf)) >= 0)
++		sprom->gpio1 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("wl0gpio2", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("wl0gpio2", buf, sizeof(buf)) >= 0)
++		sprom->gpio2 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("wl0gpio3", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("wl0gpio3", buf, sizeof(buf)) >= 0)
++		sprom->gpio3 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa0maxpwr", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa0maxpwr", buf, sizeof(buf)) >= 0)
++		sprom->maxpwr_bg = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa1maxpwr", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa1maxpwr", buf, sizeof(buf)) >= 0)
++		sprom->maxpwr_a = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa0itssit", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa0itssit", buf, sizeof(buf)) >= 0)
++		sprom->itssi_bg = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa1itssit", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa1itssit", buf, sizeof(buf)) >= 0)
++		sprom->itssi_a = simple_strtoul(buf, NULL, 0);
++	sprom->boardflags_lo = 0;
++	if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("boardflags", buf, sizeof(buf)) >= 0)
++		sprom->boardflags_lo = simple_strtoul(buf, NULL, 0);
++	sprom->boardflags_hi = 0;
++	if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("boardflags", buf, sizeof(buf)) >= 0)
++		sprom->boardflags_hi = simple_strtoul(buf, NULL, 0);
++}
++
+ static int bcm47xx_get_invariants(struct ssb_bus *bus,
+ 				   struct ssb_init_invariants *iv)
+ {
+@@ -82,43 +162,19 @@ static int bcm47xx_get_invariants(struct
+ 	/* Fill boardinfo structure */
+ 	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
+ 
+-	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
++	iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
++	if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
+ 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
+-	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
+-		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
+-	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
++	if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
+ 		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
+ 
+-	/* Fill sprom structure */
+-	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
+-	iv->sprom.revision = 3;
+-
+-	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+-		str2eaddr(buf, iv->sprom.et0mac);
+-
+-	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+-		str2eaddr(buf, iv->sprom.et1mac);
+-
+-	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
+-		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
+-
+-	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
+-		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
+-
+-	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
+-		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
+-
+-	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
+-		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
++	bcm47xx_fill_sprom(&iv->sprom);
++
++	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("cardbus", buf, sizeof(buf)) >= 0)
++		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
+ 
+ 	return 0;
+ }

target/linux/brcm47xx/patches-2.6.34/013-MIPS-BCM47xx-Activate-SSB_B43_PCI_BRIDGE-by-default.patch

@@ -0,0 +1,23 @@
+From b1a0abc936bf61689d1e8a56c423b232cff24da5 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 13:58:09 +0200
+Subject: [PATCH 3/5] MIPS: BCM47xx: Activate SSB_B43_PCI_BRIDGE by default
+
+The b43_pci_bridge is needed to use the b43 driver with brcm47xx.
+Activate it by default if pci is available.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/Kconfig |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -62,6 +62,7 @@ config BCM47XX
+ 	select SSB_DRIVER_MIPS
+ 	select SSB_DRIVER_EXTIF
+ 	select SSB_EMBEDDED
++	select SSB_B43_PCI_BRIDGE if PCI
+ 	select SSB_PCICORE_HOSTMODE if PCI
+ 	select GENERIC_GPIO
+ 	select SYS_HAS_EARLY_PRINTK

target/linux/brcm47xx/patches-2.6.34/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch

@@ -0,0 +1,81 @@
+From 4c6a515310f29c89f25a54a115cde905f97330f8 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 14:59:24 +0200
+Subject: [PATCH 4/5] MIPS: BCM47xx: Setup and register serial early
+
+Swap the first and second serial if console=ttyS1 was set.
+Set it up and register it for early serial support.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/Kconfig         |    1 -
+ arch/mips/bcm47xx/setup.c |   36 +++++++++++++++++++++++++++++++++++-
+ 2 files changed, 35 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -65,7 +65,6 @@ config BCM47XX
+ 	select SSB_B43_PCI_BRIDGE if PCI
+ 	select SSB_PCICORE_HOSTMODE if PCI
+ 	select GENERIC_GPIO
+-	select SYS_HAS_EARLY_PRINTK
+ 	select CFE
+ 	help
+ 	 Support for BCM47XX based boards
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -28,6 +28,8 @@
+ #include <linux/types.h>
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_embedded.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+@@ -181,12 +183,44 @@ static int bcm47xx_get_invariants(struct
+ 
+ void __init plat_mem_setup(void)
+ {
+-	int err;
++	int i, err;
++	char buf[100];
++	struct ssb_mipscore *mcore;
+ 
+ 	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
+ 				      bcm47xx_get_invariants);
+ 	if (err)
+ 		panic("Failed to initialize SSB bus (err %d)\n", err);
++	mcore = &ssb_bcm47xx.mipscore;
++
++	nvram_getenv("kernel_args", buf, sizeof(buf));
++	if (!strncmp(buf, "console=ttyS1", 13)) {
++		struct ssb_serial_port port;
++
++		printk("Swapping serial ports!\n");
++		/* swap serial ports */
++		memcpy(&port, &mcore->serial_ports[0], sizeof(port));
++		memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], sizeof(port));
++		memcpy(&mcore->serial_ports[1], &port, sizeof(port));
++	}
++
++	for (i = 0; i < mcore->nr_serial_ports; i++) {
++		struct ssb_serial_port *port = &(mcore->serial_ports[i]);
++		struct uart_port s;
++
++		memset(&s, 0, sizeof(s));
++		s.line = i;
++		s.mapbase = (unsigned int) port->regs;
++		s.membase = port->regs;
++		s.irq = port->irq + 2;
++		s.uartclk = port->baud_base;
++		s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
++		s.iotype = SERIAL_IO_MEM;
++		s.regshift = port->reg_shift;
++
++		early_serial_setup(&s);
++	}
++	printk("Serial init done.\n");
+ 
+ 	_machine_restart = bcm47xx_machine_restart;
+ 	_machine_halt = bcm47xx_machine_halt;

target/linux/brcm47xx/patches-2.6.34/015-MIPS-BCM47xx-Remove-CFE-console.patch

@@ -0,0 +1,130 @@
+From 6bd2c73ed31a2dfe7eab04d32c17318a5c62f9d4 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 15:11:26 +0200
+Subject: [PATCH 5/5] MIPS: BCM47xx: Remove CFE console
+
+Do not use the CFE console. It causes hangs on some devices like the
+Buffalo WHR-HP-G54.
+This was reported in https://dev.openwrt.org/ticket/4061 and
+https://forum.openwrt.org/viewtopic.php?id=17063
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/prom.c |   82 +++------------------------------------------
+ 1 files changed, 6 insertions(+), 76 deletions(-)
+
+--- a/arch/mips/bcm47xx/prom.c
++++ b/arch/mips/bcm47xx/prom.c
+@@ -31,96 +31,28 @@
+ #include <asm/fw/cfe/cfe_api.h>
+ #include <asm/fw/cfe/cfe_error.h>
+ 
+-static int cfe_cons_handle;
+-
+ const char *get_system_type(void)
+ {
+ 	return "Broadcom BCM47XX";
+ }
+ 
+-void prom_putchar(char c)
+-{
+-	while (cfe_write(cfe_cons_handle, &c, 1) == 0)
+-		;
+-}
+-
+-static __init void prom_init_cfe(void)
++static __init int prom_init_cfe(void)
+ {
+ 	uint32_t cfe_ept;
+ 	uint32_t cfe_handle;
+ 	uint32_t cfe_eptseal;
+-	int argc = fw_arg0;
+-	char **envp = (char **) fw_arg2;
+-	int *prom_vec = (int *) fw_arg3;
+-
+-	/*
+-	 * Check if a loader was used; if NOT, the 4 arguments are
+-	 * what CFE gives us (handle, 0, EPT and EPTSEAL)
+-	 */
+-	if (argc < 0) {
+-		cfe_handle = (uint32_t)argc;
+-		cfe_ept = (uint32_t)envp;
+-		cfe_eptseal = (uint32_t)prom_vec;
+-	} else {
+-		if ((int)prom_vec < 0) {
+-			/*
+-			 * Old loader; all it gives us is the handle,
+-			 * so use the "known" entrypoint and assume
+-			 * the seal.
+-			 */
+-			cfe_handle = (uint32_t)prom_vec;
+-			cfe_ept = 0xBFC00500;
+-			cfe_eptseal = CFE_EPTSEAL;
+-		} else {
+-			/*
+-			 * Newer loaders bundle the handle/ept/eptseal
+-			 * Note: prom_vec is in the loader's useg
+-			 * which is still alive in the TLB.
+-			 */
+-			cfe_handle = prom_vec[0];
+-			cfe_ept = prom_vec[2];
+-			cfe_eptseal = prom_vec[3];
+-		}
+-	}
++
++	cfe_eptseal = (uint32_t) fw_arg3;
++	cfe_handle = (uint32_t) fw_arg0;
++	cfe_ept = (uint32_t) fw_arg2;
+ 
+ 	if (cfe_eptseal != CFE_EPTSEAL) {
+-		/* too early for panic to do any good */
+ 		printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
+-		while (1) ;
++		return -1;
+ 	}
+ 
+ 	cfe_init(cfe_handle, cfe_ept);
+-}
+-
+-static __init void prom_init_console(void)
+-{
+-	/* Initialize CFE console */
+-	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
+-}
+-
+-static __init void prom_init_cmdline(void)
+-{
+-	static char buf[COMMAND_LINE_SIZE] __initdata;
+-
+-	/* Get the kernel command line from CFE */
+-	if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
+-		buf[COMMAND_LINE_SIZE - 1] = 0;
+-		strcpy(arcs_cmdline, buf);
+-	}
+-
+-	/* Force a console handover by adding a console= argument if needed,
+-	 * as CFE is not available anymore later in the boot process. */
+-	if ((strstr(arcs_cmdline, "console=")) == NULL) {
+-		/* Try to read the default serial port used by CFE */
+-		if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
+-		    || (strncmp("uart", buf, 4)))
+-			/* Default to uart0 */
+-			strcpy(buf, "uart0");
+-
+-		/* Compute the new command line */
+-		snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
+-			 arcs_cmdline, buf[4]);
+-	}
++	return 0;
+ }
+ 
+ static __init void prom_init_mem(void)
+@@ -161,8 +93,6 @@ static __init void prom_init_mem(void)
+ void __init prom_init(void)
+ {
+ 	prom_init_cfe();
+-	prom_init_console();
+-	prom_init_cmdline();
+ 	prom_init_mem();
+ }
+ 

target/linux/brcm47xx/patches-2.6.34/021-USB-Add-USB-2.0-to-ssb-ohci-driver.patch

@@ -0,0 +1,95 @@
+From cb33ffbdd8491c58b35958ec74c39b3a5c7fabe8 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 21:25:03 +0200
+Subject: [PATCH 1/2] USB: Add USB 2.0 to ssb ohci driver
+
+This adds USB 2.0 support to ssb ohci driver.
+This work was done based on Braodcom source code in the OpenWRT project.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/ohci-ssb.c |   55 ++++++++++++++++++++++++++++++++++++++++--
+ 1 files changed, 52 insertions(+), 3 deletions(-)
+
+--- a/drivers/usb/host/ohci-ssb.c
++++ b/drivers/usb/host/ohci-ssb.c
+@@ -92,9 +92,12 @@ static const struct hc_driver ssb_ohci_h
+ static void ssb_ohci_detach(struct ssb_device *dev)
+ {
+ 	struct usb_hcd *hcd = ssb_get_drvdata(dev);
++	if (hcd->driver->shutdown)
++		hcd->driver->shutdown(hcd);
+ 
+ 	usb_remove_hcd(hcd);
+ 	iounmap(hcd->regs);
++	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ 	usb_put_hcd(hcd);
+ 	ssb_device_disable(dev, 0);
+ }
+@@ -106,10 +109,55 @@ static int ssb_ohci_attach(struct ssb_de
+ 	int err = -ENOMEM;
+ 	u32 tmp, flags = 0;
+ 
+-	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
+-		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
++	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
++	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
++		return -EOPNOTSUPP;
+ 
+-	ssb_device_enable(dev, flags);
++	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
++		/* Put the device into host-mode. */
++		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
++		ssb_device_enable(dev, flags);
++	} else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
++		/*
++		 * USB 2.0 special considerations:
++		 *
++		 * 1. Since the core supports both ehci and EHCI functions, it must
++		 *    only be reset once.
++		 *
++		 * 2. In addition to the standard SSB reset sequence, the Host Control
++		 *    Register must be programmed to bring the USB core and various
++		 *    phy components out of reset.
++		 */
++		ssb_device_enable(dev, 0);
++		ssb_write32(dev, 0x200, 0x7ff);
++
++		/* Change Flush control reg */
++		tmp = ssb_read32(dev, 0x400);
++		tmp &= ~8;
++		ssb_write32(dev, 0x400, tmp);
++		tmp = ssb_read32(dev, 0x400);
++
++		/* Change Shim control reg */
++		tmp = ssb_read32(dev, 0x304);
++		tmp &= ~0x100;
++		ssb_write32(dev, 0x304, tmp);
++		tmp = ssb_read32(dev, 0x304);
++
++		udelay(1);
++
++		/* Work around for 5354 failures */
++		if ((dev->id.revision == 2) && (dev->bus->chip_id == 0x5354)) {
++			/* Change syn01 reg */
++			tmp = 0x00fe00fe;
++			ssb_write32(dev, 0x894, tmp);
++
++			/* Change syn03 reg */
++			tmp = ssb_read32(dev, 0x89c);
++			tmp |= 0x1;
++			ssb_write32(dev, 0x89c, tmp);
++		}
++	} else
++		ssb_device_enable(dev, 0);
+ 
+ 	hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
+ 			dev_name(dev->dev));
+@@ -200,6 +248,7 @@ static int ssb_ohci_resume(struct ssb_de
+ static const struct ssb_device_id ssb_ohci_table[] = {
+ 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
+ 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
++	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
+ 	SSB_DEVTABLE_END
+ };
+ MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);

target/linux/brcm47xx/patches-2.6.34/022-USB-Add-ehci-ssb-driver.patch

@@ -1,9 +1,17 @@
+From cb269cf1f97c316a5184080814a751687c72b718 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 21:29:40 +0200
+Subject: [PATCH 2/2] USB: Add ehci ssb driver
+
+Support for the Sonics Silicon Backplane (SSB) attached Broadcom USB EHCI core.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 ---
  drivers/usb/host/Kconfig    |   13 ++
- drivers/usb/host/ehci-hcd.c |   12 ++
- drivers/usb/host/ehci-ssb.c |  201 ++++++++++++++++++++++++++++++++++++++++++++
- drivers/usb/host/ohci-ssb.c |   23 +++++
- 4 files changed, 247 insertions(+), 2 deletions(-)
+ drivers/usb/host/ehci-hcd.c |   23 ++++-
+ drivers/usb/host/ehci-ssb.c |  258 +++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 292 insertions(+), 2 deletions(-)
+ create mode 100644 drivers/usb/host/ehci-ssb.c
 
 --- a/drivers/usb/host/Kconfig
 +++ b/drivers/usb/host/Kconfig
@@ -13,7 +21,7 @@
  
 +config USB_EHCI_HCD_SSB
 +	bool "EHCI support for Broadcom SSB EHCI core"
-+	depends on USB_EHCI_HCD && SSB && EXPERIMENTAL
++	depends on USB_EHCI_HCD && (SSB = y || SSB = USB_EHCI_HCD) && EXPERIMENTAL
 +	default n
 +	---help---
 +	  Support for the Sonics Silicon Backplane (SSB) attached
@@ -29,33 +37,63 @@
  	depends on USB
 --- a/drivers/usb/host/ehci-hcd.c
 +++ b/drivers/usb/host/ehci-hcd.c
-@@ -1159,8 +1159,16 @@ MODULE_LICENSE ("GPL");
+@@ -1159,8 +1159,14 @@ MODULE_LICENSE ("GPL");
  #define	PLATFORM_DRIVER		ehci_atmel_driver
  #endif
  
--#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
--    !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
 +#ifdef CONFIG_USB_EHCI_HCD_SSB
 +#include "ehci-ssb.c"
-+#define SSB_EHCI_DRIVER         ssb_ehci_driver
++#define SSB_EHCI_DRIVER		ssb_ehci_driver
 +#endif
 +
-+#if !defined(PCI_DRIVER) && \
-+    !defined(PLATFORM_DRIVER) && \
-+    !defined(PS3_SYSTEM_BUS_DRIVER) && \
-+    !defined(OF_PLATFORM_DRIVER) && \
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+-    !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
++    !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
 +    !defined(SSB_EHCI_DRIVER)
  #error "missing bus glue for ehci-hcd"
  #endif
  
+@@ -1214,10 +1220,20 @@ static int __init ehci_hcd_init(void)
+ 	if (retval < 0)
+ 		goto clean3;
+ #endif
++
++#ifdef SSB_EHCI_DRIVER
++	retval = ssb_driver_register(&SSB_EHCI_DRIVER);
++	if (retval < 0)
++		goto clean4;
++#endif
+ 	return retval;
+ 
++#ifdef SSB_EHCI_DRIVER
++	/* ssb_driver_unregister(&SSB_EHCI_DRIVER); */
++clean4:
++#endif
+ #ifdef OF_PLATFORM_DRIVER
+-	/* of_unregister_platform_driver(&OF_PLATFORM_DRIVER); */
++	of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
+ clean3:
+ #endif
+ #ifdef PS3_SYSTEM_BUS_DRIVER
+@@ -1256,6 +1272,9 @@ static void __exit ehci_hcd_cleanup(void
+ #ifdef PS3_SYSTEM_BUS_DRIVER
+ 	ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+ #endif
++#ifdef SSB_EHCI_DRIVER
++	ssb_driver_unregister(&SSB_EHCI_DRIVER);
++#endif
+ #ifdef DEBUG
+ 	debugfs_remove(ehci_debug_root);
+ #endif
 --- /dev/null
 +++ b/drivers/usb/host/ehci-ssb.c
-@@ -0,0 +1,158 @@
+@@ -0,0 +1,258 @@
 +/*
 + * Sonics Silicon Backplane
 + * Broadcom USB-core EHCI driver (SSB bus glue)
 + *
 + * Copyright 2007 Steven Brown <sbrown@cortland.com>
++ * Copyright 2010 Hauke Mehrtens <hauke@hauke-m.de>
 + *
 + * Derived from the OHCI-SSB driver
 + * Copyright 2007 Michael Buesch <mb@bu3sch.de>
@@ -76,12 +114,9 @@
 + */
 +#include <linux/ssb/ssb.h>
 +
-+#define SSB_OHCI_TMSLOW_HOSTMODE	(1 << 29)
 +
 +struct ssb_ehci_device {
 +	struct ehci_hcd ehci; /* _must_ be at the beginning. */
-+
-+	u32 enable_flags;
 +};
 +
 +static inline
@@ -141,34 +176,78 @@
 +
 +	.hub_status_data	= ehci_hub_status_data,
 +	.hub_control		= ehci_hub_control,
++#if defined(CONFIG_PM)
 +	.bus_suspend		= ehci_bus_suspend,
 +	.bus_resume		= ehci_bus_resume,
++#endif
 +	.relinquish_port	= ehci_relinquish_port,
 +	.port_handed_over	= ehci_port_handed_over,
 +
 +	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 +};
 +
-+static void ssb_ehci_detach(struct ssb_device *dev, struct usb_hcd *hcd)
++static void ssb_ehci_detach(struct ssb_device *dev)
 +{
++	struct usb_hcd *hcd = ssb_get_drvdata(dev);
 +	if (hcd->driver->shutdown)
 +		hcd->driver->shutdown(hcd);
 +
 +	usb_remove_hcd(hcd);
-+
 +	iounmap(hcd->regs);
 +	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+
 +	usb_put_hcd(hcd);
++	ssb_device_disable(dev, 0);
 +}
-+EXPORT_SYMBOL_GPL(ssb_ehci_detach);
 +
-+static int ssb_ehci_attach(struct ssb_device *dev, struct usb_hcd **ehci_hcd)
++static int ssb_ehci_attach(struct ssb_device *dev)
 +{
 +	struct ssb_ehci_device *ehcidev;
 +	struct usb_hcd *hcd;
 +	int err = -ENOMEM;
-+	u32 tmp, flags = 0;
++	u32 tmp;
++
++	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
++	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
++		return -EOPNOTSUPP;
++
++	/*
++	 * USB 2.0 special considerations:
++	 *
++	 * 1. Since the core supports both ehci and EHCI functions, it must
++	 *    only be reset once.
++	 *
++	 * 2. In addition to the standard SSB reset sequence, the Host Control
++	 *    Register must be programmed to bring the USB core and various
++	 *    phy components out of reset.
++	 */
++	ssb_device_enable(dev, 0);
++	ssb_write32(dev, 0x200, 0x7ff);
++
++	/* Change Flush control reg */
++	tmp = ssb_read32(dev, 0x400);
++	tmp &= ~8;
++	ssb_write32(dev, 0x400, tmp);
++	tmp = ssb_read32(dev, 0x400);
++
++	/* Change Shim control reg */
++	tmp = ssb_read32(dev, 0x304);
++	tmp &= ~0x100;
++	ssb_write32(dev, 0x304, tmp);
++	tmp = ssb_read32(dev, 0x304);
++
++	udelay(1);
++
++	/* Work around for 5354 failures */
++	if ((dev->id.revision == 2) && (dev->bus->chip_id == 0x5354)) {
++		/* Change syn01 reg */
++		tmp = 0x00fe00fe;
++		ssb_write32(dev, 0x894, tmp);
++
++		/* Change syn03 reg */
++		tmp = ssb_read32(dev, 0x89c);
++		tmp |= 0x1;
++		ssb_write32(dev, 0x89c, tmp);
++	}
 +
 +	hcd = usb_create_hcd(&ssb_ehci_hc_driver, dev->dev,
 +			     dev_name(dev->dev));
@@ -176,7 +255,6 @@
 +		goto err_dev_disable;
 +
 +	ehcidev = hcd_to_ssb_ehci(hcd);
-+	ehcidev->enable_flags = flags;
 +	tmp = ssb_read32(dev, SSB_ADMATCH0);
 +	hcd->rsrc_start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
 +	hcd->rsrc_len = 0x100; /* ehci reg block size */
@@ -186,11 +264,11 @@
 +	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
 +	if (!hcd->regs)
 +		goto err_put_hcd;
-+	err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED | IRQF_DISABLED);
++	err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
 +	if (err)
 +		goto err_iounmap;
 +
-+	*ehci_hcd = hcd;
++	ssb_set_drvdata(dev, hcd);
 +
 +	return err;
 +
@@ -199,73 +277,72 @@
 +err_put_hcd:
 +	usb_put_hcd(hcd);
 +err_dev_disable:
-+	ssb_device_disable(dev, flags);
++	ssb_device_disable(dev, 0);
 +	return err;
 +}
-+EXPORT_SYMBOL_GPL(ssb_ehci_attach);
++
++static int ssb_ehci_probe(struct ssb_device *dev,
++		const struct ssb_device_id *id)
++{
++	int err;
++	u16 chipid_top;
++
++	/* USBcores are only connected on embedded devices. */
++	chipid_top = (dev->bus->chip_id & 0xFF00);
++	if (chipid_top != 0x4700 && chipid_top != 0x5300)
++		return -ENODEV;
++
++	/* TODO: Probably need checks here; is the core connected? */
++
++	if (usb_disabled())
++		return -ENODEV;
++
++	err = ssb_ehci_attach(dev);
++
++	return err;
++}
++
++static void ssb_ehci_remove(struct ssb_device *dev)
++{
++	ssb_ehci_detach(dev);
++}
++
++#ifdef CONFIG_PM
++
++static int ssb_ehci_suspend(struct ssb_device *dev, pm_message_t state)
++{
++	ssb_device_disable(dev, 0);
++
++	return 0;
++}
++
++static int ssb_ehci_resume(struct ssb_device *dev)
++{
++	struct usb_hcd *hcd = ssb_get_drvdata(dev);
++	struct ssb_ehci_device *ehcidev = hcd_to_ssb_ehci(hcd);
++
++	ssb_device_enable(dev, 0);
++
++	ehci_finish_controller_resume(hcd);
++	return 0;
++}
++
++#else /* !CONFIG_PM */
++#define ssb_ehci_suspend	NULL
++#define ssb_ehci_resume	NULL
++#endif /* CONFIG_PM */
 +
 +static const struct ssb_device_id ssb_ehci_table[] = {
 +	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
 +	SSB_DEVTABLE_END
 +};
 +MODULE_DEVICE_TABLE(ssb, ssb_ehci_table);
---- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -17,6 +17,8 @@
-  */
- #include <linux/ssb/ssb.h>
- 
-+extern int ssb_ehci_attach(struct ssb_device *dev, struct usb_hcd **hcd);
-+extern void ssb_ehci_detach(struct ssb_device *dev, struct usb_hcd *hcd);
- 
- #define SSB_OHCI_TMSLOW_HOSTMODE	(1 << 29)
- 
-@@ -24,6 +26,7 @@ struct ssb_ohci_device {
- 	struct ohci_hcd ohci; /* _must_ be at the beginning. */
- 
- 	u32 enable_flags;
-+	struct usb_hcd *ehci_hcd;
- };
- 
- static inline
-@@ -92,13 +95,25 @@ static const struct hc_driver ssb_ohci_h
- static void ssb_ohci_detach(struct ssb_device *dev)
- {
- 	struct usb_hcd *hcd = ssb_get_drvdata(dev);
-+#ifdef CONFIG_USB_EHCI_HCD_SSB
-+	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-+#endif
- 
- 	usb_remove_hcd(hcd);
- 	iounmap(hcd->regs);
- 	usb_put_hcd(hcd);
 +
-+#ifdef CONFIG_USB_EHCI_HCD_SSB
-+	/*
-+	 * Also detach ehci function
-+	 */
-+	if (dev->id.coreid == SSB_DEV_USB20_HOST)
-+		ssb_ehci_detach(dev, ohcidev->ehci_hcd);
-+#endif
- 	ssb_device_disable(dev, 0);
- }
- 
-+
- static int ssb_ohci_attach(struct ssb_device *dev)
- {
- 	struct ssb_ohci_device *ohcidev;
-@@ -165,6 +180,14 @@ static int ssb_ohci_attach(struct ssb_de
- 
- 	ssb_set_drvdata(dev, hcd);
- 
-+#ifdef CONFIG_USB_EHCI_HCD_SSB
-+	/*
-+	 * attach ehci function in this core
-+	 */
-+	if (dev->id.coreid == SSB_DEV_USB20_HOST)
-+		err = ssb_ehci_attach(dev, &(ohcidev->ehci_hcd));
-+#endif
-+
- 	return err;
- 
- err_iounmap:
++static struct ssb_driver ssb_ehci_driver = {
++	.name		= KBUILD_MODNAME,
++	.id_table	= ssb_ehci_table,
++	.probe		= ssb_ehci_probe,
++	.remove		= ssb_ehci_remove,
++	.suspend	= ssb_ehci_suspend,
++	.resume		= ssb_ehci_resume,
++};

