hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

mxs: forward-port regulator patches into 4.4 

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48559
lede-17.01
Zoltan Herpai 2016-01-30 12:05:49 +00:00
parent beda11255b
commit 4668d7c572
5 changed files with 846 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
target/linux/mxs/patches-4.4/100-mxs-select-syscon.patch Normal file
View File

@ -0,0 +1,10 @@
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -17,6 +17,7 @@ config ARCH_MXS
depends on ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
+ select MFD_SYSCON
select PINCTRL
select SOC_BUS
select SOC_IMX23

166
target/linux/mxs/patches-4.4/101-mxs-add-mxs_power.patch Normal file
View File

@ -0,0 +1,166 @@
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -43,6 +43,14 @@ config MAX8925_POWER
Say Y here to enable support for the battery charger in the Maxim
MAX8925 PMIC.
+config MXS_POWER
+ tristate "Freescale MXS power subsystem support"
+ depends on ARCH_MXS || COMPILE_TEST
+ help
+ Say Y here to enable support for the Freescale i.MX23/i.MX28
+ power subsystem. This is a requirement to get access to on-chip
+ regulators, battery charger and many more.
+
config WM831X_BACKUP
tristate "WM831X backup battery charger support"
depends on MFD_WM831X
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_GENERIC_ADC_BATTERY) += gen
obj-$(CONFIG_PDA_POWER) += pda_power.o
obj-$(CONFIG_APM_POWER) += apm_power.o
obj-$(CONFIG_MAX8925_POWER) += max8925_power.o
+obj-$(CONFIG_MXS_POWER) += mxs_power.o
obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o
obj-$(CONFIG_WM831X_POWER) += wm831x_power.o
obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
--- /dev/null
+++ b/drivers/power/mxs_power.c
@@ -0,0 +1,136 @@
+/*
+ * Freescale MXS power subsystem
+ *
+ * Copyright (C) 2014 Stefan Wahren
+ *
+ * Inspired by imx-bootlets
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/stmp_device.h>
+#include <linux/types.h>
+
+#define BM_POWER_CTRL_POLARITY_VBUSVALID BIT(5)
+#define BM_POWER_CTRL_VBUSVALID_IRQ BIT(4)
+#define BM_POWER_CTRL_ENIRQ_VBUS_VALID BIT(3)
+
+#define HW_POWER_5VCTRL_OFFSET 0x10
+
+#define BM_POWER_5VCTRL_VBUSVALID_THRESH (7 << 8)
+#define BM_POWER_5VCTRL_PWDN_5VBRNOUT BIT(7)
+#define BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT BIT(6)
+#define BM_POWER_5VCTRL_VBUSVALID_5VDETECT BIT(4)
+
+#define HW_POWER_5VCTRL_VBUSVALID_THRESH_4_40V (5 << 8)
+
+struct mxs_power_data {
+ void __iomem *base_addr;
+ struct power_supply *ac;
+};
+
+static enum power_supply_property mxs_power_ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int mxs_power_ac_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = 1;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static const struct of_device_id of_mxs_power_match[] = {
+ { .compatible = "fsl,imx23-power" },
+ { .compatible = "fsl,imx28-power" },
+ { /* end */ }
+};
+MODULE_DEVICE_TABLE(of, of_mxs_power_match);
+
+static const struct power_supply_desc ac_desc = {
