ipq806x: refresh config

Based on "make kernel_menuconfig CONFIG_TARGET=generic" and 5.4.49

CONFIG_LEDS_TRIGGER_DISK has been removed by the refresh and added
back manually in order to not revert f93fcf8923 ("ipq806x: enable
disk-activity LED trigger").

Signed-off-by: John Audia <graysky@archlinux.us>
[extend commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

target/linux/ipq806x/config-5.4

@@ -49,7 +49,6 @@ CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ARCH_TIMER=y
 CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
 # CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
 CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
 CONFIG_ARM_CPUIDLE=y
@@ -59,7 +58,6 @@ CONFIG_ARM_GIC=y
 CONFIG_ARM_HAS_SG_CHAIN=y
 CONFIG_ARM_L1_CACHE_SHIFT=6
 CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
 CONFIG_ARM_MODULE_PLTS=y
 CONFIG_ARM_PATCH_IDIV=y
 CONFIG_ARM_PATCH_PHYS_VIRT=y
@@ -67,9 +65,7 @@ CONFIG_ARM_PATCH_PHYS_VIRT=y
 CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
 CONFIG_ARM_QCOM_CPUIDLE=y
 # CONFIG_ARM_SMMU is not set
-# CONFIG_ARM_SP805_WATCHDOG is not set
 CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
 CONFIG_ARM_UNWIND=y
 CONFIG_ARM_VIRT_EXT=y
 CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
@@ -89,8 +85,6 @@ CONFIG_CPUFREQ_DT_PLATDEV=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_32v7=y
 CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_CPU_CACHE_V7=y
 CONFIG_CPU_CACHE_VIPT=y
 CONFIG_CPU_COPY_V6=y
@@ -108,8 +102,6 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
@@ -151,7 +143,6 @@ CONFIG_CRYPTO_ZSTD=y
 CONFIG_DCACHE_WORD_ACCESS=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_USER is not set
 CONFIG_DMADEVICES=y
 CONFIG_DMA_ENGINE=y
 CONFIG_DMA_OF=y
@@ -159,13 +150,13 @@ CONFIG_DMA_REMAP=y
 CONFIG_DMA_VIRTUAL_CHANNELS=y
 CONFIG_DTC=y
 CONFIG_DT_IDLE_STATES=y
-# CONFIG_DWMAC_DWC_QOS_ETH is not set
 # CONFIG_DWMAC_GENERIC is not set
 CONFIG_DWMAC_IPQ806X=y
 # CONFIG_DWMAC_QCOM_ETHQOS is not set
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_EDAC_ATOMIC_SCRUB=y
 CONFIG_EDAC_SUPPORT=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
 CONFIG_FIXED_PHY=y
 CONFIG_FIX_EARLYCON_MEM=y
 CONFIG_FW_LOADER_PAGED_BUF=y
@@ -195,6 +186,7 @@ CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIOLIB_IRQCHIP=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_GRO_CELLS=y
 CONFIG_HANDLE_DOMAIN_IRQ=y
 CONFIG_HARDEN_BRANCH_PREDICTOR=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -249,6 +241,8 @@ CONFIG_HWMON=y
 CONFIG_HWSPINLOCK=y
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_HW_RANDOM=y
+CONFIG_HZ=100
+CONFIG_HZ_100=y
 CONFIG_HZ_FIXED=0
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
@@ -365,7 +359,6 @@ CONFIG_PAGE_POOL=y
 CONFIG_PCI=y
 CONFIG_PCIEAER=y
 CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIE_BW is not set
 CONFIG_PCIE_DW=y
 CONFIG_PCIE_DW_HOST=y
 CONFIG_PCIE_QCOM=y
@@ -460,6 +453,7 @@ CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 # CONFIG_SDM_CAMCC_845 is not set
 # CONFIG_SDM_DISPCC_845 is not set
@@ -469,7 +463,6 @@ CONFIG_RWSEM_SPIN_ON_OWNER=y
 # CONFIG_SDM_LPASSCC_845 is not set
 # CONFIG_SDM_VIDEOCC_845 is not set
 CONFIG_SERIAL_8250_FSL=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
 CONFIG_SERIAL_MCTRL_GPIO=y
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
@@ -500,7 +493,6 @@ CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
 CONFIG_THERMAL_GOV_STEP_WISE=y
 CONFIG_THERMAL_HWMON=y
 CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_TIMER_OF=y
 CONFIG_TIMER_PROBE=y
@@ -514,10 +506,8 @@ CONFIG_UBIFS_FS_ZSTD=y
 CONFIG_UEVENT_HELPER_PATH=""
 CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
 CONFIG_UNWINDER_ARM=y
-# CONFIG_UNWINDER_FRAME_POINTER is not set
 CONFIG_USB=y
 CONFIG_USB_COMMON=y
-# CONFIG_USB_EHCI_HCD is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USE_OF=y
 CONFIG_VDSO=y