target/linux/brcm47xx/patches-2.6.34/130-remove_scache.patch

@@ -1,89 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -205,7 +205,6 @@ config MIPS_MALTA
- 	select I8259
- 	select MIPS_BOARDS_GEN
- 	select MIPS_BONITO64
--	select MIPS_CPU_SCACHE
- 	select PCI_GT64XXX_PCI0
- 	select MIPS_MSC
- 	select SWAP_IO_SPACE
-@@ -1589,13 +1588,6 @@ config IP22_CPU_SCACHE
- 	bool
- 	select BOARD_SCACHE
- 
--#
--# Support for a MIPS32 / MIPS64 style S-caches
--#
--config MIPS_CPU_SCACHE
--	bool
--	select BOARD_SCACHE
--
- config R5000_CPU_SCACHE
- 	bool
- 	select BOARD_SCACHE
---- a/arch/mips/kernel/cpu-probe.c
-+++ b/arch/mips/kernel/cpu-probe.c
-@@ -772,6 +772,8 @@ static inline void cpu_probe_mips(struct
- 	case PRID_IMP_25KF:
- 		c->cputype = CPU_25KF;
- 		__cpu_name[cpu] = "MIPS 25Kc";
-+		/* Probe for L2 cache */
-+		c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
- 		break;
- 	case PRID_IMP_34K:
- 		c->cputype = CPU_34K;
---- a/arch/mips/mm/Makefile
-+++ b/arch/mips/mm/Makefile
-@@ -33,6 +33,5 @@ obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= c-oct
- obj-$(CONFIG_IP22_CPU_SCACHE)	+= sc-ip22.o
- obj-$(CONFIG_R5000_CPU_SCACHE)  += sc-r5k.o
- obj-$(CONFIG_RM7000_CPU_SCACHE)	+= sc-rm7k.o
--obj-$(CONFIG_MIPS_CPU_SCACHE)	+= sc-mips.o
- 
- EXTRA_CFLAGS += -Werror
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -1148,7 +1148,6 @@ static void __init loongson2_sc_init(voi
- 
- extern int r5k_sc_init(void);
- extern int rm7k_sc_init(void);
--extern int mips_sc_init(void);
- 
- static void __cpuinit setup_scache(void)
- {
-@@ -1202,29 +1201,17 @@ static void __cpuinit setup_scache(void)
- #endif
- 
- 	default:
--		if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
--		    c->isa_level == MIPS_CPU_ISA_M32R2 ||
--		    c->isa_level == MIPS_CPU_ISA_M64R1 ||
--		    c->isa_level == MIPS_CPU_ISA_M64R2) {
--#ifdef CONFIG_MIPS_CPU_SCACHE
--			if (mips_sc_init ()) {
--				scache_size = c->scache.ways * c->scache.sets * c->scache.linesz;
--				printk("MIPS secondary cache %ldkB, %s, linesize %d bytes.\n",
--				       scache_size >> 10,
--				       way_string[c->scache.ways], c->scache.linesz);
--			}
--#else
--			if (!(c->scache.flags & MIPS_CACHE_NOT_PRESENT))
--				panic("Dunno how to handle MIPS32 / MIPS64 second level cache");
--#endif
--			return;
--		}
- 		sc_present = 0;
- 	}
- 
- 	if (!sc_present)
- 		return;
- 
-+	if ((c->isa_level == MIPS_CPU_ISA_M32R1 ||
-+	     c->isa_level == MIPS_CPU_ISA_M64R1) &&
-+	    !(c->scache.flags & MIPS_CACHE_NOT_PRESENT))
-+		panic("Dunno how to handle MIPS32 / MIPS64 second level cache");
-+
- 	/* compute a couple of other cache variables */
- 	c->scache.waysize = scache_size / c->scache.ways;
- 

target/linux/brcm47xx/patches-2.6.34/150-cpu_fixes.patch

@@ -295,7 +295,7 @@
  	if (dc_lsize)
  		protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
  	if (!cpu_icache_snoops_remote_store && scache_size)
-@@ -1298,6 +1312,17 @@ static void __cpuinit coherency_setup(vo
+@@ -1311,6 +1325,17 @@ static void __cpuinit coherency_setup(vo
  	 * silly idea of putting something else there ...
  	 */
  	switch (current_cpu_type()) {
@@ -313,7 +313,7 @@
  	case CPU_R4000PC:
  	case CPU_R4000SC:
  	case CPU_R4000MC:
-@@ -1354,6 +1379,15 @@ void __cpuinit r4k_cache_init(void)
+@@ -1367,6 +1392,15 @@ void __cpuinit r4k_cache_init(void)
  		break;
  	}
  
@@ -329,7 +329,7 @@
  	probe_pcache();
  	setup_scache();
  
-@@ -1412,5 +1446,13 @@ void __cpuinit r4k_cache_init(void)
+@@ -1425,5 +1459,13 @@ void __cpuinit r4k_cache_init(void)
  #if !defined(CONFIG_MIPS_CMP)
  	local_r4k___flush_cache_all(NULL);
  #endif

target/linux/brcm47xx/patches-2.6.34/210-b44_phy_fix.patch

@@ -1,36 +1,58 @@
 --- a/drivers/net/b44.c
 +++ b/drivers/net/b44.c
-@@ -384,7 +384,7 @@ static void b44_set_flow_ctrl(struct b44
+@@ -381,11 +381,12 @@ static void b44_set_flow_ctrl(struct b44
  	__b44_set_flow_ctrl(bp, pause_enab);
  }
  
 -#ifdef SSB_DRIVER_MIPS
-+#ifdef CONFIG_SSB_DRIVER_MIPS
- extern char *nvram_get(char *name);
+-extern char *nvram_get(char *name);
++#ifdef CONFIG_BCM47XX
++
++#include <asm/mach-bcm47xx/nvram.h>
  static void b44_wap54g10_workaround(struct b44 *bp)
  {
-@@ -421,12 +421,45 @@ static inline void b44_wap54g10_workarou
- }
- #endif
+-	const char *str;
++	char buf[20];
+ 	u32 val;
+ 	int err;
  
-+#ifdef CONFIG_SSB_DRIVER_MIPS
+@@ -394,10 +395,9 @@ static void b44_wap54g10_workaround(stru
+ 	 * see https://dev.openwrt.org/ticket/146
+ 	 * check and reset bit "isolate"
+ 	 */
+-	str = nvram_get("boardnum");
+-	if (!str)
++	if (nvram_getenv("boardnum", buf, sizeof(buf)) > 0)
+ 		return;
+-	if (simple_strtoul(str, NULL, 0) == 2) {
++	if (simple_strtoul(buf, NULL, 0) == 2) {
+ 		err = __b44_readphy(bp, 0, MII_BMCR, &val);
+ 		if (err)
+ 			goto error;
+@@ -412,10 +412,43 @@ static void b44_wap54g10_workaround(stru
+ error:
+ 	pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
+ }
++
 +static inline int startswith (const char *source, const char *cmp) 
 +{ 
 +       return !strncmp(source,cmp,strlen(cmp)); 
 +}
 +
-+#define getvar(str) (nvram_get(str) ? : "")
-+
 +static inline void b44_bcm47xx_workarounds(struct b44 *bp)
 +{
++	char buf[20];
 +	/* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
-+	if (simple_strtoul(getvar("boardnum"), NULL, 0) == 100) {
++	if (nvram_getenv("boardnum", buf, sizeof(buf)) > 0)
++		return;
++	if (simple_strtoul(buf, NULL, 0) == 100) {
 +		bp->phy_addr = B44_PHY_ADDR_NO_PHY;
 +	} else {
 +		/* WL-HDD */
 +		struct ssb_device *sdev = bp->sdev;
-+		if (startswith(getvar("hardware_version"), "WL300-")) 
-+		{
++		if (nvram_getenv("hardware_version", buf, sizeof(buf)) > 0)
++			return;
++		if (startswith(buf, "WL300-")) {
 +			if (sdev->bus->sprom.et0phyaddr == 0 &&
 +			    sdev->bus->sprom.et1phyaddr == 1)
 +				bp->phy_addr = B44_PHY_ADDR_NO_PHY;
@@ -39,15 +61,19 @@
 +	return;
 +}
 +
-+#else
+ #else
++
+ static inline void b44_wap54g10_workaround(struct b44 *bp)
+ {
+ }
++
 +static inline void b44_bcm47xx_workarounds(struct b44 *bp) 
 +{ 
 +}
-+#endif
-+
+ #endif
+ 
  static int b44_setup_phy(struct b44 *bp)
- {
- 	u32 val;
+@@ -424,6 +457,7 @@ static int b44_setup_phy(struct b44 *bp)
  	int err;
  
  	b44_wap54g10_workaround(bp);
@@ -55,7 +81,7 @@
  
  	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
  		return 0;
-@@ -2089,6 +2122,8 @@ static int __devinit b44_get_invariants(
+@@ -2080,6 +2114,8 @@ static int __devinit b44_get_invariants(
  	 * valid PHY address. */
  	bp->phy_addr &= 0x1F;
  

target/linux/brcm47xx/patches-2.6.34/211-b44_timeout_spam.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/b44.c
 +++ b/drivers/net/b44.c
-@@ -191,10 +190,11 @@ static int b44_wait_bit(struct b44 *bp, 
+@@ -188,10 +188,11 @@ static int b44_wait_bit(struct b44 *bp, 
  		udelay(10);
  	}
  	if (i == timeout) {

target/linux/brcm47xx/patches-2.6.34/220-bcm5354.patch

@@ -1,6 +1,6 @@
 --- a/drivers/ssb/driver_chipcommon.c
 +++ b/drivers/ssb/driver_chipcommon.c
-@@ -260,6 +260,8 @@ void ssb_chipco_resume(struct ssb_chipco
+@@ -285,6 +285,8 @@ void ssb_chipco_resume(struct ssb_chipco
  void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
                               u32 *plltype, u32 *n, u32 *m)
  {
@@ -9,7 +9,7 @@
  	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
  	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
  	switch (*plltype) {
-@@ -283,6 +285,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
+@@ -308,6 +310,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
  void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
  				 u32 *plltype, u32 *n, u32 *m)
  {
@@ -31,7 +31,7 @@
  	}
 --- a/drivers/ssb/main.c
 +++ b/drivers/ssb/main.c
-@@ -1073,6 +1073,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+@@ -1075,6 +1075,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
  
  	if (bus->chip_id == 0x5365) {
  		rate = 100000000;

target/linux/brcm47xx/patches-2.6.34/250-ohci-ssb-usb2.patch

@@ -1,60 +0,0 @@
----
- drivers/usb/host/ohci-ssb.c |   39 ++++++++++++++++++++++++++++++++++++---
- 1 file changed, 36 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -106,10 +106,42 @@ static int ssb_ohci_attach(struct ssb_de
- 	int err = -ENOMEM;
- 	u32 tmp, flags = 0;
- 
--	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
-+	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
-+		/* Put the device into host-mode. */
- 		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
--
--	ssb_device_enable(dev, flags);
-+		ssb_device_enable(dev, flags);
-+	} else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-+		/*
-+		 * USB 2.0 special considerations:
-+		 *
-+		 * 1. Since the core supports both OHCI and EHCI functions, it must
-+		 *    only be reset once.
-+		 *
-+		 * 2. In addition to the standard SSB reset sequence, the Host Control
-+		 *    Register must be programmed to bring the USB core and various
-+		 *    phy components out of reset.
-+		 */
-+		ssb_device_enable(dev, 0);
-+		ssb_write32(dev, 0x200, 0x7ff);
-+		udelay(1);
-+		if (dev->id.revision == 1) { // bug in rev 1
-+
-+			/* Change Flush control reg */
-+			tmp = ssb_read32(dev, 0x400);
-+			tmp &= ~8;
-+			ssb_write32(dev, 0x400, tmp);
-+			tmp = ssb_read32(dev, 0x400);
-+			printk("USB20H fcr: 0x%0x\n", tmp);
-+
-+			/* Change Shim control reg */
-+			tmp = ssb_read32(dev, 0x304);
-+			tmp &= ~0x100;
-+			ssb_write32(dev, 0x304, tmp);
-+			tmp = ssb_read32(dev, 0x304);
-+			printk("USB20H shim: 0x%0x\n", tmp);
-+		}
-+	} else
-+		ssb_device_enable(dev, 0);
- 
- 	hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
- 			dev_name(dev->dev));
-@@ -200,6 +232,7 @@ static int ssb_ohci_resume(struct ssb_de
- static const struct ssb_device_id ssb_ohci_table[] = {
- 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
- 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
- 	SSB_DEVTABLE_END
- };
- MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);

target/linux/brcm47xx/patches-2.6.34/260-ohci-set-dma-mask.patch

@@ -1,16 +0,0 @@
----
- drivers/usb/host/ohci-ssb.c |    3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -106,6 +106,9 @@ static int ssb_ohci_attach(struct ssb_de
- 	int err = -ENOMEM;
- 	u32 tmp, flags = 0;
- 
-+	if (ssb_dma_set_mask(dev, DMA_BIT_MASK(32)))
-+		return -EOPNOTSUPP;
-+
- 	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
- 		/* Put the device into host-mode. */
- 		flags |= SSB_OHCI_TMSLOW_HOSTMODE;

target/linux/brcm47xx/patches-2.6.34/275-usb2-bcm5354-init.patch

@@ -1,63 +0,0 @@
-This patch significantly improves the reliability of high speed 
-usb writes on the bcm5354. It implements a work around for version 2
-of the usb20 core that was cribbed from the GPL sources for the 
-Asus wl500gpv2 and verified against the wl520gu sources.
-
-Reference:
-GPL/WL-520gu-NewUI/src/linux/linux/arch/mips/brcm-boards/bcm947xx/pcibios.c
-GPL/WL-500gPV2-NewUI/src/linux/linux/arch/mips/brcm-boards/bcm947xx/pcibios.c
-
-Signed-off-by: Steve Brown <sbrown@cortland.com>
-
----
- drivers/usb/host/ohci-ssb.c |   37 +++++++++++++++++++++++--------------
- 1 file changed, 23 insertions(+), 14 deletions(-)
-
---- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -141,22 +141,31 @@ static int ssb_ohci_attach(struct ssb_de
- 		 */
- 		ssb_device_enable(dev, 0);
- 		ssb_write32(dev, 0x200, 0x7ff);
-+
-+		/* Change Flush control reg */
-+		tmp = ssb_read32(dev, 0x400);
-+		tmp &= ~8;
-+		ssb_write32(dev, 0x400, tmp);
-+		tmp = ssb_read32(dev, 0x400);
-+
-+		/* Change Shim control reg */
-+		tmp = ssb_read32(dev, 0x304);
-+		tmp &= ~0x100;
-+		ssb_write32(dev, 0x304, tmp);
-+		tmp = ssb_read32(dev, 0x304);
-+
- 		udelay(1);
--		if (dev->id.revision == 1) { // bug in rev 1
- 
--			/* Change Flush control reg */
--			tmp = ssb_read32(dev, 0x400);
--			tmp &= ~8;
--			ssb_write32(dev, 0x400, tmp);
--			tmp = ssb_read32(dev, 0x400);
--			printk("USB20H fcr: 0x%0x\n", tmp);
--
--			/* Change Shim control reg */
--			tmp = ssb_read32(dev, 0x304);
--			tmp &= ~0x100;
--			ssb_write32(dev, 0x304, tmp);
--			tmp = ssb_read32(dev, 0x304);
--			printk("USB20H shim: 0x%0x\n", tmp);
-+		/* Work around for 5354 failures */
-+		if ((dev->id.revision == 2) && (dev->bus->chip_id == 0x5354)) {
-+			/* Change syn01 reg */
-+			tmp = 0x00fe00fe;
-+			ssb_write32(dev, 0x894, tmp);
-+
-+			/* Change syn03 reg */
-+			tmp = ssb_read32(dev, 0x89c);
-+			tmp |= 0x1;
-+			ssb_write32(dev, 0x89c, tmp);
- 		}
- 	} else
- 		ssb_device_enable(dev, 0);

target/linux/brcm47xx/patches-2.6.34/301-kmod-fuse-dcache-bug-r4k.patch

@@ -18,7 +18,7 @@
  	unsigned long addr, unsigned long pfn)
  {
  	struct flush_cache_page_args args;
-@@ -1456,3 +1456,10 @@ void __cpuinit r4k_cache_init(void)
+@@ -1469,3 +1469,10 @@ void __cpuinit r4k_cache_init(void)
  	coherency_setup();
  #endif
  }

target/linux/brcm47xx/patches-2.6.34/400-arch-bcm47xx.patch

@@ -1,280 +1,39 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -62,6 +62,7 @@ config BCM47XX
- 	select SSB_DRIVER_MIPS
- 	select SSB_DRIVER_EXTIF
- 	select SSB_EMBEDDED
-+	select SSB_B43_PCI_BRIDGE if PCI
- 	select SSB_PCICORE_HOSTMODE if PCI
- 	select GENERIC_GPIO
- 	select SYS_HAS_EARLY_PRINTK
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -3,4 +3,4 @@
- # under Linux.
- #
- 
--obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o
-+obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
---- a/arch/mips/bcm47xx/irq.c
-+++ b/arch/mips/bcm47xx/irq.c
-@@ -1,5 +1,6 @@
- /*
-  *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
-+ *  Copyright (C) 2008 Michael Buesch <mb@bu3sch.de>
-  *
-  *  This program is free software; you can redistribute  it and/or modify it
-  *  under  the terms of  the GNU General  Public License as published by the
-@@ -23,10 +24,19 @@
-  */
- 
- #include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
-+#include <linux/pci.h>
-+#include <linux/ssb/ssb.h>
-+
- #include <asm/irq_cpu.h>
- 
-+
-+extern struct ssb_bus ssb_bcm47xx;
-+
-+
- void plat_irq_dispatch(void)
- {
- 	u32 cause;
 --- a/arch/mips/bcm47xx/nvram.c
 +++ b/arch/mips/bcm47xx/nvram.c
-@@ -24,10 +24,10 @@
- #include <asm/io.h>
- #include <asm/uaccess.h>
- 
--#include <nvram.h>
-+#include "include/nvram.h"
- 
- #define MB * 1048576
--extern struct ssb_bus ssb;
-+extern struct ssb_bus ssb_bcm47xx;
- 
- static char nvram_buf[NVRAM_SPACE];
- static int cfe_env;
-@@ -36,7 +36,7 @@ extern char *cfe_env_get(char *nv_buf, c
- /* Probe for NVRAM header */
- static void __init early_nvram_init(void)
- {
--	struct ssb_mipscore *mcore = &ssb.mipscore;
-+	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
- 	struct nvram_header *header;
- 	int i;
- 	u32 base, lim, off;
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -2,7 +2,7 @@
-  *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
-  *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
-  *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-- *  Copyright (C) 2006 Michael Buesch <mb@bu3sch.de>
-+ *  Copyright (C) 2006-2008 Michael Buesch <mb@bu3sch.de>
-  *
-  *  This program is free software; you can redistribute  it and/or modify it
-  *  under  the terms of  the GNU General  Public License as published by the
-@@ -25,18 +25,28 @@
-  *  675 Mass Ave, Cambridge, MA 02139, USA.
-  */
- 
-+#include <linux/init.h>
- #include <linux/types.h>
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
-+#include <linux/tty.h>
-+#include <linux/serial.h>
-+#include <linux/serial_core.h>
-+#include <linux/serial_reg.h>
-+#include <linux/serial_8250.h>
- #include <asm/bootinfo.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
--#include <bcm47xx.h>
- #include <asm/fw/cfe/cfe_api.h>
-+#include <linux/pm.h>
-+
-+#include "include/nvram.h"
- 
- struct ssb_bus ssb_bcm47xx;
- EXPORT_SYMBOL(ssb_bcm47xx);
- 
-+extern void bcm47xx_pci_init(void);
-+
- static void bcm47xx_machine_restart(char *command)
- {
- 	printk(KERN_ALERT "Please stand by while rebooting the system...\n");
-@@ -56,7 +66,7 @@ static void bcm47xx_machine_halt(void)
- 		cpu_relax();
+@@ -92,3 +92,30 @@ int nvram_getenv(char *name, char *val, 
+ 	return 1;
  }
- 
--static void str2eaddr(char *str, char *dest)
-+static void e_aton(char *str, char *dest)
- {
- 	int i = 0;
- 
-@@ -73,51 +83,142 @@ static void str2eaddr(char *str, char *d
- 	}
- }
- 
--static int bcm47xx_get_invariants(struct ssb_bus *bus,
--				   struct ssb_init_invariants *iv)
-+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
+ EXPORT_SYMBOL(nvram_getenv);
++
++char *nvram_get(const char *name)
 +{
-+	char *s;
++	char *var, *value, *end, *eq;
 +
-+	memset(sprom, 0xFF, sizeof(struct ssb_sprom));
++	if (!name)
++		return NULL;
 +
-+	sprom->revision = 1;
-+	if ((s = nvram_get("il0macaddr")))
-+		e_aton(s, sprom->il0mac);
-+	if ((s = nvram_get("et0macaddr")))
-+		e_aton(s, sprom->et0mac);
-+	if ((s = nvram_get("et1macaddr")))
-+		e_aton(s, sprom->et1mac);
-+	if ((s = nvram_get("et0phyaddr")))
-+		sprom->et0phyaddr = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("et1phyaddr")))
-+		sprom->et1phyaddr = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("et0mdcport")))
-+		sprom->et0mdcport = !!simple_strtoul(s, NULL, 10);
-+	if ((s = nvram_get("et1mdcport")))
-+		sprom->et1mdcport = !!simple_strtoul(s, NULL, 10);
-+	if ((s = nvram_get("pa0b0")))
-+		sprom->pa0b0 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa0b1")))
-+		sprom->pa0b1 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa0b2")))
-+		sprom->pa0b2 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa1b0")))
-+		sprom->pa1b0 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa1b1")))
-+		sprom->pa1b1 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa1b2")))
-+		sprom->pa1b2 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("wl0gpio0")))
-+		sprom->gpio0 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("wl0gpio1")))
-+		sprom->gpio1 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("wl0gpio2")))
-+		sprom->gpio2 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("wl0gpio3")))
-+		sprom->gpio3 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa0maxpwr")))
-+		sprom->maxpwr_bg = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa1maxpwr")))
-+		sprom->maxpwr_a = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa0itssit")))
-+		sprom->itssi_bg = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa1itssit")))
-+		sprom->itssi_a = simple_strtoul(s, NULL, 0);
-+	sprom->boardflags_lo = 0;
-+	if ((s = nvram_get("boardflags")))
-+		sprom->boardflags_lo = simple_strtoul(s, NULL, 0);
-+	sprom->boardflags_hi = 0;
-+	if ((s = nvram_get("boardflags2")))
-+		sprom->boardflags_hi = simple_strtoul(s, NULL, 0);
++	if (!nvram_buf[0])
++		early_nvram_init();
++
++	/* Look for name=value and return value */
++	var = &nvram_buf[sizeof(struct nvram_header)];
++	end = nvram_buf + sizeof(nvram_buf) - 2;
++	end[0] = end[1] = '\0';
++	for (; *var; var = value + strlen(value) + 1) {
++		if (!(eq = strchr(var, '=')))
++			break;
++		value = eq + 1;
++		if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
++			return value;
++	}
++
++	return NULL;
 +}
 +
-+static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv)
- {
--	char buf[100];
-+	char *s;
-+
-+	iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
-+	if ((s = nvram_get("boardtype")))
-+		iv->boardinfo.type = (u16)simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("boardrev")))
-+		iv->boardinfo.rev = (u16)simple_strtoul(s, NULL, 0);
- 
--	/* Fill boardinfo structure */
--	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
-+	bcm47xx_fill_sprom(&iv->sprom);
- 
--	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0)
--		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
--	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
--		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
--	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
--		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
--
--	/* Fill sprom structure */
--	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
--	iv->sprom.revision = 3;
--
--	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
--		str2eaddr(buf, iv->sprom.et0mac);
--	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
--		str2eaddr(buf, iv->sprom.et1mac);
--	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
--		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10);
--	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
--		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10);
--	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
--		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
--	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
--		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
-+	if ((s = nvram_get("cardbus")))
-+		iv->has_cardbus_slot = !!simple_strtoul(s, NULL, 10);
- 
- 	return 0;
- }
- 
- void __init plat_mem_setup(void)
- {
--	int err;
-+	int i, err;
-+	char *s;
-+	struct ssb_mipscore *mcore;
-+
-+	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, bcm47xx_get_invariants);
-+	if (err) {
-+		const char *msg = "Failed to initialize SSB bus (err %d)\n";
-+		printk(msg, err); /* Make sure the message gets out of the box. */
-+		panic(msg, err);
-+	}
-+	mcore = &ssb_bcm47xx.mipscore;
- 
--	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
--				      bcm47xx_get_invariants);
--	if (err)
--		panic("Failed to initialize SSB bus (err %d)\n", err);
-+	s = nvram_get("kernel_args");
-+	if (s && !strncmp(s, "console=ttyS1", 13)) {
-+		struct ssb_serial_port port;
-+
-+		printk("Swapping serial ports!\n");
-+		/* swap serial ports */
-+		memcpy(&port, &mcore->serial_ports[0], sizeof(port));
-+		memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], sizeof(port));
-+		memcpy(&mcore->serial_ports[1], &port, sizeof(port));
-+	}
-+
-+	for (i = 0; i < mcore->nr_serial_ports; i++) {
-+		struct ssb_serial_port *port = &(mcore->serial_ports[i]);
-+		struct uart_port s;
-+
-+		memset(&s, 0, sizeof(s));
-+		s.line = i;
-+		s.mapbase = (unsigned int) port->regs;
-+		s.membase = port->regs;
-+		s.irq = port->irq + 2;
-+		s.uartclk = port->baud_base;
-+		s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
-+		s.iotype = SERIAL_IO_MEM;
-+		s.regshift = port->reg_shift;
-+
-+		early_serial_setup(&s);
-+	}
-+	printk("Serial init done.\n");
- 
- 	_machine_restart = bcm47xx_machine_restart;
++EXPORT_SYMBOL(nvram_get);
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -226,3 +226,20 @@ void __init plat_mem_setup(void)
  	_machine_halt = bcm47xx_machine_halt;
  	pm_power_off = bcm47xx_machine_halt;
  }
@@ -295,25 +54,3 @@
 +	return 0;
 +}
 +device_initcall(bcm47xx_register_gpiodev);
---- a/arch/mips/bcm47xx/time.c
-+++ b/arch/mips/bcm47xx/time.c
-@@ -22,11 +22,17 @@
-  *  675 Mass Ave, Cambridge, MA 02139, USA.
-  */
- 
--
- #include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/serial_reg.h>
-+#include <linux/interrupt.h>
- #include <linux/ssb/ssb.h>
-+#include <asm/addrspace.h>
-+#include <asm/io.h>
- #include <asm/time.h>
--#include <bcm47xx.h>
-+
-+extern struct ssb_bus ssb_bcm47xx;
- 
- void __init plat_time_init(void)
- {

