hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ath79: Add wifi to WNDR3700, WNDR3700v2 and WNDR3800 

Add ath9k wifi capabilities to WNDR3700 family.

* use kmod-owl-loader to load firmware from "art"
* add wifi to DTS
* add wifi LEDs

Avoid using the same MAC for eth0 LAN and wlan0 by
toggling the eth0 MAC into a locally administered MAC.
That is currently done by in user-space by adding a
uci config item into /etc/config/network
(More elegant solution might be setting it already in
preinit phase.)

Known issues:

* wifi firmware file may not get created on the first boot
  after flashing on time to bring wifi normally up. Likely
  the overlay jffs2 is not yet ready for creating the
  firmware file. "wifi up" may still bring wifi up.
  Wifi will work normally at subsequent boots.

* phy0 and phy1 may get assigned mixed, so that phy0 may
  be the 5GHz radio instead of the normal 2.4GHz, and vice
  versa for phy1. Does not happen always, but may happen.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
[fix the wifi unit address in the dts]
Signed-off-by: Mathias Kresin <dev@kresin.me>
openwrt-19.07
Hannu Nyman 2018-08-13 23:10:47 +03:00 committed by Mathias Kresin
parent b2a33d5463
commit 437e35f8a3
4 changed files with 50 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
target/linux/ath79/base-files/etc/board.d/02_network
View File

@ -160,6 +160,11 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
;;
netgear,wndr3700|\
netgear,wndr3700v2|\
netgear,wndr3800)
lan_mac=$(macaddr_setbit_la "$(mtd_get_mac_binary art 0)")
;;
phicomm,k2t)
lan_mac=$(k2t_get_mac "lan_mac")
wan_mac=$(k2t_get_mac "wan_mac")

10
target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@ -146,6 +146,11 @@ case "$FIRMWARE" in
ath9k_eeprom_extract "caldata" 4096 3768
ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 65440) 524
;;
netgear,wndr3700|\
netgear,wndr3700v2|\
netgear,wndr3800)
ath9k_eeprom_extract "art" 4096 3768
;;
*)
ath9k_eeprom_die "board $board is not supported yet"
;;
@ -157,6 +162,11 @@ case "$FIRMWARE" in
ath9k_eeprom_extract "caldata" 20480 3768
ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 65460) 1) 524
;;
netgear,wndr3700|\
netgear,wndr3700v2|\
netgear,wndr3800)
ath9k_eeprom_extract "art" 20480 3768
;;
*)
ath9k_eeprom_die "board $board is not supported yet"
;;

34
target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi
View File

@ -67,6 +67,22 @@
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan2g {
label = "netgear:green:wlan2g";
gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "netgear:blue:wlan5g";
gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy1tpt";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <100>;
@ -138,6 +154,24 @@
&pcie0 {
status = "okay";
ath9k0: wifi@0,11 {
compatible = "pci168c,0029";
reg = <0x8800 0 0 0 0x10000>;
mtd-mac-address = <&art 0x0>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
ath9k1: wifi@0,12 {
compatible = "pci168c,0029";
reg = <0x9000 0 0 0 0x10000>;
mtd-mac-address = <&art 0xc>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};
&uart {

2
target/linux/ath79/image/generic.mk
View File

@ -141,7 +141,7 @@ define Device/netgear_wndr3x00
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset kmod-owl-loader
endef
define Device/netgear_wndr3700