+ .properties = mxs_power_ac_props,
+ .num_properties = ARRAY_SIZE(mxs_power_ac_props),
+ .get_property = mxs_power_ac_get_property,
+ .name = "ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+};
+
+static int mxs_power_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct resource *res;
+ struct mxs_power_data *data;
+ struct power_supply_config psy_cfg = {};
+ void __iomem *v5ctrl_addr;
+
+ if (!np) {
+ dev_err(dev, "missing device tree\n");
+ return -EINVAL;
+ }
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->base_addr = devm_ioremap_resource(dev, res);
+ if (IS_ERR(data->base_addr))
+ return PTR_ERR(data->base_addr);
+
+ psy_cfg.drv_data = data;
+
+ data->ac = devm_power_supply_register(dev, &ac_desc, &psy_cfg);
+ if (IS_ERR(data->ac))
+ return PTR_ERR(data->ac);
+
+ platform_set_drvdata(pdev, data);
+
+ v5ctrl_addr = data->base_addr + HW_POWER_5VCTRL_OFFSET;
+
+ /* Make sure the current limit of the linregs are disabled. */
+ writel(BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT,
+ v5ctrl_addr + STMP_OFFSET_REG_CLR);
+
+ return of_platform_populate(np, NULL, NULL, dev);
+}
+
+static struct platform_driver mxs_power_driver = {
+ .driver = {
+ .name = "mxs_power",
+ .of_match_table = of_mxs_power_match,
+ },
+ .probe = mxs_power_probe,
+};
+
+module_platform_driver(mxs_power_driver);
+
+MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>");
+MODULE_DESCRIPTION("Freescale MXS power subsystem");
+MODULE_LICENSE("GPL v2");

570
target/linux/mxs/patches-4.4/102-mxs-add-regulator-driver.patch Normal file
View File

@ -0,0 +1,570 @@
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -450,6 +450,14 @@ config REGULATOR_MT6397
This driver supports the control of different power rails of device
through regulator interface.
+config REGULATOR_MXS
+ tristate "Freescale MXS on-chip regulators"
+ depends on (MXS_POWER || COMPILE_TEST)
+ help
+ Say y here to support Freescale MXS on-chip regulators.
+ It is recommended that this option be enabled on i.MX23,
+ i.MX28 platform.
+
config REGULATOR_PALMAS
tristate "TI Palmas PMIC Regulators"
depends on MFD_PALMAS
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc137
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
+obj-$(CONFIG_REGULATOR_MXS) += mxs-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
--- /dev/null
+++ b/drivers/regulator/mxs-regulator.c
@@ -0,0 +1,540 @@
+/*
+ * Freescale MXS on-chip regulators
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright (C) 2014 Stefan Wahren
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * Inspired by imx-bootlets
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/slab.h>
+
+/* Powered by linear regulator. DCDC output is gated off and
+ the linreg output is equal to the target. */
+#define HW_POWER_LINREG_DCDC_OFF 1
+
+/* Powered by linear regulator. DCDC output is not gated off
+ and is ready for the automatic hardware transistion after a 5V
+ event. The converters are not enabled when 5V is present. LinReg output