target/linux/brcm47xx/patches-2.6.34/800-fix_cfe_detection.patch

@@ -1,108 +0,0 @@
---- a/arch/mips/bcm47xx/prom.c
-+++ b/arch/mips/bcm47xx/prom.c
-@@ -32,6 +32,7 @@
- #include <asm/fw/cfe/cfe_error.h>
- 
- static int cfe_cons_handle;
-+static void (* __prom_putchar)(char c);
- 
- const char *get_system_type(void)
- {
-@@ -40,65 +41,40 @@ const char *get_system_type(void)
- 
- void prom_putchar(char c)
- {
-+	if (__prom_putchar)
-+		__prom_putchar(c);
-+}
-+
-+void prom_putchar_cfe(char c)
-+{
- 	while (cfe_write(cfe_cons_handle, &c, 1) == 0)
- 		;
- }
- 
--static __init void prom_init_cfe(void)
-+static __init int prom_init_cfe(void)
- {
- 	uint32_t cfe_ept;
- 	uint32_t cfe_handle;
- 	uint32_t cfe_eptseal;
--	int argc = fw_arg0;
--	char **envp = (char **) fw_arg2;
--	int *prom_vec = (int *) fw_arg3;
--
--	/*
--	 * Check if a loader was used; if NOT, the 4 arguments are
--	 * what CFE gives us (handle, 0, EPT and EPTSEAL)
--	 */
--	if (argc < 0) {
--		cfe_handle = (uint32_t)argc;
--		cfe_ept = (uint32_t)envp;
--		cfe_eptseal = (uint32_t)prom_vec;
--	} else {
--		if ((int)prom_vec < 0) {
--			/*
--			 * Old loader; all it gives us is the handle,
--			 * so use the "known" entrypoint and assume
--			 * the seal.
--			 */
--			cfe_handle = (uint32_t)prom_vec;
--			cfe_ept = 0xBFC00500;
--			cfe_eptseal = CFE_EPTSEAL;
--		} else {
--			/*
--			 * Newer loaders bundle the handle/ept/eptseal
--			 * Note: prom_vec is in the loader's useg
--			 * which is still alive in the TLB.
--			 */
--			cfe_handle = prom_vec[0];
--			cfe_ept = prom_vec[2];
--			cfe_eptseal = prom_vec[3];
--		}
--	}
- 
--	if (cfe_eptseal != CFE_EPTSEAL) {
--		/* too early for panic to do any good */
--		printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
--		while (1) ;
--	}
-+	cfe_eptseal = (uint32_t) fw_arg3;
-+	cfe_handle = (uint32_t) fw_arg0;
-+	cfe_ept = (uint32_t) fw_arg2;
-+
-+	if (cfe_eptseal != CFE_EPTSEAL)
-+		return -1;
- 
- 	cfe_init(cfe_handle, cfe_ept);
-+	return 0;
- }
- 
--static __init void prom_init_console(void)
-+static __init void prom_init_console_cfe(void)
- {
- 	/* Initialize CFE console */
- 	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
- }
- 
--static __init void prom_init_cmdline(void)
-+static __init void prom_init_cmdline_cfe(void)
- {
- 	static char buf[COMMAND_LINE_SIZE] __initdata;
- 
-@@ -160,9 +136,12 @@ static __init void prom_init_mem(void)
- 
- void __init prom_init(void)
- {
--	prom_init_cfe();
--	prom_init_console();
--	prom_init_cmdline();
-+	if (prom_init_cfe() == 0) {
-+		//prom_init_console_cfe();
-+		//prom_init_cmdline_cfe();
-+		__prom_putchar = prom_putchar_cfe;
-+	}
-+
- 	prom_init_mem();
- }
- 

target/linux/brcm47xx/patches-2.6.34/812-disable_wgt634u_crap.patch

@@ -4,8 +4,8 @@
  # under Linux.
  #
  
--obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
-+obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
+-obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
++obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
 --- a/arch/mips/bcm47xx/wgt634u.c
 +++ /dev/null
 @@ -1,166 +0,0 @@

target/linux/brcm47xx/patches-2.6.34/900-disable_early_printk.patch

@@ -1,10 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -65,7 +65,6 @@ config BCM47XX
- 	select SSB_B43_PCI_BRIDGE if PCI
- 	select SSB_PCICORE_HOSTMODE if PCI
- 	select GENERIC_GPIO
--	select SYS_HAS_EARLY_PRINTK
- 	select CFE
- 	help
- 	 Support for BCM47XX based boards

target/linux/brcm47xx/patches-2.6.34/940-bcm47xx-yenta.patch

@@ -17,7 +17,7 @@
  
  	mask = probe_irq_mask(val) & 0xffff;
  
-@@ -1022,6 +1025,10 @@ static void yenta_get_socket_capabilitie
+@@ -1023,6 +1026,10 @@ static void yenta_get_socket_capabilitie
  	else
  		socket->socket.irq_mask = 0;
  
@@ -28,7 +28,7 @@
  	dev_printk(KERN_INFO, &socket->dev->dev,
  		   "ISA IRQ mask 0x%04x, PCI irq %d\n",
  		   socket->socket.irq_mask, socket->cb_irq);
-@@ -1260,6 +1267,15 @@ static int __devinit yenta_probe(struct 
+@@ -1261,6 +1268,15 @@ static int __devinit yenta_probe(struct 
  	dev_printk(KERN_INFO, &dev->dev,
  		   "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
  

target/linux/brcm47xx/patches-2.6.34/999-wl_exports.patch

@@ -1,16 +1,15 @@
 --- a/arch/mips/bcm47xx/nvram.c
 +++ b/arch/mips/bcm47xx/nvram.c
-@@ -29,7 +29,9 @@
- #define MB * 1048576
- extern struct ssb_bus ssb_bcm47xx;
+@@ -20,7 +20,8 @@
+ #include <asm/mach-bcm47xx/nvram.h>
+ #include <asm/mach-bcm47xx/bcm47xx.h>
  
 -static char nvram_buf[NVRAM_SPACE];
 +char nvram_buf[NVRAM_SPACE];
 +EXPORT_SYMBOL(nvram_buf);
-+
- static int cfe_env;
- extern char *cfe_env_get(char *nv_buf, const char *name);
  
+ /* Probe for NVRAM header */
+ static void __init early_nvram_init(void)
 --- a/arch/mips/mm/cache.c
 +++ b/arch/mips/mm/cache.c
 @@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s

target/linux/brcm47xx/patches-2.6.35/011-MIPS-BCM47xx-Really-fix-128MB-RAM-problem.patch

@@ -1,3 +1,24 @@
+From b6d850fe4035d6bee7199119358e06f802aa19ed Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 12:49:41 +0200
+Subject: [PATCH 1/5] MIPS: BCM47xx: Really fix 128MB RAM problem
+
+The previews patch 84a6fcb368a080620d12fc4d79e07902dbee7335 was wrong,
+I got wrong success reports.
+
+The bcm47xx architecture maps the ram into a 128MB address space. It
+will be paced there as often as goes into the 128MB. The detection
+tries to find the position where the same memory is found. When reading
+over 128MB the processor will throw an exception. If 128MB ram is
+installed, it will not find the same memory because it tries to read
+over the 128MB boarder. Now it just assumes 128MB installed ram if it
+can not find that the ram is repeating.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/prom.c |   22 ++++++++++++++--------
+ 1 files changed, 14 insertions(+), 8 deletions(-)
+
 --- a/arch/mips/bcm47xx/prom.c
 +++ b/arch/mips/bcm47xx/prom.c
 @@ -126,6 +126,7 @@ static __init void prom_init_cmdline(voi

target/linux/brcm47xx/patches-2.6.35/012-MIPS-BCM47xx-Fill-more-values-into-ssb-sprom.patch

@@ -0,0 +1,158 @@
+From d6c049e08568aac29fff854ea0385e63c7150e09 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 13:34:32 +0200
+Subject: [PATCH 2/5] MIPS: BCM47xx: Fill more values into ssb sprom
+
+Most of the values are stored in the nvram and not in the CFE. At first
+the nvram should be read and if there is no value it should look into
+the CFE. Now more values are read out because the b43 and b43legacy
+drivers needs them.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/setup.c |  122 +++++++++++++++++++++++++++++++++------------
+ 1 files changed, 89 insertions(+), 33 deletions(-)
+
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -74,6 +74,86 @@ static void str2eaddr(char *str, char *d
+ 	}
+ }
+ 
++static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
++{
++	char buf[100];
++
++	memset(sprom, 0, sizeof(struct ssb_sprom));
++
++	sprom->revision = 3;
++	if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
++		str2eaddr(buf, sprom->il0mac);
++	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
++		str2eaddr(buf, sprom->et0mac);
++	if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
++		str2eaddr(buf, sprom->et1mac);
++	if (nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
++		sprom->et0phyaddr = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
++		sprom->et1phyaddr = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
++		sprom->et0mdcport = !!simple_strtoul(buf, NULL, 10);
++	if (nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
++		sprom->et1mdcport = !!simple_strtoul(buf, NULL, 10);
++	if (nvram_getenv("pa0b0", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa0b0", buf, sizeof(buf)) >= 0)
++		sprom->pa0b0 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa0b1", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa0b1", buf, sizeof(buf)) >= 0)
++		sprom->pa0b1 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa0b2", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa0b2", buf, sizeof(buf)) >= 0)
++		sprom->pa0b2 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa1b0", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa1b0", buf, sizeof(buf)) >= 0)
++		sprom->pa1b0 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa1b1", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa1b1", buf, sizeof(buf)) >= 0)
++		sprom->pa1b1 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa1b2", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa1b2", buf, sizeof(buf)) >= 0)
++		sprom->pa1b2 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("wl0gpio0", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("wl0gpio0", buf, sizeof(buf)) >= 0)
++		sprom->gpio0 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("wl0gpio1", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("wl0gpio1", buf, sizeof(buf)) >= 0)
++		sprom->gpio1 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("wl0gpio2", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("wl0gpio2", buf, sizeof(buf)) >= 0)
++		sprom->gpio2 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("wl0gpio3", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("wl0gpio3", buf, sizeof(buf)) >= 0)
++		sprom->gpio3 = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa0maxpwr", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa0maxpwr", buf, sizeof(buf)) >= 0)
++		sprom->maxpwr_bg = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa1maxpwr", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa1maxpwr", buf, sizeof(buf)) >= 0)
++		sprom->maxpwr_a = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa0itssit", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa0itssit", buf, sizeof(buf)) >= 0)
++		sprom->itssi_bg = simple_strtoul(buf, NULL, 0);
++	if (nvram_getenv("pa1itssit", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("pa1itssit", buf, sizeof(buf)) >= 0)
++		sprom->itssi_a = simple_strtoul(buf, NULL, 0);
++	sprom->boardflags_lo = 0;
++	if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("boardflags", buf, sizeof(buf)) >= 0)
++		sprom->boardflags_lo = simple_strtoul(buf, NULL, 0);
++	sprom->boardflags_hi = 0;
++	if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("boardflags", buf, sizeof(buf)) >= 0)
++		sprom->boardflags_hi = simple_strtoul(buf, NULL, 0);
++}
++
+ static int bcm47xx_get_invariants(struct ssb_bus *bus,
+ 				   struct ssb_init_invariants *iv)
+ {
+@@ -82,43 +162,19 @@ static int bcm47xx_get_invariants(struct
+ 	/* Fill boardinfo structure */
+ 	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
+ 
+-	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
++	iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
++	if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
+ 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
+-	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
+-		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
+-	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
++	if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
+ 		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
+ 
+-	/* Fill sprom structure */
+-	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
+-	iv->sprom.revision = 3;
+-
+-	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+-		str2eaddr(buf, iv->sprom.et0mac);
+-
+-	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+-		str2eaddr(buf, iv->sprom.et1mac);
+-
+-	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
+-		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
+-
+-	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
+-		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
+-
+-	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
+-		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
+-
+-	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
+-	    nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
+-		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
++	bcm47xx_fill_sprom(&iv->sprom);
++
++	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0 ||
++	    cfe_getenv("cardbus", buf, sizeof(buf)) >= 0)
++		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
+ 
+ 	return 0;
+ }

target/linux/brcm47xx/patches-2.6.35/013-MIPS-BCM47xx-Activate-SSB_B43_PCI_BRIDGE-by-default.patch

@@ -0,0 +1,23 @@
+From b1a0abc936bf61689d1e8a56c423b232cff24da5 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 13:58:09 +0200
+Subject: [PATCH 3/5] MIPS: BCM47xx: Activate SSB_B43_PCI_BRIDGE by default
+
+The b43_pci_bridge is needed to use the b43 driver with brcm47xx.
+Activate it by default if pci is available.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/Kconfig |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -62,6 +62,7 @@ config BCM47XX
+ 	select SSB_DRIVER_MIPS
+ 	select SSB_DRIVER_EXTIF
+ 	select SSB_EMBEDDED
++	select SSB_B43_PCI_BRIDGE if PCI
+ 	select SSB_PCICORE_HOSTMODE if PCI
+ 	select GENERIC_GPIO
+ 	select SYS_HAS_EARLY_PRINTK

target/linux/brcm47xx/patches-2.6.35/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch

@@ -0,0 +1,81 @@
+From 4c6a515310f29c89f25a54a115cde905f97330f8 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 14:59:24 +0200
+Subject: [PATCH 4/5] MIPS: BCM47xx: Setup and register serial early
+
+Swap the first and second serial if console=ttyS1 was set.
+Set it up and register it for early serial support.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/Kconfig         |    1 -
+ arch/mips/bcm47xx/setup.c |   36 +++++++++++++++++++++++++++++++++++-
+ 2 files changed, 35 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -65,7 +65,6 @@ config BCM47XX
+ 	select SSB_B43_PCI_BRIDGE if PCI
+ 	select SSB_PCICORE_HOSTMODE if PCI
+ 	select GENERIC_GPIO
+-	select SYS_HAS_EARLY_PRINTK
+ 	select CFE
+ 	help
+ 	 Support for BCM47XX based boards
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -28,6 +28,8 @@
+ #include <linux/types.h>
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_embedded.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+@@ -181,12 +183,44 @@ static int bcm47xx_get_invariants(struct
+ 
+ void __init plat_mem_setup(void)
+ {
+-	int err;
++	int i, err;
++	char buf[100];
++	struct ssb_mipscore *mcore;
+ 
+ 	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
+ 				      bcm47xx_get_invariants);
+ 	if (err)
+ 		panic("Failed to initialize SSB bus (err %d)\n", err);
++	mcore = &ssb_bcm47xx.mipscore;
++
++	nvram_getenv("kernel_args", buf, sizeof(buf));
++	if (!strncmp(buf, "console=ttyS1", 13)) {
++		struct ssb_serial_port port;
++
++		printk("Swapping serial ports!\n");
++		/* swap serial ports */
++		memcpy(&port, &mcore->serial_ports[0], sizeof(port));
++		memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], sizeof(port));
++		memcpy(&mcore->serial_ports[1], &port, sizeof(port));
++	}
++
++	for (i = 0; i < mcore->nr_serial_ports; i++) {
++		struct ssb_serial_port *port = &(mcore->serial_ports[i]);
++		struct uart_port s;
++
++		memset(&s, 0, sizeof(s));
++		s.line = i;
++		s.mapbase = (unsigned int) port->regs;
++		s.membase = port->regs;
++		s.irq = port->irq + 2;
++		s.uartclk = port->baud_base;
++		s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
++		s.iotype = SERIAL_IO_MEM;
++		s.regshift = port->reg_shift;
++
++		early_serial_setup(&s);
++	}
++	printk("Serial init done.\n");
+ 
+ 	_machine_restart = bcm47xx_machine_restart;
+ 	_machine_halt = bcm47xx_machine_halt;

target/linux/brcm47xx/patches-2.6.35/015-MIPS-BCM47xx-Remove-CFE-console.patch

@@ -0,0 +1,130 @@
+From 6bd2c73ed31a2dfe7eab04d32c17318a5c62f9d4 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 15:11:26 +0200
+Subject: [PATCH 5/5] MIPS: BCM47xx: Remove CFE console
+
+Do not use the CFE console. It causes hangs on some devices like the
+Buffalo WHR-HP-G54.
+This was reported in https://dev.openwrt.org/ticket/4061 and
+https://forum.openwrt.org/viewtopic.php?id=17063
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/prom.c |   82 +++------------------------------------------
+ 1 files changed, 6 insertions(+), 76 deletions(-)
+
+--- a/arch/mips/bcm47xx/prom.c
++++ b/arch/mips/bcm47xx/prom.c
+@@ -31,96 +31,28 @@
+ #include <asm/fw/cfe/cfe_api.h>
+ #include <asm/fw/cfe/cfe_error.h>
+ 
+-static int cfe_cons_handle;
+-
+ const char *get_system_type(void)
+ {
+ 	return "Broadcom BCM47XX";
+ }
+ 
+-void prom_putchar(char c)
+-{
+-	while (cfe_write(cfe_cons_handle, &c, 1) == 0)
+-		;
+-}
+-
+-static __init void prom_init_cfe(void)
++static __init int prom_init_cfe(void)
+ {
+ 	uint32_t cfe_ept;
+ 	uint32_t cfe_handle;
+ 	uint32_t cfe_eptseal;
+-	int argc = fw_arg0;
+-	char **envp = (char **) fw_arg2;
+-	int *prom_vec = (int *) fw_arg3;
+-
+-	/*
+-	 * Check if a loader was used; if NOT, the 4 arguments are
+-	 * what CFE gives us (handle, 0, EPT and EPTSEAL)
+-	 */
+-	if (argc < 0) {
+-		cfe_handle = (uint32_t)argc;
+-		cfe_ept = (uint32_t)envp;
+-		cfe_eptseal = (uint32_t)prom_vec;
+-	} else {
+-		if ((int)prom_vec < 0) {
+-			/*
+-			 * Old loader; all it gives us is the handle,
+-			 * so use the "known" entrypoint and assume
+-			 * the seal.
+-			 */
+-			cfe_handle = (uint32_t)prom_vec;
+-			cfe_ept = 0xBFC00500;
+-			cfe_eptseal = CFE_EPTSEAL;
+-		} else {
+-			/*
+-			 * Newer loaders bundle the handle/ept/eptseal
+-			 * Note: prom_vec is in the loader's useg
+-			 * which is still alive in the TLB.
+-			 */
+-			cfe_handle = prom_vec[0];
+-			cfe_ept = prom_vec[2];
+-			cfe_eptseal = prom_vec[3];
+-		}
+-	}
++
++	cfe_eptseal = (uint32_t) fw_arg3;
++	cfe_handle = (uint32_t) fw_arg0;
++	cfe_ept = (uint32_t) fw_arg2;
+ 
+ 	if (cfe_eptseal != CFE_EPTSEAL) {
+-		/* too early for panic to do any good */
+ 		printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
+-		while (1) ;
++		return -1;
+ 	}
+ 
+ 	cfe_init(cfe_handle, cfe_ept);
+-}
+-
+-static __init void prom_init_console(void)
+-{
+-	/* Initialize CFE console */
+-	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
+-}
+-
+-static __init void prom_init_cmdline(void)
+-{
+-	static char buf[COMMAND_LINE_SIZE] __initdata;
+-
+-	/* Get the kernel command line from CFE */
+-	if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
+-		buf[COMMAND_LINE_SIZE - 1] = 0;
+-		strcpy(arcs_cmdline, buf);
+-	}
+-
+-	/* Force a console handover by adding a console= argument if needed,
+-	 * as CFE is not available anymore later in the boot process. */
+-	if ((strstr(arcs_cmdline, "console=")) == NULL) {
+-		/* Try to read the default serial port used by CFE */
+-		if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
+-		    || (strncmp("uart", buf, 4)))
+-			/* Default to uart0 */
+-			strcpy(buf, "uart0");
+-
+-		/* Compute the new command line */
+-		snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
+-			 arcs_cmdline, buf[4]);
+-	}
++	return 0;
+ }
+ 
+ static __init void prom_init_mem(void)
+@@ -161,8 +93,6 @@ static __init void prom_init_mem(void)
+ void __init prom_init(void)
+ {
+ 	prom_init_cfe();
+-	prom_init_console();
+-	prom_init_cmdline();
+ 	prom_init_mem();
+ }
+ 

target/linux/brcm47xx/patches-2.6.35/021-USB-Add-USB-2.0-to-ssb-ohci-driver.patch

@@ -0,0 +1,95 @@
+From cb33ffbdd8491c58b35958ec74c39b3a5c7fabe8 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 21:25:03 +0200
+Subject: [PATCH 1/2] USB: Add USB 2.0 to ssb ohci driver
+
+This adds USB 2.0 support to ssb ohci driver.
+This work was done based on Braodcom source code in the OpenWRT project.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/ohci-ssb.c |   55 ++++++++++++++++++++++++++++++++++++++++--
+ 1 files changed, 52 insertions(+), 3 deletions(-)
+
+--- a/drivers/usb/host/ohci-ssb.c
++++ b/drivers/usb/host/ohci-ssb.c
+@@ -92,9 +92,12 @@ static const struct hc_driver ssb_ohci_h
+ static void ssb_ohci_detach(struct ssb_device *dev)
+ {
+ 	struct usb_hcd *hcd = ssb_get_drvdata(dev);
++	if (hcd->driver->shutdown)
++		hcd->driver->shutdown(hcd);
+ 
+ 	usb_remove_hcd(hcd);
+ 	iounmap(hcd->regs);
++	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ 	usb_put_hcd(hcd);
+ 	ssb_device_disable(dev, 0);
+ }
+@@ -106,10 +109,55 @@ static int ssb_ohci_attach(struct ssb_de
+ 	int err = -ENOMEM;
+ 	u32 tmp, flags = 0;
+ 
+-	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
+-		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
++	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
++	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
++		return -EOPNOTSUPP;
+ 
+-	ssb_device_enable(dev, flags);
++	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
++		/* Put the device into host-mode. */
++		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
++		ssb_device_enable(dev, flags);
++	} else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
++		/*
++		 * USB 2.0 special considerations:
++		 *
++		 * 1. Since the core supports both ehci and EHCI functions, it must
++		 *    only be reset once.
++		 *
++		 * 2. In addition to the standard SSB reset sequence, the Host Control
++		 *    Register must be programmed to bring the USB core and various
++		 *    phy components out of reset.
++		 */
++		ssb_device_enable(dev, 0);
++		ssb_write32(dev, 0x200, 0x7ff);
++
++		/* Change Flush control reg */
++		tmp = ssb_read32(dev, 0x400);
++		tmp &= ~8;
++		ssb_write32(dev, 0x400, tmp);
++		tmp = ssb_read32(dev, 0x400);
++
++		/* Change Shim control reg */
++		tmp = ssb_read32(dev, 0x304);
++		tmp &= ~0x100;
++		ssb_write32(dev, 0x304, tmp);
++		tmp = ssb_read32(dev, 0x304);
++
++		udelay(1);
++
++		/* Work around for 5354 failures */
++		if ((dev->id.revision == 2) && (dev->bus->chip_id == 0x5354)) {
++			/* Change syn01 reg */
++			tmp = 0x00fe00fe;
++			ssb_write32(dev, 0x894, tmp);
++
++			/* Change syn03 reg */
++			tmp = ssb_read32(dev, 0x89c);
++			tmp |= 0x1;
++			ssb_write32(dev, 0x89c, tmp);
++		}
++	} else
++		ssb_device_enable(dev, 0);
+ 
+ 	hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
+ 			dev_name(dev->dev));
+@@ -200,6 +248,7 @@ static int ssb_ohci_resume(struct ssb_de
+ static const struct ssb_device_id ssb_ohci_table[] = {
+ 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
+ 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
++	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
+ 	SSB_DEVTABLE_END
+ };
+ MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);

target/linux/brcm47xx/patches-2.6.35/022-USB-Add-ehci-ssb-driver.patch

@@ -1,9 +1,17 @@
+From cb269cf1f97c316a5184080814a751687c72b718 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 21:29:40 +0200
+Subject: [PATCH 2/2] USB: Add ehci ssb driver
+
+Support for the Sonics Silicon Backplane (SSB) attached Broadcom USB EHCI core.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 ---
  drivers/usb/host/Kconfig    |   13 ++
- drivers/usb/host/ehci-hcd.c |   12 ++
- drivers/usb/host/ehci-ssb.c |  201 ++++++++++++++++++++++++++++++++++++++++++++
- drivers/usb/host/ohci-ssb.c |   23 +++++
- 4 files changed, 247 insertions(+), 2 deletions(-)
+ drivers/usb/host/ehci-hcd.c |   23 ++++-
+ drivers/usb/host/ehci-ssb.c |  258 +++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 292 insertions(+), 2 deletions(-)
+ create mode 100644 drivers/usb/host/ehci-ssb.c
 
 --- a/drivers/usb/host/Kconfig
 +++ b/drivers/usb/host/Kconfig
@@ -13,7 +21,7 @@
  
 +config USB_EHCI_HCD_SSB
 +	bool "EHCI support for Broadcom SSB EHCI core"
-+	depends on USB_EHCI_HCD && SSB && EXPERIMENTAL
++	depends on USB_EHCI_HCD && (SSB = y || SSB = USB_EHCI_HCD) && EXPERIMENTAL
 +	default n
 +	---help---
 +	  Support for the Sonics Silicon Backplane (SSB) attached
@@ -29,7 +37,7 @@
  	depends on USB
 --- a/drivers/usb/host/ehci-hcd.c
 +++ b/drivers/usb/host/ehci-hcd.c
-@@ -1158,6 +1158,11 @@ MODULE_LICENSE ("GPL");
+@@ -1158,9 +1158,14 @@ MODULE_LICENSE ("GPL");
  #define	PLATFORM_DRIVER		ehci_atmel_driver
  #endif
  
@@ -40,15 +48,53 @@
 +
  #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
      !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
-     !defined(XILINX_OF_PLATFORM_DRIVER)
+-    !defined(XILINX_OF_PLATFORM_DRIVER)
++    !defined(XILINX_OF_PLATFORM_DRIVER) && !defined(SSB_EHCI_DRIVER)
+ #error "missing bus glue for ehci-hcd"
+ #endif
+ 
+@@ -1220,10 +1225,21 @@ static int __init ehci_hcd_init(void)
+ 	if (retval < 0)
+ 		goto clean4;
+ #endif
++
++#ifdef SSB_EHCI_DRIVER
++	retval = ssb_driver_register(&SSB_EHCI_DRIVER);
++	if (retval < 0)
++		goto clean5;
++#endif
++
+ 	return retval;
+ 
++#ifdef SSB_EHCI_DRIVER
++	/* ssb_driver_unregister(&SSB_EHCI_DRIVER); */
++clean5:
++#endif
+ #ifdef XILINX_OF_PLATFORM_DRIVER
+-	/* of_unregister_platform_driver(&XILINX_OF_PLATFORM_DRIVER); */
++	of_unregister_platform_driver(&XILINX_OF_PLATFORM_DRIVER);
+ clean4:
+ #endif
+ #ifdef OF_PLATFORM_DRIVER
+@@ -1254,6 +1270,9 @@ module_init(ehci_hcd_init);
+ 
+ static void __exit ehci_hcd_cleanup(void)
+ {
++#ifdef SSB_EHCI_DRIVER
++	ssb_driver_unregister(&SSB_EHCI_DRIVER);
++#endif
+ #ifdef XILINX_OF_PLATFORM_DRIVER
+ 	of_unregister_platform_driver(&XILINX_OF_PLATFORM_DRIVER);
+ #endif
 --- /dev/null
 +++ b/drivers/usb/host/ehci-ssb.c
-@@ -0,0 +1,158 @@
+@@ -0,0 +1,258 @@
 +/*
 + * Sonics Silicon Backplane
 + * Broadcom USB-core EHCI driver (SSB bus glue)
 + *
 + * Copyright 2007 Steven Brown <sbrown@cortland.com>
++ * Copyright 2010 Hauke Mehrtens <hauke@hauke-m.de>
 + *
 + * Derived from the OHCI-SSB driver
 + * Copyright 2007 Michael Buesch <mb@bu3sch.de>
@@ -69,12 +115,9 @@
 + */
 +#include <linux/ssb/ssb.h>
 +
-+#define SSB_OHCI_TMSLOW_HOSTMODE	(1 << 29)
 +
 +struct ssb_ehci_device {
 +	struct ehci_hcd ehci; /* _must_ be at the beginning. */
-+
-+	u32 enable_flags;
 +};
 +
 +static inline
@@ -134,34 +177,78 @@
 +
 +	.hub_status_data	= ehci_hub_status_data,
 +	.hub_control		= ehci_hub_control,
++#if defined(CONFIG_PM)
 +	.bus_suspend		= ehci_bus_suspend,
 +	.bus_resume		= ehci_bus_resume,
++#endif
 +	.relinquish_port	= ehci_relinquish_port,
 +	.port_handed_over	= ehci_port_handed_over,
 +
 +	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 +};
 +
-+static void ssb_ehci_detach(struct ssb_device *dev, struct usb_hcd *hcd)
++static void ssb_ehci_detach(struct ssb_device *dev)
 +{
++	struct usb_hcd *hcd = ssb_get_drvdata(dev);
 +	if (hcd->driver->shutdown)
 +		hcd->driver->shutdown(hcd);
 +
 +	usb_remove_hcd(hcd);
-+
 +	iounmap(hcd->regs);
 +	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+
 +	usb_put_hcd(hcd);
++	ssb_device_disable(dev, 0);
 +}
-+EXPORT_SYMBOL_GPL(ssb_ehci_detach);
 +
-+static int ssb_ehci_attach(struct ssb_device *dev, struct usb_hcd **ehci_hcd)
++static int ssb_ehci_attach(struct ssb_device *dev)
 +{
 +	struct ssb_ehci_device *ehcidev;
 +	struct usb_hcd *hcd;
 +	int err = -ENOMEM;
-+	u32 tmp, flags = 0;
++	u32 tmp;
++
++	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
++	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
++		return -EOPNOTSUPP;
++
++	/*
++	 * USB 2.0 special considerations:
++	 *
++	 * 1. Since the core supports both ehci and EHCI functions, it must
++	 *    only be reset once.
++	 *
++	 * 2. In addition to the standard SSB reset sequence, the Host Control
++	 *    Register must be programmed to bring the USB core and various
++	 *    phy components out of reset.
++	 */
++	ssb_device_enable(dev, 0);
++	ssb_write32(dev, 0x200, 0x7ff);
++
++	/* Change Flush control reg */
++	tmp = ssb_read32(dev, 0x400);
++	tmp &= ~8;
++	ssb_write32(dev, 0x400, tmp);
++	tmp = ssb_read32(dev, 0x400);
++
++	/* Change Shim control reg */
++	tmp = ssb_read32(dev, 0x304);
++	tmp &= ~0x100;
++	ssb_write32(dev, 0x304, tmp);
++	tmp = ssb_read32(dev, 0x304);
++
++	udelay(1);
++
++	/* Work around for 5354 failures */
++	if ((dev->id.revision == 2) && (dev->bus->chip_id == 0x5354)) {
++		/* Change syn01 reg */
++		tmp = 0x00fe00fe;
++		ssb_write32(dev, 0x894, tmp);
++
++		/* Change syn03 reg */
++		tmp = ssb_read32(dev, 0x89c);
++		tmp |= 0x1;
++		ssb_write32(dev, 0x89c, tmp);
++	}
 +
 +	hcd = usb_create_hcd(&ssb_ehci_hc_driver, dev->dev,
 +			     dev_name(dev->dev));
@@ -169,7 +256,6 @@
 +		goto err_dev_disable;
 +
 +	ehcidev = hcd_to_ssb_ehci(hcd);
-+	ehcidev->enable_flags = flags;
 +	tmp = ssb_read32(dev, SSB_ADMATCH0);
 +	hcd->rsrc_start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
 +	hcd->rsrc_len = 0x100; /* ehci reg block size */
@@ -179,11 +265,11 @@
 +	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
 +	if (!hcd->regs)
 +		goto err_put_hcd;
-+	err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED | IRQF_DISABLED);
++	err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
 +	if (err)
 +		goto err_iounmap;
 +
-+	*ehci_hcd = hcd;
++	ssb_set_drvdata(dev, hcd);
 +
 +	return err;
 +
@@ -192,73 +278,72 @@
 +err_put_hcd:
 +	usb_put_hcd(hcd);
 +err_dev_disable:
-+	ssb_device_disable(dev, flags);
++	ssb_device_disable(dev, 0);
 +	return err;
 +}
-+EXPORT_SYMBOL_GPL(ssb_ehci_attach);
++
++static int ssb_ehci_probe(struct ssb_device *dev,
++		const struct ssb_device_id *id)
++{
++	int err;
++	u16 chipid_top;
++
++	/* USBcores are only connected on embedded devices. */
++	chipid_top = (dev->bus->chip_id & 0xFF00);
++	if (chipid_top != 0x4700 && chipid_top != 0x5300)
++		return -ENODEV;
++
++	/* TODO: Probably need checks here; is the core connected? */
++
++	if (usb_disabled())
++		return -ENODEV;
++
++	err = ssb_ehci_attach(dev);
++
++	return err;
++}
++
++static void ssb_ehci_remove(struct ssb_device *dev)
++{
++	ssb_ehci_detach(dev);
++}
++
++#ifdef CONFIG_PM
++
++static int ssb_ehci_suspend(struct ssb_device *dev, pm_message_t state)
++{
++	ssb_device_disable(dev, 0);
++
++	return 0;
++}
++
++static int ssb_ehci_resume(struct ssb_device *dev)
++{
++	struct usb_hcd *hcd = ssb_get_drvdata(dev);
++	struct ssb_ehci_device *ehcidev = hcd_to_ssb_ehci(hcd);
++
++	ssb_device_enable(dev, 0);
++
++	ehci_finish_controller_resume(hcd);
++	return 0;
++}
++
++#else /* !CONFIG_PM */
++#define ssb_ehci_suspend	NULL
++#define ssb_ehci_resume	NULL
++#endif /* CONFIG_PM */
 +
 +static const struct ssb_device_id ssb_ehci_table[] = {
 +	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
 +	SSB_DEVTABLE_END
 +};
 +MODULE_DEVICE_TABLE(ssb, ssb_ehci_table);
---- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -17,6 +17,8 @@
-  */
- #include <linux/ssb/ssb.h>
- 
-+extern int ssb_ehci_attach(struct ssb_device *dev, struct usb_hcd **hcd);
-+extern void ssb_ehci_detach(struct ssb_device *dev, struct usb_hcd *hcd);
- 
- #define SSB_OHCI_TMSLOW_HOSTMODE	(1 << 29)
- 
-@@ -24,6 +26,7 @@ struct ssb_ohci_device {
- 	struct ohci_hcd ohci; /* _must_ be at the beginning. */
- 
- 	u32 enable_flags;
-+	struct usb_hcd *ehci_hcd;
- };
- 
- static inline
-@@ -92,13 +95,25 @@ static const struct hc_driver ssb_ohci_h
- static void ssb_ohci_detach(struct ssb_device *dev)
- {
- 	struct usb_hcd *hcd = ssb_get_drvdata(dev);
-+#ifdef CONFIG_USB_EHCI_HCD_SSB
-+	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-+#endif
- 
- 	usb_remove_hcd(hcd);
- 	iounmap(hcd->regs);
- 	usb_put_hcd(hcd);
 +
-+#ifdef CONFIG_USB_EHCI_HCD_SSB
-+	/*
-+	 * Also detach ehci function
-+	 */
-+	if (dev->id.coreid == SSB_DEV_USB20_HOST)
-+		ssb_ehci_detach(dev, ohcidev->ehci_hcd);
-+#endif
- 	ssb_device_disable(dev, 0);
- }
- 
-+
- static int ssb_ohci_attach(struct ssb_device *dev)
- {
- 	struct ssb_ohci_device *ohcidev;
-@@ -165,6 +180,14 @@ static int ssb_ohci_attach(struct ssb_de
- 
- 	ssb_set_drvdata(dev, hcd);
- 
-+#ifdef CONFIG_USB_EHCI_HCD_SSB
-+	/*
-+	 * attach ehci function in this core
-+	 */
-+	if (dev->id.coreid == SSB_DEV_USB20_HOST)
-+		err = ssb_ehci_attach(dev, &(ohcidev->ehci_hcd));
-+#endif
-+
- 	return err;
- 
- err_iounmap:
++static struct ssb_driver ssb_ehci_driver = {
++	.name		= KBUILD_MODNAME,
++	.id_table	= ssb_ehci_table,
++	.probe		= ssb_ehci_probe,
++	.remove		= ssb_ehci_remove,
++	.suspend	= ssb_ehci_suspend,
++	.resume		= ssb_ehci_resume,
++};

target/linux/brcm47xx/patches-2.6.35/130-remove_scache.patch

@@ -1,89 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -205,7 +205,6 @@ config MIPS_MALTA
- 	select I8259
- 	select MIPS_BOARDS_GEN
- 	select MIPS_BONITO64
--	select MIPS_CPU_SCACHE
- 	select PCI_GT64XXX_PCI0
- 	select MIPS_MSC
- 	select SWAP_IO_SPACE
-@@ -1589,13 +1588,6 @@ config IP22_CPU_SCACHE
- 	bool
- 	select BOARD_SCACHE
- 
--#
--# Support for a MIPS32 / MIPS64 style S-caches
--#
--config MIPS_CPU_SCACHE
--	bool
--	select BOARD_SCACHE
--
- config R5000_CPU_SCACHE
- 	bool
- 	select BOARD_SCACHE
---- a/arch/mips/kernel/cpu-probe.c
-+++ b/arch/mips/kernel/cpu-probe.c
-@@ -772,6 +772,8 @@ static inline void cpu_probe_mips(struct
- 	case PRID_IMP_25KF:
- 		c->cputype = CPU_25KF;
- 		__cpu_name[cpu] = "MIPS 25Kc";
-+		/* Probe for L2 cache */
-+		c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
- 		break;
- 	case PRID_IMP_34K:
- 		c->cputype = CPU_34K;
---- a/arch/mips/mm/Makefile
-+++ b/arch/mips/mm/Makefile
-@@ -33,6 +33,5 @@ obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= c-oct
- obj-$(CONFIG_IP22_CPU_SCACHE)	+= sc-ip22.o
- obj-$(CONFIG_R5000_CPU_SCACHE)  += sc-r5k.o
- obj-$(CONFIG_RM7000_CPU_SCACHE)	+= sc-rm7k.o
--obj-$(CONFIG_MIPS_CPU_SCACHE)	+= sc-mips.o
- 
- EXTRA_CFLAGS += -Werror
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -1148,7 +1148,6 @@ static void __init loongson2_sc_init(voi
- 
- extern int r5k_sc_init(void);
- extern int rm7k_sc_init(void);
--extern int mips_sc_init(void);
- 
- static void __cpuinit setup_scache(void)
- {
-@@ -1202,29 +1201,17 @@ static void __cpuinit setup_scache(void)
- #endif
- 
- 	default:
--		if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
--		    c->isa_level == MIPS_CPU_ISA_M32R2 ||
--		    c->isa_level == MIPS_CPU_ISA_M64R1 ||
--		    c->isa_level == MIPS_CPU_ISA_M64R2) {
--#ifdef CONFIG_MIPS_CPU_SCACHE
--			if (mips_sc_init ()) {
--				scache_size = c->scache.ways * c->scache.sets * c->scache.linesz;
--				printk("MIPS secondary cache %ldkB, %s, linesize %d bytes.\n",
--				       scache_size >> 10,
--				       way_string[c->scache.ways], c->scache.linesz);
--			}
--#else
--			if (!(c->scache.flags & MIPS_CACHE_NOT_PRESENT))
--				panic("Dunno how to handle MIPS32 / MIPS64 second level cache");
--#endif
--			return;
--		}
- 		sc_present = 0;
- 	}
- 
- 	if (!sc_present)
- 		return;
- 
-+	if ((c->isa_level == MIPS_CPU_ISA_M32R1 ||
-+	     c->isa_level == MIPS_CPU_ISA_M64R1) &&
-+	    !(c->scache.flags & MIPS_CACHE_NOT_PRESENT))
-+		panic("Dunno how to handle MIPS32 / MIPS64 second level cache");
-+
- 	/* compute a couple of other cache variables */
- 	c->scache.waysize = scache_size / c->scache.ways;
- 

target/linux/brcm47xx/patches-2.6.35/150-cpu_fixes.patch

@@ -295,7 +295,7 @@
  	if (dc_lsize)
  		protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
  	if (!cpu_icache_snoops_remote_store && scache_size)
-@@ -1298,6 +1312,17 @@ static void __cpuinit coherency_setup(vo
+@@ -1311,6 +1325,17 @@ static void __cpuinit coherency_setup(vo
  	 * silly idea of putting something else there ...
  	 */
  	switch (current_cpu_type()) {
@@ -313,7 +313,7 @@
  	case CPU_R4000PC:
  	case CPU_R4000SC:
  	case CPU_R4000MC:
-@@ -1354,6 +1379,15 @@ void __cpuinit r4k_cache_init(void)
+@@ -1367,6 +1392,15 @@ void __cpuinit r4k_cache_init(void)
  		break;
  	}
  
@@ -329,7 +329,7 @@
  	probe_pcache();
  	setup_scache();
  
-@@ -1412,5 +1446,13 @@ void __cpuinit r4k_cache_init(void)
+@@ -1425,5 +1459,13 @@ void __cpuinit r4k_cache_init(void)
  #if !defined(CONFIG_MIPS_CMP)
  	local_r4k___flush_cache_all(NULL);
  #endif

target/linux/brcm47xx/patches-2.6.35/210-b44_phy_fix.patch

@@ -1,36 +1,58 @@
 --- a/drivers/net/b44.c
 +++ b/drivers/net/b44.c
-@@ -384,7 +384,7 @@ static void b44_set_flow_ctrl(struct b44
+@@ -381,11 +381,12 @@ static void b44_set_flow_ctrl(struct b44
  	__b44_set_flow_ctrl(bp, pause_enab);
  }
  
 -#ifdef SSB_DRIVER_MIPS
-+#ifdef CONFIG_SSB_DRIVER_MIPS
- extern char *nvram_get(char *name);
+-extern char *nvram_get(char *name);
++#ifdef CONFIG_BCM47XX
++
++#include <asm/mach-bcm47xx/nvram.h>
  static void b44_wap54g10_workaround(struct b44 *bp)
  {
-@@ -421,12 +421,45 @@ static inline void b44_wap54g10_workarou
- }
- #endif
+-	const char *str;
++	char buf[20];
+ 	u32 val;
+ 	int err;
  
-+#ifdef CONFIG_SSB_DRIVER_MIPS
+@@ -394,10 +395,9 @@ static void b44_wap54g10_workaround(stru
+ 	 * see https://dev.openwrt.org/ticket/146
+ 	 * check and reset bit "isolate"
+ 	 */
+-	str = nvram_get("boardnum");
+-	if (!str)
++	if (nvram_getenv("boardnum", buf, sizeof(buf)) > 0)
+ 		return;
+-	if (simple_strtoul(str, NULL, 0) == 2) {
++	if (simple_strtoul(buf, NULL, 0) == 2) {
+ 		err = __b44_readphy(bp, 0, MII_BMCR, &val);
+ 		if (err)
+ 			goto error;
+@@ -412,10 +412,43 @@ static void b44_wap54g10_workaround(stru
+ error:
+ 	pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
+ }
++
 +static inline int startswith (const char *source, const char *cmp) 
 +{ 
 +       return !strncmp(source,cmp,strlen(cmp)); 
 +}
 +
-+#define getvar(str) (nvram_get(str) ? : "")
-+
 +static inline void b44_bcm47xx_workarounds(struct b44 *bp)
 +{
++	char buf[20];
 +	/* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
-+	if (simple_strtoul(getvar("boardnum"), NULL, 0) == 100) {
++	if (nvram_getenv("boardnum", buf, sizeof(buf)) > 0)
++		return;
++	if (simple_strtoul(buf, NULL, 0) == 100) {
 +		bp->phy_addr = B44_PHY_ADDR_NO_PHY;
 +	} else {
 +		/* WL-HDD */
 +		struct ssb_device *sdev = bp->sdev;
-+		if (startswith(getvar("hardware_version"), "WL300-")) 
-+		{
++		if (nvram_getenv("hardware_version", buf, sizeof(buf)) > 0)
++			return;
++		if (startswith(buf, "WL300-")) {
 +			if (sdev->bus->sprom.et0phyaddr == 0 &&
 +			    sdev->bus->sprom.et1phyaddr == 1)
 +				bp->phy_addr = B44_PHY_ADDR_NO_PHY;
@@ -39,15 +61,19 @@
 +	return;
 +}
 +
-+#else
+ #else
++
+ static inline void b44_wap54g10_workaround(struct b44 *bp)
+ {
+ }
++
 +static inline void b44_bcm47xx_workarounds(struct b44 *bp) 
 +{ 
 +}
-+#endif
-+
+ #endif
+ 
  static int b44_setup_phy(struct b44 *bp)
- {
- 	u32 val;
+@@ -424,6 +457,7 @@ static int b44_setup_phy(struct b44 *bp)
  	int err;
  
  	b44_wap54g10_workaround(bp);
@@ -55,7 +81,7 @@
  
  	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
  		return 0;
-@@ -2089,6 +2122,8 @@ static int __devinit b44_get_invariants(
+@@ -2080,6 +2114,8 @@ static int __devinit b44_get_invariants(
  	 * valid PHY address. */
  	bp->phy_addr &= 0x1F;
  

target/linux/brcm47xx/patches-2.6.35/211-b44_timeout_spam.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/b44.c
 +++ b/drivers/net/b44.c
-@@ -191,10 +191,11 @@ static int b44_wait_bit(struct b44 *bp, 
+@@ -188,10 +188,11 @@ static int b44_wait_bit(struct b44 *bp, 
  		udelay(10);
  	}
  	if (i == timeout) {

target/linux/brcm47xx/patches-2.6.35/220-bcm5354.patch

@@ -1,6 +1,6 @@
 --- a/drivers/ssb/driver_chipcommon.c
 +++ b/drivers/ssb/driver_chipcommon.c
-@@ -260,6 +260,8 @@ void ssb_chipco_resume(struct ssb_chipco
+@@ -285,6 +285,8 @@ void ssb_chipco_resume(struct ssb_chipco
  void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
                               u32 *plltype, u32 *n, u32 *m)
  {
@@ -9,7 +9,7 @@
  	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
  	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
  	switch (*plltype) {
-@@ -283,6 +285,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
+@@ -308,6 +310,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
  void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
  				 u32 *plltype, u32 *n, u32 *m)
  {
@@ -31,7 +31,7 @@
  	}
 --- a/drivers/ssb/main.c
 +++ b/drivers/ssb/main.c
-@@ -1073,6 +1073,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+@@ -1075,6 +1075,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
  