+ is 25mV below target. */
+#define HW_POWER_LINREG_DCDC_READY 2
+
+/* Powered by DCDC converter and the LinReg is on. LinReg output
+ is 25mV below target. */
+#define HW_POWER_DCDC_LINREG_ON 3
+
+/* Powered by DCDC converter and the LinReg is off. LinReg output
+ is 25mV below target. */
+#define HW_POWER_DCDC_LINREG_OFF 4
+
+/* Powered by DCDC converter and the LinReg is ready for the
+ automatic hardware transfer. The LinReg output is not enabled and
+ depends on the 5V presence to enable the LinRegs. LinReg offset is 25mV
+ below target. */
+#define HW_POWER_DCDC_LINREG_READY 5
+
+/* Powered by an external source when 5V is present. This does not
+ necessarily mean the external source is powered by 5V,but the chip needs
+ to be aware that 5V is present. */
+#define HW_POWER_EXTERNAL_SOURCE_5V 6
+
+/* Powered by an external source when 5V is not present.This doesn't
+ necessarily mean the external source is powered by the battery, but the
+ chip needs to be aware that the battery is present */
+#define HW_POWER_EXTERNAL_SOURCE_BATTERY 7
+
+/* Unknown configuration. This is an error. */
+#define HW_POWER_UNKNOWN_SOURCE 8
+
+/* TODO: Move power register offsets into header file */
+#define HW_POWER_5VCTRL 0x00000010
+#define HW_POWER_VDDDCTRL 0x00000040
+#define HW_POWER_VDDACTRL 0x00000050
+#define HW_POWER_VDDIOCTRL 0x00000060
+#define HW_POWER_MISC 0x00000090
+#define HW_POWER_STS 0x000000c0
+
+#define BM_POWER_STS_VBUSVALID0_STATUS BIT(15)
+#define BM_POWER_STS_DC_OK BIT(9)
+
+#define BM_POWER_5VCTRL_ILIMIT_EQ_ZERO BIT(2)
+#define BM_POWER_5VCTRL_ENABLE_DCDC BIT(0)
+
+#define BM_POWER_LINREG_OFFSET_DCDC_MODE BIT(1)
+
+#define SHIFT_FREQSEL 4
+
+#define BM_POWER_MISC_FREQSEL (7 << SHIFT_FREQSEL)
+
+/* Recommended DC-DC clock source values */
+#define HW_POWER_MISC_FREQSEL_20000_KHZ 1
+#define HW_POWER_MISC_FREQSEL_24000_KHZ 2
+#define HW_POWER_MISC_FREQSEL_19200_KHZ 3
+
+#define HW_POWER_MISC_SEL_PLLCLK BIT(0)
+
+/* Regulator IDs */
+#define MXS_DCDC 1
+#define MXS_VDDIO 2
+#define MXS_VDDA 3
+#define MXS_VDDD 4
+
+struct mxs_reg_info {
+ /* regulator descriptor */
+ struct regulator_desc desc;
+
+ /* regulator control register */
+ int ctrl_reg;
+
+ /* disable DC-DC output */
+ unsigned int disable_fet_mask;
+
+ /* steps between linreg output and DC-DC target */
+ unsigned int linreg_offset_mask;
+ u8 linreg_offset_shift;
+
+ /* function which determine power source */
+ u8 (*get_power_source)(struct regulator_dev *);
+};
+
+static inline u8 get_linreg_offset(struct mxs_reg_info *ldo, u32 regs)
+{
+ return (regs & ldo->linreg_offset_mask) >> ldo->linreg_offset_shift;
+}
+
+static u8 get_vddio_power_source(struct regulator_dev *reg)
+{
+ struct mxs_reg_info *ldo = rdev_get_drvdata(reg);
+ u32 v5ctrl, status, base;
+ u8 offset;
+
+ if (regmap_read(reg->regmap, HW_POWER_5VCTRL, &v5ctrl))
+ return HW_POWER_UNKNOWN_SOURCE;
+
+ if (regmap_read(reg->regmap, HW_POWER_STS, &status))
+ return HW_POWER_UNKNOWN_SOURCE;
+
+ if (regmap_read(reg->regmap, ldo->ctrl_reg, &base))
+ return HW_POWER_UNKNOWN_SOURCE;
+
+ offset = get_linreg_offset(ldo, base);
+
+ /* If VBUS valid then 5 V power supply present */
+ if (status & BM_POWER_STS_VBUSVALID0_STATUS) {
+ /* Powered by Linreg, DC-DC is off */
+ if ((base & ldo->disable_fet_mask) &&
+ !(offset & BM_POWER_LINREG_OFFSET_DCDC_MODE)) {
+ return HW_POWER_LINREG_DCDC_OFF;
+ }
+
+ if (v5ctrl & BM_POWER_5VCTRL_ENABLE_DCDC) {
+ /* Powered by DC-DC, Linreg is on */
+ if (offset & BM_POWER_LINREG_OFFSET_DCDC_MODE)
+ return HW_POWER_DCDC_LINREG_ON;
+ } else {
+ /* Powered by Linreg, DC-DC is off */
+ if (!(offset & BM_POWER_LINREG_OFFSET_DCDC_MODE))
+ return HW_POWER_LINREG_DCDC_OFF;
+ }
+ } else {
+ /* Powered by DC-DC, Linreg is on */
+ if (offset & BM_POWER_LINREG_OFFSET_DCDC_MODE)
+ return HW_POWER_DCDC_LINREG_ON;
+ }
+
+ return HW_POWER_UNKNOWN_SOURCE;
+}
+
+static u8 get_vdda_vddd_power_source(struct regulator_dev *reg)
+{
+ struct mxs_reg_info *ldo = rdev_get_drvdata(reg);
+ struct regulator_desc *desc = &ldo->desc;
+ u32 v5ctrl, status, base;
+ u8 offset;
+
+ if (regmap_read(reg->regmap, HW_POWER_5VCTRL, &v5ctrl))
+ return HW_POWER_UNKNOWN_SOURCE;
+
+ if (regmap_read(reg->regmap, HW_POWER_STS, &status))
+ return HW_POWER_UNKNOWN_SOURCE;
+
+ if (regmap_read(reg->regmap, ldo->ctrl_reg, &base))
+ return HW_POWER_UNKNOWN_SOURCE;
+
+ offset = get_linreg_offset(ldo, base);
+
+ /* DC-DC output is disabled */
+ if (base & ldo->disable_fet_mask) {
+ /* Powered by 5 V supply */
+ if (status & BM_POWER_STS_VBUSVALID0_STATUS)
+ return HW_POWER_EXTERNAL_SOURCE_5V;
+
+ /* Powered by Linreg, DC-DC is off */
+ if (!(offset & BM_POWER_LINREG_OFFSET_DCDC_MODE))
+ return HW_POWER_LINREG_DCDC_OFF;
+ }
+
+ /* If VBUS valid then 5 V power supply present */
+ if (status & BM_POWER_STS_VBUSVALID0_STATUS) {
+ /* Powered by DC-DC, Linreg is on */
+ if (v5ctrl & BM_POWER_5VCTRL_ENABLE_DCDC)
+ return HW_POWER_DCDC_LINREG_ON;
+
+ /* Powered by Linreg, DC-DC is off */
+ return HW_POWER_LINREG_DCDC_OFF;
+ }
+
+ /* DC-DC is on */
+ if (offset & BM_POWER_LINREG_OFFSET_DCDC_MODE) {
+ /* Powered by DC-DC, Linreg is on */
+ if (base & desc->enable_mask)
+ return HW_POWER_DCDC_LINREG_ON;
+
+ /* Powered by DC-DC, Linreg is off */
+ return HW_POWER_DCDC_LINREG_OFF;
+ }
+
+ return HW_POWER_UNKNOWN_SOURCE;
+}
+
+static int mxs_set_dcdc_freq(struct regulator_dev *reg, u32 hz)
+{
+ struct mxs_reg_info *dcdc = rdev_get_drvdata(reg);
+ u32 val;
+ int ret;
+
+ if (dcdc->desc.id != MXS_DCDC) {
+ dev_warn(&reg->dev, "Setting switching freq is not supported\n");
+ return -EINVAL;
+ }
+
+ ret = regmap_read(reg->regmap, HW_POWER_MISC, &val);
+ if (ret)
+ return ret;
+
+ val &= ~BM_POWER_MISC_FREQSEL;
+ val &= ~HW_POWER_MISC_SEL_PLLCLK;
+
+ /*
+ * Select the PLL/PFD based frequency that the DC-DC converter uses.
+ * The actual switching frequency driving the power inductor is
+ * DCDC_CLK/16. Accept only values recommend by Freescale.