  	if (bus->chip_id == 0x5365) {
  		rate = 100000000;

target/linux/brcm47xx/patches-2.6.35/250-ohci-ssb-usb2.patch

@@ -1,60 +0,0 @@
----
- drivers/usb/host/ohci-ssb.c |   39 ++++++++++++++++++++++++++++++++++++---
- 1 file changed, 36 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -106,10 +106,42 @@ static int ssb_ohci_attach(struct ssb_de
- 	int err = -ENOMEM;
- 	u32 tmp, flags = 0;
- 
--	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
-+	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
-+		/* Put the device into host-mode. */
- 		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
--
--	ssb_device_enable(dev, flags);
-+		ssb_device_enable(dev, flags);
-+	} else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-+		/*
-+		 * USB 2.0 special considerations:
-+		 *
-+		 * 1. Since the core supports both OHCI and EHCI functions, it must
-+		 *    only be reset once.
-+		 *
-+		 * 2. In addition to the standard SSB reset sequence, the Host Control
-+		 *    Register must be programmed to bring the USB core and various
-+		 *    phy components out of reset.
-+		 */
-+		ssb_device_enable(dev, 0);
-+		ssb_write32(dev, 0x200, 0x7ff);
-+		udelay(1);
-+		if (dev->id.revision == 1) { // bug in rev 1
-+
-+			/* Change Flush control reg */
-+			tmp = ssb_read32(dev, 0x400);
-+			tmp &= ~8;
-+			ssb_write32(dev, 0x400, tmp);
-+			tmp = ssb_read32(dev, 0x400);
-+			printk("USB20H fcr: 0x%0x\n", tmp);
-+
-+			/* Change Shim control reg */
-+			tmp = ssb_read32(dev, 0x304);
-+			tmp &= ~0x100;
-+			ssb_write32(dev, 0x304, tmp);
-+			tmp = ssb_read32(dev, 0x304);
-+			printk("USB20H shim: 0x%0x\n", tmp);
-+		}
-+	} else
-+		ssb_device_enable(dev, 0);
- 
- 	hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
- 			dev_name(dev->dev));
-@@ -200,6 +232,7 @@ static int ssb_ohci_resume(struct ssb_de
- static const struct ssb_device_id ssb_ohci_table[] = {
- 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
- 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
- 	SSB_DEVTABLE_END
- };
- MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);

target/linux/brcm47xx/patches-2.6.35/260-ohci-set-dma-mask.patch

@@ -1,16 +0,0 @@
----
- drivers/usb/host/ohci-ssb.c |    3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -106,6 +106,9 @@ static int ssb_ohci_attach(struct ssb_de
- 	int err = -ENOMEM;
- 	u32 tmp, flags = 0;
- 
-+	if (ssb_dma_set_mask(dev, DMA_BIT_MASK(32)))
-+		return -EOPNOTSUPP;
-+
- 	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
- 		/* Put the device into host-mode. */
- 		flags |= SSB_OHCI_TMSLOW_HOSTMODE;

target/linux/brcm47xx/patches-2.6.35/275-usb2-bcm5354-init.patch

@@ -1,63 +0,0 @@
-This patch significantly improves the reliability of high speed 
-usb writes on the bcm5354. It implements a work around for version 2
-of the usb20 core that was cribbed from the GPL sources for the 
-Asus wl500gpv2 and verified against the wl520gu sources.
-
-Reference:
-GPL/WL-520gu-NewUI/src/linux/linux/arch/mips/brcm-boards/bcm947xx/pcibios.c
-GPL/WL-500gPV2-NewUI/src/linux/linux/arch/mips/brcm-boards/bcm947xx/pcibios.c
-
-Signed-off-by: Steve Brown <sbrown@cortland.com>
-
----
- drivers/usb/host/ohci-ssb.c |   37 +++++++++++++++++++++++--------------
- 1 file changed, 23 insertions(+), 14 deletions(-)
-
---- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -141,22 +141,31 @@ static int ssb_ohci_attach(struct ssb_de
- 		 */
- 		ssb_device_enable(dev, 0);
- 		ssb_write32(dev, 0x200, 0x7ff);
-+
-+		/* Change Flush control reg */
-+		tmp = ssb_read32(dev, 0x400);
-+		tmp &= ~8;
-+		ssb_write32(dev, 0x400, tmp);
-+		tmp = ssb_read32(dev, 0x400);
-+
-+		/* Change Shim control reg */
-+		tmp = ssb_read32(dev, 0x304);
-+		tmp &= ~0x100;
-+		ssb_write32(dev, 0x304, tmp);
-+		tmp = ssb_read32(dev, 0x304);
-+
- 		udelay(1);
--		if (dev->id.revision == 1) { // bug in rev 1
- 
--			/* Change Flush control reg */
--			tmp = ssb_read32(dev, 0x400);
--			tmp &= ~8;
--			ssb_write32(dev, 0x400, tmp);
--			tmp = ssb_read32(dev, 0x400);
--			printk("USB20H fcr: 0x%0x\n", tmp);
--
--			/* Change Shim control reg */
--			tmp = ssb_read32(dev, 0x304);
--			tmp &= ~0x100;
--			ssb_write32(dev, 0x304, tmp);
--			tmp = ssb_read32(dev, 0x304);
--			printk("USB20H shim: 0x%0x\n", tmp);
-+		/* Work around for 5354 failures */
-+		if ((dev->id.revision == 2) && (dev->bus->chip_id == 0x5354)) {
-+			/* Change syn01 reg */
-+			tmp = 0x00fe00fe;
-+			ssb_write32(dev, 0x894, tmp);
-+
-+			/* Change syn03 reg */
-+			tmp = ssb_read32(dev, 0x89c);
-+			tmp |= 0x1;
-+			ssb_write32(dev, 0x89c, tmp);
- 		}
- 	} else
- 		ssb_device_enable(dev, 0);

target/linux/brcm47xx/patches-2.6.35/301-kmod-fuse-dcache-bug-r4k.patch

@@ -18,7 +18,7 @@
  	unsigned long addr, unsigned long pfn)
  {
  	struct flush_cache_page_args args;
-@@ -1456,3 +1456,10 @@ void __cpuinit r4k_cache_init(void)
+@@ -1469,3 +1469,10 @@ void __cpuinit r4k_cache_init(void)
  	coherency_setup();
  #endif
  }

target/linux/brcm47xx/patches-2.6.35/400-arch-bcm47xx.patch

@@ -1,280 +1,39 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -62,6 +62,7 @@ config BCM47XX
- 	select SSB_DRIVER_MIPS
- 	select SSB_DRIVER_EXTIF
- 	select SSB_EMBEDDED
-+	select SSB_B43_PCI_BRIDGE if PCI
- 	select SSB_PCICORE_HOSTMODE if PCI
- 	select GENERIC_GPIO
- 	select SYS_HAS_EARLY_PRINTK
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -3,4 +3,4 @@
- # under Linux.
- #
- 
--obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o
-+obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
---- a/arch/mips/bcm47xx/irq.c
-+++ b/arch/mips/bcm47xx/irq.c
-@@ -1,5 +1,6 @@
- /*
-  *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
-+ *  Copyright (C) 2008 Michael Buesch <mb@bu3sch.de>
-  *
-  *  This program is free software; you can redistribute  it and/or modify it
-  *  under  the terms of  the GNU General  Public License as published by the
-@@ -23,10 +24,19 @@
-  */
- 
- #include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
-+#include <linux/pci.h>
-+#include <linux/ssb/ssb.h>
-+
- #include <asm/irq_cpu.h>
- 
-+
-+extern struct ssb_bus ssb_bcm47xx;
-+
-+
- void plat_irq_dispatch(void)
- {
- 	u32 cause;
 --- a/arch/mips/bcm47xx/nvram.c
 +++ b/arch/mips/bcm47xx/nvram.c
-@@ -24,10 +24,10 @@
- #include <asm/io.h>
- #include <asm/uaccess.h>
- 
--#include <nvram.h>
-+#include "include/nvram.h"
- 
- #define MB * 1048576
--extern struct ssb_bus ssb;
-+extern struct ssb_bus ssb_bcm47xx;
- 
- static char nvram_buf[NVRAM_SPACE];
- static int cfe_env;
-@@ -36,7 +36,7 @@ extern char *cfe_env_get(char *nv_buf, c
- /* Probe for NVRAM header */
- static void __init early_nvram_init(void)
- {
--	struct ssb_mipscore *mcore = &ssb.mipscore;
-+	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
- 	struct nvram_header *header;
- 	int i;
- 	u32 base, lim, off;
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -2,7 +2,7 @@
-  *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
-  *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
-  *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-- *  Copyright (C) 2006 Michael Buesch <mb@bu3sch.de>
-+ *  Copyright (C) 2006-2008 Michael Buesch <mb@bu3sch.de>
-  *
-  *  This program is free software; you can redistribute  it and/or modify it
-  *  under  the terms of  the GNU General  Public License as published by the
-@@ -25,18 +25,28 @@
-  *  675 Mass Ave, Cambridge, MA 02139, USA.
-  */
- 
-+#include <linux/init.h>
- #include <linux/types.h>
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
-+#include <linux/tty.h>
-+#include <linux/serial.h>
-+#include <linux/serial_core.h>
-+#include <linux/serial_reg.h>
-+#include <linux/serial_8250.h>
- #include <asm/bootinfo.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
--#include <bcm47xx.h>
- #include <asm/fw/cfe/cfe_api.h>
-+#include <linux/pm.h>
-+
-+#include "include/nvram.h"
- 
- struct ssb_bus ssb_bcm47xx;
- EXPORT_SYMBOL(ssb_bcm47xx);
- 
-+extern void bcm47xx_pci_init(void);
-+
- static void bcm47xx_machine_restart(char *command)
- {
- 	printk(KERN_ALERT "Please stand by while rebooting the system...\n");
-@@ -56,7 +66,7 @@ static void bcm47xx_machine_halt(void)
- 		cpu_relax();
+@@ -92,3 +92,30 @@ int nvram_getenv(char *name, char *val, 
+ 	return 1;
  }
- 
--static void str2eaddr(char *str, char *dest)
-+static void e_aton(char *str, char *dest)
- {
- 	int i = 0;
- 
-@@ -73,51 +83,142 @@ static void str2eaddr(char *str, char *d
- 	}
- }
- 
--static int bcm47xx_get_invariants(struct ssb_bus *bus,
--				   struct ssb_init_invariants *iv)
-+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
+ EXPORT_SYMBOL(nvram_getenv);
++
++char *nvram_get(const char *name)
 +{
-+	char *s;
++	char *var, *value, *end, *eq;
 +
-+	memset(sprom, 0xFF, sizeof(struct ssb_sprom));
++	if (!name)
++		return NULL;
 +
-+	sprom->revision = 1;
-+	if ((s = nvram_get("il0macaddr")))
-+		e_aton(s, sprom->il0mac);
-+	if ((s = nvram_get("et0macaddr")))
-+		e_aton(s, sprom->et0mac);
-+	if ((s = nvram_get("et1macaddr")))
-+		e_aton(s, sprom->et1mac);
-+	if ((s = nvram_get("et0phyaddr")))
-+		sprom->et0phyaddr = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("et1phyaddr")))
-+		sprom->et1phyaddr = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("et0mdcport")))
-+		sprom->et0mdcport = !!simple_strtoul(s, NULL, 10);
-+	if ((s = nvram_get("et1mdcport")))
-+		sprom->et1mdcport = !!simple_strtoul(s, NULL, 10);
-+	if ((s = nvram_get("pa0b0")))
-+		sprom->pa0b0 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa0b1")))
-+		sprom->pa0b1 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa0b2")))
-+		sprom->pa0b2 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa1b0")))
-+		sprom->pa1b0 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa1b1")))
-+		sprom->pa1b1 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa1b2")))
-+		sprom->pa1b2 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("wl0gpio0")))
-+		sprom->gpio0 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("wl0gpio1")))
-+		sprom->gpio1 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("wl0gpio2")))
-+		sprom->gpio2 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("wl0gpio3")))
-+		sprom->gpio3 = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa0maxpwr")))
-+		sprom->maxpwr_bg = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa1maxpwr")))
-+		sprom->maxpwr_a = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa0itssit")))
-+		sprom->itssi_bg = simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("pa1itssit")))
-+		sprom->itssi_a = simple_strtoul(s, NULL, 0);
-+	sprom->boardflags_lo = 0;
-+	if ((s = nvram_get("boardflags")))
-+		sprom->boardflags_lo = simple_strtoul(s, NULL, 0);
-+	sprom->boardflags_hi = 0;
-+	if ((s = nvram_get("boardflags2")))
-+		sprom->boardflags_hi = simple_strtoul(s, NULL, 0);
++	if (!nvram_buf[0])
++		early_nvram_init();
++
++	/* Look for name=value and return value */
++	var = &nvram_buf[sizeof(struct nvram_header)];
++	end = nvram_buf + sizeof(nvram_buf) - 2;
++	end[0] = end[1] = '\0';
++	for (; *var; var = value + strlen(value) + 1) {
++		if (!(eq = strchr(var, '=')))
++			break;
++		value = eq + 1;
++		if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
++			return value;
++	}
++
++	return NULL;
 +}
 +
-+static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv)
- {
--	char buf[100];
-+	char *s;
-+
-+	iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
-+	if ((s = nvram_get("boardtype")))
-+		iv->boardinfo.type = (u16)simple_strtoul(s, NULL, 0);
-+	if ((s = nvram_get("boardrev")))
-+		iv->boardinfo.rev = (u16)simple_strtoul(s, NULL, 0);
- 
--	/* Fill boardinfo structure */
--	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
-+	bcm47xx_fill_sprom(&iv->sprom);
- 
--	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0)
--		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
--	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
--		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
--	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
--		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
--
--	/* Fill sprom structure */
--	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
--	iv->sprom.revision = 3;
--
--	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
--		str2eaddr(buf, iv->sprom.et0mac);
--	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
--		str2eaddr(buf, iv->sprom.et1mac);
--	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
--		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10);
--	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
--		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10);
--	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
--		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
--	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
--		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
-+	if ((s = nvram_get("cardbus")))
-+		iv->has_cardbus_slot = !!simple_strtoul(s, NULL, 10);
- 
- 	return 0;
- }
- 
- void __init plat_mem_setup(void)
- {
--	int err;
-+	int i, err;
-+	char *s;
-+	struct ssb_mipscore *mcore;
-+
-+	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, bcm47xx_get_invariants);
-+	if (err) {
-+		const char *msg = "Failed to initialize SSB bus (err %d)\n";
-+		printk(msg, err); /* Make sure the message gets out of the box. */
-+		panic(msg, err);
-+	}
-+	mcore = &ssb_bcm47xx.mipscore;
- 
--	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
--				      bcm47xx_get_invariants);
--	if (err)
--		panic("Failed to initialize SSB bus (err %d)\n", err);
-+	s = nvram_get("kernel_args");
-+	if (s && !strncmp(s, "console=ttyS1", 13)) {
-+		struct ssb_serial_port port;
-+
-+		printk("Swapping serial ports!\n");
-+		/* swap serial ports */
-+		memcpy(&port, &mcore->serial_ports[0], sizeof(port));
-+		memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], sizeof(port));
-+		memcpy(&mcore->serial_ports[1], &port, sizeof(port));
-+	}
-+
-+	for (i = 0; i < mcore->nr_serial_ports; i++) {
-+		struct ssb_serial_port *port = &(mcore->serial_ports[i]);
-+		struct uart_port s;
-+
-+		memset(&s, 0, sizeof(s));
-+		s.line = i;
-+		s.mapbase = (unsigned int) port->regs;
-+		s.membase = port->regs;
-+		s.irq = port->irq + 2;
-+		s.uartclk = port->baud_base;
-+		s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
-+		s.iotype = SERIAL_IO_MEM;
-+		s.regshift = port->reg_shift;
-+
-+		early_serial_setup(&s);
-+	}
-+	printk("Serial init done.\n");
- 
- 	_machine_restart = bcm47xx_machine_restart;
++EXPORT_SYMBOL(nvram_get);
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -226,3 +226,20 @@ void __init plat_mem_setup(void)
  	_machine_halt = bcm47xx_machine_halt;
  	pm_power_off = bcm47xx_machine_halt;
  }
@@ -295,25 +54,3 @@
 +	return 0;
 +}
 +device_initcall(bcm47xx_register_gpiodev);
---- a/arch/mips/bcm47xx/time.c
-+++ b/arch/mips/bcm47xx/time.c
-@@ -22,11 +22,17 @@
-  *  675 Mass Ave, Cambridge, MA 02139, USA.
-  */
- 
--
- #include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/serial_reg.h>
-+#include <linux/interrupt.h>
- #include <linux/ssb/ssb.h>
-+#include <asm/addrspace.h>
-+#include <asm/io.h>
- #include <asm/time.h>
--#include <bcm47xx.h>
-+
-+extern struct ssb_bus ssb_bcm47xx;
- 
- void __init plat_time_init(void)
- {

target/linux/brcm47xx/patches-2.6.35/700-ssb-gigabit-ethernet-driver.patch

@@ -8,7 +8,7 @@
  
  #include <net/checksum.h>
  #include <net/ip.h>
-@@ -471,8 +472,9 @@ static void _tw32_flush(struct tg3 *tp, 
+@@ -494,8 +495,9 @@ static void _tw32_flush(struct tg3 *tp, 
  static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
  {
  	tp->write32_mbox(tp, off, val);
@@ -20,7 +20,7 @@
  		tp->read32_mbox(tp, off);
  }
  
-@@ -482,7 +484,7 @@ static void tg3_write32_tx_mbox(struct t
+@@ -505,7 +507,7 @@ static void tg3_write32_tx_mbox(struct t
  	writel(val, mbox);
  	if (tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG)
  		writel(val, mbox);
@@ -29,7 +29,7 @@
  		readl(mbox);
  }
  
-@@ -783,7 +785,7 @@ static void tg3_switch_clocks(struct tg3
+@@ -807,7 +809,7 @@ static void tg3_switch_clocks(struct tg3
  
  #define PHY_BUSY_LOOPS	5000
  
@@ -38,7 +38,7 @@
  {
  	u32 frame_val;
  	unsigned int loops;
-@@ -797,7 +799,7 @@ static int tg3_readphy(struct tg3 *tp, i
+@@ -821,7 +823,7 @@ static int tg3_readphy(struct tg3 *tp, i
  
  	*val = 0x0;
  
@@ -47,7 +47,7 @@
  		      MI_COM_PHY_ADDR_MASK);
  	frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
  		      MI_COM_REG_ADDR_MASK);
-@@ -832,7 +834,12 @@ static int tg3_readphy(struct tg3 *tp, i
+@@ -856,7 +858,12 @@ static int tg3_readphy(struct tg3 *tp, i
  	return ret;
  }
  
@@ -61,7 +61,7 @@
  {
  	u32 frame_val;
  	unsigned int loops;
-@@ -848,7 +855,7 @@ static int tg3_writephy(struct tg3 *tp, 
+@@ -872,7 +879,7 @@ static int tg3_writephy(struct tg3 *tp, 
  		udelay(80);
  	}
  
@@ -70,7 +70,7 @@
  		      MI_COM_PHY_ADDR_MASK);
  	frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
  		      MI_COM_REG_ADDR_MASK);
-@@ -881,6 +888,11 @@ static int tg3_writephy(struct tg3 *tp, 
+@@ -905,6 +912,11 @@ static int tg3_writephy(struct tg3 *tp, 
  	return ret;
  }
  
@@ -82,7 +82,7 @@
  static int tg3_bmcr_reset(struct tg3 *tp)
  {
  	u32 phy_control;
-@@ -2389,6 +2401,9 @@ static int tg3_nvram_read(struct tg3 *tp
+@@ -2411,6 +2423,9 @@ static int tg3_nvram_read(struct tg3 *tp
  {
  	int ret;
  
@@ -92,7 +92,7 @@
  	if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
  		return tg3_nvram_read_using_eeprom(tp, offset, val);
  
-@@ -2720,8 +2735,10 @@ static int tg3_set_power_state(struct tg
+@@ -2742,8 +2757,10 @@ static int tg3_set_power_state(struct tg
  	tg3_frob_aux_power(tp);
  
  	/* Workaround for unstable PLL clock */
@@ -105,7 +105,7 @@
  		u32 val = tr32(0x7d00);
  
  		val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
-@@ -3214,6 +3231,14 @@ relink:
+@@ -3236,6 +3253,14 @@ relink:
  
  		tg3_phy_copper_begin(tp);
  
@@ -120,7 +120,7 @@
  		tg3_readphy(tp, MII_BMSR, &tmp);
  		if (!tg3_readphy(tp, MII_BMSR, &tmp) &&
  		    (tmp & BMSR_LSTATUS))
-@@ -6675,6 +6700,11 @@ static int tg3_poll_fw(struct tg3 *tp)
+@@ -6719,6 +6744,11 @@ static int tg3_poll_fw(struct tg3 *tp)
  	int i;
  	u32 val;
  
@@ -132,7 +132,7 @@
  	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
  		/* Wait up to 20ms for init done. */
  		for (i = 0; i < 200; i++) {
-@@ -6958,6 +6988,14 @@ static int tg3_chip_reset(struct tg3 *tp
+@@ -7002,6 +7032,14 @@ static int tg3_chip_reset(struct tg3 *tp
  		tw32(0x5000, 0x400);
  	}
  
@@ -147,7 +147,7 @@
  	tw32(GRC_MODE, tp->grc_mode);
  
  	if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
-@@ -7135,9 +7173,12 @@ static int tg3_halt_cpu(struct tg3 *tp, 
+@@ -7179,9 +7217,12 @@ static int tg3_halt_cpu(struct tg3 *tp, 
  		return -ENODEV;
  	}
  
@@ -163,7 +163,7 @@
  	return 0;
  }
  
-@@ -7199,6 +7240,11 @@ static int tg3_load_5701_a0_firmware_fix
+@@ -7244,6 +7285,11 @@ static int tg3_load_5701_a0_firmware_fix
  	const __be32 *fw_data;
  	int err, i;
  
@@ -175,7 +175,7 @@
  	fw_data = (void *)tp->fw->data;
  
  	/* Firmware blob starts with version numbers, followed by
-@@ -7256,6 +7302,11 @@ static int tg3_load_tso_firmware(struct 
+@@ -7302,6 +7348,11 @@ static int tg3_load_tso_firmware(struct 
  	unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
  	int err, i;
  
@@ -187,7 +187,7 @@
  	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
  		return 0;
  
-@@ -8380,6 +8431,11 @@ static void tg3_timer(unsigned long __op
+@@ -8446,6 +8497,11 @@ static void tg3_timer(unsigned long __op
  
  	spin_lock(&tp->lock);
  
@@ -199,7 +199,7 @@
  	if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
  		/* All of this garbage is because when using non-tagged
  		 * IRQ status the mailbox/status_block protocol the chip
-@@ -10279,6 +10335,11 @@ static int tg3_test_nvram(struct tg3 *tp
+@@ -10113,6 +10169,11 @@ static int tg3_test_nvram(struct tg3 *tp
  	if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
  		return 0;
  
@@ -211,7 +211,7 @@
  	if (tg3_nvram_read(tp, 0, &magic) != 0)
  		return -EIO;
  
-@@ -11098,7 +11159,7 @@ static int tg3_ioctl(struct net_device *
+@@ -10932,7 +10993,7 @@ static int tg3_ioctl(struct net_device *
  			return -EAGAIN;
  
  		spin_lock_bh(&tp->lock);
@@ -220,7 +220,7 @@
  		spin_unlock_bh(&tp->lock);
  
  		data->val_out = mii_regval;
-@@ -11114,7 +11175,7 @@ static int tg3_ioctl(struct net_device *
+@@ -10948,7 +11009,7 @@ static int tg3_ioctl(struct net_device *
  			return -EAGAIN;
  
  		spin_lock_bh(&tp->lock);
@@ -229,7 +229,7 @@
  		spin_unlock_bh(&tp->lock);
  
  		return err;
-@@ -11759,6 +11820,12 @@ static void __devinit tg3_get_5717_nvram
+@@ -11593,6 +11654,12 @@ static void __devinit tg3_get_5717_nvram
  /* Chips other than 5700/5701 use the NVRAM for fetching info. */
  static void __devinit tg3_nvram_init(struct tg3 *tp)
  {
@@ -242,7 +242,7 @@
  	tw32_f(GRC_EEPROM_ADDR,
  	     (EEPROM_ADDR_FSM_RESET |
  	      (EEPROM_DEFAULT_CLOCK_PERIOD <<
-@@ -12020,6 +12087,9 @@ static int tg3_nvram_write_block(struct 
+@@ -11855,6 +11922,9 @@ static int tg3_nvram_write_block(struct 
  {
  	int ret;
  
@@ -252,7 +252,7 @@
  	if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
  		tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
  		       ~GRC_LCLCTRL_GPIO_OUTPUT1);
-@@ -13360,6 +13430,11 @@ static int __devinit tg3_get_invariants(
+@@ -13227,6 +13297,11 @@ static int __devinit tg3_get_invariants(
  	      GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
  		tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
  