+ */
+ switch (hz) {
+ case 1200000:
+ val |= HW_POWER_MISC_FREQSEL_19200_KHZ << SHIFT_FREQSEL;
+ break;
+ case 1250000:
+ val |= HW_POWER_MISC_FREQSEL_20000_KHZ << SHIFT_FREQSEL;
+ break;
+ case 1500000:
+ val |= HW_POWER_MISC_FREQSEL_24000_KHZ << SHIFT_FREQSEL;
+ break;
+ default:
+ dev_warn(&reg->dev, "Switching freq: %u Hz not supported\n",
+ hz);
+ return -EINVAL;
+ }
+
+ /* First program FREQSEL */
+ ret = regmap_write(reg->regmap, HW_POWER_MISC, val);
+ if (ret)
+ return ret;
+
+ /* then set PLL as clock for DC-DC converter */
+ val |= HW_POWER_MISC_SEL_PLLCLK;
+
+ return regmap_write(reg->regmap, HW_POWER_MISC, val);
+}
+
+static int mxs_ldo_set_voltage_sel(struct regulator_dev *reg, unsigned sel)
+{
+ struct mxs_reg_info *ldo = rdev_get_drvdata(reg);
+ struct regulator_desc *desc = &ldo->desc;
+ u32 status = 0;
+ int timeout;
+ int ret;
+
+ ret = regmap_update_bits(reg->regmap, desc->vsel_reg, desc->vsel_mask,
+ sel);
+ if (ret)
+ return ret;
+
+ if (ldo->get_power_source) {
+ switch (ldo->get_power_source(reg)) {
+ case HW_POWER_LINREG_DCDC_OFF:
+ case HW_POWER_LINREG_DCDC_READY:
+ case HW_POWER_EXTERNAL_SOURCE_5V:
+ /*
+ * Since the DC-DC converter is off we can't
+ * trigger on DC_OK. So wait at least 1 ms
+ * for stabilization.
+ */
+ usleep_range(1000, 2000);
+ return 0;
+ }
+ }
+
+ /* Make sure DC_OK has changed */
+ usleep_range(15, 20);
+
+ for (timeout = 0; timeout < 20; timeout++) {
+ ret = regmap_read(reg->regmap, HW_POWER_STS, &status);
+
+ if (ret)
+ break;
+
+ /* DC-DC converter control loop has stabilized */
+ if (status & BM_POWER_STS_DC_OK)
+ return 0;
+
+ udelay(1);
+ }
+
+ if (!ret)
+ dev_warn_ratelimited(&reg->dev, "%s: timeout status=0x%08x\n",
+ __func__, status);
+
+ msleep(20);
+
+ return -ETIMEDOUT;
+}
+
+static int mxs_ldo_is_enabled(struct regulator_dev *reg)
+{
+ struct mxs_reg_info *ldo = rdev_get_drvdata(reg);
+
+ if (ldo->get_power_source) {
+ switch (ldo->get_power_source(reg)) {
+ case HW_POWER_LINREG_DCDC_OFF:
+ case HW_POWER_LINREG_DCDC_READY:
+ case HW_POWER_DCDC_LINREG_ON:
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static struct regulator_ops mxs_dcdc_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+static struct regulator_ops mxs_ldo_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .set_voltage_sel = mxs_ldo_set_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .is_enabled = mxs_ldo_is_enabled,
+};
+
+static const struct mxs_reg_info mxs_info_dcdc = {
+ .desc = {
+ .name = "dcdc",
+ .id = MXS_DCDC,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .ops = &mxs_dcdc_ops,
+ .enable_reg = HW_POWER_STS,
+ .enable_mask = (1 << 0),
+ },
+};
+
+static const struct mxs_reg_info imx23_info_vddio = {
+ .desc = {
+ .name = "vddio",
+ .id = MXS_VDDIO,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = 0x20,
+ .uV_step = 25000,
+ .linear_min_sel = 0,
+ .min_uV = 2800000,
+ .vsel_reg = HW_POWER_VDDIOCTRL,
+ .vsel_mask = 0x1f,
+ .ops = &mxs_ldo_ops,
+ },
+ .ctrl_reg = HW_POWER_VDDIOCTRL,
+ .disable_fet_mask = 1 << 16,
+ .linreg_offset_mask = 3 << 12,
+ .linreg_offset_shift = 12,
+ .get_power_source = get_vddio_power_source,
+};
+
+static const struct mxs_reg_info imx28_info_vddio = {
+ .desc = {
+ .name = "vddio",
+ .id = MXS_VDDIO,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = 0x11,
+ .uV_step = 50000,
+ .linear_min_sel = 0,
+ .min_uV = 2800000,
+ .vsel_reg = HW_POWER_VDDIOCTRL,
+ .vsel_mask = 0x1f,
+ .ops = &mxs_ldo_ops,
+ },
+ .ctrl_reg = HW_POWER_VDDIOCTRL,
+ .disable_fet_mask = 1 << 16,
+ .linreg_offset_mask = 3 << 12,
+ .linreg_offset_shift = 12,
+ .get_power_source = get_vddio_power_source,
+};
+
+static const struct mxs_reg_info mxs_info_vdda = {
+ .desc = {
+ .name = "vdda",
+ .id = MXS_VDDA,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = 0x20,
+ .uV_step = 25000,
+ .linear_min_sel = 0,
+ .min_uV = 1500000,
+ .vsel_reg = HW_POWER_VDDACTRL,
+ .vsel_mask = 0x1f,
+ .ops = &mxs_ldo_ops,
+ .enable_mask = (1 << 17),
+ },
+ .ctrl_reg = HW_POWER_VDDACTRL,
+ .disable_fet_mask = 1 << 16,
+ .linreg_offset_mask = 3 << 12,
+ .linreg_offset_shift = 12,
+ .get_power_source = get_vdda_vddd_power_source,
+};
+
+static const struct mxs_reg_info mxs_info_vddd = {
+ .desc = {
+ .name = "vddd",
+ .id = MXS_VDDD,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = 0x20,
+ .uV_step = 25000,
+ .linear_min_sel = 0,
+ .min_uV = 800000,
+ .vsel_reg = HW_POWER_VDDDCTRL,
+ .vsel_mask = 0x1f,
+ .ops = &mxs_ldo_ops,
+ .enable_mask = (1 << 21),
+ },
+ .ctrl_reg = HW_POWER_VDDDCTRL,
+ .disable_fet_mask = 1 << 20,
+ .linreg_offset_mask = 3 << 16,
+ .linreg_offset_shift = 16,
+ .get_power_source = get_vdda_vddd_power_source,
+};
+
+static const struct of_device_id of_mxs_regulator_match[] = {
+ { .compatible = "fsl,imx23-dcdc", .data = &mxs_info_dcdc },
+ { .compatible = "fsl,imx28-dcdc", .data = &mxs_info_dcdc },
+ { .compatible = "fsl,imx23-vddio", .data = &imx23_info_vddio },
+ { .compatible = "fsl,imx23-vdda", .data = &mxs_info_vdda },
+ { .compatible = "fsl,imx23-vddd", .data = &mxs_info_vddd },
+ { .compatible = "fsl,imx28-vddio", .data = &imx28_info_vddio },
+ { .compatible = "fsl,imx28-vdda", .data = &mxs_info_vdda },
+ { .compatible = "fsl,imx28-vddd", .data = &mxs_info_vddd },
+ { /* end */ }
+};
+MODULE_DEVICE_TABLE(of, of_mxs_regulator_match);
+
+static int mxs_regulator_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *match;
+ struct device_node *parent_np;
+ struct regulator_dev *rdev = NULL;
+ struct mxs_reg_info *info;
+ struct regulator_init_data *initdata;
+ struct regulator_config config = { };
+ u32 switch_freq;
+
+ match = of_match_device(of_mxs_regulator_match, dev);
+ if (!match) {
+ /* We do not expect this to happen */
+ dev_err(dev, "%s: Unable to match device\n", __func__);
+ return -ENODEV;
+ }
+
+ info = devm_kmemdup(dev, match->data, sizeof(struct mxs_reg_info),
+ GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ initdata = of_get_regulator_init_data(dev, dev->of_node, &info->desc);
+ if (!initdata) {
+ dev_err(dev, "missing regulator init data\n");
+ return -EINVAL;
+ }
+
+ parent_np = of_get_parent(dev->of_node);
+ if (!parent_np)
+ return -ENODEV;
+ config.regmap = syscon_node_to_regmap(parent_np);
+ of_node_put(parent_np);
+ if (IS_ERR(config.regmap))
+ return PTR_ERR(config.regmap);
+
+ config.dev = dev;
+ config.init_data = initdata;
+ config.driver_data = info;