@@ -264,7 +264,7 @@
  	/* Get eeprom hw config before calling tg3_set_power_state().
  	 * In particular, the TG3_FLG2_IS_NIC flag must be
  	 * determined before calling tg3_set_power_state() so that
-@@ -13753,6 +13828,10 @@ static int __devinit tg3_get_device_addr
+@@ -13624,6 +13699,10 @@ static int __devinit tg3_get_device_addr
  	}
  
  	if (!is_valid_ether_addr(&dev->dev_addr[0])) {
@@ -275,7 +275,7 @@
  #ifdef CONFIG_SPARC
  		if (!tg3_get_default_macaddr_sparc(tp))
  			return 0;
-@@ -14272,6 +14351,7 @@ static char * __devinit tg3_phy_string(s
+@@ -14144,6 +14223,7 @@ static char * __devinit tg3_phy_string(s
  	case TG3_PHY_ID_BCM5704:	return "5704";
  	case TG3_PHY_ID_BCM5705:	return "5705";
  	case TG3_PHY_ID_BCM5750:	return "5750";
@@ -283,7 +283,7 @@
  	case TG3_PHY_ID_BCM5752:	return "5752";
  	case TG3_PHY_ID_BCM5714:	return "5714";
  	case TG3_PHY_ID_BCM5780:	return "5780";
-@@ -14481,6 +14561,13 @@ static int __devinit tg3_init_one(struct
+@@ -14354,6 +14434,13 @@ static int __devinit tg3_init_one(struct
  		tp->msg_enable = tg3_debug;
  	else
  		tp->msg_enable = TG3_DEF_MSG_ENABLE;
@@ -309,7 +309,7 @@
  
  #define NIC_SRAM_RX_MINI_BUFFER_DESC	0x00001000
  
-@@ -2930,6 +2933,7 @@ struct tg3 {
+@@ -2931,6 +2934,7 @@ struct tg3 {
  #define TG3_PHY_ID_BCM5704		0x60008190
  #define TG3_PHY_ID_BCM5705		0x600081a0
  #define TG3_PHY_ID_BCM5750		0x60008180
@@ -317,7 +317,7 @@
  #define TG3_PHY_ID_BCM5752		0x60008100
  #define TG3_PHY_ID_BCM5714		0x60008340
  #define TG3_PHY_ID_BCM5780		0x60008350
-@@ -2964,7 +2968,8 @@ struct tg3 {
+@@ -2965,7 +2969,8 @@ struct tg3 {
  	 (X) == TG3_PHY_ID_BCM5755 || (X) == TG3_PHY_ID_BCM5756 || \
  	 (X) == TG3_PHY_ID_BCM5906 || (X) == TG3_PHY_ID_BCM5761 || \
  	 (X) == TG3_PHY_ID_BCM5718C || (X) == TG3_PHY_ID_BCM5718S || \

target/linux/brcm47xx/patches-2.6.35/800-fix_cfe_detection.patch

@@ -1,108 +0,0 @@
---- a/arch/mips/bcm47xx/prom.c
-+++ b/arch/mips/bcm47xx/prom.c
-@@ -32,6 +32,7 @@
- #include <asm/fw/cfe/cfe_error.h>
- 
- static int cfe_cons_handle;
-+static void (* __prom_putchar)(char c);
- 
- const char *get_system_type(void)
- {
-@@ -40,65 +41,40 @@ const char *get_system_type(void)
- 
- void prom_putchar(char c)
- {
-+	if (__prom_putchar)
-+		__prom_putchar(c);
-+}
-+
-+void prom_putchar_cfe(char c)
-+{
- 	while (cfe_write(cfe_cons_handle, &c, 1) == 0)
- 		;
- }
- 
--static __init void prom_init_cfe(void)
-+static __init int prom_init_cfe(void)
- {
- 	uint32_t cfe_ept;
- 	uint32_t cfe_handle;
- 	uint32_t cfe_eptseal;
--	int argc = fw_arg0;
--	char **envp = (char **) fw_arg2;
--	int *prom_vec = (int *) fw_arg3;
--
--	/*
--	 * Check if a loader was used; if NOT, the 4 arguments are
--	 * what CFE gives us (handle, 0, EPT and EPTSEAL)
--	 */
--	if (argc < 0) {
--		cfe_handle = (uint32_t)argc;
--		cfe_ept = (uint32_t)envp;
--		cfe_eptseal = (uint32_t)prom_vec;
--	} else {
--		if ((int)prom_vec < 0) {
--			/*
--			 * Old loader; all it gives us is the handle,
--			 * so use the "known" entrypoint and assume
--			 * the seal.
--			 */
--			cfe_handle = (uint32_t)prom_vec;
--			cfe_ept = 0xBFC00500;
--			cfe_eptseal = CFE_EPTSEAL;
--		} else {
--			/*
--			 * Newer loaders bundle the handle/ept/eptseal
--			 * Note: prom_vec is in the loader's useg
--			 * which is still alive in the TLB.
--			 */
--			cfe_handle = prom_vec[0];
--			cfe_ept = prom_vec[2];
--			cfe_eptseal = prom_vec[3];
--		}
--	}
- 
--	if (cfe_eptseal != CFE_EPTSEAL) {
--		/* too early for panic to do any good */
--		printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
--		while (1) ;
--	}
-+	cfe_eptseal = (uint32_t) fw_arg3;
-+	cfe_handle = (uint32_t) fw_arg0;
-+	cfe_ept = (uint32_t) fw_arg2;
-+
-+	if (cfe_eptseal != CFE_EPTSEAL)
-+		return -1;
- 
- 	cfe_init(cfe_handle, cfe_ept);
-+	return 0;
- }
- 
--static __init void prom_init_console(void)
-+static __init void prom_init_console_cfe(void)
- {
- 	/* Initialize CFE console */
- 	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
- }
- 
--static __init void prom_init_cmdline(void)
-+static __init void prom_init_cmdline_cfe(void)
- {
- 	static char buf[COMMAND_LINE_SIZE] __initdata;
- 
-@@ -160,9 +136,12 @@ static __init void prom_init_mem(void)
- 
- void __init prom_init(void)
- {
--	prom_init_cfe();
--	prom_init_console();
--	prom_init_cmdline();
-+	if (prom_init_cfe() == 0) {
-+		//prom_init_console_cfe();
-+		//prom_init_cmdline_cfe();
-+		__prom_putchar = prom_putchar_cfe;
-+	}
-+
- 	prom_init_mem();
- }
- 

target/linux/brcm47xx/patches-2.6.35/812-disable_wgt634u_crap.patch

@@ -4,8 +4,8 @@
  # under Linux.
  #
  
--obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
-+obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
+-obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
++obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
 --- a/arch/mips/bcm47xx/wgt634u.c
 +++ /dev/null
 @@ -1,166 +0,0 @@

target/linux/brcm47xx/patches-2.6.35/900-disable_early_printk.patch

@@ -1,10 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -65,7 +65,6 @@ config BCM47XX
- 	select SSB_B43_PCI_BRIDGE if PCI
- 	select SSB_PCICORE_HOSTMODE if PCI
- 	select GENERIC_GPIO
--	select SYS_HAS_EARLY_PRINTK
- 	select CFE
- 	help
- 	 Support for BCM47XX based boards

target/linux/brcm47xx/patches-2.6.35/940-bcm47xx-yenta.patch

@@ -1,6 +1,6 @@
 --- a/drivers/pcmcia/yenta_socket.c
 +++ b/drivers/pcmcia/yenta_socket.c
-@@ -924,6 +924,8 @@ static unsigned int yenta_probe_irq(stru
+@@ -922,6 +922,8 @@ static unsigned int yenta_probe_irq(stru
  	 * Probe for usable interrupts using the force
  	 * register to generate bogus card status events.
  	 */
@@ -9,7 +9,7 @@
  	cb_writel(socket, CB_SOCKET_EVENT, -1);
  	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
  	reg = exca_readb(socket, I365_CSCINT);
-@@ -939,6 +941,7 @@ static unsigned int yenta_probe_irq(stru
+@@ -937,6 +939,7 @@ static unsigned int yenta_probe_irq(stru
  	}
  	cb_writel(socket, CB_SOCKET_MASK, 0);
  	exca_writeb(socket, I365_CSCINT, reg);
@@ -17,7 +17,7 @@
  
  	mask = probe_irq_mask(val) & 0xffff;
  
-@@ -1022,6 +1025,10 @@ static void yenta_get_socket_capabilitie
+@@ -1021,6 +1024,10 @@ static void yenta_get_socket_capabilitie
  	else
  		socket->socket.irq_mask = 0;
  
@@ -28,7 +28,7 @@
  	dev_printk(KERN_INFO, &socket->dev->dev,
  		   "ISA IRQ mask 0x%04x, PCI irq %d\n",
  		   socket->socket.irq_mask, socket->cb_irq);
-@@ -1260,6 +1267,15 @@ static int __devinit yenta_probe(struct 
+@@ -1259,6 +1266,15 @@ static int __devinit yenta_probe(struct 
  	dev_printk(KERN_INFO, &dev->dev,
  		   "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
  

target/linux/brcm47xx/patches-2.6.35/999-wl_exports.patch

@@ -1,16 +1,15 @@
 --- a/arch/mips/bcm47xx/nvram.c
 +++ b/arch/mips/bcm47xx/nvram.c
-@@ -29,7 +29,9 @@
- #define MB * 1048576
- extern struct ssb_bus ssb_bcm47xx;
+@@ -20,7 +20,8 @@
+ #include <asm/mach-bcm47xx/nvram.h>
+ #include <asm/mach-bcm47xx/bcm47xx.h>
  
 -static char nvram_buf[NVRAM_SPACE];
 +char nvram_buf[NVRAM_SPACE];
 +EXPORT_SYMBOL(nvram_buf);
-+
- static int cfe_env;
- extern char *cfe_env_get(char *nv_buf, const char *name);
  
+ /* Probe for NVRAM header */
+ static void __init early_nvram_init(void)
 --- a/arch/mips/mm/cache.c
 +++ b/arch/mips/mm/cache.c
 @@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s

target/linux/generic/patches-2.6.34/975-ssb_update.patch

@@ -1,15 +1,380 @@
+--- a/drivers/net/b44.c
++++ b/drivers/net/b44.c
+@@ -135,7 +135,6 @@ static void b44_init_rings(struct b44 *)
+ 
+ static void b44_init_hw(struct b44 *, int);
+ 
+-static int dma_desc_align_mask;
+ static int dma_desc_sync_size;
+ static int instance;
+ 
+@@ -150,9 +149,8 @@ static inline void b44_sync_dma_desc_for
+ 						unsigned long offset,
+ 						enum dma_data_direction dir)
+ {
+-	ssb_dma_sync_single_range_for_device(sdev, dma_base,
+-					     offset & dma_desc_align_mask,
+-					     dma_desc_sync_size, dir);
++	dma_sync_single_for_device(sdev->dma_dev, dma_base + offset,
++				   dma_desc_sync_size, dir);
+ }
+ 
+ static inline void b44_sync_dma_desc_for_cpu(struct ssb_device *sdev,
+@@ -160,9 +158,8 @@ static inline void b44_sync_dma_desc_for
+ 					     unsigned long offset,
+ 					     enum dma_data_direction dir)
+ {
+-	ssb_dma_sync_single_range_for_cpu(sdev, dma_base,
+-					  offset & dma_desc_align_mask,
+-					  dma_desc_sync_size, dir);
++	dma_sync_single_for_cpu(sdev->dma_dev, dma_base + offset,
++				dma_desc_sync_size, dir);
+ }
+ 
+ static inline unsigned long br32(const struct b44 *bp, unsigned long reg)
+@@ -608,10 +605,10 @@ static void b44_tx(struct b44 *bp)
+ 
+ 		BUG_ON(skb == NULL);
+ 
+-		ssb_dma_unmap_single(bp->sdev,
+-				     rp->mapping,
+-				     skb->len,
+-				     DMA_TO_DEVICE);
++		dma_unmap_single(bp->sdev->dma_dev,
++				 rp->mapping,
++				 skb->len,
++				 DMA_TO_DEVICE);
+ 		rp->skb = NULL;
+ 		dev_kfree_skb_irq(skb);
+ 	}
+@@ -648,29 +645,29 @@ static int b44_alloc_rx_skb(struct b44 *
+ 	if (skb == NULL)
+ 		return -ENOMEM;
+ 
+-	mapping = ssb_dma_map_single(bp->sdev, skb->data,
+-				     RX_PKT_BUF_SZ,
+-				     DMA_FROM_DEVICE);
++	mapping = dma_map_single(bp->sdev->dma_dev, skb->data,
++				 RX_PKT_BUF_SZ,
++				 DMA_FROM_DEVICE);
+ 
+ 	/* Hardware bug work-around, the chip is unable to do PCI DMA
+ 	   to/from anything above 1GB :-( */
+-	if (ssb_dma_mapping_error(bp->sdev, mapping) ||
++	if (dma_mapping_error(bp->sdev->dma_dev, mapping) ||
+ 		mapping + RX_PKT_BUF_SZ > DMA_BIT_MASK(30)) {
+ 		/* Sigh... */
+-		if (!ssb_dma_mapping_error(bp->sdev, mapping))
+-			ssb_dma_unmap_single(bp->sdev, mapping,
++		if (!dma_mapping_error(bp->sdev->dma_dev, mapping))
++			dma_unmap_single(bp->sdev->dma_dev, mapping,
+ 					     RX_PKT_BUF_SZ, DMA_FROM_DEVICE);
+ 		dev_kfree_skb_any(skb);
+ 		skb = __netdev_alloc_skb(bp->dev, RX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA);
+ 		if (skb == NULL)
+ 			return -ENOMEM;
+-		mapping = ssb_dma_map_single(bp->sdev, skb->data,
+-					     RX_PKT_BUF_SZ,
+-					     DMA_FROM_DEVICE);
+-		if (ssb_dma_mapping_error(bp->sdev, mapping) ||
+-			mapping + RX_PKT_BUF_SZ > DMA_BIT_MASK(30)) {
+-			if (!ssb_dma_mapping_error(bp->sdev, mapping))
+-				ssb_dma_unmap_single(bp->sdev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE);
++		mapping = dma_map_single(bp->sdev->dma_dev, skb->data,
++					 RX_PKT_BUF_SZ,
++					 DMA_FROM_DEVICE);
++		if (dma_mapping_error(bp->sdev->dma_dev, mapping) ||
++		    mapping + RX_PKT_BUF_SZ > DMA_BIT_MASK(30)) {
++			if (!dma_mapping_error(bp->sdev->dma_dev, mapping))
++				dma_unmap_single(bp->sdev->dma_dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE);
+ 			dev_kfree_skb_any(skb);
+ 			return -ENOMEM;
+ 		}
+@@ -745,9 +742,9 @@ static void b44_recycle_rx(struct b44 *b
+ 					     dest_idx * sizeof(*dest_desc),
+ 					     DMA_BIDIRECTIONAL);
+ 
+-	ssb_dma_sync_single_for_device(bp->sdev, dest_map->mapping,
+-				       RX_PKT_BUF_SZ,
+-				       DMA_FROM_DEVICE);
++	dma_sync_single_for_device(bp->sdev->dma_dev, dest_map->mapping,
++				   RX_PKT_BUF_SZ,
++				   DMA_FROM_DEVICE);
+ }
+ 
+ static int b44_rx(struct b44 *bp, int budget)
+@@ -767,9 +764,9 @@ static int b44_rx(struct b44 *bp, int bu
+ 		struct rx_header *rh;
+ 		u16 len;
+ 
+-		ssb_dma_sync_single_for_cpu(bp->sdev, map,
+-					    RX_PKT_BUF_SZ,
+-					    DMA_FROM_DEVICE);
++		dma_sync_single_for_cpu(bp->sdev->dma_dev, map,
++					RX_PKT_BUF_SZ,
++					DMA_FROM_DEVICE);
+ 		rh = (struct rx_header *) skb->data;
+ 		len = le16_to_cpu(rh->len);
+ 		if ((len > (RX_PKT_BUF_SZ - RX_PKT_OFFSET)) ||
+@@ -801,8 +798,8 @@ static int b44_rx(struct b44 *bp, int bu
+ 			skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod);
+ 			if (skb_size < 0)
+ 				goto drop_it;
+-			ssb_dma_unmap_single(bp->sdev, map,
+-					     skb_size, DMA_FROM_DEVICE);
++			dma_unmap_single(bp->sdev->dma_dev, map,
++					 skb_size, DMA_FROM_DEVICE);
+ 			/* Leave out rx_header */
+ 			skb_put(skb, len + RX_PKT_OFFSET);
+ 			skb_pull(skb, RX_PKT_OFFSET);
+@@ -954,24 +951,24 @@ static netdev_tx_t b44_start_xmit(struct
+ 		goto err_out;
+ 	}
+ 
+-	mapping = ssb_dma_map_single(bp->sdev, skb->data, len, DMA_TO_DEVICE);
+-	if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_BIT_MASK(30)) {
++	mapping = dma_map_single(bp->sdev->dma_dev, skb->data, len, DMA_TO_DEVICE);
++	if (dma_mapping_error(bp->sdev->dma_dev, mapping) || mapping + len > DMA_BIT_MASK(30)) {
+ 		struct sk_buff *bounce_skb;
+ 
+ 		/* Chip can't handle DMA to/from >1GB, use bounce buffer */
+-		if (!ssb_dma_mapping_error(bp->sdev, mapping))
+-			ssb_dma_unmap_single(bp->sdev, mapping, len,
++		if (!dma_mapping_error(bp->sdev->dma_dev, mapping))
++			dma_unmap_single(bp->sdev->dma_dev, mapping, len,
+ 					     DMA_TO_DEVICE);
+ 
+ 		bounce_skb = __netdev_alloc_skb(dev, len, GFP_ATOMIC | GFP_DMA);
+ 		if (!bounce_skb)
+ 			goto err_out;
+ 
+-		mapping = ssb_dma_map_single(bp->sdev, bounce_skb->data,
+-					     len, DMA_TO_DEVICE);
+-		if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_BIT_MASK(30)) {
+-			if (!ssb_dma_mapping_error(bp->sdev, mapping))
+-				ssb_dma_unmap_single(bp->sdev, mapping,
++		mapping = dma_map_single(bp->sdev->dma_dev, bounce_skb->data,
++					 len, DMA_TO_DEVICE);
++		if (dma_mapping_error(bp->sdev->dma_dev, mapping) || mapping + len > DMA_BIT_MASK(30)) {
++			if (!dma_mapping_error(bp->sdev->dma_dev, mapping))
++				dma_unmap_single(bp->sdev->dma_dev, mapping,
+ 						     len, DMA_TO_DEVICE);
+ 			dev_kfree_skb_any(bounce_skb);
+ 			goto err_out;
+@@ -1014,8 +1011,6 @@ static netdev_tx_t b44_start_xmit(struct
+ 	if (TX_BUFFS_AVAIL(bp) < 1)
+ 		netif_stop_queue(dev);
+ 
+-	dev->trans_start = jiffies;
+-
+ out_unlock:
+ 	spin_unlock_irqrestore(&bp->lock, flags);
+ 
+@@ -1070,8 +1065,8 @@ static void b44_free_rings(struct b44 *b
+ 
+ 		if (rp->skb == NULL)
+ 			continue;
+-		ssb_dma_unmap_single(bp->sdev, rp->mapping, RX_PKT_BUF_SZ,
+-				     DMA_FROM_DEVICE);
++		dma_unmap_single(bp->sdev->dma_dev, rp->mapping, RX_PKT_BUF_SZ,
++				 DMA_FROM_DEVICE);
+ 		dev_kfree_skb_any(rp->skb);
+ 		rp->skb = NULL;
+ 	}
+@@ -1082,8 +1077,8 @@ static void b44_free_rings(struct b44 *b
+ 
+ 		if (rp->skb == NULL)
+ 			continue;
+-		ssb_dma_unmap_single(bp->sdev, rp->mapping, rp->skb->len,
+-				     DMA_TO_DEVICE);
++		dma_unmap_single(bp->sdev->dma_dev, rp->mapping, rp->skb->len,
++				 DMA_TO_DEVICE);
+ 		dev_kfree_skb_any(rp->skb);
+ 		rp->skb = NULL;
+ 	}
+@@ -1105,14 +1100,12 @@ static void b44_init_rings(struct b44 *b
+ 	memset(bp->tx_ring, 0, B44_TX_RING_BYTES);
+ 
+ 	if (bp->flags & B44_FLAG_RX_RING_HACK)
+-		ssb_dma_sync_single_for_device(bp->sdev, bp->rx_ring_dma,
+-					       DMA_TABLE_BYTES,
+-					       DMA_BIDIRECTIONAL);
++		dma_sync_single_for_device(bp->sdev->dma_dev, bp->rx_ring_dma,
++					   DMA_TABLE_BYTES, DMA_BIDIRECTIONAL);
+ 
+ 	if (bp->flags & B44_FLAG_TX_RING_HACK)
+-		ssb_dma_sync_single_for_device(bp->sdev, bp->tx_ring_dma,
+-					       DMA_TABLE_BYTES,
+-					       DMA_TO_DEVICE);
++		dma_sync_single_for_device(bp->sdev->dma_dev, bp->tx_ring_dma,
++					   DMA_TABLE_BYTES, DMA_TO_DEVICE);
+ 
+ 	for (i = 0; i < bp->rx_pending; i++) {
+ 		if (b44_alloc_rx_skb(bp, -1, i) < 0)
+@@ -1132,27 +1125,23 @@ static void b44_free_consistent(struct b
+ 	bp->tx_buffers = NULL;
+ 	if (bp->rx_ring) {
+ 		if (bp->flags & B44_FLAG_RX_RING_HACK) {
+-			ssb_dma_unmap_single(bp->sdev, bp->rx_ring_dma,
+-					     DMA_TABLE_BYTES,
+-					     DMA_BIDIRECTIONAL);
++			dma_unmap_single(bp->sdev->dma_dev, bp->rx_ring_dma,
++					 DMA_TABLE_BYTES, DMA_BIDIRECTIONAL);
+ 			kfree(bp->rx_ring);
+ 		} else
+-			ssb_dma_free_consistent(bp->sdev, DMA_TABLE_BYTES,
+-						bp->rx_ring, bp->rx_ring_dma,
+-						GFP_KERNEL);
++			dma_free_coherent(bp->sdev->dma_dev, DMA_TABLE_BYTES,
++					  bp->rx_ring, bp->rx_ring_dma);
+ 		bp->rx_ring = NULL;
+ 		bp->flags &= ~B44_FLAG_RX_RING_HACK;
+ 	}
+ 	if (bp->tx_ring) {
+ 		if (bp->flags & B44_FLAG_TX_RING_HACK) {
+-			ssb_dma_unmap_single(bp->sdev, bp->tx_ring_dma,
+-					     DMA_TABLE_BYTES,
+-					     DMA_TO_DEVICE);
++			dma_unmap_single(bp->sdev->dma_dev, bp->tx_ring_dma,
++					 DMA_TABLE_BYTES, DMA_TO_DEVICE);
+ 			kfree(bp->tx_ring);
+ 		} else
+-			ssb_dma_free_consistent(bp->sdev, DMA_TABLE_BYTES,
+-						bp->tx_ring, bp->tx_ring_dma,
+-						GFP_KERNEL);
++			dma_free_coherent(bp->sdev->dma_dev, DMA_TABLE_BYTES,
++					  bp->tx_ring, bp->tx_ring_dma);
+ 		bp->tx_ring = NULL;
+ 		bp->flags &= ~B44_FLAG_TX_RING_HACK;
+ 	}
+@@ -1177,7 +1166,8 @@ static int b44_alloc_consistent(struct b
+ 		goto out_err;
+ 
+ 	size = DMA_TABLE_BYTES;
+-	bp->rx_ring = ssb_dma_alloc_consistent(bp->sdev, size, &bp->rx_ring_dma, gfp);
++	bp->rx_ring = dma_alloc_coherent(bp->sdev->dma_dev, size,
++					 &bp->rx_ring_dma, gfp);
+ 	if (!bp->rx_ring) {
+ 		/* Allocation may have failed due to pci_alloc_consistent
+ 		   insisting on use of GFP_DMA, which is more restrictive
+@@ -1189,11 +1179,11 @@ static int b44_alloc_consistent(struct b
+ 		if (!rx_ring)
+ 			goto out_err;
+ 
+-		rx_ring_dma = ssb_dma_map_single(bp->sdev, rx_ring,
+-						 DMA_TABLE_BYTES,
+-						 DMA_BIDIRECTIONAL);
++		rx_ring_dma = dma_map_single(bp->sdev->dma_dev, rx_ring,
++					     DMA_TABLE_BYTES,
++					     DMA_BIDIRECTIONAL);
+ 
+-		if (ssb_dma_mapping_error(bp->sdev, rx_ring_dma) ||
++		if (dma_mapping_error(bp->sdev->dma_dev, rx_ring_dma) ||
+ 			rx_ring_dma + size > DMA_BIT_MASK(30)) {
+ 			kfree(rx_ring);
+ 			goto out_err;
+@@ -1204,7 +1194,8 @@ static int b44_alloc_consistent(struct b
+ 		bp->flags |= B44_FLAG_RX_RING_HACK;
+ 	}
+ 
+-	bp->tx_ring = ssb_dma_alloc_consistent(bp->sdev, size, &bp->tx_ring_dma, gfp);
++	bp->tx_ring = dma_alloc_coherent(bp->sdev->dma_dev, size,
++					 &bp->tx_ring_dma, gfp);
+ 	if (!bp->tx_ring) {
+ 		/* Allocation may have failed due to ssb_dma_alloc_consistent
+ 		   insisting on use of GFP_DMA, which is more restrictive
+@@ -1216,11 +1207,11 @@ static int b44_alloc_consistent(struct b
+ 		if (!tx_ring)
+ 			goto out_err;
+ 
+-		tx_ring_dma = ssb_dma_map_single(bp->sdev, tx_ring,
+-			                    DMA_TABLE_BYTES,
+-			                    DMA_TO_DEVICE);
++		tx_ring_dma = dma_map_single(bp->sdev->dma_dev, tx_ring,
++					     DMA_TABLE_BYTES,
++					     DMA_TO_DEVICE);
+ 
+-		if (ssb_dma_mapping_error(bp->sdev, tx_ring_dma) ||
++		if (dma_mapping_error(bp->sdev->dma_dev, tx_ring_dma) ||
+ 			tx_ring_dma + size > DMA_BIT_MASK(30)) {
+ 			kfree(tx_ring);
+ 			goto out_err;
+@@ -2178,12 +2169,14 @@ static int __devinit b44_init_one(struct
+ 			"Failed to powerup the bus\n");
+ 		goto err_out_free_dev;
+ 	}
+-	err = ssb_dma_set_mask(sdev, DMA_BIT_MASK(30));
+-	if (err) {
++
++	if (dma_set_mask(sdev->dma_dev, DMA_BIT_MASK(30)) ||
++	    dma_set_coherent_mask(sdev->dma_dev, DMA_BIT_MASK(30))) {
+ 		dev_err(sdev->dev,
+ 			"Required 30BIT DMA mask unsupported by the system\n");
+ 		goto err_out_powerdown;
+ 	}
++
+ 	err = b44_get_invariants(bp);
+ 	if (err) {
+ 		dev_err(sdev->dev,
+@@ -2346,7 +2339,6 @@ static int __init b44_init(void)
+ 	int err;
+ 
+ 	/* Setup paramaters for syncing RX/TX DMA descriptors */
+-	dma_desc_align_mask = ~(dma_desc_align_size - 1);
+ 	dma_desc_sync_size = max_t(unsigned int, dma_desc_align_size, sizeof(struct dma_desc));
+ 
+ 	err = b44_pci_init();
 --- a/drivers/ssb/driver_chipcommon.c
 +++ b/drivers/ssb/driver_chipcommon.c
-@@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chip
+@@ -209,6 +209,24 @@ static void chipco_powercontrol_init(str
+ 	}
+ }
+ 
++/* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */
++static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc)
++{
++	struct ssb_bus *bus = cc->dev->bus;
++
++	switch (bus->chip_id) {
++	case 0x4312:
++	case 0x4322:
++	case 0x4328:
++		return 7000;
++	case 0x4325:
++		/* TODO: */
++	default:
++		return 15000;
++	}
++}
++
++/* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */
+ static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
+ {
+ 	struct ssb_bus *bus = cc->dev->bus;
+@@ -218,6 +236,12 @@ static void calc_fast_powerup_delay(stru
+ 
+ 	if (bus->bustype != SSB_BUSTYPE_PCI)
+ 		return;
++
++	if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
++		cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc);
++		return;
++	}
++
+ 	if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
+ 		return;
+ 
+@@ -233,6 +257,9 @@ void ssb_chipcommon_init(struct ssb_chip
  {
  	if (!cc->dev)
  		return; /* We don't have a ChipCommon */
 +	if (cc->dev->id.revision >= 11)
 +		cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
++	ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
  	ssb_pmu_init(cc);
  	chipco_powercontrol_init(cc);
  	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
-@@ -370,6 +372,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
+@@ -370,6 +397,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
  {
  	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
  }
@@ -17,9 +382,66 @@
  
  u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
  {
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -502,9 +502,9 @@ static void ssb_pmu_resources_init(struc
+ 		chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
+ }
+ 
++/* http://bcm-v4.sipsolutions.net/802.11/SSB/PmuInit */
+ void ssb_pmu_init(struct ssb_chipcommon *cc)
+ {
+-	struct ssb_bus *bus = cc->dev->bus;
+ 	u32 pmucap;
+ 
+ 	if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
+@@ -516,15 +516,12 @@ void ssb_pmu_init(struct ssb_chipcommon 
+ 	ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
+ 		    cc->pmu.rev, pmucap);
+ 
+-	if (cc->pmu.rev >= 1) {
+-		if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
+-			chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+-				      ~SSB_CHIPCO_PMU_CTL_NOILPONW);
+-		} else {
+-			chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
+-				     SSB_CHIPCO_PMU_CTL_NOILPONW);
+-		}
+-	}
++	if (cc->pmu.rev == 1)
++		chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
++			      ~SSB_CHIPCO_PMU_CTL_NOILPONW);
++	else
++		chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
++			     SSB_CHIPCO_PMU_CTL_NOILPONW);
+ 	ssb_pmu_pll_init(cc);
+ 	ssb_pmu_resources_init(cc);
+ }
 --- a/drivers/ssb/main.c
 +++ b/drivers/ssb/main.c
-@@ -834,6 +834,9 @@ int ssb_bus_pcibus_register(struct ssb_b
+@@ -486,11 +486,12 @@ static int ssb_devices_register(struct s
+ #ifdef CONFIG_SSB_PCIHOST
+ 			sdev->irq = bus->host_pci->irq;
+ 			dev->parent = &bus->host_pci->dev;
++			sdev->dma_dev = dev->parent;
+ #endif
+ 			break;
+ 		case SSB_BUSTYPE_PCMCIA:
+ #ifdef CONFIG_SSB_PCMCIAHOST
+-			sdev->irq = bus->host_pcmcia->irq.AssignedIRQ;
++			sdev->irq = bus->host_pcmcia->irq;
+ 			dev->parent = &bus->host_pcmcia->dev;
+ #endif
+ 			break;
+@@ -501,6 +502,7 @@ static int ssb_devices_register(struct s
+ 			break;
+ 		case SSB_BUSTYPE_SSB:
+ 			dev->dma_mask = &dev->coherent_dma_mask;
++			sdev->dma_dev = dev;
+ 			break;
+ 		}
+ 
+@@ -834,6 +836,9 @@ int ssb_bus_pcibus_register(struct ssb_b
  	if (!err) {
  		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
  			   "PCI device %s\n", dev_name(&host_pci->dev));
@@ -29,6 +451,87 @@
  	}
  
  	return err;
+@@ -1223,80 +1228,6 @@ u32 ssb_dma_translation(struct ssb_devic
+ }
+ EXPORT_SYMBOL(ssb_dma_translation);
+ 
+-int ssb_dma_set_mask(struct ssb_device *dev, u64 mask)
+-{
+-#ifdef CONFIG_SSB_PCIHOST
+-	int err;
+-#endif
+-
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		err = pci_set_dma_mask(dev->bus->host_pci, mask);
+-		if (err)
+-			return err;
+-		err = pci_set_consistent_dma_mask(dev->bus->host_pci, mask);
+-		return err;
+-#endif
+-	case SSB_BUSTYPE_SSB:
+-		return dma_set_mask(dev->dev, mask);
+-	default:
+-		__ssb_dma_not_implemented(dev);
+-	}
+-	return -ENOSYS;
+-}
+-EXPORT_SYMBOL(ssb_dma_set_mask);
+-
+-void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
+-				dma_addr_t *dma_handle, gfp_t gfp_flags)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		if (gfp_flags & GFP_DMA) {
+-			/* Workaround: The PCI API does not support passing
+-			 * a GFP flag. */
+-			return dma_alloc_coherent(&dev->bus->host_pci->dev,
+-						  size, dma_handle, gfp_flags);
+-		}
+-		return pci_alloc_consistent(dev->bus->host_pci, size, dma_handle);
+-#endif
+-	case SSB_BUSTYPE_SSB:
+-		return dma_alloc_coherent(dev->dev, size, dma_handle, gfp_flags);
+-	default:
+-		__ssb_dma_not_implemented(dev);
+-	}
+-	return NULL;
+-}
+-EXPORT_SYMBOL(ssb_dma_alloc_consistent);
+-
+-void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
+-			     void *vaddr, dma_addr_t dma_handle,
+-			     gfp_t gfp_flags)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		if (gfp_flags & GFP_DMA) {
+-			/* Workaround: The PCI API does not support passing
+-			 * a GFP flag. */
+-			dma_free_coherent(&dev->bus->host_pci->dev,
+-					  size, vaddr, dma_handle);
+-			return;
+-		}
+-		pci_free_consistent(dev->bus->host_pci, size,
+-				    vaddr, dma_handle);
+-		return;
+-#endif
+-	case SSB_BUSTYPE_SSB:
+-		dma_free_coherent(dev->dev, size, vaddr, dma_handle);
+-		return;
+-	default:
+-		__ssb_dma_not_implemented(dev);
+-	}
+-}
+-EXPORT_SYMBOL(ssb_dma_free_consistent);
+-
+ int ssb_bus_may_powerdown(struct ssb_bus *bus)
+ {
+ 	struct ssb_chipcommon *cc;
 --- a/drivers/ssb/pci.c
 +++ b/drivers/ssb/pci.c
 @@ -168,7 +168,7 @@ err_pci:
@@ -58,7 +561,7 @@
  		mmiowb();
  		msleep(20);
  	}
-@@ -621,6 +621,14 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -621,6 +621,28 @@ static int ssb_pci_sprom_get(struct ssb_
  	int err = -ENOMEM;
  	u16 *buf;
  
@@ -66,16 +569,30 @@
 +		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
 +		return -ENODEV;
 +	}
-+
-+	bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ?
-+		SSB_SPROM_BASE1 : SSB_SPROM_BASE31;
++	if (bus->chipco.dev) {	/* can be unavailible! */
++		/*
++		 * get SPROM offset: SSB_SPROM_BASE1 except for
++		 * chipcommon rev >= 31 or chip ID is 0x4312 and
++		 * chipcommon status & 3 == 2
++		 */
++		if (bus->chipco.dev->id.revision >= 31)
++			bus->sprom_offset = SSB_SPROM_BASE31;
++		else if (bus->chip_id == 0x4312 &&
++			 (bus->chipco.status & 0x03) == 2)
++			bus->sprom_offset = SSB_SPROM_BASE31;
++		else
++			bus->sprom_offset = SSB_SPROM_BASE1;
++	} else {
++		bus->sprom_offset = SSB_SPROM_BASE1;
++	}
++	ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
 +
  	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
  	if (!buf)
  		goto out;
 --- a/drivers/ssb/sprom.c
 +++ b/drivers/ssb/sprom.c
-@@ -176,3 +176,17 @@ const struct ssb_sprom *ssb_get_fallback
+@@ -176,3 +176,18 @@ const struct ssb_sprom *ssb_get_fallback
  {
  	return fallback_sprom;
  }
@@ -88,6 +605,7 @@
 +	/* this routine differs from specs as we do not access SPROM directly
 +	   on PCMCIA */
 +	if (bus->bustype == SSB_BUSTYPE_PCI &&
++	    bus->chipco.dev &&	/* can be unavailible! */
 +	    bus->chipco.dev->id.revision >= 31)
 +		return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
 +
@@ -95,6 +613,15 @@
 +}
 --- a/include/linux/ssb/ssb.h
 +++ b/include/linux/ssb/ssb.h
+@@ -167,7 +167,7 @@ struct ssb_device {
+ 	 * is an optimization. */
+ 	const struct ssb_bus_ops *ops;
+ 
+-	struct device *dev;
++	struct device *dev, *dma_dev;
+ 
+ 	struct ssb_bus *bus;
+ 	struct ssb_device_id id;
 @@ -305,6 +305,7 @@ struct ssb_bus {
  	/* ID information about the Chip. */
  	u16 chip_id;
@@ -113,6 +640,177 @@
  /* Set a fallback SPROM.
   * See kdoc at the function definition for complete documentation. */
  extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
+@@ -466,14 +470,6 @@ extern u32 ssb_dma_translation(struct ss
+ #define SSB_DMA_TRANSLATION_MASK	0xC0000000
+ #define SSB_DMA_TRANSLATION_SHIFT	30
+ 
+-extern int ssb_dma_set_mask(struct ssb_device *dev, u64 mask);
+-
+-extern void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
+-				       dma_addr_t *dma_handle, gfp_t gfp_flags);
+-extern void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
+-				    void *vaddr, dma_addr_t dma_handle,
+-				    gfp_t gfp_flags);
+-
+ static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev)
+ {
+ #ifdef CONFIG_SSB_DEBUG
+@@ -482,155 +478,6 @@ static inline void __cold __ssb_dma_not_
+ #endif /* DEBUG */
+ }
+ 
+-static inline int ssb_dma_mapping_error(struct ssb_device *dev, dma_addr_t addr)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		return pci_dma_mapping_error(dev->bus->host_pci, addr);
+-#endif
+-		break;
+-	case SSB_BUSTYPE_SSB:
+-		return dma_mapping_error(dev->dev, addr);
+-	default:
+-		break;
+-	}
+-	__ssb_dma_not_implemented(dev);
+-	return -ENOSYS;
+-}
+-
+-static inline dma_addr_t ssb_dma_map_single(struct ssb_device *dev, void *p,
+-					    size_t size, enum dma_data_direction dir)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		return pci_map_single(dev->bus->host_pci, p, size, dir);
+-#endif
+-		break;
+-	case SSB_BUSTYPE_SSB:
+-		return dma_map_single(dev->dev, p, size, dir);
+-	default:
+-		break;
+-	}
+-	__ssb_dma_not_implemented(dev);
+-	return 0;
+-}
+-
+-static inline void ssb_dma_unmap_single(struct ssb_device *dev, dma_addr_t dma_addr,
+-					size_t size, enum dma_data_direction dir)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		pci_unmap_single(dev->bus->host_pci, dma_addr, size, dir);
+-		return;
+-#endif
+-		break;
+-	case SSB_BUSTYPE_SSB:
+-		dma_unmap_single(dev->dev, dma_addr, size, dir);
+-		return;
+-	default:
+-		break;
+-	}
+-	__ssb_dma_not_implemented(dev);
+-}
+-
+-static inline void ssb_dma_sync_single_for_cpu(struct ssb_device *dev,
+-					       dma_addr_t dma_addr,
+-					       size_t size,
+-					       enum dma_data_direction dir)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr,
+-					    size, dir);
+-		return;
+-#endif
+-		break;
+-	case SSB_BUSTYPE_SSB:
+-		dma_sync_single_for_cpu(dev->dev, dma_addr, size, dir);
+-		return;
+-	default:
+-		break;
+-	}
+-	__ssb_dma_not_implemented(dev);
+-}
+-
+-static inline void ssb_dma_sync_single_for_device(struct ssb_device *dev,
+-						  dma_addr_t dma_addr,
+-						  size_t size,
+-						  enum dma_data_direction dir)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr,
+-					       size, dir);
+-		return;
+-#endif
+-		break;
+-	case SSB_BUSTYPE_SSB:
+-		dma_sync_single_for_device(dev->dev, dma_addr, size, dir);
+-		return;
+-	default:
+-		break;
+-	}
+-	__ssb_dma_not_implemented(dev);
+-}
+-
+-static inline void ssb_dma_sync_single_range_for_cpu(struct ssb_device *dev,
+-						     dma_addr_t dma_addr,
+-						     unsigned long offset,
+-						     size_t size,
+-						     enum dma_data_direction dir)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		/* Just sync everything. That's all the PCI API can do. */
+-		pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr,
+-					    offset + size, dir);
+-		return;
+-#endif
+-		break;
+-	case SSB_BUSTYPE_SSB:
+-		dma_sync_single_range_for_cpu(dev->dev, dma_addr, offset,
+-					      size, dir);
+-		return;
+-	default:
+-		break;
+-	}
+-	__ssb_dma_not_implemented(dev);
+-}
+-
+-static inline void ssb_dma_sync_single_range_for_device(struct ssb_device *dev,
+-							dma_addr_t dma_addr,
+-							unsigned long offset,
+-							size_t size,
+-							enum dma_data_direction dir)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		/* Just sync everything. That's all the PCI API can do. */
+-		pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr,
+-					       offset + size, dir);
+-		return;
+-#endif
+-		break;
+-	case SSB_BUSTYPE_SSB:
+-		dma_sync_single_range_for_device(dev->dev, dma_addr, offset,
+-						 size, dir);
+-		return;
+-	default:
+-		break;
+-	}
+-	__ssb_dma_not_implemented(dev);
+-}
+-
+-
+ #ifdef CONFIG_SSB_PCIHOST
+ /* PCI-host wrapper driver */
+ extern int ssb_pcihost_register(struct pci_driver *driver);
 --- a/include/linux/ssb/ssb_driver_chipcommon.h
 +++ b/include/linux/ssb/ssb_driver_chipcommon.h
 @@ -53,6 +53,7 @@

target/linux/generic/patches-2.6.34/976-ssb_add_dma_dev.patch

@@ -1,52 +0,0 @@
-From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
-
-Add dma_dev, a pointer to struct device, to struct ssb_device.  We pass it
-to the generic DMA API with SSB_BUSTYPE_PCI and SSB_BUSTYPE_SSB. 
-ssb_devices_register() sets up it properly.
-
-This is preparation for replacing the ssb bus specific DMA API (ssb_dma_*)
-with the generic DMA API.
-
-Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
-Acked-by: Michael Buesch <mb@bu3sch.de>
-Cc: Gary Zambrano <zambrano@broadcom.com>
-Cc: Stefano Brivio <stefano.brivio@polimi.it>
-Cc: Larry Finger <Larry.Finger@lwfinger.net>
-Cc: John W. Linville <linville@tuxdriver.com>
-Acked-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
----
-
- drivers/ssb/main.c      |    2 ++
- include/linux/ssb/ssb.h |    2 +-
- 2 files changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -486,6 +486,7 @@ static int ssb_devices_register(struct s
- #ifdef CONFIG_SSB_PCIHOST
- 			sdev->irq = bus->host_pci->irq;
- 			dev->parent = &bus->host_pci->dev;
-+			sdev->dma_dev = dev->parent;
- #endif
- 			break;
- 		case SSB_BUSTYPE_PCMCIA:
-@@ -501,6 +502,7 @@ static int ssb_devices_register(struct s
- 			break;
- 		case SSB_BUSTYPE_SSB:
- 			dev->dma_mask = &dev->coherent_dma_mask;
-+			sdev->dma_dev = dev;
- 			break;
- 		}
- 
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -167,7 +167,7 @@ struct ssb_device {
- 	 * is an optimization. */
- 	const struct ssb_bus_ops *ops;
- 
--	struct device *dev;
-+	struct device *dev, *dma_dev;
- 
- 	struct ssb_bus *bus;
- 	struct ssb_device_id id;