+ config.of_node = dev->of_node;
+
+ rdev = devm_regulator_register(dev, &info->desc, &config);
+ if (IS_ERR(rdev)) {
+ int ret = PTR_ERR(rdev);
+
+ dev_err(dev, "%s: failed to register regulator(%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ if (!of_property_read_u32(dev->of_node, "switching-frequency",
+ &switch_freq))
+ mxs_set_dcdc_freq(rdev, switch_freq);
+
+ platform_set_drvdata(pdev, rdev);
+
+ return 0;
+}
+
+static struct platform_driver mxs_regulator_driver = {
+ .driver = {
+ .name = "mxs_regulator",
+ .of_match_table = of_mxs_regulator_match,
+ },
+ .probe = mxs_regulator_probe,
+};
+
+module_platform_driver(mxs_regulator_driver);
+
+MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>");
+MODULE_DESCRIPTION("Freescale MXS regulators");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:mxs_regulator");

100
target/linux/mxs/patches-4.4/103-dt-enable-regulator.patch Normal file
View File

@ -0,0 +1,100 @@
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -404,8 +404,46 @@
};
power@80044000 {
+ compatible = "fsl,imx23-power", "syscon";
reg = <0x80044000 0x2000>;
- status = "disabled";
+ interrupts = <3>;
+
+ dcdc: regulator@1 {
+ compatible = "fsl,imx23-dcdc";
+ regulator-name = "dcdc";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vddd: regulator@2 {
+ compatible = "fsl,imx23-vddd";
+ regulator-name = "vddd";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1550000>;
+ vddd-supply = <&reg_vdda>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vdda: regulator@3 {
+ compatible = "fsl,imx23-vdda";
+ regulator-name = "vdda";
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <1950000>;
+ vdda-supply = <&reg_vddio>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vddio: regulator@4 {
+ compatible = "fsl,imx23-vddio";
+ regulator-name = "vddio";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3575000>;
+ regulator-microvolt-offset = <80000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
saif1: saif@80046000 {
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -1035,8 +1035,46 @@
};
power: power@80044000 {
+ compatible = "fsl,imx28-power", "syscon";
reg = <0x80044000 0x2000>;
- status = "disabled";
+ interrupts = <6>;
+
+ dcdc: regulator@1 {
+ compatible = "fsl,imx28-dcdc";
+ regulator-name = "dcdc";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vddd: regulator@2 {
+ compatible = "fsl,imx28-vddd";
+ regulator-name = "vddd";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1550000>;
+ vddd-supply = <&reg_vdda>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vdda: regulator@3 {
+ compatible = "fsl,imx28-vdda";
+ regulator-name = "vdda";
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <1950000>;
+ vdda-supply = <&reg_vddio>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vddio: regulator@4 {
+ compatible = "fsl,imx28-vddio";
+ regulator-name = "vddio";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3550000>;
+ regulator-microvolt-offset = <80000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
saif1: saif@80046000 {

0
target/linux/mxs/patches-4.4/100-crypto-mxsdcp-provide-importexport.patch → target/linux/mxs/patches-4.4/110-crypto-mxsdcp-provide-importexport.patch
View File