target/linux/generic/patches-2.6.35/975-ssb_update.patch

@@ -0,0 +1,708 @@
+--- a/drivers/net/b44.c
++++ b/drivers/net/b44.c
+@@ -135,7 +135,6 @@ static void b44_init_rings(struct b44 *)
+ 
+ static void b44_init_hw(struct b44 *, int);
+ 
+-static int dma_desc_align_mask;
+ static int dma_desc_sync_size;
+ static int instance;
+ 
+@@ -150,9 +149,8 @@ static inline void b44_sync_dma_desc_for
+ 						unsigned long offset,
+ 						enum dma_data_direction dir)
+ {
+-	ssb_dma_sync_single_range_for_device(sdev, dma_base,
+-					     offset & dma_desc_align_mask,
+-					     dma_desc_sync_size, dir);
++	dma_sync_single_for_device(sdev->dma_dev, dma_base + offset,
++				   dma_desc_sync_size, dir);
+ }
+ 
+ static inline void b44_sync_dma_desc_for_cpu(struct ssb_device *sdev,
+@@ -160,9 +158,8 @@ static inline void b44_sync_dma_desc_for
+ 					     unsigned long offset,
+ 					     enum dma_data_direction dir)
+ {
+-	ssb_dma_sync_single_range_for_cpu(sdev, dma_base,
+-					  offset & dma_desc_align_mask,
+-					  dma_desc_sync_size, dir);
++	dma_sync_single_for_cpu(sdev->dma_dev, dma_base + offset,
++				dma_desc_sync_size, dir);
+ }
+ 
+ static inline unsigned long br32(const struct b44 *bp, unsigned long reg)
+@@ -608,10 +605,10 @@ static void b44_tx(struct b44 *bp)
+ 
+ 		BUG_ON(skb == NULL);
+ 
+-		ssb_dma_unmap_single(bp->sdev,
+-				     rp->mapping,
+-				     skb->len,
+-				     DMA_TO_DEVICE);
++		dma_unmap_single(bp->sdev->dma_dev,
++				 rp->mapping,
++				 skb->len,
++				 DMA_TO_DEVICE);
+ 		rp->skb = NULL;
+ 		dev_kfree_skb_irq(skb);
+ 	}
+@@ -648,29 +645,29 @@ static int b44_alloc_rx_skb(struct b44 *
+ 	if (skb == NULL)
+ 		return -ENOMEM;
+ 
+-	mapping = ssb_dma_map_single(bp->sdev, skb->data,
+-				     RX_PKT_BUF_SZ,
+-				     DMA_FROM_DEVICE);
++	mapping = dma_map_single(bp->sdev->dma_dev, skb->data,
++				 RX_PKT_BUF_SZ,
++				 DMA_FROM_DEVICE);
+ 
+ 	/* Hardware bug work-around, the chip is unable to do PCI DMA
+ 	   to/from anything above 1GB :-( */
+-	if (ssb_dma_mapping_error(bp->sdev, mapping) ||
++	if (dma_mapping_error(bp->sdev->dma_dev, mapping) ||
+ 		mapping + RX_PKT_BUF_SZ > DMA_BIT_MASK(30)) {
+ 		/* Sigh... */
+-		if (!ssb_dma_mapping_error(bp->sdev, mapping))
+-			ssb_dma_unmap_single(bp->sdev, mapping,
++		if (!dma_mapping_error(bp->sdev->dma_dev, mapping))
++			dma_unmap_single(bp->sdev->dma_dev, mapping,
+ 					     RX_PKT_BUF_SZ, DMA_FROM_DEVICE);
+ 		dev_kfree_skb_any(skb);
+ 		skb = __netdev_alloc_skb(bp->dev, RX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA);
+ 		if (skb == NULL)
+ 			return -ENOMEM;
+-		mapping = ssb_dma_map_single(bp->sdev, skb->data,
+-					     RX_PKT_BUF_SZ,
+-					     DMA_FROM_DEVICE);
+-		if (ssb_dma_mapping_error(bp->sdev, mapping) ||
+-			mapping + RX_PKT_BUF_SZ > DMA_BIT_MASK(30)) {
+-			if (!ssb_dma_mapping_error(bp->sdev, mapping))
+-				ssb_dma_unmap_single(bp->sdev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE);
++		mapping = dma_map_single(bp->sdev->dma_dev, skb->data,
++					 RX_PKT_BUF_SZ,
++					 DMA_FROM_DEVICE);
++		if (dma_mapping_error(bp->sdev->dma_dev, mapping) ||
++		    mapping + RX_PKT_BUF_SZ > DMA_BIT_MASK(30)) {
++			if (!dma_mapping_error(bp->sdev->dma_dev, mapping))
++				dma_unmap_single(bp->sdev->dma_dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE);
+ 			dev_kfree_skb_any(skb);
+ 			return -ENOMEM;
+ 		}
+@@ -745,9 +742,9 @@ static void b44_recycle_rx(struct b44 *b
+ 					     dest_idx * sizeof(*dest_desc),
+ 					     DMA_BIDIRECTIONAL);
+ 
+-	ssb_dma_sync_single_for_device(bp->sdev, dest_map->mapping,
+-				       RX_PKT_BUF_SZ,
+-				       DMA_FROM_DEVICE);
++	dma_sync_single_for_device(bp->sdev->dma_dev, dest_map->mapping,
++				   RX_PKT_BUF_SZ,
++				   DMA_FROM_DEVICE);
+ }
+ 
+ static int b44_rx(struct b44 *bp, int budget)
+@@ -767,9 +764,9 @@ static int b44_rx(struct b44 *bp, int bu
+ 		struct rx_header *rh;
+ 		u16 len;
+ 
+-		ssb_dma_sync_single_for_cpu(bp->sdev, map,
+-					    RX_PKT_BUF_SZ,
+-					    DMA_FROM_DEVICE);
++		dma_sync_single_for_cpu(bp->sdev->dma_dev, map,
++					RX_PKT_BUF_SZ,
++					DMA_FROM_DEVICE);
+ 		rh = (struct rx_header *) skb->data;
+ 		len = le16_to_cpu(rh->len);
+ 		if ((len > (RX_PKT_BUF_SZ - RX_PKT_OFFSET)) ||
+@@ -801,8 +798,8 @@ static int b44_rx(struct b44 *bp, int bu
+ 			skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod);
+ 			if (skb_size < 0)
+ 				goto drop_it;
+-			ssb_dma_unmap_single(bp->sdev, map,
+-					     skb_size, DMA_FROM_DEVICE);
++			dma_unmap_single(bp->sdev->dma_dev, map,
++					 skb_size, DMA_FROM_DEVICE);
+ 			/* Leave out rx_header */
+ 			skb_put(skb, len + RX_PKT_OFFSET);
+ 			skb_pull(skb, RX_PKT_OFFSET);
+@@ -954,24 +951,24 @@ static netdev_tx_t b44_start_xmit(struct
+ 		goto err_out;
+ 	}
+ 
+-	mapping = ssb_dma_map_single(bp->sdev, skb->data, len, DMA_TO_DEVICE);
+-	if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_BIT_MASK(30)) {
++	mapping = dma_map_single(bp->sdev->dma_dev, skb->data, len, DMA_TO_DEVICE);
++	if (dma_mapping_error(bp->sdev->dma_dev, mapping) || mapping + len > DMA_BIT_MASK(30)) {
+ 		struct sk_buff *bounce_skb;
+ 
+ 		/* Chip can't handle DMA to/from >1GB, use bounce buffer */
+-		if (!ssb_dma_mapping_error(bp->sdev, mapping))
+-			ssb_dma_unmap_single(bp->sdev, mapping, len,
++		if (!dma_mapping_error(bp->sdev->dma_dev, mapping))
++			dma_unmap_single(bp->sdev->dma_dev, mapping, len,
+ 					     DMA_TO_DEVICE);
+ 
+ 		bounce_skb = __netdev_alloc_skb(dev, len, GFP_ATOMIC | GFP_DMA);
+ 		if (!bounce_skb)
+ 			goto err_out;
+ 
+-		mapping = ssb_dma_map_single(bp->sdev, bounce_skb->data,
+-					     len, DMA_TO_DEVICE);
+-		if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_BIT_MASK(30)) {
+-			if (!ssb_dma_mapping_error(bp->sdev, mapping))
+-				ssb_dma_unmap_single(bp->sdev, mapping,
++		mapping = dma_map_single(bp->sdev->dma_dev, bounce_skb->data,
++					 len, DMA_TO_DEVICE);
++		if (dma_mapping_error(bp->sdev->dma_dev, mapping) || mapping + len > DMA_BIT_MASK(30)) {
++			if (!dma_mapping_error(bp->sdev->dma_dev, mapping))
++				dma_unmap_single(bp->sdev->dma_dev, mapping,
+ 						     len, DMA_TO_DEVICE);
+ 			dev_kfree_skb_any(bounce_skb);
+ 			goto err_out;
+@@ -1068,8 +1065,8 @@ static void b44_free_rings(struct b44 *b
+ 
+ 		if (rp->skb == NULL)
+ 			continue;
+-		ssb_dma_unmap_single(bp->sdev, rp->mapping, RX_PKT_BUF_SZ,
+-				     DMA_FROM_DEVICE);
++		dma_unmap_single(bp->sdev->dma_dev, rp->mapping, RX_PKT_BUF_SZ,
++				 DMA_FROM_DEVICE);
+ 		dev_kfree_skb_any(rp->skb);
+ 		rp->skb = NULL;
+ 	}
+@@ -1080,8 +1077,8 @@ static void b44_free_rings(struct b44 *b
+ 
+ 		if (rp->skb == NULL)
+ 			continue;
+-		ssb_dma_unmap_single(bp->sdev, rp->mapping, rp->skb->len,
+-				     DMA_TO_DEVICE);
++		dma_unmap_single(bp->sdev->dma_dev, rp->mapping, rp->skb->len,
++				 DMA_TO_DEVICE);
+ 		dev_kfree_skb_any(rp->skb);
+ 		rp->skb = NULL;
+ 	}
+@@ -1103,14 +1100,12 @@ static void b44_init_rings(struct b44 *b
+ 	memset(bp->tx_ring, 0, B44_TX_RING_BYTES);
+ 
+ 	if (bp->flags & B44_FLAG_RX_RING_HACK)
+-		ssb_dma_sync_single_for_device(bp->sdev, bp->rx_ring_dma,
+-					       DMA_TABLE_BYTES,
+-					       DMA_BIDIRECTIONAL);
++		dma_sync_single_for_device(bp->sdev->dma_dev, bp->rx_ring_dma,
++					   DMA_TABLE_BYTES, DMA_BIDIRECTIONAL);
+ 
+ 	if (bp->flags & B44_FLAG_TX_RING_HACK)
+-		ssb_dma_sync_single_for_device(bp->sdev, bp->tx_ring_dma,
+-					       DMA_TABLE_BYTES,
+-					       DMA_TO_DEVICE);
++		dma_sync_single_for_device(bp->sdev->dma_dev, bp->tx_ring_dma,
++					   DMA_TABLE_BYTES, DMA_TO_DEVICE);
+ 
+ 	for (i = 0; i < bp->rx_pending; i++) {
+ 		if (b44_alloc_rx_skb(bp, -1, i) < 0)
+@@ -1130,27 +1125,23 @@ static void b44_free_consistent(struct b
+ 	bp->tx_buffers = NULL;
+ 	if (bp->rx_ring) {
+ 		if (bp->flags & B44_FLAG_RX_RING_HACK) {
+-			ssb_dma_unmap_single(bp->sdev, bp->rx_ring_dma,
+-					     DMA_TABLE_BYTES,
+-					     DMA_BIDIRECTIONAL);
++			dma_unmap_single(bp->sdev->dma_dev, bp->rx_ring_dma,
++					 DMA_TABLE_BYTES, DMA_BIDIRECTIONAL);
+ 			kfree(bp->rx_ring);
+ 		} else
+-			ssb_dma_free_consistent(bp->sdev, DMA_TABLE_BYTES,
+-						bp->rx_ring, bp->rx_ring_dma,
+-						GFP_KERNEL);
++			dma_free_coherent(bp->sdev->dma_dev, DMA_TABLE_BYTES,
++					  bp->rx_ring, bp->rx_ring_dma);
+ 		bp->rx_ring = NULL;
+ 		bp->flags &= ~B44_FLAG_RX_RING_HACK;
+ 	}
+ 	if (bp->tx_ring) {
+ 		if (bp->flags & B44_FLAG_TX_RING_HACK) {
+-			ssb_dma_unmap_single(bp->sdev, bp->tx_ring_dma,
+-					     DMA_TABLE_BYTES,
+-					     DMA_TO_DEVICE);
++			dma_unmap_single(bp->sdev->dma_dev, bp->tx_ring_dma,
++					 DMA_TABLE_BYTES, DMA_TO_DEVICE);
+ 			kfree(bp->tx_ring);
+ 		} else
+-			ssb_dma_free_consistent(bp->sdev, DMA_TABLE_BYTES,
+-						bp->tx_ring, bp->tx_ring_dma,
+-						GFP_KERNEL);
++			dma_free_coherent(bp->sdev->dma_dev, DMA_TABLE_BYTES,
++					  bp->tx_ring, bp->tx_ring_dma);
+ 		bp->tx_ring = NULL;
+ 		bp->flags &= ~B44_FLAG_TX_RING_HACK;
+ 	}
+@@ -1175,7 +1166,8 @@ static int b44_alloc_consistent(struct b
+ 		goto out_err;
+ 
+ 	size = DMA_TABLE_BYTES;
+-	bp->rx_ring = ssb_dma_alloc_consistent(bp->sdev, size, &bp->rx_ring_dma, gfp);
++	bp->rx_ring = dma_alloc_coherent(bp->sdev->dma_dev, size,
++					 &bp->rx_ring_dma, gfp);
+ 	if (!bp->rx_ring) {
+ 		/* Allocation may have failed due to pci_alloc_consistent
+ 		   insisting on use of GFP_DMA, which is more restrictive
+@@ -1187,11 +1179,11 @@ static int b44_alloc_consistent(struct b
+ 		if (!rx_ring)
+ 			goto out_err;
+ 
+-		rx_ring_dma = ssb_dma_map_single(bp->sdev, rx_ring,
+-						 DMA_TABLE_BYTES,
+-						 DMA_BIDIRECTIONAL);
++		rx_ring_dma = dma_map_single(bp->sdev->dma_dev, rx_ring,
++					     DMA_TABLE_BYTES,
++					     DMA_BIDIRECTIONAL);
+ 
+-		if (ssb_dma_mapping_error(bp->sdev, rx_ring_dma) ||
++		if (dma_mapping_error(bp->sdev->dma_dev, rx_ring_dma) ||
+ 			rx_ring_dma + size > DMA_BIT_MASK(30)) {
+ 			kfree(rx_ring);
+ 			goto out_err;
+@@ -1202,7 +1194,8 @@ static int b44_alloc_consistent(struct b
+ 		bp->flags |= B44_FLAG_RX_RING_HACK;
+ 	}
+ 
+-	bp->tx_ring = ssb_dma_alloc_consistent(bp->sdev, size, &bp->tx_ring_dma, gfp);
++	bp->tx_ring = dma_alloc_coherent(bp->sdev->dma_dev, size,
++					 &bp->tx_ring_dma, gfp);
+ 	if (!bp->tx_ring) {
+ 		/* Allocation may have failed due to ssb_dma_alloc_consistent
+ 		   insisting on use of GFP_DMA, which is more restrictive
+@@ -1214,11 +1207,11 @@ static int b44_alloc_consistent(struct b
+ 		if (!tx_ring)
+ 			goto out_err;
+ 
+-		tx_ring_dma = ssb_dma_map_single(bp->sdev, tx_ring,
+-			                    DMA_TABLE_BYTES,
+-			                    DMA_TO_DEVICE);
++		tx_ring_dma = dma_map_single(bp->sdev->dma_dev, tx_ring,
++					     DMA_TABLE_BYTES,
++					     DMA_TO_DEVICE);
+ 
+-		if (ssb_dma_mapping_error(bp->sdev, tx_ring_dma) ||
++		if (dma_mapping_error(bp->sdev->dma_dev, tx_ring_dma) ||
+ 			tx_ring_dma + size > DMA_BIT_MASK(30)) {
+ 			kfree(tx_ring);
+ 			goto out_err;
+@@ -2176,12 +2169,14 @@ static int __devinit b44_init_one(struct
+ 			"Failed to powerup the bus\n");
+ 		goto err_out_free_dev;
+ 	}
+-	err = ssb_dma_set_mask(sdev, DMA_BIT_MASK(30));
+-	if (err) {
++
++	if (dma_set_mask(sdev->dma_dev, DMA_BIT_MASK(30)) ||
++	    dma_set_coherent_mask(sdev->dma_dev, DMA_BIT_MASK(30))) {
+ 		dev_err(sdev->dev,
+ 			"Required 30BIT DMA mask unsupported by the system\n");
+ 		goto err_out_powerdown;
+ 	}
++
+ 	err = b44_get_invariants(bp);
+ 	if (err) {
+ 		dev_err(sdev->dev,
+@@ -2344,7 +2339,6 @@ static int __init b44_init(void)
+ 	int err;
+ 
+ 	/* Setup paramaters for syncing RX/TX DMA descriptors */
+-	dma_desc_align_mask = ~(dma_desc_align_size - 1);
+ 	dma_desc_sync_size = max_t(unsigned int, dma_desc_align_size, sizeof(struct dma_desc));
+ 
+ 	err = b44_pci_init();
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -209,6 +209,24 @@ static void chipco_powercontrol_init(str
+ 	}
+ }
+ 
++/* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */
++static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc)
++{
++	struct ssb_bus *bus = cc->dev->bus;
++
++	switch (bus->chip_id) {
++	case 0x4312:
++	case 0x4322:
++	case 0x4328:
++		return 7000;
++	case 0x4325:
++		/* TODO: */
++	default:
++		return 15000;
++	}
++}
++
++/* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */
+ static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
+ {
+ 	struct ssb_bus *bus = cc->dev->bus;
+@@ -218,6 +236,12 @@ static void calc_fast_powerup_delay(stru
+ 
+ 	if (bus->bustype != SSB_BUSTYPE_PCI)
+ 		return;
++
++	if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
++		cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc);
++		return;
++	}
++
+ 	if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
+ 		return;
+ 
+@@ -235,6 +259,7 @@ void ssb_chipcommon_init(struct ssb_chip
+ 		return; /* We don't have a ChipCommon */
+ 	if (cc->dev->id.revision >= 11)
+ 		cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
++	ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
+ 	ssb_pmu_init(cc);
+ 	chipco_powercontrol_init(cc);
+ 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -502,9 +502,9 @@ static void ssb_pmu_resources_init(struc
+ 		chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
+ }
+ 
++/* http://bcm-v4.sipsolutions.net/802.11/SSB/PmuInit */
+ void ssb_pmu_init(struct ssb_chipcommon *cc)
+ {
+-	struct ssb_bus *bus = cc->dev->bus;
+ 	u32 pmucap;
+ 
+ 	if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
+@@ -516,15 +516,12 @@ void ssb_pmu_init(struct ssb_chipcommon 
+ 	ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
+ 		    cc->pmu.rev, pmucap);
+ 
+-	if (cc->pmu.rev >= 1) {
+-		if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
+-			chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+-				      ~SSB_CHIPCO_PMU_CTL_NOILPONW);
+-		} else {
+-			chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
+-				     SSB_CHIPCO_PMU_CTL_NOILPONW);
+-		}
+-	}
++	if (cc->pmu.rev == 1)
++		chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
++			      ~SSB_CHIPCO_PMU_CTL_NOILPONW);
++	else
++		chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
++			     SSB_CHIPCO_PMU_CTL_NOILPONW);
+ 	ssb_pmu_pll_init(cc);
+ 	ssb_pmu_resources_init(cc);
+ }
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -486,6 +486,7 @@ static int ssb_devices_register(struct s
+ #ifdef CONFIG_SSB_PCIHOST
+ 			sdev->irq = bus->host_pci->irq;
+ 			dev->parent = &bus->host_pci->dev;
++			sdev->dma_dev = dev->parent;
+ #endif
+ 			break;
+ 		case SSB_BUSTYPE_PCMCIA:
+@@ -501,6 +502,7 @@ static int ssb_devices_register(struct s
+ 			break;
+ 		case SSB_BUSTYPE_SSB:
+ 			dev->dma_mask = &dev->coherent_dma_mask;
++			sdev->dma_dev = dev;
+ 			break;
+ 		}
+ 
+@@ -1226,80 +1228,6 @@ u32 ssb_dma_translation(struct ssb_devic
+ }
+ EXPORT_SYMBOL(ssb_dma_translation);
+ 
+-int ssb_dma_set_mask(struct ssb_device *dev, u64 mask)
+-{
+-#ifdef CONFIG_SSB_PCIHOST
+-	int err;
+-#endif
+-
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		err = pci_set_dma_mask(dev->bus->host_pci, mask);
+-		if (err)
+-			return err;
+-		err = pci_set_consistent_dma_mask(dev->bus->host_pci, mask);
+-		return err;
+-#endif
+-	case SSB_BUSTYPE_SSB:
+-		return dma_set_mask(dev->dev, mask);
+-	default:
+-		__ssb_dma_not_implemented(dev);
+-	}
+-	return -ENOSYS;
+-}
+-EXPORT_SYMBOL(ssb_dma_set_mask);
+-
+-void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
+-				dma_addr_t *dma_handle, gfp_t gfp_flags)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		if (gfp_flags & GFP_DMA) {
+-			/* Workaround: The PCI API does not support passing
+-			 * a GFP flag. */
+-			return dma_alloc_coherent(&dev->bus->host_pci->dev,
+-						  size, dma_handle, gfp_flags);
+-		}
+-		return pci_alloc_consistent(dev->bus->host_pci, size, dma_handle);
+-#endif
+-	case SSB_BUSTYPE_SSB:
+-		return dma_alloc_coherent(dev->dev, size, dma_handle, gfp_flags);
+-	default:
+-		__ssb_dma_not_implemented(dev);
+-	}
+-	return NULL;
+-}
+-EXPORT_SYMBOL(ssb_dma_alloc_consistent);
+-
+-void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
+-			     void *vaddr, dma_addr_t dma_handle,
+-			     gfp_t gfp_flags)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		if (gfp_flags & GFP_DMA) {
+-			/* Workaround: The PCI API does not support passing
+-			 * a GFP flag. */
+-			dma_free_coherent(&dev->bus->host_pci->dev,
+-					  size, vaddr, dma_handle);
+-			return;
+-		}
+-		pci_free_consistent(dev->bus->host_pci, size,
+-				    vaddr, dma_handle);
+-		return;
+-#endif
+-	case SSB_BUSTYPE_SSB:
+-		dma_free_coherent(dev->dev, size, vaddr, dma_handle);
+-		return;
+-	default:
+-		__ssb_dma_not_implemented(dev);
+-	}
+-}
+-EXPORT_SYMBOL(ssb_dma_free_consistent);
+-
+ int ssb_bus_may_powerdown(struct ssb_bus *bus)
+ {
+ 	struct ssb_chipcommon *cc;
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -626,11 +626,22 @@ static int ssb_pci_sprom_get(struct ssb_
+ 		return -ENODEV;
+ 	}
+ 	if (bus->chipco.dev) {	/* can be unavailible! */
+-		bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ?
+-			SSB_SPROM_BASE1 : SSB_SPROM_BASE31;
++		/*
++		 * get SPROM offset: SSB_SPROM_BASE1 except for
++		 * chipcommon rev >= 31 or chip ID is 0x4312 and
++		 * chipcommon status & 3 == 2
++		 */
++		if (bus->chipco.dev->id.revision >= 31)
++			bus->sprom_offset = SSB_SPROM_BASE31;
++		else if (bus->chip_id == 0x4312 &&
++			 (bus->chipco.status & 0x03) == 2)
++			bus->sprom_offset = SSB_SPROM_BASE31;
++		else
++			bus->sprom_offset = SSB_SPROM_BASE1;
+ 	} else {
+ 		bus->sprom_offset = SSB_SPROM_BASE1;
+ 	}
++	ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
+ 
+ 	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+ 	if (!buf)
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -167,7 +167,7 @@ struct ssb_device {
+ 	 * is an optimization. */
+ 	const struct ssb_bus_ops *ops;
+ 
+-	struct device *dev;
++	struct device *dev, *dma_dev;
+ 
+ 	struct ssb_bus *bus;
+ 	struct ssb_device_id id;
+@@ -470,14 +470,6 @@ extern u32 ssb_dma_translation(struct ss
+ #define SSB_DMA_TRANSLATION_MASK	0xC0000000
+ #define SSB_DMA_TRANSLATION_SHIFT	30
+ 
+-extern int ssb_dma_set_mask(struct ssb_device *dev, u64 mask);
+-
+-extern void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
+-				       dma_addr_t *dma_handle, gfp_t gfp_flags);
+-extern void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
+-				    void *vaddr, dma_addr_t dma_handle,
+-				    gfp_t gfp_flags);
+-
+ static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev)
+ {
+ #ifdef CONFIG_SSB_DEBUG
+@@ -486,155 +478,6 @@ static inline void __cold __ssb_dma_not_
+ #endif /* DEBUG */
+ }
+ 
+-static inline int ssb_dma_mapping_error(struct ssb_device *dev, dma_addr_t addr)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		return pci_dma_mapping_error(dev->bus->host_pci, addr);
+-#endif
+-		break;
+-	case SSB_BUSTYPE_SSB:
+-		return dma_mapping_error(dev->dev, addr);
+-	default:
+-		break;
+-	}
+-	__ssb_dma_not_implemented(dev);
+-	return -ENOSYS;
+-}
+-
+-static inline dma_addr_t ssb_dma_map_single(struct ssb_device *dev, void *p,
+-					    size_t size, enum dma_data_direction dir)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		return pci_map_single(dev->bus->host_pci, p, size, dir);
+-#endif
+-		break;
+-	case SSB_BUSTYPE_SSB:
+-		return dma_map_single(dev->dev, p, size, dir);
+-	default:
+-		break;
+-	}
+-	__ssb_dma_not_implemented(dev);
+-	return 0;
+-}
+-
+-static inline void ssb_dma_unmap_single(struct ssb_device *dev, dma_addr_t dma_addr,
+-					size_t size, enum dma_data_direction dir)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		pci_unmap_single(dev->bus->host_pci, dma_addr, size, dir);
+-		return;
+-#endif
+-		break;
+-	case SSB_BUSTYPE_SSB:
+-		dma_unmap_single(dev->dev, dma_addr, size, dir);
+-		return;
+-	default:
+-		break;
+-	}
+-	__ssb_dma_not_implemented(dev);
+-}
+-
+-static inline void ssb_dma_sync_single_for_cpu(struct ssb_device *dev,
+-					       dma_addr_t dma_addr,
+-					       size_t size,
+-					       enum dma_data_direction dir)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr,
+-					    size, dir);
+-		return;
+-#endif
+-		break;
+-	case SSB_BUSTYPE_SSB:
+-		dma_sync_single_for_cpu(dev->dev, dma_addr, size, dir);
+-		return;
+-	default:
+-		break;
+-	}
+-	__ssb_dma_not_implemented(dev);
+-}
+-
+-static inline void ssb_dma_sync_single_for_device(struct ssb_device *dev,
+-						  dma_addr_t dma_addr,
+-						  size_t size,
+-						  enum dma_data_direction dir)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr,
+-					       size, dir);
+-		return;
+-#endif
+-		break;
+-	case SSB_BUSTYPE_SSB:
+-		dma_sync_single_for_device(dev->dev, dma_addr, size, dir);
+-		return;
+-	default:
+-		break;
+-	}
+-	__ssb_dma_not_implemented(dev);
+-}
+-
+-static inline void ssb_dma_sync_single_range_for_cpu(struct ssb_device *dev,
+-						     dma_addr_t dma_addr,
+-						     unsigned long offset,
+-						     size_t size,
+-						     enum dma_data_direction dir)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		/* Just sync everything. That's all the PCI API can do. */
+-		pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr,
+-					    offset + size, dir);
+-		return;
+-#endif
+-		break;
+-	case SSB_BUSTYPE_SSB:
+-		dma_sync_single_range_for_cpu(dev->dev, dma_addr, offset,
+-					      size, dir);
+-		return;
+-	default:
+-		break;
+-	}
+-	__ssb_dma_not_implemented(dev);
+-}
+-
+-static inline void ssb_dma_sync_single_range_for_device(struct ssb_device *dev,
+-							dma_addr_t dma_addr,
+-							unsigned long offset,
+-							size_t size,
+-							enum dma_data_direction dir)
+-{
+-	switch (dev->bus->bustype) {
+-	case SSB_BUSTYPE_PCI:
+-#ifdef CONFIG_SSB_PCIHOST
+-		/* Just sync everything. That's all the PCI API can do. */
+-		pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr,
+-					       offset + size, dir);
+-		return;
+-#endif
+-		break;
+-	case SSB_BUSTYPE_SSB:
+-		dma_sync_single_range_for_device(dev->dev, dma_addr, offset,
+-						 size, dir);
+-		return;
+-	default:
+-		break;
+-	}
+-	__ssb_dma_not_implemented(dev);
+-}
+-
+-
+ #ifdef CONFIG_SSB_PCIHOST
+ /* PCI-host wrapper driver */
+ extern int ssb_pcihost_register(struct pci_driver *driver);

target/linux/generic/patches-2.6.35/976-ssb_add_dma_dev.patch

@@ -1,52 +0,0 @@
-From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
-
-Add dma_dev, a pointer to struct device, to struct ssb_device.  We pass it
-to the generic DMA API with SSB_BUSTYPE_PCI and SSB_BUSTYPE_SSB. 
-ssb_devices_register() sets up it properly.
-
-This is preparation for replacing the ssb bus specific DMA API (ssb_dma_*)
-with the generic DMA API.
-
-Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
-Acked-by: Michael Buesch <mb@bu3sch.de>
-Cc: Gary Zambrano <zambrano@broadcom.com>
-Cc: Stefano Brivio <stefano.brivio@polimi.it>
-Cc: Larry Finger <Larry.Finger@lwfinger.net>
-Cc: John W. Linville <linville@tuxdriver.com>
-Acked-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
----
-
- drivers/ssb/main.c      |    2 ++
- include/linux/ssb/ssb.h |    2 +-
- 2 files changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -486,6 +486,7 @@ static int ssb_devices_register(struct s
- #ifdef CONFIG_SSB_PCIHOST
- 			sdev->irq = bus->host_pci->irq;
- 			dev->parent = &bus->host_pci->dev;
-+			sdev->dma_dev = dev->parent;
- #endif
- 			break;
- 		case SSB_BUSTYPE_PCMCIA:
-@@ -501,6 +502,7 @@ static int ssb_devices_register(struct s
- 			break;
- 		case SSB_BUSTYPE_SSB:
- 			dev->dma_mask = &dev->coherent_dma_mask;
-+			sdev->dma_dev = dev;
- 			break;
- 		}
- 
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -167,7 +167,7 @@ struct ssb_device {
- 	 * is an optimization. */
- 	const struct ssb_bus_ops *ops;
- 
--	struct device *dev;
-+	struct device *dev, *dma_dev;
- 
- 	struct ssb_bus *bus;
- 	struct ssb_device_id id;